hydraulic bush cutters ghedini ing. fabio series da for ...€¦ · ghedini ing. fabio hydraulic...
TRANSCRIPT
GHEDINI ing. FABIO
Hydraulic bush cutters Series DA
For mini excavators
n. 99828
Internet: www.ghedini.com
E-mail: [email protected] [email protected]
Skype: ghedini.export
Tel. +39 0532 857 373 +39 0532 857 873Fax +39 0532 28 45 032
Our bush cutters series STANDARD have been planned for mini excavators up to 5 tons.
They are fed by the hydraulic system of the mini excavator.
Important: coupling is integrated. A coupling both with pins and for quick coupling is possible.
The external drain is not needed!
our bush cutters series STANDARD are equipped with a couple of Y shaped knives and a third one in the middle, allowing it to finely reduce the material.
DA STANDARD - Technical specifications
Model Oil flow needed
(litres /min)Working width
(mm)Weight of the bush
cutter (kg)Weight of the machine
(ton)
DA 51 19 640 90 0,9 - 1,3
DA 52 26 640 90 1,4 - 2,5
DA 53 36 640 90 2,5 - 3
DA 72 26 840 160 2 - 2,6
DA 73 36 840 160 2,5 - 3,5
DA 74 44 840 160 3,5 - 5
DA 75 55 840 160 4,5 - 5,5
DA 93 36 1080 220 2,7 - 3,5
DA 94 44 1080 220 3,5 - 5
DA 95 55 1080 220 4,5 - 5,5
The hydraulic bush cutters series HEAVY have been engineered to be used on mini exca-vators with a weight ranging from around 2,5 to 5,5 t.The bush cutter works thanks to the hydraulic power of the excavator and it can be plugged very easily, thanks to the use of common attachment hoses.
BIDIRECTIONAL WITHOUT EXTERNAL DRAINThree models with an operational width of 650, 800 and 1000 mm are available.
our bush cutters series HEAVY are equipped with a couple of “Y” shaped knives and a third located in the middle, which allows it to reduce all the treated material to fine grains.
DA HEAVY - Technical specifications
Model Oil flow rate required
(litres /min)Working width
(mm)Weight
(kg)Weight of the machine
(ton)
DA 62 26 650 160 1,5 - 3
DA 63 36 650 160 1,5 - 3,5
DA 64 44 650 160 2 - 4
DA 83 36 840 220 3 - 4
DA 84 44 840 220 3,5 - 4,5
DA 85 55 840 220 3,5 - 5
DA 13 36 1080 280 3,5 - 4,5
DA 14 44 1080 280 4 - 5
DA 15 55 1080 280 4,5 - 6
The motor is protected by anti-shock valves.
gb -
04/
2014
- 5
00
Ghedini ing. Fabio & C. - Via Canne, 47I 44048 S.M. Codifiume (Ferrara) Italy
tel. +39 0532 857 373 / +39 0532 857 873 - fax +39 0532 28 45 032e-mail: [email protected] - [email protected]
New Hedge TrimmerBT 16
for mini excavators
Without external drain - It cuts branches up to 3 cm diameterCoupling with pins included
BT 16
Oil flow rate Max. pressure Weight Working width Colour
max 40 l/min 180 bar 100 kg 1.500 mm RAL 1028