i&c presentation
TRANSCRIPT
Capability Presentation
Instrumentation & Calibration
What We Do: Life of Field Services
Drilling Control Systems
Operational Assurance• BOP Services • Drilling Control Systems Assurance & Performance• After-market & Lifecycle Management
Production Equipment Systems
Production Optimisation• Flow Assurance & Sampling Solutions• Production Control & Safety Solutions• Asset Performance & Operational Integrity
Subsea Systems & Services
Production Enhancement & Asset Integrity
• Greenfield Development• Brownfield Extension, Upgrade & Optimisation• Life-of-field Support• Asset Life Extension
Business Division What We Offer Solutions & Services
EXPLORATION & DRILLING DEVELOPMENT & PRODUCTION DECOMMISSIONING & ABANDONMENT
Production Equipment Systems (PES)
21 3 4 5
6 7 8
PRODUCTS & SERVICES1. Wellhead Control Panels2. Oil & Gas Sampling Equipment
& Services3. Pressure Testing Equipment &
Services4. Chemical Injection Equipment &
Services5. Flushing Equipment & Services
6. Equipment Calibration7. Emergency Shutdown Systems8. Hydraulic Power Units9. Third Party Product Sales
WHAT WE OFFER: Production OptimisationWHAT WE OFFER: Production Optimisation
SOLUTIONS:• Flow Assurance & Sampling Solutions• Production Control & Safety Solutions• Asset Performance & Operational Integrity
9
1. Pressure Testing Services
2. Chemical Injection Systems& Services
3. Flushing Equipment & Management
4. Ancillary Equipment
5. Climate Controlled Laboratories
6. Temperature & Electrical Calibrations
7. Calibration & Repair of Metrology
Instruments
8. Equipment & Technician Bundled
Service Support
9. Internal & External Test Cells
10. Mobile Service Van Fleet
Equipment Rental & Cal-ibration Ser-
vices
10
Products & Services: At a Glance
6
7
8
9
1
2
3
4
5
Overview
Based at our dedicated service centres in Aberdeen and Great Yarmouth we hold an extensive inventory of general purpose or zone-rated equipment for control, monitoring, measurement and precision services.
We Offer:• Accuracy of equipment to industry standards• Minimal disruption as tests can be carried out on-site• Operational assurance and decreased downtime caused by control failure• Services tailored to meet the demands of our clients’ business
Offshore & Onsite Services - Calibration
• Pressure Relief Valves (up to 2758 Bar/40,000 psi on oil)
• Pressure Gauges (up to 2758 Bar/40,000 psi )
• Chart Recorders (up to 2758 Bar/40,000 psi )
• Transmitters/Transducers
• ATEX approved electrical technicians
• DSV gauge calibration with compressed air up to 350 bar
(5,000 psi) and hydraulic water up to 700 Bar (10,000 psi)
Experienced and skilled technicians to carry out standard calibration
• Proserv’s experienced engineers are fully trained to carry out calibrations onsite and offshore
• Reduced downtime and improved turnaround
• DSV calibration with compressed air up to 350 bar and hydraulic water up to 700 bar
Dive Support Vessel (DSV) Calibration
KEY FIGURES
Employees: Over 2,100
Global Footprint: 4 Regions 11 Countries 31 Sites
Offshore & Onsite Services
Technicians to carry out:
• Servicing and Repair of Pumps, HPU’s• Flushing Operations• Chemical Injection Services• Umbilical testing/monitoring – insulation
resistance, continuity resistance, TDR and pressure monitoring
• Hydrostatic Testing
All equipment provided in isolation from our extensive rental fleet including all ancillary requirements or as a bundled service with technician support to undertake scopes, servicing of existing units, provide technical advice, and surveys.
Full scope can be viewed on the UKAS website
Calibration Accreditation
UKAS accreditation for pressure related equipment from vacuum up to and including 60,000 psi:• Analogue and Digital Gauges• Chart Recorders and Data Logging Equipment• Dead Weight Piston and Weight Sets
UKAS accreditation for electrical recalibration for: • Transmitters/Transducers• Multimeters• MV/Ma Source Calibrators• Resistance Bridges• Earth Testers• Insulation Testers• RCD Testers• PAT Testers
Dimensional and Temperature Calibration
Torque measurement equipment from 10Nm to 1500 Nm:• Vernier Calipers• Internal and External Micrometers• Setting Rods• Thread Gauges• Ring Gauges etc
Temperature equipment:• Digital Temperature Indicators• Oil Temperature Bath• Temperature Probes• Dry Block Calibrators
Technical Certification Standards
• ISO 9001:2008• OPITO Approved Compressed Air Emergency
Breathing System (CA-EBS) Initial Deployment training
• OPITO Approved Basic Offshore Safety Induction and Emergency Training with HUET and EBS
• OPITO Approved Minimum Industry Safety Training
• Norwegian escape chute• ATEX certified • PAMAS certified• UKAS certified• IOSH certified• Haskel certified• Hydratron certified
Traceable - Traceability calibration makes sure the unit is within the factory specifications and is sufficient for many instruments. The instruments we use for calibration are calibrated to UKAS and the relevant standards, therefore ensuring this traceability
Technical Certification Standards Continued…
Accreditation by UKAS means that evaluators: testing
and calibration laboratories, inspection and certification
bodies have been assessed against internationally
recognised standards to demonstrate their competence,
impartiality and performance capability.
Manufacturers & Suppliers
• Viatran• Parker• Yokogawa• Hydratron• Stewart Buchanan
Proserv manufactures and services test systems incorporating all of our products to client requirements
Why Proserv?
Track Record Spanning over 40 years
Global Company Leverage pool of additional
resource, support & expertise
Vast inventory Equipment for sale, rental &
service
Our TeamHighly-experienced technicians
and dedicated account managers
Bespoke SolutionsManufactured and delivered to
exact client specifications
Service Provision24/7 Support