Hydraulic Press Brake / Bending Machine

FNB Series:

Torsion Arm-to maintain parallelism of press beam. Backgauge, Slider Stroke electrical control and hand adjustment. Electrical panel with manual and auto operation.

1

KFNB Series:

Generous thick steel plates are used to give all TMA machines a rigid structure. Strong heavy torsion arms are used to ensure parallelism of the top beam. Stroke of the bending beam is controlled by two cylinders. Working on internal positive depth-stops. Setting of positive depth-stops easily controlled by push-buttons. Remote pressure regulators allows TMA Press Brakes to work at varying capacity

according to their work specification. This will not Load the machine on full capacity all the time and provide the machine a much longer working life.

2

Motorised Backgauge

Heiher productivity with better accuracy and long lasting reliability. Complete with height raiser for fine adjustment of finger height to suit different V-Dies. The backgauge assembly is supplied together with the above NC controller for

optimum performance.

3

FCB Series:

The CNC controller not nolyy improves the quality and production time to your

requirements but also eliminates your reliance on unpredictable human skills and labour.

The CNC system reduces valuable and expensive set-up time and the inevitable material wastage due to improper set-up procedures.

The CNC system uses less mechanical parts than a conventional mechanical machine thus the savings from routine parts replacement, maiintenance and the minimizing of unproductive down-time.

The consistency in quality and production time provides you the opportunity from repeat orders from satisfied customers and to open new markets.

We are produced a wide range of affordable high quality and high end computerized numerical controls Press Brake to you’re your manufacuring requirements. We also offer a wide range of CNC controllers with control option to suite your needs.

4

5

Hydraulic Shearing Machine / Cutting Machine

FNS Series:

Sheet plate welded structure is adopted, with hydraulic transmission and accumulator return, typical of an easy operation, reliable performance.Fitted with digital display system.

Indication by indicator is provided for adjustment of blade clearance, for a handy and prompt adjustment.

Alignment device with lighting and control device for shearing stroke are set, with a handy and prompt adjustment.

Rolling material support ball is provided, to minimize fish tail with sheet bar and reduce frictional resistance.

The machine tool is provided with the functions of digital display, soft limit, as well as prompt for one -way positioning clearance, and auto counting for shearing.

The rear stopper is fitted with coder and digital display system, so that the position of rear stopper is displayed more accurately, thus to further enhance the shearing precision of this machine.

6

7

GFNS Series:

All the GFNS Series Hydraulic Guillotine Shearing machine are highest standard with strict quality control to achieve a long life of minimal maintenance.

The Frame consists of heavy duty, solid welded steel structure giving max. rigidity and performance. All controls of the Guillotine shear can be carried out quickly and easily via the control panel located in front of the machine.

Standard controls comprise of electro-hydraulic operated variable rake angle, motorized front operated backgauge and inching mode from up-stroking and down-stroking.

Standard Accessories:

Hydraulic Guillotine C/W motorised Backgauge. Pump--Vicker(USA) / Bosch( Germany). Valve--Aron(Italy) / Bosch( Germany). Fitting--Tubing--EMB(Germany). Electrical equipment --Telemechanique-Schninder(Germany). Variable rake angle adjustment(1-3°). Rapid blade gap adjustment. 4 edge high carbon high chrome D2 quality shear blades. Front operated motorized backgauge range to 750mm. Shadow line lighting & well designed finger guard for clear view of cutting line. Safety foot switch operatioin. Top blades will automatically return to top position when foot

is removed from foot pedal. 1 meter side squaring arm with disappearing stops. Independent clamping of hold downs.

8

GFNS Series Shearing Machine Technical Data

9

FCS Series:

DAC350 controlling system of Holland Delem controls the backgauge, shearing stroke, angle and the clearance between the upper and lower blades together the numbers of workpieces accurately.

The shearing angle can be easily adjusted through auto-program, decreasing the deflection of workpiece.

The stroke of blades mounting can be adjusted automatically to realize the quick and accurate shear of small workpiece and the increase the work efficiency.

The high speed and large lead backgauge of linear guideway and ballscrew. The system can adjust the clearance betwwen the upper and lower blades

automatically according to the difference of thickness and material of the plate and improve shearing quality.

The Integrated hydraulic system from BOSCH or HOERBIGER decreases the pipe connection and eliminates the oil leakage, meanwhile, increases the stability and beautifies the appearance.

10

11