hydraulic setting tool operating instructions
TRANSCRIPT
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
1/13
OPERATING INSTRUCTIONS
Product -Hydraulic Setting Tool
Hydraulic_Setting_Tool-OI-Rev-A 1
Hydraulic Setting Tool
This document is intended to provide operating instructions for the Hydraulic Setting Tool line of
Evolution Oil Tool products. This guide is property of Evolution Oil Tools Inc. and is provided to
the customer for information purposes only. It is requested that the document not be reproduced
in any way, in whole or in part, or distributed without the express written consent of Evolution Oil
Tools Inc. The document is uncontrolled if printed.
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
2/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
2
TheHydraulic Setting Tool is a pressure-activated setting
tool used to set wireline retrievable plugs, permanent
packers, bridge plugs, cement retainers or other types of
completion equipment. The setting tool is connected to the
end of the tubing string and run to depth.
Pressuring up the tubing string activates the hydraulic
pistons. The force multiplies as the pressure passes througheach piston stage, providing the needed force to set the
downhole equipment. Once the equipment is set, the ports of
the setting tool are open, allowing the well to be pressure
tested or circulated and providing pressure equalization of
the tubing/annulus prior to retrieval of the tubing string.
Features
Multiple stage pistons eliminate high-activation pressures.
Can be run with jointed tubing or coiled tubing.
Easy field service.
f
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
3/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
3
Strain in Pounds Necessary to Set a Packer
Run on an Evolution Hydraulic Setting Tool
2 Cylinders - #10 & #20
35,000 lb Release
Stud
44,000 lb Release
Stud
50,000 lb Release
Stud
Pump
Pressure
(psi)
Strain
(lb) of
Force
Pump
Pressure
(psi)
Strain
(lb) of
Force
Pump
Pressure
(psi)
Strain
(lb) of
Force
1,000 22,090 1,000 31,090 1,000 37,0901,250 18,863 1,250 27,863 1,250 33,863
1,500 15,635 1,500 24,635 1,500 30,635
1,750 12,408 1,750 21,408 1,750 27,408
2,000 9,180 2,000 18,180 2,000 24,180
2,250 5,953 2,250 14,953 2,250 20,953
2,500 2,725 2,500 11,725 2,500 17,725
2,711 0 2,750 8,498 2,750 14,498
3,000 5,270 3,000 11,270
3,250 2,043 3,250 8,043
3,408 0 3,500 4,815
3,750 1,588
3,873 0
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
4/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
4
3 Cylinders - #10 & #20
35,000 lb ReleaseStud
44,000 lb ReleaseStud
50,000 lb ReleaseStud
Pump
Pressure
(psi)
Strain
(lb) of
Force
Pump
Pressure
(psi)
Strain
(lb) of
Force
Pump
Pressure
(psi)
Strain
(lb) of
Force
750 20,936 750 29,936 750 35,936
1,000 16,249 1,000 25,249 1,000 31,249
1,250 11,561 1,250 20,561 1,250 26,561
1,500 6,873 1,500 15,873 1,500 21,8731,750 2,185 1,750 11,185 1,750 17,185
1,867 0 2,000 6,497 2,000 12,497
2,250 1,809 2,250 7,809
2,346 0 2,500 3,122
2,666 0
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
5/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
5
4 Cylinders - #10 & #20
35,000 lb Release
Stud
44,000 lb Release
Stud
50,000 lb Release
Stud
Pump
Pressure
(psi)
Strain
(lb) of
Force
Pump
Pressure
(psi)
Strain
(lb) of
Force
Pump
Pressure
(psi)
Strain
(lb) of
Force
625 19,630 625 28,630 625 34,630
750 16,555 750 25,555 750 31,555
875 13,481 875 22,481 875 28,481
1,000 10,407 1,000 19,407 1,000 25,407
1,125 7,333 1,125 16,333 1,125 22,333
1,250 4,259 1,250 13,259 1,250 19,259
1,375 1,185 1,375 10,185 1,375 16,185
1,423 0 1,500 7,111 1,500 13,111
1,625 4,037 1,625 10,037
1,750 963 1,750 6,963
1,789 0 1,875 3,889
2,000 814
2,033 0
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
6/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
6
Hydraulic Setting Tool Exploded View
NOTE - The illustration above is intended as a guide only.
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
7/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
7
Installation/Setting
Procedure
Note
Inspect all O-Rings and replace ShearScrews on the Hydraulic Setting Tool
after each run to ensure effectiveoperation.
NoteInspect Pistons prior to tool assemblyand ensure there is no blockage ofthe port holes.
Note
*Use the tables on thepreceding pages todetermine the number of
cylinders required for youroperation.
1 Apply grease and installtwo (2) O-Rings into each
Cylinder sections.
NoteInspect all O-Ring grooves duringinstallation and clean as required.
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
8/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
8
2 Apply grease and installO-Rings onto Pistons.
3 Place Top CylinderHousing in vise.
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
9/13
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
10/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
10
8 Insert Lower Pistonpartially into the last
Cylinder. The Lower Piston is
easy to identify: it has a slot
at the bottom and no port
holes.
9 Grease threads onAdapter and slide over Lower
Piston. Screw Adapter onto
bottom Cylinder.
10 Slide Mandrel overthe Piston, with the notched
end pointing out the bottom
of the tool and into the
Adapter.
NoteKeep the slots on the Mandrel andPiston aligned during this procedure.
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
11/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
11
11 Slide the LockRing over the Mandrel with
the screw hole end toward
the bottom of the tool.
12 Slide the Sleeveover the Mandrel with the
screw holes pointing in to the
tool.
NoteKeep the slots on the Mandrel, Pistonand Sleeve aligned during thisprocedure.
13 Insert the LockingBlock into the slots of the
Sleeve, Mandrel and Lower
Piston.
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
12/13
-
8/10/2019 Hydraulic Setting Tool Operating Instructions
13/13
OPERATING INSTRUCTIONS
Product - Hydraulic Setting ToolHydraulic_Setting_Tool-
OI-Rev-A
This document is intended to provide operating instructions for the HydraulicSetting Tool line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed.
13
If you have any other questions or concerns, do not hesitate to contact us:
www.eotools.com
Canada
#3, 1820 30thAvenue NE
Calgary, Alberta, CanadaT2E 7M5
Toll Free: 1-800-265-TOOL (8665)Main: (403) 243-1442Fax: (403) 258-2614
6415A 63 St. CloseLloydminster, Alberta
Tel: 780-875-1570Cell: 780-522-8294Cell: 780-870-1126
4512 81 AveEdmonton, AlbertaTel: 587-758-9091Cell: 780-919-1722
Cell: 780-893-1019
US
P.O. Box 5363
2908 Coffey Street
Victoria, Texas 77903
Main: (361) 575-7900
Fax: (361) 575-8081
3400 Kermit HwyOdessa, Texas 79764
Tel: 432-337-7900Fax: 432-337-7901Cell: 432-638-7902