hygienic centrifugal pumps
TRANSCRIPT
Hygienic Centrifugal Pumps FEATURING INTERNAL SEAL & ELECTROPOLISHED SURFACE FINISHES
TR-IS
CENTRIFUGAL
W R I G H T F L O W T E C H N O L O G I E S . C O M2 W R I G H T F L O W T E C H N O L O G I E S . C O M 3
TR-ISThe Wright Flow TR-IS is the most economical hygienic centrifugal on the market that includes both fully electropolished internal components and internal seals as standard. Designed to both 3A and EHEDG compliance for CIP, this pump is the ideal solution for the pharmaceutical, personal care, food, and beverage industries where maximum hygiene, performance, and reliability are critically important. The TR-IS also conveniently provides a drop-in footprint for “C-Series” pumps, making system upgrades instantly available.
CAPACITY: 3,936 LPM / 1,040 GPM
PRESSURE: 10.2 BAR / 150 PSI
VISCOSITY: up to 800 cP
TEMPERATURE: 120°C / 248°F
FEATURES & OPTIONS• 316L stainless steel construction certified for 3A and
in compliance with EHEDG standards
• 100% electropolished internals for fastest cleaning and maximum hygiene
• Internal seal is more hygienic and delivers extended service life compared to external seals
• Fully CIP (clean in place) capable, and fully drainable
• Semi-open impeller design delivers improved efficiency ranging from 5-8% in most applications, saving on energy costs
• Matches the same footprint as industry standard “C-Series” pumps, no pipework changes are required for installation
• Convert easily between single and double balanced mechanical seals in SiC/SiC, C/SiC, SiC/SiC/SiC, or C/SiC/SiC
• Connections: Clamp (standard), Flange, NPT, Weldable, Bevel Seat, DIN, SMS
Internal seal on all models (single and double)
100% electropolished
Semi-open impeller
Drop-in for “C-Series” footprint
W R I G H T F L O W T E C H N O L O G I E S . C O M2 W R I G H T F L O W T E C H N O L O G I E S . C O M 3
WHY ELECTROPOLISH?• Ultra-smooth 16-Ra surface finish is faster and easier
to clean and sterilize while minimizing possibility of bacterial deposits.
• Improved corrosion resistance and ease of passivation.
• Surface finish achieved in all areas of wet end, not only on areas accessible by traditional polishing methods
APPLICATIONS• Pharmaceutical
& WFI
• Personal Care
• Alcohols
• Brewing & Distilling
• Soda / Pop
• Juice
• Dairy
• Bottled Water
• Chemicals
• & many others
Stainless Steel Surface
Electropolished Surface
WRIGHT FLOW MODEL
"C-SERIES" MODEL
MAXIMUM CAPACITY PORT SIZE MAXIMUM IMPELLER DIAMETER
MAXIMUM DIFFERENTIAL PRESSURE
GPM LPM INLET OUTLET PSI BAR
TR-IS 114 C114 157 594 1.5" 1.5" 4" 33 2.2
TR-IS 214 C214 190 719 2" 1.5" 4" 33 2.2
TR-IS 216 C216 283 1,071 2" 1.5" 6" 75 5.2
TR-IS 316 C316 283 1,071 2.5" 1.5" 6" 75 5.2
TR-IS 218 C218 335 1,268 2" 1.5" 8" 145 10.0
TR-IS 318 C318 525 1,987 3" 1.5" 8" 140 9.6
TR-IS 328 C328 762 2,884 3" 2" 8" 142 9.7
TR-IS 428 C428 813 3,077 4" 2" 8" 150 10.2
TR-IS 4410 C4410 1,040 3,936 4" 4" 10" 120 8.3
TR-IS 6410 C6410 930 3,520 6" 6" 10" 106 7.3
SPECIFICATIONS
TR-IS 216 (psi)
TR-C 216+ (psi)
TR-IS 2
16 %
Effi
cien
cy
TR-C 2
16+
% E
ffici
ency
TR-C 216+ (hp)TR-IS 216 (hp)
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
0 20 40 60 80 100 120 140 160 180 200 220 240
GPM
WFT_TR-IS_bro_rev0820©Copyright 2020. Wright Flow Technologies. All Rights Reserved.
AMERICAS: WRIGHT FLOW TECHNOLOGIES, INC.406 State Street Cedar Falls, IA 50613 USA Phone: (319) 268-8013 E-mail: [email protected]
EUROPE & ASIA: WRIGHT FLOW TECHNOLOGIES LTD.Highfield Industrial Estate Edison Road Eastbourne East Sussex, United Kingdom, BN23 6PT Phone: +44(0) 1323 509211 E-mail: [email protected]
FOR MORE INFORMATION, CONTACT YOUR LOCAL AUTHORIZED WRIGHT FLOW TECHNOLOGIES DISTRIBUTOR AT:
LEARN MORE AT: WRIGHTFLOWTECHNOLOGIES.COM
PERFORMANCE CURVES COMPARISON: TR-IS 216 VS TR-C 216
IMPROVED EFFICIENCY = HIGHER PRESSURE, HIGHER FLOW & LESS POWER DRAW
Note: Motors are available in IEC and NEMA 56C, TC, and TSC.