7/27/2019 How to Use Multiple Drawing Processes Simultaneously FAQ

http://slidepdf.com/reader/full/how-to-use-multiple-drawing-processes-simultaneously-faq 1/5

 

Chempute Software (Pty) LtdP.O.Box 856, Kloof, 3640, South Africa

Tel : Intl +27-31-7646840 Fax : Intl +27-31-7645934 Email :sales@chempute.com

How to Use Multiple Drawing Processes Simultaneously FAQ

Question:

Is it possible to run different Drawing Processes simultaneously?

 Answer :

The Drawing Process Suite can be used to set up a group of Drawing Processes that can be

run at the same time. These processes will follow the same rules that were set whilesetting up the processes, however the Drawing Process Suite will allow the User to savetime by running all the processes by the click of a button.

The “Drawing Process Suite” can be accessed on the “Output” ribbon as seen below.

7/27/2019 How to Use Multiple Drawing Processes Simultaneously FAQ

http://slidepdf.com/reader/full/how-to-use-multiple-drawing-processes-simultaneously-faq 2/5

 In this example we will be creating a Drawing Process Suite where all Single Part Detailsare to be generated on an A0 User Defined Prototype containing multiple parts on eachsheet. This Drawing Process Suite will also simultaneously generate Assemblies on an A0User Defined Prototype containing 1 Assembly Detail on each sheet. Keep in mind that therelevant Drawing Processes for these requirements should have already been created. Inthe Drawing Process Suite Manager, click on the “New Suite” option as seen below. 

 A name now needs to be assigned to this Drawing Process Suite that will allow all Users toidentify it and what will happen once this Drawing Process Suite is used. An example canbe seen below.

7/27/2019 How to Use Multiple Drawing Processes Simultaneously FAQ

http://slidepdf.com/reader/full/how-to-use-multiple-drawing-processes-simultaneously-faq 3/5

  A Drawing Process will now need to be added to the first step in this Drawing ProcessSuite. Click on the Pull Down menu and select the required Drawing Process as seen below.In this example our first step will be a Drawing Process that will create all our Single Partson a User Defined A0 Prototype with a BOM in the top right corner.

 A new Process Suite Step can then be created by clicking on the “New Process” button asseen below.

7/27/2019 How to Use Multiple Drawing Processes Simultaneously FAQ

http://slidepdf.com/reader/full/how-to-use-multiple-drawing-processes-simultaneously-faq 4/5

 The second step of the Drawing Process Suite can now be defined by selecting the correctDrawing Process. Click on the Pull Down menu and select the required Drawing Process asseen below. In this example our second step will be a Drawing Process that will create allour Assembly Drawings on a User Defined A2 Prototype with a BOM in the top right corner. 

This Drawing Process Suite is now ready can all changes can be saved by clicking the “Apply” button seen below.

7/27/2019 How to Use Multiple Drawing Processes Simultaneously FAQ

http://slidepdf.com/reader/full/how-to-use-multiple-drawing-processes-simultaneously-faq 5/5

  Additional Drawing Process Suites can be added to meet most drawing generatingrequirements. Once completed this Drawing Process Suite can be utilized by clicking on the

 “Use” button as seen below. This one run all the Drawing Processes added to the DrawingProcess Suite.

Chempute Software (Durban)Tel: 031-764 6840Fax: 031 764 5934

Chempute Software (Johannesburg)Tel: 011 803 6559Fax: 011 803 6569

www.chempute.com