huge auction sauer-danfoss, inc… · chiron fz22w machining center, w/ge fanuc om controller, chip...
TRANSCRIPT
DUE TO PLANT CLOSING
HUGE AUCTIONSAUER-DANFOSS, INC.LARGEST OFFERING OF LATE MODEL CNC EQUIPMENTw/TOOLING & PLANT SUPPORT
MFI, IL Lic. #044.0000271 and David S. Fox, IL Lic. #014.0000996(800) 722-3334 • http://www.michaelfox.com • email: [email protected]
FOR ADDITIONAL INFORMATION CONTACT JENNIFER LESHEM AT (800) 722-3334 Ext. 272OR [email protected]
NORTH AMERICAN OFFICES:
ARIZONA, MARYLAND, MICHIGAN, NEW YORK,
ILLINOIS, FLORIDA, CONNECTICUT, NEBRASKA, WASHINGTON, ONTARIO
ADDITIONAL OFFICES WORLDWIDE
Bid Live Online atwww.michaelfox.com
Bid Live Online atwww.michaelfox.com
TUESDAY,DECEMBER 5(SECOND DAY
IF NECESSARY)AT 9:00 A.M. (CST)
2969 East 3rd Road/Airport Road
LaSalle, Illinois 61301Approximately 90 miles
southwest of Chicago
w/TOOLING & PLANT SUPPORT
<LEBLOND MAKINO A55 HORIZONTAL MACHINING CENTER
NEW
1992
OKUMA LB45II CNC TURNING CENTER
OVER 1500 LOTS
NEW
1997
2 32 3
MAKINO A77 HORIZONTAL MACHINING CENTER
LEBLOND MAKINO MC65 HORIZONTAL MACHINING CENTER
1995 LeBLOND MAKINO MDL. A55 DELTA HORIZONTAL MACHINING CENTER
MAKINO MC-65 HORIZONTAL MACHINING CENTER
MAKINO A55 Delta Horizontal Machining Center, Coolant Through Spindle, 50–15,000 RPM, 40 Taper, 40 ATC, Travels-X-560mm, Y-560mm, Z-560mm, Pallet-400mm x 400mm, Chip Conveyor, w/Makino Professional 3 Fanuc 16MC Controls, LMO-693, 1998, Asset #5404
MAKINO A55 Delta Horizontal Machining Center, Coolant Through Spindle, 50–15,000 RPM, 40 Taper, 40 ATC, Travels-X-560mm, Y-560mm, Z-560mm, Pallet-400mm x 400mm, Chip Conveyor, w/Makino Professional 3 Fanuc 16MC Controls, LMO-695, 1998, Asset #5406
MAKINO A77 Horizontal Machining Center, w/One Degree 4th Axis, Coolant Through Spindle, 50 Taper, 40 ATC, Travels-X-800mm, Y-750mm, Z-770mm, 20–10,000 RPM, Pallet-500mm x 500mm, Pallet Max. Load-1,200kg, w/Makino Professional 3 Controller, Chip Conveyor, Coolant System, 373, 1997, Asset #5247
MAKINO MC-65 Horizontal Machining Center, w/Fanuc Series 15-M Controller, 50 Taper, w/60 Tool Holder Carousel, 12 Position Turret, 10–4,000 RPM, Travels-X-635mm, Y-560mm, Z-510mm, Pallet-500mm x 500mm, Pallet Max. Load 1,000kg, Chip Conveyor, Coolant System, A63-747, 1988, Asset #4853
LeBLOND MAKINO A55 Delta Horizontal Machining Center Coolant Through Spindle, 50–15,000 RPM, 40 Taper ATC, Travels X-560mm, Y-560mm, Z-560mm, Pallet 400mm x 400mm, Chip Conveyor, w/Makino Professional 3 Faunc 16-MB Controls, 1995, S/N LM-450
LEBLOND MAKINO A55 Delta Horizontal Machining Center, Coolant Through Spindle, 50–15,000 RPM, 40 Taper, 40 ATC, Travels-X-560mm, Y-560mm, Z-560mm, Pallet-400mm x 400mm, Chip Conveyor, w/Fanuc Series O-M Controls, LM-103, 1992, Asset #4941
LEBLOND MAKINO A77 Horizontal Machining Center, w/Full 4th Axis Contouring, Coolant Through Spindle, 50 Taper, 40 ATC, Travels-X-800mm, Y-750mm, Z-770mm, 20–10,000 RPM, Pallet-500mm x 500mm, Pallet Max. Load-1200kg, w/Makino Professional 3 Controller, Chip Conveyor, Coolant System, A94-157, 1995, Asset #5052
LEBLOND MAKINO A77 Horizontal Machining Center, w/One Degree 4th Axis, Coolant Through Spindle, 50 Taper, 40 ATC, Travels-X-800mm, Y-750mm, Z-770mm, 20–10,000 RPM, Pallet-500mm x 500mm, Pallet Max. Load-1,200kg, w/Makino Professional 3 Controller, Chip Conveyor, Coolant System, A94-11, 1994, Asset #5029
LEBLOND MAKINO MC-65 Horizontal Machining Center, w/Fanuc 15-M Controls, 50 Taper, w/60 Tool Holder Carousel, 12 Position Turret, 10–4,000 RPM, Travels-X-635mm, Y-560mm, Z-510mm, Pallet-500mm x 500mm, Pallet Max. Load 1,000kg, Chip Conveyor, Coolant System, A93-880, 1993, Asset #4969
LEBLOND MAKINO MC-65 Horizontal Machining Center, w/Fanuc Series 15-M Controller, 50 Taper, w/60 Tool Holder Carousel, 12 Position Turret, 10–4000 RPM, Travels-X-635mm, Y-560mm, Z-510mm, Pallet-500mm x 500mm, Pallet Max. Load 1,000kg, Chip Conveyor, Coolant System, A63-746, 1988, Asset #4852
(2) OKUMA MX45VAE Vertical Machining Centers, w/10" 3-Jaw Chuck, 40 Taper, 20 ATC, 50–7,000 RPM, Travels-X-560mm, Y-460mm, Z-450mm, Table Size-460mm x 760mm, Table Max. Load-350kg, w/Okuma OSP7000M Controller, w/Chip Conveyor System, 9077, 9076, 1998, Asset #5283, 5284
FADAL VMC-15XT Vertical Machining Center, 40 Taper, 20 Tool Mezz, 75–3,750 RPM, Travels-X-20", Y-16", Z-20", Table-16" x 29.5", Table Max. Load-750 Lbs., w/Fadal CNC 88HS Controller, w/Coolant System, 9607911, 1996, Asset #5199
CNC HORIZONTAL & VERTICAL MACHINING CENTERS
MAKINO A55 DELTA HORIZONTAL MACHINING CENTER
1 OF 4
MAKINO A55 DELTA HORIZONTAL MACHINING CENTER
1 OF 4
2 32 3
FADAL VMC-20 VERTICAL MACHINING CENTER
FADAL VMC-15XT VERTICAL MACHINING CENTER CHIRON FZ22W VERTICAL MACHINING CENTERFADAL VMC-40 VERTICAL MACHINING CENTER
OKUMA LB35II CNC TURNING CENTEROKUMA LC20 CNC TURNING CENTER
FADAL VMC-15XT VERTICAL MACHINING CENTER
OKUMA MX45VAE VERTICAL MACHINING CENTER
FADAL VMC-15XT Vertical Machining Center, 40 Taper, 20 Tool Mezz, 75–3,750 RPM, Travels-X-20", Y-16", Z-20", Table-16" x 29.5", Table Max. Load-750 Lbs., w/Fadal CNC 88HS Controller, 9610599, 1996, Asset #5200
FADAL VMC-20 Vertical Machining Center, 40 Taper, 20 Tool Mezz, 75–10,000 RPM, Travels-X-40", Y-20", Z-20", Table-47.94" x 20", Table Max. Load-1,500 Lbs, w/Fadal CNC-88S Controller, Chip Conveyor, Coolant System, 9305343, 1993, Asset #4980
FADAL VMC-20 Vertical Machining Center, 40 Taper, 20 Tool Mezz, 75–10,000 RPM, Travels-X-40", Y-20", Z-20", Table-47.94" x 20", Table Max. Load-1,500 Lbs, w/Fadal CNC-88S Controller, Chip Conveyor, Coolant System, 9305342, 1993, Asset #4981
FADAL VMC-20 Vertical Machining Center, 40 Taper, 20 Tool Mezz, 75–10,000 RPM, Travels-X-40", Y-20", Z-20", Table-47.94" x 20", Table Max. Load-1,500 Lbs, w/Fadal CNC-88 Controller, Coolant System, 9209622, 1992, Asset #4952
FADAL VMC-40 Vertical Machining Center, 40 Taper, 20 Tool Mezz, 75–10,000 RPM, Travels-X-40", Y-20", Z-20", Table-47.94" x 20", Table Max. Load-1,500 Lbs. w/Fadal CNC 88HS Controller, Chip Conveyor, Coolant System, 9406355, 1994, Asset #5038
FADAL VMC-40 Vertical Machining Center, 40 Taper, 20 Tool Mezz, 75–10,000 RPM, Travels-X-40", Y-20", Z-20", Table-47.94" x 20", Table Max. Load-1,500 Lbs., w/Fadal CNC 88HS Controller, 9043848, 1994, Asset #5016
(2) BOSTOMATIC 14-40 Milling Machines, Four Spindle w/Control Panels, MB-246, MB-13965, 1979, 1977, Asset #3245 & 3130
CHIRON FZ22W Machining Center, w/GE Fanuc OM Controller, Chip Conveyor, Coolant System, 170-70, 1989, Asset #4846
OKUMA MC4-VA Machining Center, 40 Taper, 20 Tool Holder, 60–4,000 RPM, Travels-X-650mm, Y-410mm, Z-450mm, Table Size-1000mm x 410mm, Table Max. Load-500kg, w/Okuma OSP 5000M-G Controller, w/Chip Conveyor, Coolant System, 657, 1986, Asset #3405
OKUMA MC4-VA Machining Center, 40 Taper, 20 Tool Holder, 60–4,000 RPM, Travels-X-650mm, Y-410mm, Z-450mm, Table Size-1,000mm x 410mm, Table Max. Load-500kg, w/Okuma OSP 5000M-G Controller, w/Chip Conveyor, Coolant System, 656, 1986, Asset #3404
OKUMA MC4-VA Machining Center, 40 Taper, 20 Tool Holder, 60–4,000 RPM, Travels-X-650mm, Y-410mm, Z-450mm, Table Size-1,000mm x 410mm, Table Max. Load-500kg, w/Okuma OSP 5000M-G Controller, w/Chip Conveyor, Coolant System, 324, 1985, Asset #3394
OKUMA MC-50H Machining Center, w/Okuma OSP 5000M Controls, w/Coolant System, 50 Tool Holder Carousel, PC02-050TRF, 1984, Asset #3389
CNC TURNING CENTERSOKUMA LB35II CNC Turning Center, w/12" 3-Jaw Chuck, 14 x 3,200 RPM, Travels-X-330mm, Z-920mm, 12 Tool Holder, Max. Turning-460mm x 600mm, w/Okuma OSP 7000L Controller, w/Chip Conveyor System, Safety Gate, 09070462, 1997, Asset #5277
OKUMA LC20 CNC Turning Center, 4-Axis Similturn, 75–4,200 RPM, Travels-X-160mm, Z-520mm, 12 Tool Holder, Max. Turning-300mm x 250mm, w/Okuma OSP 5000L-G Controller, 3,500 RPM, Chip Conveyor, 6310-4142, 1988, Asset #4836
SOME ITEMS WILL BE AVAILABLE FOR ONLINE NEGOTIATED SALE
PRIOR TO FINAL AUCTION DATES.CHECK OUR WEBSITE DAILY
FOR NEW ITEMS AND AVAILABILITY.
CNC HORIZONTAL & VERTICAL MACHINING CENTERS, cont.
4 5
MORI SEIKI SL-25B5 CNC LATHE
OKUMA LB35II CNC TURNING CENTER
MORI SEIKI AL-2BTM CNC LATHE
OKUMA LB45II CNC TURNING CENTER
OKUMA CROWN LI060 CNC LATHE
MAHO MH800E CNC UNIVERSAL MILLER
CNC TURNING CENTERS, continued
OKUMA LC20 CNC Turning Center, 4-Axis Similturn, 75–4,200 RPM, Travels-X-160mm, Z-520mm, 12 Tool Holder, Max. Turning-300mm x 250mm, w/Okuma OSP 5000L-G Controller, 3,500 RPM, Chip Conveyor, 6310-4144, 1988, Asset #4837
(4) OKUMA LB35II CNC Turning Centers, w/12" 3-Jaw Chuck, 14 x 3,200 RPM, Travels-X-330mm, Z-920mm, 12 Tool Holder, Max. Turning-460mm x 600mm, w/Okuma OSP 7000L Controller, w/Chip Conveyor System, Safety Gate, 09070461, 09070465, 09070464, 1006-0555, 1997, Asset #5276, 5279, 5278, 5395
(6) OKUMA LB45II CNC Turning Centers, 12 x 2,800 RPM, Travels-X-440mm, Z-1,060mm, Max. Turning-660mm x 750mm, w/Okuma OSP 7000L Controls, 12 Position Turret, Chip Conveyor, Coolant System, 214, 157, 202, 242, 243, 223, 1997, Asset #5467, 5466, 5603, 5470, 5469, 5468
WARNER SWASEY 2SC CNC Turning Center, Lot-W/S 855, w/Hydraulic 12" 3-Jaw Chuck, 3" Bore, Spindle Speeds Low-47 to 687, High-134 to 2010, 12 Tool Holder, Max. Turning-8" x 7", w/W/S Controller, w/Chip Conveyor, 2873821, 1993, Asset #4978
WARNER SWASEY 2SC CNC Turning Center, Lot-W/S 821, w/Hydraulic 12" 3-Jaw Chuck, 3" Bore, Spindle Speeds Low-47 to 687, High-134 to 2010, 12 Tool Holder, Max. Turning-8" x 7", w/W/S Controller, w/Chip Conveyor, 2852698, 1993, Asset #4979
WARNER SWASEY M-5060/2SC CNC Turning Machine, w/Lot #857, w/Chip Conveyor, Allen Bradley 8400 LP Control Panel, 3023238, 1980, Asset #3281
CNC LATHESMORI SEIKI SL-25B5 CNC Lathe, w/10" 3-Jaw Chuck, 40–3,500 RPM, 8 Tool Holder, Max. Turning-250mm x 500mm, w/Fanuc 10-T Controller, Chip Conveyor, 620, 1994, Asset #5017
MORI SEIKI SL-25B5 CNC Lathe, w/10" 3-Jaw Chuck, 40–3,500 RPM, 8 Tool Holder, Max. Turning-250mm x 500mm, w/Yasnac Controller, Chip Conveyor, 2822, Asset #4953
MORI SEIKI CL25A CNC Lathe, 12" 2-Jaw Chuck, 30–3,000 RPM, Travels-X-220mm, Z-500mm, 10 Tool Holder, Max. Turning-370mm x 450mm, w/Chip Conveyor, Yasnac Controls, 148, 1994, Asset #5035
(2) MORI SEIKI AL-2BTM CNC Lathes, w/10" 3-Jaw Chuck, 40–3,500 RPM, 8 Tool Holder, Max. Turning-250mm x 500mm, w/Fanuc 10-T Controller, Chip Conveyor,, 1458, 125, 1993, Asset #4967, #4968
(2) OKUMA Crown LI060 CNC Lathes, 75–4,200 RPM, Travels-X-185mm, Z-520mm, 12 Tool Holder, Max. Turning-270mm, w/Okuma OSP-UIOL Controller, Chip Conveyor, 1662, 11111657, 1999, Asset #5601, 5602
(3) OKUMA LC20 CNC Lathes, w/10" 3-Jaw Chuck, 75-4,200 RPM, Travels-X-160mm, Z-520mm, 12 Tool Holder, Max. Turning-300mm x 250mm, w/Okuma OSP 5000L-G Controller, Chip Conveyor, 3369, 2759, 3402, 1986 & 1995, Asset #3406, 3393, 3407
CNC MILLER/BORING MILLSMAHO MH800E CNC Universal Miller, w/24" x 44", 82165, Asset #4850
BARNES Boring Machine, w/Hydraulic Pump, 3056, 1973, Asset #2946
EX-CELL-O 711 Boring Machine, Precision Single End, 7110003, Asset #381
EX-CELL-O 1212 Horiz. Boring Machine, 2469, 1965, Asset #238
EX-CELL-O DB1212B Horiz. Boring Machine, 21140, 1997, Asset #52499
(2) EX-CELL-O 1212A Horiz. Boring Mills, 2396, 20432, 1977, 1966, Asset #3058, 2426
HEALD SM4-18-RF Boring Mill, 68-8910, 2001, Asset #2964
OLOFSSON 21 Horiz. Boring Mill, w/Hydraulic Pump, 11682, 1970, Asset #2437
STARBORE 672535 Boring Mill, w/Chip Conveyor System, Filter System, Asset #3165
4 5
BRIDGEPORT VERTICAL MILL CHRISTEN 2-32 DRILL GRINDER SUNNEN MBB-1660 PRECISION HONING MACHINE
BRYANT 1116 GRINDERDOALL D1030-14 SURFACE GRINDER DOALL D618-7 SURFACE GRINDER
MATTISON 42 ROTARY SURFACE GRINDER MATTISON 42 ROTARY SURFACE GRINDER MATTISON 42 ROTARY SURFACE GRINDER
GRINDERSBLANCHARD 20 Rotary Surface Grinder, 36" Table, Coolant System, 11600, Asset #494DoALL D1030-14 Surface Grinder, w/30 1/2" x 10 1/2" Electric Magnetic Chuck, 440 Volts, 3 Phase, 230-66 126, Asset #1142DoALL D618-7 Surface Grinder, w/18" x 6" Electric Magnetic Chuck, 440 Volts, 3 Phase, 219-66 306, Asset #1045HARIG Super 612 Surface Grinder, w/12" x 6" Magnetic Chuck, Asset #1682MATTISON Rotary Surface Grinder, 42" Table, w/Hydraulic Pump, Coolant System, Asset #1515MATTISON 42 Rotary Surface Grinder, 42" Table, Hydraulic Pump, Control Panels, 24-649, 1977, Asset #3115MATTISON 42 Rotary Surface Grinder, 42" Table, Coolant System, Control Panels, 24-557, 1980, Asset #2936MATTISON 42 Rotary Surface Grinder, 42" Table, w/Mist Collection System, Coolant System, 24-552, 1977, Asset #3071BRYANT 1116 Grinder, w/12" 3-Jaw Chuck, Tail Stock, w/Coolant System, 480 Volt, 3 Phase, Asset #2847WALTER 571 Universal Grinder, Asset #2977HISEY-WOLF Grinder Pedestal, Double 10" WheelMOHAWK 330 Grinder, 330042Grinder Pedestal 9", Double Wheel
CHUCKERS(2) WARNER SWASEY 2ACL Chuckers, w/12" 3-Jaw Chuck, 19–938 RPM, Adjustable Saddlers, 2567591, 1974, Asset #2888, 2567594, 1983, Asset #6278
(2) WARNER SWASEY 2AC Chuckers, w/12" 2-Jaw Chuck, 19–938 RPM, Fixed Saddler, 2093688, 1966, Asset #425, 2572746, 1994, Asset #5015
WARNER SWASEY 4AC Chucker, w/14" 2-Jaw Chuck, 26–706 RPM, Max. Chuck-24", 6" Cross Slide Stroke, 12 Tool Holder, 2567590, 1975, Asset #2894
LATHES & MILLSMONARCH BB Engine Lathe, 20.5" Swing, 48" Center w/Tool Holder, w/Tail Stock, w/10" 3-Jaw Chuck, 22789, Asset #1016
BRIDGEPORT Vertical Mill, 1.0 HP, w/Acu-Rite 111 Digital Readout, w/Powerfeed 42" x 9" Slotted Table, 94170, 1965
BRIDGEPORT Vertical Mill, 1.0 HP, w/Powerfeed 9" x 42" Slotted Table, 107166, 1966
BRIDGEPORT Vertical Mill, w/Powerfeed 9" x 32" Slotted Table, 77514, Asset #223
INDEX Vertical Mill, w/9" x 46" Slotted Table, 55-7798, Asset #6338
SUNDSTRAND C-5 Vertical Mill, C5-33, 1966, Asset #495
BOSTON DIGITAL CORP. 14-40 CNC Mill, w/Control Panel, Coolant System, MB-375, 1981, Asset #3326
KEARNEY & TRECKER H Mill, w/42" x 9" Slotted Table, 1-5247, Asset #1071
SUNDSTRAND C-2 Mill, C3-163, 1975, Asset #3004
SUNDSTRAND 22 Mill, w/Control Panel, 32-60, 1973, Asset #2881
CINCINNATI MILACRON Milling Machine, w/Control Panels, Hydraulic Pump, 550225, Asset #3188
PARKER Milling Machine, 3 Stations, w/Chip Conveyor, Coolant System, Control Panel, 1970, Asset #2447
MISCELLANEOUS MACHINERY
FOSDICK 536 Jig Bore, w/Coleman Digital Readout, 48" x 19" Slotted Table, Asset #440
CHRISTEN 2-32 Drill Grinder, 460 Volts, 3 Phase, 2861, Asset #3140
MOHAWK 308 Drill Grinder, 220/440 Volts, 3 Phase, SG068, Asset #6310
FOSDICK Drill Press, Single Spindle, w/1/2" Chuck, w/18" x 36" Slotted Table, Asset #1077
JET JDP-20MF Drill Press, Pedestal Type, w/1" Chuck, 1.5 HP Motor, w/19" x 16" Table, 4195-331
DELTA 70-260 Drill Press, w/1/2" Chuck, 88L71 003
SUNDSTRAND Mecano Screw Rigid Mill, w/Magnaflux System, 33928, Asset #1696
SUNNEN MBB-1660 Precision Honing Machine, 480 Volts, 3 Phase, 80825, Asset #6454
6 7
CINCINNATI 2 TOOL & CUTTER GRINDER
DAKE JOHNSON VH-24 VERTICAL BAND SAW
CINCINNATI-MILACRON MONOSET MT TOOL & CUTTER GRINDER
FANUC S-420iL ROBOT
DOALL C-9 HORIZONTAL BAND SAW CONTOUR EX-CELL-O 14-5 OPTICAL COMPARATOR
SURFACE COMBUSTION POWER CONVECTION ALL CASE FURNACE, NATURAL GAS
WILSON/ROCKWELL B523T HARDNESS TESTER
SHEFFIELD 1808-DCC COORDINATE MEASURING MACHINE
1980
MISCELLANEOUS MACHINERY, continued
AMERICAN HMT Radial Arm Drill, 36" Swing, 13" Column, Spindle Speeds, 15 to 2,500 RPM, 5391, Asset #3136
CARLTON 3-A Radial Arm Drill, 13" Column, Spindle Speeds, 12 to 1,200 RPM, 3A-4730, 1964, Asset #227
Drill Presses, Approximately (15) Pedestal Type
DAKE “H” Frame Press, Hydraulic
ENERPAC EER-542, Hydraulic Press, “H” Frame, 100 Ton, Asset #3137
DAKE 0 Arbor Press
DAKE 3A1 Arbor Press, Asset #1601
Belt Sander, Vertical 6"
CRAFTSMAN 10 Bench Top Saw
HABERLE HL-4 Chop Saw, 12" Bench Top, Asset #3250
SUNDSTRAND Vertical Broach, w/Hydraulic Pump, Chip Conveyor, 440 Volts, 3 Phase, 7153, 1969, Asset #2431
(2) ELECTROMATIC Demag Units, Opening Size 24" x 12", w/Conveyor, Asset #3173, 3171
TOOL & TAP GRINDERS/PRESETTERSHYBCO 1100 Tap Grinder, 7726, Asset #3214
LASSER 12-F Tapper
CINCINNATI Monoset Tool and Cutter Grinder, 460 Volts, 3 Phase, 2DTC5P-87-R-7S, Asset #388
CINCINNATI MILACRON Monoset MT Tool and Cutter Grinder, 460 Volts, 3 Phase, 3152A0180-0050, Asset #3284
(3) CINCINNATI 2 Tool and Cutter Grinders, w/6" x 42" Slotted Table, 440 Volts, 3 Phase, 1D2T6R-239, 1D2T6P-205, 1D2T1M-466, Asset #1095, 387, 341
(2) MAKINO C-40 Tool Grinders, w/6" x 42" Slotted Table, E55-8512, D42-2400, Asset #3307, 203
Tool Holders and Tooling, Approximately 3,000, for CAT 50 and CAT 40
(2) DEVLEIG EGS-2550-002, Tool Presetters, w/Heidenhain Digital Readout, 1987, 1989, Asset #4835, 4882
HEALD 4TS Tool Sharpener, 440 Volts, 3 Phase, 2107, Asset #2970
FABRICATION – SAWS & BENDERDoALL C-80 Horizontal Band Saw, 190-74441, 1974, Asset #2971
DoALL 3613-0 Band Saw, w/30 1/2" x 30 1/2" Table, 440 Volts, 3 Phase, 244-67153, 1963, Asset #1021
DoALL L.H.V. Band Saw, 16" w/20" x 20" Table
DoALL C-9 Horizontal Band Saw, w/Coolant System, 480 Volts, 3 Phase, Asset # 2484
DAKE JOHNSON VH-24 Vertical Band Saw, w/26" x 26" Table, 460 Volts, 3 Phase, 1985, Asset #3408
Brake/Bender 10', Hydraulic, 10 Gauge Max., Asset #1186
CRAFTSMAN 10 Radial Arm Saw, 2.5 HP, w/24" x 6" Manual Conveyor
NIAGARA Shear, 65" Opening, 480 Volts, 3 Phase, w/27" x 9", 10 Gauge Maximum Manual Roller Conveyor, Spare Blades, Asset #9032
Straightener/Roller, 60", Three Rollers, 480 Volts, 3 Phase, Asset #1193
ROBOTSFANUC S-420iL Robot, Disconnected, w/Fanuc System R-J2 Controller, R98503502, 1998, Asset #5398
(2) FANUC S-430iL Robots, 6-Axis, w/Fanuc R-J3 Controller, R99804066, R99404152, 1999, Asset #5472, 5471
(2) FANUC S420iL Robots, w/Controller, R97603722, R97603801, 1997, Asset #5285, 5286
COORDINATE MEASURING MACHINES/INSPECTION EQUIPMENT
SHEFFIELD 1808-DCC Coordinate Measuring Machine, w/54" x 29" x 8" Granite Table, Processor, Computer System, C-5816-0289, Asset #4858
SHEFFIELD 1808M-DCC Coordinate Measuring Machine, w/64" x 29" x 8" Granite Table, Processor, Computer System, C-664512-98, Asset #5393
SHEFFIELD 1808M-HDCC-HA Coordinate Measuring Machine, w/Granite Table, Computer System, 2-5044-1285, Asset #3402
CONTOUR EX-CELL-O 14-814 Optical Comparator, 14" w/Quality 400 Digital Readout, 8140312, Asset #1041
CONTOUR EX-CELL-O 14-5 Optical Comparator, 14" w/Metronics Quadra-Chek II Digital Readout, 8140090
CLARK DCR-8 Hardness Tester, DC782
LOUIS SMALL RDI14-10 Hardness Tester, 7008
WILSON/ROCKWELL B523T Hardness Tester, Digital Readout, 81484609
WILSON/ROCKWELL B504R Hardness Tester, w/Stand, 938-31008, Asset #2944
Indicators; Calipers; Parallel Bars; Dial Snap Gauges; Bore Gauges; Height Gauges; Set Rings
6 7
<ADF 910 PARTS WASHER
ADF SYSTEMS 900 PARTS WASHER
CATERPILLAR TI25D FORKLIFT
CATERPILLAR T50B FORKLIFT
CATERPILLAR STAND-UP TYPE PALLET WAGON
FORKLIFTS/ELECTRIC CARTS/ FLOOR SWEEPER
ALLIS CHALMERS ACE30A Forklift, Riding Electrical 3,000 lbs., 36 Volts, Two Stage Mast w/130" Mast Reach, 36" Forks, Side Shift, 6,733 Hours, DAEI03539, Asset #3147
CATERPILLAR T50B Forklift, Riding Propane 5,000 lbs., Three Stage Mast, 156" Mast Reach, 42" Forks, Side Shift, 5,011 Hours, 14N3625P, Asset #3169
CATERPILLAR TI25D Forklift, Riding Propane 12,500 lbs., Three Stage Mast w/126" Mast Reach, 60" Forks, Side Shift, 326 Hours, 5MB03570, Asset #12636
(2) CATERPILLAR T50B Forklifts, Riding Propane 5,000 lbs., Three Stage Mast w/42" Forks, 156" Mast Reach, 7,259 & 1,839 Hours, 14N1009, 14N3019PA, Asset #2905 & 3099
CATERPILLAR Stand-Up Type Pallet Wagon, 4' x 5' Bed, Poly 200 Gallon Tank, 24 Volts, 16,962, Asset #12504
TOWMOTOR 600LP Forklift, Riding Propane 9,000 lbs., Two Stage Mast, 42" Forks, Mast Reach 86", 645 Hours, 600600029, Asset #2617
TOWMOTOR 462SG4024 Forklift, Riding Propane 4,000 lbs., Two Stage Mast, 106" Mast Reach w/36" Forks, 1,138 Hours, 462SG41115, Asset #370
TOWMOTOR 502SG5024 Forklift, Riding Propane 5,000 lbs., Three Stage Mast w/156" Mast Reach, 42" Forks, Side Shift, 2,588 Hours, 502S1469, Asset #2443
TAYLOR-DUNN 1248-B Personnel Cart, Used for In-Plant Fire Truck, Four Wheel Electric Vehicle w/76" x 42" Bed, Fire Extinguishers, Firefighting Gear, Nozzles, 67929, Asset #3332
TAYLOR-DUNN B2-48 Personnel Cart, Electric Four Wheel, 36 Volts, Built-In Charger, 42" x 76" Bed, Miller Bobcat 225NT, 8,000 Watt Welcher w/Kohler Propane Gas Engine, 97245, Asset #3168
TAYLOR-DUNN 1248-B Personnel Cart, Electric Four Wheel, 36 Volts, Built-In Charger, 74" x 42" Bed, Ridgid 535 Auto Pipe Threader, 60641, Asset #3279
TAYLOR-DUNN 1248-B Personnel Cart, Electric Four Wheel, 36 Volts, Built-In Charger, 6' x 42" Bed, 36004, Asset #3143
TENNANT 7400 Floor Sweeper, Riding Type, Propane, 2,998 Hours, 7400-3191
(4) CUSHMAN 898320 Personnel Carts, Electric Three Wheel, 24 Volts, Built-In Charger
PARTS WASHERSADF 910 Parts Washers, Opening Size 42" Diameter, 8-4192-008, Asset #5668
(2) ADF 800 Parts Washers, Opening Size 32" Diameter, 9509-2778, 9703-3332, 1995, Asset #5158 & 5235
ADF Systems 900 Parts Washers, Opening Size 30" x 48", 440 Volts, 3 Phase, 9510-2814, Asset #5163
ADF Systems 900 Parts Washers, Opening Size 30" x 48", 440 Volts, 3 Phase, 9605-2998, 1996, Asset #5175
PROCECO Typhoon HD-26-36-E-1000-R Parts Washers, Tank Size 36" x 24" x 18", 130 USG, 12 KW, 92012, Asset #4956
PROCECO Typhoon HD-26-36-E-1000-R Parts Washers, 26" Turntable Parts Holder, 92-013, Asset #4957
FINISHING EQUIPMENT A-Wash Wash Station, Four Station w/Overhead Lifting Device, Control Panel, Load/Unload Manual System, 1966, 1979, Asset #3235
WELDERSMILLER 250 Mig Welder
LINCOLN 250 Arc Welder, Asset #2615
Arc Welder, Asset #2616
BRIDGE CRANES & HOISTSCONCO Bridge Crane, Wright 2 Ton Hoist System, (2) Approximately 100' I-Beam Rails, Approximately 45' Span, Asset #3008
YALE Bridge Crane, 2 Ton, (2) Approximately 160' I-Beam Rails, Approximately 45' Span
(2) WRIGHT Bridge Cranes, 2 Ton Cable Type, (2) Approximately 300' I-Beam Rails, Approximately 45' Span
(2) Bridge Cranes, 2 Ton, 50' Span, (2) Approximately 250' I-Beam Rails
BUDGIT Hoist, 1/4 Ton Chain Type w/Jib
CM Hoist, 1/2 Ton Chain Type w/Jib
COFFING Hoist, 1 Ton, Chain Type w/Jib
DEMAG Hoist, 275 Pounds w/Jib
LOADSTAR Hoist, 1 Ton, Chain Type
(2) LOADSTAR Hoists, 1 Ton Chain Type w/Jib
YALE Hoist, 1 Ton, Chain Type, w/Jib
PLANT SUPPORT EQUIPMENTCINCINNATI MILACRON 3373385 Coolant Reclaiming System, 115 Volts, 0193, Asset #12264
Assorted Size and Style Electric Motors
Assorted Size and Style Ladders
Assorted Size Dump Hoppers
Assorted Size Welding Tables
TORIT 140-20 Dust Collector Unit, Approximate Size 8' x 5' x 10', Asset #3273
TORIT 130-20 Dust Collector Unit, Approximate Size 5' x 5' x 10', Asset #3274
TORIT 130-24 Dust Collector Unit, Asset #3275
Electric and Air Hand Tools
OBERLIN Filter System, Pumps, Control Panels, Asset #3289
D.E. SMITH Filtration System, Underground Conveyor w/Pumps, Control Panels, Asset #3403
Grinding Wheels, Assorted Size/Type
Hydraulic Pallet Jacks
(2) I-Beam Rails, Approximately 190', Approximately 25' Span
Approximately (5) Jib Cranes
OM-8 Mist Collection System, Asset #3333
RIDGID 535 Pipe Threader, Auto
UFM Sand Blast Cabinet, Asset #3060, Single Person Unit, w/Loader/Unloader Conveyor
ZERO Sand Blaster, One Person System w/Hopper/Filter System
BLACK BODY S3434-4 Shrink Wrap System, w/Automatic Cart On Track, Opening Size Approximately 5' W x 4' D, 9041, Asset #5399
Slotted Table, w/Coolant System, w/Phillips Digital Controller
MOHAWK 99 Step Grinder, 240 Volts, 3 Phase, SG015, Asset #2802
Approximately (12) Assorted Walk-Behind Lifts
Assorted Size and Style LISTA and VIDMAR Storage Cabinets
This Sale will be a “Webcast” auction, which enables you to bid securely in real-time from the comfort of your own computer. To utilize this service, register with Michael Fox International at www.michaelfox.com. To learn more
about how a webcast works, please go to the Support section on our homepage and choose “Webcast Instructions.”
www.industrialauctioneers.org
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 305
POSTMASTER: Dated Material.Please Deliver Promptly.
FIRST CLASS MAIL
http://www.michaelfox.com
e-mail: [email protected]
NORTH AMERICAN OFFICESARIZONA, MARYLAND, MICHIGAN, NEW YORK, ILLINOIS, FLORIDA, CONNECTICUT,
NEBRASKA, WASHINGTON, ONTARIO, ADDITIONAL OFFICES WORLDWIDE
EXECUTIVE OFFICES11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117(410) 654-7500 • (800) 722-3334 • Fax (410) 654-5876
LOCAL SERVICE WITH GLOBAL REACH — OFFICES IN OVER 20 COUNTRIES GoIndustry • Michael Fox International • Henry Butcher International • Karner & Co. • Appelboom
SAUER-DANFOSS INC.TUESDAY, DECEMBER 5
(SECOND DAY IF NECESSARY)AT 9:00 A.M. (CST)
WORLDWIDE MANUFACTURER FOR THE AUTOMOBILE INDUSTRY
LARGEST OFFERING OF LATE MODEL CNC EQUIPMENT WITH TOOLING & PLANT SUPPORT
IP-6207681
WORLDWIDE MANUFACTURER FOR THE AUTOMOBILE INDUSTRY
INFORMATION PROVIDED IS BELIEVED TO BE ACCURATE, BUT IS NOT GUARANTEED
FINANCING YOUR AUCTION PURCHASE
Conserve Your Cash and Increase Your Bidding Power
AuctionLease Provides M&E Financing With Approvals from
$5,000 to $999,000.
(800) 438-1470
Apply Online: www.AuctionLease.com
“Buy What Appreciates, Lease What Depreciates.”
-J. Paul Getty
GoIndustryMichael Fox International, Inc.
Appraisal ServicesMichael Fox International’s professional appraisal department values machinery, equipment and inventory throughout the world. From small quantities to multiple
plants, our large accredited staff is available to service your appraisal needs.
USPAP compliant and accepted by major financial institutions.
Executive Offices: (800) 722-3334Call today for a no obligation quote.
AUCTIONSITE
LaSalle, IL
TERMS OF SALENO WARRANTIES: Every item and lot in the “Auction” is sold: (a) “AS IS, WHERE IS AND WITHOUT RECOURSE,” and (b) with no warranties, guarantees or representation of any kind or variety, whether expressed, implied or otherwise. Some items subject to prior sale and removal.PAYMENT: May be made by cash, certifi ed funds or company check with a confi rming letter of guarantee from an acceptable issuing bank. SAMPLE BANK LETTER: This bank guarantees payment to Michael Fox International, Inc. from (name of customer) on account # up to the amount of $ . This letter is valid for purchases at the Sauer-Danfoss Inc. auction, Tuesday, December 5, and Wednesday, December 6 if necessary.American Express, Visa, and Mastercard will be accepted for this sale.BUYER’S PREMIUM: 15% buyer’s premium will be discounted by 2.5% to all buyers paying by cash, certifi ed funds, or company check with a confi rming letter of guarantee from an acceptable issuing bank.
INSPECTIONMonday, December 4, from 10:00 A.M. to 4:00 P.M. (CST) or by appointment.
REMOVALRemoval must be completed by January 17, 2007. There will be no removal Friday, December 22 through Tuesday, January 2.
AIRPORT & TRANSPORTATIONThe area is serviced by the Chicago Midway and O’Hare Airports.
OVERNIGHT ACCOMMODATIONSHoliday Inn Express (Auction Headquarters).................................................... (815) 883-3535La Quinta Inn ............................ (815) 224-9000Fairfi eld Inn ...............................(815) 223-7456
CONTACT INFORMATIONFor further information, contact Jennifer Leshem (800) 722-3334, ext. 272, or [email protected]
DIRECTIONSFrom Midway: Exit airport and take Cicero Avenue (North)/Highway 50, go approximately 2.5 miles and enter Interstate 55 (South), go to Interstate 80 (West) exit 250-B, go to exit 77, IL-351 and follow exit ramp to fi rst traffi c light and turn right onto Cicic Road/30th Road, go to the end of road and turn left onto Charles Street/East 3rd, go approximately 1/4 mile and auction site islocated on right hand side just past the 4-way stop sign intersection.
Some items may be subjectto prior sale