Cable work must be able to be carried out regardless of the weather and ground conditions. What is needed is a reliable machine that can get through bogs, muddy fields or stony forestland, regardless of the terrain. Safety is important when working with cables, for the driver and anyone working close to the machine.

www.huddig.com facebook.com/huddig youtube.com/huddig

EngineModel Cummins turbocharged diesel engine QSB6.7 Stage III B l Tier 4 InterimPower output 116 kW (157 hp) at 1900 rpm Type Straight 6-cylinder water cooledCylinder volume 6.7 liters l 409 cu inTorque 662 Nm l 488 lb ft at 800 - 1400 rpm

Transmission2-gear hydrostatic gearbox ZF/2HL 290Speed, 1st gear 0-10 km/hr low ratio l 0-6 mph low gearSpeed, 2nd gear 0-42 km/hr high ratio l 0-26 mph high gearThe transmission system is separated from the operating hydraulics.

AxlesZF Automatic differential brake with planetary hub reduction gears

WheelsStandard 620/60x34

Brake systemTransport brakes Servo assisted disc brakes Service brake Automatic engagement of transport brakes when stationary (automatic function can be disengaged)

Steering systemHydrostatic orbitrol control system with dual cylinders in the center pivot. Steering angle ±32° Frame oscillation ±8°

Electrical systemVoltage 24V Batteries 2x12V, 110 Ah Generator output 80A AC Starter motor output 5.8 kW

Hydraulic systemLoad sensing hydraulics with variable axial piston pumps, 60cc l 3.66 cu in + 100cc l 6.10 cu in (stepped-up pump distribution box provides a total of 174cc l 10.62 cu in). Low pressure compressor valves for backfilling and a heating system (circuit pump system) for cold starts. Internal servo supply to directional valve and return power for excavating functions.

The hydraulic system is prepared for environmentally compatible hydraulic oils.

Working pressure 23.3 MPa (233 bar) l 3380 psiNom. max. flow at 1000 rpm 176 l/min l 46 gal/minNom. max. flow at 1500 rpm 264 l/min l 70 gal/minNom. max. flow at 2000 rpm 352 l/min l 93 gal/min

Measurements and weightWidth 2489-2600 mm l 98-102.3 inHeight to cab roof 3110 mm l 122.5 inLength 8630 mm l 329 inWeight excluding buckets 12500 kg l 27557.8 lbs

Y2Y3

45°

Y2Y3

45°

Y2Y3

45°

Specifications with standard buckets and 620/60x34 wheel fittings

A Transport length 8630 mm l 329 inB Wheelbase 2600 mm l 102 inC Backhoe overhang 1100 mm l 43 inD Height above cab 3110 mm l 122 inE Transport height backhoe 4380 mm l 172 inF Transport length backhoe 2300 mm l 91 inG Ground clearance 515 mm l 20 inH Ground clearance angle, support legs 32°I Maximum width support legs 3700 mm l 146 in Width with support legs parked position 2460 mm l 97 inJ Width front bucket 2500 mm l 98 inK Width over wheels 2 489 - 2 600 mm l 98-102 inr1 Swing radius outside bucket 6288 mm l 248 inr2 Swing radius outside wheels 5760 mm l 227 in

BackhoeL Reach 6530 mm l 257 inM Depth 4900 mm l 192 inN Load height 3770 mm l 148 inO Digging width 4200 mm l 165 in

Front loaderP Reach 2630 mm l 104 inQ Lift height leveled bucket 3500 mm l 138 inR Load height 45° tilted bucket 2690 mm l 106 inS Reach 45° tilt angle 1030 mm l 40.5 inT Max. tilt angle 63°U Load angle 40°U1 Load angle in carrying position 46°V Tilt angle ground plane 112°X Excavation depth 90 mm l 3.5 in

LiftY1 Highest point of the basket in transport mode 3 975 - 4 073 mm l 156-185 inY2 Highest point of the arm when folded down 3 570 - 3 873 mm l 140-152 inY3 Highest point of the arm in transport mode 3 840 - 4 003 mm l 151-157 in

www.huddig.comfacebook.com/huddigyoutube.com/huddig

HU

DD

IG C

ABLE

_EN

l US_

2016

03

HUDDIG ABBox 1054824 12 HudiksvallSwedenTel. +46 650 375 00 info@huddig.se