hydraulic filtration & contamination control products · pvs series – models 185, 600, 1200,...
TRANSCRIPT
Hydraulic Filtration& ContaminationControl Products
Cat.Section: FDHB344UK - High Pressure FiltersJanuary 2007
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Parker HannifinHydraulic Filter Division EuropeFDHB200UK.
• Consistent quality• Technical innovation• Premier customer service
Parkers technical resources provide the correct filtration technologies that conform to your requirements. That’s why thousands of manufacturers and equipment users around the world rely on Parker Filtration products and people.
Worldwide Salesand Service
Parker Filtration’s global reputation as a reliablesupplier of superior filtration products is the resultof a focused and integrated development andmanufacturing system.
Parker Filtration consolidates quality filtrationproducts, manufactured by process filtration, airand gas filtration and separation, fuel conditioningand filtration, hydraulic and lubrication filtration,fluid power products and fluid condition monitoringequipment into one broad-based range thatcovers many markets and most applications, as detailed here.
Hydraulic, Lubrication &Coolant Filtration
High-performance filtrationsystems for productionmachinery in industrial, mobileand military/marine applications.
Compressed Air &Gas Filtration
Complete line of compressedair/gas filtration products;coalescing, particulate andadsorption filters in manyapplications in many industries.
Process & ChemicalFluid Filtration
Liquid filtration systems forbeverage, chemical and foodprocessing; cosmetic, paint,water treatment; photo-processing; and micro-chipfabrication.
Racor Fuel Conditioning& Filtration
Parker air, fuel and oil filtrationsystems provide qualityprotection for engines operatingin any environment, anywherein the world.
System ContaminationMonitoring
On-line dynamic particleanalysis, off-line bottlesampling and fluid analysis andmeasurement of water contentpolluting the oil in a system. All important and achievable,cost-effective solutions availableto equipment manufacturers and end users alike.
Photo courtesy of GLASBAU HAHN.
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Hydraulic Filtration and Contamination Control Products
Contents
Fluid Condition Monitoring and Flowmeters
Filtration and Reservoir Products
1
Indicators Series 159
LaserCM 221Universal Bottle Sampler 229Single Point Sampler 235System 20 Monitors and Sensors 239MCM20 245Icount PD 249H2Oil – Water in Oil Monitor 257MS100 and MS150 Moisture Sensors 261Oilcheck Monitor 269Par-Test™ 273
ReservoirsCo-polymer and steel reservoir solutions 167
Environmental Air FiltersEAB Series 176ABL Series 179
Glass-Filled Nylon Air BreathersIP65 Rated Filler Breathers 184Filler Breathers 186Screw-On Type Air Breathers 187
Metal Filler BreathersFiller Breathers (Metal) 190Lockable Filler Breathers 192
Air FiltersSpin-On Air Breathers 193
Fluid Level IndicationFluid Level Temperature Gauges 197FL Series 202CLS46 203
Fluid Power ProductsSuction Elements 206Diffusers 207Inline Filters 208Drive Couplings 209Multiclamp 211Inline Check Valves 216Single Station Gauge Isolator Valves 21763mm Dia. Pressure Gauges 218100mm Dia. Pressure Gauges 219
15/40/80CN Series 7345M/45M Eco Series (Previously 1145) 81130 Eco Series (Previously 1300) 87
Guardian® 129Filtration Unit 13310MF Series 139PVS Series – Models 185, 600, 1200, 1800 and 2700 143
Par-Gel Water Removal Elements 153
15P/30P Series 95100P Series (Previously H600 and H1000) 10118/28/38P Series 10770/70 Eco Series (Previously 7000) 11522PD/32PD Series 123
Asic ‘Performer’ 277
LoFlow – Oil and Water Flowmeters 280Easiflow – Meters and Flowswitches 281Dataflow – 4 to 20mA and Pulse Output Flow Transmitters 282Dataflow Compact – Inline Flow Transmitter 283Flowline – Oil and Water Calibrated Flowmeters(Brass and Aluminium) 284Flowline – Oil and Water Calibrated Flowmeters(Stainless Steel) 285Flowline – Flowswitches 286Hydraulic Test Equipment 287Flow Products – For Compressed Air Applications 288
1. Low pressure filters
2. Medium pressure filters
3. High pressure filters
4. Portable filtration systems
5. Par-Gel
6. Filter indicators
7. Reservoir equipment
8. Fluid condition monitoring
9. Transducers & transmitters
Guide to Contamination Control 289
11. Guide to contamination control
10. Flowmeters & monitors
ETF Series – Tanktop mounted filters (Previously 1200) 5TTF Series – Tanktop mounted filters 11BGT Series – Tanktop mounted filters 21IN-AGB Series – In-tank mounted filters 33Tanktopper Series I, II & III – Tanktop mounted with integrated air breather 45Suction Return Series – Suction and return filters 53Maxiflow Series – Spin-on filters 61ATZ Series – Suction filters 67
Parker HannifinHydraulic Filter Division EuropeFDHB200UK.Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Hydraulic Filtration and Contamination Monitoring Products
Important changes to our productordering information
Standard Product Tables and a Product Configurator
Parker HannifinHydraulic Filter Division EuropeFDHB200UK.
2
Parker Filtration has recently undertaken a review of its partnumbering with a view to standardising on a common partnumber style for all Filtration products. As a result of the manyacquisitions we have made over the past 10 years, it becameclear to us that there was a need to standardise on a clearformat for our part numbers.
Accordingly, in this new catalogue, you will find the new partnumber system with both a configurator and a supersedescross reference relating to previous part numbers, issued inearlier editions of our generic catalogues. In the event that theprevious reference you use is not shown in this catalogue, couldwe ask you to please contact our European Product InformationCentre. Contact details are on the back of this catalogue.
The examples below using the BGT Series OrderingInformation, are included to explain how the Standardproducts are presented in the Ordering Informationsection of the catalogue and also how the new ProductConfigurator works.
ExplanationExample 1. The Standard Products TableWe have created a new catalogue ordering code and includedin this table are details of these new part numbers.
Alongside this we have put the part number that has beensuperceded from previous catalogues. It is our intention that allitems printed in the Standard Products Table will be availablefrom our central warehouse for ex-stock delivery.
Example 2. The Product Configurator2a. As part of our new catalogue ordering code we haveintroduced an 8-box part number configurator. This
configurator features items, which are marked in bold and areon a shortened delivery time. With this in mind we would askthat when making a selection using the configurator you selectthose items in bold to ensure the shortest lead-time.
2b. The configurator has been designed to cover not only thevarious models we offer but also different micron ratings,indicator options and port connections.
2c. Should you find that what you have selected is notavailable in the configurator, please feel free to call ourEuropean Product Information Centre (EPIC) to see if thatoption can be made available. Contact details are available on the back of this catalogue.
Green shaded graphs and ordering informationWhere pressure drop graphs and ordering information areshown with a green tint, these options are ‘Eco’ options andenvironmentally friendly.
Item is standardItem is standard green optionItem is semi standardItem is non standard
123123123123
Highlights Key (Denotes part number availability)
Note: Standard items are in stock, semi standard items are available within four weeks
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.
Example 2. The Product Configurator Configurator examples filter including LEIF® elementBox 1
Code1112131415161718
Housing3-390 l/min3-500 l/min4-600 l/min4-800 l/min4-1000 l/min4-1500 l/min4-2000 l/min4-2400 l/min
Filter typeBox 2
BGTBox 2
15Box 3
05QLBox 4
BBox 5
S1Box 6
EBox 7
R48Box 8
C
Configurator examples filter including conventional elementBox 1
BGTBox 2
18Box 3
02QBox 4
BBox 5
S4Box 6
EBox 7
3R20Box 8
4
Part number
BGT1210QLBPER323BGT1220QLBPER323BGT1510QLBPER483BGT1520QLBPER483BGT1710QBPER483BGT1720QBPER483
Supersedes
BGTS500-S2 TXWL8C-10 T B15 MBGTS500-S2 TXWL8C-20 T B15 MBGTS1000-S3 TXWL12-10 T B15 MBGTS1000-S3 TXWL12-20 T B15 MBGTS2000-S3 TXW14-10 T B15 MBGTS2000-S3 TXW14-20 T B15 M
Flow(l/min)
5005001000100020002000
Modelnumber
BGT500BGT500BGT1000BGT1000BGT2000BGT2000
Elementlength
Length 12Length 12Length 15Length 15Length 17Length 17
Mediarating (µ)
102010201020
Seals
NitrileNitrileNitrileNitrileNitrileNitrile
Indicator
PluggedPluggedPluggedPluggedPluggedPlugged
Bypasssettings
1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)1.5 Bar (22 Psi)
Includedoptions
Diffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type TDiffuser type T
Replacementelements
937859Q937868Q937862Q937865Q937772Q937805Q
Supersedes
TXWL8L-10TXWL8L-20TXWL12-10TXWL12-20TXW14-10BTXW14-20B
Ports
2"SAE-3000 PSI2"SAE-3000 PSI3"SAE-3000 PSI3"SAE-3000 PSI3"SAE-3000 PSI3"SAE-3000 PSI
BGT
CodeBox 1
CodeBVN
Seal materialNitrileFluorelastomerNeoprene
Seal typeBox 4
CodeBEHX
on request
Bypass valve0.8 bar1.5 bar2.0 bar for BGT-3 seriesBlocked bypassOther bypass settings
Bypass valveBox 6
CodeG1G2S1S2S3S4S5NPP2
on request
Pressure gauge, setting 1.2 bar, M10x1Pressure gauge, setting 1.2 bar, G1/8 for dual port head and TSR seriesPressure switch 42V, 1.2 bar setting, NO/NC, M10x1Pressure switch 42V, 1.2 bar setting, NO with G1/8 BSPPressure switch 42V, 1.2 bar setting, NC with G1/8 BSPPressure switch 250V, NO/NC with G1/8
Pressure switch 220V, NO/NC with M10No indicator, indicator ports not machinedNo indicator, indicator port R pluggedNo indicator, indicator ports L + R pluggedOther settings for indicators / gauges on request
IndicatorBox 5
CodeR32R48
R32M3R20
Ports2" SAE BGT-33" SAE BGT-41x2" SAE flanged + 2x11/4" SAE flanged for BGT-33x11/4" SAE flanges + 1x1/2" SAE for BGT-4
Filter connectionBox 7
Code134
on request568ABCD
on request
OptionsNo diffuser requiredDiffuser type T with perforated plate areaDiffuser type P without perforated plate areaDiffuser with integrated hose connectionNo magnetsDipstickPlugged filling portDiffuser type T and no magnetsDiffuser type P and no magnetsDiffuser type T, no magnets, plugged filling portDiffuser type P, no magnets, plugged filling portOther combinations
OptionsBox 8
Example 1. The Standard Products Table
Note: For all dual head ports for BGTS apply G1/8 connection for indicators
Box 3
Element
Disposable elementLEIF® element
CelluloseNom. rating
10C 20Q20QL
Abs. rating040W10Q
10QL05Q
05QL02Q02QL
Glass fibreMicroglass III (for disposable elements)Ecoglass III (for Leif® elements) Wire mesh
Degree of filtration
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Low Pressure Filters
The Importance of Patented Parker Products to our customers
3
Innovative filter design and patented product protection bringsvalue added benefits to our OEM customers and their end users.
Benefits that should help protect a manufacturers aftermarket as wellas ensure that equipment users specify quality Parker replacementfilter elements and accessories and help safeguard warranties.
Installing Parker Filtration patented filter assemblies such as theSuction and Return Series and LEIF® (Low Environmental ImpactFilter) elements can provide the end user and OEM with somepositive benefits:
• LEIF® can provide increased OEM spares business.• Guaranteed Parker quality with every replacement
filter element.• Supports OEM end user loyalty to Parker elements.• Support aftermarket sales and machinery
performance.• Parker patented elements promote quality and
reliability to end users.
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Hydraulic Filtration and Contamination Monitoring Products
Providing the products and service our customers expect
A Global Product Range
With this catalogue we offer our customers an easy way tofind technical specification and ordering information aboutParker hydraulic filtration, fluid contamination monitoring andfluid power products.
Products shown in this catalogue have a broad range ofapplications. Our filter products are particularly designed for hydraulic and lubrication systems and transmissions. The fluid power products are also used in many industries and applications.
Typical applications can vary from road sweepers, fork lifttrucks, agriculture harvesting machines, grass cuttingequipment, lorry mounted cranes, forestry equipment, pressbrakes, industrial power units, waste management trucks,drilling equipment, marine, military equipment, paper mills,water treatment and filtration systems.
For more information about our products send your inquiry toyour nearest sales location, see contact information at theback of this catalogue.
Important information on product ordering andpart numbersParker Filtration has recently undertaken a review of its partnumbering with a view to standardising on a common partnumber style for all Filtration products. As a result of the manyacquisitions we have made over the past 10 years, it becameclear to us that there was a need to standardise on a clearformat for our part numbers.
Accordingly, in this new catalogue you will find the new partnumber system with a ‘product configurator’ and a supersedesreference relating to previous part numbers issued in earliereditions of our generic catalogues. In the event that theprevious reference you have is not shown in this catalogue,could we ask you to please contact our Epic Centre, details ofwhich are on the back cover of this catalogue.
For additional information and an example explained, turn topage 2.
BSP ports offered in this catalogue conform to ISO228.
Supply chain management, service and supportParker is addressing operation efficiency by expanding thesystematic approach called ‘Lean Manufacturing. Value streamanalysis, flow manufacturing, reduced set-ups, manufacturingcell flexibility and fool-proofing systems are all contributing tothe continuous improvement in our manufacturing sites. ‘Lean’is also expressed in our premier customer service and second-to-none customer partnerships in supply chain management.
Engineering and manufacturing excellenceParker Filtration’s Filter Division Europe (FDE) manufacturingfocus is driven by a number of key elements that affect allareas of the business. People productivity, customersatisfaction, production throughput, quality and leanachievements are the drivers that help the FDE achieveISO9001, QS9000, ISO9001 and ISO14001.
Significant investment by our parent Parker HannifinCorporation continues to give FDE flexible manufacturingsystems, automated test equipment and excellent laboratorytest facilities.
New product development programmes and on-going productimprovement initiatives are vital elements in maintaining aproduct range that meets customer demands for quality,reliability and engineering excellence.
R & D resources at the Parker Filtration locations in the UK,Finland and the Netherlands are both complementary andcomprehensive. Including, as examples, Multipass TestInstallations, fatigue test unit, cleanliness service (waterdetection, special analysis, particle counting and analysis), 3Dworkstations, Thermal Cycle Test Chamber, Salt Spray andHumidity chambers.
Parker Hannifin (UK) Ltd, herewith declares that ParkerHydraulic Filtration products are intended to be incorporatedinto machinery covered by Directive 89/392/EEC, as amendedand that the following harmonised standards have beenapplied; EN982, EN292-1, EN292-2
We furthermore declare that, machinery incorporating ParkerHydraulic Filtration products, is not allowed to be put intoservice until the machinery has been found and declared to bein conformity with the provisions of Directive 89/392/EEC andwith national implementing legislation.
In line with our policy of continuous product improvement,Parker Hannifin (UK) Ltd reserve the right to alter product dataand specification without notice. This does not affect yourstatutory rights.
Parker HannifinHydraulic Filter Division EuropeFDHB200UK.
4
Notes: 1. Within this catalogue, each product has been allocated an operating temperature andpressure range.2. The range listed for each filter is dedicated by the materials of construction and thecapability of the seals specified.3. Consideration should also be given to the characteristics of the system fluid whenspecifying filters for extreme temperature and/or pressure applications.4. The use of non-Parker replacement elements and spares may invalidate your warranty.
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
15P/30P SeriesMAX 200 I/min - 207 bar
High pressure filters95
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
15P/30P SeriesFeatures & Benefits
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 13
96
The Parker Filtration 15P/30P SeriesHigh Pressure Filters.These application examples have one thing incommon...the need for clean hydraulic fluid.
Modern high pressure hydraulic systems aredemanding. Better controls and long componentlife are expected. To deliver the high standards ofperformance, hydraulic components are built withtighter tolerances which increases their sensitivityto contamination.
That’s where Parker pressure filters come into play.They filter out ingressed contamination before itjams a valve or scores a cylinder. They block pumpgenerated debris before it gets to servo orproportional valves. Parker pressure filters are akey ingredient in meeting today’s system demands.
Put your hydraulic systems in the care of ParkerFiltration. We are committed to designing andbuilding the best filters available to industry.
Features
Compact aluminium housing
Two head sizes and two bowllengths
Large ports and wide flow paths
Microglass III replacement elements
Visual, electrical and electronicindicators available
Advantages
Light weight but still robust design
Optimised sizing
Low differential pressure across housing and element
Multi-layered design produced high capacity and efficiency
Wire support reduces pleat bunching, keepsperformance consistent
Check element condition at a glance
Right style for the application
Benefits
Reliable and continuous operation bothin mobile and industrial applications
Efficient filtration
Right filter for each application
Higher flow rates possible
Less lost energy
Great performance value
Reliable performance throughoutelement life
Reduces downtime, maximises element life
Optimise element life, prevent bypassing
Matches your system electricalconnections
Typical Applications
Saw millsAircraft ground support equipmentAsphalt paversHydraulic fan drivesPower steering circuitsDomestic refuse vehiclesCement trucksServo control protectionLogging equipment
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Installation Details
Specification
Pressure ratings:Maximum allowable operating pressure 207 bar.Filter housing pressure pulse fatigue tested: 138 bar.Connections:Inlet and outlet connections are threaded.Connection style Model
15P 30PBSPF(G) 3/4” 1”ISO 6149 M27 M33
Filter housing:Head material extruded aluminium (anodised 6061-T6).Bowl material impacted aluminium (anodised 6061-T6).Seal material:Nitrile or Fluoroelastomer.Operating temperature range:-20°C to +100°C.Bypass valve:Opening pressure 3.5 bar.Filter element:Degree of filtration:Determined by multipass-test according to ISO 16889.
Flow fatigue characteristics:Filter media is supported so that the optimal fatigue life is achieved (ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core. Collapse rating 24 bar (ISO 2941).High collapse elements:High collapse elements available. For details please contact Parker Filtration.Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Weights (kg):Model Length 1 Length 215P 1.6 2.130P 2.9 3.9Fluid compatibility:Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration.
97
Bottom View
64.32.53
23.9.94
49.01.93
155.36.11
15P-1
15P-1
173.5-2.36.83-0.9
50.82.00
Minimumcartridge removal
clearance
Optional 5/16 SAE-5drain porttorque 20-27 Nm(15-20 ft lbs)
Torque 40-48 Nm
Torque 74-95 Nm(55-70 Ft lbs)
101.64.0023.0
.91
50.51.99
46.01.81
79.431.3
Dia.
21.8.86
25.41.000
62.52.46
6.22.25
250.49.86
15P-2268.7–.2.310.58–.09
15P-2
6.8–.13.266–.005
79.4–.133.125–.005
15P Series
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
15P/30P SeriesInstallation Details (cont.)
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 13
98
1 Head2 Bypass assembly3 Element See chart in product configurator4 Bowl O-ring – buna N92138 N92151
Bowl O-ring – fluoroelastomer V92138 V921515 Bowl6 Drain plug – c/w buna seal
Drain plug – c/wFluoroelastomer seal
7 Nameplate10 Blank indicator kit11 Indicators
M3 – Visual auto reset indicator FMUM3KVAU14MT1 – Electrical indicator FMUT1KVAU14MF1 – Electronic indicatorPNP with 4 LED FMUF1KVAU14MF2 – Electronic indicatorNPN with 4 LED FMUF2KVAU14M
Index Description 15P 30P
66.72.63
90.13.55
Torque 74-95 Nm (55-70 Ft lbs)
3.0.12
51.42.02
210.08.27
30P-1 30P-1
229.69.04
Torque 88-95 Nm(65-70 Ft lbs)
Optional str thd drain port5/16 SAE-5 (11/2-20 UNF-2B)Torque 20-27 Nm (15-20 Ft lbs)
101.64.00
Minimumcartridgeremoval
clearance
Side view
69.92.750
34.91.375 10.3
.406dia thru 2 total
19.1.75
31.81.25
Optional mounting bracket (925563)
101.64.000
Port to port
52.32.06
92.13.63
dia
28.81.12
Hex
Bottom view104.84.13
dia
24.4.96
338.813.34
30P-2
75.22.96
319.312.5730P-2
mm(inches)
30P Series
1
2
3
4
5
6
6
5
4
3
1
7
10
11
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Pressure Drop Curves
99
The recommended level of the initial pressure drop is max. 1.2 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:∆p = (∆p30 x viscosity of medium used) / 30 cSt.
15P-1 Elements
15P-2 Elements
15P Empty Housing
25
20
15
5
0
10
Flow (US GPM)
Flow (l/min)20 40 60
0.0
∆p (b
ar)
0.5
1.0
1.5
0
10 15 20 2550
80 100
02Q
05Q
20Q
10Q
∆p (P
SID
)
∆p (b
ar)
0 20 40 60 80
Flow (l/min)
Flow (US GPM)
∆p (P
SID
)
0 5 10 15 20 2525
20
15
10
5
0
1.5
1.0
0.5
0.0
15P-115P-2
25
20
15
5
0
10
Flow (US GPM)
Flow (l/min)20 40 60
0.0
∆p (b
ar)
0.5
1.0
1.5
0
10 15 20 2550
80 100
02Q
05Q
20Q10Q
∆p (P
SID
)
30P-1 Elements
30P Empty Housing
25
20
15
5
0
10
Flow (US GPM)
∆p (P
SID
)
Flow (l/min)
0.0
∆p (b
ar)
0.5
1.0
1.502Q
05Q
20Q
10Q
0 13 26 66
50 100 2502000
53
150 300
39 79
∆p (b
ar)
0 50 100 150 200
Flow (l/min)
Flow (US GPM)
∆p (P
SID
)
0 10 20 40 50 6025
20
15
10
5
0
1.5
1.0
0.5
0.0
30P-130P-2
30
30P-2 Elements
25
20
15
5
0
10
Flow (US GPM)
∆p (P
SID
)
Flow (l/min)
0.0
∆p (b
ar)
0.5
1.0
1.5
02Q
05Q
20Q
10Q
0 13 26 66
50 100 2502000
53
150 300
39 79
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
15P/30P SeriesOrdering Information
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 13
100
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.
Part number
15P110QBM3KG12115P110QBT1KG12115P210QBM3KG12115P210QBT1KG12130P110QBM3KG16130P110QBT1KG16130P210QBM3KG16130P210QBT1KG161
Supersedes
15P-1-10Q-M2-50-B2B2-115P-1-10Q-TW3-50-B2B2-115P-2-10Q-M2-50-B2B2-115P-2-10Q-TW3-50-B2B2-130P-1-10Q-M2-50-C2C2-130P-1-10Q-TW3-50-C2C2-130P-2-10Q-M2-50-C2C2-130P-2-10Q-TW3-50-C2C2-1
Flow(l/min)
45457070120120170170
Modelnumber
15P15P15P15P30P30P30P30P
Elementlength
Length 1Length 1Length 2Length 2Length 1Length 1Length 2Length 2
Mediarating (µ)
1010101010101010
Seals
NitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrile
Indicator
VisualElectrical
VisualElectrical
VisualElectrical
VisualElectrical
Bypasssettings
3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar
Replacementelements
939102Q939102Q939106Q939106Q939110Q939110Q939114Q939114Q
Ports
G3/4"G3/4"G3/4"G3/4"G1"G1"G1"G1"
Product configuratorBox 1
Code1 2
LengthLength 1Length 2
Filter typeBox 2
15PBox 2
1Box 3
10QBox 4
BBox 5
M3Box 6
KBox 7
G12Box 8
1
CodeBV
Seal materialNitrileFluoroelastomer
Seal typeBox 4
Bypass valve3.5 bar
Bypass and indicator settingsIndicator
2.5 barCode
K
Box 6
CodeP
M3T1NF1F2F3F4
Plugged with steel plugVisual indicatorElectrical indicatorNo indicator portElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.
IndicatorBox 5
CodeG12M27G16M33
Connections15P: Thread G3/4
Thread M27, ISO 614930P: Thread G 1
Thread M33, ISO 6149
Filter connectionBox 7
Code14
OptionsStandardDrain port on bowl
OptionsBox 8
Code15P30P
ModelHigh pressure filter, T-portHigh pressure filter, T-port
CodeBox 1
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Media02Q05Q10Q20Q
Replacement elements with nitrile seals15P-1
939100Q939101Q939102Q939103Q
15P-2939104Q939105Q939106Q939107Q
30P-1939108Q939109Q939110Q939111Q
30P-2939112Q939113Q939114Q939115Q
Filter model15P-115P-230P-130P-2
Nominal flow (I/min) at viscosity 30 cSt02Q254070120
05Q306090150
10Q4570120170
20Q7090170200
When filter includes a bypass valve but not an indicator,code denotes bypass setting.
Item is standardItem is standard green optionItem is semi standardItem is non standard
123123123123
Highlights Key (Denotes part number availability)
Note: Standard items are in stock, semi standard items are available within four weeks
Box 3
Element media
Microglass III element 20Q10Q05Q02Q
Glass fibreMedia code
Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c]
% efficiency, based on the above beta ratio (ßx)ßx(c)=2
50.0%N/AN/AN/A6
Degree of filtrationCode
ßx(c)=10
90.0%N/AN/A611
ßx(c)=75
98.7%N/A4.58.517
ßx(c)=100
99.0%N/A5918
ßx(c)=200
99.5%N/A61020
ßx(c)=1000
99.9%4.571222
02Q05Q10Q20Q
DisposableMicroglass III
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
100P SeriesMAX 1000 I/min - 414 bar
High pressure filters101
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
100P Series
Typical Applications
Drilling rigsPower packsOil/gas industryFlight simulatorsTest rigs
The Parker Filtration Model 100P High Pressure Filters.The 100P Series is designed to meet the growingdemand for high-pressure filters with a flow rate capacityof up to 1000 l/min at 414 bar working pressure. For systems where reverse flow can be expected, anoptional integrated reverse flow valve avoids back washof contamination. When changing the element, only theend cap of the bowl has to be removed. The filter isideal for applications where space is at a premium. Thefilter media used in the elements is high qualityMicroglass III glass fibre.
Features & Benefits
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 14
102
Features
High 414 bar pressure rating
Flow rates up to 1000 l/min
Optional reverse flow valve
Bottom access bowl
Microglass III replacement elements
Visual and electrical indicatorsavailable
Advantages
Strong and robust housing for heavy dutyapplications
Pressure filtration possible for high flow rates
Allows reverse flow and prevents back wash of element
Only bottom of the bowl must be opened forelement change
Multi-layered design produced high capacity and efficiency
Wire support reduces pleat bunching, keepsperformance consistent
Check element condition at a glance
Right style for the application
Benefits
Reliable and continuous operation foropen and closed loop applications
Excellent protection of highperformance machinery
Ideal for applications where back flowis expected
Easy service
Great performance value
Reliable performance throughoutelement life
Reduces downtime, maximises element life
Optimises element life, preventsbypassing
Matches your system electricalconnections
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
1
2
3/3A
3/3A
4
5
6
7
8
9
1013
11
12
14
15
Ø169
Ø125
Ø145
Ø145
107.
510
588
35
235
15
SAE 646 A/F
Min
imum
ele
men
tcl
eara
nce
330/
580
L1=
563
L2=
813
10055A/F
High pressure filters
Installation Details
Specification
Pressure ratings:Maximum allowable operating pressure 414 bar.Filter housing pressure pulse fatigue tested: 3*106 pulses 0 - 276 bar.Connections:Inlet and outlet connections are threaded internally or flange faced.Threads G11/2", G2" (ISO 228/1), SAE 24, SAE 32.or flanges 11/2" SAE 6000, 2" SAE 6000, 11/2" SAE 6000-M, 2" SAE 6000-M.*6000-M is a SAE style with appropriate metric fixing threads.Filter housing:Head material cast iron (GSI).Bowl material extruded steel, max torque 200 Nm.Seal material:Nitrile or Fluoroelastomer.Operating temperature range: - 20°C to +100°C.Bypass valve:Opening pressure 7.0 bar.Options:Reverse flow valve, which directs back flow from port to port.
Filter element:Degree of filtration:Determined by Multipass-test according to ISO 16889.Flow fatigue characteristics:Filter media is supported so that the optimal fatigue life is achieved (ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap material reinforced composite and metal inner core. Collapse rating 20 bar (ISO 2941).High collapse elements:High collapse elements available. For details please contact Parker Filtration.Indicator options:Indicating differential pressure: 5.0 bar.- visual indicator.- electrical indicator.Weights (kg):100P-1: 37 kg.100P-2: 47 kg.Fluid compatibility:Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration.
103
1 Filter head2 Filter element3 Bowl seal
3A Bowl back-up ring4 Housing5 Cover6 Indicator seal7 Bypass set8 Visual indicator9 Electrical indicator10 Bypass seal11 Reverse flow set12 Adaptor13 Adaptor/reverse flow seal14 Cover seal15 Drain plug16 Mounting clamp
Type H model 1000
Steel (Zinc plated)
M12x75(2x)(81.21.022.20)
188
138100
EPDM
2.5
Ø125
70
3
308
13
3
Mounting Clamp Item 16
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
100P SeriesAdditional Information
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 14
104
Flow (l/min)
∆p (b
ar)
0
0.2
0.4
0.6
0.8
1
1.2
1.6
1.4
2
1.8
0 100 200 300 400 500 600 700 800
RFV
Flow (US GPM)
159132 185 21179 106260 53
∆p (P
SID
)
02.95.8
11.68.7
14.517.420.323.226.129
Normalhousing
Flow (l/min)
∆p (b
ar)
0
0.2
0.4
0.6
0.8
1
1.2
1.6
1.4
2
1.8
0 100 200 300 400 500 600 700 800
Flow (US GPM)
159132 185 21179 106260 53
∆p (P
SID
)
02.95.8
11.68.7
14.517.420.323.226.129
02Q
05Q10Q
20Q
100P-1 Empty Housing (G11/2”, SAE 24, SAE 11/2”)
100P-1 Elements
Flow (l/min)
∆p (b
ar)
0
0.2
0.4
0.6
0.8
1
1.2
1.6
1.4
2
1.8
0 100 200 300 400 500 600 700 800 900 1000
RFV
Flow (US GPM)
159132 211185 238 26479 106260 53∆p
(PS
ID)
02.95.8
11.68.7
14.517.420.323.226.129
Normalhousing
Flow (l/min)
∆p (b
ar)
0
0.2
0.4
0.6
0.8
1
1.2
1.6
1.4
2
1.8
0 100 200 300 400 500 600 700 800 900 1000
Flow (US GPM)
159132 211185 238 26479 106260 53
∆p (P
SID
)
02.95.8
11.68.7
14.517.420.323.226.129
02Q
05Q
10Q
20Q
100P-2 Empty Housing (G2”, SAE 32, SAE 2”)
100P-2 Elements
Circuit symbol
Filter withReverse Flow Valve
Normal Flow Condition
Reverse Flow Condition
Valve housing
Valve housing
Sleeve
Central stem
Pressure Drop Curves
The recommended level of the initial pressure drop is max. 2.3 bar.If the medium used has a viscosity different from 30 cSt, pressure drop can be estimated as follows:The total ∆p = housing ∆ph + (element ∆pe x working viscosity/30).
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Ordering Information
105
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.
Part number
100P105QBM4MF241100P110QBM4MF241100P120QBM4MF241100P205QBM4MF321100P210QBM4MF321100P220QBM4MF321
Supersedes
1074A.2HN70.FZ12101074A.2HN70.FZ12201074A.2HN70.FZ12301074A.2HN70.TZ22101074A.2HN70.TZ22201074A.2HN70.TZ2230
Flow(l/min)
6007008008409201000
Modelnumber
100P100P100P100P100P100P
Elementlength
Length 1Length 1Length 1Length 2Length 2Length 2
Mediarating (µ)
5102051020
Seals
NitrileNitrileNitrileNitrileNitrileNitrile
Indicator
VisualVisualVisualVisualVisualVisual
Bypasssettings
7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar
Replacementelements
939061Q939062Q939063Q939065Q939066Q939067Q
Supersedes
1070Z121A1070Z122A1070Z123A1070Z221A1070Z222A1070Z223A
Ports
SAE flange 11/2" 6000SAE flange 11/2" 6000SAE flange 11/2" 6000SAE flange 2" 6000SAE flange 2" 6000SAE flange 2" 6000
Product configuratorBox 1
Code1 2
LengthLength 1Length 2
Filter typeBox 2
100PBox 2
2Box 3
10QBox 4
BBox 5
M4Box 6
MBox 7
F32Box 8
1
CodeBV
Seal materialNitrileFluoroelastomer
Seal typeBox 4
Bypass valve7.0 bar
Bypass and indicator settingsIndicator
5.0 barCode
M
Box 6
CodeP
M4T2T3T4T5
Indicator port pluggedVisual indicatorElectrical indicatorElectrical indicator with red lamp 28 Vdc, N.O.Electrical indicator with red lamp 110 VAC, N.O.Electrical indicator with red lamp 250 VAC, N.O.
IndicatorBox 5
CodeG24G32S24S32F24H24F32H32
ConnectionsThread G 11/2
Thread G 2Thread SAE 24Thread SAE 32SAE flange 11/2" 6000SAE flange 11/2" 6000-MSAE flange 2" 6000SAE flange 2" 6000-M
Filter connectionBox 7
Code13
OptionsStandardReverse flow valve
OptionsBox 8
Code100P
ModelLarge HP filter, L-port
CodeBox 1
Standard products table
Media02Q05Q10Q20Q
Replacement elements with nitrile sealsLength 1939060Q939061Q939062Q939063Q
Length 2939064Q939065Q939066Q939067Q
Filter port size100P-1, 11/2"100P-2, 2"
Nominal flow (I/min) at viscosity 30 cSt02Q540700
05Q600840
10Q700920
20Q8001000
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Seal kit (nitrile) order code: 8069000070Mounting clamp order code: 84.47.265.01
When filter includes a bypass valve but not an indicator,code denotes bypass setting.
Average filtration beta ratio ß (ISO 16889) / particle size µm [c]
% efficiency, based on the above beta ratio (ßx)ßx(c)=2
50.0%N/AN/AN/A6
Degree of filtrationCode
ßx(c)=10
90.0%N/AN/A611
ßx(c)=75
98.7%N/A4.58.517
ßx(c)=100
99.0%N/A5918
ßx(c)=200
99.5%N/A61020
ßx(c)=1000
99.9%4.571222
02Q05Q10Q20Q
DisposableMicroglass III
Box 3
Element media
Microglass III element 20Q10Q05Q02Q
Glass fibreMedia code
Degree of filtration
Item is standardItem is standard green optionItem is semi standardItem is non standard
123123123123
Highlights Key (Denotes part number availability)
Note: Standard items are in stock, semi standard items are availablewithin four weeks
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
18/28/38P SeriesMAX 700 I/min - 414 bar
High pressure filters107
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
18/28/38P Series
Typical Applications
Injection mouldingDie castingServo controlsMachine toolsMobile equipment
The Parker Filtration 18/28/38P SeriesHigh Pressure FiltersParker Filtration engineered the 18/28/38P series of high pressure filtersto satisfy demanding applications in the mobile and industrial marketsthroughout the world. With metric mounting and optional ISO 6149ports, this new series is truly a global design.
Installed downstream of the pump, this new series with their wide rangeof high capacity Microglass III elements, offer excellent protection tosystem components.
Standard filters come complete with industry proven spool type bypassvalve. For more critical applications such as servo or proportionalcontrols, a no bypass high strength element combination ensuresmaximum protection.
The modular low hysteresis differential pressure indicator fitted to thisseries is unrivaled in its performance. Tests prove its accuracy andfoolproof design to be a major advance in indicator technology.
Features & Benefits
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 15
108
Features
Fatigue tested to full pressure rating
Several head sizes
Several connection options
Microglass III replacement elements
Visual, electrical and electronicindicators available
Advantages
Strong and robust housing for heavy dutyapplications
Optimised sizing
Easy mounting
Multi-layered design produced high capacity andefficiency
Wire support reduces pleat bunching, keepsperformance consistent
Check element condition at a glance
Right style for the application
Benefits
Reliable and continuous operation bothin mobile and industrial applications
Efficient filtrationCovers wide flow range
Global design, global acceptanceRight filter for each application
Great performance valueReliable performance throughoutelement lifeReduces downtime, maximises element lifeOptimises element life, preventsbypassingMatches your system electricalconnections
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
18P 28P 38P
B C
Torque22-27Nm
(15-20 ft/lbs)
A Length 1
A Length 2
Hex. E
Bowl removalF
CB
A Length 1
A Length 2
Bowl removalF
Hex.
Torque35-40 Nm
(25-30 ft/lbs)
B C
A Length 1
A Length 2
Bowl removalF
Torque80-95 Nm
(60-70 ft/lbs)
Hex.
K
H
J
LN
M
15°
4 mounting holes (P)
G
H
J
K
LM
N
4 mounting holes (P)
15°R30 R3
5
G
JH
NM
15°
LK
4 mounting holes (P)
mm(inches)
D DD
G
R38
EE
High pressure filters
Specification
Pressure ratings:Maximum allowable operating pressure 414 bar.Filter housing pressure pulse fatigue tested: 106 pulses 0 - 414 bar.Connections:Inlet and outlet connections are threaded internally or flange faced.Connection style Model
18P 28P 38PBSPF(G) 3/4” 1” 11/4”, 11/2”SAE 12 16 20, 24ISO 6149 M27 M33 M42, M48Flange SAE 6000 3/4” 1” 11/4”Flange SAE 6000-M* 3/4” 1” 11/4”*6000-M is a SAE style with appropriate metric fixing threads.Filter housing:Head material cast iron (GSI).Bowl material steel.Seal material:Nitrile or Fluoroelastomer.Operating temperature range:-20°C to +100°C.Bypass valve & indicator settings:Table below gives bypass valve and corresponding indicator setting.Bypass Indicator3.5 bar 2.5 bar7.0 bar 5.0 bar
109
Filter element:Degree of filtration:Determined by multipass-test according to ISO 16889.Flow fatigue characteristics:Filter media is supported so that the optimal fatigue life is achieved (ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap material reinforcedcomposite and metal inner core. Collapse rating 20 bar (ISO 2941).High collapse elements:(To be used when no bypass function in filter housing).Microglass III media supported with epoxy coated metal wire mesh onupstream and stainless steel on downstream, end cap material steel.Strong metal inner core. Collapse rating 210 bar (ISO 2941).Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar or 5.0 ± 0.5 bar.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Weights (kg):Model Length 1 Length 218P 4.2 5.728P 6.7 9.238P 15.8 20.3Fluid compatibility:Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration.
Model
198(7.79)293
(11.53)228
(8.97)337
(13.26)329
(12.95)448
(17.64)
32(1.26)
40(1.57)
44(1.73)
26(1.02)
29(1.14)
35(1.38)
75(2.95)
93(3.66)
128(5.04)
24(0.94)
24(0.94)
36(1.42)
100(3.94)
98(3.86)
120(4.72)
160(6.30)
40(1.57)
55(2.16)
50(1.97)
20(0.79)
27.5(1.07)
25(0.98)
80(3.15)
90(3.54)
120(4.72)
40(1.57)
45(1.77)
60(2.36)
55(2.16)
62(2.44)
81(3.19)
110(4.33)
124(4.88)
162(6.38)
M8 x 1.25x12
deep
M10 x 1.5x11
deep
M10 x 1.5x12
deep
18P-1
18P-2
28P-1
28P-2
38P-1
38P-2
A B C D E F G H J K L M N P(A/F)
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
18/28/38P SeriesFlange Face Details
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 15
110
Modelmm (inches)
11.9
(0.47)
14
(0.55)
15.7
(0.62)
23.8
(0.94)
27.8
(1.09)
31.7
(1.25)
25.4
(1.00)
28.0
(1.10)
33.0
(1.30)
50.8
(2.0)
57.1
(2.25)
66.7
(2.62)
M10 x 1.5-6H x 18 Deep
M12 x 1.75-6H x 20 Deep
M14 x 2-6H x 20 Deep
3/8-16 UNC-2B x 18 deep
7/16-14 UNC-2B x 20 deep
1/2-13 UNC-2B x 20 deep
19.0
(0.75)
25.4
(1.0)
31.8
(1.25)
18P (3/4”)
28P (1”)
38P (11/4”)
A B C D E F G
C
D
AB
ØG
Thread E metricF SAE
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Pressure Drop Curves
111
18P-1 Empty Housing and High Collapse
28P-1 Elements
18P-1 Elements
18P-2 High Collapse Elements
28P-2 Elements
43.5
29.0
0
1150 21
Flow (US GPM)
Flow (l/min)20 6040 120 14010080
0.0
∆p (b
ar)
20Q1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
16
14.5
∆p (P
SID
)
10Q
05Q02Q
160
26 32 37 42
Empty Housing
43.5
29.0
0
1150 21
Flow (US GPM)
Flow (l/min)20 6040 120 14010080
0.0
∆p (b
ar)
20Q1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
16
14.5
∆p (P
SID
)
10Q
05Q
02Q
160
26 32 37 42
43.5
29.0
0
0 13 26 66
Flow (US GPM)
Flow (l/min)50 100 250200
0.0
∆p (b
ar)
20Q1.0
2.0
3.0
0
0.5
1.5
2.5
53
14.5
∆p (P
SID
)
10Q
05Q
02Q
150 300
39 79
43.5
29.0
0
1150 21
Flow (US GPM)
Flow (l/min)20 6040 120 14010080
0.0
∆p (b
ar)
20Q1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
16
14.5
∆p (P
SID
)
10Q05Q
02Q
160
26 32 37 42
18P-2 Elements
43.5
29.0
0
1150 21
Flow (US GPM)
Flow (l/min)20 6040 120 14010080
0.0∆p
(bar
)20Q
1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
16
14.5
∆p (P
SID
)
10Q
05Q
02Q
160
26 32 37 42
43.5
29.0
0
0 13 26 66
Flow (US GPM)
Flow (l/min)50 100 250200
0.0
∆p (b
ar)
20Q1.0
2.0
3.0
0
0.5
1.5
2.5
53
14.5
∆p (P
SID
)
10Q05Q
02Q
150 300
39 79
28P-1 Empty Housing and High Collapse 28P-2 High Collapse Elements
43.5
29.0
0
0 13 26 66
Flow (US GPM)
Flow (l/min)50 100 250200
0.0
∆p (b
ar)
20QH
1.0
2.0
3.0
0
0.5
1.5
2.5
53
14.5
∆p (P
SID
)
10QH05QH02QH
150 300
39 79
Empty Housing
43.5
29.0
0
0 13 26 66
Flow (US GPM)
Flow (l/min)50 100 250200
0.0
∆p (b
ar) 20QH
1.0
2.0
3.0
0
0.5
1.5
2.5
53
14.5
∆p (P
SID
)
10QH05QH02QH
150 300
39 79
With 3.5 bar bypass the recommended initial pressure drop is max 1.2 bar.With 7.0 bar bypass the recommended initial pressure drop is max 2.3 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:The total ∆p = housing ∆ph + (element ∆pe x working viscosity/30).
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
18/28/38P Series
Element Service
Pressure Drop Curves (cont.)
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 15
112
38P-1 Empty Housing and High Collapse
38P-1 Elements
38P-2 High Collapse Elements
43.5
29.0
0
132
Flow (US GPM)
Flow (l/min)100 200 500400
0.0
∆p (b
ar) 20Q
1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
106
14.5
∆p (P
SID
)
10Q05Q
02Q
300
7953260 185159
700600
Empty Housing
43.5
29.0
0
132
Flow (US GPM)
Flow (l/min)100 200 500400
0.0
∆p (b
ar) 20Q
1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
106
14.5
∆p (P
SID
)
10Q05Q
02Q
300
7953260 185159
700600
43.5
29.0
0
132
Flow (US GPM)
Flow (l/min)100 200 500400
0.0
∆p (b
ar)
20Q1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
106
14.5
∆p (P
SID
)
10Q
05Q02Q
300
7953260 185159
700600
38P-2 Elements
43.5
29.0
0
132
Flow (US GPM)
Flow (l/min)100 200 500400
0.0
∆p (b
ar)
20Q
1.0
2.0
3.0
3.5
0
0.5
1.5
2.5
106
14.5
∆p (P
SID
)
10Q
05Q
02Q
300
7953260 185159
700600
A. Stop the system’s power unit.B. Relieve any system pressure in the filter line.C. Drain the filter bowl if drain port option is provided.D. Rotate the bowl clockwise (left) and remove.E. Remove element by pulling downward with a
slight twisting motion and discard.F. Check bowl o-ring and anti-extrusion ring for
damage and replace if necessary.G. Lubricate element o-ring with system fluid and
locate element in filter head.H. Install bowl by rotating counter-clockwise (right)
and tighten to specified torque.18P - 22-27 Nm (16-20 ft. lbs.)28P - 35-40 Nm (25-30 ft. lbs.)38P - 80-95 Nm (60-70 ft. lbs.)
I. Confirm there are no leaks after powering the system.
Head AssemblyElementBowlIndicatorsM3 – Visual auto reset; 2.5 barM3 – Visual auto reset; 5.0 barT1 – Electrical; 2.5 bar with
DIN 43650 ConnectorT1 – Electrical; 5.0 bar with
DIN 43650 ConnectorF1 – Electronic PNP; 2.5 bar with 4 LEDF2 – Electronic NPN; 2.5 bar with 4 LEDF1 – Electronic PNP; 5.0 bar with 4 LEDF2 – Electronic NPN; 5.0 bar with 4 LEDBowl SealBowl Anti-extrusion RingSeal KitsSeal kit 18P (std) – NitrileSeal kit 18P (F3) – FluoroelastomerSeal kit 28P (std) – NitrileSeal kit 28P (F3) – FluoroelastomerSeal kit 38P (std) – NitrileSeal Kit 38P (F3) – Fluoroelastomer
see table on next page
S04350S04351S04352S04353S04354S04355
123
4
5
67
Index Description Part number
Parts List
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
6
7
2
1
5 4
High pressure filters
Element Service (cont.)
113
Replacement element part numbers
18P-1G04242G04243G04244G04245G04290G04291G04292G04293
18P-2G04250G04251G04252G04253G04298G04299G04300G04301
28P-1G04258G04259G04260G04261G04306G04307G04308G04309
28P-2G04266G04267G04268G04269G04314G04315G04316G04317
38P-1G04274G04275G04276G04277G04322G04323G04324G04325
38P-2G04282G04283G04284G04285G04330G04331G04332G04333
Model02Q05Q10Q20Q
02QH05QH10QH20QH
Elements with Nitrile seals
18P-1G04246G04247G04248G04249G04294G04295G04296G04297
18P-2G04254G04255G04256G04257G04302G04303G04304G04305
28P-1G04262G04263G04264G04265G04310G04311G04312G04313
28P-2G04270G04271G04272G04273G04318G04319G04320G04321
38P-1G04278G04279G04280G04281G04326G04327G04328G04329
38P-2G04286G04287G04288G04289G04334G04335G04336G04337
Model02Q05Q10Q20Q
02QH05QH10QH20QH
Elements with Fluoroelastomer seals
Ordering Information
Note: Filter assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.
Part number
18P110QBT1MG12118P110QBM3MG12118P120QBT1MG12118P120QBM3MG12118P210QBT1MG12118P210QBM3MG12118P220QBT1MG12118P220QBM3MG12128P110QBT1MG16128P110QBM3MG16128P120QBT1MG16128P120QBM3MG16128P210QBT1MG16128P210QBM3MG16138P110QBT1MG20138P110QBM3MG20138P120QBT1MG20138P120QBM3MG20138P210QBT1MG20138P210QBM3MG20138P220QBT1MG20138P220QBM3MG201
Supersedes
18P-1-10Q-TW6-98-B2B2-118P-1-10Q-M2-98-B2B2-118P-1-20Q-TW6-98-B2B2-118P-1-20Q-M2-98-B2B2-118P-2-10Q-TW6-98-B2B2-118P-2-10Q-M2-98-B2B2-118P-2-20Q-TW6-98-B2B2-118P-2-20Q-M2-98-B2B2-128P-1-10Q-TW6-98-C2C2-128P-1-10Q-M2-98-C2C2-128P-1-20Q-TW6-98-C2C2-128P-1-20Q-M2-98-C2C2-128P-2-10Q-TW6-98-C2C2-128P-2-10Q-M2-98-C2C2-138P-1-10Q-TW6-98-D2D2-138P-1-10Q-M2-98-D2D2-138P-1-20Q-TW6-98-D2D2-138P-1-20Q-M2-98-D2D2-138P-2-10Q-TW6-98-D2D2-138P-2-10Q-M2-98-D2D2-138P-2-20Q-TW6-98-D2D2-138P-2-20Q-M2-98-D2D2-1
Flow(l/min)
8080100100130130150150120120150150250250340340420420560560700700
Modelnumber
18P18P18P18P18P18P18P18P28P28P28P28P28P28P38P38P38P38P38P38P38P38P
Elementlength
Length 1Length 1Length 1Length 1Length 2Length 2Length 2Length 2Length 1Length 1Length 1Length 1Length 2Length 2Length 1Length 1Length 1Length 1Length 2Length 2Length 2Length 2
Mediarating (µ)
10102020101020201010202010101010202010102020
Seals
NitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrile
Indicator
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
ElectricalVisual
Bypasssettings
7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar7.0 bar
Replacementelements
G04244 G04244 G04245 G04245 G04252 G04252 G04253 G04253 G04260 G04260 G04261 G04261 G04268 G04268 G04276 G04276 G04277 G04277 G04284 G04284 G04285 G04285
Ports
G3/4"G3/4"G3/4"G3/4"G3/4"G3/4"G3/4"G3/4"G1"G1"G1"G1"G1"G1"
G11/4"G11/4"G11/4"G11/4"G11/4"G11/4"G11/4"G11/4"
Standard products table
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 15
114
High Pressure Filters
18/28/38P SeriesOrdering Information (cont.)
Product configuratorBox 1
Code1 2
LengthLength 1Length 2
Filter typeBox 2
38PBox 2
1Box 3
10QBox 4
BBox 5
M3Box 6
MBox 7
G20Box 8
1
CodeBV
Seal materialNitrileFluoroelastomer
Seal typeBox 4
Bypass valve3.5 bar7.0 barNo bypassNo bypass
Bypass and indicator settingsIndicator
2.5 bar5.0 bar5.0 bar
No indicator+ Box 8: code 2+ Box 8: code 2
CodeKMMX
Box 6
CodeN
M3T1PF1F2F3F4
No indicator portVisual indicatorElectrical indicatorPlugged with steel plugElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.
IndicatorBox 5
Code12
OptionsStandardNo bypass
OptionsBox 8
Code18P28P38P
ModelSmall size high pressure filter, T-portMedium size high pressure filter, T-portLarge size high pressure filter, T-port
CodeBox 1
CodeG12S12M27H12F12G16S16M33H16F16G20G24S20S24M42M48H20F20
Ports18P: Thread G 3/4
Thread SAE 12Thread M27, ISO 6149SAE flange 3/4" 6000-MSAE flange 3/4" 6000
28P: Thread G 1 Thread SAE 16Thread M33, ISO 6149SAE flange 1" 6000-MSAE flange 1" 6000
38P: Thread G 1 1/4
Thread G 1 1/2
Thread SAE 20Thread SAE 24Thread M42, ISO 6149Thread M48, ISO 6149SAE flange 1 1/4" 6000-MSAE flange 1 1/4" 6000
Filter connectionBox 7
Filter model18P-118P-228P-128P-238P-138P-2
Nominal flow (I/min) at viscosity 30 cSt02Q357080140140320
05Q60110100200220440
10Q80130120250340560
20Q100150150300420700
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
When filter includes a bypass valve but not an indicator,code denotes bypass setting.
Item is standardItem is standard green optionItem is semi standardItem is non standard
123123123123
Highlights Key (Denotes part number availability)
Note: Standard items are in stock, semi standard items are available within four weeks
Box 3
Element media
Microglass III elementHigh collapse element
20Q20QH
10Q 10QH
05Q05QH
02Q02QH
Glass fibreMedia code
Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c]
% efficiency, based on the above beta ratio (ßx)ßx(c)=2
50.0%N/AN/AN/A6
Degree of filtrationCode
ßx(c)=10
90.0%N/AN/A611
ßx(c)=75
98.7%N/A4.58.517
ßx(c)=100
99.0%N/A5918
ßx(c)=200
99.5%N/A61020
ßx(c)=1000
99.9%4.571222
02Q05Q10Q20Q
DisposableMicroglass III
02QH05QH10QH20QH
High collapseelement
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
70/70 Eco SeriesMAX 450 I/min - 420 bar
High pressure filters
FEATURING
115
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
70/70 Eco Series
Typical Applications
Forestry equipmentIndustrial power unitsPulp and paperPort handling equipmentMining and quarryingequipment
The Parker Filtration 70/70 Eco Series High Pressure Filters.High quality 420 bar in-line pressure filters designed tooffer high levels of protection at flows up to 450 l/min.
Dirt sensitive systems can be protected with confidenceusing the 70 Series high pressure filters.
The 70 Series also available with environmentallyfriendly Ecoglass III elements.
Features & Benefits
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 16
116
Features
Fatigue tested to full pressure rating
Several head options andconnection sizes
Several bowl lengths
Microglass III replacement elements
Coreless Ecoglass III replacementelements
Visual, electrical and electronicindicators available
Advantages
Strong and robust housing for heavy dutyapplications
Easy mounting
Optimised sizing
Multi-layered design produced high capacity andefficiency
Wire support reduces pleat bunching, keepsperformance consistent
No metal content in elementReduced overall weight of 50%Easy compaction of used elementsEco adaptors available
Check element condition at a glance
Right style for the application
Benefits
Reliable and continuous operation bothin mobile and industrial applications
Reduced space and pipingRight filter for each application
Efficient filtration
Great performance valueReliable performance throughoutelement lifeReduces downtime, maximises element lifeEnvironmentally friendly disposal byincinerationLower element replacement costsLower disposal costsRetrofit coreless design to housingsalready installed
Optimise element life, prevent bypassing
Matches your system electricalconnections
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Specification
Pressure ratings:Maximum allowable operating pressure 420 bar. Filter housing pressure pulse fatigue tested: 106 pulses 0 - 414 bar.
Connections:Threads G1, G11/4, G11/2 (ISO 228/1).or flanges 11/4" SAE 3000-M, 11/2" SAE 3000-M, 11/4" SAE 6000-M,11/2" SAE 6000-M.
Filter housing:Head material cast iron (GSI). Bowl material steel. Max torque 40 Nm.
Seal material:Nitrile or Fluoroelastomer.
Operating temperature range:- 20°C to +100°C.
Bypass valve:Opening pressure 3.5 bar.
Filter element:Degree of filtration:Determined by Multipass-test according to ISO 16889.
Flow fatigue characteristics:Filter media is supported so that the optimal fatigue life is achieved(ISO 3724).
Microglass III:Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core. Collapse rating 20 bar (ISO 2941).
Ecoglass III:Supported with plastic net, end cap material reinforced composite. No metal parts.Collapse rating 10 bar (ISO 2941).Filter element can only be used together with reusable FEA Eco-adapter. Note: Ecoglass III contributes to ISO 14001 quality.
High collapse elements:(To be used when no bypass function in filter housing).Microglass III media supported with epoxy coated metal wire mesh on upstream and stainless steel on downstream, end cap materialsteel. Strong metal inner core. Collapse rating 210 bar (ISO 2941).
Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar or 7.0 ± 0.5 bar.2.5 bar indicators to be used with 3.5 bar bypass valve and 7.0 bar indicators with no bypass function.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.
Fluid compatibility:Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration.
117
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
70B 70T 70L
62(2.44)
129(5.08)
B
41 HEX
A
Out
In
D
43(1.69)
M10 depth 20 (0.78)
Housing for SAE flangemounting doesn’t havethese holes
Out InD DOptionplug G1/4
Option plug M12x1.5
M10 depth 10
Vent port
∆p indicator
32(1.25)
140
4 mounting holes 21 dia.
Outlet
O-ring size 220
52(2.04)
190(7.48)
58(2.28)
B
Inlet
60(2.36)
41 HEX(1.61)
144
(5.6
7)
100
(3.9
4)
56(2.20)
41 HEX
D
142
(5.6
0)
mm
(inches)
95(3.74)
43(1.69)
High Pressure Filters
70/70 Eco SeriesSpecification
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 16
118
Length 1
Length 2
Length 3
Length 4
116 (4.57)
208 (8.19)
329 (12.95)
428 (16.85)
249 (9.80)
342 (13.46)
462 (18.19)
562 (22.12)
295 (11.61)
390 (15.35)
510 (20.08)
610 (24.01)
235 (9.25)
330 (13.00)
450 (17.72)
550 (21.65)
420 bar
350 bar
G1, G11/4 or G11/2
Flange 11/2 SAE 3000-MFlange 11/4 SAE 3000-MFlange 11/2 SAE 6000-MFlange 11/4 SAE 6000-M
Type A B B B Max working Portpressure D70B 70L70T
Type 70T 70L 70BLength 1 14 10.5 11.5Length 2 16.5 13 14Length 3 19 15.5 16.5Length 4 22 18.5 19.5
Weights (kg)89
(3.50)
60(2.36)
135(5.31)
70(2
.75)
B
72
70
OptionPlug M12x1.5
Internal dia. 31/external dia. 41
22(0
.86)
108(4.25)
28(1
.10)
134(5.27)
Opt
iona
l ind
icat
or p
ort
No.
SAE
-flan
ge v
ersi
on
8(0.31)
137(5.39)
52(2
.04)
Optionplug G1/4
75(2.95)
80(3.15)
70(2.75)
60(2.36)
130(5.11)
Max torque 40Nm
Ø103(4.05)
155(6.10)
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Pressure Drop Curves
119
70-1 Elements with Microglass III
70-3 Elements with Microglass III
70 Series Empty Housing
70-2 Elements with Microglass III
70-4 Elements with Microglass III
With 3.5 bar bypass the recommended initial pressure drop is max 1.2 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:The total ∆p = housing ∆ph + (element ∆pe x working viscosity/30).
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
02Q
∆p (b
ar)
05Q 10Q 20Q
∆p (P
SID
)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.3
Flow (US GPM)
0 13 26 39 53 66 79 92 106 119 132
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
02Q
∆p (b
ar)
05Q
10Q
20Q
∆p (P
SID
)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.3
Flow (US GPM)
0 13 26 39 53 66 79 92 106 119 132
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
02Q
∆p (b
ar)
05Q
10Q
20Q ∆p (P
SID
)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.3
Flow (US GPM)
0 13 26 39 53 66 79 92 106 119 132
D
E
A
B C
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
∆p (b
ar)
0
0.2
0.4
1.4
1.2
1
0.6
0.8
Flow (US GPM)
0 53 79 106 13226
∆p (P
SID
)
0
2.9
5.8
11.6
17.4
20.3
14.5
11992663913
8.7
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
02Q
∆p (b
ar) 05Q
10Q
20Q ∆p (P
SID
)
Flow (US GPM)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.30 13 26 39 53 66 79 92 106 119 132
A: 70T with G16 connectionsB: 70T with G20 connections
70L with G16 connectionsC: 70L with G20 connections
70BD: 70T with G24 connectionsE: 70L with G24 connections
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
70/70 Eco SeriesPressure Drop Curves (cont.)
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 16
120
70-1 Elements with Ecoglass III
70-3 Elements with Ecoglass III 70-4 Elements with Ecoglass III
70-2 Elements with Ecoglass III
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
02QE
∆p (b
ar)
05QE
10QE20QE
∆p (P
SID
)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.3
Flow (US GPM)
0 13 26 39 53 66 79 92 106 119 132
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
02QE
∆p (b
ar)
05QE10QE
20QE
∆p (P
SID
)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.3
Flow (US GPM)
0 13 26 39 53 66 79 92 106 119 132
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500Flow (l/min)
02QE
∆p (b
ar) 05QE
10QE
20QE
∆p (P
SID
)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.3
Flow (US GPM)
0 13 26 39 53 66 79 92 106 119 132
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500
Flow (l/min)
02QE
∆p (b
ar) 05QE
10QE
20QE
∆p (P
SID
)
0
2.9
5.8
8.7
11.6
14.5
17.4
20.3
Flow (US GPM)
0 13 26 39 53 66 79 92 106 119 132
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Ordering Information
121
Note: Filter assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above.
Part number
70L110QBPKG16170L120QBPKG16170L210QBPKG20170L220QBPKG20170L310QBPKG24170L320QBPKG24170L410QBPKG24170L420QBPKG24170L110QEBPKG16170L120QEBPKG16170L210QEBPKG20170L220QEBPKG20170L310QEBPKG24170L320QEBPKG24170L410QEBPKG24170L420QEBPKG24170T110QBPKG16170T120QBPKG16170T210QBPKG20170T220QBPKG20170T310QBPKG24170T320QBPKG24170T410QBPKG24170T420QBPKG24170T110QEBPKG16170T120QEBPKG16170T210QEBPKG20170T220QEBPKG20170T310QEBPKG24170T320QEBPKG24170T410QEBPKG24170T420QEBPKG241
Supersedes
FF7005.Q010.BS35.GL16FF7005.Q020.BS35.GL16FF7006.Q010.BS35.GL20FF7006.Q020.BS35.GL20FF7007.Q010.BS35.GL24FF7007.Q020.BS35.GL24FF7008.Q010.BS35.GL24FF7008.Q020.BS35.GL24FF7005.QE10.BS35.GL16FF7005.QE20.BS35.GL16FF7006.QE10.BS35.GL20FF7006.QE20.BS35.GL20FF7007.QE10.BS35.GL24FF7007.QE20.BS35.GL24FF7008.QE10.BS35.GL24FF7008.QE20.BS35.GL24FF7005.Q010.BS35.GT16FF7005.Q020.BS35.GT16FF7006.Q010.BS35.GT20FF7006.Q020.BS35.GT20FF7007.Q010.BS35.GT24FF7007.Q020.BS35.GT24FF7008.Q010.BS35.GT24FF7008.Q020.BS35.GT24FF7005.QE10.BS35.GT16FF7005.QE20.BS35.GT16FF7006.QE10.BS35.GT20FF7006.QE20.BS35.GT20FF7007.QE10.BS35.GT24FF7007.QE20.BS35.GT24FF7008.QE10.BS35.GT24FF7008.QE20.BS35.GT24
Flow(l/min)
150230280300400430430450150230280300400430430450150200260280360380360380150200260280360380360380
Modelnumber
70L70L70L70L70L70L70L70L70L70L70L70L70L70L70L70L70T70T70T70T70T70T70T70T70T70T70T70T70T70T70T70T
Elementlength
11223344112233441122334411223344
Mediarating (µ)
1020102010201020102010201020102010201020102010201020102010201020
Seals
NitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrile
Indicator
PluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPluggedPlugged
Bypasssettings
3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar
Replacementelements
938773Q938774Q938777Q938778Q938781Q938782Q938785Q938786Q938789Q938790Q938793Q938794Q938797Q938798Q938801Q938802Q938773Q938774Q938777Q938778Q938781Q938782Q938785Q938786Q938789Q938790Q938793Q938794Q938797Q938798Q938801Q938802Q
Supersedes
FC7005.Q010.BKFC7005.Q020.BKFC7006.Q010.BKFC7006.Q020.BKFC7007.Q010.BKFC7007.Q020.BKFC7008.Q010.BKFC7008.Q020.BKFC7005.QE10.BKFC7005.QE20.BKFC7006.QE10.BKFC7006.QE20.BKFC7007.QE10.BKFC7007.QE20.BKFC7008.QE10.BKFC7008.QE20.BKFC7005.Q010.BKFC7005.Q020.BKFC7006.Q010.BKFC7006.Q020.BKFC7007.Q010.BKFC7007.Q020.BKFC7008.Q010.BKFC7008.Q020.BKFC7005.QE10.BKFC7005.QE20.BKFC7006.QE10.BKFC7006.QE20.BKFC7007.QE10.BKFC7007.QE20.BKFC7008.QE10.BKFC7008.QE20.BK
Ports
G1"G1"
G11/4"G11/4"G11/2"G11/2"G11/2"G11/2"G1"G1"
G11/4"G11/4"G11/2"G11/2"G11/2"G11/2"G1"G1"
G11/4"G11/4"G11/2"G11/2"G11/2"G11/2"G1"G1"
G11/4"G11/4"G11/2"G11/2"G11/2"G11/2"
Standard products table
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Filters
70/70 Eco SeriesOrdering Information (cont.)
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 16
122
Product configuratorBox 1
Code1 234
LengthLength 1Length 2Length 3Length 4
Filter typeBox 2
70LBox 2
3Box 3
10QBox 4
BBox 5
M3Box 6
KBox 7
G24Box 8
1
CodeBV
Seal materialNitrileFluoroelastomer
Seal typeBox 4
Bypass valve3.5 barNo bypassNo bypass
Bypass and indicator settingsIndicator
2.5 bar7.0 bar
No indicator (P)+ Box 8: code 2+ Box 8: code 2
CodeKNX
Box 6
CodeP
M3T1F1F2F3F4
Plugged with steel plugVisual indicatorElectrical indicatorElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.
IndicatorBox 5
Code12468
OptionsStandardNo bypassDrain port70T: side indicator ports70T: options 2 + 6
OptionsBox 8
Code70L70T70B
ModelHigh pressure filter with L-portHigh pressure filter with T-portHigh pressure filter with side manifold mounting
CodeBox 1
Options 6 and 8: in 70T model there is an option for 2 x indicatorports on filter outlet flange (standard indicator port not machined)P: both side indicator ports plugged with steel plugM3 or other indicator chosen: right side (in flow direction) portplugged with a plastic plug, left with a steel plug
Note: When using Ecoglass III elements reusable Eco-adaptor is required
CodeG16G20G24R20R24H20H24X32
ConnectionsThread G 1Thread G 1 1/4
Thread G 1 1/2
SAE flange 1 1/4" 3000-MSAE flange 1 1/2" 3000-MSAE flange 1 1/4" 6000-MSAE flange 1 1/2" 6000-MSide manifold (70B only)
Filter connectionLength 1
SSxxxxxx
Length 2SSSxxxxx
Length 3xSSx xxxx
Length 4xSSxxxxx
Box 7
Availability: S = standard productx = non-standard, ask for availability
Filter lengthLength 1
Length 2
Length 3
Length 4
Nominal flow (I/min) at viscosity 30 cSt
Media02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QE02Q/02QE05Q/05QE10Q/10QE20Q/20QE
G16 T-port80
120150200160180220240200220240250220230250260
G16 L-port &G20 T-port
80120150230160200260280220250280300250260280300
G20 L-port &Side manifold
80120150230160200280300220280300320270300330350
G24 T-port80120150230160200300330220280350380270330360380
G24 L-port80120150230160200320350220280400430270330430450
Media02Q05Q10Q20Q
02QE05QE10QE20QE02QH05QH10QH20QH
Replacement elements with nitrile sealsLength 1938771Q938772Q938773Q938774Q938787Q938788Q938789Q938790Q938803Q938804Q938805Q938806Q
Length 2938775Q938776Q938777Q938778Q938791Q938792Q938793Q938794Q938807Q938808Q938809Q938810Q
Length 3938779Q938780Q938781Q938782Q938795Q938796Q938797Q938798Q938811Q938812Q938813Q938814Q
Length 4938783Q938784Q938785Q938786Q938799Q938800Q938801Q938802Q938815Q938816Q938817Q938818Q
Note 1: Part numbers featured with boldhighlighted codes will ensure a ‘standard’product selection.Note 2: Alternate displayed part numberselection will require you to contact ParkerFiltration for availability.
When filter includes a bypass valve but not an indicator,code denotes bypass setting.
Item is standardItem is standard green optionItem is semi standardItem is non standard
123123123123
Highlights Key (Denotes part number availability)
Note: Standard items are in stock, semi standard items are available withinfour weeks
Box 3
Element media
Microglass III elementEcoglass III elementHigh collapse element
20Q20QE20QH
10Q 10QE10QH
05Q05QE05QH
02Q02QE02QH
Glass fibreMedia code
Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c]
% efficiency, based on the above beta ratio (ßx)ßx(c)=2
50.0%N/AN/AN/A6
Degree of filtrationCode
ßx(c)=10
90.0%N/AN/A611
ßx(c)=75
98.7%N/A4.58.517
ßx(c)=100
99.0%N/A5918
ßx(c)=200
99.5%N/A61020
ßx(c)=1000
99.9%4.571222
02Q05Q10Q20Q
DisposableMicroglass III
02QE05QE10QE20QE
Metal freeEcoglass III
02QH05QH10QH20QH
High collapseelement
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Duplex Filters
22PD/32PD SeriesMAX 260 I/min - 210 bar
High pressure filters123
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Duplex Filters
22PD/32PD Series
Typical Applications
Ship steering systemsContinuous operationindustrial systemsHigh flow flushing systems
The Parker Filtration 22PD/32PD SeriesHigh Pressure Duplex Filters.Specially designed to offer continuous operation,even during element change.
A changeover valve operates on the upstream sideof the filter, ensuring a contamination free system.
Features & Benefits
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 17
124
Features
Duplex design
Integrated balancing valve
Vent ports
Microglass III replacement elements
Visual, electrical and electronicindicators available
Advantages
Element service possible during operation
No external piping required
Purges all trapped air in filter
Multi-layered design produced high capacity and efficiency
Wire support reduces pleat bunching, keepsperformance consistent
Check element condition at a glance
Right style for the application
Benefits
Allows to keep machine running withfull contamination protection
Safety and reliability
Get the maximum performance fromthe elements
Prevents a "flabby" system
Great performance value
Reliable performance throughoutelement life
Reduces downtime, maximises element life
Optimises element life, preventsbypassing
Matches your system electricalconnections
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters
Specification
Pressure ratings:Maximum allowable operating pressure 210 bar.Filter housing pressure pulse fatigue tested: 106 cycles 210 bar.Connections:Inlet and outlet connections are threaded.Connection style Model
22PD 32PDBSPF(G) 1” 11/4”Flange SAE 3000-M 11/4” 11/2”*3000-M is a SAE style with appropriate metric fixing threads.Filter housing:Head material cast iron (GSI).Bowl material steel.Seal material:Nitrile or Fluoroelastomer.Operating temperature range:-20°C to +100°C.Bypass valve:Opening pressure 3.5 barFilter element:Degree of filtration:Determined by multipass-test according to ISO 16889.
Flow fatigue characteristics:Filter media is supported so that the optimal fatigue life is achieved (ISO 3724).Microglass III:Supported with epoxy coated metal wire mesh, end cap materialreinforced composite and metal inner core. Collapse rating 20 bar (ISO 2941).High collapse elements:(to be used when no bypass function in filter housing).Microglass III media supported with epoxy coated metal wire mesh onupstream and stainless steel on downstream, end cap material steel.Strong metal inner core. Collapse rating 210 bar (ISO 2941).Indicator options:Indicating differential pressure: 2.5 ± 0.3 bar.- visual M3.- electrical T1.- electronic F1(PNP).- electronic F2(NPN).For indicator details see catalogue section 6.Weights (kg):Model Length 1 Length 222PD 22 2732PD 44 50Fluid compatibility:Suitable for use with mineral and vegetable oils, and some synthetic oils. For other fluids, please consult Parker Filtration.
125
240(9.45)306
(12.05)
35(1.38)
42(1.65)
92(3.62)130
(5.12)
18(0.71)
20(0.79)
55(2.16)
78(3.07)
150(5.91)170
(6.69)
150(5.90)165
(6.49)
96(3.70)120
(4.72)
192(7.56)240
(9.45)
60(2.36)
75(2.95)
30(1.18)
36(1.42)
59(2.32)
70(2.75)
22PD-122-PD-232PD-132PD-2
236 (9.29)345 (13.58)317 (12.48)437 (17.20)
Dimensions mm (inches)
Model A B C D E F G H I J K L M N
Flange face detail
L
K
Both 22PD & 32PDM12x1.72 pitch
x20 deep
M
30.75Ø
38Ø
A
BIn Out
C
Hexagon22PD
24 A/F32PD
36 A/F
Bowlremoval100mm(3.93)
mm(inches)
N
D
E
F
JG
H
I
2 bleedholesG1/8
Bleed valveBalance valve
Indicator location
Changeoverhandle
40 mounting holes22PD: M8x1.2 pitchx12 deep32PD: M10x1.5 pitchx15 deep
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Duplex Filters
22PD/32PD SeriesPressure Drop Curves
The recommended level of initial pressure drop is max. 1.2 bar.If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:∆p = (∆p30 x viscosity of medium used) / 30 cSt. The total ∆p = housing ∆ph + (element ∆pe x working viscosity/30).
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 17
126
0.0
0.5
1.0
1.5
2.0
0 50 100 150 200 250 300 350 400
Flow (l/min)
∆p (b
ar)
22PD
Flow (US GPM)
0 39 92 106
∆p (P
SID
)
0
7.3
14.5
21.8
29.013 26 53 7966
32PD
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0 50 100 150 200 250 300 350 400
Flow (l/min)
∆p (b
ar) Cracking
Pressure
Flow (US GPM)
0 39 92 106
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.513 26 53 7966
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)
∆p (b
ar)
02Q
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05Q
10Q
20Q
0 13 26 66
50 100 2502000
53
150 300
39 79
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)
∆p (b
ar)
02Q
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05Q
10Q
20Q
0 13 26 66
50 100 2502000
53
150 300
39 79
22PD/32PD Empty Housing
22PD-1 Elements
22PD/32PD Bypass Valve
22PD-2 Elements
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)
∆p (b
ar)
02Q
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05Q
10Q20Q
0 13 26 66
50 100 2502000
53
150 300
39 79
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)
∆p (b
ar) 02Q
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05Q
10Q
20Q
0 13 26 66
50 100 2502000
53
150 300
39 79
32PD-1 Elements 32PD-2 Elements
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High pressure filters127
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)
∆p (b
ar)
02QH
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05QH 10QH
20QH
0 13 26 66
50 100 2502000
53
150 300
39 79
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)∆p
(bar
)
02QH
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05QH
10QH
20QH
0 13 26 66
50 100 2502000
53
150 300
39 79
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)
∆p (b
ar)
02QH
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05QH
10QH
20QH
0 13 26 66
50 100 2502000
53
150 300
39 79
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Flow (l/min)
∆p (b
ar)
02QH
Flow (US GPM)
∆p (P
SID
)
0
7.3
14.5
21.8
29.0
36.3
43.5
05QH
10QH
20QH
0 13 26 66
50 100 2502000
53
150 300
39 79
22PD-1 High Collapse Elements
32PD-1 High Collapse Elements
22PD-2 High Collapse Elements
32PD-2 High Collapse Elements
Ordering Information
Note: Filter assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.
Part number
22PD210QBM3KG16122PD210QBT1KG16122PD220QBM3KG16122PD220QBT1KG16132PD210QBM3KG20132PD210QBT1KG20132PD220QBM3KG20132PD220QBT1KG201
Supersedes
0-22-PD-2-10Q-V-50-C-10-22-PD-2-10Q-TW3-50-C-10-22-PD-2-20Q-V-50-C-10-22-PD-2-20Q-TW3-50-C-10-32-PD-2-10Q-V-50-D-10-32-PD-2-10Q-TW3-50-D-10-32-PD-2-20Q-V-50-D-10-32-PD-2-20Q-TW3-50-D-1
Flow(l/min)
120120140140240240260260
Modelnumber
22PD22PD22PD22PD32PD32PD32PD32PD
Elementlength
Length 2Length 2Length 2Length 2Length 2Length 2Length 2Length 2
Mediarating (µ)
1010202010102020
Seals
NitrileNitrileNitrileNitrileNitrileNitrileNitrileNitrile
Indicator
VisualElectrical
VisualElectrical
VisualElectrical
VisualElectrical
Bypasssettings
3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar3.5 bar
Replacementelements
G01315QG01315QG01938QG01938QG01098QG01098QG01954QG01954Q
Ports
G1"G1"G1"G1"
G11/4"G11/4"G11/4"G11/4"
Standard products table
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
High Pressure Duplex Filters
22PD/32PD SeriesOrdering Information (cont.)
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 17
128
Product configuratorBox 1
Code1 2
LengthLength 1Length 2
Filter typeBox 2
22PDBox 2
2Box 3
10QBox 4
BBox 5
M3Box 6
KBox 7
G16Box 8
1
CodeBV
Seal materialNitrileFluoroelastomer
Seal typeBox 4
Bypass valve3.5 barNo bypassNo bypass
Bypass and indicator settingsIndicator
2.5 bar5.0 bar
No indicator+ Box 8: code 2+ Box 8: code 2
CodeKMX
Box 6
CodeM3T1PNF1F2F3F4
Visual indicatorElectrical indicatorPlugged with steel plugNo indicator portElectronic 4 LED, PNP, N.O.Electronic 4 LED, NPN, N.O.Electronic 4 LED, PNP, N.C.Electronic 4 LED, NPN, N.C.
IndicatorBox 5
Code12
OptionsStandardNo bypass
OptionsBox 8
Code22PD32PD
ModelSmall high pressure duplex filterLarge high pressure duplex filter
CodeBox 1
Note 1: Part numbers featured with bold highlighted codeswill ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection willrequire you to contact Parker Filtration for availability.
CodeG16R20G20R24
Ports22PD: Thread G 1
SAE flange 1 1/4" 3000-M32PD: Thread G 1 1/4
SAE flange 1 1/2" 3000-M
Filter connectionBox 7
Media02Q05Q10Q20Q
02QH05QH10QH20QH
Replacement elements with nitrile seals22PD-1
G01282QG02721QG01281QG01930QG01442QG03737QG01441QG01932Q
22PD-2G01316QG02724QG01315QG01938QG01448QG03738QG01447QG01940Q
32PD-1G01069QG02567QG01068QG01946QG01454QG03739QG01453QG01948Q
32PD-2G01099QG02727QG01098QG01954QG01460QG03740QG01459QG01956Q
Media02Q05Q10Q20Q
02QH05QH10QH20QH
Replacement elements with fluoroelastomer seals22PD-1
G01302QG02723QG01301QG01934QG01446QG04235QG01445QG01935Q
22PD-2G01336QG02726QG01335QG01942QG01452QG04236QG01451QG01943Q
32PD-1G01089QG02569QG01088QG01950QG01458QG04237QG01457QG01951Q
32PD-2G01119QG02729QG01118QG01958QG01464QG04238QG01463QG01959Q
Filter model22PD-122PD-232PD-132PD-2
Nominal flow (I/min) at viscosity 30 cSt02Q70100100180
05Q80110150210
10Q100120210240
20Q120140230260
Filter model22PD32PD
Seal kitsNitrile
S04233S02373
FluoroelastomerS04234S02375
When filter includes a bypass valve but not an indicator,code denotes bypass setting.
Item is standardItem is standard green optionItem is semi standardItem is non standard
123123123123
Highlights Key (Denotes part number availability)
Note: Standard items are in stock, semi standard items are available within four weeks
Box 3
Element media
Microglass III elementHigh collapse element
20Q20QH
10Q 10QH
05Q05QH
02Q02QH
Glass fibreMedia code
Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c]
% efficiency, based on the above beta ratio (ßx)ßx(c)=2
50.0%N/AN/AN/A6
Degree of filtrationCode
ßx(c)=10
90.0%N/AN/A611
ßx(c)=75
98.7%N/A4.58.517
ßx(c)=100
99.0%N/A5918
ßx(c)=200
99.5%N/A61020
ßx(c)=1000
99.9%4.571222
02Q05Q10Q20Q
DisposableMicroglass III
02QH05QH10QH20QH
High collapseelement
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Throughout the world, Parker is serving more than 400,000 customers to improve productivity and reliability in thousands of industries.Parker motion and control systems are in operation on satellites orbiting the Earth, in machine tools and mobile equipment, on oil rigs andrefineries, in hospitals and laboratories, in fact, wherever there’s a need for motion and control, you’ll find Parker components and systemsolutions hard at work. For more information, visit Parker’s web site at www.parker.com/eu or call freefone 00800 27 27 5374
Key Markets• Commercial transports• Military aircraft• Regional transports• Aircraft engines• Business and general aviation
Key Products• Flight control systems and components• Hydraulic systems and components• Fuel systems and components• Pneumatic systems and components• Inert oxygen generating systems• Fluid metering, delivery and atomization devices• Wheels and brakes• Couplings, fittings, hoses and tubes
Aerospace
Key Markets• Factory automation• Transportation and automotive• Life sciences and medical• Machine tools• Semiconductor and electronics
Automation
Key Markets• Refrigeration and air conditioning• Transportation/mobile• Process• Industrial machinery• Medical/life sciences• Fuel cells• Precision cooling
Key Products• Pressure regulators• Check, ball and service valves• Value-added systems• Thermostatic and expansion valves• Electronic controllers• Contaminant controls• Heating/air conditioning hose• Gerotors
Climate & Industrial Controls
Key Markets• Industrial machinery• Process• Mobile• Marine• Oil & gas• Power generation and energy• Transportation• Food and beverage
Key Products• Hydraulic, lubrication and coolant filters• Process, chemical, water and microfiltration filters• Compressed air and gas purification filters• Condition monitoring• Analytical gas generators• Nitrogen, hydrogen and zero air generators• Engine air, fuel, oil filtration and systems
Filtration
Key Markets• Construction machinery• Agriculture• Transportation• Mobile• Industrial machinery• Oil & gas
Key Products• Rubber and thermoplastic hose• Industrial hose• Tube fittings and adaptors• Tubing and plastic fittings• Brass fittings and valves• Hose couplings• Quick disconnects
Fluid Connectors
Key Markets• Construction machinery• Agriculture• Industrial machinery• Oil & gas• Truck hydraulics• Power generation and energy
Key Products• Hydraulic cylinders and accumulators• Hydraulic valves and controls• Hydraulic motors and pumps• Power take-offs• Hydraulic systems
Hydraulics
Key Markets• Power generation• Oil & gas• Petrochemical• Microelectronics• Biopharmaceutical
Key Products• Medium/high pressure fittings and valves• Instrumentation fittings, valves, manifolds and regulators• High purity fittings, valves and regulators• Fluoropolymer fittings, valves, pumps and regulators• Analytical systems
Instrumentation
Key Markets• Transportation• Energy, oil & gas• Semiconductor• Aerospace• Fluid power• Life sciences• Telecommunications
Key Products• Elastomeric O-rings • Homogeneous and inserted elastomeric shapes and diaphragms• Metal and plastic retained composite seals• Polymeric and plastic dynamic seals• Rubber and plastic boots/bellows• Extruded and precision-cut/fabricated elastomeric seals• Thermoplastic engineered seals
Seal
Key Products• Pneumatic motion and control• Air preparation• Vacuum controls and sensors• Electromechanical stepper and servo motors, drives, and controls• Human machine interface• Electric actuators, gantry robots, slides and linear motors• Structural extrusion
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]
Parker HannifinSales Locations
AE – United Arab EmiratesAbu DhabiTel: +971 2 67 88 587
AR – ArgentinaBuenos AiresTel: +54 3327 44 4129
AT – AustriaWiener NeustadtTel: +43 (0)2622 23501Austria (Eastern Europe)Wiener NeustadtTel: +43 (0)2622 23501-970
AU – AustraliaCastle HillTel: +61 (0)2-9634 7777
AZ – AzerbaijanBakuTel: +99 412 598 3966
BE – BelgiumNivellesTel: +32 (0)67 280 900
BR – BrazilCachoeirinha RSTel: +55 51 3470 9144
BY – BelarusMinskTel: +375 17 209 9399
CA – CanadaMilton, OntarioTel: +1 905-693-3000
CH – SwitzerlandRef. Germany
CN – ChinaBeijingTel: +86 10 6561 0520ShanghaiTel: +86 21 5031 2525
CZ – Czech RepublicKlecanyTel: +420 284 083 111
DE – GermanyKaarstTel: +49 (0)2131 4016 0
DK – DenmarkBallerupTel: +45 4356 0400
ES – SpainMadridTel: +34 91 675 73 00
FI – Finland VantaaTel: +358 20 753 2500
FR – FranceContamine-sur-ArveTel: +33 (0)4 50 25 80 25
GR – GreeceAthensTel: +30 210 933 6450
HK – Hong KongTel: +852 2428 8008
HU – HungaryBudapestTel: +36 1 220 4155
IE – IrelandDublinTel: +353 (0)1 466 6370
IN – IndiaMumbaiTel: +91 22 5613 7081/82-85
IT – ItalyCorsico (MI)Tel: +39 02 45 19 21
JP – JapanTokyoTel: +81 3 6408 3900
KR – South KoreaSeoulTel: +82 2 559 0400
KZ – KazakhstanAlmatyTel: +7 3272 505 800
LV – LatviaRigaTel: +371 74 52601
MX – MexicoApodacaTel: +52 81 8156 6000
MY – MalaysiaSubang JayaTel: +60 3 5638 1476
NL – The NetherlandsOldenzaalTel: +31 (0)541 585000
NO – NorwaySkiTel: +47 64 91 10 00
NZ – New ZealandMt WellingtonTel: +64 9 574 1744
PL – PolandWarsawTel: +48 22 573 24 00
PT – PortugalLeça da PalmeiraTel: +351 22 9997 360
RO – RomaniaBucharestTel: +40 21 252 1382
RU – RussiaMoscowTel: +7 495 641 2156KrasnoyarskTel: +7 3912 52 73 35Yuzhno-SakhalinskTel: +7 4242 42 35 27St. PetersburgTel: +7 812 320 49 37
SE – SwedenSpångaTel: +46 (0)8 597 950 00
SG – SingaporeTel: +65 6887 6300
SI – SloveniaNovo MestoTel: +386 7 337 6650
SK – SlovakiaRef. Czech Republic
TH – ThailandBangkokTel: +662 717 8140
TR – TurkeyMerter/IstanbulTel: +90 212 482 91 06 or 07
TW – TaiwanTaipeiTel: +8862 2298 8987
UA – UkraineKyivTel: +380 44 494 2731
UK – United KingdomWarwickTel: +44 (0)1926 317 878
US – USACleveland (industrial)Tel: +1 216-896-3000Lincolnshire (mobile)Tel: +1 847-821-1500Miami (Pan American Div.)Tel: +305 470 8800
VE – VenezuelaCaracasTel: +58 212 238 5422
ZA – South AfricaKempton ParkTel: +27 (0)11-961 0700
Catalogue Ref: FDHB200UKIssue Date: 01/07Hydraulic Filter Division Europe
© Copyright 2007Parker Hannifin CorporationAll rights reserved.
Filtration website: www.parker.com/eurofiltFiltration email: [email protected] further information on other Parker Products, call EPIC free on 00800 27 27 5374
Hipress Componentes Hidráulicos - Ligue (31) 2103-6955 - [email protected]