hot halves hot runner systems including mould plates t a€¦ · complete half of a mould, hot...
TRANSCRIPT
For design and application information,
see the Synventive Hot Runner Guide.
2006-08-23 - All rights reserved. Errors and omissions excepted.
For a specific application, please consult Synventive.
Illustrations simplified, schematically drawn and not to scale.
Hot Halves C P
T A
CCompany
PProducts
AApplication
TTechnology
Hot Runner Systems including Mould Plates
Hot Halves
7
8
9
1
5
6
2
3
4
For design and application information,
see the Synventive Hot Runner Guide.
2006-08-23 - All rights reserved. Errors and omissions excepted.
For a specific application, please consult Synventive.
Illustrations simplified, schematically drawn and not to scale.
Hot Halves
Overview
Product type
Components
In the form of Hot Halves, the pre-stage of a
complete half of a mould, hot runner systems
are supplied completely mounted in mould
plates, pre-wired, pre-piped if required and fully
adjusted.
Design and layout of Hot Halves are done
according to customer specification.
There are different possibilities how to design
the plate layout as shown on page 2.
Hot runner system
Connections
Mould plates
1. Screw fit manifold nozzle
2. Face fit manifold nozzle
3. Manifold and inlet bushing
4. Actuator
5. Wiring
6. Piping
7. Clamping plate
8. Spacer plate
9. Nozzle plate
1 / 4
C P
T A
c)
a)
d)
e)
b)1
2
For design and application information,
see the Synventive Hot Runner Guide.
2006-08-23 - All rights reserved. Errors and omissions excepted.
For a specific application, please consult Synventive.
Illustrations simplified, schematically drawn and not to scale.
Hot Halves
è
è
The hot runner system (and supply lines)
are mounted open in the plate or cut out
Only possible with screw fit manifold
nozzles
è
è
The hot runner system (incl. supply lines)
is covered by the nozzle plate or
completely enclosed by the mould plate
necessary for face fit nozzles
a) One plate layout
b) Two plate layout
c) Two plate layout
d) Three plate layout
e) Centre block for stack mould
Depending on application there are several
different options for the plate layout of Hot
Halves.
Shown on the right there some examples for
different plate layouts.
Plate layout
1. Open
2. Closed
2 / 4
C P
T A
1 2
3
4
For design and application information,
see the Synventive Hot Runner Guide.
2006-08-23 - All rights reserved. Errors and omissions excepted.
For a specific application, please consult Synventive.
Illustrations simplified, schematically drawn and not to scale.
Hot Halves
Application examples
1. Hot half, 4 ports, closed
2. Hot half, 64 ports, closed
3. Hot half, 4 ports, open
4. Hot half, 4 ports, centre block
for stack mould
è
è
3 plates
face fit manifold nozzles series CB ... M
è
è
3 plates
face fit manifold nozzles series 04 C02
è
è
2 plates
screw fit valve gate manifold nozzles
series 12 E01
è
è
3 plates
face fit manifold nozzles series CB ... M
3 / 4
C P
T A
1
2
For design and application information,
see the Synventive Hot Runner Guide.
2006-08-23 - All rights reserved. Errors and omissions excepted.
For a specific application, please consult Synventive.
Illustrations simplified, schematically drawn and not to scale.
Hot Halves
1. Hot half, 5 ports, open
2. Hot half, 3 ports, open
è
è
2 plates
screw fit valve gate manifold nozzles
series EB (16 E01)
è2 plates
screw fit valve gate manifold nozzles
series EC (22 E01)
Hydraulic oil filter and control block for
cascade moulding
Needle position control
è
è
è
Application examples
4 / 4
C P
T A
For design and application information,
see the Synventive Hot Runner Guide.
2006-08-23 - All rights reserved. Errors and omissions excepted.
For a specific application, please consult Synventive.
Illustrations simplified, schematically drawn and not to scale.
Hot Halves C P
T A
AU - Australia +61 3 9886 3475 [email protected]
BR - Brasil - Brazil +55 (0)11 6191 3433 [email protected]
CA - Canada +1 514-421-8963
+1 604-943-7702
CN - People's Republic of China +86 512 62838870
+86 755 82315175
CZ - Czech Rebpublic +420 326 992 038 [email protected]
DE - Germany +49 (0) 6251 9332-0 [email protected]
DK - Denmark +45 33931629 [email protected]
ES - Spain +34 93 565 15 00 [email protected]
FI - Finland +358(0)207 519 600 [email protected]
FR - France +33 (0) 474991600 [email protected]
GB - Great Britain +44 (0) 1527577417 [email protected]
IL - Israel +972-3-7325446 [email protected]
IN - India +91 80 2558 0024 [email protected]
IT - Italy +39 0266505373 [email protected]
JP - Japan + 81 45 472 1239 [email protected]
NL - The Netherlands +31 (0) 786738282 [email protected]
PL - Poland +48 (0) 52 323 12 00 [email protected]
PT - Portugal +351 244829790 [email protected]
SG - Singapore +65 65368093 [email protected]
SK - Slovak Republic +421 (0)2 63 82 92 48 [email protected]
US - United States of America +1 800.367.5662
+1 248.457.0761