hth products catalogue ff2008!08!240 275

FF 8.240

8

New products and systems: www.hafele.com

We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫

Sliding Door Fittings, Roller ShuttersPivot Sliding Door Fittings

Set

Adjustable guide bolt installation

Application

Guide bolt, adjustable

Guide bolt

Packing: 1 or 50 sets

Installation of pivot sliding door fitting

Track, length 140 mm


Allen key

⌫ ⌫ ⌫ ⌫ ⌫

• Door height: Max. 800 mm for flaps

• Material: Plastic track, stainless steel guide bolt

• Finish: Brown track, RAL 8014, galvanized guide bolt

• Installation: Track for press fitting into groove,

guide bolt for plugging into drilling

Infront for light doors and flaps, for 1 door⌫⌫⌫

Cat. No.

Running gear

408.01.009

Set components

For 1 door


2


2

Guide bolt

2

Guide bolt, adjustable

2

SW 3 Allen key⌫

1

FF 8.241

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


⌦⌫ ⌦

⌫ ⌫ ⌫ ⌦

⌫

Packing: 1 Pair

Set

Mounting Infront

Mounting Vorfront

Installation length = min. cabinet depthExtension length = max. door width, push-in depth

Extension length

⌫

Installation length

• Door height: Max. 1,065 mm

• Door width: Max. 610 mm

• Door thickness: 19 – 38 mm

• Material: Steel

• Finish/Colour: Nickel plated, black

• Installation: Runners for screw fixing to cabinet with mounting

brackets , full 19 mm overlay

• Auto-open pushes cabinet doors open the last 32 mm of travel to

ensure doors are fully extended

Infront or Vorfront Pivot sliding door, door weight up to 14 kg ⌫⌫

Installation length

A Extension length

Cat. No.

405 mm 203 mm 290 mm 408.34.341456 mm 254 mm 340 mm 408.34.346506 mm 305 mm 391 mm 408.34.351557 mm 356 mm 442 mm 408.34.356608 mm 406 mm 493 mm 408.34.361659 mm 457 mm 544 mm 408.34.366710 mm 508 mm 594 mm 408.34.371

A B19 mm 9.5 mm22 mm 9.5 mm25 mm 9.5 mm38 mm 9.5 mm

A B C19 mm 12.7 mm 19 mm22 mm 12.7 mm 16 mm25 mm 12.7 mm 13 mm32 mm 12.7 mm 6 mm

FF 8.242

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


With Ø 35 mm drilling

Ø With shortened intermediate panel

⌫

Fitting to intermediate panel

To adjust the control arm of the concealed hinge, either shorten

intermediate panel or drill hole in intermediate panel

Gap

Door

Wooden strut

Installation with mounting brackets on cabinet top and base

⌦

Mounting bracket

⌦

Concealed hinge

Wooden strut

Cruciform mounting plate

Guide

Dimension B

Installation with mounting brackets to cabinet top and base

⌦

Application and planning dimensions

Wooden strut for connecting top and bottom guides must be supplied

by customer:

Length = internal carcase height - 70 mm

⌫

⌫ ⌫

⌦

• Door height: Max. 700 mm (max. 1,800 mm in combination with

synchro control)

• Door thicknesses: 16 – 20 mm

• Material: Steel

• Finish: Galvanized

• Installation: Guides for screwing onto cabinet top or base or

to intermediate panel with mounting brackets

Infront Pivot sliding door, door weight up to 5.5 kgFor maximum door weight of 5.5 kg (max. 25 kg in combination with synchro control) for 1 or 2 doors

⌫⌫ ⌫

Door

Gap

Door

Gap

Wooden strut

Centre panel

Wooden strut

FF 8.243

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Set

Set

Packing: 1 or 100 pcs.

• Material: Plastic

• Installation: Press fitting

Cover cap for 35 mm drilling with shortened intermediate panel

°

Order reference

• Concealed hinges with opening angle of 94°, cruciform mounting

plates and cover caps for covering the cup drillings are not included

in the set. Please order separately.

Packing: 1 pair

Drilling depth in accordance with concealed hinge

⌦⌫

Door offset

Fit cruciform mounting plate to guide. When using DUOMATIC concealed

hinges toolless, fix cruciform mounting plates to wooden strut.

° ⌫

Installation of concealed hinges and cruciform mounting plates

Use concealed hinges with opening angle of 94° and maximum offset of 8 mm for door mounting.

Colour⌫

Cat. No.

White⌫

340.41.702

Brown⌫

340.41.104

Set components

For 1 door

Guide

1 pair

Mounting bracket⌦

4 pcs.

Set of installation instructions

1 pc.

Guide length

Dimension B

Max. possible push-indepth

⌦ Cat. No.

350 mm 186 mm 244 mm 408.07.350

400 mm 236 mm 294 mm 408.07.403

450 mm 286 mm 344 mm 408.07.458

500 mm 336 mm 394 mm 408.07.501

550 mm 386 mm 444 mm 408.07.556

600 mm 436 mm 494 mm 408.07.609

FF 8.244

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Infront pivot sliding door synchro control, door weight up to 25 kg⌫ ⌫⌫

• Area of application: Ensures that the door runs parallel when using

the infront pivot sliding door fitting up to 5.5 kg

• Door weight: Max. 25 kg


• Door thicknesses: 16 – 20 mm

• Material: Toothed rail made of steel and plastic, pinion and guide

for profile rod made of plastic

• Installation: Screw fixing

Toothed rail

Wooden strut

Profile rod

Profile rod guide

Fixing screw

Pinion with srew mount

⌫⌦

Profile rod

Installation of concealed hinges and cruciform mounting plates

Drilling depthin accordance withconcealed hinge

⌦⌫

Gap

Fix cruciform mounting plate to wooden strut.

A distance of at least 122 mm must be maintained when fitting

concealed hinges.

⌫

FF 8.245

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Length of guide, with infront pivot sliding door fitting

Cat. No.

350 mm 408.05.356400 mm 408.05.409450 mm 408.05.454500 mm 408.05.507550 mm 408.05.552600 mm 408.05.605

Order reference

The set does not include the profile rod. Please order separately.

Packing: 1 set

Set components

For 1 door

Toothed rail

1 pair

Pinion with screw mount⌫⌦

2 pcs.

M 4 x 25 Fixing screws for screw mount ⌧ ⌫⌦

4 pcs.

Profile rod guide

1 pc.

Set of installation Instructions

1 pc.

Profile rod

• Material: Steel

• Finish: Nickel plated

• Diameter: 8 mm

⌫ ⌫

Length

Cat. No.

2.0 m 226.67.205Packing: 1 pc.

Profile rod length = internal carcase height - 63 mm

Set

FF 8.246

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


EXL Infront or Vorfront, door weight up to 16 kg ⌫⌫


• Door thicknesses: 16 – 32 mm for Infront, 19 – 22 mm for Vorfront

• Push-in depth: Max. 230 – 550 mm

• Material: Steel guide and cord, plastic guide roller

• Finish: Black galvanized guide, black plastic sleeved cord

• Installation: Screwing in 32 mm series drilled holes

⌦ ⌫ ⌫ ⌫

Guide

Cruciform mounting plate

Concealed hinge

Cord

Fixing Screws

Door stop

Application

Installation of guide

Installation of guide

Mount guides directly to top

or base of cabinet.

⌫

FF 8.247

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Cord tension adjustment

Adjust door height and cord tension by rotating the adjusting screw.

Guide

Push-in depth

⌦Length of guide

Guide length

Max. possible push-indepth

⌦ Cat. No.

340 mm 230 mm 408.25.335

408 mm 294 mm 408.25.340

440 mm 326 mm 408.25.345

504 mm 390 mm 408.25.350

536 mm 422 mm 408.25.355

600 mm 486 mm 408.25.360

664 mm 550 mm 408.25.365

Order reference

Please order door fixing set separately.

Packing: 1 set

Set components

For 1 door

Guide

1 pair

Cord with adjusting screw

2 pcs.

Set of installation instructions

1 pc.

Set

FF 8.248

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Door fixing set


• Fitting door to carcase: Without tools (CLIP system)

For inset mounting (Infront), door thicknesses 16 – 19 mm

Drilling dimensions for cup fixing

Supplied with2 Concealed hinges with opening angle of 95°, 8 mm crank4 Fixing screws for concealed hinges, Ø 5 x 15 mm2 Cruciform mounting plates4 Fixing screws for cruciform mounting plates, M4 x 5 mm2 Door stops2 Fixing screws for door stops, Ø 3.5 x 25 mm10 Fixing screws for guide, Ø 4.0 x 12 mm

° Ø ⌧ ⌧ Ø ⌧ Ø ⌧

Door thickness+ 1 mm

For inset mounting (Infront), door thicknesses 19 – 32 mm


Supplied with2 Concealed hinges with opening angle of 95°, 16 mm crank4 Fixing screws for concealed hinges, Ø 3.5 x 15 mm2 Cruciform mounting plates4 Fixing screws for cruciform mounting plates, M4 x 5 mm2 Door stops2 Fixing screws for door stops, Ø 3.5 x 25 mm10 Fixing screws for guide, Ø 4.0 x 12 mm

⌧ ⌧ ⌧ ⌧


Cat. No.

For 1 door

408.24.020

Packing: 1 set



Cat. No.

For 1 door

408.24.002

Packing: 1 set

FF 8.249

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Packing: 1 set




⌧ ⌧ ⌧ ⌧

Supplied with2 Concealed hinges with opening angle of 95°, 8 mm crank4 Fixing screws for concealed hinges, Ø 3.5 x 15 mm2 Cruciform mounting plates4 Fixing screws for cruciform mounting plates, M4 x 5 mm2 Door stops2 Fixing screws for door stops, Ø 3.5 x 25 mm10 Fixing screws for guide, Ø 4.0 x 12 mm


For corner mounting (Vorfront), door thicknesses 19 – 22 mm

Cat. No.

For 1 door

408.24.011

FF 8.250

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Infront or Vorfront Pivot sliding door, door weight up to 34 kg ⌫⌫

• Door height: 915 – 2,000 mm

• Door width: 255 – 660 mm


• Material: Steel

• Finish: nickel plated black

• Installation: vertical with cable system

Hinge carrier strip

*For installation length 303/354/405 mmInstallation length = min. cabinet depthExtension length = max. door width, push-in depth

⌦⌦

Installation length

Dim. A

Dim. B

Extension length⌦

Cat. No.

303 mm _ 257 mm 210 mm 408.24.530

354 mm _ 307 mm 261 mm 408.24.535

405 mm _ 358 mm 312 mm 408.24.541

456 mm 178 mm 409 mm 343 mm 408.24.546

506 mm 203 mm 460 mm 394 mm 408.24.551

557 mm 229 mm 511 mm 445 mm 408.24.556

608 mm 254 mm 561 mm 496 mm 408.24.561

659 mm 279 mm 612 mm 546 mm 408.24.566

710 mm 305 mm 663 mm 597 mm 408.24.571Packing: 1 pair

Order reference

Hinge carrier strip and door mounting set are not included in the set.

Please order separately.

Supplied with

1 pair Slides with cables and mounting material

Set for 1 door

Installation length

Extension length

⌦

Hinge carrier strip set

Cat. No.

For 1 door

408.24.090

Packing: 1 Set

Door height

Used hinge carrier set⌫

915 – 1,422 mm For 1 door

1 set

915 – 1,422 mm For 2 doors

2 sets

1,423 – 2,000 mm For 1 door

2 sets

1,423 – 2,000 mm For 2 doors

3 sets

Order reference for hinge carrier strip set

⌫ ⌫

FF 8.251

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Door height

Used hinge⌫

Used mounting set⌫

915 – 1,193 mm 3 pcs.

2 sets

1,194 – 1,498 mm 4 pcs.

2 sets

1,499 – 1,803 mm 5 pcs.

3 sets

1,804 – 2,000 mm 6 pcs.

3 sets

Order reference for door mounting set

Infront door mounting set

Dim. C

Dim. D

Dim. E

Dim. F

Dim. G

19 mm 8 mm 2.3 mm 51 mm 1.4 mm

19 mm 9 mm 1.8 mm 51 mm 0.3 mm

19 mm 15 mm 2.3 mm _ 14.4 mm

21 mm 15 mm 2.3 mm _ 12.8 mm

22 mm 15 mm 2.3 mm _ 11.2 mm

24 mm 15 mm 2.3 mm _ 9.6 mm

25 mm 15 mm 2.3 mm 57 mm 8.0 mm

27 mm 15 mm 2.3 mm _ 6.4 mm

29 mm 15 mm 2.3 mm _ 4.8 mm

30 mm 15 mm 2.3 mm _ 3.2 mm

32 mm 15 mm 2.3 mm 64 mm 1.6 mm

Door thickness

Cat. No.

19 – 20 mm Hole, diameter 35 mm

408.24.092

22 – 32 mm Hole, diameter 40 mm

408.24.094

Supplied with

2 Clip-on hinge

2 Mounting base plate

2 Hinge base spacer

Mounting material

Packing: 1 set

Vorfront door mounting set

Dim. C

Dim. D

Dim. E

Dim. F

19 mm 15 mm 11.5 mm 58 mm

Door thickness

Cat. No.

19 mm Hole, diameter 40 mm

408.24.093

Packing: 1 Set

⌫

Supplied with

2 Clip-on hinge

2 Mounting base plate

2 Hinge base spacer

Mounting material

⌫

FF 8.252

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Infront Hawa Fiero 25/35, door weight up to 25 or 35 kg ⌫⌫

• Door height: 700 – 2,250 mm or 2,251 – 2,850 mm


• Centre panel thickness: 19 – 21 mm

• Adjusting facility: The installed door can be adjusted vertically,

laterally and in tilt angle

• For laterally sliding-in cabinet doors

• Mounting exclusively on the inside panel.

• The hardware must be easily accessible at all times (detachable in

side or outside panel).

Pantograph scissors

Pantograph bearing, rear end

Upright guidechannel

Roller track.

Door guide

Door guidechannel

Vertical adjustmentscrew

Deflection pulley.

Contactplate

Concealed hinge

Upright guide

Application

Mounting

DimensionA B C D E F

19 – 23 mm 46 mm 12 – 8 mm 3 mm - -

24 mm 47 mm 8 mm 4 mm 11 mm 1 mm

25 mm 48 mm 8 mm 5 mm 11 mm 2 mm

26 mm 49 mm 8 mm 6 mm 11 mm 3 mm

27 mm 50 mm 8 mm 7 mm 11 mm 4 mm

28 mm 51 mm 8 mm 8 mm 11 mm 5 mm

Hawa Fiero 25

⌫

⌫ ⌫⌫

FF 8.253

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Internal cabinet height

Max. push-in depth⌦⌫

Max. distance

For 1 door, right,

For 1 door, left

700 – 900 mm 350 mm 445 mm 407.70.010 407.70.110901 – 1,200 mm 470 mm 565 mm 407.70.027 407.70.1251,201 – 1,800 mm 500 mm 595 mm 407.70.036 407.70.1341,801 – 2,250 mm 530 mm 625 mm 407.70.045 407.70.143

• Door height: 700 - 2,250 mm

Order reference

Instead of a groove in the top door edge (from 1,800 mm also in door bottom edge),

a guide track can be surface mounted. Please order separately.

Infront Hawa Fiero 25, door weight up to 25 kg ⌫⌫

Packing: 1 Set

Set

Installation dimension

H = Clear dimension between cabinet floor and top

E = Max. retraction of door

T = Max. permissible distance for hardware installation

from the interior of the closed door to the back edge of the

hardware system.

⌦

⌫ ⌦

⌫

FF 8.254

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫



For 1 door, right,

For 1 door, left

2,251 - 2,850 mm 407.70.054 407.70.152

Infront Hawa Fiero 35, door weight up to 35 kg ⌫⌫


• Max. push-in depth: 530 mm

• Max. distance: 625 mm





hardware system.

Order reference

Instead of a groove in the top door edge (from 1,800 mm also in door bottom edge),

a guide track can be surface mounted. Please order separately.

Packing: 1 Set


⌦⌫

⌦

⌫ ⌦

⌫

Installation sample,

top Hawa Fiero 35 solution and

bottom Hawa Fiero 25

FF 8.255

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Colour⌫

Cat. No.

Brown⌫

407.70.205

White⌫

407.70.214

Black⌫

407.70.223

Packing: 1 pc.

• Area of application: Instead of a groove on the upper door edge,

(from 1,800 mm on the bottom door edge, too), a special guide

profile may also be installed on the inside panel.


• Length: 296 mm

• Installation: For scew fixing

Mounting

Order reference

1 profile is required for door heights from 700 to 1,800 mm and 2 are

required for door heights over 1801 mm.

Accessories Infront Hawa Fiero 25/35 Surface mounted guide-profile

⌫

⌫ ⌫

⌫⌫ ⌦ ⌫⌫

FF 8.256

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Infront Hawa Turnaway 25/X2 and 35/X3, door weight up to 25 or 35 kg ⌫⌫

• Door height: 650 – 1,800 mm or 1,801 – 2,450 mm


• Height adjustment: With hexagon socket-head screw

• Mounting on the exterior of the cabinet

• Covered by a removable interior panel

• For laterally sliding-in cabinet doors

Upright guide profile

Roller track

Upright guide profile

Pantograph bearing, lower

Tension spring

⌦

Door guide channel

Hinges

Upright

Pantograph scissors

Vertical adjustment screw

Vertical adjustment

Adjust door clearance vertically.

Loosen bottom front-end pantograph bearing, adjust door clearance

by means of the vertical adjustment screw and retighten screws.

Application

Vertical adjustment screw

⌫⌫ ⌫

⌦

FF 8.257

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫



Max .push-in depth⌦⌫

Max. distance

For 1 door, right

For 1 door, left

650 – 1,050 mm 450 mm 515 mm 407.72.050 407.72.1501,051 – 1,200 mm 700 mm 765 mm 407.72.067 407.72.1651,201 – 1,500 mm 780 mm 845 mm 407.72.076 407.72.1741,501 – 1,800 mm 820 mm 885 mm 407.72.085 407.72.183

Infront Hawa Turnaway 25/X2




Max. push-in depth⌦⌫

Max. distance

For 1 door, right

For 1 door, left

1,801 – 2,450 mm 820 mm 885 mm 407.73.055 407.73.153

Infront Hawa Turnaway 35/X3


• Door height: 1,801 – 2,450 mm


Packing: 1 set

Set

Packing: 1 set

Set

Order reference

Laterally sliding-in folding doors can be used with this pivot sliding door fitting with maximum door weights of 20 kg (40 kg per pair of doors).

For this purpose please order additionally HAWA FOLDING TURNAWAY 15/20 fitting.





hardware system.

⌦

⌫ ⌦

⌫

FF 8.258

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Folding/turning fitting Hawa Folding Turnaway 15/20, door weight up to 15 or 20 kg⌫ ⌫⌫

• Area of application: Supplementary hardware system for bi-folding

furniture doors combined with HAWA-Turnaway 25/X2 and 35/X3.


Door weight: Max. 15 kg (pair of door 30 kg)

• Door height: 1,501 – 2,450 mm

Door weight: Max. 20 kg (pair of door 40 kg)

• Door width: Max. 600 mm


• Top and bottom guide, top with 1 plastic roller

Mounting

Application

Mounting surface equalizer for side wall

End stopper

Guide

Stop bracket with magnet

Bottom guide channel

Deflection piece

Concealed centre hinge

Surface equalizer for side wall

Interlocking fitting

⌦

Retainer

Door guide

⌫

⌫

FF 8.259

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Order reference

Infront Hawa Turnaway 25/X2 and 35/X3 are not included in the set. Please order separately.

Cat. No.

For 1 door, right

407.73.063

For 1 door, left

407.73.161

Packing: 1 Set

Set

The Hawa-Folding Turnaway 15/20 is a supplementary hardware system for folding and

turning away two furniture doors with a panel weight up to 20 kg (44 lbs.).

The second door is guided in a bottom guide channel with a suspending and a guide

element when it is opened and turned away. When the doors are closed, they are guided

in the suspending element. This means that the horizontal door groove clearance is always

the same. A retainer positions the panels at the bottom and holds them flush when closed.

⌫ ⌫⌫ ⌫ ⌦ ⌫⌦⌫

FF 8.260

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫

Sliding Door Fittings, Roller ShuttersRoller Shutters

Guide profile

Prefabricated shutters

• Material: Aluminium and plastic profile, plastic accessories,

steel and aluminium spring loaded shaft

• Weight: With profile height of 18 mm: 8.5 kg/m., with profile height

of 24 mm: 6.0 kg/m.

• Running direction: Vertical or horizontal

• Profile heights: 18 mm or 24 mm

• Profile thickness: Without glide ends 8 mm, with glide ends 10 mm

• Lock strip: Height: 56 mm, thickness: 15.5 mm

• Mounting: For front hung or inset installation

• Version: Roller shutter module ready for installation, for front hung

or inset installation with screwed-on guide tracks and shutter

housing guide

• Installation: Sliding into carcase

• Weight compensation: By spring loaded shaft with adjustable

spring power, included in the delivery

• Motor drive: Recommended from carcase widths min. 600 mm

Front panel

Lock strip

Glide

For carcase dimensions

Profile height

Internal carcase width

Internal carcase height

18 mm 382 – 460 mm 300 – 800 mm461 – 1,500 mm 300 – 1,900 mm

24 mm 382 – 460 mm 300 – 1,000 mm461 – 1,600 mm 300 – 1,900 mm

Minimum installation depth

⌦Max. internal carcase height

Min. installation depth⌦

1,200 mm 300 mm1,600 mm 380 mm1,900 mm 440 mm

Vertical

Left

Left and rigth

Supplied withAccording to ordering information, ready-to-install roller shutter module with: 1 Prefabricated roller shutter made of roller shutter profiles with joint

seals1 Lock strip with glide ends and glide rollers2 Guide profiles1 Front panel1 Counterbalancing mechanism consisting of 1 spring shaft with gears1 Pair of shutter housing guides

DDiirrcceettiioonn ooff cclloossiinngg

⌫ ⌫

⌫ ⌫ ⌦ ⌫ ⌫

⌫ ⌦

VERSION A-MODUL Roller shutters, with guide profile and shutter housing guide

⌫⌫⌫

⌫ ⌫ ⌫

Order referenceWhen ordering, please specify additionally to catalogue number:• Internal carcase width• Internal carcase height• When ordering powder coated finish: RAL colour• Number of roller shutter modules• Lock, handle or inset handle• Running direction, vertical or horizontal

Horizontal

Rigth

FF 8.261

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


Front hung installation

⌫Note

We recommend a roller shutter motor drive from

carcase widths of 600 mm.

⌫ ⌦

Finish/Colour⌫

Profile height

Profile type

Cat. No.

Silver coloured anodized⌫

18 mm – 442.98.90024 mm – 442.98.91024 mm Groove design

442.98.920

Ground, stainless steelcoloured anodized⌫

18 mm – 442.98.000

24 mm – 442.98.010Powder coated in RALcolours⌫


442.98.620

Packing: 1 set

Shutter housing guide

Spring loaded shaft

Guide profile

A = Internal carcase width

Inset installation

Finish/Colour⌫

Profile height

Profile type

Cat. No.



442.99.920

Ground, stainless steelcoloured anodized⌫

18 mm – 442.99.000

24 mm – 442.99.010Powder coated in RALcolours⌫


442.99.620

Note

We recommend a roller shutter motor drive from

carcase widths of 600 mm.

⌫ ⌦

Shutter housing guide

Spring loaded shaft

Guide profile

A = Internal carcase width

Packing: 1 set

FF 8.262

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Bearing

Prefabricatedshutters

• Material: Aluminium profile, accessories, guide track and bend

made of plastic, stabilisaing shaft made of steel and aluminium

• Colour: Guide track and bend silver coloured or black

• Type of guide: With running track and bend

• Running direction: Vertical or horizontal

• Profile heights: 18 mm, 24 mm or 34 mm

• Profile thickness: Without glide ends: 8 mm, with glide ends

10 mm, with horizontal running direction: 18 mm

• Lock strip: Height: 39 mm, thickness: 18 mm

• Version: Prefabricated

• Installation: Guide track for groove mounting, stabilising shaft for

screw fixing

⌫ °

⌫ ⌫ ⌫ ⌫ ⌫ ⌫

Front panel

Glide

Guide track


Profileheight

Profile type


Max. internalcarcase height

18 mm Single-walled⌫

Max. 800 mm (without stabilising shaft) ⌫

2,000 mm

801 – 1,500 mm(with stabilising shaft) ⌫

2,000 mm


Max. 800 mm (without stabilising shaft) ⌫

2,000 mm

801 – 1,500 mm (with stabilising shaft) ⌫

2,000 mm

24 mm Double-walled

Max. 800 mm

2,000 mm


Max. 800 mm

2,000 mm

34 mm Double-walled

Max. 800 mm

2,000 mm

Lock strip

Bend

°

Stabilising shaft• From an internal carcase width of 800 mm supplied

(also for smaller versions on request)• Only for single-walled profiles and up to a profile height of 24 mm• Fitted to front or rear

⌫ ⌦ ⌫ ⌫ ⌫ ⌫

Length of prefabricated roller shutterThe length of the prefabricated roller shutter determinesthe weight anddetermines whether a counterbalancing mechanism/motor drive is needed.Length without stabilising shaft: H = Internal carcase height + 50 mmLength with stabilising shaft: H = Internal carcase height +100 mmThe prefabricated roller shutter is extended by the carcase depth:• If the stabilising shaft is fitted in the rear carcase area• If counterbalancing mechanism, Cat. No. 442.09.903 is used

⌫ ⌫ ⌦ ⌫

Weight

Profile height

Profile type

Weight


8.5 kg/m²

24 mm – 6.0 kg/m²

24 mm Double-walled

8.0 kg/m²

34 mm – 5.5 kg/m²

34 mm Double-walled

7.5 kg/m²

VERSION B Roller shutters, with running track and bend °°

Counterbalancing mechanismThe roller shutter is easy to operate up to a weight of 10 kg. For heavier roller shutters we recommend one of the following options:• Version A-Modul• Version C with spring loaded shaft• Motor drive• Counterbalancing mechanism

⌫⌫ ⌫⌫⌫

FF 8.263

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫



Installation without stabilising shaft

⌫

Installation with stabilising shaft

⌫

Guide track

Front panel



Note

Profile height 24 mm double-walled and profile height 34 mm can

only be used for an internal carcase width of up to 800 mm.

⌫⌫

Order referenceWhen ordering, please specify additionally to catalogue number:• Internal carcase width• Internal carcase height• Carcase depth (when using counterbalancing mechanism or

stabilising shaft installed in rear carcase area, respectively)• When ordering powder coated finish: RAL colour• Guide tracks and corner tracks in black or silver coloured• Lock, handle or inset handle• Running direction, vertical or horizontal• Number of roller shutters

⌫ ⌦

⌫ ⌫ ° ⌫ ⌫

Finish/Colour⌫

Profile height

Profile type

Cat. No.



442.71.900

24 mm – 442.71.91024 mm Groove design

442.71.950

24 mm Double-walled

442.71.920

34 mm – 442.71.93034 mm Double-walled

442.71.940

Ground, stainless steel coloured anodized⌫

18 mm – 442.71.00024 mm 442.71.01024 mm Double-walled

442.71.020


442.71.040

Powder coated in RAL colours⌫


442.71.650

24 mm Double-walled

442.71.620


442.71.640

Packing: 1 set

⌫⌫⌫

Supplied withPrefabricated according to ordering information:1 Prefabricated roller shutter made of roller shutter profiles with joint seals1 Lock strip with glide ends1 Set of guide profiles4 Curve tracks1 Front panel1 Counterbalancing mechanism from 1 spring loaded shaft

FF 8.264

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


VERSION C Roller shutters, with guide profile and spring loaded shaft

⌫⌫⌫

Supplied with

Prefabricated according to ordering information:

1 Prefabricated roller shutter made of roller shutter

profiles with joint seals

1 Lock strip with glide ends

1 Set of guide profiles

1 Front panel

1 Counterbalancing mechanism from 1 spring loaded shaft

Roll diameter of rolled-up roller shutters


Bearing Ø 50 mm

Ø

Lock strip

Prefabricated shutters

Front panel

⌫ ⌫

⌫ ⌫ ⌦

• Material: Aluminium and plastic profile, plastic accessories,

steel and aluminium spring loaded shaft

• Type of guide: With screwed-on guide profiles and weight

compensation by spring loaded shaft

• Running direction: Vertical

• Profile thickness: Without glide ends: 8 mm with glide ends: 10 mm

• Lock strip: Height: 39 mm, thickness: 18 mm

• Mounting: For inset installation

• Version: Prefabricated

• Installation: Guide profiles and spring loaded shaft for screw fixing

• Weight compensation: By spring loaded shaft with adjustable

spring power, included in the delivery

Spring loadedshaft Ø 42/50 mm

Ø

Glide

Profileheight

Profile type


Max. internal carcase height


382 - 460 mm 800 mm461 - 1,500 mm 2,000 mm


382 - 460 mm 1,000 mm461 - 1,600 mm 2,000 mm

24 mm Double-walled

382 - 460 mm 1,000 mm461 - 1,800 mm 2,000 mm


382 - 460 mm 1,000 mm461 - 2,000 mm 2,000 mm

34 mm Double-walled

382 - 460 mm 1,000 mm461 - 2,000 mm 2,000 mm

Internal carcase height

18 24 24/Double-walled

34 34/Double-walled

300 mm 85 85 105 – –500 mm 100 100 120 – –750 mm 120 120 120 – –

1,000 mm 120 140 140 135 1351,250 mm 140 140 140 150 1551,500 mm 160 160 160 160 1551,750 mm – 165 160 170 1752,000 mm – 175 175 185 180

Profile height mm/profile type

FF 8.265

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫



Installation instructions

The tension of the spring loaded shaft may lift the roller shutter up

slightly in closed position. For this reason we recommend using

version C always in combination with a lock.

Packing: 1 pc.

Order reference

When ordering, please specify additionally to catalogue number:

• Internal carcase width

• Internal carcase height

• When ordering powder coated finish: RAL colour

• Number of roller shutters

• Lock, handle or inset handle

⌫ ⌫ ⌫

Spring loaded shaft

Front panel

Half roll Ø+10 mm

⌦ Ø

Half roll Ø +10 mm

⌦ Ø

Height A dependingon roll Ø 125, 150, 175or 200 mm

⌦ Ø

Guide track

Tracks to be drilled with countersinking on

For Internal carcase width min. 1,000 mm

For internal carcase width max.1,000 mm

Guide tracks with plastic insersion facility


Finish/Colour⌫

Profile height

Profile type

Cat. No.



442.72.900

24 mm – 442.72.91024 mm Groove design

442.72.950

24 mm Double-walled

442.72.920


442.72.940

Ground, stainless steel coloured anodized⌫

18 mm – 442.72.00024 mm 442.72.01024 mm Double-walled

442.72.020


442.72.040

Powder coated in RAL colours⌫


442.72.650

24 mm Double-walled

442.72.620


442.72.640

⌦⌦⌫⌫


FF 8.266

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


Roller shutters, with guide profile

E

D

F

A

C

G

B

Cat. No.

A Tambour door slats

442.20.920

Cat. No.

B Lock strip

442.26.920

Cat. No.

C Front panel

442.28.970

Cat. No.

D Connecting handle profile

442.27.910

Cat. No.

E Lock strip guide

442.26.990

Packing: 1 pc.

Packing: 1 pc.

Packing: 2.3 m

Packing: 2.5 m

Packing: 1 or 10 pcs.

Application: Outside mounting

Cat. No.

Cotton adhesive tape for glue fixing

442.01.070


• Finish: Silver coloured

• Runnig direction: Vertical or horizontal

• Max. carcase dimensions:

Vertical: Heigth 1,600 mm, width 800 mm

Horizontal: Heigth 1,200 mm, width 1,600 mm

• Mounting: For screw fixing or press into groove

Packing: 10 m

⌫ ⌫

24.07.2009

FF 8.267

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


Roller shutters, guides for outside mounting

Roller shutters, guides for groove mounting

Cat. No.

F 90° curve guide track °

442.23.900

Packing: 1 pc.

Packing: 1 pc.

Cat. No.

G Guide track

442.29.950

Version

Cat. No.

Left large snail

442.57.921

Right large snail

442.57.922

Cat. No.

Centre stopper

442.56.992

Cat. No.

Track for groove

442.54.901

Cat. No.

90° bend track for groove °

442.55.901

Packing: 1 pc.

Packing: 1 pair

Packing: 2.3 m

Packing: 1 pair

Right snail

Left snail

FF 8.268

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

TH F

urni

ture

Fitt

ing

2008

).

⌫

⌫

⌫


For handles

Drilling for

Cat. No.

1 Handle, central⌦

442.70.090

2 Handles, off-centre⌫⌦

442.70.091

Order reference

Order handles separately and fit yourself.


• Cat. No. handles

• Hole spacing (in combination with cam locks, specify position

of handle and lock)

• With 2 handles: Spacing

⌫ ⌫

⌫

For locks

Drilling and milling for

Cat. No.

1 Cam lock with hook cam, central ⌫ ⌦

442.70.093

Order reference

Order rim locks and cam locks separately.


• Cat. No. of rim lock or cam lock

• Running direction (vertical or horizontal)

Cylinders also available for locking systems

⌫

Drilling and milling for

Cat. No.

1 Cam lock with hook cam, central, incl. spacer or1 Rim lock, central, incl. spacer ⌫⌦ ⌦

442.70.094

Only for cam locks with hook cam:

⌫Cat. No. 235.88.xxxCat. No. 235.74.xxxCat. No. 235.91.xxx

Only for cam locks with hook cam or rim locks incl. spacer:Cam lock with hook cam; cat. No. 232.07.xxxRim lock incl. spacer; Cat. No. 232.30.xxx

• Only for: Inset handle Cat. No. 158.42.921

Preparation (drilling, milling) of the lock strip⌫ For inset handles

Milling and fitting for

Cat. No.

1 Inset handle, central⌦

442.70.095

2 Inset handles, off-centre⌫⌦

442.70.092

Order reference


• Hole spacing (in combination with cam locks, specify position

of inset handle and lock)

• With 2 inset handles: Spacing

⌫ ⌫

⌫

⌫ ⌫ ⌧⌧⌧ ⌧⌧⌧

FF 8.269

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


Packing: 1 pc.

Radio remote control

⌫• For roller shutter motor drive

Packing: 1 pc.

⌫ ⌫

Roller shutter motor drive

Accessories for roller shutters made of aluminium⌫

• Area of application: For roller shutters made of aluminium

• For carcase width: From 600 mm

• Connection: 230 V/50 HZ

• Version: Pre-assembled with shaft, incl. white push button

Cat. No.

Radio remote control⌫

442.70.097

Max. carcase width

Cat. No.

Max. 600 mm 442.70.096

FF 8.270

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


The length of the elastic ropes is adjusted using the clamping

element with threaded pin and controls the pull force of the

counterbalancing mechanism.

⌦⌫⌦

• For shutter width: Max. 1,000 mm

• For shutter length: Max. 1,800 mm

• Material: Elastic rubber rope, plastic clamping element,steel

threaded pin

• Finish: White clamping element, black threaded pin

• Particularly suitable for narrow, tall cabinets as only small

space is required

⌦ ⌫ ⌫ ⌦ ⌫ ⌫ ⌫ ⌫⌫

For plastic or wooden roller shutters with vertical running direction For roller shutter weight of max. 5 kg

Installation

Clamping element

⌦

Centre shutters

Threaded bolt

⌫

Elastic rope

Elastic rope

Supplied with

2 Elastic ropes Ø 3 mm or 5 mm

2 Clamping elements

2 Threaded pins

1 Set of fixing material

1 Set of installation instructions

Ø ⌦ ⌫

For max. shutter width

For max. shutter length

For max.weight

Elasticrope Ø ø

Cat. No.

600 mm 1,800 mm 3 kg 3 mm 442.08.9001,000 mm 1,800 mm 5 kg 5 mm 442.08.920

Packing: 1 set

FF 8.271

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


• Mounting position depends on shutter size. Please observe

mounting instructions.

• Cables must be mounted in the centre of the bottom edge.

⌦

⌫⌦

• For shutter width: 216 mm – 1,000 mm


• Material: Steel fitting and cable, plastic rollers with spring

• Finish: Fitting galvanized, side roller black

• Cable length: 1,600 mm

⌫ ⌫ ⌫

Counterbalancing mechanism for roller shutters with vertical running direction For roller shutter weight of max. 6 kg

Installation

Supplied with

1 Pair of rollers with spring

2 Cables with fastening eyes



⌦ Cable length

Cat. No.

1,600 mm 442.09.903Packing: 1 set

FF 8.272

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫



• Material: Aluminium spring loaded shaft, steel spring and screw-on

bearing, plastic cable, lateral end caps, deflection roller,

deflection and cable suspension

• Finish: Galvanized screw-on bearing

⌫ ⌦

⌦ ⌫

⌫ ⌦ ⌫

For roller shutter weight max. 7 kg or max. 10 kg

Installation

Supplied with

1 Spring loaded shaft with internal spring and cable, lateral end caps

and screw-on bearings

1 Deflection roller with screw-on bearing

1 Deflection

2 Cable suspensions (1 for plastic or wooden and 1 for aluminium

roller shutter)


⌦ ⌦ ⌫ ⌫

Intermediate shelf centre

() with internalcarcase height1,600 - 2,100 mm

Deflection

Cable

Joints

Cable suspension

⌫

x = position ofdeflection

⌧

• Ready for use installation on intermediate shelf possible

• Screw cable suspension to last profile above the handle.

⌫ ⌫⌫

x = Height (H) _ Depth (T)

⌧ ⌦

For max. internalcarcaseheight

For max. shutter weight

Cat. No.

1,600 mm 7 kg 442.08.9412,100 mm 10 kg 442.08.942

Packing: 1 set

FF 8.273

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


Packing: 1 set

x = Height (H) _ Depth (T)

⌧ ⌦

• Independent mounting of spring loaded shaft and deflection allow

different roller shutter guiding (e.g. with different height positions)

• No intermediate shelf for installation necessary

• Screw cable suspension to last profile above the handle

⌫ ⌫

⌫⌫

x = position ofdeflection

⌧

Cable suspension

⌫

Cable

⌦ ⌫ ⌫

Supplied with

1 Spring loaded shaft with internal spring and axle

1 Cable

1 Deflection roller with screw-on bearing

1 Deflection

2 Cable suspensions (1 for plastic or wooden and 1 for aluminium

roller shutter)


Installation

For roller shutter weight of max. 10 kg

⌫ ⌦ ⌦ ⌫

⌫ ⌫

• Material: Aluminium spring loaded shaft, steel spring and axle,

plastic deflection roller, deflection, screw-on bearing and cable

suspension

• Finish: Galvanized axle

Carcase width mm

Shutter length1,600 mm 2,100 mm

350 – 400 mm 442.08.961 442.08.962400 – 600 mm 442.08.963 442.08.964600 – 800 mm 442.08.965 442.08.966800 – 1,000 mm 442.08.967 442.08.9681,000 – 1,200 mm 442.08.969 442.08.970

Deflection

Joints

FF 8.274

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


Packing: 1 set

Ordering Notice

The counterbalancing mechanism is pre-manufactured according to

order specifications. When ordering, please specify additionally to

catalogue number:

• Shutter width

• Shutter length

• Shutter material

⌦ ⌦⌦

Supplied with

1 Pull element: Chain and cable

2 Deflection rollers with screw-on bearing



Installation

For roller shutters opening downwards and upwards

⌦

⌦ ⌦ ⌫ ⌦ ⌫

• Area of application: Particularly suitable for roller shutters opening

downwards

• Function: Independent operation of two roller shutters running in

two directions


• Material: Plastic deflection roller, steel screw-on bearing

• Finish: Galvanized screw-on bearing

Shutter length

Cat. No.

Max. 1,800 mm 442.08.990

⌫⌫ ⌫⌫

FF 8.275

8


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e (H

THFu

rnitu

re F

ittin

g 20

08).

⌫

⌫

⌫


Packing: 1 set

⌦⌦ ⌦

Supplied with

2 Deflection rollers with screw-on bearing

2 Cables

2 Mounting brackets



Installation

For synchonized opening of two shutters

⌫

⌦⌫ ⌦

⌦ ⌫ ⌦ ⌫



• Material: Aluminium mounting brackets, steel rope and screw-on

bearing, plastic deflection roller

• Finish: Galvanized screw-on bearing and rope

For shutter width

Cat. No.

Max. 600 mm 442.08.981

Max. 900 mm 442.08.982

Max. 1,200 mm 442.08.983

For roller shutters with vertical or horizontal running direction

Centre roller shutter

⌦

hth products catalogue ff2008!08!240 275

Documents