ht- 650 f - hitechsolution.co.in · our ht 650 f will get a great advantage. low volatility the low...

GENERATION FOUR ENGITECH LTD.

HT- 650 FHT- 650 FHT- 650 FHigh Temprature Chain Oil

www.hitechsolution.co.in

GENERATION FOUR ENGITECH LTD. IM

PO

RTIN

G

FORMULATIN

GMARKETING

DEL

IVER

ING

ANALYZINGNEEDS

Profile

Our Collaboration

SOURCE EXPLORER Ltd.

St Box No : 91642,Nathan Road.

TSIM SHATSUI, Hongkong.


Wait a sec!!!!!

Advance High Temp. Chain Oil Technology

Searching For Efficient High Temp. Chain Oil???Which can provide :• Protection from Chain Damages • Maintain Low Ampere Load• No Carbon Residue Problem• High Lubricity and Film Strength Then..... go for Hi-Tech HT 650F

Our Product

�Speed� �Innovation� �Excellence"

100% SyntheticBase Oil

Preparation

No Carbon ResidueProblem

Added AdvanceFriction Modifier

High Themal &OxidationStability

Low Volatility

TakifyingAdvantage

Hi- Tech Hi- Tech HT 650 FHT 650 FHi- Tech

HT 650 FHi- Tech Hi- Tech

HT 650 FHT 650 FHi- Tech

HT 650 FHigh Temp. Chain Oil


The G4’s DNA ?

Physical Properties

Composition

Mixture of synthetic Esters(100%)

Appearance

BrightGolden Orange

300°C572 °F

Max. Bulk Chamber Temp.

-10°C 14 °F

Pour Point

<90 ppm

Moisture content

Total Acid Numbers

0.01 mg KOH/g

Density

0.96 g/ml

Metal Compitibility (Corrosion)

Cast Iron - PassBronze - PassSteel - Pass

Flash point

(ASTM D-92)287°C548 °F

oat 40 c - 220 cstoat 100 c - 18 cst

oKinematic Viscosity @ 40 C



Under Standing & Advantages of HT‐650F

High Temp. Oxidation & Thermal Stability

Some non standard chain lubricants have a tendency to produce carbonaceus deposit and residues at elevated temperatures due to high oxidation these residues can block clearances, jam chain, rollers and make rapid wear to occur. because of our advance 100% Synthetic base fluids closed molecular structure the process of oxidation is greatly reduces. Thus carbon varnish and sludge deposits formed due to high temperature operation are negligible and user of our HT 650 F will get a great advantage.

Low Volatility

The low volatility technology used in our advance high temperature chain oil results in lower top-up requirements.

High Viscosity Index

This results in a minimum change in viscosity with temperature. the proper viscosity for proper chain lubricant is provided regardless of temperature and oil film withstand extreme pressure.

Excellent Lubricity

The technology used in our high temperature chain lube provides the lubricant with outstanding load carrying capabilities, films strength and anti-wear properties, this results in enhanced chain life.

Main Chain

Bottom

Pin

Entry Rail

Middle Rail

Chain Side View


Reduced Fire Possibilities

Because of low volatility & low carbon forming tendencies and their relatively high flash, fire and auto ignition points, the plant using HT 650 F is more safer in fire hazards.

Energy EfficiencySmokeless high temp chain lube, low volatility characteristics, low carbon forming tendencies and advance friction modifier results in reduction of drag and friction on the chain mechanisms. This results in a significant reduction in starting loads and peak power demand, thus providing a realistic power cost saving.

Baking Oven ChainsTenter Frame ChainsPaint and Ceramic Curing OvensDrying Oven ChainsKiln ChainsDrying & Finishing ChainsHeat Treatment ChainsHigh Temp. Tunnel ChainsChains for Fiber Optic CableLithographic OvensPlywood Drying Oven Glass Forming Equipment

HT‐650F Application ‐ Where a High Degree of Cleanliness is Required

Top LubeChain

Without Chain Oil

WithHT 650 F

Wear Test

Packing Availability

5 Ltr.

20 Ltr. (5Ltr. x 4)

210 Ltr.


How it Work

Friction means "resistance to relative motion between two bodies in contact" Our technologies mechanism of operation is based upon advance method of tribology that improves lubricity and load carrying capacity. this in turn, improves surface characteristics whiles simultaneously creating a stable chemical advantage boundary film on the contacting metal surfaces of equipment of which it is added the process of advance boundary films formation is achieved through a unique combination of long chain additives that are highly stable on high temperature

Advance Friction Modifiers are Polar Molecules having high affinity for metal surfaces and processing long alkyl chains.

Develop Advance Boundary Films

Reduces internal Heat

by that you will get long term Benefit

Chain Oil

Metal Particulates

Microsopic Flash

Contaminants

Lubrication Effects

V

Conventional LubricationF

Current Markets Chain OilF

V

Advance HT 650 FF

V

h

Develops lower coefficient of friction compare to other high temp. chain Oils

Oil Soluble TailAdditive

Polar Head

Testing Thermic Fluid India's Only Specialised Thermic Fluid Testing Lab Facility (Its true - Any lab can test your thermic fluid but you will get benefit only if test's are correct by conducted)

Above tests are essential ones and should be conducted every 4 months. We also undertake other tests relating to thermic fluids. For details contact :

Shri Dhansukh Jain - 092140 48652email : [email protected]

1. Send your Sample in clean, Contamination & moisture free bottle.

2. Send at least 750 ml to 1000ml of thermic fluid

3. It is better to draw sample through needle valve' while pump is running.

4. Throw 200 ml of oil and then collect the oil for sample testing.

5. For proper recommendation fill all columns in testing form.

6. Send Sample to -- Generation Four Engitech Ltd. Hitech Solution Mandeep Tower, Residency

R o a d , O p p . S a n k a l p Restaurant, Jodhpur (Raj)

Tel. : 0291-5107038 Mobile : 0 92140 486527. Guideline for Sending sample to

courier. A. Send Sample in Chemical

Sample Bottle Available in Indian Market.

B. Ensure that bottle/can is leakproof.

C. Fill the bottle 100% with no air.

D. Pack the sample in Square box with paper & plastics surrounding.

E. If your Packing is Poor, Courier will not accept the sample.

F. Write Proper Address in D e t a i l s w i t h P h o n e Numbers.

Guide Line O@40 C

Kinematic Viscosity

Flash point

ASTM D-92

Carbon Residue

Result are in %

Suspended Particle & Contamination

Increase in carbon will increase your fuel cost and decrease your machine performance. It is an economical test.

It reflects your fire risk, due to Thermic Fluid which is important for safety.

It is very Important test to check your fluids proper flow rate. i.e. how fas t i s hea t transfer.

We check your oil for suspended particle and contamination, whether parameter exceeds.



“Award presented by : Mrs. Shikha Sharma – MD and CEO, Axis Bank”“Award presented by : Mrs. Shikha Sharma – MD and CEO, Axis Bank”“Award accepted by: Mr. Dhansukh Chopra (Director) “Award accepted by: Mr. Dhansukh Chopra (Director)

and Mr. R. P. Vyas (Director) GFEL”and Mr. R. P. Vyas (Director) GFEL”

“Award presented by : Mrs. Shikha Sharma – MD and CEO, Axis Bank”“Award accepted by: Mr. Dhansukh Chopra (Director)

and Mr. R. P. Vyas (Director) GFEL”

AXIS BANK

BUSINESSGaurav

SME AWARDS 2012

Under Sector Under Sector �Chemical and Petrochemicals� �Chemical and Petrochemicals�

as Best as Best Micro Enterprise in IndiaMicro Enterprise in India

Under Sector �Chemical and Petrochemicals�

as Best Micro Enterprise in India

Third Party Recognition


Our Golden Clients

ADANIwilmar

ADANI WILMAR AGARWAL FOOD UDAIPUR ASHOKA CHEM FOOD ASHWIN VANASAPTI VAPI BIKAJI

BRINK FOODS BUNGE COOKWELL FOOD DABUR GOVERDHAN INDUSTRIES

JAGANNATH CHEM, NAWA JAYANTI AGRO, ALWAR JK TYRES JYOTHY LABORATORIES LTD.KANDLA ENERGY

AND CHEMICALS LTD.

KR FOODS LTD. KUBER FOODS LALIT HANS PROTEIN MANAKSIA LTD MARICO

MARUTI TEXTILES MAYUR UNIQUOTERS LTD. METRO PLYWOOD PVT. LTD. MOTHERLAND GARMENTS

MOTIF DECOR PANKAJ SALT INDUSTRIES, NAWA

PARAS VANASPATI

PVT. LTD. RAIPUR PAWAN AGRO INDUSTRIES PIDILITE

PURTI GROUP RACHNA PLASTICIZERS RISHABH RESINS RUCHI SOYA LTD. SK OIL INDUSTRIES

SNR RECLAMATIONS PVT. LTD. SABOO SODIUM SAHIB SYNTHETICS SHREE NAMAK SOMI CONVEYOR BELT

SUPER FLOORINGS TEX CORP DELHI TIPCO VE COMMERCIAL VEHICLES LTD. VIJAY SOLVEX LTD

VOLTAMP TRANSFORMERS LIMITED YETI POLYCHEM, NEPAL MARUDHAR PAINTS HOMTEK AGRO INDIA AGRO TEC FOOD LTD.

sAhIB synthEtICs

SILICON JEWEL INDUSTRIES


Actual Photographs of Generation Four Engitech Ltd. Manufacturing Plant

StorageStorageStorage

Plant’s Wide ViewPlant’s Wide ViewPlant’s Wide View

Additive Blending VesselsAdditive Blending VesselsAdditive Blending Vessels

2000 Ltr.2000 Ltr.2000 Ltr.

25000 Ltr. 2 Blending Vessels25000 Ltr. 2 Blending Vessels25000 Ltr. 2 Blending Vesselswith Hot & Cold Facilitywith Hot & Cold Facilitywith Hot & Cold Facility

3000 Ltr.3000 Ltr.3000 Ltr. 3000 Ltr.3000 Ltr.3000 Ltr.


Actual Photographs of Generation Four Engitech Ltd. Regd. Office

Office FrontOffice FrontOffice Front

Director’s RoomDirector’s RoomDirector’s Room

Top ManagementTop ManagementTop Management

Back OfficeBack OfficeBack Office

Conference RoomConference RoomConference Room

Accounts RoomAccounts RoomAccounts Room


Silicon Green 100% Synthetic Thermic Fluid

High Oxidation Stability

Reduces Problemof Low & High

Boilers

Almost NegligibleCarbon Contents

Lower Top UpRequirement

Has Long Life

High Thermal Stability

Hi- Tech Hi- Tech Therm 60Therm 60Hi- Tech

Therm 60Hi- Tech Hi- Tech

Therm 60Therm 60Hi- Tech

Therm 60

Why to use Hi-Tech Therm 60 as new fill or Top-up in your thermic fluid heater.1. Less tendency to increase viscosity 2. Very low carbon residue3. Carbon protection technology.


Technical Support (Multi Tiered Technical Support)

Our technical support services are divided into III tier in order to better serve our customer base.

TIER - I 1. This is initial support

level responsible for basic customer issues.

2. It starts with determining the customer’s issue by analyzing the sample.

3. Once identification of the underlying problem is done “ The specialist begins sorting through the possible solutions available

TIER II 1. More in depth technical support level2. Administrative level support.3. Include onsite inspection of system design & networking.4. Compatibility related issues in case of Top-ups on other fluids

TIER III1. Highest level of support.2. Back end support for handling the most difficult or advanced

problem.

Experienced technical service specialist can answer your questions regarding heat transfer fluid selection, system start-ups, system design, and operational issues.call us on:__________or contact : [email protected]

Technical Service

Generation Four Engitech Ltd. - Hitech SolutionMandeep Tower, Residency Road, Opp. Sankalp Restaurant, Jodhpur (Raj)Tel. : 0291-5107038 Fax : 0291-5109091 Mobile : 0 92140 48652

We�are�located�at:

Contact Details :

Admn. Office :Hitech SolutionMumbai Bazar, 387-Last Bus Stop, Park Side, Vikhroli (W) Mumbai -79

Regd. Office :

Collaboration with :SOURCE EXPLORER Ltd.St Box No : 91642,Nathan Road. TSIM SHATSUI, Hongkong.

Local Representative :

Disclaimer : Generation Four Engitech Ltd. makes every effort to ensure that the information and data provided are correct. However we can accept no liability or guarantee that the information and data provided is up-to-date, correct and complete. Nor is Generation Four Engitech Ltd. responsible for the contents of such reference information. Generation Four Engitech Ltd. reserves the right to modify of supplement the information or data provided without prior notice.

[email protected] [email protected] [email protected]

Mfg. Plant :Generation Four Engitech Ltd.Plot No. 25-A, Raipur Sahakari Industrial Area, Raipur Bhagwanpur, Roorkee, Uttarakhand. Mobile : 09760366343

www.hitechsolution.co.inwww.g4ltd.co.in

ht- 650 f - hitechsolution.co.in · our ht 650 f will get a great advantage. low volatility the low...

Documents