how to install, setup and configure microsoft exchange server 2007
TRANSCRIPT
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 1/12
SalesSupport
Lockstep Systems, Inc. (USA)
Automatic POP3 Email Downloader for Exchange Servers
Home Purchase Products Resellers Support About Us
IGetMail - How to Setup Exchange Server 2007
Follow the steps below to correctly configure your Exchange Server 2007 email server for general use, and for use withIGetMail. Note that for this document we are assuming you are installing Exchange 2007 on Windows Server 2008 64-Bit.
Pre-Installation Checklist
Install Windows Server 2008 64-bit version
Configure your static IP address
Activate Auto Updates
Add role - Active Directory Services
Add role - Active Directory Lightweight Services
Add feature - Windows Process Activation Service
Add role - Web Server (IIS)
Add feature - PowerShell
Roles / Features NOT to install
Installing Exchange Server 2007
Allow IGetMail access to your Exchange Server
Adding E-Mail Users
Pre-Installation Checklist
Make sure you have all of the following steps in place before you setup Exchange Server 2007 on Windows Server 2008 64-Bit.
For simplicity we are assuming you are setting up a small office where one machine will be used for both the ActiveDirectory and the Exchange Server. This setup works just fine and reduces the number of machines to maintain. If you havea larger office you may want to consider separating the Active Directory machine and the Exchange 2007 Server.
Install Windows Server 2008 64-bit version
Exchange 2007 is a 64-bit application and requires 64-bit versions of Windows Server 2003 or Windows Server 2008. You
should select a computer that is capable of running the 64-bit version of Windows Server 2003 or 2008. For this examplewe will start with a clean installation of Windows Server 2008 64-bit version that has not had any roles installed.
After installing Windows Server 2008, we set the clock and the name of the server to be "EX2007". At this point this server isconfigured to be a stand-alone computer with default settings.
IGETM A IL V ERSION 3.4
What's New in 3.4
Features & Benefits
Screen Shots
Easy Installation Steps
FAQs
POP3 / SMTP
Data Sheet (PDF)
User Guide - Online
Customer Testimonials
Download 15-day Trial
How to Upgrade
HOW TO USE WITH
AntiVirus & AntiSpam
Exchange Server 2013
Exchange Server 2010
Exchange Server 2007
Exchange Server 2003
Exchange Server 2000
Google Gmail
SYSTEM REQUIREM ENTS
Runs on an y Window s
Server tha t can run
Exchange Server
PRICING
$129 USD f or lic ense
to d ow nload email
f rom mult i ple POP3
s ervers to your local
Exchange S erver or
S MTP Server
NEED BACKUP SOFT WARE?
How to Backup Exchange
Backup for Workgroups Info
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 2/12
Configure Your Static IP Address
The default installation of Windows 2008 sets your IP v4 and IP v6 addresses to use DHCP. Since we will be configuring
this computer to be a domain controller, you must change the IP address of the computer to be a static IP address.
To change your IP address, click on "View Network Connections" in the Server Manager screen.
This will display the list of active network interfaces.
Double-click on your network adaptor to display the adaptors status.
Press the Properties button.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 3/12
Highlight "Internet Protocol Version 4 (TCP/IPv4)" and press the Properties button.
Change the radio button to "Use the following IP address" and enter an IP address you want to use for this server. In ourexample, we chose to assign this server the internal IP address "192.168.1.25". We also have a firewall appliance thatoperates as a gateway at the IP address "192.168.1.1".
NOTE: It is important to include this computer in the DNS list. You should list the IP address of this computer as the first
entry in the list of DNS servers. In the "Alternate DNS server" field, enter the IP address of a DNS server provided by yourISP.
Press OK to save your changes.
Now you will need to modify the support for IP v6. If your network uses IP v6, then you will need to select "Internet Protocol
Version 6 (TCP/IPv6)" and press the Properties button. Enter a static address. If you are not using IP v6, you can leave theIP v6 set to the default setting of DHCP.
NOTE: Exchange requires that IP V6 be enabled. Even if you do not use IP V6 you must leave it enabled. During thesetup of Active Directory, the Active Directory Setup Wizard will check that both IP v4 and IP v6 have static addresses
as long as the IP v4 address is static you can continue the installation. DO NOT DISABLE IP V6 or else the ExchangeHub Transport Service will not start.
At this point you should have all IP addresses on this server configured as static IP addresses. OR you have the IP v4
address configured as static and the IP v6 configured using DHCP. Press OK to save your changes and close the networkconnection screen.
Activate Auto Update
The next step in making this server a domain controller is to activate auto update. Active Directory will not install until this
computer has auto updates active. To activate auto updates click on the link "Configure Updates". Then select the optionto have Windows automatically install updates. At this time Windows will download updates and will most likely need toreboot your computer. Allow the updates to be applied and the computer to be restarted until all updates are applied beforeinstalling Active Directory. You do not want to be in the middle of installing Active Directory when an auto update needs toreboot your computer.
Add role - Active Directory Services
The process of installing Active Directory consists of two steps, the first step is to install Active Directory and then you willneed to configure your Active Directory. Once this is complete your Windows Server will now be a domain controller.
Step 1 - Install Active Directory
At the Computer Management Screen press the "Add Roles" link. At the Select Server Roles dialog check/tick the option
"Active Directory Domain Services" and press Next.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 4/12
Active Directory Domain Services will present information about the changes it will make to your server. Review thisinformation and press Next.
Now the installation will scan your configuration and inform you if there are any pre-requisites that you have not fulfilled. Ifthe Active Directory Installation presents an errors, correct these at this time and then repeat the installation. Once theSetup program indicates that you have met all pre-requisite, then press the Install button to start the installation process.
The setup program will now install Active Directory on your Server.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 5/12
When the installation is complete you should see a message indicate "Installation Succeeded", press Close to return tothe Server Management Screen.
Step 2 - Configure Active Directory
At the Server Management screen you should now see that you have 1 role installed. The Active Directory Domain Servicesmay indicate that it is installed but there are errors. This is because the software is installed but not configured.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 6/12
To configure Active Directory click on the line under Roles labeled "Active Directory Domain Services". The Server Managewill show you a page about the status of the Active Directory Role.
Click on the link "Run the Active Directory Services Installation Wizard (dcpromo.exe)" and the Active Directory DomainServices Installation Wizard will appear, press Next.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 7/12
The Installation Wizard will present information about the version of Active directory, press Next.
Since we are assuming this Exchange Server will be the first Domain Controller, we chose to create a new domain in a
new forest. Press Next.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 8/12
Enter the name of your domain. The domain name you enter here is the domain name that Exchange will associated withall of your email. If you use a hosting company to host your Internet Domain, then you may want to enter the name of yourInternet domain with ".local". If you host your own Internet Domain then you would enter your domain name here.
In our example we are assuming that IGetMail.com is hosted at an Internet Hosting Company. Since we do not hostIGetMail.com on this Exchange Server, we will use IGetMail.local to indicate our internal domain for IGetMail.
NOTE: Once you enter your domain name it is very hard to change it in the future, so you should take great care when enterthis name.
Press Next once you have decided on the name of your internal domain, that will be your Active Directory Domain and thedomain serviced by Exchange.
Next the Installation Wizard will ask you about compatibility. If you plan to have domain controllers running various versionsof Active Directory then you will want to chose a function level to include the lowest version of Windows that you are using fordomain controllers. Press Next.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 9/12
Next you will be asked a similar question which is at the domain level instead of the forest level on the previous screen. You should follow the same approach and include the function level to include the lowest version of Windows you plan touse for domain controllers. Press Next.
The first Domain Controller needs to have a DNS server running locally. The optimal location is to start out with having theinstallation wizard install the DNS server locally. Also it will automatically make this computer a global catalog server. Press Next.
You can specify where you want Active Directory to store its data. If you only have on e drive in your Server then use thedefaults. If you have multiple drives, you can select which drive to use. Press Next.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 10/12
Should you need to restore Active Directory in the event of a hard drive failure you will need to boot your Server into a specialmode called "Directory Restoration Mode". Should you need to boot your computer into this special mode, you will need touse a special password just for this restoration. You can define this password at this time. NOTE: This password isdifferent than the administrator account and if you change the administrator password this password will not change. Soyou will need to store this password forever in a safe place. Press Next.
Now the Installation Wizard will summarize the configuration that it is about to create. Press Next to start the process ofconfiguring your new Domain Controller.
The Installation Wizard will show its progress as it configures your Server. This will take a long time.
When the installation is complete, you will be shown a final screen. Press Finish.
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 11/12
Then restart your computer.
After restarting your computer Windows should show you the Server Manager. You should see on the Server Managerscreen that you have Active Directory and DNS Server roles installed. Also the process of installing Active Directory will addthe features "Group Policy Management" and "Remote Server Administration Tools".
You have 6 more tasks to complete and then you will have your Exchange Server 2007setup and configured.
Get your free link to the most detailed Exchange Server 2007 setup andconfiguration instructions available online!
All you need to do is fill out the form below and you will receive an email with a link to
this valuable, detailed information on how to:
Add role - Active Directory Lightweight Services
Add feature - Windows Process Activation Service
Add role - Web Server (IIS)
Add feature - Powershell
Roles & Features NOT to install
Installing Exchange Server 2007
First Name *
Last Name *
Company *
Email *
A Great Backup Product for IT Consultants, VARs and Software Installers
Copyright © 1999-2013. All rights reserved. Lockstep Systems, Inc. * P.O. Box 4662, Scottsdale, AZ 85261 * 1-480-596-9432
07/12/13 How to Install, Setup and Configure Microsoft Exchange Server 2007
www.igetmail.com/how-to-setup-exchange-2007/how-to-setup-exchange-2007.html 12/12
Copyright © 1999-2013. All rights reserved. Lockstep Systems, Inc. * P.O. Box 4662, Scottsdale, AZ 85261 * 1-480-596-9432