iec list

Worldwide Standards Plus Issue 98-08Reproduced from Information Handling Services®Fri Aug 27 15:07:13 1999

Your results are based on the following search criteria: Organization: iec

IEC 60091/131 (DRAFT) Printed Board Assemblies - Part 1: GenericSpecification - Soldered Electrical and ElectronicAssemblies Using Surface Mount and Related AssemblyTechnologies

IEC 1997 IEC Yearbook World Standards for Electricaland Electronic Engineering

IEC IEC Directory 1993 IEC KWIC INDEX of International Standards 1993 Sixth

Edition IEC Electricity, Electronics and Telecommunications

Multilingual Dictionary Volume 1: English-French-Russian-German- Spanish-Dutch-Italian-Swedish-Polish Second Edition

IEC Electricity, Electronics and TelecommunicationsMultilingual Dictionary Volume 2: English-French-Russian-German-Spanish- Dutch-Italian-Swedish-Polish Second Edition

IEC Electricity, Electronics and TelecommunicationsMultilingual Dictionary Volume 3: German, Dutch andSwedish Indexes Second Edition

IEC Electricity, Electronics and TelecommunicationsMultilingual Dictionary Volume 4: Spanish andItalian Indexes Second Edition

IEC Electricity, Electronics and TelecommunicationsMultilingual Dictionary Volume 5: Russian andPolish Indexes Second Edition

IEC Letter Symbols Reprint - 1984 IEC Vocabulary of Fundamental Concepts IEC 60050 GROUP 30 International Electrotechnical Vocabulary Group

30: Electric Traction Second Edition IEC 60050 GROUP 31 International Electrotechnical Vocabulary Group

31: Signalling and Security Apparatus for RailwaysSecond Edition

IEC 60050 GROUP 55 International Electrotechnical Vocabulary Group55: Telegraphy and Telephony Second Edition

IEC 60050 GROUP 60 International Electrotechnical Vocabulary Group60: Radiocommunications Second Edition; Corrigenda-1970

IEC 86-3 Primary Batteries - Part 3: Watch Batteries FirstEdition

IEC 646 Information Technology - ISO 7-Bit Coded CharacterSet for Information Interchange Third Edition

IEC 821 IEC 821 VMEbus - Microprocessor System Bus for 1Byte to 4 Byte Data Second Edition

IEC DIS 1539-1 (DRAFT) Information Technology - ProgrammingLanguages - FORTRAN - Part 1: Form Specification ***CD-ROM ONLY***

IEC 1539-1 Information Technology - Programming Languages - FORTRAN - Part 1: Basic Language First Edition

IEC 1539-2 Information Technology - Programming Languages - FORTRAN - Part 2: Varying Length CharacterStrings First Edition

IEC 1863 Information Processing - 9-Track, 12,7 mm (0,5 in) Wide Magnetic Tape for Information InterchangeUsing NRZ1 at 32 ftpmm (800 ftpi) - 32 cpmm (800cpi) Second Edition

IEC 1864 Information Technology - Unrecorded 12,7 mm (0,5in) Wide Magnetic Tape for Information Interchange - 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200ftpi) Phase Encoded and 356 ftpmm (9 042 ftpi), NRZ1 Fourth Edition; CEN EN 21864: 1993

IEC 2022 Information Technology - Character Code Structureand Extension Techniques Fourth Edition

IEC DIS 2110 (DRAFT) Information Technology - Data


Communication - 25-Pole DTE/DCE Interface Connectorand Contact Number Assignments ***CD-ROM ONLY***

IEC 2382-1 Information Technology - Vocabulary - Part 1: Fundamental Terms Third Edition

IEC DIS 2382-1.2 (DRAFT) Information Technology - Vocabulary - Part1: Fundamental Terms Revision of ISO 2382-1: 1984 ***CD-ROM ONLY***

IEC DIS 2382-7 (DRAFT) Information Technology - Vocabulary - Part7: Computer Programming ***CD-ROM ONLY***

IEC 2382-7 Information Technology - Vocabulary - Part 07: Computer Programming Second Edition

IEC DIS 2382-8.2 (DRAFT) Information Technology - Vocabulary - Part8: Security ***CD-ROM ONLY***

IEC 2382-9 Information Technology - Vocabulary - Part 9: DataCommunication Second Edition

IEC 2382-13 Information Technology - Vocabulary - Part 13: Computer Graphics Second Edition

IEC 2382-14 Information Technology - Vocabulary - Part 14: Reliability, Maintainability and AvailabilitySecond Edition

IEC DIS 2382-15 (DRAFT) Information Technology - Vocabulary - Part15: Programming Languages ***CD-ROM ONLY***

IEC 2382-16 Information Technology - Vocabulary - Part 16: Information Theory Second Edition

IEC 2382-17 Information Technology - Vocabulary - Part 17: Databases First Edition

IEC 2382-20 Information Technology - Vocabulary - Part 20: System Development First Edition

IEC 2382-23 Information Technology - Vocabulary - Part 23: TextProcessing First Edition

IEC 2382-24 Information Technology - Vocabulary - Part 24: Computer-Integrated Manufacturing First Edition

IEC 2382-25 Information Technology - Vocabulary - Part 25: Local Area Networks First Edition

IEC 2382-26 Information Technology - Vocabulary - Part 26: OpenSystems Interconnection First Edition

IEC 2382-27 Information Technology - Vocabulary - Part 27: Office Automation First Edition

IEC 2382-28 Information Technology - Vocabulary - Part 28: Artificial Intelligence - Basic Concepts and ExpertSystems First Edition

IEC 2382-31 Information Technology - Vocabulary - Part 31: Artificial Intelligence - Machine Learning FirstEdition

IEC 2593 Information Technology - Telecommunications andInformation Exchange between Systems - 34-Pole DTE/DCE Interface Connector Mateability Dimensions andContact Number Assignments Third Edition

IEC 3309 Information Technology - Telecommunications andInformation Exchange between Systems - High-LevelData Link Control (HDLC) Procedures - FrameStructure Fifth Edition; CAN/CSA-ISO/IEC 3309: 1995

IEC 3309 DRAFT AMD 3 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - FrameStructure Amendment 3: Seven-Bit Data PathTransparency Option for Start/Stop Transmission1992 ***CD-ROM ONLY***

IEC 3309 DRAFT AMD 4 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - FrameStructure Amendment 4: Optical Range of FSCChecking 1995 ***CD-ROM ONLY***

IEC 3788 Information Processing - 9-Track, 12,7 mm (0,5 in)


Wide Magnetic Tape for Information InterchangeUsing Phase Encoding at 126 ftpmm (3 200 ftpi) - 63cpmm (1 600 cpi) Second Edition

IEC 4335 Information Technology - Telecommunications andInformation Exchange between Systems - High-LevelData Link Control (HDLC) Procedures - Elements ofProcedures Fifth Edition; Amendment 6-1995; Amendment 7-1995

IEC 4335 DRAFT AMD 8 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - Elements of Procedures Amendment 8: UnnumberedInformation Frame with Header Check (UIH) Commandand Response 1995 ***CD-ROM ONLY***

IEC 4335 DRAFT AMD 9 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - Elements of Procedures Amendment 9: Span ListEncoding of the Information Field in the Multi-SREJFrame 1995 ***CD-ROM ONLY***

IEC 4873 Information Technology - ISO 8-Bit Code forInformation Interchange - Structure and Rules forImplementation Third Edition

IEC 6329 Duplicators and Document Copying Machines - SymbolsFirst Edition

IEC TR 6371 Information Processing - Interchange Practices andTest Methods for Unrecorded InstrumentationMagnetic Tape First Edition

IEC 6429 Information Technology - Control Functions forCoded Character Sets Third Edition

IEC 6522 Information Technology - Programming Languages - PL/I General Purpose Subset Second Edition

IEC DIS 6523-1 (DRAFT) Information Technology - Structure for theIdentification of Organizations and OrganizationParts - Part 1: Identification of OraganizationIdentification Schemes ***CD-ROM ONLY***

IEC DIS 6523-2 (DRAFT) Information Technology - Structure for theIdentification of Organizations and OrganizationParts - Part 2: Registration of OraganizationIdentification Schemes ***CD-ROM ONLY***

IEC 6523 AMD 1 Data Interchange - Structure for the Identificationof Organizations Amendment 1: Guidance on the Useof ISO 6523; (1994)

IEC DIS 6592 (DRAFT) Information Technology - Guidelines for theDocumentation of Computer-Based ApplicationSystems ***CD-ROM ONLY***

IEC 6937 Information Technology - Coded Graphic CharacterSet for Text Communication - Latin Alphabet SecondEdition

IEC 7185 Information Technology - Programming Languages - Pascal Second Edition; CEN EN 27185: 1992; CAN/CSA-ISO/IEC 7185-95

IEC 7350 Information Technology - Registration ofRepertoires of Graphic Characters from ISO/IEC10367 Second Edition

IEC 7478 Corrigendum 1 Information Processing Systems - DataCommunication - Multilink Procedures

IEC 7480 Information Technology - Telecommunications andInformation Exchange between Systems - Start-StopTransmission Signal Quality at DTE/DCE InterfacesSecond Edition; AS/NZS 3618: 1993; CAN/CSA-ISO/IEC7480-95

IEC 7487-1 Information Technology - Data Interchange on 130mm (5,25 in) Flexible Disk Cartridges Using


Modified Frequency Modulation Recording at 7 958ftprad, 1,9 tpmm (48 tpi), on Both Sides - ISO Type202 - Part 1: Dimensional, Physical and MagneticCharacteristics Second Edition; CAN/CGSB-186.78-93

IEC 7498-1 Information Technology - Open SystemsInterconnection - Basic Reference Model: the BasicModel Second Edition; CEN EN ISO/IEC 7498-1: 1995; CAN/CSA-ISO/IEC 7498-1-95; Corrected and Reprinted - 1996; AS/NZS 2777.1: 1996

IEC 7498-3 Information Technology - Open SystemsInterconnection - Basic Reference Model: Naming andAddressing Second Edition

IEC 7498-4 Information Processing Systems - Open SystemsInterconnection - Basic Reference Model - Part 4: Management Framework First Edition

IEC 7501-1 Identification Cards - Machine Readable TravelDocuments - Part 1: Machine Readable Passport ThirdEdition

IEC 7501-2 Identification Cards - Machine Readable TravelDocuments - Part 2: Machine Readable Visa SecondEdition

IEC 7501-3 Identification Cards - Machine Readable TravelDocuments - Part 3: Machine Readable OfficialTravel Documents First Edition

IEC 7776 Information Technology - Telecommunications andInformation Exchange between Systems - High-LevelData Link Control Procedures - Description of theX.25 LAPB-Compatible DTE Data Link ProceduresSecond Edition; Amendment 1-11/15/1996

IEC 7809 Information Technology - Telecommunications andInformation Exchange Between Systems - High-LevelData Link Control (HDLC) Procedures - Classes ofProcedures Third Edition; Amendment 10-1995; CAN/CSA-ISO/IEC 7809-95

IEC 7809 DRAFT AMD 9 (DRAFT) Information Technology - Telecommunicationsand Information Exchange Between Systems - High-Level Data Link Control (HDLC) Procedures Classesof Procedures Amendment 9: Seven-Bit Data PathTransparency Option for Start/Stop Transmission1992 ***CD-ROM ONLY***

IEC 7809 DRAFT AMD 11 (DRAFT) Information Technology - Telecommunicationsand Information Exchange Between Systems - High-Level Data Link Control (HDLC) Procedures - Classesof Procedures Amendment 11: Unnumbered InformationFrame with Header Check (UIH) Command and Response1995 ***CD-ROM ONLY***

IEC 7809 DRAFT AMD 12 (DRAFT) Information Technology - Telecommunicationsand Information Exchange Between Systems - High-Level Data Link Control (HDLC) Procedures - Classesof Procedures Amendment 12: Span List Encoding ofthe Information Field in the Multi-SREJ Frame 1995 ***CD-ROM ONLY***

IEC 7810 Identification Cards - Physical CharacteristicsSecond Edition; CEN EN ISO/IEC 7810: 1996

IEC 7811-1 Identification Cards - Recording Technique - Part1: Embossing First Edition; CEN EN ISO/IEC 7811-1: 1996

IEC 7811-2 Identification Cards - Recording Technique - Part2: Magnetic Stripe Second Edition; CEN EN ISO/IEC7811-2: 1996

IEC 7811-3 Identification Cards - Recording Technique - Part3: Location of Embossed Characters on ID-1 CardsSecond Edition; CEN EN ISO/IEC 7811-3: 1996

IEC 7811-4 Identification Cards - Recording Technique - Part4: Location of Read-Only Magnetic Tracks - Tracks 1


and 2 Second Edition; CEN EN ISO/IEC 7811-4: 1996 IEC 7811-5 Identification Cards - Recording Technique - Part

5: Location of Read-Write Magnetic Track - Track 3Second Edition; CEN EN ISO/IEC 7811-5: 1996

IEC 7811-6 Identification Cards - Recording Technique - Part6: Magnetic Stripe - High Coercivity First Edition

IEC 7812-1 Identification Cards - Identification of Issuers - Part 1: Numbering System Third Edition

IEC 7812-2 Identification Cards - Identification of Issuers - Part 2: Application and Registration ProceduresThird Edition

IEC 7813 Identification Cards - Financial Transaction CardsFourth Edition; Amendment 1-1996; CEN EN ISO/IEC7813: 1996

IEC DIS 7816-1 (DRAFT) Identification Cards - IntegratedCircuit(s) Cards with Contacts - Part 1: PhysicalCharacteristics ***CD-ROM ONLY***

IEC DIS 7816-2 (DRAFT) Information Technology - IdentificationCards - Integrated Circuit(s) Cards with Contacts - Part 2: Dimensions and Location of the Contacts ***CD-ROM ONLY***

IEC DIS 7816-3 (DRAFT) Information Technology - IndentificationCards - Integrated Circuit(s) Cards with Contacts - Part 3: Electronic Signals and TransmissionProtocols ***CD-ROM ONLY***

IEC 7816-3 Information Technlogy - Identification Cards - Integrated Circuit(s) Cards with Contacts - Part3: Electronic Signals and Transmission ProtocolsSecond Edition

IEC 7816-4 Information Technology - Identification Cards - Integrated Circuit(s) Cards with Contacts - Part4: Interindustry Commands for Interchange FirstEdition; Amendment 1-1997

IEC 7816-5 Identification Cards - Integrated Circuit(s) Cardswith Contacts - Part 5: Numbering System andRegistration Procedure for Application IdentifiersFirst Edition; CEN EN ISO/IEC 7816-5: 1995; Amendment 1-1996

IEC 7816-5 DRAFT AMD 1 (DRAFT) Identification Cards - IntegratedCircuit(s) Cards with Contacts - Part 5: NumberingSystem and Registration Procedure for ApplicationIdentifiers Amendment 1 1995; ***CD-ROM ONLY***

IEC 7816-6 Identification Cards - Integrated Circuit(s) Cardswith Contacts - Part 6: Interindustry Data ElementsFirst Edition; Technical Corrigendum 1-1998

IEC DIS 7816-7 (DRAFT) Information Technology - IndentificationCards - Integrated Circuit(s) Cards with Contacts - Part 7: Interindustry Commands for StructuredCard Query Language (SCQL) ***CD-ROM ONLY***

IEC 7826-1 Information Technology - General Structure for theInterchange of Code Values - Part 1: Identificationof Coding Schemes First Edition

IEC 7826-2 Information Technology - General Structure for theInterchange of Code Values - Part 2: Registrationof Coding Schemes First Edition

IEC 7942-1 Information Technology - Computer Graphics andImage Processing - Graphical Kernel System (GKS) - Part 1: Functional Description Second Edition; CEN ISO/IEC 7942-1: 1995

IEC 7942-2 Information Technology - Computer Graphics andImage Processing - Graphical Kernel System (GKS) - Part 2: NDC Metafile First Edition

IEC FDIS 7942-4 (DRAFT) Information Technology - Computer Graphicsand Image Processing - Graphical Kernel System


(GKS) - Part 4: Picture Part Archive ***CD-ROMONLY***

IEC 8072 Information Technology - Open SystemsInterconnection - Transport Service DefinitionThird Edition; CAN/CSA-ISO/IEC 8072-95; CEN EN ISO/IEC 8072: 1995

IEC 8072 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Transport Service DefinitionAmendment 1: Addition of Connectionless-ModeMulticast Services 1994; ***CD-ROM ONLY***

IEC 8072 DRAFT AMD 2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - OpenSystems Interconnection - Transport ServiceDefinition Amendment 2: Protection Quality ofService 1994 ***CD-ROM ONLY***

IEC 8073 Information Technology - Open SystemsInterconnection - Protocol for Providing theConnection-Mode Transport Service Fourth Edition

IEC 8073 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - OpenSystems Interconnection - Protocol for Providingthe Connection-Mode Transport Service Amendment 1: Relaxation of Class Conformance Requirements andExpedited Data Service Feature Negotiation 1997; ***CD-ROM ONLY***

IEC 8073 DRAFT AMD 5 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - OpenSystems Interconnection - Protocol for Providingthe Connection-Mode Transport Service Amendment 5: Provision of Non-Blocking Expedited Data Service1994 ***CD-ROM ONLY***

IEC 8208 Information Technology - Data Communications - X.25Packet Layer Protocol for Data Terminal EquipmentThird Edition

IEC 8211 Information Processing - Specification for a DataDescriptive File for Information Interchange SecondEdition; AS/NZS 3654: 1996

IEC 8326 Information Technology - Open SystemsInterconnection - Session Service Definition SecondEdition

IEC DIS 8326 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Session Service DefinitionAmendment 2: Efficiency Enhancements; (1996) ***CD-ROM ONLY***

IEC 8326 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Session Service DefinitionAmendment 2: Nested Connections Functional Unit ***CD-ROM ONLY***; 1998

IEC 8327-1 Information Technology - Open SystemsInterconnection - Connection-Oriented SessionProtocol: Protocol Specification Second Edition

IEC 8327-1 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Connection-Oriented SessionProtocol: Protocol Specification Amendment 2: Nested Connections Functional Unit ***CD-ROMONLY***; 1998

IEC 8327-2 Information Technology - Open SystemsInterconnection - Connection-Oriented SessionProtocol: Protocol Implementation ConformanceStatement (PICS) Proforma First Edition

IEC 8348 Information Technology - Open SystemsInterconnection - Network Service Definition ThirdEdition

IEC 8348 DRAFT AMD 4 (DRAFT) Information Processing Systems - DataCommunications - Network Service Definition


Amendment 4: Removal of the Preferred DecimalEncoding of the NSAP Address 1991;***CD-ROM ONLY***

IEC 8348 DRAFT AMD 7 (DRAFT) Information Technology - Open SystemsInterconnection - Network Service DefinitionAmendment 7: Addition of Connectionless-ModeMulticast Service CCITT RECMN X.213; 1994 ***CD-ROMONLY***

IEC 8348 DRAFT AMD 8 (DRAFT) Information Technology - Open SystemsInterconnection - Network Service DefinitionAmendment 8: Protection Quality of Service (QOS) Parameters 1994;***CD-ROM ONLY***

IEC 8441-1 Information Technology - High Density DigitalRecording (HDDR) - Part 1: Unrecorded Magnetic Tapefor (HDDR) Applications First Edition

IEC 8441-2 Information Technology - High Density DigitalRecording (HDDR) - Part 2: Guide for InterchangePractice First Edition

IEC 8473-1 Information Technology - Protocol for Providing theConnectionless-Mode Network Service: ProtocolSpecification First Edition; CCITT RECMN X.233; Amendment 1-1995; Amendment 2-1994; Amendment3-1994

IEC 8473-2 Information Technology - Protocol for Providing theConnectionless-Mode Network Service - Part 2: Provision of the Underlying Service by an ISO/IEC8802 Subnetwork First Edition

IEC 8473-3 Information Technology - Protocol for Providing theConnectionless-Mode Network Service: Provision ofthe Underlying Service by an X.25 Subnetwork FirstEdition

IEC 8473-4 Information Technology - Protocol for Providing theConnectionless-Mode Network Service: Provision ofthe Underlying Service by a Subnetwork ThatProvides the OSI Data Link Service First Edition

IEC 8473-5 Information Technology - Protocol for Providing theConnectionless-Mode Network Service: Provision ofthe Underlying Service by ISDN Circuit-Switched B-Channels First Edition

IEC 8480 Information Technology - Telecommunications andInformation Exchange between Systems - DTE/DCEInterface Back-Up Control Operation Using ITU-TRecommendation V.24 Interchange Circuits SecondEdition

IEC 8481 Information Technology - Telecommunications andInformation Exchange between Systems - DTE to DTEDirect Connections Second Edition

IEC 8482 Information Technology - Telecommunications andInformation Exchange between Systems - Twisted PairMultipoint Interconnections Second Edition

IEC 8571-1 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 1: General Introduction FirstEdition; Amendment 1: 1992; Amendment 2: 1993; Corrigendum 1: 1991

IEC 8571-2 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 2: Virtual Filestore DefinitionFirst Edition; Amendment 1: 1992; Amendment 2: 1993; Corrigendum 1: 1991

IEC 8571-3 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 3: File Service Definition FirstEdition; Amendment 1- 1992; Amendment 2- 1993; Corrigendum 1- 1991; Corrigendum 2- 1992

IEC 8571-3 DRAFT AMD 3 (DRAFT) Information Processing Systems - Open


Systems Interconnection - File Transfer, Access andManagement - Part 3: File Service DefinitionAmendment 3: Service Enhancement; (1992) ***CD-ROMONLY***

IEC 8571-4 AMD 1 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 4: File Protocol SpecificationAmendment 1: Filestore Management; (1992)

IEC 8571-4 AMD 2 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 4: Fire Protocol SpecificationAmendment 2: Overlapped Access; (1993)

IEC 8571-4 AMD 4 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 4: File Protocol SpecificationAmendment 4; (1992)

IEC 8571-4 AMD 4 CORR 1 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 4: File Protocol SpecificationAmendment 4: Technical Corrigendum 1 (1995)

IEC 8571-4 CORR 1 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 4: File Protocol Specification; (1992)

IEC 8571-4 DRAFT AMD 3 (DRAFT) Information Processing Systems - OpenSystems Interconnection - File Transfer, Access andManagement - Part 4: File Protocol SpecificationAmendment 3: Service Enhancement 1992 ***CD-ROMONLY***

IEC 8571-5 Information Processing Systems - Open SystemsInterconnection - File Transfer, Access andManagement - Part 5: Protocol ImplementationConformance Statement Proforma First Edition; AS/NZS 3646.5: 1994

IEC 8602 Information Technology - Protocol for Providing theOSI Connectionless-Mode Transport Service SecondEdition; Amendment 1-1996

IEC 8613-1 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: Introduction and General Principles Second Edition

IEC 8613-1 DRAFT AMD 3 (DRAFT) Information Processing - Text and OfficeSystems - Office Document Architecture (ODA) andInterchange Format - Part 1: Introduction andGeneral Principles Amendment 3: Annex H: Recordingof Documents Conforming to ISO 8613 onInterchangeable Storage Media 1992;***CD-ROMONLY***

IEC 8613-2 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: DocumentStructures Second Edition

IEC 8613-3 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: AbstractInterface for the Manipulation of ODA DocumentsFirst Edition

IEC 8613-4 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: DocumentProfile Second Edition

IEC 8613-5 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: OpenDocument Interchange Format Second Edition

IEC 8613-6 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: Character Content Architectures Second Edition

IEC 8613-6 DRAFT AMD 1 (DRAFT) Information Technology - Open DocumentArchitecture (ODA) and Interchange Format:


Character Content Architectures Amendment 1: Extensions for Coloured Lines and Emphasis 1995 ***CD-ROM ONLY***

IEC 8613-7 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: RasterGraphics Content Architectures Second Edition

IEC 8613-7 DRAFT AMD 1 (DRAFT) Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: RasterGraphics Content Architectures Amendment 1: Additional Content Codings for Bi-Level and Muti-Level Images 1997; ***CD-ROM ONLY***

IEC 8613-8 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: Geometric Graphics Content Architectures SecondEdition

IEC 8613-8 DRAFT AMD 1 (DRAFT) Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: Geometric Graphics Content Architectures Amendment1 1995;***CD-ROM ONLY***

IEC 8613-8 DRAFT AMD 1.2 (DRAFT) Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: Geometric Graphics Content Architectures Amendment1 1995 ***CD-ROM ONLY***

IEC 8613-9 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: AudioContent Architectures First Edition

IEC 8613-10 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format - Part10: Formal Specifications Second Edition

IEC 8613-11 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: TabularStructures and Tabular Layout First Edition

IEC 8613-12 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: Identification of Document Fragments First Edition

IEC DIS 8613- 12.2 (DRAFT) Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: Identification of Document Fragments ***CD-ROMONLY***

IEC 8613-14 Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: TemporalRelationships and Non-Linear Structures FirstEdition

IEC DIS 8613-14 (DRAFT) Information Technology - Open DocumentArchitecture (ODA) and Interchange Format - Part14: Temporal Relationships and Non-LinearStructures ***CD-ROM ONLY***

IEC DIS 8613- 14.2 (DRAFT) Information Technology - Open DocumentArchitecture (ODA) and Interchange Format: TemporalRelationships and Non-Linear Structures ***CD-ROMONLY***

IEC 8613 DRAFT AMD 5 (DRAFT) Information Processing - Text and OfficeSystems - Office Document Architecture (ODA) andInterchange Format - Amendment 5: Streams 1991;***CD-ROM ONLY***

IEC 8630-2 CORR 1 Information Processing - Data Interchange on 130mm (5.25 in) Flexible Disk Cartridges UsingModified Frequency Modulation Recording at 13 262ftprad, on 80 Tracks on Each Side - Part 2: TrackFormat A for 77 Tracks 1992; CEN EN 28630-2/A1: 1992

IEC 8630-3 CORR 1 Information Processing - Data Interchange on 130mm (5.25 in) Flexible Disk Cartridge Using ModifiedFrequency Modulation Recording at 13 262 ftprad, on80 Tracks on Each Side - Part 3: Track Format B for


80 Tracks; (1992) IEC 8631 Information Technology - Program Constructs and

Conventions for Their Representation SecondEdition; CEN EN 28631: 1993; NZS/ISO/IEC 8631: 1989

IEC 8632-1 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of PictureDescription Information - Part 1: FunctionalSpecification Second Edition; FIPS PUB 128-1: 1993; CEN EN 28632-1: 1994; Amendment 1-1994; Amendment 2-1995; BS EN 28632-1: 1994

IEC 8632-2 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of PictureDescription Information - Part 2: CharacterEncoding Second Edition; Amendment 1-1994; Amendment 2-1995

IEC 8632-3 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of PictureDescription Information - Part 3: Binary EncodingSecond Edition; Amendment 1- 1994; Amendment 2-1995

IEC 8632-4 Information Technology - Computer Graphics - Metafile for the Storage and Transfer of PictureDescription Information - Part 4: Clear TextEncoding SEcond Edition; Amendment 1-1994; Amendment 2-1995

IEC 8648 Information Processing Systems - Open SystemsInterconnection - Internal Organization of theNetwork Layer First Edition; Corrigendum 1-1991

IEC 8649 Information Technology - Open SystemsInterconnection - Service Definition for theAssociation Control Service Element SecondEdition; Amendment 1-1997

IEC DIS 8650-1 (DRAFT) Information Technology - Open SystemsInterconnection - Connection-Oriented Protocol forthe Association Control Service Element: ProtocolSpecification ***CD-ROM ONLY***

IEC 8650-1 Information Technology - Open SystemsInterconnection - Connection-Oriented Protocol forthe Association Control Service Element: ProtocolSpecification Second Edition; Amendment 1-1997

IEC DIS 8650-1 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Connection-Oriented Protocol forthe Association Control Service Element: ProtocolSpecification Amendment 1: Fast AssociateMechanism; (1996) ***CD-ROM ONLY***

IEC DIS 8650-1 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Connection-Oriented Protocol forthe Association Control Service Element: ProtocolSpecification Amendment 2: Incorporation ofExtensibility Markers 1996 ***CD-ROM ONLY***

IEC 8650-2 Information Technology - Open SystemsInterconnection - Protocol Specification for theAssociation Control Service Element: ProtocolImplementation Conformance Statement (PICS) Proforma Second Edition

IEC 8651-4 Information Technology - Computer Graphics - Graphical Kernel System (GKS) Language Bindings - Part 4: C Second Edition

IEC 8652 Information Technology - Programming Languages - Ada Second Edition

IEC TR 8802-1 Information Technology - Telecommunications andInformation Exchange between Systems - Local andMetropolitan Area Networks - Specific Requirements - Part 1: Overview of Local Area Network StandardsSecond Edition

IEC 8802-2 Information Technology - Telecommunications and


Information Exchange between Systems - Local andMetropolitan Area Networks - Specific Requirements - Part 2: Logical Link Control Third Edition; ANSI/IEEE 802.2

IEC 8802-2 DRAFT AMD 7 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 2: Logical Link ControlAmendment 7: Optional Toleration of Duplicate I-Format PDUs 1995 ***CD-ROM ONLY***

IEC 8802-2 DRFT AMD 6.2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 2: Logical Link ControlAmendment 6: Managed Objects Definition for LogicalLink Control (LLC) 1995 ***CD-ROM ONLY***

IEC 8802-3 Information Technology - Telecommunications andInformation Exchange Between Systems - Local andMetropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access withCollision Detection (CSMA/CD) Access Method andPhysical Layer Specifications Fifth Edition; ANSI/IEEE Std 802.3

IEC 8802-3 DRAFT AMD 21 (DRAFT) Infor.Technol. - Telecommunications andInfor.Exch. between Systems - Local andMetropolitan Area Networks - Specific Reqmts. - Part 3: Carrier Sense Multiple Access withCollision Detection (CSMA/CD) Access Method andPhysical Layer Specif. Amd. 21: Media AccessControl (MAC) Parameters, Physical Layer, MediumAttachment Units, and Repeater for 100 Mb/sOperation , Type 100Base-T (Clauses 21-30) 1997; ***CD ROM ONLY***

IEC 8802-4 Information Processing Systems - Local AreaNetworks - Part 4: Token-Passing Bus Access Methodand Physical Layer Specifications First Edition

IEC 8802-5 Information Technology - Telecommunications andInformation Exchange between Systems - Local andMetropolitan Area Networks - Specific Requirements - Part 5: Token Ring Access Method and PhysicalLayer Specifications Second Edition; ANSI/IEEE802.5; Replaces ISO/IEC TR 10738

IEC 8802-5 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 5: Token Ring Access Method andPhysical Layer Specifications Amendment 1: Dedicated Token Ring Operation 1997; ***CD_ROMONLY****

IEC 8802-5 DRAFT AMD 2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 5: Token Ring Access Method andPhysical Layer Specifications Amendment 2: FibreOptic Media 1997; ***CD-ROM ONLY***

IEC 8802-5 DRAFT AMD 3 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 5: Token Ring Access Method andPhysical Layer Specifications ***CD-ROM ONLY***

IEC DIS 8802-6 (DRAFT) Information Processing Systems - Local andMetropolitan Area Networks - Part 6: DistributedQueue Dual Bus (DQDB) Subnetwork of a MetropolitanArea Network (MAN) ***CD-ROM ONLY***

IEC 8802-6 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunications


and Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 6: Distributed Queue Dual Bus (DQDB) Access Method and Physical LayerSpecifications Amendment 1: Protocol ImplementationConformance Statement 1994 ***CD-ROM ONLY***

IEC 8802-6 DRAFT AMD 2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 6: Distributed Queue Dual Bus (DQDB) Access Method and Physical LayerSpecifications Amendment 2: Isochronous Service ona DQDB Subnetwork of a Metropolitan Area Network (MAN) 1995 ***CD-ROM ONLY***

IEC 8802-6 DRAFT AMD 3 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 6: Distributed Queue Dual Bus (DQDB) Access Method and Physical LayerSpecifications Amendment 3: Connection-OrientedService 1995 ***CD-ROM ONLY***

IEC 8802-9 Information Technology - Telecommunications andInformation Exchange between Systems - Local andMetropolitan Area Networks - Specific Requirements - Part 9: Integrated Services (IS) LAN Interface atthe Medium Access Control (MAC) and Physical (PHY) Layers First Edition; ANSI/IEEE Std. 802.9

IEC DIS 8802-11 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Localand Metropolitan Area Networks - SpecificRequirements - Part 11: Wireless LAN Medium AccessControl (MAC) and Physical Layer (PHY) Specifications ***CD-ROM ONLY***

IEC DIS 8802-12 (DRAFT) Information Technology - Local andMetropolitan Area Networks - Part 12: Demand-Priority Access Method, Physical Layer and RepeaterSpecifications ***CD-ROM ONLY***

IEC 8806-4 Information Technology - Computer Graphics - Graphical Kernel System for Three Dimensions (GKS-3D) Language Bindings - Part 4: C FirstEdition

IEC 8807 DRAFT AMD 1 (DRAFT) Information Processing Systems - OpenSystems Interconnection - LOTOS - a FormalDescription Technique Based on the TemporalOrdering of Observational Behaviour Amendment 1: G-LOTOS 1992; ***CD-ROM ONLY***

IEC 8822 Information Technology - Open SystemsInterconnection - Presentation Service DefinitionSecond Edition

IEC 8822 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Presentation Service DefinitionAmendment 2: Nested Connections Functional Unit ***CD-ROM ONLY***; 1998

IEC 8823-1 Information Technology - Open SystemsInterconnection - Connection-Oriented PresentationProtocol: Protocol Specification Second Edition

IEC 8823-1 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Connection-Oriented PresentationProtocol: Protocol Specification Amendment 2: Nested Connections Functional Unit ***CD-ROMONLY***; 1998

IEC 8823-2 Information Technology - Open SystemsInterconnection - Connection-Oriented PresentationProtocol: Protocol Implementation ConformanceStatement (PICS) Proforma Second Edition


IEC 8824-1 Information Technology - Abstract Syntax NotationOne (ASN.1): Specification of Basic Notation FirstEdition; Amendment 1-1996; Corrigendum 1-1996

IEC 8824-1 DRAFT AMD 3 (DRAFT) Information Technology - Open SystemsInterconnection - Abstract Syntax Notation One (ASN.1) - Part 1: Specification of Basic NotationAmendment 3: Rules for Extensibility; (1994) ***CD-ROM ONLY***

IEC 8824-2 Information Technology - Abstract Syntax NotationOne (ASN.1): Information Object Specification FirstEdition; Amendment 1-1996

IEC 8824-3 Information Technology - Abstract Syntax NotationOne (ASN.1): Constraint Specification First Edition

IEC 8824-4 Information Technology - Abstract Syntax NotationOne (ASN.1): Parameterization of ASN.1Specifications First Edition

IEC 8825 Information Technology - Open SystemsInterconnection - Specification of Basic EncodingRules for Abstract Syntax Notation One (ASN.1) Second Edition

IEC 8825-1 Information Technology - ASN.1 Encoding Rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and DistinguishedEncoding Rules (DER) First Edition; Corrigendum1-1996

IEC 8825-2 Information Technology - ASN.1 Encoding Rules: Specification of Packed Encoding Rules (PER) FirstEdition

IEC DIS 8825-3 (DRAFT) Information Technology - Open SystemsInterconnection - Specification of ASN.1 EncodingRules - Part 3: Distinguished Canonical EncodingRules ***CD-ROM ONLY***

IEC 8831 Information Technology - Open SystemsInterconnection - Job Transfer and ManipulationConcepts and Services Second Edition

IEC 8832 Information Technology - Open SystemsInterconnection - Specification of the Basic Classand Full Protocol for Job Transfer and ManipulationSecond Edition

IEC 8859-1 Information Technology - 8-Bit Single-Byte CodedGraphic Character Sets - Part 1: Latin AlphabetNo. 1 First Edition

IEC DIS 8859-2 (DRAFT) Information Technology - 8-Bit Single-ByteCoded Graphic Character Sets - Part 2: LatinAlphabet No. 2 ***CD-ROM ONLY***



IEC DIS 8859-5 (DRAFT) Information Technology - 8-Bit Single-ByteCoded Graphic Character Sets - Part 5: Latin/Cyrillic Alphabet ***CD-ROM ONLY***

IEC DIS 8859-6 (DRAFT) Information Technology - 8-Bit Single-ByteCoded Graphic Character Sets - Part 6: Latin/ArabicAlphabet ***CD-ROM ONLY***

IEC DIS 8859-8 (DRAFT) Information Technology - 8-Bit Single-ByteCoded Graphic Character Sets - Part 8: Latin/HebrewAlphabet ***CD-ROM ONLY***


IEC DIS 8859-10 (DRAFT) Information Technology - 8-Bit Single-Byte


Coded Graphic Character Sets - Part 10: LatinAlphabet No. 6 ***CD-ROM ONLY***

IEC DIS 8859-11 (DRAFT) Information Technology - 8-Bit Single-ByteCoded Graphic Character Sets - Part 11: Latin/ThaiCharacter Set ***CD-ROM ONLY***


IEC DIS 8859-14 (DRAFT) Information Technology - 8-Bit Single-ByteCoded Graphic Character Sets - Part 14: LatinAlphabet No. 8 (Celtic) ***CD-ROM ONLY***

IEC 8860-1 Information Processing - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using ModifiedFrequency Modulation Recording at 7 958 ftprad on80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic Charactistics First Edition; Corrigendum 1-1990

IEC 8860-2 Information Processing - Data Interchange on 90 mm (3.5 in) Flexible Disk Cartridges Using ModifiedFrequency Modulation Recording at 7 958 ftprad on80 Tracks on Each Side - Part 2: Track Format FirstEdition; Corrigendum 1-1990

IEC 8877 Information Technology - Telecommunications andInformation Exchange between Systems - InterfaceConnector and Contact Assignments for ISDN BasicAccess Interface Located at Reference Points S andT Second Edition; CEN EN 28877: 1993

IEC 8878 Information Technology - Telecommunications andInformation Exchange Between Systems - Use of X.25to Provide the OSI Connection-Mode Network ServiceSecond Edition; Corrigendum 1-1993; Corrigendum2-1993; Corrigendum 3-1996

IEC 8880-1 Information Technology - Telecommunications andInformation Exchange between Systems - ProtocolCombinations to Provide and Support the OSI NetworkService - Part 1: General Principles FirstEdition; AS/NZS 4107.1: 1993

IEC 8880-2 (WITHDRAWN) Information Technology - Telecommunications and Information Exchangebetween Systems - Protocol Combinations to Provideand Support the OSI Network Service - Part 2: Provision and Support of the Connection-ModeNetwork Service Second Edition; CAN/CSA-ISO/IEC8880-2-95

IEC 8880-2 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - ProtocolCombinations to Provide and Support the OSI NetworkService - Part 2: Provision and Support of theConnection-Mode Network Service Amendment 1: Addition of the ISDN Environment 1991 ***CD-ROMONLY***

IEC 8880-2 DRAFT AMD 2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - ProtocolCombinations to Provide and Support the OSI NetworkService - Part 2: Provision and Support of theConnection-Mode Network Service Amendment 2: Addition of PSTN & CSDN; Environments; 1991 ***CD-ROM ONLY***

IEC 8880-3 Information Technology - Telecommunications andInformation Exchange between Systems - ProtocolCombinations to Provide and Support the OSI NetworkService - Part 3: Provision and Support of theConnectionless-Mode Network Service First Edition; AS/NZS 4107.3: 1993

IEC 8881 Information Processing Systems - Data


Communications - Use of the X.25 Packet LevelProtocol in Local Area Networks First Edition; Corrigendum 1-1991

IEC 8882-1 Information Technology - Telecommunications andInformation Exchange between Systems - X.25 DTEConformance Testing - Part 1: General PrinciplesSecond Edition

IEC 8882-2 Information Technology - Telecommunications andInformation Exchange between Systems - X.25 DTEConformance Testing - Part 2: Data Link LayerConformance Test Suite Second Edition

IEC DIS 8882-2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - X.25 DTEConformance Testing - Part 2: Data Link LayerConformance Test Suite ***CD-ROM ONLY***

IEC 8882-3 Information Technology - Telecommunications andInformation Exchange between Systems - X.25 DTEConformance Testing - Part 3: Packet LayerConformance Test Suite Second Edition; Corrigendum1 04/01/1997

IEC DIS 8882-3 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - X.25 DTEConformance Testing - Part 3: Packet LayerConformance Test Suite ***CD-ROM ONLY***

IEC 8885 Information Technology - Telecommunications andInformation Exchange between Systems - High-LevelData Link Control (HDLC) Procedures - GeneralPurpose XID Frame Information Field Content & Format Third Edition; Amendment 9-1995; AS/NZS3624: 1994; CAN/CSA-ISO/IEC-8885-95

IEC 8885 DRAFT AMD 7 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - GeneralPurpose XID Frame Information Field Content andFormat Amendment 7: Frame Check Sequence (FCS) Negotiation Using the Parameter Negotiation DataLink Layer Subfield Subfield 1992 ***CD-ROM ONLY***

IEC 8885 DRAFT AMD 10 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - GeneralPurpose XID Frame Information Field Content andFormat Amendment 10: Unnumbered Information Framewith Header Check (UIH) Command and Response 1995 ***CD-ROM ONLY***

IEC 8885 DRAFT AMD 11 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High- Level Data Link Control (HDLC) Procedures - GeneralPurpose XID Frame Information Field Content andFormat Amendment 11: Span List Encoding of theInformation Field in the Multi-SREJ Frame 1995 ***CD-ROM ONLY***

IEC 8886 Information Technology - Open SystemsInterconnection - Data Link Service DefinitionSecond Edition

IEC 9040 Information Technology - Open SystemsInterconnection - Virtual Terminal Basic ClassService Second Edition; Incorporates Amendment2:1992, Technical Corrigendum 1: 1991, TechnicalCorrigendum 2: 1992 and Technical Corrigendum 3: 1993

IEC 9041-1 Information Technology - Open SystemsInterconnection - Virtual Terminal Basic ClassProtocol - Part 1: Specification Second Edition; Incorporates Amendment 2-1992; TechnicalCorrigendum 1-1992 and Technical Corrigendum 2-1993


IEC 9041-2 Information Technology - Open SystemsInterconnection - Virtual Terminal Basic ClassProtocol - Part 2: Protocol ImplementationConformance Statement (PICS) Proforma SecondEdition

IEC 9066-1 Information Processing Systems - TextCommunication - Reliable Transfer - Part 1: Modeland Service Definition First Edition

IEC 9066-2 Information Processing Systems - TextCommunication - Reliable Transfer - Part 2: Protocol Specification First Edition

IEC 9066-3 Information Technology - Open SystemsInterconnection - Reliable Transfer: ProtocolImplementation Conformance Statement (PICS) Proforma First Edition

IEC 9070 Information Technology - SGML Support Facilities - Registration Procedures for Public Text OwnerIdentifiers Second Edition; CEN EN 29070: 1992; AS/NZS 4097: 1993

IEC DIS 9072-1 (DRAFT) Information Technology - Remote Operations - Part 1: Concepts, Model and Notation; (CCITTRECMN X.9 ROSE) ***CD-ROM ONLY***

IEC 9072-1 Information Processing Systems - TextCommunication - Remote Operations - Part 1: Model, Notation and Service Definition First Edition; NZS/ISO/IEC 9072.1: 1989

IEC DIS 9072-2 (DRAFT) Information Technology - Remote Operations - Part 2: OSI Realisations - Remote OperationsService Element (ROSE) Service Definition; (CCITTRECMN X.219) ***CD-ROM ONLY***

IEC 9072-2 Information Processing Systems - TextCommunication - Remote Operations - Part 2: Protocol Specification First Edition; NZS/ISO/IEC9072.2: 1989

IEC 9072-3 Information Technology - Open SystemsInterconnection - Remote Operations: ProtocolImplementation Conformance Statement (PICS) Proforma First Edition

IEC 9074 Information Technology - Open SystemsInterconnection - Estelle: A Formal DescriptionTechnique Based on an Extended State TransitionModel Second Edition

IEC 9074 AMD 1 (WITHDRAWN) Information Processing Systems - OpenSystems Interconnection - Estelle: A FormalDescription Technique Based on an Extended StateTransition Model Amendment 1: Tutorial on Estelle; (1993)

IEC 9075 Information Technology - Database Languages - SQLThird Edition; Corrigendum 1-1996

IEC 9075-3 Information Technology - Database Languages - SQL - Part 3: Call-Level Interface (SQL/CLI) FirstEdition

IEC 9075-4 Information Technology - Database Languages - SQL - Part 4: Persistent Stored Modules (SQL/PSM) FirstEdition

IEC 9126 Information Technology - Software ProductEvaluation - Quality Characteristics and Guidelinesfor Their Use First Edition; AS/NZS 4216: 1994

IEC 9171-1 Information Technology - 130 mm Optical DiskCartridge, Write Once, for Information Interchange - Part 1: Unrecorded Optical Disk Cartridge FirstEdition; CEN EN 29171-1: 1993

IEC 9171-2 Information Technology - 130 mm Optical DiskCartridge, Write Once, for Information Interchange


- Part 2: Recording Format First Edition; CEN EN29171-2: 1993

IEC 9281-1 Information Technology - Picture Coding Methods - Part 1: Identification First Edition (NZS/ISO/IEC9281.1: 1990)

IEC 9281-2 Information Technology - Picture Coding Methods - Part 2: Procedure for Registration First Edition

IEC 9282-2 Information Processing - Coded Representation ofPictures - Part 2: Incremental Encoding of PointLists in a 7-Bit or 8-Bit Environment First Edition

IEC 9293 Information Technology - Volume and File Structureof Disk Cartridges for Information InterchangeSecond Edition

IEC TR 9294 Information Technology - Guidelines for theManagement of Software Documentation First Edition

IEC 9314-3 Information Processing Systems - Fibre DistributedData Interface (FDDI) - Part 3: Physical LayerMedium Dependent (PMD) First Edition; NZS/ISO/IEC9314.3: 1990; CEN EN ISO/IEC 9314-3: 1995

IEC DIS 9314-4 (DRAFT) Information Technology - Fibre DistributedData Interface (FDDI) - Part 4: Single Mode FibrePhysical Layer Medium Dependent (SMF-PMD) ***CD-ROMONLY***

IEC 9314-5 Information Technology - Fibre Distributed DataInterface (FDDI) - Part 5: Hybrid Ring Control (HRC) First Edition

IEC DIS 9314-6 (DRAFT) Information Technology - Fibre DistributedData Interface (FDDI) - Part 6: Station Management (SMT) ***CD-ROM ONLY***

IEC DIS 9314-7 (DRAFT) Information Technology - Fibre DistributedData Interface (FDDI) - Part 7: Physical LayerProtocol (PHY-2) ***CD-ROM ONLY***

IEC DIS 9314-8 (DRAFT) Information Technology - Fibre DistributedData Interface (FDDI)- Part 8: Token Ring MediaAccess Control-2 (MAC-2) ***CD-ROM ONLY***

IEC DIS 9314-13 (DRAFT) Information Technology - Fibre DistributedData Interface (FDDI) - Part 13: Conformance TestProtocol Implementation Conformance StatementProforma (CT-PICS) ***CD-ROM ONLY***

IEC DIS 9314-25 (DRAFT) Information Technology - Fibre DistributedData Interface (FDDI) - Part 25: Abstract TestSuite for FDDI - Station Management ConformanceTesting (FDDI-SMT-ATS) ***CD-ROM ONLY***

IEC 9316 Information Technology - Small Computer SystemInterface-2 Second Edition

IEC DIS 9316-1 (DRAFT) Information Technology - Small ComputerSystem Interface - 2 ***CD-ROM ONLY***

IEC 9318-2 Information Technology - Intelligent PeripheralInterface Part 2: Device Specific Command Set forMagnetic Disk Drives First Edition

IEC 9318-3 Information Technology - Intelligent PeripheralInterface Part 3: Device Generic Command Set forMagnetic and Optical Disk Drives First Edition

IEC 9318-4 Information Technology - Intelligent PeripheralInterface Part 4: Device Generic Command Set forMagnetic Tape Drives First Edition; CEN EN29318-4: 1993

IEC DIS 9496 (DRAFT) CCITT High Level Language (CHILL) ***CD-ROMONLY***

IEC 9506-1 Industrial Automation Systems - ManufacturingMessage Specification - Part 1: Service DefinitionFirst Edition; Amendment 1-1993; Amendment 2-1995; Corrigendum 1-1995

IEC 9506-2 Industrial Automation Systems - Manufacturing


Message Specification - Part 2: ProtocolSpecification First Edition; Amendment 1-1993; Amendment 2-1995; Corrigendum 1-1995; Corrigendum2-1995

IEC 9506-3 Industrial Automation Systems - ManufacturingMessage Specification - Part 3: Companion Standardfor Robotics First Edition; Corrigendum 1-1993; Amendment 2-1997

IEC 9506-3 DRAFT AMD 1 (DRAFT) Industrial Automation Systems - Manufacturing Message Specification - Part 3: Companion Standard for Robotics 1994 ***CD ROMONLY***

IEC 9506-4 Industrial Automation Systems - ManufacturingMessage Specification - Part 4: Companion Standardfor Numerical Control First Edition

IEC 9506-4 DRAFT AMD 1 (DRAFT) Industrial Automation Systems - Manufacturing Message Specification - Part 4: Companion Standard for Numerical Control 1994 ***CDROM ONLY***

IEC 9506-6 Industrial Automation Systems - ManufacturingMessage Specification - Part 6: Companion Standardfor Process Control First Edition

IEC 9529-1 Information Processing Systems - Data Interchangeon 90 mm (3,5 in) Flexible Disk Cartridges UsingModified Frequency Modulation Recording at 15 916ftprad, on 80 Tracks on Each Side - Part 1: Dimensional, Physical and Magnetic CharacteristicsF First Edition

IEC 9529-2 Information Processing Systems - Data Interchangeon 90 mm (3,5 in) Flexible Disk Cartridges UsingModified Frequency Modulation Recording at 15 916ftprad, on 80 Tracks on Each Side - Part 2: TrackFormat First Edition

IEC 9541-1 Information Technology - Font InformationInterchange - Part 1: Architecture First Edition; Corrigendum 1-1992; Corrigendum 2-1994; Corrigendum3-1995

IEC 9541-1 DRAFT AMD 1 (DRAFT) Information Technology - Font InformationInterchange - Part 1: Architecture Amendment 1: Typeface Design Grouping 1996 ***CD-ROM ONLY***

IEC 9541-1 DRAFT AMD 2 (DRAFT) Information Technology - Font InformationInterchange - Part 1: Architecture; Amendment 2: Minor Enhancements to the Architecture to AddressFont Technology Advances 1997 ***CD-ROM ONLY***

IEC 9541-2 Information Technology - Font InformationInterchange - Part 2: Interchange Format FirstEdition; Corrigendum 1-1993; Corrigendum 2-1995

IEC 9541-3 Information Technology - Font InformationInterchange - Part 3: Glyph Shape RepresentationFirst Edition

IEC DIS 9542 (DRAFT) Information Technology - End System toIntermediate System Routeing Information ExchangeProtocol for Use in Conjunction with the Protocolfor Providing the Connectionless-Mode NetworkService (ISO/IEC 8473) ***CD-ROM ONLY***

IEC 9542 DRAFT AMD 1 (DRAFT) Information Processing Systems - Telecommunications and Information Exchangebetween Systems - End System to Intermediate SystemRouteing Exchange Protocol for Use in Conjunctionwith the Protocol for Providing the Connectionless-Mode Network Service (ISO 8473) Amendment 1: Dynamic Discovery of OSI NSAP Addresses by EndSystems 1992 ***CD-ROM ONLY***

IEC 9542 DRAFT AMD 2 (DRAFT) Information Processing Systems - Telecommunications and Information Exchange


between Systems - End System to Intermediate SystemRouteing Exchange Protocol for Use in Conjunctionwith the Protocol for Providing the Connectionless-Mode Network Service (ISO 8473) Amendment 2: Addition of Connectionless-Mode MulticastCapability ***CD-ROM ONLY***

IEC 9542 DRAFT AMD 2.2 (DRAFT) Information Processing Systems - Telecommunications and Information Exchangebetween Systems - End System to Intermediate SystemRouteing Exchange Protocol for Use in Conjunctionwith the Protocol for Providing the Connectionless-Mode Network Service (ISO 8473) Amendment 2: Addition of Connectionless-Mode MulticastCapability 1994 ***CD-ROM ONLY***

IEC 9545 Information Technology - Open SystemsInterconnection - Application Layer StructureSecond Edition

IEC 9545 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Application Layer StructureAmendment 1: Extended Application Layer Structure1991;***CD-ROM ONLY***

IEC 9545 DRAFT AMD 1.2 (DRAFT) Information Technology - Open SystemsInterconnection - Application Layer StructureAmendment 1: Extended Application Layer Structure1992;***CD-ROM ONLY***

IEC 9548-1 Information Technology - Open SystemsInterconnection - Connectionless Session Protocol: Protocol Specification First Edition

IEC 9548-2 Information Technology - Open SystemsInterconnection - Connectionless Session Protocol: Protocol Implementation Conformance Statement (PICS) Proforma First Edition

IEC 9549 Information Technology - Galvanic Isolation ofBalanced Interchange Circuits First Edition; AS/NZS4162: 1994

IEC TR 9571 Information Technology - Open SystemsInterconnection - LOTOS Description of the SessionService First Edition (AS/NZS 4207: 1994)

IEC TR 9572 Information Technology - Open SystemsInterconnection - LOTOS Description of the SessionProtocol First Edition (AS/NZS 4206: 1994)

IEC TR 9573 Information Processing - SGML Support Facilities - Techniques for Using SGML First Edition

IEC TR 9573-11 Information Processing - SGML Support Facilities - Techniques for Using SGML - Part 11: Applicationat ISO Central Secretariat for InternationalStandards and Technical Reports First Edition; AS/NZS 3967.11: 1994

IEC TR 9573-13 Information Technology - SGML Support Facilities - Techniques for Using SGML - Part 13: PublicEntity Sets for Mathematics and Science FirstEdition; (Replaces ISO 8879 Annex D (in part)) (AS/NZS 3967.13: 1994)

IEC 9574 Information Technology - Provision of the OSIConnection-Mode Network Service by Packet ModeTerminal Equipment to an Integrated ServicesDigital Network (ISDN) Second Edition; AS/NZS4099: 1994

IEC TR 9575 Information Technology - Telecommunications andInformation Exchange between Systems - OSI RouteingFramework Second Edition; NZS/ISO/IEC TR 9575: 1990

IEC 9576-1 Information Technology - Open SystemsInterconnection - Connectionless PresentationProtocol: Protocol Specification Second Edition; Replaces ISO/IEC 9576: 1991


IEC 9576-2 Information Technology - Open SystemsInterconnection - Connectionless PresentationProtocol: Protocol Implementation ConformanceStatement (PICS) Proforma First Edition

IEC TR 9577 Information Technology - Protocol Identification inthe Network Layer Third Edition

IEC TR 9578 Information Technology - Communication InterfaceConnectors Used in Local Area Networks FirstEdition

IEC 9579-1 Information Technology - Open SystemsInterconnection - Remote Database Access - Part 1: Generic Model, Service and Protocol First Edition; FIPS PUB 193-1995; Corrigendum 1-1995; CAN/CSA-ISO/IEC 9579-1-95; AS/NZS 4379.1: 1996; Corrigendum 1Corrected and Reprinted - 1996

IEC 9579-2 Information Technology - Open SystemsInterconnection - Remote Database Access - Part 2: SQL Specialization Second Edition

IEC 9579-2 DRAFT AMD 1 (WITHDRAWN) (DRAFT) Information Technology - OpenSystems Interconnection - Remote Database Access - Part 2: SQL Specialization Amendment 1 1996 ***CD-ROM ONLY***

IEC 9579-3 Information Technology - Open SystemsInterconnection - Remote Database Access - Part 3: SQL Specialization Protocol ImplementationConformance Statement (PICS) Proforma First Edition

IEC 9592-1 Information Technology - Computer Graphics andImage Processing - Programmer's HierarchicalInteractive Graphics System (PHIGS) - Part 1: Functional Description Second Edition

IEC 9592-1 DRAFT AMD 2 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics System (PHIGS) - Part 1: FunctionalDescription Amendment 2: to Incorporate DirectInterpretation 1994;***CD-ROM ONLY***

IEC 9592-1 DRAFT AMD 3 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics System (PHIGS) - Part 1: FunctionalDescription Amendment 3: Enhanced Control; 1995;***CD-ROM ONLY***

IEC 9592-1 DRAFT AMD 4 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics System (PHIGS) - Part 1: FunctionalDescription Amendment 4: to Incorporate EnchancedInput 1994;***CD-ROM ONLY***

IEC 9592-1 DRAFT AMD 6 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics System (PHIGS) - Part 1: FunctionalDescription Amendment 6: Registered Items 1996;***CD-ROM ONLY***

IEC 9592-2 Information Technology - Computer Graphics andImage Processing - Programmer's HierarchicalInteractive Graphics System (PHIGS) - Part 2: Archive File Format Second Edition

IEC 9592-2 DRAFT AMD 2 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics System (PHIGS) - Part 2: Archive FileFormat Amendment 2 1995 ***CD-ROM ONLY***

IEC 9592-3 Information Technology - Computer Graphics andImage Processing - Programmer's HierarchicalInteractive Graphics System (PHIGS) - Part 3: Specification for Clear-Text Encoding of ArchiveFile Second Edition

IEC 9592-3 DRAFT AMD 2 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical Interactive


Graphics Systems (PHIGS) - Part 3: Clear-TextEncoding of Archive File Amendment 2 1995;***CD-ROMONLY***

IEC 9592-3 DRAFT AMD 4 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics Systems (PHIGS) - Part 3: Clear-TextEncoding of Archive File Amendment 4-1996; ***CD-ROM ONLY***

IEC 9592-4 Information Processing Systems - Computer Graphics - Programmer's Hierarchical Interactive GraphicsSystem (PHIGS) - Part 4: Plus Lumiere andSurfaces, PHIGS PLUS First Edition; Corrigendum1-1994

IEC 9592-4 DRAFT AMD 1 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics System (PHIGS) - Part 4: Plus Lumiere undSurfaces, PHIGS PLUS Amendment 1: to IncorporateDirect Interpretation 1994;***CD-ROM ONLY***

IEC 9592-4 DRAFT AMD 2 (DRAFT) Information Processing Systems - ComputerGraphics - Programmer's Hierarchical InteractiveGraphics System (PHIGS) - Part 4: Plus Lumiere undSurfaces, PHIGS PLUS Amendment 2: Enhanced Control1995 ***CD-ROM ONLY***

IEC 9593-1 Information Processing Systems - Computer Graphics - Programmer's Hierarchical Interactive GraphicsSystem (PHIGS) Language Bindings - Part 1: FORTRANFirst Edition; Corrigendum 1-1993; Corrigendum2-1994; Amendment 1- 1995; NZS/ISO/IEC 9593.1: 1990

IEC 9593-3 Information Technology - Computer Graphics - Programmer's Hierarchical Interactive GraphicsSystem (PHIGS) Language Bindings - Part 3: AdaFirst Edition; Amendment 1-1994; Corrigendum1-1993; Corrigendum 2-1994

IEC 9593-4 Information Technology - Computer Graphics - Programmer's Hierarchical Interactive GraphicsSystem (PHIGS) Language Bindings - Part 4: C FirstEdition; Amendment 1-1994; ANSI/ISO 9593.4-1991; Corrigendum 1-1994

IEC 9593-4 DRAFT AMD 2 (DRAFT) Information Technology - Computer Graphics - Programmers's Hierarchical Interactive GraphicsSystem (PHIGS) Language Bindings - Part 4: CAmendment 2: Incorporation of PHIGS Amendments1996 ***CD-ROM ONLY***

IEC 9594-1 Information Technology - Open SystemsInterconnection - The Directory: Overview ofConcepts, Models and Services Second Edition; AS/NZS 4019.1:1996

IEC 9594-1 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 1: Overviewof Concepts, Models and Services Amendment 1: Contexts 1995;***CD-ROM ONLY***

IEC 9594-2 Information Technology - Open SystemsInterconnection - The Directory: Models SecondEdition

IEC 9594-2 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 2: ModelsAmendment 1: Access Control 1992 ***CD-ROM ONLY***

IEC 9594-2 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 2: ModelsAmendment 2: Contexts 1995;***CD-ROM ONLY***

IEC 9594-2 DRAFT AMD 3 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 2: ModelsAmendment 3: Minor Extensions to Support UserRequirements 1995;***CD-ROM ONLY***

IEC 9594-2 DRAFT AMD 4 (DRAFT) Information Technology - Open Systems


Interconnection - The Directory - Part 2: ModelsAmendment 4: Certificate Extensions 1995;***CD-ROMONLY***

IEC 9594-3 Information Technology - Open SystemsInterconnection - The Directory: Abstract ServiceDefinition Second Edition

IEC 9594-3 Information Technology - Open SystemsInterconnection - The Directory: Part 3: AbstractService Definition First Edition; Corrigendum1-1991; Corrigendum 2-1992; Corrigendum 3-1992; Corrigendum 4-1993

IEC 9594-3 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 3: AbstractService Definition Amendment 1: Use of SystemsManagement for Administration of the Directory1995;***CD-ROM ONLY***

IEC 9594-3 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 3: AbstractService Definition Amendment 2: Contexts 1995;***CD-ROM ONLY***

IEC 9594-3 DRAFT AMD 3 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 3: AbstractService Definition Amendment 3: Minor Extensions toSupport User Requirements 1995;***CD-ROM ONLY***

IEC 9594-4 Information Technology - Open SystemsInterconnection - The Directory: Procedures forDistributed Operation Second Edition

IEC 9594-4 Information Technology - Open SystemsInterconnection - The Directory: Part 4: Proceduresof Distributed Operation First Edition; Corrigendum1-1991; Corrigendum 2-1992; Corrigendum 3-1993

IEC 9594-4 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 4: Procedures for Distributed Operation Amendment 1: Use of System Management for Administration of theDirectory 1995 ***CD-ROM ONLY***

IEC 9594-4 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 4: Procedures for Distributed Operation Amendment 2: Minor Extensions to Support User Requirements1995;***CD-ROM ONLY***

IEC 9594-5 Information Technology - Open SystemsInterconnection - The Directory: ProtocolSpecifications Second Edition

IEC 9594-5 Information Technology - Open SystemsInterconnection - The Directory - Part 5: ProtocolSpecifications First Edition; Corrigendum 1-1992

IEC 9594-5 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 5: ProtocolSpecifications Amendment 1: Contexts 1995;***CD-ROMONLY***

IEC 9594-6 Information Technology - Open SystemsInterconnection - The Directory: Selected AttributeTypes Second Edition

IEC 9594-6 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 6: SelectedAttribute Types Amendment 1: Contexts 1995;***CD-ROM ONLY***

IEC 9594-6 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 6: SelectedAttribute Types Amendment 2: Certificate Extensions1995 ***CD-ROM ONLY***

IEC 9594-7 Information Technology - Open SystemsInterconnection - The Directory: Selected ObjectClasses Second Edition; AS/NZS 4019.7: 1996


IEC 9594-7 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 7: SelectedObject Classes Amendment 1: Certificate Extensions1995 ***CD-ROM ONLY***

IEC 9594-7 DRAFT AMD 3 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory: Selected ObjectClasses Amendment 3: Contexts 1996 ***CD-ROMONLY***

IEC 9594-8 Information Technology - Open SystemsInterconnection - the Directory: AuthenticationFramework Second Edition ;AS/NZS 4019.8:1996

IEC 9594-8 Information Technology - Open SystemsInterconnection - The Directory: Part 8: Authentication Framework First Edition; Corrigendum1-1991

IEC 9594-8 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 8: Authentication Framework Amendment 1: CertificateExtensions 1995 ***CD-ROM ONLY***

IEC 9594-9 Information Technology - Open SystemsInterconnection - The Directory: Replication FirstEdition; AS/NZS 4019.9: 1996

IEC 9594-9 DRAFT AMD 1 (DRAFT) Information Technology - Open Systems - Interconnection - The Directory - Part 9: Replication Amendment 1: Contexts 1995 ***CD-ROMONLY***

IEC DIS 9594-10 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 10: Use ofSystems Management for Administration of theDirectory ***CD-ROM ONLY***

IEC DIS 9594-11 (DRAFT) Information Technology - Open SystemsInterconnection - the Directory - Part 11: Directory System Protocol - Protocol ImplementationConformance Statement (PICS) ***CD-ROM ONLY***

IEC DIS 9594 DRAFT AMD (DRAFT) Information Technology - Open SystemsInterconnection - The Directory Includes Draft Amd1 thru 5; 1996 ***CD-ROM ONLY***

IEC 9594 DRAFT AMD 2.2 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory: Amendment 2: Contexts 1996 ***CD-ROM ONLY***

IEC 9595 Information Technology - Open SystemsInterconnection - Common Management InformationService Definition Second Edition; Corrigendum1-2: 1992; Amendment 4-1992; Corrigendum 3-1994; Corrigendum 4-1995; NZS/ISO/IEC 9595: 1991

IEC 9596-1 Information Technology - Open SystemsInterconnection - Common Management InformationProtocol - Part 1: Specification Second Edition; Corrigendum 1-3: 1992; Corrigendum 4- 1993

IEC 9596-2 Information Technology - Open SystemsInterconnection - Common Management InformationProtocol: Protocol Implementation ConformanceStatement (PICS) Proforma First Edition; CCITTRECMN X.712; Corrigendum 1-1993; AS/NZS 3964.2: 1994; Corrigendum 2-1996

IEC 9636-1 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Functional Specification - Part 1: Overview, Profiles, and Conformance FirstEdition

IEC 9636-2 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Functional Specification - Part 2: Control First Edition

IEC 9636-3 Information Technology - Computer Graphics


- Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Functional Specification - Part 3: Output First Edition

IEC 9636-4 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Functional Specification - Part 4: Segments First Edition

IEC 9636-5 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Functional Specification - Part 5: Input and Echoing First Edition

IEC 9636-6 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Functional Specification - Part 6: Raster First Edition

IEC 9637-1 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Data Stream Binding - Part 1: Character Encoding First Edition

IEC 9637-2 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Data Stream Binding - Part 2: Binary Encoding First Edition

IEC 9638-3 Information Technology - Computer Graphics - Interfacing Techniques for Dialogues withGraphical Devices (CGI) - Language Bindings - Part3: Ada First Edition

IEC 9646-1 Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 1: General Concepts SecondEdition; CEN EN 29646-1: 1992; CAN/CSA-ISO/IEC9646-1-95 CEN EN ISO/IEC 9646-1: 1996

IEC 9646-1 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 1: General Concepts Amendment1 Protocol Profile Testing Methodology 1992 ***CD-ROM ONLY***

IEC 9646-1 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 1: General Concepts Amendment2: Multi-Party Testing Methodology 1992 ***CD-ROMONLY***

IEC 9646-2 Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 2: Abstract Test SuiteSpecification Second Edition; CAN/CSA-ISO/IEC-9646-2-95; CEN EN ISO/IEC 9646-2: 1996

IEC 9646-2 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 2: Abstract Test SuiteSpecification Amendment 1: Protocol Profile TestingMethodology 1992 ***CD-ROM ONLY***

IEC 9646-2 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 2: Abstract Test SuiteSpecification Amendment 2: Multi-Party TestingMethodology 1992 ***CD-ROM ONLY***

IEC 9646-3 Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 3: the Tree and TabularCombined Notation (TTCN) First Edition; CEN EN29646-3: 1994; AS/NZS 4103.3: 1994

IEC 9646-3 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 3: The Tree and Tabular


Combined Notation (TTCN) Amendment 1: TTCNExtensions 1993 ***CD-ROM ONLY***

IEC 9646-3 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework Part 3: the Tree and Tabular CombinedNotation (TTCN) Amendment 2: Further Extensions ***CD-ROM ONLY***

IEC 9646-4 Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 4: Test Realization SecondEdition; CAN/CSA-ISO/IEC 9646-4-95; CEN EN ISO/IEC9646-4: 1996

IEC 9646-4 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 4: Test Realization Amendment1: Protocol Profile Testing Methodology 1992 ***CD-ROM ONLY***

IEC 9646-4 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 4: Test Realization Amendment2: Multi-Party Testing Methodology 1992 ***CD-ROMONLY***

IEC 9646-5 Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 5: Requirements on TestLaboratories and Clients for the ConformanceAssessment Process Second Edition; CAN/CSA-ISO/IEC9646-5-95; CEN EN ISO/IEC 9646-5: 1996

IEC 9646-5 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 5: Requirements on TestLaboratories and Clients for the ConformanceAssessment Process Amendment 1: Protocol ProfileTesting Methodology 1992 ***CD-ROM ONLY***

IEC 9646-5 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 5: Requirements on TestLaboratories and Clients for the ConformanceAssessment Process Amendment 2: Multi-Party TestingMethodology 1992 ***CD-ROM ONLY***

IEC 9646-6 Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 6: Protocol Profile TestSpecification First Edition; CEN EN ISO/IEC9646-6: 1996

IEC 9646-7 Information Technology - Open SystemsInterconnection - Conformance Testing Methodologyand Framework - Part 7: Implementation ConformanceStatements First Edition; Corrigendum 1 04/01/1997

IEC 9661 Information Technology - Data Interchange on 12,7mm Wide Magnetic Tape Cartridges - 18 Tracks, 1 491Data Bytes per Millimetre Second Edition

IEC TR 9789 Information Technology - Guidelines for theOrganization and Representation of Data Elementsfor Data Interchange - Coding Methods andPrinciples First Edition

IEC 9796 Information Technology - Security Techniques - Digital Signature Scheme Giving Message RecoveryFirst Edition; CAN/CSA-ISO/IEC 9796-94

IEC 9796-2 Information Technology - Security Techniques - Digital Signature Schemes Giving MessageRecovery - Part 2: Mechanisms Using a Hash-FunctionFirst Edition

IEC 9797 Information Technology - Security Techniques - DataIntegrity Mechanism Using a Cryptographic Check


Function Employing a Block Cipher Algorithm SecondEdition (CAN/CSA-ISO/IEC-9797- 94)

IEC DIS 9798-1 (DRAFT) Information Technology - SecurityTechniques - Entity Authentication - Part 1: General Model ***CD-ROM ONLY***

IEC 9798-1 Information Technology - Security Techniques - Entity Authentication - Part 1: General SecondEdition

IEC 9798-2 Information Technology - Security Techniques - Entity Authentication - Part 2: Mechanisms UsingSymmetric Encipherment Algorithms First Edition; CAN/CSA-ISO/IEC 9798-2-95

IEC 9798-3 Information Technology - Security Techniques - Entity Authentication Mechanisms - Part 3: EntityAuthentication Using a Public Key Algorithm FirstEdition; CAN/CSA-ISO/IEC 9798-3-94

IEC DIS 9798-3 (DRAFT) Information Technology - SecurityTechniques - Entity Authentication - Part 3: Mechanisms Using Asymmetric Signature Techniques ***CD-ROM ONLY***

IEC 9798-4 Information Technology - Security Techniques - Entity Authentication - Part 4: Mechanisms Usinga Cryptographic Check Function First Edition

IEC DIS 9798-5 (DRAFT) Information Technology - SecurityTechniques - Entity Authentication - Part 5: Mechanisms Using Zero Knowledge Techniques ***CD-ROM ONLY***

IEC 9804 Information Technology - Open SystemsInterconnection - Service Definition for theCommitment, Concurrency and Recovery ServiceElement Second Edition

IEC DIS 9804 (DRAFT) Information Technology - Open SystemsInterconnection - Service Definition for theCommitment, Concurrency and Recovery ServiceElement ***CD-ROM ONLY***

IEC 9805-1 Information Technology - Open SystemsInterconnection - Protocol for the Commitment, Concurrency and Recovery Service Element: ProtocolSpecification Second Edition

IEC DIS 9805-1 (DRAFT) Information Technology - Open SystemsInterconnection - Protocol for the Commitment, Concurrency and Recovery Service Element: ProtocolSpecification ***CD-ROM ONLY***

IEC 9805-2 Information Technology - Open SystemsInterconnection - Protocol for the Commitment, Concurrency and Recovery Service Element: ProtocolImplementation Conformance Statement (PICS) Proforma First Edition

IEC 9834-1 Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities: General ProceduresFirst Edition; Amendment 1 05-01-1997

IEC 9834-2 Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities: - Part 2: Registration Procedures for OSI Document TypesFirst Edition; AS/NZS 4153.2: 1994

IEC 9834-3 Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities - Part 3: Registrationof Object Identifier Component Values for JointISO-CCITT Use First Edition; AS/NZS 4153.3: 1993

IEC DIS 9834-3 (DRAFT) Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities - Part 3: Registration


of Values of RH-Name-Tree Components for JointITU-T Use ***CD-ROM ONLY***

IEC 9834-4 Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities - Part 4: Register ofVTE Profiles First Edition

IEC 9834-5 Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities - Part 5: Register ofVT Control Object Definitions First Edition (AS/NZS4153.5: 1993)

IEC 9834-6 Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities: Application Processesand Application Entities First Edition (AS/NZS4153.6: 1994)

IEC DIS 9834-7 (DRAFT) Information Technology - Open SystemsInterconnection - Procedures for the Operation ofOSI Registration Authorities: Assignment ofInternational Names for Use in Specific Contexts ***CD-ROM ONLY***

IEC 9894-2 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory - Part 2: ModelsAmendment 1: Use of Systems Management forAdministration of the Directory ***CD-ROM ONLY***

IEC 9899 Programming Languages - C First Edition; (CEN EN29899:1993) (Corrigendum 1-1994) (Amendment1-1995) (NZS/ISO/IEC 9899: 1990) (CAN/CSA-ISO/IEC-9899- 94) (Corrigendum 2-1996)

IEC 9899 DRAFT AMD 3 (DRAFT) Programming Languages - C Amendment 1: CIntegrity; (1994) ***CD-ROM ONLY***

IEC 9945-1 Information Technology - Portable Operating SystemInterface (POSIX) - Part 1: System ApplicationProgram Interface (API) (C Language) SecondEdition; (IEEE 1003.1)

IEC 9945-1 DRAFT AMD 4 (DRAFT) Information Technology - Portable OperatingSystem Interface (POSIX) - Part 1: SystemApplication Program Interface (API) [C Language] Amendment 4: Protocol Independent Interfaces (PII) 1997; ***CD-ROM ONLY***

IEC 9945-2 DRAFT AMD 1 (DRAFT) Information Technology - Portable OperatingSystem Interface (POSIX) - Part 2: Shell andUtilities Amendment 1: User Portability Extension; (1996) ***CD-ROM ONLY***

IEC 9945-2 VOLUME 1 Information Technology - Portable Operating SystemInterface (POSIX) Part 2: Shell and UtilitiesVolume 1 First Edition (ANSI/IEEE Std 1003.2) (CENEN ISO/IEC9945-2: 1995)

IEC 9945-2 VOLUME 2 Information Technology - Portable Operating SystemInterface (POSIX) Part 2: Shell and UtilitiesVolume 2 First Edition (ANSI/IEEE Std 1003.2)

IEC 9973 Information Technology - Computer Graphics andImage Processing - Procedures for Registration ofGraphical Items First Edition; (Replaces ISO/TR9973)

IEC DIS 9979 (DRAFT) Information Technology - SecurityTechniques - Procedures for the Registration ofCryptographic Algorithms ***CD-ROM ONLY***

IEC 9979 Data Cryptographic Techniques - Procedures for theRegistration of Cryptographic Algorithms FirstEdition (CAN/CSA-ISO/IEC-9979- 94)

IEC 9983 Information Technology - Designation of UnrecordedFlexible Disk Cartridges Second Edition

IEC 9995-1 Information Technology - Keyboard Layouts for Text


and Office Systems - Part 1: General PrinciplesGoverning Keyboard Layouts First Edition; (ReplacesISO 3243, 4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS 4395.1:1996)

IEC 9995-2 Information Technology - Keyboard Layouts for Textand Office Systems - Part 2: Alphanumeric SectionFirst Edition (Replaces ISO 3243, 4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS9995-2:1994)

IEC 9995-3 Information Technology - Keyboard Layouts for Textand Office Systems - Part 3: Complementary Layoutsof the Alphanumeric Zone of the AlphanumericSection First Edition; (Replaces ISO 3243, 4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS4395.3: 1996)

IEC 9995-4 Information Technology - Keyboard Layouts for Textand Office Systems - Part 4: Numeric Section FirstEdition (Replaces ISO 3243, 4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS 4395.4:1996)

IEC 9995-5 Information Technology - Keyboard Layouts for Textand Office Systems - Part 5: Editing Section FirstEdition (Replaces ISO 3243, 4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS 4395.5:1996)

IEC 9995-6 Information Technology - Keyboard Layouts for Textand Office Systems - Part 6: Function Section FirstEdition (Replaces ISO 3243, 4169, 1091, 1092, 1093, 2126, 2530, 3244, 8884) (AS/NZS 4395.6:1996)

IEC 9995-7 Information Technology - Keyboard Layouts for Textand Office Systems - Part 7: Symbols Used toRepresent Functions First Edition; Replaces ISO1093; AN/NZS 4395.7:1996; Amendment 1-1996

IEC 9995-8 Information Technology - Keyboard Layouts for Textand Office Systems - Part 8: Allocation of Lettersto the Keys of a Numeric Keypad First Edition (AS/NZS 4395.8:1996)

IEC TR 10000-1 Information Technology - Framework and Taxonomy ofInternational Standardized Profiles - Part 1: General Principles and Documentation FrameworkThird Edition; Corrected and Reprinted 03/01/1997

IEC TR 10000-2 Information Technology - Framework and Taxonomy ofInternational Standardized Profiles - Part 2: Principles and Taxonomy for OSI Profiles FourthEdition

IEC TR 10000-3 Information Technology - Framework and Taxonomy ofInternational Standardized Profiles - Part 3: Principles and Taxonomy for Open System EnvironmentProfiles First Edition

IEC 10021-1 Information Technology - Text Communication - Message-Oriented Text Interchange Systems (MOTIS) - Part 1: System and Service Overview FirstEdition (CORR 1-2: 1991) (CORR 3-5:1992) (CORR6-1994) (CORR 7- 1994) (AMD 1-1994) (CAN/CSA-ISO/IEC-10021-1 -94)

IEC DIS 10021-1 (DRAFT) Information Technology - Message HandlingSystems (MHS) - Part 1: System and ServiceOverview ***CD-ROM ONLY***

IEC 10021-1 DRAFT AMD 1 (DRAFT) Information Technology - Message HandlingSystems (MHS): System and Service Overview; Amendment 1: International Registration Authority1997; ***CD-ROM ONLY***

IEC 10021-1 DRAFT AMD 2 (DRAFT) Information Technology - Message HandlingSystems (MHS): System and Service Overview; Amendment 2: Additional Security Features 1997; ***CD-ROM ONLY***

IEC 10021-1 DRAFT AMD 4 (DRAFT) Information Technology - Text


Communication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 1: System and ServiceOverview Amendment 4: IPM Security Extensions; (1994) ***CD-ROM ONLY***

IEC 10021-1 DRAFT AMD 5 (DRAFT) Information Technology - Message HandlingSystems (MHS): System and Service Overview; Amendment 5: Fax Cover Page 1997; ***CD-ROM ONLY***

IEC 10021-1 DRAFT AMD 6 (DRAFT) Information Technology - Message HandlingSystems (MHS): System and Service Overview; Amendment 6: Auto-Advise Auto-Action 1997; ***CD-ROM ONLY***

IEC 10021-2 Information Technology - Message Handling Systems (MHS): Overall Architecture Second Edition

IEC 10021-2 DRAFT AMD 1 (DRAFT) Information Technology - Message HandlingSystems (MHS): Overall Architecture; Amendment 1: International Registration Authority 1997; ***CD-ROM ONLY***

IEC 10021-2 DRAFT AMD 2 (DRAFT) Information Technology - Message HandlingSystems (MHS): Overall Architecture; Amendment 2: Use of ISO/IEC 10646 Characters in OR-Addresses1997; ***CD-ROM ONLY***

IEC 10021-2 DRAFT AMD 3 (DRAFT) Information Technology - Message HandlingSystems (MHS): Overall Architecture; Amendment 3: Protected Change Credentials 1997; ***CD-ROMONLY***

IEC 10021-3 Information Technology - Text Communication - Message-Oriented Text Interchange Systems (MOTIS) - Part 3: Abstract Service DefinitionConventions First Edition; (Corrigendum 1-1992)

IEC 10021-4 Information Technology - Message Handling Systems (MHS): Message Transfer System: Abstract ServiceDefinition and Procedures Second Edition

IEC 10021-4 DRAFT AMD 1 (DRAFT) Information Technology - Message HandlingSystems (MHS): Message Transfer System: AbstractService Definition and Procedures; Amendment 1: Useof ISO/IEC 10646 Characters in OR-Addresses 1997; ***CD-ROM ONLY***

IEC 10021-4 DRAFT AMD 2 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 4: Message Transfer System: Abstract Service Definition and ProceduresAmendment 2; (1994) ***CD-ROM ONLY***

IEC 10021-4 DRAFT AMD 2.2 (DRAFT) Information Technology - Message-Handling Systems (MHS): Message Transfer System: Abstract Service Definition and ProceduresAmendment 2: Minor Enhancements: New Values ofError Codes for Security and Security DefectResolution 1997; ***CD-ROM ONLY***

IEC 10021-4 DRAFT AMD 3 (DRAFT) Information Technology - Message HandlingSystems (MHS): Message Transfer System: AbstractService Definition and Procedures; Amendment 3: Using V3 Certificates 1997***CD-ROM ONLY***

IEC 10021-4 DRAFT AMD 4 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 4: Message Transfer System: Abstract Service Definition and Procedures; Amendment 4: Minor Enhancements: New Values ofError Codes for Security; (1996) ***CD-ROM ONLY***

IEC 10021-4 DRAFT AMD 5 (DRAFT) Information Technology - Message HandlingSystems (MHS): Message Transfer System: AbstractService Definition and Procedures; Amendment 5: FaxCover Page ***CD-ROM ONLY***

IEC 10021-5 Information Technology - Message Handling Systems (MHS): Message Store: Abstract Service DefinitionThird Edition


IEC 10021-5 DRAFT AMD 1 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 5: Message Store: AbstractService Definition Amendment 1: Message StoreExtensions and Message Store Logs; 1990 ***CD-ROMONLY***

IEC 10021-5 DRAFT AMD 2 (DRAFT) Information Technology - Message HandlingSystems (MHS): Message Store: Abstract ServiceDefinition - Amendment 2: New Enhancements: NewValues of Error Codes for Security; (1996) ***CD-ROM ONLY***

IEC 10021-5 DRAFT AMD 3 (DRAFT) Information Technology - Message HandlingSystems (MHS): Message Store: Abstract ServiceDefinition; Amendment 3: V3 Certificate Extensions1997 ***CD-ROM ONLY***

IEC 10021-5 DRAFT AMD 5 (DRAFT) Information Technology - Message HandlingSystems (MHS): Message Store: Abstract ServiceDefinition; Amendment 5: Additional SecurityFeatures ***CD-ROM ONLY***

IEC 10021-5 DRAFT AMD 6 (DRAFT) Information Technology - Message HandlingSystems (MHS): Message Store: Abstract ServiceDefinition; Amendment 6: Protected ChangeCredentials ***CD-ROM ONLY***

IEC 10021-6 Information Technology - Message Handling Systems (MHS): Protocol Specifications Second Edition

IEC 10021-6 DRAFT AMD 1 (DRAFT) Information Technology - Message HandlingSystems (MHS): Protocol Specifications; Amendment1: Use of ISO/IEC 10646 Characters in OR-Addresses ***CD-ROM ONLY***

IEC 10021-7 Information Technology - Message Handling Systems (MHS): Interpersonal Messaging System SecondEdition

IEC 10021-7 DRAFT AMD 1 (DRAFT) Information Technology - Message HandlingSystems (MHS): Interpersonal Messaging System; Amendment 1: Additional Security Features ***CD-ROMONLY***

IEC 10021-7 DRAFT AMD 2 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 7: Interpersonal MessagingSystems Amendment 2; (1994) ***CD-ROM ONLY***

IEC 10021-7 DRAFT AMD 3 (DRAFT) Information Technology - Message HandlingSystems (MHS): Interpersonal Messaging System; Amendment 3: Auto-Advise Auto-Action ***CD-ROMONLY***

IEC 10021-7 DRAFT AMD 5 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 7: Interpersonal MessagingSystems Amendment 5: IPM Security Extensions; (1994) ***CD-ROM ONLY***

IEC 10021-7 DRAFT AMD 6 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 7: Interpersonal MessagingSystem Amendment 6: Minor Enhancements: New Valuesof Error Codes for Security 1996 ***CD-ROM ONLY***

IEC 10021-7 DRAFT AMD 7 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 7: Interpersonal MessagingSystem; Amendment 7: Additional IPM CorrelationAttribute; (1996) ***CD-ROM ONLY***

IEC 10021-7 DRAFT AMD1.2 (DRAFT) Information Technology - TextCommunication - Message-Oriented Text InterchangeSystems (MOTIS) - Part 7: Interpersonal MessagingSystem Amendment 1: Minor Enhancements; (1993) ***CD-ROM ONLY***

IEC 10021-8 Information Technology - Message Handling Systems


(MHS) - Part 8: Electronic Data InterchangeMessaging Service First Edition

IEC 10021-9 Information Technology - Message Handling Systems (MHS) - Part 9: Electronic Data InterchangeMessaging System First Edition

IEC 10021-9 DRAFT AMD 1 (DRAFT) Information Technology - Message HandlingSystems (MHS) - Part 9: Electronic Data InterchangeMessaging System Amendment 1: CompressionExtension; 1996;***CD-ROM ONLY***

IEC DIS 10021-10 (DRAFT) Information Technology - Message HandlingSystems (MHS): MHS Routing ***CD-ROM ONLY***

IEC 10022 Information Technology - Open SystemsInterconnection - Physical Service DefinitionSecond Edition

IEC TR 10023 Information Technology - Telecommunications andInformation Exchange Between Systems - FormalDescription of ISO 8072 in LOTOS First Edition (AS/NZS 4164: 1994)

IEC TR 10024 Information Technology - Telecommunications andInformation Exchange Between Systems - FormalDescription of ISO 8073 (Classes 0,1,2,3) in LOTOSFirst Edition (AS/NZS 4165: 1994)

IEC 10025-1 Information Technology - Telecommunications andInformation Exchange Between Systems - TransportConformance Testing for Connection- Mode TransportProtocol - Part 1: Test Suite Structure and TestPurposes for ISO/IEC 8073: 1988 Classes 0, 2 overCONS and 4 over CLNS First Edition

IEC 10025-2 Information Technology - Telecommunications andInformation Exchange Between Systems - TransportConformance Testing for Connection-Mode TransportProtocol - Part 2: Abstract Test Suites and PIXITfor ISO/IEC 8073:1988 Classes 0, 2 Over CONS and 4over CLNS First Edition

IEC 10025-3 Information Technology - Telecommunications andInformation Exchange Between Systems - TransportConformance Testing for Connection-Mode TransportProtocol Operating over Connection-Mode NetworkService - Part 3: Transport Test ManagementProtocol Specification First Edition; (Corrigendum1-1995) (AS/NZS 4210.3: 1994)

IEC 10026-1 Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 1: OSI TP Model First Edition; (AS/NZS 4203.1: 1994) (Corrigendum 1-1996)

IEC DIS 10026-1 (DRAFT) Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 1: OSI TP Model ***CD-ROM ONLY***

IEC 10026-2 Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 2: OSI TP Service Second Edition

IEC DIS 10026-2 (DRAFT) Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 2: OSI TP Series ***CD-ROMONLY***

IEC 10026-3 Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 3: Protocol Specification SecondEdition; (AS/NZS 4203.3: 1994)

IEC DIS 10026-3 (DRAFT) Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 3: Protocol Specification ***CD-ROM ONLY***

IEC 10026-4 Information Technology - Open SystemsInterconnection - Distributed Transaction


Processing: Protocol Implementation ConformanceStatement (PICS) Proforma First Edition

IEC DIS 10026-5 (DRAFT) Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 5: Application Context Proformaand Guidelines When Using OSI TP ***CD-ROM ONLY***

IEC 10026-6 Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 6: Unstructured Data TransferFirst Edition

IEC DIS 10026-7 (DRAFT) Information Technology - Open SystemsInterconnection - Distributed TransactionProcessing - Part 7: Message Queueing ***CD-ROMONLY***

IEC 10027 Information Technology - Information ResourceDictionary System (IRDS) Framework First Edition (AS/NZS 4101: 1993)

IEC 10028 Information Technology - Telecommunications andInformation Exchange Between Systems - Definitionof the Relaying Functions of a Network LayerIntermediate System First Edition (AS/NZS 4209: 1994)

IEC DIS 10028-2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Definition of the Relaying Functions of a NetworkLayer Intermediate System - Part 2: Connection-ModeNetwork Service ***CD-ROM ONLY***

IEC DIS 10028 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunications and Information ExchangeBetween Systems - Definition of the RelayingFunctions of a Network Layer Intermediate SystemAmd. 1: Connectionless- Mode Relaying Functions; (1991) ***CD-ROM ONLY***

IEC TR 10029 Information Technology - Telecommunications andInformation Exchange Between Systems - Operation ofan X.25 Interworking Unit First Edition (NZS/SO/IECTR 10029: 1989) (AS 4015: 1992)

IEC TR 10029 Information Technology - Telecommunications andInformation Exchange between Systems - Operation ofan X.25 Interworking Unit First Edition; NZS/ISO/IEC TR10029: 1989; AS 4015: 1992

IEC 10030 Information Technology - Telecommunications andInformation Exchange Between Systems - End SystemRouteing Information Exchange Protocol for Use inConjunction with ISO/IEC 8878 Second Edition

IEC DIS 10030-2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - EndSystem Routeing Information Exchange Protocol forUse in Conjunction with ISO 8878 - Part 2: ProtocolImplementation Conformance Statement (PICS) ***CD-ROM ONLY***

IEC 10030 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - EndSystem Routeing Information Exchange Protocol forUse in Conjunction with ISO 8878 Amendment 1: Dynamic Discovery of OSI NSAP Addresses by EndSystems; (1992) ***CD-ROM ONLY***

IEC 10031-1 Information Technology - Text and Office Systems - Distributed-Office- Applications Model - Part 1: General Model First Edition (AS/NZS 4109.1: 1993)

IEC 10031-2 Information Technology - Text and Office Systems - Distributed-Office- Applications Model - Part 2: Distinguished- Object-Reference and AssociatedProcedures First Edition (AS/NZS 4109.2: 1993)

IEC 10032 Information Technology - Reference Model of Data


Management First Edition IEC TR 10034 Guidelines for the Preparation of Conformity

Clauses in Programming Language Standards FirstEdition

IEC DIS 10035-1 (DRAFT) Information Technology - Open SystemsInterconnection - Connectionless Protocol for theAssociation Control Service Element: ProtocolSpecification ***CD ROM ONLY***

IEC 10035-1 Information Technology - Open SystemsInterconnection - Connectionless Protocol for theAssociation Control Service Element: ProtocolSpecification Second Edition; Amendment 1-1997

IEC 10035-2 Information Technology - Open SystemsInterconnection - Connectionless Protocol for theAssociation Control Service Element: ProtocolImplementation Conformance Statement (PICS) Proforma First Edition

IEC 10035-2 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Connectionless Protocol for theAssociation Control Service Element: ProtocolImplementation Conformance Statement (PICS) Proforma Amd. 1: Incorporation of Authentication; (1996) ***CD-ROM ONLY***

IEC 10036 Information Technology - Font InformationInterchange - Procedures for Registration of Font-Related Identifiers Second Edition (AS/NZS 4208: 1994)

IEC 10036 DRAFT AMD 1 (DRAFT) Information Technology - Font InformationInterchange - Procedure for Registration of Glyphand Glyph Collection Identifiers Amendment 1: Registration of ISO/IEC 9541 and ISO/IEC 10180, Font Resources and Glyph Index Map 1995 ***CD-ROMONLY***

IEC TR 10037 Information Technology - SGML and Text-EntrySystems - Guidelines for SGML Syntax-DirectedEditing Systems First Edition (AS/NZS 4110: 1993)

IEC 10038 Information Technology - Telecommunications andInformation Exchange Between Systems - Local AreaNetworks - Media Access Control (MAC) Bridges FirstEdition; (ANSI/IEEE 802.1D) (AS/NZS 4802.1:Supp 1: 1994)

IEC DIS 10038 DRAFT AMD 2 (DRAFT) Information Technology - Telecommunications and Information ExchangeBetween Systems - Local Area Networks - MediaAccess Control (MAC) Bridges Amendment 2: SourceRouteing Supplement; (1992) ***CD-ROM ONLY***

IEC 10040 Information Technology - Open SystemsInterconnection - Systems Management Overview FirstEdition; (Corrigendum 1-1994) (Amendment 1-1995) (AS/NZS 3692:1993) (Corrigendum 2-1996)

IEC 10040 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management OverviewAmendment 2: Management Domains Architecture; (1994) ***CD-ROM ONLY***

IEC 10040 DRFT AMD 2.2 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management OverviewAmendment 2: Management Domains Architecture; (1995) ***CD-ROM ONLY***

IEC 10089 Information Technology - 130 mm Rewritable OpticalDisk Cartridge for Information Interchange FirstEdition

IEC 10090 Information Technology - 90 mm Optical DiskCartridges, Rewritable and Read Only, for DataInterchange First Edition

IEC TR 10091 Information Technology - Technical Aspects of 130


mm Optical Disk Cartridge Write-Once RecordingFormat First Edition

IEC DIS 10116 (DRAFT) Information Technology - SecurityTechniques - Modes of Operation for an N-Bit BlockCipher Algorithm ***CD-ROM ONLY***

IEC 10116 Information Technology - Security Techniques - Modes of Operation for an n-Bit Block CipherSecond Edition

IEC 10118-1 Information Technology - Security Techniques - Hash-Functions - Part 1: General First Edition

IEC 10118-2 Information Technology - Security Techniques - Hash-Functions - Part 2: Hash-Functions Using ann-Bit Block Cipher Algorithm First Edition

IEC DIS 10118-3 (DRAFT) Information Technology - SecurityTechniques - Hash-Functions - Part 3: DedicatedHash-Functions ***CD-ROM ONLY***

IEC DIS 10118-4 (DRAFT) Information Technology - SecurityTechniques - Hash-Functions - Part 4: Hash-Functions Using Modular Arithmetic ***CD-ROMONLY***

IEC 10149 Information Technology - Data Interchange on Read-Only 120 mm Optical Data Disks (CD-ROM) SecondEdition

IEC 10164-1 Information Technology - Open SystemsInterconnection - Systems Management: ObjectManagement Function First Edition; CCITT RECMNX.730; AS/NZS 4152.1: 1994; CAN/CSA-ISO/IEC-10164-1-95; Amendment 1-1996; Corrigendum1-1996

IEC 10164-2 Information Technology - Open SystemsInterconnection - Systems Management: StateManagement Function First Edition; CCITT RECMNX.731; AS/NZS 4152.2: 1994; CAN/CSA-ISO/IEC-10164-2-95; Amendment 1-1996; Corrigendum1-1996

IEC 10164-3 Information Technology - Open SystemsInterconnection - Systems Management: Attributesfor Representing Relationships First Edition; CCITTRECMN X.733; CAN/CSA-ISO/IEC-10164-3-95; Amendment1 - 05/15/1996; Corrigendum 1 - 12/15/1996

IEC 10164-3 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: Attributesfor Representing Relationships Amendment 1: ICSProformas 1993 ***CD-ROM ONLY***

IEC 10164-4 Information Technology - Open SystemsInterconnection - Systems Management: AlarmReporting Function First Edition; CCITT RECMNX.733; Corrigendum 1-12/15/1996; AS/NZS 4152.4: 1994; Amendment 1- 12/15/1995; CAN/CSA-ISO/IEC10164-4-95; Corrigendum 1-09/01/1994; Corrigendum1-12/15/1996

IEC 10164-5 Information Technology - Open SystemsInterconnection - Systems Management: Event ReportManagement Function First Edition; CCITT RECMNX.734; Corrigendum 1-12/15/1996; AS/NZS 4152.5: 1994; Amendment 1-12/15/1995

IEC 10164-5 DRAFT AMD 3 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: Event ReportManagement Function Amendment 3: SM - Event ReportManagement Function - Enhanced Event Control; (1996) ***CD-ROM ONLY***

IEC 10164-6 Information Technology - Open SystemsInterconnection - Systems Management: Log ControlFunction First Edition; AS/NZS 4152.6: 1994; CAN/CSA-ISO/IEC 10164-6-95; Amendment 1-05/15/1996;


Corrigendum 1-12/15/1996 IEC 10164-7 Information Technology - Open Systems

Interconnection - Systems Management: SecurityAlarm Reporting Function First Edition; CCITT RECMNX.736; AS/NZS 4152.7: 1993; Amendment 1-1995; CAN/CSA-ISO/IEC 10164-7-95; Corrigendum 1-1996

IEC 10164-8 Information Technology - Open SystemsInterconnection - Systems Management: SecurityAudit Trail Function First Edition; CCITT RECMNX.740; AS/NZS 4152.8: 1994; Corrigendum 1-1995; Corrigendum 2-1996

IEC 10164-9 Information Technology - Open SystemsInterconnection - Systems Management: Objects andAttributes for Access Control First Edition; CCITTRECMN X.741; Corrigendum 1-1996

IEC 10164-10 Information Technology - Open SystemsInterconnection - Systems Management: UsageMetering Function for Accounting Purposes FirstEdition

IEC DIS 10164-10 .2 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: UsageMetering Function ***CD-ROM ONLY***

IEC 10164-10 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: UsageMetering Function Amendment 1: ImplementationConformance Statement Proformas 1997; ***CD-ROMONLY***

IEC 10164-11 Information Technology - Open SystemsInterconnection - Systems Management: MetricObjects and Attributes First Edition

IEC 10164-11 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: MetricObjects and Attributes Amendment 1: ICS Proformas; (1995) ***CD-ROM ONLY***

IEC 10164-12 Information Technology - Open SystemsInterconnection - Systems Management: TestManagement Function First Edition

IEC 10164-13 Information Technology - Open SystemsInterconnection - Systems Management: SummarizationFunction First Edition; Amendment 1 04/01/1997

IEC 10164-13 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: SummarizationFunction Amendment 1: ICS Proforma; (1995) ***CD-ROM ONLY***

IEC 10164-13 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: SummarizationFunction Amendment 2: Enhanced Scanner Objects (1996) ***CD-ROM ONLY***

IEC 10164-14 Information Technology - Open SystemsInterconnection - Systems Management: Confidenceand Diagnostic Test Categories First Edition

IEC DIS 10164-14 .2 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management - Part 14: Confidence and Diagnostic Test Categories ***CD-ROMONLY***

IEC 10164-15 Information Technology - Open SystemsInterconnection - Systems Management: SchedulingFunction First Edition

IEC 10164-16 Information Technology - Open SystemsInterconnection - Systems Management: ManagementKnowledge Management Function First Edition

IEC DIS 10164-16 .2 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: ManagementKnowledge Management Function ***CD-ROM ONLY***


IEC 10164-16 DRAFT AMD 1 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: ManagementKnowledge Management Function; Amendment 1: Extension for General Relationship Model 1997 ***CD-ROM ONLY***

IEC 10164-17 Information Technology - Open SystemsInterconnection - Systems Management: Change overFunction First Edition

IEC 10164-18 Information Technology - Open SystemsInterconnection - Systems Management: SoftwareManagement Function First Edition

IEC DIS 10164-19 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management - Part 19: Management Domain and Management Policy ManagementFunctions ***CD-ROM ONLY***

IEC DIS 10164-20 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: TimeManagemnt Function (ITU-T Rec. X743) ***CD-ROMONLY***

IEC DIS 10164-21 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: CommandSequencer ***CD-ROM ONLY***

IEC DIS 10164-22 (DRAFT) Information Technology - Open SystemsInterconnection - Systems Management: Response TimeMonitoring Function ***CD-ROM ONLY***

IEC 10165-1 Information Technology - Open SystemsInterconnection - Structure of ManagementInformation: Management Information Model FirstEdition; (Corrigendum 1-1994) (AS/NZS 4151.1: 1994) (Amendment 1-1996)

IEC 10165-2 Information Technology - Open SystemsInterconnection - Structure of ManagementInformation: Definition of Management InformationFirst Edition; CCITT RECMN X.721; Corrigendum1-1994; AS/NZS 4151.2: 1993; Corrigendum 2-1996

IEC 10165-2 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Structure of ManagementInformation: Definition of Management InformationAmendment 2: Enhanced Event Control 1996 ***CD-ROMONLY***

IEC 10165-4 Information Technology - Open SystemsInterconnection - Structure of ManagementInformation - Part 4: Guidelines for the Definitionof Managed Objects First Edition; AS/NZS 4151.4: 1993; Amendment 1-1996; Corrigendum 1-1996

IEC DIS 10165-4 DRAFT AMD 2 (DRAFT) Information Technology - Open SystemsInterconnection - Structure of ManagementInformation - Part 4: Guidelines for the Definitionof Managed Objects Amendment 2: Addition of the NO-MODIFY Syntax Element and Guideline Extensions1996 ***CD-ROM ONLY***

IEC DIS 10165-4 DRAFT AMD 3 (DRAFT) Information Technology - Open SystemsInterconnection - Structure of ManagementInformation: Part 4: Guidelines for the Definitionof Managed Objects Amendment 3: Guidelines for theUse of Z for Managed Object Behaviour 1996 ***CD-ROM ONLY***

IEC 10165-4 DRAFT AMD 4 (DRAFT) Information Technology - Open SystemsInterconnection - Structure of ManagementInformation: Guidelines for the Definition ofManaged Objects Amendment 4: GDMO+: Specifying theBehaviour of Managed Objects 1997; ***CD-ROMONLY***

IEC 10165-5 Information Technology - Open SystemsInterconnection - Structure of Management


Information: Generic Management Information FirstEdition

IEC 10165-6 Information Technology - Open SystemsInterconnection - Structure of ManagementInformation: Requirements and Guidelines forImplementation Conformance Statement ProformasAssociated with OSI Management Second Edition

IEC 10165-7 Information Technology - Open SystemsInterconnection - Structure of ManagementInformation: General Relationship Model FirstEdition

IEC 10166-1 Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 1: Abstract Service Definition and Procedures FirstEdition; Corrigendum 1-1994; Corrigendum 2-1994; Corrigendum 3-1994; AS/NZS 4167.1: 1994; Amendment1-1995; Amendment 2-1996

IEC 10166-2 Information Technology - Text and Office Systems - Document Filing and Retrieval (DFR) - Part 2: Protocol Specification First Edition; (Corrigendum1-1994) (Corrigendum 2-1995) (Amendment 1-1995) (AS/NZS 4167.2: 1994) (Amendment 2-1996)

IEC 10166-2 DRAFT AMD 2 (DRAFT) Information Technology - Text and OfficeSystems - Document Filing and Retrieval (DFR) - Part 2: Protocol Specification Amendment 2: Combined Usage of DFR and DTAM 1995 ***CD-ROMONLY***

IEC TR 10167 Information Technology - Open SystemsInterconnection - Guidelines for the Application ofEstelle, LOTOS and SDL First Edition; AS/NZS 3687: 1993

IEC 10168-1 Information Technology - Open SystemsInterconnection - Conformance Test Suite for theSession Protocol - Part 1: Test Suite Structure andTest Purposes First Edition

IEC 10168-4 Information Technology - Open SystemsInterconnection - Conformance Test Suite for theSession Protocol - Part 4: Test Management ProtocolSpecification First Edition

IEC 10169-1 Information Technology - Open SystemsInterconnection - Conformance Test Suite for theACSE Protocol - Part 1: Test Suite Structure andTest Purposes First Edition; AS/NZS 4150.1: 1993

IEC 10170-1 Information Technology - Open SystemsInterconnection - Conformance Test Suite for theFTAM Protocol - Part 1: Test Suite Structure andTest Purposes First Edition (AS/NZS 4218.1: 1994)

IEC TR 10171 Information Technology - Telecommunications andInformation Exchange Between Systems - List ofStandard Data Layer Link Protocols That UtilizeHigh-Level Data Link Control (HDLC) Classes ofProcedures and List of Standardized XID FormatIdentifiers and Private Parameter SetIdentification Values

IEC TR 10172 Information Technology - Telecommunications andInformation Exchange Between Systems - Network/Transport Protocol Interworking Specification FirstEdition; AS/NZS 4104: 1993

IEC 10173 Information Technology - Integrated ServicesDigital Network (ISDN) Primary Access Connector atReference Points S and T First Edition; AS/NZS4102: 1993

IEC DIS 10173 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - Interface Connector and Contact Assignments for


ISDN Primary Rate Access Connector Located atReference Points S and T ***CD-ROM ONLY***

IEC 10175-1 Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 1: Abstract Service Definition and Procedures FirstEdition

IEC 10175-2 Information Technology - Text and Office Systems - Document Printing Application (DPA) - Part 2: Protocol Specification First Edition

IEC DIS 10175-3 (DRAFT) Information Technology - Document PrintingApplication (DPA) - Part 3: Management AbstractService Definitions and Procedures ***CD-ROMONLY***

IEC TR 10176 Information Technology - Guidelines for thePreparation of Programming Language Standards FirstEdition

IEC 10177 Information Technology - Telecommunications andInformation Exchange Between Systems - Provision ofthe Connection-Mode Network Internal Layer Serviceby Intermediate Systems Using ISO/IEC 8208, theX.25 Packet Layer Protocol First Edition; AS/NZS4217: 1994

IEC TR 10178 Information Technology - Telecommunications andInformation Exchange Between Systems - theStructure and Coding of Logical Link ControlAddresses in Local Area Networks First Edition; AS/NZS 4147: 1993

IEC 10179 Information Technology - Processing Languages - Document Style Semantics and SpecificationLanguage (DSSSL) First Edition

IEC DIS 10179.2 (DRAFT) Information Technology - Text and OfficeSystems - Document Style Semantics andSpecification Language (DSSSL) ***CD-ROM ONLY***

IEC 10180 Information Technology - Processing Languages - Standard Page Description Language (SPDL) FirstEdition

IEC 10181-1 Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Overview First Edition

IEC 10181-2 Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Authentication Framework First Edition

IEC DIS 10181-2. 2 (DRAFT) Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Authentication Framework

IEC 10181-3 Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Access Control Framework First Edition

IEC 10181-4 Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Non-Repudiation Framework First Edition

IEC DIS 10181-4. 2 (DRAFT) Information Technology - Open SystemsInterconnection - Security Frameworks in OpenSystems - Part 4: Non-Repudiation

IEC 10181-5 Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Confidentiality Framework First Edition

IEC 10181-6 Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Integrity Framework First Edition

IEC 10181-7 Information Technology - Open SystemsInterconnection - Security Frameworks for OpenSystems: Security Audit and Alarms Framework FirstEdition


IEC TR 10182 Information Technology - Programming Languages, Their Environments and System Software Interfaces - Guidelines for Language Bindings First Edition

IEC TR 10183-1 Information Technology - Text and Office Systems - Office Document Architecture (ODA) andInterchange Format - Technical Report on ISO 8613Implementation Testing - Part 1: TestingMethodology First Edition

IEC TR 10183-2 Information Technology - Text and Office Systems - Office Document Architecture (ODA) andInterchange Format - Technical Report on ISO 8613Implementation Testing - Part 2: Framework forAbstract Test Cases First Edition

IEC DIS 10192- 1.2 (DRAFT) Information Technology - Home ElectronicSystem (HES) - Part 1: Introduction ***CD-ROMONLY***

IEC 10206 Information Technology - Programming Languages - Extended Pascal First Edition

IEC 10279 Information Technology - Programming Languages - Full BASIC First Edition; (Amendment 1-1994)

IEC 10367 Information Technology - Standardized Coded GraphicCharacter Sets for Use in 8-Bit Codes First Edition

IEC 10373 Identification Cards - Test Methods First Edition; (CEN PREN 30373:1994)

IEC DIS 10373-1 (DRAFT) Identification Cards - Test Methods - Part1: General Characteristics Tests ***CD-ROM ONLY***

IEC DIS 10373-2 (DRAFT) Identification Cards - Test Methods - Part2: Cards with Magnetic Stripes ***CD-ROM ONLY***

IEC DIS 10373-5 (DRAFT) Identification Cards - Test Methods - Part5: Optical Memory Cards ***CD-ROM ONLY***

IEC 10514-1 Information Technology - Programming Languages - Part 1: Modula-2, Base Language First Edition

IEC DIS 10514-2 (DRAFT) Information Technology - ProgrammingLanguages - Part 2: Modula-2, Generic in Modula-2 ***CD-ROM ONLY***

IEC DIS 10514-3 (DRAFT) Information Technology - ProgrammingLanguages - Part 3: Modula-2, Object-OrientedModula-2 ***CD-ROM ONLY***

IEC 10536-1 Identification Cards - Contactless IntegratedCircuit(s) Cards - Part 1: Physical CharacteristicsFirst Edition; CEN PREN 30536-1: 1994; EN ISO/IEC10536-1: 1994

IEC 10536-2 Identification Cards - Contactless IntegratedCircuit(s) Cards - Part 2: Dimensions and Locationof Coupling Areas First Edition

IEC 10536-3 Identification Cards - Contactless IntegratedCircuit(s) Cards - Part 3: Electronic Signals andReset Procedures First Edition

IEC 10538 Information Technology - Control Functions for TextCommunication First Edition

IEC 10561 Information Technology - Printing Devices - Methodfor Measuring Printer Throughput First Edition

IEC DIS 10561 (DRAFT) Information Technology - Office Equipment - Method for Measuring Throughput - Class 1 andClass 2 Printers ***CD-ROM ONLY***

IEC 10588 Information Technology - Use of X.25 Packet LayerProtocol in Conjunction with X.21/X.21 bis toProvide the OSI Connection-Mode Network ServiceFirst Edition; (CCITT RECMN X.613)

IEC 10589 Information Technology - Telecommunications andInformation Exchange Between Systems - IntermediateSystem to Intermediate System Intra-Domain RouteingInformation Exchange Protocol for Use inConjunction with the Protocol for Providing the


Connectionless-Mode Network Service (ISO 8473) First Edition; Corrigendum 1 05/01/1993; Corrigendum 2 07/01/1996; Amendment 1 07/15/96; Corrigendum 3 12/15/1996

IEC ISP 10607-1 Information Technology - International StandardizedProfiles AFTnn - File Transfer, Access andManagement - Part 1: Specification of ACSE, Presentation and Session Protocols for the Use byFTAM Second Edition

IEC ISP 10607-2 Information Technology - International StandardizedProfiles AFTnn - File Transfer, Access andManagement - Part 2: Definition of Document Types, Constraint Sets and Syntaxes Second Edition

IEC ISP 10607-2 DRFT AMD 3 (DRAFT) Information Technology - InternationalStandardized Profiles AFTnn - File Transfer, Accessand Management - Part 2: Definition of DocumentTypes, Constraint Sets and Syntaxes Amendment 3: Additional Definitions; (1994) ***CD-ROM ONLY***

IEC ISP 10607-3 Information Technology - International StandardizedProfiles AFTnn - File Transfer, Access andManagement - Part 3: AFT11 - Simple File TransferService (Unstructured) Second Edition

IEC ISP 10607-4 Information Technology - International StandardizedProfiles AFTnn - File Transfer, Access andManagement - Part 4: AFT12 - Positional FileTransfer Service (Flat) Second Edition

IEC ISP 10607-5 Information Technology - International StandardizedProfiles AFTnn - File Transfer, Access andManagement - Part 5: AFT22 - Positional File AccessService (Flat) Second Edition

IEC ISP 10607-6 Information Technology - International StandardizedProfiles AFTnn - File Transfer, Access andManagement - Part 6: AFT3 - File Management ServiceSecond Edition

IEC ISP 10608-1 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part 1: General Overview and Subnetwork-IndependentRequirements First Edition

IEC ISP 10608-1 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 1: General Overview and Subnetwork-Independent Requirements Amendment 1: ReferenceOptional Security Requirements - TAnnnn 1996 ***CD-ROM ONLY***

IEC ISP 10608-2 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part 2: TA51 Profile Including Subnetwork-DependentRequirements for CSMA/CD Local Area Networks (LANs) First Edition

IEC ISP 10608-2 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 2: TA51 Profile IncludingSubnetwork-Dependent Requirements for CSMA/CD LocalArea Networks (LANS) Amendment 1: Addition ofManagement Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10608-4 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part 4: Definition of Profile TA53, Operation over a TokenRing LAN Subnetwork First Edition

IEC ISP 10608-4 DRAFT AMD 1 (DRAFT) Information Technology - International


Standardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 4: Definition of Profile TA53, Operation over a Token Ring LAN SubnetworkAmendment 1: Addition of Management Requirements1996 ***CD-ROM ONLY***

IEC ISP 10608-5 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part 5: TA1111/TA1121 Profiles Including Subnetwork-Dependent Requirements for X.25 Packet-SwitchedData Networks Using Virtual Calls First Edition

IEC ISP 10608-5 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 5: TA1111/TA1121 Profiles IncludingSubnetwork-Dependent Requirements for X.25 Packet-Switched Data Networks Using Virtual CallsAmendment 1: Reference Optional SecurityRequirements Specific to X.25 Subnetworks - TA11n11996 ***CD-ROM ONLY***

IEC ISP 10608-5 DRAFT AMD 2 (DRAFT) Information Technology - InternationalStandardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 5: TA1111/TA1121 Profiles IncludingSubnetwork-Dependent Requirements for X.25 Packet-Switched Data Networks Using Virtual CallsAmendment 2: Addition of Management Requirements1996 ***CD-ROM ONLY***

IEC ISP 10608-6 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part 6: Definition of Profile TA54, Operation over an FDDILAN Subnetwork First Edition

IEC ISP 10608-6 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 6: Definition of Profile TA54, Operation over an FDDI LAN Subnetwork Amendment 1: Addition of Systems Management Requirements 1996 ***CD-ROM ONLY***

IEC DISP 10608-7 (DRAFT) Information Technology - InternationalStandardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 7: Security Employing the NetworkLayer Security Protocol - Connectionless-Mode, forTAnnnn Profiles ***CD-ROM ONLY***

IEC DISP 10608-8 (DRAFT) Information Technology - InternationalStandardized Profile TAnnnn - Connection-ModeTransport Service over Connectionless-Mode NetworkService - Part 8: Security Employing the NetworkLayer Security Protocol - Connection-Mode with SDT-PDU Based Protection over X.25 Packet Switched DataNetworks Using Virtual Calls, for TA1111/TA1121Profiles ***CD-ROM ONLY***

IEC ISP 10608-12 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part12: MAC Sublayer and Physical Layer DependentRequirements for a CSMA/CD LAN Subnetwork FirstEdition

IEC ISP 10608-13 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part13: MAC Sublayer and Physical Layer Dependent


Requirements for a Token Ring LAN Subnetwork FirstEdition

IEC ISP 10608-14 Information Technology - International StandardizedProfile TAnnnn - Connection-Mode Transport Serviceover Connectionless-Mode Network Service - Part14: MAC, PHY and PMD Sublayer Dependent and StationManagement Requirements over an FDDI LAN SubnetworkFirst Edition

IEC ISP 10609-1 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 1: Subnetwork-Type IndependentRequirements for Group TB First Edition; AS/NZS4170.1: 1994

IEC ISP 10609-2 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 2: Subnetwork-Type IndependentRequirements for Group TC First Edition; AS/NZS4170.2: 1994

IEC ISP 10609-3 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 3: Subnetwork-Type IndependentRequirements for Group TD First Edition; AS/NZS4170.3: 1994

IEC ISP 10609-4 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 4: Subnetwork-Type IndependentRequirements for Group TE First Edition; AS/NZS4170.4: 1994

IEC ISP 10609-5 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 5: Definition of Profiles TB1111/TB1121 First Edition; AS/NZS 4170.5: 1994

IEC DISP 10609-5 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profiles TB, TC, TDand TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 5: Definition of Profiles TB1111/TB1121 Amendment 1: Addition of Management Requirements ***CD-ROMONLY***; 1998

IEC ISP 10609-6 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 6: Definition of Profiles TC1111/TC1121 First Edition; AS/NZS 4170.6: 1994

IEC DISP 10609-6 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profiles TB, TC, TDand TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 6: Definition of Profiles TC1111/TC1121 Amendment 1: Addition of Management Requirements ***CD-ROMONLY***; 1998

IEC ISP 10609-7 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 7: Definition of Profiles TD1111/TD1121 First Edition; AS/NZS 4170-7: 1994

IEC DISP 10609-7 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profiles TB, TC, TDand TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 7:


Definition of Profiles TD1111/TD1121 Amendment 1: Addition of Management Requirements ***CD-ROMONLY***; 1998

IEC ISP 10609-8 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 8: Definition of Profiles TE1111/TE1121 First Edition; AS/NZS 4170.8: 1994

IEC DISP 10609-8 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profiles TB, TC, TDand TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 8: Definition of Profiles TE1111/TE1121 Amendment 1: Addition of Management Requirements ***CD-ROMONLY***; 1998

IEC ISP 10609-9 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 9: Subnetwork-Type DependentRequirements for Network Layer, Data Link Layer andPhysical Layer Concerning Permanent Access to aPacket Switched Data Network Using Virtual CallsFirst Edition; AS/NZS 4170.9: 1994

IEC ISP 10609-9 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 9: Subnetwork-Type Dependent Requirements for NetworkLayer, Data Link Layer and Physical LayerConcerning Permanent Access to a Packet SwitchedData Network Using Virtual Calls Amendment 1: Reference Optional Security Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10609-10 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 10: LAN Subnetwork-Dependent, Media-Independent Requirements First Edition

IEC ISP 10609-11 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 11: CSMA/CD Subnetwork-Dependent, Media-Dependent Requirements First Edition

IEC ISP 10609-12 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 12: Definition of Profile TC51, Provision of the OSI Connection-Mode TransportService Using the OSI Connection-Mode NetworkService in an End System Attached to a CSMA/CD LANFirst Edition

IEC DISP 10609-12 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profiles TB, TC, TDand TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 12: Definition of Profile TC51, Provision of the OSIConnection-Mode Transport Service Using the OSIConnection-Mode Network Service in an End SystemAttached to a CSMA/CD LAN Amendment 1: Addition ofManagement Requirements ***CD-ROM ONLY***; 1998

IEC ISP 10609-14 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 14: Definition of Profile TC53, Provision of the OSI Connection-Mode Transport


Service Using the OSI Connection-Mode NetworkService in an End System Attached to a Token RingLAN First Edition

IEC DISP 10609-14 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profiles TB, TC, TDand TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 14: Definition of Profile TC53, Provision of the OSIConnection-Mode Transport Service Using the OSIConnection-Mode Network Service in an End SystemAttached to a Token Ring LAN Amendment 1: Additionof Management Requirements ***CD-ROM ONLY***; 1998

IEC ISP 10609-15 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 15: Definition of Profile TC54, Provision of the OSI Connection-Mode TransportService Using the OSI Connection-Mode NetworkService in an End System Attached to an FDDI LANFirst Edition

IEC DISP 10609-15 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profiles TB, TC, TDand TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 15: Definition of Profile TC54, Provision of the OSIConnection-Mode Transport Service Using the OSIConnection-Mode Network Service in an End SystemAttached to an FDDI LAN Amendment 1: Addition ofManagement Requirements ***CD-ROM ONLY***; 1998

IEC DISP 10609- 16 (DRAFT) Information Technology - InternationalStandardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 16: SecurityEmploying the Network Layer Security Protocol - Connection-Mode, with No-Header, for TB, TC, TD, and TE Profiles ***CD-ROM ONLY***

IEC DISP 10609- 17 (DRAFT) Information Technology - InternationalStandardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service overConnection-Mode Network Service - Part 17: SecurityEmploying the Network Layer Security Protocol - Connection-Mode, with SDT-PDU Based Protection, for TB/TC/TD/TEnnn Profiles ***CD-ROM ONLY***

IEC ISP 10609-20 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 20: Overview of the GeneralizedMulti-Part ISP Structure for TC and TD GroupProfiles for OSI Usage of ISDN First Edition

IEC ISP 10609-21 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 21: Subnetwork-Type DependentRequirements for Network Layer and Data Link Layerfor ISDN B-Channel X.25 DTE to DTE Operation FirstEdition

IEC ISP 10609-22 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 22: Subnetwork-Type DependentRequirements for Network Layer and Data Link Layerfor ISDN B-Channel X.25 DTE to DCE Operation FirstEdition

IEC ISP 10609-23 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-Mode


Transport Service over Connection-Mode NetworkService - Part 23: Subnetwork-Type DependentRequirements for Network Layer and Data Link Layerfor Data Transfer Concerning a Packet Switched ModeIntegrated Services Digital Network Using VirtualCalls: B-Channel Access Case First Edition

IEC ISP 10609-24 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 24: Subnetwork-Type DependentRequirements for Network Layer and Data Link Layerfor Data Transfer Concerning a Packet Switched ModeIntegrated Services Digital Network Using VirtualCalls: D-Channel Access Case First Edition

IEC ISP 10609-25 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 25: Subnetwork-Type DependentRequirements for Q.931 Circuit-Switched OperationFirst Edition

IEC ISP 10609-26 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 26: Subnetwork-Type DependentRequirements for Network Layer for Call ControlProcedures Concerning the Outgoing Call of a PacketSwitched Mode Integrated Services Digital Networkin Case B Using Virtual Calls First Edition

IEC ISP 10609-27 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 27: Subnetwork-Type DependentRequirements for Network Layer for Call ControlProcedures Concerning the Incoming Call of a PacketSwitched Mode Integrated Services Digital Networkin Case B Using Virtual Calls First Edition

IEC ISP 10609-28 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 28: Subnetwork-Type DependentRequirements for Data Link Layer for End SystemsAttached to an ISDN Subnetwork First Edition

IEC ISP 10609-30 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 30: Definition of Profile TC1131First Edition




IEC ISP 10609-34 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode Network


Service - Part 34: Definition of Profile TC43111First Edition





IEC ISP 10609-40 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode NetworkService - Part 40: Definition of Profile TD1131First Edition








IEC ISP 10609-48 Information Technology - International StandardizedProfiles TB, TC, TD and TE - Connection-ModeTransport Service over Connection-Mode Network


Service - Part 48: Definition of Profile TD4331First Edition

IEC ISP 10610-1 Information Technology - International StandardizedProfile FOD11 - Open Document Format: SimpleDocument Structure - Character Content ArchitectureOnly - Part 1: Document Application Profile (DAP) First Edition; Technical Corrigendum 1-1998

IEC DISP 10611-1 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH1n - Message Handling Systems - Common Messaging - Part 1: MHS Service Support ***CD-ROM ONLY***

IEC ISP 10611-1 Information Technology - International StandardizedProfiles AMH1n - Message Handling Systems - CommonMessaging - Part 1: MHS Service Support SecondEdition

IEC ISP 10611-1 DRAFT AMD 1 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH1n - Message Handling Systems - Common Messaging - Part 1: MHS Service Support Amendment 1: MessageStore Extensions 1996 ***CD-ROM ONLY***

IEC DISP 10611-2 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH1n - Message Handling Systems - Common Messaging - Part 2: Specification of ROSE, RTSE, ACSE, Presentation and Session Protocols for Use by MHS ***CD-ROM ONLY***

IEC ISP 10611-2 Information Technology - International StandardizedProfiles AMH1n - Message Handling Systems - CommonMessaging - Part 2: Specification of ROSE, RTSE, ACSE, Presentation and Session Protocols for Use byMHS Second Edition

IEC DISP 10611-3 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH1n - Message Handling Systems - Common Messaging - Part 3: AMH11 - Message Transfer (P1) ***CD-ROMONLY***

IEC ISP 10611-3 Information Technology - International StandardizedProfiles AMH1n - Message Handling Systems - CommonMessaging - Part 3: AMH11 - Message Transfer (P1) Second Edition

IEC DISP 10611-4 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH1n - Message handling Systems - Common Messaging - Part 4: AMH12 and AMH24 - MTS Access (P3) ***CD-ROM ONLY***

IEC ISP 10611-4 Information Technology - International StandardizedProfiles AMH1n - Message Handling Systems - CommonMessaging - Part 4: AMH12 and AMH14 - MTS Access (P3) and MTS 94 Access (P3) Second Edition

IEC DISP 10611-5 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH1n - Message Handling Systems - Common Messaging - Part 5: AMH13 - MS Access (P7) **CD-ROM ONLY***

IEC ISP 10611-5 Information Technology - International StandardizedProfiles AMH1n - Message Handling Systems - CommonMessaging - Part 5: AMH13 - MS Access (P7) SecondEdition

IEC DISP 10611-6 (DRAFT) Information Technology - InternationalStandardized Profiles AMH1n - Message HandlingSystems - Common Messaging - Part 6: AMH15 - MS 94Access (P7) ***CD-ROM ONLY***

IEC ISP 10612-1 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 1: Subnetwork-Independent Requirements First Edition


IEC ISP 10612-2 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 2: CSMA/CD LANSubnetwork-Dependent, Media-Dependent RequirementsFirst Edition

IEC ISP 10612-3 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 3: Token Ring LANSubnetwork-Dependent, Media-Dependent RequirementsFirst Edition

IEC ISP 10612-4 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 4: Profile RD51.51 (CSMA/CD LAN - CSMA/CD LAN) First Edition

IEC ISP 10612-4 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RD - Relaying the MAC ServiceUsing Transparent Bridging - Part 4: ProfileRD51.51 (CSMA/CD LAN - CSMA/CD LAN) Amendment 1: Addition of Management Requirements 1996 ***CD-ROMONLY***

IEC ISP 10612-5 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 5: Profile RD51.54 (CSMA/CD LAN - FDDI LAN) First Edition

IEC ISP 10612-5 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RD - Relaying the MAC ServiceUsing Transparent Bridging - Part 5: ProfileRD51.54 (CSMA/CD LAN - FDDI LAN) Amendment 1: Addition of Systems Management Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10612-6 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 6: Profile RD54.54 (FDDI LAN - FDDI LAN) First Edition

IEC ISP 10612-6 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RD - Relaying the MAC ServiceUsing Transparent Bridging - Part 6: ProfileRD54.54 (FDDI LAN - FDDI LAN) Amendment 1: Additionof Systems Management Requirements 1996 ***CD-ROMONLY***

IEC ISP 10612-7 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 7: Profile RD51.53 (CSMA/CD LAN - Token Ring LAN) First Edition

IEC ISP 10612-7 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RD - Relaying the MAC ServiceUsing Transparent Bridging - Part 7: ProfileRD51.53 (CSMA/CD LAN - Token Ring LAN) Amendment1: Addition of Management Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10612-8 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 8: Profile RD53.53 (Token Ring LAN - Token Ring LAN) First Edition

IEC ISP 10612-8 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RD - Relaying the MAC ServiceUsing Transparent Bridging - Part 8: ProfileRD53.53 (Token Ring LAN - Token Ring LAN) Amendment1: Addition of Management Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10612-9 Information Technology - International StandardizedProfile RD - Relaying the MAC Service UsingTransparent Bridging - Part 9: Profile RD53.54 (Token Ring LAN - FDDI LAN) First Edition

IEC ISP 10612-9 DRAFT AMD 1 (DRAFT) Information Technology - International


Standardized Profile RD - Relaying the MAC ServiceUsing Transparent Bridging - Part 9: ProfileRD53.54 (Token Ring LAN - FDDI LAN) Amendment 1: Addition of Systems Management Requirements; (1996) ***CD-ROM ONLY***

IEC ISP 10613-1 Information Techonology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 1: Subnetwork-Independent Requirements First Edition

IEC ISP 10613-1 DRAFT AMD 2 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 1: Subnetwork-Independent Requirements Amendment 2: Reference Optional Security Requirements - Rann.nnProfiles 1996 ***CD-ROM ONLY***

IEC ISP 10613-2 Information Techonology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 2: LANSubnetwork-Dependent, Media-IndependentRequirements First Edition

IEC ISP 10613-3 Information Techonology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 3: CSMA/CD LAN Subnetwork-Dependent, Media-DependentRequirements First Edition

IEC ISP 10613-4 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 4: FDDI LAN Subnetwork-Dependent, Media-Dependent Requirements FirstEdition

IEC ISP 10613-5 Information Techonology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 5: Definition of Profile RA51.51, Relaying theConnectionless-Mode Network Service Between CSMA/CDLAN Subnetworks First Edition

IEC ISP 10613-5 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 5: Definition of Profile RA51.51, Relaying theConnectionless-Mode Network Service between CSMA/CDLAN Subnetworks Amendment 1: Addition of ManagementRequirements 1996 ***CD-ROM ONLY***

IEC ISP 10613-6 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 6: Definition of ProfileRA51.54, Relaying the Connectionless-Mode NetworkService between CSMA/CD LAN Subnetworks and FDDILAN Subnetworks First Edition

IEC ISP 10613-6 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 6: Definition of Profile RA51.54, Relaying theConnectionless-Mode Network Service between CSMA/CDLAN Subnetworks and FDDI LAN Subnetworks Amendment1: Addition of Systems Management Requirements1996 ***CD-ROM ONLY***

IEC ISP 10613-7 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 7: PSDN Subnetwork-Dependent, Media-Dependent Requirements for VirtualCalls over a Permanent Access First Edition

IEC ISP 10613-7 DRAFT AMD 2 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 7: PSDN


Subnetwork-Dependent, Media-Dependent Requirementsfor Virtual Calls over a Permanent Access Amendment2: Reference Optional Security RequirementsSpecific to X.25 Subnetworks - RAnn.11n1 1996 ***CD-ROM ONLY***

IEC ISP 10613-8 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 8: Definition of ProfileRA51.1111, Relaying the Connectionless-Mode NetworkService between CSMA/CD LAN Subnetworks and PSDNsUsing Virtual Calls over a PSTN Leased LinePermanent Access First Edition

IEC ISP 10613-8 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 8: Definition of Profile RA51.1111, Relaying theConnectionless-Mode Network Service between CSMA/CDLAN Subnetworks and PSDNs Using Virtual Calls overPSTN Leased Line Permanent Access Amendment 1: Addition of Management Requirements 1996 ***CD-ROMONLY***

IEC ISP 10613-9 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 9: Definition of ProfileRA51.1121, Relaying the Connectionless-Mode NetworkService between CSMA/CD LAN Subnetworks and PSDNsUsing Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition

IEC ISP 10613-9 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 9: Definition of Profile RA51.1121, Relaying theConnectionless-Mode Network Service between CSMA/CDLAN Subnetworks and PSDNs Using Virtual Calls overa Digital Data Circuit/CSDN Leased Line PermanentAccess Amendment 1: Addition of ManagementRequirements 1996 ***CD-ROM ONLY***

IEC ISP 10613-10 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 10: Token Ring LANSubnetwork-Dependent, Media-Dependent RequirementsFirst Edition

IEC ISP 10613-11 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 11: Definition of ProfileRA51.53, Relaying the Connectionless-Mode NetworkService between CSMA/CD LAN Subnetworks and TokenRing LAN Subnetworks First Edition

IEC ISP 10613-11 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 11: Definition of Profile RA51.53, Relaying theConnectionless-Mode Network Service between CSMA/CDLAN Subnetworks and Token Ring LAN SubnetworksAmendment 1: Addition of Management Requirements1996 ***CD-ROM ONLY***

IEC ISP 10613-12 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Services - Part 12: Definition of ProfileRA53.53, Relaying the Connectionless-Mode NetworkService between Token Ring LAN Subnetworks FirstEdition

IEC ISP 10613-12 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 12:


Definition of Profile RA53.53, Relaying theConnectionless-Mode Network Service between TokenRing LAN Subnetworks Amendment 1: Addition ofManagement Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10613-13 Information Technology - InternationalStandardization Profile RA - Relaying theConnectionless-Mode Network Service - Part 13: Definition of Profile RA53.54, Relaying theConnectionless-Mode Network Service between TokenRing LAN Subnetworks and FDDI LAN Subnetworks FirstEdition

IEC ISP 10613-13 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 13: Definition of Profile RA53.54, Relaying theConnectionless-Mode Network Service between TokenRing LAN Subnetworks and FDDI LAN SubnetworksAmendment 1: Addition of Systems ManagementRequirements 1996 ***CD-ROM ONLY***

IEC ISP 10613-14 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 14: Definition of ProfileRA54.54, Relaying the Connectionless-Mode NetworkService between FDDI LAN Subnetworks First Edition

IEC ISP 10613-14 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 14: Definition of Profile RA54.54, Relaying theConnectionless-Mode Network Service between FDDILAN Subnetworks Amendment 1: Addition of SystemsManagement Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10613-15 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 15: Definition of ProfileRA53.1111, Relaying the Connectionless-Mode NetworkService between Token Ring LAN Subnetworks andPSDNs Using Virtual Calls Over PSTN Leased LinePermanent Access First Edition

IEC ISP 10613-15 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 15: Definition of Profile RA53.1111, Relaying theConnectionless-Mode Network Service between TokenRing LAN Subnetworks and PSDNs Using Virtual Callsover a PSTN Leased Line Permanent Access Amendment1: Addition of Management Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10613-16 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 16: Definition of ProfileRA53.1121, Relaying the Connectionless-Mode NetworkService between Token Ring LAN Subnetworks andPSDNs Using Virtual Calls over a Digital DataCircuit/CSDN Leased Line Permanent Access FirstEdition

IEC ISP 10613-16 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 16: Definition of Profile RA53.1121, Relaying theConnectionless-Mode Network Service between TokenRing LAN Subnetworks and PSDNs Using Virtual Callsover a Digital Data Circuit/CSDN Leased LinePermanent Access Amendment 1: Addition ofManagement Requirements 1996 ***CD-ROM***

IEC ISP 10613-17 Information Technology - International Standardized


Profile RA - Relaying the Connectionless-ModeNetwork Service - Part 17: Definition of ProfileRA54.1111, Relaying the Connectionless-Mode NetworkService between FDDI LAN Subnetworks and PSDNsUsing Virtual Calls over a PSTN Leased LinePermanent Access First Edition

IEC ISP 10613-17 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 17: Definition of Profile RA54.1111, Relaying theConnectionless-Mode Network Service between FDDILAN Subnetworks and PSDNs Using Virtual Calls overa PSTN Leased Line Permanent Access Amendment 1: Addition of Systems Management Requirements 1996 ***CD-ROM ONLY***

IEC ISP 10613-18 Information Technology - International StandardizedProfile RA - Relaying the Connectionless-ModeNetwork Service - Part 18: Definition of ProfileRA54.1121, Relaying the Connectionless-Mode NetworkService between FDDI LAN Subnetworks and PSDNsUsing Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition

IEC ISP 10613-18 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RA - Relayingthe Connectionless-Mode Network Service - Part 18: Definition of Profile RA54.1121, Relaying theConnectionless-Mode Network Service between FDDILAN Subnetworks and PSDNs Using Virtual Calls overa Digital Data Circuit/CSDN Leased Line PermanentAccess Amendment 1: Addition of Systems ManagementRequirements 1996 ***CD-ROM ONLY***

IEC DISP 10613-19 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 19: Security Employing the Network Layer SecurityProtocol - Connectionless-Mode, for RAnn.nnProfiles ***CD-ROM ONLY***

IEC DISP 10613- 20 (DRAFT) Information Technology - InternationalStandardized Profile RA - Relaying theConnectionless-Mode Network Service - Part 20: Security Employing the Network Layer SecurityProtocol - Connectionless-Mode, with SDT-PDU BasedProtection over X.25 Packet Switched Data NetworksUsing Virtual Calls, RA1111/RA1121 Profiles ***CD-ROM ONLY***

IEC ISP 10614-1 Information Technology - International StandardizedProfile RC - X.25 Protocol Relaying - Part 1: Subnetwork-Independent Requirements First Edition

IEC ISP 10614-2 Information Technology - International StandardizedProfile RC - X.25 Protocol Relaying - Part 2: LANSubnetwork-Dependent, Media-IndependentRequirements First Edition

IEC ISP 10614-3 Information Technology - International StandardizedProfile RC - X.25 Protocol Relaying - Part 3: CSMA/CD LAN Subnetwork-Dependent, Media-DependentRequirements First Edition

IEC ISP 10614-4 Information Technology - International StandardizedProfile RC - X.25 Protocol Relaying - Part 4: PSDNSubnetwork-Dependent, Media-Dependent Requirementsfor Virtual Calls over a Permanent Access FirstEdition

IEC ISP 10614-5 Information Technology - International StandardizedProfile RC - X.25 Protocol Relaying - Part 5: Definition of Profile RC51.1111, X.25 ProtocolRelaying between CSMA/CD LAN Subnetworks and PSDNs


Using Virtual Calls over a PSTN Leased LinePermanent Access First Edition

IEC DISP 10614-5 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RC - X.25Protocol Relaying - Part 5: Definition of ProfileRC51.1111, X.25 Protocol Relaying between CSMA/CDLAN Subnetworks and PSDNs Using Virtual Calls overa PSTN Leased Line Permanent Access Amendment 1: Addition of Management Requirements ***CD-ROMONLY***; 1998

IEC ISP 10614-6 Information Technology - International StandardizedProfile RC - X.25 Protocol Relaying - Part 6: Definition of Profile RC51.1121, X.25 ProtocolRelaying between CSMA/CD LAN Subnetworks and PSDNsUsing Virtual Calls over a Digital Data Circuit/CSDN Leased Line Permanent Access First Edition

IEC DISP 10614-6 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RC - X.25Protocol Relaying - Part 6: Definition of ProfileRC51.1121, X.25 Protocol Relaying between CSMA/CDLAN Subnetworks and PSDNs Using Virtual Calls overa Digital Data Circuit/CSDN Leased Line PermanentAccess Amendment 1: Addition of ManagementRequirements ***CD-ROM ONLY***; 1998

IEC ISP 10615-3 Information Technology - International StandardizedProfiles ADInn - OSI Directory - Part 3: ADI21 - DSA Performer Role First Edition

IEC ISP 10615-4 Information Technology - International StandardizedProfiles ADInn - OSI Directory - Part 4: ADI22 - DSA Invoker Role First Edition

IEC DISP 10615-5 (DRAFT) Information Technology - InternationalStandardized Profiles ADInn - The Directory - Part5: ADI31-DUA Support of Distributed Operations ***CD-ROM ONLY***

IEC DISP 10615-6 (DRAFT) Information Technology - InternationalStandardized Profiles ADInn - The Directory - Part6: ADI32 - DSA Support of Distributed Operations ***CD-ROM ONLY***

IEC ISP 10616 Information Technology - International StandardizedProfile FDI11 - Directory Data Definitions - CommonDirectory Use (Normal) First Edition

IEC 10641 Information Technology - Computer Graphics andImage Processing - Conformance Testing ofImplementations of Graphics Standards First Edition

IEC 10646-1 Information Technology - Universal Multiple-OctetCoded Character Set (UCS) - Part 1: Architectureand Basic Multilingual Plane First Edition; Corrigendum 1-1996; Amendment 1-1996; Amendment2-1996; Amendment 3-1996; Amendment 4-1996; Amendment 6-1997; Amendment 7-1997; Amendment8-1997; Amendment 9-1997

IEC 10646-1 DRAFT AMD 5 (DRAFT) Information Technology - UniversalMultiple-Octet Coded Character Set (UCS) - Part 1: Architecture and Basic Multilingual Plane Amendment5 1996 ***CD-ROM ONLY***

IEC 10646-1 FDAM 10 (DRAFT) Information Technology - UniversalMultiple-Octet Coded Character Set (UCS) - Part 1: Architecture and Basic Multilingual Plane Amendment10: Ethiopic ***CD-ROM ONLY***; 1998

IEC 10646-1 FDAM 11 (DRAFT) Information Technology - UniversalMultiple-Octet Coded Character Set (UCS) - Part 1: Architecture and Basic Multilingual Plane Amendment11: Unified Canadian Aboriginal Syllabics ***CD-ROMONLY***; 1998

IEC 10646-1 FDAM 12 (DRAFT) Information Technology - Universal


Multiple-Octet Coded Character Set (UCS) - Part 1: Architecture and Basic Multilingual Plane Amendment12: Cherokee ***CD-ROM ONLY***; 1998

IEC 10728 Information Technology - Information ResourceDictionary System (IRDS) Services Interface FirstEdition; Amendment 1-1995; Amendment 2-1996; Amendment 3-1996

IEC 10728 DRAFT AMD 4 (DRAFT) Information Technology - InformationResource Dictionary System (IRDS) ServicesInterface Amendment 4: RPC IDL Binding 1997; ***CD-ROM ONLY***

IEC 10729-1 Information Technology - Open SystemsInterconnection - Conformance Test Suite for thePresentation Layer - Part 1: Test Suite Structureand Test Purposes for the Presentation ProtocolFirst Edition (AS/NZS 4222.1: 1994)

IEC 10729-2 Information Technology - Open SystemsInterconnection - Conformance Test Suite for thePresentation Layer - Part 2: Test Suite Structureand Test Purposes for the ASN.1 Basic EncodingsFirst Edition

IEC TR 10730 Information Technology - Open SystemsInterconnection - Tutorial on Naming and AddressingFirst Edition; SAA/SNZ HB68: 1995

IEC 10731 Information Technology - Open SystemsInterconnection - Basic Reference Model - Conventions for the Definition of OSI ServicesFirst Edition

IEC 10732 Information Technology - Use of X.25 Packet LayerProtocol to Provide the OSI Connection-Mode NetworkService over the Telephone Network First Edition; (CCITT RECMN X.614)

IEC 10733 Information Technology - Telecommunications andInformation Exchange Between Systems - Elements ofManagement Information Related to OSI Network LayerStandards First Edition; Amendment 1-1996; Corrigendum 1-1994; Corrigendum 2-1996; Corrigendum3-1997

IEC TR 10735 Information Technology - Telecommunications andInformation Exchange between Systems - StandardGroup MAC Addresses First Edition; AS/NZS 4228: 1994

IEC 10736 Information Technology - Telecommunications andInformation Exchange Between Systems - TransportLayer Security Protocol First Edition

IEC DIS 10736 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunications and Information Exchangebetween Systems - Transport Layer Security ProtocolAmendment 1: Security Association Establishment1993 ***CD-ROM ONLY***

IEC 10737 Information Technology - Telecommunications andInformation Exchange Between Systems - Elements ofManagement Information Related to OSI TransportLayer Standards First Edition; Amendment 1-1994; Amendment 2-1996; Corrigendum 1-1997

IEC DIS 10737-1 (DRAFT) Information Technology - Telecommunicationsand Information Exchange Between Systems - Elementsof Management Information Related to OSI TransportLayer Standards - Part 1: Transport ProtocolsManagement Specifications ***CD-ROM ONLY***

IEC TR 10738 Information Technology - Local and MetropolitanArea Networks - Token Ring Access Method andPhysical Layer Spec. - Recommended Practice for Useof Unshielded Twisted Pair Cable (UTP) for TokenRing Data Trans. at 4 Mbit/s First Ed.(Withdrawn)(


Replaced by ISO/IEC 8802-5) IEC 10739-1 Information Technology - Open Systems

Interconnection - Conformance Test Suite for ISO9041-1 - Virtual Terminal Basic Class Protocol - Part 1: Test Suite Structure and Test PurposesFirst Edition

IEC 10740-1 Information Technology - Text and Office Systems - Referenced Data Transfer - Part 1: AbstractService Definition First Edition; AS/NZS 4221.1: 1994

IEC 10740-2 Information Technology - Text and Office Systems - Referenced Data Transfer - Part 2: ProtocolSpecification First Edition; AS/NZS 4221.2: 1994

IEC 10741-1 Information Technology - User System Interfaces - Dialogue Interaction - Part 1: Cursor Control forText Editing First Edition; Amendment 1 - 12/15/1996

IEC DIS 10741-1.2 (DRAFT) Information Technology - User SystemInterfaces - Dialogue Interaction - Part 1: CursorControl for Text Editing ***CD-ROM ONLY***

IEC 10742 Information Technology - Telecommunications andInformation Exchange Between Systems - Elements ofManagement Information Related to OSI Data LinkLayer Standards First Edition; Amendment1-11/15/1995; Amendment 2-07/15/1996; Amendment3-12/15/1996

IEC DIS 10743 (DRAFT) Information Technology - Standard MusicDescription Language (SMDL) ***CD-ROM ONLY***

IEC 10744 Information Technology - Hypermedia/Time-BasedStructuring Language (HyTime) Second Edition

IEC 10745 Information Technology - Open SystemsInterconnection - Upper Layers Security Model FirstEdition

IEC DIS 10746-1 (DRAFT) Information Technology - Basic ReferenceModel of Open Distributed Processing - Part 1: Overview ***CD-ROM ONLY***

IEC 10746-2 Information Technology - Open DistributedProcessing - Reference Model: Foundations FirstEdition

IEC 10746-3 Information Technology - Open DistributedProcessing - Reference Model: Architecture FirstEdition

IEC DIS 10746-4 (DRAFT) Information Technology - Basic ReferenceModel of Open Distributed Processing - Part 4: Architectural Semantics ***CD-ROM ONLY***

IEC DIS 10746-4 .2 (DRAFT) Information Technology - Basic ReferenceModel of Open Distributed Processing - Part 4: Architectural Semantics ***CD-ROM ONLY***

IEC 10747 Information Technology - Telecommunications andInformation Exchange between Systems - Protocol forExchange of Inter-Domain Routeing Information AmongIntermediate Systems to Support Forwarding of ISO8473 PDUs First Edition; Amendment 1-1996; Corrigendum 1-1996

IEC 10857 Information Technology - Microprocessor Systems - Futurebus+ - Logical Protocol Specification FirstEdition; (ANSI/IEEE 896.1)

IEC DIS 10857.2 (DRAFT) Information Technology - MicroprocessorSystems - Futurebus+ - Logical ProtocolSpecification ***CD-ROM ONLY***

IEC 10859 Information Technology - 8-Bit BackplaneInterface: STEbus and Mechanical CoreSpecifications for Microcomputers First Edition

IEC DIS 10860.2 (DRAFT) Information Technology - Simple 32-Bit


Backplane Bus: NuBus ***CD-ROM ONLY*** IEC 10861 Information Technology - Microprocessor Systems

- High-Performance Synchronous 32-Bit Bus: MULTIBUSII First Edition; (ANSI/IEEE 1296)

IEC 10885 Information Technology - 356 mm Optical DiskCartridge for Information Interchange - Write OnceFirst Edition

IEC 10918-1 Information Technology - Digital Compression andCoding of Continuous-Tone Still Images: Requirements and Guidelines First Edition

IEC 10918-2 Information Technology - Digital Compression andCoding of Continuous-Tone Still Images: ComplianceTesting First Edition

IEC 10918-3 Information Technology - Digital Compression andCoding of Continuous-Tone Still Images: ExtensionsFirst Edition

IEC DIS 10918-4 (DRAFT) Information Technology - DigitalCompression and Coding of Continuous-Tone StillImages - Part 4: Registration Procedures for JPEGProfile, APPn Marker, and SPIFF Profile ID Marker ***CD-ROM ONLY***

IEC DIS 10918-4.2 (DRAFT) Information Technology - DigitalCompression and Coding of Continuous-Tone StillImages: Registration of JPEG Profiles, SPIFFProfiles, SPIFF Tags, SPIFF Colour Spaces, APPNMarkers, SPIFF Compression Types and RegistrationAuthorities (REGAUT) ***CD-ROM ONLY***

IEC 10967-1 Information Technology - Language IndependentArithmetric - Part 1: Integer and Floating PointArithmetic First Edition

IEC 10994 Information Technology - Data Interchange on 90 mmFlexible Disk Cartridges Using Modified FrequencyModulation Recording at 31 831 ftprad on 80 Trackson Each Side - ISO Type 303 First Edition

IEC TR 11017 Information Technology - Framework forInternationalization First Edition

IEC 11072 Information Technology - Computer Graphics - Computer Graphics Reference Model First Edition

IEC 11159 Information Technology - Office Equipment - MinimumInformation to Be Included in Specification Sheets - Copying Machines Second Edition; Corrected andReprinted 03/01/1997

IEC 11160-1 Information Technology - Office Equipment - MinimumInformation to Be Included in Specification Sheets - Printers - Part 1: Class 1 and Class 2 PrintersFirst Edition

IEC 11160-2 Information Technology - Office Equipment - MinimumInformation to Be Included in Specification Sheets - Printers - Part 2: Class 3 and Class 4 PrintersFirst Edition

IEC DIS 11160.2 (DRAFT) Information Technology - Office Equipment - Minimum Information to Be Included inSpecification Sheets - Printing Machines ***CD-ROMONLY***

IEC DIS 11160.3 (DRAFT) Information Technology - Office Equipment - Minimum Information to Be Included inSpecification Sheets - Printing Machines ***CD-ROMONLY***

IEC DIS 11172 (DRAFT) Information Technology - Coding of MovingPictures and Associated Audio for Digital StorageMedia up to About 1,5 Mbit/s ***CD-ROM ONLY***

IEC 11172-1 Information Technology - Coding of Moving Picturesand Associated Audio for Digital Storage Media atup to About 1,5 Mbit/s - Part 1: Systems First


Edition; CEN EN ISO/IEC 11172-1: 1995; AS/NZS4230.1: 1994; Corrigendum 1-1996

IEC 11172-2 Information Technology - Coding of Moving Picturesand Associated Audio for Digital Storage Media atup to About 1,5 Mbit/s - Part 2: Video FirstEdition; AS/NZS 4230.2: 1994; CENELEC EN 11172-2: 1995; Corrigendum 1-1996

IEC 11172-3 Information Technology - Coding of Moving Picturesand Associated Audio for Digital Storage Media atup to About 1,5 Mbit/s - Part 3: Audio FirstEdition; CEN EN ISO/IEC 11172-3 1995; AS/NZS4230.3: 1994; Corrigendum 1-1996

IEC 11172-4 Information Technology - Coding of Moving Picturesand Associated Audio for Digital Storage Media atup to About 1,5 Mbit/s - Part 4: Compliance TestingFirst Edition

IEC 11179-3 Information Technology - Specification andStandardization of Data Elements - Part 3: BasicAttributes of Data Elements First Edition

IEC 11179-4 Information Technology - Specification andStandardization of Data Elements - Part 4: Rulesand Guidelines for the Formulation of DataDefinitions First Edition

IEC 11179-5 Information Technology - Specification andStandardization of Data Elements - Part 5: Namingand Identification Principles for Data ElementsFirst Edition

IEC 11179-6 Information Technology - Specification andStandardization of Data Elements - Part 6: Registration of Data Elements First Edition

IEC ISP 11181-1 Information Technology - International StandardizedProfile FOD26 - Open Document Format: EnhancedDocument Structure - Character, Raster Graphics andGeometric Graphics Content Architectures - Part 1: Document Application Profile (DAP) First Edition

IEC DISP 11181-2 (DRAFT) Information Technology - InternationalStandardized Profile FOD26 - Office DocumentFormat: Enhanced Document Structure - Character, Raster Graphics and Geometric Graphics ContentArchitectures - Part 2: Implementation SupportRequirements ***CD-ROM ONLY***

IEC DISP 11181-3 (DRAFT) Information Technology - InternationalStandardized Profile FOD26 - Office DocumentFormat: Enhanced Document Structure - Character, Raster Graphics and Geometric Graphics ContentArchitectures - Part 3: Abstract Test Suite (ATS) ***CD-ROM ONLY***

IEC ISP 11182-1 Information Technology - International StandardizedProfile FOD36 - Open Document Format: ExtendedDocument Structure - Character, Raster Graphics andGeometric Graphics Content Architectures - Part 1: Document Application Profile (DAP) First Edition; Technical Corrigendum 1-1998

IEC ISP 11183-1 Information Technology - International StandardizedProfiles AOM1n OSI Management - ManagementCommunications - Part 1: Specification of ACSE, Presentation and Session Protocols for the Use byROSE and CMISE First Edition; AS/NZS 4248.1: 1994

IEC ISP 11183-2 Information Technology - International StandardizedProfiles AOM1n OSI Management - ManagementCommunications - Part 2: CMISE/ROSE for AOM12 - Enhanced Management Communications FirstEdition; EN ISP 11183-2: 1994; AS/NZS 4248.2: 1994

IEC ISP 11183-3 Information Technology - International StandardizedProfiles AOM1n OSI Management - Management


Communications - Part 3: CMISE/ROSE for AOM11 - Basic Management Communications First Edition; Corrected and Reprinted - 1993; EN ISP 11183-3: 1994; AS/NZS 4248.3: 1994

IEC ISP 11184-1 Information Technology - International StandardizedProfiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part 1: FVT121, FVT122 - S-Mode Forms and Paged VTE-Profiles FirstEdition

IEC ISP 11184-2 Information Technology - International StandardizedProfiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part 2: FVT115 - A-Mode Generalized Telnet VTE-Profile First Edition

IEC ISP 11184-3 Information Technology - International StandardizedProfiles FVT1nn - Virtual Terminal Basic Class - Register of VTE-Profiles - Part 3: FVT114 - A-Mode Transparent VTE-Profile

IEC ISP 11185-1 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 1: FVT211, FVT212 - Sequenced andUnsequenced Application Control Objects FirstEdition; CEN EN ISP 11185-1: 1995

IEC ISP 11185-2 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 2: FVT213, FVT214 - Sequenced andUnsequenced Terminal Control Objects FirstEdition; CEN EN ISP 11185-2: 1995

IEC ISP 11185-3 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 3: FVT215, FVT216 - Application RIO RecordLoading Control Object, Terminal RIO RecordNotification Control Object First Edition

IEC ISP 11185-4 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 4: FVT217 - Horizontal Tabulation ControlObject First Edition; CEN EN ISP 11185-4: 1995

IEC ISP 11185-5 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 5: FVT218 - Logical Image Control ObjectFirst Edition; CEN EN ISP 11185-5: 1995

IEC ISP 11185-6 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 6: FVT219 - Status Message Control ObjectFirst Edition; CEN EN ISP 11185-6: 1995

IEC ISP 11185-7 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 7: FVT2110 - Entry-Control Control ObjectFirst Edition; CEN EN ISP 11185-7: 1995

IEC ISP 11185-8 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 8: FVT221 - Forms FEICO (Field EntryInstruction Control Object) No. 1 First Edition; CEN EN ISP 11185-8: 1995

IEC ISP 11185-9 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 9: FVT222 - Paged FEICO (Field Entry


Instruction Control Object) No. 1 First Edition (CEN EN ISP 11185-9: 1995)

IEC ISP 11185-10 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 10: FVT231 - Forms FEPCO (Field Entry PilotControl Object) No. 1 First Edition; CEN EN ISP11185-10: 1995

IEC ISP 11185-11 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 11: FVT232 - Paged FEPCO (Field Entry PilotControl Object) No. 1 First Edition; CEN EN ISP11185-11: 1995

IEC ISP 11185-12 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions Part12: FVT2116 - Generalized Telnet Synch ControlObject; FVT2117 - Generalized Telnet Signal ControlObject; FVT2118 - Generalized Telnet NegotiationControl Object; FVT2119 - Generalized TelnetSubnegotiation Control Object First Edition

IEC ISP 11185-13 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 13: FVT2111 - Waiting Time Control ObjectFirst Edition

IEC ISP 11185-14 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 14: FVT2112 - Printer Control Object FirstEdition

IEC ISP 11185-15 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 15: FVT2113 - Field Definition ManagementControl Object First Edition

IEC ISP 11185-16 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 16: FVT2114 - Terminal Signal Titles ControlObject First Edition

IEC ISP 11185-17 Information Technology - International StandardizedProfiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 17: FVT2115 - Help Text Control Object FirstEdition

IEC ISP 11186-1 Information Technology - International StandardizedProfiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute Assignment TypeDefinitions - Part 1: FVT321 - Font Assignment TypeNo. 1 First Edition

IEC ISP 11186-2 Information Technology - International StandardizedProfiles FVT3nn - Virtual Terminal Basic Class - Register of Attribute Assignment TypeDefinitions - Part 2: FVT311 - RepertoireAssignment Type for ISO/IEC 10646 First Edition

IEC DISP 11186-3 (DRAFT) Information Technology - InternationalStandardized Profiles FVT3nn - Virtual TerminalBasic Class - Register of Attribute Assignment TypeDefinitions - Part 3: FVT312 - RepertoireAssignment Type for ISO/IEC 2022 Level 2 ***CD-ROMONLY***

IEC ISP 11186-4 Information Technology - International StandardizedProfiles FVT3nn - Virtual Terminal Basic Class


- Register of Attribute Assignment TypeDefinitions - Part 4: FVT322 - Font Assignment TypeNo. 2 First Edition

IEC ISP 11187-1 Information Technology - International StandardizedProfiles AVT1n, AVT2n - Virtual Terminal BasicClass - Application Profiles - Part 1: Common VTProtocol Requirements First Edition

IEC ISP 11187-2 Information Technology - International StandardizedProfiles AVT1n, AVT2n - Virtual Terminal BasicClass - Application Profiles - Part 2: CommonSupporting Layers Requirements First Edition

IEC ISP 11187-3 Information Technology - International StandardizedProfiles AVT1n, AVT2n - Virtual Terminal BasicClass - Application Profiles - Part 3: AVT22 - S-Mode Forms Application Profile First Edition

IEC ISP 11187-4 Information Technology - International StandardizedProfiles AVT1n, AVT2n - Virtual Terminal BasicClass - Application Profiles - Part 4: AVT23 - S-Mode Paged Application Profile First Edition

IEC ISP 11187-5 Information Technology - International StandardizedProfiles AVT1n, AVT2n - Virtual Terminal BasicClass - Application Profiles - Part 5: AVT16 - A-Mode Generalized Telnet Application Profile FirstEdition

IEC ISP 11187-6 Information Technology - International StandardizedProfiles AVT1n, AVT2n - Virtual Terminal BasicClass - Application Profiles - Part 6: AVT15 - A-Mode Transparent Application Profile First Edition

IEC ISP 11188-1 Information Technology - International StandardizedProfile - Common Upper Layer Requirements - Part1: Basic Connection Oriented Requirements FirstEdition

IEC ISP 11188-2 Information Technology - International StandardizedProfile - Common Upper Layer Requirements - Part2: Basic Connection Oriented Requirements for ROSE-Based Profiles First Edition

IEC ISP 11188-3 Information Technology - International StandardizedProfile - Common Upper Layer Requirements - Part3: Minimal OSI Upper Layer Facilities First Edition

IEC ISP 11189 Information Technology - International StandardizedProfile FD12 - Directory Data Definitions - MHS Useof the Directory First Edition

IEC ISP 11190 Information Technology - International StandardizedProfile FDI3 - Directory Data Definitions - FTAMUse of the Directory First Edition; CEN EN ISO/IECISP 11190: 1996

IEC 11319 Information Technology - 8 mm Wide Magnetic TapeCartridge for Information Interchange - HelicalScan Recording First Edition

IEC 11321 Information Technology - 3,81 mm Wide Magnetic TapeCartridge for Information Interchange - HelicalScan Recording - DATA/DAT Format First Edition

IEC 11404 Information Technology - Programming Languages, Their Environments and System Software Interfaces - Language-Independent Datatypes First Edition

IEC 11411 Information Technology - Representation for HumanCommunication of State Transition of Software FirstEdition

IEC 11430 Information Technology - Programming Languages - Generic Package of Elementary Functions for AdaFirst Edition

IEC 11458 Information Technology - Microprocessor Systems - VICbus - Inter-Crate Cable Bus First Edition

IEC 11518-1 Information Technology - High-Performance Parallel


Interface - Part 1: Mechanical, Electrical andSignalling Protocol Specification (HIPPI-PH) FirstEdition

IEC 11518-2 Information Technology - High-Performance ParallelInterface - Part 2: Framing Protocol (HIPPI-FP) First Edition

IEC 11518-3 Information Technology - High-Performance ParallelInterface - Part 3: Encapsulation of ISO/IEC8802-2 (IEEE Std 802.2) Logical Link ControlProtocol Data Units (HIPPI-LE) First Edition

IEC 11518-6 Information Technology - High-Performance ParallelInterface - Part 6: Physical Switch Control (HIPPI-SC) First Edition

IEC 11544 Information Technology - Coded Representation ofPicture and Audio Information - Progressive Bi-Level Image Compression First Edition; CEN EN ISO/IEC 11544 : 1995; Corrigendum 1-1995

IEC 11557 Information Technology - 3,81 mm Wide Magnetic TapeCartridge for Information Interchange - HelicalScan Recording - DDS-DC Format Using 60 m and 90 mLength Tapes First Edition

IEC 11558 Information Technology - Data Compression forInformation Interchange - Adaptive Coding withEmbedded Dictionary - DCLZ Algorithm First Edition

IEC 11559 Information Technology - Data Interchange on 12,7mm Wide 18-Track Magnetic Tape Cartridges - Extended Format First Edition

IEC 11560 Information Technology - Information Interchange on130 mm Optical Disk Cartridges Using the Magneto-Optical Effect, for Write Once, Read MultipleFunctionality First Edition

IEC 11569 Information Technology - Telecommunications andInformation Exchange Between Systems - 26-PoleInterface Connector Mateability Dimensions andContact Number Assignments First Edition; AS/NZS4244: 1994

IEC 11570 Information Technology - Telecommunications andInformation Exchange Between Systems - Open SystemsInterconnection - Transport Protocol IdentificationMechanism First Edition; AS/NZS 4245: 1994

IEC 11571 Information Technology - Telecommunications andInformation Exchange Between Systems - Numberingand Sub-Addressing in Private Integrated ServicesNetworks First Edition; AS/NZS 4134: 1995

IEC DIS 11571 (DRAFT) Information Technology - Private IntegratedServices Networks - Addressing ***CD-ROM ONLY***

IEC DIS 11572 (DRAFT) Information Technology - Telecommunicationsand Information Exchange Between Systems - PrivateIntegrated Services Network - Circuit Mode BearerServices - Inter- Exchange Signalling Proceduresand Protocol ***CD-ROM ONLY***

IEC 11572 Information Technology - Telecommunications andInformation Exchange Between Systems - PrivateIntegrated Services Network - Circuit Mode BearerServices - Inter-Exchange Signalling Procedures andProtocol Second Edition; Amendment 1-1997; Amendment 2-1997

IEC 11573 Information Technology - Telecommunications andInformation Exchange Between Systems - Synchronization Methods and TechnicalRequirements for Private Integrated ServicesNetworks First Edition; AS/NZS 4138: 1995

IEC 11574 Information Technology - Telecommunications andInformation Exchange Between Systems - PrivateIntegrated Services Network - Circuit-Mode 64


kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows FirstEdition; Amendment 1-1997

IEC 11575 Information Technology - Telecommunications andInformation Exchange Between Systems - ProtocolMappings for the OSI Data Link Service FirstEdition

IEC 11576 Information Technology - Procedure for theRegistration of Algorithms for the LosslessCompression of Data First Edition

IEC 11577 Information Technology - Open SystemsInterconnection - Network Layer Security ProtocolFirst Edition

IEC 11578 Information Technology - Open SystemsInterconnection - Remote Procedure Call (RPC) FirstEdition

IEC DIS 11578.2 (DRAFT) Information Technology - Open SystemsInterconnection - Remote Procedure Call (Incorporates Parts 1, 2, 3 and 4) (Replaces DIS11578 PT 1 Thru PT 4) ***CD-ROM ONLY***

IEC DIS 11579 (DRAFT) Information Technology - Telecommunicationsand Information Exchange Between Systems - Reference Configuration for Private IntegratedServices Networking (PISN) Exchanges ***CD-ROMONLY***

IEC 11579-1 Information Technology - Telecommunications andInformation Exchange Between Systems - PrivateIntegrated Services Network - Part 1: ReferenceConfiguration for PISN Exchanges (PINX) FirstEdition; (ETSI ETS 300 475-1: 1995) (Corrigendum1-1996)

IEC DIS 11581-1 (DRAFT) Information Technology - User SystemInterfaces - Icon Symbols and Functions - Part 1: Icons - General ***CD-ROM ONLY***

IEC DIS 11581-2 (DRAFT) Information Technology - User SystemInterfaces - Icon Symbols and Functions - Part 2: Object Icons ***CD-ROM ONLY***

IEC DIS 11581-3 (DRAFT) Information Technology - User-SystemInterfaces and Symbols - Icon Symbols andFunctions - Part 3: Pointers ***CD-ROM ONLY***

IEC 11582 Information Technology - Telecommunications andInformation Exchange Between Systems - PrivateIntegrated Services Network - Generic FunctionalProtocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures andProtocols First Edition; (ETSI PRETS 300 239: 1995)

IEC 11584 Information Technology - Telecommunications andInformation Exchange Between Systems - PrivateIntegrated Services Network - Circuit-Mode Multi-Rate Bearer Services - Service Description, Functional Capabilities and Information Flows FirstEdition

IEC 11586-1 Information Technology - Open SystemsInterconnection - Generic Upper Layers Security: Overview, Models and Notation First Edition

IEC 11586-2 Information Technology - Open SystemsInterconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) ServiceDefinition First Edition

IEC 11586-3 Information Technology - Open SystemsInterconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) ProtocolSpecification First Edition

IEC 11586-4 Information Technology - Open SystemsInterconnection - Generic Upper Layers Security:


Protecting Transfer Syntax Specification FirstEdition

IEC 11586-5 Information Technology - Open SystemsInterconnection - Generic Upper Layers Security: Security Exchange Service Element (SESE) ProtocolImplementation Conformance Statement (PICS) Proforma First Edition

IEC 11586-6 Information Technology - Open SystemsInterconnection - Generic Upper Layers Security: Protecting Transfer Syntax Protocol ImplementationConformance Statement (PICS) Proforma First Edition

IEC 11587 Information Technology - Open SystemsInterconnection - Application Context for SystemsManagement with Transaction Processing FirstEdition

IEC 11588-1 Information Technology - Message Handling Systems (MHS) Management - Part 1: Model and ArchitectureFirst Edition

IEC 11588-3 Information Technology - Message Handling Systems (MHS) Management: Logging Information First Edition

IEC 11588-8 Information Technology - Message Handling Systems (MHS) Management: Message Transfer Agent ManagementFirst Edition

IEC TR 11589 Information Technology - Open SystemsInterconnection - LOTOS Description of the CCRService First Edition

IEC TR 11590 Information Technology - Open SystemsInterconnection - LOTOS Description of the CCRProtocol First Edition

IEC DIS 11685.2 (DRAFT) Information Technology - IEEE Trial-UseStandard Specifications for MicroprocessorOperating Systems Interfaces (MOSI) ***CD-ROMONLY***

IEC 11693 Identification Cards - Optical Memory Cards - General Characteristics First Edition

IEC 11694-1 Identification Cards - Optical Memory Cards - Linear Recording Method - Part 1: PhysicalCharacteristics First Edition

IEC 11694-2 Identification Cards - Optical Memory Cards - Linear Recording Method - Part 2: Dimensions andLocation of the Accessible Optical Area FirstEdition

IEC DIS 11694-2. 2 (DRAFT) Identification Cards - Optical MemoryCards - Linear Recording Method - Part 2: Dimensions and Location of the Accessible OpticalArea ***CD-ROM ONLY***

IEC 11694-3 Identification Cards - Optical Memory Cards - Linear Recording Method - Part 3: OpticalProperties and Characteristics First Edition

IEC DIS 11694-3. 2 (DRAFT) Identification Cards - Optical MemoryCards - Linear Recording Method - Part 3: OpticalProperties and Characteristics ***CD-ROM ONLY***

IEC 11694-4 Identification Cards - Optical Memory Cards - Linear Recording Method - Part 4: Logical DataStructures First Edition

IEC 11714-1 Design of Graphical Symbols for Use in theTechnical Documentation of Products - Part 1: BasicRules First Edition; Replaces ISO 3461-2

IEC 11729 Information Technology - Programming Languages - Generic Package of Primitive Functions for AdaFirst Edition

IEC 11730 Information Technology - Programming Languages - Form Interface Management System (FIMS) FirstEdition


IEC 11730 DRAFT AMD 1 (DRAFT) Information Technology - ProgrammingLanguages - Form Interface Management System (FIMS) Amendment 1: COBOL Call Binding; (1995) ***CD-ROM ONLY***

IEC TR 11735 Information Technology - EXTensions for Real-TimeAda First Edition

IEC 11756 Information Technology - Programming Languages - MUMPS First Edition

IEC DIS 11756 (DRAFT) Information Technology - ProgrammingLanguages - M ***CD-ROM ONLY***

IEC 11770-1 Information Technology - Security Techniques - KeyManagement - Part 1: Framework First Edition

IEC DIS 11770- 1.2 (DRAFT) Information Technology - SecurityTechniques - Key Management - Part 1: Framework ***CD-ROM ONLY***

IEC 11770-2 Information Technology - Security Techniques - KeyManagement - Part 2: Mechanisms Using SymmetricTechniques First Edition

IEC DIS 11770-3 (DRAFT) Information Technology - SecurityTechniques - Key Management - Part 3: MechanismsUsing Asymmetric Techniques ***CD-ROM ONLY***

IEC DIS 11770-3.2 (DRAFT) Information Technology - SecurityTechniques - Key Management - Part 3: MechanismsUsing Asymmetric Techniques ***CD-ROM ONLY***

IEC 11801 Information Technology - Generic Cabling forCustomer Premises First Edition; Corrected andReprinted - 07-15-1995; AS/NZS 3080: 1996; Technical Corrigendum 1-12/15/1996; TechnicalCorrigendum 2-06/15/1997

IEC 11801 DRAFT AMD 1 (DRAFT) Information Technology - Generic Cablingfor Customer Premises; Amendment 1 ***CD-ROMONLY***

IEC 11801 DRAFT AMD 2 (DRAFT) Information Technology - Generic Cablingfor Customer Premises - Amendment 2 1998;***CD-ROMONLY***

IEC TR 11802-1 Information Technology - Telecommunications andInformation Exchange between Systems - Local andMetropolitan Area Networks - Technical Reports andGuidelines - Part 1: The Structure and Coding ofLogical Link Control Addresses in Local AreaNetworks Second Edition

IEC TR 11802-2 Information Technology - Telecommunications andInformation Exchange between Systems - Local andMetropolitan Area Networks - Technical Reports andGuidelines - Part 2: Standard Group MAC AddressesThird Edition

IEC TR 11802-4 Information Technology - Telecommunications andInformation Exchange Between Systems - Local andMetropolitan Area Networks - Technical Reports andGuidelines - Part 4: Token Ring Access Method andPhysical Layer Specifications - Fibre Optic StationAttachment First Edition; (IEEE 802.5j)

IEC TR 11802-5 Information Technology - Telecommunications andInformation Exchange between Systems - Local andMetropolitan Area Networks - Technical Reports andGuidelines - Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area NetworksFirst Edition; ANSI/IEEE Std 802.1H

IEC 12042 Information Technology - Data Compression forInformation Interchange - Binary Arithmetic CodingAlgorithm First Edition

IEC ISP 12059-0 Information Technology - International StandardizedProfiles - OSI Management - Common Information forManagement Functions - Part 0: Common Definitions


for Management Function Profiles First Edition IEC ISP 12059-1 Information Technology - International Standardized

Profiles - OSI Management - Common Information forManagement Functions - Part 1: Object ManagementFirst Edition

IEC ISP 12059-2 Information Technology - International StandardizedProfiles - OSI Management - Common Information forManagement Functions - Part 2: State ManagementFirst Edition

IEC ISP 12059-3 Information Technology - International StandardizedProfiles - OSI Management - Common Information forManagement Functions - Part 3: Attributes forRepresenting Relationships First Edition

IEC ISP 12059-4 Information Technology - International StandardizedProfiles - OSI Management - Common Information forManagement Functions - Part 4: Alarm ReportingFirst Edition

IEC ISP 12059-5 Information Technology - International StandardizedProfiles - OSI Management - Common Information forManagement Functions - Part 5: Event ReportManagement First Edition

IEC ISP 12059-6 Information Technology - International StandardizedProfiles - OSI Management - Common Information forManagement Functions - Part 6: Log Control FirstEdition

IEC DISP 12059-7 (DRAFT) Information Technology - InternationalStandardized Profiles - OSI Management - CommonInformation for Management Functions - Part 7: Security Alarm Reporting ***CD-ROM ONLY***

IEC DISP 12059-8 (DRAFT) Information Technology - InternationalStandardized Profiles - OSI Management - CommonInformation for Management Functions - Part 8: Security Audit Trail ***CD-ROM ONLY***

IEC DISP 12059-9 (DRAFT) Information Technology - InternationalStandardized Profiles - OSI Management - CommonInformation for Management Functions - Part 9: Objects and Attributes for Access Control ***CD-ROMONLY***

IEC DISP 12059- 11 (DRAFT) Information Technology - InternationalStandardized Profiles - OSI Management - CommonInformation for Management Functions - Part 11: Metric Objects and Attributes ***CD-ROM ONLY***

IEC ISP 12059- 13 Information Technology - International StandardizedProfiles - OSI Management - Common Information forManagement Functions - Part 13: Summarization FirstEdition

IEC ISP 12060-1 Information Technology - International StandardizedProfiles OSI Management - Management Functions - Part 1: AOM211 - General Management CapabilitiesFirst Edition

IEC ISP 12060-2 Information Technology - International StandardizedProfiles OSI Management - Management Functions - Part 2: AOM212 - Alarm Reporting and StateManagement Capabilities First Edition

IEC ISP 12060-3 Information Technology - International StandardizedProfiles OSI Management - Management Functions - Part 3: AOM213 - Alarm Reporting CapabilitiesFirst Edition

IEC ISP 12060-4 Information Technology - International StandardizedProfiles OSI Management - Management Functions - Part 4: AOM221 - General Event Report ManagementFirst Edition

IEC ISP 12060-5 Information Technology - International StandardizedProfiles - OSI Management - Management Functions - Part 5: AOM231 - General Log Control First


Edition IEC DISP 12060-6 (DRAFT) Information Technology - International

Standardized Profiles - OSI Management - ManagementFunctions - Part 6: Security ManagementCapabilities (Including Profiles AOM2421, AOM2422and AOM2423) ***CD-ROM ONLY***

IEC DISP 12060-7 (DRAFT) Information Technology - InternationalStandardized Profiles - OSI Management - ManagementFunctions - Part 7: AOM252n - Metric Objects andAttributes ***CD-ROM ONLY***

IEC ISP 12060-8 Information Technology - International StandardizedProfiles - OSI Management - Management Functions - Part 8: AOM253X - Summarization Objects (Including Profiles AOM2531-AOM2539) First Edition

IEC DISP 12060-9 (DRAFT) Information Technology - InternationalStandardized Profiles - OSI Management - ManagementFunctions - Part 9: AOM2432n - Access Control ***CD-ROM ONLY***

IEC ISP 12061-1 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 1: Introduction to the TransactionProcessing Profiles First Edition

IEC ISP 12061-2 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 2: Support of OSI TP APDUs First Edition

IEC ISP 12061-3 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 3: Support of CCR APDUs First Edition

IEC ISP 12061-4 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 4: Support of Session, Presentation and ACSEPDUs First Edition

IEC ISP 12061-5 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 5: Application Supported Transactions - Polarized Control (ATP11) First Edition; CEN ENISP 12061-5: 1996

IEC ISP 12061-6 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 6: Application Supported Transactions - Shared Control (ATP12) First Edition; CEN EN ISP12061-6: 1996

IEC ISP 12061-7 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 7: Provider Supported UnchainedTransactions - Polarized Control (ATP21) FirstEdition; CEN EN ISP 12061-7: 1996

IEC ISP 12061-8 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 8: Provider Supported UnchainedTransactions - Shared Control (ATP22) FirstEdition; CEN EN ISP 12061-8: 1996

IEC ISP 12061-9 Information Technology - Open SystemsInterconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 9: Provider Supported Chained Transactions - Polarized Control (ATP31) First Edition; CEN EN


ISP 12061-9: 1996 IEC ISP 12061-10 Information Technology - Open Systems

Interconnection - International StandardizedProfiles: OSI Distributed Transaction Processing - Part 10: Provider Supported Chained Transactions - Shared Control (ATP32) First Edition; CEN EN ISP12061-10: 1996

IEC ISP 12062-1 Information Technology - International StandardizedProfiles AMH2n - Message Handling Systems - Interpersonal Messaging - Part 1: IPM MHS ServiceSupport First Edition; (CEN EN ISP 12 062-1: 1996) (Corrigendum 1-1996)

IEC DISP 12062-1 (DRAFT) Information Technology - InternationalStandardized Profiles AMH2n - Message HandlingSystems - Interpersonal Messaging - Part 1: IPM MHSService Support ***CD-ROM ONLY***

IEC ISP 12062-1 DRAFT AMD 1 (DRAFT) Information Technology - InternationalStandardized Profiles AMH2n - Message HandlingSystems - Interpersonal Messaging - Part 1: IPM MHSService Support; Amendment 1: Messaging StoreExtensions ***CD-ROM ONLY***

IEC DISP 12062-2 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH2n - Message Handling Systems - InterpersonalMessaging - Part 2: AMH21 - IPM Content ***CD-ROMONLY***

IEC ISP 12062-2 Information Technology - International StandardizedProfiles AMH2n - Message Handling Systems - Interpersonal Messaging - Part 2: AMH21 - IPMContent Second Edition

IEC DISP 12062-3 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH2n - Message Handling Systems - InterpersonalMessaging - Part 3: AMH22 - IPM Requirements forMessage Tranfer (P1) ***CD-ROM ONLY***

IEC ISP 12062-3 Information Technology - International StandardizedProfiles AMH2n - Message Handling Systems - Interpersonal Messaging - Part 3: AMH22 - IPMRequirements for Message Transfer (P1) SecondEdition

IEC DISP 12062-4 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH2n - Message Handling Systems - InterpersonalMessaging - Part 4: AMH23 and AMH25 - IPMRequirements for MTS Access (P3) ***CD-ROM ONLY***

IEC ISP 12062-4 Information Technology - International StandardizedProfiles AMH2n - Message Handling Systems - Interpersonal Messaging - Part 4: AMH23 andAMH25 - IPM Requirements for MTS Access (P3) SecondEdition

IEC DISP 12062-5 (WITHDRAWN) (DRAFT) Information Technology - International Standardized Profiles AMH2n - Message Handling Systems - InterpersonalMessaging - Part 5: AMH24 - IPM Requirements forEnhanced MS Access (P7) ***CD-ROM ONLY***

IEC ISP 12062-5 Information Technology - International StandardizedProfiles AMH2n - Message Handling Systems - Interpersonal Messaging - Part 5: AMH24 - IPMRequirements for Enhanced MS Access (P7) SecondEdition

IEC DISP 12062-6 (DRAFT) Information Technology - InternationalStandardized Profiles AMH2n - Message HandlingSystems - Interpersonal Messaging - Part 6: AMH 26 - IPM Requirements for Enhanced MS 94 Access (P7) ***CD-ROM ONLY***


IEC ISP 12063-1 Information Technology - International StandardizedProfiles AMH3n - Message Handling Systems - EDIMessaging - Part 1: EDIMG MHS Service Support FirstEdition; CEN EN ISP 12063-1: 1996

IEC ISP 12063-1 Information Technology - International StandardizedProfiles AMH3n - Message Handling Systems - EDIMessaging - Part 1: EDIMG MHS Service SupportSecond Edition

IEC ISP 12063-2 Information Technology - International StandardizedProfiles AMH3n - Message Handling Systems - EDIMessaging - Part 2: AMH31 - EDIMG Content SecondEdition

IEC ISP 12063-3 Information Technology - International StandardizedProfiles AMH3n - Message Handling Systems - EDIMessaging - Part 3: AMH32 - EDIMG Requirements forMessage Transfer (P1) Second Edition

IEC ISP 12063-4 Information Technology - International StandardizedProfiles AMH3n - Message Handling Systems - EDIMessaging - Part 4: AMH33 and AMH35 - EDIMGRequirements for MTS Access (P3) and MTS 94 Access (P3) Second Edition

IEC ISP 12063-5 Information Technology - International StandardizedProfiles AMH3n - Message Handling Systems - EDIMessaging - Part 5: AMH34 - EDIMG Requirements forEnhanced MS Access (P7) Second Edition

IEC ISP 12064-1 Information Technology - International StandardizedProfile FOD112 - Open Document Format: ImageApplications - Simple Document Structure - RasterGraphics Content Architecture - Part 1: DocumentApplication Profile (DAP) First Edition

IEC ISP 12067-1 Information Technology - International StandardizedProfile RB - Relaying the Connection-Mode NetworkService - Part 1: Subnetwork-IndependentRequirements First Edition

IEC ISP 12067-2 Information Technology - International StandardizedProfile RB - Relaying the Connection-Mode NetworkService - Part 2: LAN Subnetwork-Dependent Media-Independent Requirements First Edition

IEC ISP 12067-3 Information Technology - International StandardizedProfile RB - Relaying the Connection-Mode NetworkService - Part 3: PSDN Subnetwork-Dependent Media-Dependent Requirements for Vitual Calls over aPermanent Access First Edition

IEC ISP 12067-4 Information Technology - International StandardizedProfile RB - Relaying the Connection-Mode NetworkService - Part 4: Definition of Profile RB51.1111, Relaying the Connection-Mode Network ServiceBetween CSMA/CD LAN Subnetworks and PSDNs UsingVirtual Calls over a PSTN Leased Line PermanentAccess First Edition

IEC DISP 12067-4 DRAFT AMD 1 (DRAFT) Information Technology - International Standardized Profile RB - Relayingthe Connection-Mode Network Service - Part 4: Definition of Profile RB51.1111, Relaying theConnection-Mode Network Service between CSMA/CD LANSubnetworks and PSDNs Using Virtual Calls over aPSTN Leased Line Permanent Access Amendment 1: Addition of Management Requirements ***CD-ROMONLY***; 1998

IEC ISP 12067-5 Information Technology - International StandardizedProfile RB - Relaying the Connection-Mode NetworkService - Part 5: Definition of Profile RB51.1121, Relaying the Connection-Mode Network ServiceBetween CSMA/CD LAN Subnetworks and PSDNs UsingVirtual Calls over a Digital Data Circuit/CSDN


Leased Line Permanent Access First Edition IEC DISP 12067-5 DRAFT AMD 1 (DRAFT) Information Technology

- International Standardized Profile RB - Relayingthe Connection-Mode Network Service - Part 5: Definition of Profile RB51.1121, Relaying theConnection-Mode Network Service between CSMA/CD LANSubnetworks and PSDNs Using Virtual Calls over aDigital Data Circuit/CSDN Leased Line PermanentAccess Amendment 1: Addition of ManagementRequirements ***CD-ROM ONLY***; 1998

IEC ISP 12068-1 Information Technology - International StandardizedProfile FDI 4 - Directory Data Definitions - Use ofthe Directory for OSI TP - Part 1: FDI 41 - BasicNaming and Addressing First Edition

IEC ISP 12068-2 Information Technology - International StandardizedProfile FDI 4 - Directory Data Definitions - Use ofthe Directory for OSI TP - Part 2: FDI 42 - Enhanced Naming and Addressing First Edition

IEC ISP 12069-1 Information Technology - International StandardizedProfiles ADFnn - Document Filing and Retrieval (DFR) - Part 1: Introduction to the DFR ISP FirstEdition

IEC ISP 12069-2 Information Technology - International StandardizedProfiles ADFnn - Document Filing and Retrieval (DFR) - Part 2: Specification of ROSE, RTSE, ACSE, Presentation and Session Protocols for Use by DFRFirst Edition

IEC ISP 12069-3 Information Technology - International StandardizedProfiles ADFnn - Document Filing and Retrieval (DFR) - Part 3: ADF11 - Common Document Filing andRetrieval - Read Only Profile First Edition

IEC DISP 12069-4 (DRAFT) Information Technology - InternationalStandardized Profiles ADFnn - Document Filing andRetrieval (DFR) - Part 4: ADF12 - Common Filing andRetrieval - Archiving Profile ***CD-ROM ONLY***

IEC DISP 12069-5 (DRAFT) Information Technology - InternationalStandardized Profiles ADFnn - Document Filing andRetrieval (DFR) - Part 5: ADF13 - Common Filing andRetrieval - Document Store Manipulation Profile ***CD-ROM ONLY***

IEC DISP 12069-6 (DRAFT) Information Technology - InternationalStandardized Profiles ADFnn - Document Filing andRetrieval (DFR) - Part 6: ADF21 - Remote StoreManagement - Simple Management Profile ***CD-ROMONLY***

IEC DISP 12069-7 (DRAFT) Information Technology - InternationalStandardized Profiles ADFnn - Document Filing andRetrieval (DFR) - Part 7: ADF22 - Remote StoreManagement - Full Management Profile ***CD-ROMONLY***

IEC ISP 12070-1 Information Technology - International StandardizedProfiles FCSnnn - Character Set 8-Bit CodeStructure Based on ISO/IEC 2022 - Part 1: FCS111 - 2022 Option 1 First Edition; BS EN ISP 12070-1: 1997

IEC ISP 12071-1 Information Technology - International StandardizedProfile FCG-nnn - Computer Graphics MetafileInterchange Format - Part 1: FCG11 - BasicScientific and Technical Graphics (BST) FirstEdition

IEC ISP 12071-2 Information Technology - International StandardizedProfile FCG-nnn - Computer Graphics MetafileInterchange Format - Part 2: FCG23 - AdvancedScientific and Technical Graphics (AST) FirstEdition


IEC ISP 12071-3 Information Technology - International StandardizedProfile FCG-nnn - Computer Graphics MetafileInterchange Format - Part 3: FCG32 - BasicPresentation and Visualization - Model ProfileFirst Edition

IEC ISP 12071-4 Information Technology - International StandardizedProfile FCG-nnn - Computer Graphics MetafileInterchange Format - Part 4: FCG33 - AdvancedPresentation and Visualization (APV) First Edition

IEC DISP 12072 (DRAFT) Information Technology - InternationalStandardized Profile FD15 - Directory DataDefinitions - VT Use of the Directory ***CD-ROMONLY***

IEC DISP 12073 (DRAFT) Information Technology - InternationalStandardized Profile FD16 - Directory DataDefinitions - EDI Use of the Directory ***CD-ROMONLY***

IEC TR 12075 Information Technology - Customer Premises Cabling - Planning and Installation Guide to Support ISO/IEC 8802-5 Token Ring Stations First Edition

IEC 12087-1 Information Technology - Computer Graphics andImage Processing - Image Processing andInterchange (IPI) - Functional Specification - Part1: Common Architecture for Imaging First Edition

IEC 12087-2 Information Technology - Computer Graphics andImage Processing - Image Processing andInterchange (IPI) - Functional Specification - Part2: Programmer's Imaging Kernel System ApplicationProgram Interface First Edition; Corrigendum 109-15-1997

IEC 12087-3 Information Technology - Computer Graphics andImage Processing - Image Processing andInterchange (IPI) - Functional Specification - Part3: Image Interchange Facility (IIF) First Edition; Amendment 1-1996

IEC DIS 12087-5 (DRAFT) Information Technology - Computer Graphicsand Image Processing - Image Processing andInterchange (IPI) - Functional Specification - Part5: Basic Image Interchange Format (BIIF) ***CD-ROMONLY***

IEC 12088-4 Information Technology - Computer Graphics andImage Processing - Image Processing andInterchange - Application Program InterfaceLanguage Bindings - Part 4: C First Edition

IEC 12089 Information Technology - Computer Graphics andImage Processing - Encoding for the ImageInterchange Facility (IIF) First Edition

IEC DIS 12089.2 (DRAFT) Information Technology - Computer Graphicsand Image Processing - Encoding for the ImageProcessing and Interchange Standard (IPI) - Encoding for the Image Interchange Facility (IIF) ***CD-ROM ONLY***

IEC 12119 Information Technology - Software Packages - Quality Requirements and Testing First Edition; AS/NZS 4366: 1996

IEC 12207 Information Technology - Software Life CycleProcesses First Edition

IEC 12227 Information Technology - Programming Languages - SQL/Ada Module Description Language (SAMeDL) First Edition

IEC 12246 Information Technology - 8 mm Wide Magnetic TapeCartridge Dual Azimuth Format for InformationInterchange - Helical Scan Recording First Edition

IEC 12247 Information Technology - 3,81 mm Wide Magnetic Tape


Cartridge for Information Interchange - HelicalScan Recording - DDS Format Using 60 m and 90 mLength Tapes First Edition; Supersedes ISO/IEC10777: 1991

IEC 12248 Information Technology - 3,81 mm Wide Magnetic TapeCartridge for Information Interchange - HelicalScan Recording - DATA/DAT-DC Format Using 60 m and90 m Length Tapes First Edition

IEC TR 12382 Permuted Index of the Vocabulary of InformationTechnology Second Edition

IEC DIS 13208 (DRAFT) Information Technology - Text and OfficeSystems - Message Handling Systems - ElectronicData Interchange Messaging System ***CD-ROM ONLY***

IEC DIS 13209 (DRAFT) Information Technology - Text and OfficeSystems - Message Handling - Electronic DataInterchange Messaging Service ***CD-ROM ONLY***

IEC 13210 Information Technology - Test Methods for MeasuringConformance to POSIX First Edition; IEEE 1003.3

IEC 13211-1 Information Technology - Programming Languages - Prolog - Part 1: General Core First Edition

IEC 13213 Information Technology - Microprocessor Systems - Control and Status Registers (CSR) Architecturefor Microcomputer Buses First Edition; ANSI/IEEE1212

IEC TR 13233 Information Technology - Interpretation ofAccreditation Requirements in ISO/IEC Guide 25 - Accreditation of Information Technology andTelecommunications Testing Laboratories forSoftware and Protocol Testing Services FirstEdition

IEC DIS 13235 (DRAFT) Information Technology - Open DistributedProcessing - ODP Trading Function ***CD-ROM ONLY***

IEC DIS 13235- 1.2 (DRAFT) Information Technology - Open DistributedProcessing - ODP Trading Function - Part 1: Specification ***CD-ROM ONLY***

IEC DIS 13235-3 (DRAFT) Information Technology - Open DistributedProcessing - ODP Trading Function - Part 3: Provision of Trading Function Using OSI DirectoryService 1996 ***CD-ROM ONLY***

IEC DIS 13236 (DRAFT) Information Technology - Quality ofService - Framework ***CD-ROM ONLY***

IEC DIS 13238-3 (DRAFT) Information Technology - Data ManagementExport/Import Facilities - Part 3: Export/ImportFacilities for IRDS ***CD-ROM ONLY***

IEC DIS 13238-3.2 (DRAFT) Information Technology - Data ManagementExport/Import Facilities - Part 3: IRDS Export/Import Facility ***CD-ROM ONLY***

IEC 13239 Information Technology - Telecommunications andInformation Exchange between Systems - High-LevelData Link Control (HDLC) Procedures First Edition

IEC DIS 13239.2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures ***CD-ROMONLY***

IEC 13239 DRAFT AMD 1 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures; Amendment 1: Non-Basic Frame Formats - General ***CD-ROM ONLY***

IEC 13239 DRAFT AMD 2 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures; Amendment 2: Non-Basic Frame Formats - Provisionfor Multiple Address Fields ***CD-ROM ONLY***


IEC 13239 DRAFT AMD 3 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures; Amendment 3: Provision for 8-Bit FCS ***CD-ROMONLY***

IEC 13241 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Route Restriction ClassAdditional Network Feature First Edition

IEC 13242 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - RouteRestriction Class Additional Network Feature FirstEdition

IEC DIS 13244 (DRAFT) Information Technology - Open DistributedManagement Architecture (ODMA) ***CD-ROM ONLY***

IEC DIS 13245-1 (DRAFT) Information Technology - Framework: FormalMethods in Conformance Testing ***CD-ROM ONLY***

IEC 13246 Information Technology - Telecommunications andInformation Exchange between Systems - BroadbandPrivate Integrated Services Network - Inter-Exchange Signalling Protocol - Signalling ATMAdaptation Layer First Edition

IEC 13247 Information Technology - Telecommunications andInformation Exchange between Systems - BroadbandPrivate Integrated Services Network - Inter-Exchange Signalling Protocol - Basic Call/Connection Control First Edition

IEC DIS 13248-1 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory: ProtocolImplementation Conformance Statement (PICS) Proforma for the Directory Access Protocol ***CD-ROM ONLY***

IEC DIS 13248-2 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory: ProtocolImplementation Conformance Statement (PICS) Proforma for the Directory System Protocol ***CD-ROM ONLY***

IEC DIS 13248-3 (DRAFT) Information Technology - Open SystemsInterconnection - The Directory: ProtocolImplementation Conformance Statement (PICS) Proforma for the Directory Operational BindingManagement Protocol ***CD-ROM ONLY***

IEC DIS 13248-4 (DRAFT) Information Technology - Open SystemInterconnection - The Directory: ProtocolImplementation Conformance Statement (PICS) Proforma for the Directory Information ShadowingProtocol ***CD-ROM ONLY***

IEC TR 13335-1 Information Technology - Guidelines for theManagement of IT Security - Part 1: Concepts andModels for IT Security First Edition

IEC TR 13335-2 Information Technology - Guidelines for theManagement of IT Security - Part 2: Managing andPlanning IT Security First Edition

IEC TR 13345 Industrial Automation Systems - Specification ofSubsets of the Protocol for ISO/IEC 9506 FirstEdition

IEC 13346-1 Information Technology - Volume and File Structureof Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 1: General First Edition

IEC 13346-2 Information Technology - Volume and File Structureof Write-Once and Rewritable Media Using Non-


Sequential Recording for Information Interchange - Part 2: Volume and Boot Block Recognition FirstEdition

IEC DIS 13346-2 (DRAFT) Information Technology - Volume and FileStructure of Write-Once and Rewritable Media UsingNon-Sequential Recording for InformationInterchange - Part 2: Volume and Boot BlockRecognition ***CD-ROM ONLY***

IEC 13346-3 Information Technology - Volume and File Structureof Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 3: Volume Structure First Edition

IEC DIS 13346-3 (DRAFT) Information Technology - Volume and FileStructure of Write-Once and Rewritable Media UsingNon-Sequential Recording for InformationInterchange - Part 3: Volume Structure ***CD-ROMONLY***

IEC 13346-4 Information Technology - Volume and File Structureof Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 4: File Structure First Edition

IEC DIS 13346-4 (DRAFT) Information Technology - Volume and FileStructure of Write-Once and Rewritable Media UsingNon-Sequential Recording for InformationInterchange - Part 4: File Structure ***CD-ROMONLY***

IEC 13346-5 Information Technology - Volume and File Structureof Write-Once and Rewritable Media Using Non-Sequential Recording for Information Interchange - Part 5: Record Structure First Edition

IEC 13403 Information Technology - Information Interchange on300 mm Optical Disk Cartridges of the Write Once, Read Multiple (WORM) Type Using the CCS MethodFirst Edition

IEC 13421 Information Technology - Data Interchange on 12,7mm, 48-Track Magnetic Tape Cartridges - DLT 1Format First Edition

IEC 13422 Information Technology - Data Interchange on 90 mmFlexible Disk Cartridges 10 MByte Capacity UsingSector Servo Tracking - ISO Type 304 First Edition

IEC 13481 Information Technology - Data Interchange on 130 mmOptical Disk Cartridges - Capacity: 1 Gigabyte perCartridge First Edition

IEC 13490-1 Information Technology - Volume and File Structureof Read-Only and Write-Once Compact Disk Media forInformation Interchange - Part 1: General FirstEdition

IEC 13490-2 Information Technology - Volume and File Structureof Read-Only and Write-Once Compact Disk Media forInformation Interchange - Part 2: Volume and FileStructure First Edition

IEC 13522-1 Information Technology - Coding of Multimedia andHypermedia Information - Part 1: MHEG ObjectRepresentation - Base Notation (ASN.1) FirstEdition

IEC 13522-3 Information Technology - Coding of Multimedia andHypermedia Information - Part 3: MHEG ScriptInterchange Representation First Edition

IEC 13522-4 Information Technology - Coding of Multimedia andHypermedia Information - Part 4: MHEG RegistrationProcedure First Edition

IEC 13522-5 Information Technology - Coding of Multimedia andHypermedia Information - Part 5: Support for Base-Level Interactive Applications First Edition

IEC DIS 13522-6 (DRAFT) Information Technology - Coding of


Multimedia and Hypermedia Information - Part 6: Support for Enhanced Interactive Applications ***CD-ROM ONLY***

IEC TR 13532 Information Technology - Telecommunications andInformation Exchange between Systems - ProtocolCombinations to Provide and Support the OSI NetworkService First Edition

IEC 13549 Information Technology - Data Interchange on 130 mmOptical Disk Cartridges - Capacity: 1,3 Gigabytesper Cartridge First Edition

IEC TR 13561 Information Technology - Guidelines for EffectiveUse of Optical Disk Cartridges Conforming to ISO/IEC 10090 First Edition

IEC 13575 Information Technology - Telecommunications andInformation Exchange between Systems - 50-PoleInterface Connector Mateability Dimensions andContact Number Assignments First Edition

IEC TR 13594 Information Technology - Lower Layers SecurityFirst Edition

IEC 13614 Information Technology - Interchange on 300 mmOptical Disk Cartridges of the Write Once, ReadMultiple (WORM) Type Using the SSF Method FirstEdition

IEC 13642 Information Technology - Elements of ManagementInformation Related to the OSI Physical Layer FirstEdition

IEC DIS 13645 (DRAFT) Information Technology - Guidelines for theDesign of IRDS Content Modules ***CD-ROM ONLY***

IEC DIS 13650-1 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Test Suite for theOSI TP Protocol - Part 1: Test Suite Structure andTest Purposes ***CD-ROM ONLY***

IEC 13650-2 Information Technology - Open SystemsInterconnection - Conformance Test Suite for theOSI TP Protocol - Part 2: Test Management ProtocolSpecification First Edition

IEC DIS 13660 (DRAFT) Information Technology - Office Equipment - Measurement of Image Quality Attributes forHardcopy Output - Binary Monochrome Text andGraphic Images ***CD-ROM ONLY***

IEC DIS 13673 (DRAFT) Information Technology - Text and OfficeSystems - Conformance Testing for StandardGeneralized Markup Language (SGML) Systems ***CD-ROM ONLY***

IEC 13712-1 Information Technology - Remote Operations: Concepts, Model and Notation First Edition; (Corrigendum 1-1996) (Amendment 1-1996)

IEC 13712-2 Information Technology - Remote Operations: OSIRealizations - Remote Operations Service Element (ROSE) Service Definition First Edition; (Correctedand Reprinted - 1995) (Amendment 1-1996)

IEC 13712-3 Information Technology - Remote Operations: OSIRealizations - Remote Operations Service Element (ROSE) Protocol Specification First Edition; (Corrected and Reprinted - 1995) (Amendment 1-1996)

IEC 13712-3 DRAFT AMD 1 (DRAFT) Information Technology - RemoteOperations: OSI Realizations - Remote OperationsService Element (ROSE) Protocol SpecificationAmendment 1: Mapping to A-Unit-Data and Built-InOperations; (1995) ***CD-ROM ONLY***

IEC 13714 Information Technology - Document Processing andRelated Communication - User Interface toTelephone-Based Services - Voice MessagingApplications First Edition


IEC 13719-1 Information Technology - Portable Common ToolEnvironment (PCTE) - Part 1: Abstract SpecificationFirst Edition

IEC 13719-1 DRAFT AMD 1 (DRAFT) Information Technology - Portable CommonTool Environment (PCTE) - Part 1: AbstractSpecification; Amendment 1: Fine-Grain ObjectExtensions 1997***CD-ROM ONLY***

IEC 13719-1 DRAFT AMD 2 (DRAFT) Information Technology - Portable CommonTool Environment (PCTE) - Part 1: AbstractSpecification; Amendment 2: Object-OrientationExtensions 1997***CD-ROM ONLY***

IEC 13719-2 Information Technology - Portable Common ToolEnvironment (PCTE) - Part 2: C Programming LanguageBinding First Edition

IEC 13719-2 DRAFT AMD 1 (DRAFT) Information Technology - Portable CommonTool Environment (PCTE) - Part 2: C ProgrammingLanguage Binding; Amendment 1: Fine-Grain ObjectExtensions 1997***CD-ROM ONLY***

IEC 13719-2 DRAFT AMD 2 (DRAFT) Information Technology - Portable CommonTool Environment (PCTE) - Part 2: C ProgrammingLanguage Binding; Amendment 2: Object-OrientationExtensions 1997***CD-ROM ONLY***

IEC 13719-3 Information Technology - Portable Common ToolEnvironment (PCTE) - Part 3: Ada ProgrammingLanguage Binding First Edition

IEC 13719-3 DRAFT AMD 1 (DRAFT) Information Technology - Portable CommonTool Environment (PCTE) - Part 3: Ada ProgrammingLanguage Binding; Amendment 1: Fine-Grain ObjectExtensions 1997***CD-ROM ONLY***

IEC 13719-3 DRAFT AMD 2 (DRAFT) Information Technology - Portable CommonTool Environment (PCTE) - Part 3: Ada ProgrammingLanguage Binding; Amendment 2: Object-OrientationExtensions 1997***CD-ROM ONLY***

IEC DIS 13719-4 (DRAFT) Information Technology - Portable CommonTool Environment (PCTE) - Part 4: IDL Binding (Interface Definition Language) ***CD-ROM ONLY***

IEC DIS 13751 (DRAFT) Information Technology - Programminglanguages, Their Environments and System SoftwareInterfaces - Programming Languages APL, Extended ***CD-ROM ONLY***

IEC 13800 Information Technology - Procedure for theRegistration of Identifiers and Attributes forVolume and File Structure First Edition

IEC DIS 13813 (DRAFT) Information Technology - ProgrammingLanguages - Generic Packages of Real and ComplexType Declarations and Basic Operations for Ada (Including Vector and Matrix Types) ***CD-ROMONLY***

IEC DIS 13814 (DRAFT) Information Technology - ProgrammingLanguages - Generic Package of Complex ElementaryFunctions for Ada ***CD_ROM ONLY***

IEC 13816 Information Technology - Programming Languages, Their Environments and System Software Interfaces - Programming Language ISLISP First Edition

IEC 13817-1 Information Technology - Programming Languages, Their Environments and System Software Interfaces - Vienna Development Method - SpecificationLanguage - Part 1: Base Language First Edition

IEC 13818-1 Information Technology - Generic Coding of MovingPictures and Associated Audio Information: SystemsFirst Edition; Amendment 1-1997; Amendment 2-1997

IEC 13818-1 DRAFT AMD 2 (WITHDRAWN) (DRAFT) Information Technology - Generic Coding of Moving Pictures and AssociatedAudio Information - Part 1: Systems Amendment 2:


Registration Procedure for "Format Identifier"; (1995) ***CD-ROM ONLY***

IEC 13818-1 DRAFT AMD 3 (WITHDRAWN) (DRAFT) Information Technology - Generic Coding of Moving Pictures and AssociatedAudio Information: Systems 1996; ***CD-ROM ONLY***

IEC 13818-1 DRAFT AMD 4 (WITHDRAWN) (DRAFT) Information Technology - Generic Coding of Moving Pictures and AssociatedAudio Information: Systems Amendment 4 1997; ***CD-ROM ONLY***

IEC 13818-2 Information Technology - Generic Coding of MovingPictures and Associated Audio Information: VideoFirst Edition; Corrigendum 1-1997; Corrigendum2-1997; Amendment 1-1997; Amendment 2-1997

IEC 13818-2 DRAFT AMD 2 (WITHDRAWN) (DRAFT) Information Technology - Generic Coding of Moving Pictures and AssociatedAudio Information - Part 2: Video Amendment 2: 4:2:2 Profile; (1995) ***CD-ROM ONLY***

IEC 13818-2 DRAFT AMD 3 (WITHDRAWN) (DRAFT) Information Technology - Generic Coding of Moving Pictures and AssociatedAudio Information: Video Amendment 3: MultiviewProfile 1996 ***CD-ROM ONLY***

IEC 13818-2 DRAFT AMD 4 (WITHDRAWN) (DRAFT) Information Technology - Generic Coding of Moving Pictures and AssociatedAudio Information: Video Amendment 4: ExtensionCode Assignment 1996; ***CD-ROM ONLY***

IEC DIS 13818-3 (DRAFT) Information Technology - Generic Coding ofMoving Pictures and Associated Audio Information - Part 3: Audio ***CD-ROM ONLY***

IEC 13818-3 DRAFT AMD 1 (DRAFT) Information Technology - Generic Coding ofMoving Pictures and Associated Audio Information - Part 3: Audio Amendment 1: Registration Procedurefor "Copyright Identifier"; (1995) ***CD-ROMONLY***

IEC DIS 13818-4 (DRAFT) Information Technology - Generic Coding ofMoving Pictures and Associated Audio Information - Part 4: Compliance Testing ***CD-ROM ONLY***

IEC TR 13818-5 Information Technology - Generic Coding of MovingPictures and Associated Audio Information - Part5: Software Simulation First Edition

IEC DIS 13818-6 (DRAFT) Information Technology - Generic Coding ofMoving Pictures and Associated Audio Information - Part 6: Extensions for DSM-CC ***CD-ROM ONLY***

IEC 13818-7 Information Technology - Generic Coding of MovingPictures and Associated Audio Information - Part7: Advanced Audio Coding (AAC) First Edition

IEC 13818-9 Information Technology - Generic Coding of MovingPictures and Associated Audio Information - Part9: Extension for Real Time Interface for SystemsDecoders First Edition

IEC TR 13841 Information Technology - Guidance on MeasurementTechniques for 90 mm Optical Disk Cartridges FirstEdition

IEC 13842 Information Technology - 130 mm Optical DiskCartridges for Information Interchange - Capacity: 2 Gbytes Per Cartridge First Edition

IEC 13863 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - PathReplacement Additional Network Feature FirstEdition; ETSI PRETS 300 258: 1995

IEC DIS 13863 (DRAFT) Information Technology - Private IntegratedServices Network (PISN) - Specification, FunctionalModel and Information Flows - Path ReplacementAdditional Network Feature ***CD-ROM ONLY***


IEC 13864 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - NameIdentification Supplementary Services First Edition

IEC 13865 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - CallTransfer Supplementary Services First Edition; ETSIPRETS 300 260: 1995

IEC 13866 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - CallCompletion Supplementary Services First Edition

IEC 13868 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Name IdentificationSupplementary Services First Edition

IEC 13869 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Call Transfer SupplementaryService First Edition

IEC 13870 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Call Completion SupplementaryServices First Edition

IEC 13871 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateTelecommunications Networks - Digital ChannelAggregation First Edition

IEC 13872 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - CallDiversion Supplementary Services First Edition; AS/NZS 4341(INT): 1995

IEC 13873 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Call Diversion SupplementaryServices First Edition

IEC 13874 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Path Replacement AdditionalNetwork Feature First Edition; ETSI ETS 300259:1995; Corrigendum 1-1996

IEC DIS 13874 (DRAFT) Information Technology - Telecommunicationsand Information Exchange between Systems - PrivateIntegrated Services Network (PISN) - Inter-ExchangeSignalling Protocol - Path Replacement AddtionalNetwork Feature ***CD-ROM ONLY***

IEC 13886 Information Technology - Language-IndependentProcedure Calling (LIPC) First Edition

IEC 13888-1 Information Technology - Security Techniques - Non-Repudiation - Part 1: General First Edition

IEC 13888-2 Information Technology - Security Techniques - Non-Repudiation - Part 2: Mechanisms Using SymmetricTechniques First Edition

IEC 13888-3 Information Technology - Security Techniques - Non-


Repudiation - Part 3: Mechanisms Using AsymmetricTechniques First Edition

IEC 13923 Information Technology - 3,81 mm Wide Magnetic TapeCartridge for Information Interchange - HelicalScan Recording - DDS-2 Format Using 120 m LengthTape First Edition

IEC DIS 13961 (DRAFT) Information Technology - IEEE Standard forScalable Coherent Interface (SCI) ***CD-ROM ONLY***

IEC 13962 Information Technology - Data Interchange on 12,7mm, 112-Track Magnetic Tape Cartridges - DLT 2Format First Edition

IEC 13963 Information Technology - Data Interchange on 90 mmOptical Disk Cartridges - Capacity: 230 Megabytesper Cartridge First Edition

IEC 14102 Information Technology - Guideline for theEvaluation and Selection of CASE Tools FirstEdition

IEC 14136 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - Identification Supplementary Services FirstEdition; ETSI PRETS 300173: 1995

IEC DIS 14143-1 (DRAFT) Information Technology - SoftwareMeasurement - Part 1: Definition of Functional SizeMeasurement ***CD-ROM ONLY***

IEC DIS 14143-1.2 (DRAFT) Information Technology - SoftwareMeasurement - Functional Size Measurement - Part1: Definition of Concepts ***CD-ROM ONLY***

IEC DIS 14165-111 (DRAFT) Information Technology - Fibre Channel - Part 111: Physical and Signaling Interface (FC-PH) ***CD-ROM ONLY***

IEC DIS 14165-211 (DRAFT) Information Technology - Fibre Channel - Part 211: Mapping to HIPPI-FP (FC-FP) ***CD-ROMONLY***

IEC 14169 Information Technology - 90 mm Flexible DiskCartridges for Information Interchange - 21 MBytesFormatted Capacity - ISO Type 305 First Edition

IEC 14251 Information Technology - Data Interchange on 12,7mm 36-Track Magnetic Tape Cartridges First Edition

IEC 14360 Information Technology - Open SystemsInterconnection (OSI) Abstract Data Manipulation - Application Program Interface (API) (LanguageIndependent) First Edition

IEC 14361 Information Technology - MHS-Based ElectronicMessaging - Application Program Interface (API) (Language Independent) First Edition

IEC 14362 Information Technology - Test Methods for MeasuringConformance to Open Systems Interconnection (OSI) Abstract Data Manipulation - Application ProgramInterface (API) (Language Independent) FirstEdition

IEC 14363 Information Technology - Test Methods for MeasuringConformance to MHS-Based Electronic Messaging - Application Program Interface (API) (LanguageIndependent) First Edition

IEC 14364 Information Technology - Open SystemsInterconnection (OSI) Abstract Data Manipulation CLanguage Interfaces - Binding for ApplicationProgram Interface (API) First Edition

IEC 14365 Information Technology - MHS-Based ElectronicMessaging C Language Interfaces - Binding forApplication Program Interface (API) First Edition

IEC 14366 Information Technology - Test Methods for Measuring


Conformance to Open Systems Interconnection (OSI) Abstract Data Manipulation C Language Interfaces - Binding for Application Program Interface (API) First Edition

IEC 14367 Information Technology - Test Methods for MeasuringConformance to MHS-Based Electronic Messaging CLanguage Interfaces - Binding for ApplicationProgram Interface (API) First Edition

IEC 14392 Information Technology - Directory Services - Application Program Interface (API) (LanguageIndependent) First Edition

IEC 14393 Information Technology - Test Methods for MeasuringConformance to Directory Services - ApplicationProgram Interface (API) (Language Independent) First Edition

IEC 14394 Information Technology - Directory Services CLanguage Interfaces - Binding for ApplicationProgram Interface (API) First Edition

IEC 14395 Information Technology - Test Methods for MeasuringConformance to Directory Services C LanguageInterfaces - Binding for Application ProgramInterface (API) First Edition

IEC DIS 14417 (DRAFT) Information Technology - Data RecordingFormat DD-1 for Magnetic Tape Cassette Conformingto ISO/IEC 1016 ***CD-ROM ONLY***

IEC DIS 14465 (DRAFT) Information Technology - Open SystemsInterconnection - Conformance Test Suite for theOSI CCR Protocol - Test Suite Structure and TestPurposes ***CD-ROM ONLY***

IEC DIS 14473 (DRAFT) Information Technology - MinimumInformation to Be Specified for Image Scanners ***CD-ROM ONLY***

IEC TR 14475 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Architecture andScenarios for Private Integrated ServicesNetworking First Edition

IEC DIS 14478-1 (DRAFT) Information Technology - Computer Graphicsand Image Processing - Presentation Environment forMultimedia Objects (PREMO) - Part 1: Fundamentalsof PREMO ***CD-ROM ONLY***

IEC DIS 14478-2 (DRAFT) Information Technology - Computer Graphicsand Image Processing - Presentation Environment forMultimedia Objects (PREMO) - Part 2: FoundationComponent ***CD-ROM ONLY***

IEC DIS 14478-3 (DRAFT) Information Technology - Computer Graphicsand Image Processing - Presentation Environment forMultimedia Objects (PREMO) - Part 3: MultimediaSystems Services ***CD-ROM ONLY***

IEC DIS 14478-4 (DRAFT) Information Technology - Computer Graphicsand Image Processing - Presentation Environment forMultimedia Objects (PREMO) - Part 4: Modelling, Rendering and Interaction Component ***CD-ROMONLY***

IEC DIS 14515-1 (DRAFT) Information Technology - ProgrammingLanguages, Their Environments and System SoftwareInterfaces - Portable Operating System Interface (POSIX) - Test Methods for Measuring Compliance toPOSIX - Part 1: System Interfaces ***CD-ROM ONLY***

IEC DIS 14515-2 (DRAFT) Information Technology - Test Methods forMeasuring Conformance to POSIX - Part 2: Shell andUtilities ***CD-ROM ONLY***

IEC 14517 Information Technology - 130 mm Optical DiskCartridges for Information Interchange - Capacity: 2,6 Gbytes per Cartridge First Edition


IEC DIS 14519 (DRAFT) Information Technology - POSIX Ada LanguageInterfaces - Binding for System Application ProgramInterface (API) - Realtime Extensions ***CD-ROMONLY***

IEC DIS 14519-1 (DRAFT) Information Technology - POSIX Ada LanguageInterfaces - Part 1: Binding for System ApplicationProgram Interface (API) ***CD-ROM ONLY***

IEC 14536 Information Technology - Microprocessor Systems - Futurebus+, Profile (Military) First Edition; ANSI/IEEE Std 896.5

IEC DIS 14545 (DRAFT) Information Technology - Methods forMeasuring Copying Machines Productivity ***CD-ROMONLY***

IEC 14568 Information Technology - DXL: Diagram EXchangeLanguage for Tree-Structured Charts First Edition

IEC DIS 14575 (DRAFT) Heterogeneous Interconnect (HIC) (LowCost, Low Latency, Scalable, Serial Interconnectfor Parallel System Construction) ***CD-ROM ONLY***

IEC DIS 14576 (DRAFT) Information Technology - Synchronous SplitTransfer Type System Bus (STbus) - Logical Layer ***CD-ROM ONLY***

IEC DIS 14598-1 (DRAFT) Information Technology - Software ProductEvaluation - Part 1 - General Overview ***CD-ROMONLY***

IEC DIS 14598-4 (DRAFT) Information Technology - Software ProductEvaluation - Part 4: Process for Acquirers ***CD-ROM ONLY***

IEC DIS 14598-5 (DRAFT) Information Technology - Evaluation ofSoftware Product - Part 5: Process for Evaluators ***CD-ROM ONLY***

IEC 14608-1 Information Technology - Open SystemsInterconnection - The Directory: Directory AccessProtocol - Protocol Implementation ConformanceStatement (PICS) Proforma First Edition

IEC 14608-2 Information Technology - Open SystemsInterconnection - The Directory: Directory SystemProtocol - Protocol Implementation ConformanceStatement (PICS) Proforma First Edition

IEC 14662 Information Technology - Open-Edi Reference ModelFirst Edition

IEC 14699 Information Technology - Open SystemsInterconnection - Transport Fast Byte ProtocolFirst Edition

IEC 14700 Information Technology - Open SystemsInterconnection - Network Fast Byte Protocol FirstEdition

IEC 14709-1 Information Technology - Configuration of CustomerPremises Cabling (CPC) for Applications - Part 1: Integrated Services Digital Network (ISDN) BasicAccess First Edition

IEC DIS 14709-2 (DRAFT) Information Technology - Configuration ofCustomer Premises Cabling (CPC) for Applications - Part 2: ISDN Primary Access ***CD-ROM ONLY***

IEC DIS 14719 (DRAFT) Information Technology - Reliable TransferService Element - Protocol ImplementationConformance Statement (PICS) Proforma ***CD-ROMONLY***

IEC DIS 14720 (DRAFT) Information Technology - Remote OperationsService Element - Protocol ImplementationConformance Statement (PICS) Proforma ***CD-ROMONLY***

IEC DIS 14750-1 (DRAFT) Information Technology - Open DistributedProcessing - Interface Definition Language ***CD-ROM ONLY***


IEC DIS 14754 (DRAFT) Information Technology - Pen-BasedInterfaces - Common Gestures for Text Editing withPen-Based Systems ***CD-ROM ONLY***

IEC DIS 14754.2 (DRAFT) Information Technology - Pen-BasedInterfaces - Common Gesture for Text Editing withPen-Based Systems ***CD-ROM ONLY***

IEC 14755 Information Technology - Input Methods to EnterCharacters from the Repertoire of ISO/IEC 10646with a Keyboard or Other Input Device First Edition

IEC 14760 Information Technology - Data Interchange on 90 mmOverwritable and Read Only Optical Disk CartridgesUsing Phase Change - Capacity: 1,3 Gbytes perCartridge First Edition

IEC DIS 14763-1 (DRAFT) Information Technology - Implementation andOperation of Customer Premises Cabling - Part 1: Administration ***CD-ROM ONLY***

IEC 14765 Information Technology - Framework for ProtocolIdentification and Encapsulation First Edition

IEC 14766 Information Technology - Telecommunications andInformation Exchange between Systems - Use of OSIApplications Over the Internet Transmission ControlProtocol (TCP) First Edition

IEC DIS 14771 (DRAFT) Information Technology - Open DistributedProcessing - Naming Framework ***CD-ROM ONLY***

IEC DIS 14772-1 (DRAFT) Information Technology - Virtual RealityModelling Language (VRML) ***CD-ROM ONLY***

IEC DIS 14776-411 (DRAFT) Information Technology - Small ComputerSystem Interface-3 - Part 411: SCSI-3 ArchitectureModel (SCSI-3 SAM) ***CD-ROM ONLY***

IEC 14833 Information Technology - Data Interchange on 12,7mm 128-Track Magnetic Tape Cartridges - DLT 3Format First Edition

IEC 14834 Information Technology - Distributed TransactionProcessing - the XA Specification First Edition

IEC 14840 Information Technology - 12,65 mm Wide MagneticTape Cartridge for Information Interchange - Helical Scan Recording - Data-D3-1 Format FirstEdition

IEC 14841 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - Call OfferSupplementary Service First Edition

IEC 14842 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - Do NotDisturb and Do Not Disturb Override SupplementaryServices First Edition

IEC 14843 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Call Offer SupplementaryService First Edition

IEC 14844 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Do Not Disturb and Do NotDisturb Override Supplementary Services FirstEdition

IEC 14845 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - Call


Intrusion Supplementary Service First Edition IEC 14846 Information Technology - Telecommunications and

Information Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Call Intrusion SupplementaryService First Edition

IEC 14863 Information Technology - System-Independent DataFormat (SIDF) First Edition

IEC FDIS 14882 (DRAFT) Programming Languages - C++ ***CD-ROMONLY***

IEC 14957 Information Technology - Notation of Format forData Element Values First Edition

IEC 14977 Information Technology - Syntactic Metalanguage - Extended BNF First Edition

IEC DIS 14980 (DRAFT) Information Technology - Code of Practicefor Information Security Management ***CD-ROMONLY***

IEC DIS 15026 (DRAFT) Information Technology - System andSoftware Integrity Levels ***CD-ROM ONLY***

IEC 15041 Information Technology - Data Interchange on 90 mmOptical Disk Cartridges - Capacity: 640 Mbytes perCartridge First Edition

IEC 15049 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - Advice ofCharge Supplementary Services First Edition

IEC 15050 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Advice of ChargeSupplementary Services

IEC 15051 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - RecallSupplementary Service First Edition

IEC 15052 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Recall Supplementary ServiceFirst Edition

IEC 15053 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - CallInterception Additional Network Feature FirstEdition

IEC 15054 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Call Interception AdditionalNetwork Feature First Edition

IEC 15055 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - TransitCounter Additional Network Feature First Edition

IEC 15056 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - Transit Counter AdditionalNetwork Feature First Edition

IEC DIS 15057 (DRAFT) Information Technology - Microprocessor


Systems - Futurebus+ - Physical Layer and ProfileSpecification ***CD-ROM ONLY***

IEC TR 15067-2 Information Technology - Home Electronic Systems (HES) Application Model - Part 2: Lighting Modelfor HES First Edition

IEC DIS 15068-2 (DRAFT) Information Technology - Portable OperatingSystem Interface (POSIX) System Administration - Part 2: Software Administration ***CD-ROM ONLY***

IEC DIS 15068-3 (DRAFT) Information Technology - Portable OperatingSystem Interface (POSIX) System Administration - Part 3: User and Group Account Administration ***CD-ROM ONLY***

IEC ISP 15121-1 Information Technology - International StandardizedProfile AOD1n - Interactive Manipulation of ODADocuments - Part 1: AOD11 - DTAM/Read Only FirstEdition

IEC ISP 15121-2 Information Technology - International StandardizedProfile AOD1n - Interactive Manipulation of ODADocuments - Part 2: AOD12 - DTAM/Insert FirstEdition

IEC ISP 15121-3 Information Technology - International StandardizedProfile AOD1n - Interactive Manipulation of ODADocuments - Part 3: AOD13 - DTAM/ ManipulationFirst Edition

IEC DISP 15122-1 (DRAFT) Information Technology - InternationalStandardized Profiles - AOM3nn - OSI Management - Lower Layer Systems and Network ManagementEnsemble - Part 1: AOM311 - Lower Layer Systems andNetwork Management Ensemble for TA/RA/RD Profiles ***CD-ROM ONLY***

IEC DISP 15122-2 (DRAFT) Information Technology - InternationalStandardized Profiles AOM3nn - OSI Management - Lower Layer Systems and Network ManagementEnsemble - Part 2: AOM312 - Lower Layer Systems andNetwork Management Ensemble for TB/TC/TD/TE/RB/RCProfiles ***CD-ROM ONLY***

IEC DISP 15123-1 (DRAFT) Information Technology - InternationalStandardized Profile - OSI Management - CommonManagement Information for Lower Layer Profiles - Part 1: Transport Layer Management Information ***CD-ROM ONLY***

IEC DISP 15123-2 (DRAFT) Information Technology - InternationalStandardized Profile - OSI Management - CommonManagement Information for Lower Layer Profiles - Part 2: Network Layer Management Information ***CD-ROM ONLY***

IEC DISP 15123-3 (DRAFT) Information Technology - InternationalStandardized Profile - OSI Management - CommonManagement Information for Lower Layer Profiles - Part 3: IS-IS Intra-Domain Routeing ProtocolManagement Information ***CD-ROM ONLY***

IEC DISP 15123-4 (DRAFT) Information Technology - InternationalStandardized Profile - OSI Management - CommonManagement Information for Lower Layer Profiles - Part 4: Inter-Domain Routeing Protocol ManagementInformation ***CD-ROM ONLY***

IEC DISP 15123-5 (DRAFT) Information Technology - InternationalStandardized Profile - OSI Management - CommonManagement Information for Lower Layer Profiles - Part 5: Data Link Layer Management Information ***CD-ROM ONLY***

IEC DISP 15124-1 (DRAFT) Information Technology - InternationalStandardized Profile FOD126 - Open DocumentFormat: Image Applications - Enhanced DocumentStructure - Character, Raster Graphics, and


Geometric Graphics Content Architecture - Part 1: Document Application Profile (DAP) ***CD-ROMONLY***

IEC DISP 15125-4 (DRAFT) Information Technology - InternationalStandardized Profiles ADInn - OSI Directory - Part4: ADY22 - DSA Support of Distributed Operations ***CD-ROM ONLY***

IEC DISP 15125-7 (DRAFT) Information Technology - InternationalStandardized Profiles ADInn - OSI Directory - Part7: DSA to DSA Authentication (ADY43) ***CD-ROMONLY***

IEC DISP 15125-10 (DRAFT) Information Technology - InternationalStandardized Profiles ADYnn - OSI Directory - Part10: ADY51 - Shadowing Using ROSE ***CD-ROM ONLY***

IEC DISP 15125-12 (DRAFT) Information Technology - InternationalStandardized Profiles ADYnn - OSI Directory - Part12: ADY53 - Shadowing Subsets ***CD-ROM ONLY***

IEC DISP 15126-1 (DRAFT) Information Technology - InternationalStandardized Profiles FDYnn - Directory DataDefinitions - Part 1: FDY11 - Common Directory Use (Normal) ***CD-ROM ONLY***

IEC DISP 15126-2 (DRAFT) Information Technology - InternationalStandardized Profiles FDYnn - Directory DataDefinitions - Part 2: FDY12 - Directory SystemSchema ***CD-ROM ONLY***

IEC DISP 15127-1 (DRAFT) Information Technology - InternationalStandardized Profiles MED1n-C - Medical ImageInterchange Profiles - Simple Point-to Point ImageTransfer - Part 1: MED11-C (AFT11-C) File Transferof Unstructured Binary Data ***CD-ROM ONLY***

IEC DISP 15128-1 (DRAFT) Information Technology - InternationalStandardized Profiles MED2n-C - Medical ImageInterchange Profiles - Store-and-Forward ImageTransfer - Part 1: MED222-C (AMH21-C, AMH22-C, AMH23-C, AMH24-C) Interpersonal Messaging - Externally Defined Body Part ***CD-ROM ONLY***

IEC 15145 Information Technology - Programming Languages - Forth First Edition

IEC 15200 Information Technology - Adaptive Lossless DataCompression Algorithm (ALDC) First Edition

IEC DIS 15205 (DRAFT) Standard for Chip and Module InterconnectBus: SBus ***CD-ROM ONLY***

IEC DIS 15298 (DRAFT) Information Technology - OSI ApplicationsProgram Interfaces - File Transfer, Access, andManagement (C Language) ***CD-ROM ONLY***

IEC 15307 Information Technology - Data Interchange on 12,7mm 128-Track Magnetic Tape Cartridges - DLT 4Format First Edition

IEC DIS 15404-1 (DRAFT) Office Machines - Facsimile Equipment - Part 1: Concepts and Classification ***CD-ROMONLY***

IEC DIS 15404-2 (DRAFT) Office Machines - Facsimile Equipment - Part 2: Minimum Requirements for Documents to BeTransmitted ***CD-ROM ONLY***

IEC DIS 15404-3 (DRAFT) Office Machines - Facsimile Equipment - Part 3: Minimum Requirements for Received Copies ***CD-ROM ONLY***

IEC DIS 15411 (DRAFT) Information Technology - Segmented KeyboardLayouts ***CD-ROM ONLY***

IEC 15485 Information Technology - Data Interchange on 120 mmOptical Disk Cartridges Using Phase Change PDFormat - Capacity: 650 Mbytes per Cartridge FirstEdition

IEC 15486 Information Technology - Data Interchange on 130 mm


Optical Disk Cartridges of Type WORM (Write OnceRead Many) Using Irreversible Effects - Capacity: 2,6 Gbytes per Cartridge First Edition

IEC 15498 Information Technology - Data Interchange on 90 mmOptical Disk Cartridges - HS-1 Format - Capacity: 650 Mbytes per Cartridge First Edition

IEC 15505 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Specification, Functional Model and Information Flows - MessageWaiting Indication Supplementary Service FirstEdition

IEC 15506 Information Technology - Telecommunications andInformation between Systems - Private IntegratedServices Network - Inter-Exchange SignallingProtocol - Message Waiting Indication SupplementaryService First Edition

IEC 15507 Information Technology - Telecommunications andInformation Exchange between Systems - PrivateIntegrated Services Network - Inter-ExchangeSignalling Protocol - PINX Clock SynchroizationFirst Edition

IEC DIS 15521 (DRAFT) Information Technology - 3,81 mm WideMagnetic Tape Cartridge for InformatationInterchange - Helical Scan Recording - DDS-3 FormatUsing 125 m Length Tapes ***CD-ROM ONLY***

IEC DIS 15718 (DRAFT) Information Technology - 8 mm Wide MagneticTape Cartridge for Information Interchange - Helical Scan Recording - HH-1 Format ***CD-ROMONLY***

IEC 15731 Information Technology - 12,65 mm Wide MagneticTape Cassette for Information Interchange - HelicalScan Recording - DTF-1 Format First Edition

IEC DIS 15757 (DRAFT) Information Technology - 8 mm Wide MagneticTape Cartridge for Information Interchange - Helical Scan Recording - DA-2 Format ***CD-ROMONLY***

IEC DIS 15771 (DRAFT) Information Technology - Private IntegratedServices Network (PISN) - Specification, FunctionalModel and Information Flows - Common InformationAdditional Network Feature ***CD-ROM ONLY***

IEC DIS 15772 (DRAFT) Information Technology - Private IntegratedServices Network (PISN) - Inter-Exchange SignallingProtocol - Common Information Additional NetworkFeature ***CD-ROM ONLY***

IEC DIS 15773 (DRAFT) Information Technology - Broadband PrivateIntegrated Services Network (B-PISN) - Inter-Exchange Signalling Protocol - Transit CounterAdditional Network Feature ***CD-ROM ONLY***

IEC DIS 15775 (DRAFT) Office Machines - Test Chart for ColourCopying Machines - Realisation and Application ***CD-ROM ONLY***

IEC DIS 15776 (DRAFT) Information Technology - VME64 ***CD-ROMONLY***

IEC DIS 15780 (DRAFT) Information Technology - 8 mm Wide MagneticTape Cartridge for Information Interchange - Helical Scan Recording - AIT-1 Format ***CD-ROMONLY***

IEC 15802-1 Information Technology - Telecommunications andInformation Exchange Between Systems - Local andMetropolitan Area Networks - Common Specifications - Part 1: Medium Access Control (MAC) ServiceDefinition First Edition; Replaces ISO 10039

IEC 15802-2 Information Technology - Telecommunications andInformation Exchange Between Systems - Local and


Metropolitan Area Networks - Common Specifications - Part 2: LAN/MAN Management First Edition; (ANSI/IEEE 802.1B)

IEC DIS 15802-3 (DRAFT) Information Technology - Local andMetropolitan Area Networks - Overview - Part 3: System Load Protocol ***CD-ROM ONLY***

IEC 15802-4 Information Technology - Telecommunications andInformation Exchange Between Systems - Local andMetropolitan Area Networks - Common Specifications - Part 4: System Load Protocol First Edition; (ANSI/IEEE 802.1E)

IEC 15802-5 Information Technology - Telecommunications andInformation Exchange between Systems - Local andMetropolitan Area Networks - Common Specifications - Part 5: Remote Media Access Control (MAC) Bridging First Edition; ANSI/IEEE Std 802.1G

IEC DIS 15842 (DRAFT) Information Technology - SCSI-2 CommonAccess - Method Transport and SCSI InterfaceModule ***CD-ROM ONLY***

IEC DIS 15846 (DRAFT) Information Technology - Software LifeCycle Processes - Configuration Management forSoftware ***CD-ROM ONLY***

IEC DIS 15851 (DRAFT) Information Technology - CommunicationProtocol - Open MUMPS Interconnect ***CD-ROMONLY***

IEC DIS 15852 (DRAFT) Information Technology - ProgrammingLanguages - M Windowing API ***CD-ROM ONLY***

IEC DIS 15879 (DRAFT) Information Technology - SystemsManagement - Distributed Software Administration - DCE-RPC Interoperability (XDSA-DCE) ***CD-ROMONLY***

IEC DIS 15895 (DRAFT) Information Technology - Data Interchangeon 12,7 mm 128-Track Magnetic Tape Cartridges - DLT3-XT Format ***CD-ROM ONLY***

IEC DIS 15896 (DRAFT) Information Technology - Data Interchangeon 12,7 mm 208-Track Magnetic Tape Cartridges - DLT5 Format ***CD-ROM ONLY***

IEC DIS 15897 (DRAFT) Information Technology - Procedures forEuropean Registration of Cultural Elements ***CD-ROM ONLY***

IEC DIS 15898 (DRAFT) Information Technology - Data Interchangeon 356 mm Optical Disk Cartridges - WORM, UsingPhase Change Technology - Capacity: 14,8 and 25Gbytes Per Cartridge ***CD-ROM ONLY***

IEC DIS 15899 (DRAFT) Information Technology - Broadband PrivateIntegrated Services Network (B-PISN) - ServiceDescription - Broadband Connection Oriented BearerServices ***CD-ROM ONLY***

IEC DIS 15917 (DRAFT) Information Technology - High-PerformanceParallel Interface - Serial Specification (HIPPI-Serial) ***CD-ROM ONLY***

IEC DIS 15918 (DRAFT) Information Technology - High-PerformanceParallel Interface - Mapping to AsynchronousTransfer Mode (HIPPI-ATM) ***CD-ROM ONLY***

IEC DIS 15991 (DRAFT) Information Technology - Private IntegratedServices Network (PISN) - Specification, FunctionalModel and Information Flows - Call PriorityInterruption and Call Priority InterruptionProtection Supplementary Services ***CD-ROM ONLY***

IEC DIS 15992 (DRAFT) Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - CallPriority Interruption and Call PriorityInterruption Protection Supplementary Services ***CD-ROM ONLY***


IEC DIS 16022 (DRAFT) Information Technology - InternationalSymbology Specification - Data Matrix ***CD-ROMONLY***

IEC DIS 16023 (DRAFT) Information Technology - InternationalSymbology Specification - MaxiCode ***CD-ROMONLY***

IEC DIS 16262 (DRAFT) ECMAScript: A General Purpose, Cross-Platform Programming Language ***CD-ROM ONLY***

IEC DIS 16388 (DRAFT) Automatic Identification and End Capture - Bar Code Symbology and Specification - Code 39 ***CD-ROM ONLY****

IEC DIS 16390 (DRAFT) Automatic Identification and Data CaptureTechniques - Bar Code Symbology Specifications - Interleaved 2 of 5 ***CD-ROM ONLY***

IEC DIS 16448 (DRAFT) Information Technology - 120 mm DVD - Read-Only Disk ***CD-ROM ONLY***

IEC DIS 16449 (DRAFT) Information Technology - 80 mm DVD - Read-Only Disk ***CD-ROM ONLY***

IEC DIS 16969 (DRAFT) Information Technology - Data Interchangeon 120 mm Optical Disk Using +RW Format - Capacity: 3,0 Gbytes and 6,0 Gbytes ***CD-ROMONLY***

IEC 60027-1 Letter Symbols to Be Used in Electrical TechnologyPart 1: General Sixth Edition; CorrigendumApril-1993; Amendment 1 05-1997

IEC 60027-2 Letter Symbols to Be Used in ElectricalTechnology; Part 2: Telecommunications andElectronics First Edition; Supplement A-1975; Supplement B-1980; Amendment 1-1997

IEC 60027-3 Letter Symbols to Be Used in Electrical TechnologyPart 3: Logarithmic Quantities and Units SecondEdition

IEC 60027-4 Letter Symbols to Be Used in Electrical TechnologyPart 4: Symbols for Quantities to Be Used forRotating Electrical Machines First Edition

IEC 60028 International Standard of Resistance for CopperSecond Edition

IEC 60034-1 Rotating Electrical Machines - Part 1: Rating andPerformance Tenth Edition; Amendment 1-1997

IEC 60034-2 Rotating Electrical Machines Part 2: Methods forDetermining Losses and Efficiency of RotatingElectrical Machinery from Tests (Excluding Machinesfor Traction Vehicles) Measurement of Losses by theCalorimetric Method First Edition; SupplementA-1974; Amendment 1-1995; Amendment 2-1996

IEC 60034-3 Rotating Electrical Machines Part 3: SpecificRequirements for Turbine-Type Synchronous MachinesFourth Edition; Corrigendum-1997

IEC 60034-4 Rotating Electrical Machines Part 4: Methods forDetermining Synchronous Machine Quantities fromTests Second Edition; Amendment 1-1995

IEC 60034-5 Rotating Electrical Machines Part 5: Classificationof Degrees of Protection Provided by Enclosures ofRotating Electrical Machines (IP Code) ThirdEdition

IEC 60034-6 Rotating Electrical Machines Part 6: Methods ofCooling (IC Code) Second Edition

IEC 60034-7 Rotating Electrical Machines Part 7: Classificationof Types of Constructions and MountingArrangements (IM CODE) Second Edition

IEC 60034-8 Rotating Electrical Machines Part 8: TerminalMarkings and Direction of Rotation of RotatingMachines First Edition; Amendment 1-1990; Amendment2-1996


IEC 60034-9 Rotating Electrical Machines - Part 9: Noise LimitsThird Edition

IEC 60034-10 Rotating Electrical Machines Part 10: Conventionsfor Description of Synchronous Machines FirstEdition

IEC 60034-11 Rotating Electrical Machines Part 11: Built-InThermal Protection Chapter 1: Rules for Protectionof Rotating Electrical Machines First Edition

IEC 60034-11-2 Rotating Electrical Machines Part 11: Built-InThermal Protection Chapter 2: Thermal Detectors andControl Units Used in Thermal Protection SystemsFirst Edition; Amendment 1-1990

IEC 60034-11-3 Rotating Electrical Machines Part 11: Built-InThermal Protection Chapter 3: General Rules forThermal Protectors Used in Thermal ProtectionSystems First Edition

IEC 60034-12 Rotating Electrical Machines - Part 12: StartingPerformance of Single-Speed Three-Phase CageInduction Motors for Voltages up to and Including660 V First Edition; Amendment 1-1992; Amendment2-1995

IEC 60034-13 Rotating Electrical Machines Part 13: Specificationfor Mill Auxiliary Motors First Edition

IEC 60034-14 Rotating Electrical Machines - Part 14: MechanicalVibration of Certain Machines with Shaft Heights 56mm and Higher - Measurement, Evaluation and Limitsof Vibration Second Edition

IEC 60034-15 Rotating Electrical Machines Part 15: ImpulseVoltage Withstand Levels of Rotating A.C. Machineswith Form-Wound Stator Coils Second Edition

IEC 60034-16-1 Rotating Electrical Machines Part 16: ExcitationSystems for Synchronous Machines Chapter 1: Definitions First Edition; Corrigendum-1992

IEC 60034-16-2 Rotating Electrical Machines Part 16: ExcitationSystems for Synchronous Machines Chapter 2: Modelsfor Power System Studies First Edition

IEC TR 60034-16-3 Rotating Electrical Machines - Part 16: ExcitationSystems for Synchronous Machines - Section 3: Dynamic Performance First Edition

IEC 60034-17 Rotating Electrical Machines Part 17: Guide for theApplication of Cage Induction Motors When Fed fromConverters First Edition

IEC 60034-18-1 Functional Evaluation of Insulation Systems forRotating Electrical Machines Part 1: GeneralGuidelines First Edition; Corrigendum-1992; Amendment 1-1996

IEC 60034-18-21 Rotating Electrical Machines Part 18: FunctionalEvaluation of Insulation Systems Section 21: TestProcedures for Wire-Wound Windings - ThermalEvaluation and Classification First Edition; Amendment 1-1994; Amendment 2-1996

IEC TR 60034-18-22 Rotating Electrical Machines - Part 18: FunctionalEvaluation of Insulation Systems - Section 22: TestProcedures for Wire-Wound Windings - Classificationof Changes and Insulation Component SubstitutionsFirst Edition

IEC 60034-18-31 Rotating Electrical Machines Part 18: FunctionalEvaluation of Insulation Systems Section 31: TestProcedures for Form-Wound Windings - ThermalEvaluation and Classification of Insulation SystemsUsed in Machines up to and Including 50 mVA and 15kV First Edition; Amendment 1-1996

IEC TR 60034-18-32 Rotating Electrical Machines - Part 18: FunctionalEvaluation of Insulation Systems - Section 32: Test


Procedures for Form-Wound Windings - ElectricalEvaluation of Insulation Systems Used in Machinesup to and Including 50 MVA and 15 kV First Edition

IEC TR 60034-18-33 Rotating Electrical Machines - Part 18: FunctionalEvaluation of Insulation Systems - Section 33: TestProcedures for Form-Wound Windings - MultifactorFunctional Evaluation - Endurance under CombinedThermal and Electrical Stresses of InsulationSystems Used in Machines up to and Including 50 MVAand 15 kV First Edition

IEC 60034-19 Rotating Electrical Machines - Part 19: SpecificTest Methods for D.C. Machines on Conventional andRectifier-Fed Supplies First Edition

IEC 60034-22 Rotating Electrical Machines - Part 22: ACGenerators for Reciprocating Internal Combustion (RIC) Engine Driven Generating Sets First Edition

IEC 60038 IEC Standard Voltages Sixth Edition; Amendment1-1994; Amendment 2-1997

IEC 60041 Field Acceptance Tests to Determine the HydraulicPerformance of Hydraulic Turbines, Storage Pumpsand Pump-Turbines Third Edition; Corrigendum-1996

IEC 60044-1 Instrument Transformers - Part 1: CurrentTransformers First Edition; Cancels and ReplacesIEC 185: 1987

IEC 60044-2 Instrument Transformers - Part 2: Inductive VoltageTransformers First Edition

IEC 60044-3 Instrument Transformers Part 3: CombinedTransformers First Edition

IEC 60044-4 Instrument Transformers Part 4: Measurement ofPartial Discharges First Edition

IEC 60044-6 Instrument Transformers Part 6: Requirements forProtective Current Transformers for TransientPerformance First Edition

IEC 60045 Specification for Steam Turbines Third Edition IEC 60045-1 Steam Turbines Part 1: Specifications First Edition IEC 60050-101 International Electrotechnical Vocabulary Part

101: Mathematics Second Edition IEC 60050-713 International Electrotechnical Vocabulary - Part

713: Radiocommunications: Transmitters, Receivers, Networks and Operation First Edition

IEC 60050-807 International Electrotechnical Vocabulary - Part807: Digital Recording of Audio and Video SignalsFirst Edition

IEC 60050-821 International Electrotechnical Vocabulary Part821: Signalling and Security Apparatus for RailwaysPrepared by Joint IEC/UIC Working Group; Cancelsand Replaces IEC 60050-31: 1959

IEC 60050-891 International Electrotechnical Vocabulary Part891: Electrobiology First Edition

IEC 60050 CHAP 00 General Index of the International ElectrotechnicalVocabulary Second Edition

IEC 60050 CHAP 111 International Electrotechnical Vocabulary Chapter111: Physics and Chemistry Second Edition; Supersedes IEC 50 Chap 111-01: 1982, 50 Chap111-02: 1984 and 50 Chap 111-03: 1977

IEC 60050 CHAP 111-01 Advance Edition of the InternationalElectrotechnical Vocabulary Chapter 111: Physicsand Chemistry Section 111-01 - Physical ConceptsWithdrawn; Replaced by IEC 50 CHAP 111

IEC 60050 CHAP 111-02 Advance Edition of the InternationalElectrotechnical Vocabulary Chapter 111: Physicsand Chemistry Section 111-02 - ElectrochemicalConcepts Withdrawn; Replaced by IEC 50 Chap 111

IEC 60050 CHAP 111-03 Advance Edition of the International


Electrotechnical Vocabulary Chapter 111: Physicsand Chemistry Section 111-03 - Concepts Related toQuantities and Units Withdrawn; Replaced by IEC60050 Chap 111

IEC 60050 CHAP 121 International Electrotechnical Vocabulary Chapter121: Electromagnetism

IEC 60050 CHAP 131 International Electrotechnical Vocabulary Chapter131: Electric and Magnetic Circuits SupplementA-1982; Amendment 1-1984

IEC 60050 CHAP 151 International Electrotechnical Vocabulary Chapter151: Electrical and Magnetic Devices Amendment1-1987

IEC 60050 CHAP 161 International Electrotechnical Vocabulary Chapter161: Electromagnetic Compatibility First Edition; Amendment 1-1997; Amendment 2-1998

IEC 60050 CHAP 191 International Electrotechnical Vocabulary Chapter191: Dependability and Quality of Service FirstEdition

IEC 60050 CHAP 212 International Electrotechnical Vocabulary Chapter212: Insulating Solids, Liquids and Gases FirstEdition

IEC 60050 CHAP 221 International Electrotechnical Vocabulary Chapter221: Magnetic Materials and Components FirstEdition; Amendment 1-1993

IEC 60050 CHAP 301,302,303 Advance Edition of InternationalElectrotechnical Vocabulary Chapter 301: GeneralTerms on Measurements in Electricity Chapter 302: Electrical Measuring Instruments Chapter 303: Electronic Measuring Instruments

IEC 60050 CHAP 321 International Electrotechnical Vocabulary Chapter321: Instrument Transformers

IEC 60050 CHAP 351 International Electrotechnical Vocabulary Chapter351: Automatic Control First Edition; Amendment1-1978; Erratum-04/1979

IEC 60050 CHAP 371 International Electrotechnical Vocabulary Chapter371: Telecontrol Amendment 1-1997

IEC 60050 CHAP 391 International Electrotechnical Vocabulary Chapter391: Detection and Measurement of IonizingRadiation by Electric Means

IEC 60050 CHAP 392 International Electrotechnical Vocabulary Chapter392: Nuclear Instrumentation Supplement to Chapter391

IEC 60050 CHAP 393 International Electrotechnical Vocabulary Chapter393: Nuclear Instrumentation: Physical Phenomenaand Basic Concepts First Edition

IEC 60050 CHAP 394 International Electrotechnical Vocabulary Chapter394: Nuclear Instrumentation: Instruments FirstEdition; Amendment 1-1996

IEC 60050 CHAP 411 International Electrotechnical Vocabulary Chapter411: Rotating Machines Second Edition

IEC 60050 CHAP 421 International Electrotechnical Vocabulary Chapter421: Power Transformers and Reactors First Edition

IEC 60050 CHAP 426 International Electrotechnical Vocabulary Chapter426: Electrical Apparatus for Explosive AtmospheresFirst Edition

IEC 60050 CHAP 431 International Electrotechnical Vocabulary Chapter431: Transductors

IEC 60050 CHAP 436 International Electrotechnical Vocabulary Chapter436: Power Capacitors First Edition

IEC 60050 CHAP 441 International Electrotechnical Vocabulary Chapter441: Switchgear, Controlgear and Fuses SecondEdition

IEC 60050 CHAP 446 International Electrotechnical Vocabulary Chapter446: Electrical Relays


IEC 60050 CHAP 448 International Electrotechnical Vocabulary Chapter448: Power System Protection Second Edition

IEC 60050 CHAP 461 International Electrotechnical Vocabulary Chapter461: Electric Cables Amendment 1-1993

IEC 60050 CHAP 466 International Electrotechnical Vocabulary Chapter466: Overhead Lines First Edition

IEC 60050 CHAP 471 International Electrotechnical Vocabulary Chapter471: Insulators

IEC 60050 CHAP 481 International Electrotechnical Vocabulary Chapter481: Primary Cells and Batteries First Edition

IEC 60050 CHAP 486 International Electrotechnical Vocabulary Chapter486: Secondary Cells and Batteries First Edition

IEC 60050 CHAP 521 International Electrotechnical Vocabulary Chapter521: Semiconductor Devices and Integrated Circuits

IEC 60050 CHAP 531 International Electrotechnical Vocabulary Chapter531: Electronic Tubes First Edition

IEC 60050 CHAP 541 International Electrotechnical Vocabulary Chapter541: Printed Circuits First Edition

IEC 60050 CHAP 551 International Electrotechnical Vocabulary Chapter551: Power Electronics

IEC 60050 CHAP 561 International Electrotechnical Vocabulary; Chapter561: Piezoelectric Devices for Frequency Controland Selection; Section 561-07: Characteristics ofSurface Acoustic Wave (Saw) Devices First Edition; Amendment 1-1995; Amendment 2-1997

IEC 60050 CHAP 581 International Electrotechnical Vocabulary - Chapter581: Electromechanical Components for ElectronicEquipment Amendment 1 1998

IEC 60050 CHAP 601 International Electrotechnical Vocabulary - Chapter601: Generation, Transmission and Distribution ofElectricity - General Amendment 1 1998

IEC 60050 CHAP 602 International Electrotechnical Vocabulary Chapter602: Generation, Transmission and Distribution ofElectricity - Generation

IEC 60050 CHAP 603 International Electrotechnical Vocabulary Chapter603: Generation, Transmission and Distribution ofElectricity - Power System Planning and ManagementAmendment- 1998

IEC 60050 CHAP 604 International Electrotechnical Vocabulary Chapter604: Generation, Transmission and Distribution ofElectricity - Operation First Edition; Corrigendum-1987

IEC 60050 CHAP 605 International Electrotechnical Vocabulary Chapter605: Generation, Transmission and Distribution ofElectricity - Substations

IEC 60050 CHAP 691 International Electrotechnical Vocabulary Chapter691: Tariffs for Electricity First Edition

IEC 60050 CHAP 701 International Electrotechnical Vocabulary Chapter701: Telecommunications, Channels and Networks

IEC 60050 CHAP 702 International Electrotechnical Vocabulary Chapter702: Oscillations, Signals and Related DevicesFirst Edition; Erratum 2-1994

IEC 60050 CHAP 704 International Electrotechnical Vocabulary Chapter704: Transmission First Edition

IEC 60050 CHAP 705 International Electrotechnical Vocabulary Chapter705: Radio Wave Propagation First Edition

IEC 60050 CHAP 712 International Electrotechnical Vocabulary Chapter712: Antennas First Edition

IEC 60050 CHAP 714 International Electrotechnical Vocabulary Chapter714: Switching and Signalling in TelecommunicationsFirst Edition

IEC 60050 CHAP 715 International Electrotechnical Vocabulary Chapter715: Telecommunication Networks, Teletraffic andOperation First Edition


IEC 60050 CHAP 716-1 International Electrotechnical Vocabulary Chapter716-1: Integrated Services Digital Network (ISDN) Part 1: General Aspects First Edition

IEC 60050 CHAP 721 International Electrotechnical Vocabulary Chapter721: Telegraphy, Facsimile and Data CommunicationFirst Edition

IEC 60050 CHAP 722 International Electrotechnical Vocabulary Chapter722: Telephony First Edition

IEC 60050 CHAP 723 International Electrotechnical Vocabulary Chapter723: Broadcasting: Sound, Television, Data FirstEdition

IEC 60050 CHAP 725 International Electrotechnical Vocabulary Chapter725: Space Radiocommunications Second Edition

IEC 60050 CHAP 726 International Electrotechnical Vocabulary Chapter726: Transmission Lines and Waveguides

IEC 60050 CHAP 731 International Electrotechnical Vocabulary Chapter731: Optical Fibre Communication First Edition; Corrigendum-03/1992; Corrigendum-07/1992

IEC 60050 CHAP 801 International Electrotechnical Vocabulary Chapter801: Acoustics and Electroacoustics Second Edition

IEC 60050 CHAP 806 International Electrotechnical Vocabulary Chapter806: Recording and Reproduction of Audio and VideoSecond Edition

IEC 60050 CHAP 811 International Electrotechnical Vocabulary Chapter811: Electric Traction First Edition

IEC 60050 CHAP 826 International Electrotechnical Vocabulary Chapter826: Electrical Installations of Buildings FirstEdition; Amendment 1-1990; Amendment 2-1995

IEC 60050 CHAP 841 International Electrotechnical Vocabulary Chapter841: Industrial Electroheating

IEC 60050 CHAP 845 International Electrotechnical Vocabulary Chapter845: Lighting

IEC 60050 CHAP 851 International Electrotechnical Vocabulary Chapter851: Electric Welding First Edition

IEC 60050 CHAP 881 Advance Edition of the InternationalElectrotechnical Vocabulary Chapter 881: Radiologyand Radiological Physics

IEC 60050 CHAP 901 International Electrotechnical Vocabulary Chapter901: Magnetism First Edition; Supplement A-1975; Supplement B-1978

IEC 60050 GROUP 26 International Electrotechnical Vocabulary Group 26Nuclear Power Plants for Electric Energy GenerationSecond Edition

IEC 60051-1 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories - Part1: Definitions and General Requirements Common toAll Parts Fifth Edition

IEC 60051-2 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories Part2: Special Requirements for Ammeters and VoltmetersFourth Edition

IEC 60051-3 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories Part3: Special Requirements for Wattmeters andVarmeters Fourth Edition; Amendment 1-1994

IEC 60051-4 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories Part4: Special Requirements for Frequency Meters FourthEdition

IEC 60051-5 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories Part5: Special Requirements for Phase Meters, PowerFactor Meters and Synchroscopes Fourth Edition

IEC 60051-6 Direct Acting Indicating Analogue Electrical


Measuring Instruments and Their Accessories Part6: Special Requirements for Ohmmeters (ImpedanceMeters) and Conductance Meters Fourth Edition

IEC 60051-7 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories Part7: Special Requirements for Multi-FunctionInstruments Fourth Edition

IEC 60051-8 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories Part8: Special Requirements for Accessories FourthEdition

IEC 60051-9 Direct Acting Indicating Analogue ElectricalMeasuring Instruments and Their Accessories Part9: Recommended Test Methods Fourth Edition; Amendment 1-1994; Amendment 2-1995

IEC 60052 Recommendations for Voltage Measurement by Means ofSphere-Gaps (One Sphere Earthed) Second Edition

IEC 60055-1 Paper-Insulated Metal-Sheathed Cables for RatedVoltages up to 18/30 kV (with Copper or AluminiumConductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and theirAccessories Fifth Edition

IEC 60055-2 Paper-Insulated Metal-Sheathed Cables for RatedVoltages up to 18/30 kV (with Copper or AluminiumConductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 2: General and ConstructionRequirements First Edition; Amendment 1-1989

IEC 60056 High-Voltage Alternating-Current Circuit-BreakersFourth Edition; Corrigendum-04/1989; Amendment1-1992; Amendment 2-1995; Amendment 3-1996

IEC 60059 IEC Standard Current Ratings First Edition IEC 60060-1 High-Voltage Test Techniques Part 1: General

Definitions and Test Requirements Second Edition; Corrigendum-03/1990; Corrigendum-03/1992

IEC 60060-2 High-Voltage Test Techniques Part 2: MeasuringSystems Second Edition; (Amendment 1-1996)

IEC 60060-3 High-Voltage Test Techniques Part 3: MeasuringDevices First Edition

IEC 60060-4 High-Voltage Test Techniques Part 4: ApplicationGuide for Measuring Devices First Edition

IEC 60061-1 Lamp Caps and Holders Together with Gauges for theControl of Interchangeability and Safety - Part 1: Lamp Caps Third Edition; Amended in Accordance withSupplements: A-1970, B-1971, C-1972, D-1972, E-1972, F-1975, G-1977, H-1977, J-1980, K-1983, L-1987, M-1989, N-1992, P-1994, Q-1994, R-1995, S-1996, T-1996, U-1996, V-1997; Amendment 21-1998

IEC 60061-2 Lamp Caps and Holders Together with Gauges for theControl of Interchangeability and Safety - Part 2: Lampholders Third Edition; Amended in Accordancewith Supplements: A-1970, B-1971, C-1972, D-1975, E-1975, F-1980, G-1983, H-1987, J-1989, K-1992, L-1994, M-1994, N-1995, P-1996, Q-1996, R-1996, S-1997; Amendment 18: 1998

IEC 60061-3 Lamp Caps and Holders Together with Gauges for theControl of Interchangeability and Safety; Part 3: Gauges Third Edition; Errata; Amended in Accordancewith Supplements: A-1970, B-1971, C-1971, D-1972, E-1972, F-1975, G-1977, H-1980, J-1983, K-1987, L-1989, M-1992, N-1994, P-1994, Q-1995, R-1996, S-1996, T-1996 et/and U-1997; Amendment 20-1998

IEC 60061-4 Lamp Caps and Holders Together with Gauges for theControl of Interchangeability and Safety Part 4: Guidelines and General Information First Edition; Supplement A-1992; Supplement B-1994; Supplement


C-1994; Supplement D-1995; Amendment 5-1998 IEC 60062 Marking Codes for Resistors and Capacitors Fourth

Edition; Amendment 1-1995 IEC 60063 Preferred Number Series for Resistors and

Capacitors Second Edition; Amendment 1-1967; Amendment 2-1977

IEC 60064 Tungsten Filament Lamps for Domestic and SimilarGeneral Lighting Purposes; Performance RequirementsSixth Edition

IEC 60065 Safety Requirements for Mains Operated Electronicand Related Apparatus for Household and SimilarGeneral Use Fifth Edition; (Amendment 2-1989, Incorporating Amendment 1; Amendment 3-1992

IEC 60067 Dimensions of Electronic Tubes and Valves SecondEdition; Supplement A-1967; Supplement B-1969; Supplement C-1970; Supplement D-1977; SupplementE-1986

IEC 60068-1 Environmental Testing Part 1: General and GuidanceSixth Edition; Amendment 1-1992

IEC 60068-2-1 Environmental Testing Part 2: Tests - Tests A: ColdFifth Edition; Amendment 1-1993; Amendment 2-1994

IEC 60068-2-2 Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry Heat Fourth Edition; Supplement A-1976; Amendment 1-1993; Amendment2-1994

IEC 60068-2-3 Basic Environmental Testing Procedures Part 2: Tests - Test Ca: Damp Heat, Steady State ThirdEdition; Amendment 1-1984

IEC 60068-2-5 Basic Environmental Testing Procedures Part 2: Tests Test Sa: Simulated Solar Radiation at GroundLevel First Edition

IEC 60068-2-6 Environmental Testing - Part 2: Tests - Test FC: Vibration (Sinusoidal) Sixth Edition; Corrigendum-1995

IEC 60068-2-7 Basic Environmental Testing Procedures Part 2: Tests - Test Ga and Guidance: Acceleration, SteadyState Second Edition; Amendment 1-1986

IEC 60068-2-9 Basic Environmental Testing Procedures Part 2: Tests - Guidance for Solar Radiation Testing FirstEdition; Amendment 1-1984; Corrigendum-08/1989

IEC 60068-2-10 Basic Environmental Testing Procedures Part 2: Tests - Test J and Guidance: Mould Growth FifthEdition; Corrigendum-04/1989

IEC 60068-2-11 Basic Environmental Testing Procedures Part 2: Tests Test Ka: Salt Mist Third Edition

IEC 60068-2-13 Basic Environmental Testing Procedures Part 2: Tests Test M: Low Air Pressure Fourth Edition

IEC 60068-2-14 Basic Environmental Testing Procedures Part 2: Tests Test N: Change of Temperature Fifth Edition; Amendment 1-1986

IEC 60068-2-17 Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing Fourth Edition

IEC 60068-2-18 Environmental Testing Part 2: Tests - Test R andGuidance: Water First Edition; Corrigendum-05/1991Amendment 1-1993

IEC 60068-2-20 Basic Environmental Testing Procedures Part 2: Tests Test T: Soldering Fourth Edition; Amendment1-1986; Amendment 2-1987

IEC 60068-2-21 Basic Environmental Testing Procedures Part 2: Tests - Test U: Robustness of Terminations andIntegral Mounting Devices Fourth Edition; Amendment2-1991, Incorporating Amendment 1Corrigendum-11/1991 Amendment 3-1992

IEC 60068-2-27 Basic Environmental Testing Procedures Part 2:


Tests - Test Ea and Guidance: Shock Third Edition IEC 60068-2-28 Environmental Testing Part 2: Tests - Guidance for

Damp Heat Tests Third Edition IEC 60068-2-29 Basic Environmental Testing Procedures Part 2:

Tests - Tests Eb and Guidance: Bump SecondEdition; Corrigendum-10/1987

IEC 60068-2-30 Basic Environmental Testing Procedures Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle) Second Edition; Amendment1-1985

IEC 60068-2-31 Basic Environmental Testing Procedures Part 2: Tests - Test Ec: Drop and Topple, Primarily forEquipment- Type Specimens First Edition; Amendment1-1982;

IEC 60068-2-32 Basic Environmental Testing Procedures Part 2: Tests Test Ed: Free Fall Second Edition; Amendment2-1990, Incorporating Amendment 1

IEC 60068-2-33 Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature TestsFirst Edition; Amendment 1-1978

IEC 60068-2-34 Basic Environmental Testing Procedures Part 2: Tests Test Fd: Random Vibration Wide Band - GeneralRequirements First Edition; Amendment 1-1983; Corrigendum-10/1993

IEC 60068-2-35 Basic Environmental Testing Procedures Part 2: Tests Test Fda: Random Vibration Wide Band - Reproducibility High First Edition; Amendment1-1983; Corrigendum-10/1993

IEC 60068-2-36 Basic Environmental Testing Procedures Part 2: Tests - Test Fdb: Random Vibration Wide Band - Reproducibility Medium First Edition; Amendment1-1983; Corrigendum-10/1993

IEC 60068-2-37 Basic Environmental Testing Procedures Part 2: Tests - Test Fdc: Random Vibration Wide Band - Reproducibility Low First Edition; Amendment1-1983; Corrigendum-10/1993

IEC 60068-2-38 Basic Environmental Testing Procedures Part 2: Tests - Test Z/AD: Composite Temperature/HumidityCyclic Test First Edition

IEC 60068-2-39 Basic Environmental Testing Procedures Part 2: Tests - Test Z/AMD: Combined Sequential Cold, LowAir Pressure, and Damp Heat Test First Edition

IEC 60068-2-40 Basic Environmental Testing Procedures Part 2: Tests - Test Z/AM: Combined Cold/Low Air PressureTests First Edition; Amendment 1-1983

IEC 60068-2-41 Basic Environmental Testing Procedures Part 2: Tests - Test Z/BM: Combined Dry Heat/Low AirPressure Tests First Edition; Amendment 1-1983

IEC 60068-2-42 Basic Environmental Testing Procedures Part 2: Tests Test Kc: Sulphur Dioxide Test for Contactsand Connections Second Edition

IEC 60068-2-43 Basic Environmental Testing Procedures Part 2: Tests Test Kd: Hydrogen Sulphide Test for Contactsand Connections First Edition

IEC 60068-2-44 Environmental Testing - Part 2: Tests - Guidance onTest T: Soldering Second Edition; Corrigendum-08/1995

IEC 60068-2-45 Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in CleaningSolvents First Edition; Amendment 1-1993

IEC 60068-2-46 Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kd: Hydrogen Sulphide Testfor Contacts and Connections First Edition

IEC 60068-2-47 Basic Environmental Testing Procedures Part 2:


Tests Mounting of Components, Equipment and OtherArticles for Dynamic Tests Including Shock (Ea), Bump (Eb), Vibration (Fc and Fd) and Steady-StateAcceleration (Ga) and Guidance First Edition

IEC 60068-2-48 Basic Environmental Testing Procedures Part 2: Tests Guidance on the Application of the Tests ofIEC Publication 68 to Simulate the Effects ofStorage First Edition

IEC 60068-2-49 Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kc: Sulphur Dioxide Test forContacts and Connections First Edition

IEC 60068-2-50 Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating andNon-Heat Dissipating Specimens First Edition

IEC 60068-2-51 Basic Environmental Testing Procedures Part 2: Tests Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating andNon-Heat-Dissipating Specimens First Edition

IEC 60068-2-52 Environmental Testing - Part 2: Tests - Test Kb: Salt Mist, Cyclic (Sodium Chloride Solution) SecondEdition; Corrigendum-1996

IEC 60068-2-53 Basic Environmental Testing Procedures Part 2: Tests Guidance to Tests Z/AFc and Z/BFc: CombinedTemperature (Cold and Dry Heat) and Vibration (Sinusoidal) Tests First Edition

IEC 60068-2-54 Basic Environmental Testing Procedures Part 2: Tests Test Ta: Soldering Solderability Testing bythe Wetting Balance Method First Edition

IEC 60068-2-55 Basic Environmental Testing Procedures Part 2: Tests Test Ee and Guidance: Bounce First Edition; CENELEC EN 60068-2-55: 1993

IEC 60068-2-56 Environmental Testing Part 2: Tests - Test Cb: DampHeat, Steady State, Primarily for Equipment FirstEdition

IEC 60068-2-57 Environmental Testing Part 2: Test Methods TestFf: Vibration - Time-History Method First Edition

IEC 60068-2-58 Environmental Testing Part 2: Tests - Test Td: Solderability, Resistance to Dissolution ofMetallization and to Soldering Heat of SurfaceMounting Devices (SMD) First Edition

IEC 60068-2-59 Environmental Testing Part 2: Test Methods TestFe: Vibration - Sine-Beat Method First Edition

IEC 60068-2-60 Environmental Testing - Part 2: Tests - Test Ke: Flowing Mixed Gas Corrosion Test Second Edition

IEC 60068-2-61 Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence First Edition

IEC 60068-2-64 Environmental Testing Part 2: Test Methods TestFh: Vibration, Broad-Band Random (Digital Control) and Guidance First Edition; Corrigendum-10/1993

IEC 60068-2-65 Environmental Testing - Part 2: Methods of Test - Test Fg: Vibration, Acoustically Induced FirstEdition

IEC 60068-2-66 Environmental Testing - Part 2: Test Methods - TestCx: Damp Heat, Steady State (UnsaturatedPressurized Vapour) First Edition

IEC 60068-2-67 Environmental Testing - Part 2: Tests - Test Cy: Damp Heat, Steady State, Accelerated Test PrimarilyIntended for Components First Edition

IEC 60068-2-68 Environmental Testing - Part 2: Tests - Test L: Dust and Sand First Edition

IEC 60068-2-69 Environmental Testing - Part 2: Tests - Test Te: Solderability Testing of Electronic Components forSurface Mount Technology by the Wetting Balance


Method First Edition IEC 60068-2-70 Environmental Testing - Part 2: Tests - Test Xb:

Abrasion of Markings and Letterings Caused byRubbing of Fingers and Hands First Edition

IEC 60068-2-75 Environmental Testing - Part 2: Tests - Test Eh: Hammer Tests First Edition

IEC 60068-3-1 Basic Environmental Testing Procedures Part 3: Background Information Section One - Cold and DryHeat Tests First Edition; Supplement A-1978; Corrigenda-03/1980

IEC 60068-3-2 Basic Environmental Testing Procedures Part 3: Background Information Section Two-CombinedTemperature/Low Air Pressure Tests First Edition

IEC 60068-3-3 Environmental Testing Part 3: Guidance Seismic TestMethods for Equipments First Edition

IEC 60068-4 Basic Environmental Testing Procedures Part 4: Information for Specification Writers - TestSummaries First Edition; Amendment 1-1992; Amendment 2-1994

IEC 60068-5-1 Environmental Testing Part 5: Guide to Drafting ofTest Methods - General Principles First Edition

IEC 60068-5-2 Environmental Testing Part 5: Guide to Drafting ofTest Methods - Terms and Definitions First Edition

IEC 60071-1 Insulation Co-Ordination Part 1: Definitions, Principles and Rules Seventh Edition; Cancels andReplaces IEC 71-3: 1982

IEC 60071-2 Insulation Co-Ordination - Part 2: ApplicationGuide Third Edition

IEC 60071-3 Insulation Co-Ordination Part 3: Phase-To-PhaseInsulation Co-Ordination Principles, Rules andApplication Guide First Edition; Replaced by IEC71-1: 1993

IEC 60072-1 Dimensions and Output Series for RotatingElectrical Machines Part 1: Frame Numbers 56 to 400and Flange Numbers 55 to 1080 Sixth Edition; Incorporating Amendments 1 and 2

IEC 60072-2 Dimensions and Output Series for RotatingElectrical Machines Part 2: Frame Numbers 355 to 1000 and Flange Numbers 1 180 to 2 360 First Edition

IEC 60072-3 Dimensions and Output Series for RotatingElectrical Machines - Part 3: Small Built-InMotors - Flange Numbers BF10 to BF50 First Edition

IEC 60073 Basic and Safety Principles for Man-MachineInterface, Marking and Identification - CodingPrinciples for Indication Devices and ActuatorsFifth Edition

IEC 60076-1 Power Transformers; Part 1: General SecondEdition; Corrigendum-1997

IEC 60076-2 Power Transformers; Part 2: Temperature Rise SecondEdition; Corrigendum-1997

IEC 60076-3 Power Transformers Part 3: Insulation Levels andDielectric Tests First Edition; (Amendment 1-1981)

IEC 60076-3-1 Power Transformers Part 3: Insulation Levels andDielectric Tests External Clearances in Air FirstEdition

IEC 60076-4 Power Transformers Part 4: Tappings and ConnectionsFirst Edition

IEC 60076-5 Power Transformers Part 5: Ability to WithstandShort Circuit First Edition; (Amendment 1-1979) (Amendment 2-1994)

IEC 60076-8 Power Transformers - Application Guide FirstEdition; Replaces IEC 60606: 1978

IEC 60077 Rules for Electric Traction Equipment SecondEdition


IEC 60078 Characteristic Impedances and Dimensions of Radio-Frequency Coaxial-Cables Third Edition

IEC 60079-0 Electrical Apparatus for Explosive Gas Atmospheres - Part 0: General Requirements Third Edition

IEC 60079-1 Electrical Apparatus for Explosive Gas AtmospheresPart 1: Construction and Verification Test ofFlameproof Enclosures of Electrical Apparatus ThirdEdition; Amendment 1-1993; Supplement A-1982; Amendment 2-1998

IEC 60079-2 Electrical Apparatus for Explosive Gas AtmospheresPart 2: Electrical Apparatus - Type of Protection "P" Third Edition

IEC 60079-3 Electrical Apparatus for Explosive Gas AtmospheresPart 3: Spark-Test Apparatus for Intrinsically-SafeCircuits Third Edition

IEC 60079-4 Electrical Apparatus for Explosive Gas AtmospheresPart 4: Method of Test for Ignition TemperatureSecond Edition; Supplement A-1966; Amendment 1-1995

IEC 60079-5 Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling "Q" Second Edition

IEC 60079-6 Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion "o" Second Edition

IEC 60079-7 Electrical Apparatus for Explosive Gas AtmospheresPart 7: Increased Safety "E" Second Edition; Amendment 1-1991; Amendment 2-1993

IEC 60079-10 Electrical Apparatus for Explosive Gas AtmospheresPart 10: Classification of Hazardous Areas ThirdEdition; Corrigendum-1996

IEC 60079-11 Electrical Apparatus for Explosive Gas AtmospheresPart 11: Intrinsic Safety "i" Third Edition

IEC 60079-12 Electrical Apparatus for Explosive Gas AtmospheresPart 12: Classification of Mixtures of Gases orVapours with Air According to Their MaximumExperimental Safe Gaps and Minimum IgnitingCurrents First Edition

IEC 60079-13 Electrical Apparatus for Explosive Gas AtmospheresPart 13: Construction and Use of Rooms or BuildingsProtected by Pressurization First Edition

IEC 60079-14 Electrical Apparatus for Explosive Gas Atmospheres - Part 14: Electrical Installations in HazardousAreas (Other Than Mines) Second Edition

IEC 60079-15 Electrical Apparatus for Explosive Gas AtmospheresPart 15: Electrical Apparatus with Type ofProtection "N" First Edition

IEC 60079-16 Electrical Apparatus for Explosive Gas AtmospheresPart 16: Artificial Ventilation for the Protectionof Analyzer(s) Houses First Edition

IEC 60079-17 Electrical Apparatus for Explosive Gas Atmospheres - Part 17: Inspection and Maintenance of ElectricalInstallations in Hazardous Areas (Other ThanMines) Second Edition

IEC 60079-18 Electrical Apparatus for Explosive Gas AtmospheresPart 18: Encapsulation "m" First Edition

IEC 60079-19 Electrical Apparatus for Explosive Gas AtmospheresPart 19: Repair and Overhaul for Apparatus Used inExplosive Atmospheres (Other Than Mines orExplosives) First Edition

IEC 60079-20 Electrical Apparatus for Explosive Gas Atmospheres - Part 20: Data for Flammable Gases and Vapours, Relating to the Use of Electrical Apparatus FirstEdition

IEC 60080 Fixed Capacitors for Direct Current UsingImpregnated Paper or Paper/Plastic Film DielectricSecond Edition


IEC 60081 Double-Capped Fluorescent Lamps - PerformanceSpecifications Fifth Edition

IEC 60082 Ballasts for Tubular Fluorescent Lamps FifthEdition; Amendment 1-1986

IEC TR 60083 Plugs and Socket-Outlets for Domestic and SimilarGeneral Use Standardized in Member Countries of IECThird Edition

IEC 60085 Thermal Evaluation and Classification of ElectricalInsulation Second Edition

IEC 60086-1 Primary Batteries - Part 1: General Eighth Edition IEC 60086-2 Primary Batteries - Part 2: Specification Sheets

Ninth Edition IEC 60086-4 Primary Batteries - Part 4: Safety Standard for

Lithium Batteries First Edition IEC 60090 Dimensions of Plugs for Hearing Aids Second Edition IEC 60092-3 Electrical Installations in Ships; Part 3: Cables

[Construction, Testing and Installations] SecondEdition; Amendment 1-1969; Amendment 2-1971; Amendment 3-1973; Amendment 4-1974; Amendment5-1979; Amendment 6-1984

IEC 60092-101 Electrical Installations in Ships - Part 101: Definitions and General Requirements FourthEdition; (Amendment 1-1995) (Corrigendum-1996)

IEC 60092-201 Electrical Installations in Ships - Part 201: System Design - General Fourth Edition

IEC 60092-202 Electrical Installations in Ships - Part 202: System Design - Protection Fourth Edition; (Amendment 1-1996)

IEC 60092-203 Electrical Installations in Ships Part 203: SystemDesign - Acoustic and Optical Signals First Edition

IEC 60092-204 Electrical Installations in Ships Part 204: SystemDesign - Electric and Electrohydraulic SteeringGear Third Edition

IEC 60092-301 Electrical Installations in Ships Part 301: Equipment - Generators and Motors Third Edition; (Amendment 1-1994) (Amendment 2-1995)

IEC 60092-302 Electrical Installations in Ships - Part 302: Low-Voltage Switchgear and Controlgear AssembliesFourth Edition

IEC 60092-303 Electrical Installations in Ships Part 303: Equipment - Transformers for Power and LightingThird Edition; Amendment 1- 1997

IEC 60092-304 Electrical Installations in Ships Part 304: Equipment - Semiconductor Convertors ThirdEdition; (Amendment 1-1995)

IEC 60092-305 Electrical Installations in Ships Part 305: Equipment - Accumulator (Storage) Batteries ThirdEdition; (Amendment 1-1989)

IEC 60092-306 Electrical Installations in Ships Part 306: Equipment - Luminaires and Accessories ThirdEdition

IEC 60092-307 Electrical Installations in Ships Part 307: Equipment - Heating and Cooking Appliances ThirdEdition

IEC 60092-350 Electrical Installations in Ships Part 350: Low-Voltage Shipboard Power Cables General Constructionand Test Requirements First Edition; Amendment1-1994

IEC 60092-351 Electrical Installations in Ships; Part 351: Insulating Materials for Shipboard Power CablesFirst Edition; Amendment 1-1992; Amendment 2-1997

IEC 60092-352 Electrical Installations in Ships - Choice andInstallation of Cables for Low-Voltage PowerSystems Second Edition; Amendment 1-1997


IEC 60092-353 Electrical Installations in Ships - Part 353: Single and Multicore Non-Radial Field Power Cableswith Extruded Solid Insulation for Rated Voltages 1kV and 3 kV Second Edition

IEC 60092-354 Electrical Installations in Ships - Part 354: Single- and Three-Core Power Cables with ExtrudedSolid Insulation for Rated Voltages 6 kV, 10 kV and15 kV First Edition

IEC 60092-359 Electrical Installations in Ships Part 359: Sheathing Materials for Shipboard Power andTelecommunication Cables First Edition; Amendment1-1994; Corrigendum-1995

IEC 60092-373 Shipboard Telecommunication Cables and Radio-Frequency Cables Shipboard Flexible Coaxial CablesFirst Edition

IEC 60092-374 Shipboard Telecommunication Cables and Radio-Frequency Cables Telephone Cables for Non-EssentialCommunication Services First Edition

IEC 60092-375 Shipboard Telecommunication Cables and Radio-Frequency Cables General Instrumentation, Controland Communication Cables First Edition

IEC 60092-376 Electrical Installations in Ships Part 376: Shipboard Multicore Cables for Control CircuitsFirst Edition

IEC TR 60092-390 Electrical Installations in Ships - Part 390: CablePenetrations - Fire Type Test Procedure FirstEdition

IEC 60092-401 Electrical Installations in Ships - Part 401: Installation and Test of Completed InstallationThird Edition; Amendment 1-1987; Amendment 2-1997

IEC 60092-501 Electrical Installations in Ships Part 501: SpecialFeatures - Electric Propulsion Plant Third Edition

IEC 60092-502 Electrical Installations in Ships - Part 502: Tankers - Special Features Fourth Edition

IEC 60092-503 Electrical Installations in Ships Special FeaturesA.C. Supply Systems with Voltages in the RangeAbove 1 kV up to and Including 11 kV First Edition

IEC 60092-504 Electrical Installations in Ships Part 504: SpecialFeatures - Control and Instrumentation SecondEdition

IEC 60092-505 Electrical Installations in Ships Part 505: SpecialFeatures - Mobile Offshore Drilling Units ThirdEdition; (Amendment 1-1993)

IEC 60092-506 Electric Installations in Ships - Part 506: SpecialFeatures - Ships Carrying Specific Dangerous Goodsand Materials Hazardous Only in Bulk First Edition

IEC 60093 Methods of Test for Volume Resistivity and SurfaceResistivity of Solid Electrical InsulatingMaterials Second Edition

IEC 60094-1 Magnetic Tape Sound Recording and ReproducingSystems Part 1: General Conditions and RequirementsFourth Edition; Amendment 1-1994

IEC 60094-2 Magnetic Tape Recording and Reproducing Systems - Part 2: Calibration Tapes Second Edition; Corrigendum-1995

IEC 60094-3 Magnetic Tape Sound Recording and ReproducingSystems Part 3: Methods of Measuring theCharacteristics of Recording and ReproducingEquipment for Sound on Magnetic Tape FirstEdition; Amendment 2-1988; Amendment 3-1996

IEC 60094-4 Magnetic Tape Sound Recording and ReproducingSystems Part 4: Mechanical Magnetic Tape PropertiesFirst Edition; Amendment 1-1994

IEC 60094-5 Magnetic Tape Sound Recording and Reproducing


Systems Part 5: Electrical Magnetic Tape PropertiesFirst Edition; Amendment 1-1996

IEC 60094-6 Magnetic Tape Sound Recording and ReproducingSystems Part 6: Reel-to-Reel Systems First Edition

IEC 60094-7 Magnetic Tape Sound Recording and ReproducingSystems - Part 7: Cassette for Commercial TapeRecords and Domestic Use First Edition; Amendment1-1996

IEC 60094-8 Magnetic Tape Sound Recording and ReproducingSystems Part 8: Eight-Track Magnetic Tape Cartridgefor Commercial Tape Records and Domestic Use FirstEdition

IEC 60094-9 Magnetic Tape Sound Recording and ReproducingSystems Part 9: Magnetic Tape Cartridge forProfessional Use First Edition

IEC 60094-10 Magnetic Tape Sound Recording and ReproducingSystems Part 10: Time and Address Codes FirstEdition

IEC 60094-11 Magnetic Tape Sound Recording and ReproducingSystems Part 11: Address Code for Compact CassettesFirst Edition

IEC 60095-1 Lead-Acid Starter Batteries Part 1: GeneralRequirements and Methods of Test Fifth Edition; Corrigendum-1990; Amendment 1-1993; Amendment2-1995

IEC 60095-2 Lead-Acid Starter Batteries Part 2: Dimensions ofBatteries and Dimensions and Marking of TerminalsThird Edition; Amendment 1-1991; Amendment 2-1993

IEC 60095-4 Lead-Acid Starter Batteries Part 4: Dimensions ofBatteries for Heavy Trucks First Edition; Amendment1-1996

IEC 60096-0-1 Radio-Frequency Cables Part 0: Guide to the Designof Detail Specifications Section 1 - Coaxial CablesSecond Edition

IEC 60096-1 Radio-Frequency Cables Part 1: General Requirementsand Measuring Methods Fourth Edition; Amendment2-1993, Incorporating Amendment 1

IEC 60096-2 Radio-Frequency Cables Part 2: Relevant CableSpecifications First Edition; Consolidated ReprintConsisting of Publication 96-2 and Supplements96-2A: 1965, 96-2B: 1966, 96-2C: 1976, 96-2D: 1986; Amendment 1-1990; Corrigendum-04 1993; Corrigendum

IEC 60096-3 Radio-Frequency Cables Part 3: General Requirementsand Tests for Single-Unit Coaxial Cables for Use inCabled Distribution Systems First Edition

IEC 60096-4-1 Radio-Frequency Cables Part 4: Specification forSuperscreened Cables Section 1 - GeneralRequirements and Test Methods First Edition

IEC 60097 Grid System for Printed Circuits Fourth Edition IEC 60098 Analogue Audio Disk Records and Reproducing

Equipment Third Edition IEC 60099-1 Surge Arresters Part 1: Non-Linear Resistor Type

Gapped Surge Arresters for A.C. Systems ThirdEdition; Supplement A is Replaced by IEC 99-5

IEC 60099-3 Surge Arresters Part 3: Artificial PollutionTesting of Surge Arresters First Edition

IEC 60099-4 Surge Arresters - Part 4: Metal-Oxide SurgeArresters without Gaps for A.C. Systems FirstEdition; Amendment 1 1998

IEC 60099-5 Surge Arresters - Part 5: Selection and ApplicationRecommendations First Edition; Replaces IEC 99-1Supplement A

IEC 60100 Methods for the Measurement of Direct


Interelectrode Capacitances of Electronic Tubes andValves Second Edition; (Amendment 1-1969)

IEC 60104 Aluminium-Magnesium-Silicon Alloy Wire for OverheadLine Conductors Second Edition

IEC 60105 Recommendation for Commercial-Purity AluminiumBusbar Material First Edition

IEC 60107-1 Methods of Measurement on Receivers for TelevisionBroadcast Transmissions - Part 1: GeneralConsiderations - Measurements at Radio and VideoFrequencies Third Edition

IEC 60107-2 Methods of Measurement on Receivers for TelevisionBroadcast Transmissions - Part 2: Audio Channels - General Methods and Methods for MonophonicChannels Second Edition; BS EN 60107-2: 1997

IEC 60107-3 Recommended Methods of Measurement on Receivers forTelevision Broadcast Transmissions Part 3: Electrical Measurements on Multichannel SoundTelevision Receivers Using Subcarrier Systems FirstEdition

IEC 60107-4 Recommended Methods of Measurement on Receivers forTelevision Broadcast Transmissions Part 4: Electrical Measurements on Multichannel SoundTelevision Receivers Using the Two-Carrier FM-System First Edition

IEC 60107-5 Recommended Methods of Measurement on Receivers forTelevision Broadcast Transmissions Part 5: Electrical Measurements on Multichannel SoundTelevision Receivers Using the NICAM Two-ChannelDigital Sound-System First Edition

IEC 60107-6 Recommended Methods of Measurement on Receivers forTelevision Broadcast Transmissions Part 6: Measurement under Conditions Different fromBroadcast Signal Standards First Edition

IEC 60107-7 Methods of Measurement on Receivers for Television - Part 7: HDTV Displays First Edition

IEC 60107-8 Recommended Methods of Measurement on Receivers forTelevision Broadcast Transmissions - Part 8: Measurements on D2-MAC/Packet Equipment FirstEdition

IEC 60110 Recommendation for Capacitors for Inductive HeatGenerating Plants Operating at Frequencies between40 and 24000 Hz Second Edition

IEC 60112 Method for Determining the Comparative and theProof Tracking Indices of Solid InsulatingMaterials under Moist Conditions Third Edition

IEC 60114 Recommendation for Heat-Treated Aluminium AlloyBusbar Material of the Aluminium-Magnesium-SiliconType First Edition; Corrigendum

IEC 60115-1 Fixed Resistors for Use in Electronic EquipmentPart 1: Generic Specification Second Edition; Amendment 2-1987, Incorporating Amendment 1; Amendment 3-1989; Amendment 4-1993; IECQ QC 400000

IEC 60115-2 Fixed Resistors for Use in Electronic EquipmentPart 2: Sectional Specification: Fixed Low-PowerNon-Wirewound Resistors Second Edition; IECQ QC400100

IEC 60115-2-1 Fixed Resistors for Use in Electronic EquipmentPart 2: Blank Detail Specification: Fixed Low-PowerNon-Wirewound Resistors Assessment Level E FirstEdition; (IECQ QC 400101)

IEC 60115-2-2 Fixed Resistors for Use in Electronic EquipmentPart 2: Blank Detail Specification: Fixed Low-PowerNon-Wirewound Resistors Assessment Level F FirstEdition; (IECQ QC 400102)


IEC 60115-4 Fixed Resistors for Use in Electronic EquipmentPart 4: Sectional Specification: Fixed PowerResistors Second Edition; (Amendment 1-1993) (IECQQC 400200)

IEC 60115-4-1 Fixed Resistors for Use in Electronic EquipmentPart 4: Blank Detail Specification: Fixed PowerResistors Assessment Level E First Edition; (Amendment 1-1993) (IECQ QC 400201)

IEC 60115-4-2 Fixed Resistors for Use in Electronic EquipmentPart 4: Blank Detail Specification: Fixed PowerResistors Assessment Level F First Edition; (IECQQC 400202)

IEC 60115-4-3 Fixed Resistors for Use in Electronic EquipmentPart 4: Blank Detail Specification: Fixed PowerResistors, Heat-Sink Types Assessment Level H FirstEdition; IECQ QC 400203

IEC 60115-4-101 Fixed Resistors for Use in Electronic EquipmentPart 4: Detail Specification: Fixed Power WirewoundResistors with Solderable Axial Wire Leads - Stability Class 5 % - Assessment Level E FirstEdition; (IECQ QC 400201XX0001)

IEC 60115-4-102 Fixed Resistors for Use in Electronic EquipmentPart 4: Detail Specification: Fixed Power WirewoundResistors with Solderable Axial Wire Leads - Stability Class 1 % - Assessment Level E FirstEdition; (IECQ QC 400201XX0002)

IEC 60115-5 Fixed Resistors for Use in Electronic EquipmentPart 5: Sectional Specification: Fixed PrecisionResistors Second Edition; (IECQ QC 400300)

IEC 60115-5-1 Fixed Resistors for Use in Electronic EquipmentPart 5: Blank Detail Specification: Fixed PrecisionResistors Assessment Level E First Edition; (IECQQC 400301)

IEC 60115-5-2 Fixed Resistors for Use in Electronic EquipmentPart 5: Blank Detail Specification: Fixed PrecisionResistors Assessment Level F First Edition; (IECQQC 400302)

IEC 60115-5-101 Fixed Resistors for Use in Electronic EquipmentPart 5: Detail Specification: Fixed PrecisionWirewound Resistors with Solderable Axial WireLeads - Stability Class 0,1% - Assessment Level EFirst Edition; (IECQ QC 400301XX0001)

IEC 60115-6 Fixed Resistors for Use in Electronic EquipmentPart 6: Sectional Specification: Fixed ResistorNetworks with Individually Measurable ResistorsFirst Edition; (Amendment 1-1987) (IECQ QC 400400)

IEC 60115-6-1 Fixed Resistors for Use in Electronic EquipmentPart 6: Blank Detail Specification: Fixed ResistorNetworks with Individually Measurable Resistors, All of Equal Value and Equal Dissipation AssessmentLevel E First Edition; (IECQ QC 400401)

IEC 60115-6-2 Fixed Resistors for Use in Electronic EquipmentPart 6: Blank Detail Specification: Fixed ResistorNetworks with Individually Measurable Resistors, ofEither Different Resistance Values or DifferentRated Dissipations Assessment Level E First Edition

IEC 60115-6-101 Fixed Resistors for Use in Electronic EquipmentPart 6: Detail Specification: Fixed Thick FilmResistor Networks with Individually MeasurableResistors, All of Equal Value and EqualDissipation, Class 1 (Dual-In-Line Network) FirstEdition

IEC 60115-6-102 Fixed Resistors for Use in Electronic EquipmentPart 6: Detail Specification: Fixed Thick FilmResistor Networks with Individually Measurable


Resistors, All of Equal Value and EqualDissipation, Class 1 (Single-In-Line Network) FirstEdition

IEC 60115-7 Fixed Resistors for Use in Electronic EquipmentPart 7: Sectional Specification: Fixed ResistorNetworks in Which Not All Resistors AreIndividually Measurable First Edition; (IECQ QC400500)

IEC 60115-7-1 Fixed Resistors for Use in Electronic EquipmentPart 7: Blank Detail Specification: Fixed ResistorNetworks in Which Not All Resistors AreIndividually Measurable Assessment Level E FirstEdition; (IECQ QC 400501)

IEC 60115-8 Fixed Resistors for Use in Electronic EquipmentPart 8: Sectional Specification: Fixed ChipResistors First Edition; (IECQ QC 400600)

IEC 60115-8-1 Fixed Resistors for Use in Electronic EquipmentPart 8: Blank Detail Specification: Fixed ChipResistors. Assessment Level E First Edition; IECQQC 400601

IEC 60118-0 Hearing Aids Part 0: Measurement ofElectroacoustical Characteristics Second Edition; Amendment 1-1994

IEC 60118-1 Hearing Aids - Part 1: Hearing Aids with InductionPick-Up Coil Input Third Edition

IEC 60118-2 Hearing Aids Part 2: Hearing Aids with AutomaticGain Control Circuits Second Edition; Amendment 102-1993; Amendment 2 05-1997

IEC 60118-3 Hearing Aids Part 3: Hearing Aid Equipment NotEntirely Worn on the Listener Second Edition

IEC 60118-4 Hearing Aids - Part 4: Magnetic Field Strength inAudio-Frequency Induction Loops for Hearing AidPurposes First Edition; Amendment 1-1998

IEC 60118-5 Hearing Aids Part 5: Nipples for Insert EarphonesFirst Edition

IEC 60118-6 Hearing Aids Part 6: Characteristics of ElectricalInput Circuits for Hearing Aids First Edition

IEC 60118-7 Hearing Aids Part 7: Measurement of the PerformanceCharacteristics of Hearing Aids for QualityInspection for Delivery Purposes First Edition; Amendment 1-1994

IEC 60118-8 Hearing Aids Part 8: Methods of Measurement ofPerformance Characteristics of Hearing Aids UnderSimulated In Situ Working Conditions First Edition

IEC 60118-9 Hearing Aids Part 9: Methods of Measurement ofCharacteristics of Hearing Aids with Bone VibratorOutput First Edition

IEC 60118-10 Hearing Aids Part 10: Guide to Hearing AidStandards First Edition

IEC 60118-11 Hearing Aids Part 11: Symbols and Other Markings onHearing Aids and Related Equipment First Edition

IEC 60118-12 Hearing Aids - Part 12: Dimensions of ElectricalConnector Systems First Edition; Cancels andReplaces IEC 90: 1973

IEC 60118-13 Hearing Aids - Part 13: ElectromagneticCompatibility (EMC) First Edition

IEC 60118-14 Hearing Aids - Part 14: Specification of a DigitalInterface Device First Edition

IEC 60119 Recommendations for Polycrystalline SemiconductorRectifier Stacks and Equipments First Edition

IEC 60120 Dimensions of Ball and Socket Couplings of StringInsulator Units Third Edition; Corrigendum-05/1989

IEC 60121 Recommendation for Commercial Annealed AluminiumElectrical Conductor Wire First Edition


IEC 60122-2 Quartz Crystal Units for Frequency Control andSelection Part 2: Guide to the Use of QuartzCrystal Units for Frequency Control and SelectionSecond Edition

IEC 60122-2-1 Quartz Crystal Units for Frequency Control andSelection Part 2: Guide to the Use of QuartzCrystal Units for Frequency Control and Selection - Section One: Quartz Crystal Units forMicroprocessor Clock Supply First Edition; (Amendment 1-1994)

IEC 60122-3 Quartz Crystal Units for Frequency Control andSelection Part 3: Standard Outlines and LeadConnections Second Edition; Supplement A-1979; Supplement B-1980; Supplement C-1981; SupplementD-1989; Amendment 2-1991, Incorporating Amendment1; Amendment 3-1992; Amendment 4-1993

IEC 60126 IEC Reference Coupler for the Measurement ofHearing Aids Using Earphones Coupled to the Ear byMeans of Ear Inserts Second Edition

IEC 60127-1 Miniature Fuses Part 1: Definitions for MiniatureFuses and General Requirements for Miniature Fuse-Links First Edition; Corrigendum-03/1990

IEC 60127-2 Miniature Fuses Part 2: Cartridge Fuse-Links FirstEdition; Amendment 1-1995; CENELEC EN 60 127-2: 1991

IEC 60127-3 Miniature Fuses Part 3: Sub-Miniature Fuse-LinksSecond Edition; Amendment 1-1991; Corrigendum-10/1994; Corrigendum-06/1996

IEC 60127-4 Miniature Fuses - Part 4: Universal Modular Fuse-Links (UMF) Second Edition

IEC 60127-5 Miniature Fuses Part 5: Guidelines for QualityAssessment of Miniature Fuse-Links First Edition

IEC 60127-6 Miniature Fuses - Part 6: Fuse-Holders forMiniature Cartridge Fuse-Links First Edition; Amendment 1-1996

IEC 60129 Alternating Current Disconnectors and EarthingSwitches Third Edition; Amendment 1-1993; Amendment2-1996

IEC 60130-0 Connectors for Frequencies Below 3 MHz Part 0: Guide to Drawing Information in DetailSpecifications First Edition; Errata-06/1971

IEC 60130-1 Connectors for Frequencies Below 3 MHz Part 1: General Requirements and Measuring Methods SecondEdition

IEC 60130-2 Connectors for Frequencies Below 3 MHz Part 2: Connectors for Radio Receivers and Associated SoundEquipment Second Edition; (Amendment 1-1969)

IEC 60130-3 Connectors for Frequencies Below 3 MHz (Mc/s) Part3: Battery Connectors First Edition; Corrigendum-01/1993

IEC 60130-4 Connectors for Frequencies Below 3 MHz Part 4: Circular Multipole Connectors with ThreadedCoupling First Edition; Supplement A-1970

IEC 60130-5 Connectors for Frequencies Below 3 MHz (Mc/s) Part5: Rectangular Multipole Connectors with BladeContacts First Edition

IEC 60130-6 Connectors for Frequencies Below 3 MHz (Mc/s) Part6: Rectangular Miniature Multipole Connectors withBlade Contacts First Edition

IEC 60130-7 Connectors for Frequencies Below 3 MHz Part 7: Circular Multipole Connectors with Bayonet or Push-Pull Coupling First Edition

IEC 60130-8 Connectors for Frequencies Below 3 MHz Part 8: Concentric Connectors for Audio Circuits in Radio


Receivers Second Edition IEC 60130-9 Connectors for Frequencies Below 3 MHz Part 9:

Circular Connectors for Radio and Associated SoundEquipment Second Edition; (Amendment 1-1993) (Amendment 2-1995)

IEC 60130-10 Connectors for Frequencies Below 3 MHz Part 10: Connectors for Coupling an External Low-VoltagePower Supply to Portable Entertainment EquipmentFirst Edition

IEC 60130-11 Connectors for Frequencies Below 3 MHz Part 11: Edge Socket Connectors with Closed Ends and Havinga Contact Spacing of 2.54 mm (0.1 in) Mating Eitherwith Board Mounted Connectors or Printed WiringBoards with Edge Board Contacts Multi-Row BoardMounted Printed Circuit Connectors Having Contactand Termination Spacing on a 2.54 mm (0.1 in) Square Grid First Edition; (Supplement A-1975)

IEC 60130-12 Connectors for Frequencies Below 3 MHz Part 12: Link and Test Connectors Second Edition

IEC 60130-15 Connectors for Frequencies Below 3 MHz Part 15: Ultra-Miniature Board-Mounted Printed-WiringConnectors Having Staggered Contact Spacing of 1.27mm (0.05 in) First Edition

IEC 60130-16 Connectors for Frequencies Below 3 MHz Part 16: Printed Circuit Board Mounted Connectors with TwoRows of Staggered Contacts and Terminations withSpacing of 2.54 mm (0.1 in) First Edition

IEC 60130-17 Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for Interconnection DevicesWhich Prmit Multi-Directional Mating, for Use withRechargeble Batteries First Edition

IEC 60131-1 Lever Switches Part 1: General Requirements andRules for the Preparation of Detail SpecificationsSecond Edition

IEC 60131-2 Lever Switches Part 2: Requirements for Switches ofType I, Slow-Make Slow-Break First Edition; Erratum-02/1969

IEC 60131-3 Lever Switches Part 3: Requirements for Switches ofType 2, Quick Make, Quick Break (Toggle Switches) First Edition

IEC 60131-4 Lever Switches Part 4: Requirements for MiniatureToggle Switches First Edition

IEC 60132-1 Rotary Wafer Switches (Low Current Rating) Part 1: General Requirements and Measuring Methods FirstEdition; (Supplement A-1973)

IEC 60132-2 Rotary Wafer Switches (Low Current Rating) Part 2: Rotary Wafer Switches with Central Mounting FirstEdition; (Supplement A-1965)

IEC 60132-3 Rotary Wafer Switches (Low Current Rating) Part 3: Rotary Wafer Switches with Two-Hole Mounting FirstEdition; (Supplement A-1965)

IEC 60132-4 Rotary Wafer Switches (Low Current Rating) Part 4: Rotary Wafer Switches with Central Mounting; Maximum 12 Positions; Maximum Diameter 40 mm FirstEdition

IEC 60132-5 Rotary Wafer Switches (Low Current Rating) Part 5: Rotary Wafer Switches with Two-Hole Mounting; Maximum 26 Positions; Maximum Diameter 60 mm FirstEdition

IEC 60132-6 Rotary Wafer Switches (Low Current Rating) Part 6: Rotary Wafer Switches with Printed Wafers; Maximum12 Positions; Maximum Mounting Dimension 45 mmFirst Edition

IEC 60132-7 Rotary Wafer Switches (Low Current Rating) Part 7:


Rotary Wafer Switches with Central Mounting; Maximum 12 Positions and Maximum Diameter 20 mmFirst Edition

IEC 60133 Dimensions of Pot-Cores Made of Magnetic Oxides andAssociated Parts Third Edition

IEC 60134 Rating Systems for Electronic Tubes and Valves andAnalogous Semiconductor Devices First Edition

IEC 60135 Numbering of Electrodes and Designation of Units inElectronic Tubes and Valves First Edition

IEC 60136 Dimensions of Brushes and Brush-Holders forElectrical Machinery Second Edition; (Amendment1-1995)

IEC 60137 Insulated Bushings for Alternating Voltages Above1000 V Fourth Edition; Corrigendum-03/1996

IEC 60139 Preparation of Outline Drawings of Oscilloscope andPicture Tubes First Edition

IEC 60141-1 Tests on Oil-Filled and Gas-Pressure Cables andTheir Accessories - Part 1: Oil-Filled, Paper-Insulated, Metal-Sheathed Cables and Accessoriesfor Alternating Voltages up to and Including 400 kVThird Edition; Amendment 1-1995

IEC 60141-2 Tests on Oil-Filled and Gas-Pressure Cables andTheir Accessories Part 2: Internal Gas- PressureCables and Accessories for Alternating Voltages upto 275 kV First Edition; (Amendment 1-1967)

IEC 60141-3 Tests on Oil-Filled and Gas-Pressure Cables andTheir Accessories Part 3: External Gas- Pressure (Gas Compression) Cables and Accessories forAlternating Voltages up to 275 kV First Edition; (Amendment 1-1967)

IEC 60141-4 Tests on Oil-Filled and Gas-Pressure Cables andTheir Accessories Part 4: Oil-Impregnated Paper-Insulated High Pressure Oil-Filled Pipe-Type Cablesand Accessories for Alternating Voltages up to andIncluding 400 kV First Edition; (Amendment 1-1990)

IEC 60143 Series Capacitors for Power Systems Third Edition; Corrigendum-01/1994

IEC 60143-2 Series Capacitors for Power Systems - Part 2: Protective Equipment for Series Capacitor BanksFirst Edition

IEC 60143-3 Series Capacitors for Power Systems - Part 3: Internal Fuses First Edition

IEC 60145 Var-Hour (Reactive Energy) Meters First Edition IEC 60146-1-1 Semiconductor Convertors - General Requirements and

Line Commutated Convertors Part 1-1: Specificationsof Basic Requirements Third Edition; Corrigendum-08/1993; Amendment 1-1996

IEC 60146-1-2 Semiconductor Convertors General Requirements andLine Commutated Convertors Part 1-2: ApplicationGuide Third Edition

IEC 60146-1-3 Semiconductor Convertors General Requirements andLine Commutated Convertors Part 1-3: Transformersand Reactors Third Edition

IEC 60146-2 Semiconductor Convertors Part 2: SemiconductorSelf-Commutated Convertors First Edition

IEC 60146-3 Semiconductor Convertors Part 3: SemiconductorDirect D.C. Convertors (D.C. Chopper Convertors) First Edition

IEC 60146-4 Semiconductor Convertors Part 4: Method ofSpecifying the Performance and Test Requirements ofUninterruptible Power Systems First Edition

IEC 60146-5 Semiconductor Convertors Part 5: Switches forUninterruptible Power Systems (UPS Switches) FirstEdition


IEC 60146-6 Semiconductor Convertors Part 6: Application Guidefor the Protection of Semiconductor ConvertorsAgainst Overcurrent by Fuses First Edition

IEC 60149-1 Sockets and Accessories for Electronic Plug-InDevices Part 1: General Requirements and Methods ofTest First Edition; Amendment 1-1970; Amendment2-1972

IEC 60149-2 Sockets and Accessories for Electronic Plug-InDevices Part 2: Specification Sheets for Socketsand Dimensions of Wiring Jigs and Pin StraightenersFirst Edition; Supplement A-1968; SupplementB-1969; Supplement C-1971; Supplement D-1971; Supplement E-1971; Supplement F-1972; SupplementG-1972; Supplement H-1972; Supplement J-1972; Supplement K-1976; Supplement L -1976

IEC 60149-3 Sockets and Accessories for Electronic Plug-InDevices Part 3: Sockets for Crystal Holders FirstEdition; Supplement A-1976

IEC 60150 Testing and Calibration of Ultrasonic TherapeuticEquipment First Edition

IEC 60151-0 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 0: PrecautionsRelating to Methods of Measurement of ElectronicTubes and Valves First Edition

IEC 60151-1 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 1: Measurement ofElectrode Current First Edition

IEC 60151-2 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 2: Measurement ofHeater or Filament Current First Edition

IEC 60151-3 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 3: Measurement ofEquivalent Input and Output Admittances FirstEdition

IEC 60151-4 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 4: Methods ofMeasuring Noise Factor First Edition

IEC 60151-5 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 5: Methods ofMeasuring Hiss and Hum First Edition

IEC 60151-6 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 6: Methods ofApplication of Mechanical Shock (Impulse) Excitation to Electronic Tubes and Valves FirstEdition

IEC 60151-7 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 7: Measurement ofEquivalent Noise Resistance First Edition

IEC 60151-8 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 8: Measurement ofCathode Heating Time and Heater Warm-Up Time FirstEdition; Corrigendum-07/1967

IEC 60151-9 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 9: Methods ofMeasuring the Cathode-Interface Impedance FirstEdition

IEC 60151-10 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 10: Methods ofMeasurement of Audio-Frequency Output Power andDistortion First Edition

IEC 60151-11 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 11: Methods ofMeasurement of Radio-Frequency Output Power FirstEdition


IEC 60151-12 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 12: Methods ofMeasuring Electrode Resistance, Transconductance, Amplification Factor, Conversion Resistance andConversion Transconductance First Edition

IEC 60151-13 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 13: Methods ofMeasurement of Emission Current from Hot Cathodesfor High-Vacuum Electronic Tubes and Valves FirstEdition First Edition

IEC 60151-14 Measurements of the Electrical Properties ofElectronic Tubes Part 14: Methods of Measurement ofRadar and Oscilloscope Cathode-Ray Tubes SecondEdition

IEC 60151-15 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 15: Methods ofMeasurement of Spurious and Unwanted ElectrodeCurrents First Edition

IEC 60151-16 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 16: Methods ofMeasurement for Television Picture Tubes FirstEdition

IEC 60151-17 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 17: Methods ofMeasurement of Gasfilled Tubes and Valves SecondEdition

IEC 60151-18 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 18: Methods ofMeasurement of Noises Due to Mechanical or AcousticExcitations First Edition

IEC 60151-19 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 19: Methods ofMeasurement on Corona Stabilizers First Edition

IEC 60151-20 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 20: Methods ofMeasurement of Thyratron Pulse Modulators FirstEdition

IEC 60151-21 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 21: Methods ofMeasurement of Cross-Modulation in Electronic Tubesand Valves First Edition

IEC 60151-22 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 22: Methods ofMeasurement for Cold Cathode Counting and IndicatorTubes First Edition

IEC 60151-23 Measurements of the Electrical Properties ofElectronic Tubes and Valves Part 23: Methods ofMeasurement of Vacuum Pulse Modulator Tubes andValves First Edition

IEC 60151-24 Measurements of the Electrical Properties ofElectronic Tubes Part 24: Methods of Measurement ofCathode-Ray Charge-Storage Tubes First Edition

IEC 60151-25 Measurements of the Electrical Properties ofElectronic Tubes Part 25: Methods of Measurement ofGeiger-Muller Counter Tubes First Edition

IEC 60151-26 Measurements of the Electrical Properties ofElectronic Tubes Part 26: Methods of Measurementfor Camera Tubes First Edition

IEC 60151-27 Measurements of the Electrical Properties ofElectronic Tubes Part 27: Methods of Measurementfor Intermodulation Products in Transmitting TubesFirst Edition

IEC 60151-28 Measurements of the Electrical Properties ofElectronic Tubes Part 28: Methods of Measurement of


Colour Television Picture Tubes First Edition IEC 60152 Identification by Hour Numbers of the Phase

Conductors of 3-Phase Electric Systems FirstEdition

IEC 60153-1 Hollow Metallic Waveguides Part 1: GeneralRequirements and Measuring Methods First Edition

IEC 60153-2 Hollow Metallic Waveguides Part 2: RelevantSpecifications for Ordinary Rectangular WaveguidesSecond Edition

IEC 60153-3 Hollow Metallic Waveguides Part 3: RelevantSpecifications for Flat Rectangular WaveguidesFirst Edition

IEC 60153-4 Hollow Metallic Waveguides Part 4: RelevantSpecifications for Circular Waveguides SecondEdition

IEC 60153-6 Hollow Metallic Waveguides Part 6: RelevantSpecifications for Medium Flat RectangularWaveguides First Edition; (Amendment 1-1977)

IEC 60153-7 Hollow Metallic Waveguides Part 7: RelevantSpecifications for Square Waveguides First Edition

IEC 60154-1 Flanges for Waveguides Part 1: General RequirementsSecond Edition; Amendment 1-1993

IEC 60154-2 Flanges for Waveguides; Part 2: RelevantSpecifications for Flanges for Ordinary RectangularWaveguides Second Edition; Amendment 1-1997

IEC 60154-3 Flanges for Waveguides Part 3: RelevantSpecifications for Flanges for Flat RectangularWaveguides Second Edition

IEC 60154-4 Flanges for Waveguides Part 4: RelevantSpecifications for Flanges for Circular WaveguidesFirst Edition

IEC 60154-6 Flanges for Waveguides Part 6: RelevantSpecifications for Flanges for Medium FlatRectangular Waveguides First Edition

IEC 60154-7 Flanges for Waveguides Part 7: RelevantSpecifications for Flanges for Square WaveguidesFirst Edition

IEC 60155 Glow-Starters for Fluorescent Lamps FourthEdition; Amendment 1-1995

IEC 60156 Insulating Liquids - Determination of the BreakdownVoltage at Power Frequency - Test Method SecondEdition

IEC 60158-2 Low-Voltage Controlgear Part 2: SemiconductorContactors (Solid State Contactors) First Edition

IEC 60158-3 Low-Voltage Controlgear Part 3: AdditionalRequirements for Contactors Subject toCertification First Edition

IEC 60163-1 Sensitive Switches Part 1: General Requirements andRules for the Preparation of Detail SpecificationsThird Edition

IEC 60164 Recommendations in the Field of Quantities andUnits Used in Electricity First Edition

IEC 60166 Fixed Metallized Paper Dielectric Capacitors forDirect Current First Edition

IEC 60167 Methods of Test for the Determination of theInsulation Resistance of Solid Insulating MaterialsFirst Edition

IEC 60168 Tests on Indoor and Outdoor Post Insulators ofCeramic Material or Glass for Systems with NominalVoltages Greater Than 1 000 V Fourth Edition; Amendment 1-1997

IEC 60169-1 Radio-Frequency Connectors Part 1: GeneralRequirements and Measuring Methods Second Edition; Amendment 1-1996


IEC 60169-1-1 Radio-Frequency Connectors Part 1: GeneralRequirements and Measuring Methods Section One - Electrical Tests and Measuring Procedures: Reflection Factor First Edition

IEC 60169-1-3 Radio-Frequency Connectors Part 1: GeneralRequirements and Measuring Methods Section Three - Electrical Tests and Measuring Procedures: Screening Effectiveness First Edition; Amendment1-1996

IEC 60169-2 Radio-Frequency Connectors Part 2: CoaxialUnmatched Connector First Edition; Corrigendum-10/1975; Amendment 1-1982

IEC 60169-3 Radio-Frequency Connectors Part 3: Two PinConnector for Twin Balanced Aerial Feeders FirstEdition

IEC 60169-4 Radio-Frequency Connectors Part 4: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor16 mm (0.63 in) with Screw Lock CharacteristicImpedance 50 Ohms (Type 7-16) Second Edition

IEC 60169-5 Radio-Frequency Connectors Part 5: R.F. CoaxialConnectors for Cables 96 IEC 50-17 and Larger FirstEdition

IEC 60169-6 Radio-Frequency Connectors Part 6: R.F. CoaxialConnectors for Cables 96 IEC 75-17 and Larger FirstEdition

IEC 60169-7 Radio-Frequency Connectors Part 7: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor9,5 mm (0.374 in) with Bayonet Lock - Characteristic Impedance 50 Ohms (Type C) FirstEdition; Amendment 1-1993

IEC 60169-8 Radio-Frequency Connectors Part 8: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor6.5 mm (0.256 in) with Bayonet Lock - Characteristic Impedance 50 Ohms (Type BNC) FirstEdition: Amendment 1-1996; Amendment 2-1997

IEC 60169-9 Radio-Frequency Connectors Part 9: RF CoaxialConnectors with Inner Diameter of Outer Conductor 3mm (0.12 in) with Screw Coupling - CharacteristicImpedance 50 Ohms (Type SMC) First Edition; (IECQQC 221400) (Amendment 1-1996)

IEC 60169-10 Radio-Frequency Connectors Part 10: RF CoaxialConnectors with Inner Diameter of Outer Conductor 3mm (0.12 in) with Snap-On Coupling - CharacteristicImpedance 50 Ohms (Type SMB) First Edition; (Amendment 1-1986) (Amendment 2-1996) (IECQ QC221300)

IEC 60169-11 Radio-Frequency Connectors Part 11: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor9.5 mm (0.374 in) with Screw Coupling-Characteristic Impedance 50 Ohms (Type 4.1/9.5) First Edition

IEC 60169-12 Radio-Frequency Connectors Part 12: R.F. CoaxialConnectors with Screw Coupling, Unmatched (TypeUHF) First Edition

IEC 60169-13 Radio Frequency Connectors Part 13: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor5.6 mm (0.22 in) - Characteristic Impedance 75Ohms (Type 1.6/5.6) - Characteristic Impedance 50Ohms (Type 1.8/5.6) with Similar Mating DimensionsFirst Edition; Amendment 1-1996; IECQ 222400

IEC 60169-14 Radio-Frequency Connectors Part 14: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor12 mm (0.472 in) with Screw Coupling - Characteristic Impedance 75 Ohms (Type 3.5/12) First Edition


IEC 60169-15 Radio-Frequency Connectors Part 15: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor4.13 mm (0.163 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SMA) FirstEdition; Amendment 1-1996; IECQ 221100

IEC 60169-16 Radio-Frequency Connectors Part 16: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor 7mm (0.276 in) with Screw Coupling - CharacteristicImpedance 50 Ohms (75 Ohms (Type N) First Edition; Amendment 1-1996; IECQ 222100

IEC 60169-17 Radio-Frequency Connectors Part 17: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor6,5 mm (0,256 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type TNC) FirstEdition; (Amendment 1-1993) (IECQ QC 222000)

IEC 60169-18 Radio-Frequency Connectors Part 18: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor2.79 mm (0.110 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SSMA) First Edition

IEC 60169-19 Radio-Frequency Connectors Part 19: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor2,08 mm (0,082 in) with Snap Coupling - Characteristics Impedance 50 Ohms (Type SSMB) First Edition; Corrigendum-07/1995

IEC 60169-20 Radio-Frequency Connectors Part 20: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor2.08 mm (0.082 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SSMC) First Edition

IEC 60169-21 Radio-Frequency Connectors Part 21: Two Types ofRadio-Frequency Connectors with Inner Diameter ofOuter Conductor 9.5 mm (0.374 in) with DifferentVersions of Screw Coupling - CharacteristicImpedance 50 Ohms (Types SC-A and SC-B) FirstEdition; Amendment 1-1996

IEC 60169-22 Radio-Frequency Connectors Part 22: R.F. Two-PoleBayonet Coupled Connectors for Use with ShieldedBalanced Cables Having Twin Inner Conductors (TypeBNO) First Edition

IEC 60169-23 Radio-Frequency Connectors Part 23: Pin and SocketConnector for Use with 3,5 mm Rigid PrecisionCoaxial Lines with Inner Diameter of OuterConductor 3,5 mm (0,1378 in) First Edition

IEC 60169-24 Radio-Frequency Connectors Part 24: Radio-FrequencyCoaxial Connectors with Screw Coupling, Typicallyfor Use in 75 Ohm Cable Distribution Systems (TypeF) First Edition; Corrigendum-1995

IEC 60169-25 Radio-Frequency Connectors Part 25: Two-Pole Screw (3/4-20 UNEF) Coupled Connectors for Use withShielded Balanced Cables Having Twin InnerConductors with Inner Diameter of Outer Conductor13,56 mm (0,534 in) (Type TWHN) First Edition

IEC 60169-26 Radio-Frequency Connectors - Part 26: R.F. CoaxialConnectors with Screw Coupling - CharacteristicImpedance 50 Ohms - Frequency Range 0 to 18 GHz (Type TNC 18 GHz) First Edition

IEC 60169-27 Radio-Frequency Connectors - Part 27: Radio-Frequency Coaxial Connectors with Screw Coupling, Typically for Use in 75 Ohms Cable DistributionSystems (Type E) First Edition

IEC 60169-28 Radio-Frequency Connectors - Part 28: Radio-Frequency Coaxial Connectors with Inner Diameter ofOuter Conductor of 5,60 mm (0,220 in) with Snap-OnCoupling - Characteristic Impedance 75 Ohms First


Edition IEC 60169-29 Radio-Frequency Connectors - Part 29: Miniature

R.F. Coaxial Connectors with Screw-, Push-Pull, andSnap-On Coupling or Slide-In Rack and PanelApplications - Characteristic Impedance 50 Ohms (Type 1,0/2,3) First Edition; Amendment 1-1995

IEC 60172 Test Procedure for the Determination of theTemperature Index of Enamelled Winding Wires ThirdEdition; Amendment 1- 1997

IEC 60173 Colours of the Cores of Flexible Cables and CordsFirst Edition

IEC 60181 Index of Electrical Measuring Apparatus Used inConnection with Ionizing Radiation First Edition; Supplement A-1965; Supplement B-1965; Amendment1-1967

IEC 60183 Guide to the Selection of High-Voltage CablesSecond Edition; Amendment 1-1990

IEC 60184 Methods for Specifying the Characteristics ofElectro-Mechanical Transducers for Shock andVibration Measurements First Edition; Erratum-04/1966

IEC 60185 Current Transformers Second Edition; Amendment1-1990; Amendment 2-1995; Replaced by IEC 44-1: 1996

IEC 60186 Voltage Transformers Second Edition; (Amendment1-1988) (Amendment 2-1995)

IEC 60188 High-Pressure Mercury Vapour Lamps Second Edition; Amendment 1-1976; Amendment 3-1984, IncorporatingAmendment 2; Erratum-07/1985; Amendment 4-1988; Amendment 5-1991

IEC 60189-1 Low-Frequency Cables and Wires with PVC Insulationand PVC Sheath Part 1: General Test and MeasuringMethods Second Edition; Amendment 3-1992, Incorporating Amendments 1 and 2

IEC 60189-2 Low-Frequency Cables and Wires with P.V.CInsulation and P.V.C Sheath Part 2: Cables inPairs, Triples, Quads and Quintuples for InsideInstallations Third Edition; Amendment 1-1989; Amendment 2-1996

IEC 60189-3 Low-Frequency Cables and Wires with PVC Insulationand PVC Sheath Part 3: Equipment Wires with Solidor Stranded Conductor, PVC Insulated, in Singles, Pairs and Triples Third Edition; Amendment 1-1989

IEC 60189-4 Low-Frequency Cables and Wires with P.V.C. Insulation and P.V.C. Sheath Part 4: DistributionWires with Solid Conductors, P.V.C. Insulated, inPairs, Triples, Quads and Quintuples SecondEdition; Amendment 1-1989

IEC 60189-5 Low-Frequency Cables and Wires with PVC Insulationand PVC Sheath Part 5: Equipment Wires and Cableswith Solid or Stranded Conductors, PVC Insulated, Screened, Single or One Pair Second Edition; Amendment 2-1992, Incorporating Amendment 1

IEC 60189-6 Low-Frequency Cables and Wires with PVC Insulationand PVC Sheath Part 6: Signalling Cables in Singlesfor Telecommunication Equipment and InstallationSecond Edition; (Amendment 1-1989)

IEC 60189-7 Low-Frequency Cables and Wires with P.V.C. Insulation and P.V.C. Sheath Part 7: DistributionWires with Solid Conductors, P.V.C. Insulated, Polyamide Coated, in Singles, Pairs, Triples, Quadsand Quintuples Second Edition; (Amendment 1-1989)

IEC 60190 Non-Wirewound Potentiometers Type 2 First Edition IEC 60191-1 Mechanical Standardization of Semiconductor Devices


Part 1: Preparation of Drawings of SemiconductorDevices First Edition; (Supplement A-1969) (Supplement B-1970) (Supplement C-1974)

IEC 60191-2 Mechanical Standardization of SemiconductorDevices - Part 2: Dimensions First Edition; Supplement A-1967; Supplement B-1969; SupplementC-1970; Supplement D-1971; Supplement E-1974; Supplement F-1976; Supplement G-1978; SupplementH-1978; Supplement J-1980; Supplement K-1981; Supplement L-1982; Supplement M-1983; SupplementN-1987; Supplement P-1988; Supplement Q-1990; Supplement R-1995; Supplement S-1995; SupplementT-1996 et/and Supplement U-1997

IEC 60191-3 Mechanical Standardization of SemiconductorDevices - Part 3: General Rules for the Preparationof Outline Drawings of Integrated Circuits FirstEdition; Supplement A-1976; Supplement B-1978; Amendment 1-1983; Supplement C-1987; SupplementD-1988; Supplement E-1990; Supplement F-1994; Amendment 2-1995; Corrigendum-1996

IEC 60191-4 Mechanical Standardization of Semiconductor DevicesPart 4: Coding System and Classification into Formsof Package Outlines for Semiconductor Devices FirstEdition

IEC 60191-5 Mechanical Standardization of SemiconductorDevices - Part 5: Recommendations Applying toIntegrated Circuit Packages Using Tape AutomatedBonding (TAB) Second Edition

IEC 60191-6 Mechanical Standardization of Semiconductor DevicesPart 6: General Rules for the Preparation ofOutline Drawings of Surface Mounted SemiconductorDevice Packages First Edition

IEC 60192 Low Pressure Sodium Vapour Lamps Second Edition; Amendment 2-1988, Includes Amendment 1; Amendment3-1992; Amendment 4-1993; Amendment 5-1994

IEC 60193 International Code for Model Acceptance Tests ofHydraulic Turbines First Edition; (SupplementA-1972) (Amendment 1-1977)

IEC 60194 Terms and Definitions for Printed Circuits ThirdEdition; Corrigendum-01/1990

IEC 60195 Method of Measurement of Current Noise Generated inFixed Resistors First Edition

IEC 60196 IEC Standard Frequencies First Edition IEC 60197 High-Voltage Connecting Wire with Flame Retarding

Insulation for Use in Television Receivers FirstEdition

IEC 60203 Dimensions of the Crimp Area of Machined Crimp TypeContacts First Edition

IEC 60204-1 Safety of Machinery - Electrical Equipment ofMachines - Part 1: General Requirements FourthEdition; Corrigendum-1998

IEC 60204-2 Electrical Equipment of Industrial Machines Part2: Item Designation and Examples of Drawings, Diagrams, Tables and Instructions (Appendices D andE of Publication 204-1) Second Edition

IEC 60204-31 Electrical Equipment of Industrial Machines - Part31: Particular Requirements for Sewing Machines, Units and Systems Second Edition; Replaces IEC204-3-1: 1988

IEC 60205 Calculation of the Effective Parameters of MagneticPiece Parts First Edition; Supplement A-1968; Supplement B-1974; Amendment 1-1976; Amendment2-1981

IEC 60206 Designation of the Quantities Characterizing the


Magnetic and Electric Properties of Vacuum and aSubstance First Edition

IEC 60211 Maximum Demand Indicators, Class 1.0 First Edition IEC 60212 Standard Conditions for Use Prior to and During the

Testing of Solid Electrical Insulating MaterialsSecond Edition

IEC 60214 On-Load Tap-Changers Third Edition IEC 60215 Safety Requirements for Radio Transmitting

Equipment Third Edition; Amendment 2-1993, Incorporating Amendment 1

IEC 60216-1 Guide for the Determination of Thermal EnduranceProperties of Electrical Insulating Materials Part1: General Guidelines for Ageing Procedures andEvaluation of Test Results Fourth Edition

IEC 60216-2 Guide for the Determination of Thermal EnduranceProperties of Electrical Insulating Materials Part2: Choice of Test Criteria Third Edition

IEC 60216-3-1 Guide for the Determination of Thermal EnduranceProperties of Electrical Insulating Materials Part3: Instructions for Calculating Thermal EnduranceCharacteristics Section 1 - Calculations Using MeanValues of Normally Distributed Complete Data FirstEdition

IEC 60216-3-2 Guide for the Determination of Thermal EnduranceProperties of Electrical Insulating Materials Part3: Instructions for Calculating Thermal EnduranceCharacteristics Section 2 - Calculations forIncomplete Data: Proof Test Results up to andIncluding the Median Time to End-Point (Equal TestGroups) First Edition

IEC 60216-4-1 Guide for the Determination of Thermal EnduranceProperties of Electrical Insulating Materials Part4: Ageing Ovens Section One: Single-Chamber OvensThird Edition

IEC 60216-5 Guide for the Determination of Thermal EnduranceProperties of Electrical Insulating Materials Part5: Guidelines for the Application of ThermalEndurance Characteristics First Edition

IEC 60220 Dimensions of Tubes, Pins and Rods of FerromagneticOxides First Edition

IEC 60221 Dimensions of Screw Cores Made of FerromagneticOxides First Edition; Supplement A-1972; Amendment2-1976

IEC 60222 Methods for Specifying the Characteristics ofAuxiliary Equipment for Shock and VibrationMeasurement First Edition

IEC 60223 Dimensions of Aerial Rods and Slabs ofFerromagnetic Oxides First Edition; SupplementA-1972; Supplement B-1977

IEC 60225 Octave, Half-Octave and Third-Octave Band FiltersIntended for the Analysis of Sounds and VibrationsFirst Edition; Withdrawn; Replaced by IEC 1265: 1995

IEC 60226 Dimensions of Cross Cores (X-Cores) Made ofFerromagnetic Oxides and Associated Parts FirstEdition; Supplement A-1970; Amendment 1-1982

IEC 60227-1 Polyvinyl Chloride Insulated Cables of RatedVoltages up to and Including 450/750 V Part 1: General Requirements Second Edition; Amendment1-1995; Corrigendum-1995; Amendment 2-1998

IEC 60227-2 Polyvinyl Chloride Insulated Cables of RatedVoltages up to and Including 450/750 V - Part 2: Test Methods Second Edition; Corrigendum 1998

IEC 60227-3 Polyvinyl Chloride Insulated Cables of Rated


Voltages up to and Including 450/750 V - Part 3: Non-Sheathed Cables for Fixed Wiring Edition 2.1

IEC 60227-4 Polyvinyl Chloride Insulated Cables of RatedVoltages up to and Including 450/750 V; Part 4: Sheathed Cables for Fixed Wiring Second Edition; Amendment 1-1997

IEC 60227-5 Polyvinyl Chloride Insulated Cables of RatedVoltages up to and Including 450/750 V - Part 5: Flexible Cables (Cords) Second Edition; Amendment1-1997

IEC 60227-6 Polyvinyl Chloride Insulated Cables of RatedVoltages up to and Including 450/750 V Part 6: LiftCables and Cables for Flexible Connections SecondEdition; Amendment 1-1997

IEC 60227-7 Polyvinyl Chloride Insulated Cables of RatedVoltages up to and Including 450/750 V Part 7: Flexible Cables Screened and Unscreened with Two orMore Conductors First Edition

IEC 60228 Conductors of Insulated Cables Second Edition; Errata-09/1979; Supplement A-1982; Amendment 1-1993

IEC 60229 Tests on Cable Oversheaths Which Have a SpecialProtective Function and Are Applied by ExtrusionSecond Edition

IEC 60230 Impulse Tests on Cables and Their Accessories FirstEdition

IEC 60231 General Principles of Nuclear ReactorInstrumentation First Edition; Supplement A-1969; Supplement B-1972; Supplement C-1974; SupplementD-1975; Supplement E-1977; Supplement F-1977; Supplement G-1977

IEC 60232 General Characteristics of Nuclear ReactorInstrumentation First Edition

IEC 60233 Tests on Hollow Insulators for Use in ElectricalEquipment Second Edition; Amendment 1-1988

IEC 60234 Dimensions of Ceramic Dielectric Capacitors of thePlate Type First Edition; Supplement A-1970

IEC 60235-1 Measurement of the Electrical Properties ofMicrowave Tubes Part 1: Terminology SecondEdition; Supplement A-1975

IEC 60235-2 Measurement of the Electrical Properties ofMicrowave Tubes Part 2: General Measurements, Chapter VI: Methods of Measuring the Effects ofNon-Linearity First Edition; Supplement A-1974; Supplement B-1975; Supplement C-E:1976

IEC 60235-3 Measurement of the Electrical Properties ofMicrowave Tubes Part 3: Disk Seal Tubes FirstEdition

IEC 60235-4 Measurement of the Electrical Properties ofMicrowave Tubes Part 4: Magnetrons Clause 4: Voltage Tunable Magnetron First Edition; SupplementA-1975

IEC 60235-5 Measurement of the Electrical Properties ofMicrowave Tubes Part 5: Low-Power OscillatorKlystrons First Edition

IEC 60235-6 Measurement of the Electrical Properties ofMicrowave Tubes Part 6: High-Power Klystrons FirstEdition

IEC 60235-7 Measurement of the Electrical Properties ofMicrowave Tubes Part 7: Gas-Filled MicrowaveSwitching Devices First Edition

IEC 60235-8 Measurement of the Electrical Properties ofMicrowave Tubes Part 8: Backward-Wave OscillatorTubes - "O" Type First Edition; Supplement A-1974

IEC 60235-9 Measurement of the Electrical Properties of


Microwave Tubes Part 9: Crossed-Field AmplifierTubes First Edition

IEC 60236 Methods for the Designation of ElectrostaticDeflecting Electrodes of Cathode-Ray Tubes SecondEdition

IEC 60237 Ignitrons to Be Used in Welding Machine ControlFirst Edition

IEC 60238 Edison Screw Lampholders Sixth Edition; Amendment1-1997; Amendment 2-1997

IEC 60239 Nominal Dimensions of Cylindrical Machined GraphiteElectrodes with Threaded Sockets and Nipples forUse in Electric Arc Furnaces Third Edition

IEC 60240-1 Characteristics of Electric Infra-Red Emitters forIndustrial Heating Part 1: Short Wave Infra-RedEmitters Second Edition

IEC 60241 Fuses for Domestic and Similar Purposes FirstEdition

IEC 60242 Standard Frequencies for Centralized NetworkControl Installations First Edition

IEC 60243-1 Electrical Strength of Insulating Materials - TestMethods - Part 1: Tests at Power Frequencies SecondEdition

IEC 60243-2 Methods of Test for Electric Strength of SolidInsulating Materials Part 2: AdditionalRequirements for Tests Using Direct Voltage FirstEdition

IEC 60243-3 Methods of Test for Electric Strength of SolidInsulating Materials Part 3: AdditionalRequirements for Impulse Tests First Edition

IEC 60244-1 Methods of Measurement for Radio Transmitters Part1: General Conditions of Measurement, Frequency, Output Power and Power Consumption First Edition; Supplement A-1968; Amendment 2-1989, IncorporatingAmendment 1

IEC 60244-2 Methods of Measurement for Radio Transmitters Part2: Bandwidth, Out-of-Band Power and Power of Non-Essential Oscillations First Edition; SupplementA-1969; Amendment 1-1973 to Supplement A; Amendment1-1974; Supplement B-1969

IEC 60244-3 Methods of Measurement for Radio Transmitters Part3: Wanted and Unwanted Modulation UnwantedModulation, Including Hum and Noise ModulationFirst Edition; Supplement A-1971; Supplement B-1972

IEC 60244-4 Methods of Measurement for Radio Transmitters Part4: Amplitude/Frequency Characteristics and Non-Linearity Distortion in Transmitters forRadiotelephony and Sound Broadcasting FirstEdition; Supplement A-1976

IEC 60244-5 Methods of Measurement for Radio Transmitters Part5: Performance Characteristics of TelevisionTransmitters Second Edition

IEC 60244-6 Methods of Measurement for Radio Transmitters Part6: Cabinet Radiation at Frequencies Between 130 kHzand 1 GHz First Edition

IEC 60244-7 Methods of Measurement for Radio Transmitters Part7: Cabinet Radiation at Frequencies Above 1 GHzSection Four - Medium-Sized Transmitters SectionFive - Large Transmitters First Edition; SupplementA-1980

IEC 60244-8 Methods of Measurement for Radio Transmitters Part8: Performance Characteristics of Vestigial-Sideband Demodulators Used for Testing TelevisionTransmitters and Transposers Second Edition

IEC 60244-9 Methods of Measurement of Radio Transmitters Part


9: Performance Characteristics for TelevisionTransposers Second Edition

IEC 60244-10 Methods of Measurement for Radio Transmitters Part10: Methods of Measurement for TelevisionTransmitters and Transposers Employing InsertionTest Signals First Edition

IEC 60244-11 Methods of Measurement for Radio Transmitters Part11: Transposers for FM Sound Broadcasting FirstEdition

IEC 60244-12-1 Methods of Measurement for Radio Transmitters Part12: Guideline for Drawing up Descriptive Leafletsfor Transmitters and Transposers for Sound andTelevision Broadcasting - Characteristics to BeSpecified First Edition

IEC 60244-12-2 Methods of Measurement for Radio Transmitters Part12: Guideline for Drawing up Descriptive Leafletsfor Transmitters and Transposers for Sound andTelevision Broadcasting - Specification SheetsFirst Edition

IEC 60244-13 Methods of Measurement for Radio Transmitters Part13: Performance Characteristics for FM SoundBroadcasting First Edition

IEC 60244-14 Methods of Measurement for Radio Transmitters - Part 14: External Intermodulation Products Causedby Two or More Transmitters Using the Same orAdjacent Antennas First Edition

IEC 60245-1 Rubber Insulated Cables - Rated Voltages up to andIncluding 450/750 V - Part 1: General RequirementsThird Edition; Amendment 1- 1997; Amendment 2- 1997

IEC 60245-2 Rubber Insulated Cables - Rated Voltages up to andIncluding 450/750 V - Part 2: Test Methods SecondEdition; Amendment 1- 1997; Amendment 2- 1997

IEC 60245-3 Rubber Insulated Cables - Rated Voltages up to andIncluding 450/750 V - Part 3: Heat ResistantSilicone Insulated Cables Second Edition; Amendment1-1997

IEC 60245-4 Rubber Insulated Cables - Rated Voltage up to andIncluding 450/750 V - Part 4: Cords and FlexibleCables Second Edition; Amendment 1-1997

IEC 60245-5 Rubber Insulated Cables - Rated Voltages up to andIncluding 450/750 V - Part 5: Lift Cables SecondEdition

IEC 60245-6 Rubber Insulated Cables - Rated Voltages up to andIncluding 450/750 V - Part 6: Arc Welding ElectrodeCables Second Edition; Amendment 1-1997

IEC 60245-7 Rubber Insulated Cables - Rated Voltages up to andIncluding 450/750 V - Part 7: Heat ResistantEthylene-Vinyl Acetate Rubber Insulated CablesFirst Edition; Amendment 1 05-1997

IEC 60245-8 Rubber Insulated Cables - Rated Voltages up to andIncluding 450/750 V - Part 8: Cords forApplications Requiring High Flexibility FirstEdition

IEC 60246 Connecting Wires Having a Rated Voltage of 20 kVand 25 kV D.C. and a Maximum Working Temperature of105 Degrees C for Use in Television Receivers FirstEdition

IEC 60247 Measurement of Relative Permittivity, DielectricDissipation Factor and D.C. Resistivity ofInsulating Liquids Second Edition

IEC 60248 Dimensions of Planchets Used in Nuclear ElectronicInstruments Second Edition

IEC 60249-1 Base Materials for Printed Circuits Part 1: TestMethods Second Edition; Amendment 4-1993,


Incorporating Amendments 1 Thru 3 IEC 60249-2-1 Base Materials for Printed Circuits Part 2:

Specifications Specification No.1: PhenolicCellulose Paper Copper-Clad Laminated Sheet, HighElectrical Quality Second Edition; Amendment2-1993, Incorporating Amendment 1; Amendment3-1994; BS EN 60249-2-1: 1994

IEC 60249-2-2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 2: PhenolicCellulose Paper Copper-Clad Laminated Sheet, Economic Quality Second Edition; Amendment 3-1993, Incorporating Amendments 1 and 2; Amendment 4-1994

IEC 60249-2-3 Base Materials for Printed Circuits Part 2: Specifications Specification No. 3: EpoxideCellulose Paper Copper-Clad Laminated Sheet ofDefined Flammability (Vertical Burning Test) SecondEdition; Amendment 2-1993, Incorporating Amendment1; Amendment 3-1994

IEC 60249-2-4 Base Materials for Printed Circuits Part 2: Specifications Specification No. 4: Epoxide WovenGlass Fabric Copper-Clad Laminated Sheet, GeneralPurpose Grade Second Edition; Amendment 3-1993, Incorporating Amendments 1 and 2; Amendment 4-1994

IEC 60249-2-5 Base Materials for Printed Circuits Part 2: Specifications Specification No. 5: Epoxide WovenGlass Fabric Copper-Clad Laminated Sheet of DefinedFlammability (Vertical Burning Test) SecondEdition; Amendment 3-1993, Incorporating Amendments1 and 2; Amendment 4-1994

IEC 60249-2-6 Base Materials for Printed Circuits Part 2: Specifications Specification No. 6: PhenolicCellulose Paper Copper-Clad Laminated Sheet ofDefined Flammability (Horizontal Burning Test) Second Edition; Amendment 2-1993, IncorporatingAmendment 1; Amendment 3-1994

IEC 60249-2-7 Base Materials for Printed Circuits Part 2: Specifications Specification No. 7: PhenolicCellulose Paper Copper-Clad Laminated Sheet ofDefined Flammability (Vertical Burning Test) SecondEdition; Amendment 2-1993, Incorporating Amendment1; Amendment 3-1994

IEC 60249-2-8 Base Materials for Printed Circuits Part 2: Specifications Specification No. 8: FlexibleCopper-Clad Polyester (PETP) Film First Edition; Amendment 1-1993

IEC 60249-2-9 Base Materials for Printed Circuits Part 2: Specifications Specification No. 9: EpoxideCellulose Paper Core, Epoxide Glass Cloth SurfacesCopper-Clad Laminated Sheet of DefinedFlammability (Vertical Burning Test) FirstEdition; Amendment 3-1993, Incorporating Amendments1 and 2; Amendment 4-1994

IEC 60249-2-10 Base Materials for Printed Circuits Part 2: Specifications Specification No. 10: Epoxide Non-Woven/Woven Glass Reinforced Copper-Clad LaminatedSheet of Defined Flammability (Vertical BurningTest) First Edition; Amendment 3-1993, Incorporating Amendments 1 and 2; Amendment 4-1994

IEC 60249-2-11 Base Materials for Printed Circuits Part 2: Specifications Specification No. 11: Thin EpoxideWoven Glass Fabric Copper-Clad Laminated Sheet, General Purpose Grade, for Use in the Fabricationof Multilayer Printed Boards First Edition; Amendment 2-1993, Incorporating Amendment 1; Amendment 3-1994


IEC 60249-2-12 Base Materials for Printed Circuits Part 2: Specifications Specification No. 12: Thin EpoxideWoven Glass Fabric Copper-Clad Laminated Sheet ofDefined Flammability, for Use in the Fabrication ofMultilayer Printed Boards Second Edition; Amendment2-1993, Incorporating Amendment 1; Amendment 3-1994

IEC 60249-2-13 Base Materials for Printed Circuits Part 2: Specifications Specification No. 13: FlexibleCopper-Clad Polyimide Film, General Purpose GradeFirst Edition; Amendment 1-1993

IEC 60249-2-14 Base Materials for Printed Circuits Part 2: Specifications Specification No. 14: PhenolicCellulose Paper Copper-Clad Laminated Sheet ofDefined Flammability (Vertical Burning Test), Economic Quality First Edition; Amendment 3-1993, Incorporating Amendments 1 & 2; Amendment 4-1994

IEC 60249-2-15 Base Materials for Printed Circuits Part 2: Specifications Specification No. 15: FlexibleCopper-Clad Polyimide Film, of Defined FlammabilityFirst Edition; Amendment 1-1993

IEC 60249-2-16 Base Materials for Printed Circuits Part 2: Specifications Spec No. 16: Polyimide Woven GlassFabric Copper-Clad Laminated Sheet of DefinedFlammability (Vertical Burning Test) FirstEdition; Amendment 1-1993; Amendment 2-1994

IEC 60249-2-17 Base Materials for Printed Circuits Part 2: Specifications Specification No. 17: Thin PolyimideWoven Glass Fabric Copper-Clad Laminated Sheet ofDefined Flammability for Use in the Fabrication ofMultilayer Printed Board First Edition; Corrigendum-06/1992; Amendment 1-1993; Amendment2-1994

IEC 60249-2-18 Base Materials for Printed Circuits Part 2: Specifications Specification No. 18: Bismaleimide/Triazine Modified Epoxide Woven Glass FabricCopper-Clad Laminated Sheet of DefinedFlammability (Vertical Burning Test) FirstEdition; Amendment 1-1993; Amendment 2-1994

IEC 60249-2-19 Base Materials for Printed Circuits Part 2: Specifications Specification No. 19: ThinBismaleimide/Triazine Modified Epoxide Woven GlassFabric Copper-Clad Laminated Sheet of DefinedFlammability for Use in the Fabrication ofMultilayer Printed Boards First Edition; Amendment1-1993; Amendment 2-1994

IEC 60249-3-1 Base Materials for Printed Circuits Part 3: SpecialMaterials Used in Connection with Printed CircuitsSpecification No. 1: Prepreg for Use as BondingSheet Material in the Fabrication of MultilayerPrinted Boards Second Edition

IEC 60249-3-3 Base Materials for Printed Circuits Part 3: SpecialMaterials Used in Connection with Printed CircuitsSpecification No.3: Permanent Polymer CoatingMaterials (Solder Resist) for Use in theFabrication of Printed Boards First Edition

IEC 60249-3A Metal-Clad Base Materials for Printed Circuits Part3: Special Materials Used in Connection withPrinted Circuits Specification No. 2 Specificationfor Copper Foil for Use in the Manufacture ofCopper-Clad Base Materials This is a Supplement; Replaced by IEC 1249-5-1: 1995

IEC 60250 Recommended Methods for the Determination of thePermittivity and Dielectric Dissipation Factor ofElectrical Insulating Materials at Power, Audio andRadio Frequencies Including Metre Wavelengths First


Edition IEC 60252 A.C. Motor Capacitors Third Edition IEC 60253 Power Supply for Air and Land Vehicle-Mounted

Prospection Equipment for Radioactive MaterialsFirst Edition

IEC 60254-1 Lead-Acid Traction Batteries - Part 1: GeneralRequirements and Methods of Test Third Edition

IEC 60254-2 Lead-Acid Traction Batteries - Part 2: Dimensionsof Cells and Terminals and Marking of Polarity onCells Third Edition

IEC 60255-0-20 Electrical Relays Contact Performance of ElectricalRelays First Edition; Replaced by IEC 255-23: 1994

IEC 60255-1-00 All-or-Nothing Electrical Relays First Edition IEC 60255-3 Electrical Relays Part 3: Single Input Energizing

Quantity Measuring Relays with Dependent orIndependent Time Second Edition

IEC 60255-4 Single Input Energizing Quantity Measuring Relayswith Dependent Specified Time First Edition; Amendment 1-1979

IEC 60255-5 Electrical Relays Part 5: Insulation Tests forElectrical Relays First Edition

IEC 60255-6 Electrical Relays Part 6: Measuring Relays andProtection Equipment Second Edition

IEC 60255-7 Electrical Relays Part 7: Test and MeasurementProcedures for Electromechanical All-or-NothingRelays Second Edition; IECQ QC 160000

IEC 60255-8 Electrical Relays Part 8: Thermal Electrical RelaysSecond Edition

IEC 60255-9 Electrical Relays Part 9: Dry Reed Make ContactUnits First Edition

IEC 60255-10 Electrical Relays Part 10: Application of the IECQuality Assessment System for Electronic Componentsto All-or-Nothing Relays First Edition

IEC 60255-11 Electrical Relays Part 11: Interruptions to andAlternating Component (Ripple) in D.C. AuxiliaryEnergizing Quantity of Measuring Relays FirstEdition

IEC 60255-12 Electrical Relays Part 12: Directional Relays andPower Relays with Two Input Energizing QuantitiesFirst Edition

IEC 60255-13 Electrical Relays Part 13: Biased (Percentage) Differential Relays First Edition

IEC 60255-14 Electrical Relays Part 14: Endurance Test forElectrical Relay Contacts - Preferred Values forContact Loads First Edition

IEC 60255-15 Electrical Relays Part 15: Endurance Tests forElectrical Relay Contacts - Specification for theCharacteristics of Test Equipment First Edition

IEC 60255-16 Electrical Relays Part 16: Impedance MeasuringRelays First Edition

IEC 60255-18 Electrical Relays Part 18: Dimensions for GeneralPurpose All-or-Nothing Relays First Edition

IEC 60255-19 Electrical Relays Part 19: SectionalSpecification: Electromechanical All-or-NothingRelays of Assessed Quality First Edition; IECQ QC160100

IEC 60255-19-1 Electrical Relays Part 19: Blank DetailSpecification: Electromechanical All-or-NothingRelays of Assessed Quality Test Schedules 1, 2 and3 First Edition; IECQ QC 160101

IEC 60255-20 Electrical Relays Part 20: Protection (Protective) Systems First Edition

IEC 60255-21-1 Electrical Relays Part 21: Vibration, Shock, Bumpand Seismic Tests on Measuring Relays and


Protection Equipment Section One - Vibration Tests (Sinusoidal) First Edition

IEC 60255-21-2 Electrical Relays Part 21: Vibration, Shock, Bumpand Seismic Tests on Measuring Relays andProtection Equipment Section Two - Shock and BumpTests First Edition

IEC 60255-21-3 Electrical Relays - Part 21: Vibration, Shock, Bumpand Seismic Tests on Measuring Relays andProtection Equipment - Section 3: Seismic TestsFirst Edition; CENELEC EN 60255-21-3: 1995

IEC 60255-22-1 Electrical Disturbance Tests for Measuring Relaysand Protection Equipment Part 1: 1 MHz BurstDisturbance Tests First Edition

IEC 60255-22-2 Electrical Relays - Part 22: Electrical DisturbanceTests for Measuring Relays and ProtectionEquipment - Section 2: Electrostatic DischargeTests Second Edition

IEC 60255-22-3 Electrical Relays Part 22: Electrical DisturbanceTests for Measuring Relays and Protection EquipmentSection Three - Radiated Electromagnetic FieldDisturbance Tests First Edition

IEC 60255-22-4 Electrical Relays Part 22: Electrical DisturbanceTests for Measuring Relays and Protection EquipmentSection 4: Fast Transient Disturbance Test FirstEdition

IEC 60255-23 Electrical Relays - Part 23: Contact PerformanceFirst Edition; Corrigendum-1996; Cancels andReplaces IEC 255-0-20: 1974

IEC 60256 External Diameters of Cylindrical Radiation ProbesContaining Geiger-Muller or Proportional CounterTubes or Scintillation Detectors First Edition

IEC 60258 Direct Acting Recording Electrical MeasuringInstruments and Their Accessories First Edition; Amendment 1-1976

IEC 60259 Miscellaneous Lamps and Ballasts First Edition; Supplement A-1972

IEC 60260 Test Enclosures of Non-Injection Type for ConstantRelative Humidity First Edition; Errata-12/1969

IEC 60261 Sealing Test for Pressurized Waveguide Tubing andAssemblies Second Edition

IEC 60262 Ballasts for High Pressure Mercury Vapour LampsSecond Edition; Amendment 1-1974; Amendment2-1976; Amendment 3-1978

IEC 60263 Scales and Sizes for Plotting FrequencyCharacteristics and Polar Diagrams Third Edition

IEC 60264-1 Packaging of Winding Wires Part 1: Containers forRound Winding Wires First Edition

IEC 60264-2-1 Packaging of Winding Wires Part 2: CylindricalBarrelled Delivery Spools Section One - BasicDimensions First Edition

IEC 60264-2-2 Packaging of Winding Wires Part 2: CylindricalBarrelled Delivery Spools Section 2 - Specificationfor Returnable Spools Made from ThermoplasticMaterial First Edition

IEC 60264-2-3 Packaging of Winding Wires Part 2: CylindricalBarrelled Delivery Spools Section 3 - Specificationfor Non-Returnable Spools Made from ThermoplasticMaterial First Edition

IEC 60264-3-1 Packaging of Winding Wires Part 3: Taper BarrelledDelivery Spools Section One - Basic DimensionsFirst Edition

IEC 60264-3-2 Packaging of Winding Wires Part 3: Taper BarrelledDelivery Spools Section 2 - Specification forReturnable Spools Made from Thermoplastic Material


First Edition IEC 60264-3-3 Packaging of Winding Wires Part 3: Taper Barrelled

Delivery Spools Section 3 - Specification for Non-Returnable Spools Made from Thermoplastic MaterialFirst Edition

IEC 60264-3-4 Packaging of Winding Wires Part 3: Taper BarrelledDelivery Spools Section 4 - Basic Dimensions ofContainers for Taper Barrelled Delivery SpoolsFirst Edition

IEC 60264-3-5 Packaging of Winding Wires - Part 3: TaperBarrelled Delivery Spools - Section 5: Specification for Spool Containers Made fromThermoplastic Material First Edition; Corrigendum-1996

IEC 60264-4-1 Packaging of Winding Wires - Part 4-1: Methods ofTest - Delivery Spools Made from ThermoplasticMaterials Second Edition

IEC 60264-4-2 Packaging of Winding Wires Part 4: Methods of TestSection 2: Containers Made from ThermoplasticMaterial for Taper Barrelled Delivery Spools FirstEdition

IEC 60264-5-1 Packaging of Winding Wires - Part 5-1: CylindricalBarrelled Delivery Spools with Conical Flanges - Basic Dimensions First Edition

IEC 60265-1 High-Voltage Switches - Part 1: Switches for RatedVoltages Above 1 kV and Less Than 52 kV ThirdEdition

IEC 60265-2 High-Voltage Switches Part 2: High-Voltage Switchesfor Rated Voltages of 52 kV and Above FirstEdition; Corrigendum-02/1990; Amendment 1-1994

IEC 60268-1 Sound System Equipment Part 1: General SecondEdition; Amendment 1: 1988; Amendment 2-1988

IEC 60268-2 Sound System Equipment Part 2: Explanation ofGeneral Terms and Calculation Methods SecondEdition; Amendment 1-1991

IEC 60268-3 Sound System Equipment Part 3: Amplifiers SecondEdition; Amendment 1-1990; Amendment 2-1991

IEC 60268-4 Sound System Equipment - Part 4: Microphones SecondEdition; BS 6840-4: 1997

IEC 60268-5 Sound-System Equipment Part 5: Loudspeakers SecondEdition; Amendment 1-04/1993; Amendment 2-07/1996

IEC 60268-6 Sound System Equipment Part 6: Auxiliary PassiveElements First Edition

IEC 60268-7 Sound System Equipment - Part 7: Headphones andEarphones Second Edition

IEC 60268-8 Sound System Equipment Part 8: Automatic GainControl Devices First Edition

IEC 60268-9 Sound System Equipment Part 9: ArtificialReverberation, Time Delay and Frequency ShiftEquipment First Edition

IEC 60268-10 Sound System Equipment Part 10: Peak ProgrammeLevel Meters Second Edition

IEC 60268-11 Sound System Equipment Part 11: Application ofConnectors for the Interconnection of Sound SystemComponents Second Edition; Amendment 1-1989; Amendment 2-1991

IEC 60268-12 Sound System Equipment Part 12: Application ofConnectors for Broadcast and Similar Use SecondEdition; Amendment 1-1991; Amendment 2-1994

IEC TR 60268-13 Sound System Equipment - Part 13: Listening Testson Loudspeakers Second Edition

IEC 60268-14 Sound System Equipment Part 14: Circular andElliptical Loudspeakers; Outer Frame Diameters andMounting Dimensions Second Edition


IEC 60268-15 Sound System Equipment - Part 15: PreferredMatching Values for the Interconnection of SoundSystem Components Third Edition; Replaced by IEC1938: 1996

IEC 60268-16 Sound System Equipment - Part 16: Objective Ratingof Speech Intelligibility by Speech TransmissionIndex Second Edition

IEC 60268-17 Sound System Equipment Part 17: Standard VolumeIndicators First Edition

IEC TR 60268-18 Sound System Equipment Part 18: Peak ProgrammeLevel Meters - Digital Audio Peak Level Meter FirstEdition

IEC 60269-1 Low-Voltage Fuses Part 1: General RequirementsSecond Edition; Corrigendum-1993; Amendment1-1994; Amendment 2-1995; Corrigendum-1996

IEC 60269-2 Low-Voltage Fuses Part 2: SupplementaryRequirements for Fuses for Use by AuthorizedPersons (Fuses Mainly for Industrial Application) Second Edition; Amendment 1-1995; Corrigendum-1996

IEC 60269-2-1 Low-Voltage Fuses - Part 2-1: SupplementaryRequirements for Fuses for Use by AuthorizedPersons (Fuses Mainly for Industrial Application) - Sections I to V: Examples of Types ofStandardized Fuses Third Edition

IEC 60269-3 Low-Voltage Fuses Part 3: SupplementaryRequirements for Fuses for Use by UnskilledPersons (Fuses Mainly for Household and SimilarApplications) Second Edition; Supplement A-1978

IEC 60269-3-1 Low-Voltage Fuses - Part 3-1: SupplementaryRequirements for Fuses for Use by UnskilledPersons (Fuses Mainly for Household and SimilarApplications) - Sections I to IV First Edition; Amendment 1-1995

IEC 60269-4 Low-Voltage Fuses - Part 4: SupplementaryRequirements for Fuse-Links for the Protection ofSemiconductor Devices Third Edition; Amendment1-1995

IEC 60270 Partial Discharge Measurements Second Edition IEC 60273 Characteristics of Indoor and Outdoor Post

Insulators for Systems with Nominal VoltagesGreater Than 1000 V Third Edition

IEC 60276 Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip-Rings FirstEdition; Amendment 1-1987

IEC 60278 Documentation to Be Supplied with ElectronicMeasuring Apparatus First Edition; SupplementA-1974; Replaced by IEC 1187: 1993

IEC 60279 Measurement of the Winding Resistance of an A.C. Machine During Operation at Alternating VoltageFirst Edition

IEC 60281 Magnetic Cores for Application in CoincidentCurrent Matrix Stores Having a Nominal SelectionRatio of 2:1 First Edition; Supplement A-1973; Amendment 1-1975

IEC 60282-1 High-Voltage Fuses Part 1: Current-Limiting FusesFourth Edition; Amendment 1 01 1996; Amendment 2 091997

IEC 60282-2 High-Voltage Fuses - Part 2: Expulsion Fuses SecondEdition; Amendment 1 08 1997

IEC 60282-3 High-Voltage Fuses Part 3: Determination of Short-Circuit Power Factor for Testing Current-LimitingFuses and Expulsion and Similar Fuses First Edition

IEC 60283 Methods for the Measurement of Frequency andEquivalent Resistance of Unwanted Resonances of


Filter Crystal Units First Edition IEC 60285 Alkaline Secondary Cells and Batteries - Sealed

Nickel-Cadmium Cylindrical Rechargeable SingleCells Third Edition; Corrigendum-1993; Amendment1-1995

IEC 60286-1 Packaging of Components for Automatic Handling - Part 1: Tape Packaging of Components with AxialLeads on Continuous Tapes Second Edition

IEC 60286-2 Packaging of Components for Automatic Handling - Part 2: Tape Packaging of Components withUnidirectional Leads on Continuous Tapes SecondEdition

IEC 60286-3 Packaging of Components for Automatic Handling - Part 3: Packaging of Surface Mount Components onContinuous Tapes Third Edition

IEC 60286-4 Packaging of Components for Automatic Handling - Part 4: Stick Magazines for Electronic ComponentsEncapsulated in Packages of Form E and G SecondEdition

IEC 60286-5 Packaging of Components for Automatic Handling Part5: Matrix Trays First Edition

IEC 60287-1-1 Electric Cables - Calculation of the CurrentRating - Part 1: Current Rating Equations (100% Load Factor) and Calculation of Losses - Section1: General First Edition; Supersedes IEC 287: 1982; Amendment 1-08/1995

IEC 60287-1-2 Electric Cables - Calculation of the CurrentRating - Part 1: Current Rating Equations (100% Load Factor) and Calculation of Losses - Section2: Sheath Eddy Current Loss Factors for TwoCircuits in Flat Formation First Edition

IEC 60287-2-1 Electric Cables - Calculation of the CurrentRating - Part 2: Thermal Resistance - Section 1: Calculation of Thermal Resistance First Edition; Supersedes IEC 287: 1982

IEC 60287-2-2 Electric Cables - Calculation of the CurrentRating - Part 2: Thermal Resistance - Section 2: AMethod for Calculating Reduction Factors for Groupsof Cables in Free Air, Protected from SolarRadiation First Edition; Replaces IEC 1042

IEC 60287-3-1 Electric Cables - Calculation of the CurrentRating - Part 3: Sections on Operating Conditions - Section 1: Reference Operating Conditions andSelection of Cable Type First Edition; SupersedesIEC 287: 1982

IEC 60287-3-2 Electric Cables - Calculation of the CurrentRating - Part 3: Sections on Operating Conditions - Section 2: Economic Optimization of Power CableSize First Edition; Supersedes IEC 1059: 1991; Amendment 1-09/1996

IEC 60288-1 Tube and Valve Shields Part 1: General Requirementsand Methods of Test First Edition; Amendment 1-1972

IEC 60288-2 Tube and Valve Shields Part 2: Specification Sheetsfor Shields for Tubes and Valves and Dimensions ofTesting Devices and Gauges for Shields FirstEdition

IEC 60289 Reactors Second Edition; CENELEC EN 60289: 1994 IEC 60290 Evaluation of the Thermal Endurance of Electrical

Insulating Varnishes by the Helical Coil Bond TestFirst Edition; Replaced by IEC 1033: 1991

IEC 60291 Fuse Definitions First Edition; Supplement A-1975 IEC 60294 Measurement of the Dimensions of a Cylindrical

Component Having Two Axial Terminations FirstEdition


IEC 60295 D.C. Periodmeters: Characteristics and Test MethodsFirst Edition

IEC 60296 Specification for Unused Mineral Insulating Oilsfor Transformers and Switchgear Second Edition; Amendment 1-1986

IEC 60297-1 Dimensions of Mechanical Structures of the 482.6mm (19 in) Series Part 1: Panels and Racks ThirdEdition

IEC 60297-2 Dimensions of Mechanical Structures of the 482.6mm (19 Inch) Series Part 2: Cabinets and Pitches ofRack Structures First Edition

IEC 60297-3 Dimensions of Mechanical Structures of the 482,6mm (19 in) Series Part 3: Subracks and AssociatedPlug-In Units First Edition; Amendment 1-1992

IEC 60297-4 Mechanical Structures for Electronic Equipment - Dimensions of Mechanical Structures of the 482,6mm (19 in) Series - Part 4: Subracks and AssociatedPlug-In Units - Additional Dimensions First Edition

IEC 60298 A.C. Metal-Enclosed Switchgear and Controlgear forRated Voltages Above 1 kV and up to and Including52 kV Third Edition; Amendment 1-1994; Corrigendum-1995; Corrigendum-1998

IEC 60299 Household Electric Blankets - Methods for MeasuringPerformance Second Edition

IEC 60300-1 Dependability Management - Part 1: DependabilityProgramme Management First Edition; Replaces IEC300: 1984

IEC 60300-2 Dependability Management - Part 2: DependabilityProgramme Elements and Tasks First Edition

IEC 60300-3-1 Dependability Management Part 3: Application GuideSection 1: Analysis Techniques for Dependability: Guide on Methodology First Edition

IEC 60300-3-2 Dependability Management - Part 3: ApplicationGuide - Section 2: Collection of Dependability Datafrom the Field First Edition

IEC 60300-3-3 Dependability Management - Part 3: ApplicationGuide - Section 3: Life Cycle Costing First Edition

IEC 60300-3-4 Dependability Management - Part 3: ApplicationGuide - Section 4: Guide to the Specification ofDependability Requirements First Edition

IEC 60300-3-6 Dependability Management - Part 3: ApplicationGuide - Section 6: Software Aspects ofDependability First Edition

IEC 60300-3-9 Dependability Management - Part 3: ApplicationGuide - Section 9: Risk Analysis of TechnologicalSystems First Edition

IEC 60301 Preferred Diameters of Wire Terminations ofCapacitors and Resistors Second Edition; Amendment1-1972

IEC 60302 Standard Definitions and Methods of Measurement forPiezoelectric Vibrators Operating over theFrequency Range up to 30 MHz First Edition; Errata-02/1971

IEC 60303 IEC Provisional Reference Coupler for theCalibration of Earphones Used in Audiometry FirstEdition

IEC 60304 Standard Colours for Insulation for Low-FrequencyCables and Wires Third Edition

IEC 60305 Insulators for Overhead Lines with a NominalVoltage Above 1 000 V - Ceramic or Glass InsulatorUnits for A.C. Systems - Characteristics ofInsulator Units of the Cap and Pin Type FourthEdition

IEC 60306-1 Measurement of Photosensitive Devices Part 1: Basic


Recommendations First Edition IEC 60306-2 Measurement of Photosensitive Devices Part 2:

Methods of Measurement of Phototubes First Edition IEC 60306-3 Measurement of Photosensitive Devices Part 3:

Methods of Measurement of Photoconductive Cells forUse in the Visible Spectrum First Edition

IEC 60306-4 Measurement of Photosensitive Devices Part 4: Methods of Measurement for Photomultipliers FirstEdition

IEC 60308 International Code for Testing of Speed GoverningSystems for Hydraulic Turbines First Edition

IEC 60309-1 Plugs, Socket-Outlets and Couplers for IndustrialPurposes - Part 1: General Requirements ThirdEdition

IEC 60309-2 Plugs, Socket-Outlets and Couplers for IndustrialPurposes - Part 2: Dimensional InterchangeabilityRequirements for Pin and Contact-Tube AccessoriesThird Edition

IEC 60309-3 Plugs, Socket-Outlets and Couplers for IndustrialPurposes - Part 3: Particular Requirements forPlugs, Socket-Outlets, Connectors and ApplianceInlets for Use in Explosive Gas Atmospheres FirstEdition

IEC 60310 Traction Transformers and Inductors Second Edition IEC 60311 Electric Irons for Household or Similar Use

- Methods for Measuring Performance Edition 3.1 IEC 60312 Vacuum Cleaners for Household Use - Methods of

Measuring the Performance Third Edition IEC 60313 Coaxial Cable Connectors Used in Nuclear

Instrumentation Second Edition IEC 60314 Temperature Control Devices for Quartz Crystal

Units First Edition; Supplement A-1971; Amendment1-1979

IEC 60315-1 Methods of Measurement on Radio Receivers forVarious Classes of Emission; Part 1: GeneralConsiderations and Methods of Measurement, Including Audio-Frequency Measurements SecondEdition; Corrigendum-1997

IEC 60315-3 Methods of Measurement on Radio Receivers forVarious Classes of Emission Part 3: Receivers forAmplitude-Modulated Sound-Broad-Casting EmissionsSecond Edition; Corrigendum-03/1994

IEC 60315-4 Methods of Measurement on Radio Receivers forVarious Classes of Emission - Part 4: Receivers forFrequency-Modulated Sound Broadcasting EmissionsSecond Edition

IEC 60315-5 Methods of Measurement on Radio Receivers forVarious Classes of Emission Part 5: SpecializedRadio-Frequency Measurements. Measurement onFrequency-Modulated Receivers of the Response toImpulsive Interference, Recommendation FirstEdition

IEC 60315-6 Methods of Measurement on Radio Receivers forVarious Classes of Emission Part 6: General PurposeCommunication Receivers First Edition; Corrigendum-02/1997

IEC 60315-7 Methods of Measurement on Radio Receivers forVarious Classes of Emission - Part 7: Methods ofMeasurement on Digital Satellite Radio (DSR) Receivers First Edition; Corrigendum-1995

IEC 60315-8 Methods of Measurement on Radio Receivers forVarious Classes of Emission Part 8: Radio-FrequencyMeasurements on Professional Receivers forFrequency-Modulated Telegraphy Systems First


Edition IEC 60315-9 Methods of Measurement on Radio Receivers for

Various Classes of Emission - Part 9: Measurementof the Characteristics Relevant to Radio DataSystem (RDS) Reception First Edition

IEC 60317-0-1 Specifications for Particular Types of WindingWires - Part 0: General Requirements - Section 1: Enamelled Round Copper Wire Second Edition

IEC 60317-0-2 Specifications for Particular Types of WindingWires - Part 0: General Requirements - Section 2: Enamelled Rectangular Copper Wire Second Edition

IEC 60317-0-3 Specifications for Particular Types of WindingWires - Part 0: General Requirements - Section 3: Enamelled Round Aluminium Wire Second Edition

IEC 60317-0-4 Specifications for Particular Types of WindingWires - Part 0: General Requirements - Section 4: Glass-Fibre Wound Resins or Varnish Impregnated, Bare or Enamelled Rectangular Copper Wire SecondEdition

IEC 60317-0-5 Specifications for Particular Types of WindingWires Part 0: General Requirements Section 5 - Glass-Fibre Braided, Bare or EnamelledRectangular Copper Wire First Edition; Amendment1-1997

IEC 60317-1 Specifications for Particular Types of WindingWires Part 1: Polyvinyl Acetal Enamelled RoundCopper Wire, Class 105 Third Edition; Amendment1-1997; Amendment 2-1997

IEC 60317-2 Specifications for Particular Types of WindingWires Part 2: Solderable Polyurethane EnamelledRound Copper Wire, Class 130, with a Bonding LayerThird Edition; Amendment 2-1997

IEC 60317-3 Specifications for Particular Types of WindingWires Part 3: Polyester Enamelled Round CopperWire, Class 155 Second Edition; Amendment 1-1997

IEC 60317-4 Specifications for Particular Types of WindingWires Part 4: Solderable Polyurethane EnamelledRound Copper Wire, Class 130 Third Edition; Amendment 1-1997

IEC 60317-7 Specifications for Particular Types of WindingWires Part 7: Polyimide Enamelled Round CopperWire, Class 220 Third Edition; Amendment 1-1997; Amendment 2-1997

IEC 60317-8 Specifications for Particular Types of WindingWires Part 8: Polyesterimide Enamelled Round CopperWire, Class 180 Third Edition; Amendment 1-1997; Amendment 2-1997

IEC 60317-10 Specifications for Particular Types of WindingWires Part 10: Enamelled Round Copper Wires with aTemperature Index of 180 for Use in RefrigerantSystems First Edition; Supplement A-1978; Amendment1-1997

IEC 60317-11 Specifications for Particular Types of WindingWires Part 11: Bunched Solderable PolyurethaneEnamelled Round Copper Wires, Class 130, with SilkCovering Second Edition; Amendment 1-1993; Amendment 2-1997

IEC 60317-12 Specifications for Particular Types of WindingWires Part 12: Polyvinyl Acetal Enamelled RoundCopper Wire, Class 120 Second Edition; Amendment1-1997

IEC 60317-13 Specifications for Particular Types of WindingWires Part 13: Polyester or PolyesterimideOvercoated with Polyamide-Imide Enamelled RoundCopper Wire, Class 200 Second Edition; Amendment


1-1997; Amendment 2-1997 IEC 60317-14 Specifications for Particular Types of Winding

Wires Part 14: Polyvinyl Acetal Enamelled RoundAluminium Wire, Class 105 Second Edition; Amendment1-1997

IEC 60317-15 Specifications for Particular Types of WindingWires Part 15: Polyesterimide Enamelled RoundAluminium Wire, Class 180 Second Edition; Amendment1-1997

IEC 60317-16 Specifications for Particular Types of WindingWires Part 16: Polyester Enamelled RectangularCopper Wire, Class 155 Second Edition; Amendment1-1997

IEC 60317-17 Specifications for Particular Types of WindingWires Part 17: Polyvinyl Acetal EnamelledRectangular Copper Wire, Class 105 Second Edition; Amendment 1-1997

IEC 60317-18 Specifications for Particular Types of WindingWires Part 18: Polyvinyl Acetal EnamelledRectangular Copper Wire, Class 120 Second Edition; Amendment 1-1997

IEC 60317-19 Specifications for Particular Types of WindingWires Part 19: Solderable Polyurethane EnamelledRound Copper Wire Overcoated with Polyamide, Class130 Second Edition; Amendment 1-1997

IEC 60317-20 Specifications for Particular Types of WindingWires Part 20: Solderable Polyurethane EnamelledRound Copper Wire, Class 155 Second Edition; Amendment 1-1997

IEC 60317-21 Specifications for Particular Types of WindingWires Part 21: Solderable Polyurethane EnamelledRound Copper Wire Overcoated with Polyamide, Class155 Second Edition; Amendment 1-1997

IEC 60317-22 Specifications for Particular Types of WindingWires Part 22: Polyester or PolyesterimideEnamelled Round Copper Wire Overcoated withPolyamide, Class 180 Second Edition; Amendment1-1997

IEC 60317-23 Specifications for Particular Types of WindingWires Part 23: Solderable Polyesterimide EnamelledRound Copper Wire, Class 180 Second Edition; Amendment 1-1997

IEC 60317-24 Specifications for Particular Types of WindingWires Part 24: Polyester or PolyesterimideEnamelled Round Aluminium Wire Overcoated withPolyamide, Class 180 Second Edition; Amendment1-1997

IEC 60317-25 Specifications for Particular Types of WindingWires Part 25: Polyester or PolyesterimideOvercoated with Polyamide-Imide Enamelled RoundAluminium Wire, Class 200 Second Edition; Amendment1-1997; Amendment 2-1997

IEC 60317-26 Specifications for Particular Types of WindingWires Part 26: Polyamide-Imide Enamelled RoundCopper Wire, Class 200 Second Edition; Amendment1-1997

IEC 60317-27 Specifications for Particular Types of WindingWires - Part 27: Paper Covered Rectangular CopperWire Third Edition

IEC 60317-28 Specifications for Particular Types of WindingWires Part 28: Polyesterimide Enamelled RectangularCopper Wire, Class 180 First Edition; Amendment1-1997

IEC 60317-29 Specifications for Particular Types of WindingWires Part 29: Polyester or Polyesterimide


Overcoated with Polyamide-Imide EnamelledRectangular Copper Wire, Class 200 First Edition; Amendment 1-1997

IEC 60317-30 Specifications for Particular Types of WindingWires Part 30: Polyimide Enamelled RectangularCopper Wire, Class 220 First Edition; Amendment1-1997

IEC 60317-31 Specifications for Particular Types of WindingWires Part 31: Glass-Fibre Wound, Polyester orPolyesterimide Varnish-Treated, Bare or EnamelledRectangular Copper Wire, Temperature Index 180First Edition; Amendment 1 08 1997

IEC 60317-32 Specifications for Particular Types of WindingWires Part 32: Glass-Fibre Wound, Polyester orPolyesterimide Varnish-Treated, Bare or EnamelledRectangular Copper Wire, Temperature Index 155First Edition; Amendment 1 08 1997

IEC 60317-33 Specifications for Particular Types of WindingWires Part 33: Glass-Fibre Wound, Silicone Varnish-Treated, Bare or Enamelled Rectangular CopperWire, Temperature Index 200 First Edition; Amendment 1 08 1997

IEC 60317-34 Specifications for Particular Types of WindingWires - Part 34: Polyester Enamelled Round CopperWire, Class 130 L Second Edition

IEC 60317-35 Specifications for Particular Types of WindingWires Part 35: Solderable Polyurethane EnamelledRound Copper Wire, Class 155, with a Bonding LayerFirst Edition; Amendment 1-1997

IEC 60317-36 Specifications for Particular Types of WindingWires Part 36: Solderable Polyesterimide EnamelledRound Copper Wire, Class 180, with a Bonding LayerFirst Edition; Amendment 1-1997

IEC 60317-37 Specifications for Particular Types of WindingWires Part 37: Polyesterimide Enamelled RoundCopper Wire, Class 180, with a Bonding Layer FirstEdition; Amendment 1-1997

IEC 60317-38 Specifications for Particular Types of WindingWires Part 38: Polyester or PolyesterimideOvercoated with Polyamide-Imide Enamelled RoundCopper Wire, Class 200, with a Bonding Layer FirstEdition; Amendment 1-1997

IEC 60317-39 Specifications for Particular Types of WindingWires Part 39: Glass-Fibre Braided, Polyester orPolyesterimide Varnish-Treated, Bare or EnamelledRectangular Copper Wire, Temperature Index 80 FirstEdition; Amendment 1-1997

IEC 60317-40 Specifications for Particular Types of WindingWires Part 40: Glass-Fibre Braided, SiliconeVarnish-Treated, Bare or Enamelled RectangularCopper Wire, Temperature Index 200 First Edition; Amendment 1-1997

IEC 60317-41 Specifications for Particular Types of WindingWires - Part 41: Solderable Polyester EnamelledRound Copper Wire, Class 130L First Edition

IEC 60317-42 Specifications for Particular Types of WindingWires - Part 42: Polyester-Amide-Imide EnamelledRound Copper Wire, Class 200 First Edition

IEC 60317-43 Specifications for Particular Types of WindingWires - Part 43: Aromatic Polyimide Tape WrappedRound Copper Wire, Class 240 First Edition

IEC 60317-44 Specifications for Particular Types of WindingWires - Part 44: Aromatic Polyimide Tape WrappedRectangular Copper Wire, Class 240 First Edition

IEC 60317-45 Specifications for Particular Types of Winding


Wires - Part 45: Polyester Enamelled Round CopperWire, Class 130 First Edition

IEC 60317-46 Specifications for Particular Types of WindingWire - Part 46: Aromatic Polyimide Enamelled RoundCopper Wire, Class 240 First Edition

IEC 60317-47 Specifications for Particular Types of WindingWires - Part 47: Aromatic Polyimide EnamelledRectangular Copper Wire, Class 240 First Edition

IEC 60318 IEC Artificial Ear, of the Wide Band Type, for theCalibration of Earphones Used in Audiometry FirstEdition

IEC 60319 Presentation of Reliability Data on ElectronicComponents (or Parts) Second Edition

IEC 60320 Appliance Couplers for Household and SimilarGeneral Purposes Second Edition; Amendment 3-1987, Incorporating Amendments 1 and 2; Replaced by IEC320-1: 1994

IEC 60320-1 Appliance Couplers for Household and SimilarGeneral Purposes - Part 1: General RequirementsFirst Edition; Amendment 1-1995; Amendment 2-1996; Cancels and Replaces IEC 320: 1981

IEC 60320-2-1 Appliance Couplers for Household and SimilarGeneral Purposes Part 2: Sewing Machine CouplersFirst Edition

IEC 60320-2-2 Appliance Couplers for Household and SimilarGeneral Purposes; Part 2: Interconnection Couplersfor Household and Similar Equipment First Edition; Corrigendum-08/1990; Amendment 1-1994; Amendment2-1997

IEC 60321 Guidance for the Design and Use of ComponentsIntended for Mounting on Boards with Printed Wiringand Printed Circuits First Edition; Amendment1-1975

IEC 60321-2 Auxiliary Printed Board Information Part 2: Rework, Repair, Modifications First Edition

IEC 60321-3 Auxiliary Printed Board Information Part 3: Guidelines for Artwork First Edition

IEC 60322 Rules for Ohmic Resistors Used in the PowerCircuits of Electrically Powered Vehicles FirstEdition

IEC 60323 Analogue Voltage Ranges and Logic Levels for MainsOperated Nuclear Instruments First Edition; Amendment 1-1974

IEC 60324 Ceramic Dielectric Capacitors Type 3 First Edition IEC 60325 Alpha, Beta and Alpha-Beta Contamination Meters and

Monitors Second Edition IEC 60326-1 Printed Boards Part 1: General Information for the

Specification Writer First Edition; Replaced by2326-1: 1996

IEC 60326-2 Printed Boards Part 2: Test Methods Third Edition; Amendment 1-1992

IEC 60326-3 Printed Boards Part 3: Design and Use of PrintedBoards Second Edition; Incorporating Supplement Aand Amendment 1

IEC 60326-4 Printed Boards Part 4: Specification for Single andDouble Sided Printed Boards with Plain Holes FirstEdition; Amendment 1-1989

IEC 60326-5 Printed Boards Part 5: Specification for Single andDouble Sided Printed Boards with Plated-ThroughHoles First Edition; Amendment 1-1989

IEC 60326-6 Printed Boards Part 6: Specification for MultilayerPrinted Boards First Edition; Amendment 1-1983; Amendment 2-1990

IEC 60326-7 Printed Boards Part 7: Specification for Single and


Double Sided Flexible Printed Boards withoutThrough Connections First Edition; Amendment 1-1989

IEC 60326-8 Printed Boards Part 8: Specification for Single andDouble Sided Flexible Printed Boards with ThroughConnections First Edition; Amendment 1-1989

IEC 60326-9 Printed Boards Part 9: Specification for FlexibleMultilayer Printed Boards with Through ConnectionsFirst Edition

IEC 60326-10 Printed Boards Part 10: Specification for Flex-Rigid Double-Sided Printed Boards with ThroughConnections First Edition

IEC 60326-11 Printed Boards Part 11: Specification for Flex-Rigid Multilayer Printed Boards with ThroughConnections First Edition

IEC 60326-12 Printed Boards Part 12: Specification for MassLamination Panels (Semi-Manufactured MultilayerPrinted Boards) First Edition

IEC 60329 Strip-Wound Cut Cores of Grain Oriented Silicon-Iron Alloy, Used for Electronic andTelecommunication Equipment Second Edition

IEC 60331 Fire-Resisting Characteristics of Electric CablesFirst Edition

IEC 60332-1 Tests on Electric Cables Under Fire Conditions Part1: Test on a Single Vertical Insulated Wire orCable Third Edition; Corrigendum-05/1993

IEC 60332-2 Tests on Electric Cables Under Fire Conditions Part2: Test on a Single Small Vertical Insulated CopperWire or Cable First Edition

IEC 60332-3 Tests on Electric Cables under Fire Conditions Part3: Tests on Bunched Wires or Cables Second Edition

IEC 60333 Nuclear Instrumentation - Semiconductor Charged-Particle Detectors - Test Procedures Third Edition

IEC 60334-1 Air Dielectric Rotary Variable Capacitors Part 1: General Requirements for Tests and MeasuringMethods First Edition; Supplement A-1974

IEC 60335-1 Safety of Household and Similar ElectricalAppliances Part 1: General Requirements ThirdEdition; I-SH 01-02/1993; I-SH 02-08/1994; Amendment 1-1994

IEC 60335-2-2 Safety of Household and Similar ElectricalAppliances - Part 2-2: Particular Requirements forVacuum Cleaners and Water Suction CleaningAppliances Edition 4.1

IEC 60335-2-3 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forElectric Irons Fourth Edition; I-SH 1996

IEC 60335-2-4 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forSpin Extractors Fourth Edition; Amendment 1-1997

IEC 60335-2-5 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forDishwashers Fourth Edition; I-SH 1996

IEC 60335-2-6 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forStationary Cooking Ranges, Hobs, Ovens and SimilarAppliances Fourth Edition; Corrigendum-1998

IEC 60335-2-7 Safety of Household and Similar ElectricalAppliances - Part 2-7: Particular Requirements forWashing Machines Edition 4.1

IEC 60335-2-8 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forShavers, Hair Clippers and Similar AppliancesFourth Edition

IEC 60335-2-9 Safety of Household and Similar Electrical


Appliances - Part 2-9: Particular Requirements forGrills, Toasters and Similar Portable CookingAppliances Edition 4.1

IEC 60335-2-10 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forFloor Treatment Machines and Wet Scrubbing MachinesFourth Edition

IEC 60335-2-11 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forTumbler Dryers Fourth Edition; Amendment 1-1998

IEC 60335-2-12 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forWarming Plates and Similar Appliances FourthEdition

IEC 60335-2-13 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for DeepFat Fryers, Frying Pans and Similar AppliancesFourth Edition; Amendment 1-1996

IEC 60335-2-14 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forKitchen Machines Third Edition

IEC 60335-2-15 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forAppliances for Heating Liquids Fourth Edition; I-SH06/1996; I-SH 09/1996

IEC 60335-2-16 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for FoodWaste Disposers Fourth Edition

IEC 60335-2-18 Safety of Household and Similar ElectricalAppliances Part 2: Guide for Preparing SafetyRequirements for Battery-Powered Motor-OperatedAppliances and Their Charging and BatteryAssemblies Second Edition

IEC 60335-2-19 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forBattery-Powered Shavers, Hair Clippers and SimilarAppliances and Their Charging and BatteryAssemblies Second Edition

IEC 60335-2-20 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forBattery-Powered Tooth-Brushes and Their Chargingand Battery Assemblies Second Edition

IEC 60335-2-21 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forStorage Water Heaters Fourth Edition; Corrigendum-1998

IEC 60335-2-23 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forAppliances for Skin or Hair Care Fourth Edition; Corrigendum- 1998

IEC 60335-2-24 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forRefrigerating Appliances and Ice-Makers FourthEdition

IEC 60335-2-25 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forMicrowave Ovens Fourth Edition

IEC 60335-2-26 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forClocks Third Edition

IEC 60335-2-27 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forAppliances for Skin Exposure to Ultraviolet andInfrared Radiation Third Edition



Appliances Part 2: Particular Requirements forSewing Machines Third Edition

IEC 60335-2-29 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forBattery Chargers Third Edition

IEC 60335-2-30 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forRoom Heaters Third Edition

IEC 60335-2-31 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forRange Hoods Third Edition

IEC 60335-2-32 Safety of Household and Similar ElectricalAppliances; Part 2: Particular Requirements forMassage Appliances Third Edition

IEC 60335-2-34 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forMotor-Compressors Second Edition

IEC 60335-2-35 Safety of Household and Similar ElectricalAppliances - Part 2-35: Particular Requirements forInstantaneous Water Heaters Third Edition

IEC 60335-2-36 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Cooking Ranges, Ovens, Hobs andHob Elements Third Edition; Amendment 1-1996

IEC 60335-2-37 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Deep Fat Fryers Third Edition; Amendment 1-1996

IEC 60335-2-38 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Griddles and Griddle GrillsThird Edition; Amendment 1-1996

IEC 60335-2-39 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Multi-Purpose Cooking PansThird Edition; Amendment 1-1996

IEC 60335-2-40 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forElectrical Heat Pumps, Air-Conditioners andDehumidifiers Third Edition

IEC 60335-2-41 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forPumps for Liquids Having a Temperature NotExceeding 35 Degrees C Second Edition

IEC 60335-2-42 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Forced Convection Ovens, SteamCookers and Steam-Convection Ovens Third Edition; Amendment 1-1996

IEC 60335-2-43 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forClothes Dryers and Towel Rails Second Edition

IEC 60335-2-44 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forIroners Second Edition

IEC 60335-2-45 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forPortable Heating Tools and Similar AppliancesSecond Edition

IEC 60335-2-47 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Boiling Pans Second Edition; Amendment 1-1996



Appliances Part 2: Particular Requirements forCommercial Electric Grillers and Toasters SecondEdition; Amendment 1-1996

IEC 60335-2-49 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Hot Cupboards Second Edition; Amendment 1-1996

IEC 60335-2-50 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Bains-Marie Second Edition; Amendment 1-1996

IEC 60335-2-51 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forStationary Circulation Pumps for Heating andService Water Installations Second Edition

IEC 60335-2-52 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for OralHygiene Appliances Second Edition

IEC 60335-2-53 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forSauna Heating Appliances Second Edition

IEC 60335-2-54 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forSurface-Cleaning Appliances Employing LiquidsSecond Edition

IEC 60335-2-55 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forElectrical Appliances for Use with Aquariums andGarden Ponds Second Edition

IEC 60335-2-56 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forProjectors and Similar Appliances Second Edition; BS EN 60335-2-56: 1997

IEC 60335-2-57 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for Ice-Cream Appliances with Incorporated Motor-Compressors First Edition

IEC 60335-2-58 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Dishwashing Machines SecondEdition

IEC 60335-2-59 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forInsect Killers Second Edition

IEC 60335-2-60 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forWhirlpool Baths Second Edition

IEC 60335-2-61 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forThermal Storage Room Heaters First Edition

IEC 60335-2-62 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Rinsing Sinks Second Edition

IEC 60335-2-63 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Water Boilers and LiquidHeaters First Edition

IEC 60335-2-64 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Electric Kitchen Machines Second Edition

IEC 60335-2-65 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for Air-Cleaning Appliances First Edition



Appliances Part 2: Particular Requirements forWater-Bed Heaters First Edition

IEC 60335-2-67 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forFloor Treatment and Floor Cleaning Machines, forIndustrial and Commercial Use Second Edition

IEC 60335-2-68 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forSpray Extraction Appliances, for Industrial andCommercial Use Second Edition

IEC 60335-2-69 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forWet and Dry Vacuum Cleaners, Including PowerBrush, for Industrial and Commercial Use SecondEdition

IEC 60335-2-70 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forMilking Machines First Edition

IEC 60335-2-71 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forElectrical Heating Appliances for Breeding andRearing Animals First Edition; Amendment 1-1996

IEC 60335-2-72 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forAutomatic Machines for Floor Treatment forCommercial and Industrial Use First Edition

IEC 60335-2-73 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forFixed Immersion Heaters First Edition

IEC 60335-2-74 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forPortable Immersion Heaters First Edition

IEC 60335-2-75 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forCommercial Dispensing Appliances and VendingMachines First Edition

IEC 60335-2-76 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forElectric Fence Energizers First Edition; ReplacesIEC 61011, IEC 61011-1, IEC 61011-2 and TheirAmendments

IEC 60335-2-77 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forPedestrian Controlled Mains-Operated LawnmowersFirst Edition

IEC 60335-2-78 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forOutdoor Barbecues First Edition

IEC 60335-2-79 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for HighPressure Cleaners and Steam Cleaners, forIndustrial and Commercial Use First Edition

IEC 60335-2-80 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for FansFirst Edition; Replaces IEC 60342-1 and 60342-3

IEC 60335-2-81 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements for FootWarmers and Heating Mats First Edition; Corrigendum-1998

IEC 60335-2-85 Safety of Household and Similar ElectricalAppliances - Part 2-85: Particular Requirements forFabric Steamers First Edition

IEC 60335-2-88 Safety of Household and Similar ElectricalAppliances; Part 2: Particular Requirements for


Humidifiers Intended for Use with Heating, Ventilation, or Air-Conditioning Systems FirstEdition

IEC 60335-2-90 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forCommercial Microwave Ovens First Edition

IEC 60335-2-91 Safety of Household and Similar ElectricalAppliances - Part 2-91: Particular Requirements forWalk-Behind and Hand-Held Lawn Trimmers and LawnEdge Trimmers First Edition

IEC 60335-2-95 Safety of Household and Similar ElectricalAppliances - Part 2-95: Particular Requirements forDrives for Vertically Moving Garage Doors forResidential Use First Edition

IEC 60335-2-97 Safety of Household and Similar ElectricalAppliances - Part 2-97: Particular Requirements forDrives for Rolling Shutters, Awnings, Blinds andSimilar Equipment First Edition

IEC 60335-2-98 Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forHumidifiers First Edition

IEC 60335-22 Safety of Household and Similar ElectricalAppliances Particular Requirements for ElectricToys (Mains-Operated) First Edition

IEC 60335-25 Safety of Household and Similar ElectricalAppliances Part 2: Particular Requirements forMicrowave Cooking Appliances First Edition

IEC 60336 X-Ray Tube Assemblies for Medical Diagnosis - Characteristics of Focal Spots Third Edition

IEC 60338 Telemetering for Consumption and Demand FirstEdition

IEC 60339-1 General Purpose Rigid Coaxial Transmission Linesand Their Associated Flange Connectors Part 1: General Requirements and Measuring Methods FirstEdition

IEC 60339-2 General Purpose Rigid Coaxial Transmission Linesand Their Associated Flange Connectors Part 2: Detail Specifications Second Edition

IEC 60341-1 Push-Button Switches Part 1: General Requirementsand Measuring Methods First Edition; SupplementA-1973

IEC 60341-2 Push-Button Switches Part 2: General Rules forDrafting Specification Sheets for Push-ButtonSwitches of the Multi-Cell Type First Edition

IEC 60341-3 Push-Button Switches Part 3: Push-Button Switchesof the Multi-Cell Type First Edition

IEC 60342-2 Safety Requirements for Electric Fans andRegulators Part 2: Fans and Regulators for Use inShips Second Edition

IEC 60343 Recommended Test Methods for Determining theRelative Resistance of Insulating Materials toBreakdown by Surface Discharges Second Edition; CENELEC EN 60343: 1992

IEC 60344 Guide to the Calculation of Resistance of Plain andCoated Copper Conductors of Low-Frequency Cablesand Wires Second Edition; Amendment 1-1985

IEC 60345 Method of Test for Electrical Resistance andResistivity of Insulating Materials at ElevatedTemperatures First Edition

IEC 60347 Transverse Track Video Recorders Second Edition IEC 60349 Electric Traction Rotating Electrical Machines for

Rail and Road Vehicles Second Edition IEC 60349-2 Electric Traction - Rotating Electrical Machines

for Rail and Road Vehicles - Part 2: Electronic


Convertor-Fed Alternating Current Motors FirstEdition; CENELEC EN 60349-2: 1994

IEC TR 60349-3 Electric Traction - Rotating Electrical Machinesfor Rail and Road Vehicles - Part 3: Determinationof the Total Losses of Convertor-Fed AlternatingCurrent Motors by Summation of the Component LossesFirst Edition

IEC 60350 Methods for Measuring Performance of HouseholdElectric Ranges and Ovens First Edition

IEC 60351-1 Expression of the Properties of Cathode-RayOscilloscopes Part 1: General First Edition

IEC 60351-2 Expression of the Properties of Cathode-RayOscilloscopes Part 2: Storage Oscilloscopes FirstEdition

IEC 60352-1 Solderless Connections Part 1: Solderless WrappedConnections - General Requirements, Test Methodsand Practical Guidance Second Edition

IEC 60352-2 Solderless Connections Part 2: Solderless CrimpedConnections - General Requirements, Test Methodsand Practical Guidance First Edition; Amendment1-1996

IEC 60352-3 Solderless Connections Part 3: SolderlessAccessible Insulation Displacement Connections - General Requirements, Test Methods and PracticalGuidance First Edition; Corrigendum-1995

IEC 60352-4 Solderless Connections - Part 4: Solderless Non-Accessible Insulation Displacement Connections - General Requirements, Test Methods and PracticalGuidance First Edition

IEC 60352-5 Solderless Connections - Part 5: Solderless Press-In Connections - General Requirements, Test Methodsand Practical Guidance First Edition

IEC 60352-6 Solderless Connections - Part 6: InsulationPiercing Connections - General Requirements, TestMethods and Practical Guidance First Edition

IEC 60353 Line Traps for A.C. Power Systems Second Edition IEC 60354 Loading Guide for Oil-Immersed Power Transformers

Second Edition; Corrigendum-03/1992 IEC 60355 Appraisal of the Problems of Accelerated Testing

for Atmospheric Corrosion First Edition IEC 60356 Dimensions for Commutators and Slip-Rings First

Edition IEC 60357 Tungsten Halogen Lamps (Non-Vehicle) Second

Edition; Amendment 1-1984; Amendment 2-1985; Amendment 3-1987; Amendment 4-1989; Amendment5-1992; Corrigendum-06/92; Corrigendum-11/92; Amendment 6-1993; Amendment 7-1994; Amendment8-1995; Amendment 9-1996; Amendment 10-1996; Amendment 11-1997

IEC 60358 Coupling Capacitors and Capacitor Dividers SecondEdition

IEC 60359 Expression of the Performance of Electrical andElectronic Measuring Equipment Second Edition; Amendment 1-1991

IEC 60360 Standard Method of Measurement of Lamp CapTemperature Rise Second Edition; Amendment 1-1993; Amendment 2-1996

IEC 60363 Short-Circuit Current Evaluation with SpecialRegard to Rated Short-Circuit Capacity of Circuit-Breakers in Installations in Ships First Edition

IEC 60364-1 Electrical Installations of Buildings Part 1: Scope, Object and Fundamental Principles ThirdEdition

IEC 60364-2-21 Electrical Installations of Buildings Part 2:


Definitions Chapter 21: Guide to General TermsFirst Edition

IEC 60364-3 Electrical Installations of Buildings Part 3: Assessment of General Characteristics SecondEdition; Amendment 1-1994

IEC 60364-4-41 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 41: ProtectionAgainst Electric Shock Third Edition; Amendment1-1996

IEC 60364-4-42 Electrical Installations of Buildings Part 4: Protection of Safety Chapter 42: Protection AgainstThermal Effects First Edition

IEC 60364-4-43 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 43: ProtectionAgainst Overcurrent First Edition; Amendment 1 081997

IEC 60364-4-45 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 45: ProtectionAgainst Undervoltage First Edition

IEC 60364-4-46 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 46: Isolation andSwitching First Edition

IEC 60364-4-47 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 47: Application ofProtective Measures for Safety Section 470: GeneralSection 471: Measures of Protection AgainstElectric Shock First Edition; Amendment 1-1993

IEC 60364-4-442 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 44: ProtectionAgainst Overvoltages Section 442 - Protection ofLow-Voltage Installations Against Faults betweenHigh-Voltage Systems and Earth First Edition; Amendment 1-1995

IEC 60364-4-443 Electrical Installations of Buildings - Part 4: Protection for Safety - Chapter 44: ProtectionAgainst Overvoltages - Section 443: ProtectionAgainst Overvoltages of Atmospheric Origin or Dueto Switching Second Edition

IEC 60364-4-444 Electrical Installations of Buildings - Part 4: Protection for Safety - Chapter 44: ProtectionAgainst Overvoltages - Section 444: ProtectionAgainst Electromagnetic Interferences (EMI) inInstallations of Buildings First Edition

IEC 60364-4-473 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 47: Application ofProtective Measures for Safety Section 473 - Measures of Protection Against Overcurrent FirstEdition

IEC 60364-4-481 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 48: Choice ofProtective Measures as a Function of ExternalInfluences Section 481 - Selection of Measures forProtection Against Electric Shock in Relation toExternal Influences First Edition

IEC 60364-4-482 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 48: Choice ofProtective Measures as a Function of ExternalInfluences Section 482 - Protection Against FireFirst Edition

IEC 60364-5-51 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 51: Common Rules Third Edition

IEC 60364-5-52 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 52: Wiring Systems First Edition;


Amendment 1-1997 IEC 60364-5-53 Electrical Installations of Buildings - Part 5:

Selection and Erection of Electrical Equipment - Chapter 53: Switchgear and Controlgear SecondEdition

IEC 60364-5-54 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical EquipmentChapter 54: Earthing Arrangements and ProtectiveConductors First Edition; Amendment 1-1982

IEC 60364-5-56 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical EquipmentChapter 56: Safety Services First Edition

IEC 60364-5-523 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical EquipmentChapter 52: Wiring Systems Section 523 - Current-Carrying Capacities First Edition

IEC 60364-5-534 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Section 534: Devices for Protection AgainstOvervoltages First Edition

IEC 60364-5-537 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical EquipmentChapter 53: Switchgear and Controlgear Section 537 - Devices for Isolation and Switching FirstEdition; Amendment 1-1989

IEC 60364-5-548 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 548: Earthing Arrangements andEquipotential Bonding for Information TechnologyInstallations First Edition

IEC 60364-5-551 Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment - Chapter 55: Other Equipment - Section 551: Low-Voltage Generating Sets First Edition

IEC 60364-6-61 Electrical Installations of Buildings Part 6: Verification Chapter 61: Initial Verification FirstEdition; Amendment 1 08 1993; Amendment 2 08 1997

IEC 60364-7-701 Electrical Installations of Buildings Part 7: Requirements for Special Installations or LocationsSection 701: Locations Containing a Bath Tub orShower Basin First Edition

IEC 60364-7-702 Electrical Installations of Buildings - Part 7: Requirements for Special Installations orLocations - Section 702: Swimming Pools and OtherBasins Second Edition

IEC 60364-7-703 Electrical Installations of Buildings Part 7: Requirements for Special Installations or LocationsSection 703 - Locations Containing Sauna HeatersFirst Edition

IEC 60364-7-704 Electrical Installations of Buildings Part 7: Requirements for Special Installations or LocationsSection 704 - Construction and Demolition SiteInstallations First Edition

IEC 60364-7-705 Electrical Installations of Buildings Part 7: Requirements for Special Installations or LocationsSection 705 - Electrical Installations ofAgricultural and Horticultural Premises FirstEdition

IEC 60364-7-706 Electrical Installations of Buildings Part 7: Requirements for Special Installations or LocationsSection 706 - Restrictive Conducting LocationsFirst Edition

IEC 60364-7-707 Electrical Installations of Buildings Part 7: Requirements for Special Installations or LocationsSection 707 - Earthing Requirements for the


Installation of Data Processing Equipment FirstEdition

IEC 60364-7-708 Electrical Installations of Buildings Part 7: Requirements for Special Installations orLocations - Section 708: Electrical Installationsin Caravan Parks and Caravans First Edition; Amendment 1-1993

IEC 60364-7-709 Electrical Installations of Buildings - Part 7: Requirements for Special Installations orLocations - Section 709: Marinas and Pleasure CraftFirst Edition

IEC 60364-7-711 Electrical Installations of Buildings - Part7-711: Requirements for Special Installations orLocations - Exhibitions, Shows and Stands FirstEdition

IEC 60364-7-713 Electrical Installations of Buildings - Part 7: Requirements for Special Installations andLocations - Section 713: Furniture First Edition

IEC 60364-7-714 Electrical Installations of Buildings - Part 7: Requirements for Special Installations orLocations - Section 714: External LightingInstallations First Edition

IEC 60367-1 Cores for Inductors and Transformers forTelecommunications Part 1: Measuring Methods SecondEdition; Amendment 1-1984; Amendment 2-1992

IEC 60367-2 Cores for Inductors and Transformers forTelecommunications Part 2: Guides for the Draftingof Performance Specifications First Edition; Supplement A-1976; Amendment 1-1983

IEC 60368-1 Piezoelectric Filters Part 1: General Information, Standard Values and Test Conditions Third Edition

IEC 60368-2-1 Piezoelectric Filters Part 2: Guide to the Use ofPiezoelectric Filters Section One - Quartz CrystalFilters Second Edition

IEC 60368-2-2 Piezoelectric Filters - Part 2: Guide to the Use ofPiezoelectric Filters - Section 2: PiezoelectricCeramic Filters First Edition

IEC 60368-3 Piezoelectric Filters Part 3: Standard OutlinesSecond Edition

IEC 60369 Methods for Measuring Performance of FloorPolishers for Household and Similar Purposes FirstEdition

IEC 60370 Test Procedure for Thermal Endurance of InsulatingVarnishes - Electric Strength Method First Edition

IEC 60371-1 Specification for Insulating Materials Based onMica Part 1: Definitions and General RequirementsSecond Edition

IEC 60371-2 Specification for Insulating Materials Based onMica Part 2: Methods of Test Second Edition; Amendment 1-1994

IEC 60371-3-1 Specification for Insulating Materials Based onMica Part 3: Specifications for IndividualMaterials Sheet 1: Commutator Separators andMaterials Second Edition

IEC 60371-3-2 Specification for Insulating Materials Based onMica Part 3: Specifications for IndividualMaterials Sheet 2: Mica Paper First Edition

IEC 60371-3-3 Specification for Insulating Materials Based onMica Part 3: Specifications for IndividualMaterials Sheet 3: Specification for Rigid MicaMaterials for Heating Equipment First Edition

IEC 60371-3-4 Specification for Insulating Materials Based onMica Part 3: Specifications for IndividualMaterials Sheet 4: Polyester Film-Backed Mica Paper


with a B-Stage Epoxy Resin Binder First Edition IEC 60371-3-5 Specification for Insulating Materials Based on

Mica Part 3: Specifications for IndividualMaterials Sheet 5: Glass-Backed Mica Paper with anEpoxy Resin Binder for Post-Impregnation (VPI) First Edition

IEC 60371-3-6 Specification for Insulating Materials Based onMica Part 3: Specifications for IndividualMaterials Sheet 6: Glass-Backed Mica Paper with aB-Stage Epoxy Resin Binder First Edition

IEC 60371-3-7 Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 7: Polyester Film Mica Paper with an Epoxy ResinBinder for Single Conductor Taping First Edition; Corrigendum-1995; CENELEC EN 60 371-3-7: 1995

IEC 60371-3-8 Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 8: Mica Paper Tapes for Flame-Resistant SecurityCables First Edition; Corrigendum-1995

IEC 60371-3-9 Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 9: Moulding Micanite First Edition; Corrigendum-1995

IEC 60372 Locking Devices for Ball and Socket Couplings ofString Insulator Units: Dimensions and Tests ThirdEdition; Amendment 1-1991

IEC 60373 Mechanical Coupler for Measurements on BoneVibrators Second Edition

IEC 60374 Guide for Choosing Modular Dimensions for WaveguideComponents First Edition

IEC 60375 Conventions Concerning Electric and MagneticCircuits First Edition

IEC 60376 Specification and Acceptance of New SulphurHexafluoride First Edition; Supplement A-1973; Supplement B-1974

IEC 60377-1 Recommended Methods for the Determination of theDielectric Properties of Insulating Materials atFrequencies Above 300 MHz Part 1: General FirstEdition

IEC 60377-2 Methods for the Determination of the DielectricProperties of Insulating Materials at FrequenciesAbove 300 MHz Part 2: Resonance Methods FirstEdition

IEC 60379 Methods for Measuring the Performance of ElectricStorage Water-Heaters for Household Purposes ThirdEdition

IEC 60381-1 Analogue Signals for Process Control Systems Part1: Direct Current Signals Second Edition

IEC 60381-2 Analogue Signals for Process Control Systems Part2: Direct Voltage Signals First Edition

IEC 60382 Analogue Pneumatic Signal for Process ControlSystems Second Edition

IEC 60383-1 Insulators for Overhead Lines with a NominalVoltage Above 1 000 V Part 1: Ceramic or GlassInsulator Units for A.C. Systems - Definitions, Test Methods and Acceptance Criteria Fourth Edition

IEC 60383-2 Insulators for Overhead Lines with a NominalVoltage Above 1 000 V Part 2: Insulator Strings andInsulator Sets for A.C. Systems - Definitions, TestMethods and Acceptance Criteria First Edition

IEC 60384-1 Fixed Capacitors for Use in Electronic EquipmentPart 1: Generic Specification Second Edition; Amendment 2-1987, Incorporating Amendment 1; Amendment 3-1989; Amendment 4-1992; IECQ QC 300000

IEC 60384-2 Fixed Capacitors for Use in Electronic Equipment


Part 2: Blank Detail Specification: FixedMetallized Polyethylene-Terephthalate FilmDielectric D.C. Capacitors Assessment Level ESecond Edition; Amendment 1-1987; Amendment2-1992; IECQ QC 300400

IEC 60384-2-1 Fixed Capacitors for Use in Electronic EquipmentPart 2: Blank Detail Specification: FixedMetallized Polyethylene-Terephthalate FilmDielectric D.C. Capacitors Assessment Level E FirstEdition; Amendment 1-1987; IECQ QC 300401

IEC 60384-3 Fixed Capacitors for Use in Electronic EquipmentPart 3: Sectional Specification: Fixed TantalumChip Capacitors Second Edition; IECQ QC 300800

IEC 60384-3-1 Fixed Capacitors for Use in Electronic EquipmentPart 3: Blank Detail Specification: Fixed TantalumChip Capacitors, Assessment Level E First Edition; Corrigendum-05/1989; IECQ QC 300801

IEC 60384-3-101 Fixed Capacitors for Use in Electronic EquipmentPart 3-101: Detail Specification: Fixed TantalumChip Capacitors for Surface Mounting with SolidElectrolyte and Porous Anode, Style L, AssessmentLevel E First Edition

IEC 60384-4 Fixed Capacitors for Use in Electronic EquipmentPart 4: Sectional Specification: AluminiumElectrolytic Capacitors with Solid and Non-SolidElectrolyte Second Edition; Amendment 1-1992; IECQQC 300300; Amendment 2-1996

IEC 60384-4-1 Fixed Capacitors for Use in Electronic EquipmentPart 4: Blank Detail Specification: AluminiumElectrolytic Capacitors with Non-Solid ElectrolyteAssessment Level E First Edition; Amendment1-1992; IECQ QC 300301; Amendment 2-1996

IEC 60384-4-2 Fixed Capacitors for Use in Electronic EquipmentPart 4: Blank Detail Specification: AluminiumElectrolytic Capacitors with Solid ElectrolyteAssessment Level E First Edition; Amendment1-1992; Amendment 2-1996; IECQ QC 300302

IEC 60384-5 Fixed Capacitors for Use in Electronic EquipmentPart 5: Sectional Specification: Fixed MicaDielectric D.C. Capacitors with a Rated Voltage NotExceeding 3 000 V - Selection of Methods of Testand General Requirements Second Edition

IEC 60384-5-1 Fixed Capacitors for Use in Electronic EquipmentPart 5: Blank Detail Specification: Fixed MicaDielectric D.C. Capacitors with a Rated Voltage NotExceeding 3 000 V - Assessment Level E FirstEdition; IECQ QC 301001

IEC 60384-6 Fixed Capacitors for Use in Electronic EquipmentPart 6: Sectional Specification: Fixed MetallizedPolycarbonate Film Dielectric D.C. CapacitorsSecond Edition; Amendment 1-1992; IECQ QC 300500

IEC 60384-6-1 Fixed Capacitors for Use in Electronic EquipmentPart 6: Blank Detail Specification: FixedMetallized Polycarbonate Film Dielectric D.C. Capacitors Assessment Level E First Edition; IECQQC 300501

IEC 60384-7 Fixed Capacitors for Use in Electronic EquipmentPart 7: Sectional Specification: Fixed PolystyreneFilm Dielectric Metal Foil D.C. Capacitors SecondEdition; IECQ QC 300900

IEC 60384-7-1 Fixed Capacitors for Use in Electronic EquipmentPart 7: Blank Detail Specification for FixedPolystyrene Film Dielectric Metal Foil D.C. Capacitors, Assessment Level E First Edition; IECQQC 300901


IEC 60384-8 Fixed Capacitors for Use in Electronic EquipmentPart 8: Sectional Specification: Fixed Capacitorsof Ceramic Dielectric Second Edition; Amendment1-1993; IECQ QC 300600

IEC 60384-8-1 Fixed Capacitors for Use in Electronic EquipmentPart 8: Blank Detail Specification: FixedCapacitors of Ceramic Dielectric Class 1 AssessmentLevel E First Edition; Amendment 1-1993; IECQ QC300601

IEC 60384-9 Fixed Capacitors for Use in Electronic EquipmentPart 9: Sectional Specification: Fixed Capacitorsof Ceramic Dielectric, Class 2 Second Edition; IECQQC 300700

IEC 60384-9-1 Fixed Capacitors for Use in Electronic EquipmentPart 9: Blank Detail Specification: FixedCapacitors of Ceramic Dielectric, Class 2Assessment Level E First Edition; IECQ QC 300701

IEC 60384-10 Fixed Capacitors for Use in Electronic EquipmentPart 10: Sectional Specification: Fixed MultilayerCeramic Chips Capacitors Second Edition; Amendment1-1993; IECQ QC 301900

IEC 60384-10-1 Fixed Capacitors for Use in Electronic EquipmentPart 10: Blank Detail Specification: FixedMultilayer Ceramic Chips Capacitors AssessmentLevel E First Edition; Amendment 1-1993; IECQ QC301901

IEC 60384-11 Fixed Capacitors for Use in Electronic EquipmentPart 11: Sectional Specification: FixedPolyethylene-Terephthalate Film Dielectric MetalFoil D.C. Capacitors Second Edition; IECQ QC 300100

IEC 60384-11-1 Fixed Capacitors for Use in Electronic EquipmentPart 11: Blank Detail Specification: FixedPolyethylene-Terephthalate Film Dielectric MetalFoil D.C. Capacitors Assessment Level E FirstEdition; IECQ QC 300101

IEC 60384-12 Fixed Capacitors for Use in Electronic EquipmentPart 12: Sectional Specification: FixedPolycarbonate Film Dielectric Metal Foil D.C. Capacitors Second Edition; IECQ QC 301700

IEC 60384-12-1 Fixed Capacitors for Use in Electronic EquipmentPart 12: Blank Detail Specification: FixedPolycarbonate Film Dielectric Metal Foil D.C. Capacitors Assessment Level E First Edition; IECQQC 301701

IEC 60384-13 Fixed Capacitors for Use in Electronic EquipmentPart 13: Sectional Specification: FixedPolypropylene Film Dielectric Metal Foil D.C. Capacitors Second Edition; IECQ QC 301800

IEC 60384-13-1 Fixed Capacitors for Use in Electronic EquipmentPart 13: Blank Detail Specification: FixedPolypropylene Film Dielectric Metal Foil D.C. Capacitors Assessment Level E First Edition; IECQQC 301801

IEC 60384-14 Fixed Capacitors for Use in Electronic EquipmentPart 14: Sectional Specification: Fixed Capacitorsfor Electromagnetic Interference Suppression andConnection to the Supply Mains Second Edition; IECQQC 302400; Amendment 1-1995; CAN/CSA-IEC E384-14-95

IEC 60384-14-1 Fixed Capacitors for Use in Electronic EquipmentPart 14: Blank Detail Specification: FixedCapacitors for Electromagnetic InterferenceSuppression and Connection to the Supply MainsAssessment Level D First Edition; IECQ QC 302401; CAN/CSA-IEC E384-14-1-95

IEC 60384-15 Fixed Capacitors for Use in Electronic Equipment


Part 15: Sectional Specification: Fixed TantalumCapacitors with Non-Solid or Solid ElectrolyteFirst Edition; Amendment 1-1987; Amendment 2-1992; IECQ QC 300200

IEC 60384-15-1 Fixed Capacitors for Use in Electronic EquipmentPart 15: Blank Detail Specification: Fixed TantalumCapacitors with Non-Solid Electrolyte and FoilElectrode Assessment Level E First Edition; IECQ QC300203

IEC 60384-15-2 Fixed Capacitors for Use in Electronic EquipmentPart 15: Blank Detail Specification: Fixed TantalumCapacitors with Non-Solid Electrolyte and PorousAnode Assessment Level E First Edition; IECQ QC300202

IEC 60384-15-3 Fixed Capacitors for Use in Electronic EquipmentPart 15: Blank Detail Specification: Fixed TantalumCapacitors with Solid and Porous Anode AssessmentLevel E First Edition; Amendment 1-1992; IECQ QC300201

IEC 60384-16 Fixed Capacitors for Use in Electronic EquipmentPart 16: Sectional Specification: Fixed MetallizedPolypropylene Film Dielectric D.C. Capacitors FirstEdition; Amendment 1-1987; Amendment 2-1992; IECQQC 301200

IEC 60384-16-1 Fixed Capacitors for Use in Electronic EquipmentPart 16: Blank Detail Specification: FixedMetallized Polypropylene Film Dielectric D.C. Capacitors Assessment Level E First Edition; Amendment 1-1987; IECQ QC 301201

IEC 60384-17 Fixed Capacitors for Use in Electronic EquipmentPart 17: Sectional Specification: Fixed MetallizedPolypropylene Film Dielectric A.C. and PulseCapacitors First Edition; IECQ QC 301300

IEC 60384-17-1 Fixed Capacitors for Use in Electronic EquipmentPart 17: Blank Detail Specification: FixedMetallized Polypropylene Film Dielectric A.C. andPulse Capacitors Assessment Level E First Edition; IECQ QC 301301

IEC 60384-18 Fixed Capacitors for Use in Electronic EquipmentPart 18: Sectional Specification: Fixed AluminiumElectrolytic Chip Capacitors with Solid and Non-Solid Electrolyte First Edition; IECQ QC 302300; Amendment 1-1998

IEC 60384-18-1 Fixed Capacitors for Use in Electronic EquipmentPart 18: Blank Detail Specification: FixedAluminium Electrolytic Chip Capacitors with SolidElectrolyte Assessment Level E First Edition; IECQQC 302301; Amendment 1 03 1998

IEC 60384-18-2 Fixed Capacitors for Use in Electronic EquipmentPart 18: Blank Detail Specification: FixedAluminium Electrolytic Chip Capacitors with Non-Solid Electrolyte Assessment Level E FirstEdition; IECQ QC 302302

IEC 60384-19 Fixed Capacitors for Use in Electronic EquipmentPart 19: Sectional Specification: Fixed MetallizedPolyethylene-Terephthalate Film Dielectric ChipD.C. Capacitors First Edition; IECQ QC 302200

IEC 60384-19-1 Fixed Capacitors for Use in Electronic EquipmentPart 19: Blank Detail Specification: FixedMetallized Polyethylene-Terephthalate FilmDielectric Chip D.C. Capacitors Assessment Level EFirst Edition; IECQ QC 302201

IEC 60384-20 Fixed Capacitors for Use in Electronic Equipment - Part 20: Sectional Specification: FixedMetallized Polyphenylene Sulfide Film Dielectric


Chip D.C. Capacitors First Edition; IECQ QC 302000 IEC 60384-20-1 Fixed Capacitors for Use in Electronic Equipment

- Part 20: Blank Detail Specification: FixedMetallized Polyphenylene Sulfide Film DielectricChip D.C. Capacitors Assessment Level EZ FirstEdition; IECQ QC 302001

IEC 60386 Method of Measurement of Speed Fluctuations inSound Recording and Reproducing Equipment FirstEdition; Amendment 1-1988

IEC 60387 Symbols for Alternating-Current Electricity MetersSecond Edition

IEC 60388-1 Thermal Time Delay Switches for Use in Equipmentfor Telecommunication and in ElectronicApplications Employing Similar Techniques Part 1: General Requirements and Measuring Methods FirstEdition

IEC 60389-1 Thermostatic Switches Primarily for Use inEquipment for Telecommunications and in ElectronicApplications Employing Similar Techniques Part 1: General Requirements and Measuring Methods FirstEdition; Amendment 1-1976

IEC 60390 Dimensions of Spindle Ends for Manually OperatedElectronic Components First Edition; SupplementA-1976; Amendment 1-1976

IEC 60391 Marking of Insulated Conductors First Edition IEC 60392 Guide for the Drafting of Specifications for

Microwave Ferrites First Edition IEC 60393-1 Potentiometers for Use in Electronic Equipment Part

1: Generic Specification Second Edition; Amendment1-1992

IEC 60393-2 Potentiometers for Use in Electronic Equipment Part2: Sectional Specification Lead-Screw Actuated andRotary Preset Potentiometers Second Edition; IECQQC 410100

IEC 60393-2-1 Potentiometers for Use in Electronic Equipment Part2: Blank Detail Specification: Lead-Screw Actuatedand Rotary Preset Potentiometers Assessment Level EFirst Edition; IECQ QC 410101

IEC 60393-2-2 Potentiometers for Use in Electronic Equipment Part2: Blank Detail Specification: Lead-Screw Actuatedand Rotary Preset Potentiometers Assessment Level FFirst Edition; IECQ QC 410102

IEC 60393-2-101 Potentiometers for Use in Electronic Equipment - Part 2: Detail Specification: Lead-Screw ActuatedPreset Potentiometers - Stability Class 5% - Assessment Level E First Edition; IECQ QC410101XX0001

IEC 60393-3 Potentiometers for Use in Electronic Equipment Part3: Sectional Specification: Rotary PrecisionPotentiometers Second Edition; IECQ QC 410400

IEC 60393-3-1 Potentiometers for Use in Electronic Equipment Part3: Blank Detail Specification: Rotary PrecisionPotentiometers Assessment Level E First Edition; IECQ QC 410402

IEC 60393-4 Potentiometers for Use in Electronic Equipment Part4: Sectional Specification: Single-Turn RotaryPower Potentiometers Second Edition; IECQ QC 410200

IEC 60393-4-1 Potentiometers for Use in Electronic Equipment Part4: Blank Detail Specification: Single-Turn RotaryPower Potentiometers Assessment Level E FirstEdition; IECQ QC 410203

IEC 60393-4-2 Potentiometers for Use in Electronic Equipment Part4: Blank Detail Specification: Single-Turn RotaryPower Potentiometers Assessment Level F First


Edition; IECQ QC 410204 IEC 60393-5 Potentiometers for Use in Electronic Equipment Part

5: Sectional Specification: Single-Turn Rotary Low-Power Wirewound and Non-Wirewound PotentiometersSecond Edition; IECQ QC 410300

IEC 60393-5-1 Potentiometers for Use in Electronic Equipment Part5: Blank Detail Specification: Single-Turn RotaryLow-Power Potentiometers Assessment Level E FirstEdition; IECQ QC 410301

IEC 60393-5-2 Potentiometers for Use in Electronic Equipment Part5: Blank Detail Specification: Single-Turn RotaryLow-Power Potentiometers Assessment Level F FirstEdition; IECQ QC 410302

IEC 60394-1 Varnished Fabrics for Electrical Purposes Part 1: Definitions and General Requirements First Edition

IEC 60394-2 Varnished Fabrics for Electrical Purposes Part 2: Methods of Test First Edition

IEC 60394-3-1 Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Oleoresinous Varnish-Cotton Base, OR/C FirstEdition

IEC 60394-3-2 Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Glass-Fabric Based Varnished Fabrics with Epoxy, Polyurethane, Silicone, Polyester, Bituminous orOleoresinous Varnish First Edition

IEC 60396 Test Methods for Induction Channel Furnaces SecondEdition

IEC 60397 Test Methods for Batch Furnaces with MetallicHeating Resistors Second Edition

IEC 60398 General Test Conditions for Industrial Electro-Heating Equipment First Edition

IEC 60399 Standard Sheets for Barrel Thread for E14 and E27Lampholders with Shade Holder Ring First Edition; Amendment 1 08 1997

IEC 60400 Lampholders for Tubular Fluorescent Lamps andStarterholders Fifth Edition; Amendment 1-1997; Amendment 2-1997

IEC 60401 Ferrite Materials - Guide on the Format of DataAppearing in Manufacturers' Catalogues ofTransformer and Inductor Cores Second Edition

IEC 60402 Simplified Method for Pressure Calibration of One-Inch Condenser Microphones by the ReciprocityTechnique First Edition; Withdrawn

IEC 60404-1 Magnetic Materials Part 1: Classification FirstEdition

IEC 60404-2 Magnetic Materials Part 2: Methods of Measurementof Magnetic Properties of Electrical Steel Sheetand Strip by Means of an Epstein Frame ThirdEdition

IEC 60404-3 Magnetic Materials Part 3: Methods of Measurementof the Magnetic Properties of Magnetic Sheet andStrip by Means of a Single Sheet Tester SecondEdition

IEC 60404-4 Magnetic Materials - Part 4: Methods of Measurementof D.C. Magnetic Properties of Iron and SteelSecond Edition

IEC 60404-5 Magnetic Materials - Part 5: Permanent Magnet (Magnetically Hard) Materials - Methods ofMeasurement of Magnetic Properties Second Edition

IEC 60404-6 Magnetic Materials Part 6: Methods of Measurementof the Magnetic Properties of Isotropic Nickel-IronSoft Magnetic Alloys, Types E1, E3 and E4 FirstEdition


IEC 60404-7 Magnetic Materials Part 7: Method of Measurement ofthe Coercivity of Magnetic Materials in an OpenMagnetic Circuit First Edition

IEC 60404-8-1 Magnetic Materials Part 8: Specifications forIndividual Materials Section 1 - StandardSpecifications for Magnetically Hard MaterialsFirst Edition; Amendment 2-1992, IncludingAmendment 1

IEC 60404-8-2 Magnetic Materials - Part 8-2: Specifications forIndividual Materials - Cold-Rolled ElectricalAlloyed Steel Sheet and Strip Delivered in theSemi-Processed State Second Edition

IEC 60404-8-3 Magnetic Materials - Part 8-3: Specifications forIndividual Materials - Cold-Rolled Electrical Non-Alloyed Steel Sheet and Strip Delivered in theSemi-Processed State Second Edition

IEC 60404-8-4 Magnetic Materials - Part 8-4: Specifications forIndividual Materials - Cold-Rolled Non-OrientedElectrical Steel Sheet and Strip Delivered in theFully-Processed State Second Edition

IEC 60404-8-5 Magnetic Materials Part 8: Specifications forIndividual Materials Section Five - Specificationfor Steel Sheet and Strip with Specified MechanicalProperties and Magnetic Permeability First Edition

IEC 60404-8-6 Magnetic Materials Part 8: Specifications forIndividual Materials Section Six - Soft MagneticMetallic Materials First Edition; Corrigendum-03/1987; Amendment 1-1992

IEC 60404-8-7 Magnetic Materials - Part 8-7: Specifications forIndividual Materials - Cold-Rolled Grain-OrientedElectrical Steel Sheet and Strip Delivered in theFully-Processed State Second Edition

IEC 60404-8-8 Magnetic Materials Part 8: Specifications forIndividual Materials Section 8 - Specification forThin Magnetic Steel Strip for Use at MediumFrequencies First Edition

IEC 60404-8-9 Magnetic Materials Part 8: Specification forIndividual Materials Section 9: StandardSpecification for Sintered Soft Magnetic MaterialsFirst Edition

IEC 60404-8-10 Magnetic Materials - Part 8: Specifications forIndividual Materials - Section 10: Specificationfor Magnetic Materials (Iron and Steel) for Use inRelays First Edition

IEC 60404-9 Magnetic Materials Part 9: Methods of Determinationof the Geometrical Characteristics of MagneticSteel Sheet and Strip First Edition

IEC 60404-10 Magnetic Materials Part 10: Methods of Measurementof Magnetic Properties of Magnetic Steel Sheet andStrip at Medium Frequencies First Edition

IEC 60404-11 Magnetic Materials Part 11: Method of Test for theDetermination of Surface Insulation Resistance ofMagnetic Sheet and Strip First Edition

IEC 60404-12 Magnetic Materials Part 12: Guide to Methods ofAssessment of Temperature Capability ofInterlaminar Insulation Coatings First Edition

IEC 60404-13 Magnetic Materials - Part 13: Methods ofMeasurement of Density, Resistivity and StackingFactor of Electrical Steel Sheet and Strip FirstEdition

IEC 60405 Nuclear Instruments: Constructional Requirements toAfford Personal Protection Against IonizingRadiation First Edition

IEC 60406 Cassettes for Medical X-Ray Diagnosis


- Radiographic Cassettes and Mammographic CassettesThird Edition

IEC 60407 Radiation Protection in Medical X-Ray Equipment 10kV to 400 kV Sub-Clause 7.5.5: Equipment for DentalRadiology First Edition; Supplement A-1975

IEC 60409 Guide for the Inclusion of Reliability Clauses intoSpecifications for Components (or Parts) forElectronic Equipment Second Edition

IEC 60410 Sampling Plans and Procedures for Inspection byAttributes First Edition; Corrigenda-1976

IEC 60411-2 Power Convertors for Electric Traction Part 2: Additional Technical Information First Edition

IEC 60412 Standard Dimensions of Scintillators First Edition IEC 60413 Test Procedures for Determining Physical Properties

of Brush Materials for Electrical Machines FirstEdition

IEC 60414 Safety Requirements for Indicating and RecordingElectrical Measuring Instruments and TheirAccessories First Edition

IEC 60415-1 Plastic Film Dielectric Rotary Variable TuningCapacitors: Grade 2 Part 1: General Requirementsfor Tests and Measuring Methods First Edition

IEC 60416 General Principles for the Creation of GraphicalSymbols for Use on Equipment Second Edition

IEC 60417 Graphical Symbols for Use on Equipment FirstEdition; Amended in Accordance with Supplements: A-1974, B-1975, C-1977, D-1978, E-1980, F-1982, G-1985, H-1987, J-1990, K-1991 and L-1993; Supplement M-1994; Supplement N-1995; SupplementO-1996; Supplement P-03 1997

IEC 60418-1 Variable Capacitors Part 1: Terms and Methods ofTest First Edition; Amendment 1-1976; Amendment2-1981

IEC 60418-2 Variable Capacitors Part 2: Type Specification forVariable Tuning Capacitors Type A First Edition; Supplement A-1980; Supplement B-1980; Amendment1-1981

IEC 60418-3 Variable Capacitors Part 3: Type Specification forVariable Trimmer Capacitors Type B Blank DetailSpecification First Edition; Supplement A-1980

IEC 60418-4 Variable Capacitors Part 4: Type Specification forVariable Pre-Set Capacitors Type C Blank DetailSpecification First Edition; Supplement A-1980

IEC 60419 Guide for the Inclusion of Lot-By-Lot and PeriodicInspection Procedures in Specifications forElectronic Components (or Parts) First Edition

IEC 60420 High-Voltage Alternating Current Switch-FuseCombinations Second Edition

IEC 60422 Supervision and Maintenance Guide for MineralInsulating Oils in Electrical Equipment SecondEdition

IEC 60423 Conduits for Electrical Purposes - OutsideDiameters of Conduits for Electrical Installationsand Threads for Conduits and Fittings SecondEdition

IEC 60424 Guide to the Specification of Limits for PhysicalImperfections of Parts Made from Magnetic OxidesFirst Edition

IEC 60424-2 Guidance on the Limits of Surface Irregularities ofFerrite Cores - Part 2: RM-Cores First Edition

IEC 60425 Guide for the Choice of Colours to Be Used for theMarking of Capacitors and Resistors First Edition

IEC 60426 Test Methods for Determining Electrolytic Corrosionwith Insulating Materials First Edition


IEC 60427 Synthetic Testing of High-Voltage AlternatingCurrent Circuit-Breakers Second Edition; Amendment1-1992; Amendment 2-1995; CENELEC EN 60427: 1992, Includes Amendment A1: 1993, Amendment A2: 1995

IEC 60428 Standard Cells First Edition; CENELEC HD 612 S1: 1992

IEC 60431 Dimensions of Square Cores (RM-Cores) Made ofMagnetic Oxides and Associated Parts SecondEdition; Amendment 1-1995; Amendment 2-1996

IEC 60432-1 Safety Specifications for Incandescent Lamps; Part1: Tungsten Filament Lamps for Domestic and SimilarGeneral Lighting Purposes First Edition; Amendment1-1995; I-SH 09/1996; Amendment 2-1997

IEC 60432-2 Safety Specifications for Incandescent Lamps - Part2: Tungsten Halogen Lamps for Domestic and SimilarGeneral Lighting Purposes First Edition; Amendment1-1996; Amendment 2-1997

IEC 60433 Characteristics of String Insulator Units of theLong Rod Type Second Edition

IEC 60434 Aircraft Electrical Filament Lamps First Edition; Amendment 1-1981; Amendment 2-1984

IEC 60436 Methods for Measuring the Performance of ElectricDishwashers Second Edition; Corrigendum-1982; Amendment 1-1984; Amendment 2-1992; Amendment3-1994; Corrigendum-1998

IEC 60437 Radio Interference Test on High-Voltage InsulatorsSecond Edition

IEC 60438 Tests and Dimensions for High-Voltage D.C. Insulators First Edition

IEC 60439-1 Low-Voltage Switchgear and Controlgear AssembliesPart 1: Type-Tested and Partially Type-TestedAssemblies Third Edition; Corrigendum-1993; Amendment 1-1995; Amendment 2-1996

IEC 60439-2 Low-Voltage Switchgear and Controlgear AssembliesPart 2: Particular Requirements for Busbar TrunkingSystems (Busways) Second Edition; Amendment 1-1991

IEC 60439-3 Low-Voltage Switchgear and Controlgear AssembliesPart 3: Particular Requirements for Low-VoltageSwitchgear and Controlgear Assemblies Intended toBe Installed in Places Where Unskilled Persons HaveAccess for Their Use - Distribution Boards FirstEdition; Amendment 1-1993

IEC 60439-4 Low-Voltage Switchgear and Controlgear AssembliesPart 4: Particular Requirements for Assemblies forConstruction Sites (ACS) First Edition; Amendment1-1995

IEC 60439-5 Low-Voltage Switchgear and Controlgear Assemblies - Part 5: Particular Requirements for AssembliesIntended to Be Installed Outdoors in Public Places - Cable Distribution Cabinets (CDCs) for PowerDistribution in Networks First Edition

IEC 60440 Method of Measurement of Non-Linearity in ResistorsFirst Edition; Corrigendum-09/1974

IEC 60441 Photometric and Colorimetric Methods of Measurementof the Light Emitted by a Cathode-Ray Tube ScreenFirst Edition

IEC 60442 Methods for Measuring Performance of ElectricToasters for Household and Similar Purposes FirstEdition; Amendment 1-1992

IEC 60443 Stabilized Supply Apparatus for Measurement FirstEdition

IEC 60444-1 Measurement of Quartz Crystal Unit Parameters byZero Phase Technique in a PI-Network Part 1: BasicMethod for the Measurement of Resonance Frequency


and Resonance Resistance of Quartz Crystal Units byZero Phase Technique in a PI-Network Second Edition

IEC 60444-2 Measurement of Quartz Crystal Unit Parameters byZero Phase Technique in a PI-Network Part 2: PhaseOffset Method for Measurement of MotionalCapacitance of Quartz Crystal Units First Edition

IEC 60444-3 Measurement of Quartz Crystal Unit Parameters byZero Phase Technique in a PI-Network Part 3: BasicMethod for the Measurement of Two-TerminalParameters of Quartz Cyrstal Units up to 200 MHz byPhase Technique in a PI-Network with Compensationof the Parallel Capacitance Co First Edition

IEC 60444-4 Measurement of Quartz Crystal Unit Parameters byZero Phase Technique in a PI-Network Part 4: Methodfor the Measurement of the Load Resonance FrequencyFL, Load Resonance Resistance RL and theCalculation of Other Derived Values of QuartzCrystal Units, up to 30 MHz First Edition

IEC 60444-5 Measurement of Quartz Crystal Unit Parameters - Part 5: Methods for the Determination ofEquivalent Electrical Parameters Using AutomaticNetwork Analyzer Techniques and Error CorrectionFirst Edition

IEC 60444-6 Measurement of Quartz Crystal Unit Parameters - Part 6: Measurement of Drive Level Dependence (DLD) First Edition

IEC 60445 Identification of Equipment Terminals and ofTerminations of Certain Designated Conductors, Including General Rules for an Alphanumeric SystemSecond Edition

IEC 60446 Identification of Conductors by Colours or NumeralsSecond Edition

IEC 60447 Man-Machine Interface (MMI) - Actuating PrinciplesSecond Edition

IEC 60449 Voltage Bands for Electrical Installations ofBuildings First Edition; Amendment 1-1979

IEC 60450 Measurement of the Average Viscometric Degree ofPolymerization of New and Aged Electrical PapersFirst Edition

IEC 60451 Maximum Case Dimensions for Capacitors andResistors First Edition

IEC 60454-1 Specifications for Pressure-Sensitive AdhesiveTapes for Electrical Purposes Part 1: GeneralRequirements Second Edition

IEC 60454-2 Specification for Pressure-Sensitive Adhesive Tapesfor Electrical Purposes Part 2: Methods of TestSecond Edition

IEC 60454-3-1 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 1: PVC Film Tapes with Pressure-Sensitive Adhesive Second Edition

IEC 60454-3-2 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 2: Polyester Film Tapes withRubber Thermosetting or Acrylic CrosslinkedAdhesives Second Edition

IEC 60454-3-3 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 3: Polyester Film Tapes withRubber Thermoplastic Adhesive Second Edition

IEC 60454-3-4 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials Sheet 4: Cellulosic Paper, Creped, withRubber Thermosetting Adhesive Second Edition


IEC 60454-3-5 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 5: Cellulosic Paper, Non-Creped, with Rubber Thermosetting Adhesive Second Edition

IEC 60454-3-6 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 6: Polycarbonate Film Tapes withAcrylic Thermoplastic Adhesive Second Edition

IEC 60454-3-7 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 7: Polyimide Film Tapes withPressure-Sensitive Adhesive Second Edition

IEC 60454-3-8 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 8: Glass Fabric with Pressure-Sensitive Adhesive Second Edition

IEC 60454-3-9 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 9: Cellulose Acetate Woven FabricTapes with Rubber Thermosetting Adhesives FirstEdition

IEC 60454-3-10 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 10: Requirements for Cellulose-Acetate-Butyrate Film Tapes with RubberThermosetting Adhesive First Edition

IEC 60454-3-11 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 11: Combination Tapes Made ofCreped Cellulosic Paper and PolyethyleneTerephthalate Film with Rubber ThermosettingAdhesive First Edition

IEC 60454-3-12 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 12: Polyethylene Film Tapes withPressure-Sesitive Adhesive First Edition

IEC 60454-3-13 Pressure-Sensitive Adhesive Tapes for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 13: Requirements for CombinedCellulose-Viscose Woven Fabric Tapes, One SideCovered with a Thermoplastic Material, the OtherSide with Rubber Thermosetting Adhesive FirstEdition

IEC 60455-1 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 1: Definitions and General Requirements FirstEdition; Supplement A-1980

IEC 60455-2 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 2: Methods of Test First Edition; Amendment1-1982

IEC 60455-2-2 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 2: Methods of Test Test Methods for CoatingPowders for Electrical Purposes First Edition

IEC 60455-3-1 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 3: Specifications for Individual MaterialsSheet 1: Unfilled Epoxy Resinous Compounds FirstEdition

IEC 60455-3-2 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 3: Specifications for Individual MaterialsSheet 2: Quartz Filled Epoxy Resinous CompoundsFirst Edition; Amendment 1-1994


IEC 60455-3-3 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 3: Specifications for Individual MaterialsSheet 3: Unfilled Polyurethane Compounds FirstEdition

IEC 60455-3-4 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 3: Specifications for Individual MaterialsSheet 4: Filled Polyurethane Compounds FirstEdition

IEC 60455-3-5 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 3: Specifications for Individual MaterialsSheet 5: Unsaturated Polyester Impregnating ResinsFirst Edition

IEC 60455-3-11 Specification for Solventless PolymerisableResinous Compounds Used for Electrical InsulationPart 3: Specifications for Individual MaterialsSheet 11: Epoxy Resin-Based Coating Powders FirstEdition

IEC 60456 Clothes Washing Machines for Household Use - Methods for Measuring the Performance ThirdEdition

IEC 60457-1 Rigid Precision Coaxial Lines and Their AssociatedPrecision Connectors Part 1: General Requirementsand Measuring Methods First Edition

IEC 60457-2 Rigid Precision Coaxial Lines and Their AssociatedPrecision Connectors Part 2: 50 Ohm 7 mm RigidPrecision Coaxial Line and AssociatedHermaphroditic Precision Coaxial Connector FirstEdition

IEC 60457-3 Rigid Precision Coaxial Lines and Their AssociatedPrecision Connectors Part 3: 14 mm Rigid PrecisionCoaxial Line and Associated HermaphroditicPrecision Coaxial Connector - CharacteristicImpedances 50 Ohms and 75 Ohms Second Edition

IEC 60457-4 Rigid Precision Coaxial Lines and Their AssociatedPrecision Connectors Part 4: 21 mm Rigid PrecisionCoaxial Line and Associated HermaphroditicPrecision Coaxial Connector CharacteristicImpedance 50 Ohms (Type 9/21) - CharacteristicImpedance 75 Ohms (Type 6/21) Second Edition

IEC 60457-5 Rigid Precision Coaxial Lines and Their AssociatedPrecision Connectors Part 5: 50 Ohms 3.5 mm RigidPrecision Coaxial Line with Provision for MountingConnectors First Edition

IEC 60459 Ballasts for Low Pressure Sodium Vapour Lamps FirstEdition; Amendment 1-1976; Amendment 2-1978; Amendment 3-1980

IEC 60461 Time and Control Code for Video Tape RecordersSecond Edition

IEC 60462 Standard Test Procedures for Photomultiplier Tubesfor Scintillation Counting First Edition

IEC 60464-1 Specification for Insulating Varnishes ContainingSolvent Part 1: Definitions and GeneralRequirements First Edition

IEC 60464-2 Specification for Insulating Varnishes ContainingSolvent Part 2: Test Methods First Edition

IEC 60464-3-1 Specification for Insulating Varnishes ContainingSolvent Part 3: Specifications for IndividualMaterials Sheet 1: Requirements for Cold CuringFinishing Varnishes First Edition

IEC 60464-3-2 Specification for Insulating Varnishes ContainingSolvent Part 3: Specifications for Individual


Materials Sheet 2: Requirements for Hot CuringImpregnating Varnishes First Edition

IEC 60465 Specification for Unused Insulating Mineral Oilsfor Cables with Oil Ducts Second Edition

IEC 60466 A.C. Insulation-Enclosed Switchgear and Controlgearfor Rated Voltages Above 1 kV and up to andIncluding 38 kV Second Edition; Amendment 1-1994

IEC 60468 Method of Measurement of Resistivity of MetallicMaterials First Edition

IEC 60469-1 Pulse Techniques and Apparatus Part 1: Pulse Termsand Definitions Second Edition

IEC 60469-2 Pulse Techniques and Apparatus Part 2: PulseMeasurement and Analysis, General ConsiderationsSecond Edition

IEC 60470 High-Voltage Alternating Current Contactors FirstEdition; Amendment 1-1975

IEC 60471 Dimensions of Clevis and Tongue Couplings of StringInsulator Units Second Edition; Amendment 1-1980

IEC 60472-1 Solid Dielectric Tubular-Style Rotary Variable Pre-Set Capacitors: Grade 2 Part 1: GeneralRequirements for Tests and Measuring Methods FirstEdition

IEC 60473 Dimensions for Panel Mounted Indicating andRecording Electrical Measuring Instruments FirstEdition; Amendment 1-1979

IEC 60475 Method of Sampling Liquid Dielectrics First Edition IEC 60476 Nuclear Instrumentation - Electrical Measuring

Systems and Instruments Utilizing IonizingRadiation Sources - General Aspects Second Edition

IEC 60477 Laboratory d.c. Resistors First Edition; Amendment1-1997

IEC 60477-2 Laboratory Resistors Part 2: Laboratory a.c. Resistors First Edition; Amendment 1-1997

IEC 60478-1 Stabilized Power Supplies, D.C. Output Part 1: Terms and Definitions First Edition

IEC 60478-2 Stabilized Power Supplies, D.C. Output Part 2: Rating and Performance Second Edition

IEC 60478-3 Stabilized Power Supplies, D.C. Output Part 3: Reference Levels and Measurement of ConductedElectromagnetic Interference (EMI) Second Edition

IEC 60478-4 Stabilized Power Supplies, D.C. Output Part 4: Tests Other Than Radio-Frequency Interference FirstEdition

IEC 60478-5 Stabilized Power Supplies, D.C. Output Part 5: Measurement of the Magnetic Component of theReactive Near Field First Edition

IEC 60479-1 Effects of Current on Human Beings and Livestock - Part 1: General Aspects Third Edition

IEC 60479-2 Effects of Current Passing Through the Human BodyPart 2: Special Aspects Chapter 4: Effects ofAlternating Current with Frequencies Above 100 HzChapter 5: Effects of Special Waveforms of CurrentChapter 6: Effects of Unidirectional Single ImpulseCurrents of Short Duration Second Edition

IEC 60480 Guide to the Checking of Sulphur Hexafluoride (SF6) Taken from Electrical Equipment First Edition

IEC 60481 Coupling Devices for Power Line Carrier SystemsFirst Edition

IEC 60482 Dimensions of Electronic Instrument Modules (forNuclear Electronic Instruments) First Edition

IEC 60483 Guide to Dynamic Measurements of PiezoelectricCeramics with High Electromechanical Coupling FirstEdition

IEC 60485 Digital Electronic D.C. Voltmeters and D.C.


Electronic Analogue-to-Digital Convertors FirstEdition

IEC 60486 Precision Method for Free-Field Calibration of One-Inch Standard Condenser Microphones by theReciprocity Technique First Edition; Replaced by1094-3: 1995; Withdrawn

IEC 60487-1 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 1: Measurements Common to Sub-Systems and SimulatedRadio-Relay Systems Second Edition

IEC 60487-2-1 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section One - GeneralFirst Edition

IEC 60487-2-2 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section Two - Stand-ByChannel Switching Equipment First Edition

IEC 60487-2-3 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section Three - R.F. Branching Networks First Edition

IEC 60487-2-4 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section Four - Frequency Modulators First Edition

IEC 60487-2-5 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section Five - Frequency Demodulators First Edition

IEC 60487-2-6 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section Six - Diversity, Twin-Path and Hot Stand-By EquipmentFirst Edition

IEC 60487-2-7 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section Seven - RadioTransmitters First Edition

IEC 60487-2-8 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 2: Measurements for Sub-Systems Section Eight - RadioReceivers First Edition

IEC 60487-3 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 3: SimulatedSystems First Edition

IEC 60487-3-2 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 3: SimulatedSystems Section Two - Measurements in the BasebandFirst Edition

IEC 60487-3-3 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 3: SimulatedSystems Section Three - Measurements for Monochromeand Colour Television Transmission First Edition

IEC 60487-3-4 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 3: SimulatedSystems Section Four - Measurements for F.D.M. Transmission First Edition

IEC 60487-3-5 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 3: SimulatedSystems Section Five - Measurement of MutualInterference First Edition

IEC 60487-3-6 Methods of Measurement for Equipment Used inTerrestrial Radio-Relay Systems Part 3: SimulatedSystems Section Six - Measurements for Sound-


Programme Transmission First Edition IEC 60488 Dimensions of Copper Conductors in Local Cables

First Edition IEC 60489-1 Methods of Measurement for Radio Equipment Used in

the Mobile Services - Part 1: General Definitionsand Standard Conditions of Measurement SecondEdition; Amendment 1-1996

IEC 60489-2 Methods of Measurement for Radio Equipment Used inthe Mobile Services Part 2: Transmitters EmployingA3E, F3E or G3E Emissions Second Edition

IEC 60489-3 Methods of Measurement for Radio Equipment Used inthe Mobile Services Part 3: Receivers for A3E orF3E Emissions Second Edition

IEC 60489-4 Methods of Measurement for Radio Equipment Used inthe Mobile Services Part 4: Transmitters EmployingSingle-Sideband Emissions (R3E, H3E or J3E) SecondEdition

IEC 60489-5 Methods of Measurement for Radio Equipment Used inthe Mobile Services Part 5: Receivers EmployingSingle-Sideband Techniques (R3E, H3E or J3E) SecondEdition

IEC 60489-6 Methods of Measurement for Radio Equipment Used inthe Mobile Services Part 6: Selective-Calling andData Equipment Second Edition; Amendment 1-1989; Amendment 2-1991

IEC 60489-8 Methods of Measurement for Radio Equipment Used inthe Mobile Services Part 8: Methods of Measurementfor Antennas First Edition

IEC 60491 Safety Requirements for Electronic Flash Apparatusfor Photographic Purposes Second Edition

IEC 60492 Measuring Methods for Aerial Rods First Edition IEC 60493-1 Guide for the Statistical Analysis of Ageing Test

Data Part 1: Methods Based on Mean Values ofNormally Distributed Test Results First Edition

IEC 60494 Rules for Pantographs of Electric Rolling StockFirst Edition

IEC 60495 Single Sideband Power-Line Carrier Terminals SecondEdition

IEC 60496 Methods for Measuring Performance of ElectricWarming Plates for Household and Similar PurposesFirst Edition; Amendment 1-1977; Amendment 2-1992

IEC 60497 International Code for Model Acceptance Tests ofStorage Pumps First Edition; Corrigendum-02/1978

IEC 60498 High-Voltage Coaxial Connectors Used in NuclearInstrumentation First Edition

IEC 60499-1 Ceramic Dielectric Disc-Style Rotary Variable Pre-Set Capacitors: Grade 2 Part 1: GeneralRequirements for Tests and Measuring Methods FirstEdition

IEC 60500 IEC Standard Hydrophone First Edition IEC 60501 Safety Requirements for Arc Welding Equipment

- Plugs, Socket-Outlets and Couplers for WeldingCables First Edition

IEC 60502 Extruded Solid Dielectric Insulated Power Cablesfor Rated Voltages from 1 kV up to 30 kV FirstEdition

IEC 60502-1 Power Cables with Extruded Insulation and TheirAccessories for Rated Voltages from 1 kV (Um=1,2kV) up to 30 kV (Um=36 kV) - Part 1: Cables forRated Voltages of 1 kV (Um=1,2 kV) and 3 kV (Um=3,6kV) First Edition; Amendment 1-1998

IEC 60502-2 Power Cables with Extruded Insulation and TheirAccessories for Rated Voltages from 1 kV (Um=1,2kV) up to 30 kV (Um=36 kV) - Part 2: Cables for


Rated Voltages from 6 kV (Um=7,2 kV) and 30 kV (Um=36 kV) First Edition; Amendment 1-1998

IEC 60502-4 Power Cables with Extruded Insulation and TheirAccessories for Rated Voltages from 1kV (Um = 1,2kV) up to 30 kV (Um = 36 kV) - Part 4: TestRequirements on Accessories for Cables with RatedVoltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60503 Spools for Broadcast Videotape Recorders (VTRS) Second Edition

IEC 60504 Hand and/or Foot Contamination Monitors and WarningAssemblies First Edition

IEC 60505 Guide for the Evaluation and Identification ofInsulation Systems of Electrical Equipment FirstEdition

IEC 60506 Standard Impulse Tests on High-Voltage InsulatorsFirst Edition

IEC 60507 Artificial Pollution Tests on High-VoltageInsulators to Be Used on A.C. Systems SecondEdition

IEC 60508 Methods for Measuring the Performance of ElectricIroning Machines for Household and Similar PurposesFirst Edition

IEC 60509 Sealed Nickel-Cadmium Button Rechargeable SingleCells Second Edition

IEC 60510-1 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 1: General Sub-Clause6.2: D.C. Source Conditions First Edition; Supplement A-1980

IEC 60510-1-2 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 1: MeasurementsCommon to Sub-Systems and Combinations of Sub-Systems Section Two: Measurements in the R.F. RangeFirst Edition

IEC 60510-1-3 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 1: MeasurementsCommon to Sub-Systems and Combinations of Sub-Systems Section Three - Measurements in the I.F. Range First Edition; Amendment 1-1988

IEC 60510-1-4 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 1: MeasurementsCommon to Sub-Systems and Combinations of Sub-Systems Section Four - Measurements in the BasebandFirst Edition

IEC 60510-1-5 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 1: MeasurementsCommon to Sub-Systems and Combinations of Sub-Systems Section Five - Noise TemperatureMeasurements First Edition

IEC 60510-2-1 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 2: Measurements forSub-Systems Section One - General Section Two - Antenna (Including Feed Network) First Edition; Amendment 1-1996

IEC 60510-2-3 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 2: Measurements forSub-Systems Section Three - Low-Noise AmplifierFirst Edition

IEC 60510-2-4 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 2: Measurements forSub-Systems Section Four - Up- and Down-ConvertersFirst Edition

IEC 60510-2-5 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 2: Measurements for


Sub-Systems Section Five: Frequency ModulatorsFirst Edition

IEC 60510-2-6 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 2: Measurements forSub-Systems Section Six: Frequency DemodulatorsFirst Edition

IEC 60510-2-7 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 2: Measurements forSub-Systems Section Seven - High Power AmplifierFirst Edition

IEC 60510-3-1 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 3: Methods ofMeasurement for Combinations of Sub-Systems SectionOne - General First Edition

IEC 60510-3-2 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 3: Methods ofMeasurement for Combinations of Sub-Systems SectionTwo: Measurement of the Figure of Merit (G/T) ofthe Receiving System in the 4 GHz to 6 GHz RangeFirst Edition

IEC 60510-3-3 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 3: Methods ofMeasurement for Combination of Sub-Systems SectionThree - Measurements for Monochrome and ColourTelevision Transmission First Edition

IEC 60510-3-4 Methods of Measurement for Radio Equipment Used inSatellite Earth Stations Part 3: Methods ofMeasurement on Combinations of Sub-Systems SectionFour: Measurements for Frequency DivisionMultiplex (f.d.m.) Transmission First Edition

IEC 60511 Helical-Scan Video-Tape Cassette System Using 0.5in (12.70 mm) Magnetic Tape (60 Hz-525 Lines) FirstEdition; Supplement A-1977

IEC 60512-1 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods Part 1: General Third Edition; Corrigendum-08/1995

IEC 60512-1-3 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 1: General Examination - Section 3: Test 1c - Electrical Engagement Length FirstEdition

IEC 60512-1-4 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 1: General - Section 4: Test 1d - Contact Protection Effectiveness (Scoop-Proof) First Edition

IEC 60512-2 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 2: General Examination, ElectricalContinuity and Contact Resistance Tests, InsulationTests and Voltage Stress Tests Second Edition; Amendment 1-1994

IEC 60512-3 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 3: Current-Carrying Capacity TestsFirst Edition

IEC 60512-4 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 4: Dynamic Stress Tests First Edition

IEC 60512-5 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 5: Impact Tests (Free Components), Static Load Tests (Fixed Components), EnduranceTests and Overload Tests Second Edition


IEC 60512-6 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 6: Climatic Tests and Soldering TestsSecond Edition

IEC 60512-6-5 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 6: Dynamic Stress Tests - Section5: Test 6e: Random Vibration First Edition

IEC 60512-7 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 7: Mechanical Operating Tests andSealing Tests Third Edition

IEC 60512-8 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 8: Connector Tests (Mechanical) andMechanical Tests on Contacts and Terminations ThirdEdition

IEC 60512-9 Electromechanical Components for ElectronicEquipment; Basic Testing Procedures and MeasuringMethods Part 9: Miscellaneous Tests Second Edition

IEC 60512-10-4 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 10: Impact Tests (Free Components), Static Load Tests (Fixed Components), EnduranceTests and Overload Tests - Section 4: Test 10d: Electrical Overload (Connectors) First Edition

IEC 60512-11-1 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods Part 11: Climatic Tests Section 1: Test11a - Climatic Sequence First Edition

IEC 60512-11-7 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods Part 11: Climatic Tests - Section 7: Test11g: Flowing Mixed Gas Corrosion Test First Edition

IEC 60512-11-8 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 11: Climatic Tests - Section 8: Test11h - Sand and Dust First Edition

IEC 60512-11-14 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 11: Climatic Tests - Section 14: Test 11p - Flowing Single Gas Corrosion Test FirstEdition

IEC 60512-12-6 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 12: Soldering Tests - Section 6: Test 12f - Sealing Against Flux and CleaningSolvents in Machine Soldering First Edition

IEC 60512-13-1 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 13: Mechanical Operating Tests - Section 1: Test 13a: Engaging and SeparatingForces First Edition

IEC 60512-14-7 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 14: Sealing Tests - Section 7: Test14g: Impacting Water First Edition

IEC 60512-15-8 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 15: Mechanical Tests on Contacts andTerminations - Section 8: Test 15h - ContactRetention System Resistance to Tool ApplicationFirst Edition

IEC 60512-16-20 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and Measuring


Methods Part 16: Mechanical Tests on Contacts andTerminations - Section 20: Test 16t: MechanicalStrength (Wired Termination of SolderlessConnections) First Edition

IEC 60512-19-3 Electromechanical Components for ElectronicEquipment - Basic Testing Procedures and MeasuringMethods - Part 19: Chemical Resistance Test - Section 3: Test 19c - Fluid Resistance FirstEdition

IEC 60513 Fundamental Aspects of Safety Standards for MedicalElectrical Equipment Second Edition

IEC 60514 Acceptance Inspection of Class 2 Alternating-Current Watthour Meters First Edition

IEC 60515 Radiation Detectors for the Instrumentation andProtection of Nuclear Reactors; Characteristics andTest Methods First Edition

IEC 60516 Modular Instrumentation System for Data Handling; CAMAC System First Edition; Amendment 1-1984

IEC 60517 Gas-Insulated Metal-Enclosed Switchgear for RatedVoltages of 72,5 kV and Above Third Edition; Amendment 1-1994; Corrigendum-1995

IEC 60518 Dimensional Standardization of Terminals for High-Voltage Switchgear and Controlgear First Edition

IEC 60519-1 Safety in Electroheat Installations Part I: GeneralRequirements Second Edition

IEC 60519-2 Safety in Electroheat Installations Part 2: Particular Requirements for Resistance HeatingEquipment Second Edition

IEC 60519-3 Safety in Electroheat Installations Part 3: Particular Requirements for Induction andConduction Heating and Induction MeltingInstallations Second Edition; CENELEC EN 60519-3: 1995

IEC 60519-4 Safety in Electroheat Installations - Part 4: Particular Requirements for Arc FurnaceInstallations Second Edition

IEC 60519-5 Safety in Electroheat Installations Part 5: Specifications for Safety in Plasma InstallationsFirst Edition

IEC 60519-6 Safety in Electroheat Installations Part 6: Specifications for Safety in Industrial MicrowaveHeating Equipment First Edition

IEC 60519-7 Safety in Electroheat Installations Part 7: Particular Requirements for Installations withElectron Guns First Edition

IEC 60519-8 Safety in Electroheat Installations Part 8: Particular Requirements for Electro-Slag RemeltingFurnaces First Edition

IEC 60519-9 Safety in Electroheat Installations Part 9: Particular Requirements for High-FrequencyDielectric Heating Installations First Edition; CENELEC EN 60519-9: 1995

IEC 60519-11 Safety in Electroheat Installations - Part 11: Particular Requirements for Installations forElectromagnetic Stirring, Transport or Pouring ofMetal Liquids First Edition

IEC 60519-21 Safety in Electroheat Installations - Part 21: Particular Requirements for Resistance HeatingEquipment - Heating and Melting Glass EquipmentFirst Edition

IEC 60520 Entrance Field Sizes of Electro-Optical X-Ray ImageIntensifiers First Edition

IEC 60521 Class 0.5, 1 and 2 Alternating-Current WatthourMeters Second Edition


IEC 60522 Inherent Filtration of an X-Ray Tube Assembly FirstEdition

IEC 60523 Direct-Current Potentiometers First Edition; Amendment 1-1979; Amendment 2-1997

IEC 60524 Direct-Current Resistive Volt Ratio Boxes FirstEdition; Amendment 1-1981; Amendment 2-1997

IEC 60525 Dimensions of Toroids Made of Magnetic Oxides orIron Powder First Edition; Amendment 1-1980

IEC 60526 High-Voltage Cable Plug and Socket Connections forMedical X-Ray Equipment Second Edition

IEC 60527 Direct Current Amplifiers; Characteristics and TestMethods First Edition

IEC 60528 Expression of Performance of Air Quality Infra-RedAnalyzers First Edition

IEC 60529 Degrees of Protection Provided by Enclosures (IPCode) S Second Edition

IEC 60530 Methods for Measuring Performance of ElectricKettles and Jugs for Household and Similar UseFirst Edition; Amendment 1-1992

IEC 60531 Methods for Measuring the Performance of HouseholdElectric Room Heaters of the Storage Type FirstEdition

IEC 60532 Radiation Protection Instrumentation - InstalledDose Ratemeters, Warning Assemblies and Monitors - X and Gamma Radiation of Energy between 50 keVand 7 MeV Second Edition

IEC 60533 Electromagnetic Compatibility of Electrical andElectronic Installations in Ships First Edition

IEC 60534-1 Industrial-Process Control Valves Part 1: ControlValve Terminology and General Considerations SecondEdition; (CENELEC EN 60534-1: 1993)

IEC 60534-2 Industrial-Process Control Valves Part 2: FlowCapacity Section One - Sizing Equations forIncompressible Fluid Flow under InstalledConditions First Edition

IEC 60534-2-2 Industrial-Process Control Valves Part 2: FlowCapacity Section Two - Sizing Equations forCompressible Fluid Flow under Installed ConditionsFirst Edition

IEC 60534-2-3 Industrial-Process Control Valves - Part 2-3: FlowCapacity - Test Procedures Second Edition

IEC 60534-2-4 Industrial-Process Control Valves Part 2: FlowCapacity Section Four - Inherent FlowCharacteristics and Rangeability First Edition

IEC 60534-3 Industrial-Process Control Valves Part 3: Dimensions Section One - Face-to-Face Dimensionsfor Flanged, Two-Way, Globe-Type Control ValvesFirst Edition

IEC 60534-3-2 Industrial-Process Control Valves Part 3: Dimensions Section Two - Face-to-Face Dimensionsfor Flangeless Control Valves Except WaferButterfly Valves First Edition

IEC 60534-4 Industrial-Process Control Valves Part 4: Inspection and Routine Testing First Edition; (Amendment 1-1986)

IEC 60534-5 Industrial-Process Control Valves Part 5: MarkingFirst Edition

IEC 60534-6 Industrial-Process Control Valves Part 6: MountingDetails for Attachment of Positioners to ControlValve Actuators First Edition

IEC 60534-6-1 Industrial-Process Control Valves - Part 6: Mounting Details for Attachment of Positioners toControl Valves - Section 1: Positioner Mounting onLinear Actuators First Edition


IEC 60534-7 Industrial-Process Control Valves Part 7: ControlValve Data Sheet First Edition

IEC 60534-8-1 Industrial-Process Control Valves Part 8: NoiseConsiderations Section One - Laboratory Measurementof Noise Generated by Aerodynamic Flow ThroughControl Valves First Edition

IEC 60534-8-2 Industrial-Process Control Valves Part 8: NoiseConsiderations Section 2: Laboratory Measurement ofNoise Generated by Hydrodynamic Flow ThroughControl Valves First Edition

IEC 60534-8-3 Industrial-Process Control Valves - Part 8: NoiseConsiderations - Section 3: Control ValveAerodynamic Noise Prediction Method First Edition

IEC 60534-8-4 Industrial-Process Control Valves - Part 8: NoiseConsiderations - Section 4: Prediction of NoiseGenerated by Hydrodynamic Flow First Edition

IEC 60535 Jet Fans and Regulators First Edition IEC 60536 Classification of Electrical and Electronic

Equipment with Regard to Protection AgainstElectric Shock First Edition

IEC 60536-2 Classification of Electrical and ElectronicEquipment with Regard to Protection AgainstElectric Shock Part 2: Guidelines to Requirementsfor Protection Against Electric Shock First Edition

IEC 60537 Frequency Weighting for the Measurement of AircraftNoise (D-Weighting) First Edition; Withdrawn

IEC 60539 Directly Heated Negative Temperature CoefficientThermistors First Edition

IEC 60541 Comparative Information on IEC and North-AmericanFlexible Cord Types First Edition; Withdrawn

IEC 60542 Application Guide for On-Load Tap-Changers FirstEdition; (Amendment 1-1988)

IEC 60543 Informative Guide for Subjective Listening TestsFirst Edition

IEC 60544-1 Electrical Insulating Materials - Determination ofthe Effects of Ionizing Radiation - Part 1: Radiation Interaction and Dosimetry SecondEdition; CENELEC EN 60544-1: 1994

IEC 60544-2 Guide for Determining the Effects of IonizingRadiation on Insulating Materials Part 2: Procedures for Irradiation and Test Second Edition

IEC 60544-4 Guide for Determining the Effects of IonizingRadiation on Insulating Materials Part 4: Classification System for Service in RadiationEnvironments First Edition

IEC 60545 Guide for Commissioning, Operation and Maintenanceof Hydraulic Turbines First Edition

IEC 60546-1 Controllers with Analogue Signals for Use inIndustrial-Process Control Systems Part 1: Methodsof Evaluating the Performance Second Edition

IEC 60546-2 Controllers with Analogue Signals for Use inIndustrial-Process Control Systems Part 2: Guidancefor Inspection and Routine Testing First Edition

IEC 60547 Modular Plug-In Unit and Standard 19-Inch RackMounting Unit Based on NIM Standard (for ElectronicNuclear Instruments) First Edition; Amendment1-1985

IEC 60548 Expression of the Properties of SamplingOscilloscopes First Edition

IEC 60549 High-Voltage Fuses for the External Protection ofShunt Power Capacitors First Edition

IEC 60551 Determination of Transformer and Reactor SoundLevels Second Edition; Amendment 1-1995

IEC 60552 CAMAC - Organization of Multi-Crate Systems


Specification of the Branch-Highway and CAMAC CrateController Type A1 First Edition; (Amendment1-1984)

IEC 60554-1 Specification for Cellulosic Papers for ElectricalPurposes Part 1: Definitions and GeneralRequirements First Edition; Erratum-03/1979; Amendment 1-1983

IEC 60554-2 Specification for Cellulosic Papers for ElectricalPurposes Part 2: Methods of Test First Edition; (Amendment 1-1982) (Amendment 2-1984) (Corrigendum-1994) (Amendment 3-1995)

IEC 60554-3-1 Specification for Cellulosic Papers for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheet 1: General Purpose Electrical PaperFirst Edition

IEC 60554-3-2 Specification for Cellulosic Papers for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheet 2: Capacitor Paper First Edition

IEC 60554-3-3 Specification for Cellulosic Papers for ElectricalPurposes Part 3: Specification for IndividualMaterials Sheet 3: Crepe Paper First Edition

IEC 60554-3-4 Specification for Cellulosic Papers for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheet 4: Electrolytic Capacitor PaperFirst Edition

IEC 60554-3-5 Specification for Cellulosic Papers for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheet 5: Special Papers First Edition

IEC 60555-1 Disturbances in Supply Systems Caused by HouseholdAppliances and Similar Electrical Equipment Part1: Definitions First Edition

IEC 60555-3 Disturbances in Supply Systems Caused by HouseholdAppliances and Similar Electrical Equipment Part3: Voltage Fluctuations First Edition; Amendment1-1990; Corrigendum-06/1990

IEC 60556 Measuring Methods for Properties of GyromagneticMaterials Intended for Application at MicrowaveFrequencies First Edition; Amendment 1-1997

IEC 60557 IEC Terminology in the Nuclear Reactor Field FirstEdition

IEC 60558 Type C Helical Video Tape Recorders First Edition; (Amendment 1-1987) (Amendment 2-1993)

IEC 60559 Binary Floating-Point Arithmetic for MicroprocessorSystems Second Edition

IEC 60560 Definitions and Terminology of Brush-Holders forElectrical Machines First Edition

IEC 60562 Measurements of Incidental Ionizing Radiation fromElectronic Tubes First Edition

IEC 60563 Permissible Limiting Temperatures in Service forComponents of Electrical Equipment of TractionVehicles First Edition

IEC 60564 D.C. Bridges for Measuring Resistance FirstEdition; Amendment 1-1981; Amendment 2-1997

IEC 60565 Calibration of Hydrophones First Edition; (Supplement A-1980)

IEC 60567 Guide for the Sampling of Gases and of Oil fromOil-Filled Electrical Equipment and for theAnalysis of Free and Dissolved Gases Second Edition

IEC 60568 In-Core Instrumentation for Neutron Fluence Rate (Flux) Measurements in Power Reactors First Edition

IEC 60569 Informative Guide for Subjective Tests onTelevision Receivers First Edition

IEC 60570 Electrical Supply Track Systems for LuminairesThird Edition; Amendment 1- 1998


IEC 60570-2-1 Electrical Supply Track Systems for Luminaires - Part 2: Mixed Supply Systems - Section 1: ClassesI and III First Edition; Amendment 1-1996

IEC 60571 Electronic Equipment Used on Rail Vehicles SecondEdition

IEC 60571-2 Electronic Equipment Used on Rail Vehicles Part 2: Standardization of Certain Mechanical andElectrical Quantities - Principles of Test DevicesFirst Edition

IEC 60571-3 Electronic Equipment Used on Rail Vehicles Part 3: Components, Programmable Electronic Equipment andElectronic System Reliability First Edition

IEC 60572 Determination of the Luminance Distribution ofElectro-Optical X-Ray Image Intensifiers FirstEdition

IEC 60573 Measurement of the Conversion Factor of Electro-Optical X-Ray Image Intensifiers First Edition; Corrigenda-06/1978

IEC 60574-1 Audio-Visual, Video and Television Equipment andSystems Part 1: General First Edition

IEC 60574-2 Audiovisual, Video and Television Equipment andSystems Part 2: Definition of General Terms SecondEdition

IEC 60574-3 Audio-Visual, Video and Television Equipment andSystems Part 3: Connectors for the Interconnectionof Equipment in Audio-Visual Systems First Edition

IEC 60574-4 Audiovisual, Video and Television Equipment andSystems Part 4: Preferred Matching Values for theInterconnection of Equipment in a System FirstEdition; Amendment 1-1991; Replaced by IEC 1938: 1996

IEC 60574-5 Audio-Visual, Video and Television Equipment andSystems Part 5: Control, Synchronization andAddress Codes Chapter I: Synchronized Tape/VisualOperating Practice First Edition

IEC 60574-5-2 Audio-Visual, Video and Television Equipment andSystems Part 5: Control, Synchronization andAddress Codes Chapter II: Control Systems for TwoStill Projectors Operating Practice First Edition

IEC 60574-7 Audiovisual, Video and Television Equipment andSystems Part 7: Safe Handling and Operation ofAudiovisual Equipment First Edition

IEC 60574-8 Audiovisual, Video and Television Equipment andSystems Part 8: Symbols and Identification FirstEdition; (Amendment 1-1988)

IEC 60574-10 Audiovisual, Video and Television Equipment andSystems Part 10: Audio Cassette Systems SecondEdition; Amendment 2-1989, Incorporating Amendment1

IEC 60574-11 Audiovisual, Video and Television Equipment andSystems Part 11: Video Recording Systems - Operating Practices to Facilitate Browsing FirstEdition

IEC 60574-13 Audio-Visual, Video and Television Equipment andSystems Part 13: Digital Counter for Audio CassetteSystems First Edition

IEC 60574-14 Audio-Visual, Video and Television Equipment andSystems Part 14: Audio Striped Card System FirstEdition; (Amendment 1-1988)

IEC 60574-15 Audio-Visual, Video and Television Equipment andSystems Part 15: Audio Pages First Edition

IEC 60574-16 Audio-Visual, Video and Television Equipment andSystems Part 16: Labelling for Educational AudioCassettes First Edition; (ANSI IT7.401-89)


IEC 60574-17 Audiovisual, Video and Television Equipment andSystems Part 17: Audio-Learning Systems FirstEdition

IEC 60574-18 Audiovisual, Video and Television Equipment andSystems Part 18: Connectors for Automatic SlideProjectors with Built-In Triacs for AudiovisualApplication First Edition

IEC 60574-20 Audiovisual, Video and Television Equipment andSystems Part 20: Methods of Measuring and Reportingthe Performance of 16 mm Sound Film ProjectorsFirst Edition

IEC 60574-21 Audiovisual, Video and Television Equipment andSystems Part 21: Video Tape Leader and Trailer forEducation and Training Applications First Edition

IEC 60575 Thermal-Mechanical Performance Test and MechanicalPerformance Test on String Insulator Units FirstEdition

IEC 60576 Portable Bore-Hole Logging Equipment (down to 300m): General Characteristics First Edition

IEC 60579 Radioactive Aerosol Contamination Meters andMonitors First Edition

IEC 60580 Area Exposure Product Meter First Edition IEC 60581-1 High Fidelity Audio Equipment and Systems; Minimum

Performance Requirements Part 1: General FirstEdition

IEC 60581-2 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 2: FM Radio TunersFirst Edition

IEC 60581-3 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 3: Record PlayingEquipment and Cartridges First Edition

IEC 60581-4 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 4: Magnetic Recordingand Reproducing Equipment First Edition

IEC 60581-5 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 5: Microphones FirstEdition

IEC 60581-6 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 6: Amplifiers FirstEdition

IEC 60581-7 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 7: Loudspeakers FirstEdition

IEC 60581-8 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 8: CombinationEquipment First Edition

IEC 60581-10 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 10: Headphones FirstEdition

IEC 60581-11 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 11: High FidelitySystems for Use in Vehicles (for Example, MotorCars) First Edition

IEC 60581-12 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 12: Sound Output ofTelevision Tuners First Edition

IEC 60581-13 High Fidelity Audio Equipment and Systems; MinimumPerformance Requirements Part 13: High FidelitySystems for Use in Vehicles (for Example, MotorCars): FM Radio Tuner Units First Edition

IEC 60582 Dimensions of Vials for Liquid ScintillationCounting First Edition

IEC 60583 Dimensions of Test Tubes Made of Glass or Plasticsfor Radioactivity Measurements First Edition;


(Supplement A-1981) IEC 60584-1 Thermocouples Part 1: Reference Tables Second

Edition IEC 60584-2 Thermocouples Part 2: Tolerances First Edition;

Amendment 1-1989 IEC 60584-3 Thermocouples Part 3: Extension and Compensating

Cables - Tolerances and Identification System FirstEdition

IEC 60587 Test Methods for Evaluating Resistance to Trackingand Erosion of Electrical Insulating Materials Usedunder Severe Ambient Conditions Second Edition

IEC 60588-1 Askarels for Transformers and Capacitors Part 1: General First Edition

IEC 60588-2 Askarels for Transformers and Capacitors Part 2: Test Methods First Edition

IEC 60588-3 Askarels for Transformers and Capacitors Part 3: Specifications for New Askarels First Edition

IEC 60588-4 Askarels for Transformers and Capacitors Part 4: Guide for Maintenance of Transformer Askarel inEquipment First Edition

IEC 60588-5 Askarels for Transformers and Capacitors Part 5: Screening Test for Compatibility of Materials andTransformer Askarels First Edition

IEC 60588-6 Askarels for Transformers and Capacitors Part 6: Screening Test for Effects of Materials onCapacitor Askarels First Edition

IEC 60589 Methods of Test for the Determination of IonicPurities in Electrical Insulating Materials byExtraction with Liquids First Edition; Corrigendum-06/1978

IEC 60590 Determination of the Aromatic Hydrocarbon Contentof New Mineral Insulating Oils First Edition; Corrigendum-07/1978

IEC 60591 Sampling Rules and Acceptance Criteria WhenApplying Statistical Control Methods for Mech andElmch Tests on Insulators of Ceramic Material orGlass for Overhead Lines with a Nominal VoltageGreater Than 1000 V First Edition

IEC 60593 Internal Fuses and Internal OverpressureDisconnectors for Shunt Capacitors First Edition; (Amendment 1-1980) (Amendment 2-1986)

IEC 60594 Internal Fuses and Internal OverpressureDisconnectors for Capacitors for Inductive HeatGenerating Plants First Edition; (Amendment 2-1987)

IEC 60595 Internal Fuses for Series Capacitors FirstEdition; (Amendment 2-1987)

IEC 60596 Definitions of Test Method Terms for SemiconductorRadiation Detectors and Scintillation CountingFirst Edition

IEC 60597-1 Aerials for the Reception of Sound and TelevisionBroadcasting in the Frequency Range 30 MHz to 1 GHzPart 1: Electrical and Mechanical CharacteristicsFirst Edition

IEC 60597-2 Aerials for the Reception of Sound and TelevisionBroadcasting in the Frequency Range 30 MHz to 1 GHzPart 2: Methods of Measurement of ElectricalPerformance Parameters First Edition

IEC 60597-3 Aerials for the Reception of Sound and TelevisionBroadcasting in the Frequency Range 30 MHz to 1 GHzPart 3: Methods of Measurement of MechanicalProperties, Vibration and Environmental Tests FirstEdition

IEC 60597-4 Aerials for the Reception of Sound and TelevisionBroadcasting in the Frequency Range 30 MHz to 1 GHz


Part 4: Guide for the Preparation of AerialPerformance Specifications, Detailed SpecificationsSheet Format First Edition

IEC 60598-1 Luminaires - Part 1: General Requirements and TestsFourth Edition; Interpretation-1997; Amendment1-1998

IEC 60598-2-1 Luminaires Part 2: Particular Requirements SectionOne - Fixed General Purpose Luminaires FirstEdition; (Amendment 1-1987)

IEC 60598-2-2 Luminaires - Part 2: Particular Requirements - Section 2: Recessed Luminaires Edition 2.1; Edition 2: 1996 Consolidated with Amendment 1: 1997

IEC 60598-2-3 Luminaires - Part 2: Particular RequirementsSection Three: Luminaires for Road and StreetLighting Edition 2.1; Edition 2: 1993 Consolidatedwith Amendment 1: 1997

IEC 60598-2-4 Luminaires - Part 2: Particular Requirements - Section 4: Portable General Purpose LuminairesSecond Edition

IEC 60598-2-5 Luminaires - Part 2-5: Particular Requirements - Floodlights Second Edition

IEC 60598-2-6 Luminaires - Part 2: Particular Requirements - Section 6: Luminaires with Built-In Transformersfor Filament Lamps Second Edition; Amendment 1-1996

IEC 60598-2-7 Luminaires Part 2: Particular Requirements SectionSeven - Portable Luminaires for Garden Use FirstEdition; Amendment 1-1987; Amendment 2-1994

IEC 60598-2-8 Luminaires - Part 2: Particular Requirements - Section 8: Handlamps Second Edition

IEC 60598-2-9 Luminaires Part 2: Particular Requirements Section9: Photo and Film Luminaires (Non-Professional) Second Edition; (Amendment 1-1993)

IEC 60598-2-10 Luminaires Part 2: Particular Requirements SectionTen: Portable Child-Appealing Luminaires FirstEdition; (Amendment 1-1990) (Amendment 2-1995)

IEC 60598-2-17 Luminaires Part 2: Particular Requirements SectionSeventeen - Luminaires for Stage Lighting, Television, Film and Photographic Studios (Outdoorand Indoor) First Edition; (Amendment 2-1990, Incorporating Amendment 1)

IEC 60598-2-18 Luminaires Part 2: Particular Requirements Section18: Luminaires for Swimming Pools and SimilarApplications Second Edition

IEC 60598-2-19 Luminaires Part 2: Particular Requirements SectionNineteen - Air-Handling Luminaires (SafetyRequirements) First Edition

IEC 60598-2-20 Luminaires - Part 2: Particular Requirements - Section 20: Lighting Chains Second Edition; Amendment 1-1998

IEC 60598-2-22 Luminaires - Part 2-22: Particular Requirements - Luminaires for Emergency Lighting Third Edition

IEC 60598-2-23 Luminaires - Part 2: Particular Requirements - Section 23: Extra Low Voltage Lighting Systemsfor Filament Lamps First Edition

IEC 60598-2-24 Luminaires - Part 2-24: Particular Requirements - Luminaires with Limited Surface TemperaturesFirst Edition

IEC 60598-2-25 Luminaires for Use in Clinical Areas of Hospitalsand Health Care Buildings First Edition; Corrigendum 09/1994; EN 60598-2-25: 1994

IEC 60599 Interpretation of the Analysis of Gases inTransformers and Other Oil-Filled ElectricalEquipment in Service First Edition

IEC 60600 Equipment for Minehead Assay and Shorting


Radioactive Ores in Containers First Edition IEC 60601-1 Medical Electrical Equipment Part 1: General

Requirements for Safety Second Edition; (Amendment1-1991) (CENELEC EN 60601-1: 1990) (Amendment2-1995) (Corrigendum-1995)

IEC 60601-1-1 Medical Electrical Equipment Part 1: GeneralRequirements for Safety 1. Collateral Standard: Safety Requirements for Medical Electrical SystemsFirst Edition; (CENELEC EN 60601-1-1: 1993) (Amendment 1-1995)

IEC 60601-1-2 Medical Electrical Equipment Part 1: GeneralRequirements for Safety 2. Collateral Standard: Electromagnetic Compatibility - Requirements andTests First Edition; (CENELEC EN 60601-1-2: 1993)

IEC 60601-1-3 Medical Electrical Equipment - Part 1: GeneralRequirements for Safety 3. Collateral Standard: General Requirements for Radiation Protection inDiagnostic X-Ray Equipment First Edition; (CENELECEN 60601-1-3: 1994) (AS/NZS 3200.1.3: 1996)

IEC 60601-1-4 Medical Electrical Equipment Part 1: GeneralRequirements for Safety 4. Collateral Standard: Programmable Electrical Medical Systems FirstEdition

IEC 60601-2-1 Safety of Medical Electrical Equipment Part 2: Particular Requirements for Medical ElectronAccelerators in the Range 1 MeV to 50 MeV SectionOne: General Section Two: Radiation Safety forEquipment First Edition; Amendment 1-1984; Amendment 2-1990; CAN/CSA-C22.2 NO 601.2.1-92

IEC 60601-2-2 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of High FrequencySurgical Equipment Second Edition; CAN/CSA-C22.2 NO601.2.2-92; CENELEC EN 60601-2-2: 1993; NZS/AS3200.2.2: 1992

IEC 60601-2-3 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Short-Wave TherapyEquipment Second Edition; (CAN/CSA-C22.2 No. 601.2.3-92) (CENELEC EN 60601-2-3: 1993) (NZS/AS3200.2.3: 1992)

IEC 60601-2-4 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of CardiacDefibrillators and Cardiac Defibrillator-MonitorsFirst Edition; (AS/NZS 3200.2.4: 1993)

IEC 60601-2-5 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Ultrasonic TherapyEquipment First Edition; (NZS/AS 3200.2.5: 1992)

IEC 60601-2-6 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Microwave TherapyEquipment First Edition; (NZS/AS 3200.2.6: 1992)

IEC 60601-2-7 Medical Electrical Equipment - Part 2-7: ParticularRequirements for the Safety of High-VoltageGenerators of Diagnostic X-Ray Generators SecondEdition

IEC 60601-2-8 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Therapeutic X-RayGenerators First Edition; Amendment 1 08 1997

IEC 60601-2-9 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Patient ContactDosemeters Used in Radiotherapy with ElectricallyConnected Radiation Detectors Second Edition

IEC 60601-2-10 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Nerve and MuscleStimulators First Edition

IEC 60601-2-11 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Gamma Beam Therapy


Equipment Second Edition IEC 60601-2-12 Medical Electrical Equipment Part 2: Particular

Requirements for the Safety of Lung Ventilators forMedical Use First Edition

IEC 60601-2-13 Medical Electrical Equipment - Part 2-13: Particular Requirements for the Safety ofAnaesthetic Workstations Second Edition; ISO 8835-1

IEC 60601-2-14 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of ElectroconvulsiveTherapy Equipment First Edition; CAN/CSA-C22.2 NO601.2.14-92; NZS/AS 3200.2.14: 1992

IEC 60601-2-15 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Capacitor DischargeX-Ray Generators First Edition; (AS/NZS 3200.2.15: 1994)

IEC 60601-2-16 Medical Electrical Equipment - Part 2-16: Particular Requirements for the Safety ofHaemodialysis, Haemodiafiltration andHaemofiltration Equipment Second Edition

IEC 60601-2-17 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Remote-ControlledAutomatically-Driven Gamma-Ray AfterloadingEquipment First Edition; AS/NZS 3200.2.17: 1994; Amendment 1-1996; CENELEC EN 60 601-2-17/A1: 1996

IEC 60601-2-18 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Endoscopic EquipmentSecond Edition

IEC 60601-2-19 Medical Electrical Equipment Part 2: ParticularRequirements for Safety of Baby Incubators FirstEdition; (Amendment 1-1996)

IEC 60601-2-20 Medical Electrical Equipment Part 2: ParticularRequirements for Safety of Transport IncubatorsFirst Edition; (Amendment 1-1996)

IEC 60601-2-21 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Infant RadiantWarmers First Edition; (CENELEC EN 60601-2-21: 1994) (AS/NZS 3200.2.21: 1994) (Amendment 1-1996)

IEC 60601-2-22 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Diagnostic andTherapeutic Laser Equipment Second Edition; (CENELEC EN 60601-2-22: 1996)

IEC 60601-2-23 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of TranscutaneousPartial Pressure Monitoring Equipment FirstEdition; (AS/NZS 3200.2.23: 1994)

IEC 60601-2-24 Medical Electrical Equipment - Part 2-24: Particular Requirements for the Safety of InfusionPumps and Controllers First Edition

IEC 60601-2-25 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of ElectrocardiographsFirst Edition; (AS/NZS 3200.2.25: 1993) (CENELEC EN60601-2-25: 1995)

IEC 60601-2-26 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety ofElectroencephalographs First Edition; (CENELEC EN60601-2-26: 1994) (AS/NZS 3200.2.26: 1995)

IEC 60601-2-27 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of ElectrocardiographicMonitoring Equipment First Edition; (CENELEC EN60601-2-27: 1994) (AS/NZS 3200.2.27: 1996)

IEC 60601-2-28 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of X-Ray SourceAssemblies and X-Ray Tube Assemblies for MedicalDiagnosis First Edition; CENELEC EN 60601-2-28:


1993; AS/NZS 3200.2.28: 1994 IEC 60601-2-29 Medical Electrical Equipment Part 2: Particular

Requirements for the Safety of RadiotherapySimulators First Edition; (Amendment 1-1996) (CENELEC EN 60601-2-29: 1995)

IEC 60601-2-30 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Automatic CyclingIndirect Blood Pressure Monitoring Equipment FirstEdition; (CENELEC EN 60601-2-30: 1995) (AS/NZS3200.2.30: 1996)

IEC 60601-2-31 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of External CardiacPacemakers with Internal Power Source FirstEdition; Amendment 1-1998

IEC 60601-2-32 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Associated Equipmentof X-Ray Equipment First Edition; (CENELEC EN60601-2-32: 1994) (AS/NZS 3200.2.32: 1996)

IEC 60601-2-33 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Magnetic ResonanceEquipment for Medical Diagnosis First Edition; (CENELEC EN 60601-2-33: 1995) (AS/NZS 3200.2.33: 1996)

IEC 60601-2-34 Medical Electrical Equipment Part 2: ParticularRequirements for the Safety of Direct BloodPressure Monitoring Equipment First Edition; (CENELEC EN 60601-2-34: 1995) (AS/NZS 3200.2.34: 1996)

IEC 60601-2-35 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Blankets, Pads andMattresses, Intended for Heating in Medical UseFirst Edition

IEC 60601-2-36 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of Equipment forExtracorporeally Induced Lithotripsy First Edition

IEC 60601-2-38 Medical Electrical Equipment - Part 2: ParticularRequirements for the Safety of ElectricallyOperated Hospital Beds First Edition

IEC 60601-2-40 Medical Electrical Equipment - Part 2-40: Particular Requirements for the Safety ofElectromyographs and Evoked Response EquipmentFirst Edition

IEC 60601-2-46 Medical Electrical Equipment - Part 2-46: Particular Requirements for the Safety of OperatingTables First Edition

IEC 60601-3-1 Medical Electrical Equipment - Part 3-1: EssentialPerformance Requirements for Transcutaneous Oxygenand Carbon Dioxide Partial Pressure MonitoringEquipment First Edition

IEC 60602 Type B Helical Video Recorders First Edition; (Amendment 1-1987)

IEC 60603-1 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 1: Generic Specification - General Requirements and Guide for thePreparation of Detail Specifications, with AssessedQuality Second Edition; (Amendment 1-1992) (IECQ QC010000)

IEC 60603-2 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards - Part 2: Detail Specification forTwo-Part Connectors with Assessed Quality, forPrinted Boards, for Basic Grid of 2,54 mm (0,1 in) with Common Mounting Features Third Edition; IECQQC 010000XX0002

IEC 60603-3 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 3: Two-Part Connectors for


Printed Boards Having Contacts Spaced at 2.54 mm (0.100 in) Centres and Staggered Terminations atThat Same Spacing First Edition

IEC 60603-4 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 4: Two-Part Connectors forPrinted Boards Having Contacts Spaced at 1.91 mm (0.075 in) Centres and Staggered Terminations atThat Same Spacing First Edition

IEC 60603-5 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 5: Edge-Socket Connectors andTwo-Part Connectors for Double-Sided Printed Boardswith 2.54 mm (0.1 in) Spacing First Edition

IEC 60603-6 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 6: Edge-Socket Connectors andPrinted-Board Connectors with 2.54 mm (0.1 in) Contact Spacing for Single or Double-Sided PrintedBoards of 1.6 mm (0.063 in) Nominal Thickness FirstEdition

IEC 60603-7 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards - Part 7: Detail Specification forConnectors, 8-Way, Including Fixed and FreeConnectors with Common Mating Features, withAssessed Quality Second Edition; (IECQ010000XX0003)

IEC 60603-8 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 8: Two-Part Connectors forPrinted Boards for Basic Grid of 2,54 mm (0,1 in), with Square Male Contacts of 0,63 mm x 0,63 mmFirst Edition

IEC 60603-9 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 9: Two-Part Connectors forPrinted Boards, Backpanels and Cable Connectors, Basic Grid of 2,54 mm (0,1 in) First Edition

IEC 60603-10 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 10: Two-Part Connectors forPrinted Boards for Basic Grid of 2,54 mm (0,1 in), Inverted Type First Edition

IEC 60603-11 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 11: Detail Specification forConcentric Connectors (Dimensions for FreeConnectors and Fixed Connectors) First Edition

IEC 60603-12 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 12: Detail Specification forDimensions, General Requirements and Tests for aRange of Sockets Designed for Use with IntegratedCircuits First Edition

IEC 60603-13 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards - Part 13: Detail Specification forTwo-Part Connectors of Assessed Quality, forPrinted Boards for Basic Grid of 2,54 mm (0,1 in), with Free Connectors for Non-Accessible InsulationDisplacement Terminations (ID) First Edition; (IECQQC 010000XX0001)

IEC 60603-14 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards - Part 14: Detail Specification forCircular Connectors for Low-Frequency Audio andVideo Applications Such as Audio, Video and Audio-Visual Equipment First Edition

IEC 60604 "Topflash/Flipflash" Photographic Flash Lamp ArrayFirst Edition; (CENELEC EN 60604:1993)

IEC 60605-1 Equipment Reliability Testing Part 1: GeneralRequirements First Edition; (Amendment 1-1982)

IEC 60605-2 Equipment Reliability Testing - Part 2: Design ofTest Cycles First Edition

IEC 60605-3-1 Equipment Reliability Testing Part 3: Preferred


Test Conditions Indoor Portable Equipment - LowDegree of Simulation First Edition

IEC 60605-3-2 Equipment Reliability Testing Part 3: PreferredTest Conditions Equipment for Stationary Use inWeatherprotected Locations - High Degree ofSimulation First Edition

IEC 60605-3-3 Equipment Reliability Testing Part 3: PreferredTest Conditions Section 3: Test Cycle 3: Equipmentfor Stationary Use in Partially WeatherprotectedLocations - Low Degree of Simulation First Edition

IEC 60605-3-4 Equipment Reliability Testing Part 3: PreferredTest Conditions Section 4: Test Cycle 4: Equipmentfor Portable and Non-Stationary Use - Low Degree ofStimulation First Edition

IEC 60605-3-5 Equipment Reliability Testing - Part 3: PreferredTest Conditions - Section 5: Test Cycle 5: GroundMobile Equipment - Low Degree of Simulation FirstEdition; Corrigendum-03/1996

IEC 60605-3-6 Equipment Reliability Testing - Part 3: PreferredTest Conditions - Section 6: Test Cycle 6: OutdoorTransportable Equipment - Low Degree of SimulationFirst Edition

IEC 60605-4 Equipment Reliability Testing Part 4: Proceduresfor Determining Point Estimates and ConfidenceLimits for Equipment Reliability DeterminationTests First Edition; (Amendment 1-1989)

IEC 60605-6 Equipment Reliability Testing - Part 6: Tests forthe Validity of the Constant Failure Rate orConstant Failure Intensity Assumptions SecondEdition

IEC 60608 Interconnections Between Video-Tape Recorders andTelevision Receivers for 50 Hz, 625 Lines SystemsFirst Edition

IEC 60609 Cavitation Pitting Evaluation in HydraulicTurbines, Storage Pumps and Pump-Turbines FirstEdition

IEC 60609-2 Cavitation Pitting Evaluation in HydraulicTurbines, Storage Pumps and Pump-Turbines - Part2: Evaluation in Pelton Turbines First Edition

IEC 60610 Principal Aspects of Functional Evaluation ofElectrical Insulation Systems: Aging Mechanisms andDiagnostic Procedures First Edition

IEC 60611 Guide for the Preparation of Test Procedures forEvaluating the Thermal Endurance of ElectricalInsulation Systems First Edition

IEC 60612 Guide to the Use of Variable Capacitors inElectronic Equipment First Edition

IEC 60613 Electrical, Thermal and Loading Characteristics ofRotating Anode X-Ray Tubes for Medical DiagnosisSecond Edition; (AS/NZS 4394: 1996)

IEC 60614-1 Conduits for Electrical Installations - Specification Part 1: General Requirements SecondEdition; (Amendment 1-1995)

IEC 60614-2-1 Specification for Conduits for ElectricalInstallations Part 2: Particular Specification forConduits Section One - Metal Conduits First Edition

IEC 60614-2-2 Specification for Conduits for ElectricalInstallations Part 2: Particular Specification forConduits; Section Two - Rigid Plain Conduits ofInsulating Materials First Edition; Amendment1-10/1993

IEC 60614-2-3 Specification for Conduits for ElectricalInstallations Part 2: Particular Specifications forConduits Section Three - Pliable Conduits of


Insulating Material First Edition IEC 60614-2-4 Specification for Conduits for Electrical

Installations Part 2: Particular Specifications forConduits Section Four - Pliable Self-RecoveringConduits of Insulating Materials First Edition; (Amendment 1-1993)

IEC 60614-2-5 Specification for Conduits for ElectricalInstallations Part 2: Particular Specifications forConduits Section 5: Flexible Conduits First Edition

IEC 60614-2-6 Specification for Conduits for ElectricalInstallations Part 2: Particular Specifications forConduits Section 6: Pliable Conduits of Metal orComposite Materials First Edition

IEC 60614-2-7 Conduits for Electrical Installations - Specification Part 2: Particular Specificationsfor Conduits Section 7: Rigid Non-ThreadableConduits of Aluminium Alloy First Edition

IEC 60615 Terminology for Microwave Apparatus First Edition IEC 60616 Terminal and Tapping Markings for Power

Transformers First Edition IEC 60617-1 Graphical Symbols for Diagrams Part 1: General

Information, General Index Cross-Reference TablesFirst Edition

IEC 60617-2 Graphical Symbols for Diagrams Part 2: SymbolElements, Qualifying Symbols and Other SymbolsHaving General Application Second Edition

IEC 60617-3 Graphical Symbols for Diagrams Part 3: Conductorsand Connecting Devices Second Edition

IEC 60617-4 Graphical Symbols for Diagrams Part 4: BasicPassive Components Second Edition

IEC 60617-5 Graphical Symbols for Diagrams Part 5: Semiconductors and Electron Tubes Second Edition

IEC 60617-6 Graphical Symbols for Diagrams Part 6: Productionand Conversion of Electrical Energy Second Edition

IEC 60617-7 Graphical Symbols for Diagrams Part 7: Switchgear, Controlgear and Protective Devices Second Edition

IEC 60617-8 Graphical Symbols for Diagrams Part 8: MeasuringInstruments, Lamps and Signalling Devices SecondEdition

IEC 60617-9 Graphical Symbols for Diagrams Part 9: Telecommunications: Switching and PeripheralEquipment Second Edition

IEC 60617-10 Graphical Symbols for Diagrams Part 10: Telecommunications: Transmission Second Edition

IEC 60617-11 Graphical Symbols for Diagrams Part 11: Architectural and Topographical Installation Plansand Diagrams Second Edition

IEC 60617-12 Graphical Symbols for Diagrams - Part 12: BinaryLogic Elements Third Edition

IEC 60617-13 Graphical Symbols for Diagrams Part 13: AnalogueElements Second Edition; (CENELEC EN 60617-13: 1993) (AS/NZS 1102.113: 1995)

IEC 60618 Inductive Voltage Dividers First Edition; Amendment1-1991; Amendment 2-1997

IEC 60619 Electrically Operated Food Preparation Appliances - Measuring Methods Second Edition; CENELEC EN60619: 1993; Corrigendum-07/1993; Amendment 1-1995

IEC 60620 Dimensions for the Mounting of Single-Hole, Bush-Mounted, Spindle-Operated Electronic ComponentsSecond Edition

IEC 60621-1 Electrical Installations for Outdoor Sites underHeavy Conditions (Including Open-Cast Mines andQuarries) Part 1: Scope and Definitions SecondEdition


IEC 60621-2 Electrical Installations for Outdoor Sites underHeavy Conditions (Including Open-Cast Mines andQuarries) Part 2: General Protection RequirementsSecond Edition

IEC 60621-3 Electrical Installations for Outdoor Sites underHeavy Conditions (Including Open-Cast Mines andQuarries) Part 3: General Requirements forEquipment and Ancillaries First Edition; Amendment1-1986

IEC 60621-4 Electrical Installations for Outdoor Sites underHeavy Conditions (Including Open-Cast Mines andQuarries) Part 4: Requirements for the InstallationFirst Edition; Amendment 1-1987

IEC 60621-5 Electrical Installations for Outdoor Sites underHeavy Conditions (Including Open-Cast Mines andQuarries) Part 5: Operating Requirements FirstEdition

IEC 60622 Sealed Nickel-Cadmium Prismatic Rechargeable SingleCells Second Edition; Amendment 2-1992, Incorporating Amendment 1-1989; Corrigendum-08/1992, to Amendment 2; CENELEC EN60622: 1995

IEC 60623 Vented Nickel-Cadmium Prismatic Rechargeable SingleCells Third Edition; (Amendment 1-2:1992) (CENELECEN 60623: 1995)

IEC 60624 Expression of the Performance of Pulse GeneratorsFirst Edition

IEC 60625-1 Programmable Measuring Instruments - InterfaceSystem (Byte Serial, Bit Parallel) - Part 1: Functional, Electrical and MechanicalSpecifications, System Applications andRequirements for the Designer and User SecondEdition

IEC 60625-2 Programmable Measuring Instruments - InterfaceSystem (Byte Serial, Bit Parallel) - Part 2: Codes, Formats, Protocols and Common CommandsSecond Edition

IEC 60626-1 Combined Flexible Materials for ElectricalInsulation - Part 1: Definitions and GeneralRequirements Second Edition; (CENELEC EN 60626-1: 1995) (Amendment 1-1996)

IEC 60626-2 Combined Flexible Materials for ElectricalInsulation - Part 2: Methods of Test SecondEdition; CENELEC EN 60626-2: 1995

IEC 60626-3 Combined Flexible Materials for ElectricalInsulation - Part 3: Specifications for IndividualMaterials Second Edition

IEC 60627 Characteristics of Anti-Scatter Grids Used in X-RayEquipment First Edition

IEC 60628 Gassing of Insulating Liquids under ElectricalStress and Ionization Second Edition; Corrigendum-10/1986

IEC 60629 Standard Sheets for a Modular System (forInstallation Accessories for Use in Domestic andSimilar Installations) First Edition

IEC 60630 Maximum Lamp Outlines for Incandescent Lamps SecondEdition; Amendment 1-1997; Amendment 2-1998

IEC 60631 Characteristics and Tests of Electrodynamic andElectromagnetic Braking Systems First Edition

IEC 60632-1 High-Voltage Motor Starters Part 1: Direct-on-Line (Full Voltage) A.C. Starters First Edition

IEC 60633 Terminology for High-Voltage Direct CurrentTransmission

IEC 60634 Heat Test Source (H.T.S.) Lamps for Carrying out


Heating Tests on Luminaires Second Edition; CENELECEN 60634: 1995

IEC 60635 Toroidal Strip-Wound Cores Made of MagneticallySoft Material First Edition; Amendment 1-1997

IEC 60636 Flexible Waveguide Assembly Performance FirstEdition

IEC 60638 Criteria for Assessing and Coding of theCommutation of Rotating Electrical Machines forTraction First Edition

IEC 60639 Nuclear Reactors Use of the Protection System forNon-Safety Purposes First Edition

IEC 60640 CAMAC - Serial Highway Interface System FirstEdition; (Amendment 1-1984)

IEC 60641-1 Specification for Pressboard and Presspaper forElectrical Purposes Part 1: Definitions and GeneralRequirements First Edition; (Amendment 1-1993) (CENELEC EN 60641-1: 1995)

IEC 60641-2 Specification for Pressboard and Presspaper forElectrical Purposes Part 2: Methods of Test FirstEdition; Amendment 1-1993; Corrigendum-10/1994; CENELEC EN 60 641-2: 1995

IEC 60641-3-1 Specification for Pressboard and Presspaper forElectrical Purposes Part 3: Specifications forIndividual Materials - Sheet 1: Requirements forPressboard, Types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1 FirstEdition

IEC 60641-3-2 Specification for Pressboard and Presspaper forElectrical Purposes Part 3: Specifications forIndividual Materials - Sheet 2: Requirements forPresspaper, Types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1and P.7.1 First Edition; CENELEC EN 60641-3-2: 1994

IEC 60642 Piezoelectric Ceramic Resonators and ResonatorUnits for Frequency Control and Selection ChapterI: Standard Values and Conditions Chapter II: Measuring and Test Conditions First Edition; (Amendment 1-1992)

IEC 60642-2 Piezoelectric Ceramic Resonator Units - Part 2: Guide to the Use of Piezoelectric Ceramic ResonatorUnits First Edition

IEC 60642-3 Piezoelectric Ceramic Resonators Part 3: StandardOutlines First Edition

IEC 60643 Application of Digital Computers to Nuclear ReactorInstrumentation and Control First Edition

IEC 60644 Specification for High-Voltage Fuse-Links for MotorCircuit Applications First Edition; CENELEC EN60644: 1993

IEC 60645-1 Audiometers Part 1: Pure-Tone Audiometers FirstEdition; (Corrigendum-1993) (CENELEC EN 60645-1: 1994)

IEC 60645-2 Audiometers Part 2: Equipment for Speech AudiometryFirst Edition

IEC 60645-3 Audiometers Part 3: Auditory Test Signals of ShortDuration for Audiometric and Neuro-OtologicalPurposes First Edition; (CENELEC EN 60645-6: 1995)

IEC 60645-4 Audiometers Part 4: Equipment for Extended High-Frequency Audiometry First Edition

IEC 60646 Test Methods for Crucible Induction Furnaces SecondEdition

IEC 60647 Dimensions for Magnetic Oxide Cores Intended forUse in Power Supplies (EC-Cores) First Edition

IEC 60648 Method of Test for Coefficients of Friction ofPlastic Film and Sheeting for Use as ElectricalInsulation First Edition


IEC 60649 Calculation of Maximum External Diameter of Cablesfor Indoor Installations First Edition

IEC 60650 Analogue Counting Ratemeters Characteristics andTest Methods First Edition

IEC 60651 Sound Level Meters First Edition; Amendment1-1993; Corrigendum-03/1994; CENELEC EN 60651: 1994 + AMD A1: 1994

IEC 60652 Loading Tests on Overhead Line Towers First Edition IEC 60653 General Considerations on Ultrasonic Cleaning First

Edition IEC 60654-1 Industrial-Process Measurement and Control

Equipment - Operating Conditions - Part 1: ClimaticConditions Second Edition; (CENELEC EN 60654-1: 1993)

IEC 60654-2 Operating Conditions for Industrial-ProcessMeasurement and Control Equipment Part 2: PowerFirst Edition; (Amendment 1-1992) (CENELEC HD 413.2S2: 1994)

IEC 60654-3 Operating Conditions for Industrial-ProcessMeasurement and Control Equipment Part 3: Mechanical Influences First Edition

IEC 60654-4 Operating Conditions for Industrial-ProcessMeasurement and Control Equipment Part 4: Corrosiveand Erosive Influences First Edition

IEC 60655 Values for the Difference between Free-Field andPressure Sensitivity Levels for One-Inch StandardCondenser Microphones First Edition

IEC 60657 Non-Ionizing Radiation Hazards in the FrequencyRange from 10 MHz to 300 000 MHz First Edition

IEC 60658 Radiographic Intensifying Screens for Medical Use - Dimensions First Edition

IEC 60659 Test Methods for Multichannel Amplitude AnalyzersFirst Edition; Withdrawn; Replaced by IEC 1342: 1995

IEC 60660 Test on Indoor Post Insulators of Organic Materialfor Systems with Nominal Voltages Greater Than 1000V up to but Not Including 300 kV First Edition

IEC 60661 Methods for Measuring the Performance of ElectricHousehold Coffee Makers First Edition; (Amendment1-1992)

IEC 60662 High-Pressure Sodium Vapour Lamps First Edition; Corrigendum-1981; Amended in Accordance withAmendments: 1-1986; 2-1987; 3-1990; 4-1992 and5-1993; Amendment 6-1994; Amendment 7-1995; Amendment 8-1995; Amendment 9-1997; Amendment10-1997; Includes A4: 1986 + A5: 1994 + A6: 1994 + A7: 1995

IEC 60663 Planning of (Single-Sideband) Power Line CarrierSystems First Edition

IEC 60664-1 Insulation Coordination for Equipment within Low-Voltage Systems Part 1: Principles, Requirementsand Tests First Edition

IEC TR 60664-2-1 Insulation Coordination for Equipment within Low-Voltage Systems - Part 2-1: Application Guide - Dimensioning Procedure Worksheets andDimensioning Examples First Edition

IEC 60664-3 Insulation Coordination for Equipment within Low-Voltage Systems Part 3: Use of Coatings to AchieveInsulation Coordination of Printed Board AssembliesFirst Edition

IEC 60664-4 Insulation Coordination for Equipment within Low-Voltage Systems - Part 4: Considerations of High-Frequency Voltage Stress First Edition

IEC 60665 A.C. Electric Ventilating Fans and Regulators for


Household and Similar Purposes First Edition IEC 60666 Detection and Determination of Specified Anti-

Oxidant Additives in Insulating Oils First Edition IEC 60667-1 Specification for Vulcanized Fibre for Electrical

Purposes Part 1: Definitions and GeneralRequirements First Edition

IEC 60667-2 Specification for Vulcanized Fibre for ElectricalPurposes Part 2: Methods of Test First Edition; (Amendment 1-1986)

IEC 60667-3-1 Specification for Vulcanized Fibre for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheet 1: Flat Sheets First Edition

IEC 60668 Dimensions of Panel Areas and Cut-outs for Paneland Rack-Mounted Industrial-Process Measurement andControl Instruments First Edition

IEC 60669-1 Switches for Household and Similar Fixed-ElectricalInstallations - Part 1: General Requirements ThirdEdition

IEC 60669-2-1 Switches for Household and Similar Fixed ElectricalInstallations - Part 2: Particular Requirements - Section 1: Electronic Switches Third Edition; Amendment 1-1997

IEC 60669-2-2 Switches for Household and Similar Fixed ElectricalInstallations - Part 2: Particular Requirements - Section 2: Electromagnetic Remote-ControlSwitches (RCS) Second Edition; Amendment 1-1997

IEC 60669-2-3 Switches for Household and Similar Fixed ElectricalInstallations - Part 2-3: Particular Requirements - Time-Delay Switches (TDS) Second Edition

IEC 60670 General Requirements for Enclosures for Accessoriesfor Household and Similar Fixed ElectricalInstallations Second Edition; (Amendment 1-1994)

IEC 60671 Periodic Tests and Monitoring of the ProtectionSystem of Nuclear Reactors First Edition

IEC 60672-1 Ceramic and Glass Insulating Materials - Part 1: Definitions and Classification Second Edition; CENELEC EN 60672-1: 1995

IEC 60672-2 Specification for Ceramic and Glass InsulatingMaterials Part 2: Methods of Test First Edition; Corrigendum-04/1990

IEC 60672-3 Ceramic and Glass-Insulating Materials Part 3: Specifications for Individual Materials SecondEdition

IEC 60673 Low-Frequency Miniature Equipment Wires with Solidor Stranded Conductor, Fluorinated PolyhydrocarbonType Insulation, Single First Edition; Amendment3-1989, Incorporating Amendments 1 and 2

IEC 60674-1 Specification for Plastic Films for ElectricalPurposes Part 1: Definitions and GeneralRequirements First Edition

IEC 60674-2 Specification for Plastic Films for ElectricalPurposes Part 2: Methods of Test First Edition; (Corrigendum-1995)

IEC 60674-3-1 Plastic Films for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Biaxially Oriented Polypropylene (PP) Films forCapacitors First Edition

IEC 60674-3-2 Specification for Plastic Films for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheet 2: Requirements for BalancedBiaxially Oriented Polyethylene Terephthalate (PET) Films Used for Electrical Insulation FirstEdition

IEC 60674-3-3 Specification for Plastic Films for Electrical


Purposes Part 3: Specifications for IndividualMaterials Sheet 3: Requirements for Polycarbonate (PC) Films Used for Electrical Insulation FirstEdition

IEC 60674-3-4 TO 6 Specification for Plastic Films for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheets 4 to 6: Requirements for PolyimideFilms Used for Electrical Insulation First Edition

IEC 60674-3-7 Specification for Plastic Films for ElectricalPurposes Part 3: Specifications for IndividualMaterials Sheet 7: Requirements for Fluoroethylene-Propylene (FEP) Films Used for ElectricalInsulation First Edition

IEC 60675 Household Electric Direct-Acting Room Heaters - Methods for Measuring Performance SecondEdition; CENELEC EN 60675: 1995

IEC 60676 Test Methods for Direct Arc Furnaces First Edition IEC 60677 Block Transfers in CAMAC Systems First Edition IEC 60678 Definitions of CAMAC Terms Used in IEC Publications

First Edition IEC 60679-1 Quartz Crystal Controlled Oscillators of Assessed

Quality - Part 1: Generic Specification SecondEdition; QC 690000

IEC 60679-2 Quartz Crystal Controlled Oscillators Part 2: Guideto the Use of Quartz Crystal Controlled OscillatorsFirst Edition

IEC 60679-3 Quartz Crystal Controlled Oscillators Part 3: Standard Outlines and Lead Connections FirstEdition; (Supplement A-1991) (Amendment 1-1994)

IEC 60679-4 Quartz Crystal Controlled Oscillators of AssessedQuality - Part 4: Sectional Specification - Capability Approval First Edition; QC 690100

IEC 60679-4-1 Quartz Crystal Controlled Oscillators of AssessedQuality - Part 4-1: Blank Detail Specification - Capability Approval First Edition; QC 690101

IEC 60679-5 Quartz Crystal Controlled Oscillators of AssessedQuality - Part 5: Sectional Specification - Qualification Approval First Edition

IEC 60679-5-1 Quartz Crystal Controlled Oscillators of AssessedQuality - Part 5-1: Blank Detail Specification - Qualification Approval First Edition; QC 690201

IEC 60680 Test Methods of Plasma Equipment for ElectroheatApplications First Edition

IEC 60681-1 Dimensions of Small Power Motors for DefinitePurpose Application Part 1: Oil Burner Motors FirstEdition

IEC 60682 Standard Method of Measuring the Pinch Temperatureof Quartz-Tungsten-Halogen Lamps First Edition; Amendment 1-1987; Amendment 2-1997

IEC 60683 Test Methods for Submerged-Arc Furnaces FirstEdition

IEC 60684-1 Specification for Flexible Insulating Sleeving Part1: Definitions and General Requirements FirstEdition; CENELEC EN 60 684-1: 1995

IEC 60684-2 Flexible Insulating Sleeving - Part 2: Methods ofTest Second Edition; Corrigendum- 1997

IEC 60684-3-100 TO 105 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 100 to 105: Extruded PVCSleeving First Edition

IEC 60684-3-116 TO 118 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 116 to 118: ExtrudedPolychloroprene, General Purpose First Edition


IEC 60684-3-121 AND 122 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 121 and 122: Extruded SiliconeSleeving First Edition

IEC 60684-3-123 AND 124 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 123 and 124: Extruded SiliconeSleeving, General Purpose First Edition

IEC 60684-3-136 Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheet 136: Extruded Fluorosilicone Sleeving - General Purpose First Edition

IEC 60684-3-151 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 151: Extruded PVC/Nitrile Rubber - GeneralPurpose First Edition

IEC 60684-3-201 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheet 201: Heat Shrinkable Sleeving, General Purpose, Flexible, Cross-Linked PVC, ShrinkRatio 2:1 First Edition

IEC 60684-3-209 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheet 209: Heat Shrinkable Sleeving, General Purpose, Flame Retarded Polyolefin ShrinkRatio 2:1 First Edition

IEC 60684-3-211 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheet 211: Heat-Shrinkable Sleeving, General Purpose, Semi-Rigid Polyolefin, ShrinkRatio 2:1 First Edition

IEC 60684-3-212 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 212: Heat-Shrinkable Polyolefin Sleeving, Flame Retarded, Shrink Ratio 2:1 First Edition

IEC 60684-3-217 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 217: Heat-Shrinkable Polyolefin Sleeving, Flame Retarded, Shrink Ratio 3:1 First Edition

IEC 60684-3-228 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 228: Heat-Shrinkable Semi-Rigid, Polyvinylidene Fluoride Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1 First Edition

IEC 60684-3-240 TO 243 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 240 to 243: Heat-Shrinkable PTFESleeving First Edition

IEC 60684-3-246 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheet 246: Heat-Shrinkable Sleeving, Dual-Wall, Not Flame-Retarded, Polyolefin FirstEdition

IEC 60684-3-271 Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 271: Heat-Shrinkable Elastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1First Edition

IEC 60684-3-300 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheet 300: Glass Textile FibreSleeving, Braided, Uncoated First Edition

IEC 60684-3-320 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheet 320: Polyethylene Terephthalate


Textile, Lightly Impregnated First Edition IEC 60684-3-340 TO 342 Specification for Flexible Insulating Sleeving Part

3: Specification Requirements for Individual Typesof Sleeving Sheet 340 to 342: Expandable BraidedPolyethylene Terephthalate Textile Sleeving FirstEdition; CENELEC 60684-3-340 to 342: 1994

IEC 60684-3-343 TO 345 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 343 to 345: Expandable BraidedEthylene Chlorotrifluoroethylene (E-CTFE) TextileSleeving, Uncoated First Edition; CENELEC EN60684-3-343 to 345: 1994

IEC 60684-3-400 TO 402 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 400 to 402: Glass TextileSleeving with Silicone Elastomer Coating FirstEdition

IEC 60684-3-403 TO 405 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 403 to 405: Glass TextileSleeving with Acrylic Based Coating First Edition

IEC 60684-3-406 TO 408 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 406 to 408: Glass TextileSleeving with PVC Based Coating First Edition

IEC 60684-3-420 TO 422 Specification for Flexible Insulating Sleeving Part3: Specification Requirements for Individual Typesof Sleeving Sheets 420 to 422: PolyethyleneTerephthalate Textile with Acrylic Based CoatingFirst Edition

IEC 60685-2-1 Connecting Devices (Junction and/or Tapping) forHousehold and Similar Fixed ElectricalInstallations Part 2: Particular Requirements - Screwless Terminals for Connecting CopperConductors without Special Preparation FirstEdition

IEC 60685-2-3 Connecting Devices (Junction and/or Tapping) forHousehold and Similar Fixed ElectricalInstallations Part 2: Particular Requirements - Insulation Piercing Connecting Devices forInsulated Copper Conductors First Edition

IEC 60686 Stabilized Power Supplies, A.C. Output FirstEdition

IEC 60687 Alternating Current Static Watt-Hour Meters forActive Energy (Classes 0,2 S and 0,5 S) SecondEdition; (CENELEC EN 60687:1992)

IEC 60688 Electrical Measuring Transducers for ConvertingA.C.Electrical Quantities to Analogue or DigitalSignals Second Edition

IEC 60689 Measurements and Test Methods for 32 kHz QuartzCrystal Units for Wrist Watches and Standard ValuesFirst Edition

IEC 60691 Thermal-Links - Requirements and Application GuideSecond Edition; (Amendment 1-1995) (CAN/CSA-IECE691-94) (CENELEC EN 60691: 1995)

IEC 60692 Density Meters Utilizing Ionizing RadiationDefinitions and Test Methods First Edition

IEC 60694 Common Specifications For High-Voltage Switchgearand Controlgear Standards Second Edition; Supersedes IEC 1208: 1992

IEC 60695-1-1 Fire Hazard Testing Part 1: Guidance for AssessingFire Hazard of Electrotechnical Products - Section1: General Guidance Second Edition; (CENELEC EN60695-1-1: 1995) (Corrigendum-1996)

IEC 60695-1-2 Fire Hazard Testing Part 1: Guidance for the


Preparation of Requirements and Test Specificationsfor Assessing Fire Hazard of ElectrotechnicalProducts Guidance for Electronic Components FirstEdition

IEC 60695-1-3 Fire Hazard Testing Part 1: Guidance for thePreparation of Requirements and Test Specificationsfor Assessing Fire Hazard of ElectrotechnicalProducts Guidance for Use of PreselectionProcedures First Edition

IEC 60695-2-1/0 Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 0: Glow-Wire Test Methods - General First Edition; AS/NZS 4695.2.10: 1996

IEC 60695-2-1/1 Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 1: Glow-Wire End-Product Test andGuidance First Edition; Corrigendum-1995; AS/NZS4695.2.11: 1996

IEC 60695-2-1/2 Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 2: Glow-Wire Flammability Test onMaterials First Edition; AS/NZS 4695.2.12: 1996; CENELEC EN 60 695-2-1/2: 1996

IEC 60695-2-1/3 Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 3: Glow-Wire Ignitability Test onMaterials First Edition; AS/NZS 4695.2.13: 1996; CENELEC EN 60695-2-1/3: 1996

IEC 60695-2-2 Fire Hazard Testing Part 2: Test Methods Section 2 - Needle-Flame Test Second Edition; CENELEC HD444.2.2 S2: 1992; Amendment 1-1994; CENELEC EN60695-2-2 prA1: 1995; AS/NZS 4695.2.2: 1996; CENELEC EN 60695- 2-2: 1994

IEC 60695-2-3 Fire Hazard Testing Part 2: Test Methods Bad-Connection Test with Heaters First Edition

IEC 60695-2-4/0 Fire Hazard Testing Part 2: Test Methods - Section4/Sheet 0: Diffusion Type and Premixed Type FlameTest Methods First Edition; (CENELEC EN60695-2-4/0 :1993) (AS/NZS 4695.2.40: 1996)

IEC 60695-2-4/1 Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 1: 1 kW Nominal Pre-Mixed Test Flame andGuidance First Edition; Amendment 1-1994; CENELECEN 60695-2-4/1: 1993; AS/NZS 4695.2.41: 1996

IEC 60695-2-4/2 Fire Hazard Testing - Part 2: Test Methods - Section 4/Sheet 2: 500 W Nominal Test Flames andGuidance First Edition; CENELEC EN 60695-2-4/2: 1995

IEC 60695-2-20 Fire Hazard Testing - Part 2: Glowing/Hot WireBased Test Methods - Section 20: Hot-Wire CoilIgnitability Test on Materials First Edition

IEC 60695-3-1 Fire Hazard Testing Part 3: Examples of Fire HazardAssessment Procedures and Interpretation of ResultsCombustion Characteristics and Survey of TestMethods for Their Determination First Edition

IEC 60695-4 Fire Hazard Testing - Part 4: TerminologyConcerning Fire Tests Second Edition; AS/NZS4695.4: 1996; CENELEC EN 60695-4: 1995

IEC 60695-5-1 Fire Hazard Testing Part 5: Assessment of PotentialCorrosion Damage by Fire Effluent - Section 1: General Guidance First Edition; CENELEC EN60695-5-1: 1993; AS/NZS 4695.5.1: 1996

IEC 60695-5-2 Fire Hazard Testing - Part 5: Assessment ofPotential Corrosion Damage by Fire Effluent - Section 2: Guidance on the Selection and Use ofTest Methods First Edition

IEC 60695-6-30 Fire Hazard Testing - Part 6: Guidance and TestMethods on the Assessment of Obscuration Hazard ofVision Caused by Smoke Opacity fromElectrotechnical Products Involved in Fires


- Section 30: Small Scale Static Method - Determination of Smoke Opacity - Description ofthe Apparatus First Edition

IEC 60695-7-1 Fire Hazard Testing - Part 7: Guidance on theMinimization of Toxic Hazards Due to FiresInvolving Electrotechnical Products - Section 1: General (AS/NZS 4695.7.1:1996) (First Edition; CENELEC EN 60 695-7-1: 1995; AS/NZS 4695.7.1: 1996

IEC TR 60695-7-4 Fire Hazard Testing - Part 7: Guidance on theMinimization of Toxic Hazards Due to FiresInvolving Electrotechnical Products - Section 4: Unusual Toxic Effects in Fires First Edition

IEC 60695-10-2 Fire Hazard Testing - Part 10: Guidance and TestMethods for the Minimization of the Effects ofAbnormal Heat on Electrotechnical Products Involvedin Fires - Section 2: Method for Testing ProductsMade from Non-Metallic Materials for Resistance toHeat Using the Ball Pressure Test First Edition

IEC 60696 Indirectly Heated Thermistors with NegativeTemperature Coefficient (NTC-I) First Edition

IEC 60699 Test Method for the Evaluation of Bond Strength ofImpregnating Varnishes by the Wire Bundle TestFirst Edition; Replaced by IEC 1033: 1991

IEC 60700 Testing of Semiconductor Valves for High-VoltageD.C. Power Transmission First Edition

IEC 60701 Axial Lead Cores Made of Magnetic Oxides or IronPowder First Edition

IEC 60702-1 Mineral Insulated Cables and Their Terminationswith a Rated Voltage Not Exceeding 750 V Part 1: Cables Second Edition; (Amendment 1-1992)

IEC 60702-2 Mineral Insulated Cables and Their Terminationswith a Rated Voltage Not Exceeding 750 V Part 2: Terminations First Edition

IEC 60703 Test Methods for Electroheating Installations withElectron Guns First Edition

IEC 60704-1 Household and Similar Electrical Appliances - TestCode for the Determination of Airborne AcousticalNoise - Part 1: General Requirements Second Edition

IEC 60704-2-1 Test Code for the Determination of AirborneAcoustical Noise Emitted by Household and SimilarElectrical Appliances Part 2: ParticularRequirements for Vacuum Cleaners First Edition; CENELEC EN 60704-2-1: 1994

IEC 60704-2-2 Test Code for the Determination of AirborneAcoustical Noise Emitted by Household and SimilarElectrical Appliances Part 2: ParticularRequirements for Forced Draught Convection HeatersFirst Edition; CENELEC EN 60704-2-2: 1994

IEC 60704-2-3 Test Code for the Determination of AirborneAcoustical Noise Emitted by Household and SimilarElectrical Appliances Part 2: ParticularRequirements for Dishwashers First Edition; Corrigendum-12/1989; CENELEC EN 60704-2-3: 1994

IEC 60704-2-4 Test Code for the Determination of AirborneAcoustical Noise Emitted by Household and SimilarElectrical Appliances Part 2: ParticularRequirements for Washing Machines and SpinExtractors First Edition; CENELEC EN 60704-2-4: 1994

IEC 60704-2-5 Test Code for the Determination of AirborneAcoustical Noise Emitted by Household and SimilarElectrical Appliances Part 2: ParticularRequirements for Room Heaters of the Storage TypeFirst Edition; CENELEC EN 60704-2-5: 1994

IEC 60704-2-6 Test Code for the Determination of Airborne


Acoustical Noise Emitted by Household and SimilarElectrical Appliances Part 2: ParticularRequirements for Tumble-Dryers First Edition; CENELEC EN 60704-2-6: 1995

IEC 60704-2-7 Household and Similar Electrical Appliances - TestCode for the Determination of Airborne AcousticalNoise - Part 2: Particular Requirements for FansFirst Edition

IEC 60704-2-8 Household and Similar Electrical Appliances - TestCode for the Determination of Airborne AcousticalNoise - Part 2: Particular Requirements forElectric Shavers First Edition

IEC 60704-3 Test Code for the Determination of AirborneAcoustical Noise Emitted by Household and SimilarElectrical Appliances Part 3: Procedure forDetermining and Verifying Declared Noise EmissionValues First Edition; CENELEC EN 60704-3: 1994

IEC 60705 Methods for Measuring the Performance of MicrowaveOvens for Household and Similar Purposes SecondEdition; (Amendment 1-1993) (Amendment 2-1993) (CENELEC EN 60705: 1995)

IEC 60706-1 Guide on Maintainability of Equipment Part 1: Sections One, Two and Three Introduction, Requirements and Maintainability Programme FirstEdition

IEC 60706-2 Guide on Maintainability of Equipment Part 2: Section Five - Maintainability Studies During theDesign Phase First Edition

IEC 60706-3 Guide on Maintainability of Equipment Part 3: Sections Six and Seven Verification andCollection, Analysis and Presentation of Data FirstEdition

IEC 60706-4 Guide on Maintainability of Equipment Part 4: Section 8 - Maintenance and Maintenance SupportPlanning First Edition

IEC 60706-5 Guide on Maintainability of Equipment - Part 5: Section 4: Diagnostic Testing First Edition

IEC 60706-6 Guide on Maintainability of Equipment - Part 6: Section 9: Statistical Methods in MaintainabilityEvaluation First Edition

IEC 60707 Methods of Test for the Determination of theFlammability of Solid Electrical InsulatingMaterials When Exposed to an Igniting Source FirstEdition; Amendment 1-1992; AS/NZS 4695.707: 1996

IEC 60708-1 Low-Frequency Cables with Polyolefin Insulation andMoisture Barrier Polyolefin Sheath Part 1: GeneralDesign Details and Requirements First Edition; Amendment 3-1988, Contains Amendments 1 and 2

IEC 60708-2 Low-Frequency Cables with Polyolefin Insulation andMoisture Barrier Polyolefin Sheath Part 2: UnitType, Filled, Moisture Barrier PolyethyleneSheathed Cables with Copper Conductors and Solid orCellular Insulation First Edition; (Amendment1-1983)

IEC 60708-3 Low-Frequency Cables with Polyolefin Insulation andMoisture Barrier Polyolefin Sheath Part 3: UnitType, Unfilled, Moisture Barrier PolyethyleneSheathed Cables with Copper Conductors and Solid orCellular Insulation First Edition; (Amendment1-1983)

IEC 60708-4 Low-Frequency Cables with Polyolefin Insulation andMoisture Barrier Polyethylene Sheath Part 4: UnitType, Unfilled, Moisture Barrier PolyethyleneSheathed Cables with Copper Conductors, SolidInsulation and Integral Suspension Strand First


Edition; Amendment 1-1983 IEC 60709 Separation within the Reactor Protection System

First Edition IEC 60710 Radiation Protection Equipment for the Measuring

and Monitoring of Airborne Tritium First Edition IEC 60711 Occluded-Ear Simulator for the Measurement of

Earphones Coupled to the Ear by Ear Inserts FirstEdition

IEC 60712 Helical-Scan Video-Tape Cassette System Using 19mm (3/4 in) Magnetic Tape, Known as U-Format SecondEdition; (Amendment 1-1993) (CENELEC EN 60712: 1994)

IEC 60713 Subroutines for CAMAC First Edition IEC 60714 Expression of the Properties of Spectrum Analyzers

First Edition IEC 60715 Dimensions of Low-Voltage Switchgear and

Controlgear Standardized Mounting on Rails forMechanical Support of Electrical Devices inSwitchgear and Controlgear Installations FirstEdition; (Amendment 1-1995)

IEC 60716 Expression of the Properties of Signal GeneratorsFirst Edition

IEC 60717 Method for the Determination of the Space Requiredby Capacitors and Resistors with UnidirectionalTerminations First Edition

IEC 60718 Electrical Equipment for the Supply of Energy toBattery-Powered Road Vehicles Third Edition

IEC 60719 Calculation of the Lower and Upper Limits for theAverage Outer Dimensions of Cables with CircularCopper Conductors and of Rated Voltages up to andIncluding 450/750 V Second Edition; CENELEC EN60719: 1993

IEC 60720 Characteristics of Line Post Insulators FirstEdition

IEC 60721-1 Classification of Environmental Conditions Part 1: Environmental Parameters and Their SeveritiesSecond Edition; Amendment 1-1992; CENELEC HD 478.1S2: 1994; Amendment 2-1995; CENELEC EN 60721-1: 1995

IEC 60721-2-1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in NatureTemperature and Humidity First Edition; (Amendment1-1987)

IEC 60721-2-2 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in NaturePrecipitation and Wind First Edition

IEC 60721-2-3 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature AirPressure First Edition

IEC 60721-2-4 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature SolarRadiation and Temperature First Edition; (Amendment1-1988)

IEC 60721-2-5 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in NatureSection 5: Dust, Sand, Salt Mist First Edition

IEC 60721-2-6 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Earthquake Vibration and Shock First Edition; CENELEC HD 478.2.6 S1: 1992

IEC 60721-2-7 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Faunaand Flora First Edition

IEC 60721-2-8 Classification of Environmental Conditions - Part


2: Environmental Conditions Appearing in Nature - Section 8: Fire Exposure First Edition

IEC 60721-3-0 Classification of Environmental Conditions Part 3: Classification of Groups of EnvironmentalParameters and Their Severities Introduction FirstEdition; (Corrigendum-Dec 1985) (Amendment 1-1987) (CENELEC EN 60721-3-0: 1993)

IEC 60721-3-1 Classification of Environmental Conditions - Part3: Classification of Groups of EnvironmentalParameters and Their Severities - Section 1: Storage Second Edition

IEC 60721-3-2 Classification of Environmental Conditions - Part3: Classification of Groups of EnvironmentalParameters and Their Severities - Section 2: Transportation Second Edition

IEC 60721-3-3 Classification of Environmental Conditions - Part3: Classification of Groups of EnvironmentalParameters and Their Severities - Section 3: Stationary Use at Weatherprotected Locations SecondEdition; (Amendment 1-1995) (Amendment 2-1996)

IEC 60721-3-4 Classification of Environmental Conditions - Part3: Classification of Groups of EnvironmentalParameters and Their Severities - Section 4: Stationary Use at Non-Weatherprotected LocationsSecond Edition; CEN EN 60721-3-4: 1995; Amendment1-1996

IEC 60721-3-5 Classification of Environmental Conditions Part 3: Classification of Groups of EnvironmentalParameters and Their Severities - Section 5: GroundVehicle Installations Second Edition

IEC 60721-3-6 Classification of Environmental Conditions Part 3: Classification of Groups of EnvironmentalParameters and Their Severities Ship EnvironmentFirst Edition; (Corrigendum-1987) (Amendment1-1991) (CENELEC EN 60721-3-6: 1993) (Amendment2-1996)

IEC 60721-3-7 Classification of Environmental Conditions - Part3: Classification of Groups of EnvironmentalParameters and Their Severities - Section 7: Portable and Non-Stationary Use Second Edition; (CENELEC EN 60721-3-7: 1995) (Amendment 1-1996)

IEC 60721-3-9 Classification of Environmental Conditions Part 3: Classification of Groups of EnvironmentalParameters and Their Severities Section 9: Microclimates Inside Products First Edition; (CENELEC EN 60721-3-9: 1993) (Amendment 1-1994) (Corrigendum-1995)

IEC 60722 Guide to the Lightning Impulse and SwitchingImpulse Testing of Power Transformers and ReactorsFirst Edition

IEC 60723-1 Inductor and Transformer Cores forTelecommunications Part 1: Generic SpecificationFirst Edition; (IECQ QC 250000)

IEC 60723-2 Inductor and Transformer Cores forTelecommunications Part 2: SectionalSpecification: Magnetic Oxide Cores for InductorApplications First Edition; (Amendment 1-1989) (IECQ QC 250100)

IEC 60723-2-1 Detail Specification for Electronic Components; Ferrite Cores; Assessment Level: A First Edition; (IECQ QC 250101)

IEC 60723-3 Inductor and Transformer Cores forTelecommunications Part 3: SectionalSpecification: Magnetic Oxide Cores for Broad-BandTransformers First Edition; IECQ QC 250200


IEC 60723-3-1 Inductor and Transformer Cores forTelecommunications Part 3: Blank DetailSpecification: Magnetic Oxide Cores for Broad-BandTransformers Assessment Levels A and B FirstEdition; IECQ QC 250201/QC 250202

IEC 60723-4 Inductor and Transformer Cores forTelecommunications Part 4: SectionalSpecification: Magnetic Oxide Cores forTransformers and Chokes for Power ApplicationsFirst Edition; (IECQ QC 250300)

IEC 60723-4-1 Inductor and Transformer Cores forTelecommunications Part 4: Blank DetailSpecification: Magnetic Oxide Cores forTransformers and Chokes for Power ApplicationsAssessment Level A First Edition; (IECQ QC 250301)

IEC 60723-5 Inductor and Transformer Cores forTelecommunications Part 5: SectionalSpecification: Adjusters Used with Magnetic OxideCores for Use in Adjustable Inductors andTransformers First Edition; (IECQ QC 250400)

IEC 60723-5-1 Inductor and Transformer Cores forTelecommunications Part 5: SectionalSpecification: Adjusters Used with Magnetic OxideCores for Use in Adjustable Inductors andTransformers Section 1: Blank Detail Specification - Assessment Level A First Edition; IECQ QC 250401

IEC 60724 Guide to the Short-Circuit Temperature Limits ofElectric Cables with a Rated Voltage Not Exceeding0,6/1,0 kV Second Edition; Amendment 1-1993

IEC 60725 Considerations on Reference Impedances for Use inDetermining the Disturbance Characteristics ofHousehold Appliances and Similar ElectricalEquipment First Edition

IEC 60726 Dry-Type Power Transformers First Edition; (Amendment 1-1986)

IEC 60727-1 Evaluation of Electrical Endurance of ElectricalInsulation Systems Part 1: General Considerationsand Evaluation Procedures Based on NormalDistributions First Edition

IEC 60727-2 Evaluation of Electrical Endurance of ElectricalInsulation Systems Part 2: Evaluation ProceduresBased on Extreme-Value Distributions First Edition

IEC 60728-1 Cabled Distribution Systems Part 1: SystemsPrimarily Intended for Sound and Television SignalsOperating Between 30 MHz and 1 GHz Second Edition; (Corrigendum-1986) (Amendment 1-1992) (Amendment2-1995)

IEC 60728-3 Cabled Distribution Systems for Television andSound Signals - Part 3: Active Coaxial WidebandDistribution Equipment First Edition

IEC 60728-4 Cabled Distribution Systems for Television andSound Signals - Part 4: Passive Coaxial WidebandDistribution Equipment First Edition

IEC 60728-11 Cabled Distribution Systems for Television andSound Signals - Part 11: Safety First Edition

IEC 60729 Multiple Controllers in a CAMAC Crate First Edition IEC 60730-1 Automatic Electrical Controls for Household and

Similar Use Part 1: General Requirements SecondEdition Amendment 11-1994;CENELEC EN 60730-1: 1991; CAN/CSA-IEC E730-1-94; Amendment 2 02-1997

IEC 60730-2-1 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forElectrical Controls for Electrical HouseholdAppliances First Edition; CAN/CSA-IEC E730-2-1-94


IEC 60730-2-2 Automatic Electrical Controls for Household andSimilar Use; Part 2: Particular Requirements forThermal Motor Protectors First Edition; Amendment1-1995; Amendment 2-1997

IEC 60730-2-3 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forThermal Protectors for Ballasts for TubularFluorescent Lamps First Edition; Amendment 1-1995; CAN/CSA-IEC E730-2-3-94

IEC 60730-2-4 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forThermal Motor Protectors for Motor-Compressors ofHermetic and Semi-Hermetic Type First Edition; Amendment 1-1994; CENELEC EN 60730-2-4: 1993; CAN/CSA-IEC E730-2-4-94

IEC 60730-2-5 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forAutomatic Electrical Burner Control Systems SecondEdition; CAN/CSA-IEC E730-2-5-94; Amendment1-1996; Amendment 2-1997

IEC 60730-2-6 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forAutomatic Electrical Pressure Sensing ControlsIncluding Mechanical Requirements First Edition; Amendment 11-1994; CAN/CSA-IEC E730-2-6-94; Amendment 2-02/1997

IEC 60730-2-7 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forTimers and Time Switches First Edition; Amendment1-1994; CAN/CSA-IEC E730-2-7-94

IEC 60730-2-8 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forElectrically Operated Water Valves, IncludingMechanical Requirements First Edition; Amendment 111-1994; Amendment 2 05-1997

IEC 60730-2-9 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forTemperature Sensing Controls First Edition; Amendment 1-1994; Amendment 2-1994; CENELEC EN60730-2-9: 1995; CAN/CSA-IEC E730-2-9-94

IEC 60730-2-10 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forElectrically Operated Motor Starting Relays FirstEdition; Amendment 1-1994; CAN/CSA-IEC E730-2-10- 94; CENELEC EN 60 730-2-10: 1995

IEC 60730-2-11 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forEnergy Regulators Edition 1.2; Edition 1: 1993Consolidated with Amendments 1: 1994 and 2: 1997

IEC 60730-2-12 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forElectrically Operated Door Locks First Edition; CENELEC EN 60730-2-12: 1993; Amendment 1-1995; CAN/CSA-IEC E730-2-12-94

IEC 60730-2-13 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forHumidity Sensing Controls Edition 1.1; Edition 1: 1995 Consolidated with Amendment 1: 1997

IEC 60730-2-14 Automatic Electrical Controls for Household andSimilar Use Part 2: Particular Requirements forElectric Actuators First Edition

IEC 60730-2-15 Automatic Electrical Controls for Household andSimilar Use - Part 2: Particular Requirements forAutomatic Electrical Water Level Sensing Controlsof the Float or Electrode-Sensor Type Used in


Boiler Applications Edition 1.1; Edition 1: 1994Consolidated with Amendment 1: 1997

IEC 60730-2-16 Automatic Electrical Controls for Household andSimilar Use - Part 2: Particular Requirements forAutomatic Electrical Water Level Operating Controlsof the Float Type for Household and SimilarApplications Edition 1.1

IEC 60730-2-17 Automatic Electrical Controls for Household andSimilar Use - Part 2: Particular Requirements forElectrically Operated Gas Valves, IncludingMechanical Requirements First Edition

IEC 60730-2-18 Automatic Electrical Controls for Household andSimilar Use - Part 2: Particular Requirements forAutomatic Electrical Water and Air Flow SensingControls, Including Mechanical Requirements FirstEdition

IEC 60730-2-19 Automatic Electrical Controls for Household andSimilar Use - Part 2: Particular Requirements forElectrically Operated Oil Valves, IncludingMechanical Requirements First Edition

IEC 60731 Medical Electrical Equipment - Dosimeters withIonization Chambers as Used in Radiotherapy SecondEdition

IEC 60732 Measuring Methods for Cylinder Cores, Tube Coresand Screw Cores of Magnetic Oxides First Edition

IEC 60734 Hard Water to Be Used for Testing the Performanceof Some Household Electrical Appliances SecondEdition; CENELEC EN 60734: 1993

IEC 60735 Measuring Methods for Video Tape Properties SecondEdition

IEC 60736 Testing Equipment for Electrical Energy MetersFirst Edition

IEC 60737 In-Core Temperature or Primary Envelope TemperatureMeasurements in Nuclear Power ReactorsCharacteristics and Test Methods First Edition

IEC 60738-1 Directly Heated Positive Step-Function TemperatureCoefficient Thermistors Part I: GenericSpecification First Edition; (IECQ QC 440000)

IEC 60738-1-1 Directly Heated Positive Step Function TemperatureCoefficient Thermistors Part 1: Blank DetailSpecification Assessment Level E First Edition; (IECQ QC 440001)

IEC 60739 Digital Counting Ratemeters Characteristics andTest Methods First Edition

IEC 60740 Laminations for Transformers and Inductors for Usein Telecommunication and Electronic Equipment FirstEdition; (Amendment 1-1991)

IEC 60740-2 Laminations for Transformers and Inductors for Usein Telecommunication and Electronic Equipment Part2: Specification for the Minimum Permeabilities ofLaminations Made of Soft Magnetic MetallicMaterials First Edition

IEC 60741 Multichannel Amplitude Analyzers: Standards forTime-to-Amplitude Converters First Edition

IEC 60742 Isolating Transformers and Safety IsolatingTransformers - Requirements First Edition; (Amendment 1-1992) (CAN/CSA-IEC E742-94) (CENELECEN 60742: 1995)

IEC 60743 Terminology for Tools and Equipment to Be Used inLive Working First Edition; (Amendment 1-1995)

IEC 60744 Safety Logic Assemblies of Nuclear Power PlantsCharacteristics and Test Methods First Edition

IEC 60745-1 Safety of Hand-Held Motor-Operated Electric Tools - Part 1: General Requirements Second Edition


IEC 60745-2-1 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Drills FirstEdition; (Amendment 1-1992)

IEC 60745-2-2 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Screwdriversand Impact Wrenches First Edition; (Amendment1-1991)

IEC 60745-2-3 Safety of Hand-Held Motor-Operated Electric Tools - Part 2: Particular Requirements for Grinders, Polishers and Disk-Type Sanders First Edition; (Amendment 1-1995)

IEC 60745-2-4 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Sanders FirstEdition; (Amendment 1-1992) (Amendment 2-1995)

IEC 60745-2-5 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Circular Sawsand Circular Knives Second Edition

IEC 60745-2-6 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Hammers FirstEdition; Corrigendum-12/1989); Amendment 1-1992

IEC 60745-2-7 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Spray Guns forNon-Flammable Liquids First Edition

IEC 60745-2-8 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Sheet MetalShears First Edition; (Amendment 1-1992)

IEC 60745-2-9 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Tappers FirstEdition

IEC 60745-2-11 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for ReciprocatingSaws (Jig and Sabre Saws) First Edition

IEC 60745-2-12 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for ConcreteVibrators (Internal Vibrators) First Edition; (Amendment 1-1991)

IEC 60745-2-13 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Chain SawsFirst Edition; (Amendment 1-1992)

IEC 60745-2-14 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Planers FirstEdition

IEC 60745-2-15 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Hedge Trimmersand Grass Shears First Edition

IEC 60745-2-16 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Tackers FirstEdition

IEC 60745-2-17 Safety of Hand-Held Motor-Operated Electric ToolsPart 2: Particular Requirements for Routers andTrimmers First Edition

IEC 60746-1 Expression of Performance of ElectrochemicalAnalyzers Part 1: General First Edition

IEC 60746-2 Expression of Performance of ElectrochemicalAnalyzers Part 2: pH Value First Edition

IEC 60746-3 Expression of Performance of ElectrochemicalAnalyzers Part 3: Electrolytic Conductivity FirstEdition

IEC 60746-4 Expression of Performance of ElectrochemicalAnalyzers Part 4: Dissolved Oxygen in WaterMeasured by Membrane Covered Amperometric SensorsFirst Edition

IEC 60746-5 Expression of Performance of ElectrochemicalAnalyzers Part 5: Oxidation-Reduction Potential or


Redox Potential First Edition IEC 60747-1 Semiconductor Devices - Discrete Devices and

Integrated Circuits Part 1: General First Edition; Amendment 3-1996, Incorporating Amendment 1-1991and Amendment 2-1993

IEC 60747-2 Semiconductor Devices - Discrete Devices andIntegrated Circuits Part 2: Rectifier Diodes FirstEdition; Amendment 1-1992; Amendment 2-1993

IEC 60747-2-1 Semiconductor Devices Discrete Devices Part 2: Rectifier Diodes Section One - Blank DetailSpecification for Rectifier Diodes (IncludingAvalanche Rectifier Diodes), Ambient and Case-Rated, up to 100A First First; (IECQ QC 750108)

IEC 60747-2-2 Semiconductor Devices - Discrete Devices - Part 2: Rectifier Diodes - Section 2: Blank DetailSpecification for Rectifier Diodes (IncludingAvalanche Rectifier Diodes), Ambient and Case-Rated, for Currents Greater Than 100 A FirstEdition; IECQ QC 750109

IEC 60747-3 Semiconductor Devices - Discrete Devices Part 3: Signal (Including Switching) and Regulator DiodesFirst Edition; Amendment 1-1991; Amendment 2-1993

IEC 60747-3-1 Semiconductor Devices Discrete Devices Part 3: Signal (Including Switching) and Regulator DiodesSection One - Blank Detail Specification for SignalDiodes, Switching Diodes and Controlled-AvalancheDiodes First Edition; (IECQ QC 750101)

IEC 60747-3-2 Semiconductor Devices Discrete Devices Part 3: Signal (Including Switching) and Regulator DiodesSection Two - Blank Detail Specification forVoltage-Regulator Diodes and Voltage-ReferenceDiodes, Excluding Temperature-Compensated PrecisionReference Diodes First Edition

IEC 60747-4 Semiconductor Devices Discrete Devices Part 4: Microwave Diodes and Transistors First Edition; Amendment 1-1993

IEC 60747-5 Semiconductor Devices Discrete Devices andIntegrated Circuits Part 5: Optoelectronic DevicesSecond Edition; Amendment 1-1994; Amendment2-1995; Replaced Partially by IEC 60747-5-1: 1997and IEC 60747-5-3: 1997

IEC 60747-5-1 Discrete Semiconductor Devices and IntegratedCircuits - Part 5-1: Optoelectronic Devices - General First Edition; Patially Replaces IEC747-5: 1992

IEC 60747-5-2 Discrete Semiconductor Devices and IntegratedCircuits - Part 5-2: Optoelectronic Devices - Essential Ratings and Characteristics FirstEdition

IEC 60747-5-3 Discrete Semiconductor Devices and IntegratedCircuits - Part 5-3: Optoelectronic Devices - Measuring Methods First Edition; PatiallyReplaces IEC 747-5: 1992

IEC 60747-6 Semiconductor Devices Discrete Devices andIntegrated Circuits Part 6: Thyristors FirstEdition; Amendment 1-1991; Amendment 2-1994

IEC 60747-6-1 Semiconductor Devices Discrete Devices Part 6: Thyristors Section One - Blank Detail Specificationfor Reverse Blocking Triode Thyristors, Ambient andCase-Rated, up to 100 A First Edition; IECQ QC750110

IEC 60747-6-2 Semiconductor Devices Discrete Devices Part 6: Thyristors Section Two - Blank Detail Specificationfor Bidirectional Triode Thyristors (Triacs), Ambient or Case-Rated, up to 100 A First Edition;


IECQ QC 750111 IEC 60747-6-3 Semiconductor Devices Discrete Devices Part 6:

Thyristors Section Three - Blank DetailSpecification for Reverse Blocking TriodeThyristors, Ambient and Case-Rated, for CurrentsGreater Than 100 A First Edition; IECQ QC 750113

IEC 60747-7 Semiconductor Discrete Devices and IntegratedCircuits Part 7: Bipolar Transistors FirstEdition; Amendment 1-1991 Amendment 2-1994

IEC 60747-7-1 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section One - Blank DetailSpecification for Ambient-Rated Bipolar Transistorsfor Low and High-Frequency Amplification FirstEdition; IECQ QC 750102

IEC 60747-7-2 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Two - Blank DetailSpecification for Case-Rated Bipolar Transistorsfor Low-Frequency Amplification First Edition; IECQQC 750103

IEC 60747-7-3 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Three - Blank DetailSpecification for Bipolar Transistors for SwitchingApplications First Edition; IECQ QC 750104

IEC 60747-7-4 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Four - Blank DetailSpecification for Case-Rated Bipolar Transistorsfor High-Frequency Amplification First Edition; IECQ QC 750107

IEC 60747-8 Semiconductor Devices Discrete Devices Part 8: Field-Effect Transistors First Edition; Amendment1-1991; Amendment 2-1993

IEC 60747-8-1 Semiconductor Devices Discrete Devices Part 8: Field-Effect Transistors Section One - Blank DetailSpecification for Single-Gate Field-EffectTransistors, up to 5 W and 1 GHz First Edition; IECQ QC 750112

IEC 60747-8-2 Semiconductor Devices Discrete Devices Part 8: Field-Effect Transistors Section Two - Blank DetailSpecification for Field-Effect Transistors forCase-Rated Power Amplifier Applications FirstEdition; IECQ QC 750106

IEC 60747-8-3 Semiconductor Devices - Discrete Devices - Part 8: Field-Effect Transistors - Section 3: Blank DetailSpecification for Case- Rated Field-EffectTransistors for Switching Applications FirstEdition; (IECQ QC 750114) (Replaces 147 Series)

IEC 60747-10 Semiconductor Devices Part 10: GenericSpecification for Discrete Devices and IntegratedCircuits Second Edition; IECQ QC 700000; Amendment1-1995; Amendment 2-1996; Amendment 3-1996

IEC 60747-11 Semiconductor Devices Part 11: SectionalSpecification for Discrete Devices First Edition; Amendment 1-1991; IECQ QC 750100; Amendment 2-1996

IEC 60747-12 Semiconductor Devices Part 12: SectionalSpecification for Optoelectronic Devices FirstEdition; IECQ QC 720100

IEC 60747-12-1 Semiconductor Devices - Part 12: OptoelectronicDevices - Section 1: Blank Detail Specification forLight Emitting/Infrared Emitting Diodes with/without Pigtail for Fibre Optic Systems and Sub-Systems First Edition; IECQ QC 720101

IEC 60747-12-2 Semiconductor Devices - Part 12: OptoelectronicDevices - Section 2: Blank Detail Specification forLaser Diode Modules with Pigtail for Fibre OpticSystems and Sub-Systems First Edition; IECQ QC


720102 IEC 60747-12-3 Semiconductor Devices - Part 12-3: Optoelectronic

Devices - Blank Detail Specification for Light-Emitting Diodes - Display Application FirstEdition; QC 720103

IEC 60747-12-4 Semiconductor Devices - Part 12-4: OptoelectronicDevices - Blank Detail Specification for Pin-FETModules with/without Pigtail, for Fibre OpticSystems or Subsystems First Edition

IEC 60747-12-5 Semiconductor Devices - Part 12-5: OptoelectronicDevices - Blank Detail Specification for Pin-Photodiodes with/without Pigtail, for Fibre OpticSystems or Subsystems First Edition; IECQ QC 720105

IEC 60747-12-6 Semiconductors Devices - Part 12-6: OptoelectronicDevices - Blank Detail Specification for AvalanchePhotodiodes with/without Pigtail, for Fibre OpticSystems or Subsystems First Edition; QC 720106

IEC 60748-1 Semiconductor Devices - Integrated Circuits Part1: General First Edition; (Amendment 1-1991) (Amendment 2-1993) (Amendment 3-1995)

IEC 60748-2 Semiconductor Devices - Integrated Circuits - Part2: Digital Integrated Circuits Second Edition

IEC 60748-2-1 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section One - BlankDetail Specification for Bipolar Monolithic DigitalIntegrated Circuit Gates (Excluding UncommittedLogic Arrays) First Edition; (IECQ QC 790132)

IEC 60748-2-2 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Two - FamilySpecification for HCMOS Digital IntegratedCircuits, Series 54/74 HC, 54/74 HCT, 54/74 HCUFirst Edition; (Amendment 1-1994) (IECQ QC 790109)

IEC 60748-2-3 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Three - BlankDetail Specification for HCMOS Digital IntegratedCircuits (Series 54/74 HC, 54/74 HCT, 54/74 HCU) First Edition; (IECQ QC 790130)

IEC 60748-2-4 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Four - FamilySpecification for Complementary MOS DigitalIntegrated Circuits, Series 4 000 B and 4 000 UBFirst Edition; (IECQ QC 790104)

IEC 60748-2-5 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Five - BlankDetail Specification for Complementary MOS DigitalIntegrated Circuits (Series 4 000 B and 4 000 UB) First Edition; (IECQ QC 790131)

IEC 60748-2-6 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Six - BlankDetail Specification for Microprocessor IntegratedCircuits First Edition; (IECQ QC 790110)

IEC 60748-2-7 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Seven - BlankDetail Specification for Integrated CircuitFusible-Link Programmable Bipolar Read-OnlyMemories First Edition; (IECQ QC 790105)

IEC 60748-2-8 Semiconductor Devices Integrated Circuits - Part2: Digital Integrated Circuits - Section Eight - Blank Detail Specification for Integrated CircuitStatic Read/Write Memories First Edition; (IECQ QC790111)

IEC 60748-2-9 Semiconductor Devices - Integrated Circuits - Part2: Digital Integrated Circuits - Section 9: BlankDetail Specification for MOS Ultraviolet LightErasable Electrically Programmable Read-Only


Memories First Edition; (IECQ QC 790106) IEC 60748-2-10 Semiconductor Devices - Integrated Circuits - Part

2: Digital Integrated Circuits - Section 10: BlankDetail Specification for Integrated Circuit DynamicRead/Write Memories First Edition; (IECQ QC 790107)

IEC 60748-3 Semiconductor Devices Integrated Circuits Part 3: Analogue Integrated Circuits First Edition; Amendment 1-1991; Amendment 2-1994; Corrigendum-06/1996

IEC 60748-3-1 Semiconductor Devices Integrated Circuits Part 3: Analogue Integrated Circuits Section One - BlankDetail Specification for Monolithic IntegratedOperational Amplifiers First Edition; (IECQ QC790202)

IEC 60748-4 Semiconductor Devices - Integrated Circuits - Part4: Interface Integrated Circuits Second Edition; IECQ QC 790300

IEC 60748-4-1 Semicondutor Devices - Integrated Circuits - Part4: Interface Integrated Circuits - Section 1: BlankDetail Specification for Linear Digital-to-AnalogueConverters (DAC) First Edition; (IECQ QC 790303)

IEC 60748-4-2 Semiconductor Devices - Integrated Circuits - Part4: Interface Integrated Circuits - Section 2: BlankDetail Specification for Linear Analogue-to-DigitalConverters (ADC) First Edition; IECQ QC 790304

IEC 60748-5 Semiconductor Devices - Integrated Circuits - Part5: Semicustom Integrated Circuits First Edition

IEC 60748-11 Semiconductor Devices Integrated Circuits Part 11: Sectional Specification for SemiconductorIntegrated Circuits Excluding Hybrid Circuits FirstEdition; (IECQ QC 790100) (Amendment 1-1995)

IEC 60748-11-1 Semiconductor Devices Integrated Circuits Part 11: Section 1: Internal Visual Examination forSemiconductor Integrated Circuits Excluding HybridCircuits First Edition

IEC 60748-20 Semiconductor Devices - Integrated Circuits - Part20: Generic Specification for Film IntegratedCircuits and Hybrid Film Integrated Circuits FirstEdition; (IECQ QC 760000) (Amendment 1-1995)

IEC 60748-20-1 Semiconductor Devices - Integrated Circuits - Part20: Generic Specification for Film IntegratedCircuits and Hybrid Film Integrated Circuits - Section 1: Requirements for Internal VisualExamination First Edition; (IECQ QC 763000)

IEC 60748-21 Semiconductor Devices - Integrated Circuits - Part21: Sectional Specification for Film IntegratedCircuits and Hybrid Film Intergrated Circuits onthe Basis of Qualification Approval ProceduresSecond Edition; IECQ QC 760100

IEC 60748-21-1 Semiconductor Devices - Integrated Circuits - Part21-1: Blank Detail Specification for FilmIntegrated Circuits and Hybrid Film IntegratedCircuits on the Basis of Qualification ApprovalProcedures Second Edition; IECQ QC 760101

IEC 60748-22 Semiconductor Devices - Integrated Circuits - Part22: Sectional Specification for Film IntegratedCircuits and Hybrid Film Integrated Circuits on theBasis of the Capability Approval Procedures SecondEdition; IECQ QC 760200

IEC 60748-22-1 Semiconductor Devices - Integrated Circuits - Part22-1: Blank Detail Specification for FilmIntegrated Circuits and Hybrid Film IntegratedCircuits on the Basis of the Capability ApprovalProcedures Second Edition; IECQ QC 760201

IEC 60749 Semiconductor Devices - Mechanical and Climatic


Test Methods Second Edition IEC 60750 Item Designation in Electrotechnology First

Edition; Replaced by IEC 1346-1: 1996 IEC 60751 Industrial Platinum Resistance Thermometer Sensors

First Edition; Amendment 1-1986; Amendment 2-1995; BS EN 60751: 1996

IEC 60752 Audio-Frequency Calibration Tape for TransverseTrack Recorders First Edition

IEC 60753 Aluminum Electrical Conductor Wires Used inPolyolefin Insulated Telecommunication Cables FirstEdition

IEC 60754-1 Test on Gases Evolved During Combustion ofMaterials from Cables - Part 1: Determination ofthe Amount of Halogen Acid Gas Second Edition

IEC 60754-2 Test on Gases Evolved During Combustion of ElectricCables; Part 2: Determination of Degree of Acidityof Gases Evolved During the Combustion of MaterialsTaken from Electric Cables by Measuring pH andConductivity First Edition; Amendment 1-1997

IEC 60755 General Requirements for Residual Current OperatedProtective Devices First Edition; (Amendment1-1988) (Amendment 2-1992)

IEC 60756 Non-Broadcast Video Tape Recorders - Time BaseStability Second Edition; CENELEC EN 60756: 1993

IEC 60757 Code for Designation of Colours First Edition IEC 60758 Synthetic Quartz Crystal - Specifications and Guide

to the Use Second Edition; Amendment 1 05-1997 IEC 60759 Standard Test Procedures for Semiconductor X-Ray

Energy Spectrometers First Edition; (Amendment1-1991)

IEC 60760 Flat, Quick-Connect Terminations Second Edition; (Amendment 1-1993)

IEC 60761-1 Equipment for Continuously Monitoring Radioactivityin Gaseous Effluents Part 1: General RequirementsFirst Edition

IEC 60761-2 Equipment for Continuously Monitoring Radioactivityin Gaseous Effluents Part 2: Specific Requirementsfor Aerosol Effluent Monitors First Edition

IEC 60761-3 Equipment for Continuously Monitoring Radioactivityin Gaseous Effluents Part 3: Specific Requirementsfor Noble Gas Effluent Monitors First Edition

IEC 60761-4 Equipment for Continuously Monitoring Radioactivityin Gaseous Effluents Part 4: Specific Requirementsfor Iodine Monitors First Edition

IEC 60761-5 Equipment for Continuously Monitoring Radioactivityin Gaseous Effluents Part 5: Specific Requirementsfor Tritium Effluent Monitors First Edition

IEC 60761-6 Equipment for Continuously Monitoring Radioactivityin Gaseous Effluents Part 6: Specific Requirementsfor Transuranic Aerosol Effluent Monitors FirstEdition

IEC 60762 Aluminium Alloy Electrical Conductor Wires Used inPolyolefin Insulated Telecommunication Cables FirstEdition; (Amendment 1-1985)

IEC 60763-1 Specification for Laminated Pressboard Part 1: Definitions, Classification and GeneralRequirements First Edition; CENELEC EN 60 763-1: 1996

IEC 60763-2 Specification for Laminated Pressboard Part 2: Methods of Test First Edition; CENELEC EN 60763-2: 1996

IEC 60763-3-1 Specification for Laminated Pressboard Part 3: Specifications for Individual Materials Sheet 1: Specifications for Laminated Precompressed Board


Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2 FirstEdition; CENELEC EN 60 763-3-1: 1996

IEC 60766 Helical-Scan Video-Recording Cartridge and Reel-to-Reel System (EIAJ-Type 1) Using 12.70 mm (0.5 in) Magnetic Tape First Edition

IEC 60767 Helical-Scan Video Tape Cassette System Using 12.65mm (0.5 in) Magnetic Tape on Type Beta Format FirstEdition

IEC 60768 Process Stream Radiation Monitoring Equipment inLight Water Nuclear Reactors for Normal Operatingand Incident Conditions First Edition

IEC 60769 Ionizing Radiation Measurement Systems withAnalogue or Digital Signal Processing for ThicknessMeasurements First Edition

IEC 60770 Methods of Evaluating the Performance ofTransmitters for Use in Industrial-Process ControlSystems First Edition

IEC 60770-2 Transmitters for Use in Industrial-Process ControlSystems Part 2: Guidance for Inspection and RoutineTesting First Edition

IEC 60771 Calculation of Maximum Overall Diameter of Cablesand Specification of Minimum Tensile Strength ofSuspension Strand for Low-Frequency Cables withPolyolefin Insulation and Moisture BarrierPolyolefin Sheath First Edition

IEC 60772 Electrical Penetration Assemblies in ContainmentStructures for Nuclear Power Generating StationsFirst Edition

IEC 60773 Test Methods and Apparatus for the Measurement ofthe Operational Characteristics of Brushes FirstEdition

IEC 60774-1 Helical-Scan Video Tape Cassette System Using 12,65mm (0,5 in) Magnetic Tape on Type VHS Part 1: VHSand Compact VHS Video Cassette System FirstEdition; (CENELEC EN 60774-1: 1994)

IEC 60774-3 Helical-Scan Video Tape Cassette System Using 12,65mm (0,5 in) Magnetic Tape on Type VHS Part 3: S-VHSSecond Edition; (CENELEC EN 60774-3: 1993)

IEC 60775 Real-Time BASIC for CAMAC First Edition IEC 60776 Expression of the Properties of Logic Analyzers

First Edition IEC 60777 Terminology, Quantities and Units Concerning

Radiation Protection First Edition IEC 60778 Brush-Holders for Slip-Rings Group R - Type RA

First Edition IEC 60779 Test Methods for Electro-Slag Remelting Furnaces

First Edition IEC 60780 Qualification of Electrical Items of the Safety

System for Nuclear Power Generating Stations FirstEdition; (Amendment 1-1991)

IEC 60781 Application Guide for Calculation of Short-CircuitCurrents in Low-Voltage Radial Systems FirstEdition

IEC 60782 Measurements of Ultrasonic MagnetostrictiveTransducers First Edition

IEC 60783 Wiring and Connectors for Electric Road VehiclesFirst Edition

IEC 60784 Instrumentation for Electric Road Vehicles FirstEdition

IEC 60785 Rotating Machines for Electric Road Vehicles FirstEdition

IEC 60786 Controllers for Electric Road Vehicles FirstEdition

IEC 60787 Application Guide for the Selection of Fuse-Links


of High-Voltage Fuses for Transformer CircuitApplications First Edition; Amendment 1-1985

IEC 60788 Medical Radiology - Terminology First Edition IEC 60789 Characteristics and Test Conditions of Radionuclide

Imaging Devices; Anger Type Gamma Cameras SecondEdition; CENELEC EN 60789:1993; AS/NZS 4378: 1996

IEC 60790 Oscilloscopes and Peak Voltmeters for Impulse TestsFirst Edition

IEC 60791 Performance Evaluation of Insulation Systems Basedon Service Experience and Functional Tests FirstEdition

IEC 60792-1 Multi-Factor Functional Testing of ElectricalInsulation Systems Part 1: Test Procedures FirstEdition

IEC 60792-2 Multi-Factor Functional Testing of ElectricalInsulation Systems Part 2: Bibliography FirstEdition

IEC 60793-1 Optical Fibres Part 1: Generic Specification FourthEdition

IEC 60793-1-1 Optical Fibres Part 1: Generic Specification - Section 1: General First Edition

IEC 60793-1-2 Optical Fibres - Part 1: Generic Specification - Section 2: Measuring Methods for Dimensions FirstEdition; Amendment 1-1996

IEC 60793-1-3 Optical Fibres - Part 1: Generic Specification - Section 3: Measuring Methods for MechanicalCharacteristics First Edition; Amendment 1-1996; Amendment 2-1998

IEC 60793-1-4 Optical Fibres - Part 1: Generic Specification - Section 4: Measuring Methods for Transmission andOptical Characteristics First Edition; Amendment1-1996; Amendment 2-1998

IEC 60793-1-5 Optical Fibres - Part 1: Generic Specification - Section 5: Measuring Methods for EnvironmentalCharacteristics First Edition

IEC 60793-2 Optical Fibres Part 2: Product Specifications ThirdEdition; Amendment 1-1995; Amendment 2-1997

IEC 60794-1 Optical Fibre Cables - Part 1: GenericSpecification Fourth Edition

IEC 60794-2 Optical Fibre Cables Part 2: Product SpecificationsSecond Edition; Amendment 1-1998

IEC 60794-3 Optical Fibre Cables - Part 3: Duct, Buried andAerial Cables - Sectional Specification SecondEdition

IEC 60795 Test Method for Evaluating Thermal Endurance ofFlexible Sheet Materials Using the Wrapped TubeMethod First Edition

IEC 60796-1 Microprocessor System BUS - 8-Bit and 16-Bit Data (MULTIBUS 1) Part 1: Functional Description withElectrical and Timing Specifications First Edition

IEC 60796-2 Microprocessor System BUS - 8-Bit and 16-Bit Data (MULTIBUS 1) Part 2: Mechanical and PinDescriptions for the System Bus Configuration, withEdge Connectors (Direct) First Edition

IEC 60796-3 Microprocessor System BUS I, 8-Bit and 16-Bit DataPart 3: Mechanical and Pin Descriptions for theEurocard Configuration with Pin and Socket (Indirect) Connectors First Edition

IEC 60797 Residual Strength of String Insulator Units ofGlass or Ceramic Material for Overhead Lines AfterMechanical Damage of the Dielectric First Edition

IEC 60798 Copper Alloy Used for Equipment Wires First Edition IEC 60799 Cord Sets First Edition; Amendment 1-1993;

Amendment 2-1995; CENELEC EN 60799: 1987, Includes


AMD A1: 1994 IEC 60800 Heating Cables with a Rated Voltage of 300/500 V

for Comfort Heating and Prevention of Ice FormationSecond Edition

IEC 60801-1 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 1: General Introduction First Edition

IEC 60801-2 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge Requirements SecondEdition; CENELEC EN 60801-2: 1993; Withdrawn; Replaced by IEC 1000-4-2: 1995

IEC 60801-3 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 3: Radiated Electromagnetic Field Requirements FirstEdition; Withdrawn; Replaced by 1000-4-3: 1995

IEC 60801-4 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 4: Electrical Fast Transient/Burst Requirements FirstEdition (Withdrawn) (Partially Replaced by1000-4-4: 1995)

IEC 60803 Recommended Dimensions for Hexagonal and SquareCrimping-Die Cavities, Indentors, Gauges, OuterConductor Crimp Sleeves and Centre Contact CrimpBarrels for R.F. Cables and Connectors FirstEdition; (Amendment 1-1995)

IEC 60804 Integrating-Averaging Sound Level Meters FirstEdition; (Amendment 1-1989) (Amendment 2-1993) (CENELEC EN 60804:1994)

IEC 60805 Guide for Commissioning, Operation and Maintenanceof Storage Pumps and of Pump- Turbines Operating asPumps First Edition

IEC 60806 Determination of the Maximum Symmetrical RadiationField from a Rotating Anode X-Ray Tube for MedicalDiagnosis First Edition

IEC 60807-1 Rectangular Connectors for Frequencies Below 3 MHzPart 1: Generic Specification - GeneralRequirements and Guide for the Preparation ofDetail Specifications for Connectors with AssessedQuality Second Edition; (IECQ QC 030000)

IEC 60807-2 Rectangular Connectors for Frequencies Below 3 MHz - Part 2: Detail Specification for a Range ofConnectors, with Assessed Quality, with TrapezoidalShaped Metal Shells and Round Contacts - FixedSolder Contact Types Second Edition; (IECQ QC030000 XX 0001) (Amendment 1-1996)

IEC 60807-3 Rectangular Connectors for Frequencies Below 3 MHzPart 3: Detail Specification for a Range ofConnectors with Trapezoidal Shaped Metal Shells andRound Contacts - Removable Crimp Contact Types withClosed Crimp Barrels, Rear Insertion/RearExtraction First Edition

IEC 60807-6 Rectangular Connectors for Frequencies Below 3 MHzPart 6: Detail Specification for a Range ofRectangular Connectors with a Size 20 (7.5 A) RoundContacts Having Polarized Guides - Fixed SolderContact Types First Edition

IEC 60807-7 Rectangular Connectors for Frequencies Below 3 MHzPart 7: Detail Specification for a Range ofConnectors with Polarized Guides or Jackscrews andSize 16 (13 A) Round Contacts - Removable CrimpContact Types with Closed Crimp Barrels, RearInsertion/Front Release, with Assessed QualityFirst Edition; IECQ QC 030000 XX0002

IEC 60807-8 Rectangular Connectors for Frequencies Below 3 MHz


Part 8: Detail Specification for Connectors, Four-Signal Contacts and Earthing Contacts for CableScreen First Edition

IEC 60807-9 Rectangular Connectors for Frequencies Below 3 MHzPart 9: Detail Specification for a Range ofPeritelevision Connectors First Edition

IEC 60808 Complementary Instrumentation for CountingRatemeters Characteristics and Test Methods FirstEdition

IEC 60809 Filament Lamps for Road Vehicles - Dimensional, Electrical and Luminous Requirements SecondEdition; Amendment 1-1996; CENELEC EN 60809: 1995

IEC 60810 Lamps for Road Vehicles - Performance RequirementsSecond Edition; Amendment 1-1994; CENELEC EN60810:1994

IEC 60811-1-1 Common Test Methods for Insulating and SheathingMaterials of Electric Cables - Part 1: Methods forGeneral Application - Section 1: Measurement ofThickness and Overall Dimensions - Tests forDetermining the Mechanical Properties SecondEdition; CENELEC EN 60811-1-1: 1995

IEC 60811-1-2 Common Test Methods for Insulating and SheathingMaterials of Electric Cables Part 1: Methods forGeneral Application Section Two - Thermal AgeingMethods First Edition; Corrigendum-05/1986; Amendment 1-1989; CENELEC EN 60811-1-2: 1995

IEC 60811-1-3 Insulating and Sheathing Materials of ElectricCables - Common Test Methods - Part 1: GeneralApplication - Section 3: Methods for Determiningthe Density - Water Absorption Tests - ShrinkageTest Second Edition; CENELEC EN 60811-1-3: 1995

IEC 60811-1-4 Common Test Methods for Insulating and SheathingMaterials of Electric Cables Part 1: Methods forGeneral Application Section Four - Tests at LowTemperature First Edition; Corrigendum-05/1986Amendment 1-1993; CENELEC EN 60811-1-4: 1995

IEC 60811-2-1 Insulating and Sheathing Materials of Electric andOptical Cables - Common Test Methods - Part 2-1: Methods Specific to Elastomeric Compounds - OzoneResistance, Hot Set and Mineral Oil Immersion TestsSecond Edition

IEC 60811-3-1 Common Test Methods for Insulating and SheathingMaterials of Electric Cables Part 3: MethodsSpecific to PVC Compounds Section One - PressureTest At High Temperature - Tests for Resistance toCracking First Edition; Corrigendum-05/1986; Amendment 1-1994; CENELEC EN 60811-3-1: 1995

IEC 60811-3-2 Common Test Methods for Insulating and SheathingMaterials of Electric Cables Part 3: MethodsSpecific to PVC Compounds Section Two - Loss ofMass Test - Thermal Stability Test First Edition; Corrigendum-05/1986; Amendment 1-1993; CENELEC EN60811-3-2: 1995

IEC 60811-4-1 Common Test Methods for Insulating and SheathingMaterials of Electric Cables Part 4: MethodsSpecific to Polyethylene and PolypropyleneCompounds Section One - Resistance to EnvironmentalStress Cracking - Wrapping Test After ThermalAgeing in Air - Measurement of the Melt Flow Index - Carbon Black and/or Mineral Content Measurementin PE First Edition; Corrigendum-05/1986; Amendment2-1993, Includes Amendment 1

IEC 60811-4-2 Common Test Methods for Insulating and SheathingMaterials of Electric Cables Part 4: MethodsSpecific to Polyethylene and Polypropylene


Compounds Section Two - Elongation at Break AfterPre-Conditioning - Wrapping Test After Pre-Conditioning - Wrapping Test After Thermal Ageingin Air - Measurement of Mass Increase - Long-TermStability Test (Appendix A) - Test Method forCopper-Catalysed First Edition

IEC 60811-5-1 Common Test Methods for Insulating and SheathingMaterials of Electric Cables Part 5: MethodsSpecific to Filling Compounds Section One - Drop-Point - Separation of Oil - Lower TemperatureBrittleness - Total Acid Number - Absence ofCorrosive Components - Permittivity at 23 DegreesC - D.C. Resistivity at 23 Degrees C and 100Degrees C First Edition

IEC 60812 Analysis Techniques for System Reliability - Procedure for Failure Mode and Effects Analysis (FMEA) First Edition

IEC 60814 Insulating Liquids - Oil-Impregnated Paper andPressboard - Determination of Water by AutomaticCoulometric Karl Fischer Titration Second Edition

IEC 60815 Guide for the Selection of Insulators in Respect ofPolluted Conditions First Edition

IEC 60816 Guide on Methods of Measurement of Short DurationTransients on Low Voltage Power and Signal LinesFirst Edition

IEC 60817 Spring-Operated Impact-Test Apparatus and ItsCalibration First Edition

IEC 60819-1 Non-Cellulosic Papers for Electrical Purposes Part1: Definitions and General Requirements SecondEdition; (CENELEC EN 60819-1: 1995) (Amendment1-1996)

IEC 60819-3-3 Specification for Non- Cellulosic Papers forElectrical Purposes Part 3: Specifications forIndividual Materials Sheet 3: Unfilled Aramid (Aromatic Polyamide) Papers First Edition

IEC 60822 IEC 822 VSB Parallel Sub-System Bus of the IEC 821VME Bus First Edition

IEC 60823 Microprocessor System Bus (VMSbus) - Serial Sub-System Bus of the IEC 821 Bus (VMEbus) FirstEdition

IEC 60824 Terminology Related to Microprocessors FirstEdition

IEC 60825-1 Safety of Laser Products - Part 1: EquipmentClassification, Requirements and User's Guide FirstEdition; Corrigendum-1994; Supersedes IEC 820: 1986; Amendment 1 09 1997

IEC 60825-2 Safety of Laser Products Part 2: Safety of OpticalFibre Communication Systems First Edition; Amendment 1- 1997

IEC TR 60825-3 Safety of Laser Products - Part 3: Guidance forLaser Displays and Shows First Edition

IEC 60825-4 Safety of Laser Products - Part 4: Laser GuardsFirst Edition

IEC 60826 Loading and Strength of Overhead Transmission LinesSecond Edition; Corrigendum-09/1991

IEC 60827 Guide to Voltage Fluctuation Limits for HouseholdAppliances (Relating to IEC Publication 555-3) First Edition

IEC 60828 Pin Allocations for Microprocessor Systems Usingthe IEC 603-2 Connector First Edition

IEC 60829 Methods of Test for the Determination of theIgnitability of Solid Electrical InsulatingMaterials When Exposed to Electrically Heated WireSources First Edition; AS/NZS 4695.829: 1996


IEC 60830 Test Methods for Multichannel Analyzers asMultichannel Scalers First Edition

IEC 60831-1 Shunt Power Capacitors of the Self-Healing Type forA.C. Systems Having a Rated Voltage up to andIncluding 1 000 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guidefor Installation and Operation Second Edition; Amendment 1-1991; Amendment 2-1993; CENELEC EN60831-1: 1993

IEC 60831-2 Shunt Power Capacitors of the Self-Healing Type forA.C. Systems Having a Rated Voltage up to andIncluding 1 000 V Part 2: Ageing Test, Self-HealingTest and Destruction Test Second Edition; CENELECEN 60831-2: 1996

IEC 60832 Insulating Poles (Insulating Sticks) and UniversalTool Attachments (Fittings) for Live Working FirstEdition

IEC 60833 Measurement of Power-Frequency Electric FieldsFirst Edition

IEC 60834-1 Performance and Testing of Teleprotection Equipmentof Power Systems Part 1: Narrow-Band CommandSystems First Edition

IEC 60834-2 Performance and Testing of Teleprotection Equipmentof Power Systems - Part 2: Analogue ComparisonSystems First Edition; CENELEC HD 834-2:1993, Modified

IEC 60835-1-1 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part1: Measurements Common to Terrestrial Radio-RelaySystems and Satellite Earth Stations Section One - General First Edition; (CENELEC EN 60835-1-1: 1992)

IEC 60835-1-2 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part1: Measurements Common to Terrestrial Radio-RelaySystems and Satellite Earth Stations Section 2: Basic Characteristics First Edition; (Amendment1-1995)

IEC 60835-1-3 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part1: Measurements Common to Terrestrial Radio-RelaySystems and Satellite Earth Stations Section 3: Transmission Characteristics First Edition; (Amendment 1-1995)

IEC 60835-1-4 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part1: Measurements Common to Terrestrial Radio-RelaySystems and Satellite Earth Stations Section 4: Transmission Performance First Edition; (Amendment1-1995)

IEC 60835-2-1 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part2: Measurements on Terrestrial Radio-Relay SystemsSection One - General First Edition; (CENELEC EN60835-2-1: 1992)

IEC 60835-2-2 Methods of Measurement for Equipment Used inDigital Microwave Transmission Systems - Part 2: Measurements on Terrestrial Radio-Relay Systems - Section 2: Antenna First Edition

IEC 60835-2-3 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part2: Measurements on Terrestrial Radio-Relay SystemsSection 3: RF Branching Networks First Edition; CENELEC EN 60835-2-3: 1993

IEC 60835-2-4 Methods of Measurement for Equipment Used in


Digital Microwave Radio Transmission Systems Part2: Measurements on Terrestrial Radio-Relay SystemsSection 4: Transmitter/Receiver IncludingModulator/Demodulator First Edition; Amendment1-1997

IEC 60835-2-5 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part2: Measurements on Terrestrial Radio-Relay SystemsSection 5: Digital Signal Processing Sub-SystemFirst Edition; CENELEC EN 60835-2-5: 1995

IEC 60835-2-6 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part2: Measurements on Terrestrial Radio-Relay Systems - Section 6: Protection Switching First Edition; CENELEC EN 60835-2-6: 1995

IEC 60835-2-7 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmissions Systems Part2: Measurements on Terrestrial Radio-Relay SystemsSection 7: Diversity Switching and CombiningEquipment First Edition; CENELEC EN 60835-2-7: 1995

IEC 60835-2-8 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmissions Systems Part2: Measurements on Terrestrial Radio-Relay SystemsSection 8: Adaptive Equalizer First Edition; (CENELEC EN 60835-2-8: 1993) (Amendment 1-1996)

IEC 60835-2-9 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part2: Measurements on Terrestrial Radio-Relay Systems - Section 9: Service Channels First Edition

IEC 60835-2-10 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part2: Measurements on Terrestrial Radio-Relay SystemsSection Ten - Overall System Performance FirstEdition; (CENELEC EN 60835-2-10: 1993)

IEC 60835-2-11 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part2: Measurements on Terrestrial Radio-Relay Systems - Section 11: Cross-Polarization InterferenceCanceller First Edition

IEC 60835-3-1 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part3: Measurements on Satellite Earth Stations SectionOne - General First Edition; CENELEC EN 60835-3-1: 1992

IEC 60835-3-2 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part3: Measurements on Satellite Earth Stations Section2: Antenna First Edition; CENELEC EN 60835-3-2: 1996

IEC 60835-3-4 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part3: Measurements on Satellite Earth Stations Section4: Low Noise Amplifier First Edition

IEC 60835-3-5 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part3: Measurement on Satellite Earth Stations Section5 - Up- and Down-Converters First Edition

IEC 60835-3-6 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part3: Measurements on Satellite Earth Stations Section6: High-Power Amplifiers First Edition CENELEC EN60 835-3-6: 1996

IEC 60835-3-7 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part3: Measurement on Satellite Earth Stations


- Section 7: Figure-of-Merit of Receiving SystemFirst Edition; CENELEC EN 60835-3-7: 1995

IEC 60835-3-9 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part3: Measurement on Satellite Earth Stations Section9 - Terminal Equipment SCP-PSK First Edition; CENELEC EN 60835-3-9: 1995

IEC 60835-3-10 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part3: Measurements on Satellite Earth Stations - Section 10: Terminal Equipment - TDMA TrafficEarth Station First Edition

IEC 60835-3-11 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part3: Measurements on Satellite Earth Stations - Section 11: Service Channel Equipment for SCPC-PSK Transmission First Edition; CENELEC EN60835-3-11: 1995; BS EN 60835-3-11: 1996; BS 7573: SEC 3.11: 1996

IEC 60835-3-12 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems Part3: Measurements on Satellite Earth Stations Section12: Overall System Performance First Edition

IEC 60835-3-13 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part3: Measurements on Satellite Earth Stations - Section 13: VSAT Systems First Edition

IEC 60835-3-14 Methods of Measurement for Equipment Used inDigital Microwave Radio Transmission Systems - Part3: Measurements on Satellite Earth Stations - Section 14: Earth Stations for Satellite NewsGathering (SNG) First Edition

IEC 60836 Specifications for Silicone Liquids for ElectricalPurposes First Edition; CENELEC HD 565 S1: 1993; Corrigendum-12/1993

IEC 60838-1 Miscellaneous Lampholders - Part 1: GeneralRequirements and Tests Third Edition

IEC 60838-2-1 Miscellaneous Lampholders - Part 2: ParticularRequirements - Section 1: Lampholders S14 FirstEdition

IEC 60839-1-1 Alarm Systems Part 1: General Requirements SectionOne - General First Edition

IEC 60839-1-2 Alarm Systems Part 1: General Requirements SectionTwo - Power Units, Test Methods and PerformanceCriteria First Edition

IEC 60839-1-3 Alarm Systems Part 1: General Requirements SectionThree - Environmental Testing First Edition

IEC 60839-1-4 Alarm Systems Part 1: General Requirements SectionFour - Code of Practice First Edition

IEC 60839-2-2 Alarm Systems Part 2: Requirements for IntruderAlarm Systems Section Two - Requirements forDetectors - General First Edition

IEC 60839-2-3 Alarm Systems Part 2: Requirements for IntruderAlarm Systems Section Three - Requirements forInfrared-Beam Interruption Detectors in BuildingsFirst Edition

IEC 60839-2-4 Alarm Systems Part 2: Requirements for IntruderAlarm Systems Section 4 - Ultrasonic DopplerDetectors for Use in Buildings First Edition

IEC 60839-2-5 Alarm Systems Part 2: Requirements for IntruderAlarm Systems Section 5 - Microwave DopplerDetectors for Use in Buildings First Edition

IEC 60839-2-6 Alarm Systems Part 2: Requirements for IntruderAlarm Systems Section Six - Passive Infra-Red


Detectors for Use in Buildings First Edition IEC 60839-2-7 Alarm Systems - Part 2: Requirements for Intruder

Alarm Systems - Section 7: Passive Glass-BreakDetectors for Use in Buildings First Edition

IEC 60839-5-1 Alarm Systems Part 5: Requirements for AlarmTransmission Systems Section 1: GeneralRequirements for Systems First Edition

IEC 60839-5-2 Alarm Systems Part 5: Requirements for AlarmTransmission Systems Section 2: GeneralRequirements for Equipment First Edition

IEC 60839-5-4 Alarm Systems Part 5: Requirements for AlarmTransmission Systems Section 4: Alarm TransmissionSystems Using Dedicated Alarm Transmission PathsFirst Edition

IEC 60839-5-5 Alarm Systems Part 5: Requirements for AlarmTransmission Systems Section 5: Requirements forDigital Communicator Systems Using the PublicSwitched Telephone Network First Edition

IEC 60839-5-6 Alarm Systems Part 5: Requirements for AlarmTransmission Systems Section 6: Requirements forVoice Communicator Systems Using the PublicSwitched Telephone Network First Edition

IEC 60839-10-1 Alarm Systems Part 10: Alarm Systems for RoadVehicles - Section 1: Passenger Cars First Edition

IEC 60840 Tests for Power Cables with Extruded Insulation forRated Voltages Above 30 kV (Um = 36 kV) up to 150kV (Um = 170 kV) First Edition; Corrigendum-11/1988; Amendment 2-1993, IncludingAmendment 1; Corrigendum-07/1993

IEC 60841 Audio Recording - PCM Encoder/Decoder System FirstEdition

IEC 60842 Guide for Application and Operation of Turbine-TypeSynchronous Machines Using Hydrogen as a CoolantFirst Edition

IEC 60843-1 Helical-Scan Video Tape Cassette System Using 8 mmMagnetic Tape - 8 mm Video Part 1: GeneralSpecifications Second Edition

IEC 60843-2 Helical-Scan Video Tape Cassette System Using 8 mmMagnetic Tape - 8 mm Video Part 2: PCM Multi-TrackAudio System First Edition; CENELEC EN 60843-2: 1995

IEC 60843-3 Helical-Scan Video Tape Cassette System Using 8 mmMagnetic Tape - 8 mm Video Part 3: High-BandSpecifications for Hi 8 First Edition; CENELEC EN60843-3: 1993

IEC 60844 Pre-Recorded Capacitance Grooveless VideodiscSystem 50 Hz/625 Lines - PAL, on Type VHD FirstEdition

IEC 60845 Pre-Recorded Capacitance Grooveless VideodiscSystem 60 Hz/525 Lines - NTSC, on Type VHD FirstEdition

IEC 60846 Beta, X and Gamma Radiation Dose Equivalent andDose Equivalent Rate Meters for Use in RadiationProtection First Edition

IEC 60847 Characteristics of Local Area Networks (LAN) FirstEdition

IEC 60848 Preparation of Function Charts for Control SystemsFirst Edition; Corrigendum-09/1990; AS/NZS 4382: 1996

IEC 60849 Sound Systems for Emergency Purposes Second Edition IEC 60850 Supply Voltages of Traction Systems First Edition IEC 60851-1 Winding Wires Test Methods Part 1: General Second

Edition IEC 60851-2 Winding Wires - Test Methods - Part 2:


Determination of Dimensions Second Edition IEC 60851-3 Winding Wires - Test Methods - Part 3: Mechanical

Properties Second Edition; Amendment 1 08 1997 IEC 60851-4 Winding Wires - Test Methods - Part 4: Chemical

Properties Edition 2.1 IEC 60851-5 Winding Wires - Test Methods - Part 5: Electrical

Properties Third Edition; Amendment 1 03-1997 IEC 60851-6 Winding Wires - Test Methods - Part 6: Thermal

Properties Second Edition; Amendment 1 05-1997 IEC 60852-1 Outline Dimensions of Transformers and Inductors

for Use in Telecommunication and ElectronicEquipment Part 1: Transformers and Inductors UsingYEI-1 Laminations First Edition

IEC 60852-2 Outline Dimensions of Transformers and Inductorsfor Use in Telecommunication and ElectronicEquipment Part 2: Transformers and Inductors UsingYEx-2 Laminations for Printed Wiring Board MountingFirst Edition

IEC 60852-3 Outline Dimensions of Transformers and Inductorsfor Use in Telecommunication and ElectronicEquipment Part 3: Transformers and Inductors UsingYUI-1 Laminations First Edition

IEC 60852-4 Outline Dimensions of Transformers and Inductorsfor Use in Telecommunication and ElectronicEquipment - Part 4: Transformers and InductorsUsing YUI-2 Laminations First Edition

IEC 60852-5 Outline Dimensions of Transformers and Inductorsfor Use in Telecommunication and ElectronicEquipment - Part 5: Transformers and InductorsUsing the Series Q of C-Cores First Edition

IEC 60853-1 Calculation of the Cyclic and Emergency CurrentRating of Cables Part 1: Cyclic Rating Factor forCables up to and Including 18/30 (36) kV FirstEdition; (Amendment 1-1994)

IEC 60853-2 Calculation of the Cyclic and Emergency CurrentRating of Cables Part 2: Cyclic Rating of CablesGreater Than 18/30 (36) kV and Emergency Ratingsfor Cables of All Voltages First Edition

IEC 60854 Methods of Measuring the Performance of UltrasonicPulse-Echo Diagnostic Equipment First Edition

IEC 60855 Insulating Foam-Filled Tubes and Solid Rods forLive Working First Edition; CENELEC EN 60 855: 1996

IEC 60856 Pre-Recorded Optical Reflective Videodisk System "Laser Vision" 50 Hz/625 Lines - PAL FirstEdition; Amendment 1 07-1991; Amendment 2 05-1997

IEC 60857 Pre-Recorded Optical Reflective Videodisk System "Laser Vision" 60 Hz/525 Lines - M/NTSC FirstEdition; Amendment 1 07-1991; Amendment 2 04-1997

IEC 60858 Determination of the Image Distortion of Electro-Optical X-Ray Image Intensifiers First Edition

IEC 60859 Cable Connections for Gas-Insulated Metal-EnclosedSwitchgear for Rated Voltages of 72.5 kV and AboveFirst Edition

IEC 60860 Warning Equipment for Criticality Accidents FirstEdition

IEC 60861 Equipment for Continuously Monitoring for Beta andGamma Emitting Radionuclides in Liquid EffluentsFirst Edition

IEC 60862-1 Surface Acoustic Wave (SAW) Filters Part 1: GeneralInformation, Standard Values and Test ConditionsChapter I: General Information and Standard ValuesChapter II: Test Conditions First Edition

IEC 60862-2 Surface Acoustic Wave (SAW) Filters Part 2: Guideto the Use of Surface Acoustic Wave Filters


(Chapter III) First Edition IEC 60862-3 Surface Acoustic Wave (SAW) Filters Part 3:

Standard Outlines (Chapter IV) First Edition IEC 60863 Presentation of Reliability, Maintainability and

Availability Predictions First Edition IEC 60864-1 Standardization of Interconnections between

Broadcasting Transmitters or Transmitter Systemsand Supervisory Equipment Part 1: InterfaceStandards for Systems Using DedicatedInterconnections First Edition; Amendment 1-1987

IEC 60864-2 Standardization of Interconnections betweenBroadcasting Transmitters or Transmitter Systemsand Supervisory Equipment - Part 2: InterfaceStandards for Systems using Data Bus TypeInterconnections First Edition

IEC 60865-1 Short-Circuit Currents - Calculation of EffectsPart 1: Definitions and Calculation Methods SecondEdition; CENELEC EN 60865-1: 1993; Corrigendum-03/1995

IEC 60865-2 Short-Circuit Currents - Calculation of Effects - Part 2: Examples of Calculation First Edition

IEC 60866 Characteristics and Calibration of Hydrophones forOperation in the Frequency Range 0.5 MHz to 15 MHzFirst Edition

IEC 60867 Insulating Liquids - Specifications for UnusedLiquids Based on Synthetic Aromatic HydrocarbonsSecond Edition; CENELEC EN 60867: 1994

IEC 60868 Flickermeter - Functional and Design SpecificationsFirst Edition; Amendment 1-1990; CENELEC EN60868:1993; AS/NZS 4376: 1996

IEC 60868-0 Flickermeter Part 0: Evaluation of Flicker SeverityFirst Edition; CENELEC EN 60868-0: 1993; AS/NZS4377: 1996

IEC 60869-1 Fibre Optic Attenuators - Part 1: GenericSpecification Second Edition; (IECQ QC 800000)

IEC 60869-1-1 Fibre Optic Attenuators - Part 1-1: Blank DetailSpecification First Edition; (IECQ QC 800001)

IEC 60870-1-1 Telecontrol Equipment and Systems Part 1: GeneralConsiderations Section One - General PrinciplesFirst Edition

IEC 60870-1-2 Telecontrol Equipment and Systems Part 1: GeneralConsiderations Section 2 - Guide for SpecificationsFirst Edition

IEC TR 60870-1-3 Telecontrol Equipment and Systems - Part 1: GeneralConsiderations - Section 3: Glossary Second Edition

IEC 60870-1-4 Telecontrol Equipment and Systems - Part 1: GeneralConsiderations - Section 4: Basic Aspects ofTelecontrol Data Transmission and Organization ofStandards IEC 870-5 and IEC 870-6 First Edition

IEC 60870-2-1 Telecontrol Equipment and Systems - Part 2: Operating Conditions - Section 1: Power Supply andElectromagnetic Compatibility Second Edition; CENELEC EN 60 870-2-1: 1996

IEC 60870-2-2 Telecontrol Equipment and Systems - Part 2: Operating Conditions - Section 2: EnvironmentalConditions (Climatic, Mechanical and Other Non-Electrical Influences) First Edition

IEC 60870-3 Telecontrol Equipment and Systems Part 3: Interfaces (Electrical Characteristics) FirstEdition

IEC 60870-4 Telecontrol Equipment and Systems Part 4: Performance Requirements First Edition

IEC 60870-5-1 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section One - Transmission


Frame Formats First Edition; (CENELEC EN60870-5-1: 1993)

IEC 60870-5-2 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 2: Link TransmissionProcedures First Edition; (CENELEC EN 60870-5-2: 1993)

IEC 60870-5-3 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 3: General Structureof Application Data First Edition

IEC 60870-5-4 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 4: Definition andCoding of Application Information Elements FirstEdition; CENELEC EN 60870-5-4: 1993

IEC 60870-5-5 Telecontrol Equipment and Systems - Part 5: Transmission Protocols - Section 5: BasicApplication Functions First Edition; CENELEC EN60870-5-5: 1995

IEC 60870-5-101 Telecontrol Equipment and Systems Part 5: Transmission Protocols - Section 101: CompanionStandard for Basic Telecontrol Tasks FirstEdition; CENELEC EN 60870-5-101: 1996

IEC 60870-5-102 Telecontrol Equipment and Systems - Part 5: Transmission Protocols - Section 102: CompanionStandard for the Transmission of Integrated Totalsin Electric Power Systems First Edition; CENELEC EN60 870-5-102: 1996

IEC 60870-5-103 Telecontrol Equipment and Systems - Part 5-103: Transmission Protocols - Companion Standard for theInformative Interface of Protection Equipment FirstEdition

IEC TR 60870-6-1 Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standardsand ITU-T Recommendations - Section 1: ApplicationContext and Organization of Standards First Edition

IEC 60870-6-2 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standardsand ITU-T Recommendations - Section 2: Use of BasicStandards (OSI Layers 1- 4) First Edition; CENELECEN 60870-6-2: 1995

IEC 60870-6-501 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standardsand ITU-T Recommendations - Section 501: TASE.1Service Definitions First Edition

IEC 60870-6-502 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standardsand ITU-T Recommendations - Section 502: TASE.1Protocol Definitions First Edition; CENELEC EN60870-2-502: 1996

IEC 60870-6-503 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standardsand ITU-T Recommendations - Section 503: TASE.2Services and Protocol First Edition

IEC 60870-6-601 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standardsand ITU-T Recommendations - Section 601: FunctionalProfile for Providing the Connection-OrientedTransport Service in an End System Connected ViaPermanent Access to a Packet Switched Data NetworkFirst Edition

IEC 60870-6-802 Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standardsand ITU-T Recommendations - Section 802: TASE.2Object Models First Edition

IEC 60871-1 Shunt Capacitors for A.C. Power Systems Having aRated Voltage Above 1 000 V - Part 1: General


- Performance, Testing and Rating - SafetyRequirements - Guide for Installation and OperationSecond Edition; Corrigendum -1998

IEC 60871-2 Shunt Capacitors for A.C. Power Systems Having aRated Voltage Above 660 V Part 2: Endurance TestingFirst Edition; Amendment 1-1991

IEC TR 60871-3 Shunt Capacitors for A.C. Power Systems Having aRated Voltage Above 1 000 V - Part 3: Protection ofShunt Capacitors and Shunt Capacitor Banks FirstEdition

IEC 60871-4 Shunt Capacitors for A.C. Power Systems Having aRated Voltage Above 1 000 V - Part 4: InternalFuses First Edition

IEC 60872 Marine Automatic Radar Plotting Aids (ARPA) Operational Requirements - Methods of Testing andTest Results First Edition; (Amendment 1-1991) (CENELEC EN 60872/A1: 1993)

IEC 60873 Methods of Evaluating the Performance of Electricaland Pneumatic Analogue Chart Recorders for Use inIndustrial-Process Control Systems First Edition; (CENELEC EN 60873:1993)

IEC 60874-0 Connectors for Optical Fibres and Cables Part 0: Guide for the Construction of SectionalSpecifications First Edition

IEC 60874-1 Connectors for Optical Fibres and Cables Part 1: Generic Specification Third Edition; (Corrigendum-1993) (Amendment 1-1994) (IECQ QC910000) (Corrigendum-1996)

IEC 60874-1-1 Connectors for Optical Fibres and Cables Part 1-1: Blank Detail Specification - EnvironmentalCategories First Edition; (IECQ QC 910001 to 910006and QC 910099) (Corrigendum-1996)

IEC 60874-2 Connectors for Optical Fibres and Cables Part 2: Sectional Specification for Fibre Optic Connector - Type F-SMA Second Edition; (IECQ QC 910100) (Corrigendum-1996)

IEC 60874-3 Connectors for Optical Fibres and Cables Part 3: Sectional Specification for Fibre Optic Connector - Type CFO3 Second Edition; (IECQ QC 910300) (Corrigendum-1996)

IEC 60874-4 Connectors for Optical Fibres and Cables Part 4: Sectional Specification for Fibre Optic Connector - Type CFO4 Second Edition; (IECQ QC 910500) (Corrigendum-1996)

IEC 60874-5 Connectors for Optical Fibres and Cables Part 5: Sectional Specification for Fibre Optic Connector - Type BAM Second Edition; (IECQ QC 910400) (Corrigendum-1996)

IEC 60874-6 Connectors for Optical Fibres and Cables Part 6: Sectional Specification for Fibre Optic Connector - Type LSA Second Edition; (IECQ QC 910200) (Corrigendum-1996)

IEC 60874-7 Connectors for Optical Fibres and Cables Part 7: Sectional Specification for Fibre Optic Connector - Type FC Second Edition; (IECQ QC 910700) (Corrigendum-1996)

IEC 60874-8 Connectors for Optical Fibres and Cables Part 8: Sectional Specification for Fibre Optic Connector - Type D Second Edition; (IECQ QC 910600) (Corrigendum-1996)

IEC 60874-9 Connectors for Optical Fibres and Cables Part 9: Sectional Specification for Fibre Optic Connector - Type OF-2 Second Edition; (IECQ QC 910800) (Corrigendum-1996)

IEC 60874-10 Connectors for Optical Fibres and Cables Part 10:


Sectional Specification Fibre Optic Connector TypeBFOC/2,5 First Edition; (IECQ QC 911200) (Corrigendum-1996)

IEC 60874-10-1 Connectors for Optical Fibres and Cables - Part10-1: Detail Specification for Fibre OpticConnector Type BFOC/2,5 Terminated to MultimodeFibre Type A1 First Edition; QC 910003XX0001

IEC 60874-10-2 Connectors for Optical Fibres and Cables - Part10-2: Detail Specification for Fibre OpticConnector Type BFOC/2,5 Terminated to Single-ModeFibre Type B1 First Edition; QC 910003XX0002

IEC 60874-10-3 Connectors for Optical Fibres and Cables - Part10-3: Detail Specification for Fibre Optic AdaptorType BFOC/2,5 for Single and Multimode Fibre FirstEdition; QC 910003XX0003

IEC 60874-11 Connectors for Optical Fibres and Cables Part 11: Sectional Specification for Fibre Optic Connector - Type OCCA-PC First Edition; (IECQ QC 911600) (Corrigendum-1996)

IEC 60874-12 Connectors for Optical Fibres and Cables Part 12: Sectional Specification for Fibre Optic Connector - Type OCCA-BU First Edition; (Corrigendum-1996) (IECQ QC 911500)

IEC 60874-13 Connectors for Optical Fibres and Cables Part 13: Sectional Specification for Fibre Optic Connector - Type CF 08 First Edition; (IECQ QC 911700) (Corrigendum-1996)

IEC 60874-14 Connectors for Optical Fibres and Cables Part 14: Sectional Specification for Fibre Optic Connector - Type SC First Edition; Corrigendum-1993; IECQ QC911800; Corrigendum-1996

IEC 60874-14-1 Connectors for Optical Fibres and Cables - Part14-1: Detail Specification for Fibre OpticConnector Type SC-PC Standard Terminated toMultimode Fibre Type A1a, A1b First Edition; QC910004XX0001

IEC 60874-14-2 Connectors for Optical Fibres and Cables - Part14-2: Detail Specification for Fibre OpticConnector Type SC-PC Standard Terminated to Single-Mode Fibre Type B1 First Edition; QC 910004XX0002

IEC 60874-14-3 Connectors for Optical Fibres and Cables - Part14-3: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Single-Mode Fibre FirstEdition; QC 910004XX0003

IEC 60874-14-4 Connectors for Optical Fibres and Cables - Part14-4: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Multimode Fibre FirstEdition; QC 910004XX0004

IEC 60874-14-5 Connectors for Optical Fibres and Cables - Part14-5: Detail Specification for Fibre OpticConnector Type SC-PC Untuned Terminated to Single-Mode Fibre Type B1 First Edition; QC 910004XX0005

IEC 60874-14-6 Connectors for Optical Fibres and Cables - Part14-6: Detail Specification for Fibre OpticConnector Type SC-APC 9 Degrees Untuned Terminatedto Single-Mode Fibre Type B1 First Edition; QC910004XX0006

IEC 60874-14-7 Connectors for Optical Fibres and Cables - Part14-7: Detail Specification for Fibre OpticConnector Type SC-APC 9 Degrees Tuned Terminated toSingle-Mode Fibre Type B1 First Edition; QC910004XX0007

IEC 60874-15 Connectors for Optical Fibres and Cables Part 15: Sectional Specification for Fibre Optic Connector - Type DS First Edition; (IECQ QC 912000)


(Corrigendum-1996) IEC 60874-16 Connectors for Optical Fibres and Cables - Part

16: Sectional Specification for Fibre OpticConnector - Type MT First Edition; (IECQ QC911900) (Corrigendum-1996)

IEC 60874-17 Connectors for Optical Fibres and Cables - Part17: Sectional Specification for Fibre OpticConnector - Type F-05 (Friction Lock) FirstEdition; IECQ QC 911300; Corrigendum-1996

IEC 60874-19 Connectors for Optical Fibres and Cables - Part19: Sectional Specification for Fibre OpticConnector - Type SC-D(Uplex) First Edition; (IECQQC 912100) (Corrigendum-1996)

IEC 60875-1 Fibre Optic Branching Devices Part 1: GenericSpecification Third Edition; IECQ QC 810000

IEC 60875-1-1 Fibre Optic Branching Devices Part 1-1: BlankDetail Specification First Edition; IECQ QC 810001

IEC 60875-2 Fibre Optic Branching Devices Part 2: SectionalSpecification - Non-Wavelength Selective BranchingDevices Second Edition; IECQ QC 810100

IEC 60875-3 Fibre Optic Branching Devices Part 3: SectionalSpecification - Wavelength Selective BranchingDevices Second Edition; IECQ QC 810200

IEC 60876-1 Fibre Optic Switches - Part 1: GenericSpecification Second Edition; (IECQ QC 820000)

IEC 60877 Procedures for Ensuring the Cleanliness ofIndustrial-Process Measurement and ControlEquipment in Oxygen Service First Edition

IEC 60878 Graphical Symbols for Electrical Equipment inMedical Practice First Edition

IEC 60879 Performance and Construction of ElectricCirculating Fans and Regulators First Edition; Corrigendum 01/1992

IEC 60880 Software for Computers in the Safety Systems ofNuclear Power Stations First Edition

IEC 60882 Pre-Heat Requirements for Starterless TubularFluorescent Lamps First Edition

IEC 60883 Measuring Method for Chrominance Signal-to-RandomNoise Ratio for Video Tape Recorders First Edition

IEC 60884-1 Plugs and Socket-Outlets for Household and SimilarPurposes - Part 1: General Requirements SecondEdition; (Amendment 1-1994) (Amendment 2-1995)

IEC 60884-2-1 Plugs and Socket-Outlets for Household and SimilarPurposes Part 2: Particular Requirements for FusedPlugs First Edition

IEC 60884-2-2 Plugs and Socket-Outlets for Household and SimilarPurposes Part 2: Particular Requirements forSocket-Outlets for Appliances First Edition

IEC 60884-2-3 Plugs and Socket-Outlets for Household and SimilarPurposes Part 2: Particular Requirements forSwitched Socket-Outlets without Interlock for FixedInstallations First Edition

IEC 60884-2-4 Plugs and Socket-Outlets for Household and SimilarPurposes - Part 2: Particular Requirements forPlugs and Socket-Outlets for SELV First Edition

IEC 60884-2-5 Plugs and Socket-Outlets for Household and SimilarPurposes - Part 2: Particular Requirements forAdaptors First Edition

IEC 60884-2-6 Plugs and Socket-Outlets for Household and SimilarPurposes - Part 2-6: Particular Requirements forSwitched Socket-Outlets with Interlock for FixedInstallations First Edition

IEC 60885-1 Electrical Test Methods for Electric Cables Part1: Electrical Tests for Cables, Cords and Wires for


Voltages up to and Including 450/750 V FirstEdition

IEC 60885-2 Electrical Test Methods for Electric Cables Part2: Partial Discharge Tests First Edition

IEC 60885-3 Electrical Test Methods for Electric Cables Part3: Test Methods for Partial Discharge Measurementson Lengths of Extruded Power Cable First Edition

IEC 60886 Investigations on Test Procedures for UltrasonicCleaners First Edition

IEC 60887 Glass Bulb Designation System for Lamps FirstEdition

IEC 60888 Zinc-Coated Steel Wires for Stranded ConductorsFirst Edition

IEC 60889 Hard-Drawn Aluminium Wire for Overhead LineConductors First Edition

IEC 60890 A Method of Temperature- Rise Assessment byExtrapolation for Partially Type-Tested Assemblies (PTTA) of Low-Voltage Switchgear and ControlgearFirst Edition; (Amendment 1-1995)

IEC 60891 Procedures for Temperature and IrradianceCorrections to Measured I-V Characteristics ofCrystalline Silicon Photovoltaic Devices FirstEdition; (Amendment 1-1992) (CENE EN 60891:1994)

IEC 60892 Effects of Unbalanced Voltages on the Performanceof Three- Phase Cage Induction Motors First Edition

IEC 60893-1 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 1: Definitions, Designations andGeneral Requirements First Edition

IEC 60893-2 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 2: Methods of Test First Edition; Corrigendum-1995

IEC 60893-3-1 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 1: Types of Industrial RigidLaminated Sheets First Edition; (Amendment 1-1996)

IEC 60893-3-2 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 2: Requirements for RigidLaminated Sheets Based on Epoxide Resins FirstEdition; Corrigendum 09 1995; Corrigendum / 2; 121997; Amendment 1 04 1998

IEC 60893-3-3 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 3: Requirements for RigidLaminated Sheets Based on Melamine Resins FirstEdition; Corrigendum-1995; Corrigendum / 2- 1997

IEC 60893-3-4 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 4: Requirements for RigidLaminated Sheets Based on Phenolic Resins FirstEdition; Corrigendum-1995; Corrigendum / 2- 1997

IEC 60893-3-5 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 5: Requirements for RigidLaminated Sheets Based on Polyester Resins FirstEdition; Corrigendum-1995; Corrigendum / 2- 1997

IEC 60893-3-6 Specification for Industrial Rigid Laminated Sheets


Based on Thermosetting Resins for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 6: Requirements for RigidLaminated Sheets Based on Silicone Resins FirstEdition; Corrigendum-1995; Corrigendum / 2- 1997

IEC 60893-3-7 Specification for Industrial Rigid Laminated SheetsBased on Thermosetting Resins for ElectricalPurposes Part 3: Specifications for IndividualMaterials - Sheet 7: Requirements for RigidLaminated Sheets Based on Polyimide Resins FirstEdition; Corrigendum- 1997

IEC 60894 Guide for a Test Procedure for the Measurement ofLoss Tangent of Coils and Bars for Machine WindingsFirst Edition; Corrigendum 07/1987

IEC 60895 Conductive Clothing for Live Working at a NominalVoltage up to 800 kV A.C. First Edition

IEC 60896-1 Stationary Lead-Acid Batteries General Requirementsand Methods of Test Part 1: Vented Types FirstEdition; (Amendment 2-1990)

IEC 60896-2 Stationary Lead-Acid Batteries - GeneralRequirements and Methods of Test - Part 2: ValveRegulated Types First Edition; CENELEC EN 60896-2: 1995

IEC 60897 Methods for the Determination of the LightningImpulse Breakdown Voltage of Insulating LiquidsFirst Edition; CENELEC EN 60 898: 1991

IEC 60898 Electrical Accessories - Circuit-Breakers forOvercurrent Protection for Household and SimilarInstallations Second Edition

IEC 60899 Sampling Rate and Source Encoding for ProfessionalDigital Audio Recording First Edition

IEC 60900 Hand Tools for Live Working up to 1000 V A.C. and1500 V D.C. First Edition; CENELEC EN 60900: 1993; Amendment 1-1995

IEC 60901 Single-Capped Fluorescent Lamps - PerformanceSpecifications Second Edition; CENELEC EN 60901: 1996; Amendment 1-1997

IEC 60902 Industrial-Process Measurement and Control Termsand Definitions First Edition

IEC 60903 Specification for Gloves and Mitts of InsulatingMaterial for Live Working First Edition; CENELEC EN60903: 1992

IEC 60904-1 Photovoltaic Devices Part 1: Measurement ofPhotovoltaic Current-Voltage Characteristics FirstEdition; CENELEC EN 60904-1: 1993

IEC 60904-2 Photovoltaic Devices Part 2: Requirements forReference Solar Cells First Edition; Amendment1-1998

IEC 60904-3 Photovoltaic Devices Part 3: Measurement Principlesfor Terrestrial Photovoltaic (PV) Solar Deviceswith Reference Spectral Irradiance Data FirstEdition; (CENELEC EN 60904-3: 1993)

IEC 60904-5 Photovoltaic Devices - Part 5: Determination of theEquivalent Cell Temperature (ECT) of Photovoltaic (PV) Devices by the Open-Circuit Voltage MethodFirst Edition; CENELEC EN 60 904-5: 1995

IEC 60904-6 Photovoltaic Devices - Part 6: Requirements forReference Solar Modules First Edition; Amendment1-1998

IEC 60904-7 Photovoltaic Devices - Part 7: Computation ofSpectral Mismatch Error Introduced in the Testingof a Photovoltaic Device Second Edition

IEC 60904-8 Photovoltaic Devices - Part 8: Measurement ofSpectral Response of a Photovoltaic (PV) Device


Second Edition IEC 60904-9 Photovoltaic Devices - Part 9: Solar Simulator

Performance Requirements First Edition IEC 60904-10 Photovoltaic Devices - Part 10: Methods of

Linearity Measurement First Edition IEC 60905 Loading Guide for Dry-Type Power Transformers First

Edition; Corrigendum 04/1991 IEC 60906-1 IEC System of Plugs and Socket-Outlets for

Household and Similar Purposes Part 1:Plugs andSocket-Outlets 16 A 250 V A.C. First Edition

IEC 60906-2 IEC System of Plugs and Socket-Outlets forHousehold and Similar Purposes - Part 2: Plugs andSocket-Outlets 15 A 125 V A.C. Second Edition; Supersedes IEC 906-2: 1992

IEC 60906-3 IEC System of Plugs and Socket-Outlets forHousehold and Similar Purposes - Part 3: SELV Plugsand Socket-Outlets, 16 A 6 V, 12 V, 24 V, 48 V, A.C. and D.C. First Edition

IEC 60907 Local Area Networks CSMA/CD 10 Mbit/s BasebandPlanning and Installation Guide First Edition

IEC 60908 Compact Disc Digital Audio System First Edition; Amendment 1-1992; Corrigendum 03/1993, to Amendment1; CENELEC EN 60908/A1: 1993

IEC 60909 Short-Circuit Current Calculation in Three-PhaseA.C. Systems First Edition

IEC 60909-1 Short-Circuit Current Calculation in Three-PhaseA.C. Systems Part 1: Factors for the Calculation ofShort-Circuit Currents in Three-Phase A.C. SystemsAccording to IEC 909 First Edition

IEC 60909-2 Electrical Equipment - Data for Short-CircuitCurrent Calculations in Accordance with IEC 909 (1988) First Edition

IEC 60909-3 Short-Circuit Current Calculation in Three-PhaseA.C. Systems - Part 3: Currents During Two SeparateSimultaneous Single Phase Line-to-Earth ShortCircuits and Partial Short-Circuit Currents FlowingThrough Earth First Edition

IEC 60910 Containment Monitoring Instrumentation for EarlyDetection of Developing Deviations from NormalOperation in Light Water Reactors First Edition

IEC 60911 Measurements for Monitoring Adequate Cooling withinthe Core of Pressurized Light Water Reactors FirstEdition

IEC 60912 Nuclear Instrumentation - ECL (Emitter CoulpledLogic) Front Panel Interconnection in Counter LogicSecond Edition

IEC 60913 Electric Traction Overhead Lines First Edition IEC 60914 Conference Systems - Electrical and Audio

Requirements First Edition IEC 60915 Capacitors and Resistors for Electronic Equipment

Preferred Dimensions of Spindle Ends, Bushes andfor the Mounting of Single-Hole, Bush-Mounted, Spindle-Operated Electronic Components FirstEdition

IEC 60916 Mechanical Structures for Electronic EquipmentTerminology First Edition

IEC 60917 Modular Order for the Development of MechanicalStructures for Electronic Equipment Practices FirstEdition; Amendment 1-1993; CENELEC EN 60917/A1: 1994

IEC 60917-0 Modular Order for the Development of MechanicalStructures for Electronic Equipment Practices Part0: Guide for the Users of IEC Publication 917 FirstEdition; (CENELEC EN 60917-0: 1992)


IEC 60917-2 Modular Order for the Development of MechanicalStructures for Electronic Equipment Practices Part2: Sectional Specification - Interface Co-Ordination Dimensions for the 25 mm EquipmentPractice First Edition

IEC 60917-2-1 Modular Order for the Development of MechanicalStructures for Electronic Equipment Practices - Part 2: Sectional Specification - Interface Co-Ordination Dimensions for the 25 mm EquipmentPractice - Section 1: Detail Specification - Dimensions for Cabinets and Racks First Edition

IEC 60917-2-2 Modular Order for the Development of MechanicalStructures for Electronic Equipment Practices - Part 2: Sectional Specification - Interface Co-Ordination Dimensions for the 25 mm EquipmentPractice - Section 2: Detail Specification - Dimensions for Subracks, Chassis, Backplanes, Front Panels and Plug-In Units First Edition

IEC 60918 PVC Insulated Ribbon Cable with a Pitch of 1,27 mmSuitable for Insulation Displacement TerminationFirst Edition; (Amendment 1-1992)

IEC 60919-1 Performance of High-Voltage D.C. (HVDC) SystemsPart 1: Steady-State Conditions First Edition

IEC 60919-2 Performance of High-Voltage D.C. (HVDC) SystemsPart 2: Faults and Switching First Edition

IEC 60920 Ballasts for Tubular Fluorescent Lamps General andSafety Requirements First Edition; (Amendment1-1993) (Amendment 2-1995)

IEC 60921 Ballasts for Tubular Fluorescent Lamps PerformanceRequirements First Edition; Corrigendum 04/1989; Amendment 1-1990; Amendment 2-1994; CENELEC EN60921: 1991, AMD A1: 1992, A2: 1995

IEC 60922 Ballasts for Discharge Lamps (Excluding TubularFluorescent Lamps) General and Safety RequirementsFirst Edition; (Amendment 2-1992, IncludesAmendment 1)

IEC 60922 Auxiliaries for Lamps - Ballasts for DischargeLamps (Excluding Tubular Fluorescent Lamps) - General and Safety Requirements Second Edition

IEC 60923 Auxilaries for Lamps - Ballasts for DischargeLamps (Excluding Tubular Fluorescent Lamps) - Performance Requirements Second Edition; CENELECEN 60923: 1996

IEC 60924 D.C. Supplied Electronic Ballasts for TubularFluorescent Lamps General and Safety RequirementsFirst Edition; (Amendment 1-1993)

IEC 60925 D.C. Supplied Electronic Ballasts for TubularFluorescent Lamps Performance Requirements FirstEdition; (Amendment 1-1996)

IEC 60926 Auxiliaries for Lamps - Starting Devices (OtherThan Glow Starters) - General and SafetyRequirements Second Edition; CENELEC EN 60926: 1996

IEC 60927 Auxiliaries for Lamps - Starting Devices (OtherThan Glow Starters) Performance Requirements SecondEdition

IEC 60928 Auxiliaries for Lamps - A.C. Supplied ElectronicBallasts for Tubular Fluorescent Lamps General andSafety Requirements Second Edition; CENELEC EN60928: 1995

IEC 60929 A.C. - Supplied Electronic Ballasts for TubularFluorescent Lamps - Performance Requirements FirstEdition; Corrigendum 06/1991; Amendment 1-1994; Amendment 2-1996

IEC 60930 Guidelines for Administrative, Medical, and Nursing


Staff Concerned with the Safe Use of MedicalElectrical Equipment First Edition

IEC 60931-1 Shunt Power Capacitors of the Non-Self-Healing Typefor A.C. Systems Having a Rated Voltage up to andIncluding 1 000 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guidefor Installation and Operation Second Edition

IEC 60931-2 Shunt Power Capacitors of the Non-Self-Healing Typefor A.C. Systems Having a Rated Voltage up to andIncluding 1 000 V - Part 2: Ageing Test andDestruction Test Second Edition; CENELEC EN60931-2: 1996

IEC 60931-3 Shunt Power Capacitors of the Non-Self-Healing Typefor A.C. Systems Having a Rated Voltage up to andIncluding 1 000 V - Part 3: Internal Fuses FirstEdition

IEC 60932 Additional Requirements for Enclosed Switchgear andControlgear from 1 kV to 72.5 kV to Be Used inSevere Climatic Conditions First Edition

IEC 60933-1 Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 1: 21-Pin Connector for Video Systems - Application No.1First Edition; Corrigendum 02/1989; Amendment1-1992

IEC 60933-2 Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 2: 21-Pin Connector for Video Systems - Application No.2First Edition

IEC 60933-3 Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 3: Interface for the Interconnection of ENG Camerasand Portable VTRs Using Non-Composite Signals, for625 Line/50 Field Systems First Edition; CENELEC EN60933-3: 1992

IEC 60933-4 Audio, Video and Audiovisual Systems - Interconnections and Matching Values - Part 4: Connector and Cordset for Domestic Digital Bus (D2B) First Edition

IEC 60933-5 Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 5: Y/CConnector for Video Systems - Electrical MatchingValues and Description of the Connector FirstEdition; (CENELEC EN 60933-5: 1993)

IEC 60934 Circuit-Breakers for Equipment (CBE) SecondEdition; Amendment 1-1994; Amendment 2-1997

IEC 60935 Nuclear Instrumentation - Modular High Speed DataAcquisition System - FASTBUS Second Edition

IEC 60936 Shipborne Radar Operational and PerformanceRequirements Methods of Tests and Required TestResults First Edition; CENELEC EN 60936: 1993

IEC 60937 Cryostat End-Cap Dimensions for GermaniumSemiconductor Detectors for Gamma-Ray SpectrometersFirst Edition

IEC 60938-1 Fixed Inductors for Radio Interference SuppressionPart 1: Generic Specification First Edition

IEC 60938-2 Fixed Inductors for Radio Interference SuppressionPart 2: Sectional Specification Selection ofMethods of Test and General Requirements FirstEdition

IEC 60939-1 Complete Filter Units for Radio InterferenceSuppression Part 1: Generic Specification FirstEdition

IEC 60939-2 Complete Filter Units for Radio InterferenceSuppression Part 2: Sectional Specification


Selection of Methods of Test and GeneralRequirements First Edition; (Amendment 1-1996)

IEC 60940 Guidance Information on the Application ofCapacitors, Resistors, Inductors, and CompleteFilter Units for Radio Interference SuppressionFirst Edition; Corrigendum-1998

IEC 60941 Mechanical Endurance Functional Tests forElectrical Insulation Systems First Edition

IEC 60942 Electroacoustics - Sound Calibrators Second Edition IEC TR 60943 Guidance Concerning the Permissible Temperature

Rise for Parts of Electrical Equipment, inParticular for Terminals Second Edition

IEC 60944 Guide for the Maintenance of Silicone TransformerLiquids First Edition

IEC 60945 Maritime Navigation and RadiocommunicationEquipment and Systems - General Requirements - Methods of Testing and Required Test ResultsThird Edition

IEC 60946 Binary Direct Voltage Signals for ProcessMeasurement and Control Systems First Edition

IEC 60947-1 Low-Voltage Switchgear and Controlgear - Part 1: General Rules Second Edition; Amendment 1- 1997; Corrigendum- 1998

IEC 60947-2 Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers Second Edition; Corrigendum- 1997; Amendment 1-1997

IEC 60947-3 Low-Voltage Switchgear and Controlgear Part 3: Switches, Disconnectors, Switch-Disconnectors andFuse-Combination Units First Edition; Corrigendum12/1991; Amendment 1-1994; Amendment 2-1997; CEN EN60947-3:1992; CENELEC EN 60947-3: 1992

IEC 60947-4-1 Low-Voltage Switchgear and Controlgear Part 4: Contactors and Motor-Starters Section One - Electromechanical Contactors and Motor-StartersFirst Edition; Amendment 1-1994; CENELEC EN60947-4-1: 1992; Amendment 2-1996

IEC 60947-4-2 Low-Voltage Switchgear and Controlgear; Part 4: Contactors and Motor-Starters; Section 2: ACSemiconductor Motor Controllers and Starters FirstEdition; Amendment 1-1997

IEC 60947-5-1 Low-Voltage Switchgear and Controlgear Part 5-1: Control Circuit Devices and Switching Elements - Electromechanical Control Circuit Devices SecondEdition

IEC 60947-5-2 Low-Voltage Switchgear and Controlgear Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches Second Edition

IEC 60947-5-4 Low-Voltage Switchgear and Controlgear - Part 5: Control Circuit Devices and Switching Elements - Section 4: Methods of Assessing the Performanceof Low-Energy Contacts - Special Tests FirstEdition

IEC 60947-5-5 Low-Voltage Switchgear and Controlgear - Part 5-5: Control Circuit Devices and Switching Elements - Electrical Emergency Stop Device with MechanicalLatching Function First Edition

IEC 60947-6-1 Low-Voltage Switchgear and Controlgear Part 6: Multiple Function Equipment Section One - AutomaticTransfer Switching Equipment First Edition; Amendment 1 10 1994; Amendment 2 09 1997

IEC 60947-6-2 Low-Voltage Switchgear and Controlgear Part 6: Multiple Function Equipment Section Two - Controland Protective Switching Devices (or Equipment) (CPS) First Edition; Corrigendum- 1995; Amendment


1- 1997 IEC 60947-7-1 Low-Voltage Switchgear and Controlgear Part 7:

Ancillary Equipment Section One - Terminal Blocksfor Copper Conductors First Edition; CENELEC EN60947-7-1: 1991; AS 3947.7.1: 1996

IEC 60947-7-2 Low-Voltage Switchgear and Controlgear Part 7: Ancillary Equipment - Section 2: ProtectiveConductor Terminal Blocks for Copper ConductorsFirst Edition (CENELEC EN 60947-7-2: 1995) (AS3947.7.2: 1996)

IEC 60948 Numeric Keyboard for Home Electronic Systems (HES) First Edition

IEC 60949 Calculation of Thermally Permissible Short-CircuitCurrents, Taking into Account Non-Adiabatic HeatingEffects First Edition

IEC 60950 Safety of Information Technology Equipment, Including Electrical Business Equipment SecondEdition; Amendment 1 02/1992; Amendment 2 06/1993; Amendment 3 01/1995; Amendment 4 07/1996

IEC 60951-1 Radiation Monitoring Equipment for Accident andPost-Accident Conditions in Nuclear Power PlantsPart 1: General Requirements First Edition

IEC 60951-2 Radiation Monitoring Equipment for Accident andPost-Accident Conditions in Nuclear Power PlantsPart 2: Equipment for Continuously MonitoringRadioactive Noble Gases in Gaseous Effluents FirstEdition

IEC 60951-3 Radiation Monitoring Equipment for Accident andPost-Accident Conditions in Nuclear Power PlantsPart 3: High Range Area Gamma Radiation Dose RateMonitoring Equipment First Edition

IEC 60951-4 Radiation Monitoring Equipment for Accident andPost-Accident Conditions in Nuclear Power PlantsPart 4: Process Stream in Light Water Nuclear PowerPlants First Edition

IEC 60951-5 Nuclear Power Plants - Radiation MonitoringEquipment for Accident and Post-Accident ConditionsPart 5: Radioactivity of Air in Light Water NuclearPower Plants First Edition

IEC 60952-1 Aircraft Batteries Part 1: General TestRequirements and Performance Levels First Edition; (CENELEC EN 60952-1: 1993)

IEC 60952-2 Aircraft Batteries Part 2: Design and ConstructionRequirements First Edition; (CENELEC EN 60952-2: 1993)

IEC 60952-3 Aircraft Batteries Part 3: External ElectricalConnectors First Edition

IEC 60953-1 Rules for Steam Turbine Thermal Acceptance TestsPart 1: Method A - High Accuracy for LargeCondensing Steam Turbines First Edition; CENELEC EN60 953-1: 1995

IEC 60953-2 Rules for Steam Turbine Thermal Acceptance TestsPart 2: Method B - Wide Range of Accuracy forVarious Types and Sizes of Turbines First Edition; CENELEC EN 60 953-2: 1995

IEC 60954 Process Data Highway, Types A and B (PROWAY A andB), for Distributed Process Control Systems FirstEdition

IEC 60955 Process Data Highway, Type C (PROWAY C), forDistributed Process Control Systems First Edition; (Amendment 1-1992)

IEC 60958 Digital Audio Interface First Edition; Amendment1-1993; Amendment 2-1995; Corrigendum 02/1996

IEC 60958-2 Digital Audio Interface - Part 2: Software


Information Delivery Mode First Edition IEC 60959 Provisional Head and Torso Simulator for Acoustic

Measurements on Air Conduction Hearing Aids FirstEdition

IEC 60960 Functional Design Criteria for a Safety ParameterDisplay System for Nuclear Power Stations FirstEdition

IEC 60961 Helical-Scan Video Tape Cassette System Using 12,65mm (0,5 in) Magnetic Tape on Type L SecondEdition; (CENELEC EN 60961:1994)

IEC 60962 Maintenance and Use Guide for Petroleum LubricatingOils for Steam Turbines First Edition

IEC 60963 Specification for Unused Polybutenes First Edition IEC 60964 Design for Control Rooms of Nuclear Power Plants

First Edition IEC 60965 Supplementary Control Points for Reactor Shutdown

without Access to the Main Control Room FirstEdition

IEC 60966-1 Generic Specification for Radio Frequency andCoaxial Cable Assemblies Part 1: GeneralRequirements and Test Methods First Edition; (Amendment 1-1990) (CENELEC EN 60966-1: 1993) (Amendment 2-1995)

IEC 60966-2-1 Radio Frequency and Coaxial Cable Assemblies Part2-1: Sectional Specification for Flexible CoaxialCable Assemblies First Edition; CENELEC EN60966-2-1: 1995

IEC 60966-2-2 Radio Frequency and Coaxial Cable Assemblies Part2-2: Blank Detail Specification for FlexibleCoaxial Cable Assemblies First Edition; CENELEC EN60966-2-2: 1994

IEC 60966-2-3 Radio Frequency and Coaxial Cable Assemblies - Part2-3: Detail Specification for Flexible CoaxialCable Assemblies First Edition

IEC 60966-2-4 Radio Frequency and Coaxial Cable Assemblies - Part2-4: Detail Specification for Cable Assemblies forRadio and TV Receivers (Frequency Range 0 to 3 000MHz, IEC 60169-2 Connectors) First Edition

IEC 60966-3 Radio Frequency and Coaxial Cable Assemblies Part3: Sectional Specification for Semi-FlexibleCoaxial Cable Assemblies First Edition; CENELEC EN60966-3: 1994

IEC 60966-3-1 Radio Frequency and Coaxial Cable Assemblies Part3-1: Blank Detail Specification for Semi-FlexibleCoaxial Cable Assemblies First Edition; CENELEC EN60966-3-1: 1994

IEC 60966-3-2 Radio Frequency and Coaxial Cable Assemblies - Part3-2: Detail Specification for Flexible CoaxialCable Assemblies for GSM Use (0,8 GHz - 1 GHz) First Edition

IEC 60966-4 Radio Frequency and Coaxial Cable Assemblies Part4: Sectional Specification for Semi-Rigid CoaxialCable Assemblies First Edition; CENELEC EN60966-4: 1994

IEC 60966-4-1 Radio Frequency and Coaxial Cable Assemblies Part4-1: Blank Detail Specification for Semi-RigidCoaxial Cable Assemblies First Edition; CENELEC EN60966-4-1: 1994

IEC 60967 Safety of Electrically Heated Blankets, Pads andSimilar Flexible Heating Appliances for HouseholdUse First Edition; Amendment 1-07/1991; Amendment2-11/1995; Supersedes IEC 335-17: 1974

IEC 60968 Self-Ballasted Lamps for General Lighting ServicesSafety Requirements First Edition; (Amendment


1-1991) (CENELEC EN 60968/A1: 1993) (PNS603-1:1993)

IEC 60969 Self-Ballasted Lamps for General Lighting ServicesPerformance Requirements First Edition; (Amendment1-1991) (CENELEC EN 60969/A1: 1993) (PNS603-2:1993)

IEC 60970 Methods for Counting and Sizing Particles inInsulating Liquids First Edition

IEC 60971 Semiconductor Convertors Identification Code forConvertor Connections First Edition

IEC 60972 Classification and Interpretation of New LightingProducts First Edition; (Amendment 1-1991)

IEC 60973 Test Procedures for Germanium Gamma-Ray DetectorsFirst Edition

IEC 60974-1 Safety Requirements for Arc Welding Equipment Part1: Welding Power Sources First Edition

IEC 60974-11 Arc-Welding Equipment Part 11: Electrode HoldersFirst Edition; CENELEC EN 60974-11: 1995

IEC 60974-12 Arc-Welding Equipment Part 12: Coupling Devices forWelding Cables First Edition; CENELEC EN 60974-12: 1995

IEC 60975 Microprocessor Universal Format for Object ModulesFirst Edition

IEC 60976 Medical Electrical Equipment Medical ElectronAccelerators - Functional PerformanceCharacteristics First Edition

IEC 60977 Medical Electrical Equipment Medical ElectronAccelerators in the Range 1 MeV to 50 MeV - Guidelines for Functional PerformanceCharacteristics First Edition

IEC 60978 Maintenance and Use Guide for Triaryl PhosphateEster Turbine Control Fluids First Edition

IEC 60979 Wires for Wire Wrapping Applications First Edition IEC 60980 Recommended Practices for Seismic Qualification of

Electrical Equipment of the Safety System forNuclear Generating Stations First Edition

IEC 60981 Extra-Heavy Duty Rigid Steel Conduits forElectrical Installations First Edition

IEC 60982 Level Measuring Systems Utilizing IonizingRadiation with Continuous or Switching Output FirstEdition

IEC 60983 Miniature Lamps Second Edition; CENELEC EN 60983: 1996

IEC 60984 Sleeves of Insulating Material for Live WorkingFirst Edition; Corrigendum 03/1990; CENELEC EN60984: 1992

IEC 60986 Guide to the Short-Circuit Temperature Limits ofElectric Cables with a Rated Voltage from 1,8/3 (3,6) kV to 18/30 (36) kV First Edition; (Amendment1-1993)

IEC 60987 Programmed Digital Computers Important to Safetyfor Nuclear Power Stations First Edition

IEC 60988 Acoustic Monitoring Systems for Loose PartsDetection - Characteristics, Design Criteria andOperational Procedures First Edition

IEC 60989 Separating Transformers, Autotransformers, VariableTransformers and Reactors First Edition

IEC 60990 Methods of Measurement of Touch-Current andProtection Conductor Current First Edition; Corrigendum 08/1991

IEC 60991 Resilient Mounting Rings for Small Motors - Mounting Dimensions First Edition

IEC 60993 Electrolyte for Vented Nickel-Cadmium Cells FirstEdition


IEC 60994 Guide for Field Measurement of Vibrations andPulsations in Hydraulic Machines (Turbines, StoragePumps and Pump-Turbines) First Edition; Corrigendum04-1997

IEC 60995 Determination of the Prototype Performance fromModel Acceptance Tests of Hydraulic Machines withConsideration of Scale Effects First Edition; CENELEC EN 60995: 1994

IEC 60996 Method for Verifying Accuracy of Tan DeltaMeasurements Applicable to Capacitors First Edition

IEC 60997 Determination of Polychlorinated Biphenyls (PCBs) in Mineral Insulating Oils by Packed Column GasChromatography (GC) First Edition

IEC 60998-1 Connecting Devices for Low Voltage Circuits forHousehold and Similar Purposes Part 1: GeneralRequirements First Edition; (CENELEC EN 60998-1: 1993)

IEC 60998-2-1 Connecting Devices for Low Voltage Circuits forHousehold and Similar Purposes Part 2-1: ParticularRequirements for Connecting Devices as SeparateEntities with Screw-Type Clamping Units FirstEdition; CENELEC EN 60998-2-1: 1993

IEC 60998-2-2 Connecting Devices for Low Voltage Circuits forHousehold and Similar Purposes Part 2-2: ParticularRequirements for Connecting Devices as SeparateEntities with Screwless-Type Clamping Units FirstEdition; (CENELEC EN 60998-2-2: 1993)

IEC 60998-2-3 Connecting Devices for Low Voltage Circuits forHousehold and Similar Purposes Part 2-3: ParticularRequirements for Connecting Devices as SeparateEntities with Insulation Piercing Clamping UnitsFirst Edition; (CENELEC EN 60998-2-3: 1993)

IEC 60998-2-4 Connecting Devices for Low-Voltage Circuits forHousehold and Similar Purposes Part 2-4: ParticularRequirements for Twist-On Connecting Devices FirstEdition; CENELEC EN 60998-2-4: 1993

IEC 60998-2-5 Connecting Devices for Low-Voltage Circuits forHousehold and Similar Purposes Part 2-5: ParticularRequirements for Connecting Boxes (Junction and/orTapping) for Terminals or Connecting Devices FirstEdition

IEC 60999 Connecting Devices - Safety Requirements for Screw-Type and Screwless-Type Clamping Units forElectrical Copper Conductors First Edition; CENELECEN 60999: 1993; Corrigendum-1995

IEC 60999-1 Connecting Devices - Safety Requirements for Screw-Type and Screwless-Type Clamping Units forElectrical Copper Conductors - Part 1: GeneralRequirements and Particular Requirements forConductors from 0,5 mm Squared up to 35 mm Squared (Included) First Edition; Corrigendum- 1995

IEC 60999-2 Connecting Devices - Safety Requirements for Screw-Type and Screwless-Type Clamping Units forElectrical Copper Conductors - Part 2: ParticularRequirements for Conductors from 35 mm2 up to 300mm2 First Edition

IEC 61000-1-1 Electromagnetic Compatibility (EMC) Part 1: GeneralSection 1: Application and Interpretation ofFundamental Definitions and Terms First Edition

IEC 61000-2-1 Electromagnetic Compatibility (EMC) Part 2: Environment Section 1: Description of theEnvironment - Electromagnetic Environment for Low-Frequency Conducted Disturbances and Signalling inPublic Power Supply Systems First Edition

IEC 61000-2-2 Electromagnetic Compatibility (EMC) Part 2:


Environment Section 2: Compatibility Levels forLow-Frequency Conducted Disturbances and Signallingin Public Low-Voltage Power Supply Systems FirstEdition; (CENELEC ENV 61000-2-2: 1993)

IEC 61000-2-3 Electromagnetic Compatibility (EMC) Part 2: Environment Section 3: Description of theEnvironment - Radiated and Non-Network-Frequency-Related Conducted Phenomena First Edition

IEC 61000-2-4 Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 4: Compatibility Levels inIndustrial Plants for Low-Frequency ConductedDisturbances First Edition; Corrigendum 08/1994; CENELEC EN 61000-2-4: 1994

IEC TR 61000-2-5 Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 5: Classification ofElectromagnetic Environments Basic EMC PublicationFirst Edition

IEC TR 61000-2-6 Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the EmissionLevels in the Power Supply of Industrial Plants asRegards Low-Frequency Conducted Disturbances FirstEdition

IEC TR 61000-2-7 Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 7: Low Frequency MagneticFields in Various Environments First Edition

IEC 61000-2-9 Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMPEnvironment - Radiated Disturbance Basic EMCPublication First Edition CENELEC EN 61 000-2-9: 1996

IEC 61000-3-2 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 2: Limits for Harmonic CurrentEmissions (Equipment Input Current Less Than orEqual to 16 A per Phase) First Edition; Corrigendum-1995; Corrigendum 2-1997; Amendment1-1997; Amendment 2-1998

IEC 61000-3-3 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of VoltageFluctuations and Flicker in Low Voltage SupplySystems for Equipment with Rated Current Less Thanor Equals to 16 A First Edition

IEC 61000-3-5 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 5: Limitation of VoltageFluctuations and Flicker in Low-Voltage PowerSupply Systems for Equipment with Rated CurrentGreater Than 16 A First Edition

IEC TR 61000-3-6 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 6: Assessment of Emission Limitsfor Distorting Loads in MV and HV Power Systems - Basic EMC Publication First Edition

IEC TR 61000-3-7 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 7: Assessment of Emission Limitsfor Fluctuating Loads in MV and HV Power Systems - Basic EMC Publication First Edition

IEC 61000-3-8 Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 8: Signalling on Low-VoltageElectrical Installations - Emission Levels, Frequency Bands and Electromagnetic DisturbanceLevels First Edition

IEC 61000-4-1 Electromagnetic Compatibility (EMC) Part 4: Testingand Measurement Techniques Section 1: Overview ofImmunity Tests Basic EMC Publication FirstEdition; (Corrigendum-1995) (CENELEC EN 61000-4-1: 1994)

IEC 61000-4-2 Electromagnetic Compatibility (EMC) Part 4: Testing


and Measurement Techniques - Section 2: Electrostatic Discharge Immunity Test Basic EMCPublication First Edition; Replaces IEC 801-2: 1991; Amendment 1-1998

IEC 61000-4-3 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 3: Radiated, Radio-Frequency, Electromagnetic FieldImmunity Test First Edition; Replaces IEC 801-3: 1984

IEC 61000-4-4 Electromagnetic Compatibility (EMC) Part 4: Testingand Measurement Techniques - Section 4: ElectricalFast Transient/Burst Immunity Test Basic EMCPublication First Edition; (CENELEC EN 61000-4-4: 1995)

IEC 61000-4-5 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 5: Surge Immunity Test First Edition; Corrigendum-1995

IEC 61000-4-6 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 6: Immunity to Conducted Disturbances, Induced byRadio-Frequency Fields First Edition; (Corrigendum-1996) CENELEC EN 61 000-4-6: 1996

IEC 61000-4-7 Electromagnetic Compatibility (EMC) Part 4: Testingand Measurement Techniques Section 7: General Guideon Harmonics and Interharmonics Measurements andInstrumentation, for Power Supply Systems andEquipment Connected Thereto First Edition; Corrigendum-1994; CENELEC EN 61000-4-7: 1993

IEC 61000-4-8 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 8: Power Frequency Magnetic Field Immunity Test BasicEMC Publication First Edition; (CENELEC EN61000-4-8: 1993)

IEC 61000-4-9 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 9: Pulse Magnetic Field Immunity Test Basic EMCPublication First Edition; (CENELEC EN 61000-4-9: 1993)

IEC 61000-4-10 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 10: Damped Oscillatory Magnetic Field Immunity TestBasic EMC Publication First Edition; (CENELEC EN61000-4-10: 1993)

IEC 61000-4-11 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measuring Techniques - Section 11: Voltage Dips, Short Interruptions and VoltageVariations Immunity Tests First Edition

IEC 61000-4-12 Electromagnetic Compatibility (EMC) Part 4: Testingand Measurement Techniques - Section 12: Oscillatory Waves Immunity Test Basic EMCPublication First Edition; CENELEC EN 61000-4-12: 1995

IEC 61000-4-15 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 15: Flickermeter - Functional and Design SpecificationsFirst Edition

IEC 61000-4-16 Electromagnetic Compatibility (EMC) - Part 4-16: Testing and Measurement Techniques - Test forImmunity to Conducted, Common Mode Disturbances inthe Frequency Range 0 Hz to 150 kHz First Edition

IEC 61000-4-24 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 24: Test Methods for Protective Devices for HEMPConducted Disturbance Basic EMC Publication FirstEdition


IEC TR 61000-5-1 Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines - Section1: General Considerations Basic EMC PublicationFirst Edition

IEC TR 61000-5-2 Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines - Section2: Earthing and Cabling First Edition

IEC TR 61000-5-4 Electromagnetic Compatibility (EMC) - Part 5: Installation and Mitigation Guidelines - Section4: Immunity to HEMP - Specifications for ProtectiveDevices Against HEMP Radiated Disturbance - BasicEMC Publication First Edition

IEC 61000-5-5 Electromagnetic Compatibility (EMC) Part 5: Installation and Mitigation Guidelines Section 5: Specification of Protective Devices for HEMPConducted Disturbance - Basic EMC Publication FirstEdition CENELEC EN 61 000-5-5: 1996

IEC 61000-6-1 Electromagnetic Compatibility (EMC) - Part 6: Generic Standards - Section 1: Immunity forResidential, Commercial and Light-IndustrialEnvironments First Edition

IEC 61000-6-4 Electromagnetic Compatability (EMC) - Part 6: Generic Standards - Section 4: Emission Standardfor Industrial Environments First Edition

IEC 61003-1 Industrial-Process Control Systems - Instrumentswith Analogue Inputs and Two- or Multi-StateOutputs Part 1: Methods of Evaluating thePerformance First Edition; CENELEC EN 61003-1: 1993

IEC 61005 Portable Neutron Ambient Dose Equivalent Ratemetersfor Use in Radiation Protection First Edition

IEC 61006 Methods of Test for the Determination of the GlassTransition Temperature of Electrical InsulatingMaterials First Edition; (CENELEC EN 61006:1993)

IEC 61007 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Measuring Methodsand Test Procedures Second Edition

IEC 61008-1 Residual Current Operated Circuit-Breakers withoutIntegral Overcurrent Protection for Household andSimilar Uses (RCCBs) - Part 1: General Rules SecondEdition

IEC 61008-2-1 Residual Current Operated Circuit-Breakers withoutIntegral Overcurrent Protection for Household andSimilar Uses (RCCB'S) Part 2-1: Applicability ofthe General Rules to RCCB's FunctionallyIndependent of Line Voltage First Edition; (CENELECEN 61008-2-1: 1994)

IEC 61008-2-2 Residual Current Operated Circuit-Breakers withoutIntegral Overcurrent Protection for Household andSimilar Uses (RCCB'S) Part 2-2: Applicability ofthe General Rules to RCCB's Functionally Dependenton Line Voltage First Edition

IEC 61009-1 Residual Current Operated Circuit-Breakers withIntegral Overcurrent Protection for Household andSimilar Uses (RCBOs) Part 1: General Rules SecondEdition

IEC 61009-2-1 Residual Current Operated Circuit-Breakers withIntegral Overcurrent Protection for Household andSimilar Uses (RCBO's) Part 2-1: Applicability ofthe General Rules to RCBO's FunctionallyIndependent of Line Voltage First Edition; CENELECEN 61009-2-1: 1994

IEC 61009-2-2 Residual Current Operated Circuit-Breakers withIntegral Overcurrent Protection for Household andSimilar Uses (RCBO's) Part 2-2: Applicability ofthe General Rules to RCBO's Functionally Dependent


on Line Voltage First Edition IEC 61010-1 Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory Use Part 1: General Requirements First Edition; (CENELEC EN61010-1: 1993) (Amendment 1-1992) (Replaces IEC348) (Amendment 2-1995)

IEC 61010-2-010 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use Part2-010: Particular Requirements for LaboratoryEquipment for the Heating of Materials FirstEdition; (Amendment 1-1996)

IEC 61010-2-020 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use Part2-020: Particular Requirements for LaboratoryCentrifuges First Edition; Amendment 1-1996

IEC 61010-2-031 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use Part2-031: Particular Requirements for Hand- Held PROBEASSEMBLIES for Electrical Measurement and TestFirst Edition

IEC 61010-2-032 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use - Part2-032: Particular Requirements for Hand-HeldCurrent Clamps for Electrical Measurement and TestFirst Edition

IEC 61010-2-041 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use Part2-041: Particular Requirements for Autoclaves UsingSteam for the Treatment of Medical Materials, andfor Laboratory Processes First Edition

IEC 61010-2-042 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use - Part2-042: Particular Requirements for Autoclaves andSterilizers Using Toxic Gas for the Treatment ofMedical Materials, and for Laboratory ProcessesFirst Edition

IEC 61010-2-043 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use - Part2-043: Particular Requirements for Dry HeatSterilizers Using Either Hot Air or Hot Inert Gasfor the Treatment of Medical Materials, and forLaboratory Processes First Edition

IEC 61010-2-051 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use Part2-051: Particular Requirements for LaboratoryEquipment for Mixing and Stirring First Edition; CENELEC EN 61 010-2-051: 1995

IEC 61010-2-061 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use Part2-061: Particular Requirements for LaboratoryAtomic Spectrometers with Thermal Atomization andIonization First Edition; (CENELEC EN 61010-2-061: 1996)

IEC 61010-3 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use - Part 3: Protocol for the Preparation of ConformityVerification Reports for the IEC 61010 Series FirstEdition

IEC TR 61010-3-1 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use - Part3-1: Conformity Verification Report for IEC 61010-1First Edition

IEC 61011 Electric Fence Energizers Safety Requirements forMains-Operated Electric Fence Energizers FirstEdition; Amendment 1-1991; Corrigendum 06/1993;


Amendment 2-1993; CENELEC EN 61011: 1992; CAN/CSA-IEC E1011-94

IEC 61011-1 Electric Fence Energizers Safety Requirements forBattery-Operated Electric Fence Energizers Suitablefor Connection to the Supply Mains First Edition; Amendment 2-1993, Incorporating Amendment 1; CENELEC EN 61011-1/A2: 1994; CAN/CSA-IEC E1011-1-94

IEC 61011-2 Electric Fence Energizers Safety Requirements forBattery-Operated Electric Fence Energizers Not forConnection to the Supply Mains First Edition; Amendment 2-1993, Incorporating Amendment 1; CENELEC EN 61011-2/A2; CAN/CSA-IEC E1011-2-94

IEC 61012 Filters for the Measurement of Audible Sound in thePresence of Ultrasound First Edition

IEC 61014 Programmes for Reliability Growth First Edition IEC 61015 Brush-Holders for Electrical Machines Guide to the

Measurement of the Static Thrust Applied to BrushesFirst Edition

IEC 61016 Helical-Scan Digital Component Video CassetteRecording System Using 19 mm Magnetic Tape (FormatD-1) First Edition

IEC 61017-1 Portable, Transportable or Installed X or GammaRadiation Ratemeters for Environmental MonitoringPart 1: Ratemeters First Edition

IEC 61017-2 Radiation Protection Instrumentation - Portable, Transportable or Installed Equipment to Measure Xor Gamma Radiation for Environmental Monitoring - Part 2: Integrating Assemblies First Edition

IEC 61018 High Range Beta and Photon Dose and Dose RatePortable Instruments for Emergency RadiationProtection Purposes First Edition

IEC 61019-1-1 Surface Acoustic Wave (SAW) Resonators Part 1: General Information, Standard Values and TestConditions Section 1 - General Information andStandard Values First Edition

IEC 61019-1-2 Surface Acoustic Wave (SAW) Resonators Part 1: General Information, Standard Values and TestConditions Section 2: Test Conditions First Edition

IEC 61019-2 Surface Acoustic Wave (SAW) Resonators - Part 2: Guide to the Use First Edition

IEC 61019-3 Surface Acoustic Wave (SAW) Resonators Part 3: Standard Outlines and Lead Connections FirstEdition

IEC 61020-1 Electromechanical Switches for Use in ElectronicEquipment Part 1: Generic Specification; (IECQ QC960000)

IEC 61020-2 Electromechanical Switches for Use in ElectronicEquipment Part 2: Sectional Specification forRotary Switches; First Edition; (IECQ QC 960100)

IEC 61020-2-1 Electromechanical Switches for Use in ElectronicEquipment Part 2: Sectional Specification forRotary Switches Section 1 - Blank DetailSpecification First Edition; (IECQ QC 960101)

IEC 61020-2-2 Electromechanical Switches for Use in ElectronicEquipment - Part 2: Sectional Specification forRotary Switches - Section 2: Detail Specificationfor Rotary Switches with Central Mounting, 12Positions, 17 mm Diameter First Edition; IECQ QC960101XX0001

IEC 61020-3 Electromechanical Switches for Use in ElectronicEquipment Part 3: Sectional Specification for In-Line Package Switches First Edition; (IECQ QC960500)

IEC 61020-3-1 Electromechanical Switches for Use in Electronic


Equipment Part 3: Sectional Specification for In-Line Package Switches Section 1 - Blank DetailSpecification First Edition; IECQ QC 960501

IEC 61020-3-2 Electromechanical Switches for Use in ElectronicEquipment Part 3: Sectional Specification for In-Line Package Switches Section 2: DetailSpecification for Dual In-Line Package (DIP), Switches, Raised and Recessed Rocker Actuated FirstEdition; IECQ QC 960501XX0001

IEC 61020-4 Electromechanical Switches for Use in ElectronicEquipment Part 4: Sectional Specification forLever (Toggle) Switches First Edition; (IECQ QC960200)

IEC 61020-4-1 Electromechanical Switches for Use in ElectronicEquipment Part 4: Sectional Specification forLever (Toggle) Switches Section 1 - Blank DetailSpecification First Edition; (IECQ QC 960201)

IEC 61020-4-2 Electromechanical Switches for Use in ElectricalEquipment - Part 4: Sectional Specification forLever (Toggle) Switches Section 2: DetailSpecification for One Pole, Two Pole, Four Pole, Sealed Lever (Toggle) Switches, 277 V A.C. Maximum, 30 V D.C. Maximum, 20 A Maximum ElectricalRating First Edition; IECQ QC 960201XX0001

IEC 61020-5 Electromechanical Switches for Use in ElectronicEquipment Part 5: Sectional Specification forPushbutton Switches First Edition; (IECQ QC 960400)

IEC 61020-5-1 Electromechanical Switches for Use in ElectronicEquipment Part 5: Sectional Specification forPushbutton Switches Section 1 - Blank DetailSpecification First Edition; (IECQ QC 960401)

IEC 61020-6 Electromechanical Switches for Use in ElectronicEquipment Part 6: Sectional Specification forSensitive Switches First Edition; (IECQ QC 960300)

IEC 61020-6-1 Electromechanical Switches for Use in ElectronicEquipment Part 6: Sectional Specification forSensitive Switches Section 1 - Blank DetailSpecification First Edition; (IECQ QC 960301)

IEC 61020-6-2 Electromechanical Switches for Use in ElectronicEquipment - Part 6: Sectional Specification forSensitive Switches - Section 2: DetailSpecification for One Pole, Unsealed SubminiatureSensitive Switches, 250 V Maximum Electrical RatingFirst Edition; (IECQ QC 960301XX0001)

IEC 61021-1 Laminated Core Packages for Transformers andInductors Used in Telecommunication and ElectronicEquipment Part 1: Dimensions First Edition

IEC 61021-2 Laminated Core Packages for Transformers andInductors for Use in Telecommunication andElectronic Equipment - Part 2: ElectricalCharacteristics for Cores Using YEE 2 LaminationsFirst Edition

IEC 61022 Interconnection of Radio and TV Receivers to FeederSystem Outlets First Edition

IEC 61023 Marine Speed and Distance Measuring Equipment (SDME) Operational and Performance Requirements - Methods of Testing and Required Test ResultsFirst Edition; (CENELEC EN 61023:1993)

IEC 61024-1 Protection of Structures Against Lightning Part 1: General Principles First Edition; CENELEC ENV61024-1: 1995

IEC 61024-1-1 Protection of Structures Against Lightning Part 1: General Principles Section 1: Guide A - Selectionof Protection Levels for Lightning ProtectionSystems First Edition


IEC 61024-1-2 Protection of Structures Against Lightning Part1-2: General Principles - Guide B - Design, Installation, Maintenance and Inspection ofLightning Protection Systems First Edition

IEC 61025 Fault Tree Analysis (FTA) First Edition IEC 61026 Guidelines for Application of Analytical Test

Methods for Thermal Endurance Testing of ElectricalInsulating Materials First Edition

IEC 61027 Instruments for the Measurement of Aural AcousticImpedance/ Admittance First Edition; (CENELEC EN61027:1993)

IEC 61028 Electrical Measuring Instruments - X-Y RecordersFirst Edition; Amendment 1-1995; Amendment 2-1997

IEC 61029-1 Safety of Transportable Motor-Operated ElectricTools Part 1: General Requirements First Edition; CAN/CSA-IEC E1029-1-94; CENELEC EN 61029-1: 1995

IEC 61029-2-1 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for CircularSaws First Edition; CAN/CSA-IEC E1029-2-1-94

IEC 61029-2-2 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for RadialArm Saws First Edition; CAN/CSA-IEC E1029-2-2-94

IEC 61029-2-3 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for Planersand Thicknessers First Edition; CAN/CSA-IECE1029-2-3-94

IEC 61029-2-4 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for BenchGrinders First Edition; CAN/CSA-IEC E1029-2-4-94

IEC 61029-2-5 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for Band SawsFirst Edition; CAN/CSA-IEC E1029-2-5-94

IEC 61029-2-6 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for DiamondDrills with Water Supply First Edition; CAN/CSA-IECE1029-2-6-94

IEC 61029-2-7 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for DiamondSaws with Water Supply First Edition; CAN/CSA-IECE1029-2-7-94

IEC 61029-2-8 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for SingleSpindle Vertical Moulders First Edition

IEC 61029-2-9 Safety of Transportable Motor-Operated ElectricTools Part 2: Particular Requirements for MitreSaws First Edition

IEC 61029-2-10 Safety of Transportable Motor-Operated ElectricTools - Part 2-10: Particular Requirements forCutting-Off Grinders First Edition; To be Used inConjunction with the IEC 61029-1

IEC 61030 Audio, Video and Audiovisual Systems DomesticDigital Bus (D2B) First Edition; Amendment 1-1993; CENELEC EN 61030: 1993

IEC 61031 Design, Location and Application Criteria forInstalled Area Gamma Radiation Dose Rate MonitoringEquipment for Use in Nuclear Power Plants DuringNormal Operation and Anticipated OperationalOccurrences First Edition

IEC 61032 Protection of Persons and Equipment by Enclosures - Probes for Verification Second Edition

IEC 61033 Test Methods for the Determination of Bond Strengthof Impregnating Agents to an Enamelled WireSubstrate First Edition; Replaces IEC 290: 1969 andIEC 699: 1981


IEC 61034-1 Measurement of Smoke Density of Cables BurningUnder Defined Conditions - Part 1: Test ApparatusSecond Edition

IEC 61034-2 Measurement of Smoke Density of Electric CablesBurning under Defined Conditions - Part 2: TestProcedure and Requirements Second Edition

IEC 61035-1 Specification for Conduit Fittings for ElectricalInstallations Part 1: General Requirements FirstEdition

IEC 61035-2-1 Specification for Conduit Fittings for ElectricalInstallations - Part 2: Particular Specifications - Section 1: Metal Conduit Fittings First Edition

IEC 61035-2-2 Specification for Conduit Fittings for ElectricalInstallations - Part 2: Particular Specifications - Section 2: Conduit Fittings of InsulatingMaterial First Edition

IEC 61035-2-3 Specification for Conduit Fittings for ElectricalInstallations Part 2: Particular SpecificationsSection 3: Fittings for Flexible Conduits ofMetal, Insulating or Composite Materials and forPliable Conduits of Metal or Composite MaterialsFirst Edition

IEC 61035-2-4 Specification for Conduit Fittings for ElectricalInstallations Part 2: Particular SpecificationsSection 4: Conduit Fittings of Aluminium AlloyFirst Edition

IEC 61036 Alternating Current Static Watt-Hour Meters forActive Energy (Classes 1 and 2) Second Edition

IEC 61037 Electronic Ripple Control Receivers for Tariff andLoad Control First Edition; Amendment 1-1996; Amendment 2-1998

IEC 61038 Time Switches for Tariff and Load Control FirstEdition; (CENELEC EN 61038: 1992) (Amendment1-1996) CENELEC EN 61 038: 1992

IEC 61039 General Classification of Insulating Liquids FirstEdition

IEC 61040 Power and Energy Measuring Detectors, Instrumentsand Equipment for Laser Radiation First Edition; CENELEC EN 61040: 1992

IEC 61041-1 Non-Broadcast Video Tape Recorders - Methods ofMeasurement Part 1: General Video (NTSC/PAL) andAudio (Longitudinal) Characteristics First Edition (CENELEC EN 61041-1: 1995)

IEC 61041-2 Non-Broadcast Video Tape Recorders - Methods ofMeasurement - Part 2: Video CharacteristicsChrominance SECAM First Edition; CENELEC EN 61041-2: 1996

IEC 61041-3 Non-Broadcast Videotape Recorders - Methods ofMeasurement - Part 3: Audio Characteristics for FMRecording First Edition (CENELEC EN 61041-3: 1995)

IEC 61041-4 Non-Broadcast Video Tape Recorders - Methods ofMeasurement - Part 4: Calibration Tape (NTSC/PAL/SECAM) First Edition

IEC 61041-5 Non-Broadcast Video Tape Recorders - Methods ofMeasurement - Part 5: High-Band Video TapeRecorders, Including Those Equipped with Y/C VideoConnectors (NTSC/PAL) First Edition

IEC 61042 Method for Calculating Reduction Factors for Groupsof Cables in Free Air, Protected from SolarRadiation First Edition; Replaced by IEC 287-2-2: 1995

IEC 61043 Electroacoustics - Instruments for the Measurementof Sound Intensity - Measurement with Pairs ofPressure Sensing Microphones First Edition;


(CENELEC EN 61043:1994) IEC 61044 Opportunity-Charging of Lead-Acid Traction

Batteries First Edition IEC 61045-1 Fixed Film Resistor Networks for Use in Electronic

Equipment Part 1: Generic Specification FirstEdition; (IECQ QC 390000)

IEC 61045-2 Fixed Film Resistor Networks for Use in ElectronicEquipment Part 2: Sectional Specification for FilmResistor Networks of Assessed Quality on the Basisof the Capability Approval Procedure FirstEdition; (IECQ QC 390100)

IEC 61045-2-1 Fixed Film Resistor Networks for Use in ElectronicEquipment Part 2: Blank Detail Specification forFilm Resistor Networks of Assessed Quality on theBasis of the Capability Approval ProcedureAssessment Level E First Edition; (IECQ QC 390101)

IEC 61046 D.C. or A.C. Supplied Electronic Step-DownConvertors for Filament Lamps General and SafetyRequirements Second Edition; CENELEC EN 610461994; Amendment 1-1995

IEC 61047 D.C. or A.C. Supplied Electronic Step-DownConvertors for Filament Lamps PerformanceRequirements First Edition; CENELEC EN 61047:1992; Amendment 1-1996

IEC 61048 Capacitors for Use in Tubular Fluorescent and OtherDischarge Lamp Circuits General and SafetyRequirements First Edition; CENELEC EN 61048: 1993; Amendment 1-1995

IEC 61049 Capacitors for Use in Tubular Fluorescent and OtherDischarge Lamp Circuits Performance RequirementsFirst Edition; CENELEC EN 61049: 1993

IEC 61050 Transformers for Tubular Discharge Lamps Having aNo-Load Output Voltage Exceeding 1 000 V (GenerallyCalled Neon-Transformers) General and SafetyRequirements First Edition; Corrigendum 03/1992; Amendment 1-1994

IEC 61051-1 Varistors for Use in Electronic Equipment Part 1: Generic Specification First Edition; IECQ QC 420000

IEC 61051-2 Varistors for Use in Electronic Equipment Part 2: Sectional Specification for Surge SuppressionVaristors First Edition; (IECQ QC 420100)

IEC 61051-2-1 Varistors for Use in Electronic Equipment Part 2: Blank Detail Specification for Silicon CarbideSurge Suppression Varistors - Assessment Level EFirst Edition; (IECQ QC 420101)

IEC 61051-2-2 Varistors for Use in Electronic Equipment Part 2: Blank Detail Specification for Zinc Oxide SurgeSuppression Varistors - Assessment Level E FirstEdition; (IECQ QC 420102)

IEC 61052 IEC 1052 FASTBUS STANDARD ROUTINES StandardRoutines for Use with FASTBUS Data AcquisitionSystem First Edition

IEC 61053-1 Helical-Scan Video Tape Cassette System Using 12,65mm (0,5 in) Magnetic Tape on Type Beta Format - FMAudio Recording Part 1: 625 Line-50 Field SystemsFirst Edition

IEC 61053-2 Helical-Scan Video Tape Cassette System Using 12,65mm (0,5 in) Magnetic Tape on Type Beta Format - FMAudio Recording Part 2: 525 Line-60 Field SystemsFirst Edition

IEC 61054 Helical-Scan Video Tape Cassette System Using 12,65mm (0,5 in) Magnetic Tape on Type VHS - FM AudioRecording First Edition; CENELEC EN 61054: 1993

IEC 61055-1 Measurement Techniques and Operational Adjustments


of Broadcast VTRs Part 1: Operational Adjustmentson Analogue Composite Broadcast VTRs First Edition

IEC 61055-2 Measurement Techniques and Operational Adjustmentsof Broadcast VTRs Part 2: Special MechanicalMeasurements and Alignments First Edition

IEC 61056-1 Portable Lead-Acid Cells and Batteries (Valve-Regulated Types) Part 1: General Requirements, Functional Characteristics - Methods of Test FirstEdition; CENELEC EN 61056-1: 1993

IEC 61056-2 Portable Lead-Acid Cells and Batteries (Valve-Regulated Types)- Part 2: Dimensions, Terminals andMarking First Edition

IEC 61056-3 Portable Lead-Acid Cells and Batteries (Valve-Regulated Types) Part 3: Safety Recommendations forUse in Electric Appliances First Edition

IEC 61057 Aerial Devices with Insulating Boom Used for LiveWorking First Edition; (CENELEC EN 61057:1993)

IEC 61058-1 Switches for Appliances Part 1: GeneralRequirements Second Edition; Amendment 1-1997

IEC 61058-2-1 Switches for Appliances Part 2-1: ParticularRequirements for Cord Switches First Edition; (CENELEC EN 61058-2-1: 1993) (Amendment 1-1995)

IEC 61058-2-4 Switches for Appliances - Part 2-4: ParticularRequirements for Independently Mounted SwitchesFirst Edition

IEC 61058-2-5 Switches for Appliances Part 2-5: ParticularRequirements for Change-Over Selectors FirstEdition; CENELEC EN 61058-2-5: 1994

IEC 61061-1 Non-Impregnated Densified Laminated Wood forElectrical Purposes - Part 1: Definitions, Designation and General Requirements Second Edition

IEC 61061-2 Specification for Non-Impregnated, DensifiedLaminated Wood for Electrical Purposes Part 2: Methods of Test First Edition

IEC 61062 Audiovisual Equipment and Systems - Rating Plates - Marking of Electricity Supply First Edition; (ANSI IT7.105-1992)

IEC 61063 Acoustics - Measurement of Airborne Noise Emittedby Steam Turbines and Driven Machinery FirstEdition; CENELEC EN 61 063: 1996

IEC 61064 Acceptance Tests for Steam Turbine Speed ControlSystems First Edition; (CENELEC EN 61064:1993)

IEC 61065 Method for Evaluating the Low Temperature FlowProperties of Mineral Insulating Oils After AgeingFirst Edition; CENELEC EN 61065:1993; Corrigendum12/1993

IEC 61066 Thermoluminescence Dosimetry Systems for Personaland Environmental Monitoring First Edition

IEC 61067-1 Specification for Glass and Glass Polyester FibreWoven Tapes Part 1: Definitions, Classification andGeneral Requirements First Edition

IEC 61067-2 Specification for Glass and Glass Polyester FibreWoven Tapes Part 2: Methods of Test First Edition

IEC 61067-3-1 Glass and Glass Polyester Fibre Woven Tapes - Part3: Specifications for Individual Materials - Sheet1: Type 1, 2 and 3 Tapes First Edition; CENELEC EN61067-3-1: 1995

IEC 61068-1 Specification for Polyester Fibre Woven Tapes Part1: Definitions, Designation and GeneralRequirements First Edition

IEC 61068-2 Specification for Polyester Fibre Woven Tapes Part2: Methods of Test First Edition

IEC 61068-3-1 Polyester Fibre Woven Tapes Part 3: Specificationsfor Individual Materials Sheet 1: Tapes Woven on


Conventional or Shuttleless Looms Second Edition; Corrigendum-1998

IEC 61069-1 Industrial-Process Measurement and Control - Evaluation of System Properties for the Purposeof System Assessment Part 1: General Considerationsand Methodology First Edition; (CENELEC EN61069-1: 1993)

IEC 61069-2 Industrial-Process Measurement and Control - Evaluation of System Properties for the Purposeof System Assessment Part 2: Assessment MethodologyFirst Edition

IEC 61069-3 Industrial-Process Measurement and Control - Evaluation of System Properties for the Purposeof System Assessment - Part 3: Assessment of SystemFunctionality First Edition

IEC 61069-4 Industrial Process Measurement and Control - Evaluation of System Properties for the Purposeof System Assessment - Part 4: Assessment of SystemPerformance First Edition; Corrigendum- 1997

IEC 61069-5 Industrial-Process Measurement and Control - Evaluation of System Properties for the Purposeof System Assessment - Part 5: Assessment of SystemDependability First Edition (CENELEC EN 61069-5: 1995)

IEC 61069-6 Industrial Process Measurement and Control - Evaluation of System Properties for the Purposeof System Assessment - Part 6: Assessment of SystemOperability First Edition

IEC 61070 Compliance Test Procedures for Steady-StateAvailability First Edition

IEC 61071-1 Power Electronic Capacitors Part 1: General FirstEdition

IEC 61071-2 Power Electronic Capacitors - Part 2: Requirementsfor Disconnecting Test on Fuses, Destruction Test, Self-Healing Test and Endurance Test FirstEdition; CENELEC EN 61071-2: 1996

IEC 61072 Methods of Test for Evaluating the Resistance ofInsulating Materials Against the Initiation ofElectrical Trees First Edition

IEC 61073-1 Splices for Optical Fibres and Cables Part 1: Generic Specification Second Edition; (IECQ QC850000)

IEC 61073-2 Splices for Optical Fibres and Cables Part 2: Sectional Specification - Splice Organizers andClosures for Optical Fibres and Cables FirstEdition; (IECQ QC 850100)

IEC 61073-3 Splices for Optical Fibres and Cables Part 3: Sectional Specification - Fusion Splices forOptical Fibres and Cables First Edition; (IECQ QC850200)

IEC 61073-4 Splices for Optical Fibres and Cables - Part 4: Sectional Specification - Mechanical Splices forOptical Fibres and Cables First Edition; (IECQ QC850300)

IEC 61074 Determination of Heats and Temperatures of Meltingand Crystallization of Electrical InsulatingMaterials by Differential Scanning CalorimetryFirst Edition; (CENELEC EN 61074:1993)

IEC 61075 Loran-C Receivers for Ships Minimum PerformanceStandards - Methods of Testing and Required TestResults First Edition; (CENELEC EN 61075:1993)

IEC 61076-1 Connectors with Assessed Quality, for Use in D.C., Low Frequency Analogue and in Digital High SpeedData Applications - Part 1: Generic Specification


First Edition; (IECQ QC 480000) (Corrigendum-1995) (CENELEC EN 61 076-1: 1995) (Amendment 1-1996)

IEC 61076-3-101 Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High-SpeedData Applications - Part 3: Rectangular Connectors - Section 101: Detail Specification for a Range ofShielded Connectors with Trapezoidal Shaped Shellsand Non-Removable Rectangular Contacts on a 1,27 mmx 2,54 mm Centre-Line First Edition; IECQ QC480201XX0002

IEC 61076-4 Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High-SpeedData Applications - Part 4: SectionalSpecification - Printed Board Connectors FirstEdition; IECQ QC 480300

IEC 61076-4-001 Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High-SpeedData Applications - Part 4: Printed BoardConnectors - Section 001: Blank DetailSpecification First Edition; IECQ QC 480301

IEC 61076-4-100 Connectors with Assessed Quality for Use in D.C. and Low Frequency Analogue Applications and inDigital Applications with High Speed Data Rates - Part 4: Printed Board Connectors - Section 100: Detail Specification for Two-Part Connector ModulesHaving a Grid of 2,5 mm (0,098 in) for PrintedBoards and Backplanes First Edition; IECQ QC480301/XX 0001

IEC 61076-4-101 Connectors with Assessed Quality, for Use in D.C. Low-Frequency Analogue and in Digital High SpeedData Applications - Part 4: Printed BoardConnectors - Section 101: Detail Specification forTwo-Part Connector Modules Having a Basic Grid of2,0 mm for Printed Boards and Backplanes inAccordance with IEC 917 First Edition; IECQ QC480301XX0002)

IEC 61076-4-102 Connectors with Assessed Quality for Use in d.c., Low-Frequency Analogue and in Digital High SpeedData Applications - Part 4: Printed BoardConnectors - Section 102: Detail Specification forTwo-Part Single-Pole Connectors, for Multiple Useson Plug-In Units, with Pre-Centring, Coding andEarly Mating Features, Having a Metric Grid inAccordance with IEC 60917 First Edition; IECQ QC480301XX0003

IEC 61076-4-105 Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High SpeedData Applications - Part 4: Printed BoardConnectors - Section 105: Detail Specification for9 mm Circular Connector with 3 to 8 Contacts forUse in a Wide Range of Applications Including theTelecommunication and Audio Industry FirstEdition; IECQ QC 480301XX0006

IEC 61077 Helical-Scan Video Tape Cassette System Using 12,65mm (0,5 in) Magnetic Tape on Type VHS - Compact VHSVideo Cassette First Edition

IEC 61078 Analysis Techniques for Dependability - ReliabilityBlock Diagram Method First Edition; (CENELEC EN61078:1993)

IEC 61079-1 Methods of Measurement on Receivers for SatelliteBroadcast Transmissions in the 12 GHz Band Part 1: Radio-Frequency Measurements on Outdoor Units FirstEdition

IEC 61079-2 Methods of Measurement on Receivers for SatelliteBroadcast Transmissions in the 12 GHz Band Part 2:


Electrical Measurements on DBS Tuner Units FirstEdition

IEC 61079-3 Methods of Measurement on Receivers for SatelliteBroadcast Transmissions in the 12 GHz Band Part 3: Electrical Measurements of Overall Performance ofReceiver Systems Comprising an Outdoor Unit and aDBS Tuner Unit First Edition

IEC 61079-4 Methods of Measurement on Receivers for SatelliteBroadcast Transmissions in the 12 GHz Band Part 4: Electrical Measurements on Sound/Data Decoder Unitsfor the Digital Subcarrier NTSC System

IEC 61079-5 Methods of Measurement on Receivers for SatelliteBroadcast Transmissions in the 12 GHz Band Part 5: Electrical Measurements on Decoder Units for MAC/Packet Systems First Edition

IEC 61080 Guide to the Measurement of Equivalent ElectricalParameters of Quartz Crystal Units First Edition

IEC 61081 Pneumatic Instruments Driven by Associated ProcessGas - Safe Installation and Operating Procedures - Guidelines First Edition

IEC 61082-1 Preparation of Documents Used in Electrotechnology - Part 1: General Requirements First Edition (CENELEC EN 61082-1:1993); (Corrigendum-Nov 1993), (Amendment 1-1995), (Amendment 2-1996) (AS/NZS4383.1:1996)

IEC 61082-2 Preparation of Documents Used in ElectrotechnologyPart 2: Function-Oriented Diagrams First Edition; (CENELEC EN 61082-2: 1994) (Replaces 113 Pt 1,3,4, 5,6,7, and 8) (AS/NZS 4383.2:1996)

IEC 61082-3 Preparation of Documents Used in Electrotechnology - Part 3: Connection Diagrams, Tables and ListsFirst Edition; CENELEC EN 61082-3: 1994; AS/NZS4383.3: 1996

IEC 61082-4 Preparation of Documents Used in Electrotechnology - Part 4: Location and Installation Documents FirstEdition; CENELEC EN 61082-4: 1996

IEC TR 61082-6 Preparation of Documents Used in Electrotechnology - Part 6: Index First Edition

IEC 61083-1 Digital Recorders for Measurements in High-VoltageImpulse Tests Part 1: Requirements for DigitalRecorders First Edition; (CENELEC EN 61083-1: 1993)

IEC 61083-2 Digital Recorders for Measurements in High-VoltageImpulse Tests - Part 2: Evaluation of Software Usedfor the Determination of the Parameters of ImpulseWaveforms First Edition

IEC 61084-1 Cable Trunking and Ducting Systems for ElectricalInstallations Part 1: General Requirements FirstEdition; (Amendment 1-1993)

IEC 61084-2-1 Cable Trunking and Ducting Systems for ElectricalInstallations - Part 2: Particular Requirements - Section 1: Cable Trunking and Ducting SystemsIntended for Mounting on Walls or Ceilings FirstEdition

IEC 61084-2-4 Cable Trunking and Ducting Systems for ElectricalInstallations - Part 2: Particular Requirements - Section 4: Service Poles First Edition

IEC 61085 General Considerations for TelecommunicationServices for Electric Power Systems First Edition

IEC 61086-1 Specification for Coatings for Loaded Printed WireBoards (Conformal Coatings) Part 1: Definitions, Classification and General Requirements FirstEdition; CENELEC EN 61086-1: 1994

IEC 61086-2 Specification for Coatings for Loaded Printed WireBoards (Conformal Coatings) Part 2: Methods of Test


First Edition; CENELEC EN 61086-2: 1994 IEC 61086-3-1 Coatings for Loaded Printed Wire Boards (Conformal

Coatings) - Part 3: Specifications for IndividualMaterials - Sheet 1: Coatings for General Purpose (Class I) and for High Reliability (Class II) FirstEdition

IEC 61087 Guide for Evaluating the Discharges from a ChargedSurface First Edition

IEC 61088 Characteristics and Measurements of UltrasonicPiezoceramic Transducers First Edition

IEC 61089 Round Wire Concentric Lay Overhead ElectricalStranded Conductors First Edition; Amendment 105-1997

IEC 61094-1 Measurement Microphones Part 1: Specifications forLaboratory Standard Microphones First Edition; Corrigendumv 02/1993; EN 61094-1: 1994

IEC 61094-2 Measurement Microphones Part 2: Primary Method forPressure Calibration of Laboratory StandardMicrophones by the Reciprocity Technique FirstEdition; CENELEC EN 61094-2: 1993

IEC 61094-3 Measurement Microphone Part 3: Primary Method forFree-Field Calibration of Laboratory StandardMicrophones by the Reciprocity Technique FirstEdition; CENELEC EN 61 094-3: 1995

IEC 61094-4 Measurement Microphones Part 4: Specifications forWorking Standard Microphones First Edition; CENELECEN 61 094-4: 1995

IEC 61095 Electromechanical Contactors for Household andSimilar Purposes First Edition; (CENELEC EN61095:1993)

IEC 61096 Methods of Measuring the Characteristics ofReproducing Equipment for Digital Audio CompactDiscs First Edition; (CENELEC EN 61096: 1993) (Amendment 1-1996)

IEC 61097-1 Global Maritime Distress and Safety System (GMDSS) - Part 1: Radar Transponder - Marine Search andRescue (SART) - Operational and PerformanceRequirements, Methods of Testing and Required TestResults First Edition

IEC 61097-2 Global Maritime Distress and Safety System (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite EmergencyPosition Indicating Radio Beacon Operating on 406MHz - Operational and Performance Requirements, Methods of Testing and Required Test Results FirstEdition

IEC 61097-3 Global Maritime Distress and Safety System (GMDSS) - Part 3: Digital Selective Calling (DSC) Equipment - Operational and PerformanceRequirements, Methods of Testing and RequiredTesting Results First Edition

IEC 61097-4 Global Maritime Distress and Safety System (GMDSS) - Part 4: INMARSAT-C Ship Earth Station andINMARSAT Enhanced Group Call (EGC) Equipment - Operational and Performance Requirements, Methodsof Testing and Required Test Results First Edition

IEC 61097-5 Global Maritime Distress and Safety System (GMDSS) - Part 5: Inmarsat-E - Emergency PositionIndicating Radio Beacon (EPIRB) Operating Throughthe Inmarsat System - Operational and PerformanceRequirements, Methods of Testing and Required TestResults First Edition

IEC 61097-6 Global Maritime Distress and Safety System (GMDSS) - Part 6: Narrowband Direct- Printing TelegraphEquipment for the Reception of Navigational andMeteorological Warnings and Urgent Information to


Ships (NAVTEX) - Operational and PerformanceRequirements, Methods of Testing and Required TestResults First Edition

IEC 61097-7 Global Maritime Distress and Safety System (GMDSS) - Part 7: Shipborne VHF Radiotelephone Transmitterand Receiver - Operational and PerformanceRequirements, Methods of Testing and Required TestResults First Edition

IEC 61097-9 Global Maritime Distress and Safety System (GMDSS) - Part 9: Shipborne Transmitters and Receivers forUse in MF and HF Bands Suitable for Telephony, Digital Selective Calling (DSC) and Narrow BandDirect Printing (NBDP) - Operational andPerformance Requirements, Methods of Testing andRequired Test Results First Edition

IEC 61097-12 Global Maritime Distress and Safety System (GMDSS) - Part 12: Survival Craft Portable Two-Way VHFRadiotelephone Apparatus - Operational andPerformance Requirements, Methods of Testing andRequired Test Results First Edition

IEC 61098 Installed Personnel Surface ContaminationMonitoring Assemblies for Alpha and Beta EmittersFirst Edition

IEC 61099 Specifications for Unused Synthetic Organic Estersfor Electrical Purposes First Edition; (CENELEC EN61099:1992) (Corrigendum-Dec 1993)

IEC 61100 Classification of Insulating Liquids According toFire-Point and Net Calorific Value First Edition

IEC 61101 Absolute Calibration of Hydrophones Using thePlanar Scanning Technique in the Frequency Range0,5 MHz to 15 MHz First Edition; (CENELEC EN61101:1993)

IEC 61102 Measurement and Characterisation of UltrasonicFields Using Hydrophones in the Frequency Range 0,5MHz to 15 MHz First Edition; (Amendment 1-1993) (CENELEC EN 61102:1993)

IEC 61104 Compact Disc Video System - 12 cm CD-V FirstEdition; (CENELEC EN 61104:1992)

IEC 61105 Reference Tapes for Video Tape Recorder SystemsFirst Edition; CENELEC EN 61105: 1993

IEC 61106 Videodisks - Methods of Measurement for ParametersFirst Edition; (CENELEC EN 61106:1993)

IEC 61107 Data Exchange for Meter Reading, Tariff and LoadControl - Direct Local Data Exchange SecondEdition; CENELEC EN 61107: 1996

IEC 61108-1 Global Navigation Satellite Systems (GNSS) - Part1: Global Positioning System (GPS) - ReceiverEquipment - Performance Standards, Methods ofTesting and Required Test Results First EditionCENELEC EN 61 108-1: 1996

IEC 61108-2 Maritime Navigation and RadiocommunicationEquipment and Systems - Global Navigation SatelliteSystems (GNSS) - Part 2: Global NavigationSatellite System (GLONASS) - Receiver Equipment - Performance Standards, Methods of Testing andRequired Test Results First Edition

IEC 61109 Composite Insulators for A.C. Overhead Lines with aNominal Voltage Greater Than 1 000 V - Definitions, Test Methods and Acceptance CriteriaFirst Edition; Amendment 1-1995

IEC 61110 System Omega and Differential Omega Receivers forShips - Operational and Performance Requirements - Methods of Testing and Required Test ResultsFirst Edition

IEC 61111 Matting of Insulating Material for Electrical


Purposes First Edition IEC 61112 Blankets of Insulating Material for Electrical

Purposes First Edition IEC 61114-1 Methods of Measurement on Receiving Antennas for

Satellite Broadcast Transmissions in the 12 GHzBand Part 1: Electrical Measurements on DBSReceiving Antennas First Edition; (CENELEC EN61114-1: 1993)

IEC 61114-2 Methods of Measurement on Receiving Antennas forSatellite Broadcast Transmission in the 11/12 GHzBand - Part 2: Mechanical and Environmental Testson Individual and Collective Receiving AntennasFirst Edition

IEC 61115 Expression of Performance of Sample HandlingSystems for Process Analyzers First Edition; (CENELEC EN 61115:1993)

IEC 61116 Electromechanical Equipment Guide for SmallHydroelectric Installations First Edition; CENELECEN 61116: 1994

IEC 61117 Method for Assessing the Short-Circuit WithstandStrength of Partially Type-Tested Assemblies (PTTA) First Edition

IEC 61118 Helican-Scan Video Type Cassette System Using 12,65mm (0,5 in) Magnetic Tape - Type M2 First Edition; (CENELEC EN 61118:1993)

IEC 61119-1 Digital Audio Tape Cassette System (DAT) Part 1: Dimensions and Characteristics First Edition

IEC 61119-2 Digital Audio Tape Cassette System Part 2: DATCalibration Tape First Edition; CENELEC EN61119-2: 1994

IEC 61119-3 Digital Audio Tape Cassette System (DAT) Part 3: DAT Tape Properties First Edition; CENELEC EN1119-3: 1994

IEC TR 61119-4 Digital Audio Tape (DAT) Cassette System - Part 4: Character Pack Format First Edition

IEC 61119-5 Digital Audio Tape Cassette System (DAT) Part 5: DAT for Professional Use First Edition; CEN EN6119-5: 1995

IEC 61119-6 Digital Audio Tape Cassette System (DAT) Part 6: Serial Copy Management System First Edition

IEC 61119-7 Digital Audio Tape Cassette System (DAT) - Part 7: DAT Logo Application Rule First Edition

IEC 61120-1 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional UsePart 1: General Requirements First Edition; (CENELEC EN 61120-1: 1993)

IEC 61120-2 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional UsePart 2: Format A First Edition; (CENELEC EN61120-2: 1993)

IEC 61120-3 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional UsePart 3: Format B First Edition; (CENELEC EN61120-3: 1993)

IEC 61120-4 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional UsePart 4: Magnetic Tape Properties: Definitions andMethods of Measurement First Edition; (CENELEC EN61120-4: 1992)

IEC 61120-5 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional UsePart 5: Reels First Edition; CENELEC EN 61120-5: 1995

IEC 61121 Tumbler Dryers for Household Use - Methods for


Measuring the Performance Second Edition IEC 61122 Still Video Floppy Disk Magnetic Recording System

First Edition; (CENELEC EN 61122:1993) IEC 61123 Reliability Testing Compliance Test Plans for

Success Ratio First Edition IEC 61124 Reliability Testing - Compliance Tests for Constant

Failure Rate and Constant Failure Intensity FirstEdition

IEC 61125 Unused Hydrocarbon-Based Insulating Liquids - TestMethods for Evaluating the Oxidation StabilityFirst Edition; Corrigendum 09/1992

IEC 61126 Procedure for Use in the Preparation of MaximumLamp Outlines First Edition; (Amendment 1-1996)

IEC 61127 High Pressure Xenon Short Arc Lamps - Dimensional, Electrical and Photometric Data and Cap Types FirstEdition

IEC 61128 Alternating Current Disconnectors Bus-TransferCurrent Switching by Disconnectors First Edition; (Amendment 1-1994)

IEC 61129 Alternating Current Earthing Switches InducedCurrent Switching First Edition; (Amendment1-1994) (CENELEC EN 16629:1994) (CENELEC EN 61129: 1995)

IEC 61131-1 Programmable Controllers - Part 1: GeneralInformation First Edition; CENELEC EN 61131-1: 1994

IEC 61131-2 Programmable Controllers - Part 2: EquipmentRequirements and Tests First Edition; CENELEC EN61131-2: 1994

IEC 61131-3 Programmable Controllers - Part 3: ProgrammingLanguages First Edition; (CENELEC EN 61131-3: 1993)

IEC 61131-4 Programmable Controllers - Part 4: User GuidelinesFirst Edition NEMA IA 2.4-1995;

IEC 61133 Electric Traction - Rolling Stock - Test Methodsfor Electric and Thermal/Electric Rolling Stock onCompletion of Construction and Before Entry intoService First Edition

IEC 61134 Airborne Instrumentation for Measurement ofTerrestrial Gamma Radiation First Edition

IEC 61135 Decca Navigator System: Receivers for Ships MinimumPerformance Standards - Methods of Testing andRequired Test Results First Edition

IEC 61136-1 Semiconductor Power Convertors - Adjustable SpeedElectric Drive Systems - General Requirements Part1: Rating Specifications, Particularly for D.C. Motor Drives First Edition

IEC 61137 Radiation Protection Instrumentation - InstalledPersonnel Surface Contamination MonitoringAssemblies - Low Energy X and Gamma Emitters FirstEdition

IEC 61138 Cables for Portable Earthing and Short-CircuitingEquipment Second Edition; Amendment 1-1995

IEC 61140 Protection Against Electric Shock - Common Aspectsfor Installation and Equipment Second Edition

IEC 61141 Upper Frequency Limit of R.F. Coaxial ConnectorsFirst Edition

IEC 61142 Data Exchange for Meter Reading, Tariff and LoadControl - Local Bus Data Exchange First Edition; CENELEC EN 61142: 1993

IEC 61143-1 Electrical Measuring Instruments - X-t RecordersPart 1: Definitions and Requirements FirstEdition; Amendment 1-1997

IEC 61143-2 Electrical Measuring Instruments - X-t RecordersPart 2: Recommended Additional Test Methods FirstEdition; CENELEC EN 61143-2: 1994


IEC 61144 Test Method for the Determination of Oxygen Indexof Insulating Liquids First Edition; (CENELEC EN61144:1993)

IEC 61145 Calibration and Usage of Ionization Chamber Systemsfor Assay of Radionuclides First Edition

IEC 61146-1 Video Cameras (PAL/SECAM/NTSC) - Methods ofMeasurement - Part 1: Non-Broadcast Single-SensorCameras First Edition

IEC 61146-3 Video Cameras (PAL/SECAM/NTSC) - Methods ofMeasurements - Part 3: Non-Broadcast Camera-Recorders First Edition

IEC 61146-4 Video Cameras (PAL/SECAM/NTSC) - Methods ofMeasurements - Part 4: Automatic Functions of VideoCameras and Camera-Recorders First Edition

IEC 61147 Uses of Infra-Red Transmission and the Preventionor Control of Interference Between Systems FirstEdition

IEC 61148 Terminal Markings for Valve Device Stacks andAssemblies and for Power Convertor Equipment FirstEdition; Corrigendum-1995

IEC TR 61149 Guide for Safe Handling and Operation of MobileRadio Equipment First Edition

IEC 61150 Alkaline Secondary Cells and Batteries SealedNickel-Cadmium Rechargeable Monobloc Batteries inButton Cell Design First Edition; Corrigendum03/1992; CENELEC EN 61150: 1993

IEC 61151 Nuclear Instrumentation - Amplifiers andPreamplifiers Used with Detectors of IonizingRadiation - Test Procedures First Edition

IEC 61152 Dimensions of Metal- Sheathed Thermometer ElementsFirst Edition

IEC 61153 Electrical and Pneumatic Analogue Chart Recordersfor Use in Industrial- Process Control Systems - Guidance for Inspection and Routine Testing FirstEdition

IEC 61156-1 Multicore and Symmetrical Pair/Quad Cables forDigital Communications Part 1: GenericSpecification First Edition

IEC 61156-2 Multicore and Symmetrical Pair/Quad Cables forDigital Communications - Part 2: Horizontal FloorWiring - Sectional Specification First Edition

IEC 61156-2-1 Multicore and Symmetrical Pair/Quad Cables forDigital Communications - Part 2: Horizontal FloorWiring - Section 1: Blank Detail SpecificationFirst Edition

IEC 61156-3 Multicore and Symmetrical Pair/Quad Cables forDigital Communications - Part 3: Work Area Wiring - Sectional Specification First Edition

IEC 61156-3-1 Multicore and Symmetrical Pair/Quad Cables forDigital Communications - Part 3: Work Area Wiring - Section 1: Blank Detail Specification FirstEdition

IEC 61156-4 Multicore and Symmetrical Pair/Quad Cables forDigital Communications - Part 4: Riser Cables - Sectional Specification First Edition

IEC 61156-4-1 Multicore and Symmetrical Pair/Quad Cables forDigital Communications - Part 4: Riser Cables - Section 1: Blank Detail Specification FirstEdition

IEC 61157 Requirements for the Declaration of the AcousticOutput of Medical Diagnostic Ultrasonic EquipmentFirst Edition; (CENELEC EN 61157: 1994) (AS/NZS4194: 1994)

IEC 61158-2 Fieldbus Standard for Use in Industrial Control


Systems - Part 2: Physical Layer Specification andService Definition First Edition; (CENELEC EN61158-2: 1994) (NEMA IA 3.2: 1994) (Amendment1-1995) (Amendment 2-1996)

IEC 61160 Formal Design Review First Edition; (Amendment1-1994)

IEC 61161 Ultrasonic Power Measurement in Liquids in theFrequency Range 0,5 MHz to 25 MHz Edition 1.1

IEC 61162-1 Maritime Navigation and RadiocommunicationEquipment and Systems - Digital Interfaces - Part1: Single Talker and Multiple Listeners FirstEdition; CENELEC EN 61 162-1: 1996

IEC 61163-1 Reliability Stress Screening - Part 1: RepairableItems Manufactured in Lots First Edition

IEC 61164 Reliability Growth - Statistical Test andEstimation Methods First Edition

IEC 61165 Application of Markov Techniques First Edition IEC 61166 High-Voltage Alternating Current Circuit-Breakers

- Guide for Seismic Qualification of High-VoltageAlternating Current Circuit-Breakers FirstEdition; (CENELEC EN 61166:1993)

IEC 61167 Metal Halide Lamps First Edition; Amendment 103-1995; Amendment 2 04-1997

IEC 61168 Radiotherapy Simulators - Functional PerformanceCharacteristics First Edition; CENELEC EN 61168: 1994; AS/NZS 4213.1: 1994

IEC 61169-1 Radio-Frequency Connectors Part 1: GenericSpecification - General Requirements and MeasuringMethods First Edition; IECQ QC 220000; Amendment 105-1996; Amendment 2 04-1997

IEC 61169-1-1 Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail SpecificationFirst Edition; (IECQ QC 220001)

IEC 61169-33 Radio-Frequency Connectors Part 33: SectionalSpecification for Series BMA R.F. Connectors FirstEdition; IECQ QC 222800

IEC 61169-36 Radio-Frequency Connectors Part 36: MicrominiatureR.R. Coaxial Connectors with Snap-On Coupling - Characteristic Impedance 50 (Type MCX) FirstEdition; IECQ QC 223600

IEC 61170 Radiotherapy Simulators - Guidelines for FunctionalPerformance Characteristics First Edition; AS/NZS4213.2: 1994

IEC 61171 Radiation Protection Instrumentation - MonitoringEquipment - Atmospheric Radioactive Iodines in theEnvironment First Edition

IEC 61172 Radiation Protection Instrumentation - MonitoringEquipment - Radioactive Aerosols in the EnvironmentFirst Edition

IEC 61173 Overvoltage Protection for Photovoltaic (PV) PowerGenerating Systems - Guide First Edition; CENELECEN 61173: 1994

IEC 61175 Designations for Signals and Connections FirstEdition; (CENELEC EN 61175:1993)

IEC 61176 Hand-Held Electric Mains Voltage Operated CircularSaws - Methods for Measuring the Performance FirstEdition; (CENELEC EN 61176:1993)

IEC 61178-1 Quartz Crystal Units - a Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 1: Generic SpecificationFirst Edition; IECQ QC 680000

IEC 61178-2 Quartz Crystal Units - a Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional Specification


- Capability Approval First Edition; IECQ QC 680100 IEC 61178-2-1 Quartz Crystal Units - a Specification in the IEC

Quality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional Specification - Capability Approval - Section 1: Blank DetailSpecification First Edition; IECQ QC 680101

IEC 61178-3 Quartz Crystal Units - a Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 3: Sectional Specification - Qualification Approval First Edition; IECQ QC680200

IEC 61178-3-1 Quartz Crystal Units - a Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 3: Sectional Specification - Qualification Approval Section 1: Blank DetailSpecification First Edition; IECQ QC 680201

IEC 61179 Helical-Scan Digital Composite Video CassetteRecording System Using 19 mm Magnetic Tape, FormatD2 (NTSC, PAL, PAL-M) First Edition; (CENELEC EN61179:1993)

IEC 61180-1 High-Voltage Test Techniques for Low-VoltageEquipment Part 1: Definitions, Test and ProcedureRequirements First Edition

IEC 61180-2 High-Voltage Test Techniques for Low-VoltageEquipment - Part 2: Test Equipment First Edition; CENELEC EN 61180-2: 1994

IEC 61181 Impregnated Insulating Materials - Application ofDissolved Gas Analysis (DGA) to Factory Tests onElectrical Equipment First Edition; (CENELEC EN61181:1993)

IEC 61182-1 Printed Boards - Electronic Data Description andTransfer - Part 1: Printed Board Description inDigital Form First Edition

IEC 61182-7 Printed Boards - Electronic Data Description andTransfer - Part 7: Bare Board Electric TestInformation in Digital Form First Edition; CENELECEN 61182-7: 1995

IEC 61183 Electroacoustics - Random-Incidence and Diffuse-Field Calibration of Sound Level Meters FirstEdition; CENELEC EN 61183: 1994

IEC 61184 Bayonet Lampholders Second Edition IEC 61185 Magnetic Oxide Cores (ETD-Cores) Intended for Use

in Power Supply Applications - Dimensions FirstEdition; (Amendment 1-1995)

IEC 61186-1 Transformers and Inductors for Use inTelecommunication and Electronic Equipment - Designations for Cores and Assemblies Part 1: Laminated Cores First Edition

IEC 61187 Electrical and Electronic Measuring Equipment - Documentation First Edition; CENELEC EN 61187: 1994; Cancels and Replaces IEC 278: 1968

IEC 61188-1-1 Printed Boards and Printed Board Assemblies - Design and Use - Part 1-1: Generic Requirements - Flatness Considerations for Electronic AssembliesFirst Edition

IEC 61188-1-2 Printed Boards and Printed Board Assemblies - Design and Use - Part 1-2: Generic Requirements - Controlled Impedance First Edition

IEC 61189-1 Test Methods for Electrical Materials, Interconnection Structures and Assemblies - Part1: General Test Methods and Methodology FirstEdition

IEC 61189-2 Test Methods for Electrical Materials, Interconnection Structures and Assemblies - Part


2: Test Methods for Materials for InterconnectionStructures First Edition; Corrigendum-1997

IEC 61189-3 Test Methods for Electrical Materials, Interconnection Structures and Assemblies - Part3: Test Methods for Interconnection Structures (Printed Boards) First Edition

IEC 61194 Characteristic Parameters of Stand-AlonePhotovoltaic (PV) Systems First Edition; CENELEC EN61194: 1995

IEC 61195 Double-Capped Fluorescent Lamps - SafetySpecifications First Edition; Amendment 1-1998

IEC 61196-1 Radio-Frequency Cables - Part 1: GenericSpecification - General, Definitions, Requirementsand Test Methods First Edition

IEC 61196-2 Radio-Frequency Cables - Part 2: SectionalSpecification for Semi-Rigid Radio- Frequency andCoaxial Cables with Polytetrafluoroethylene (PTFE) Insulation Second Edition

IEC 61196-2-1 Detail Specification for Coaxial Cable for DigitalCommunication in Horizontal Floor Wiring for a 500m Reach and up to 10 Mb/s First Edition

IEC 61196-3-1 Radio-Frequency Cables - Part 3: Coaxial Cables forDigital Communication in Horizontal Floor Wiring - Section 1: Detail Specification for Cables of 500m Reach and up to 10 Mb/s First Edition

IEC 61196-3-2 Radio Frequency Cables - Part 3-2: Coaxial Cablesfor Digital Communication in Horizontal FloorWiring - Detail Specification for Coaxial Cableswith Solid Dielectric for Local Area Networks of185 m Reach and Up to 10 Mb/s First Edition

IEC 61196-3-3 Radio Frequency Cables - Part 3-3: Coaxial Cablesfor Digital Communiaction in Horizontal FloorWiring - Detail Specification for Coaxial Cableswith Foamed Dielectric for Local Area Networks of185 m Reach and Up to 10 Mb/s First Edition

IEC 61196-4 Radio-Frequency Cables - Part 4: SectionalSpecification for Radiating Cables First Edition

IEC 61197 Insulating Liquids - Linear Flame Propagation - Test Method Using a Glass-Fibre Tape FirstEdition; CENELEC EN 61197: 1994

IEC 61198 Mineral Insulating Oils - Methods for theDetermination of 2-Furfural and Related CompoundsFirst Edition; CENELEC EN 61198: 1994

IEC 61199 Single-Capped Fluorescent Lamps - SafetySpecifications First Edition; Amendment 1-1997; Amendment 2-1998

IEC 61200-52 Electrical Installation Guide - Part 52: Selectionand Erection of Electrical Equipment - WiringSystems First Edition

IEC TR 61200-53 Electrical Installation Guide - Part 53: Selectionand Erection of Electrical Equipment - Switchgearand Controlgear First Edition; Corrigendum 10/1995

IEC TR 61200-413 Electrical Installation Guide - Part 413: Protection Against Indirect Contact - AutomaticDisconnection of Supply First Edition

IEC TR 61200-704 Electrical Installation Guide - Part 704: Construction and Demolition Site InstallationsFirst Edition

IEC 61201 Extra-Low Voltage (ELV) - Limit Values FirstEdition

IEC 61202-1 Fibre Optic Isolators - Part 1: GenericSpecification First Edition; (IECQ QC 830000)

IEC 61202-1-1 Fibre Optic Isolators - Part 1-1: Blank DetailSpecification First Edition; (IECQ QC 830001)


IEC 61203 Synthetic Organic Esters for Electrical Purposes - Guide for Maintenance of Transformer Esters inEquipment First Edition; CENELEC EN 61203: 1994

IEC 61204 Low-Voltage Power Supply Devices, D.C. Output - Performance Characteristics and SafetyRequirements First Edition

IEC 61205 Ultrasonics - Dental Descaler Systems - Measurementand Declaration of the Output Characteristics FirstEdition; (CENELEC EN 61205: 1994)

IEC 61206 Ultrasonics - Continuous-Wave Doppler Systems - Test Procedures First Edition; (AS/NZS 4188: 1994) (CENELEC EN 61206: 1995)

IEC 61207-1 Expression of Performance of Gas Analyzers - Part1: General First Edition; CEN EN 61207-1: 1994

IEC 61207-2 Expression of Performance of Gas Analyzers - Part2: Oxygen in Gas (Utilizing High-TemperatureElectrochemical Sensors) First Edition; Corrigendum05/1994

IEC 61207-6 Expression of Performance of Gas Analyzers - Part6: Photometric Analyzers First Edition; CENELEC EN61207-6: 1994

IEC 61208 High-Voltage Alternating Current Circuit-Breakers - Guide for Maintenance First Edition; Replaced byIEC 694: 1996

IEC 61210 Connecting Devices - Flat Quick-ConnectTerminations for Electrical Copper Conductors - Safety Requirements First Edition

IEC 61211 Insulators of Ceramic Material or Glass forOverhead Lines with a Nominal Voltage Greater Than1 000 V - Puncture Testing First Edition

IEC 61212-1 Industrial Rigid Round Laminated Tubes and RodsBased on Thermosetting Resins for ElectricalPurposes - Part 1: General Requirements FirstEdition; CENELEC EN 61212-1: 1995

IEC 61212-2 Industrial Rigid Round Laminated Tubes and RodsBased on Thermosetting Resins for ElectricalPurposes - Part 2: Methods of Test First Edition; CENELEC EN 61212-2: 1996

IEC 61212-3-1 Industrial Rigid Round Laminated Tubes and RodsBased on Thermosetting Resins for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 1: Round Laminated Rolled TubesFirst Edition; CENELEC EN 61212-3-1: 1995

IEC 61212-3-2 Industrial Rigid Round Laminated Tubes and RodsBased on Thermosetting Resins for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 2: Round Laminated Moulded TubesFirst Edition; BS EN 61212-3- 2: 1995; CENELEC EN61212-3-2: 1995

IEC 61212-3-3 Industrial Rigid Round Laminated Tubes and RodsBased on Thermosetting Resins for ElectricalPurposes - Part 3: Specifications for IndividualMaterials - Sheet 3: Round Laminated Moulded RodsFirst Edition; CENELEC EN 61212-3-3: 1995

IEC 61213 Analogue Audio Recording on Video Tape - Polarityof Magnetization First Edition; CENELEC EN 61213: 1994

IEC 61214 Hand-Held Mains Voltage Operated Spray Guns - Performance Requirements First Edition

IEC 61215 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type ApprovalFirst Edition; CENELEC EN 61215: 1995

IEC 61217 Radiotherapy Equipment - Coordinates, Movements andScales First Edition


IEC 61219 Live Working - Earthing or Earthing and Short-Circuiting Equipment Using Lances as a Short-Circuiting Device - Lance Earthing First Edition; CENELEC EN 61219: 1993

IEC 61220 Ultrasonics - Fields - Guidance for the Measurementand Characterization of Ultrasonic Fields Generatedby Medical Ultrasonic Equipment Using Hydrophonesin the Frequency Range 0,5 MHz to 15 MHz FirstEdition; (AS/NZS 4190: 1994)

IEC 61221 Petroleum Products and Lubricants - TriarylPhosphate Ester Turbine Control Fluids (CategoryISO-L-TCD) - Specifications First Edition; CENELECEN 61221: 1995

IEC 61223-1 Evaluation and Routine Testing in Medical ImagingDepartments - Part 1: General Aspects FirstEdition; (AS/NZS 4184.1: 1994)

IEC 61223-2-1 Evaluation and Routine Testing in Medical ImagingDepartments - Part 2-1: Constancy Tests - FilmProcessors First Edition; (AS/NZS 4184.2.1: 1994)

IEC 61223-2-2 Evaluation and Routine Testing in Medical ImagingDepartments - Part 2-2: Constancy Tests - Radiographic Cassettes and Film Changers - Film-Screen Contact and Relative Sensitivity of theScreen-Cassette Assembly First Edition; AS/NZS4184.2.2: 1994

IEC 61223-2-3 Evaluation and Routine Testing in Medical ImagingDepartments - Part 2-3: Constancy Tests - DarkroomSafelight Conditions First Edition; (AS/NZS4184.2.3: 1994)

IEC 61223-2-4 Evaluation and Routine Testing in Medical ImagingDepartments - Part 2-4: Constancy Tests - Hard CopyCameras First Edition; (CENELEC EN 61223-2-4: 1994) (AS/NZS 4184.2.4: 1995)

IEC 61223-2-5 Evaluation and Routine Testing in Medical ImagingDepartments - Part 2-5: Constancy Tests - ImageDisplay Devices First Edition; (CENELEC EN61223-2-5: 1994) (AS/NZS 4184.2.5: 1995)

IEC 61223-2-6 Evaluation and Routine Testing in Medical ImagingDepartments - Part 2-6: Constancy Tests - X-RayEquipment for Computed Tomography First Edition; (CENELEC EN 61223-2-6: 1994) (AS/NZS 4184.2.6: 1995)

IEC 61223-3-2 Evaluation and Routine Testing in Medical ImagingDepartments - Part 3-2: Acceptance Tests - ImagingPerformance of Mammographic X-Ray Equipment FirstEdition

IEC 61223-3-3 Evaluation and Routine Testing in Medical ImagingDepartments - Part 3-3: Acceptance Tests - ImagingPerformance of X-Ray Equipment for DigitalSubtraction Angiography (DSA) First Edition

IEC 61224 Nuclear Reactors - Response Time in ResistanceTemperature Detectors (RTD) - In Situ MeasurementsFirst Edition

IEC 61225 Nuclear Power Plants - Instrumentation and ControlSystems Important for Safety - Requirements forElectrical Supplies First Edition

IEC 61226 Nuclear Power Plants - Instrumentation and ControlSystems Important for Safety - Classification FirstEdition

IEC 61227 Nuclear Power Plants - Control Rooms - OperatorControls First Edition

IEC 61228 Method of Measuring and Specifying the UV-Radiationof Ultraviolet Lamps Used for Sun-Tanning FirstEdition; (CENELEC EN 61228: 1994) (Amendment


1-1996) IEC 61229 Rigid Protective Covers for Live Working on a.c.

Installations First Edition; Amendment 1-1998 IEC 61230 Live Working - Portable Equipment for Earthing or

Earthing and Short-Circuiting First Edition; CENELEC EN 61230: 1995; Corrigendum-March 1997

IEC 61231 International Lamp Coding System (ILCOS) FirstEdition

IEC 61232 Aluminium-Clad Steel Wires for Electrical PurposesFirst Edition

IEC 61233 High-Voltage Alternating Current Circuit-Breakers - Inductive Load Switching First Edition

IEC 61234-1 Method of Test for the Hydrolytic Stability ofElectrical Insulating Materials Part 1: PlasticFilms First Edition; (CENELEC EN 61234-1: 1994)

IEC 61234-2 Electrical Insulating Materials - Methods of Testfor the Hydrolytic Stability - Part 2: MouldedThermosets First Edition

IEC 61235 Live Working - Insulating Hollow Tubes forElectrical Purposes First Edition; CENELEC EN61235: 1995; Corrigendum-March 1997

IEC 61236 Saddles, Pole Clamps (Stick Clamps) and Accessoriesfor Live Working First Edition; CENELEC EN 61236: 1995

IEC 61237-1 Broadcast Video Tape Recorders - Methods ofMeasurement - Part 1: Mechanical Measurements FirstEdition

IEC 61237-2 Broadcast Video Tape Recorders - Methods ofMeasurement - Part 2: Electrical Measurements ofAnalogue Composite Video Signals First Edition; CENELEC EN 61237-2: 1995

IEC 61237-3 Methods of Measurement for Broadcast Video TapeRecorders Part 3: Electrical Measurements forAnalogue Component Video Signals First Edition; Corrigendum-1995; CENELEC EN 61237-3: 1995

IEC 61237-4 Broadcast Video Tape Recorders - Methods ofMeasurement - Part 4: Analogue Audio PerformanceMeasurements First Edition

IEC 61238-1 Compression and Mechanical Connectors for PowerCables with Copper or Aluminium Conductors Part 1: Test Methods and Requirements First Edition; AS/NZS4325.1: 1995

IEC TR 61238-2 Compression and Mechanical Connectors for PowerCables with Copper or Aluminium Conductors - Part2: Terminal Lugs for Power Cables to Fit Equipmentup to and Including 1kV - Overall Dimensions FirstEdition

IEC 61239 Nuclear Instrumentation - Portable Gamma RadiationMeters and Spectrometers Used for Prospecting - Definitions, Requirements and Calibration FirstEdition

IEC 61240 Preparation of Outline Drawings of Surface-MountedDevices (SMD) for Frequency Control and Selection - General Rules First Edition

IEC 61241-1-1 Electrical Apparatus for Use in the Presence ofCombustible Dust - Part 1: Electrical ApparatusProtected by Enclosures - Section 1: Specificationfor Apparatus First Edition; Corrigendum 10/1993; Corrigendum 03/1994; CAN/CSA-IEC E1241-1-1-95

IEC 61241-1-2 Electrical Apparatus for Use in the Presence ofCombustible Dust - Part 1: Electrical ApparatusProtected by Enclosures - Section 2: Selection, Installation, and Maintenance First Edition

IEC 61241-2-1 Electrical Apparatus for Use in the Presence of


Combustible Dust - Part 2: Test Methods - Section1: Methods for Determining the Minimum IgnitionTemperatures of Dust First Edition

IEC 61241-2-2 Electrical Apparatus for Use in the Presence ofCombustible Dust - Part 2: Test Methods - Section2: Method for Determining the ElectricalResistivity of Dust in Layers First Edition; (Corrigendum-1994) (CENELEC EN 61241-2-2: 1995)

IEC 61241-2-3 Electrical Apparatus for Use in the Presence ofCombustible Dust - Part 2: Test Methods - Section3: Method for Determining Minimum Ignition Energyof Dust/Air Mixtures First Edition

IEC 61241-3 Electrical Apparatus for Use in the Presence ofCombustible Dust - Part 3: Classification of AreasWhere Combustible Dusts Are or May Be Present FirstEdition

IEC 61242 Electrical Accessories - Cable Reels for Householdand Similar Purposes First Edition

IEC 61243-1 Live Working - Voltage Detectors - Part 1: Capacitive Type to Be Used for Voltages Exceeding 1kV A.C. First Edition; Amendment 1-1997

IEC 61243-2 Live Working - Voltage Detectors - Part 2: Resistive Type to Be Used for Voltages of 1 kV to36 kV A.C. First Edition; Corrigendum-1996

IEC 61243-5 Live Working - Voltage Detectors - Part 5: VoltageDetecting Systems (VDS) First Edition

IEC 61244-1 Determination of Long-Term Radiation Ageing inPolymers Part 1: Techniques for MonitoringDiffusion-Limited Oxidation First Edition

IEC TR 61244-2 Determination of Long-Term Radiation Ageing inPolymers - Part 2: Procedures for Predicting Ageingat Low Dose Rates First Edition

IEC TR 61244-3 Long-Term Radiation Ageing in Polymers - Part 3: Procedures for In-Service Monitoring of Low-VoltageCable Materials First Edition

IEC 61245 Artificial Pollution Tests on High-VoltageInsulators to Be Used on D.C. Systems First Edition

IEC 61246 Magnetic Oxide Cores (E-Cores) of RectangularCross-Section and Associated Parts - DimensionsFirst Edition

IEC 61247 PM-Cores Made of Magnetic Oxides and AssociatedParts - Dimensions First Edition

IEC 61248-1 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 1: GenericSpecification First Edition; (IECQ QC 260000)

IEC 61248-2 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 2: SectionalSpecification for Signal Transformers on the Basisof the Capability Approval Procedure FirstEdition; (IECQ QC 260100)

IEC 61248-3 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 3: SectionalSpecification for Power Transformers on the Basisof the Capability Approval Procedure FirstEdition; (IECQ QC 260200)

IEC 61248-4 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 4: SectionalSpecification for Power Transformers for SwitchedMode Power Supplies (SMPS) on the Basis of theCapability Approval Procedure First Edition; IECQQC 260300

IEC 61248-5 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 5: SectionalSpecification for Pulse Transformers on the Basis


of the Capability Approval Procedure FirstEdition; IECQ QC 260400

IEC 61248-6 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 6: SectionalSpecification for Inductors on the Basis of theCapability Approval Procedure First Edition; IECQQC 260500

IEC 61248-7 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 7: SectionalSpecification for High-Frequency Inductors andIntermediate Frequency Transformers on the Basis ofthe Capability Approval Procedure First Edition; QC260600

IEC 61249-5-1 Materials for Interconnection Structures - Part 5: Sectional Specification Set for Conductive Foilsand Films with and without Coatings - Section 1: Copper Foils (for the Manufacture of Copper-CladBase Materials) First Edition; CENELEC EN61249-5-1: 1996; Cancels and Replaces IEC 249-3A: 1976

IEC 61249-5-4 Materials for Interconnection Structures - Part 5: Sectional Specification Set for Conductive Foilsand Films with and without Coatings - Section 4: Conductive Inks First Edition

IEC 61249-7-1 Materials for Interconnection Structures - Part 7: Sectional Specification Set for Restraining CoreMaterials - Section 1: Copper/Invar/Copper FirstEdition; CENELEC EN 61249-7-1: 1995

IEC 61249-8-7 Materials for Interconnection Structures - Part 8: Sectional Specification Set for Non-ConductiveFilms and Coatings - Section 7: Marking Legend InksFirst Edition

IEC 61249-8-8 Materials for Interconnection Structures - Part 8: Sectional Specification Set for Non-ConductiveFilms and Coatings - Section 8: Temporary PolymerCoatings First Edition

IEC 61250 Nuclear Reactors - Instrumentation and ControlSystems Important for Safety - Detection of Leakagein Coolant Systems First Edition

IEC 61251 Electrical Insulating Materials - A.C. VoltageEndurance Evaluation - Introduction First Edition

IEC 61252 Electroacoustics - Specifications for PersonalSound Exposure Meters First Edition CENELEC EN 61252: 1995

IEC 61253-1 Piezoelectric Ceramic Resonators - A Specificationin the IEC Quality Assessment System for ElectronicComponents (IECQ) Part 1: Generic Specification - Qualification Approval First Edition; (IECQ QC670000)

IEC 61253-2 Piezoelectric Ceramic Resonators - A Specificationin the IEC Quality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional Specification - Qualification Approval First Edition; (IECQ QC670100)

IEC 61253-2-1 Piezoelectric Ceramic Resonators - A Specificationin the IEC Quality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional Specification - Qualification Approval Section 1: Blank DetailSpecification - Assessment Level E; First Edition

IEC 61254 Electric Shavers for Household Use - Methods forMeasuring the Performance First Edition; CENELEC EN61254: 1994

IEC 61255 Household Electric Heating Pads - Methods forMeasuring Performance First Edition; (EN61255:1994)


IEC 61256 Radiation Protection Instrumentation - InstalledMonitors for the Detection of RadioactiveContamination of Laundry First Edition

IEC 61258 Guidelines for the Development and Use of MedicalElectrical Equipment Educational Materials FirstEdition

IEC 61259 Gas-Insulated Metal-Enclosed Switchgear for RatedVoltages 72,5 kV and Above - Requirements forSwitching of Bus-Charging Currents by DisconnectorsFirst Edition; CENELEC EN 61259: 1994

IEC 61260 Electroacoustics - Octave-Band and Fractional-Octave-Band Filters First Edition; CENELEC EN 61260: 1995; Supersedes IEC 225: 1966

IEC 61261-1 Piezoelectric Ceramic Filters for Use in ElectronicEquipment - A Specification in the IEC QualityAssessment System for Electronic Components (IECQ) Part 1: Generic Specification - QualificationApproval First Edition; (IECQ QC 660000)

IEC 61261-2 Piezoelectric Ceramic Filters for Use in ElectronicEquipment - A Specification in the IEC QualityAssessment System for Electronic Components (IECQ) Part 2: Sectional Specification - QualificationApproval First Edition; (IECQ QC 660100)

IEC 61261-2-1 Piezoelectric Ceramic Filters for Use in ElectronicEquipment - A Specification in the IEC QualityAssessment System for Electronic Components (IECQ) Part 2: Sectional Specification - QualificationApproval Section 1: Blank Detail Specification - Assessment Level E First Edition; (IECQ QC660101)

IEC 61262-1 Medical Electrical Equipment - Characteristics ofElectro-Optical X-Ray Image Intensifiers - Part 1: Determination of the Entrance Field Size FirstEdition; (CEN EN 61262-1: 1994) (AS/NZS 4356.1: 1996)

IEC 61262-2 Medical Electrical Equipment - Characteristics ofElectro-Optical X-Ray Image Intensifiers - Part 2: Determination of the Conversion Factor FirstEdition; CENELEC EN 61262-2: 1994; AS/NZS 4356.2: 1996

IEC 61262-3 Medical Electrical Equipment - Characteristics ofElectro-Optical X-Ray Image Intensifiers - Part 3: Determination of Luminance Distribution andLuminance Non-Uniformity First Edition; (CENELEC EN61262-3: 1994) (AS/NZS 4356.3: 1996)

IEC 61262-4 Medical Electrical Equipment - Characteristics ofElectro-Optical X-Ray Image Intensifiers - Part 4: Determination of the Image Distortion FirstEdition; (CENELEC EN 61262-4: 1994) (AS/NZS4356.4: 1996)

IEC 61262-5 Medical Electrical Equipment - Characteristics ofElectro-Optical X-Ray Image Intensifiers - Part 5: Determination of the Detective Quantum EfficiencyFirst Edition; (CENELEC EN 61262-5: 1994) (AS/NZS4356.5: 1996)

IEC 61262-6 Medical Electrical Equipment - Characteristics ofElectro-Optical X-Ray Image Intensifiers - Part 6: Determination of the Contrast Ratio and VeilingGlare Index First Edition; (CENELEC EN 61262-6: 1994) (AS/NZS 4356.3: 1996)

IEC 61262-7 Medical Electrical Equipment - Characteristics ofElectro-Optical X-Ray Image Intensifiers - Part 7: Determination of the Modulation Transfer FunctionFirst Edition; (CENELEC EN 61 262-7: 1995)

IEC 61263 Radiation Protection Instrumentation - Portable


Potential Alpha Energy Meter for Rapid Measurementsin Mines First Edition

IEC 61264 Ceramic Pressurized Hollow Insulators for High-Voltage Switchgear and Controlgear First Edition

IEC 61265 Electroacoustics - Instruments for Measurement ofAircraft Noise - Performance Requirements forSystems to Measure One-Third-Octave Band SoundPressure Levels in Noise Certification ofTransport-Category Aeroplanes First Edition; Supersedes IEC 561: 1976; Corrigendum-06/1995

IEC 61266 Ultrasonics - Hand-Held Probe Doppler FoetalHeartbeat Detectors - Performance Requirements andMethods of Measurement and Reporting First Edition (CENELEC EN 61266: 1995) (AS/NZS 4374:1996)

IEC 61267 Medical Diagnostic X-Ray Equipment - RadiationConditions for Use in the Determination ofCharacteristics First Edition; (CENELEC EN 61267: 1996) (SNZ AS/NZS 4358: 1996)

IEC 61268 Alternating Current Static Var-Hour Meters forReactive Energy (Classes 2 and 3) First EditionCENELEC EN 61 268: 1996

IEC 61269-1 Fibre Optic Terminus Sets - Part 1: GenericSpecification First Edition; (IECQ QC 780000)

IEC 61269-1-1 Fibre Optic Terminus Sets - Part 1-1: Blank DetailSpecification First Edition; (IECQ QC 780001)

IEC 61270-1 Capacitors for Microwave Ovens - Part 1: GeneralFirst Edition

IEC 61274-1 Fibre Optic Adaptors Part 1: Generic SpecificationFirst Edition; (IECQ QC 860000)

IEC 61274-1-1 Fibre Optic Adaptors Part 1-1: Blank DetailSpecification First Edition; (IECQ QC 860001)

IEC 61275 Radiation Protection Instrumentation - Measurementof Discrete Radionuclides in the Environment - InSitu Photon Spectrometry System Using a GermaniumDetector First Edition

IEC 61276 Nuclear Instrumentation - Guidelines for Selectionof Metrologically Supported Nuclear RadiationSpectrometry Systems First Edition

IEC 61277 Terrestrial Photovoltaic (PV) Power GeneratingSystems - General and Guide First Edition

IEC TR 61278 Live Working - Guidelines for Dielectric Testing ofTools and Equipment First Edition

IEC 61280-1-1 Fibre Optic Communication Subsystem Basic TestProcedures - Part 1-1: Test Procedures for GeneralCommunication Subsystems - Transmitter OutputOptical Power Measurement for Single-Mode OpticalFibre Cable First Edition

IEC 61280-2-4 Fibre Optic Communication Subsystem Basic TestProcedures - Part 2-4: Test Procedures for DigitalSystems - Bit-Rate Tolerance Measurement FirstEdition

IEC 61280-2-5 Fibre Optic Communication Subsystem Basic TestProcedures - Part 2-5: Test Procedures for DigitalSystems - Jitter Transfer Function MeasurementFirst Edition

IEC 61283 Radiation Protection Instrumentation - DirectReading Personal Dose Equivalent (Rate) Monitors - X, Gamma and High Energy Beta Radiation FirstEdition

IEC 61284 Overhead Lines - Requirements and Tests forFittings Second Edition

IEC 61285 Industrial-Process Control - Safety of AnalyserHouses First Edition; Corrigendum-1994; CENELEC EN61285: 1994


IEC 61286 Information Technology - Coded Graphic CharacterSet for Use in the Preparation of Documents Used inElectrotechnology and for Information InterchangeFirst Edition; (CENELEC EN 61286: 1995)

IEC 61287-1 Power Converters Installed on Board Rolling StockPart 1: Characteristics and Test Methods FirstEdition; Supersedes IEC 411, 411-1, 411-3, 411-4and 411-5

IEC 61288-1 Cardiac Defibrillators - Cardiac Defibrillators-Monitors - Part 1: Operation First Edition

IEC 61288-2 Cardiac Defibrillators - Cardiac Defibrillators-Monitors - Part 2: Maintenance First Edition

IEC 61289-1 High Frequency Surgical Equipment - Part 1: Operation First Edition

IEC 61289-2 High Frequency Surgical Equipment - Part 2: Maintenance First Edition

IEC 61290-1-1 Optical Fibre Amplifiers - Basic Specification - Part 1-1: Test Methods for Gain Parameters - Optical Spectrum Analyzer First Edition

IEC 61290-1-3 Optical Fibre Amplifiers - Basic Specification - Part 1-3: Test Methods for Gain Parameters - Optical Power Meter First Edition

IEC 61290-2-1 Optical Fibre Amplifiers - Basic Specification - Part 2-1: Test Methods for Optical PowerParameters - Optical Spectrum Analyzer FirstEdition

IEC 61290-2-2 Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test Methods for Optical PowerParameters - Electrical Spectrum Analyzer FirstEdition; It Shall be Read in Conjunction with IEC61291-1

IEC 61290-2-3 Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical PowerParameters - Optical Power Meter First Edition; ItShall be Read in Conjunction with IEC 61291-1

IEC 61290-6-1 Optical Fibre Amplifiers - Basic Specification - Part 6-1: Test Methods for Pump LeakageParameters - Optical Demultiplexer First Edition; It Shall be Read in Conjunction with IEC 61291-1

IEC 61290-7-1 Optical Fibre Amplifiers - Basic Specification - Part 7-1: Test Methods for Out-of-Band InsertionLosses - Filtered Optical Power Meter First Edition

IEC TR 61292-1 Fibre Optics - Parameters of Amplifier ComponentsFirst Edition

IEC 61293 Marking of Electrical Equipment with RatingsRelated to Electrical Supply - Safety RequirementsFirst Edition; CENELEC EN 61293: 1994

IEC 61294 Insulating Liquids - Determination of the PartialDischarge Inception Voltage (PDIV) - Test ProcedureFirst Edition

IEC 61295 Calibration Tapes for Broadcast VTRs First Edition IEC 61297 Industrial-Process Control Systems - Classification

of Adaptive Controllers for the Purpose ofEvaluation First Edition; CENELEC EN 61 297: 1995

IEC 61298-1 Process Measurement and Control Devices - GeneralMethods and Procedures for Evaluating Performance - Part 1: General Considerations First Edition; CENELEC EN 61 298-1: 1995

IEC 61298-2 Process Measurement and Control Devices - GeneralMethods and Procedures for Evaluating Performance - Part 2: Tests under Reference Conditions FirstEdition; CENELEC EN 61298-2: 1995

IEC 61298-3 Process Measurement and Control Devices - GeneralMethods and Procedures for Evaluating Performance


- Part 3: Tests for the Effects of InfluenceQuantities First Edition

IEC 61298-4 Process Measurement and Control Devices - GeneralMethods and Procedures for Evaluating Performance - Part 4: Evaluation Report Content First Edition

IEC 61300-1 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 1: General and Guidance First Edition; (Corrigendum-1995)

IEC 61300-2-1 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-1: Tests - Vibration (Sinusoidal) FirstEdition

IEC 61300-2-2 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-2: Tests - Mating Durability First Edition

IEC 61300-2-3 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-3: Tests - Static Shear Load First Edition

IEC 61300-2-4 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-4: Tests - Fibre/Cable Retention FirstEdition

IEC 61300-2-5 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-5: Tests - Torsion/Twist First Edition

IEC 61300-2-6 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-6: Tests - Tensile Strength of CouplingMechanism First Edition

IEC 61300-2-7 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-7: Tests - Bending Moment First Edition

IEC 61300-2-8 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-8: Tests - Bump First Edition

IEC 61300-2-9 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-9: Tests - Shock First Edition

IEC 61300-2-10 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-10: Tests - Crush Resistance First Edition

IEC 61300-2-11 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-11: Tests - Axial Compression FirstEdition

IEC 61300-2-12 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-12: Tests - Impact First Edition

IEC 61300-2-13 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-13: Tests - Acceleration First Edition

IEC 61300-2-14 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Mesurement Procedures - Part 2-14: Tests - Maximum Input Power FirstEdition

IEC 61300-2-15 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-15: Tests - Torque Strength of CouplingMechanism First Edition

IEC 61300-2-16 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-16: Tests - Mould Growth First Edition

IEC 61300-2-17 Fibre Optic Interconnecting Devices and Passive


Components - Basic Test and Measurement Procedures - Part 2-17: Tests - Cold First Edition

IEC 61300-2-18 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-18: Tests - Dry Heat - High TemperatureEndurance First Edition

IEC 61300-2-19 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-19: Tests - Damp Heat (Steady State) FirstEdition

IEC 61300-2-20 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-20: Tests - Climatic Sequence FirstEdition

IEC 61300-2-21 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-21: Tests - Composite Temperature-HumidityCyclic Test First Edition

IEC 61300-2-22 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-22: Tests - Change of Temperature FirstEdition

IEC 61300-2-23 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-23: Tests - Sealing for Non-PressurizedClosures of Fibre Optic Devices First Edition

IEC 61300-2-25 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-25: Tests - Sealing Endurance for ClosuresFirst Edition

IEC 61300-2-26 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-26: Tests - Salt Mist First Edition

IEC 61300-2-27 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-27: Tests - Dust - Laminar Flow FirstEdition

IEC 61300-2-28 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-28: Tests - Industrial Atmosphere (SulphurDioxide) First Edition

IEC 61300-2-29 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-29: Tests - Low Air Pressure First Edition

IEC 61300-2-30 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-30: Tests - Solar Radiation First Edition

IEC 61300-2-31 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-31: Tests - Nuclear Radiation FirstEdition

IEC 61300-2-32 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-32: Tests - Water Vapour Permeation FirstEdition

IEC 61300-2-33 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-33: Tests - Assembly and Disassembly ofClosures First Edition

IEC 61300-2-34 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-34: Tests - Resistance to Solvents andContaminating Fluids First Edition



Components - Basic Test and Measurement Procedures - Part 2-35: Tests - Cable Notation First Edition

IEC 61300-2-36 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-36: Tests - Flammability (Fire Hazard) First Edition

IEC 61300-2-37 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-37: Tests - Cable Bending for ClosuresFirst Edition

IEC 61300-2-38 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 2-38: Tests - Sealing for PressurizedClosures of Fibre Optic Devices First Edition

IEC 61300-2-39 Fiber Optic Interconnecting Devices and PassiveComponents - Basic Test Measurement Procedures - Part 2-39: Tests - Susceptibility to ExternalMagnetic Fields First Edition

IEC 61300-2-41 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Mesurement Procedures - Part 2-41: Tests - Screen Testing of Attenuationof Single-Mode Tuned Non-Angled Optical FibreConnectors First Edition

IEC 61300-3-1 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-1: Examinations and Measurements - VisualExamination First Edition

IEC 61300-3-2 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-2: Examinations and Measurements - Polarization Dependence of a Single-Mode FibreOptic Device First Edition

IEC 61300-3-3 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-3: Examinations and Measurements - Monitoring Change in Attenuation and in ReturnLoss (Multiple Paths) First Edition

IEC 61300-3-6 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-6: Examinations and Measurements - ReturnLoss First Edition; Amendment 1-1998

IEC 61300-3-8 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-8: Examinations and Measurements - AmbientLight Susceptibility First Edition

IEC 61300-3-9 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-9: Examinations and Measurements - Far-EndCrosstalk First Edition

IEC 61300-3-10 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-10: Examinations and Measurements - GaugeRetention Force First Edition

IEC 61300-3-11 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-11: Examinations and Measurements - Engagement and Separation Forces First Edition

IEC 61300-3-12 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-12: Examinations and Measurements - Polarization Dependence of Attenuation of aSingle-Mode Fibre Optic Component: MatrixCalculation Method First Edition

IEC 61300-3-13 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures


- Part 3-13: Examinations and Measurements - Control Stability of a Fibre Optic Switch FirstEdition

IEC 61300-3-14 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-14: Examinations and Measurements - Accuracy and Repeatability of the AttenuationSettings of a Variable Attenuator First Edition

IEC 61300-3-15 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-15: Measurements - Eccentricity of aConvex Polished Ferrule Endface First Edition

IEC 61300-3-16 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-16: Examinations and Measurements - Endface Radius of Spherically Polished FerrulesFirst Edition

IEC 61300-3-17 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-17: Examinations and Measurements - Endface Angle of Angle-Polished Ferrules FirstEdition

IEC 61300-3-18 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-18: Examinations and Measurements - KeyingAccuracy of an Angled Endface Connector FirstEdition

IEC 61300-3-19 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-19: Examinations and Measurements - Polarization Dependence of Return Loss of aSingle-Mode Fibre Optic Component First Edition

IEC 61300-3-21 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-21: Examinations and Measurements - Switching Time and Bounce Time First Edition

IEC 61300-3-22 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-22: Examinations and Measurements - Ferrule Compression Force First Edition

IEC 61300-3-23 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-23: Examination and Measurements - FibrePosition Relative to Ferrule Endface First Edition

IEC 61300-3-25 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-25: Examinations and Measurements - Concentricity of the Ferrules and Ferrules withFibre Installed First Edition

IEC 61300-3-26 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-26: Examination and Measurements - Measurement of the Angular Misalignment betweenFibre and Ferrules Axes First Edition

IEC 61300-3-27 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-27: Examinations and Measurements - Measurement Method for the Hole Location of aMultiway Connector Plug First Edition

IEC 61300-3-34 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-34: Examinations and Measurements - Attenuation of Random Mated Connectors FirstEdition



Components - Basic Test and Measurement Procedures - Part 3-39: Examinations and Measurements - P COptical Connector Reference Plug Selection FirstEdition

IEC 61300-3-40 Fibre Optic Interconnecting Devices and PassiveComponents - Basic Test and Measurement Procedures - Part 3-40: Examinations and Measurements - Extinction Ratio of a Polarization Maintaining (pm) Fibre Pigtailed Connector First Edition

IEC 61301 Nuclear Instrumentation - Digital Bus for NIMInstruments First Edition

IEC 61302 Electrical Insulating Materials - Method toEvaluate the Resistance to Tracking and Erosion - Rotating Wheel Dip Test First Edition; Corrigendum-1995; CENELEC EN 1302: 1995

IEC 61303 Medical Electrical Equipment - RadionuclideCalibrators - Particular Methods for DescribingPerformance First Edition; (AS/NZS 4354: 1995)

IEC 61304 Nuclear Instrumentation - Liquid-ScintillationCounting Systems - Performance Verification FirstEdition

IEC 61305-1 Household High-Fidelity Audio Equipment andSystems - Methods of Measuring and Specifying thePerformance - Part 1: General First Edition; CENELEC EN 61305-1: 1995

IEC 61305-2 Household High-Fidelity Audio Equipment andSystems - Methods of Measuring and Specifying thePerformance - Part 2: FM Radio Tuners First Edition

IEC 61305-3 Household High-Fidelity Audio Equipment andSystems - Methods of Measuring and Specifying thePerformance - Part 3: Amplifiers First Edition; CENELEC EN 61305-3: 1995

IEC 61306 Nuclear Instrumentation - Microprocessor BasedNuclear Radiation Measuring Devices First Edition

IEC 61307 Industrial Microwave Heating Installations - TestMethods for the Determination of Power Output FirstEdition

IEC 61308 High-Frequency Dielectric Heating Installations - Test Methods for the Determination of PowerOutput First Edition

IEC 61309 Deep-Fat Fryers for Household Use - Methods forMeasuring the Performance First Edition

IEC 61310-1 Safety of Machinery - Indication, Marking andActuation - Part 1: Requirements for Visual, Auditory and Tactile Signals First Edition; Corrigendum 07/1995

IEC 61310-2 Safety of Machinery - Indication, Marking andActuation - Part 2: Requirements for Marking FirstEdition

IEC 61311 Radiation Protection Instrumentation - Equipmentfor Continuously Monitoring Beta and Gamma EmittingRadionuclides in Liquid Effluents or in SurfaceWaters First Edition

IEC 61312-1 Protection Against Lightning ElectromagneticImpulse - Part 1: General Principles First Edition

IEC 61313-1 Fibre Optic Passive Components and CableAssemblies - Part 1: Capability Approval - GenericSpecification First Edition; (IECQ QC 870000)

IEC 61314-1 Fibre Optic Fan-Outs - Part 1: GenericSpecification First Edition; (IECQ QC 880000)

IEC 61314-1-1 Fibre Optic Fan-Outs - Part 1-1: Blank DetailSpecification - Environmental Categories 1, 2, 3, 5and 99 First Edition

IEC 61315 Calibration of Fibre Optic Power Meters - First


Edition IEC 61316 Industrial Cable Reels First Edition IEC 61318 Live Working - Guidelines for Quality Assurance

Plans First Edition IEC 61319-1 Interconnections of Satellite Receiving Equipment

- Part 1: Europe First Edition; CENELEC EN61319-1: 1996

IEC 61319-2 Interconnections of Satellite Receiving Equipment - Part 2: Japan First Edition

IEC TR 61320 Handbook of Audio and Video Symbols First Edition IEC 61321-1 High-Voltage Testing Techniques with Very Fast

Impulses - Part 1: Measuring Systems for Very FastFront Overvoltages Generated in Gas-InsulatedSubstations First Edition

IEC 61322 Radiation Protection Instrumentation - InstalledDose Equivalent Rate Meters, Warning Assemblies andMonitors for Neutron Radiation of Energy fromThermal to 15 MeV First Edition

IEC 61323 Radiation Protection Instrumentation - NeutronRadiation - Direct Reading Personal Dose Equivalentand/or Dose Equivalent Rate Monitors First Edition

IEC 61325 Insulators for Overhead Lines with a NominalVoltage Above 1 000 V - Ceramic or Glass InsulatorUnits for D.C. Systems - Definitions, Test Methodsand Acceptance Criteria First Edition; CENELEC EN61325: 1995

IEC 61326-1 Electrical Equipment for Measurement, Control andLaboratory Use - EMC Requirements - Part 1: GeneralRequirements First Edition; Amendment 1-1998

IEC 61327 Helical-Scan Digital Composite Video CassetteRecording System Using 12,65 mm (0,5 in) MagneticTape - Format D-3 First Edition; CENELEC EN 61327: 1995; BS EN 61327: 1996

IEC TR 61328 Live Working - Installation of Transmission LineConductors and Earthwires - Stringing Equipment andAccessory Items First Edition; Corrigendum 01-1997

IEC 61329 Sound System Equipment - Methods of Measuring andSpecifying the Performance of Sounders (Electroacoustic Transducers for Tone Production) First Edition; CENELEC EN 61329: 1996

IEC 61330 High-Voltage/Low-Voltage Prefabricated SubstationsFirst Edition; CENELEC EN 61 330: 1996

IEC 61331-1 Protective Devices Against Diagnostic Medical X-Radiation Part 1: Determination of AttenuationProperties of Materials First Edition

IEC 61331-2 Protective Devices Against Diagnostic Medical X-Radiation Part 2: Protective Glass Plates FirstEdition

IEC 61332 Soft Ferrite Material Classification First Edition IEC 61333 Marking on U and E Ferrite Cores First Edition IEC TR 61334-1-1 Distribution Automation Using Distribution Line

Carrier Systems - Part 1: General Considerations - Section 1: Distribution Automation SystemArchitecture First Edition

IEC TR 61334-1-2 Distribution Automation Using Distribution LineCarrier Systems - Part 1-2: General Considerations - Guide for Specification First Edition

IEC TR 61334-1-4 Distribution Automation Using Distribution LineCarrier Systems - Part 1: General Considerations - Section 4: Identification of Data TransmissionParameters Concerning Medium and Low-VoltageDistribution Mains First Edition

IEC 61334-3-21 Distribution Automation Using Distribution LineCarrier Systems - Part 3: Mains Signalling


Requirements - Section 21: MV Phase-to-PhaseIsolated Capacitive Coupling Device First Edition

IEC 61334-4-1 Distribution Automation Using Distribution LineCarrier Systems - Part 4: Data CommunicationProtocols - Section 1: Reference Model of theCommunication System First Edition

IEC 61334-4-32 Distribution Automation Using Distribution LineCarrier Systems - Part 4: Data CommunicationProtocols - Section 32: Data Link Layer - LogicalLink Control (LLC) First Edition

IEC 61334-4-41 Distribution Automation Using Distribution LineCarrier Systems - Part 4: Data CommunicationProtocols - Section 41: Application Protocols - Distribution Line Message Specification FirstEdition

IEC 61334-4-42 Distribution Automation Using Distribution LineCarrier Systems - Part 4: Data CommunicationProtocols - Section 42: Application Protocols - Application Layer First Edition

IEC TR 61334-5-1 Distribution Automation Using Distribution LineCarrier Systems - Part 5: Lower Layer Profiles - Section 1: Spread Frequency Shift Keying (S-FSK) Profile First Edition

IEC TR 61334-5-2 Distribution Automation Using Distribution LineCarrier Systems - Part 5-2: Lower Layer Profiles - Frequency Shift Keying (FSK) Profile FirstEdition

IEC 61335 Nuclear Instrumentation - Bore-Hole Apparatus forX-Ray Fluorescence Analysis First Edition

IEC 61336 Nuclear Instrumentation - Thickness MeasurementSystems Utilizing Ionizing Radiation - Definitionsand Test Methods First Edition

IEC 61337-1-1 Filters Using Waveguide Type Dielectric Resonators - Part 1: General Information, Standard Values andTest Conditions - Section 1: General Informationand Standard Values First Edition

IEC 61338-1-1 Waveguide Type Dielectric Resonators - Part 1: General Information and Test Conditions - Section1: General Information First Edition

IEC 61340-4-1 Electrostatics - Part 4: Standard Test Methods forSpecific Applications - Section 1: ElectrostaticBehaviour of Floor Coverings and Installed FloorsFirst Edition

IEC 61341 Method of Measurement of Centre Beam Intensity andBeam Angle(s) of Reflector Lamps First Edition

IEC 61342 Nuclear Instrumentation - Multichannel Pulse HeightAnalyzers - Main Characteristics, TechnicalRequirements and Test Methods First Edition

IEC 61343 Nuclear Reactor Instrumentation - Boiling LightWater Reactors (BWR) - Measurements in the ReactorVessel for Monitoring Adequate Cooling within theCore First Edition

IEC 61344 Radiation Protection Instrumentation - MonitoringEquipment - Personal Warning Devices for X andGamma Radiations First Edition

IEC 61345 UV Test for Photovoltaic (PV) Modules First Edition IEC 61346-1 Industrial Systems, Installations and Equipment and

Industrial Products - Structuring Principles andReference Designations Part 1: Basic Rules FirstEdition; Cancels and Replaces IEC 750: 1983

IEC TR 61346-4 Industrial Systems, Installations and Equipment andIndustrial Products - Structuring Principles andReference Designations Part 4: Discussion ofConcepts First Edition


IEC TR 61354 Electricity Meters - Marking of Auxiliary Terminalsfor Tariff Devices First Edition

IEC 61355 Classification and Designation of Documents forPlants, Systems and Equipment First Edition

IEC 61356 Functional Evaluation of Electrical InsulationSystems - Principles for Test Procedures WhenComparative Testing is Not Feasible First Edition

IEC 61358 Acceptance Inspection for Direct ConnectedAlternating Current Static Watt-Hour Meters forActive Energy (Classes 1 and 2) First EditionCENELEC EN 61 358: 1996

IEC 61359 Evaluation and Identification of ElectricInsulation Systems - Environment Evaluation FirstEdition

IEC 61360-1 Standard Data Element Types with AssociatedClassification Scheme for Electric Components - Part 1: Definitions - Principles and MethodsFirst Edition; CENELEC EN 61360-1: 1995

IEC 61360-2 Standard Data Element Types with AssociatedClassification Scheme for Electric Components - Part 2: EXPRESS Dictionary Schema First Edition

IEC TR 61360-3 Standard Data Element Types with AssociatedClassification Scheme for Electric Components - Part 3: Maintenance and Validation ProceduresFirst Edition

IEC 61360-4 Standard Data Element Types with AssociatedClassification Scheme for Electric Components - Part 4: IEC Reference Collection of Standard DataElement Types, Component Classes and Terms FirstEdition

IEC TR 61361 Electricity Metering - Local and Remote DataExchange - Applications and Performance FirstEdition

IEC 61363-1 Electrical Installations of Ships and Mobile andFixed offshore Units - Part 1: Procedures forCalculating Short-Circuit Currents in Three-Phasea.c. First Edition

IEC TR 61366-1 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 1: Generaland Annexes First Edition

IEC TR 61366-2 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 2: Guidelinesfor Technical Specifications for Francis TurbinesFirst Edition

IEC TR 61366-3 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 3: Guidelinesfor Technical Specifications for Pelton TurbinesFirst Edition

IEC TR 61366-4 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 4: Guidelinesfor Technical Specifications for Kaplan andPropeller Turbines First Edition

IEC TR 61366-5 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 5: Guidelinesfor Technical Specifications for Tubular TurbinesFirst Edition

IEC TR 61366-6 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 6: Guidelinesfor Technical Specifications for Pump-TurbinesFirst Edition

IEC TR 61366-7 Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 7: Guidelinesfor Technical Specifications for Storage PumpsFirst Edition


IEC TR 61374 Overvoltages in Traction Supply Systems FirstEdition

IEC 61377 Electric Traction - Rolling Stock - CombinedTesting of Inverter-Fed Alternating Current Motorsand Their Control First Edition

IEC 61378-1 Convertor Transformers - Part 1: Transformers forIndustrial Applications First Edition

IEC TR 61382-1 Nickel/Cadmium Rechargeable Cells and Batteries forElectric Road Vehicle Propulsion Applications - Part 1: Dynamic Discharge Performance Test (DDPT) and Dynamic Endurance Test (DET) FirstEdition

IEC 61386-1 Conduit Systems for Electrical Installations - Part1: General Requirements First Edition

IEC TR 61390 Ultrasonics - Real-Time Pulse-Echo Systems - TestProcedures to Determine Performance SpecificationFirst Edition

IEC TR 61394 Overhead Lines - Characteristics of Greases forAluminium, Aluminium Alloy and Steel BareConductors First Edition

IEC 61395 Overhead Electrical Conductors - Creep TestProcedures for Stranded Conductors

IEC 61400-1 Wind Turbine Generator Systems - Part 1: SafetyRequirements First Edition

IEC 61400-2 Wind Turbine Generator Systems - Part 2: Safety ofSmall Wind Turbines First Edition

IEC 61400-12 Wind Turbine Generator Systems - Part 12: WindTurbine Power Performance Testing First Edition

IEC TR 61423-1 Heating Cables for Industrial Applications - Part1: Performance Requirements and Test Methods FirstEdition

IEC TR 61423-2 Heating Cables for Industrial Applications - Part2: Constructional and Material Requirements FirstEdition

IEC 61428 Nuclear Instrumentation - Sample Containers forGamma-Ray Spectrometry with Ge-Detectors FirstEdition

IEC 61429 Marking of Secondary Cells and Batteries with theInternational Recycling Symbol ISO 7000-1135 FirstEdition

IEC TR 61430 Secondary Cells and Batteries - Test Methods forChecking the Performance of Devices Designed forReducing Explosion Hazards - Lead-Acid StarterBatteries First Edition

IEC TR 61431 Guide for the Use of Monitor Systems for Lead-AcidTraction Batteries First Edition

IEC 61434 Secondary Cells and Batteries Containing Alkalineor Other Non-Acid Electrolytes - Guide to theDesignation of Current in Alkaline Secondary Celland Battery Standards First Edition

IEC 61435 Nuclear Instrumentation - High-Purity GeramaniumCrystals for Radiation Detectors First Edition

IEC 61436 Secondary Cells and Batteries Containing Alkalineor Other Non-Acid Electrolytes - Sealed Nickel-Metal Hydride Rechargeable Single Cells FirstEdition

IEC TR 61438 Possible Safety and Health Hazards in the Use ofAlkaline Secondary Cells and Batteries - Guide toEquipment Manufacturers and Users First Edition

IEC 61440 Secondary Cells and Batteries Containing Alkalineor Other Non-Acid Electrolytes - Sealed Nickel-Cadmium Small Prismatic Rechargeable Single CellsFirst Edition

IEC 61442 Electric Cables - Test Methods for Accessories for


Power Cables with Rated Voltages from 6 kV (Um=7,2kV) up to 30 kV (Um=36 kV) First Edition

IEC 61452 Nuclear Instrumentation - Measurement of Gamma-RayEmission Rates of Radionuclides - Calibration andUse of Germanium Spectrometers First Edition

IEC 61453 Nuclear Instrumentation - Thallium Activated SodiumIodide Detector Systems for Assay of Radionuclides - Calibration and Usage First Edition

IEC 61455 Nuclear Instrumentation - MCA Histogram DataInterchange Format for Nuclear Spectroscopy FirstEdition

IEC TR 61459 Low-Voltage Fuses - Coordination between Fuses andContactors/Motor-Starters - Application Guide FirstEdition

IEC TR 61463 Bushings - Seismic Qualification First Edition IEC 61466-1 Composite String Insulator Units for Overhead Lines

with a Nominal Voltage Greater Than 1 000 V - Part1: Standard Strength Classes and End Fittings FirstEdition

IEC TR 61467 Insulators for Overhead Lines with a NominalVoltage Above 1 000 V - AC Power Arc Tests onInsulator Sets First Edition; Corrigendum May 1997

IEC 61491 Electrical Equipment of Industrial Machines - Serial Data Link for Real-Time CommunicationBetween Controls and Drives First Edition

IEC 61496-1 Safety of Machinery - Electro-Sensitive ProtectiveEquipment - Part 1: General Requirements and TestsFirst Edition

IEC 61496-2 Safety of Machinery - Electro-Sensitive ProtectiveEquipment - Part 2: Particular Requirements forEquipment Using Active Opto-Electronic ProtectiveDevices (AOPDs) First Edition

IEC 61500 Nuclear Power Plants - Instrumentation and ControlSystems Important to Safety - FunctionalRequirements for Multiplexed Data TransmissionFirst Edition

IEC 61506 Industrial-Process Measurement and Control - Documentation of Application Software FirstEdition

IEC TR 61510 RBMK Nuclear Reactors - Proposals forInstrumentation and Control Improvements FirstEdition

IEC 61512-1 Batch Control - Part 1: Models and TerminologyFirst Edition

IEC 61515 Mineral Insulated Thermocouple Cables andThermocouples First Edition; CENELEC EN 61515: 1996

IEC 61525 Radiation Protection Instrumentation - X, Gamma, High Energy Beta and Neutron Radiations - DirectReading Personal Dose Equivalent and/or DoseEquivalent Rate Monitors First Edition

IEC 61526 Radiation Protection Instrumentation - Measurementof Personal Dose Equivalents Hp(10) and Hp(0,07) for X, Gamma and Beta Radiations - Direct ReadingPersonal Dose Equivalent and/or Dose EquivalentRate Dosemeters First Edition

IEC 61540 Electrical Accessories - Portable Residual CurrentDevices without Integral Overcurrent Protection forHousehold and Similar Use (PRCDs) First Edition

IEC 61543 Residual Current-Operated Protective Devices (RCDs) for Household and Similar Use - Electromagnetic Compatibility First Edition; CENELEC EN 61543: 1995

IEC 61545 Connecting Devices - Devices for the Connection ofAluminium Conductors in Clamping Units of Any


Material and Copper Conductors in Aluminium BodiedClamping Units First Edition

IEC 61547 Equipment for General Lighting Purposes - EMCImmunity Requirements First Edition (CENELEC EN61547: 1995)

IEC 61549 Miscellaneous Lamps First Edition; Amendment 104-1997

IEC 61557-1 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, Measuring or Monitoring ofProtective Measures - Part 1: General RequirementsFirst Edition

IEC 61557-2 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, Measuring or Monitoring ofProtective Measures - Part 2: Insulation ResistanceFirst Edition

IEC 61557-3 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, Measuring or Monitoring ofProtective Measures - Part 3: Loop Impedance FirstEdition

IEC 61557-4 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, Measuring or Monitoring ofProtective Measures - Part 4: Resistance of EarthConnection and Equipotential Bonding First Edition

IEC 61557-5 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, Measuring or Monitoring ofProtective Measures - Part 5: Resistance to EarthFirst Edition

IEC 61557-6 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, Measuring or Monitoring ofProtective Measures - Part 6: Residual CurrentDevices (RCD) in TT and TN Systems First Edition

IEC 61557-7 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testiong, Measuring or Monitoringof Protective Measures - Part 7: Phase SequenceFirst Edition

IEC 61557-8 Electrical Safety in Low Voltage DistributionSystems up to 1000 V a.c. and 1500 V d.c. - Equipment for Testing, Measuring or Monitoring ofProtective Measures - Part 8: Insulation MonitoringDevices for IT Systems First Edition

IEC 61558-1 Safety of Power Transformers, Power Supply Unitsand Similar - Part 1: General Requirements andTests First Edition; Amendment 1-1998

IEC 61558-2-1 Safety of Power Transformers, Power Supply Unitsand Similar - Part 2: Particular Requirements forSeparating Transformers for General Use FirstEdition

IEC 61558-2-2 Safety of Power Transformers, Power Supply Unitsand Similar - Part 2-2: Particular Requirements forControl Transformers First Edition

IEC 61558-2-4 Safety of Power Transformers, Power Supply Unitsand Similar - Part 2: Particular Requirements forIsolating Transformers for General Use FirstEdition

IEC 61558-2-5 Safety of Power Transformers, Power Supply Unitsand Similar - Part 2-5: Particular Requirements forShaver Transformers and Shaver Supply Units FirstEdition


IEC 61558-2-6 Safety of Power Transformers, Power Supply Unitsand Similar - Part 2: Particular Requirements forSafety Isolating Transformers for General Use

IEC 61558-2-7 Safety of Power Transformers, Power Supply Unitsand Similar - Part 2: Particular Requirements forTransformers for Toys First Edition

IEC 61558-2-17 Safety of Power Transformers, Power Supply Unitsand Similar - Part 2: Particular Requirements forTransformers for Switch Mode Power Supplies FirstEdition

IEC 61559 Radiation in Nuclear Facilities - CentralizedSystem for Continuous Monitoring of Radiation and/or Levels of Radioactivity First Edition

IEC 61560 Radiation Protection Instrumentation - Apparatusfor Non-Destructive Radiation Tests of Fur andOther Cloth Samples First Edition

IEC 61566 Measurement of Exposure to RadiofrequencyElectromagnetic Fields - Field Strength in theFrequency Range 100 kHz to 1 GHz First Edition

IEC 61580 Measurement of Return Loss on Waveguide andWaveguide Assemblies First Edition

IEC 61580-1 Methods of Measurement for Waveguides - Part 1: Decoupling and Rotation of the Plane ofPolarization First Edition

IEC 61580-2 Methods of Measurement for Waveguides - Part 2: Level of Intermodulation Products First Edition

IEC 61580-3 Methods of Measurement for Waveguides - Part 3: Variation of Group Delay First Edition

IEC 61580-7 Methods of Measurement for Waveguides - Part 7: Graphical Method for the Determination of WaveguidePerformance First Edition

IEC 61580-8 Methods of Measurement for Waveguides - Part 8: Waveguide Power Holding Capability First Edition

IEC 61580-9 Methods of Measurement for Waveguides - Part 9: Reflection Coefficient at Rectangular WaveguideInterfaces First Edition

IEC 61586 Estimation of the Reliability of ElectricalConnectors First Edition

IEC 61591 Household Range Hoods - Methods for MeasuringPerformance First Edition

IEC TR 61592 Household Electrical Appliances - Guidelines forConsumer Panel Testing First Edition

IEC 61595-1 Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel System, for Professional Use - Part1: Format A First Edition

IEC 61595-2 Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel System, for Professional Use - Part2: Format B First Edition

IEC 61596 Magnetic Oxide EP-Cores and Associated Parts forUse in Inductors and Transformers - DimensionsFirst Edition

IEC TR 61597 Overhead Electrical Conductors - CalculationMethods for Stranded Bare Conductors First Edition

IEC TR 61602 Connectors Used in the Field of Audio, Video andAudiovisual Engineering First Edition

IEC 61603-1 Transmission of Audio and/or Video and RelatedSignals Using Infra-Red Radiation - Part 1: GeneralFirst Edition; Corrigendum May 1997

IEC 61603-2 Transmission of Audio and /or Video and RelatedSignals Using Infra-Red Radiation - Part 2: Transmission Systems for Audio Wide Band andRelated Signals First Edition; Replaces IEC 764

IEC 61603-3 Transmission of Audio and/or Video and RelatedSignals Using Infra-Red Radiation - Part 3:


Transmission Systems for Audio Signals forConference and Similar Systems First Edition

IEC TR 61604 Dimensions of Uncoated Ring Cores of MagneticOxides First Edition

IEC 61605 Fixed Inductors for Use in Electronic andTelecommunication Equipment - Marking Codes FirstEdition

IEC 61606 Audio and Audiovisual Equipment - Digital AudioParts - Basic Methods of Measurement of AudioCharacteristics First Edition

IEC 61609 Microwave Ferrite Components - Guide for Draftingof Specifications First Edition

IEC 61610 Prints and Transparencies Produced from ElectronicSources - Assessment of Image Quality FirstEdition; CENELEC EN 61610: 1996

IEC 61619 Insulating Liquids - Contamination byPolychlorinated Biphenyls (PCBs) - Method ofDetermination by Capillary Column GasChromatography First Edition

IEC 61621 Dry, Solid Insulating Materials - Resistance Testto High-Voltage, Low-Current Arc Discharges FirstEdition

IEC TR 61624 Guidance on the Development of Lists of MaximumAllowable Temperatures for Polymeric Compounds Usedin Electrotechnical Equipment First Edition

IEC 61628-1 Corrugated Pressboard and Presspaper for ElectricalPurposes - Part 1: Definitions, Designations andGeneral Requirements First Edition

IEC 61629-1 Aramid Pressboard for Electrical Purposes - Part1: Definitions, Designations and GeneralRequirements First Edition

IEC 61629-2 Aramid Pressboard for Electrical Purposes - Part2: Methods of Test First Edition

IEC TR 61633 High-Voltage Alternating Current Circuit-Breakers - Guide for Short-Circuit and Switching TestProcedures for Metal-Enclosed and Dead TankCircuit-Breakers First Edition

IEC TR 61634 High-Voltage Switchgear and Controlgear - Use andHandling of Sulphur Hexafluoride (SF6) in High-Voltage Switchgear and Controlgear First Edition

IEC TR 61639 Direct Connection Between Power Transformers andGas-Insulated Metal-Enclosed Switchgear for RatedVoltages of 72,5 kV and Above First Edition

IEC TR 61641 Enclosed Low Voltage Switchgear and ControlgearAssemblies - Guide for Testing under Conditions ofArcing Due to Internal Fault First Edition

IEC 61642 Industrial a.c. Networks Affected by Harmonics - Application of Filters and Shunt Capacitors FirstEdition

IEC 61643-1 Surge Protective Devices Connected to Low-VoltagePower Distribution Systems - Part 1: PerformanceRequirements and Testing Methods First Edition

IEC 61646 Thin-Film Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval FirstEdition

IEC 61649 Goodness-of-Fit Tests, Confidence Intervals andLower Confidence Limits for Weibull DistributedData First Edition

IEC 61650 Reliability Data Analysis Techniques - Proceduresfor Comparison of Two Contant Failure Rates and TwoConstant Failure (Event) Intensities First Edition

IEC 61660-1 Short-Circuit Currents in d.c. AuxiliaryInstallations in Power Plants and Substations - Part 1: Calculation of Short-Circuit Currents


First Edition IEC 61660-2 Short-Circuit Currents in d.c. Auxiliary

Installations in Power Plants and Substations - Part 2: Calculation of Effects First Edition

IEC TR 61662 Assessment of the Risk of Damage Due to LightningFirst Edition; Amendment 1-1996

IEC 61666 Industrial Systems, Installations and Equipment andIndustrial Products - Identification of Terminalswithin a System First Edition

IEC 61674 Medical Electrical Equipment - Dosimeters withIonization Chambers and/or Semi-Conductor Detectorsas Used in X-ray Diagnostic Imaging First Edition

IEC 61675-1 Radionuclide Imaging Devices - Characteristics andTest Conditions - Part 1: Positron EmissionTomographs First Edition

IEC 61675-2 Radionuclide Imaging Devices - Characteristics andTest Conditions - Part 2: Single Photon EmissionComputed Tomographs First Edition

IEC 61675-3 Radionuclide Imaging Devices - Characteristics andTest Conditions - Part 3: Gamma Camera BasedWholebody Imaging Systems First Edition

IEC 61689 Ultrasonics - Physiotherapy Systems - PerformanceRequirements and Methods of Measurement in theFrequency Range 0,5 MHz to 5 MHz First Edition

IEC 61691-1 Design Automation - Part 1: VHDL Language ReferenceManual First Edition

IEC 61701 Salt Mist Corrosion Testing of Photovoltaic (PV) Modules First Edition

IEC 61702 Rating of Direct Coupled Photovoltaic (PV) PumpingSystems First Edition

IEC 61709 Electronic Components - Reliability - ReferenceConditions for Failure Rates and Stress Models forConversion First Edition

IEC 61721 Susceptibility of a Photovoltaic (PV) Module toAccidental Impact Damage (Resistance to ImpactTest) First Edition

IEC 61724 Photovoltaic System Performance Monitoring - Guidelines for Measurement, Data Exchange andAnalysis First Edition

IEC 61725 Analytical Expression for Daily Solar ProfilesFirst Edition

IEC TR 61726 Cable Assemblies, Cables, Connectors and PassiveMicrowave Components - Screening AttenuationMeasurement by the Reverberation Chamber MethodFirst Edition

IEC 61727 Photovoltaic (PV) Systems - Characteristics of theUtility Interface First Edition; CENELEC EN 61727: 1995

IEC 61733-1 Measuring Relays and Protection Equipment - Protection Communication Interfacing - Part 1: General First Edition; CENELEC EN 61733-1: 1996

IEC TR 61734 Application of IEC 60617-12 and IEC 60617-13Standards First Edition

IEC 61739 Integrated Circuits - Procedures for ManufacturingLine Approval and Quality Management FirstEdition; (IECQ QC 211000)

IEC 61747-1 Liquid Crystal and Solid-State Display Devices - Part 1: Generic Specification First Edition

IEC 61747-3 Liquid Crystal and Solid State Display Devices - Part 3: Sectional Specification for LiquidCrystal Display (LCD) Cells First Edition; QC720200

IEC 61747-3-1 Liquid Crystal and Solid-State Display Devices - Part 3-1: Liquid Crystal Display (LCD) Cells


- Blank Detail Specification First Edition; QC720201

IEC 61747-5 Liquid Crystal and Solid-State Display Devices - Part 5: Environmental, Endurance and MechanicalTest Methods First Edition

IEC 61751 Laser Modules Used for Telecommunication - Reliability Assessment First Edition

IEC 61754-1 Fibre Optic Connector Interfaces - Part 1: Generaland Guidance First Edition

IEC 61754-2 Fibre Optic Connector Interfaces - Part 2: TypeBFOC/2,5 Connector Family First Edition

IEC 61754-3 Fibre Optic Connector Interfaces - Part 3: Type LSAConnector Family First Edition

IEC 61754-4 Fibre Optic Connector Interfaces - Part 4: Type SCConnector Family First Edition

IEC 61754-5 Fibre Optic Connector Interfaces - Part 5: Type MTConnector Family First Edition

IEC 61754-6 Fibre Optic Connector Interfaces - Part 6: Type MUConnector Family First Edition; Corrigendum August1997

IEC 61754-7 Fibre Optic Connector Interfaces - Part 7: Type MPOConnector Family First Edition

IEC 61754-8 Fibre Optic Connector Interfaces - Part 8: CF08Connector Family First Edition

IEC 61754-9 Fibre Optic Connector Interfaces - Part 9: Type DSConnector Family First Edition

IEC 61760-2 Surface Mounting Technology - Part 2: Transportation and Storage Conditions of SurfaceMounting Devices (SMD) - Application Guide FirstEdition

IEC 61771 Nuclear Power Plants - Main Control-Room - Verification and Validation of Design FirstEdition

IEC 61772 Nuclear Power Plants - Main Control Room - Application of Visual Display Units (VDU) FirstEdition

IEC 61773 Overhead Lines - Testing of Foundations forStructures First Edition; Corrigendum-March 1997

IEC TR 61774 Overhead lines - Meteorological Data for AssessingClimatic Loads First Edition

IEC 61779-1 Electrical Apparatus for the Detection andMeasurement of Flammable Gases - Part 1: GeneralRequirements and Test Methods First Edition

IEC 61779-2 Electrical Apparatus for the Detection andMeasurement of Flammable Gases - Part 2: Performance Requirements for Group I ApparatusIndicating a Volume Fraction Up to 5% Methane inAir First Edition

IEC 61779-3 Electrical Apparatus for the Detection andMeasurement of Flammable Gases - Part 3: Performance Requirements for Group I ApparatusIndicating a Volume Fraction Up to 100% Methane inAir First Edition

IEC 61779-4 Electrical Apparatus for the Detection andMeasurement of Flammable Gases - Part 4: Performance Requirements for Group II ApparatusIndicating a Volume Fraction Up to 100% LowerExplosive Limit First Edition

IEC 61779-5 Electrical Apparatus for the Detection andMeasurement of Flammable Gases - Part 5: Performance Requirements for Group II ApparatusIndicating a Volume Fraction Up to 100% Gas FirstEdition

IEC 61788-1 Superconductivity - Part 1: Critical Current


Measurement - DC Critical Current of Cu/Nb-TiComposite Superconductors First Edition

IEC 61797-1 Transformers and Inductors for Use inTelecommunication and Electronic Equipment - MainDimensions of Coil Formers - Part 1: Coil Formersfor Laminated Cores First Edition

IEC 61800-1 Adjustable Speed Electrical Power Drive Systems - Part 1: General Requirements - RatingSpecifications for Low Voltage Adjustable Speedd.c. Power Drive Systems First Edition

IEC 61800-2 Adjustable Speed Electrical Power Drive Systems - Part 2: General Requirements - RatingSpecifications for Low Voltage Adjustable Frequencya.c. Power Drive Systems First Edition

IEC 61800-3 Adjustable Speed Electrical Power Drive Systems - Part 3: EMC Product Standard Including SpecificTest Methods First Edition

IEC 61810-1 Electromechanical Non-Specified Time All-or-NothingRelays - Part 1: General Requirements First Edition

IEC 61810-5 Electromechanical Non-Specified Time All-or-NothingRelays - Part 5: Insulation Coordination FirstEdition

IEC 61810-7 Electromechanical All-or-Nothing Relays - Part 7: Test and Measurement Procedures First Edition

IEC 61811-50 Electromechanical All-Or-Nothing Relays - Part 50: Sectional Specification - Electromechanical All-Or-Nothing Telecom Relays of Assessed Quality FirstEdition; IECQ QC 160500

IEC 61811-51 Electromechanical All-Or-Nothing Relays - Part 51: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - Non-Standardized Types and Construction FirstEdition; QC 160501

IEC 61811-52 Electromechanical All-Or-Nothing Relays - Part 52: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - TwoChange-Over Contacts, 20 mm x 10 mm Base FirstEdition; QC 160502

IEC 61811-53 Electromechanical All-or-Nothing Relays - Part 53: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - TwoChange-Over Contacts, 14 mm x 9 mm Base FirstEdition; QC 160503

IEC 61811-54 Electromechanical All-Or-Nothing Relays - Part 54: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - TwoChange-Over Contacts, 15 mm x 7,5 mm Base FirstEdition; QC 160504

IEC 61812-1 Specified Time Relays for Industrial Use - Part 1: Requirements and Tests First Edition

IEC TR 61816 Resistance to Rusting of Protected Steel Surfaces - Assessment Test First Edition

IEC 61829 Crystalline Silicon Photovoltaic (PV) Array - On-Site Measurement of I-V Characteristics FirstEdition

IEC 61830 Microwave Ferrite Components - Measuring Methodsfor Major Properties First Edition

IEC TR 61836 Solar Photovoltaic Energy Systems - Terms andSymbols First Edition

IEC TR 61841 Alkaline Secondary Cells and Batteries - SealedNickel-Cadmium Cylindrical Rechargeable SingleCells First Edition

IEC 61843 Measuring Method for the Level of IntermodulationProducts Generated in a Gyromagnetic Device First


Edition IEC 61846 Ultrasonics - Pressure Pulse Lithotripters

- Characteristics of Fields First Edition IEC 61847 Ultrasonics - Surgical Systems - Measurement and

Declaration of the Basic Output CharacteristicsFirst Edition

IEC 61852 Medical Electrical Equipment - Digital Imaging andCommunications in Medicine (DICOM) - RadiotherapyObjects First Edition

IEC TR 61859 Guidelines for Radiotherapy Treatment Rooms DesignFirst Edition

IEC 61866 Audiovisual Systems - Interactive Text TransmissionSystem (ITTS) First Edition

IEC 61880 Video Systems (525/60) - Video and Accompanied DataUsing the Vertical Blanking Interval - AnalogueInterface First Edition

IEC 61883-1 Consumer Audio/Video Equipment - Digital Interface - Part 1: General First Edition

IEC 61883-2 Consumer Audio/Video Equipment - Digital Interface - Part 2: SD-DVCR Data Transmission First Edition

IEC 61883-3 Consumer Audio/Video Equipment - Digital Interface - Part 3: HD-DVCR Data Transmission First Edition

IEC 61883-4 Consumer Audio/Video Equipment - Digital Interface - Part 4: MPEG2-TS Data Transmission First Edition

IEC 61883-5 Consumer Audio/Video Equipment - Digital Interface - Part 5: SDL-DVCR Data Transmission First Edition

IEC PAS 61883-6 Consumer Audio/Video Equipment - Digital Interface - Part 6: Audio and Music Data TransmissionProtocol Edition 1.0; Publicly AvailableSpecification

IEC 61892-7 Mobile and Fixed Offshore Units - ElectricalInstallations - Part 7: Hazardous Areas FirstEdition

IEC TR 61917 Cables, Cable Assemblies and Connectors - Introduction to Electromagnetic (EMC) ScreeningMeasurements First Edition

IEC 61920 Infrared Transmission Systems - Free AirApplications First Edition

IEC 61923 Household Electrical Appliances - Method ofMeasuring Performance - Assessment of Repeatabilityand Reproducibility First Edition

IEC 61938 Audio, Video and Audiovisual Systems - Interconnections and Matching Values - PreferredMatching Values of Analogue Signals First Edition; Cancels and Replaces IEC 1938: 1996 and IEC 574-4: 1982

IEC 61942 Live Working - Gloves and Mitts with MechanicalProtection First Edition

IEC 61950 Cable Management Systems - Specification forConduit Fittings for Electrical Installations forExtra-Heavy Duty Metal Conduit First Edition

IEC 61953 Diagnostic X-Ray Imaging Equipment - Characteristics of Mammographic Anti-ScatterGrids First Edition

IEC 61989 AMD 1 Programming Languages - COBOL Amendment 1: Intrinsic Function Module 1992

IEC 61989 AMD 2 Programming Languages - COBOL Amendment 2: Correction and Clarification Amendment for COBOL1994

IEC 62007-1 Semiconductor Optoelectronic Devices for FibreOptic System Applications - Part 1: EssentialRatings and Characteristics First Edition

IEC 62007-2 Semiconductor Optoelectronic Devices for FibreOptic System Applications - Part 2: Measuring


Methods First Edition IEC 62053-31 Electricity Metering Equipment (a.c.) - Particular

Requirements - Part 31: Pulse Output Devices forElectromechanical and Electronic Meters (Two WiresOnly) First Edition

IEC 62053-61 Electricity Metering Equipment (a.c.) - ParticularRequirements - Part 61: Power Consumption andVoltage Requirements First Edition

IEC 62326-1 Printed Boards - Part 1: Generic Secification FirstEdition; IECQ QC 230000

IEC 62326-4 Printed Boards - Part 4: Rigid Multilayer PrintedBoards with Interlayer Connections - SectionalSpecification First Edition; IECQ QC 230500

IEC 62326-4-1 Printed Boards - Part 4: Rigid Multilayer PrintedBoards with Interlayer Connections - SectionalSpecification - Section 1: Capability DetailSpecification - Performance Levels A, B and C FirstEdition; IECQ QC 230401

IEC GUIDE 2 Standardization and Related Activities - GeneralVocabulary Seventh Edition

IEC GUIDE 3 Identification of National Standards That AreEquivalent to International Standards SecondEdition

IEC GUIDE 7 Guidelines for Drafting of Standards Suitable forUse for Conformity Assessment Second Edition; SAA/SNZ HB18.7: 1994

IEC GUIDE 14 Product Information for Consumers IEC GUIDE 15 ISO/IEC Code of Principles on "Reference to

Standards" First Edition IEC GUIDE 21 Adoption of International Standards in National

Standards Addendum 1 Indication of the Degree ofEquivalence between National Standards andInternational Standards First Edition; Addendum1-1983

IEC GUIDE 22 General Criteria for Supplier's Declaration ofConformity Second Edition

IEC GUIDE 23 Methods of Indicating Conformity with Standards forThird-Party Certification Systems First Edition; SANZ/SAA HB18.23: 1991

IEC GUIDE 28 General Rules for a Model Third-Party CertificationSystem for Products First Edition; SANZ/SAAHB18.28: 1991

IEC GUIDE 36 Preparation of Standard Methods of MeasuringPerformance (SMMP) of Consumer Goods First Edition

IEC GUIDE 37 Instructions for Use of Products of ConsumerInterest Second Edition

IEC GUIDE 40 General Requirements for the Acceptance ofCertification Bodies First Edition (SANZ/SAAHB18.40: 1991) (Withdrawn) (Replaced by ISO/IECGuide 65)

IEC GUIDE 42 Guidelines for a Step-by-Step Approach to anInternational Certification System First Edition; SANZ/SAA HB18.42: 1991

IEC GUIDE 43-1 Proficiency Testing by InterlaboratoryComparisions - Part 1: Development and Operation ofLaboratory Proficiency Testing Schemes SecondEdition

IEC GUIDE 43-2 Proficiency Testing by InterlaboratoryComparisions - Part 2: Selection and Use ofProficiency Testing Schemes by laboratoryAccreditation Bodies First Edition

IEC GUIDE 44 General Rules for ISO or IEC International Third-Party Certification Schemes for Products FirstEdition; SANZ/SAA HB18.44: 1991


IEC GUIDE 46 Comparative Testing of Consumer Products andRelated Services - General Principles First Edition

IEC GUIDE 59 Code of Good Practice for Standardization FirstEdition

IEC GUIDE 60 Code of Good Practice for Conformity AssessmentFirst Edition; SAA/SNZ HB18.60: 1995

IEC GUIDE 61 General Requirements for Assessment andAccreditation of Certification/Registration BodiesFirst Edition; SAA/SNZ HB18.61: 1996

IEC GUIDE 62 General Requirements for Bodies OperatingAssessment and Certification/Registration ofQuality Systems First Edition; SAA/SNZ HB18.62: 1996; Cancels and Replaces Guide 48; 1986

IEC GUIDE 65 General Requirements for Bodies Operating ProductCertification Systems First Edition; Cancels andReplaces ISO/IEC Guide 40: 1983

IEC GUIDE 102 Electronic Components - Specification Structuresfor Quality Assessment (Qualification Approval andCapability Approval) Fourth Edition (IECQ GUIDE102)

IEC GUIDE 103 Guide on Dimensional Co-Ordination First Edition IEC GUIDE 104 Preparation of Safety Publications and the Use of

Basic Safety Publications and Group SafetyPublications Third Edition

IEC GUIDE 105 Principles Concerning the Safety of EquipmentElectrically Connected to a TelecommunicationsNetwork First Edition

IEC GUIDE 106 Guide for Specifying Environmental Conditions forEquipment Performance Rating Second Edition

IEC GUIDE 107 Electromagnetic Compatibility - Guide to theDrafting of Electromagnetic CompatibilityPublications Second Edition

IEC GUIDE 108 Relationship Between Technical Committees withHorizontal Functions and Product Committees and theUse of Basic Publications First Edition

IEC GUIDE 109 Environmental Aspects - Inclusion inElectrotechnical Product Standards First Edition

IEC GUIDE 110 Home Control Systems - Guidelines Relating toSafety First Edition

IEC CISPR 10 Organization, Rules and Procedures of the CISPRFourth Edition; Corrigendum-01/1994; Amendment1-1995; Corrigendum-1995

IEC CISPR 11 Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment - Electromagnetic DisturbanceCharacteristics - Limits and Methods of MeasurementThird Edition

IEC CISPR 12 Vehicles, Motorboats and Spark-Ignited Engine-Driven Devices - Radio Disturbance Characteristics - Limits and Methods of Measurement Fourth Edition

IEC CISPR 13 Limits and Method of Measurement of RadioInterference Characteristic of Sound and TelevisionBroadcast Receivers and Associated Equipment ThirdEdition

IEC CISPR 14 Limits and Methods of Measurement of RadioDisturbance Characteristics of Electrical Motor-Operated and Thermal Appliances for Household andSimilar Purposes, Electric Tools and ElectricApparatus Third Edition; CEN EN 55014; AS/SNZ1044: 1995; Amendment 1-1996; Corrigendum 1-1997

IEC CISPR 14-2 Electromagnetic Compatibility - Requirements forHousehold Appliances, Electric Tools and SimilarApparatus - Part 2: Immunity - Product FamilyStandard First Edition

IEC CISPR 15 Limits and Methods of Measurement of Radio


Disturbance Characteristics of Electrical Lightingand Similar Equipment Fifth Edition; Amendment 106-1997

IEC CISPR 16-1 Specification for Radio Disturbance and ImmunityMeasuring Apparatus and Methods Part 1: RadioDisturbance and Immunity Measuring Apparatus FirstEdition; AS/NZS 1052.1: 1995

IEC CISPR 16-2 Specification for Radio Disturbance and ImmunityMeasuring Apparatus and Methods Part 2: Methods ofMeasurement of Disturbances and Immunity FirstEdition

IEC CISPR 17 Methods of Measurement of the SuppressionCharacteristics of Passive Radio InterferenceFilters and Suppression Components First Edition

IEC CISPR 18-1 Radio Interference Characteristics of OverheadPower Lines and High-Voltage Equipment Part 1: Description of Phenomena First Edition

IEC CISPR 18-2 Radio Interference Characteristics of OverheadPower Lines and High-Voltage Equipment Part 2: Methods of Measurement and Procedure forDetermining Limits First Edition; Amendment1-1993; Amendment 2-1996

IEC CISPR 18-3 Radio Interference Characteristics of OverheadPower Lines and High-Voltage Equipment Part 3: Codeof Practice for Minimizing the Generation of RadioNoise First Edition; Amendment 1-1996

IEC CISPR 19 Guidance on the Use of the Substitution Method forMeasurements of Radiation from Microwave Ovens forFrequencies Above 1 GHz First Edition; AS/NZS4052: 1992

IEC CISPR 20 Limits and Methods of Measurement of ImmunityCharacteristics of Sound and Television BroadcastReceivers and Associated Equipment Third Edition; AS/NZS 3951.10: 1994; Amendment 1-02/1997; Amendment 2-08/1997

IEC CISPR 21 Interference to Mobile Radiocommunications in thePresence of Impulsive Noise; Methods of JudgingDegradation and Measures to Improve PerformanceFirst Edition

IEC CISPR 22 Information Technology Equipment - RadioDisturbance Characteristics - Limits and Methods ofMeasurements Third Edition

IEC CISPR 23 Determination of Limits for Industrial, Scientificand Medical Equipment First Edition

IEC CISPR 24 Information Technology Equipment - ImmunityCharacteristics - Limits and Methods of MeasurementFirst Edition

IEC CISPR 25 Limits and Methods of Measurement of RadioDisturbance Characteristics for the Protection ofReceivers Used on Board Vehicles First Edition

IEC CISPR 1000-6-3 Electromagnetic Compatability (EMC) - Part 6: Generic Standards - Section 3: Emission Standardfor Residential, Commercial and Light-IndustrialEnvironments First Edition

IEC CISPR TR 28 Industrial, Scientific and Medical Equipment (ISM) - Guidelines for Emission Levels within the BandsDesignated by the ITU First Edition

IEC 60001/1675 (DRAFT) Amendment No.1 to IEC 50(191): Dependability and Quality of Service - Part 1: Dependability: Common Terms - Part 3: Dependabilityand Quality of Service in Electric Power Systems

IEC 60001/1676 (DRAFT) IEV Chapter 826: "Electricalinstallationsof Buildings" - Modification of the Terms 826-01-05and 826-01-06

IEC 60001/1677 (DRAFT) Amendment No.1 to IEV Chapter 723:


Broadcasting: Sound, Television, Data - Section723-10: Digital Television

IEC 60003B/220 (DRAFT) Design of Graphical Symbols for Use in theTechnical Documentation of Products - Part 2: Specification for Graphical Symbols in a ComputerSensible Form, Including Graphical Symbols for aReference Library, and Requirements for theirInterchange

IEC 60013/1134 (DRAFT) Pulse Output Devices for Induction orStatic Meters (2 Wires Only)

IEC 60013/1135 (DRAFT) Static Electric Energy Meters - PowerConsumption and Voltage Requirements - Multi-Energyand Multi-Function Meters

IEC 60013/1152 (DRAFT) Amendment 2 to IEC 61037 IEC 60013/1154 (DRAFT) Amendment 2 IEC 60015C/816 (DRAFT) Pressure Sensitive Adhesive Tapes for

Electrical Purposes - Part 3: Specifications forIndividual Materials - Sheet 11: Combination TapesMade of Creped Cellulosic Paper and PolyethyleneTerephtalate Film with Rubber ThermosettingAdhesive

IEC 60015C/843 (DRAFT) Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheet 136: Extruded Fluorosilicone Sleeving - General Purpose

IEC 60015C/875 (DRAFT) Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 212: Heat-Shrinkable, Polyolefin Sleeving, Flame Retarded, Shrink Ratio 2:1

IEC 60015C/881 (DRAFT) Flexible Insulating Sleeving - Part 3: Specification Requirements for Individual Types ofSleeving - Sheet 217: Heat-Shrinkable PolyolefinSleeving, Flame Retarded, Shrink Ratio 3:1

IEC 60015C/887 (DRAFT) Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 228: Heat-Shrinkable Semi-Rigid, Polyvinylidene Fluoride Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1

IEC 60015C/957 (DRAFT) Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 151: Extruded PVC/Nitrile Rubber - GeneralPurpose

IEC 60015C/958 (DRAFT) Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 218: Heat-Shrinkable Polyolefin Sleeving, Not Flame Retarded, Shrink Ratio 3:1

IEC 60015C/959 (DRAFT) Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 233: Heat-Shrinkable FluoroelastomerSleeving, Flame Retarded, Fluid Resistant, ShrinkRatio 2:1

IEC 60015C/960 (DRAFT) Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 271: Heat-Shrinkable Elastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1

IEC 60015C/961 (DRAFT) Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 272: Heat-Shrinkable Elastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1, Thin Wall

IEC 60015C/968 (DRAFT) Non-Impregnated Densified Laminated Woodfor Electrical Purposes - Part 3: Specificationsfor Individual Materials - Sheet 1: Sheets Producedfrom Beech Veneer

IEC 60017A/512 (DRAFT) High-Voltage Switches - Part 1: Switches


for Rated Voltages Above 1 kV and Less Than 52 kV IEC 60017B/855 (DRAFT) Amendment No.1 IEC 60017B/898 (DRAFT) Amendment 2 to IEC 60947-1 IEC 60017D/201 (DRAFT) Amendment 1 to IEC 60439-5 - Test of Base

of Cable Distribution Cabinets (CDC) IEC 60018/831 (DRAFT) Electrical Installations of Ships and of

Mobile and Fixed Offshore Units - Part 1: Procedures for Calculating Short-Circuits Currentsin Tree-Phase a.c.

IEC 60020/328 (DRAFT) Amendment to IEC 811-2-1 (First Edition) IEC 60020A/382 (DRAFT) Amendment No.1 IEC 60020A/383 (DRAFT) Amendment No.1 IEC 60020B/254 (DRAFT) Amendment No.2 to Sub-Clause 3.1.1 of IEC

227-1 (Marking Distance) IEC 60020B/255 (DRAFT) Extension of IEC 227-5 with 90 Degrees

Celsius Sheathed PVC Cables IEC 60020B/256 (DRAFT) Amendment No.2 IEC 60020B/257 (DRAFT) Amendment No.2 IEC 60020B/259 (DRAFT) Rubber Insulated Cables - Rated Voltages Up

to and Including 450/750 V - Part 8: Cords forApplications Requiring High Flexibility

IEC 60021A/224 (DRAFT) Secondary Cells and Batteries ContainingAlkaline or Other Non-Acid Electrolytes - SealedNickel-Metal Hydride Rechargeable Single Cells

IEC 60022G/39 (DRAFT) Adjustable Speed Electrical Power DriveSystems - Part 1: Rating Specifications for LowVoltage d.c. Power Drive Systems

IEC 60022G/40 (DRAFT) Adjustable Speed Electrical Power DriveSystems - Part 2: General Requirements - RatingSpecifications for Low Voltage Adjustable Frequencya.c. Power Drive Systems

IEC 60023/247 (DRAFT) Electrical Accessories for Household andSimilar Use - Electromagnetic Compatibility (EMC)

IEC 60029/401 (DRAFT) Amendment 1 to IEC 60118-4, Magnetic FieldStrength in Audio-Frequency Induction Loops forHearing Aid Purposes

IEC 60029/402 (DRAFT) Electroacoustics - Simulators of Human Headand Ear - Part 1: Ear Simulator for the Calibrationof Supra-Aural Earphones

IEC 60031/248 (DRAFT) Electrical Apparatus for Explosive GasAtmospheres - Part 0: General Requirements

IEC 60031A/71 (DRAFT) Amendment to 60079-1: Breathing andDraining Devices When Used on Components forGeneral and Particular Use

IEC 60031A/71 (DRAFT) Amendment 2 IEC 60032B/299 (DRAFT) Amendment No.1 to IEC 60269-2-1 IEC 60033/289 (DRAFT) Power Capacitors for Induction Heating

Installations - Part 1: General IEC 60034A/774 (DRAFT) Amendment No.2 to IEC 630: Maximum Lamp

Outlines for Incandescent Lamps IEC 60034A/814 (DRAFT) Standard Method of Measurement of Lamp Cap

Temperature Rise IEC 60034A/818 (DRAFT) Amendment 3 IEC 60034B/733 (DRAFT) Miscellaneous Lampholders - Part 1: General

Requirements and Tests IEC 60034B/779 (DRAFT) Amendment 1 to IEC 60838-2-1 IEC 60034D/471 (DRAFT) Amendment No.2 to IEC 598-2-19 IEC 60034D/472 (DRAFT) Amendment No.1 to IEC 598-2-8 IEC 60034D/475 (DRAFT) Amendment No.1 IEC 60034D/476 (DRAFT) Luminaires - Part 2-5: Particular

Requirements - Floodlights IEC 60034D/477 (DRAFT) Amendment No.1 IEC 60037A/63 (DRAFT) Surge-Protective Devices Connected to Low-

Voltage Power Distribution Systems - Part 1: Performance Requirements and Testing Methods


IEC 60040/920 (DRAFT) Rivision of IEC 286-4 (1991): Packaging ofComponents for Automatic Handling - Part 4: StickMagazines for Electronic Components Encapsulated inPackages of Form E and G

IEC 60040/1042 (DRAFT) Amendment No.3 to IEC 60384-4 IEC 60045/429 (DRAFT) Nuclear Instrumentation - Sample Containers

for Gamma-ray Spectrometry with Ge-Detectors IEC 60045B/222 (DRAFT) Radiation Protection Instrumentation

- Measurement of Personal Dose Equivalents HP(10) and HP(0,07) for X, Gamma and Beta Radiations - Direct Reading Personal Dose Equivalent and/orDose Equivalent Rate Dosemeters

IEC 60047A/502 (DRAFT) Semiconductor Devices - IntegratedCircuits - Part 2: Digital Integrated Circuits

IEC 60047C/190 (DRAFT) Semiconductor Devices - Part 12: Optoelectronic Devices - Section 3: Blank DetailSpecification for Light-Emitting Diodes DisplayApplication

IEC 60047C/200 (DRAFT) Liquid Crystal and Solid-State DisplayDevices - Part: Generic Specification

IEC 60047C/203 (DRAFT) Liquid Crystal and Solid-State DisplayDevices - Part 5: Environmental, Endurance andMechanical Test Methods

IEC 60047D/208 (DRAFT) Mechanical Standardization of SemiconductorDevices - Part 3: General Rules for the Preparationof Outline Drawings of Integrated Circuits

IEC 60048B/652 (DRAFT) Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for InterconnectionDevices Which Permit Multidirectional Mating, forUse with Rechargeable Batteries

IEC 60049/385 (DRAFT) Quartz Crystal Controlled Oscillators ofAssessed Quality - Part 1: Generic Specification

IEC 60049/386 (DRAFT) Quartz Crystal Controlled Oscillators ofAssessed Quality - Part 4: Sectional Specification - Capability Approval

IEC 60049/396 (DRAFT) Quartz Crystal Controlled Oscillators ofAssessed Quality - Part 5: Sectional Specification - Qualification Approval

IEC 60049/403 (DRAFT) Quartz Crystal Controlled Oscillators ofAssessed Quality - Part 5-1: Blank DetailSpecification - Qualification Approval

IEC 60049/409 (DRAFT) Waveguide Type Dielectric Resonators - Part1-2: Test Conditions

IEC 60052/758 (DRAFT) Printed Boards and Printed BoardAssemblies - Design and Use - Part 1-2: GenericRequirements - Controlled Impedance

IEC 60055/615 (DRAFT) Amendment No.1 IEC 60055/616 (DRAFT) Specifications for Particular Types of

Winding Wires - Part 27: Paper Tape CoveredRectangular Copper Wire

IEC 60055/617 (DRAFT) Packaging of Winding Wires - Part 4-1: Methods of Test - Delivery Spools Made fromThermoplastic Materials

IEC 60057/327 (DRAFT) Telecontrol Equipment and Systems - Part5-103: Transmission Protocols - Companion Standardfor the Informative Interface of ProtectionEquipment

IEC 60057/355 (DRAFT) Distribution Automation Using DistributionLine Carrier Systems - Part 4-33: DataCommunication Protocols - Data Link Layer - Connection Oriented Protocol

IEC 60057/356 (DRAFT) Distribution Automation Using DistributionLine Carrier Systems - Part 4-61: DataCommunication Protocols - Network Layer - Connectionless Protocol


IEC 60059C/81 (DRAFT) Amendment 1 to IEC 60675 IEC 60059F/84 (DRAFT) Vacuum Cleaners for Household Use - Methods

of Measuring the Performance IEC 60061/1340 (DRAFT) Amendment No.1 to IEC 60335-2-9 IEC 60061/1342 (DRAFT) Amendment No.1 to IEC 335-2-2 - Particular

Requirements for Vacuum Cleaners and Water SuctionCleaning Appliances - Clauses 1,2,6,19,30

IEC 60061/1343 (DRAFT) Amendment No.1 to IEC 335-2-7 - ParticularRequirements for Washing Machines - Sub-Clauses22.103, 24.101

IEC 60061/1344 (DRAFT) Amendment to IEC 335-2-11 (1993) - Particular Requirements for Tumble Dryers, Sub-Clause 11.8

IEC 60061/1353 (DRAFT) Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forFabric Steamers

IEC 60061/1360 (DRAFT) Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forDrives for Vertically Moving Garage Doors forResidential Use

IEC 60061/1367 (DRAFT) Safety of Household and Similar ElectricalAppliances - Part 2: Particular Requirements forDrives for Rolling Closure Devices, Awnings andSimilar Devices

IEC 60061F/235 (DRAFT) Safety of Transportable Motor-OperatedElectric Tools - Part 2-10: Particular Requirementsfor Cutting-Off Grinders

IEC 60061H/122 (DRAFT) Safety of Household and Similar ElectricalAppliances - Part 2-86: Particular Requirements forElectric Fishing Machines

IEC 60062/99 (DRAFT) Medical Electrical Equipment - SafetyRequirements for Appliances with Human Body ContactElectrodes Intended for Use without MedicalSupervision

IEC 60062B/329 (DRAFT) Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of High-Voltage Generators of Diagnostic X-Ray Generators

IEC 60062C/205 (DRAFT) Radionuclide Imaging Devices - Characteristics and Test Conditions - Part 1: Positron Emission Tomographs

IEC 60062C/206 (DRAFT) Radionuclide Imaging Devices - Characteristics and Test Conditions - Part 2: Single Photon Emission Computer Tomographs

IEC 60062C/232 (DRAFT) Medical Electrical Equipment - Part 2-1: Particular Requirements for the Safety of ElectronAccelerators in the Range of 1 MeV to 50 MeV

IEC 60062D/249 (DRAFT) Medical Electrical Equipment - Part 2: Particular Requirements for the Safety ofAnaesthetic Machines

IEC 60062D/250 (DRAFT) Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of InfusionPumps and Controllers

IEC 60062D/276 (DRAFT) Medical Electrical Equipment - Part 2-46: Particular Requirements for the Safety of OperatingTables

IEC 60065B/319 (DRAFT) Industrial-Process Control Valves - Part2: Flow Capacity - Section 3: Test Procedures

IEC 60065B/320 (DRAFT) Process Measurement and Control Devices - General Methods and Procedures for EvaluatingPerformance - Part 3: Tests for the Effects ofInfluence Quantities

IEC 60068/175 (DRAFT) Magnetic Materials - Part 8-2: Specifications for Individual Materials - Specification for Cold-Rolled Electrical AlloyedSteel Sheet and Strip Delivered in the Semi-


Processed State IEC 60068/176 (DRAFT) Magnetic Materials - Part 8-3:

Specification for Individual Materials - ColdRolled Electrical Non-Alloyed Steel Sheet and StripDelivered in Semi-Processed State

IEC 60068/177 (DRAFT) Magnetic Materials - Part 8-7: Specification for Individual Materials - Cold-Rolled Grain-Oriented Electrical Steel Sheet andStrip Delivered in Fully-Processed State

IEC 60068/178 (DRAFT) Magnetic Materials - Part 8-4: Specifications for Individual Materials - Cold-Rolled Non-Oriented Electrical Steel Sheet andStrip Delivered in Fully-Processed State

IEC 60070/82 (DRAFT) Test Probes to Verify Protection byEnclosures

IEC 60077A/201 (DRAFT) Electromagnetic Compatability (EMC) - Part4-16: Testing and Measurement Techniques - Test forImmunity to Conducted, Common Mode Disturbances inthe Frequency Range 0 Hz to 150 kHz

IEC 60077B/216 (DRAFT) Amendment No.1 IEC 60077B/234 (DRAFT) Amendment 1 IEC 60077B/235 (DRAFT) Amendment 2 IEC 60080/146 (DRAFT) Global Maritime Distress and Safety System

(GMDSS) - Part 5: Inmarsat-E - Emergency PositionIndicating Radio Beacon (EPIRB) Operating Throughthe Inmarsat System - Operational and PerformanceRequirements, Methods of Testing and Required TestResults

IEC 60080/147 (DRAFT) Global Maritime Distress and Safety System (GMDSS) - Part 9: Shipborne Transmitters andReceivers for Use in the MF and HF Bands Suitablefor Telephony, Digital Selective Calling (DSC) andNarrow Band Direct Printing (NBDP) - Operationaland Perfomance Requirements, Methods of Testing andRequired Test Results

IEC 60080/179 (DRAFT) Maritime Navigation and RadiocommunicationEquipment and Systems- Global Navigation SatelliteSyatems (GNSS) - Part 2: Global NavigationSatellite System (GLONASS) - Receiver Equipment -Performance Standards, Methods of Testing andRequired Test Results

IEC 60081/109 (DRAFT) Protection of Structures Against Lighting - Part 1: General Principles - Section 2: Guide B: Design, Construction, Maintenance and Inspection ofLighting Protection Systems

IEC 60082/189 (DRAFT) Photovoltaic System Performance Monitoring - Guidelines for Measurement, Data Exchange andAnalysis

IEC 60086A/414 (DRAFT) Amendment No.2 IEC 60086A/415 (DRAFT) Amendment No.2 to IEC 60793-1-4 IEC 60086B/1040 (DRAFT) Fibre Optic Interconnecting Devices and

Passive Components - Basic Test and MeasurementProcedures - Part 3-40: Examinations andMeasurements - Extinction Ratio of a PolarizationMaintaining (pm) Fibre Pigtailed Connector

IEC 60086B/1041 (DRAFT) Fibre Optic Interconnecting Devices andPassive Components - Basic Test and MeasurementProcedures - Part 2-41: Tests - Screen Testing ofAttenuation of Single-Mode Tuned Non-Angled OpticalFibre Connectors

IEC 60086B/1056 (DRAFT) Fibre Optic Interconnecting Devices andPassive Components - Basic Test and MeasurementProcedures - Part 3-23: Examination andMeasurements - Fibre Position Relative to FerruleEndface


IEC 60086B/1091 (DRAFT) Fibre Optic Interconnecting Devices andPassive Components - Basic Test and MeasurementProcedures - Part 3-4: Examination andMeasurements - Attenuation

IEC 60086C/173 (DRAFT) Optical Fibre Amplifier Test Methods - Basic Specification - Part 1-1: Test Methods forGain Parameters - Optical Spectrum Analyzer

IEC 60086C/174 (DRAFT) Optical Fibre Amplifiers - BasicSpecification - Part 7-1: Test Methods for Out-Of-Band Insertion Losses - Filtered Optical PowerMeter

IEC 60086C/175 (DRAFT) Fibre Optic Communication Subsystems BasicTest Procedures - Part 2-5: Test Procedures forDigital Systems - Jitter Transfer FunctionMeasurement

IEC 60086C/176 (DRAFT) Optical Fibre Amplifier - BasicSpecification - Part 1-2: Test Methods for GainParameters - Electrical Spectrum Analyzer

IEC 60086C/177 (DRAFT) Optical Fibre Amplifiers - BasicSpecification - Part 1-3: Test Methods for GainParameters - Optical Power Meter

IEC 60086C/178 (DRAFT) Optical Fibre Amplifiers - BasicSpecification - Part 2-1: Test Methods for PowerParameters - Optical Spectrum Analyzer

IEC 60086C/179 (DRAFT) Optical Fibre Amplifiers - BasicSpecification - Part 2-3: Test Methods for OpticalPower Parameters - Optical Power Meter

IEC 60086C/180 (DRAFT) Optical Fibre Amplifiers - BasicSpecification - Part 6-1: Test Methods for PumpLeakage Parameters - Optical Demultiplexer

IEC 60086C/181 (DRAFT) Fibre Optic Communication Subsystem - BasicTest Procedures - Part 1-1: Test Procedures forGeneral Communication Subsystems - TransmitterOutput Optical Power Measurement for Single-ModeOptical Fibre Cable

IEC 60086C/182 (DRAFT) Optical Fibre Amplifiers - BasicSpecification - Part 2-2: Test Methods for OpticalPower Parameters - Electrical Spectrum Analyzer

IEC 60086C/183 (DRAFT) Fibre Optic Communication Subsystem - BasicProcedures - Part 2-4: Test Procedures for DigitalSystems - Bit-Rate Tolerance Measurement

IEC 60086C/193 (DRAFT) Optical Fibre Amplifiers - Part 1: GenericSpecification

IEC 60087/113 (DRAFT) Amendment No.1 to IEC 61161: UltrasonicPower Measurement in Liquids in the Frequency Range0,5 Mhz to 25 MHz

IEC 60087/114 (DRAFT) Ultrasonics - Surgical Systems - Measurement and Declaration of the Basic OutputCharacteristics

IEC 60092/60 (DRAFT) Audio, Video and Similar ElectronicApparatus - Safety Requirements

IEC 60094/75 (DRAFT) Electromechanical All-Or-Nothing Relays - Part 1: General Requirements

IEC 60096/111 (DRAFT) Safety of Power Transformers, Power SupplyUnits and Similar - Part 2-8: ParticularRequirements for Bell and Chime Transformers

IEC 60100B/110 (DRAFT) Spools for Broadcast Videotape Recorders (VTRS)

IEC 60100B/164 (DRAFT) Recording - Helical-Scan Digital VideoCassette Recording System Using 6,35 mm MagneticTape for Consumer Use (525-60, 625-50, 1125-60 and1250-50 Systems) - Part 4: Pack Header Table andthe Contents

IEC 60100B/221 (DRAFT) Video Cameras (PAL/SECAM/NTSC) - Methods ofMesurement - Part 4: Automatic Functions of Video


Cameras and Camera - Recorders IEC 60100C/182 (DRAFT) Consumer Audio/Video Equipment - Digital

Interface - Part 1: General IEC 60100C/183 (DRAFT) Consumer Audio/Video Equipment - Digital

Interface - Part 2: SD-DVCR Data Transmission IEC 60100C/184 (DRAFT) Consumer Audio/Video Equipment - Digital

Interface - Part 3: HD-DVCR Data Transmission IEC 60100C/185 (DRAFT) Consumer Audio/Video Equipment - Digital

Interface - Part 4: MPEG2-TS Data Transmission IEC 60100C/186 (DRAFT) Consumer Audio/Video Equipment - Digital

Interface - Part 5: SDL-DVCR Data Transmission IEC 60100C/187 (DRAFT) Video Systems (525/60) - Video and

Accompanied Data Using the Vertical BlankingInterval - Analogue Interface

IEC 60100C/188 (DRAFT) Sound Systems for Emergency Purposes (Revision of IEC 60849)

IEC 60100C/189 (DRAFT) Sound Systems Equipment - Part 16: TheObjective Rating of Speech Intelligibility bySpeech Transmission Index

IEC 60101/26 (DRAFT) Amendment No.1 IECQ CMC 446/INF Certification Management Committee (CMC) CMC

Officers and Permanent Delegates, 1996-02 IECQ CMC 447/INF Certification Management Committee (CMC) Membership

of CMC Working Groups, 1996-02 IECQ CMC SEC 199 Certification Management Committee (CMC) Membership

of CMC Working Groups IECQ CMC SEC 248 Certification Management Committee (CMC) Electronic

Components Quality Assessment Procedure for IECQAdoption of a CECC Specification

IECQ CMC SEC 274A Register of Participating Countries IECQ CMC SEC 324A Certification Management Committee (CMC) CMC

Membership of CMC Working Groups IECQ CMC SEC 325 Certification Management Committee (CMC) CMC

Officers and Permanent Delegates, 1992-03 IECQ CMC SEC 341 Certification Management Committee (CMC) CMC

Officers and Permanent Delegates IECQ CMC SEC 349 Certification Management Committee (CMC) Membership

of CMC Working Groups IECQ CMC SEC 385 Certification Management Committee (CMC) CMC

Officers and Permanent Delegates, 1994-08 IECQ CMC SEC 386 Certification Management Committee (CMC) Membership

of CMC Working Groups, 1994-08 IECQ GUIDE 102 (WITHDRAWN) Electronic Components: Specification

Structures for Quality Assessment (QualificationApproval and Capability Approval) (IEC GUIDE 102 ED3); (Amendment 1 - 1994)

IECQ GUIDE 102 Electronic Components - Specification Structuresfor Quality Assessment (Qualification Approval andCapability Approval) (IEC GUIDE 102 ED 4)

IECQ ICC 110/INF Inspectorate Co-Ordination Committee (ICC) ICCOfficers and Permanent Delegates, 1996-02

IECQ ICC 111/INF Inspectorate Co-Ordination Committee (ICC) Membership of Working Groups, 1996-02

IECQ ICC (INDIA)1 Inspectorate Co-Ordination Committee (ICC) Proposalby the Indian National Supervising Inspectorate fora Supplement to the Indian National Statement ofSurveillance Arrangements (NSSA)

IECQ ICC SEC 57 Inspectorate Co-Ordination Committee (ICC) Electronic Components Quality Assessment IECQ Listof Primary Stages of Manufacture

IECQ ICC SEC 67 Inspectorate Co-Ordination Committee (ICC) Membership of Working Groups, 1992-01

IECQ ICC SEC 68 Inspectorate Co-Ordination Committee (ICC) ICCOfficers and Permanent Delegates, 1992-05


IECQ ICC SEC 78 Inspectorate Co-Ordination Committee (ICC) ICCOfficers and Permanent Delegates

IECQ ICC SEC 79 Inspectorate Co-Ordination Committee (ICC) Membership of Working Groups

IECQ ICC SEC 97 Inspectorate Co-Ordination Committee (ICC) ICCOfficers and Permanent Delegates, 1994-08

IECQ ICC SEC 98 Inspectorate Co-Ordination Committee (ICC) Membership of Working Groups, 1994-08

IECQ IECEE 01 (WITHDRAWN) Basic Rules and Rules of Procedure ofthe System

IECQ IECEE 01 Basic Rules and Rules of Procedure of the IECSystem for Conformity Testing to Standards forSafety of Electrical Equipment (IECEE) ED 2

IECQ IECEE 02 (WITHDRAWN) Rules and Procedures of the Scheme ofthe IECEE for Recognition of Results of Testing toStandards for Safety of Electrical Equipment (CBScheme)

IECQ IECEE 02 Rules and Procedures of the Scheme of the IECEE forRecognition of Results of Testing to Standards forSafety of Electrical Equipment (CB Scheme) ED 3

IECQ IECEE 03 Rules and Procedures of the Scheme of the IECEE forMutual Recognition of Conformity AssessmentCertificates According to Standards for Safety ofElectrical Equipment (CB-FCS) ED 1

IECQ IECEE 04 Rules and Procedures of the Scheme of the IECEE forCertification to Standards for Electrical Equipmentfor Explosive Atmospheres (IECEx Scheme) ED 1

IECQ QC 001001 Basic Rules of the IEC Quality Assessment Systemfor Electronic Components (IECQ) Amendment 2-1994, Includes Amendment 1

IECQ QC 001002 Rules of Procedure of the IEC Quality AssessmentSystem for Electronic Components (IECQ) IncludesAmendment 1; Amendment 2-1992

IECQ QC 001002-2 Rules of Procedure of the IEC Quality AssessmentSystem for Electronic Components (IECQ) Part 2: Documentation, Including a New Clause onRegulations for Technology Approval Schedules (ED3)

IECQ QC 001002-3 Rules of Procedure of the IEC Quality AssessmentSystem for Electronic Components (IECQ) Part 3: Approval Procedures, Including a New Clause onTechnology Approval (ED 3)

IECQ QC 001003 Guidance Documents Documents - Guides Amendment2-1994

IECQ QC 001004 ISSUE 1 (WITHDRAWN) Specifications List Information Currentto 1992-12

IECQ QC 001004 ISSUE 1 (WITHDRAWN) Specifications List; InformationCurrent to 1993-12






IECQ QC 001005 (WITHDRAWN) Register of Firms, Products andServices Approved Under the IECQ System, IncludingISO 9000

IECQ QC 001005 ISSUE 1 (WITHDRAWN) Register of Firms, Products andServices Approved Under the IECQ System, IncludingISO 9000





IECQ QC 001005 ISSUE 2 (WITHDRAWN) Qualified Products List IECQ QC 001005 ISSUE 2 (WITHDRAWN) Register of Firms, Products and

Services Approved Under the IECQ System, IncludingISO 9000



IECQ QC 001006 Register of Participating Countries (En) IECQ QC 001004 ISSUE 1 Specifications List Information Current to 1997-06 IECQ QC 001005 ISSUE 1 (WITHDRAWN) Register of Firms, Products and

Services Approved Under the IECQ System, IncludingISO 9000

IECQ QC 001005 ISSUE 1 Register of Firms, Products and Services ApprovedUnder the IECQ System, Including ISO 9000

IECQ QC 001005 ISSUE 2 (WITHDRAWN) Register of Firms, Products andServices Approved under the IECQ System, IncludingISO 9000

IECQ QC 010000 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards Part 1: Generic Specification - General Requirements and Guide for thePreparation of Detail Specifications, with AssessedQuality Amendment 1-1992; IEC 603-1 ED 2

IECQ QC 010000/ IN0001 IS 1 Two Part Connectors for Printed Circuit Boardsfor Basic Grid of 2,54mm (0.1 Inch) with CommonMounting Euro Connectors Style R, R/2 & HE11 (Connectors Conforming to 500 Mating Cycles andHaving 1.27 Micron Gold Plating Finish over ContactArea)

IECQ QC 010000 XX0001 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards - Part 13: Detail Specification forTwo-Part Connectors of Assessed Quality, forPrinted Boards for Basic Grid of 2,54 mm (0,1 in), with Free Connectors for Non-Accessible InsulationDisplacement Terminations (ID) IEC 603-13 ED 1

IECQ QC 010000 XX0002 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards - Part 2: Detail Specification forTwo-Part Connectors with Assessed Quality, forPrinted Boards, for Basic Grid of 2,54 mm (0,1 in) with Common Mounting Features IEC 603-2 ED 3

IECQ QC 010000 XX0003 Connectors for Frequencies Below 3 MHz for Use withPrinted Boards - Part 7: Detail Specification forConnectors, 8-Way, Including Fixed and FreeConnectors with Common Mating Features, withAssessed Quality IEC 603-7 ED 2

IECQ QC 030000 Rectangular Connectors for Frequencies Below 3 MHzPart 1: Generic Specification - GeneralRequirements and Guide for the Preparation ofDetail Specifications for Connectors with AssessedQuality IEC 807-1 ED 2

IECQ QC 030000 XX0001 Rectangular Connectors for Frequencies Below 3 MHzPart 2: Detail Specification for a Range ofConnectors, with Assessed Quality, with Trapezoidal


Shaped Metal Shells and Round Contacts - FixedSolder Contact Types IEC 807-2 ED 2

IECQ QC 030000 XX0001 Rectangular Connectors for Frequencies Below 3 MHzPart 2: Detail Specification for a Range ofConnectors, with Assessed Quality, with TrapezoidalShaped Metal Shells and Round Contacts - FixedSolder Contact Types IEC 807-2 ED 2; Amendment 1 - 1996

IECQ QC 030000/ XX0002 Rectangular Connectors for Frequencies Below 3MHz; Part 7: Detail Specification for a Range ofConnectors with Polarized Guides or Jackscrews andSize 16 (13 A) Round Contacts - Removable CrimpContact Types with Closed Crimp Barrels, RearInsertion/Front Release, with Assessed Quality IEC807-7 ED 1

IECQ QC 160000 Electrical Relays Part 7: Test and MeasurementProcedures for Electromechanical All-or-NothingRelays IEC 255-7 ED 2

IECQ QC 160100 Electrical Relays Part 19: SectionalSpecification: Electromechanical All-or-NothingRelays of Assessed Quality IEC 255-19 ED 1

IECQ QC 160101 Electrical Relays Part 19: Blank DetailSpecification: Electromechanical All-or-NothingRelays of Assessed Quality Test Schedules 1, 2 and3 IEC 255-19-1 ED 1

IECQ QC 160101/IN 0001 ISSUE 1 Relays for Use in Electronic Equipment: Detail Specification: Electromechanical All-or-Nothing Relays Relays of Assessed Quality (En)

IECQ QC 160500 Electromechanical All-or-Nothing Relays - Part 50: Sectional Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality FirstEdition; IEC 61811-50 ED 1

IECQ QC 160501 Electromechanical All-or-Nothing Relays - Part 51: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - Non-Standardized Types and Construction FirstEdition; IEC 61811-51:1997

IECQ QC 160502 Electromechanical All-or-Nothing Relays - Part 52: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - TwoChange-Over Contacts, 20 mm x 10 mm Base FirstEdition; IEC 61811-52:1997

IECQ QC 160503 Electromechanical All-or-Nothing Relays - Part 53: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - TwoChange-Over Contacts, 14 mm x 9 mm Base FirstEdition; IEC 61811-53:1997

IECQ QC 160504 Electromechanical All-or-Nothing Relays - Part 54: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - TwoChange-Over Contacts, 15 mm x 7,5 mm Base FirstEdition; IEC 61811-54:1997

IECQ QC 200000 Process Assessment Schedules for Requirements underthe IEC Quality Assessment System for ElectronicComponents (IECQ) for Approval of SpecialistContractors' Processes and/or Products within theElectronic Components Industry ED 1

IECQ QC 200012 ISSUE 1 Process Assessment Schedule for Printed BoardDesign Facilities

IECQ QC 200012 ISSUE 2 Process Assessment Schedule for Printed BoardDesign Facilities CECC 200012: 1996; En

IECQ QC 210000 (WITHDRAWN) Connectors for Optical Fibres andCables Part 1: Generic Specification IEC 874-1 ED 2

IECQ QC 210000 Technology Approval Schedules; Requirements underthe IEC Quality Assessment System for Electronic


Components (IECQ) IECQ QC 210000 Technology Approval Schedules; Requirements under

the IEC Quality Assessment System for ElectronicComponents (IECQ) ED 1

IECQ QC 210100 (WITHDRAWN) Connectors for Optical Fibres andCables Part 2: Sectional Specification; Fibre OpticConnector Type F-SMA IEC 874-2 ED 1

IECQ QC 210101/ US 0001 Fiber Optics for Use in Electronic Equipment: Detail Specification: Fiber Optic Connectors TypeF - SMA Amendment 1-1990

IECQ QC 210200 (WITHDRAWN) Connectors for Optical Fibres andCables Part 6: Sectional Specification; Fibre OpticConnector Type BACS IEC 874-6 ED 1

IECQ QC 210300 (WITHDRAWN) Connectors for Optical Fibres andCables Part 3: Sectional Specification Fibre OpticConnector; Type CFO3 IEC 874-3 ED 1

IECQ QC 210500 (WITHDRAWN) Connectors for Optical Fibres andCables Part 4: Sectional Specification; Fibre OpticConnector Type CFO4 IEC 874-4 ED 1

IECQ QC 210800 (WITHDRAWN) Connectors for Optical Fibres andCables Part 9: Sectional Specification Fibre OpticConnector Type OF-2 IEC 874-9 ED 1

IECQ QC 211000 Integrated Circuits - Procedures for ManufacturingLine Approval and Quality Management IEC 1739 ED 1

IECQ QC 220000 Radio-Frequency Connectors - Part 1: GenericSpecification - General Requirements and MeasuringMethods ED 1; Amendment 1: 1996; Amendment 2: 1997; IEC 61169-1: 1992 ED 1

IECQ QC 220000 (WITHDRAWN) Radio-Frequency Connectors Part 1: Generic Specification - General Requirements andMeasuring Methods IEC 1169-1 ED 1; Amendment 1 - 1996

IECQ QC 220001 Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail SpecificationIEC 1169-1-1 ED 1

IECQ QC 221100 Radio-Frequency Connectors Part 15: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor4,13mm (0,163 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SMA) IEC169-15 ED 1; Amendment 1 -1996

IECQ QC 221100 Radio-Frequency Connectors Part 15: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor4.13 mm (0.163 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SMA) IEC169-15: 1979

IECQ QC 221200 Radio-Frequency Connectors Part 8: RF CoaxialConnectors with Inner Diameter of Outer Conductor6,5mm (0,256 in) with Bayonet Lock - CharacteristicImpedance 50 Ohms (Type BNC) IEC 169-8 ED 1; Amendment 1 -1996

IECQ QC 221200 Radio-Frequency Connectors Part 8: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor6.5 mm (0.256 in) with Bayonet Lock - Characteristic Impedance 50 Ohms (Type BNC) IEC169-8: 1978

IECQ QC 221200 Radio-frequency Connectors - RF Coaxial Connectorswith Inner Diameter of Outer Conductor 6,5 mm (0,256 in) with Bayonet Lock - CharacteristicImpedance 50 ohms (Type BNC) IEC 169-8: 1978: Amendment No.1 : 1997

IECQ QC 221300 Radio-Frequency Connectors Part 10: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor3mm (0,12 in) with Snap-on Coupling - Characteristic Impedance 50 Ohms (Type SMB) IEC


169-10 ED 1; Amendment 1 -1986; Amendment 2 -1996 IECQ QC 221300 Radio-Frequency Connectors Part 10: R.F. Coaxial

Connectors with Inner Diameter of Outer Conductor 3mm (0.12 in) with Snap-on Coupling - CharacteristicImpedance 50 Ohms (Type SMB) IEC 169-10: 1983

IECQ QC 221400 Radio-Frequency Connectors Part 9: RF CoaxialConnectors with Inner Diameter of Outer Conductor3mm (0,12 in) with Screw Coupling - CharacteristicImpedance 50 Ohms (Type SMC) IEC 169-9 ED 1; Amendment 1-1996

IECQ QC 221400 Radio-Frequency Connectors Part 9: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor 3mm (0.12 in) with Screw Coupling - CharacteristicImpedance 50 Ohms (Type SMC) IEC 169-9: 1978

IECQ QC 222000 Radio-Frequency Connectors Part 17: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor6,5 mm (0,256 in) with Screw Coupling - Characteristic Impedance 50 ohms (Type TNC) IEC169-17 ED 1; Amendment 1-1993

IECQ QC 222000 Radio-Frequency Connectors Part 17: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor6.5 mm (0.256 in) with Screw Coupling - Characteristic Impedance 50 ohms (Type TNC) IEC169-17: 1980

IECQ QC 222100 Radio-Frequency Connectors Part 16: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor7mm (0,276 in) with Screw Coupling - CharacteristicImpedance 50 ohms (75 Ohms) (Type N) IEC 169-16 ED1; Amendment 1-1996

IECQ QC 222100 Radio-Frequency Connectors Part 16: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor 7mm (0.276 in) with Screw Coupling - CharacteristicImpedance 50 Ohms (75 Ohms) (Type N) IEC 169-16: 1982

IECQ QC 222400 Radio-Frequency Connectors Part 13: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor5,6mm (0,22 in) - Characteristic Impedance 75 Ohms (Type 1,6/5,6) - Characteristic Impedance 50 Ohms (Type 1,8/5,6) with Similar Mating Dimensions IEC169-13 ED 1; Amendment 1-1996

IECQ QC 222400 Radio-Frequency Connectors Part 13: R.F. CoaxialConnectors with Inner Diameter of Outer Conductor5.6 mm (0.22 in) - Characteristic Impedance 75Ohms (Type 1.6/5.6); Characteristic Impedance 50Ohms (Type 1.8/5.6) with Similar Mating DimensionsIEC 169-13: 1976

IECQ QC 222800 Radio-Frequency Connectors Part 33: SectionalSpecification for Series BMA R.F. Connectors IEC1169-33; ED 1

IECQ QC 223600 Radio-Frequency Connectors Part 36: Microminiaturer.f. Coaxial Connectors with Snap-On Coupling - Characteristic Impedance 50 Ohms (Type MCX) IEC1169-36; ED 1

IECQ QC 230000 Printed Boards - Part 1: Generic Specification IEC2326-1; ED 1

IECQ QC 230401 Printed Boards - Part 4: Rigid Multilayer PrintedBoards with Interlayer Connections - SectionalSpecification - Section 1: Capability DetailSpecification - Performance Levels A, B and C IEC2326-4-1; ED 1

IECQ QC 230500 Printed Boards - Part 4: Rigid Multilayer PrintedBoards with Interlayer Connections - SectionalSpecification IEC 2326-4; ED 1

IECQ QC 250000 Inductor and Transformer Cores forTelecommunications Part 1: Generic Specifications


IEC 723-1 ED 1 IECQ QC 250100 Inductor and Transformer Cores for

Telecommunications Part 2: SectionalSpecification: Magnetic Oxide Cores for InductorApplications Amendment 1-1989; IEC 723-2 ED 1

IECQ QC 250101 Inductor and Transformer Cores forTelecommunications Part 2: Blank DetailSpecification: Magnetic Oxide Cores for InductorApplications; Assessment Level A IEC 723-2-1 ED 1

IECQ QC 250101/JP 0001 Detail Specification for Electronic Components; Ferrite Cores; Assessment Level: A


IECQ QC 250101/JP 0003 Detail Specification for Electronic Components: Ferrite Cores; Assessment Level: A


IECQ QC 250200 Inductor and Transformer Cores forTelecommunications Part 3: SectionalSpecification: Magnetic Oxide Cores for Broad-BandTransformers IEC 723-3 ED 1

IECQ QC 250201/ QC 250202 Inductor and Transformer Cores forTelecommunications Part 3: Blank DetailSpecification: Magnetic Oxide Cores for Broad-BandTransformers; Assessment Levels A and B

IECQ QC 250300 Inductor and Transformer Cores forTelecommunications Part 4: SectionalSpecification: Magnetic Oxide Cores forTransformers and Chokes for Power Applications IEC723-4 ED 1

IECQ QC 250301 Inductor and Transformer Cores forTelecommunications Part 4: Blank DetailSpecification: Magnetic Oxide Cores forTransformers and Chokes for Power Applications; Assessment Level A IEC 723-4-1 ED 1

IECQ QC 250301/ IN 0001 Inductor and Transformers Cores forTelecommunication; Magnetic Oxide Cores for FlybackTransformers. Type: UU 5255

IECQ QC 250301/ IN 0002 Inductor and Transformers Cores forTelecommunication; Magnetic Oxide Cores for FlybackTransformers Type: UU 5756

IECQ QC 250301/ IN 0003 Inductor and Transformers Cores forTelecommunication; Magnetic Oxide Cores forTransformers for Power Applications Type: EE 4215

IECQ QC 250301/ IN 0004 Inductor and Transformers Cores forTelecommunication; Magnetic Oxide Cores forTransformers for Power Applications. Type: EE 3007

IECQ QC 250301/ IN 0005 Inductor and Transformers Cores forTelecommunication; Magnetic Oxide Cores forTransformers for Power Applications. Type: EE 3213

IECQ QC 250301/ IN 0006 Inductor and Transformers Cores forTelecommunication; Magnetic Oxide Cores forTransformers. Type: UU 3569

IECQ QC 250301/ IN 0009 Inductor and Transformers Cores forTelecommunication; Magnetic Oxide Cores forTransformers for Power Applications. Type: EI 4012

IECQ QC 250400 Inductor and Transformer Cores forTelecommunications Part 5: SectionalSpecification: Adjusters Used with Magnetic OxideCores for Use in Adjustable Inductors andTransformers IEC 723-5 ED 1

IECQ QC 250401 Inductor and Transformer Cores forTelecommunications Part 5: SectionalSpecification: Adjusters Used with Magnetic Oxide


Cores for Use in Adjustable Inductors andTransformers Section 1: Blank Detail Spec - Assessment Level A IEC 723-5-1 ED 1

IECQ QC 260000 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 1: GenericSpecification IEC 1248-1 ED 1

IECQ QC 260100 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 2: SectionalSpecification for Signal Transformers on the Basisof the Capability Approval Procedure IEC 1248-2 ED1

IECQ QC 260200 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 3: SectionalSpecification for Power Transformers on the Basisof the Capability Approval Procedure IEC 1248-3 ED1

IECQ QC 260300 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 4: SectionalSpecification for Power Transformers for SwitchedMode Power Supplies (SMPS) on the Basis of theCapability Approval Procedure IEC 1248-4 ED 1

IECQ QC 260400 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 5: SectionalSpecification for Pulse Transformers on the Basisof the Capability Approval Procedure IEC 1248-5 ED1

IECQ QC 260500 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 6: SectionalSpecification for Inductors on the Basis of theCapability Approval Procedure IEC 1248-6 ED 1

IECQ QC 260600 Transformers and Inductors for Use in Electronicand Telecommunication Equipment - Part 7: SectionalSpecification for High-Frequency Inductors andIntermediate Frequency Transformers on the Basis ofthe Capability Approval Procedure ED 1; IEC61248-7: 1997 ED 1

IECQ QC 300000 Fixed Capacitors for Use in Electronic EquipmentPart 1: Generic Specification Amendment 2-1987, Incorporating Amendment 1; Amendment 3-1989; Amendment 4-1992; IEC 384-1 ED 2

IECQ QC 300100 Fixed Capacitors for Use in Electronic EquipmentPart 11: Sectional Specification: FixedPolyethylene- Terephthalate Film Dielectric MetalFoil d.c. Capacitors IEC 384-11 ED 2

IECQ QC 300101 Fixed Capacitors for Use in Electronic EquipmentPart 11: Blank Detail Specification: FixedPolyethylene- Terephthalate Film Dielectric MetalFoil d.c. Capacitors Assessment Level E IEC384-11-1 ED 1

IECQ QC 300101/ CN 0001 Detail Specification for Electronic ComponentsFixed Polyethylene-Terephthalate Film DielectricMetal Foil d.c. Capacitors, Type CL12 AssessmentLevel E

IECQ QC 300101/ CN 0002 Detail Specification for Electronic ComponentsFixed Polyethylene-Terephthalate Film DielectricMetal Foil d.c. Capacitors, Type CL 11 AssessmentLevel E

IECQ QC 300200 Fixed Capacitors for Use in Electronic EquipmentPart 15: Sectional Specification: Fixed TantalumCapacitors with Non-Solid or Solid ElectrolyteAmendment 1-1987; Amendment 2-1992; IEC 384-15 ED 1

IECQ QC 300201 Fixed Capacitors for Use in Electronic EquipmentPart 15: Blank Detail Specification: Fixed TantalumCapacitors with Solid Electrolyte and Porous AnodeAssessment Level E Amendment 1-1992; IEC 384-15-3


ED 1 IECQ QC 300201/ CN 0001 Detail Specification for Electronic Components

Fixed Tantalum Electrolyte Capacitors with SolidElectrolyte Type CA42 Assessment Level E

IECQ QC 300201/ CN 0002 Detail Specification for Electronic ComponentsFixed Tantalum Electrolytic Capacitors with SolidElectrolyte Type CA Assessment Level E

IECQ QC 300201/ CN 0003 Fixed Tantalum Electrolytic Capacitors with SolidElectrolyte Type CA - 1 Assessment Level E

IECQ QC 300201/GB 0001 ISSUE 1 Fixed Tantalum Capacitors with SolidElectrolyte and Porous Anode

IECQ QC 300201/GB 0002 ISSUE 1 Fixed Tantalum Capacitors Solid ElectrolytePorous Anode Polar Cylindrical Metal Case HermeticSeal Axial Terminations

IECQ QC 300201/ JP 0002 Detail Specification for Electronic ComponentsFixed Tantalum Capacitors with Solid Electrolyte

IECQ QC 300201/ SU 0001 (WITHDRAWN) Detail Specification for ElectronicComponents Fixed Tantalum Capacitors with SolidElectrolyte and Porous Anode Type K53-34 Amendment1-1992

IECQ QC 300201/ US 0001 Capacitors for Use in Electronic Equipment FixedTantalum Capacitors with Solid Electrolyte andPorous Anode with Wire Lead Terminals HermeticallySealed, Axial Lead, Polarized, Insulated

IECQ QC 300201/ US 0002 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Tantalum Capacitorswith Solid Electrolyte and Porous Anode with WireLead Terminals Amendment 1-1986

IECQ QC 300201/ US 0003 Capacitors for Use in Electronic Equipment DetailSpecification: Fixed Tantalum Capacitors with SolidElectrolyte and Porous Anode with Radial Leads

IECQ QC 300201/ US 0004 Capacitors for Use in Electronic Equipment: FixedTantalum Capacitors with Solid Electrolyte andPorous Anode with Wire Lead Terminals Polar, AxialLeaded, Molded, Non-Hermetically Sealed Amendment1-1986

IECQ QC 300201/ US 0005 Fixed Tantalum Capacitors with Solid Electrolyteand Porous Anode with Wire Lead Terminals; Rectangular, Subminiature, Non-HermeticallySealed, Plastic Encapsulated, Polarized, Insulated, Axial Lead Amendment 1-1986

IECQ QC 300201/ US 0006 Fixed Tantalum Capacitors with Solid Electrolyteand Porous Anode with Wire Lead TerminalsRectangular, Subminiature, Non-HermeticallySealed, Plastic Encapsulated, Polarized, Insulated, Radial Lead Amendment 1-1986

IECQ QC 300202 Fixed Capacitors for Use in Electronic EquipmentPart 15: Blank Detail Specification: Fixed TantalumCapacitors with Non-Solid Electrolyte and PorousAnode Assessment Level E IEC 384-15-2 ED 1

IECQ QC 300202/GB 0001 ISSUE 1 Fixed Tantalum Capacitors with Non-SolidElectrolyte and Porous Anodes

IECQ QC 300202/US 0001 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitorswith Non-Solid Electrolyte and Porous Anode

IECQ QC 300202/US 0002 Detail Specification for Use in ElectronicEquipment; Fixed Tantalum Capacitors with Non-SolidElectrolyte and Porous Anode

IECQ QC 300202/US 0003 Detail Specification for Use in ElectronicEquipment: Fixed Tantalum Capacitors with Non-SolidElectrolyte and Porous Anode

IECQ QC 300202/US 0004 Detail Specification for Use in ElectronicEquipment; Fixed Tantalum Capacitors with Non-SolidElectrolyte and Porous Anode


IECQ QC 300202/US 0005 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitorswith Non-Solid Electrolyte and Porous Anode; SilverCase, Axial Lead, Elastomeric Seal, Polarized, Nickel Positive, Copper Negative Leads Insulated

IECQ QC 300203 Fixed Capacitors for Use in Electronic Equipment: Part 15: Blank Detail Specification: Fixed TantalumCapacitors with Non-Solid Electrolyte and FoilElectrode Assessment Level E IEC 384-15-1 ED 1

IECQ QC 300203/US 0001 Detail Specification for Use in ElectronicEquipment: Fixed Tantalum Capacitors with Non-SolidElectrolyte and Foil Electrode




IECQ QC 300300 Fixed Capacitors for Use in Electronic EquipmentPart 4: Sectional Specification: AluminiumElectrolytic Capacitors with Solid and Non-SolidElectrolyte Amendment 1-1992; Amendment 2-1996; IEC384-4 ED 2

IECQ QC 300301 Fixed Capacitors for Use in Electronic EquipmentPart 4: Blank Detail Specification: AluminiumElectrolytic Capacitors with Non-Solid ElectrolyteAssessment Level E Amendment 1-1992; Amendment2-1996; IEC 384-4-1 ED 1

IECQ QC 300301/ CN 0001 Electronic Components: Fixed Aluminium ElectrolyticCapacitors, Type CD11; Assessment Level E



IECQ QC 300301/ CN 0004 Electronic Components Fixed Aluminium ElectrolyticCapacitors, Type CD291, CD292 and CD293 AssessmentLevel E

IECQ QC 300301/ CN 0005 Electronic Components Fixed Aluminium ElectrolyticCapacitors, Type CD288; Assessment Level E

IECQ QC 300301/ GB 0001 Aluminium Electrolytic Capacitors with Non-SolidElectrolyte, Cylindrical, Polar, Insulated Case, Screw Terminations, Not for Printed BoardApplications

IECQ QC 300301/ GB 0002 Aluminium Electrolytic Capacitors with Non-SolidElectrolyte, Cylindrical, Polar Insulated Case, Rigid Pin and Tag Solder Terminations

IECQ QC 300301/ GB 0003 Aluminium Electrolytic Capacitors with Non-SolidElectrolyte, Cylindrical, Insulated Case, RigidTerminations, PC Mounting

IECQ QC 300301/ JP 0001 Electronic Components: Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte; (tubular, Polar, Metallic Case, Insulated, RadialTerminations)

IECQ QC 300301/ JP 0002 Electronic Components: Fixed Aluminium ElectrolyticCapacitors with Solid Electrolyte AssessmentLevel(s) E

IECQ QC 300301/ JP 0003 Electronic Components: Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte AssessmentLevel(s) E

IECQ QC 300301/ JP 0004 Electronic Components Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte Assessment


Level(s) E IECQ QC 300301/ JP 0005 Electronic Components Aluminium Electrolytic

Capacitors with Non-Solid Electrolyte AssessmentLevel(s) E

IECQ QC 300301/ JP 0006 Electronic Components Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte AssessmentLevel(s) E

IECQ QC 300301/ JP 0007 Electronic Components: Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte; AssessmentLevel E (Tubular, Polar, Metallic Case, Insulated, Radial Terminations)

IECQ QC 300301/ KR 0001 Electronic Components Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte






IECQ QC 300301/ SE 0001 Aluminium Electrolytic Capacitors with Non-SolidElectrolyte

IECQ QC 300301/ SU 0001 (WITHDRAWN) Electronic Components Fixed AluminiumElectrolytic Capacitors with Non-Solid ElectrolyteType K50-53

IECQ QC 300301/ US 0001 Capacitors for Use in Electronic Equipment: DetailSpecification: Fixed Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte

IECQ QC 300301/ US 0002 Capacitors for Use in Electronic Equipment: DetailSpecification: Fixed Aluminium ElectrolyticCapacitors with Non-Solid Electrolyte - LY Type

IECQ QC 300301/US 0003 ISSUE 1 Capacitors for Use in ElectrotechnicalEquipment Detail Specification: Fixed AluminiumElectrolytic Capacitors with Non-Solid ElectrolyteSK Type

IECQ QC 300302 Fixed Capacitors for Use in Electronic EquipmentPart 4: Blank Detail Specification: AluminiumElectrolytic Capacitors with Solid ElectrolyteAssessment Level E Amendment 1-1992; IEC 384-4-2 ED1

IECQ QC 300400 Fixed Capacitors for Use in Electronic EquipmentPart 2: Blank Detail Specification: FixedMetallized Polyethylene-Terephthalate FilmDielectric d.c. Capacitors Assessment Level EAmendment 1-1987; Amendment 2-1992; IEC384-2 ED 2

IECQ QC 300401 Fixed Capacitors for Use in Electronic EquipmentPart 2: Blank Detail Specification: FixedMetallized Polyethylene-Terephthalate FilmDielectric d.c. Capacitors Assessment Level EAmendment 1-1987; IEC 384-2-1 ED 1

IECQ QC 300401/ CN 0001 Detail Specification for Electronic ComponentsFixed Metallized Polyethylene-Terephthalate FilmDielectric d.c. Capacitors, Type CL21 AssessmentLevel E

IECQ QC 300401/ CS 0001 Fixed Metallized Polyethylene-Terephthalate FilmDielectric d.c. Capacitors

IECQ QC 300401/ HU 0001 Metallized Polyethylene-Terephthalate Capacitors IECQ QC 300401/ IN 0001 Detail Specification: Fixed Metallized

Polyethylene-Terephthalate Film DielectricCapacitors for d.c. Application Type MKT 1.60

IECQ QC 300401/ IN 0002 Detail Specification: Fixed Metallized


Polyethylene-Terephthalate Film DielectricCapacitors for d.c. Application Type MKT 1.67

IECQ QC 300401/ KR 0001 Detail Specification: Fixed Metallized PolyethyleneTerephthalate Film Dielectric d.c. CapacitorsAssessment Level: E

IECQ QC 300401/ RU 0002 Detail Specification for Use in ElectronicEquipment: Fixed Metallized Polyethylene-Terephthalate Film Dielectric d.c. Capacitors TypeK73-11

IECQ QC 300401/ RU 0003 Electronic Equipment: Fixed MetallizedPolyethylene-Terephthalate Film Dielectric d.c. Capacitors Type K73-17

IECQ QC 300401/ZA 0001 IS 1.1 Detail Specification: Boxed Capacitors forUse in Electronic Equipment Fixed MetallizedPolyethylene-Terephthalate Film Dielectric d.c. Capacitors Assessment Level E

IECQ QC 300401/ZA 0002 IS 1.1 Detail Specification: Epoxy Dipped Capacitorsfor Use in Electronic Equipment Fixed MetallizedPolyethylene-Terephthalate Film Dielectric d.c. Capacitors Assessment Level E

IECQ QC 300401/ZA 0003 IS 1.1 Detail Specification: Miniature Epoxy DippedCapacitors for Use in Electronic Equipment FixedMetallized Polyethylene-Terephthalate FilmDielectric d.c. Capacitors Assessment Level E

IECQ QC 300500 Fixed Capacitors for Use in Electronic EquipmentPart 6: Sectional Specification: Fixed MetallizedPolycarbonate Film Dielectric d.c. CapacitorsAmendment 1-1992; IEC 384-6 ED 2

IECQ QC 300501 Fixed Capacitors for Use in Electronic EquipmentPart 6: Blank Detail Specification: FixedMetallized Polycarbonate Film Dielectric d.c. Capacitors Assessment Level E IEC 384-6-1 ED 1

IECQ QC 300600 Fixed Capacitors for Use in Electronic EquipmentPart 8: Sectional Specification: Fixed Capacitorsof Ceramic Dielectric, Class 1 Amendment 1-1993; IEC 384-8 ED 2

IECQ QC 300601 Fixed Capacitors for Use in Electronic EquipmentPart 8: Blank Detail Specification: FixedCapacitors of Ceramic Dielectric, Class 1Assessment Level E Amendment 1-1993; IEC 384-8-1 ED1

IECQ QC 300601/ CN 0001 Detail Specification for Electronic ComponentsFixed Capacitors of Ceramic Dielectric, Class 1Type CC1 Assessment Level E

IECQ QC 300601/JP 0001 Fixed Capacitors for Use in Equipment Part 8: Detail Specification: Fixed Capacitors of CeramicDielectric, Class 1 Assessment Level E

IECQ QC 300601/JP 0002 Fixed Capacitors for Use in Electronic EquipmentPart 8: Detail Specification: Fixed Capacitors ofCeramic Dielectric, Class 1 Assessment Level E

IECQ QC 300601/JP 0003 Fixed Capacitors for Use in Electronic EquipmentDetail Specification: Fixed Ceramic DielectricCapacitors, Class 1 Assessment Level E

IECQ QC 300601/JP 0004 Fixed Capacitors for Use in Electronic EquipmentPart 8: Detail Specification: Fixed Capacitors ofCeramic Dielectric, Class 1 Assessment Level E

IECQ QC 300601/ SG 0001 Fixed Capacitors for Use in Electronic EquipmentPart 8: Detail Specification: Fixed Capacitors ofCeramic Dielectric, Class 1 Assessment Level E IEC384-8-1 ED 1

IECQ QC 300601/US 0001 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Capacitors, MultilayerCeramic Dielectric, Class 1B Conformal InsulatedCoating, Axial Leads


IECQ QC 300601/US 0002 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Capacitors, MultilayerCeramic Dielectric, Class 1B Conformal InsulatedCoating, Radial Leads

IECQ QC 300601/US 0003 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Capacitors of CeramicDielectric, Class 1, Assessment Level E

IECQ QC 300601/US 0004 ISSUE 1 Specifications for Use in ElectrotechnicalEquipment: Detail Specification: Fixed Capacitorsof Ceramic Dielectric Class 1B Molded CaseMultilayer Ceramic - Axial Leads

IECQ QC 300601/US 0005 ISSUE 1 Specifications for Use in ElectrotechnicalEquipment: Detail Specification: Fixed Capacitorsof Ceramic Dielectric Class 1B Molded CaseMultilayer Ceramic - Radial Leads

IECQ QC 300700 Fixed Capacitors for Use in Electronic EquipmentPart 9: Sectional Specification: Fixed Capacitorsof Ceramic Dielectric, Class 2 IEC 384-9 ED 2

IECQ QC 300700 Fixed Capacitors for Use in Electronic Equipment. Sectional Specification for Fixed Capacitors ofCeramic Dielectric, Class 2 IEC 384-9: 1988

IECQ QC 300701 Fixed Capacitors for Use in Electronic EquipmentPart 9: Blank Detail Specification: FixedCapacitors of Ceramic Dielectric, Class 2Assessment Level E IEC 384-9-1 ED 1

IECQ QC 300701/CN 0001 Detail Specification for Electronic ComponentsFixed Capacitors of Ceramic Dielectric, Class 2Type CT1 Assessment Level E IEC 384-9-1 ED 1

IECQ QC 300701/ JP 0001 Fixed Capacitors for Use in Equipment Part 9: Detail Specification: Fixed Capacitors of CeramicDielectric, Class 2 Assessment Level E

IECQ QC 300701/ JP 0002 Fixed Capacitors for Use in Electronic EquipmentPart 9: Detail Specification: Fixed Capacitors ofCeramic Dielectric, Class 2 Assessment Level E

IECQ QC 300701/ JP 0003 Fixed Capacitors for Use in Electronic EquipmentDetail Specification: Fixed Ceramic DielectricCapacitors, Class 2 Assessment Level E

IECQ QC 300701/ JP 0004 Fixed Capacitors for Use in Electronic EquipmentPart 9: Detail Specification: Fixed Capacitors ofCeramic Dielectric, Class 2 Assessment Level E

IECQ QC 300701/ KR 0001 Fixed Capacitors for Use in Electronic EquipmentPart 9: Detail Specification: Fixed Capacitors ofCeramic Dielectric, Class 2 Assessment Level E

IECQ QC 300701/ SG 0001 Fixed Capacitors for Use in Electronic EquipmentPart 9: Detail Specification: Fixed Capacitors ofCeramic Dielectric, Class 2 Assessment Level E

IECQ QC 300701/US 0001 ISSUE 2 Fixed Capacitors for Use in ElectronicEquipment: Detail Specification: Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2E6 ConformalInsulated Coating, Axial Leads

IECQ QC 300701/US 0002 ISSUE 2 Fixed Capacitors for Use in ElectrotechnicalEquipment: Detail Specification: Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2R1 ConformalInsulated Coating, Radial Leads

IECQ QC 300701/US 0003 ISSUE 2 Fixed Capacitors for Use in ElectrotechnicalEquipment: Detail Specification: Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2R1 ConformalInsulated Coating, Axial Leads

IECQ QC 300701/US 0004 ISSUE 2 Fixed Capacitors for Use in ElectrotechnicalEquipment: Detail Specification: Fixed Capacitors, Multilayer Ceramic Dielectric, Class 2E6 ConformalInsulated Coating, Radial Leads

IECQ QC 300701/ US 0005 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Capacitors of Ceramic


Dielectric, Class 2, Assessment Level E IECQ QC 300701/US 0006 ISSUE 1 Specifications for Use in Electrotechnical

Equipment: Detail Specification: Fixed Capacitorsof Ceramic Dielectric Class 2 X 1 Molded CaseMultilayer Ceramic - Axial Leads

IECQ QC 300701/US 0007 ISSUE 1 Specifications for Use in ElectrotechnicalEquipment: Detail Specification: Fixed Capacitorsof Ceramic Dielectric Class 2 X 1 Molded CaseMultilayer Ceramic - Radial Leads

IECQ QC 300800 Fixed Capacitors for Use in Electronic EquipmentPart 3: Sectional Specification: Fixed TantalumChip Capacitors IEC 384-3 ED 2

IECQ QC 300801 Fixed Capacitors for Use in Electronic EquipmentPart 3: Blank Detail Specification: Fixed TantalumChip Capacitors Assessment Level E Corrigendum1989; IEC 384-3-1 ED 1

IECQ QC 300801/ JP 0001 Detail Specification for Electronic ComponentsFixed Tantalum Chip Capacitors with SolidElectrolyte

IECQ QC 300801/ JP 0002 Detail Specification for Electronic ComponentsFixed Tantalum Chip Capacitors with SolidElectrolyte Assessment Level(s) E

IECQ QC 300801/ US 0001 Fixed Capacitors for Use in Electronic Equipment: Detail Specification. Fixed Tantalum Chip CapacitorStyle 1 Protected - Standard Capacitance RangeAmendment 1-1986

IECQ QC 300801/ US 0002 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Chip CapacitorStyle 1 Protected - Extended Capacitance Range

IECQ QC 300900 Fixed Capacitors for Use in Electronic Equipment: Part 7: Sectional Specification: Fixed PolystyreneFilm Dielectric Metal Foil d.c. Capacitors IEC384-7 ED 2

IECQ QC 300901 Fixed Capacitors for Use in Electronic EquipmentPart 7: Blank Detail Specification for FixedPolystyrene Film Dielectric Metal Foil d.c. Capacitors Assessment Level E IEC 384-7-1 ED 1

IECQ QC 301000 Fixed Capacitors for Use in Electronic Equipment: Part 5: Sectional Specification: Fixed MicaDielectric d.c. Capacitors with a Rated Voltage NotExceeding 3 000 V - Selection of Methods of Testand General Requirements IEC 384-5 ED 2

IECQ QC 301001 Fixed Capacitors for Use in Electronic Equipment: Part 5: Blank Detail Specification: Fixed MicaDielectric d.c. Capacitors with a Rated Voltage NotExceeding 3 000 V - Assessment Level E IEC 384-5-1ED 1

IECQ QC 301200 Fixed Capacitors for Use in Electronic EquipmentPart 16: Sectional Specification: Fixed MetallizedPolypropylene Film Dielectric d.c. CapacitorsAmendment 1-1987; Amendment 2-1992; IEC 384-16 ED 1

IECQ QC 301201 Fixed Capacitors for Use in Electronic EquipmentPart 16: Blank Detail Specification: FixedMetallized Polypropylene Film Dielectric d.c. Capacitors Assessment Level E Amendment 1-1987; IEC384-16-1 ED 1

IECQ QC 301201/ CN 0001 Fixed Metallized Polypropylene Film Dielectricd.c. Capacitors Type CBB23 Assessment Level E

IECQ QC 301201/ CN 0002 Fixed Metallized Polypropylene Film Dielectricd.c. Capacitors Type CBB24 Assessment Level E

IECQ QC 301201/ KR 0001 Detail Specification for Electronic ComponentsFixed Metallized Polypropylene Film Dielectricd.c. Capacitors Assessment Level E

IECQ QC 301300 Fixed Capacitors for Use in Electronic Equipment


Part 17: Sectional Specification: Fixed MetallizedPolypropylene Film Dielectric a.c. and PulseCapacitors IEC 384-17 ED 1

IECQ QC 301301 Fixed Capacitors for Use in Electronic EquipmentPart 17: Blank Detail Specification: FixedMetallized Polypropylene Film Dielectric a.c. andPulse Capacitors Assessment Level E IEC 384-17-1 ED1

IECQ QC 301700 Fixed Capacitors for Use in Electronic EquipmentPart 12: Sectional Specification: FixedPolycarbonate Film Dielectric Metal Foil d.c. Capacitors IEC 384-12 ED 2

IECQ QC 301701 Fixed Capacitors for Use in Electronic EquipmentPart 12: Blank Detail Specification: FixedPolycarbonate Film Dielectric Metal Foil d.c. Capacitors Assessment Level E IEC 384-12-1 ED 1

IECQ QC 301800 Fixed Capacitors for Use in Electronic EquipmentPart 13: Sectional Specification: FixedPolypropylene Film Dielectric Metal Foil d.c. Capacitors IEC 384-13 ED 2

IECQ QC 301801 Fixed Capacitors for Use in Electronic EquipmentPart 13: Blank Detail Specification: FixedPolypropylene Film Dielectric Metal Foil d.c. Capacitors Assessment Level E IEC 384-13-1 ED 1

IECQ QC 301801/ CN 0001 Fixed Polypropylene Film Dielectric Metal Foild.c. Capacitors Type CBB13 Assessment E

IECQ QC 301801/ CN 0002 Fixed Polypropylene Film Dielectric Metal Foild.c. Capacitors Type CBB 111 Assessment Level E

IECQ QC 301900 Fixed Capacitors for Use in Electronic EquipmentPart 10: Sectional Specification: Fixed MultilayerCeramic Chip Capacitors Amendment 1-1993; IEC384-10 ED 2

IECQ QC 301901 Fixed Capacitors for Use in Electronic EquipmentPart 10: Blank Detail Specification: FixedMultilayer Ceramic Chip Capacitors Assessment LevelE Amendment 1-1993; IEC 384-10-1 ED 1

IECQ QC 301901/ JP 0001 Detail Specification for Electronic ComponentsFixed Multilayer Ceramic Chip Capacitors AssessmentLevel E



IECQ QC 301901/ JP 0004 Fixed Multilayer Ceramic Chip Capacitors AssessmentLevel E

IECQ QC 301901/ JP 0005 Electronic Components Fixed Multilayer Ceramic ChipCapacitors Assessment Level E

IECQ QC 301901/ JP 0006 Electronic Components Fixed Multilayer Ceramic ChipCapacitors Assessment Level E

IECQ QC 301901/ SG 000 Detail Specification for Electronic ComponentsFixed Multilayer Ceramic Chip Capacitors AssessmentLevel E

IECQ QC 301901/US 0001 ISSUE 1 Capacitors for Use in ElectrotechnicalEquipment Detail Specification: Fixed MultilayerCeramic Chip Capacitors Subclass 2R1

IECQ QC 301901/US 0002 ISSUE 1 Capacitors for Use in ElectrotechnicalEquipment Detail Specification: Fixed MultilayerCeramic Chip Capacitors Subclass 1B

IECQ QC 301901/US 0003 ISSUE 1 Capacitors for Use in ElectrotechnicalEquipment: Detail Specification: Fixed MultilayerCeramic Chip Capacitors for Mounting on Rigid andNon-Rigid Substrates Subclass 2R1 and 2X1 Rated


Voltages: 50 Volts & 100 Volts IECQ QC 301901/US 0004 ISSUE 1 Capacitors for Use in Electrotechnical

Equipment: Detail Specification: Fixed MultilayerCeramic Chip Capacitors for Mounting on Rigid andNon-Rigid Substrates Subclass 1B Rated Voltages: 50Volts & 100 Volts

IECQ QC 302000 Fixed Capacitors for Use in Electronic Equipment - Part 20: Sectional Specification: FixedMetallized Polyphenylene Sulfide Film DielectricChip d.c. Capacitors IEC 384-20 ED 1

IECQ QC 302001 Fixed Capacitors for Use in Electronic Equipment - Part 20: Blank Detail Specification: FixedMetallized Polyphenylene Sulfide Film DielectricChip d.c. Capacitors Assessment Level EZ IEC384-20-1 ED 1

IECQ QC 302200 Fixed Capacitors for Use in Electronic EquipmentPart 19: Sectional Specification: Fixed MetallizedPolyethylene-Terephthalate Film Dielectric Chipd.c. Capacitors IEC 384-19 ED 1

IECQ QC 302201 Fixed Capacitors for Use in Electronic EquipmentPart 19: Blank Detail Specification: FixedMetallized Polyethylene- Terephthalate FilmDielectric Chip d.c. Capacitors Assessment Level EIEC 384-19-1 ED 1

IECQ QC 302300 Fixed Capacitors for Use in Electronic EquipmentPart 18: Sectional Specification: Fixed AluminiumElectrolytic Chip Capacitors with Solid and Non-Solid Electrolyte IEC 384-18 ED 1

IECQ QC 302301 Fixed Capacitors for Use in Electronic EquipmentPart 18: Blank Detail Specification: FixedAluminium Electrolytic Chip Capacitors with SolidElectrolyte Assessment Level E IEC 384-18-1 ED 1

IECQ QC 302302 Fixed Capacitors for Use in Electronic EquipmentPart 18: Blank Detail Specification: FixedAluminium Electrolytic Chip Capacitors with Non-Solid Electrolyte Assessment Level E IEC 384-18-2ED 1

IECQ QC 302302/ JP0001 Electronic Components: Fixed Aluminium ElectrolyticChip Capacitors with Non-Solid Electrolyte; Assessment Level E (Tubular, Polar, Metallic Case)

IECQ QC 302400 Fixed Capacitors for Use in Electronic EquipmentPart 14: Sectional Specification: Fixed Capacitorsfor Electromagnetic Interference SuppressionConnection to the Supply Mains IEC 384-14 ED 2

IECQ QC 302401 Fixed Capacitors for Use In Electronic EquipmentPart 14: Blank Detail Specification: FixedCapacitors for Electromagnetic InterferenceSuppression Connection to the Supply MainsAssessment Level D IEC 384-14-1 ED 1

IECQ QC 390000 Fixed Film Resistor Networks for Use in ElectronicEquipment Part 1: Generic Specification IEC 1045-1ED 1

IECQ QC 390100 Fixed Film Resistor Networks for Use in ElectronicEquipment Part 2: Sectional Specification for FilmResistor Networks of Assessed Quality on the Basisof the Capability Approval Procedure IEC 1045-2 ED1

IECQ QC 390101 Fixed Film Resistor Networks for Use in ElectronicEquipment Part 2: Blank Detail Specification forFilm Resistor Networks of Assessed Quality on theBasis of the Capability Approval ProcedureAssessment Level E IEC 1045-2-1 ED 1

IECQ QC 400000 Fixed Resistors for Use in Electronic EquipmentPart 1: Generic Specification Amendment 2-1987, Incorporating Amendment 1; Amendment 3-1989;


Amendment 4-1993; IEC 115-1 ED 2 IECQ QC 400100 Fixed Resistors for Use in Electronic Equipment

Part 2: Sectional Specification: Fixed Low-PowerNon-Wirewound Resistors IEC 115-2 ED 2

IECQ QC 400100/ SG 0001 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors (FixedCarbon Film Resistors)

IECQ QC 400101 Fixed Resistors for Use in Electronic EquipmentPart 2: Blank Detail Specification: Fixed Low-PowerNon-Wirewound Resistors Assessment Level E IEC115-2-1 ED 1

IECQ QC 400101/ CN 0001 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors Fixed MetalFilm Resistors, Type RJ14 Assessment Level E

IECQ QC 400101/ CN 0002 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors FixedCarbon Film Resistors, Type RT14 Assessment Level E

IECQ QC 400101/ CN 0003 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors FixedCarbon Film Resistors, Type RT13 Assessment Level E

IECQ QC 400101/ CN 0004 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors Fixed MetalFilm Resistors, Type RJ15 Assessment Level E

IECQ QC 400101/ CS 0001 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors (Metal FilmResistors) TR296

IECQ QC 400101/ GB 0002 IS 1 Fixed Low-Power Non-Wirewound ResistorsInsulated

IECQ QC 400101/ GB 0003 IS 1 Fixed Low-Power Non-Wirewound ResistorsInsulated

IECQ QC 400101/ HU 0001 Fixed Low-Power Non-Wirewound Resistors IECQ QC 400101/ JP 0001 Detail Specification for Electronic Components

Fixed Low-Power Non-Wirewound Resistors (HighStability Metal Film Resistors)

IECQ QC 400101/ JP 0002 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors (CarbonFilm Resistors)

IECQ QC 400101/ JP 0003 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors (FixedMetal Oxide Film Resistors)

IECQ QC 400101/ JP 0004 Detail Specification for Electronic ComponentsFixed Low-Power Non-Wirewound Resistors (Metal FilmResistors)

IECQ QC 400101/ RU 0005 (WITHDRAWN) Detail Specification for Fixed Low-Power Non-Wirewound Resistors Type C2-23

IECQ QC 400101/ SG 0001 Fixed Low-Power Non- Wirewound Resistors (FixedCarbon Film Resistors)

IECQ QC 400101/ SU 0001 (WITHDRAWN) Detail Specification for ElectronicComponents Fixed Low-Power Non-Wirewound Thin FilmMetal Dielectric a.c. and d.c. Resistors



IECQ QC 400101/ SU 0004 (WITHDRAWN) Detail Specification for ElectronicComponents Fixed Low-Power Non-Wirewound CarbonFilm a.c. and d.c. Resistors Type CI-4M

IECQ QC 400101/ SU 0006 (WITHDRAWN) Detail Specification for ElectronicComponents Fixed Low-Power Non-Wirewound Metal Filma.c. and d.c. and Pulse Resistors Type PI-4

IECQ QC 400101/US 0001 Resistors for Use in Electronic Equipment DetailSpecification: Fixed Low-Power Non-Wirewound


Resistors of Assessed Quality IECQ QC 400101/ US 0002 Resistors for Use in Electronic Equipment: Detail

Specification: Fixed Low-Power Non-WirewoundResistors, Insulated, Standard Film

IECQ QC 400101/ US 0003 Resistors for Use in Electronic Equipment: DetailSpecification: Fixed Low-Power Non-WirewoundResistors Insulated, Carbon Film

IECQ QC 400101/ US 0004 Resistors for Use in Electronic Equipment: DetailSpecification: Surface Mountable Fixed Low PowerResistors of Assessed Quality

IECQ QC 400102 Fixed Resistors for Use in Electronic EquipmentPart 2: Blank Detail Specification: Fixed Low-PowerNon-Wirewound Resistors Assessment Level F IEC115-2-2 ED 1

IECQ QC 400200 Fixed Resistors for Use in Electronic EquipmentPart 4: Sectional Specification: Fixed PowerResistors (Amendment 1-1993) (IEC 115-4 ED 2)

IECQ QC 400201 Fixed Resistors for Use in Electronic EquipmentPart 4: Blank Detail Specification: Fixed PowerResistors Assessment Level E (Amendment 1-1993) (IEC 115-4-1 ED 1)

IECQ QC 400201/GB 0001 ISSUE 1 Fixed Power Wirewound Resistors IECQ QC 400201/ US 0001 Fixed Power Resistors with Axial Leads; Wirewound

Provided with Vitreous Enamel Coating Free ofSilicone or Other Organic Materials; ConformallyCoated or Molded

IECQ QC 400201/ US 0002 Specifications for Use in Electronic EquipmentDetail Specification: Fixed Power WirewoundResistors Insulated, Assessment Level E, StabilityClass 0.5%

IECQ QC 400201/ US 0003 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Power WirewoundResistors; Insulated, Assessment Level E, StabilityClass 5%

IECQ QC 400201/ US 0004 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Power WirewoundResistors; Wirewound Insulated Heat-Sink Resistorswith Rigid Termination

IECQ QC 400201/US 0005 ISSUE 1 Resistors for Use in Electronic EquipmentDetail Specification: Surface Mountable Fixed PowerResistors of Assessed Quality

IECQ QC 400201 XX0001 Fixed Resistors for Use in Electronic EquipmentPart 4: Detail Specification: Fixed Power WirewoundResistors with Solderable Axial Wire Leads - Stability Class 5% - Assessment Level E (IEC115-4-101 ED 1)

IECQ QC 400201 XX0002 Fixed Resistors for Use in Electronic EquipmentPart 4: Detail Specification: Fixed Power WirewoundResistors with Solderable Axial Wire Leads - Stability Class 1% - Assessment Level E (IEC115-4-102 ED 1)

IECQ QC 400202 Fixed Resistors for Use in Electronic EquipmentPart 4: Blank Detail Specification: Fixed PowerResistors Assessment Level F (IEC 115-4-2 ED 1)

IECQ QC 400203 Fixed Resistors for Use in Electronic EquipmentPart 4: Blank Detail Specification: Fixed PowerResistors, Heat-Sink Types Assessment Level H (IEC115-4-3 ED 1)

IECQ QC 400300 Fixed Resistors for Use in Electronic EquipmentPart 5: Sectional Specification: Fixed PrecisionResistors (IEC 115-5 ED 2)

IECQ QC 400301 Fixed Resistors for Use in Electronic EquipmentPart 5: Blank Detail Specification: Fixed PrecisionResistors Assessment Level E (IEC 115-5-1 ED 1)


IECQ QC 400301 XX0001 Fixed Resistors for Use in Electronic EquipmentPart 5: Detail Specification: Fixed PrecisionWirewound Resistors with Solderable Axial WireLeads - Stability Class 0,1% - Assessment Level E (IEC 115-5-101 ED 1)

IECQ QC 400302 Fixed Resistors for Use in Electronic EquipmentPart 5: Blank Detail Specification: Fixed PrecisionResistors Assessment Level F (IEC 115-5-2 ED 1)

IECQ QC 400400 Fixed Resistors for Use in Electronic EquipmentPart 6: Sectional Specification: Fixed ResistorNetworks with Individually Measurable Resistors (Amendment 1-1987) (IEC 115-6 ED 1)

IECQ QC 400401 Fixed Resistors for Use in Electronic EquipmentPart 6: Blank Detail Specification: Fixed ResistorNetworks with Individually Measurable Resistors, All of Equal Value and Equal Dissipation AssessmentLevel E (IEC 115-6-1 ED 1)

IECQ QC 400401/ XX 0001 Fixed Resistors for Use in Electronic EquipmentPart 6: Detail Specification: Fixed Thick FilmResistor Networks with Individually MeasurableResistors, All of Equal Value and EqualDissipation, Class 1 (Dual-in-Line Network)

IECQ QC 400401/ XX 0002 Fixed Resistors for Use in Electronic EquipmentPart 6: Detail Specification: Fixed Thick FilmResistor Networks with Individually MeasurableResistors, All of Equal Value and EqualDissipation, Class 1 (Single-in-Line Network)

IECQ QC 400401/ JP 0001 Detail Specification for Use in ElectronicEquipment: Fixed Resistor Networks withIndividually Measurable Resistors, All of EqualValue and Equal Dissipation Single-in- Line withConnected Resistors

IECQ QC 400401/ JP 0002 Detail Specification for Use in ElectronicEquipment: Fixed Resistor Networks withIndividually Measurable Resistors, All of EqualValue and Equal Dissipation Single-in- Line withIsolated Resistors

IECQ QC 400401/ US 0001 Detail Specification for Use in ElectronicEquipment: Fixed Resistor Networks withIndividually Measurable Resistors, All of EqualValue and Equal Dissipation Single-in- Line withAll Resistors Connected (Amended October 1985)

IECQ QC 400401/ US 0002 Detail Specification for Use in ElectronicEquipment: Fixed Resistor Networks withIndividually Measurable Resistors, All of EqualValue and Equal Dissipation Single-in- Line withIsolated Resistors (Amended October 1985)

IECQ QC 400401/ US 0003 Detail Specification for Use in ElectronicEquipment: Fixed Resistor Networks withIndividually Measurable Resistors, All of EqualValue and Equal Dissipation Dual-in- Line with AllResistors Connected (Amended October 1985)

IECQ QC 400401/ US 0004 Detail Specification for Use in ElectronicEquipment: Fixed Resistor Networks withIndividually Measurable Resistors, All of EqualValue and Equal Dissipation Dual-in- Line withIsolated Resistors (Amended October 1985)

IECQ QC 400402 Fixed Resistors for Use in Electronic EquipmentPart 6: Blank Detail Specification: Fixed ResistorNetworks with Individually Measurable Resistors, ofEither Different Resistance Values or DifferentRated Dissipations Assessment Level E (IEC 115-6-2ED 1)

IECQ QC 400500 Fixed Resistors for Use in Electronic EquipmentPart 7: Sectional Specification: Fixed Resistor


Networks in Which Not All Resistors AreIndividually Measurable (IEC 115-7 ED 1)

IECQ QC 400501 Fixed Resistors for Use in Electronic EquipmentPart 7: Blank Detail Specification: Fixed ResistorNetworks in Which Not All Resistors AreIndividually Measurable Assessment Level E (IEC115-7-1 ED 1)

IECQ QC 400600 Fixed Resistors for Use in Electronic EquipmentPart 8: Sectional Specification: Fixed ChipResistors (IEC 115-8 ED 1)

IECQ QC 400601 Fixed Resistors for Use in Electronic EquipmentPart 8: Blank Detail Specification: Fixed ChipResistors Assessment Level E (IEC 115-8-1 ED 1)

IECQ QC 400601/ JP 0001 Detail Specification for Electronic ComponentsFixed Chip Resistors

IECQ QC 400601/US 0001 ISSUE 1 Resistors for Use in ElectrotechnicalEquipment Detail Specification: Fixed ChipResistors Style RR 0805

IECQ QC 400601/US 0002 ISSUE 1 Resistors for Use in ElectrotechnicalEquipment Detail Specification: Fixed ChipResistors Style RR 1206

IECQ QC 410100 Potentiometers for Use in Electronic Equipment Part2: Sectional Specification Lead- Screw Actuated andRotary Preset Potentiometers (IEC 393-2 ED 1)

IECQ QC 410101 Potentiometers for Use in Electronic Equipment Part2: Blank Detail Specification: Lead-Screw Actuatedand Rotary Preset Potentiometers Assessment LevelE (IEC 393-2-1 ED 1)

IECQ QC 410101/XX 0001 Potentiometers for Use in Electronic Equipment - Part 2: Detail Specification: Lead-Screw ActuatedPreset Potentiometers - Stability Class 5 % - Assessment Level E (IEC 393-2-101 ED 1)

IECQ QC 410102 Potentiometers for Use in Electronic Equipment Part2: Blank Detail Specification: Lead- Screw Actuatedand Rotary Preset Potentiometers Assessment LevelF (IEC 393-2-2 ED 1)

IECQ QC 410200 Potentiometers for Use in Electronic Equipment Part4: Sectional Specification: Single- Turn RotaryPower Potentiometers (IEC 393-4 ED 1)

IECQ QC 410203 Potentiometers for Use in Electronic Equipment Part4: Blank Detail Specification: Single- Turn RotaryPower Potentiometers Assessment Level E (IEC393-4-1 ED 1)

IECQ QC 410204 Potentiometers for Use in Electronic Equipment Part4: Blank Detail Specification: Single- Turn RotaryPower Potentiometers Assessment Level F (IEC393-4-2 ED 1)

IECQ QC 410300 Potentiometers for Use in Electronic Equipment Part5: Sectional Specification: Single- Turn RotaryLow-Power Wirewound and Non- WirewoundPotentiometers (IEC 393-5 ED 2)

IECQ QC 410301 Potentiometers for Use in Electronic Equipment Part5: Blank Detail Specification: Single- Turn RotaryLow-Power Potentiometers Assessment Level E (IEC393-5-1 ED 1)

IECQ QC 410302 Potentiometers for Use in Electronic Equipment Part5: Blank Detail Specification: Single- Turn RotaryLow-Power Potentiometers Assessment Level F (IEC393-5-2 ED 1)

IECQ QC 410400 Potentiometers for Use in Electronic Equipment Part3: Sectional Specification: Rotary PrecisionPotentiometers (IEC 393-3 ED 2)

IECQ QC 410402 Potentiometers for Use in Electronic Equipment Part3: Blank Detail Specification: Rotary Precision


Potentiometers Assessment Level E (IEC 393-3-1 ED1)

IECQ QC 420000 Varistors for Use in Electronic Equipment Part 1: Generic Specification (IEC 1051-1 ED 1)

IECQ QC 420100 Varistors for Use in Electronic Equipment Part 2: Sectional Specification for Surge SuppressionVaristors (IEC 1051-2 ED 1)

IECQ QC 420101 Varistors for Use in Electronic Equipment Part 2: Blank Detail Specification for Silicon CarbideSurge Suppression Varistors - Assessment Level E (IEC 1051-2-1 ED 1)

IECQ QC 420102 Varistors for Use in Electronic Equipment Part 2: Blank Detail Specification for Zinc Oxide SurgeSuppression Varistors - Assessment Level E (IEC1051-2-2 ED 1)

IECQ QC 440000 Directly Heated Positive Step-Function TemperatureCoefficient Thermistors Part I: GenericSpecification (IEC 738-1 ED 1)

IECQ QC 440001 Directly Heated Positive Step-Function TemperatureCoefficient Thermistors Part 1: Blank DetailSpecification Assessment Level E (IEC 738-1-1 ED 1)

IECQ QC 440001/JP 0001 Detail Specification for Use in ElectronicEquipment: Directly Heated Positive Step- FunctionTemperature Coefficient Thermistors AssessmentLevel E (Disk Type, Radial Lead, Resin Coated)

IECQ QC 440001/JP 0002 Detail Specification for Use in ElectronicEquipment: Directly Heated Positive Step- FunctionTemperature Coefficient Thermistors AssessmentLevel E (Disk Type, Spring Terminal Lead, PlasticCase)

IECQ QC 440001/JP 0003 Detail Specification for Use in ElectronicEquipment: Directly Heated Positive Step- FunctionTemperature Coefficient Thermistors. AssessmentLevel E (Disk Type, Spring Terminal Lead, PlasticCase)

IECQ QC 440001/JP 0004 Electronic Equipment: Directly Heated Positive StepFunction Temperature Coefficient Thermistors. Assessment Level E (Disk Type, Spring TerminalLead, Plastic Case)

IECQ QC 480000 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High SpeedData Applications - Part 1: Generic Specification (Corrigendum-1995) (Amendment 1-1996) (IEC 1076-1ED 1)

IECQ QC 480201/XX 0002 Connectors with Assessed Quality, for Use in D.C., Low-Frequency Analogue and in Digital High-SpeedData Applications - Part 3: Rectangular Connectors - Section 101: Detail Specification for a Range ofShielded Connectors with Trapezoidal Shaped Shellsand Non-Removable Rectangular Contacts on a 1,27 mmx 2,54 mm Centre-Line First Edition; IEC61076-3-101 ED 1

IECQ QC 480300 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-SpeedData Applications - Part 4: SectionalSpecification - Printed Board Connectors (IEC1076-4 ED 1)

IECQ QC 480301 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-SpeedData Applications - Part 4: Printed BoardConnectors - Section 001: Blank DetailSpecification (IEC 1076-4-001 ED 1)

IECQ QC 480301/XX 0001 Connectors with Assessed Quality for Use in d.c andLow Frequency Analogue Applications and in DigitalApplications with High Speed Data Rates - Part 4:


Printed Board Connectors - Section 100: DetailSpecification Two-Part Connector Modules Having aGrid of 2,5 mm (0,098 in) for Printed Boards andBackplanes (IEC 1076-4-100 ED 1)

IECQ QC 480301/XX 0002 Connectors with Assessed Quality, for Use in d.c. Low-Frequency Analogue and in Digital High SpeedData Applications - Part 4: Printed BoardConnectors - Section 101: Detail Specification forTwo-Part Connector Modules Having a Basic Grid of2,0 mm for Printed Boards and Backplanes inAccordance with IEC 917 (IEC 1076-4-101 ED 1)

IECQ QC 480301/XX 0003 Connectors with Assessed Quality for Use in d.c., Low-Frequency Analogue and in Digital High SpeedData Applications - Part 4: Printed BoardConnectors - Section 102: Detail Specification forTwo-Part Single-Pole Connectors, for Multiple Useson Plug-In Units, with Pre-Centring, Coding andEarly Mating Features, Having a Metric Grid inAccordance with IEC 60917 IEC 61076-4-102 ED 1 : 1997

IECQ QC 480301/XX 0006 Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High-SpeedData Applications - Part 4: Printed BoardConnectors - Section 105: Detail Specification for9 mm Circular Connector with 3 to 8 Contacts forUse in a Wide Range of Applications Including theTelecommunication and Audio Industry (IEC1076-4-105 ED 1)

IECQ QC 660000 Piezoelectric Ceramic Filters for Use in ElectronicEquipment - a Specification in the IEC QualityAssessment System for Electronic Components (IECQ) Part 1: Generic Specification - QualificationApproval (IEC 1261-1 ED 1)

IECQ QC 660100 Piezoelectric Ceramic Filters for Use in ElectronicEquipment - a Specification in the IEC QualityAssessment System for Electronic Components (IECQ) Part 2: Sectional Specification - QualificationApproval IEC 1261-2 ED 1

IECQ QC 660101 Piezoelectric Ceramic Filters for Use in ElectronicEquipment - a Specification in the IEC QualityAssessment System for Electronic Components(IECQ) Part 2: Sectional Specification - QualificationApproval Section 1: Blank Detail Specification - Assessment Level E IEC 1261-2-1 ED 1

IECQ QC 670000 Piezoelectric Ceramic Resonators - A Specificationin the IEC Quality Assessment System for ElectronicComponents (IECQ) Part 1: Generic Specification - Qualification Approval (IEC 1253-1 ED 1)

IECQ QC 670100 Piezoelectric Ceramic Resonators - A Specificationin the IEC Quality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional Specification - Qualification Approval (IEC 1253-2 ED 1)

IECQ QC 670101 Piezoelectric Ceramic Resonators - A Specificationin the IEC Quality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional Spec. - Qualification Approval Section 1: Blank DetailSpec. - Assessment Level E (IEC 1253-2-1 ED 1)

IECQ QC 680000 Quartz Crystal Units - A Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 1: Generic Specification (IEC 1178-1 ED 1)

IECQ QC 680100 Quartz Crystal Units - A Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional SpecificationCapability Approval (IEC 1178-2 ED 1)


IECQ QC 680101 Quartz Crystal Units - A Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 2: Sectional SpecificationCapability Approval Section 1: Blank DetailSpecification (IEC 1178-2-1 ED 1)

IECQ QC 680200 Quartz Crystal Units - A Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 3: Sectional SpecificationQualification Approval (IEC 1178-3 ED 1)

IECQ QC 680201 Quartz Crystal Units - A Specification in the IECQuality Assessment System for ElectronicComponents (IECQ) Part 3: Sectional SpecificationQualification Approval Section 1: Blank DetailSpecification (IEC 1178-3-1 ED 1)

IECQ QC 690000 Quartz Crystal Controlled Oscillators of AssessedQuality - Part 1: Generic Specification SecondEdition; IEC 60679-1

IECQ QC 690100 Quartz Crystal Controlled Oscillators of AssessedQuality - Part 4: Sectional Specification - Capability Approval First Edition; IEC60679-4:1997

IECQ QC 690101 Quartz Crystal Controlled Oscillators of AssessedQuality - Part 4-1: Blank Detail Specification - Capability Approval First Edition

IECQ QC 700000 Semiconductor Devices Part 10: GenericSpecification for Discrete Devices and IntegratedCircuits (IEC 747-10 ED 2); (Amendment 1-1995), (Amendment 2-1996)

IECQ QC 700000 ISSUE 2 Harmonized System of Quality Assessment forElectronic Components Semiconductor Devices. Generic Specification for Discrete Devices andIntegrated Circuits IEC 747-10:1991; IncorporatingAmendment No.1:1997

IECQ QC 720100 Semiconductor Devices Part 12: SectionalSpecification for Optoelectronic Devices (IEC747-12 ED 1)

IECQ QC 720101 Semiconductor Devices - Part 12: OptoelectronicDevices - Section 1: Blank Detail Specification forlight Emitting/Infrared Emitting Diodes with/Without Pigtail for Fibre Optic Systems and Sub-Systems (En, Fr) (IEC 747-12-1 ED 1)

IECQ QC 720102 Semiconductor Devices Part 12: OptoelectronicDevices - Section 2: Blank Detail Specification forLaser Diode Modules with Pigtail for Fibre OpticSystems and Sub-Systems (IEC 747-12-2 ED 1)

IECQ QC 720103 Semiconductor Devices - Part 12-3: OptoelectronicDevices - Blank Detail Specification for Light-Emitting Diodes - Display Application First Edition

IECQ QC 720104 Semiconductor Devices - Part 12-4: OptoelectronicDevices - Blank Detail Specification for pin-FETModules with/without Pigtail, for Fibre OpticSystems or Subsystems ED 1; IEC 60747-12-4: 1997 ED1

IECQ QC 720105 Semiconductor Devices - Part 12-5: OptoelectronicDevices - Blank Detail Specification for Pin-Photodiodes with/without Pigtail, for Fibre OpticSystems or Subsystems ED 1; IEC 60747-12-5: 1997 ED1

IECQ QC 720106 Semiconductor Devices - Part 12-6: OptoelectronicDevices - Blank Detail Specification for AvalanchePhotodiodes with/without Pigtail, for Fibre OpticSystems or Subsystems ED 1; IEC 60747-12-6: 1997 ED1

IECQ QC 720200 Liquid Crystal and Solid State Display Devices - Part 3: Sectional Specification for Liquid


Crystal Display (LCD) Cells IECQ QC 750100 Semiconductor Devices Part 11: Sectional

Specification for Discrete Devices IEC 747-11 ED 1 : 1985; Amendment 1 : 1991; Amendment 2 : 1996

IECQ QC 750100 (WITHDRAWN) Semiconductor Devices Part 11: Sectional Specification for Discrete Devices IEC747-11 ED 1; Amendment 1 - 1991; Amendment 2 - 1996

IECQ QC 750101 Semiconductor Devices Discrete Devices Part 3: Signal (Including Switching) and Regulator Diodes, Section One - Blank Detail Specification for SignalDiodes, Switching Diodes and Controlled-AvalancheDiodes (IEC 747-3-1 ED 1)

IECQ QC 750101/ CN 0001 Detail Specification for Electronic ComponentsSilicon Switching Diode for Type 2CK120 AssessmentLevel II

IECQ QC 750101/GB 0001 ISSUE 1 Silicon Ambient Rated High Speed SwitchingDiode in Plastic Encapsulation

IECQ QC 750101/SU 0001 (WITHDRAWN) Detail Specification for ElectronicComponents Signal Semiconductor Epitaxy- PlanarAmbient-Rated Diodes for Pulse and Digital Circuitsof Electronic Equipment Type KD5I0A

IECQ QC 750101/SU 0002 (WITHDRAWN) Detail Specification for ElectronicComponents Signal Semiconductor Epitaxy-PlanarAmbient- Rated Diodes for Pulse and DigitalCircuits of Electronic Equipment Type KD52IA, KD52IB

IECQ QC 750101/SU 0003 (WITHDRAWN) Detail Specification for ElectronicComponents Signal Semiconductor Epitaxy- PlanarAmbient-Rated Diodes for Pulse and Digital Circuitsof Electronic Equipment Type KD522B

IECQ QC 750101/SU 0004 (WITHDRAWN) Detail Specification for ElectronicComponents Semiconductor Diodes, Ambient-RatedDesignated for Circuits in TV Receivers SwitchingDiodes (Sw), Type KD805A

IECQ QC 750102 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section One - Blank DetailSpecification for Ambient-Rated Bipolar Transistorsfor Low and High- Frequency Amplification (IEC747-7-1 ED 1)

IECQ QC 750102/CN 0001 Detail Specification for Electronic ComponentsBipolar Transistors for Ambient-Rated High- Frequency Amplification of Type 3DG130 AssessmentLevel II

IECQ QC 750102/CN 0002 Detail Specification for Electronic ComponentsBipolar Transistors for Ambient-Rated, ForwardA.G.C. Low-Noise, High- Frequency Amplification ofType 3DG79 Assessment Level II

IECQ QC 750102/CN 0003 Detail Specification for Electronic ComponentsBipolar Transistors for Ambient-Rated High- Frequency Amplification of Type 3DG1815 AssessmentLevel II

IECQ QC 750102/ SU 0001 (WITHDRAWN) Detail Specification for ElectronicComponents High- Frequency Epitaxy-Planar Ambient-Rated Bipolar Transistors Type KT3II7A

IECQ QC 750103 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Two - Blank DetailSpecification for Case-Rated Bipolar Transistorsfor Low- Frequency Amplification (IEC 747-7-2 ED 1)

IECQ QC 750103/ CN 0001 Detail Specification for Electronic ComponentsCase-Rated Bipolar Transistors for Low-FrequencyAmplification Type 3DD870

IECQ QC 750104 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Three - Blank DetailSpecification for Bipolar Transistors for Switching


Applications (IEC 747-7-3 ED 1) IECQ QC 750104/ CN 0001 Detail Specification for Electronic Components

Bipolar Transistors for Switching Application ofType 3DK 106 Assessment Level II

IECQ QC 750105 Semiconductor Devices; Discrete Devices Part 3: Signal (Including Switching) and Regulator DiodesSection Two-Blank Detail Specification for Voltage-Regulator Diodes and Voltage-Reference Diodes, Exluding Temperature-Compensated Precision Ref. Diodes (IEC 747-3-2 ED 1)

IECQ QC 750105/ IN 0001 Detail Specification for Electronic Component: 500mW Silicon Zener Diodes in DO-35 Glass PackageType: BZX55 C2V7 to C47 Assessment Level: CategoryI

IECQ QC 750106 Semiconductor Devices Discrete Devices Part 8: Field-Effect Transistors Section Two - Blank DetailSpecification for Field-Effect Transistors forCase-Rated Power Amplifier Applications (IEC747-8-2 ED 1)

IECQ QC 750107 Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Four - Blank DetailSpecification for Case-Rated Transistors for High- Frequency Amplification (IEC 747-7-4 ED 1)

IECQ QC 750108 Semiconductor Devices Discrete Devices Part 2: Rectifier Diodes Section One - Blank DetailSpecification for Rectifier Diodes (IncludingAvalanche Rectifier Diodes), Ambient and Case-Rated, up to 100A (IEC 747-2-1 ED 1)

IECQ QC 750108/ CN 0001 Detail Specification for Electronic ComponentsSwitching Rectifier Diodes for Type 2CZ201, 2CZ202and 2CZ203 Assessment Level II

IECQ QC 750108/ CN 0002 Detail Specification for Electronic ComponentsAmbient- Rated Silicon Rectifier Diode for Type2CZ321 Assessment Level II

IECQ QC 750108/ CN 0003 Detail Specification for Electronic ComponentsAmbient- Rated Silicon Rectifier Diode for Type2CZ322 Assessment Level II

IECQ QC 750108/ CN 0004 Detail Specification for Electronic ComponentsGlass Passivated High Voltage Rectifier Stack forTypes 2CL24, 2CL25, 2CL27 and 2CL29 (AssessmentLevel II

IECQ QC 750108/ CN 0005 Detail Specification for Electronic ComponentsAmbient-Rated Silicon Rectifier Diode for Type2CZ308



IECQ QC 750108/ CN 0008 Detail Specification for Electronic ComponentsAmbient- Rated Silicon Rectifier Diode for Type2CZ317



IECQ QC 750109 Semiconductor Devices - Discrete Devices - Part 2: Rectifier Diodes - Section 2: Blank Detail Spec forRectifier Diodes (Including Avalanche RectifierDiodes), Ambient and Case-Rated, for CurrentsGreater Than 100 A (IEC 747-2-2 ED 1)


IECQ QC 750110 Semiconductor Devices Discrete Devices Part 6: Thyristors Section One - Blank Detail Specificationfor Reverse Blocking Triode Thyristors, Ambient andCase- Rated, up to 100A (IEC 747-6-1 ED 1)

IECQ QC 750111 Semiconductor Devices Discrete Devices Part 6: Thyristors Section Two - Blank Detail Specificationfor Bidirectional Triode Thyristors (Triacs), Ambient or Case- Rated, up to 100A (IEC 747-6-2 ED1)

IECQ QC 750112 Semiconductor Devices Discrete Devices Part 8: Field-Effect Transistors Section One - Blank DetailSpecification for Single-Gate Field- EffectTransistors, up to 5W and 1 GHz (IEC 747-8-1 ED 1)

IECQ QC 750113 Semiconductor Devices; Discrete Devices Part 6: Thyristors Section Three - Blank DetailSpecification for Reverse Blocking TriodeThyristors, Ambient and Case-Rated, for CurrentsGreater Than 100 A (IEC 747-6-3 ED 1)

IECQ QC 750114 Semiconductor Devices - Discrete Devices - Part 8: Field-Effect Transistors - Section 3: Blank DetailSpecification for Case-Rated Field-EffectTransistors for Switching Applications (IEC 747-8-3ED 1)

IECQ QC 750114 Harmonized System of Quality Assessment forElectronic Components Semiconductor Devices - Discrete Devices Field-Effect Transistors - BlankDetail Specification for Case-Rated Field-EffectTransistors for Switching Applications IEC747-8-3:1995

IECQ QC 760000 Semiconductor Devices Integrated Circuits Part 20: Generic Specification for Film Integrated Circuitsand Hybrid Film Integrated Circuits (IEC 748-20 ED1)

IECQ QC 760000 Semiconductor Devices - Integrated Circuits - Part20: Generic Specification for Film IntegratedCircuits and Hybrid Film Integrated Circuits (IEC748-20 ED 1) (Amendment 1 - 1995)

IECQ QC 760000 Semiconductor Devices Integrated Circuits Part 20: Generic Specification for Film Integrated Circuitsand Hybrid Film Integrated Circuits IEC 748-20: 1988; AMD 6754; September 1991; AMD 9331 January15, 1997

IECQ QC 760100 (WITHDRAWN) Semiconductor Devices IntegratedCircuits Part 21: Sectional Specification for FilmIntegrated Circuits and Hybrid Film IntegratedCircuits on the Basis of Qualification ApprovalProcedure IEC 748-21 ED 1

IECQ QC 760100 Semiconductor Devices - Integrated Circuits - Part21: Sectional Specification for Film IntegratedCircuits on the Basis of Qualification ApprovalProcedures ED 2; IEC 60748-21: 1997 ED 2

IECQ QC 760101 (WITHDRAWN) Semiconductor Devices - IntegratedCircuits Part 21: Section One: Blank DetailSpecification for Film Integrated Circuits andHybrid Film Integrated Circuits on the Basis ofQualification Approval Procedure IEC 748-21-1 ED 1

IECQ QC 760101 Semiconductor Devices - Integrated Circuits - Part21-1: Blank Detail Specification for FilmIntegrated Circuits and Hybrid Film IntegratedCircuits on the Basis of Qualification ApprovalProcedures ED 2; IEC 60748-21-1: 1997 ED 2

IECQ QC 760200 (WITHDRAWN) Semiconductor Devices IntegratedCircuits Part 22: Sectional Specification for FilmIntegrated Circuits and Hybrid Film IntegratedCircuits on the Basis of the Capability Approval


Procedures IEC 748-22 ED 1 IECQ QC 760200 Semiconductor Devices - Integrated Circuits - Part

22: Sectional Specification for Film IntegratedCircuits and Hybrid Film Integrated Circuits on theBasis of the Capability Approval Procedures ED 2; IEC 60748-22: 1997 ED 2

IECQ QC 760201 (WITHDRAWN) Semiconductor Devices IntegratedCircuits Part 22: Section One: Blank DetailSpecification for Film Integrated Circuits andHybrid Film Integrated Circuits on the Basis of theCapability Approval Procedures IEC 748-22-1 ED l

IECQ QC 760201 Semiconductor Devices - Integrated Circuits - Part22-1: Blank Detail Specification for FilmIntegrated Circuits and Hybrid Film IntegratedCircuits on the Basis of the Capability ApprovalProcedures ED 2; IEC 60748-22-1: 1997 ED 2

IECQ QC 763000 Semiconductor Devices - Integrated Circuits - Part20: Generic Specification for Film IntergratedCircuits and Hybrid Film Intergrated Circuits - Section 1: Requirements for Internal VisualExamination (IEC 748-20-1 ED 1)

IECQ QC 780000 Fibre Optic Terminus Sets - Part 1: GenericSpecification (IEC 1269-1 ED 1)

IECQ QC 780001 Fibre Optic Terminus Sets - Part 1-1: Blank DetailSpecification (IEC 1269-1-1 ED 1)

IECQ QC 790100 Semiconductor Devices Integrated Circuits Part 11: Sectional Specification for SemiconductorIntegrated Circuits Excluding Hybrid Circuits (IEC748-11 ED 1)

IECQ QC 790104 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Four - FamilySpecification for Complementary MOS DigitalIntegrated Circuits, Series 4 000 B and 4 000 UB (IEC 748-2-4 ED 1)

IECQ QC 790105 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Seven - BlankDetail Specification for Integrated CircuitFusible-Link Programmable Bipolar Read-OnlyMemories (IEC 748-2-7 ED 1)

IECQ QC 790106 Semiconductor Devices - Integrated Circuits - Part2: Digital Integrated Circuits - Section 9: BlankDetail Specification for MOS Ultraviolet LightErasable Electrically Programmable Read-OnlyMemories (IEC 748-2-9 ED 1)

IECQ QC 790107 Semiconductor Devices - Integrated Circuits - Part2: Digital Integrated Circuits - Section 10: BlankDetail Specification for Integrated Circuit DynamicRead/Write Memories (IEC 748-2-10 ED 1)

IECQ QC 790109 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Two - FamilySpecification for HCMOS Digital IntegratedCircuits, Series 54/74 HC, 54/74 HCT, 54/74 HCU (IEC 748-2-2 ED 1)

IECQ QC 790110 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Six - BlankDetail Specification for Microprocessor IntegratedCircuits (IEC 748-2-6 ED 1)

IECQ QC 790111 Semiconductor Devices - Integrated Circuits - Part2: Digital Integrated Circuits - Section Eight - Blank Detail Specification for Integrated CircuitStatic Read/Write Memories (IEC 748-2-8 ED 1)

IECQ QC 790111/US 0001 ISSUE 1 Integrated Circuits for Use inElectrotechnical Equipment; Detail Specification: Integrated Circuit Static Read/Write Memory Type: 2048 X 8 Bits SRAM


IECQ QC 790130 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Three - BlankDetail Specification for HCMOS Digital IntegratedCircuits (Series 54/74 HC, 54/74 HCT, 54/74 HCU) (IEC 748-2-3 ED 1)

IECQ QC 790131 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Five - BlankDetail Specification for Complementary MOS DigitalIntegrated Circuits (Series 4 000 B and 4 000 UB) (IEC 748-2-5 ED 1)

IECQ QC 790132 Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section One - BlankDetail Specification for Bipolar Monolithic DigitalIntegrated Circuit Gates (Excluding UncommittedLogic Arrays) (IEC 748-2-1 ED 1)

IECQ QC 790132/BY 0001-BY0010 Detail Specification for Integrated Circuitsfrom Family K155

IECQ QC 790132/RF 0001-RF0011 Detail Specification for Integrated Circuitsfrom Family K1102AP SK1102AP4 - SK1102AP14

IECQ QC 790132/ SU 0001 (WITHDRAWN) Detail Specification for ElectronicComponents; Digital Integrated Circuits SeriesKI55 (IEC 748-2-1 ED 1)

IECQ QC 790132/SU 0005 Detail Specification for Electronic ComponentsDigital Integrated Circuits KII02AP4 - KII02AP14

IECQ QC 790202 Semiconductor Devices Integrated Circuits Part 3: Analogue Integrated Circuits Section One - BlankDetail Specification for Monolithic IntegratedOperational Amplifiers (IEC 748-3-1 ED 1)

IECQ QC 790300 Semiconductor Devices - Integrated Circuits - Part4: Interface Integrated Circuits IEC 60748-4 ED 2 : 1997

IECQ QC 790303 Semiconductor Devices - Integrated Circuits - Part4: Interface Integrated Circuits - Section 1: BlankDetail Specification for Linear Digital-to AnalogueConverters (DAC) (IEC 748-4-1 ED 1)

IECQ QC 790304 Semiconductor Devices - Integrated Circuits - Part4: Interface Integrated Circuits - Section 2: BlankDetail Specification for Linear Analogue-to- Digital Converters (ADC) (IEC 748-4-2 ED 1)

IECQ QC 800000 (WITHDRAWN) Fibre Optic Attenuators Part 1: GenericSpecification (IEC 869-1 ED 1)

IECQ QC 800000 Fibre Optic Attenuators - Part 1: GenericSpecification (IEC 869-1 ED 2)

IECQ QC 800001 Fibre Optic Attenuators - Part 1-1: Blank DetailSpecification (IEC 869-1-1 ED 1)

IECQ QC 810000 (WITHDRAWN) Fibre Optic Branching Devices Part 1: Generic Specification (IEC 875-1 ED 2)

IECQ QC 810000 Fibre Optic Branching Devices Part 1: GenericSpecification (IEC 875-1 ED 3)

IECQ QC 810001 Fibre Optic Branching Devices Part 1-1: BlankDetail Specification (IEC 875-1-1 ED 1)

IECQ QC 810100 Fibre Optic Branching Devices Part 2: SectionalSpecification - Non-Wavelength Selective BranchingDevices (IEC 875-2 ED 2)

IECQ QC 810200 Fibre Optic Branching Devices Part 3: SectionalSpecification - Wavelength Selective BranchingDevices (IEC 875-3 ED 2)

IECQ QC 820000 Fibre Optic Switches - Part 1: GenericSpecification (IEC 876-1 ED 2)

IECQ QC 830000 Fibre Optic Isolators - Part 1: GenericSpecification (IEC 1202-1 ED 1)

IECQ QC 830001 Fibre Optic Isolators - Part 1-1: Blank DetailSpecification (IEC 1202-1-1 ED 1)

IECQ QC 850000 (WITHDRAWN) Splices for Optical Fibres and Cables


Part 1: Generic Specification; (Corrigendum - June1991) (IEC 1073-1 ED 1)

IECQ QC 850000 Splices for Optical Fibres and Cables - Part 1: Generic Specification - Hardware and Accessories (IEC 1073-1 ED 2)

IECQ QC 850100 Splices for Optical Fibres and Cables Part 2: Sectional Specification: Splice Organizers andClosures for Optical Fibres and Cables (IEC 1073-2ED 1)

IECQ QC 850200 Splices for Optical Fibres and Cables Part 3: Sectional Specification: Fusion Splices for OpticalFibres and Cables (IEC 1073-3 ED 1)

IECQ QC 850300 Splices for Optical Fibres and Cables - Part 4: Sectional Specification - Mechanical Splices forOptical Fibres and Cables (IEC 1073-4 ED 1)

IECQ QC 860000 Fibre Optic Adaptors Part 1: Generic Specification (IEC 1274-1 ED 1)

IECQ QC 860001 Fibre Optic Adaptors Part 1-1: Blank DetailSpecification (IEC 1274-1-1 ED 1)

IECQ QC 870000 Fibre Optic Passive Components and CableAssemblies - Part 1: Capability Approval - GenericSpecification (IEC 1313-1 ED 1)

IECQ QC 880000 Fibre Optic Fan-Outs - Part 1: GenericSpecification (IEC 1314-1 ED 1)

IECQ QC 880001 Fibre Optic Fan-outs - Part 1-1: Blank DetailSpecification - Environmental Categories 1,2,3,5and 99 (IEC 1314-1-1 ED 1)

IECQ QC 910000 Connectors for Optical Fibers and Cables Part 1: Generic Specification; (IEC 874-1 ED 3) (Corrigendum-1993) (Amendment 1-1994) (Corrigendum-1-1996)

IECQ QC 910001 TO 910006 Connectors for Optical Fibres and Cables Part 1-1: Blank Detail Specification - EnvironmentalCategories; (IEC 874-1-1 ED 1) (Corrigendum-1996)

IECQ QC 910003XX0001 Connectors for Optical Fibres and Cables - Part10-1: Detail Specification for Fibre OpticConnector Type BFOC/2,5 Terminated to MultimodeFibre Type A1 ED 1; IEC 60874-10-1: 1997 ED 1

IECQ QC 910003XX0002 Connectors for Optical Fibres and Cables - Part10-2: Detail Specification for Fibre OpticConnector Type BFOC/2,5 Terminated to Single-ModeFibre Type B1 ED 1; IEC 60874-10-2: 1997 ED 1

IECQ QC 910003XX0003 Connectors for Optical Fibres and Cables - Part10-3: Detail Specification for Fibre Optic AdaptorType BFOC/2,5 for Single and Multimode Fibre ED 1; IEC 60874-14-3: 1997 ED 1

IECQ QC 910004XX0001 Connectors for Optical Fibres and Cables - Part14-1: Detail Specification for Fibre OpticConnector Type SC-PC Standard Terminated toMultimode Fibre Type A1a, A1b ED 1; IEC60874-14-1: 1997 ED 1

IECQ QC 910004XX0002 Connectors for Optical Fibres and Cables - Part14-2: Detail Specification for Fibre OpticConnector Type SC-PC Tuned Terminated to Single-Mode Fibre Type B1 ED 1; IEC 60874-14-2: 1997 ED 1

IECQ QC 910004XX0003 Connectors for Optical Fibres and Cables - Part14-3: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Single-Mode Fibre ED 1; IEC60874-14-3: 1997 ED 1

IECQ QC 910004XX0004 Connectors for Optical Fibres and Cables - Part14-4: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Multimode Fibre ED 1; IEC60874-14-4: 1997 ED 1

IECQ QC 910004XX0005 Connectors for Optical Fibres and Cables - Part


14-5: Detail Specification for Fibre OpticConnector Type SC-PC Untuned Terminated to Single-Mode Fibre Type B1 ED 1; IEC 60874-14-5: 1997 ED 1

IECQ QC 910004XX0006 Connectors for Optical Fibres and Cables - Part14-6; Detail Specification for Fibre OpticConnector Type SC-APC 9 Degrees Untuned Terminatedto Single-Mode Fibre Type B1 ED 1; IEC 60874-14-6: 1997 ED 1

IECQ QC 910004XX0007 Connectors for Optical Fibres and Cables - Part14-7: Detail Specification for Fibre OpticConnector Type SC-APC 9 Degrees Tuned Terminated toSingle-Mode Fibre Type B1 ED 1; IEC 60874-14-7: 1997 ED 1

IECQ QC 910099 Connectors for Optical Fibres and Cables Part 1-1: Blank Detail Specification - EnvironmentalCategories; (IEC 874-1-1 ED 1) (Corrigendum-1996)

IECQ QC 910100 Connectors for Optical Fibres and Cables Part 2: Sectional Specification for Fibre Optic Connector - Type F-SMA; (IEC 874-2 ED 2) (Corrigendum-1996)

IECQ QC 910200 Connectors for Optical Fibres and Cables Part 6: Sectional Specification for Fibre Optic Connector - Type LSA; (IEC 874-6 ED 2) (Doc. # Formerly QC210200) (Corrigendum- 1996)

IECQ QC 910300 Connectors for Optical Fibres and Cables Part 3: Sectional Specification for Fibre Optic Connector - Type CFO3; (IEC 874-3 ED 2) (Corrigendum-1996)

IECQ QC 910400 Connectors for Optical Fibres and Cables Part 5: Sectional Specification Fibre Optic Connector TypeBAM; (IEC 874-5 ED 2) (Corrigendum-1996)

IECQ QC 910500 Connectors for Optical Fibres and Cables Part 4: Sectional Specification for Fibre Optic Connector - Type CFO4; (IEC 874-4 ED 2) (Corrigendum-1996)

IECQ QC 910600 Connectors for Optical Fibres and Cables Part 8: Sectional Specification Fibre Optic Connector TypeD; (IEC 874-8 ED 1) (Doc. # Formerly QC 210600) (Corrigendum- 1996)

IECQ QC 910700 Connectors for Optical Fibres and Cables Part 7: Sectional Specification Fibre Optic Connector TypeFC; (IEC 874-7 ED 1) (Doc. # Formerly QC 210700) (Corrigendum- 1996)

IECQ QC 910800 Connectors for Optical Fibres and Cables Part 9: Sectional Specification for Fibre Optic Connector-Type OF-2; (IEC 874-9 ED 2) (Doc. # Formerly QC210800) (Corrigendum- 1996)

IECQ QC 911200 Connectors for Optical Fibres and Cables Part 10: Sectional Specification Fibre Optic Connector TypeBFOC/2,5; (IEC 874-10 ED 1) (Doc. # Formerly QC211200) (Corrigendum-1996)

IECQ QC 911300 Connectors for Optical Fibres and Cables - Part17: Sectional Specification for Fibre OpticConnector - Type F-05 (Friction Lock); (IEC 874-17ED 1) (Doc. # Formerly QC 211300) (Corrigendum-1996)

IECQ QC 911500 Connectors for Optical Fibres and Cables - Part12: Sectional Specification for Fibre OpticConnector - Type OCCA-BU; (IEC 874-12 ED 1) (Corrigendum-1996)

IECQ QC 911600 Connectors for Optical Fibres and Cables Part 11: Sectional Specification for Fibre Optic Connector - Type OCCA-PC; (IEC 874-11 ED 1) (Doc. # FormerlyQC 211600) (Corrigendum-1996)

IECQ QC 911700 Connectors for Optical Fibres and Cables Part 13: Sectional Specification for Fibre Optic Connector - Type CF 08; (IEC 874-13 ED 1) (Doc. # Formerly QC211700) (Corrigendum- 1996)


IECQ QC 911800 Connectors for Optical Fibres and Cables Part 14: Sectional Specification for Fibre Optic Connector - Type SC; (IEC 874-14 ED 1) (Doc. # Formerly QC211800) (Corrigendum- 1996)

IECQ QC 911900 Connectors for Optical Fibres and Cables - Part16: Sectional Specification for Fibre OpticConnector - Type MT; (IEC 874-16 ED 1) (Doc. # Formerly QC 211900) (Corrigendum- 1996)

IECQ QC 912000 Connectors for Optical Fibres and Cables Part 15: Sectional Specification for Fibre Optic Connector - Type DS; (IEC 874-15 ED 1) (Doc. # Formerly QC212000) (Corrigendum- 1996)

IECQ QC 912100 Connectors for Optical Fibres and Cables - Part19: Sectional Specification for Fibre OpticConnector - Type SC-D(uplex); (IEC 874-19 ED 1) (Doc. # Formerly QC 212100) (Corrigendum-1996)

IECQ QC 960000 Electromechanical Switches for Use in ElectronicEquipment Part 1: Generic Specification (IEC 1020-1ED 1)

IECQ QC 960100 Electromechanical Switches for Use in ElectronicEquipment Part 2: Sectional Specification forRotary Switches (IEC 1020-2 ED 1)

IECQ QC 960101 Electromechanical Switches for Use in ElectronicEquipment Part 2: Sectional Specification forRotary Switches Section 1 - Blank DetailSpecification (IEC 1020-2-1 ED 1)

IECQ QC 960101 XX0001 Electromechanical Switches for Use in ElectronicEquipment - Part 2: Sectional Specification forRotary Switches - Section 2: Detail Specificationfor Rotary Switches with Central Mounting, 12Positions, 17 mm Diameter (IEC 1020-2-2 ED 1)

IECQ QC 960200 Electromechanical Switches for Use in ElectronicEquipment Part 4: Sectional Specification forLever (Toggle) Switches (IEC 1020-4 ED 1)

IECQ QC 960201 Electromechanical Switches for Use in ElectronicEquipment Part 4: Sectional Specification forLever (Toggle) Switches Section 1 - Blank DetailSpecification (IEC 1020-4-1 ED 1)

IECQ QC 960201/ JP 0001 Detail Specification for: Toggle Switches ofAssessed Quality


IECQ QC 960201/ JP 0003 Detail Specification for: Slide Switches ofAssessed Quality


IECQ QC 960201XX 0001 Electromechanical Switches for Use in ElectricalEquipment - Part 4: Sectional Specification forLever (Toggle) Switches - Section 2: DetailSpecification for One Pole, Two Pole, Four Pole, Sealed Lever (Toggle) Switches, 277 V a.c. Maximum, 30 V d.c. Maximum, 20 A Maximum ElectricalRating (IEC 1020-4-2 ED 1)

IECQ QC 960300 Electromechanical Switches for Use in ElectronicEquipment Part 6: Sectional Specification forSensitive Switches (IEC 1020-6 ED 1)

IECQ QC 960301 Electromechanical Switches for Use in ElectronicEquipment Part 6: Sectional Specification forSensitive Switches Section 1 - Blank DetailSpecification (IEC 1020-6-1 ED 1)

IECQ QC 960301XX0 001 Electromechanical Switches for Use in ElectronicEquipment - Part 6: Sectional Specification forSensitive Switches - Section 2: DetailSpecification for One Pole, Unsealed Subminiature


Sensitive Switches, 250 V Maximum, 5 A MaximumElectrical Rating (IEC 1020-6-2 ED 1)

IECQ QC 960400 Electromechanical Switches for Use in ElectronicEquipment Part 5: Sectional Specification forPushbutton Switches (IEC 1020-5 ED 1)

IECQ QC 960401 Electromechanical Switches for Use in ElectronicEquipment Part 5: Sectional Specification forPushbutton Switches Section 1 - Blank DetailSpecification (IEC 1020-5-1 ED 1)

IECQ QC 960401/ JP 0001 Detail Specification for: Pushbutton Switches ofAssessed Quality



IECQ QC 960500 Electromechanical Switches for Use in ElectronicEquipment Part 3: Sectional Specification for In-Line Package Switches (IEC 1020-3 ED 1)

IECQ QC 960501 Electromechanical Switches for Use in ElectronicEquipment Part 3: Sectional Specification for In- Line Package Switches Section 1 - Blank DetailSpecification (IEC 1020-3-1 ED 1)

IECQ QC 960501 XX0001 Electromechanical Switches for Use in ElectronicEquipment - Part 3: Sectional Specification for In-Line Package Switches - Section 2: DetailSpecification for Dual In-Line Package (DIP), Switches,Raised and Recessed Rocker Actuated (IEC1020-3-2 ED 1)

IECQ PQC 1 Fixed Capacitors for Use in Electronic EquipmentSectional Specification: Fixed Niobium Capacitorswith Solid Electrolyte

IECQ PQC 2 Fixed Capacitors for Use in Electronic EquipmentBlank Detail Specification: Fixed NiobiumCapacitors with Solid Electrolyte and PorousAnode. Assessment Level E

IECQ PQC 3 Base Material for Printed Circuit IECQ PQC 4 Fixed Capacitors for Use in Electronic Equipment

Sectional Specification Fixed Capacitors of Glass - Ceramic Dielectric, Class 1

IECQ PQC 5 Fixed Capacitors for Use in Electronic EquipmentSectional Specification Fixed Capacitors of Glass - Ceramic Dielectric, Class 2

IECQ PQC 6 Fixed Capacitors for Use in Electronic EquipmentBlank Detail Specification: Fixed Capacitors ofGlass-Ceramic Dielectric, Class 1 Assessment LevelE

IECQ PQC 7 Fixed Capacitors for Use in Electronic EquipmentBlank Detail Specification: Fixed Capacitors ofGlass-Ceramic Dielectric, Class 2 Assessment LevelE

IECQ PQC 8 ISSUE 1 Semiconductor Optoelectronic Devices Blank DetailSpecification: Ambient or Case-Rated Photocouplerswith Phototransistor Output Assessment LevelCategories I, II or III

IECQ PQC 8/US 0001 ISSUE 1 Detail Specification for Use in ElectronicEquipment: Ambient Rated Photocoupler withPhototransistor Output Type LTV-4N35 AssessmentLevel Category I

IECQ PQC 8/US 0002 ISSUE 1 Detail Specification for Use in ElectronicEquipment: Ambient Rated Photocoupler withPhototransistor Output Type LTV-817 AssessmentLevel Category I

IECQ PQC 8/US 0003 ISSUE 1 Detail Specification for Use in ElectronicEquipment: Ambient Rated Photocoupler with


Phototransistor Output Type LTV-702V AssessmentLevel Category I

IECQ PQC 26 (WITHDRAWN) Switches for Use in ElectronicEquipment: Generic Specification: ElectromechanicalSwitches of Assessed Quality

IECQ PQC 27 (WITHDRAWN) Switches for Use in ElectronicEquipment: Sectional Specification: SensitiveSwitches of Assessed Quality

IECQ PQC 28 (WITHDRAWN) Switches for Use in ElectronicComponents: Sectional Specification: RotarySwitches of Assessed Quality

IECQ PQC 29 (WITHDRAWN) Switches for Use in ElectronicEquipment: Blank Detail Specification: Electromechanical Sensitive Switches of AssessedQuality

IECQ PQC 29/US 0001 Specification for Use in Electronic Equipment: Detail Specification: Basic Sensitive Switches

IECQ PQC 29/US 0002 Specification for Use in Electronic Equipment: Blank Detail Specification: Miniature SensitiveSwitches

IECQ PQC 29/US 0003 Specification for Use in Electronic Equipment: Detail Specification: Subminiature SensitiveSwitches

IECQ PQC 29/US 0004 Specification for Use in Electronic Equipment: Detail Specification: Sub-Subminiature SensitiveSwitches

IECQ PQC 30 (WITHDRAWN) Switches for Use in ElectronicEquipment: Blank Detail Specification: Electromechanical Rotary Switches of AssessedQuality

IECQ PQC 30/US 0001 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-CurrentRating) with Printed Circuit Mounting, Maximum 12Positions, 15 mm Maximum Width

IECQ PQC 30/US 0002 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-CurrentRating) with Central Mounting, Maximum 12Positions, 20 mm Maximum Width (English Shaft & Mounting Bushing)

IECQ PQC 30/US 0003 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-CurrentRating) with Central Mounting, Maximum 12Positions, 20 mm Maximum Width (Metric Shaft & Mounting Bushing)

IECQ PQC 30/US 0004 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-CurrentRating) with Printed Circuit Mounting, 12Positions, 23 mm Maximum Width (English Shaft & Mounting Bushing)

IECQ PQC 30/US 0005 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-CurrentRating) with Printed Circuit Mounting, 12Positions, 23 mm Maximum Width (Metric Shaft & Mounting Bushing)

IECQ PQC 30/US 0006 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-CurrentRating) with Central Mounting, Maximum 12Positions, 33 mm Maximum Width

IECQ PQC 30/US 0007 Switches for Use in Electrotechnical Equipment: Detail Specification: Rotary Switch (Low-CurrentRating) with Printed Circuit and Solder LugTerminations, Maximum 12 Positions, 15 mm MaximumWidth (Metric Shaft and Bushing)

IECQ PQC 31 Fixed Capacitors for Use in Electronic Equipment:


Sectional Specification: Fixed Tantalum ChipCapacitors with Solid Electrolyte

IECQ PQC 32 Fixed Capacitors for Use in Electronic Equipment: Blank Detail Specification: Fixed Tantalum ChipCapacitors, Assessment Level E

IECQ PQC 32/GB 0001 ISSUE C Fixed Tantalum Chip Capacitor IECQ PQC 32/GB 0002 ISSUE 1 Fixed Tantalum Chip Capacitor IECQ PQC 32/GB 0003 ISSUE 1 Fixed Tantalum Chip Capacitor IECQ PQC 35 (WITHDRAWN) Switches for Use in Electrotechnical

Equipment: Sectional Specification: PushbuttonSwitches of Assessed Quality

IECQ PQC 36 (WITHDRAWN) Switches for Use in ElectrotechnicalEquipment: Blank Detail Specification: Electromechanical Pushbutton Switches of AssessedQuality

IECQ PQC 36/US 0001 Switches for Use in Electrotechnical Equipment: Detail Specification: Pushbutton Switches ofAssessed Quality

IECQ PQC 36/US 0002 Switches for Use in Electrotechnical Equipment: Detail Specification: Pushbutton Switches ofAssessed Quality

IECQ PQC 36/US 0003 Switches for Use in Electrotechnical Equipment: Detail Specification: Miniature PushbuttonSwitches, Non- Illuminated, 11,5 mm x 16 mmMounting, 1 & 2 Poles, 6 Amperes

IECQ PQC 36/US 0004 Switches for Use in Electrotechnical Equipment: Detail Specification: Miniature PushbuttonSwitches, Illuminated and Non-Illuminated, 11,5 mmx 16 mm Mounting, 1 & 2 Poles, 1 Ampere

IECQ PQC 37 Switches for Use in Electrotechnical Equipment: Detail Specification: Keyboard Switches of AssessedQuality

IECQ PQC 38 Magnetic Cores of Magnetically Hard FerritesGeneric Specification

IECQ PQC 39/CS 0001 Detail Specification for Electronic ComponentsColour Television Picture Tube A59TMZ40X01

IECQ PQC 39/RU 0011 ISSUE 1 (WITHDRAWN) Colour Picture Tube 25LK2TS-1 IECQ PQC 39/RU 0012 ISSUE 1 (WITHDRAWN) Colour Picture Tubes 51Ohmk3u -C,

51OhmK3u -1C IECQ PQC 39/RU 0013 ISSUE 1 Electronic Equipment: Receiving Picture Tubes

A33LPE01X01, A33LPE02X01, A33LPEO3X01 IECQ PQC 39/RU 0014 Electronic Equipment: Receiving Picture Tubes

A57LPE0IX0I IECQ PQC 39/RU 0015 Electronic Equipment: Receiving Picture Tubes

A5ILPE02X0I, A5ILPE03X0I, A5ILPE04X0I, A5ILPE05X0I, A5ILPE06X0I, A5ILPE07X0I

IECQ PQC 39/RU 0016 IS 1 Electronic Equipment: Receiving Picture Tubes61LK5C-1

IECQ PQC 39/RU 0017 IS 1 Receiving Colour Picture Tubes A48LPEO1X01, A48LPEO2X01 (En)

IECQ PQC 39/SU 0002 (WITHDRAWN) Detail Specification for ElectronicComponents Receiving Picture Tube 31LK4B

IECQ PQC 39/SU 0004 (WITHDRAWN) Detail Specification for ElectronicComponents Receiving Picture Tube 6ILK3B, 6ILK4B

IECQ PQC 39/SU 0005 (WITHDRAWN) Detail Specification for ElectronicComponents Receiving Picture Tube 50LK2B

IECQ PQC 39/SU 0005 (WITHDRAWN) Detail Specification for ElectronicComponents Receiving Picture Tube "50cm 100Degree"; (Amendment 1-1993)

IECQ PQC 39/SU 0006 Detail Specification for Electronic ComponentsReceiving Picture Tube 6ILK5C-I Amendment -1992

IECQ PQC 39/SU 0007 (WITHDRAWN) Detail Specification for ElectronicComponents Receiving Picture Tube I6LK8B

IECQ PQC 39/SU 0008 (WITHDRAWN) Detail Specification for Electronic


Components Receiving Picture Tube 40LK12B IECQ PQC 39/SU 0009 (WITHDRAWN) Detail Specification for Electronic

Components Generator Tube GU-88A IECQ PQC 39/SU 0010 ISS 1 (WITHDRAWN) Detail Specification: Electron-Beam

Display Tube 31LM106 IECQ PQC 39/US 0001 ISS 1 Specifications for Use in Electrotechnical

Equipment: Detail Specification: Monochrome CathodeRay Tube for Alphanumeric/ Video Display

IECQ PQC 40 (WITHDRAWN) Switches for Use in ElectrotechnicalEquipment: Sectional Specification: In-LineSwitches of Assessed Quality

IECQ PQC 41 (WITHDRAWN) Switches for Use in ElectrotechnicalEquipment: Blank Detail Specification: Electromechanical In-Line Switches of AssessedQuality

IECQ PQC 41/US 0001 Specifications for Use in ElectrotechnicalEquipment: Detail Specification: Dual-in-LinePackage Switches, Raised and Recessed RockerActuated Amendment 1-1986

IECQ PQC 41/US 0002 Switches for Use in Electrotechnical Equipment: Detail Specification: Dual-in-Line Switches, Raisedand Recessed Slide Actuated Amendment 1-1986

IECQ PQC 41/US 0003 ISS 2 Switches for Use in Electrotechnical Equipment: Detail Specification: Dual-in-Line Package SwitchesSurface Mountable Slide Actuated

IECQ PQC 41/US 0004 Specifications for Use in ElectrotechnicalEquipment: Detail Specification: Dual-in-LinePackage Switches, Slide Actuated, MachineInsertable

IECQ PQC 41/US 0005 Switches for Use in Electrotechnical Equipment: Detail Specification: Dual-in-Line Package SwitchesRotary Actuation, Binary Output

IECQ PQC 41/US 0006 ISS 1 Switches for Use in Electrotechnical Equipment: Detail Specification: Dual-in-Line PackageSwitches, Side Toggle Actuated (PIANO Type)

IECQ PQC 46 Fixed Capacitors for Use in Electronic EquipmentSectional Specification: Fixed Mica Dielectricd.c. Capacitors

IECQ PQC 47 Fixed Capacitors for Use In Electronic EquipmentBlank Detail Specification: Fixed Mica Dielectricd.c. Capacitors Assessment Level E

IECQ PQC 47/IN 0001 Detail Specification : Fixed Mica Dielectric d.c. Capacitors Moulded Axial

IECQ PQC 47/IN 0002 Detail Specification : Fixed Mica Dielectric d.c. Capacitors Dipped Radial

IECQ PQC 50 (WITHDRAWN) Switches for Use in ElectrotechnicalEquipment: Sectional Specification: Rocker, Slide, and Toggle Switches of Assessed Quality

IECQ PQC 55 (WITHDRAWN) Switches for Use in ElectronicEquipment Blank Detail Specification: Electromechanical In-Line Switches of AssessedQuality; Assessment Level S

IECQ PQC 56 Generic Specification for: Piezoelectric CeramicFilters for Use in Electronic Equipment

IECQ PQC 57 Sectional Specification for: Piezoelectric CeramicFilters for FM Radios

IECQ PQC 58 Blank Detail Specification for: PiezoelectricCeramic Filters for Use in FM Radios AssessmentLevel E

IECQ PQC 58/JP 0001 Detail Specification for: Piezoelectric CeramicFilters for Use in FM Radios Assessment Level E

IECQ PQC 58/SG 0001 Detail Specification for: Piezoelectric CeramicFilters for Use in FM Radios Assessment Level E

IECQ PQC 59 Sectional Specification for: Piezoelectric Ceramic


Filters for AM Radios IECQ PQC 60 Blank Detail Specification for: Piezoelectric

Ceramic Filters for Use in AM Radios AssessmentLevel E

IECQ PQC 60/ JP 0001 Detail Specification for: Piezoelectric CeramicFilters for Use in AM Radios Assessment Level E

IECQ PQC 60/SG 0001 Detail Specification for: Piezoelectric CeramicFilters for Use in AM Radios Assessment Level E

IECQ PQC 61 Sectional Specification for: Piezoelectric CeramicFilters for Sound IF Circuit of Television

IECQ PQC 62 Blank Detail Specification for: PiezoelectricCeramic Filters for Sound IF Circuit of TVAssessment Level E

IECQ PQC 62/ JP 0001 Detail Specification for: Piezoelectric CeramicFilters for Sound IF Circuit of TV Assessment LevelE

IECQ PQC 62/ JP 0002 Piezoelectric Ceramic Filters for Sound IF Circuitof TV; Assessment Level E

IECQ PQC 63 Sectional Specification for: Piezoelectric CeramicFilters for Communication Equipment

IECQ PQC 64 Blank Detail Specification for: PiezoelectricCeramic Filters for Use in Communication EquipmentAssessment Level E

IECQ PQC 64/ JP 0001 Blank Detail Specification for: PiezoelectricCeramic Filters for Use in Communication EquipmentAssessment Level E

IECQ PQC 64/JP 0002 Detail Specification for: Piezoelectric CeramicFilters for Use in Communication EquipmentAssessment Level E

IECQ PQC 65 Generic Specification for: Piezoelectric CeramicResonators for Use in Electronic Equipment

IECQ PQC 66 Sectional Specification for: Piezoelectric CeramicResonators for Low-Frequency (LF)

IECQ PQC 67 Blank Detail Specification for: PiezoelectricCeramic Resonators for Low- Frequency (LF) Assessment Level E

IECQ PQC 67/ JP 0001 Detail Specification for: Piezoelectric CeramicResonators for Low- Frequency (LF) Assessment LevelE

IECQ PQC 67/SG 0001 Detail Specification for: Piezoelectric CeramicResonators for Low-Frequency (LF) Assessment LevelE

IECQ PQC 68 Sectional Specification for: Piezoelectric CeramicResonators for High-Frequency (HF)

IECQ PQC 69 Blank Detail Specification for: PiezoelectricCeramic Resonators for High- Frequency (HF) Assessment Level E

IECQ PQC 69/ JP 0001 Detail Specification for: Piezoelectric CeramicResonators for High- Frequency (HF) AssessmentLevel E

IECQ PQC 69/ JP 0002 Detail Specification for: Piezoelectric CeramicResonators for High- Frequency (HF) AssessmentLevel E

IECQ PQC 70 (WITHDRAWN) Switches for Use in ElectrotechnicalEquipment: Blank Detail Specification: Rocker, Slide and Toggle Switches of Assessed Quality

IECQ PQC 71 Radio Frequency Cables for Use in ElectrotechnicalEquipment: Generic Specification: Radio FrequencyCables of Assessed Quality

IECQ PQC 72 Radio Frequency Cables for Use in ElectrotechnicalEquipment: Sectional Specification: Radio FrequencyCables, Flexible, for Operation at a Maximum CenterConductor Temperature of 85 Degrees C

IECQ PQC 73 Radio Frequency Cables for Use in Electrotechnical


Equipment: Blank Detail Specification: FlexibleRadio Frequency Cables for Operation at a MaximumCenter Conductor Temperature of 85 Degrees CAssessment Level H

IECQ PQC 73/ US 0001 Radio Frequency Cables for Use in ElectrotechnicalEquipment: Detail Specification: Radio FrequencyCables, Flexible, for Operation at a Maximum CenterConductor Temperature of 85 Degrees C AssessmentLevel H

IECQ PQC 74 Radio Frequency Cables for Use in ElectrotechnicalEquipment: Blank Detail Specification: FlexibleRadio Frequency Cables for Operation at a MaximumCenter Conductor Temperature of 85 Degrees CAssessment Level U

IECQ PQC 74/ US 0001 Radio Frequency Cables for Use in ElectrotechnicalEquipment: Detail Specification: Radio FrequencyCables, Flexible, for Operation at a Maximum CenterConductor Temperature of 85 Degrees C AssessmentLevel U

IECQ PQC 75 (WITHDRAWN) Semiconductor Devices - DiscreteDevices - Rectifier Diodes Blank DetailSpecification: Rectifier Diodes (IncludingAvalanche Rectifier Diodes), Ambient and Case-Rated, Greater Than 100 A

IECQ PQC 76 Generic Specification for Surge Protective Devices IECQ PQC 77 Measuring and Testing Methods for Surge Protective

Devices IECQ PQC 78 Sectional Specification for Surge Protective Gas

Discharge Tubes IECQ PQC 79 Blank Detail Specification for Surge Protective Gas

Discharge Tubes IECQ PQC 82 Semiconductors for Use in Electronic Equipment:

Sectional Specification: Semiconductor IntegratedCircuits Excluding Hybrid Circuits

IECQ PQC 83 ISSUE 1.1 Generic Specification: Quartz Crystal Units for Usein Electronic Equipment

IECQ PQC 84 ISSUE 1.1 Blank Detail Specification: Quartz Crystal Unitsfor Use in Electronic Equipment

IECQ PQC 85 Fixed Capacitors for Use in Electronic Equipment: Sectional Specification: Fixed Chip Capacitors withThin Film Dielectric; Selection of Methods of Testand General Requirements

IECQ PQC 86 Fixed Capacitors for Use in Electronic Equipment: Blank Detail Specification: Fixed Chip Capacitorswith Thin Film Dielectric Assessment Level E

IECQ PQC 86/IL 0001 ISSUE C Fixed Chip Capacitors Thin Film Dielectric IECQ PQC 87/US 0001 ISSUE 1 Capacitors for Use in Electrotechnical

Equipment: Detail Specification: Fixed MetallizedPolyethylene- Terephthalate Film Dielectric ChipCapacitors for Direct Current-Encapsulated

IECQ PQC 88 Generic Specification Printed Boards IECQ PQC 89 Sectional Specification: Single and Double-Sided

Printed Boards with Plain Holes IECQ PQC 90 Sectional Specification: Single and Double-Sided

Printed Boards with Plated-Through Holes IECQ PQC 91 Sectional Specification: Multilayer Printed Boards IECQ PQC 92 Sectional Specification: Flexible Printed Boards

Without Through Connections IECQ PQC 93 Sectional Specification: Flexible Printed Boards

With Through Connections IECQ PQC 94 Capability Detail Specification: Single and Double-

Sided Printed Boards with Plain Holes IECQ PQC 95 Capability Detail Specification: Single and Double-

Sided Printed Boards with Plated- Through Holes


IECQ PQC 96 Capability Detail Specification: Multilayer PrintedBoards

IECQ PQC 96/JP 0001 Capability Detail Specification: Multilayer PrintedBoards (Six Layers, Base Material: Epoxy Glass249-2-12, Prepreg Epoxy Glass 249-3-1GF SurfaceFinish 1.5Au/Ni, Sn,SnPb)

IECQ PQC 96/JP 0002 Capability Detail Specification: Multilayer PrintedBoards (Twelve Layers, Base Material: Epoxy Glass249-2-12, Prepreg Epoxy Glass 249-3-1GF, SurfaceFinish: Bare Copper)

IECQ PQC 96/JP 0003 Capability Detail Specification: Multilayer PrintedBoards (Ten Layers, Base Material: Epoxy Glass249-2-12, Prepreg Epoxy Glass 249-3-1GF SurfaceFinish 1.5Au/ 3Ni, Sn, Sn-Pb, Cu)

IECQ PQC 97 Generic Specification for Colour Picture Tube withElectrostatic Focussing & ElectromagneticDeflection for Colour Television Receiver

IECQ PQC 98 Blank Detail Specification for Colour Picture TubeModel * Having * Cm. Diagonal With ElectrostaticFocussing & Electromagnetic Deflection Angle of * Degree for Colour Television Receiver

IECQ PQC 99 (WITHDRAWN) Semiconductor Devices- AnalogueIntegrated Circuits; Voltage Regulators; BlankDetail Specification: Voltage Regulators

IECQ PQC 99 Blank Detail Specification for: Voltage Regulators IECQ PQC 100 ISSUE 1 Electronic Tubes Part 1: Generic Specification IECQ PQC 101 ISSUE 1 Electronic Tubes Part 2: Sectional Specification

for Oscilloscope and Display Cathode-Ray Tubes IECQ PQC 102 ISSUE 1 Electronic Tubes Part 3: Blank Detail Specification

for Oscilloscope and Display Cathode -Ray Tubes IECQ PQC 103 Sectional Specification for: Fixed Metallized

Polystyrene Film Dielectric d.c. Capacitors IECQ PQC 104 Blank Detail Specification: Fixed Metallized

Polystyrene Film Dielectric d.c. CapacitorsAssessment Level E

IECQ PQC 105 Blank Detail Specification for Light EmittingDiodes, Light Emitting Diode Arrays

IECQ PQC 106 Generic Specification for: Custom-BuiltTransformers and Inductors

IECQ PQC 107 Sectional Specification for: Power Transformers (Capability Approval)

IECQ PQC 108 ISSUE 1 Electronic Tubes Part 4: Sectional Specificationfor Photomultipliers

IECQ PQC 109 ISSUE 1 Electronic Tubes Part 5: Blank Detail Specificationfor Photomultipliers

IECQ PQC 110 ISSUE 1 Electronic Tubes Part 6: Sectional Specificationfor Cathode-Ray Camera Tubes

IECQ PQC 111 ISSUE 1 Electronic Tubes Part 7-1: Blank DetailSpecification for Cathode-Ray Camera Tubes

IECQ PQC 112 ISSUE 1 Electronic Tubes Part 7-2: Blank DetailSpecification for Photoemissive Camera Tubes

IECQ PQC 113 ISSUE 1 Electronic Tubes Part 8: Sectional Specificationfor Character Display

IECQ PQC 114 ISSUE 1 Electronic Tubes Part 9: Blank Detail Specificationfor Character Display Assessment Level F

IECQ PQC 115 ISSUE 1 Electronic Tubes Part 10: Sectional Specificationfor Pulsed Thyratrons and Non-Resonance Dischargers

IECQ PQC 116 ISSUE 1 Electronic Tubes Part 11: Blank DetailSpecification for Pulsed Thyratrons and Non-Resonance Dischargers

IECQ PQC 117 ISSUE 1 Electronic Tubes Part 12: Sectional Specificationfor Gas-Discharge Character Displays

IECQ PQC 118 ISSUE 1 Electronic Tubes Part 13: Blank DetailSpecification for Gas-Discharge Character Display


IECQ PQC 119 ISSUE 1 Electronic Tubes Part 14: Sectional Specificationfor High-Intensity Gas-Discharge Sources of OpticalRadiation

IECQ PQC 120 ISSUE 1 Electronic Tubes Part 15: Blank DetailSpecification for High-Intensity Gas-DischargeSources of Optical Radiation

IECQ PQC 121 Cathode-Ray Tubes (Television Tubes and DisplayTubes) Generic Specification

IECQ PQC 122 Cathode-Ray Tubes (Television Tubes and DisplayTubes) Blank Detail Specification. Cathode-RayTubes (Color Television and Display Tubes). Assessment Level E

iec list

Documents

edition iec

edition electricity

edition information

iec yearbook world standards

edition corrigenda

information interchange

edition cen en

information handling