hydra · 2018. 11. 3. · hydra assembly instructions hydra desk . step 1 remove the leg-cover...
TRANSCRIPT
-
Hydra
Assembly instructions
Hydra Desk
-
Step 1
Remove the leg-cover panels.
Step 2
Remove the right panel from the main structure
-
Step 3
Anchor the Desk legs to the main structure; screw
direction indicated by the arrows
-
Step 4
Anchor the leg-support panel and screw it to the main
structure and legs
-
Step 5
Reposition the leg and main-structure cover-panels.
-
Tips and Tricks
Take off the bottom covers for easy cable routing
Depending on your configuration, you may need to move
the air-guidance vane
-
Use the provided mounting brackets for HDDs and
SSDs
-
Access the motherboard and PCI-E cables by
removing the back-panel; you can route cables via
the dedicated slot (Circled)
The legs also have a “cut” in them, designed for cable
routing
-
Use the cable-routing slots on the motherboard
tray and under the false-bottom for better cable
management.
For easier PCI-E positioning, remove the PCI-E cover
-
Use the provided caps to close off the mounting
holes in the leg
-
You can now position the rubber strip on the edge
of the desk
Once your build is complete, position the glass and
you’re done!