how an urban abo tans a fox hide

7/29/2019 How an Urban Abo Tans a Fox Hide

1/12

How an Urban Abo Tans a Fox Hide

by Bill Scherer

Urban Abo sounds like an oxymoron. A lot of us who like to practice primitive skills live in cities, have college degrees, hold regular jobs and

careers. Maybe this is why primitive skills are so much fun for those of us who spend so much time inside factories and office buildings. In my o

case, I'm a Midwestern farmer's son who married a city girl, works in the high tech industry and lives in a townhouse with a 10 X10 foot "yard" a

a sundeck. I keep promising myself that someday we will be living in the country somewhere.

A lot of primitive skills can be practiced in back yards, sundecks, garages and living room couches, not necessarily in the woods or prairies. It tak

a bit of imagination, and occasional foraging trips. Sometime the foraging take place in the urban places instead of the woods. After all a stick lyin

on the sidewalk can do the same job as a similar stick lying on a forest path. A lava rock found in the street will make a pretty good abrading tool.

My family in the Midwest has a lot of trappers and hunters so it is easy for me to get hides and furs. When I was back east to visit, I picked up so

frozen furs and transported them frozen to my home and freezer in California. Fortunately, I have an understanding spouse who lets me keep froz

pelts in the freezer. Dried furs and rawhide are available from Moscow Hide and Fur. Fur bearing critters here in the bay area have really thin fur,

and trappers are pretty much non-existent. A cold environment produces a much nicer fur.

.So here is one of the frozen furs (in the plastic bag), and the tools. I mostly did one hide at a time

4/29/05 8:3ow An Urban Abo Tans a fox Hide

Page ttp://primitiveways.com/foxtan/Tanafox.htm


2/12

The raw pelt just thawed out.

Some of my tanning tools are rather nontraditional, for a very simple reason. It is what circumstances allow. I used to have two wooden scraping

beams, but my wife gave me the order to "get them damn logs out of my flowers". So I figured that a couple of chunks of PCV pipe mounted ove

garden rake will suffice, and I can disassemble and store them in the garage when not in use. If the critters skulls are not saved for me, pork brain

are available from the local Asian supermarket. I can't build a campfire in my yard to cook the brains, but I can use an old fondue pot. I'm not

allowed to dig a hole to smoke my pelts but an old flower pot and denim skirt will suffice. I used to haul all my stuff out to the country to tan, but

these days I have a wife and 5-year-old daughter to consider. If I am working just outside the door, I can keep an eye on the child, or come inside

the need arises. The point is that in an urban environment, I have to make some adaptations to my very limited workspace, and to other people.

The basic steps to tanning furs are cleaning, braining, softening, and smoking. Each of these steps has a lot of detail, and I will try to explain thembest I can. There is more than one way to skin a cat, or to tan a hide, and this is what works for me. I took these photos while tanning two pelts, s

some of the pics have both pelts, sometimes one.

The first step is to thaw the frozen pelt, and clean it up. Most fresh frozen hides have a bit of meat and fat on then. So I turned it inside out, and

started scraping with my blade. This is an old planner blade with a couple of chunks of old radiator hoses for a handle. What I'm trying to do is to

take off all the meat, fat, and membrane. The membrane is the most inside layer of the hide. It is very thin, a lot like a plastic wrap

If you don't get if off, the brain will not penetrate the skin, nor will the smoke. What I can't get with the blade, I will try to get off by abrading with

chunk of pumice stone or sandpaper. The torso of the fox goes easily, the head, legs and tail do not. Alcohol and paper towels work well for

cleaning grease off hides. I don't know what was used traditionally to degrease pelts. Next the hide is buffed with an abrasive stone or sandpaper.




3/12

The tail here is still a tube, so it must be cut open.

The cut is made from the inside of the tail on the underside all the way to the tip.




4/12

Degreasing the pelt with alcohol.

The ear cartilage I have approached two different ways. One pelt, I removed nearly all the cartilage entirely. The other pelt, I merely removed

separated the back of the ear, leaving the cartilage attached to the inside of the ear. I don't know what is traditionally done, but I will see how the ehold out in a few years. I use a couple of thin sticks and my fingers to separate the skin from the cartilage.


Page 4ttp://primitiveways.com/foxtan/Tanafox.htm


5/12

Working the ear.

Canine hides are very thin, unlike some other critters. This means the skin can be easily damaged, so I must be gentle and cautious. Even so, I

always get a few dings in the hide. Fortunately most breaks can be repaired, and from the outside, are not noticeable. The tail is a tiny strip of skin

with a lot of fur hanging on it, so it probably can't be repaired easily. My very first fox hide I ruined the tail about halfway down.




6/12

Fat and membrane.

Scraping




7/12

Buffing the pelt with an abrasive stone.

Next step is the braining. I use a blender to mash up the brain and cook it in my old 1970s fondue pot. I think that fondue was one of the great thi

to come out of the 70s. My wife bought me a new fondue pot last Christmas. I think she got tired of the flower power motif. After the brain slurry

well cooked it should cool off until it is only warm. Too hot will cook the pelt; too cold will not penetrate the skin as well. The brains are rubbed i

the skin, then the pelt is put into a plastic bag and in the shade. For the next two hours the pelt should be checked every half-hour. If it starts to sm

too nasty, it is time to take it out of the bag and start softening.

Hey, I've got a lot of brains.




8/12

Braining the pelt.

Brains smell a little funny under the best of circumstances, and spoil quickly. Once my neighbor looked over the fence while I was working a hid

and exclaimed, "What is that smell?" I make sure to clean up at the completion of the job. I wear old worn out clothing and a plastic apron. I don't

mind if they get smelly, they can be discarded if need be. That GI T-shirt is going to fall apart one of these days.

Softening is a matter of manipulating the skin as it dries. This can be done a number of ways, stretching it over a stake, a cable, or between the

hands. The hide changes color as it is stretched, turning paler as the fibers of the skin separate. Canine skins are very thin that must be stretched

gently. Too rough and the skin will rip. If the stretching stops before the hide is COMPLETELY dry, the skin will revert back to the consistency

cardboard. I use a combination of stake and hand stretching. I have a portable stake as opposed to the traditional stationary stake, and a handheld

deer bone chisel.




9/12

Softening the pelt over the stake. This is a lot of work.

Now for the smoking. The idea is to smoke the skin side of the pelt, not the fur. Smoking a softened pelt will do a few important things. It will

prevent the skin from turning hard after being wet. Smoking also discourages bugs. The color and smell it gives to the skin is a pleasant side effec

and also where the "tan" comes from. I use dry punky cottonwood; it gives a nice color. A friend of mine uses dried cow chips. I think my wife

would get pretty upset if I tried to keep cow chips lying around, so I won't press my luck. A piece of string goes from the eyeholes to an overhead

tree branch and keeps the hide in the right position. I have had a few folks on the sidewalk become concerned when they see smoke coming over

fence, but that is a good excuse to say good morning.




10/12

Sssmmmooookin!!!!!




11/12

Here is my "double barreled" hide tanner. The bottom of each hide is sewed to an old pair of jeans legs.

I use cotton denim skirts for larger hides. I get strange looks at garage sales when buying mini-skirts,

but what the hell, I am in California. The important thing is to avoid synthetic cloth, it can melt.

The ceramic pot has a coffee can inside and a couple of charcoal coals. To this I add handfuls of the punky wood. I keep the spritz bottle handy to

dampen the jeans to prevent flare-ups. Paper towels plug up the small holes like the mouth, eyes, and front leg holes. A few sticks inside the hide

will hold it open. I let it smoke until the color looks nice, usually about 2 hours. Smoking has to be watched without interruption, as a flare-up cou

ruin everything. I make sure to get all the personal comfort items taken care of before starting this job. If I have to leave it had better be an

emergency and the hide/skirt gets hoisted off from the smudge until I return. The smoking is completed by bagging the hide for a couple of days tlet the smoke set.

Now comes the really hard part, fashioning the pelts into usable clothing or blankets. Anyone out there ever make one of those hats that have the

animal face at your forehead and the fur draping down your back like a cape? Give me a shout.




12/12

The author's daughter holding the two tanned fox pelts.

My thanks to Steven Edholm, Tamara Wilder, and George Michard, who set my feet on the path.

E-mail your commits to "Bill Scherer" at [email protected]

The PrimitiveWays Book

The PrimitiveWays CD

PrimitiveWays Home Page

1998 - 2003PrimitiveWays



how an urban abo tans a fox hide

Documents