how to use myscript notes - geniusdownload.geniusnet.com/2010/tablet/gnote7100.pdfhow to use...
TRANSCRIPT
How to use MyScript Notes
Step 1: Please run “Digital Organizer”. Connect G-Note 7100 to one USB port of your pc. Then, please find the .dnt file stored in the G-Note 7100. Here is what you write via G-Note 7100.
Step 2: Go to File, and choose “Save as”.
Step 3: Choose the file type as “MyScript Notes” and then save the .dnt file as “.notes” format.
Step 4: Install MyScript Notes from the driver cd of G-Note 7100. Then, run this application.
Step 5: Go to File/Open.
Step 6: Find the folder where you store the .notes file in step 3. And, open it.
Step 7: Here is the original hand-writing notes before transferring to text fonts.
Step 8: Please go to Conversation/Start.
Step 9: In this setting page, you can do some pre-setting before transferring your hand-writing notes to txt fonts. Then, press “ok”.
Step 10: MyScript Notes start to transfer your hand-writing notes to text format.
Step 11: Here is the result after transferring. You may need to do some correction if the software can’t recognize your hand-writing notes correctly.
Step 12: After correcting, you can export the result to Word Pad or e-mail program. If you want to export the result to Word Pad, please click on the “W” icon.
Step 13: Then you can save it as rtf file or do some other change as you want.