hysys print

Download Hysys Print

Post on 27-Sep-2015

216 views

Category:

Documents

0 download

Embed Size (px)

DESCRIPTION

Datos de corriente

TRANSCRIPT

  • LEGENDSBurlington, MAUSA

    Case Name: CALCULO DE SLUG CATCHER_BAJA 450 PSIG.HSCUnit Set: NewUserDate/Time: Thu May 07 17:12:08 2015

    SPT GroupPIPESYS v3.0.6.0 - PreReleSLUG CATCHER_BAJA 450 PSIG.HSCFLEX - 6 "

    ConnectionsInlet

    NAMEMIX_2015

    FROM OPERMIX-100Mixer:

    OutletNAME

    MIX_2_2015TO OPER

    EnergyNAMEQ-100

    TO OPER

    Calculation ProceduresMultiphase Horizontal Flow

    Overall Selection: Gas based default *Flow Regime Prediction : Taitel and Dukler *

    Liquid Holdup: Eaton et al *Frictional Pressure Loss: Oliemans *

    Uphill Correction: No Correction *Downhill Recovery: Recovery Based on Gas Density *

    Single Phase Flow

    Overall Selection: Fanning Equation

    Multiphase Vertical Upflow

    Overall Selection: Gas based default *Flow Regime Prediction: Govier, and Aziz *

    Liquid Holdup: Aziz, Govier, and Fogarasi *Frictional Pressure Loss: Aziz, Govier and Fogarasi *

    Multiphase Vertical Downflow

    Overall Selection: Gas based default *Flow Regime Prediction: Beggs and Brill Revised *

    Liquid Holdup: Beggs and Brill Revised *Frictional Pressure Loss: Beggs and Brill *

    Stepsizes and TolerancesPipe Lengths

    Intial stepsize: 100.00 ft *Minimum stepsize: 0.100 ft *Maximum stepsize: ---

    Temperature Convergence

    Initial dT Guess: -2.00 F *Minimum dT/step: 1.50 F *Maximum dT/step: 5.00 F *

    Convergence Tolerance: 0.050 F *

    Pressure Convergence

    Initial dP Guess: -10.00 psi *Minimum dP/step: 3.00 psi *Maximum dP/step: 10.00 psi *

    Convergence Tolerance: 0.010 psi *

    Enthalpy Convergence

    Minimum dH/step: 0.60 Btu/lb *Maximum dH/step: 2.00 Btu/lb *

    Convergence Tolerance: 0.010 Btu/lb *

    Overall Settings

    Stepsize and Tolerances: User Specified *Force Enthalpy Convergence: Disabled *

    Optimize Stepsize: Enabled *

    Overall Pipeline Pressure Convergence

    Minimum allowed pressure: -0.046 psig *Downstream press. conv. tolerance: 0.010 psi *

    EmulsionEmulsion Viscosity Option: Normal blended viscosity calculation

    Aspen Technology Inc. Aspen HYSYS Version 7.3 (25.0.0.7336) Page 1 of 41

    123456789

    1011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071

    * Specified by user.Licensed to: LEGENDS

  • LEGENDSBurlington, MAUSA

    Case Name: CALCULO DE SLUG CATCHER_BAJA 450 PSIG.HSCUnit Set: NewUserDate/Time: Thu May 07 17:12:08 2015

    SPT GroupPIPESYS v3.0.6.0 - PreReleSLUG CATCHER_BAJA 450 PSIG.HSCFLEX - 6 "

    Pipeline Units ProfileDistance at Pipeline Origin: 0.00 ft * Elevation at Pipeline Origin: 2561.01 ft *

    Pipeline unitPipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *

    Distance(ft)140.25 *309.81 *409.98 *473.90 *637.64 *733.79 *801.92 *884.96 *965.90 *

    1048.85 *1108.98 *1212.60 *1310.60 *1377.00 *1509.68 *1624.05 *1869.86 *1951.91 *2098.19 *2198.37 *2527.26 *2609.14 *2774.06 *3351.69 *3431.32 *3488.02 *3515.32 *3597.53 *3678.69 *3761.88 *3844.74 *3926.85 *4090.14 *4255.59 *4583.53 *4665.08 *4747.23 *4829.19 *4991.25 *5076.77 *5241.17 *5405.18 *5487.13 *5569.38 *5651.12 *5733.49 *5815.77 *5898.52 *5954.90 *6064.65 *6474.16 *6638.40 *

    Elevation(ft)2561.01 *2539.42 *2531.87 *2528.77 *2522.05 *2522.60 *2525.23 *2530.43 *2529.03 *2522.10 *2517.67 *2514.10 *2506.09 *2503.40 *2504.08 *2506.82 *2494.62 *2492.43 *2482.72 *2478.90 *2452.76 *2448.89 *2448.29 *2392.60 *2396.33 *2387.71 *2386.05 *2380.53 *2379.78 *2388.70 *2395.70 *2398.59 *2395.05 *2381.04 *2372.94 *2368.91 *2369.14 *2366.52 *2353.83 *2350.42 *2332.83 *2327.53 *2327.10 *2324.53 *2327.92 *2327.45 *2320.99 *2308.70 *2301.12 *2290.36 *2305.01 *2296.91 *

    Run(ft)140.25169.57100.17

    63.92163.74

    96.1568.1383.0380.9482.9560.12

    103.6397.9966.40

    132.68114.37245.81

    82.05146.28100.18328.89

    81.88164.91577.63

    79.6356.6927.3182.2181.1583.2082.8682.11

    163.29165.45327.94

    81.5582.1581.96

    162.0685.52

    164.40164.01

    81.9582.2581.7482.3782.2782.7656.37

    109.75409.51164.24

    Rise(ft)

    0.00-21.59

    -7.56-3.10-6.720.552.635.20

    -1.40-6.93-4.43-3.56-8.02-2.690.692.74

    -12.20-2.19-9.71-3.82

    -26.14-3.87-0.60

    -55.703.73

    -8.61-1.66-5.52-0.758.927.002.88

    -3.53-14.01

    -8.10-4.030.23

    -2.62-12.68

    -3.41-17.59

    -5.30-0.44-2.573.39

    -0.47-6.46

    -12.29-7.58

    -10.7614.65-8.10

    Length(ft)140.25170.94100.45

    64.00163.87

    96.1568.1883.2080.9683.2460.29

    103.6998.3266.46

    132.68114.40246.12

    82.08146.60100.26329.93

    81.97164.92580.31

    79.7257.3427.3682.3981.1683.6783.1582.16

    163.33166.05328.04

    81.6582.1582.00

    162.5585.59

    165.34164.09

    81.9582.2981.8182.3782.5383.6656.88

    110.28409.77164.44

    Angle(deg)

    0.000-7.255-4.314-2.774-2.3500.3262.2123.586

    -0.992-4.777-4.216-1.969-4.678-2.3200.2981.372

    -2.842-1.528-3.798-2.183-4.544-2.709-0.207-5.5072.682

    -8.638-3.479-3.843-0.5306.1184.8322.012

    -1.240-4.841-1.415-2.8310.162

    -1.834-4.475-2.285-6.107-1.850-0.305-1.7892.374

    -0.324-4.492-8.447-7.657-5.6002.049

    -2.822

    LabelPipe #208 *Pipe #207 *Pipe #206 *Pipe #205 *Pipe #204 *Pipe #203 *Pipe #202 *Pipe #201 *Pipe #200 *Pipe #199 *Pipe #198 *Pipe #197 *Pipe #196 *Pipe #195 *Pipe #194 *Pipe #193 *Pipe #192 *Pipe #191 *Pipe #190 *Pipe #189 *Pipe #188 *Pipe #187 *Pipe #186 *Pipe #185 *Pipe #184 *Pipe #183 *Pipe #182 *Pipe #181 *Pipe #180 *Pipe #179 *Pipe #178 *Pipe #177 *Pipe #176 *Pipe #175 *Pipe #174 *Pipe #173 *Pipe #172 *Pipe #171 *Pipe #170 *Pipe #169 *Pipe #168 *Pipe #167 *Pipe #166 *Pipe #165 *Pipe #164 *Pipe #163 *Pipe #162 *Pipe #161 *Pipe #160 *Pipe #159 *Pipe #158 *Pipe #157 *

    Aspen Technology Inc. Aspen HYSYS Version 7.3 (25.0.0.7336) Page 2 of 41

    123456789

    1011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071

    * Specified by user.Licensed to: LEGENDS

  • LEGENDSBurlington, MAUSA

    Case Name: CALCULO DE SLUG CATCHER_BAJA 450 PSIG.HSCUnit Set: NewUserDate/Time: Thu May 07 17:12:08 2015

    SPT GroupPIPESYS v3.0.6.0 - PreReleSLUG CATCHER_BAJA 450 PSIG.HSCFLEX - 6 "

    Pipeline Units ProfilePipeline unit

    Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *Pipe *

    Distance(ft)6884.53 *7131.01 *7377.22 *7541.15 *7706.05 *7789.51 *7869.56 *8034.32 *8198.49 *8444.86 *8691.76 *8830.16 *8937.77 *9184.70 *9348.61 *9760.12 *9842.26 *

    10055.62 *10170.86 *10581.85 *10828.09 *10910.13 *11157.00 *11321.42 *11485.67 *11897.16 *11979.73 *12143.81 *12226.09 *12801.86 *13048.33 *13460.72 *13624.32 *13707.20 *13839.18 *14035.47 *14282.51 *14364.43 *14446.11 *14610.39 *15020.97 *15102.19 *15433.65 *15514.67 *15596.32 *15679.37 *16006.87 *16172.19 *16336.69 *16482.93 *16732.42 *16834.15 *16932.39 *17019.77 *

    Elevation(ft)2302.81 *2290.86 *2283.44 *2274.75 *2264.30 *2263.67 *2266.86 *2279.13 *2285.43 *2292.30 *2311.12 *2314.31 *2325.49 *2341.69 *2346.79 *2373.45 *2373.92 *2387.76 *2398.65 *2423.32 *2431.92 *2437.43 *2463.18 *2467.16 *2460.66 *2423.27 *2419.21 *2422.97 *2431.07 *2474.33 *2485.72 *2526.43 *2532.51 *2530.71 *2519.53 *2509.14 *2495.16 *2497.51 *2504.67 *2511.55 *2514.70 *2511.41 *2477.13 *2471.14 *2467.20 *2470.18 *2464.88 *2447.89 *2431.57 *2424.30 *2455.19 *2397.45 *2344.76 *2311.50 *

    Run(ft)246.14246.47246.21163.94164.90

    83.4680.05

    164.76164.17246.37246.89138.41107.61246.93163.90411.52

    82.13213.36115.24410.99246.24

    82.04246.87164.43164.24411.50

    82.57164.08

    82.27575.78246.47412.39163.60

    82.88131.98196.29247.04

    81.9281.67

    164.29410.58

    81.22331.46

    81.0281.6583.05

    327.50165.32164.50146.25249.49101.73

    98.2487.38

    Rise(ft)

    5.89-11.95

    -7.41-8.69

    -10.45-0.643.19

    12.276.306.86

    18.833.19

    11.1816.20

    5.1026.66

    0.4713.8410.8924.68

    8.595.52

    25.743.98

    -6.49-37.39

    -4.063.768.10

    43.2611.3840.72

    6.08-1.80

    -11.18-10.39-13.97

    2.357.166.883.15

    -3.29-34.28

    -6.00-3.932.97

    -5.30-16.99-16.31

    -7.2730.89

    -57.74-52.69-33.26

    Length(ft)246.21246.76246.32164.17165.23

    83.4680.11

    165.22164.29246.46247.61138.44108.19247.46163.98412.38

    82.13213.81115.76411.73246.39

    82.22248.21164.47164.37413.19

    82.67164.13

    82.67577.40246.73414.39163.72

    82.90132.45196.56247.44

    81.9581.99

    164.43410.59

    81.29333.23

    81.2481.7483.10

    327.54166.19165.30146.43251.40116.97111.47

    93.49

    Angle(deg)

    1.371-2.775-1.724-3.036-3.625-0.4372.2844.2602.1971.5964.3601.3205.9323.7531.7833.7070.3273.7105.3993.4361.9993.8485.9531.386

    -2.264-5.192-2.8191.3135.6234.2972.6455.6392.127

    -1.243-4.842-3.030-3.2371.6405.0092.3990.440

    -2.318-5.905-4.234-2.7562.050

    -0.926-5.869-5.663-2.8477.057

    -29.579-28.206-20.838

    LabelPipe #156 *Pipe #155 *Pipe #154 *Pipe #153 *Pipe #152 *Pipe #151 *Pipe #150 *Pipe #149 *Pipe #148 *Pipe #147 *Pipe #146 *Pipe #145 *Pipe #144 *Pipe #143 *Pipe #142 *Pipe #141 *Pipe #140 *Pipe #139 *Pipe #138 *Pipe #137 *Pipe #136 *Pipe #135 *Pipe #134 *Pipe #133 *Pipe #132 *Pipe #13