how to use this install guide...oct 29, 2019 · extend and connect the brown/red and brown/yellow...
TRANSCRIPT
![Page 1: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/1.jpg)
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
![Page 2: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/2.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2014Ford EconolinE
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 3: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/3.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford EconolinE 2008-2014
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 4: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/4.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford EconolinE 2008-2014
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 5: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/5.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford EconolinE 2008-2014
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER DASH, UNDER THE RADIO
![Page 6: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/6.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford EconolinE 2008-2014
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 7: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/7.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford EconolinE 2008-2014
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 8: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/8.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2007-2010Ford EdgE
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 9: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/9.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford EdgE 2007-2010
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 10: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/10.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford EdgE 2007-2010
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 11: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/11.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford EdgE 2007-2010
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 12: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/12.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford EdgE 2007-2010
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 13: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/13.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford EdgE 2007-2010
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 14: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/14.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2012Ford EscapE
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 15: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/15.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford EscapE 2008-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 16: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/16.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford EscapE 2008-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 17: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/17.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford EscapE 2008-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGEJUNCTION CONNECTOR, BEHIND THE RADIO TO THE RIGHT
![Page 18: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/18.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford EscapE 2008-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 19: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/19.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford EscapE 2008-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 20: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/20.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2007-2014Ford ExpEdition
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 21: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/21.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford ExpEdition 2007-2014
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 22: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/22.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford ExpEdition 2007-2014
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 23: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/23.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford ExpEdition 2007-2014
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 24: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/24.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford ExpEdition 2007-2014
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 25: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/25.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford ExpEdition 2007-2014
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 26: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/26.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2006-2010Ford ExplorEr
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 27: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/27.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford ExplorEr 2006-2010
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 28: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/28.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford ExplorEr 2006-2010
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 29: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/29.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford ExplorEr 2006-2010
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : WHITE/BROWNCENTER CONSOLE, HARNESS GOING TO THE BACK
![Page 30: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/30.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford ExplorEr 2006-2010
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 31: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/31.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford ExplorEr 2006-2010
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 32: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/32.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2006-2010Ford ExplorEr sport trac
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 33: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/33.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford ExplorEr sport trac 2006-2010
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 34: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/34.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford ExplorEr sport trac 2006-2010
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 35: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/35.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford ExplorEr sport trac 2006-2010
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : WHITE/BROWNCENTER CONSOLE, HARNESS GOING TO THE BACK
![Page 36: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/36.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford ExplorEr sport trac 2006-2010
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 37: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/37.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford ExplorEr sport trac 2006-2010
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 38: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/38.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2010Ford F-sEriEs supEr duty
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 39: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/39.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford F-sEriEs supEr duty 2008-2010
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 40: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/40.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford F-sEriEs supEr duty 2008-2010
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 41: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/41.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford F-sEriEs supEr duty 2008-2010
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGEPASSENGER SIDE, NEXT TO GLOVE BOX
![Page 42: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/42.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford F-sEriEs supEr duty 2008-2010
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 43: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/43.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford F-sEriEs supEr duty 2008-2010
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 44: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/44.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2011-2016Ford F-sEriEs supEr duty
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 45: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/45.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford F-sEriEs supEr duty 2011-2016
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 46: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/46.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford F-sEriEs supEr duty 2011-2016
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
3
![Page 47: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/47.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford F-sEriEs supEr duty 2011-2016
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
3
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
STEP 3
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
PINK/RED (NC)
AUDIOCABLE
![Page 48: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/48.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford F-sEriEs supEr duty 2011-2016
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 49: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/49.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford F-sEriEs supEr duty 2011-2016
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 50: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/50.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2009-2010Ford F150
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 51: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/51.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford F150 2009-2010
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 52: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/52.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford F150 2009-2010
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 53: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/53.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford F150 2009-2010
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER DASH, UNDER THE TRAY
![Page 54: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/54.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford F150 2009-2010
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 55: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/55.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford F150 2009-2010
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 56: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/56.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2011-2014Ford F150
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 57: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/57.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford F150 2011-2014
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 58: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/58.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford F150 2011-2014
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
3
![Page 59: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/59.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford F150 2011-2014
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
3
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
STEP 3
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
PINK/RED (NC)
AUDIOCABLE
![Page 60: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/60.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford F150 2011-2014
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 61: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/61.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford F150 2011-2014
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 62: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/62.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2006-2007Ford FivE hundrEd
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 63: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/63.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford FivE hundrEd 2006-2007
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 64: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/64.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford FivE hundrEd 2006-2007
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
3
![Page 65: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/65.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford FivE hundrEd 2006-2007
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
3
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
STEP 3
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
PINK/RED (NC)
AUDIOCABLE
![Page 66: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/66.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford FivE hundrEd 2006-2007
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 67: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/67.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford FivE hundrEd 2006-2007
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 68: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/68.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2009-2012Ford FlEx
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 69: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/69.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford FlEx 2009-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 70: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/70.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford FlEx 2009-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 71: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/71.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford FlEx 2009-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, JUNCTION CONNECTOR, IN FRONT OF THE SHIFTER
![Page 72: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/72.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford FlEx 2009-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 73: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/73.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford FlEx 2009-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 74: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/74.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2011Ford Focus
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 75: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/75.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford Focus 2008-2011
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 76: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/76.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford Focus 2008-2011
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 77: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/77.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford Focus 2008-2011
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, HORIZONTAL HARNESS ON THE HEATER BOX
![Page 78: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/78.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford Focus 2008-2011
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 79: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/79.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford Focus 2008-2011
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 80: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/80.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2006-2012Ford Fusion
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 81: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/81.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford Fusion 2006-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 82: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/82.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford Fusion 2006-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 83: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/83.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford Fusion 2006-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, IN FRONT OF THE ARM REST
![Page 84: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/84.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford Fusion 2006-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 85: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/85.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford Fusion 2006-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 86: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/86.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2007-2012Ford Mustang
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 87: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/87.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford Mustang 2007-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 88: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/88.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford Mustang 2007-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 89: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/89.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford Mustang 2007-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGE OR BLUESYNC UNIT, BEHIND THE GLOVE BOX
![Page 90: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/90.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford Mustang 2007-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 91: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/91.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford Mustang 2007-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 92: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/92.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2013-2014Ford Mustang
BasE
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 93: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/93.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford Mustang BasE 2013-2014
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 94: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/94.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford Mustang BasE 2013-2014
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 95: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/95.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford Mustang BasE 2013-2014
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGE OR BLUESYNC UNIT, BEHIND THE GLOVE BOX
![Page 96: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/96.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford Mustang BasE 2013-2014
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 97: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/97.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford Mustang BasE 2013-2014
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 98: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/98.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2013-2014Ford Mustang
shakEr
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 99: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/99.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford Mustang shakEr 2013-2014
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 100: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/100.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford Mustang shakEr 2013-2014
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
2
![Page 101: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/101.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford Mustang shakEr 2013-2014
AUX INAUX IN
2
SUB INCENTER IN
SUB INCENTER IN
AUDIOCABLE
OBDII CONNECTORSTEP 4
MAESTRO RR MODULE
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
CONNECT TOAFTERMARKET RADIO
RCA CABLES
RCA CABLES
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
FO1 T-HARNESS
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 5
STEP 6
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
WIRES FROMVEHICLE
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
SWI 2 : BLUE/ORANGE OR BLUESYNC UNIT, BEHIND THE GLOVE BOX
![Page 102: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/102.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford Mustang shakEr 2013-2014
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 103: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/103.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford Mustang shakEr 2013-2014
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 104: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/104.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2013-2014Ford Mustang
shakEr pro
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 105: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/105.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford Mustang shakEr pro 2013-2014
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 106: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/106.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford Mustang shakEr pro 2013-2014
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
2
![Page 107: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/107.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford Mustang shakEr pro 2013-2014
AUX INAUX IN
2
SUB INCENTER IN
SUB INCENTER IN
AUDIOCABLE
OBDII CONNECTORSTEP 4
MAESTRO RR MODULE
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
CONNECT TOAFTERMARKET RADIO
RCA CABLES
RCA CABLES
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
FO1 T-HARNESS
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 5
STEP 6
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
WIRES FROMVEHICLE
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
SWI 2 : BLUE/ORANGE OR BLUESYNC UNIT, BEHIND THE GLOVE BOX
![Page 108: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/108.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford Mustang shakEr pro 2013-2014
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 109: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/109.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford Mustang shakEr pro 2013-2014
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 110: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/110.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2009Ford taurus
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 111: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/111.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford taurus 2008-2009
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 112: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/112.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford taurus 2008-2009
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 113: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/113.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford taurus 2008-2009
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : GRAY/BLUECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 114: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/114.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford taurus 2008-2009
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 115: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/115.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford taurus 2008-2009
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 116: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/116.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2010-2012Ford taurus
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 117: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/117.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford taurus 2010-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 118: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/118.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford taurus 2010-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 119: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/119.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford taurus 2010-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 120: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/120.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford taurus 2010-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 121: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/121.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford taurus 2010-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 122: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/122.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2012Ford taurus x
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 123: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/123.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Ford taurus x 2008-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 124: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/124.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Ford taurus x 2008-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 125: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/125.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Ford taurus x 2008-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 126: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/126.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Ford taurus x 2008-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 127: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/127.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Ford taurus x 2008-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 128: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/128.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2009-2012lincoln Mks
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 129: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/129.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
lincoln Mks 2009-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 130: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/130.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
lincoln Mks 2009-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 131: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/131.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
lincoln Mks 2009-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 132: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/132.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
lincoln Mks 2009-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 133: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/133.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
lincoln Mks 2009-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 134: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/134.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2010-2012lincoln Mkt
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 135: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/135.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
lincoln Mkt 2010-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 136: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/136.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
lincoln Mkt 2010-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 137: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/137.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
lincoln Mkt 2010-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 138: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/138.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
lincoln Mkt 2010-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 139: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/139.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
lincoln Mkt 2010-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 140: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/140.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2007-2010lincoln Mkx
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 141: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/141.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
lincoln Mkx 2007-2010
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 142: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/142.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
lincoln Mkx 2007-2010
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 143: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/143.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
lincoln Mkx 2007-2010
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 144: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/144.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
lincoln Mkx 2007-2010
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 145: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/145.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
lincoln Mkx 2007-2010
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 146: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/146.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2007-2012lincoln MkZ
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 147: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/147.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
lincoln MkZ 2007-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 148: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/148.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
lincoln MkZ 2007-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 149: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/149.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
lincoln MkZ 2007-2012
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 150: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/150.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
lincoln MkZ 2007-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 151: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/151.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
lincoln MkZ 2007-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 152: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/152.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2007-2014lincoln navigator
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 153: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/153.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
lincoln navigator 2007-2014
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 154: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/154.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
lincoln navigator 2007-2014
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 155: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/155.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
lincoln navigator 2007-2014
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGESYNC UNIT, CENTER CONSOLE
![Page 156: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/156.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
lincoln navigator 2007-2014
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 157: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/157.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
lincoln navigator 2007-2014
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 158: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/158.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2006lincoln ZEphyr
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 159: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/159.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
lincoln ZEphyr 2006
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 160: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/160.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
lincoln ZEphyr 2006
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
3
![Page 161: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/161.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
lincoln ZEphyr 2006
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
3
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
STEP 3
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
PINK/RED (NC)
AUDIOCABLE
![Page 162: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/162.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
lincoln ZEphyr 2006
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 163: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/163.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
lincoln ZEphyr 2006
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 164: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/164.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2011MaZda triButE
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 165: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/165.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
MaZda triButE 2008-2011
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 166: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/166.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
MaZda triButE 2008-2011
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
3
![Page 167: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/167.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
MaZda triButE 2008-2011
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
3
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
STEP 3
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
PINK/RED (NC)
AUDIOCABLE
![Page 168: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/168.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
MaZda triButE 2008-2011
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 169: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/169.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
MaZda triButE 2008-2011
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 170: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/170.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2011MErcury MarinEr
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 171: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/171.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
MErcury MarinEr 2008-2011
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 172: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/172.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
MErcury MarinEr 2008-2011
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 173: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/173.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
MErcury MarinEr 2008-2011
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGEJUNCTION CONNECTOR, BEHIND THE RADIO TO THE RIGHT
![Page 174: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/174.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
MErcury MarinEr 2008-2011
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 175: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/175.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
MErcury MarinEr 2008-2011
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 176: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/176.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2006-2011MErcury Milan
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 177: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/177.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
MErcury Milan 2006-2011
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 178: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/178.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
MErcury Milan 2006-2011
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 179: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/179.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
MErcury Milan 2006-2011
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : BLUE/ORANGECENTER CONSOLE, RIGHT SIDE, IN FRONT OF ARM REST
![Page 180: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/180.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
MErcury Milan 2006-2011
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 181: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/181.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
MErcury Milan 2006-2011
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 182: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/182.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2005-2007MErcury MontEgo
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 183: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/183.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
MErcury MontEgo 2005-2007
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 184: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/184.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
MErcury MontEgo 2005-2007
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
• Remove the factory radio.
STEP 2• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 5• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
3
![Page 185: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/185.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
MErcury MontEgo 2005-2007
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
3
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 4
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
OBDII CONNECTOR
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESSSTEP 2
STEP 5
WIRES FROMVEHICLE
STEP 3
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
PINK/RED (NC)
AUDIOCABLE
![Page 186: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/186.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
MErcury MontEgo 2005-2007
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 187: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/187.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
MErcury MontEgo 2005-2007
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 188: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/188.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2006-2010MErcury MountainEEr
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 189: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/189.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
MErcury MountainEEr 2006-2010
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 190: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/190.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
MErcury MountainEEr 2006-2010
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 191: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/191.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
MErcury MountainEEr 2006-2010
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : WHITE/BROWNCENTER CONSOLE, HARNESS GOING TO THE BACK
![Page 192: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/192.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
MErcury MountainEEr 2006-2010
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 193: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/193.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
MErcury MountainEEr 2006-2010
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
![Page 194: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/194.jpg)
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2009MErcury saBlE
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, SYNC VOICE COMMANDS, SYNC BLUETOOTH AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro FO1 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-FOR01-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
![Page 195: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/195.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
MErcury saBlE 2008-2009
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Troubleshooting Table 6
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
![Page 196: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/196.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
MErcury saBlE 2008-2009
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips. Connect every wire to the aftermarket radio main harness and match the wire colors.
• Connect every wire from the aftermarket radio main harness to the FO1 T-harness and match the wire colors. (Refer to Diagram)
STEP 2Vehicles equipped with navigation radios skip to Step 3.
(Required for vehicles equipped with SYNC, without factory navigation system; refer to Vehicle Wire Chart)
• Disassemble the dashboard carefully and remove the factory radio from its housing without disconnecting it.
• See the WIRE CHART for vehicle wire color and location.
• Use a multimeter to test the SWI 2 wire. Connect the BLACK test probe to ground (-) and connect the RED test probe to the wire SWI 2 wire. Have the ignition and the radio ON. If the SWI 2 wire is connected, the multimeter will display approximately 5 volts. This value will drop upon pressing the steering wheel voice, phone or OK button.
• Cut the SWI 2 INPUT wire.
• Connect the PINK/RED wire of FO1 T-harness to the SWI 2 INPUT wire going to the steering wheel. Insulate the wire side going to the SYNC module and plug the SYNC harness into the SYNC module.
STEP 3• Connect the factory harness to the FO1 T-harness. Connect
only the available connectors. For example, if the factory harness has two connectors, connect only these two connectors.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (if there is no iDatalink audio input, connect to AUX).
Note: On Pioneer radio, ensure that there is nothing plugged into the W/R port.
• Insert the RCA connectors into the aftermarket radio.
NOTES:
The RCA connectors labeled SUB IN can be used to feed the subwoofer channel of the factory amplifier.
The RCA connector labeled CENTER IN can be used to feed the center channel of the THX system or as a second subwoofer channel (if applicable).
The RCA connectors labeled AUX IN can be used to connect the factory 3.5 mm audio jack, in vehicles that are NOT equipped with SYNC, to the auxiliary input of the aftermarket radio.
STEP 6• Secure the aftermarket radio in the dashboardhousing.
• Connect all the harnesses to the Maestro RR module then test your installation.
1
![Page 197: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/197.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
MErcury saBlE 2008-2009
AUX INAUX IN
SUB INCENTER IN
SUB INCENTER IN
1
OBDII CONNECTORSTEP 4
CONNECT AUX IN ONLY IF YOU DON’T HAVE SYNC
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)YELLOW/BLACK - FOOT BRAKE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEEDLTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
RCA CABLES
WIRING DIAGRAMSTEP 1 STEP 5
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
MAESTRO RR MODULE
DATACABLE
FACTORY RADIO HARNESS
SYNC HARNESS
PINK/RED - SWI 2 (-) INPUT INSULATEWIRE
SYNCMODULE SIDE
STEERINGWHEEL SIDE
STEP 2
STEP 3
STEP 6
WIRES FROMVEHICLE
FO1 T-HARNESS
STEERING WHEELCONTROL CABLE
NOT REQUIRED
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
CONNECTION REQUIRED ONLY IF EQUIPPED WITH SYNC
AUDIOCABLE
SWI 2 : GRAY/BLUECENTER CONSOLE, RIGHT SIDE, HARNESS GOING TO THE BACK
![Page 198: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/198.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
MErcury saBlE 2008-2009
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
![Page 199: HOW TO USE THIS INSTALL GUIDE...Oct 29, 2019 · Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to: BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW](https://reader036.vdocuments.net/reader036/viewer/2022071113/5fe9fe8b48e6627d266e48ed/html5/thumbnails/199.jpg)
ADS-RR(SR)-FOR01-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
MErcury saBlE 2008-2009
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBDII connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/ BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
Reset the RR.
There is no sound from Sync (if equipped). Ensure the all black, 3-pin to 3.5mm audio cable is connected between the RR and the radio. Make sure it is in the correct radio input.
The radio will not turn on, and there was no 16-pin plug connected to the OEM radio.
The data lines are not present behind the radio and must be connected at the OBDII. Extend and connect the BROWN/RED and BROWN/YELLOW wires from the FO1’s 16-pin plug to:BROWN/RED to pin 3 (GRAY/ORANGE) and BROWN/YELLOW to pin 11 (VIOLET/ORANGE) at the OBDII.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.