hvac3 fittings copper brass

Upload: mahesh

Post on 09-Apr-2018

224 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/8/2019 Hvac3 Fittings Copper Brass

    1/19

  • 8/8/2019 Hvac3 Fittings Copper Brass

    2/19

    1065

    TOTALINEBRASS FITTINGS

    TOTALINE BRASS FITTINGS

    TUBE

    SIZE (in.)x

    PIPE

    SIZE

    WT. PER

    100 (lbs)

    BULK

    QTY

    BOX

    QTY P/N

    FEMALE CONNECTOR - Tube to Female Pipe1/8 x 1/8 4.30 1500 10 P806-U3-2A

    3/16 x 1/8 3.50 1500 10 P806-U3-3A

    1/4 x 1/8 3.86 1400 25 P806-U3-4A

    1/4 x 1/4 6.42 750 25 P806-U3-4B

    1/4 x 3/8 7.67 550 10 P806-U3-4C

    5/16 x 1/8 4.27 1300 25 P806-U3-5A5/16 x 1/4 12.64 750 25 P806-U3-5B

    3/8 x 1/8 6.46 900 25 P806-U3-5A

    3/8 x 1/4 7.97 650 25 P806-U3-6A

    3/8 x 3/8 19.52 450 50 P806-U3-6C

    3/8 x 1/2 16.23 250 25 P806-U3-6D

    1/2 x 1/4 10.51 400 25 P806-U3-8B

    1/2 x 3/8 10.96 400 25 P806-U3-8C

    1/2 x 1/2 17.08 220 25 P806-U3-8D

    112 x 3/4 16.36 220 25 P806-U3-8E

    5/8 x 3/8 14.00 300 25 P806-U3-10C

    5/8 x 1/2 18.82 200 25 P806-U3-10D

    5/8 x 3/4 18.86 200 10 P806-U3-10E

    MALE ELBOW - Pipe1/8 x 1/8 3.10 1700 25 P806-E1-2A

    3/16 x 1/8 3.17 1500 25 P806-E1-3A

    1/4 x 1/8 3.88 1300 50 P806-E1-4A

    1/4 x 1/4 5.74 800 50 P806-E1-4B

    1/4 x 3/8 9.23 500 25 P806-E1-4C

    5/16 x 1/8 5.08 1000 50 P806-E1-5A

    5/16 x 1/4 6.44 750 25 P806-E1-5B

    5/16 x 3/8 9.32 500 10 P806-E1-5B

    3/8 x 1/8 8.14 650 25 P806-E1-6A

    3/8 x 1/4 8.96 550 50 P806-E1-6B

    3/8 x 3/8 10.90 400 50 P806-E1-6C

    3/8 x 1/2 15.22 270 25 P806-E1-6D

    3/8 x 3/4 20.36 200 25 P806-E1-6E

    1/2 x 1/4 14.52 300 25 P806-E1-8B

    1/2 x 3/8 13.12 300 25 P806-E1-8C

    1/2 x 1/2 17.11 210 25 P806-E1-8D1/2 x 3/4 20.38 170 10 P806-E1-8E

    5/8 x 3/8 19.81 200 10 P806-E1-10C

    5/8 x 1/2 21.66 170 10 P806-E1-10D

    5/8 x 3/4 23.71 100 10 P806-E1-10E

    3/4 x 1/2 29.80 100 10 P806-E1-12D

    3/4 x 3/4 37.05 80 5 P806-E1-12E

    TUBE

    SIZE (in.)X

    PIPE

    SIZE

    WT. PER

    100 (lbs)

    BULK

    QTY

    BOX

    QTY P/N

    FEMALE ELBOW - Tube to Female Pipe1/4 x 1/8 4.63 1100 50 P806-E3-4A

    1/4 x 1/4 8.00 600 25 P806-E3-4B

    5/8 x 1/4 8.64 600 10 P806-E3-5B

    3/8 x 1/8 10.49 500 10 P806-E3-6A

    3/8 x 1/4 7.55 500 25 P806-E3-6B

    3/8 x 3/8 9.88 400 50 P806-E3-6C3/8 x 1/2 16.58 250 25 P806-E3-6D

    1/2 x 3/8 12.34 320 10 P806-E3-8C

    1/2 x 1/2 19.04 200 25 P806-E3-8D

    1/2 x 3/4 23.65 160 10 P806-E3-8E

    5/8 x 1/2 22.16 180 10 P806-E3-10D

    5/8 x 3/4 27.44 130 10 P806-E3-10E

    TUBE

    SIZE (in.)

    WT. PER

    100 (lbs)

    BULK

    QTY

    BOX

    QTY P/N

    UNION ELBOW - Tube to Tube1/8 2.96 2000 25 P806-E2-2

    3/16 3.67 1900 25 P806-E2-3

    1/4 5.42 1000 10 P806-E2-45/16 6.00 900 10 P806-E2-5

    3/8 10.08 500 25 P806-E2-6

    1/2 14.66 300 25 P806-E2-8

    5/8 22.97 180 10 P806-E2-10

    3/4 40.25 70 5 P806-E2-12

    CROSS - Tube (All)3/8 17.70 250 10 P806-C1-6

    FEMALE CONNECTOR FEMALE ELBOW UNION ELBOW CROSSMALE ELBOW

    P377-1 P377-2 P377-3 P377-4 P377-5

  • 8/8/2019 Hvac3 Fittings Copper Brass

    3/19

    1066

    TOTALINEBRASS FITTINGS

    TOTALINE BRASS FITTINGS

    TUBE

    SIZE (in.)x

    PIPE

    SIZE

    WT.

    100 (lbs)

    PER

    QTY

    BULK

    QTY

    BOX

    P/N

    MALE BRANCH TEE - Tube to Tube to Male Pipe1/8 x 1/8 4.00 1300 10 P806-T1-2A

    1/4 x 1/8 5.11 850 25 P806-T1-4A

    1/4 x 1/4 7.27 600 25 P806-T1-4B

    5/16 x 1/4 10.09 400 10 P806-T1-5B

    3/8 x 1/4 6.56 350 25 P806-T1-6B

    3/8 x 3/8 13.29 300 25 P806-T1-6C

    3/8 x 1/2 38.64 170 10 P806-T1-5D

    1/2 x 3/8 18.97 200 10 P806-T1-5C

    1/2 x 1/2 32.04 140 10 P806-T1-6D

    5/8 x 1/2 32.20 110 10 P806-T1-10D

    MALE RUN TEE - Tube to Tube to Male Pipe1/4 x 1/8 5.06 900 25 P806-T3-4A

    1/4 x 1/4 21.72 600 25 P806-T3-4B

    5/16 x 1/4 9.82 500 5 P806-T3-5B

    3/8 x 1/4 12.43 350 10 P806-T3-6B

    3/8 x 3/8 13.34 300 10 P806-T3-6C

    3/8 x 1/2 24.69 170 10 P806-T3-6D

    1/2 x 3/8 18.99 200 10 P806-T3-8C

    1/2 x 1/2 26.09 140 10 P806-T3-8D

    5/8 x 1/2 32.27 100 10 P806-T3-10D

    TUBE

    SIZE (in.)

    WT. PER

    100 (lbs)

    BULK

    QTY

    BOX

    QTYP/N

    UNION TEE - Tube to Tube To Tube3/16 4.88 100 10 P806-T2-3

    1/4 5.52 800 25 P806-T2-4

    5/16 9.65 500 10 P806-T2-5

    3/8 13.76 300 25 P806-T2-6

    1/2 20.88 180 10 P806-T2-8

    5/8 33.18 110 10 P806-T2-10

    TUBE

    SIZE (in.)X

    PIPE

    SIZE

    WT. PER

    100 (lbs)

    BULK

    QTY

    BOX

    QTYP/N

    REDUCER - Male Flare to Female Flare1/4 x 3/8 9.00 450 25 P806-UR3-64

    1/4 x 1/2 13.40 300 10 P806-UR3-84

    3/8 x 1/4 6.66 500 25 P806-UR3-46

    3/8 x 1/2 13.66 250 25 P806-UR3-86

    1/2 x 3/8 12.09 330 10 P806-UR3-68

    1/8 x 5/8 19.00 180 10 P806-UR3-108

    5/8 x 1/2 16.29 200 10 P806-UR3-810

    TUBE

    SIZE (in.)

    WT. PER

    100 (lbs)

    BULK

    QTY

    BOX

    QTYP/N

    FLARED SEAL PLUG1/4 2.16 3000 25 P806-P2-4

    5/16 3.27 2000 25 P806-P2-5

    3/8 5.73 1100 25 P806-P2-6

    1/2 8.95 600 25 P806-P2-8

    5/8 12.90 400 10 P806-P2-10

    VALVE CONNECTOR - Female Flare to Female Flare1/4 2.64 800 10 P806-U4-4

    3/8 12.37 400 10 P806-U4-6

    1/2 21.50 240 10 P806-U4-8

    MALE BRANCHTEE

    MALE RUN TEE UNION TEE REDUCER FLAREDSEAL PLUG

    VALVECONNECTOR

    P378-1 P378-2 P378-3 P378-4 P378-5 P378-6

  • 8/8/2019 Hvac3 Fittings Copper Brass

    4/19

    1067

    TOTALINECOPPER FITTINGS

    TOTALINE COPPER FITTINGS

    O.D. SIZE

    (in.)

    BOX

    QTY

    MASTE

    RPACK

    APPROX.

    NET WT.P/N

    101 SERIES - COUPLING, No Stop3/8 50 1000 .0080 P805-W1901

    1/2 50 1000 .0140 P805-W1902

    5/8 100 1000 .0280 P805-W1903

    3/4 25 500 .0400 P805-W1904

    7/8 50 500 .0600 P805-W1905

    1-1/8 25 250 .104 P805-W1906

    1-3/8 20 200 .150 P805-W1907

    1-5/8 10 100 .217 P805-W1908

    2-1/8 5 50 .401 P805-W1909

    2-5/8 5 50 .624 P805-W1910

    3-1/8 5 40 .970 P805-W1911

    3-5/8 1 16 1.390 P805-W101 3 5/8

    4-1/8 2 16 1.990 P805-W1913

    101R SERIES - REDUCING COUPLING1/4 x 3/16 50 1000 .005 P805-W1004

    3/8 x 5/16 50 1000 .008 P805-W1010

    3/8 x 1/4 50 1000 .008 P805-W10111/2 x 3/8 50 1000 .017 P805-W1019

    1/2 x 1/4 50 1000 .017 P805-W1021

    5/8 x 1/2 50 1000 .028 P805-W1023

    5/8 x 3/8 50 1000 .020 P805-W1025

    5/8 x 1/4 50 1000 .026 P805-W1027

    3/4 x 5/8 25 500 .035 P805-W1029

    3/4 x 1/2 25 500 .037 P805-W1030

    3/4 x 3/8 25 500 .033 P805-W1031

    7/8 x 3/4 50 500 .064 P805-W1035

    7/8 x 5/8 50 500 .059 P805-W1036

    7/8 x 1/2 50 500 .050 P805-W1037

    101R SERIES COUPLINGS CONTINUED

    NOTE: Order Totaline Copper Fittings by Part Number and

    Model Series Number.

    O.D. SIZE

    (in.)

    BOX

    QTY

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    100 SERIES - COUPLING, Staked Stop5/16 50 1000 .0059 P805-W10142

    3/8 50 1000 .008 P805-W101431/2 50 1000 .014 P805-W10144

    5/8 100 1000 .026 P805-W10145

    3/4 25 500 .040 P805-W10157

    7/8 50 500 .061 P805-W10146

    1-1/8 25 250 .104 P805-W10147

    1-3/8 20 200 .150 P805-W10148

    1-5/8 10 100 .217 P805-W10149

    2-1/8 5 50 .401 P805-W10150

    2-5/8 5 50 .642 P805-W10151

    3-1/8 5 40 .970 P805-W10152

    3-5/8 1 16 1.390 P805-W10153

    4-1/8 2 16 2.040 P805-W10154

    100RS SERIES - COUPLING, Rolled Stop3/16 50 1000 .0025 P805-W1001

    1/4 50 1000 .0041 P805-W1003

    5/16 50 1000 .0059 P805-W100RS 5/16

    3/8 50 1000 .008 P805-W1009

    1/2 50 1000 .014 P805-W1017

    5/8 100 1000 .026 P805-W1022

    3/4 25 500 .040 P805-W1028

    7/8 50 500 .061 P805-W1034

    1 10 200 .085 P805-W1040

    1-1/8 25 250 .104 P805-W1047

    1-3/8 20 200 .150 P805-W1055

    1-5/8 10 100 .217 P805-W1063

    2-1/8 5 50 .401 P805-W1072

    2-5/8 5 50 .642 P805-W1082

    3-1/8 5 40 .970 P805-W1092

    3-5/8 1 16 1.390 P805-W10100

    4-1/8 2 16 2.040 P805-W10107

    100 SERIESCOUPLING

    100RS SERIESCOUPLING

    101 SERIESCOUPLING

    101R SERIESREDUCING COUPLING

    Staked Stop,Copper to Copper

    Rolled Stop,Copper to Copper

    No Stop,Copper to Copper

    Copper to Copper

    P756 P756A P758 P759

  • 8/8/2019 Hvac3 Fittings Copper Brass

    5/19

    1068

    TOTALINECOPPER FITTINGS

    TOTALINE COPPER COUPLINGS

    O.D. SIZE

    (in.)

    BOX

    QTY

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    101R SERIES (continued)7/8 x 3/8 50 500 .053 P805-W1038

    1-1/8 x 7/8 25 250 .103 P805-W1049

    1-1/8 x 3/4 25 250 .100 P805-W1050

    1-1/8 x 5/8 25 250 .105 P805-W1051

    1-1/8 x 1/2 25 250 .094 P805-W1052

    1-3/8 x 1-1/8 10 100 .144 P805-W1056

    1-3/8 x 7/8 10 100 .130 P805-W1058

    1-3/8 x 5/8 10 100 .177 P805-W1060

    1-5/8 x 1-3/8 10 100 .210 P805-W1064

    1-5/8 x 1-1/8 10 100 .220 P805-W1065

    1-5/8 x 7/8 10 100 .218 P805-W1067

    1-5/8 x 5/8 10 100 .209 P805-W1069

    2-1/8 x 1-5/8 10 100 .386 P805-W1073

    2-1/8 x 1-3/8 10 100 .369 P805-W1074

    2-1/8 x 1-1/8 10 100 .382 P805-W1075

    2-1/8 x 7/8 10 100 .397 P805-W1077

    2-1/8 x 5/8 10 100 .402 P805-W10792-5/8 x 2-1/8 5 50 .612 P805-W1083

    2-5/8 x 1-5/8 5 50 .660 P805-W1084

    2-5/8 x 1-3/8 5 50 .648 P805-W1085

    2-5/8 x 1-1/8 5 50 .640 P805-W1086

    3-1/8 x 2-5/8 2 20 .902 P805-W1093

    3-1/8 x 2-1/8 2 20 .950 P805-W1094

    3-1/8 x 1-5/8 2 20 1.040 P805-W1095

    3-5/8 x 3-1/8 1 16 1.360 P805-W10101

    4-1/8 x 3-5/8 2 32 1.960 P805-W10108

    4-1/8 x 3-1/8 2 32 1.950 P805-W10109

    4-1/8 x 2-5/8 2 32 2.020 P805-W10110

    6-1/8 x 4-1/8 1 6 3.000 P805-615415

    O.D. SIZE

    (in.)

    BOX

    QTY

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    110 SERIES - ECCENTRIC COUPLING1-1/8 x 7/8 10 100 .110 P805-W1849

    1-3/8 x 1-1/8 10 100 .160 P805-W1856

    1-3/8 x 7/8 10 100 .200 P805-W1857

    102 SERIES - UNION3/8 25 500 .120 P805-W8001

    1/2 25 250 .170 P805-W8002

    5/8 25 250 .120 P805-W8003

    7/8 20 200 .310 P805-W8004

    1-1/8 10 100 .380 P805-W8005

    1-3/8 5 50 .76 P805-A11205

    1-5/8 5 50 1.07 P805-A11206

    2-1/8 1 25 1.77 P805-A11207

    102F SERIES - UNION1/2 x 3/8 10 200 .210 P805-W102F 1/2x3/8

    102M SERIES - UNION3/8 x 1/4 10 200 .180 P805-W102M 3/8x1/4

    NOTE: Order Totaline Copper Fittings by Part Number and

    Model Series Number.

    101 SERIESECCENTRIC COUPLING

    102 SERIESUNION

    102F SERIESUNION

    102M SERIESUNION

    Copper to Copper Copper to Copper Copper to Female N.P.T. Copper to Male N.P.T.

    P760P761 P762 P763

    (picture is illustratedwith fitting attached)

  • 8/8/2019 Hvac3 Fittings Copper Brass

    6/19

    1069

    TOTALINECOPPER FITTINGS

    TOTALINE COPPER COUPLINGS & UNIONS

    O.D. SIZE

    (in.)

    BOX

    QTY

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    103 SERIES - FEMALE ADAPTER1/4 x 1/8 50 1000 .024 P805-W1207

    3/8 x 1/4 50 1000 .030 P805-W1215

    1/2 x 3/8 50 500 .060 P805-W1225

    5/8 x 1/2 50 500 .090 P805-W1231

    7/8 x 3/4 25 250 .140 P805-W1246

    1-1/8 x 1 25 250 .220 P805-W12631-3/8 x 1-1/4 10 100 .290 P805-W1271

    1-5/8 x 1-1/2 10 100 .420 P805-W1279

    2-1/8 x 2 5 50 .650 P805-W1287

    2-5/8 x 2-1/2 2 20 1.200 P805-W1296

    1032 SERIES - FEMALE STREET ADAPTER5/8 x 1/2 50 500 .096 P805-W1531

    7/8 x 3/4 25 250 .138 P805-W1546

    1-1/8 x 1 25 250 .199 P805-W1563

    1-1/8 x 3/4 P805-W1564

    1-3/8 x 1-1/4 10 100 .322 P805-W1571

    1-5/8 x 1-1/2 10 100 .500 P805-W1579

    2-1/8 x 2 5 50 .658 P805-W1587

    103R SERIES - REDUCING FEMALE ADAPTER1/4 x 3/8 50 1000 .050 P805-W1205

    1/4 x 1/4 50 1000 .030 P805-W1206

    3/8 x 3/8 50 1000 .050 P805-W1214

    3/8 x 1/8 50 1000 .020 P805-W1216

    1/2 x 1/2 50 500 .080 P805-W1224

    5/8 x 3/4 25 250 .120 P805-W1230

    5/8 x 3/8 50 500 .050 P805-W1232

    5/8 x 1/4 50 500 .060 P805-W1233

    3/4 x 3/4 25 250 .13 P805-W1238

    3/4 x 1/2 25 250 .090 P805-W1239

    7/8 x 1 25 250 .231 P805-W1245

    7/8 x 1/2 50 500 .111 P805-W1247

    1-1/8 x 3/4 25 250 .171 P805-W1264

    1-1/8 x 1/2 25 250 .230 P805-W1265

    1-3/8 x 1-1/2 10 100 .414 P805-W1270

    1-3/8 x 1 10 100 .241 P805-W12721-5/8 x 2 5 50 .658 P805-W1278

    1-5/8 x 1-1/4 10 100 .336 P805-W1280

    1032R SERIES -

    REDUCING FEMALE STREET ADAPTER5/8 x 3/8 50 500 .070 P805-W1532

    104 SERIES - MALE ADAPTER3/8 x 1/4 50 1000 .027 P805-W1115

    1/2 x 3/8 50 500 .049 P805-W1125

    5/8 x 1/2 50 500 .066 P805-W1131

    7/8 x 3/4 25 250 .116 P805-W1146

    1-1/8 x 1 20 200 .192 P805-W11631-3/8 x 1-1/4 10 100 .372 P805-W1171

    1-5/8 x 1-1/2 10 100 .429 P805-W1179

    2-1/8 x 2 5 50 .794 P805-W1187

    2-5/8 x 2-1/2 4 40 1.270 P805-W1196

    3-1/8 x 3 2 20 2.270 P805-W1199

    4-1/8 x 4 1 16 3.34 P805-W1150

    ADAPTERS CONTINUED

    NOTE: Order Totaline Copper Fittings by Part Number and

    Model Series Number.

    103 SERIES WROTFEMALE

    ADAPTER

    1032 SERIESFEMALE STREET

    ADAPTER

    103R SERIESREDUCING FEMALE

    ADAPTER

    104 SERIESMALE

    ADAPTER

    1032R SERIESREDUCING FEMALESTREET ADAPTER

    Copper to Female N.P.T. Fit ting to Female N.P.T. Copper to Female N.P.T. Fi tting to Female N.P.T. Copper to Male N.P.T.

    P764P765

    P766P765

    P768

  • 8/8/2019 Hvac3 Fittings Copper Brass

    7/19

    1070

    TOTALINECOPPER FITTINGS

    TOTALINE COPPER ADAPTERS & ELBOWS

    O.D. SIZE

    (in.)

    BOX

    QTY

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    1042R SERIES -

    REDUCING MALE STREET ADAPTER7/8 x 1/2 25 250 .100 P805-W1447

    106 SERIES - 45 ELBOW3/16 50 1000 .005 P805-W106 3/16

    1/4 50 1000 .005 P805-W3005

    3/8 50 1000 .011 P805-W3012

    1/2 50 1000 .020 P805-W3021

    5/8 100 1000 .030 P805-W3026

    3/4 25 250 .060 P805-W3030

    7/8 50 500 .080 P805-W3034

    1-1/8 25 250 .150 P805-W3044

    1-3/8 25 200 .230 P805-W3050

    1-5/8 20 160 .340 P805-W3055

    2-1/8 10 80 .620 P805-W3059

    2-5/8 5 40 .970 P805-W30633-1/8 3 24 1.440 P805-W3067

    3-5/8 1 16 2.140 P805-W3070

    4-1/8 1 8 3.100 P805-W3073

    107C SERIES - 90 ELBOW SHORT RADIUS1/4 50 1000 .006 P805-W2003

    3/8 50 1000 .012 P805-W2009

    1/2 50 1000 .024 P805-W2017

    5/8 100 1000 .040 P805-W2022

    3/4 25 250 .060 P805-W2028

    7/8 50 500 .100 P805-W2034

    1-1/8 20 200 .180 P805-W2047

    1-3/8 25 200 .280 P805-W2084

    1-5/8 20 120 .400 P805-W2085

    2-1/8 10 80 .750 P805-W2086

    2-5/8 5 40 1.180 P805-W2087

    3-1/8 3 24 1.880 P805-W2088

    4-1/8 1 8 4.220 P805-W2090

    ELBOWS CONTINUED

    O.D. SIZE

    (in.)

    BOX

    QTY

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    1042 SERIES - MALE STREET ADAPTER

    1/2 x 3/8 50 1000 .049 P805-W1425

    5/8 x 1/2 50 500 .074 P805-W1431

    7/8 x 3/4 25 250 .130 P805-W1446

    1-1/8 x 1 20 200 .230 P805-W1463

    1-3/8 x 1-1/4 10 100 .410 P805-W1471

    1-5/8 x 1-1/2 10 100 .500 P805-W1479

    2-1/8 x 2 5 50 .740 P805-W1487

    104R SERIES - REDUCING MALE ADAPTER1/4 x 1/4 50 1000 .033 P805-W1106

    3/8 x 1/2 50 500 .075 P805-W1113

    3/8 x 3/8 50 1000 .049 P805-W1114

    3/8 x 1/8 50 1000 .014 P805-W1116

    1/2 x 3/4 25 250 .140 P805-W1123

    1/2 x 1/2 50 500 .070 P805-W1124

    1/2 x 1/4 50 1000 .040 P805-W11265/8 x 1 20 200 .240 P805-W1129

    5/8 x 3/4 25 250 .140 P805-W1130

    5/8 x 3/8 50 500 .060 P805-W1132

    5/8 x 1/4 50 500 .070 P805-W1133

    3/4 x 3/4 25 250 .130 P805-W1138

    3/4 x 1/2 25 500 .080 P805-W1139

    7/8 x 1 20 200 .250 P805-W1145

    7/8 x 1/2 25 250 .110 P805-W1147

    1-1/8 x 1-1/2 10 100 .540 P805-W1161

    1-1/8 x 1-1/4 10 100 .390 P805-W1162

    1-1/8 x 3/4 25 250 .200 P805-W1164

    1-1/8 x 1/2 25 250 .180 P805-W1165

    1-3/8 x 1-1/2 10 100 .520 P805-W1170

    1-3/8 x 1 10 100 .300 P805-W1172

    1-5/8 x 2 5 50 .780 P805-W11781-5/8 x 1-1/4 10 100 .430 P805-W1180

    1-5/8 x 1 10 100 .560 P805-W1181

    2-1/8 x 1-1/2 5 50 .740 P805-W1188

    2-1/8 x 1-1/4 5 50 .670 P805-W1189

    2-5/8 x 2 5 50 .890 P805-W1197

    NOTE: Order Totaline Copper Fittings by Part Number and

    Model Series Number.

    1042 SERIESMALE STREET

    ADAPTER

    104R SERIESREDUCING MALE

    ADAPTER

    1042R SERIESREDUCING MALE

    STREET ADAPTER

    106 SERIES45 ELBOW

    107C SERIES

    SHORT RADIUS90 ELBOW

    Fitting toMale N.P.T.

    Copper toMale N.P.T.

    Copper toCopper

    Copper toCopper

    Fitting toMale N.P.T.

    P769P770

    P769P772

    P773

  • 8/8/2019 Hvac3 Fittings Copper Brass

    8/19

    1071

    TOTALINECOPPER ELBOWS

    TOTALINE COPPER ELBOWS105 series

    long radius45 street elbow

    107 serieslong radius

    90 reducing elbow

    107L2 serieslong radius

    90 street elbow

    107l serieslong radius90 elbow

    NOTE: Order Totaline Copper Fittings by RCD Part Number and Model Series Number.

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    105 SERIES

    45 STREET ELBOW, Long Radius2-1/8 5 40 1.010 P805-W2659

    107R SERIES

    90 REDUCING ELBOW, Long Radius

    1/2 x 3/8 50 1000 .026 P805-W27195/8 x 1/2 50 500 .040 P805-W2723

    7/8 x 3/4 25 250 .120 P805-W2735

    7/8 x 5/8 50 500 .090 P805-W2736

    7/8 x 1/2 50 500 .070 P805-W2737

    1-1/8 x 7/8 25 250 .170 P805-W2749

    1-3/8 x 1-1/8 10 100 .310 P805-W2756

    1-5/8 x 1-3/8 5 50 .470 P805-W2064

    1-5/8 x 1-1/8 5 50 .350 P805-W2065

    2-1/8 x 1-5/8 5 40 .770 P805-W2073

    2-5/8 x 2-1/8 5 50 .350 P805-W2083

    107L2 SERIES

    90 STREET ELBOW, Long Radius3/8 50 1000 .016 P805-W2809

    1/2 50 500 .030 P805-W2817

    5/8 100 1000 .050 P805-W2822

    3/4 25 250 .080 P805-W28287/8 25 250 .120 P805-W2834

    1-1/8 10 100 .210 P805-W2847

    1-3/8 10 80 .390 P805-W2350

    1-5/8 10 80 .580 P805-W2355

    2-1/8 5 40 1.010 P805-W2359

    2-5/8 1 10 1.670 P805-W2363

    3-1/8 1 8 2.510 P805-W2368

    3-5/8 1 8 3.700 P805-W2393

    4-1/8 1 1 5.760 P805-W2395

    107L SERIES 90 ELBOW, Long Radius1/4 50 1000 .008 P805-W2715

    5/16 50 1000 .013 P805-W2710

    3/8 50 1000 .016 P805-W2716

    1/2 50 500 .030 P805-W2717

    5/8 100 1000 .060 P805-W2722

    3/4 25 250 .080 P805-W2728

    7/8 25 250 .120 P805-W2734

    1-1/8 10 100 .210 P805-W2747

    1-3/8 10 80 .390 P805-W2055

    1-5/8 10 80 .580 P805-W2063

    2-1/8 5 40 1.020 P805-W2072

    2-5/8 1 10 1.660 P805-W2082

    3-1/8 1 8 2.520 P805-W2092

    3-5/8 1 8 3.700 P805-W2093

    4-1/8 1 1 5.700 P805-W2095

    ELBOWS CONTINUED

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    P775P776 P777

    Fitting toFitting

    P774

    Copperto Copper

    Fittingto Copper

    Copperto Copper

  • 8/8/2019 Hvac3 Fittings Copper Brass

    9/19

    1072

    TOTALINECOPPER ELBOWS

    TOTALINE COPPER ELBOWS

    107cr seriesshort radius 90reducing elbow

    107c2 seriesshort radius 90reducing elbow

    Fittingto Copper

    105c seriesshort radius

    90 elbow

    NOTE: Order Totaline

    Copper Fittings by Part Number and Model Series Number.

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    1062WROT SERIES

    45 STREET ELBOW, Long Radius3/8 50 1000 .011 P805-W3312

    1/2 50 1000 .020 P805-W3321

    5/8 100 1000 .030 P805-W3326

    3/4 25 250 .060 P805-W3330

    7/8 50 500 .080 P805-W3334

    1-1/8 25 250 .150 P805-W3344

    1-3/8 25 200 .240 P805-W3350

    1-5/8 20 160 .340 P805-W3355

    2-1/8 10 80 .630 P805-W3359

    2-5/8 5 40 .980 P805-W3363

    4-1/8 1 8 3.200 P805-W3373

    105C SERIES

    90 STREET ELBOW, Short Radius3/8 25 500 .012 P805-W2612

    5/8 25 500 .050 P805-W2626

    3/4 10 200 .070 P805-W105C 3/4

    7/8 25 250 .100 P805-W26341-1/8 10 100 .180 P805-W2644

    1-3/8 5 50 .280 P805-W2684

    107CR SERIES

    90 REDUCING ELBOW, Short Radius1/2 x 3/8 50 1000 .026 P805-W2019

    5/8 x 1/2 50 500 .040 P805-W2023

    5/8 x 3/8 50 500 .030 P805-W2025

    3/4 x 5/8 25 250 .080 P805-W2029

    7/8 x 3/4 25 500 .026 P805-W2035

    7/8 x 5/8 50 500 .080 P805-W2036

    1-1/8 x 5/8 25 250 .120 P805-W2051

    1-1/8 x 7/8 25 250 .150 P805-W2049

    1-3/8 x 1-1/8 10 100 .230 P805-W2056

    1-5/8 x 1-3/8 10 100 .340 P805-W2077

    2-1/8 x 1-5/8 5 40 .600 P805-W2078

    2-5/8 x 2-1/8 5 40 1.060 P805-25S21S

    107C2 SERIES

    90 STREET ELBOW, Short Radius1/4 50 1000 .006 P805-W2305

    3/8 50 1000 .012 P805-W2312

    1/2 50 1000 .024 P805-W23215/8 100 1000 .050 P805-W2326

    3/4 25 250 .060 P805-W2330

    7/8 50 500 .100 P805-W2334

    1-1/8 25 250 .180 P805-W2344

    1-3/8 25 200 .280 P805-W2384

    1-5/8 20 120 .390 P805-W2385

    2-1/8 10 80 .760 P805-W2386

    2-5/8 5 40 1.180 P805-W2387

    3-1/8 3 25 1.860 P805-W2388

    3-5/8 1 8 2.620 P805-W2389

    4-1/8 1 8 4.200 P805-W2390

    ELBOWS CONTINUED

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    Copperto Copper

    P781

    P782P780

    Fittingto Fitting

  • 8/8/2019 Hvac3 Fittings Copper Brass

    10/19

    1073

    TOTALINECOPPER ELBOWS & REDUCING TEES

    TOTALINE COPPER ELBOWS & REDUCING TEES

    1112 SERIESSTREET TE

    111R, RR or BH SERIESREDUCING TEE

    Copper to Copper to Copper

    111 SERIESTEE

    NOTE: Order Totaline Copper Fittings by Part Number and Model Series Number.

    *

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    1112 SERIES STREET TEE5/2 50 500 .068 P805-W1112 5/8

    7/8 25 250 .174 P805-W1112 7/8

    111 SERIES TEE

    3/16 50 1000 .009 P805-W403021/4 50 1000 .015 P805-W40306

    5/16 50 1000 .020 P805-W40313

    3/8 50 1000 .028 P805-W4000

    1/2 50 500 .047 P805-W4001

    5/8 50 500 .050 P805-W4006

    3/4 25 250 .100 P805-W4017

    7/8 25 250 .160 P805-W4031

    1-1/8 10 100 .330 P805-W4048

    1-3/8 5 50 .460 P805-W4068

    1-5/8 5 50 .710 P805-W4084

    2-1/8 5 40 1.290 P805-W40102

    2-5/8 1 10 1.900 P805-W40123

    3-1/8 1 10 2.750 P805-W40152

    3-5/8 1 8 4.170 P805-W40190

    4-1/8 1 8 6.620 P805-W40200

    *111R Reducing on Outlet.

    111RR Reducing on Run.

    111BH Large Diameter Outlet.

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    111 R, RR or BH SERIES* REDUCING TEE1/4 x 1/4 x 3/16 50 1000 .015 P805-W40308

    1/4 x 1/4 x 3/8 50 1000 .028 P805-W40368

    3/8 x 1/4 x 1/4 50 1000 .028 P805-W40332

    3/8 x 1/4 x 3/8 50 1000 .028 P805-W403303/8 x 3/8 x 1/2 50 500 .047 P805-W4005

    3/8 x 3/8 x 1/4 50 1000 .028 P805-W40324

    3/8 x 3/8 x 5/8 50 500 .063 P805-W4016

    3/8 x 5/16 x 1/4 P805-6S5S4S

    3/16 x 3/16 x 1/4 P805-3S3S4S

    5/16 x 1/4 x 1/4 50 1000 .020 P805-5S4S4S

    5/16 x 5/16 x 1/4 50 1000 .020 P805-5S5S4S

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    1/2 x 1/2 x 1/4 50 500 .047 P805-40350

    1/2 x 1/2 x 3/8 50 500 .047 P805-4002

    1/2 x 1/2 x 5/8 50 500 .063 P805-W4015

    1/2 x 1/4 x 1/2 50 500 .047 P805-W40363

    1/2 x 3/8 x 1/2 50 500 .047 P805-W4003

    1/2 x 3/8 x 1/4 50 500 .047 P805-W40358

    1/2 x 3/8 x 3/8 50 500 .047 P805-W4004

    1/2 x 3/8 x 5/8 50 500 .063 P805-40355

    ELBOWS CONTINUED

    Copper to Copper to CopperCopper to Fitting to Copper

    P784 P785P786

  • 8/8/2019 Hvac3 Fittings Copper Brass

    11/19

    1074

    TOTALINECOPPER ELBOWS & REDUCING TEES

    TOTALINECOPPER ELBOWS & REDUCING TEES

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    111R, RR or BH SERIES (continued)5/8 x 5/8 x 1-1/8 10 100 .320 P805-W4067

    5/8 x 5/8 x 7/8 25 250 .110 P805-W40475/8 x 5/8 x 3/4 50 500 .100 P805-W4029

    5/8 x 5/8 x 1/2 50 500 .060 P805-W4007

    5/8 x 5/8 x 3/8 50 500 .060 P805-W4008

    5/8 x 5/8 x 1/4 50 500 .060 P805-W4014

    5/8 x 1/2 x 5/8 50 500 .060 P805-W4009

    5/8 x 1/2 x 1/2 50 500 .060 P805-W4010

    5/8 x 1/2 x 13/8 50 500 .060 P805-W4011

    5/8 x 3/8 x 5/8 50 500 .060 P805-W4012

    5/8 x 3/8 x 3/8 50 500 .060 P805-W4013

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    3/4 x 1/2 x 1/2 25 250 .100 P805-W4027

    3/4 x 1/2 x 3/4 25 250 .100 P805-W40253/4 x 1/2 x 3/8 P805-W4028

    3/4 x 1/2 x 5/8 25 250 .100 P805-W4026

    3/4 x 3/4 x 3/8 25 250 .100 P805-W4020

    3/4 x 3/4 x 5/8 25 250 .100 P805-W4018

    3/4 x 3/4 x 7/8 50 500 .150 P805-W4046

    3/4 x 5/8 x 1/2 25 250 .100 P805-W4023

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    7/8 x 7/8 x 1-1/8 10 100 .330 P805-W4065

    7/8 x 7/8 x 3/4 25 250 .150 P805-W4032

    7/8 x 7/8 x 5/8 25 250 .140 P805-W4033

    7/8 x 7/8 x 1/2 25 250 .140 P805-W40347/8 x 7/8 x 3/8 25 250 .100 P805-W4035

    7/8 x 5/8 x 7/8 25 250 .150 P805-W4041

    7/8 x 5/8 x 5/8 25 250 .130 P805-W4043

    7/8 x 5/8 x 3/8 25 250 .140 P805-W4045

    7/8 x 1/2 x 5/8 25 250 .140 P805-W40231

    7/8 x 5/8 x 3/4 P805-W4042

    *111R Reducing on Outlet.

    111RR Reducing on Run.

    111BH Large Diameter Outlet

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    1-1/8 x 1-1/8 x 1-3/8 5 50 .460 P805-W4082

    1-1/8 x 1-1/8 x 1-5/8 5 50 .660 P805-W40101

    1-1/8 x 1-1/8 x 1/2 10 100 .270 P805-W4052

    1-1/8 x 1-1/8 x 5/8 10 100 .270 P805-W4051

    1-1/8 x 1-1/8 x 7/8 10 100 .310 P805-W4049

    1-1/8 x 5/8 x 1-1/8 10 100 .330 P805-W4061

    1-1/8 x 5/8 x 5/8 10 100 .270 P805-W4063

    1-1/8 x 5/8 x 7/8 10 100 .310 P805-W4062

    1-1/8 x 7/8 x 1-1/8 10 100 .330 P805-W4055

    1-1/8 x 7/8 x 3/4 10 100 .310 P805-W4057

    1-1/8 x 7/8 x 5/8 10 100 .270 P805-W4058

    1-1/8 x 7/8 x 7/8 10 100 .310 P805-W4056

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    1-3/8 x 1-3/8 x 1-5/8 5 50 .690 P805-W40100

    1-3/8 x 1-3/8 x 2-1/8 5 40 1.290 P805-W401221-3/8 x 1-3/8 x 1-1/8 5 50 .450 P805-W4069

    1-3/8 x 1-3/8 x 7/8 5 50 .370 P805-W4070

    1-3/8 x 1-3/8 x 5/8 5 50 .320 P805-W4071

    1-3/8 x 1-3/8 x 1/2 5 50 .320 P805-W4072

    1-3/8 x 1-1/8 x 1-3/8 5 50 .460 P805-W4073

    1-3/8 x 1-1/8 x 1-1/8 5 50 .450 P805-W4074

    1-3/8 x 1-1/8 x 7/8 5 50 .370 P805-W4075

    1-3/8 x 1-1/8 x 5/8 5 50 .330 P805-W4076

    1-3/8 x 7/8 x 1-3/8 5 50 .470 P805-W4078

    1-3/8 x 7/8 x 1-1/8 5 50 .470 P805-W4079

    1-3/8 x 7/8 x 7/8 5 50 .370 P805-W4080

    1-3/8 x 7/8 x 5/8 5 50 .320 P805-W4081

    1-3/8 x 5/8 x 1-3/8 5 50 .450 P805-W4083

    ELBOWS CONTINUED

    NOTE: Order Totaline Fittings by Part Number and Model Series Number.

  • 8/8/2019 Hvac3 Fittings Copper Brass

    12/19

    1075

    TOTALINECOPPER REDUCING TEES

    TOTALINE COPPER REDUCING TEES

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    111R, RR or BH SERIES (continued)1-5/8 x 1-1/8 x 1-1/8 5 50 .610 P805-W4097

    1-5/8 x 1-1/8 x 1-3/8 5 50 .640 P805-W4096

    1-5/8 x 1-1/8 x 1-5/8 5 50 .690 P805-W4095

    1-5/8 x 1-1/8 x 5/8 5 50 .470 P805-W40237

    1-5/8 x 1-1/8 x 7/8 5 50 .560 P805-W4098

    1-5/8 x 1-3/8 x 1-1/8 5 50 .600 P805-W4092

    1-5/8 x 1-3/8 x 1-3/8 5 50 .640 P805-W4091

    1-5/8 x 1-3/8 x 1-5/8 5 50 .690 P805-W4090

    1-5/8 x 1-3/8 x 5/8 5 50 .470 P805-W4094

    1-5/8 x 1-3/8 x 7/8 5 50 .560 P805-W4093

    1-5/8 x 1-5/8 x 1-1/8 5 50 .610 P805-W4086

    1-5/8 x 1-5/8 x 1-3/8 5 50 .640 P805-W4085

    1-5/8 x 1-5/8 x 26.898 5 40 1.290 P805-W40121

    1-5/8 x 1-5/8 x 5/8 5 50 .470 P805-W4088

    1-5/8 x 1-5/8 x 7/8 5 50 .570 P805-W4087

    1-5/8 x 5/8 x 1-5/8 5 50 .670 P805-W40244

    1-5/8 x 7/8 x 1-1/8 5 50 .600 P805-W402401-5/8 x 7/8 x 1-3/8 5 50 .640 P805-W40239

    1-5/8 x 7/8 x 1-5/8 5 50 .680 P805-W4099

    1-5/8 x 7/8 x 5/8 5 50 .470 P805-W40243

    1-5/8 x 7/8 x 7/8 5 50 .550 P805-W40238

    *111R Reducing on Outlet.

    111RR Reducing on Run.

    111BH Large Diameter Outlet.

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    2-1/8 x 1-1/8 x 1-1/8 5 40 .900 P805-W40247

    2-1/8 x 1-1/8 x 2-1/8 5 40 1.290 P805-W40245

    2-1/8 x 1-3/8 x 1-1/8 5 40 1.000 P805-W40118

    2-1/8 x 1-3/8 x 1-3/8 5 40 1.030 P805-W40117

    2-1/8 x 1-3/8 x 1-5/8 5 40 1.090 P805-W40116

    2-1/8 x 1-3/8 x 2-1/8 5 40 1.300 P805-W40115

    2-1/8 x 1-3/8 x 7/8 5 40 .900 P805-W40119

    2-1/8 x 1-5/8 x 1-1/8 5 40 .950 P805-W40112

    2-1/8 x 1-5/8 x 1-3/8 5 40 1.030 P805-W40111

    2-1/8 x 1-5/8 x 1-5/8 5 40 1.080 P805-W40110

    2-1/8 x 1-5/8 x 2-1/8 5 40 1.300 P805-W40109

    2-1/8 x 1-5/8 x 7/8 5 40 .900 P805-W40113

    2-1/8 x 2-1/8 x 1-1/8 5 40 .990 P805-W40105

    2-1/8 x 2-1/8 x 1-3/8 5 40 1.030 P805-W40104

    2-1/8 x 2-1/8 x 1-5/8 5 40 1.080 P805-W40103

    2-1/8 x 2-1/8 x 2-5/8 1 10 1.900 P805-W40144

    2-1/8 x 2-1/8 x 5/8 5 40 .860 P805-W40107

    2-1/8 x 2-1/8 x 7/8 5 40 .920 P805-W401062-5/8 x 2-5/8 x 2-1/8 1 10 1.660 P805-W40124

    2-5/8 x 2-5/8 x 1-5/8 1 10 1.410 P805-W40125

    2-5/8 x 2-5/8 x 1-3/8 1 10 1.320 P805-W40126

    2-5/8 x 2-5/8 x 1-1/8 1 10 1.340 P805-W40127

    2-5/8 x 2-5/8 x 7/8 1 10 1.250 P805-W40128

    2-5/8 x 2-5/8 x 5/8 1 10 1.060 P805-W40129

    2-5/8 x 2-1/8 x 1-5/8 1 10 1.890 P805-W40130

    NOTE: Order Totaline Fittings by Part Number and Model Series Number.

  • 8/8/2019 Hvac3 Fittings Copper Brass

    13/19

    1076

    TOTALINECOPPER REDUCING TEES

    TOTALINE COPPER REDUCING TEES

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    2-5/8 x 2-1/8 x 2-1/8 1 10 1.630 P805-W40131

    2-5/8 x 2-1/8 x 1-5/8 1 10 1.410 P805-W40132

    2-5/8 x 1-5/8 x 2-1/8 1 10 1.630 P805-W40138

    2-5/8 x 1-5/8 x 1-5/8 1 10 1.400 P805-W40139

    2-5/8 x 1-3/8 x 2-5/8 1 10 1.890 P805-W402202-5/8 x 1-1/8 x 2-5/8 1 10 1.860 P805-W40221

    2-5/8 x 7/8 x 2-5/8 1 10 1.870 P805-W40222

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    3-1/8 x 2-5/8 x 7/8 1 10 2.370 31S25S14S

    3-1/8 x 1-5/8 x 1-5/8 1 10 1.960 P31S15S15S

    3-1/8 x 3-1/8 x 7/8 1 10 1.690 P805-W40146

    3-1/8 x 3-1/8 x 1-1/8 1 10 1.900 P805-W40147

    3-1/8 x 3-1/8 x 1-3/8 1 10 1.920 P805-W40148

    3-1/8 x 3-1/8 x 1-5/8 1 10 2.050 P805-W40149

    3-1/8 x 3-1/8 x 2-1/8 1 10 2.270 P805-W40150

    3-1/8 x 3-1/8 x 2-5/8 1 10 2.420 P805-W40151

    3-1/8 x 2-5/8 x 1-5/8 1 10 2.000 P805-W40156

    3-1/8 x 2-5/8 x 2-5/8 1 10 2.400 P805-W40158

    3-1/8 x 2-1/8 x 2-1/8 1 10 2.270 P805-W40164

    3-1/8 x 2-1/8 x 2-5/8 1 10 2.220 P805-W40165

    O.D. SIZE

    (1N.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    4-1/8 x 2-5/8 x 2-5/8 1 8 5.100 41S25S25S

    4-1/8 x 4-1/8 x 7/8 1 16 4.150 P805-W40192

    4-1/8 x 4-1/8 x 2-1/8 1 8 4.910 P805-W40196

    4-1/8 x 4-1/8 x 2-5/8 1 8 5.260 P805-W40197

    4-1/8 x 4-1/8 x 3-1/8 1 8 5.660 P805-W401984-1/8 x 3-1/8 x 2-1/8 1 8 4.710 P805-W40204

    4-1/8 x 3-1/8 x 2-5/8 1 8 5.080 P805-W40205

    NOTE: Order Totaline Copper Fittings by Part Number and Model Series Number.

    Fitting to Fitting

    P786

  • 8/8/2019 Hvac3 Fittings Copper Brass

    14/19

    1077

    TOTALINECOPPER PLUGS, TUBE CAPS & FITTINGS

    TOTALINE COPPER PLUGS, TUBE CAPS & FITTING REDUCERS

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    116 SERIES END PLUG

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    117 SERIES TUBE CAP1/4 50 1000 .003 P805-W7002

    3/8 50 1000 .005 P805-W7004

    1/2 50 1000 .009 P805-W7006

    5/8 100 1000 .016 P805-W70073/4 25 500 .030 P805-W7008

    7/8 50 500 .040 P805-W7009

    1-1/8 50 500 .060 P805-W7011

    1-3/8 25 250 .100 P805-W7012

    1-5/8 20 200 .150 P805-W7013

    2-1/8 10 100 .260 P805-W7014

    2-5/8 5 50 .450 P805-W7015

    3-1/8 5 50 .690 P805-W7016

    3-5/8 1 10 .970 P805-W7017

    4-1/8 1 10 1.340 P805-W7018

    118 SERIES FITTING REDUCER1/4 x 1/8 50 1000 .004 P805-W1302

    3/8 x 1/4 50 1000 .007 P805-W1306

    1/2 x 3/8 50 1000 .014 P805-W1312

    1/2 x 1/4 50 1000 .016 P805-W1314

    5/8 x 1/2 50 1000 .027 P805-W1315

    5/8 x 3/8 50 1000 .023 P805-W1317

    3/4 x 5/8 25 500 .033 P805-W1320

    3/4 x 1/2 25 500 .035 P805-W1321

    3/4 x 3/8 25 500 .034 P805-W1322

    7/8 x 3/4 50 500 .060 P805-W1325

    7/8 x 5/8 50 500 .060 P805-W1326

    7/8 x 1/2 50 500 .040 P805-W1327

    7/8 x 3/8 50 500 .050 P805-W1328

    1-1/8 x 7/8 25 250 .100 P805-W1337

    1-1/8 x 3/4 25 250 .090 P805-W1338

    1-1/8 x 5/8 25 250 .100 P805-W1339

    1-1/8 x 1/2 25 250 .090 P805-W1340

    1-3/8 x 1-1/8 10 100 .150 P805-W13431-3/8 x 7/8 10 100 .120 P805-W1345

    1-3/8 x 5/8 10 100 .150 P805-W1347

    1-5/8 x 1-3/8 10 100 .210 P805-W1350

    1-5/8 x 1-1/8 10 100 .200 P805-W1351

    1-5/8 x 7/8 10 100 .200 P805-W1353

    1-5/8 x 5/8 10 100 .190 P805-W1355

    2-1/8 x 1-5/8 10 100 .380 P805-W1358

    NOTE: Order Totaline Copper Fittings by Part Number and Model Series Number.

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    2-1/8 x 1-3/8 10 100 .340 P805-W1359

    2-1/8 x 1-1/8 10 100 .360 P805-W1360

    2-1/8 x 7/8 10 100 .380 P805-W1362

    2-1/8 x 5/8 10 100 .390 P805-W1364

    2-5/8 x 2-1/8 5 50 .620 P805-W1367

    2-5/8 x 1-5/8 5 50 .640 P805-W1368

    2-5/8 x 1-3/8 5 50 .610 P805-W1369

    2-5/8 x 1-1/8 5 50 .600 P805-W1370

    3-1/8 x 2-5/8 2 20 .870 P805-W1376

    3-1/8 x 2-1/8 2 20 .950 P805-W1377

    3-1/8 x 1-5/8 2 20 .960 P805-W13783-1/8 x 1-3/8 2 20 1.020 P805-W1379

    3-5/8 x 2-1/8 1 10 1.380 P805-W1383

    4-1/8 x 3-5/8 2 32 1.850 P805-W1386

    4-1/8 x 3-1/8 2 32 1.870 P805-W1387

    4-1/8 x 2-5/8 2 32 1.970 P805-W1388

    4-1/8 x 2-1/8 2 32 2.060 P805-W1389

    5-1/8 x 4-1/8 1 6 4.070 P805-A2008

    118 SERIESFITTING REDUCER

    Fitting to Copper

    P789

    116 SERIESEND PLUG

    For Fitting

    P789

    117 SERIESTUBE CAP

    P788

    For Tube End

  • 8/8/2019 Hvac3 Fittings Copper Brass

    15/19

  • 8/8/2019 Hvac3 Fittings Copper Brass

    16/19

    1079

    TOTALINECOPPER FITTINGS & DATA

    TOTALINE COPPER TUBE STRAPS, EAR HANGERS & PERFORATED STRAPS

    STAND-ARD

    WATER

    TUBE

    SIZE

    MALE END FEMALE END METALTHICK-

    NESS

    T

    INSIDEDIA. OF

    FITTING

    O

    OUTSIDE DIA.

    ALENGTH

    KINSIDE DIA.

    FDEPTH

    G

    MIN. MAX. MIN. MIN. MAX. MIN. MIN. MIN.

    1/8 0.248 0.251 0.38 0.252 0.256 0.31 0.022 0.18

    1/4 0.373 0.376 0.38 0.377 0.381 0.31 0.026 0.30

    3/8 0.497 0.501 0.44 0.502 0.506 0.38 0.031 0.39

    1/2 0.622 0.626 0.56 0.627 0.631 0.50 0.036 0.52

    5/8 0.747 0.751 0.69 0.752 0.756 0.62 0.038 0.63

    3/4 0.872 0.876 0.81 0.877 0.881 0.75 0.041 0.74

    1 1.122 1.127 0.97 1.128 1.132 0.91 0.046 0.98

    1-1/4 1.372 1.377 1.03 1.378 1.382 0.97 0.050 1.23

    1-1/2 1.621 1.627 1.16 1.628 1.633 1.09 0.055 1.47

    2 2.121 2.127 1.41 2.128 2.133 1.34 0.064 1.94

    2-1/2 2.621 2.627 1.53 2.628 2.633 1.47 0.074 2.42

    3 3.121 3.127 1.72 3.128 3.133 1.66 0.083 2.89

    3-1/2 3.621 3.627 1.97 3.628 3.633 1.91 0.093 3.37

    4 4.121 4.127 2.22 4.128 4.133 2.16 0.101 3.84

    5 5.121 5.127 2.72 5.128 5.133 2.66 0.115 4.70

    6 6.121 6.127 3.22 6.128 6.133 3.09 0.130 5.72

    8 8.119 8.127 4.09 8.128 8.133 3.97 0.186 7.55

    SIZEBOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    125 SERIES - PERFORATED STRAP25 Ft. Roll 6 72 1.8 P805-A1211

    O.D. SIZE

    (in.)

    BOX

    QTY.

    MASTER

    PACK

    APPROX.

    NET WT.P/N

    120 SERIES - STRAP1/4 100 2000 .005 P805-A1203

    3/8 100 2000 .007 P805-A1278

    1/2 100 2000 .008 P805-A1366

    5/8 100 1000 .009 P805-A2529

    3/4 100 1000 .011 P805-A1467

    7/8 100 1000 .012 P805-A2574

    1-1/8 100 1000 .014 P805-A2614

    1-3/8 50 500 .041 P805-A2650

    1-5/8 50 500 .048 P805-A2675

    2-1/8 100 800 .063 P805-A2708

    120S SERIES - TUBE STRAP1/4 100 2000 .007 P805-W120S 1/4

    3/8 100 2000 .009 P805-W120S 3/8

    1/2 100 2000 .012 P805-W120S 1/2

    5/8 100 2000 .014 P805-W120S 5/8

    NOTE: Order Totaline Copper Fittings by RCD Part Number and

    Model Series Number.

    COPPER AND BRONZE / SOLDER-JOINT PRESSURE FITTINGSDIMENSIONS OF SOLDERED JOINT ENDS (Dimensions in Inches)

    Extracted from American National Standard Wrought-Copper and Wrought-Bronze Solder-Joint Pressure Fittings (ANSI B16.22) with the

    permission of the publisher. The American Society of Mechanical Engineers, 345 East 47th Street, New York, N.Y.

    120 SERIESTUBE STRAP

    120S SERIESTUBE STRAP

    125 SERIESPERFORATED STRAP

    Double HoleSingle Hole

    Heavy Weight

    3/4Wide

    P795

    P796

    P798

    P391A

  • 8/8/2019 Hvac3 Fittings Copper Brass

    17/19

  • 8/8/2019 Hvac3 Fittings Copper Brass

    18/19

    1081

    TOTALINECOPPER FITTINGS DATA

    COPPER TUBE, CALCULATED BURSTING PRESSURE*

    *Bursting Pressures are calculated from the following formula for thin, hollow cylinders under tension:

    SOLDERING AND BRAZING COPPER TUBE

    NOMINAL

    TUBE SIZE

    (in.)

    OUTSIDE

    DIA. (in.)

    INSIDE DIAMETER

    (in.)

    WALL THICKNESS

    (in.)

    BURSTING PRESSUR

    (lbs per sq in.)

    TYPE K-L TYPE K TYPE L TYPE K TYPE L

    TYPE K TYPE L

    HARD

    (DRAWN)

    SOFT

    (ANNEALED)

    HARD

    (DRAWN)

    SOFT

    (ANNEALED)

    1/4 .375 .305 .315 .035 .030 6,700 5,600 5,800 4,800

    3/8 .500 .402 .430 .049 .035 7,100 5,900 5,000 4,2001/2 .625 .527 .545 .049 .040 5,600 4,700 4,600 3,800

    5/8 .750 .652 .666 .049 .042 4,700 3,900 4,000 3,400

    3/4 .875 .745 .785 .065 .045 5,300 4,500 3,700 3,100

    1 1.125 .995 1.025 .065 .050 4,200 3,500 3,200 2,700

    1-1/4 1.375 1.245 1.265 .065 .055 3,400 2,800 2,900 2,400

    1-1/2 1.625 1.481 1.505 .072 .060 3,200 2,700 2,700 2,200

    2 2.125 1.959 1.985 .083 .070 2,800 2,300 2,400 2,000

    2-1/2 2.625 2.435 2.465 .095 .080 2,600 2,200 2,200 1,800

    3 3.125 2.907 2.945 .109 .090 2,500 2,100 2,100 1,700

    3-1/2 3.625 3.385 3.425 .120 .100 2,400 2,000 2,000 1,700

    4 4.125 3.857 3.905 .134 .110 2,300 1,900 1,900 1,600

    5 5.125 4.805 4.875 .160 .125 2,200 1,900 1,800 1,500

    6 6.125 5.741 5.845 .192 .140 2,300 1,900 1,600 1,400

    8 8.125 7.583 7.725 .271 .200 2,400 2,000 1,800 1,500

    P2tS

    D--------=

    Where P = Bursting Pressure, lb. per sq. in.

    t = Wall Thickness, inches

    D = Outside Tube Diameter, inches

    S = Tensile Strength (36,000 lb. per sq. in. for hard tubes and 30,000 for soft tubes)

    With factor of safety of 5, maximum working pressure allowable by common usage up to 150 F can be taken at 1/5 the above bursting pressures.

    Soldering and Brazing with capillary solder joint fittings is the most com-

    mon system for joining copper tube. The American Welding Society

    defines soldering as a joining process which takes place below 840 and

    brazing as a similar process which occurs above 840.

    The basic theory and technique of soldering and brazing are the same forall diameters ... the variables are: the amount of time, heat and filler metal

    required to complete a designated joint. A good joint is the product of a

    well trained craftsman who knows and respects the materials and meth-

    ods he uses.

    BASIC STEPS IN JOINING PROCESS

    Measuring - Measuring the length of the tube must be accurate. If the

    tube is too short it will not reach all the way into the socket of the fitting

    and a proper joint cannot be made.

    Cutting - Cutting tube can be accomplished in a number of different ways

    to produce a satisfactory, square-end cut. The tube can be cut with a disc

    type tube cutter, a hacksaw, abrasive wheels, or stationary and portable

    bandsaws. Care must be taken that the tube is not deformed while being

    cut. Regardless of the cutting method used, the cut must be square with

    the run of the tube so that it will seat properly in the fitting socket.

    Reaming - Most methods of cutting leave a small burr on the end of the

    tube. Unless these rough edges are removed, erosion-corrosion may

    occur due to local turbulence and increased velocities i n the tube. Tools

    used to ream tube ends include the reaming blade on the tube cutter

    half-round or round files, a pocket knife, or a suitable deburring tool. With

    annealed tube, care must be taken not to get the tube end out-of-round by

    applying too much pressure. Both the inside and the outside of the tube

    may require removal of the burr. A properly reamed piece of tube will pro-

    vide a smooth surface for better flow.

    Cleaning - Cleaning is quickly and easily done. The removal of oxides

    and surface soil is crucial if filler metal is to flow properly. Oxides, surface

    soil and oil can interfere with the strength of the joint and this may result in

    the joints failure. Mechanical cleaning is a simple operation. The end of

    the tube should be cleaned using sand cloth or nylon abrasive pads for adistance only slightly more than the depth of the fitting socket. The socket

    of the fitting should also be cleaned using sand cloth, abrasive pads, or

    properly sized fitting brushes. The same precautions, as when reaming

    the tube, should be observed.

    Copper is a soft metal; if too much material is removed, a loose fit will

    result and interfere with satisfactory capillary action in making the joint.

    The capillary space between tube and fitting is approximately .004 in. Sol-

    der or brazing filler metal can fill this gap by capillary action. This spacing

    is critical for the filler metal to flow into the gap and form a strong joint.

    Chemical cleaning may be utilized, providing the tube and fittings are thor-

    oughly rinsed according to the manufacturers recommendations fur-

    nished with the cleaner. This will help neutralize any acidic conditions that

    may exist. The surfaces, once cleaned, should not be touched with bare

    hands or oily gloves. Skin oils, lubricating oils and grease impair solder

    flow and wetting.

    TEMPERATURE RANGES

    Up to this point, the joining process is the same for both soldering and

    brazing. The choice for soldering or brazing will depend upon operating

    conditions. Solder joints are generally used where the system tempera-

    tures do not exceed 250 F and brazed joints can be used where greater

    strengths are required, or where system temperatures are as high as

    350 F. In actual practice, most solder ing is done at temperatures about

    350 F to 550 F, while brazing is done at temperatures ranging from

    1100 F to 1550 F.

    Because of the differences in the soldering and brazing processes, each

    will be discussed separately.

  • 8/8/2019 Hvac3 Fittings Copper Brass

    19/19

    1082

    TOTALINECOPPER FITTINGS DATA

    SOLDERING AND BRAZING COPPER TUBE (continued)

    provide the craftsman with an indication of temperature. Application of the

    flux is the same as when soldering. If the outside of the fitting and the heat

    affected area of the tube are covered with flux, it will prevent oxidation and

    greatly improve the appearance of the joint.

    Brazing Filler Metals - There are two general types of brazing filler met-

    als used for joining copper tube: BCuP (Brazing - Copper - Phosphorus)and BAg (Brazing - Silver). These brazing filler metals are classified

    according to their components.

    BCuP filler metals are preferred for joining copper tube and fittings. The

    phosphorus in these filler metals acts as a fluxing agent and the lower per-

    centage of silver makes them relatively low cost filler metals. When using

    copper tube, wrot copper fittings and BCuP brazing filler metal, fluxing is

    an option due to the self-fluxing action of the phosphorus present in all

    components of the brazed joint.

    The choice of brazing filler metals depends upon four main factors:1) dimensional tolerance of the joint2) type and material of fitting (cast or wrot)3) desired appearance4) cost.

    Heating - Oxy/fuel torches are generally used when brazing because of

    the higher temperatures required. Due to recent innovations in air/fuel

    torch tip design, they can now be used on a wider variety of sizes for sol-dering and brazing.

    When working with temperatures this high, safety precautions must be fol-

    lowed and care taken to protect both the operator and the materials being

    used.

    The heating operation is the same as for soldering. First preheat the tube

    and then the tube and fitting. When the brazing filler metal starts to melt,

    apply the heat at the base of the fitting socket to help draw the brazing

    filler metal by capillary action.

    Applying Brazing Filler Metal - Remember to allow the heat of the joint

    to melt the filler metal. Do not melt the filler metal with the torch. The

    melted filler metal will be drawn into the joint by capillary action. It is very

    important that the flame be in continuous motion and should not be

    allowed to remain on any one point long enough to burn through the tube

    or fitting. When the joint is complete, a continuous fillet should be visible

    completely around the joint. If the filler metal fails to flow, or has the ten-

    dency to ball-up, it indicated oxidation on the metal surfaces or insufficient

    heat on the parts to be joined. If the filler metal refuses to enter the joint

    and tends to flow over the outside of either part of the joint, it indicates that

    this part is overheated or that the other part is underheated.

    Cooling and Cleaning - When the joint is complete, allow it to cool natu-

    rally. Flux residues can be removed by washing with hot water and brush-

    ing with a stainless steel wire brush.

    SUMMARY

    If the parts to be joined are properly prepared, properly heated and the

    correct filler metal is used the finished joint should be sound. Soldered or

    brazed copper piping systems, when installed properly, will provide years

    of safe and reliable service. Proper training of the correct installation tech-

    niques, such as those just covered, will give the craftsman the ability to

    achieve consistently reliable soldered and brazed joints in all diameters.Prepared with technical assistance from the Copper Development

    Association.

    SOLDERING:

    Applying Flux - A non-aggressive soldering flux is recommended. Stir the

    flux before use. A good flux will dissolve and remove traces of residual

    oxides from the surfaces to be joined, protect the surfaces from re-oxida-

    tion during heating and promote the wetting of the surfaces by the solder A

    thin, even coating of flux should be applied with a brush to both tube andfitting. Avoid the use of fingers to apply flux. Chemicals in the flux can be

    harmful if carried to the eyes of open cuts.

    Types of Solder - There are a variety of solders available that will produce

    sound, leak-tight joints. Solders that are used for piping applications con-

    tain tin and varying amounts of either antimony, copper, lead or silver.

    Choice of solder will depend upon application and local codes. For potable

    water systems, solders which do not contain lead are the best choice.

    Assembly - After both surfaces are properly fluxed, they should be

    assembled by placing the fitting on the tube, making sure the tube seats

    against the base of the fitting socket. A slight twisting motion is suggested

    to ensure even coverage by the flux. Remove the excess flux with a rag.

    Because of the heat that is required during soldering and brazing, only

    cotton rags should be used. Complete all prepared joints within a single

    work day. Care must be taken to assure that the tube and fittings are prop-

    erly supported with a reasonable, uniform capillary space around the

    entire circumference of the joint. Uniformity of capillary space will ensure

    good filler metal penetration if the guidelines of successful joint making

    are followed. Excessive joint clearance can cause the filler metal to crack

    under stress or vibration.

    Heating - Because of the open flame and high temperatures required for

    soldering and the flammabil ity of the gases used, safety precautions must

    be observed. The heat is generally applied by use of an air/fuel torch.

    These torches can use acetylene or a variety of LP gases. Electric resis-

    tance pliers can also be used.

    Heating should begin with the flame perpendicular to the tube. This pre-

    heat will conduct the initial heat into the socket for even distribution of heat

    inside and out. Preheating depends upon the s ize of the joint - experience

    will indicate the proper amount of time. The flame should now be moved

    onto the fitting. Move the flame from the fitting socket onto the tube a dis-

    tance equal to the fitting socket. Touch the solder to the joint. If the solder

    does not melt, remove it and continue the heating process. Be careful notto overheat or direct the flame into the fitting cup. This action can cause

    the flux to burn and destroy its effectiveness. When the melting tempera-

    ture has been reached, heat may be applied to the base of the cup to aid

    capillary action in drawing the solder into the cup.

    Applying Solder - When the tube is in a horizontal position, start applying

    the solder slightly off-center of the bottom of the joint. Proceed across the

    bottom of the fitting and up to the top-center position. Return to the point

    of beginning, overlap the starting point and then proceed up the incom-

    pleted side to the top. Again, overlapping the solder. Molten solder will be

    drawn into the joint by capillary action regardless if the solder is being fed

    upward, downward or hor izontally.

    Cooling & Cleaning - After the joint has been completed, natural cooling

    is best. Shock cooling may cause unnecessary stresses on the joint and

    may result in eventual failure. Clean off any remaining flux with a wet rag.

    BRAZING:

    Applying Flux - The fluxes used for brazing copper joints are different in

    composition from soldering fluxes. They cannot, and should not, be used

    interchangeably.

    Brazing fluxes are water based. Similar to soldering fluxes, brazing fluxes

    dissolve and remove residual oxides from the metal surfaces, they protect

    the metal surfaces from re- oxidation during heating and they promote the

    wetting of the surfaces to be joined by the brazing filler metal. Fluxes also