30

45

60

15

Optional

1 Everything needed to install your blind

Center SupportBracket Requirements

Widths to 48" 0 bracketsWidths 481⁄16" to 72" 1 bracketsWidths 721⁄16" to 96" 2 brackets Widths 961⁄16" to 120" 3 brackets

Tools Needed

1/16" or 3/32"

Inside- or Outside-mount 2" Wood Blinds

HOW TO InsTall

Mark location of blind (Outside Mount)2

Mark bracket location3

Or

Ceiling Mount

Back Mount

Or

Side Mount

Drill holes4

Position the center support(s) in line with the mounting brackets so they will not interfere with the ladder tapes. Space evenly and keep out of the way of other working parts.

3 Optional center support(s)/projection brackets

attach valance clip

Groove must either be centered or at top

Space clips evenly across width. Clips must not interfere with ladder tapes.

6

Or • O •

Ou

screw in brackets5

Mount blind in brackets7Headrail/Center Support Profile

8 Close door on brackets

SNAP!

Optional valance with returns and spliced valances8

Some returns are pre-assembled

Spliced valance

Valance returns

Optional hold-down brackets9

attach valance9

attach Tilt Wand

additional instructions

Wipe with a soft cloth or lightly vacuum with a soft brush attachment.

Or1 2 3

Remove tab only if visible below valance

110581 (04/11)