huawei simulator.pdf
TRANSCRIPT
Current position : All Boards > Network technology > Network technology communion > Open
Now, Huawei eNSP beta testing! Help you to become IP expert!
Reply Post
12
k61335
1#Font Size | Post On 2012-08-08 21:55 | View author only
Open Now, Huawei eNSP beta testing! Help you to become IP expert!
Welcome to download the latest version:http://support.huawei.com/ecommunity/bbs/10143905.html
eNSP (Enterprise Network Simulation Platform) is Huawei's latest, completely free network simulator, which can not only simulate single router & switch device, but also large network.
From Aug16 to Sep15, eNSP beta testing will begin in global public.
Please download following attachments to get eNSP beta version.
Welcome to join and give your suggestions!
Dwnload these 4 .rar files, just extract the fist file(*.part1.rar) to a folder, then install it.
If there aren't WinPcap and Wireshark software on your computer, please install them first.
[ Last edited by k61335 2012-10-19 11:05:51 Edit ]
Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part1.rar ( 23.84 MB ,851
downs )
Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part2.rar ( 23.84 MB ,1011
downs )
Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part3.rar ( 23.84 MB ,953
downs )
Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part4.rar ( 11.33 MB ,1064
downs )
Attaches: WinPcap_4_1_2.zip ( 874.81 KB ,580 downs )
Attaches: wireshark-win32-1.4.3.zip ( 18.32 MB ,508 downs )
Attaches: eNSP_Help.zip ( 11.27 MB ,752 downs )
Favorite 2
Share 0
Dig8
Reply Quote
i00720791
2 #Post On 2012-08-10 19:53 | View author only
Good news, looking forward.
Reply Quote
leandrocarvalho
3 #Post On 2012-08-16 09:23 | View author only
Why I can´t start the device?
Reply Quote
g00211126
4 #Post On 2012-08-17 10:33 | View author only
Could you describe the details about the operations when you encouter this problem?
Reply Quote
hk47jr
5 #Post On 2012-08-17 19:50 | View author only
Hi everyone,
After installing the software successfully, When I use the software, for example, start the router
CLI screen is shown loading the router but my MS windows informs that the application must be
terminated, and stay indefinitely.
I've tried on WindowsXP SP3 and Windows 7 SP1, all 32bits, problem is same.
Can anyone help and solve this problem?
Thank You,
hk47jr
Reply Quote
g00211126
6 #Post On 2012-08-20 11:51 | View author only
Reply 5 #
Can you provide the screenshot when the error occurs?
Reply Quote
hk47jr
7 #Post On 2012-08-20 19:27 | View author only
Hi Sr. g00211126,
Yes I am posting the error, but the messages are in Portuguese, The translation is "The
eNSP_DEVICE.EXE stopped working" and "Look for solution online and close the program" or
"Close Program".
If I close this box after a few seconds it is shown again. Below is the screenshot of the screen
with the detail of the error.
Thank You for your assistance.
HK47jr.
Reply Quote
g00211126
8 #Post On 2012-08-20 22:04 | View author only
Thank you for your feedback,we are trying to solve this problem.
Reply Quote
g00211126
9 #Post On 2012-08-21 21:15 | View author only
Reply 7 #
hi hk47jr
we have made it clear what is the cause of the problem.
you need to open the command line window as administrator,and then input command " lodctr /r
".
this command used to reset the counter in your system.
please contact with me if it still will not work.
[ Last edited by g00211126 2012-08-28 10:25:52 Edit ] Reply Quote
treaki
10 #Post On 2012-08-22 21:37 | View author only
Hi,
is it possible that your eNSP simulation utility dosnt work on windows 7 x64-bit systems??
ive got the same problem as hk47jr
i am sending a screenshot with the error (in german) and Visual studio in the background with
was started in debug mode because the crash of eNSP:Device.exe...
i guess that is because i am using the 64-bit version of windows 7 but i have no possibilitys to
test it with an 32-bit version right now. please check that and inform me.
eNSP seams to become a good tool whats remainds me on cisco pacet tracer but with the
possibility of connecting a real network interface and sending real packages it could become
much powerful.
Please fix the error end add some nice features like
- DHCP client at virtual computers
- automatic arp resolv of mac addresses
- simulated web server and clients (just as much as packet tracer)
greetings treaki
Attaches: 120822_eNSP_not_working.png ( 336.48 KB ,14 downs )
Reply Quote
treaki
11 #Post On 2012-08-22 21:41 | View author only
congratulation, the huawei forum is sizing the picture down to much, you can find the full sized
picture here:
http://treaki.tk/~treaki/120822_eNSP_not_working.png
––––
[ Last edited by treaki 2012-08-22 21:44:09 Edit ] Reply Quote
hk47jr
12 #Post On 2012-08-23 03:43 | View author only
Reply 9 #
Hi Sr. g00211126,
I would like to tell good news, but I'm not have, the test did not work.
Do you have other solution ?
I wait for instructions for test.
Thank You, Regards
Hk47jr
Reply Quote
g00211126
13 #Post On 2012-08-23 10:03 | View author only
Reply 12 #
please note the red marked part.
some other people in china, solve the problem by this solution.
Reply Quote
g00211126
14 #Post On 2012-08-23 10:13 | View author only
Quote 13 #
hi treaki,
it does not matter with 64-bit version of windows 7.
please refer to following configure.
please note the red marked part.
some other people in china, solve the problem by this solution.
g00211126 Post On 2012-08-23 10:03:25
Reply Quote
schwallpm
15 #Post On 2012-08-23 15:37 | View author only
Hi!
It finally worked for me with the same error: the thing is that you have to type the command
several times (4 times for me) from the moment of starting your device (I close the pop up
window everytime it appears, don't know if it really helps, but it works).
Reply Quote
g00729363
16 #Post On 2012-08-23 16:11 | View author only
Current AR1220 doesn't seem to support lldp.
Reply Quote
g00211126
17 #Post On 2012-08-23 16:29 | View author only
Reply 16 #
hi g00729363,
i'm sorry, ar1220 does not support LLDP currently.
we will record this defect.
thank you for your feedback.
Reply Quote
g00211126
18 #Post On 2012-08-23 16:38 | View author only
Reply 15 #
technically,you just need to type the command once.
maybe you need to close the eNSP first, and then type the command in the command line
window as administrator.
at last, restart the eNSP.
Reply Quote
d00730465
19 #Post On 2012-08-24 02:32 | View author only
Hello! Very Good tool.
Can we share this tool with Customer?
Thank you and regards,
Reply Quote
hk47jr
20 #Post On 2012-08-24 04:18 | View author only
Reply 13 #
Hi Sr. g00211126,
I type command and I received same result of windows, like your red marked.
I think the problem should be a set of factors such as dll version or version of winpcap or
language or so.
Type the command " lodctr /r " before, during or after the eNSP I had the same problem.
In windows 7 environment presents this message of successfully, the environment windowsXP I
received another the message, but the problem is the same, continues to request the closure of the
program.
I know it may seem impossible, because in your environment is working, but see that the
problem is occurring with several users (in different languages of windows).
I am available to help you in testing and remedy the problem.
I'm sure that this tool will bring up the expected benefits surpassing all and any competition.
I await your return on this case.
thank you
Reply Quote
k61335
21 #Post On 2012-08-24 14:16 | View author only
Reply 19 #
Yes, eNSP is open to everyone.
Reply Quote
laporte
22 #Post On 2012-08-24 22:36 | View author only
Quote 20 #
Hello..I have same problem...please help...
Hi Sr. g00211126,
I type command and I received same result of windows, like your red marked.
I think the problem should be a set of factors such as dll version or version of winpcap or
language or so.
Type the command " lodctr /r " before, during or after the eNSP I had the same problem.
In windows 7 environment presents this message of successfully, the environment windowsXP I
received another the message, but the problem is the same, continues to request the closure of the
program.
I know it may seem impossible, because in your environment is working, but see that the
problem is occurring with several users (in different languages of windows).
I am available to help you in testing and remedy the problem.
I'm sure that this tool will bring up the expected benefits surpassing all and any competition.
I await your return on this case.
thank you
hk47jr Post On 2012-08-24 04:18:55
Reply Quote
g00211126
23 #Post On 2012-08-25 17:42 | View author only
Reply 22 #
please type the command "lodctr /r:PerfStringBackup.ini",if your environment is windows xp
Reply Quote
i00720791
24 #Post On 2012-08-26 01:38 | View author only
example topologies after install are unpacked into chinese-named folders, also the .topo files use
chinese letters.
please, use english in the future releases.
Reply Quote
i00720791
25 #Post On 2012-08-26 01:39 | View author only
.topo files should be mapped in registry to be opened with the eNSP program.
Reply Quote
laporte
26 #Post On 2012-08-26 05:26 | View author only
Reply 23 #
my operating system is windows 7 64 bit:((
Reply Quote
mbeain
27 #Post On 2012-08-26 08:49 | View author only
Very goog job
This simulator will be very usefulll for me because I work as an Networking Instructor her in
Chile.
I run it on Windows Vista and I works perfect.
In Windoes 7 64 bit the software craches. The same problem of other people in this forum. Until
now I have not enter the command suggested.
I also installed it on Win XP SP3 virtual machine and the program run well but I can´t launch
Wireshark when I start a packet capture.
I have been searching for the Wireshark path in the e NSP but with no success. Any ideas???
Mauricio Beain
HCDA
Reply Quote
g00211126
28 #Post On 2012-08-27 09:32 | View author only
Quote 27 #
hi, mbeain
1、you need to install wireshark in you virtual machine,we did not take it in the eNSP.
2、i am so sorry, we have not found the reason which crashes in the windows 7 64bit
environment.
Very goog job
This simulator will be very usefulll for me because I work as an Networking Instructor her in
Chile.
I run it on Windows Vista and I works perfect.
In Windoes 7 64 bit the software craches. The same problem of other people in this forum. Until
now I have not enter the command suggested.
I also installed it on Win XP SP3 virtual machine and the program run well but I can´t launch
Wireshark when I start a packet capture.
I have been searching for the Wireshark path in the e NSP but with no success. Any ideas???
Mauricio Beain
HCDA
mbeain Post On 2012-08-26 08:49:43
Reply Quote
mbeain
29 #Post On 2012-08-27 11:09 | View author only
Of course, Wireshark is installed in the Virtual machine itself. I reinstalled it, and also reinstalled
eNSP but in the virtual machine, when I start a capture, wirechark is not launched. It is a
Windows XP SP3 virtual machine. Very strange.
Thanks.
Reply Quote
a00747456
30 #Post On 2012-08-28 17:37 | View author only
Any plan to add more routers and switches to the platform? I mean new type of routers (8090)
and switches (s9300).
Reply Quote
g00211126
31 #Post On 2012-08-29 09:28 | View author only
Reply 30 #
sorry, i do not have the specific roadmap of planning.
Reply Quote
Juancar8
32 #Post On 2012-08-30 17:36 | View author only
Hi,
I have the same problem with eNSP that other people. I start the program but windows says there is a problem an the program will close.
I've try the solution loctdr /r, and it works parcially, because i have to do it at the same time that the router is starting, and i have to do the same with every router in the topology.
Do you have a total solution for this issue? I know is a beta simulator, but i think this is a big bug!
Any way, congratulations for eNSP!, i was waiting for it!
Reply Quote
x00726316
33 #Post On 2012-08-31 11:54 | View author only
why we can not use display mac-address to check mac-table?
Reply Quote
Juancar8
34 #Post On 2012-08-31 15:08 | View author only
i wonder how people can use eNSP, all my collegues have the same problem as me. when i start
the program windows says that the program has a problem and will close.
the solution lodctr /r only works sometimes and i have to type all the time the same command in cmd for every router in the topology.
anybody using windows 7 can run the simulator without any problem?
Reply Quote
g00211126
35 #Post On 2012-08-31 15:18 | View author only
Quote 33 #
you should type the command in the user mode.please check it.
why we can not use display mac-address to check mac-table? x00726316 Post On 2012-08-31 11:54:01
Reply Quote
r00700062
36 #Post On 2012-08-31 16:23 | View author only
S5700 switch
After inputing command "traffic-statistic inbound acl name test1" program crashing.
Reply Quote
laporte
37 #Post On 2012-09-02 07:11 | View author only
I did all your suggestions and everything wroten in this site..but I cant work ensp:(( I tried on
windows 7 and also vista but its not working.what s wrong I dont understand..
Reply Quote
Juancar8
38 #Post On 2012-09-03 23:54 | View author only
Last news from huawei support is "we are working very hard to fix the program crashing issue"
I have the same problem, when i start the program windows says "the program will close" etc,
but i wonder how people can run the program without any problem beacuse they are asking
about some features or some commands. it's seem that ther problem only occur in certains
windows stations, i don't know.
We are waiting for the solution in order to try the simulator, because now a days i can't start the
devices.
Reply Quote
g00211126
39 #Post On 2012-09-04 14:26 | View author only
Quote 36 #
hi, we have resolved the problem in the next version.
S5700 switch
After inputing command "traffic-statistic inbound acl name test1" program crashing.
r00700062 Post On 2012-08-31 16:23:10
Reply Quote
x00726316
40 #Post On 2012-09-05 18:10 | View author only
引用 35 楼
you should type the command in the user mode.please check it.
g00211126 发表于 2012-08-31 15:18:13
what I am asking is after we execute this command, there is no entry listed, actually there should
be.