how to use this install guideimages.idatalink.com/corporate/content/manuals/rr...jun 05, 2018 ·...
TRANSCRIPT
![Page 1: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/1.jpg)
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
![Page 2: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/2.jpg)
INSTALL GUIDEChrySLEr 200
2011-2014retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 3: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/3.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 200 2011-2014
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 4: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/4.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 200 2011-2014
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 5: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/5.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 200 2011-2014
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 6: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/6.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 200 2011-2014
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 7: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/7.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 200 2011-2014
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 8: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/8.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 200 2011-2014
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 9: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/9.jpg)
INSTALL GUIDEChrySLEr 300
2008-2010retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 10: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/10.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 300 2008-2010
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 11: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/11.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 300 2008-2010
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 12: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/12.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 300 2008-2010
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 13: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/13.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 300 2008-2010
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 14: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/14.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 300 2008-2010
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 15: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/15.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler 300 2008-2010
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 16: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/16.jpg)
INSTALL GUIDEChrySLEr ASPEN
2008-2009retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 17: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/17.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler aspen 2008-2009
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 18: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/18.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler aspen 2008-2009
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 19: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/19.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler aspen 2008-2009
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 20: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/20.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler aspen 2008-2009
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 21: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/21.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler aspen 2008-2009
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/Pink (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/Red (DATA) OBDII connector, under driver side dash
![Page 22: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/22.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler aspen 2008-2009
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 23: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/23.jpg)
INSTALL GUIDEChrySLEr SEbrING
2007-2010retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 24: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/24.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler seBring 2007-2010
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 25: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/25.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler seBring 2007-2010
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 26: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/26.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler seBring 2007-2010
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 27: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/27.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler seBring 2007-2010
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 28: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/28.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler seBring 2007-2010
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 29: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/29.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler seBring 2007-2010
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 30: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/30.jpg)
INSTALL GUIDEChrySLEr TOWN AND COUNTry
2008-2011retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 31: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/31.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2008-2011
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 32: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/32.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2008-2011
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 33: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/33.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2008-2011
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 34: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/34.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2008-2011
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 35: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/35.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2008-2011
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 36: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/36.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2008-2011
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 37: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/37.jpg)
INSTALL GUIDEChrySLEr TOWN AND COUNTry
2012-2016retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 38: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/38.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2012-2016
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 39: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/39.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2012-2016
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 40: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/40.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2012-2016
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 41: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/41.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2012-2016
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 42: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/42.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2012-2016
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 43: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/43.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
chrysler town and coUntry 2012-2016
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 44: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/44.jpg)
INSTALL GUIDEDODGE AvENGEr
2008-2014retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 45: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/45.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge avenger 2008-2014
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 46: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/46.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge avenger 2008-2014
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 47: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/47.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge avenger 2008-2014
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 48: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/48.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge avenger 2008-2014
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 49: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/49.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge avenger 2008-2014
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 50: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/50.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge avenger 2008-2014
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 51: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/51.jpg)
INSTALL GUIDEDODGE CALIbEr
2009-2012retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 52: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/52.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge caliBer 2009-2012
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 53: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/53.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge caliBer 2009-2012
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 54: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/54.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge caliBer 2009-2012
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 55: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/55.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge caliBer 2009-2012
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 56: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/56.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge caliBer 2009-2012
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/Tan (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 57: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/57.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge caliBer 2009-2012
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 58: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/58.jpg)
INSTALL GUIDEDODGE ChALLENGEr
2008-2014retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 59: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/59.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge challenger 2008-2014
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 60: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/60.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge challenger 2008-2014
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 61: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/61.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge challenger 2008-2014
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 62: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/62.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge challenger 2008-2014
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 63: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/63.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge challenger 2008-2014
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 64: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/64.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge challenger 2008-2014
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 65: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/65.jpg)
INSTALL GUIDEDODGE ChArGEr
2008-2010retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 66: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/66.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge charger 2008-2010
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 67: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/67.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge charger 2008-2010
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 68: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/68.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge charger 2008-2010
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 69: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/69.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge charger 2008-2010
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 70: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/70.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge charger 2008-2010
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 71: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/71.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge charger 2008-2010
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 72: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/72.jpg)
INSTALL GUIDEDODGE DAkOTA
2008-2010retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 73: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/73.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2008-2010
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 74: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/74.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2008-2010
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 75: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/75.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2008-2010
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 76: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/76.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2008-2010
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 77: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/77.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2008-2010
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 Pink/Red (DATA) OBDII connector, under driver side dash
![Page 78: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/78.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2008-2010
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 79: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/79.jpg)
INSTALL GUIDEDODGE DAkOTA
2011retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 80: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/80.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2011
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 81: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/81.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2011
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 82: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/82.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2011
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 83: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/83.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2011
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 84: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/84.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2011
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 85: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/85.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dakota 2011
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 86: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/86.jpg)
INSTALL GUIDEDODGE DUrANGO
2008-2009retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 87: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/87.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2008-2009
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 88: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/88.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2008-2009
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 89: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/89.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2008-2009
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 90: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/90.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2008-2009
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 91: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/91.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2008-2009
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/DkGreen (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 92: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/92.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2008-2009
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 93: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/93.jpg)
INSTALL GUIDEDODGE DUrANGO
2011-2013retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 94: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/94.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2011-2013
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 95: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/95.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2011-2013
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 96: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/96.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2011-2013
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 97: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/97.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2011-2013
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 98: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/98.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2011-2013
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/DkGreen (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 99: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/99.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge dUrango 2011-2013
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 100: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/100.jpg)
INSTALL GUIDEDODGE GrAND CArAvAN
2008-2011retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 101: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/101.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2008-2011
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 102: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/102.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2008-2011
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 103: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/103.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2008-2011
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 104: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/104.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2008-2011
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 105: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/105.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2008-2011
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 106: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/106.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2008-2011
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 107: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/107.jpg)
INSTALL GUIDEDODGE GrAND CArAvAN
2012-2017retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 108: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/108.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2012-2017
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 109: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/109.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2012-2017
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 110: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/110.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2012-2017
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 111: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/111.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2012-2017
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 112: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/112.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2012-2017
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 113: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/113.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge grand caravan 2012-2017
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 114: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/114.jpg)
INSTALL GUIDEDODGE JOUrNEy
2009-2010retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 115: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/115.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge JoUrney 2009-2010
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 116: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/116.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge JoUrney 2009-2010
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 117: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/117.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge JoUrney 2009-2010
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 118: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/118.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge JoUrney 2009-2010
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 119: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/119.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge JoUrney 2009-2010
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/DkGreen (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 120: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/120.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge JoUrney 2009-2010
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 121: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/121.jpg)
INSTALL GUIDEDODGE NITrO
2007-2011retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 122: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/122.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge nitro 2007-2011
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 123: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/123.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge nitro 2007-2011
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 124: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/124.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge nitro 2007-2011
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 125: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/125.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge nitro 2007-2011
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 126: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/126.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge nitro 2007-2011
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 127: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/127.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge nitro 2007-2011
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 128: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/128.jpg)
INSTALL GUIDEDODGE rAM Cv
2010-2015retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 129: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/129.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge ram cv 2010-2015
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 130: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/130.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge ram cv 2010-2015
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 131: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/131.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge ram cv 2010-2015
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 132: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/132.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge ram cv 2010-2015
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 133: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/133.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge ram cv 2010-2015
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 134: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/134.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
dodge ram cv 2010-2015
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 135: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/135.jpg)
INSTALL GUIDEJEEP COMMANDEr
2008-2010retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 136: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/136.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep commander 2008-2010
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 137: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/137.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep commander 2008-2010
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 138: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/138.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep commander 2008-2010
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 139: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/139.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep commander 2008-2010
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 140: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/140.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep commander 2008-2010
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 141: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/141.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep commander 2008-2010
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 142: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/142.jpg)
INSTALL GUIDEJEEP COMPASS
2009-2016retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 143: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/143.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep compass 2009-2016
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 144: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/144.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep compass 2009-2016
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 145: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/145.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep compass 2009-2016
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 146: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/146.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep compass 2009-2016
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 147: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/147.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep compass 2009-2016
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/Tan (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 148: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/148.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep compass 2009-2016
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 149: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/149.jpg)
INSTALL GUIDEJEEP GrAND ChErOkEE
2008-2010retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 150: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/150.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2008-2010
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 151: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/151.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2008-2010
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 152: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/152.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2008-2010
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 153: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/153.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2008-2010
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 154: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/154.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2008-2010
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/DkGreen (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 155: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/155.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2008-2010
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 156: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/156.jpg)
INSTALL GUIDEJEEP GrAND ChErOkEE
2011-2013retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 157: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/157.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2011-2013
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 158: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/158.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2011-2013
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 159: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/159.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2011-2013
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 160: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/160.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2011-2013
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 161: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/161.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2011-2013
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/DkGreen (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 162: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/162.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep grand cherokee 2011-2013
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 163: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/163.jpg)
INSTALL GUIDEJEEP LIbErTy
2008-2012retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 164: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/164.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep liBerty 2008-2012
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 165: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/165.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep liBerty 2008-2012
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 166: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/166.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep liBerty 2008-2012
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 167: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/167.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep liBerty 2008-2012
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 168: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/168.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep liBerty 2008-2012
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 169: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/169.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep liBerty 2008-2012
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 170: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/170.jpg)
INSTALL GUIDEJEEP PATrIOT
2009-2016retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 171: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/171.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep patriot 2009-2016
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 172: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/172.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep patriot 2009-2016
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 173: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/173.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep patriot 2009-2016
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 174: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/174.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep patriot 2009-2016
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 175: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/175.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep patriot 2009-2016
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/Tan (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 176: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/176.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep patriot 2009-2016
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 177: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/177.jpg)
INSTALL GUIDEJEEP WrANGLEr Jk AT
2007-2018retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 178: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/178.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk at 2007-2018
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 179: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/179.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk at 2007-2018
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 180: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/180.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk at 2007-2018
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 181: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/181.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk at 2007-2018
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 182: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/182.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk at 2007-2018
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 183: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/183.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk at 2007-2018
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 184: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/184.jpg)
INSTALL GUIDEJEEP WrANGLEr Jk MT
2007-2018retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 185: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/185.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk mt 2007-2018
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 186: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/186.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk mt 2007-2018
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• To connect reverse camera, connect PURPLE/WHITE
Reverse Light (+) wire from aftermarket radio to White/Gray wire in harness in passenger kick panel.
STEP 8• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
3
![Page 187: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/187.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk mt 2007-2018
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS • Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 188: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/188.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk mt 2007-2018
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 8
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)
LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTORWIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
PURPLE/WHITE (NC)
STEP 7PURPLE/WHITEREVERSE LIGHT (+) WHITE/GRAY
PASSENGER KICK PANEL
![Page 189: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/189.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk mt 2007-2018
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
Reverse light ~ ~ ~ ~ White/Gray (+) Harness in passenger kick panel
![Page 190: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/190.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
Jeep wrangler Jk mt 2007-2018
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 191: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/191.jpg)
INSTALL GUIDEMITSUbIShI rAIDEr
2008-2009retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 192: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/192.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
mitsUBishi raider 2008-2009
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 193: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/193.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
mitsUBishi raider 2008-2009
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female RED connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
2
![Page 194: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/194.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
mitsUBishi raider 2008-2009
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
2
![Page 195: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/195.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
mitsUBishi raider 2008-2009
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACK
BLACK (NC)
RED
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 196: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/196.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
mitsUBishi raider 2008-2009
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 Pink/Red (DATA) OBDII connector, under driver side dash
![Page 197: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/197.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
mitsUBishi raider 2008-2009
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 198: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/198.jpg)
INSTALL GUIDErAM PICkUP 2009-2012
retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 199: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/199.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
ram pickUp 2009-2012
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 200: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/200.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
ram pickUp 2009-2012
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS Note: VES cannot be retained in this vehicle.
STEP 1• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 201: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/201.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
ram pickUp 2009-2012
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 202: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/202.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
ram pickUp 2009-2012
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 203: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/203.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
ram pickUp 2009-2012
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/DkGreen (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 204: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/204.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
ram pickUp 2009-2012
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 205: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/205.jpg)
INSTALL GUIDEvOLkSWAGEN rOUTAN
2008-2011retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 206: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/206.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2008-2011
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 207: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/207.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2008-2011
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 208: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/208.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2008-2011
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 209: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/209.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2008-2011
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 210: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/210.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2008-2011
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White/DkBlue (DATA) OBDII connector, under driver side dash
![Page 211: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/211.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2008-2011
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
![Page 212: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/212.jpg)
INSTALL GUIDEvOLkSWAGEN rOUTAN
2012-2014retains steering wheel controls, Uconnect, Uconnect BlUetooth, and more!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PrOGrAMMED FIrMWArEADS-RR(SR)-CHR01-DS
PrODUCTS rEQUIrEDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro CH1 Installation Harness
OPTIONAL ACCESSORIES Click here for: Radar Integration Installation GuideRadar Integration Owner’s Guide for Kenwood and JVC Radios
E L E C T R O N I C S
![Page 213: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/213.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2012-2014
Automotive Data Solutions Inc. © 2018 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 5
Vehicle Wire Reference Chart 6
Radio Wire Reference Chart 7
![Page 214: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/214.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2012-2014
Automotive Data Solutions Inc. © 2018 3
INSTALLATION INSTrUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the CH1 T-harness and match the wire functions.
STEP 2
• Remove the factory radio.
• Access the main 22 pin factory radio connector (2.1) and determine if you have a factory amplifi er.
If you don’t have wires in PIN 19, 20, 21 and 22, you have a factory amplifi er:
• Plug the female GREEN connector to the male GREEN connector of your CH1 T-harness.
• Plug the female WHITE connector to the male WHITE connector of your CH1 T-harness.
If you have wires in PIN 19, 20, 21 and 22, you don’t have a factory amplifi er:
• Plug the female GREEN connector to the male WHITE connector of your CH1 T-harness.
• Plug the female WHITE connector to the male GREEN connector of your CH1 T-harness.
STEP 3• Plug the female BLACK connector to the male BLACK
connector.
STEP 4• Connect the factory harness to the CH1 T-harness.
STEP 5• Access the OBDII connector located under the driver side
dashboard.
• Connect the RED/BROWN wire of the CH1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
• Connect the YELLOW/BROWN wire of the CH1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)
STEP 6• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 7• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
MODULE SETUP:• Insert the key into the ignition and turn it to the ACC
position.
• The Radio will turn on and the setup screen will appear. Choose one of the two Bluetooth OPTIONS below:
OPTION 1:
This option lets the factory Bluetooth system handle calls and the Factory and the aftermarket Bluetooth system stream Audio.
• To use the factory Bluetooth system: (The factory Bluetooth system is OFF by default)
• Scroll down to Chrysler setup and press SET
• Go to the OEM Bluetooth and press ON
• Press the BACK button (circular shaped arrow)
• Scroll down then press FINISH
87651 109
19181716
432
151413 21
11 12
2220
Fig. 2.1
1
![Page 215: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/215.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2012-2014
Automotive Data Solutions Inc. © 2018 4
INSTALLATION INSTrUCTIONS OPTION 2:
This option lets the aftermarket Bluetooth system handle calls and stream Audio. To use the aftermarket Bluetooth system:
• Scroll to the bottom of the setup screen and press FINISH
• Install the aftermarket microphone
WARNING: Aftermarket Bluetooth system If your phone is paired to the Factory Bluetooth system you must delete the pairing from the phone to the Factory Bluetooth system.
For more information and programming procedures, see the aftermarket Bluetooth system and the factory Bluetooth system owner’s manuals.
The module is now programmed and ready to be used. To access the new menus, press on CHRYSLER FEATURES.
Insert the aftermarket radio in the dashboard housing and test all the functionalities. Reassemble the dashboard carefully.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
OEM bLUETOOTh SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle.
2013 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on
and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.
2014 Kenwood Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.
2014 Alpine Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.
2014 Pioneer Radios:
For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select SETUP, then SYSTEM SETUP, then IDATALINK SETUP and turn OEM Bluetooth to OFF.
Note: Bluetooth audio streaming is not supported by 2014 Pioneer radios.
1
![Page 216: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/216.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2012-2014
Automotive Data Solutions Inc. © 2018 5
C
A
H
FG
D
C
A
G
F
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
D
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BROWN (NOT CONNECTED)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITHOUT AMP
CONNECTIONS WITH AMP
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAINHARNESS
DATACABLE
AUDIOCABLE
PURPLE - RR SPEAKER (+)
CONNECT TOAFTERMARKET RADIO
CH1 T-HARNESS
FACTORY RADIOHARNESS
OBDII CONNECTOR
WIRES FROMVEHICLE
PINK - VEHICLE SPEED (CONNECT IF THERE IS A MATCH)
GREEN GREEN
WHITEWHITE
BLACKBLACK
RED (NC)
NOTE: PIN SIDE VIEW.CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
RED/BROWN - CAN2HYELLOW/BROWN - CAN2L
![Page 217: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/217.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2012-2014
Automotive Data Solutions Inc. © 2018 6
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CAN2H OBDII ~ 16 pin 06 White/LtBlue (DATA) OBDII connector, under driver side dash
CAN2L OBDII ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
![Page 218: HOW TO USE THIS INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RR...Jun 05, 2018 · STEP 7 • Connect all the harnesses to the Maestro RR module then proceed to module](https://reader036.vdocuments.net/reader036/viewer/2022070902/5f5b59d406cd9745514e23fe/html5/thumbnails/218.jpg)
ADS-RR(SR)-CHR01-DS maestro.idatalink.com
volkswagen roUtan 2012-2014
Automotive Data Solutions Inc. © 2018 7
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink