hurom+hu-500+dg+manual+english
TRANSCRIPT
-
+
+
+
+
+
Product Contents
HE SERIES
HE_4PJ12170_V.01.indd 1 2013-01-24 4:38:19
-
Dear Hurom Customers
General description and parts names
Specific terms for parts
Precautions for safe use
Warnings and cautions
Slow Juicer assembly
Slow Juicer assembly in detail
How to use the appliance
Juice Cap and Extraction Packing
When the Screw is stopped during operation (How to use [Reverse/REV] button)
Important safeguards in use
Disassembly, cleaning and care
Bowl disassembly and wash
Sterilization and Easy Cleaning System
Spinning Brush disassembly and wash
Spinning Brush assembly
Bowl Packing assembly
Juice Cap Packing assembly
Troubleshooting
Appliance specifications
Warranty
Hurom Juicer Manual For Household Use (Warranty Included)
1 Read Precautions for safe use (Page 4) carefully and use the appliance properly.
2 Keep the manual within reach anytime and save it for future reference.
3 Check if the voltage indicated on the base of the appliance corresponds to the local voltage before you connect the appliance.
4 Any quality improvements are subject to change without notice.
CONTENTS
01
02
03
04
05
08
09
10
11
12
13
14
16
17
18
19
20
21
22
23
24
HE_4PJ12170_V.01.indd 2 2013-01-24 4:38:19
-
With Huroms own Slow Squeezing System and the Juice Cap as an additional mixing function, you can easily make personalized juice in rich tastes and flavors in full preserved valuable nutrients.
1. Much More Nutrients and Taste: Your own personalized juice
Various mixed juice Not only enjoying single fruit juice but also adding various ingredients to your taste and health, you can simply make your own HUROM juice.
Hurom juice as an alternative meal Make Hurom juice as an alternative meal in rich taste and balanced nutrients by mixing banana, corn or boiled potato, sweet potato and pumpkin, etc. supplementing calories with essential nutrients.
Hurom baby food Mixing grain and vegetables with proper amount of water, you can easily make Hurom baby food for growth phases.
Soybean milk and soy juice Unlike the traditional method that you must put boiled beans and water together, adjusting its portion while the Juice Cap is closed, anyone can easily make soybean milk and soy juice in desired concentration.
2. Much More Convenient and User Friendly
Opening and closing the juice cap, you can adjust the amount of juice as desired without any drops when you pour juice into a container.
3. Much More Advanced Easy Cleaning System (Page 17)
Unlike the method rinsing under tap, it is easier and simpler with the Juice Cap. Just fill up the bowl with water while the Juice Cap is closed and then operate the appliance for easy washing.
HE_4PJ12170_V.01.indd 3 2013-01-24 4:38:19
-
HOPPER
SPINNING BRUSH
BASE
SQUEEZING SCREW
02 l
GENERAL DESCRIPTION AND PARTS NAMES
BOWL
COARSE STRAINER
FINE STRAINER
CLEANING BRUSH
PUSHER
PULP CONTAINER
JUICE CONTAINER
SMALL CLEANING BRUSH
HOPPER LID
HE_4PJ12170_V.01.indd 4 2013-01-24 4:38:20
-
3. Pulp outlet
1. Hopper front triangle
7. Juice cap
2. Bowl triangle
5. Operating switch
6. Juice outlet
8. Power cord
9. Grip
4. Hopper rear part
www.hurom.com I 03
NUMBER OF ATTACHMENT
SPECIFIC TERMS FOR PARTS
The holes of the strainer are small. Use it when making pure juice with hard fruits, beans or higher fibered vegeta-bles. It is useful to extract clearer juice.
The bigger holes of the strainer produce thicker juice when tender and soft fruits are extracted such as strawberries, kiwis and tomatoes. It is useful to extract more pulpy juice.
1 pusher, 1 hopper, 1 hopper Lid, 1 screw, 1 fine strainer, 1 coarse strainer, 1 spinning brush, 1 bowl, 1 base, 1 juice container,
1 pulp container, 1 small cleaning brush, 1 cleaning brush, 1 manual
STRAINER*
COARSE STRAINER
FINE STRAINER
HE_4PJ12170_V.01.indd 5 2013-01-24 4:38:20
-
All users of this appliance must read and understand this safety precaution before operating.
WARNING Hazards or unsafe practices which could result in serious personal injury or death.
This sign indicates contents of regulating or directing actions.Specific instructions are written around or in the sign.
This sign indicates prohibited acts.Specific prohibitions are written around or in the sign.
CAUTION Hazards or unsafe practices which could result in minor personal injury or appliance damage.
This sign indicates contents that may cause risk of a fire or an electrical shock.Specific warnings are written in the sign.
SIGN EXAMPLES
This sign indicates contents that may cause risk of a fire or an electrical shock.Specific warning is written in the sign.
PRECAUTIONS FOR SAFE USE
04 l
HE_4PJ12170_V.01.indd 6 2013-01-24 4:38:21
-
WARNING Hazards or unsafe practices which could result in serious personal injury or death.
CAUTION Hazards or unsafe practices which could result in minor personal injury or appliance damage.
www.hurom.com l 05
WARNINGS AND CAUTIONS
WARNING Hazards or unsafe practices which could result in serious personal injury or death.
DO NOT PLUG IN OR UNPLUG WITH WET HANDS.It may cause an electric shock or an injury.
DO NOT USE OTHER THAN 230V - 240V AC.It may cause an electric shock, a fire or an abnormal performance.If the voltage is different, it may shorten the life of the motor or cause a failure.
PLUG THE POWER CORD CORRECTLY AND PUSH IT TIGHT IN A WALL SOCKET.It may cause an electric shock or a fire.
DO NOT MOISTEN THE BASE OR SPLASH WATER ON THE BASE.Be careful not to let any liquids or other substances get into the switch on the appliance.DO NOT OPERATE THE SWITCH WITH WET HANDS.It may cause an electric shock or a fire.
NEVER ALTER THE APPLIANCE. ALSO, DO NOT DISASSEMBLE OR REPAIR BY YOUR-SELF. DO NOT INSERT FINGERS, FOREIGN SUBSTANCES OR OBJECTS SUCH AS PINS INTO GAPS OR HOLES IN THE BASE. It may cause a fire, an electric shock or a failure.For any technical support, contact the authorized local Customer Care Center.
WHEN THE POWER CORD, WIRE WAS BROKEN OR DAMAGED OR THE PLUG-IN PART BECAME LOOSE, DO NOT OPERATE IT.It may cause an electric shock, a fire or an injury.
FOR SAFETY, MUST DO GROUNDING CONNECTION. ALSO, DO NOT DO THE GROUNDING ON GAS PIPE, PLASTIC WATER PIPE, TELEPHONE WIRE, ETC.It could cause an electric shock, a fire, a malfunction and an explosion. Be sure to use the socket with ground connection.
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD. If the power cord is damaged, it may cause an electric shock or a fire.
HE_4PJ12170_V.01.indd 7 2013-01-24 4:38:21
-
NEVER DISASSEMBLE BOWL SET DURING OPERATION OR INSERT FINGERS, FOREIGN OBJECTS SUCH AS FORKS, SPOONS, ETC. INTO FEEDING TUBE OR JUICE OUTLET. It may cause an injury, an accident or a failure.
DO NOT OPERATE WITHOUT LOCKING THE HOPPER PROPERLY.It may cause an injury or a failure.
WHEN DETECTING A GAS LEAK, DO NOT INSERT THE POWER CORD INTO ITS SLOT. OPEN THE WINDOW TO VENTILATE FULLY AND IMMEDIATELY.It may cause an injury or a failure.
NEVER PUT A FINGER, A FORK OR A SPOON, ETC. INTO JUICE OUTLET.It may cause an injury or a failure.
DURING THE OPERATION, DO NOT ATTEMPT TO MOVE THE BASE, DISASSEMBLE THE BOWL SET OR PARTS AND TRY TO LOCK THEM.It may cause an injury or a failure.Any act of event needed, switch off first and unplug the power cord.
WARNINGS AND CAUTIONS
CAUTION Hazards or unsafe practices which could result in minor personal injury or appliance damage.
06 l
IF SCREW ROTATION IS STOPPED IN NORMAL OPERATION, PRESS [REVERSE/REV] BUTTON AND HOLD FOR 2~3 SECONDS AND THEN AFTER REVERSE OPERATION IS COMPLETELY STOPPED, PRESS [ON] BUTTON AGAIN. If such a stop event continues during the operation, the parts may be damaged and performance may be deteriorated due to overheating in a motor. When the problem continues, immediately stop the appliance and contact the local Customer Care Center.
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.Children should be supervised to ensure that they do not play with the appliance.
HE_4PJ12170_V.01.indd 8 2013-01-24 4:38:22
-
30minute
www.hurom.com l 07
WARNINGS AND CAUTIONS
DO NOT OPERATE THE APPLIANCE FOR MORE THAN 30 MINUTES AT A TIME.It may cause a motor failure due to overheating. Cool it down sufficiently about 5 minutes and operate it again.
WHEN PLACING INGREDIENTS INTO THE FEEDING TUBE, ONLY USE THE PUSHER PROVIDED.It may cause an injury or a failure.
DO NOT ALLOW A SEVERE SHOCK TO THE APPLIANCE OR DROP IT.It may cause an electric shock, a fire or damage.
IF THE APPLIANCE GIVES OFF AN UNPLEASANT SMELL OR EXCESSIVE HEATING, SMOKE, STOP USING IMMEDIATELY AND CONTACT THE LOCAL CUSTOMER CARE CENTER. When using a new appliance, it gives off a smell and the smell disappears naturally over time.
ALWAYS UNPLUG THE APPLIANCE AFTER USE.WHEN UNPLUGGING THE POWER CORD, MAKE SURE TO HOLD THE POWER CORD.If holding the wire to unplug, it may cause an electric shock or a fire.
DO NOT WASH AT HIGH TEMPERATURES OF 800C(1760F) OR MORE.DO NOT PUT THE APPLIANCE IN A DISHWASHER, A DRYER OR A MICROWAVE ETC. It may cause a failure or parts deformation.
THE APPLIANCE WEIGHS ABOUT 6KG (13.2LB). WHEN MOVING THE APPLIANCE, ENSURE TO MOVE IT HOLDING GRIPS TIGHTLY AT THE BASE BOTTOM WITH BOTH HANDS. If attempting to hold bowl or the edge of the base, the base falls causing an injury or a failure.
WHEN USING THE APPLIANCE, BE CAREFUL FOR A NECKTIE, LONG NECKLACE, SCARF, ETC. NOT TO BE ENTANGLED INTO FEEDING TUBE.It may cause an injury, a failure or a breakage.
PLACE THE APPLIANCE ON A FLAT AND STABLE SURFACE.It may cause an injury or a failure.
HE_4PJ12170_V.01.indd 9 2013-01-24 4:38:23
-
OPEN
Make sure to press the screw down into the strainer as in STEP 2. The hopper does not close properly when the screw does not fit in completely.
Place the bowl in the base.
A spinning brush can be assembled regardless of the
direction.
Assemble the parts as following order: Bowl>Spinning Brush> Strainer. Make sure bowl triangle [ OPEN ] aligns with strainer triangle [ ].
4
3
2
1
STEP
STEP
STEP
STEP
SLOW JUICER ASSEMBLY
08 l
Align hopper front triangle [ ] with bowl triangle [ OPEN ] first and turn it to clockwise until it clicks so that the hopper triangle [ ] is aligned with bowl triangle [Close ].
HE_4PJ12170_V.01.indd 10 2013-01-24 4:38:23
-
Strainer bump
Bowl inner groove
BOTTOM OF THE
STRAINER
INSIDE THE BOWL
Open
1
2,3Assemble the parts in the order of bowl> spinning brush> strainer> squeezing screw> hopper (or assemble the spinning brush into the bowl then fit strainer bump in the bowl inner groove). Make sure all the triangles of bowl [ OPEN ], strainer [ ] and hopper [ ] are aligned in a vertical line.
Insert extraction packing at the bottom of the bowl hard enough into the pulp outlet. Make sure bowl outer groove aligns with base bump completely.
Bowl outer groove
Base bump
Extraction packing
Align the hopper rear part with base completely as in below.The hopper does not close properly when the parts are not assembled correctly.4
Hopper rear part
Hopper
Strainer
Bowl
Spinning brush
Squeezing Screw
www.hurom.com I 09
SLOW JUICER ASSEMBLY IN DETAIL
HE_4PJ12170_V.01.indd 11 2013-01-24 4:38:24
-
HOW TO USE THE APPLIANCE
10 l
Press [On] button to start.
off()
REAR VIEW
1
2
3
Motor does not stop immediately clicking [Reverse/REV] for the safety reason and performance. It stops slowly.
OPERATING SWITCHES
Normal direction
Reverse direction
Press
off (stop) Stop
Normal direction
Reverse direction
OPERATING SWITCHES
Normal direction
Reverse direction
Reverse direction
Normal direction
STOP status
After juicing is completed, click [Reverse/REV] to stop.
Wash the fruits and/or vegetables and cut them into pieces that fit into the feeding tube. Place the suitable pieces into feeding tube slowly and press with a pusher. Use fresh fruits and vegetable for juicing as they contain more juice themselves.
HE_4PJ12170_V.01.indd 12 2013-01-24 4:38:24
-
Open
JUICE CAP AND EXTRACTION PACKING
www.hurom.com l 11
JUICE CAPThis is the cap of juice outlet in the bowl.Close the juice cap and fill up with juice in the bowl with various ingredients. You can easily make mixed fruit juice or vegetable juice.
Close juice cap and press [ON] button to start.1
When juice starts filling up the bowl, you can mix banana, nuts, boiled sweet potato, etc. and liquids such as milk, etc. as well as vegetables and fruits like smoothies.
2
3 Open juice cap to pour out as much as you need and close without any drops.
EXTRACTION PACKINGThis is the pulp stopper made of silicone at the bottom of the bowl.Make sure to close extraction packing always as shown below before use. For cleaning, let extraction packing opened and start washing. (Page 16)
Juice cap
Juice cap
Juice cap packing
CLOSED
Extraction packing
HE_4PJ12170_V.01.indd 13 2013-01-24 4:38:25
-
If the screw does not work even after the above process, unplug the power cord from the socket, disassemble the bowl set, wash and use it again.
Normal direction
(ON)
WHEN THE SCREW IS STOPPED DURING OPERATION (REVERSE/REV BUTTON)
1
2
3
Reverse direction(REV)
Stop
12 l
NOTE
Reverse is the button pushing ingredients upward.Reverse only works while the button is pressed and held. Once release the button, screw rotation stops.
Click [Reverse/REV] button in operating switches and stop the appliance.
Press [Reverse/REV] button in operating switches for 3~5 seconds and release it. Repeat this process 2~3 times.
After the rotation stops completely, press [ON] button to operate.
Any direction you want to change from either Normal direction or Reverse direction, make sure that screw rotation is stopped completely. Then operate any button you need.
HE_4PJ12170_V.01.indd 14 2013-01-24 4:38:25
-
30minute
www.hurom.com l 13
DO NOT OPERATE SWITCHES WITH WET HANDS.It may cause an electric shock, an electric leakage or a fire.
Do not stain any foreign substances around switches.
IMPORTANT SAFEGUARDS IN USE
NEVER INSERT A FINGER, A FORK OR A SPOON, ETC. INTO JUICE OUTLET DURING OPERATION.If inserting a fork, etc. into juice outlet during operation, it is stuck in spinning brush and causes a part damaged.
ONLY USE THE PUSHER TO PRESS DOWN THE INGREDIENTS. Using other object, it is stuck in the screw and causes a part damaged, an injury or a failure.
DO NOT PLACE GRAINS, FRUIT WITH HARD SEED OR NUTS WITH HARD SHELL SUCH AS WALNUTS.It may cause damage or a failure of bowl, screw, squeezing strainer,etc.
Fruits with pits, hard seeds such as nectarines, peaches, mangos, apricots, plums and cherries must be pitted before juicing.
DO NOT USE IT FOR MORE THAN 30 MINUTES CONTINUOUSLY.It may cause a failure due to overheating in a motor.
But, when using continuously, stop and cool it down about 5 minutes for each use.
Frozen fruit or withered ingredients stored in the refrigerator for a long time may produce less juice or it is even hard to squeeze them. NOTE
DO NOT PUT FRUIT PRESERVED IN SUGAR, HONEY, ALCOHOL, ETC. (GRAPES, APRICOT, BERRIES, ETC.).It may cause the hopper unopened.
DO NOT PUT SEAFOOD OR MEAT.It may cause abnormal performances or a failure.
Fruits with pits, hard seeds such as nectarines, peaches, mangos, apricots, plums and cherries must be pitted before juicing. Cut fibrous ingredients (water parsleys, etc.) in small size like 3~4cm (1.5 inch) and place to the feeding tube. Drink the fruit juice or green vegetable juice immediately after you have extracted. If it is exposed to air sometime, the juice will lose its taste and natural value. Do not use the appliance for grinding the dry ingredients such as grains, coffee beans, etc. It may cause a part damaged or a failure. Do not squeeze the leftovers again which already come out from pulp outlet. Do not operate the appliance when the bowl is empty.
HE_4PJ12170_V.01.indd 15 2013-01-24 4:38:25
-
1
2
3
Juice outlet
14 l
DISASSEMBLY, CLEANING AND CARE
FIGURE IN ORDER
HE_4PJ12170_V.01.indd 16 2013-01-24 4:38:26
-
4 5
www.hurom.com l 15
1. Ensure the motor stops completely and unplug the power cord.
2. Hold the juice outlet and the hopper with both hands and lift them up from the base.
When unplugging the power cord, hold the head part of the power cord and unplug it. Do not touch the power cord with wet hands.
Always wash the bowl set immediately after each use. Without wash-up, remained pulps get dried up and stuck onto it. It makes difficult to disassemble or wash them. Also, it may cause degradation in performance.
DISASSEMBLY, CLEANING AND CARE
3. Disassemble the parts in reverse as below:1) Unlock the bowl twisting to counterclockwise.2) Take the screw out.3) Remove the strainer. 4) Take the spinning brush out and disassemble the silicone brush.
4. Rinse each parts with cleaning brush and brush the inside and outside under running water. Never use scouring pads, abrasive cleaning agent, aggressive liquids or sharp cleaning tools. Do not wash them in a dishwasher or a dish dryer.
5. Wipe the stain on the base with soft damp cloth or wrung towel and dry it thoroughly. Do not immerse the base unit in water or any other liquid, nor rinse it under tap.
6. After each cleaning, allow them to air-dry completely and store them in a clean and safe place.
HE_4PJ12170_V.01.indd 17 2013-01-24 4:38:27
-
Extraction Packing
juice cap packing
bowl packing
BOWL DISASSEMBLY AND WASH
Open juice cap first. Hold the bowl and juice cap with one hand and remove juice cap packing with the other hand like taking it off. When removing it, be careful not to drop the juice cap and bowl. It may cause damage to the juice cap.Remove the bowl packing like pinching and twisting it with two fingers.
Wash bowl and bowl packing with cleaning brush under the running water.
16 l
1 Remove Juice Cap packing and bowl packing.
2 Open the extraction packing at the bot-tom of the bowl. 3 Wash the bowl and all the packings.
HE_4PJ12170_V.01.indd 18 2013-01-24 4:38:27
-
Open
www.hurom.com l 17
STERILIZATION AND EASY CLEANING SYSTEM
You can thoroughly wash them immersing in the water diluted with one or two drops of baking soda or natural wash-up liquids for about 30 minutes.
For sterilization, use baking soda or natural wash-up liquids only.
1 After closing the juice cap, pour the water into feeding tube and operate the appliance. 2 After a while, open the juice cap and discharge the water.
STERILIZATION
EASY CLEANING SYSTEM
Whenever changing the ingredient, it is not necessary to disassemble and wash the bowl.After juicing, make sure to disassemble and wash the bowl set.
HE_4PJ12170_V.01.indd 19 2013-01-24 4:38:27
-
3
2
1
SPINNING BRUSH DISASSEMBLY AND WASH
Detach the silicone brush from spin-ning brush.
With cleaning brush, wash inside and outside of spinning brush like brush-ing under the running water.
As shown to the left, hold the outer part of silicone brush with your fingers and pull it out to the arrow direction. It is recommendable to remove it according to the above method. If pulling it by force, silicone brush may be torn or spinning brush may be damaged.
Wash silicone brush in the same way under the running water.
Remove the spinning brush from strainer.
18 l
Silicone brush
Cleaning brush
Spinning brush
HE_4PJ12170_V.01.indd 20 2013-01-24 4:38:28
-
www.hurom.com l 19
SPINNING BRUSH ASSEMBLY
Insert the silicone brush into the spinning brush.
According to the No. 1 above, let the longer part of inner wing face upward.
Hold the outer wing of silicone brush with your thumb and index finger and insert the inner wing into the groove of spinning brush.
Check the groove of the spinning brush and the direction of silicone brush.
There are grooves to insert silicone brush in the spinning brush. Silicone brush has inner wing and outer wing .
As shown to the left, let inner wing face the spinning brush.
12
1
2
Pull the inner wing tight enough.
Push silicone brush from the outer side of spinning brush and pull inner wing in the direction of inside of the spinning brush with the other hand as shown to the left.
Pull it until you cannot pull it any longer.If units are operating without fully assembled, there is a risk of breakage.
Hold up and down of outer wing and pull it tight enough.
3
2
1
Brushgroove
Innerwing
Outer wing
1
2
1
2
SPINNING BRUSH SILICONE BRUSH
Up (longer part)
Down(shorter part)
HE_4PJ12170_V.01.indd 21 2013-01-24 4:38:28
-
BOWL PACKING ASSEMBLY
Insert the bowl packing into the bowl hole.
Turn over the bowl and organize the bowl packing in place.
Insert the bottom of the bowl packing into the bowl hole and fully press it down.Do not insert whole part of bowl packing. The upper part of the bowl packing must be shown.
If the bowl packing at the bottom of the bowl is not fully inserted and bent, organize it with the rotating attractor of the cleaning brush.
Hold the bowl packing like pinching.As shown to the left in a dotted circle, let the protru-sion part on the bowl packing face upward and hold it like pinching with your thumb and index finger.
20 l
Bowl packing
3
2
1
HE_4PJ12170_V.01.indd 22 2013-01-24 4:38:28
-
www.hurom.com l 21
JUICE CAP PACKING ASSEMBLY
Open the juice cap and insert the juice cap packing in.
Organize the packing to seal off completely.
Insert it in from the top to the juice cap. Be careful not to drop the bowl.
If the packing is not completely sealed, it may cause juice leaking.
Hold juice cap packing as shown to the left.
As shown to the left in a dotted circle, the hole must be visible when you hold.
Juice cap packing
3
2
1
HE_4PJ12170_V.01.indd 23 2013-01-24 4:38:28
-
Check the details below before contacting Technical Support for repair or service.
If you need information or if you have a problem, please contact the local Customer Care Center or visit www.hurom.com.
When applying for after sales service, check the manufacturers serial number or bar code.
THE APPLIANCE DOES NOT WORK.Make sure the power cord is properly plugged in. Check the hopper is assembled properly. If the hopper has not been properly locked in place, the appliance does not work for safety reason.Check if the appliance has been assembled according to the manual in an ordinary manner. See the assembly in the manual or consult with the local Customer Care Center for help.
THE HOPPER DOES NOT OPEN.Are there lots of pulps left inside the bowl? Press [ON ] button to discharge internal pulp somehow.Have you placed any foreign substances or solid object such as hard seeds? Press the [Reverse/REV] button to make foreign substances come up again toward the feeding tube. Do not attempt to open it by force or with too much pressure. Still it does not work following by the above process, contact the local Customer Care Center.
IT STOPS DURING NORMAL OPERATION.Have you put heavy loads of ingredient or thick/big ingredient? Read the manual Page 12 and follow Reverse/REV button guideline. Still the problem has not been solved, contact the local Customer Care Center.
THERE ARE THE GATE MARKS (FORMING MARK) RESULTING FROM THE MOLDING PROCESS. It is a normal part and there is no problem for use.
WHAT IS THE DIFFERENCE BETWEEN FINE STRAINER AND COARSE STRAINER?Use fine strainer with small holes if you want somewhat clear juice.Use the coarse strainer with bigger holes if you want more pulpy juice or thicker juice. Regarding strainer selection for suitable ingredients, read the manual Page 3.
JUICE LEAKS OVER THE BASE.Is Extraction packing properly inserted in?Juice could leak when the extraction packing is not properly inserted in. Please push the extraction packing tight enough.
Juice is still leaking even though the extraction packing was inserted properly? Did you put heavy loads?If an amount of input ingredient is too much compared to the size of pulp outlet, the packing may be slightly pushed out and juice may leak through the gap. Do not process heavy loads at a time and squeeze little by little.
THE BOWL SHAKES WHEN SQUEEZING.Slight shaking may be occurred due to motor movement. Large or small movements occur depending on the pulp texture of ingredients (hard or tough).It is normal when the screw is rotating. Please note that it is not malfunction.Hard ingredients (e.g: carrots/potatoes/radishes/beetroots, etc.) may shake the bowl more than soft and juicy ingredient.
TROUBLESHOOTING
22 l
HE_4PJ12170_V.01.indd 24 2013-01-24 4:38:28
-
Check the details below before contacting Technical Support for repair or service.
If you need information or if you have a problem, please contact the local Customer Care Center or visit www.hurom.com.
When applying for after sales service, check the manufacturers serial number or bar code.
www.hurom.com l 23
APPLIANCE STANDARDS
APPLIANCE SPECIFICATIONS
PRODUCT NAME
MODEL NAME
RATED VOLTAGE
RATED FREQUENCY
RATED POWERCONSUMPTION
RPM (REVOLUTIONSPER MINUTE)
CORD LENGTH
MOTOR
FUSE
WEIGHT
OUTWARD DIMENSIONS
RATED OPERATING HOUR
Hurom Slow Juicer
HE Series
230-240 V
50 Hz
150 W
70 RPM
1.4 m
Single-phase induction motor
250 V 5 A
6.01 KG (13.2 LB)
Width 160 mm
Length 218 mm
Height 405 mm
Less than 30 minutes
HE_4PJ12170_V.01.indd 25 2013-01-24 4:38:29
-
Product name
Important: To better protect your purchase, fill out and mail this form to a local distributor where you have purchased,
and keep the original receipt.
This certifies that the Hurom Slow Juicer is warranted by Hurom Co., Ltd. to be free from defects in material construc-
tion and workmanship.
The motor warranted for five (5) years and other parts are warranted for one (1) year from the date of purchase to the
original purchaser.
This warranty does not apply to damages caused by accident, misuse, abuse, commercial use, alteration, failure to
follow operating instructions, or damage caused by parts or service unauthorized by Hurom Co., Ltd. Damages caused
by transportation must be claimed with carrier.
Hurom Co., Ltd. disclaims all responsibilities for consequential damages from incidental losses caused by use of this
appliance.
If service should be necessary, please contact our local Customer Care Center for technical difficulty.
Manufacture : Hurom Co., Ltd.Hurom webpage : www.hurom.com
Manufactures serial number
Supplier
Address
Model name
Date of purchase
Customer name
WARRANTY
24 l
HE_4PJ12170_V.01.indd 26 2013-01-24 4:38:29
-
www.hurom.com l 25
MEMO
HE_4PJ12170_V.01.indd 27 2013-01-24 4:38:29
-
www.hurom.com Copyright All Rights Reserved by HUROM
4PJ12170_V.01
HE_4PJ12170_V.01.indd 28 2013-01-24 4:38:29