http www.taigtools.com mmill.html

TAIG TOOLS

Made in the U.S A.

Manufacturing desktop milling

machines and lathes for over 30

years.

Home of the Micro

Lathe, Micro Mill, and

CNC Mill plus a

complete line of parts

and accessories.

We provide personal attention to

your questions. Please contact us at:

Fax - 480.895.9648

[email protected]

PHONE - 480.895.6978

Home

Micro Mill

Micro Lathe

CNC Mill

Accessories

Dealers

Applications

Starter

Suggestions

Metal

Working

Links

MICRO MILL

X-Axis Hard Anodized Table with tapered Gib and Y-axis with square Steel ways

Hardened ER16 Spindle in Mill Head for superior accuracy

Z-Axis Slide with tapered Gib and Steel Box Ways

The Micro Mill is a very rigid and precise machine that uses some of the most advanced

techniques compared to its competitors. The Y-axis and Z-axis are supported on 2 1/2 inch

square steel tubing to provide a very solid feel. The leadscrews are all 1/2-20 unlike a lot of

machines of similar size that use 1/4 inch leadscrews. TAIG prefers to provide added

mechanical features to allow the mill to be more useful without raising the price. Being an

aerospace manufacturer for over 18 years our machinists know the importance of table back-

lash compensation and full gib adjustments for wear as employed in the manufacture of the

Micro Mill. Basically, the Micro Mill was designed by machinists and built by machinists.

Overall working accuracy should exceed .0005 in. All machines are sold with a 14 day refund

and a full 2 year factory warranty on all Mill components and accessories.

The Micro Mill has effortless, chatterless, table and millhead movement due to the unique

design of oversized gibs, ground 'Y' axis steel ways, and a massive carriage assembly. The

ground steel ways on the vertical mill head support provides a very rigid Z-axis and makes the

Micro Mill ready for CNC upgrade if you desire. Our small Mill is really a scaled down

version of a big Mill with manual operation.

This is the machine you don't have to baby. The Micro Mill is a rugged precision instrument

that has plenty of rigidity. It has a life-time ball bearing spindle, coupled with a six speed

positive vee belt drive. Spindle speeds in geometric progression from 525-5200 RPM (CR

version 1000 - 10000 rpm) provide the power to "HOG" 1/8 inch cuts in mild steel or the

speed and precision to "dust" a few tenths (compare that to other mills of similar size on the

market, you can't!).

Other big Mill features include large .001 inch graduations on friction adjustable micrometer

dials for the X,Y,& Z axis. Adjustable gibs provide full compensation for X,Y & Z axis wear.

The spindle head column can rotate from 0 to 180 degrees to provide for special machining

tasks. All this adds up to a BEST VALUE in small Mills.

Should there be any questions regarding specific uses of the Micro Mill please feel free to

call, write, email, or visit our facility.

Page 1 of 5Taig Tools - Desktop Milling Machines and Lathes.

4/8/2558http://www.taigtools.com/mmill.html

Micro Mill shown with Vise (way-

covers included but not shown)Computer Ready (CR) Micro Mill

SPECIFICATIONS

GENERAL

Height 21-3/8 in (manual) 26-3/8 in (CNC)

Width 17 in (manual) 22 in (CNC)

Depth 16-3/4 in (manual) 21 in (CNC)

Weight 65 lbs (manual) 85 lbs (CNC)

Maximum bearing runout 0.0004 in.

X axis dovetails 45 deg.

Y axis dovetails 90 deg.

Z axis steel box ways

1/2"-20 leadscrews on X,Y,& Z

All lead screw drives have friction adjustable micrometer dials in .001 inch increments

Pulley type std. 5/8 in. bore multi-step vee belt.

Construction - Steel, hard anodized aluminum on all moving components, adjustable

brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

CAPACITY

Travel in X axis 9.5 in. (Model 2018)

Travel in X axis 12 in. (Model 2019)

Travel in Y axis 5.5 in

Travel in Z axis 6.0 in

Table dimensions 3 1/2 x 15 1/2 inches (Model 2018)

Table dimensions 3 1/2 x 18.4 inches (Model 2019)

Maximum Z-distance to table 9.0 in

Z-Axis swivel 90 degrees

6 spindle speeds 525-5200 RPM

6 spindle speeds 1000-10000 RPM (CR mill)

Z axis column rotation up to 180 degrees

Spindle head rotation 90 degrees



SPINDLE (ER16 SPINDLE)

Spindle Runout less than .0003 Max spindle speed 10000 RPM Sealed precision ball bearing Bearing OD 1.5748 in., ID 0.6692 in. Spindle nose 22mm X 1.5mm Spindle hole 0.406 in.

Spindle ID taper 8 deg (16 deg included) Max. collet diameter 3/8 in. Pulley size 5/8 in. bore. Ball Bearings in all leadscrew bearing blocks

MANUAL MILL PRICES ( Does not include shipping, see below)

2018ER Micro Mill factory assembled (3 1/2 x 15 3/4 inch table and 9 inches of travel in 'X' wired up and ready to go, way covers not shown).

$835.40

2019ER Micro Mill factory assembled (3 1/2 x 18 1/2 inch table and 12 inches of travel in 'X')

$970.00

NOTE UPGRADE ANY of the above MANUAL MILLS with a 1/4 hp, continuous duty, 3400 rpm motor. This motor is SUPERIOR to the normal motor and is on all the CNC mills (Motors shown in above pictures):

$125.00

VC-ER Vise, 2.125" opening, 2.00" wide for ER 16 Mill with 3/16" & 3/8" ER16 collets

add 35.00

Manual Mill Upgrades

2018CR-ER

2018 converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system.

$1125.00

2019CR-ER

2019 converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system.

$1211.00

Shipping and Insurance costs

East Coast -------- $90.00 Midwest ----------- $80.00 Northwest --------- $65.00 West Coast -------- $55.00

Check Out Our Complete Line of

Accessories !

Micro Mill Parts Diagram



Micro Mill Parts Pricelist

Part # Price Description Part # Price Description

200-10 42.00 Square Tubing Base 200-35 70.00 X-Axis Table (2018)

200-15 52.50 Y-Axis Extrusion 200-35L 135.00 X-Axis Table (2019)

200-16 12.00 Square Steel Ways (2req) 200-36 3.25 X,Y End Plate (2 req)

200-20 130.00 Y-Axis Saddle with Steel Ways on top

200-40 68.00 Z-Axis Steel Tubing Column

200-21 20.00 X-Axis Tapered Gib 200-41 15.00 Z-Axis End Plate

200-22A 18.75 Y-Axis CNC Leadscrew Nut (LH)

200-42 15.00 Z-Axis 3" Steel Box Way

200-43 16.00 Z-Axis 1 1/4" Steel Box Way

200-23A 18.75 200-44 84.00 Z-Axis Main Body



X-Axis CNC Leadscrew Nut

(RH)

200-25 24.00 Y-Axis Leadscrew (LH) 200-48 6.00 Headstock Mounting Plate

200-25A 25.00 Z-Axis Leadscrew (LH) 200-50 12.00 Spindle Motor Mounting Plate

200-26 26.00 X-Axis Leadscrew (RH) 2018 200-51 7.00 Spindle Motor Mounting Post

200-26A 27.00 X-Axis Leadscrew (RH) 2019 200-55 30.00 Spindle Motor (1/5 hp, 1750

rpm)

200-27 5.00 Dial (3 req) 200-55CR 175.00 Spindle Motor (1/4 hp,3400

rpm,Cont.Duty)

200-28 2.00 Dial Sleeve 200-57 7.00 Threaded Rod Draw Bar

200-30 6.25 Dial Handcrank 200-60 124.50 ER Spindle Headstock

200-31 .75 Dial Handle 200-61 25.80 Pulley Set (3/8 , 5/8 & belt)

200-32 .25 Dial Keyway 200-76 13.00 Bearing Block

[Home] [Micro Mill] [Micro Lathe] [CNC Mill] [Accessories]

[Dealers] [Applications] [Starter Suggestions] [Metal Working Links]

TAIG Tools, 12419 E. Nightingale Lane, Chandler AZ 85286.

email - [email protected] or Phone - 480.895.6978

Copyright 2008 TAIG Tools. All rights reserved.

No part of this web site, including text, photos or illustrations may be reproduced

or transmitted for commercial use without written permission from TAIG Tools.



http www.taigtools.com mmill.html

Documents