1(d) HRWRATo improve the workability of concrete, a high-range water-reducing admixture [hyper-plasticizer] was used during mixing operations.The high-range water-reducing admixture (HRWRA) was a polycarboxylate-based admixture with a specific gravity of 1.The strength-gain characteristics of the concrete were greatly influenced by the type and dosage rate of retarding admixture, as well as by the compatibility between the retarding admixture and the high-range water-reducing admixture. MasterGlenium 3030ready-to-use full-range water-reducing admixture is a patented new generation of admixture based on polycarboxylate chemistry. ...

MasterGlenium 3400 (Formerly Glenium 3400 NV)

MasterGlenium 3400ready-to-use high-range water-reducing admixture is a patented new generation of admixture based on polycarboxylate chemistry...

MasterGlenium 7101 (Formerly Glenium 7101)

MasterGlenium 7101 high-range water-reducing admixture is particularly effective in improving the day to day consistency of concrete mixtures. ...

MasterGlenium 7102 (Formerly Glenium 7102)

MasterGlenium 7102 high-range water-reducing admixture is particularly effective in improving the day to day consistency of concrete mixtures. ...

MasterGlenium 7500 (Formerly Glenium 7500)

MasterGlenium 7500 full-range water-reducing admixtureis very effective in producing concrete mixtures with different levels of workability...

MasterGlenium 7700 (Formerly Glenium 7700)

MasterGlenium 7700high-range water-reducing admixture is particularly effective in improving the day-to-day consistency of concrete mixtures. ...

MasterGlenium 7710 (Formerly Glenium 7710)

MasterGlenium 7710 ready-to-use highrange water-reducing admixture is particularly effective in improving the day to day control of concrete...

MasterGlenium 7511

MasterGlenium 7511 admixture is a ready-to-use high-range waterreducing admixture based on the next generation of polycarboxylate technology....

PS1466

PS1466 ready-to-use highrange water-reducing admixture is a new generation, patent pending admixture based on polycarboxylate chemistry. PS1466...

MasterRheobuild 1000 (Formerly Rheobuild 1000)

MasterRheobuild 1000 high-range, water-reducing admixture is formulated to produce rheoplastic concrete. Rheoplastic concrete flows easily,...

HIGH RANGE WATER REDUCING ADMIXTURE FOR CONCRETEHigh range water reducing admixture (ASTM C494 types F and G) decreases the water/cement ratio and provides high-performance, particularly at early ages. Matching the chemical admixture to the cementitious materials, both in type and dosage rate is important. Slump loss characteristics of the concrete will determine whether the high range water reducer should be introduced at the plant, at the site, or both locations. However, with the advent of newer generation products, sufficient slump retention can be achieved through plant addition in most cases. High range water reducers can be used in one or a combination of the following ways while minimally affecting setting time:1. Reduce the water-cement ratio while maintaining slump.2. Increase slump while maintaining a constant water-cement ratio.3. Reduce the cementitious materials content and water content while maintaining constant slump and strength.High range water reducers may serve the purpose of increasing strength through a reduction in the water-cement ratio while maintaining equal slump, increasing slump while maintaining equal water-cement ratio or a combination thereof. The method of addition should distribute the admixture uniformly throughout the concrete. Adequate mixing is critical to uniform performance. Problems resulting from non-uniform admixture distribution or batch-to-batch dosage variations include inconsistent slump, rate of hardening, and strength development.Most of the commercial formulations of high-range water-reducers belong to one of the following categories: Sulfonated melamine-formaldehyde condensates. Sulfonated naphthalene-formaldehyde condensate Modified lignosulfonates. Polycarboxylate derivatives.Sika ViscoCrete 2100High Range Water Reducing AdmixtureDescription Sika ViscoCrete 2100 is a high range water reducing and superplasticizingadmixture utilizing Sikas ViscoCrete polycarboxylate polymer technology.Sika ViscoCrete 2100 meets the requirements for ASTM C-494 Types A and F.Applications Sika ViscoCrete 2100 may be used in both ready mix and precast applications, asa plant added high range water reducer to provide excellent plasticity while maintainingslump for up to 90 minutes. Controlled set times make Sika ViscoCrete2100 ideal for horizontal and vertical applications.Sika ViscoCrete 2100 is ideal for production of Self Consolidating Concrete (SCC).Advantages Water Reduction: Sika ViscoCrete 2100 can be dosed in small amounts to obtainwater reduction from 10-15%, and will achieve water reduction up to 45% at highdosage rates.Sika ViscoCrete 2100 is suitable for all levels of water reduction.High Plasticity: The superplasticizing action of Sika ViscoCrete 2100 provideshigh-slump, flowing concrete that maintains excellent workability and may beplaced with minimal vibration even at very low water cement ratios as low as 0.25.Sika ViscoCrete 2100 plasticized concrete is highly fluid while maintaining completecohesion within the concrete matrix to eliminate excessive bleeding or segregation.Extended Slump Life and Set Control: Sika ViscoCrete 2100 has been formulatedto provide controlled and predictable extended slump life for periods of 60 to90 minutes with normal set times.The combined high range water reduction and superplasticizing action of SikaViscoCrete 2100 provide the following benefits in hardened concrete:n Higher ultimate strengths allow for greater engineering design flexibility andstructural economies.n Reduced water cement ratios produce more durable, dense concrete withreduced permeability.n Highly effective plasticizer reduces surface defects in concrete elements andimproves aesthetic appearance.It has been formulated to provide maximum water reduction and extended slumpretention at low dosages.How to UseDosage Dosage rates will vary according to materials used, ambient conditions and therequirements of a specific project. Sika recommends dosage at 1-6 fl. oz. per 100lbs. (65-390 ml/100 kg) of cementitious materials for conventional concreteapplications. If high slump or Self Consolidating Concrete (SCC) is required,typically dosage from 5-12 fl.oz./100 lbs. (325-780 ml/100 kg.) of cementitiousmaterials may be used.Dosage rates outside the recommended range may be used where specializedmaterials such as microsilica are specified, extreme ambient conditions are encounteredor unusual project conditions require special consideration. In this case,Please contact your local regional Sika office or Sika Technical ServiceDepartment 1-800- 933-7452 for more information and assistance.Product Data SheetEdition 5.21.2013Sika ViscoCrete 2100ConstructionKEEP CONTAINER TIGHTLY CLOSED KEEP OUT OF REACH OF CHILDREN NOT FOR INTERNAL CONSUMPTION FOR INDUSTRIAL USE ONLYAll information provided by Sika Corporation (Sika) concerning Sika products, including but not limited to, any recommendations and advicerelating to the application and use of Sika products, is given in good faith based on Sikas current experience and knowledge of its productswhen properly stored, handled and applied under normal conditions in accordance with Sikas instructions. In practice, the differences in materials,substrates, storage and handling conditions, actual site conditions and other factors outside of Sikas control are such that Sika assumes noliability for the provision of such information, advice, recommendations or instructions related to its products, nor shall any legal relationship becreated by or arise from the provision of such information, advice, recommendations or instructions related to its products. The user of the Sikaproduct(s) must test the product(s) for suitability for the intended application and purpose before proceeding with the full application of the product(s).Si ka reserves the right to change the properties of i ts products without notice. All sales of Si ka product(s)are subject to its current terms and conditions of sale which are available at www.sikacorp.com or by calling 800-933-7452.Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the products most currentTechnical Data Sheet, product label and Material Safety Data Sheet which are available at www.sikaconstruction.com or800-933-7452. Nothing contained in any Sika materials relieves the user of the obligation to read and follow the warnings and instructionfor each Sika product as set forth in the current Technical Data Sheet, product label and Material Safety Data Sheet prior to product use.SIKA warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical propertieson the current Technical Data Sheet if used as directed within shelf life. User determines suitability of product for intended use andassumes all risks. Buyers sole remedy shall be limited to the purchase price or replacement of product exclusive of labor or cost of labor.NO OTHER WARRANTIES EXPRESS OR IMPLIED SHALL APPLY INCLUDING ANY WARRANTY OF MERCHANTIBILITYOR FITNESS FOR A PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FORSPECIAL OR CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT INA MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS.Sika Canada Inc.601, Delmar AvenuePointe-Claire, QC H9R 4A9Phone: (514) 697-2610Fax: (514) 697-3087www.sika.caSika Corporation201 Polito AvenueLyndhurst, NJ 07071Phone: (201) 933-8800Fax: (201) 933-6225www.sikaconstruction.com1-800-933-SIKARegional Information and Sales Centers. For the location of your nearest Sika representative, contact your regional center.U.S. : North East Region: Fairless Hills, PA, Phone: (215) 295 -6600 North Central Region: Marion, OH, Phone: (800) 851-1545South East Region: Conyers, GA, Phone: (770) 760-1300 South Central Region: Mesquite, TX, Phone: (972) 289-6480Western Region: Santa Fe Springs, CA, Phone: (562) 903-3650Canada: Ontario: Mississauga, ON, Phone: (905) 795-3177, Alberta: Edmonton, AB, Phone: (780) 486-6111Quality Certification Numbers: Lyndhurst: FM 69711 (ISO 9000), FM 70421 (QS 9000), Marion: FM 69715, Kansas City: FM 69107, Santa Fe Springs: FM 69408Mixing For best superplasticizing results, add Sika ViscoCrete 2100 directly to freshlymixed concrete in the concrete mixer at the end of the batching cycle.Sika ViscoCrete 2100 may also be dispensed as an integral material during theregular admixture batching cycle or into freshly mixed concrete in a Ready-Mixtruck at the concrete plant.To optimize the superplasticizing effect, after the addition Sika ViscoCrete 2100Sika recommends that the combined materials be mixed for 80-100 revolutions,either in the concrete mixer or in the Ready-Mix truck.Combination with other admixtures: Sika ViscoCrete 2100 is highly effectiveas single admixture or in combination with other admixtures in the Sika System. Ifused in combination with certain Sikament high range water reducers it may affectthe plastic properties of fresh concrete. Please contact a Sika representative forfurther information.Combination with microsilica: Sika ViscoCrete 2100 is particularly well suitedfor use with microsilica because of its water reduction capability and superiorslump control.Packaging Sika ViscoCrete 2100 is available in 55 gallon drum (208 liter), 275 gallon totes(1040 liters) drums and bulk delivery.Storage and Shelf-life Sika ViscoCrete 2100 should be stored at above 35F (2C). If frozen, thaw andagitate thoroughly to return to normal state.Shelf life when stored in dry warehouse conditions between 50F and 80F(10C - 27C) is one year.Typical DataAppearance Light Blue liquid.Specific Gravity Approx. 1.1Caution: IRRITANT Contains aqueous polymer solution (CAS: Mixture). May cause eye/skin/respiratoryirritation. May be harmful if swallowed.Handling and Storage Avoid direct contact. Wear personal protective equipment (chemical resistantgoggles/gloves/clothing) to prevent direct contact with skin and eyes. Use only inwell ventilated areas. Wash thoroughly with soap and water after use. Removecontaminated clothing and launder before reuse.First Aid Eyes: Hold eyelids apart and flush thoroughly with water for 15 minutes. Skin:Remove contaminated clothing. Wash skin thoroughly for 15 minutes with soapand water. Inhalation: Remove person to fresh air. Ingestion: Do not inducevomiting. Dilute with water. Contact physician. In all cases contact a physicianimmediately if symptoms persist.Clean Up Use personal protective equipment (chemical resistant goggles/gloves/clothing).Without direct contact, remove spilled or excess product and place in suitablesealed container. Dispose of excess product and container in accordance withapplicable environmental regulations.