how to make paper flower basket
DESCRIPTION
Here I am pleased to introduce paper flower basket which can be used for visiting and putting things. It seems that the constitutions of the basket are so complicated, but the truth is not like this. Once I tell you the details about how to make a flower basket, you will have the same idea as me.TRANSCRIPT
How to make paper flower basket
Making paper flower basket is a good way to get entertainments for those who have nothing to do.
It’s too much better than spending a whole day watching TV or playing games. Well, let’s talk about
how to make a flower basket officially.
Materials needed in paper flower
basket:
Iron wires
Papers
How to make a flower basket?
Here I am pleased to introduce paper flower basket which can be used for visiting and putting things. It
seems that the constitutions of the basket are so complicated, but the truth is not like this. Once I tell you
the details about how to make a flower basket, you will have the same idea as me.
Step1: decorate the iron wires
with paper
Prepare 6 iron wires; wrap them with
papers one by one. (The colorful papers are
the best, here I choose newspapers)
Step2: make the bottom of basket
1. Put the 6 wire in order; make the
following steps one by one:
2. Then make the wire into the shapes of X, go on the work till you think it is ok, at last make the
wire upright.
Step 3: make the body of basket Step 4: make dents for basket
There are 4 step in paper flower basket in total, have you commanded this skill after my
introduction? If you have any question about how to make a paper flower basket, please visit our
website where you can get service at any moment.
Buy more papercraft tools and machine please click:
http://www.lovehobbycraft.com/b-403-papercraft-tools-machines.html
Knit along the wire upright. Stop the work
when you think the depth of the basket is
enough. And then make the wire upright to
be parallel to the ground. Go on knitting
along the parallel lines again. You will get a
design as the third picture follows:
Use the remains of the iron wire to make
dents for basket. The dents look like ears.
Inset the tail of every dents into somewhere
of the basket. If it is possible, you can add a
handle.