identification systems for industrial production control and mobile machines
TRANSCRIPT
101
Identification systems forindustrial production control
and mobile machines.
years
W
ARRANTY
on ifm products
ww
w.if
m.c
om
/gb
/id
enti
fica
tio
nId
enti
fica
tio
n s
yste
ms
HF system13.56 MHz
RFID systemDTM
LF system125 KHz
RFID systemDTS125
Opticalcode reader
Multicode readertype O2I
LF/HF system125 KHz13.56 MHz
UHF system868 MHz (EU)913 MHz (USA)
RFID systemDTE100
RFID systemDTE800
2
Identification systems from ifm electronic.The optimum solution for every requirement.
For industrialapplications
Systems formobile machines
Type overview
Range
Field
bus
Stora
ge cap
acity
tag
Hard ta
g, adap
ted to
the a
pplicat
ion co
ndition
Smar
t tag
,
low
-cost
adhes
ive ta
pe
–Identification inmobile machines.
–up to 100 mm AS-i 16 bitIdentificationin routingconveyors.
– –up to 2 m
RS232EthernetTCP/IP
Ethernet/IP
1D bar codes,2D Matrix
codes,Text
Identification of1D and 2D codes forthe monitoring ofprocess operations.
up to 10 mEthernetTCP/IP
EtherNet/IP
240 bit EPC512 bit user
up to 100 mm
SAP/ERP
Profibus DPProfinet DPEtherNet/IP
TCP/IPEthercat
8 KBIdentificationin conveyors.Large data volumes,high speed.
Identification inproduction and logistics.Long ranges,many tags.
100 mm CANopen 8 KB
3
Op
tica
lco
de
read
erR
FID
ro
uti
ng
con
veyo
rsR
FID
con
veyo
rsR
FID
pro
du
ctio
nan
d lo
gis
tics
RFI
D m
ob
ilem
ach
ines
4 - 5
6 - 7
8 - 9
10 - 11
12 - 13
14 - 15
4
High reading reliability:Automatic setting of theexposure time, adaptation bysegmented lighting for criticalsurfaces.
Intelligence in the sensor:Verifier system reduces datatransmission.
Flexible connection:RS-232, Ethernet TCP/IP andEthetnet/IP interface.
Quick in the process:Object speeds of up to 7 m/s.
Compact integration:Illumination, optics, evaluationand interfaces in an industriallycompatible housing.
Easy handling:The system is configured andready for use within a fewminutes – with PC software ordirectly on the sensor.
Multicode reader type O2IThe compact all-rounder.
The compact unit is installed using thesuitable mounting set and connectedto the controller (PLC) via the processinterface.Parameter setting is done via anEthernet cable using a common PC.
Powerfulidentification.
Independent oforientation andnumber of codesthe multicodereader automati-cally decodes1D and 2D codes.
The new versionalso solves OCRtasks, e.g. for pro-duct identificationby type design-ations or serialnumbers.All informationsuch as expirydate or productiondate can now beread directly.
Further functionsinclude the outputof the codeposition via theprocess interface,
For industrialapplications
5
Optimumillumination.
In addition to anautomatic expo-sure setting,manual adjustmentis also possible.Four lightingsegments can bedeactivated andactivated manu-ally. So optimumresults are achiev-ed even withhighly reflectivemetal surfaces.
The ifm multicode reader detectsnumerous 2D and 1D codes.The standardised 2D code can beapplied in different ways: printed onpaper, engraved by laser or dot-peened onto a metal surface.
One of many examples: Based on theData Matrix code, the multicodereader identifies hygienically packedcotton swabs on a conveyor beltdynamically.
O2I in theapplication.
The ifm multicodereader is used in awide range of in-dustrial applica-tions. It providesproduct tracking,production controlor product identi-fication in themost varied areas:automotive, elec-tronic and food in-dustries, conveyortechnology or inmachine tools andprinting machines.
The standardisedprocess interfacesRS-232, EthernetTCP/IP and Ether-Net/IP ensure fastand easy integra-tion in industrialcontrol techno-logy.
Further information atwww.ifm.com/gb/multicodereader
Orientation-independent identificationof 1D and 2D codes.
QR code
PDF code
DMC code
Bar code
Text
adjustable totalquality parame-ters, individualillumination set-tings for eachconfiguration in agroup, integratedfault memory andaccess protectionwith password.
The professionalsoftware of themulticode readertakes the highreading reliabilityof the Data Matrixcode to a newdimension.
Top choice forprice/performance:the multicodereader provideshigh functionalityand performanceat the price of asensor.
710377582942
Op
tica
lco
de
read
erR
FID
ro
uti
ng
con
veyo
rsR
FID
con
veyo
rsR
FID
pro
du
ctio
nan
d lo
gis
tics
RFI
D m
ob
ilem
ach
ines
6
Plug and play:Cost reduction with quick andeasy set-up.
Efficient:Connection of up to 31 RFIDreaders to one AS-i master.
Safe:High reading reliability forcompact design.
Ready for operationat once:No programming for read / writesystems with AS-Interface.The stored value is automaticallyprovided by the transponderwhen the antenna is passed.
Certified:The AS-Interface certificationguarantees interoperability inautomation technology.
RFID system DTS125Keep track of the workpiece.
Plug and Play also for the hardware:connection via M12 connector or AS-isplitter box. The DTS125 system canbe integrated into AS-i networks inno time and is ready for operationimmediately. In addition to the lowercost for hardware, this also saves timeduring set-up.
The DTS125 RFID system ensuressmooth logistics flow on a productionline for transmissions. All workpiececarriers can be identified by meansof RFID. Optical processes such as barcodes were eliminated due to thesevere operating conditions (oils,metal swarf).
The DTS125 RFidentificationsystem from ifm isan industriallycompatible identi-fication system in125 KHz techno-logy. It is the firstRFID system forAS-Interfaceworldwide.
The compact read /write heads in-clude, in additionto the antenna,the complete eva-luation and theinterface to AS-i. So the units can beoperated directlyon the AS-Inter-face and enabledata transmissionto the controller.
For industrialapplications
7
The RFID system DTS125 – ideal forsolving tasks in assembly and con-veying technology as well as in hand-ling automation. It detects objects ontransport systems at a travel speed ofup to 0.5 m/s.
ifm offers thesystem solutionapp “RFID DTA”for a particularease of handlingof the RFID dataand communica-tion with higher-level networks.Download andconfiguration ofthe app is madevia the integratedweb interface, i.e.all requiredsettings can beconveniently madeusing a device withinternet browser.
ID tags for assem-bly and conveyorsystems. The robusttransponders,which do notrequire any batter-ies, are particularlysuited for use inhigh temperatureranges.
filling systems.The system is alsothe optimumchoice for markingworkpiece carriers.
DTS125 in theapplication.
The DTS125 RFIDsystem has beendesigned forproduction controlin assembly andconveying technol-ogy, handling,packaging and
Further information atwww.ifm.com/gb/dts125
PLC
SmartPLC asgateway to thefieldbus
RFI
D r
ou
tin
gco
nve
yors
RFI
Dco
nve
yors
RFI
D p
rod
uct
ion
and
log
isti
csR
FID
mo
bile
mac
hin
esO
pti
cal
cod
e re
ader
ifm systemsolutions appRFID DTA
LF RFID system withintegrated AS-Interface.
8
Clear:Status display via LED andintegrated web server.
Flexible:Connection of RFID antennas ordigital inputs / outputs. Antennaand transponder combinations ofsome bits to several Kbytes.
Easy:Connection of the antennas withunshielded standard cables upto 20 m.
Integrable:Function blocks enable easyintegration into the higher levelautomation or process control.
Certified:The fieldbus certificationguarantees interoperability inautomation technology.
Robust:Protection rating IP 67 for harshindustrial environments.
RFID system DTE100The “electronic route card”.
The LF or HF read / write antennas inan industrially compatible housing aresimply connected to the evaluationunit via a standard M12 connector.
RFID system withevaluation unit,antennas andtransponders.
ifm electronic hasdeveloped a newRFID system forproduction andconveying in par-ticular.
The integratedweb server enableseasy parametersetting via theweb browser.The requirementsof harsh industrialenvironments aremet by a robusthousing, a widetemperaturerange and thehigh protectionrating IP 67.
Scan code and watch the video
on the DTE100 system!
For industrialapplications
9
The RFID evalua-tion units DTE10xhave four antennaconnections,which can alter-natively be used asdigital I/Os.The antennas areconnected viastandardisedM12 connectors.
The standard pinassignment of theI/O connectionsensures thatcommon sensorsor actuators aredirectly connectedand powered fromthe RFID evalua-tion unit.
LF and HFtransponder.
In addition to LFtransponders withup to 2-Kbit mem-ory, the productportfolio of ifmalso covers HFtransponders with8 Kbits as FRAMversion which canbe rewritten anunlimited numberof times.
Differentinterfaces.
DTE100 withProfibus DP: eva-luation unit withintegrated Profi-bus DP interface.
DTE101 withProfinet: Evalua-tion unit withintegrated Profinetinterface.
DTE102 withEtherNet/IP:evaluation unitwith integratedEtherNet/IPinterface.
DTE104 withTCP/IP andSAP/ERP connec-tivity: Ideal fordirect connectionto PCs, industrialPCs or PLCs thathave no standar-dised fieldbusinterface.Users can accessall connected an-tennas, sensorsand actuators viaTCP/IP protocol.
All connections are for standard M12connectors. Current is also directlysupplied via an M12 connection.The wide range of accessories suchas Profibus connection cables andterminating resistors facilitate thesystem set-up.
DTE100 in theapplication.
The RFID systemplatform is widelyused in productionfor identifyingtools or monitor-ing productionsteps.
Data can be savedand read in thetransponder as onan electronic routecard.
Further applica-tions can be foundin quality assur-ance, in the auto-motive industry aswell as in automa-tion and convey-ing.
Easy use andflexible parametersetting allow theuser to solve eachidentification taskprecisely andwithout any prob-lems.
Further information atwww.ifm.com/gb/dte100
PLC
RFID evaluationunit
Web browser
LF/HF RFID with integratedfieldbus interface.
Op
tica
lco
de
read
erR
FID
ro
uti
ng
con
veyo
rsR
FID
con
veyo
rsR
FID
pro
du
ctio
nan
d lo
gis
tics
RFI
D m
ob
ilem
ach
ines
TCP/IP SAP/ERP
10
Clear:Status display via LED andintegrated web server.
Flexible:Ultra low, low, mid and widerange antennas for everyapplication.
Easy:UHF evaluation unit with fourexternal antenna terminals.
Integrated:Ethernet TCP/IP and Ethernet IPinterface for parameter settingand data transmission.
Robust:The protection ratings IP 65 /IP 67 meet all requirements forharsh industrial environments.
RFID system DTE800Long ranges for
production and logistics.
UHF evaluationunits.
As components ofthe UHF systemplatform, theUHF evaluationunits DTE800 andDTE900 are comp-liant with the UHFbands in Europeand the USArespectively.The setting ofcorrespondingcountry profilesenables use of theunits in manyother countries.
The stationaryunits in the UHFrange allow longread / write rangeswith passive tags.
Up to 10 m:Wide range antenna for the simul-taneous detection of large quantities,e.g. boxes on pallets when gates arepassed.
Connection of4 antennas.
Only for ifm:UHF evaluation
unit with differenttypes of antenna,
also for mixed ope-ration. With Ether-
net interface anddigital inputs and
outputs.
For industrialapplications
11
Up to 2 m:Mid range antenna for the reliableidentification of larger units, e.g.on a conveyor belt.
Ultra low and lowrange antennas.
These antennasare designed toopeate in the nearfield. In order toachieve a highselectivity, thesmallest possibledesigns are usedenabling shortreading ranges.
Mid rangeantennas.
Due to its smallerdimensions themid range an-tenna is chosen forapplications in thenear / far fieldwith reading ran-ges of up to 2 m.
Wide rangeantennas.
With an angle ofaperture of 30°these antennashave been deve-loped for appli-cations in the farfield wherereading ranges ofup to 10 m arerequired.
Up to 20 cm:(Ultra) low range antenna for theselective detection of individualproducts in the close range.
DTE800 in theapplication.
The UHF systemplatform from ifmelectronic is usedin production,intralogistics andconveying due tothe application-specific antennas.
Goods such aspackaging orpallets can bedetected withoutcontact.
The UHF RFID isoptimised forapplications inproduction andmaterial flowcontrol, the assetand supply chainmanagement aswell as track &trace.
Further information atwww.ifm.com/gb/dte800
PLC
RFID evaluationunit
Systematic UHF RFID transparency.
Op
tica
lco
de
read
erR
FID
ro
uti
ng
con
veyo
rsR
FID
con
veyo
rsR
FID
pro
du
ctio
nan
d lo
gis
tics
RFI
D m
ob
ilem
ach
ines
12
Integrated:Antenna, evaluation andCANopen interface in a compactM18 or M30 housing.
Insensitive:Extended temperature range of-40...85 °C.
Approved:E1 type approval.
Robust:Optimised for outdoor use withIP 67 and IP 69K, shock resistantto EN60068-2-27, vibrationresistant to EN60068-2-64.
Compatibility:CANopen protocol, optimisedfor use with ifm ecomatmobilecontrollers.
RFID system DTMRobust and for mobile use.
RFID compactunit suitable formobile use.
The robust RFIDcompact unit withCANopen inter-face has beendeveloped foridentification tasksin agriculturalmachines, muni-cipal vehicles andconstructionmachines.
It can be used toautomaticallydetect differentattachments andconfigure thecorrespondingsettings in thecontroller.
Completeness check:The presence of different tools on thecorresponding fixtures is detected.
Systems formobile machines
13
This automaticidentification sim-plifies the creationof user-specificsystem set-ups.
Information onmaintenanceintervals and oper-ating times canautomatically begenerated andstored since thecontroller automa-tically detectswhen and howlong a specific ma-chine set-up runs.Downtime is keptto a minimum,productivity isincreased.
Identification of fittings and tools.This allows the detection and evalua-tion of operating times and mainten-ance intervals.
RFID compact unit withintegrated CANopen interface.
Further information atwww.ifm.com/gb/dtm
Op
tica
lco
de
read
erR
FID
ro
uti
ng
con
veyo
rsR
FID
con
veyo
rsR
FID
pro
du
ctio
nan
d lo
gis
tics
RFI
D m
ob
ilem
ach
ines
Different fittings are detected.The application parameters in thecontroller and in the operating devicesare automatically adjusted.
DTM in theapplication.
ifm as an automa-tion specialist hasknow-how ofmany years in thearea of mobilemachines, wherecontrol systems
and sensors fromifm have beenestablished in themarket.The competencesand experience ofthese both diffe-rent areas havenow been com-bined in the RFIDsolution formobile machines.
RFID evaluationunit and antenna
Control systemwith display
14
Operating distance [mm]
Field of view size [mm]
50
20 x 14 36 x 26 68 x 50
100 200
Order no. red light O2I300 O2I302
LF RFID system DTS125 · 125 KHzRead / write systems / antennas Order no.
RFID read / write system, AS-Interface, range max. 10 mm DTA100
RFID read system, AS-Interface, range max. 20 mm DTA101
RFID read / write system, AS-Interface, range max. 65 mm DTA200
RFID read system, AS-Interface, range max. 65 mm DTA201
O2I304
Order no. red light O2I350 O2I352 O2I354
Order no. infrared O2I301 O2I303 O2I305
Order no. infrared O2I351 O2I353 O2I355
50
46 x 32 77 x 56 140 x 100
100 200 200
40 x 30
RFID read / write system, AS-Interface, range max. 100 mm DTA300
RFID read system, AS-Interface, range max. 110 mm DTA301
Transponders Order no.
ID tag / M18 x 1 / 01 E80311
ID tag / Ø 12 x 2 / 01 E80312
ID tag / Ø 20 x 2.15 / 01 E80317
ID tag / Ø 30 x 2.15 / 01 E80318
ID tag / Ø 50 x 2.2 / 01 E80319
ID tag / ISO CARD / 01 E80320
Multicode reader type O2I
LF/HF RFID system DTE100 · 125 KHz · 13.56 MHzEvaluation units / antennas Order no.
RFID evaluation unit, Profibus DP DTE100
RFID evaluation unit, Profinet DP DTE101
RFID evaluation unit, EtherNet/IP DTE102
RFID evaluation unit, EtherCAT DTE103
RFID evaluation unit, Ethernet TCP/IP DTE104
RFID antenna 13.56 MHz, M12, flush installation ANT410
RFID antenna 13.56 MHz, M12, non-flush installation ANT411
RFID antenna 13.56 MHz, M18, flush installation ANT420
RFID antenna 13.56 MHz, M18, non-flush installation ANT421
RFID antenna 13.56 MHz, M30, flush installation ANT430
RFID antenna 13.56 MHz, M30, non-flush installation ANT431
RFID antenna 125 KHz, 66 x 40 x 40 mm ANT512
RFID antenna 13.56 MHz, 66 x 40 x 40 mm ANT513
RFID antenna 13.56 MHz, 48 x 20 x 7 mm, cable 1 m ANT515
RFID antenna 13.56 MHz, 48 x 20 x 7 mm, cable 2 m ANT516
Transponders Order no.
ID tag / Ø 30 x 2.5 / 05 – 125 KHz 256 bit E80360
ID tag / Ø 30 x 2.5 / 05 – 125 KHz 2048 bit E80361
ID tag / Ø 30 x 2.8 / 03 – 13.56 MHz 16 Kbit – FRAM E80370
ID tag / Ø 30 x 2.5 / 06 – 13.56 MHz 896 bit E80371
ID tag / Ø 20 x 2.5 / 06 – 13.56 MHz 896 bit E80377
ID tag / label 80 x 50 / 03 – 13.56 MHz 896 bit E80379
ID tag / Ø 30 x 2.8 / 03 – 13.56 MHz 64 Kbit E80380
ID tag / Ø 4,35 x 3.6 / 03 – 13.56 MHz 896 bit E80381
ID tag / label 65 x 30 / 03 – 13.56 MHz 896 bit E80382
ID tag / Ø 50 x 3.0 / 0 – 13.56 MHz 16 Kbit – FRAM E80383
200 x 150 400 x 300
1000 2000
Identification systems from ifm electronic.The choice is yours.
For industrialapplications
Systems formobile machines
15
All types at a glance.
UHF RFID system DTE800 · 868 MHz (EU) · 913 MHz (USA)Evaluation units Order no.
RFID UHF evaluation unit, Ethernet TCP/IP EU/ETSI DTE800
RFID UHF evaluation unit, Ethernet TCP/IP US/FCC DTE900
RFID UHF evaluation unit, EtherNet/IP EU/ETSI DTE810
RFID UHF evaluation unit, EtherNet/IP US/FCC DTE910
RFID UHF sensor, Ethernet TCP/IP DTE820
Antennas
RFID UHF low range antenna, EU/ETSI
RFID UHF ultra low range antenna, EU/ETSI/US/FCC
RFID UHF low range antenna, US/FCC
RFID UHF mid range antenna, EU/ETSI/US/FCC
RFID UHF mid range antenna, US/FCC
RFID system DTM · 13.56 MHzEvaluation units Order no.
RFID evaluation unit / antenna 13.56 MHz, M18,CANopen interface, flush installation DTM424
RFID evaluation unit / antenna 13.56 MHz, M18,CANopen interface, non-flush installation DTM425
RFID evaluation unit / antenna 13.56 MHz, M30,CANopen interface, flush installation DTM434
RFID evaluation unit / antenna 13.56 MHz, M30,CANopen interface, non-flush installation DTM435
BasicDisplay XL 4.3", CAN interface CR0452
Transponders Order no.
ID tag / Ø 30 x 2.8 / 03 – 13.56 MHz 16 Kbit – FRAM E80370
ID tag / Ø 30 x 2.5 / 06 – 13.56 MHz 896 bit E80371
ID tag / Ø 20 x 2.5 / 06 – 13.56 MHz 896 bit E80377
ID tag / Ø 30 x 2.8 / 03 – 13.56 MHz 64 Kbit E80380
ID tag / Ø 4.35 x 3.6 / 03 – 13.56 MHz 896 bit, 10 pcs. E80381
ID tag / label 65 x 30 / 03 – 13.56 MHz 896 bit, 500 pcs. E80382
ID tag / label 80 x 50 / 03 – 13.56 MHz 896 bit, 500 pcs. E80379
Order now?
Visit our e-shop at
www.ifm.com
Order no.
ANT805
ANT810
ANT910
ANT815
ANT920
RFID UHF mid range antenna, 100°/100° EU/ETSI
RFID UHF wide range antenna, 70°/70° EU/ETSI
RFID UHF wide range antenna, 70°/70° US/FCC
ANT820
ANT830
ANT930
Transponders
RFID-UHF on metal ID tag / Ø 55 x 13 / 04
RFID-UHF ID tag / Ø 50 x 3.3 / 04
ID tag / Ø 30 x 10 / 04
ID tag / Ø 40 x 10 / 04
Order no.
E80350
E80351
E80353
E80354
More designs at www.ifm.com
Control system with display Order no.
Visit our website:
www.ifm.com
ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-mail [email protected]
Over 70 locations worldwide –at a glance at www.ifm.com
Position sensors
Sensors formotion control
Industrial imaging
Safety technology
Process sensors
Condition monitoringsystems
Industrialcommunication
Identification systems
Systems formobile machines
Connectiontechnology
Overviewifm product range:
Accessories
ifm a
rtic
le n
o. 7
8001
716
· We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
· Pr
inte
d in
Ger
man
y on
non
-chl
orin
e bl
each
ed p
aper
. 09
/15