i-cannano product brochure 2010

P R O D U C T C A T A L O G U E

I-CanNanoNanotechnology Paints & Coatings

TM

PPRROODDUUCCTT TTEESSTTIINNGG && BBSS//IISSOO SSTTAANNDDAARRDDSSI-Can Nano products have undergone extensive lab testsmany to stringent BS/ISO standards to confirm not only thatthey meet these standards, but that they exceed them. This includes tests for the following...

• Opacity • Through drying time • Scrub resistance• Alkali resistance • 1000 hours artificial weathering• Flexibility after artificial weathering • Fungal resistance• Adhesion after artificial weathering • Algae resistance• Water vapour permeability

The tests were conducted by the PRA (Paint Retailers Association)

during Sept-Dec 2008 who are accredited to ISO 17025 by the United

Kingdom Accreditation Service (UKAS).

II--CCAANNNNAANNOO CCOOLLOOUURR CCHHOOIICCEEI-Cannano offers over 1000+ colours consisting of 784 I-CanNano colours and 300+ RAL colours. For furtherinformation download our colour booklet below.

I-CanNanoEENNVVIIRROONNMMEENNTTAALLLLYY FFRRIIEENNDDLLYY TTEECCHHNNOOLLOOGGYY

TM

*Colours shown inphotographs are forillustrative purposes onlyand cannot be relied uponfor accurate colourrenditions due to limitationswithin the printing process.Copyright I-CanNano2009/10. All othercopyrights acknowledgedE&OE.

INDIA & ASIAInnovation Center for Applied Nanotechnology (I-CanNano) 22A Hemchandra Mukheerjee Road Barisha Kolkata - 700 008T: +91 9321025697E: [email protected]

UK & EUROPEI-CanNano Europe LimitedThe Nano Centre, 21 Oakland Park, Oakhill Lane, Ipswich IP2 9ALT: +44 (0) 1473 604590F: +44 (0) 845 280 5768E: [email protected]

USA & CANADAG2 Nano Technologies LLCT: +1 562-889-1688E: [email protected]

RUSSIAPeter Bike LtdT: +007 983-62-31E: [email protected]

ITALYCometoxT: +39 02 90003777E: [email protected]

SOUTH AFRICAI-CanNano South Africa LtdT: +44 (0) 1260 290 666E: [email protected]

UAEInternational Investor GroupT: +971 2 6678020E: [email protected]

SCANDINAVIAGatelineT: +358-(0)9-8709870E: [email protected]

WEST INDIESUnique Selling Solutions T: +1 868 749 7952E: [email protected]

For further technical information on ourNanocomposite product range, please seethe individual MSDS (Material Data SafetySheets) and I-CanNano technical sheets at our website as follows...

www.i-cannano.com

Dr. Arup Chatterjee, M.Sc, M.Tech, Ph.D

President & CEO –Innovation for AppliedTechnology India

Director – I-CanNanoEurope Ltd

Dean Cook, B.Sc

CEO– I-CanNanoEurope Ltd

WWHHAATT WWEE OOFFFFEERR YYOOUU......Nanotechnology is the chemical manipulation of functionalpaints and coatings at the molecular level to create highly resistant, longer lasting, and environmentally friendly,products. After a decade’s worth of Nanotechnologyresearch, we have created over 100 products usingfunctional materials and custom dispersion formulationtechnologies that deliver exceptional coating performancecapability.

P R O D U C T S Page

NANO FILLERS 4

NANO SEALANTS 6

NANO WATER BASED EMULSIONS 8

NANO WATER BASED HYGIENE PAINTS 10

NANO WATER BASED TEXTURED PAINTS 12

NANO WOOD PAINTS 14

NANO WATER PROOFING PRODUCTS 16

NANO FIRE RETARDANT PAINTS 18

NANO METAL PAINTS 20

NANO PROFESSIONAL COATINGS SOLUTIONS 22

NANO CONSTRUCTION CHEMICALS 24

NANO MARINE PAINTS 26

NANO SPECIALIST PAINTS 27

NANO SPOWDER COATINGS & INKS 30

HHOOWW NNAANNOOTTEECCHHNNOOLLOOGGYY WWOORRKKSS......Traditional paints and coatings are made up of large molecules where water, dirt andother organisms can leach into the gapsand erode the surface.

Nano engineered paints are densely packedwith robust molecules that act as apenetrative and functional barrier.

I-CanNano EENNVVIIRROONNMMEENNTTAALLLLYY FFRRIIEENNDDLLYY TTEECCHHNNOOLLOOGGYY

TTHHEE CCHHAANNGGIINNGG WWOORRLLDD OOFF PPAAIINNTTSS AANNDD CCOOAATTIINNGGSSThe paint and coatings industry has reached a watershed in its history. There are those that wouldargue that a sustainable eco friendly future for the industry is based upon using only naturalingredients that are good for the environment with no harsh chemicals or additives. At I-CanNano we absolutely believe and are committed to this.

We also believe that traditional paints and coatings that use or contain biocides or synthetic orchemical agents with high VOCs made to a price point, have had their day. We need products thatdeliver performance but without compromising our environment, products that deliver a sustainablefuture. Natural ingredients are great. But what is the point of using raw natural ingredients if you haveto repaint or recoat a surface often, thus using many times more natural resources than you have to?This is wasteful. And what's the point of using synthetic or chemical additives to try and make paintsperform better or last longer if they are harmful to our environment? Neither of these traditionalapproaches offer a truly sustainable solution. So what does?

A truly Sustainable future...Enter Nanotechnology Paints and Coatings... the only technology that can be described as trulysustainable. It uses natural ingredients. But Nano products are not material resource hungry, do notcontain harsh chemicals, yet deliver performance which typically outlives traditional products by afactor of 300%. Nano's longer lasting, high performance technology, means less painting, lessingredients, cleaner surfaces, better air quality, UV and bacterial resistance, dirt and water repellency...a longer lasting, highly sustainable solution.

In fact, it actually helps the environment. How? Take our Nano Pollutant Absorbent paint. Ideal forchimnies, tunnels, exhaust pipes or painted on roadside hoardings. This paint has a honeycombstructure that acts like millions of little bins by absorbing C02 emissions out of the air. This is howscience and nature can work together for the betterment of our environment, Providing an activeenvironmental solution. Best still, many of our products cost no more money than traditional paints.

At I-CanNano, we call our approach ‘Environmentally Friendly Technology’.

2 3

100-150µ

Organicmaterial/solvent

Inorganicmaterial/pigments

20-30µ

1. Standard Paints & Coatings

FunctionalNano Materials

1. Nano Paints & Coatings

TM

"Nanotechnology paints are not only more robust but theysignificantly reduce the need forraw material consumption."

Dr. Arup Chatterjee M.SC.M.Tech., Ph.D – CEO & President

"I-CanNano is committed to theapplication of nanotechnology for the benefit of mankind through practical innovation."

Dr. Arup Chatterjee M.SC.M.Tech., Ph.D – CEO & President

TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion – our putty becomes embedded in the surface of the wall. • The surface of walls become smooth & tough, resistant to water and are anti-bacterial.• Oil free base provides a smooth application, high coverage and no VOCs.• Robust nano particle matrix minimises peeling due to dampness that other fillers are prone to.

IIDDEEAALL FFOORR::All type of interior and exterior walls, ceilings and other plasterboard based structures.

MMEETTHHOODD OOFF DDEELLIIVVEERRYY::Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign material. Use emery paper to remove loose dusts. Open up and fill cracks and other holes with water base nano crack filler for best results.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::15-20 square feet per kg, depending on roughness, levelling of surface and porosity of the substrate.

DDRRYYIINNGG TTIIMMEE::Dries naturally in 12 hours. Apply water for curing and better bonding.

AAPPPPLLIICCAATTIIOONN::Pour water on the powder wall putty adequately and mix well to prepare a paste form. Ensure that no trace of dry powder is available in the paste. Apply the paste immediately, otherwise paste will dry up. Use thin metal spatular for application on wall surface.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano Fillers last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.

W H Y N A N O T E C H ?

AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’s fillers,putties, binders and powders, are completely water basedand are highly durable, water repellent, UV resistant,fungus/algae/bacteria resistant, and thermally insulating for the repair and making good all types of interior andexterior walls and other surfaces.

• Powder PuttyWaterbase nano Wall Putty (powder form)

• Acrylic Putty Waterbase nano Wall Putty (paste form)

• POP BinderWaterbase nano powder with Nano materials to add with POP

• Crack FillerWaterbase nano powder with Nano materials to fillup the cracks on wall surface

• EHP PowderWaterbase nano hydrophobic powder, crackresistance to be added with cement

PPEERRFFOORRMMAANNCCEE//TTEESSTTSS::I-CanNano products have undergoneextensive tests to laboratory standardsbased upon sound research conductedover a 10 year period.

Example Technical Data for Interior Wall Putty...

Method of application Trowel or FloatApplication temperature Room temperatureCoverage Area 10 -12 sqft/kgDrying Time Surface Dry 1 HourUV Stability 300 hrs+Water repellency Passed IS+Alkali Resistance Passed IS+

The technical information above is an examplespecification for the named product only. For moredetailed information, application instructions and MSDSsheets, please go to www.i-cannano.com

Nano FillersIINNTTEERRIIOORR && EEXXTTEERRIIOORR PPUUTTTTYY,, BBIINNDDEERRSS,, FFIILLLLEERR AANNDD PPOOWWDDEERR

Molecular Bonding Environmentally Friendly Quick Drying Time Anti-Bacterial Water/Dirt Repellent UV Resistant Anti-Corrosive I impact Resistant Stretchable

Water (Hydrophobic) & Dust RepellentUV Protection BarrierAnti-BacterialThermal Shock AbsorbingBreathable (Air can but water can’t pass through)Eco FriendlyWater rolls-off the SurfaceEasy Application Hygienic BarrierLow Cleaning and Maintenance Cost.Non-PolymericRetains the Quality of Surface

Robust/HighRobust/HighRobust/HighYesYesYesYesYesRobust/HighRobust/HighYesYes

I-CanNano Filler

ZEROVOC

4 5


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion – Surfaces are more strongly bonded for both a hard or smooth finish.• Chemical bonding between the nano particles and the surface provides for a very longlife.• Tile, boards, expansion joints, roads and runways become resistant to water, dirt, UV rays

and the sealant is also anti-bacterial.• The anti-sticking technology prevents dirt from adhering to the surface, thus easy to clean

and stain free.• With bathroom tiles, surfaces are no longer prone to moldy growth due to the anti-bacterial

nano-alloy in the sealant matrix.

IIDDEEAALL FFOORR::Works on all Bathroom, kitchen or other tiles whether on walls or the floor including ceramic, kottah,stone, etc. Specialised sealants also work on boards, expansion joints, roads and airport runways.

MMEETTHHOODD OOFF DDEELLIIVVEERRYY::Tiles can be sprayed, brushed, dipped or smeared using a soft cloth, tissue paper or sponge.

DDRRYYIINNGG TTIIMMEE::Products typically dry in 4-12 hours. Apply water for curing and better bonding. Drying time is approximate depending on temperature and humidity.

HHOOWW TTOO AAPPPPLLYY::Using water only for water based paste applications.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano Sealants last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’sSealants are durable, water repellent, fungus/algae and bacterially resistant, thermally insulating and acidresistant for that perfect, freshly tiled or sealed look.

• Pure Acrylic SealantWater Base Sealant to join asbestos boards, falseceilings, POP boards etc.

• Expansion Joint Sealant (Acrylic)Water Base Sealant to join expansion joints, cracks(Acrylic Base)

• Expansion Joint Sealant (PU Base)Polyurethane base Sealant to join expansion joint cracks(PU Base)

• Sealant for Concrete Epoxy/PU Base Sealant for major cracks in Highways, Runways & Roadways, other road surfaces etc.


Example Technical Data for Tile Joint Sealant...

Viscosity by stormer Sp. Gravity 1.4Method of application Sealant GunApplication temperature Room temperatureCoverage Area 10 sqft/kgDrying Time Surface Dry 3 hoursMinimum recoat time 12 hrsUV Stability 300 hrs+Water repellency Passed IS+Alkali Resistance Passed IS+


Nano SealantsWWAATTEERR BBAASSEEDD,, PPOOLLYYUURREETTHHAANNEE AANNDD EEUU//AACCRRYYLLIICC BBAASSEEDD SSEEAALLAANNTTSS

Water (Hydrophobic) & Dust RepellentUV Protection BarrierAnti-Bacterial Nano MetalThermal Shock AbsorbingTiles are Strongly Bonded Eco FriendlyTransparent & Easy Application Hygienic BarrierLow Cleaning and Maintenance CostCrack Resistant

YesHigh/Long LifeRobust/HighYesYesYesYesRobust/HighYesRobust/High

I-CanNano Sealants

6 7

ZEROVOC


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion – the paint becomes embedded in the wall’s surface.• High resistance to weathering (UV, fungus, water, dirt, etc) and any blistering.• Elastomeric matrix (stretchable paint that covers cracks) for a smooth, clean finish.• Highly robust finished surface due to inorganic nano-particles incorporated in the paint.• Easy to apply, with high coverage and non sticking application. Very low VOC.

IIDDEEAALL FFOORR::All Interior and exterior usage including plaster, drywall, internal concrete, hardboard siding, gypsum board, external concrete and masonry.

CCOOLLOOUURRSS AAVVAAIILLAABBLLEE::Colour of base is white. The base material may be tinted with universal colourants to any RAL standard. I-CanNano has 784+ colour shades and also a metallic finish.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::100–120 square feet per kg, depending on the porosity of substrate. Stir well before using. Use roller or brush for application.

DDRRYYIINNGG TTIIMMEE::Dries naturally dust free in 4 hours. Recoat after 4 hours. Drying time is variable depending on temperature and humidity. 1 coat of Primer and 2 coats of Finish recommended.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano water based paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Nanotechnology water based paints are durable, waterrepellent, UV resistant, hygienic, fungus/algae/bacteriaresistant, thermally insulating, elastomeric, and anti-sticking, with No or Low VOC, offering the highest qualityfinish for a wide variety of interior and exterior surfaces.

• Water Base Metal Primer• Water Base Metal Finish• Anti-Graffiti Paint• Alkyd Base Putty• Alkyd Base Primer• Alkyd Base Glossy Finish Paint• Alkyd Base Matt Finish Paint• PU Base Putty• PU Base Primer• PU Base Glossy Finish Paint• PU Base Matt Finish Paint• Epoxy Base Putty• Epoxy Base Primer• Epoxy Base Glossy Finish Paint• Epoxy Base Matt Finish Paint• CR Base Primer• CR Base Finish Paint• PU Base Clear Coat• Alkyd Base Clear Coat

PPEERRFFOORRMMAANNCCEE//TTEESSTTSS::I-CanNano products have undergoneextensive tests to stringent BS standards toconfirm not only that they meet thesestandards of the trade but that they exceedthem. This includes tests for the following...

• Opacity• Through drying time• Scrub resistance• Alkali resistance• 1000 hours artificial weathering• Flexibility after artificial weathering• Adhesion after artificial weathering• Fungal resistance• Algae resistance• Water vapour permeability

BS/ISO Standards Approved

Nano Water Based PaintsIINNTTEERRIIOORR && EEXXTTEERRIIOORR PPRRIIMMEERRSS,, MMAATTTT,, GGLLOOSSSS,, AANNDD CCLLEEAARR EEMMUULLSSIIOONN PPAAIINNTTSS

8 9

Stay Clean Anti-Bacterial

Formulae


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Kills S. Aurus, E.Coli, MRSA and other bacteria tested to BS Standards.• Nano Paints & Coatings do not allow bacteria, viruses or fungus to live due to their

nano alloy matrix.• Nano Hygiene Paints & Coatings repel stains/water/dust/dirt and thus require less cleaning.• No dampness is left on the surface and coated materials become crack resistant.• Nano Coatings of this type are non toxic, non-allergic, not cumulative and do not to

harm the environment.• Surfaces become EMI resistant and insulated for sound.

IIDDEEAALL FFOORR::Hospitals, Health Care Centres, Sterile Laboratories, Electronic Industries, Schools/Colleges. Hotels, Pharmaceutical, Drug & Biotech Industries and all Clean Room Applications.

SSUURRFFAACCEESS TTOO BBEE UUSSEEDD OONN::Building interior and exterior walls, Floor/Wall tiles (stone/ceramic), Sanitary ware surfaces, Wooden doors & windows, Door handles and accessories, Switch boards, Water taps, Glass panels and Metal surfaces.

HHOOWW TTOO AAPPPPLLYY::All materials can be applied to a surface by either spray, brush or roller.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano Hygiene paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.

AAVVAAIILLAABBLLEE IINN OOTTHHEERR NNAANNOO HHYYGGIIEENNEE VVAARRIIAANNTTSS::• Electrically Insulating Paints • Cloro-Rub Based Paints • Wood Based Paint • Clear Coat Paints


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’s HygienePaints & Coatings are resistant to bacteria, viruses, fungus, anddrug resistant pathogen as well as resistant to EMI (ElectroMagnetic Interference). Coated surfaces also repelstains/water/dust/dirt, requiring less cleaning and thus a major reduction in maintenance costs.

• Water Base Nano-Hygienic PrimerWater Base Nano Hygienic primer as first coat onbare/old internal plaster walls of hospitals, nursinghomes, schools, public buildings, etc

• Water Base Nano-Hygienic FinishWater Base Nano Hygienic paint as second/finalcoat on internal plaster walls of hospitals, nursinghomes, schools, public buildings, etc

• Water Base Nano-Super Hygienic FinishWater Base Nano Super Hygienic paint as final coatFinish on internal plaster walls of ICU, ICCU, OT ofhospitals, clean rooms, scientific labs, etc.

PPEERRFFOORRMMAANNCCEE//TTEESSTTSS::I-CanNano products have undergoneextensive BS standard tests toindependently confirm our claim of a99.99% bacterial kill rate. We have also passed or exceeded the following BS/ISO tests...

• Opacity• Through drying time• Scrub resistance• Alkali resistance• 1000 hours artificial weathering• Flexibility after artificial weathering• Adhesion after artificial weathering• Fungal resistance• Algae resistance• Water vapour permeability• Anti-bacterial


Nano Water Based Hygiene PaintsIINNTTEERRIIOORR && EEXXTTEERRIIOORR AANNTTII--BBAACCTTEERRIIAALL PPRRIIMMEERR,, FFIINNIISSHH,, AANNDD SSUUPPEERR HHYYGGIIEENNEE PPAAIINNTTSS

10 11

Independent tests conducted by the PRA (Paint RetailersAssociation) show I-CanNano panels (left) providing a 99.99% kill of bacterial growth compared with panels from two other leadingpaint manufacturers.

Stay Clean Anti-Bacterial

Formulae


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion – the paint becomes embedded in the wall’s surface.• High resistance to weathering (UV, fungus, water, dirt, etc) and any blistering.• Elastomeric matrix (stretchable paint that covers cracks) for a smooth, clean finish.• Highly robust finished surface due to inorganic nano-particles incorporated in the paint.• Easy to apply, with high coverage and non sticking application. Low VOC.

IIDDEEAALL FFOORR::All Interior and exterior usage including plaster, drywall, internal concrete, hardboard siding, gypsum board, external concrete and masonry.

CCOOLLOOUURRSS AAVVAAIILLAABBLLEE::Colour of base is white. The base material may be tinted with universal colourants or any RAL standard. I-CanNano has 784+ colour shades and also a metallic finish.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::10–12 square feet per kg, depending on the porosity of substrate. Stir well before using. Use roller or brush for application.

DDRRYYIINNGG TTIIMMEE::Dries naturally dust free in 4 hours. Recoat after 4 hours. Drying time is variable depending on temperature and humidity. 2 coats of Finish recommended.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano water based textured paints last considerably longer, are more robust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.

LOWVOC


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Nanotechnology textured based paints are durable, waterrepellent, UV resistant, hygienic, fungus/algae/bacteriaresistant, thermally insulating, elastomeric, and anti-sticking, with No or Low VOC, offering the highest qualityfinish for a wide variety of interior and exterior surfaces.

• Comb TexWater Base Nano Texture paint on internal/external plaster walls for decorative purpose

• Fine TexWater Base Nano Texture paint on internal/external plaster walls for decorative purpose

• Rustic TexWater Base Nano Texture paint on internal/external plaster walls for decorative purpose

• Spray TexWater Base Nano Texture paint on internal/external plaster walls for decorative purpose

• Sand TexWater base nano texture paint on external wallswith sand stone finish

and many more...

PPEERRFFOORRMMAANNCCEE//TTEESSTTSS::I-CanNano products have undergoneextensive tests to stringent BS standards toconfirm not only that they meet thesestandards of the trade but that they exceedthem. This includes tests for the following...

• Opacity• Through drying time• Scrub resistance• Alkali resistance• 1000 hours artificial weathering• Flexibility after artificial weathering• Adhesion after artificial weathering• Fungal resistance• Algae resistance• Water vapour permeability


Nano Water Based Textured PaintsIINNTTEERRIIOORR && EEXXTTEERRIIOORR DDEECCOORRAATTIIVVEE TTEEXXTTUURREEDD AANNDD SSAANNDD SSTTOONNEE FFIINNIISSHHEESS

12 13


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion. The paint becomes embedded in the surface not just masking the wood.• High resistance to blistering from weathering, UV light, fungus, water, dirt, sap and algae.• Exceptionally robust performance due to inorganic nano-particles incorporated in the paint matrix.• Additional features include termite resistant, hygienic barrier, scratch resistant and anti-sticking.• A fire resistant version is available if required.

IIDDEEAALL FFOORR::All interior and exterior wood finishes, including hard and soft wood floors, wooden furniture, exterior gardenfurniture or any other wooden surface. The colour of base is white but may be tinted with universalcolourants to 15 different colours.

MMEETTHHOODD OOFF DDEELLIIVVEERRYY::Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign material.Repair cracks and other holes with I-CanNano wood nano sealer for best results. Spot prime all patch work with I-CanNano nano wood primer.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::100–120 square feet per kg, depending on the porosity of the substrate. Stir well before using. Use spray or brush. 1 coat of Primer and 2 coats of Finish recommended. Choice of colours. Apply sealer, then sand, before applying 1 coat of Primer and 2 coats of Finish.

DDRRYYIINNGG TTIIMMEE::Surface dries naturally dust free in 2 hours. Recoat after 1 day. Drying time is variable depending on temperature and humidity. Hard dry in 3 days.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano wood paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’s WoodPaints, are durable, water repellent, UV resistant,fungus/algae/bacteria resistant, termite free, scratchresistant, anti-corrosive sealer, primer & finish for a widevariety of exterior and interior surfaces.

• PU Base Wood Nano-Sealer• PU Base Wood Nano-Primer• PU Base Wood Nano-Paint (Finish)• Alkyd Base Wood Nano-Sealer• Alkyd Base Wood Nano-Primer• Alkyd Base Wood Nano-Paint (Finish)• Water Base Wood Nano-Sealer• Water Base Wood Nano-Primer• Water Base Wood Nano-Paint (Finish)• Epoxy Base Wood Nano-Sealer• Epoxy Base Wood Nano-Primer• Epoxy Base Wood Nano-Paint (Finish)• Nano Fire Resistant Paint - CR Base


Example Technical Data for PU Wood Finish...

Type base Air drying two pack systemMixing Ratio 80:20Viscosity 70” @23oCSp. Gravity 0.80% of solid contain by volume 25%Pot life 1 yearMethod of application Brush/SprayApplication temperature 10-50oCApplication Viscosity (Spray) 25”@30oCDry film thickness (Brush) 20µCoverage (Brush or Spray) 100 sq ft/kgSurface Dry 2 hrsTack Dry 1 dayHard Dry 3 daysMinimum recoat time 1 dayUV Stability 400+ hrsFinish GlossScratch Resistance 2 kg+Salt Spray 1000+ hrsHumidity 1000+ hrsImpact Resistance 20J+


Nano Wood PaintsIINNTTEERRIIOORR && EEXXTTEERRIIOORR SSEEAALLEERR,, PPRRIIMMEERR AANNDD FFIINNIISSHH

Water (Hydrophobic) & Dust RepellentUV Protection BarrierAnti-Corrosive SealerRobust Inorganic Nano-particle MatrixAnti-fungal and anti-algaeEco Friendly Reduced Cost/ApplicationLonglife Guarantee/Scratch resistantHygienic BarrierAnti-StickingElastomeric (Stretchable Paint)Quick Drying Solution

YesHigh/Long LifeRobust/HighYesRobust/HighYesYesYesRobust/HighYesRobust/HighYes

I-CanNano Wood Paints

14 15

W H Y N A N O T E C H = ?

TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion – Nano Water Proof paint embeds itself into the surface (it is not film like).• High resistance to continuous water pressure applied by water tanks and swimming pools, etc.• Robustly anti-bacterial, low VOC, UV resistant, easy application, and helps to arrest salt formation.• Includes an elastomeric (stretchable) nano technology matrix which allows paint to cover cracks.

IIDDEEAALL FFOORR::Swimming pools, water proofing for rooftops, water tank interiors, bathroom sunk below the tiling surface,floors, road markings, and for negative surface water proofing. The paints provide a robust defence againsthigh pressure capillary action. Can be applied to Plaster, RCC, Bitumen, Ceramic, Stones and Metal surfaces.

MMEETTHHOODD OOFF DDEELLIIVVEERRYY::Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign material. Use emery paper to remove loose dusts. Repair cracks and other holes with I-Can water base nano wall filler for best results. Glossy, glazed or dense surfaces must be dulled.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::60–70 square feet per kg, depending on the porosity. 1 coat Primer & 2 coats of Finish recommended.

DDRRYYIINNGG TTIIMMEE::Dries naturally in 12 hours for each coat. Drying time is variable depending on temperature and humidity.

HHOOWW TTOO AAPPPPLLYY::Stir well before using. Use a brush for application. Solvent based. Comes in two parts – Primer & Finish. Available in various colours.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano water proof paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’s Cloro-Rub Based Paints provide durable, high water repellent,UV, fungus/algae/bacteria resistant, thermally insulating,elastomeric capability, for water tanks, swimming pools,and various interior surfaces where water seepage needsto be prevented.

• Nano Water base Water Proofing CompoundCombination of Powder & Solution mixed in (7:3)and applied for waterproofing of terrace, bathrooms, basement, water tank etc.

• Chlorub Base PrimerChlororub Base water proofing primer for watertank, swimming pool, terrace, roof-top garden, basement

• Chlorub Base FinishChlororub Base water proofing final coat paint forwatertank, swimming pool, terrace, roof-top, basement

• Anti-damp Nano PowderNano powder for plaster walls by suction methodto avoid dampening on bathroom walls (both +ve &-vce walls) surf

• Salt/Leaching Arrester - water baseNano solution to be applied for arresting salt pittering action on plaster walls

• Salt/Leaching Arrester - solvent baseNano solution to be applied for arresting salt pittering action on plaster walls


Example Technical Data for Waterproof Paints...

Viscosity by stormer 120”@30oC Sp. Gravity 1.4Method of application BrushApplication temperature Room temperatureApplication Viscosity 70”Coverage Area 100 sqft/kgDrying Time Surface Dry 30minutesMinimum recoat time 12 hrsBrushability Brushable Flow Levelling selfOpacity OpaqueUV Stability 300 hrs+Gloss Semi Gloss and MattWater repellency Passed IS+Alkali Resistance Passed IS+


Nano Water Proof PaintsPPRRIIMMEERR,, FFIINNIISSHH,, CCOOMMPPOOUUNNDD,, PPOOWWDDEERR AANNDD SSAALLTT LLEEAACCHHIINNGG AARRRREESSTTEERR


Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

I-CanNano Waterproof Paints

1716

W H Y N A N O T E C H P A I N T S ?

TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion – Nano Fire Retardant paint embeds itself into the surface.• High resistance to continuous fire applied on many different surfaces types• Robustly anti-bacterial, low VOC, UV resistant, easy application, and helps to arrest fire spread.• Includes an elastomeric (stretchable) nano technology matrix which allows paint to cover cracks.

IIDDEEAALL FFOORR::Oil Rigs, Fuel Rigs, Petrol Stations, Fuel Transportation, Airports, Train Stations, Motor Sport, Marine,Electrical Enclosures, Power Supplies, Power Stations, Industrial Buildings, Homes, etc, for all types of fireretardant applications. The paints provide a robust defence against risk of fire. Can be applied to Plaster,RCC, Bitumen, Ceramic, Stone, Metal surfaces and even Paper and Card.

MMEETTHHOODD OOFF DDEELLIIVVEERRYY::Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign material. Use emery paper to remove loose dusts. Repair cracks and other holes with I-CanNano filler for bestresults. Glossy, glazed or dense surfaces must be dulled.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::60–70 square feet per kg, depending on the porosity. 2 coats recommended.

DDRRYYIINNGG TTIIMMEE::Dries naturally in 24 hours, depending on temperature and humidity.

HHOOWW TTOO AAPPPPLLYY::Stir well before using. Use a brush or spray. Solvent based.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano fire retardant paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.

LOWVOC

Nano Science Environmentally Friendly Quick Drying Time Anti-Bacterial Water/Dirt Repellent UV Resistant Anti-Corrosive Impact Resistant Stretchable

AAVVAAIILLAABBLLEE IINN AA UUNNIIVVEERRSSAALL VVEERRSSIIOONN::Based on Chemical Nanotechnology, I-CanNano’s FireRetardant Paints can be used s either a protective finish or can be used alone as a decorative topcoat to providerobust fire protection, or on surfaces with a non-combustible performance currently maintained with basicflame retardant paints.

Suitable for use direct to bare or sound previously paintednon-combustible walls, ceilings and other structures.

Fire Proof Paints, also known as flame retardant paints,assist in the control of fire hazards caused by combustiblematerials, such as fuel, electricity, wood, paper and cardas well as existing flammable finishes.

Nano Fire Retardant Paint actually checks the fire in itsprogress by extinguishing it at the point of contact. Ourpaint is also based highly durable, water repellent, UVresistant, fungus/algae/bacteria resistant, and thermallyinsulating.

• Nano Fire Retardant PaintSolvent based single pack solution


Example Technical Data for Fire Retadant Paint...

Product Name: Fire Retardant PaintAppearance: Smooth & uniformColor: Reddish whiteViscosity: (170±10) sec at B4 cup at 30c.Specific gravity: 1.32 kg/ LtDrying time: Surface dry 2 hrs

Tack dry 10 hrs.Hard dry 24hrs.

Volume solid: (60±2)%Flexibility & adhesion: Pass IS+ (Mandrel Test).Application procedure: Spray or brush.Thinning ratio: I-Can 8000 thinner If required


Nano Fire Retardant PaintsSSOOLLVVEENNTT BBAASSEEDD SSIINNGGLLEE PPAACCKK SSOOLLUUTTIIOONN

Water (Hydrophobic) & Dust RepellentUV Protection BarrierAnti-Bacterial Nano MetalRobust Inorganic Nano-particle MatrixBetter Indoor Air QualityEco FriendlyReduced Cost/ApplicationLonglife GuaranteeFire Retardent BarrierAnti-Sticking & Anti-CorrosiveElastomeric (Stretchable Paint)Quick Drying Solution

YesHigh/Long LifeRobust/HighYesYesYesYesYesRobust/HighYesRobust/HighYes

I-CanNano Fire Retardent Paints

18 19


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion, high anti-corrosive (1000 – 4500 hours of salt spray).• A powder version is available offering 7,000+ hours of salt spray.• High resistance to weathering (UV, fungus, water, dirt, etc) and any blistering.• Elastomeric matrix (stretchable paint that covers cracks) for a smooth, clean finish.• Highly robust finished surface due to inorganic nano-particles incorporated in the paint.• Easy to apply, with high coverage and non sticking application.

IIDDEEAALL FFOORR::Can be applied to all Mild Steel, CI, DI, Aluminium, SS surfaces. Not recommended for floors and wood.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::80 – 100 square feet per kg, depending on the porosity of the substrate.

DDRRYYIINNGG TTIIMMEE::Drying Time – Surface Dry 1 hour, Tack Dry 3-4 hours, Hard Dry 3 days. Drying time is variable depending on temperature and humidity.

HHOOWW TTOO AAPPPPLLYY::One coat primer and one coat finish. Use spray or brush for application.1 coat of Primer and 2 coats of Finish recommended.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano metal paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.

LOWVOC


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’s Fillers,putties, binders and powders, are completely water basedand are highly durable, water repellent, UV resistant,fungus/algae/bacteria resistant, and thermally insulating for the repair and making good all types of interior andexterior walls and other surfaces.

• Water Base Metal Primer• Water Base Metal Finish• Anti-graffiti Paint• Alkyd Base Putty• Alkyd Base Primer• Alkyd Base Glossy Finish Paint• Alkyd Base Matt Finish Paint• PU Base Putty• PU Base Primer• PU Base Glossy Finish Paint• PU Base Matt Finish Paint• Epoxy Base Putty• Epoxy Base Primer• Epoxy Base Glossy Finish Paint• Epoxy Base Matt Finish Paint• CR Base Primer• CR Base Finish Paint• PU Base Clear Coat • Alkyd Base Clear Coat• Epoxy Base Clear Coat• Strippable Coating


Example Technical Data for Anti-Corrosive Metal Paint..

Mixing Ratio 80:20Viscosity 180” @23oCSp. Gravity 1.33% of solid contain by volume 66.5%Pot life 18 hoursMethod of application Brush/SprayApplication temperature 10-50oCApplication Viscosity (Spray) 50”@30oCDry film thickness (Brush) 30µCoverage (Brush or Spray) 90-100 sq ft/kgSurface Dry 1 hrTack Dry 3-4 hrsHard Dry 3 daysMinimum recoat time 4 hrsUV Stability 400+ hrsFinish Semi Gloss or GlossScratch Resistance 3 kg+Salt Spray 1000 - 4,500+ hrsHumidity 1000+ hrsImpact Resistance 20J+


Nano Metal PaintsWWAATTEERR OORR SSOOLLVVEENNTT BBAASSEEDD PPUUTTTTYY,, PPRRIIMMEERR,, FFIINNIISSHH ((GGLLOOSSSS,, MMAATTTT OORR CCLLEEAARR)),, WWEELLDDAABBLLEE..

Water (Hydrophobic) & Dust RepellentUV Protection BarrierAnti-Bacterial Nano MetalRobust Inorganic Nano-particle MatrixBetter Indoor Air QualityEco FriendlyReduced Cost/ApplicationLonglife GuaranteeHygienic BarrierAnti-Sticking & Anti-CorrosiveElastomeric (Stretchable Paint)Quick Drying Solution

YesHigh/Long LifeRobust/HighYesYesYesYesYesRobust/HighYesRobust/HighYes

I-CanNano Metal Paints

20 21


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion – the nano-particles self assemble and bond with the surface.• Chemical bonding between nano particles and glass/wall/ceramic/leather surface provides very longlife.• Improved visibility, repellency hydrophobicity and remains completely transparent. • UV protection helps to prevent UV damage which is blocked by nano-particles density• The anti-sticking technology prevents dirt from adhering to the surface, easy to clean and stain free.• Surfaces become anti-corrosive and highly resistant to acidic and alkaline solutions.

IIDDEEAALL FFOORR::All interior and exterior glass/ ceramic/leather surfaces including glass roofs, windows, doors, decorativeglass, shower cabins, car windscreens, sanitary wear, leather goods, and all types of stone walls and floors.

DDRRYYIINNGG TTIIMMEE && CCOOVVEERRAAGGEE::The Nano glass coating dries naturally, dust free, dependent on temperature and humidity. One coat only.For coverage of each coating please see specific applications sheet.

HHOOWW TTOO AAPPPPLLYY::Stir well before using. Use spray, brush or cloth for application. Polish the surface to remove any trace of excess solvent after drying time. Do not apply in dusty and moisture/rainy/high humid conditions.

MMEETTHHOODD OOFF DDEELLIIVVEERRYY::Glass/ceramic can be sprayed, brushed, dipped or smeared using a soft cloth, tissue paper or sponge.Leather goods need to be saturated. Walls can be sprayed or brushed.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano coatings solutions last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.



Example Technical Data for Glass Coating...

Viscosity by stormer 120”@30oC Sp. Gravity 1.3Contact Angle of water drops 118 degreesThickness of coating 530ALight Transmission (Transmitivity) No ChangeAbrasion Resistance ImprovedOptical Distortion No ChangeSecondary Image Separation No ChangeIdentification of Colors No ChangeWiper Test More than 330 hrs.Temperature withstand ability Above 3000Scratch Resistance ImprovedThermal Insulation ‘U’ value No Change in ‘U’ valueContact angle post abrasion No significant changeUV Protection 60% blocking of UV Rays


Nano Pro Coatings SolutionsGGLLAASSSS,, CCEERRAAMMIICC,, SSTTOONNEE,, AANNTTII--DDAAMMPP,, AANNDD LLEEAATTHHEERR PPRROOFFEESSSSIIOONNAALL CCOOAATTIINNGGSS

Water (Hydrophobic) & Dust RepellentUV Protection & Hygiene BarrierConserves Air-Condition LoadProtects Glass for Corrosion (Acid Rain)Optically Neutral (Colourless, Transparent)Stable at Varying TemperaturesLow Cleaning and MaintenanceProtects the Quality of SurfaceEcologically Beneficial & Biologically SafeIncreased Resistance to Dirt & GrimeIncreased Resistance to Water PoolingSignificantly Decreased Maintenance Cost

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

I-CanNano Glass Coating


• Glass CoatingTransparent non polymeric coating for glass withhigh hydrophobicity, oleophobic, dust repellentproperties

• Ceramic Coating (IPA Base) Transparent non polymeric coating for ceramicsurface high hydrophobicity, oleophobic, dustrepellent, antibacterial properties

• Stone Coating (Water base, IPA Base)Transparent non polymeric coating for stonesurface with high hydrophobicity, oleophobic, dustrepellent properties

• Anti Damp CoatingTransparent non polymeric coating for plaster wallswith high hydrophobicity, dust repellent properties

• Leather CoatingTransparent non polymeric coating for leathers withantifungal property

22 23


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• The nano rust remover delivers a quick, easy and safe way to prepare metal surfaces • The nano shuttering oil helps provides an excellent finish to the concrete• Our Admixture uses Carbon nano tubes to bridge across voids and cracks which helps

in load transfer in case of any tension. • Interfacial interaction between CNT and C-H-S gel produces high bonding strength

between reinforcement and cement hindering crack propagation.• Addition of CNT and other nano-particulates to concrete improves its durability

through physical and chemical interactions such as pore filling and pore size distribution.

IIDDEEAALL FFOORR::Tremulus syrtes suffragarit apparatus bellis, quamquam syrtes miscere adlaudabilis agricolae.Apparatus bellis vocificat umbraculi. Fiducias am

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::Plane perspicax saburre comiter amputat zothecas, etiam pessimus tremulus agricolae adquireret quadrupei. Verecundus cathedras de

DDRRYYIINNGG TTIIMMEE::Ossifragi imputat utilitas syrtes, utcunque suis spinosus amputatAugustus. Plane bellus saburre celeriter deciperet adlaudabilisapparatus bellis, quamquam fiducias miscere ad

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano construction chemicals last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.


AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’sconstruction chemicals are completely are highly durable,water repellent, UV resistant, fungus/algae/bacteriaresistant, for the making good all types of structuralsurfaces including metal and concrete, based upon multi-walled carbon nanotube technology.

• Rust RemoverSpecial Nano solution to remove rust from metal surface

• Shuttering OilSpecial Nano solution to give spl smoothness

• Nano AdmixtureWater reduction and high flexibility strength


Example Technical Data for the Admixture...

• 20% increase in flexibility and bond strength• Improved densities and impermeability• Reduced shrinkage• Improved tensile strength and crack resistance• Self curing concrete• Reduced thixotropy (more malleable)• Easier and quicker application and finishing• Reduced application problems• Reduced costs• Reduction in CO2 emissions


Nano Construction ChemicalsRRUUSSTT RREEMMOOVVAALL,, SSHHUUTTTTEERRIINNGG OOIILL,, CCOONNCCRREETTEE AADDMMIIXXTTUURREE

20% increase flexibility strengthUV Protection BarrierAnti-BacterialThermal Shock AbsorbingBreathable Eco Friendly(Hydrophobic) Water rolls-off the surfaceEasy Application/custom drying time Hygienic Barrier20-40% reduction in water mixImproved Quality of Surface

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Passed

Yes Contact angle 80 degrees

Yes Passed

Yes Passed

Yes Passed

Yes Passed

I-CanNano Admixture

24 25

AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Nanotechnology water based, ant-foul marine paints offer super hydrophobicity (less fuel consumption), are durable, water repellent, UV resistant, fungus/algae & bacteria/barnacle resistant, thermally insulating,elastomeric, and anti-sticking, for a wide variety of Metallic and GRP surfaces.

• Nano Antifouling PaintUnderwater Coat for ship bottom line with highanticorrosive properties.

• Nano Marine Universal PrimerUnlined internal surfaces on bulkheads of deckhouse

• Nano Marine coal tar epoxy PaintAbove water lining to protect steel, galvanisedsteel, has good water and chemical resistanceproperties

• Nano Marine anti-skid PaintPaint for exposed decks of deck houses, wheelhouse top with anti-skid property

• Nano Marine Top coat finish PaintFinish coat paint for superstructure, oil tank,engineering room with high anticorrosive, chemicalresistance properties


Example Technical Data for Marine Anti-Foul...

Mixing Ratio 2:1Viscosity 180” @23oCSp. Gravity 1.33% of solid contain by volume 66.5%Pot life 18 hoursMethod of application Brush/SprayApplication temperature 10-50oCApplication Viscosity (Spray) 30”@30oCDry film thickness (Brush) 30-40µCoverage (Brush or Spray) 120 sq ft/ltSurface Dry 1 hrTack Dry 3-4 hrsHard Dry 3 daysMinimum recoat time 4 hrsUV Stability 400+ hrsFinish Semi Gloss or GlossTemperature Resistance 150oCScratch Resistance 3 kg+Salt Spray 1000+ hrsHumidity 1000+ hrsImpact Resistance 20J+


Nano Marine PaintsPPRRIIMMEERR,, CCOOAALL TTAARR,, AANNTTII--SSKKIIDD,, TTOOPPCCOOAATT AANNDD AANNTTII--FFOOUULL PPAAIINNTTSS

TBT Free (Harmless to Marine Life)Zinc, Lead & Chrome Free (Harmless to Marine Life) Free of Biocides, Pesticides and other ToxinsContains Anti-Bacterial Nano MetalEnvironmentally Safe & Eco FriendlyFriction Co-efficientSuper Hydrophobicity gives Longlife GuaranteeLow Volatile Organic CompoundsAnti-StickingHigh UV, Corrosion, Impact & Scratch ResistantStatic Fouling & Foul Release PropertiesFuel & Emissions Savings

YesYesYesYesYesDecreased Co-efficientYesYesYesRobust/HighRobust/HighHigh

I-CanNano Anti-Foul


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Outstanding adhesion, high anti-corrosive (4500 hours of salt spray lab testing completed)• High resistance to weathering (UV, fungus, water, dirt, barnacles etc) and any blistering.• Smooth, high gloss, nano particle finish, provides abrasion resistance and lower surface friction.• Improved protection provides unsurpassed static fouling resistance and foul release properties.• Exceptional hold up and reduction in slime/barnacles delivers major fuel & emission savings.

IIDDEEAALL FFOORR::Can be applied to all GRP, Mild Steel, CI, DI, Aluminium, SS surfaces and Propellors. Not recommended for floors and decks.Optionally, we can also provide a thermally conductive version.

CCOOLLOOUURRSS AAVVAAIILLAABBLLEE::Colour of base is white. The base material may be tinted with universal colourants to a full range of custom colours. I-CanNano has 250+ colour shades and also a metallic finish.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::100–120 square feet per kg. Pot life is 18 hours. Stir well before using. Use brush or spray for application. 1 coat of Primer & 2 coats of Finish recommended.

DDRRYYIINNGG TTIIMMEE::Drying Time – Surface Dry 1 hour, Tack Dry 3-4 hours, HardDry 3 days. Drying time is variable depending ontemperature/humidity.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano marine paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.

* Subject to terms and conditions of use


26

Marine Anti-Foul 3Year Warranty*

27


TTHHEE PPRRAACCTTIICCAALL BBEENNEEFFIITTSS::• Electrically insulating paint (5000 V insulation strength), as well as resistance to fire.• Resistant to weathering, UV, fungus, water, dirt, as well as blistering, impact & scratching.• Pollutant Absorbent paint absorbs SOX, COX and NOX into porous honeycomb structure.• Soundproof and Heat Insulating paint uses nano engineered vacuum in every molecule.• High Thermal stability, low VOC, high coverage area, easy application.• Robust performance due to inorganic structurally defect-free nano-particles,

incorporated into the paint matrix.

IIDDEEAALL FFOORR::Electrically insulating be applied to all Mild Steel, CI, DI, Aluminium, SS surfaces. This includes electricalpanels, enclosures, housings etc. for safety & fire resistance. See technical data sheets for other products.

MMEETTHHOODD OOFF DDEELLIIVVEERRYY::Typically one coat primer and one coat finish. Use spray or brush for application.1 coat of Primer and 2 coats of Finish recommended.

PPRRAACCTTIICCAALL CCOOVVEERRAAGGEE::100–120 square feet per kg, depending on porosity of substrate.

DDRRYYIINNGG TTIIMMEE::Drying Time – Surface Dry 1 hour, Tack Dry 3-4 hours.

SSUUSSTTAAIINNAABBLLEE AANNDD EECCOO FFRRIIEENNDDLLYYNano specialist paints last considerably longer, are morerobust, anti-bacterial, are water and dirt repellent, offer low or no VOCs, and are kinder to the environment because they greatly reduce the need for raw material consumption.

LOWVOC



• Nano pollutant absorbent paintPaint for chimney, gaslines with pollutant absorbent

• Nano electrical insulating paint Paint with high electrical insulating property

• Nano thermal conducting paintPaint with high heat conducting property to be usedon compressors and other heat generating gadgets

• Nano water base soundproof & heat insulatingWater Base Soundproof & Heat insulating Paint for& heat insulating Paint plaster walls

• Nano water base wind blade paintWater base wind blade paint with anti-sticking formula for decreased friction


Example Technical Data for Electrically Insulation...

Mixing Ratio 2:1Viscosity 31” @23oCSp. Gravity 1.5% of solid contain by volume 76%Pot life 24 hoursMethod of application Brush/SprayApplication temperature 10-50oCApplication Viscosity (Spray) 30-50””@30oCDry film thickness (Brush) 35-40µCoverage (Brush or Spray) 130-140 sq ft/ltDrying Time Stoving @ 1250oC for 20’Minimum recoat time 1 hrsUV Stability 400+ hrsFinish Semi Gloss or GlossTemperature Resistance 150oCScratch Resistance 3 kg+Salt Spray 1000+ hrsHumidity 1000+ hrsImpact Resistance 20J+Electrical Insulation 5,000Volts


Nano Specialist PaintsSSOOUUNNDD,, HHEEAATT && EELLEECCTTRRIICCAALLLLYY IINNSSUULLAATTIINNGG,, TTHHEERRMMAALLLLYY CCOONNDDUUCCTTIINNGG,, PPOOLLLLUUTTAANNTT AABBSSOORRBBEENNTT

Water (Hydrophobic) & Dust RepellentElectrical Insulation StrengthAnti-Bacterial Nano MetalRobust Inorganic Nano-particle MatrixBetter Indoor Air QualityEco FriendlyReduced Cost/ApplicationLonglife Guarantee (1,000-4,000 Salt Hours)Hygienic BarrierAnti-Sticking & Anti-CorrosiveElastomeric (Stretchable Paint)Fire Resistant

Yes5000 V Robust/HighYesYesYesYesHighRobust/HighRobust/HighRobust/HighHigh

I-CanNano Electrically Insulating

28 29

AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’s Inks,offer a next generation solution to all your printing needs.We provide both solvent and water based solutions withlow VOC and super fast curing times. Our inks offerextraordinary bond strength, exceptionally good solventrelease and superior printability at higher head and pressspeeds.

Our range includes inks which are formulated for printingtreated polyethylene, polypropylene, PCB boards andmetal surfaces. Our inks offer high scratch resistance, areanti-bacterial, offer excellent gloss and high adhesion.

• U.V. Cured InkVery fast drying, extremely low VOC, hard wearing.

• Water base paste inkWater based printing ink for textiles and other surfaces.

• Surface InkIdeal for metal surfaces. These inks are made by mixing nano metallic powder/paste with inks.

• Lamination InkHigh bond strength, superior printability at higher speed.


Example Technical Data for Nano UV Cured Ink...

Viscosity by stormer Method of application Application temperature Application Viscosity Coverage Area Drying TimeMinimum recoat time Brushability Opacity UV Stability Gloss Water repellency Alkali Resistance

The technical information above is example specificationfor the named product only. For application information,and MSDS sheets for sepcific products please go towww.i-cannano.com

Nano InksNNEEWW GGEENNEERRAATTIIOONN FFAASSTT CCUURREE IINNKKSS


I-CanNano Inks

AAVVAAIILLAABBLLEE IINN DDIIFFFFEERREENNTT VVEERRSSIIOONNSS::Based on Chemical Nanotechnology, I-CanNano’sPowders can be used for the most demanding ofapplications. Highly durable, water repellent, UV resistant,fungus/algae/bacteria resistant, thermally insulating,extremely anti-corrosive (7,500 salt spray hours), ideal forall types of industrial use or problematic surfaces.

• Pure Epoxy Powder Coating - Matt Finish

• Hybrid Powder Coating -Glossy & Semi Gloss Finish

• Pure Polyster Powder Coating - Glossy & Semi Gloss Finish

• Structure Finish (hybrid) Powder Coating

• Texture Finish (hybrid) Powder Coating

• Metallic Finish Powder Coating

• Antique Finish Powder Coating


Example Technical Data for Interior Nano Powder...

Viscosity by stormer Method of application Application temperature Application Viscosity Coverage Area Drying TimeMinimum recoat time Brushability Salt Spray Test 7,500 hoursUV Stability Gloss Water repellency Alkali Resistance

The technical information above is example specificationfor the named product only. For application information,and MSDS sheets for sepcific products please go towww.i-cannano.com

Nano Powder PaintsHHIIGGHHLLYY RROOBBUUSSTT IIIINNDDUUSSTTRRIIAALL PPOOWWDDEERR CCOOAATTIINNGGSS


I-CanNano Powder Coatings

3130

i-cannano product brochure 2010

Documents

nano products

nano sealants

nano specialist paints

nano metal paints

nano wood paints

nano marine paints

nano water proofing

nano construction chemicals