ieee embedded 2015_16

Call -9158547792

EMBEDDED

Contact: +91 9158547792. Email: [email protected], [email protected], www.candorminds.com

1

IEEE

20

15

- R

OB

OTI

CS

80

51

P

IC

AR

M7

CODE TITLE APPLICATION / DESCRIPTION

ROB01

Online High-Precision Probabilistic Localization of Robotic Fish Using Visual and Inertial Cues

Application: Seashore monitoring Description: In this paper, a wireless underwater fish robot system is designed for underwater mobile robot system. Here zigbee is used for controlling the robot.

ROB02

A Sensor-Based Dual-Arm Tele- Robotic System

Application: Humanoid Robot Description: This robot having the pick and place two arm robot .In the proposed system, interfacing the two arm robot with pic controller through the driver circuit. In this we using the MEMS sensor to control the robot action based on the hand signal.

ROB03

High-Speed Automated Manipulation of Micro objects Using a Two-Fingered Micro hand

Application: Super Droid Robot Description: This robot having the pick and place arm for pick small micro things. In the proposed system, interfacing the pick and place robot with micro controller through the driver circuit. The robot navigation and operations should be controlled by Zigbee technology and also RF remote communication

ROB04

Control of a Snake Robot for Ascending and Descending Steps

Application: Smart Surveillance Description: In this paper, we propose a new snake-like robot for surveillance. It can move in any direction by a proper combination of motor and relays. The mechanism constructed using DC motors; the motors are actuated by electro mechanical relays. By actuating the proper relays, the snake robot is made to move in narrow regions

ROB05

Occlusion-Based Cooperative Transport with a Swarm of Miniature Mobile Robots

Application: Swarm Robot Description : We propose a new transport robot to bush the load to certain goal using controller, LCD, TRANSPORT mobile robot, ultrasonic sensor. In the goal is set by RF. In the robot section whenever RF communicate it move to the certain distance and direction continuous, it detect the goal by ultrasonic sensor.

ROB06

Towards a New Modality- Independent Interface For a Robotic Wheelchair

Application: Swarm Robot IDescription: In this project micro controller connected to MEMS, motion detection, eye blink Sip and 2 axis robot. In this project we are implement to help the disabled persons .Motion detection sensor used for detect the head motion. Eye blink sensor used to detect the no of blinks.

ROB07

Human-Like Motion Generation and Control for Humanoid's Dual Arm Object Manipulation

Application: Super Droid Robot Description : In this project micro controller connected to MEMS, motion detection, Two arm motion robot. In this project the robot acts as human like movements. Motion detection sensor used for detect the human motion the robot move forward or backward operations.

ROB08

Robot Guided Crowd Evacuation Application: Swarm Robot Description: In this project microcontroller connected to PIR Sensor and direction robot. In this project based on the people crowd the robot guide the people in auditorium which room is free to allocate the people. In this project 4 PIR sensor is used to represent the entrance and three room in the auditorium.

ROB09

Bio-inspired Group Modeling and Analysis for Intruder Detection in Mobile Sensor/Robotic Networks

Application: Mobile Robot Description: Concept of this project is detecting the intruder in the restricted area and if he violates it. Using this system, we watching the intruder through the web camera, it is continuously monitored in PC. These images are captured by image processing through MATLAB. If the unauthorized code received from robot section

Call -9158547792

EMBEDDED


2

IEEE

20

15

- R

OB

OTI

CS

80

51

P

IC A

RM

7

IEEE

20

15

- A

uto

mat

ion

8

05

1

PIC

A

RM

7


ROB10

Efficient Road Detection and Tracking for Unmanned Aerial Vehicle

Application: Automation Description: The paper presents the real time embedded implementation of this mapping system on a small Unmanned Ground Vehicle (UGV) to support real time obstacle avoidance. The UGV is controlled by using a RF remote, according to the command from the RF remote the UGV can navigate in the ground.

ROB11

A Robust Real-Time Vision System for Autonomous Cargo Transfer by an Unmanned Helicopter

Application: Machine vision Description: In order to reduce the complexity of the helicopter control, this paper constructs an flight control platform for a small micro helicopter, which is convenient for load carrying from one place to another place. The coaxial helicopter controlled from the control section using wireless communication

ROB12

An Ultrasonic and Vision-Based Relative Positioning Sensor for Multi robot Localization

Application: Machine vision Description: Concept of this project is to align the robot at particular distance and particular direction. In this project we use pic controller, zigbee, ultrasonic sonic sensor, LCD and robot mechanism. In this project based on the values from the ultrasonic and IR sensor the robot is align at particular area without any collision between the robot.

ROB13

Artificial Co-Drivers as a Universal Enabling Technology for Future Intelligent Vehicles and Transportation Systems

Application: Automation Description: In this project using PIC controller to monitor and control the behavior of vehicle unit using break sensor, and ultrasonic sensor using zigbee. In this we are going to avoid the accident in rash driving.

ROB14

Robust Control of a Miniature Ducted-Fan Aerial Robot for Blind Navigation in Unknown Populated Environments

Application: Domestic Robot Description: In this project using controller and ARM to monitor and control the behavior of vehicle unit using PIR sensor, and ultrasonic sensor using CAN communication protocol. In this we are going to avoid the accident and automatic route to the vehicle unit.

ROB15

Effects of Vibrotactile Feedback on Human Learning of Arm Motions

Application: Super Droid Robot Description: In this project microcontroller, pick and place robot, APR voice and keypad are used. In this project the robot is used to teach the humans. Based on the input from the keypad the robot hand write the particular character or numbers with also voice. We can give input from keypad

AM01

Primary-Side Power Flow Control of Wireless Power Transfer for Electric Vehicle Charging

Application: Energy management Description: In proposed system we are using micro controller which is interface with 2-axis robot and LCD. Here we are used wireless transmitter which is transfer the supply from one node to another node. Vehicle section itself receiver module will be present.

AM02

On Curve Negotiation: From Driver

Support to Automation Application: Automation Description: In proposed system we are using micro controller which is interface with DC motor and LCD. Here matlab input is given to the controller. Matlab part is used to getting the curve path condition.

AM03

Energy Exchange Between Electric Vehicle Load andWind Generating Utilities

Application: Energy management Description: In proposed system we are using micro controller which is interface with dc motor and LCD. Vehicle getting supply battery which is charge from renewable source(wind). Vehicle control through switches

Call -9158547792

EMBEDDED


3


AM04

Multi objective Vehicle Routing Problems With Simultaneous Delivery and Pickup

Application: Ambient Intelligence Description: In proposed system we are using PIC16f887a which is interface zigbee and ultra sonic sensor. Zigbee used to giving the input for vehicle road path direction. Ultra sonic sensor is used to detect the obstacles and distance

AM05

Diffraction-Compensating Coded Aperture for Inspection in Manufacturing (PIPE CRAWLING)

Application: Power plant Industries Description: The proposed system uses the microcontroller. The robot controlling part fully based on wireless protocol Zigbee. Using from PC we are giving the commands for robot operating purpose.

AM06

Energy-Efficient Control Strategies for Machine Tools With Stochastic Arrivals

Application: Energy management Description: To attain our concept need to use controller, voltage sensor, current sensor, speed sensor, LCD and induction motor. Speed value is obtained from speed Sensor. Voltage and current sensor are also interfaced with the microcontroller. Based on the sensor values power, efficiency, torque also calculated. Calculated values are sends to

AM07

An Automated Test Generation Technique for Software Quality Assurance

Application: Automation Description: In the proposed system at the very first the farmer information is noted down. The microcontroller is attached with a RFID reader. Each farmer is given an RFID card for unique identification.

AM08

Path-Constrained Motion Analysis: An Algorithm to Understand Human Performance on Hydraulic Manipulators

Application: Super droid Robot Description: In the proposed system, JCB will controlled by wireless communication. Zigbee is used for sharing the information with the speed of 2.4GHz. This is the fast communication for performing the particular operation.

AM09

A Practical Wireless Attack on the Connected Car and Security Protocol for In-Vehicle CAN

Application: Automobile Industries Description: In the proposed system whenever the vehicle is started, a msg with the GPS coordinate of the location of the vehicle is sent as an SMS to the owner's number. On receiving the message the owner can send a reply to lock or antilock that is stop the vehicle or allow the vehicle to run.

AM10

Central Electric-Motoring-Assisted Handling Control System for Electrified Vehicles

Application: Energy Management Description: In the proposed system we are interface speed sensor, keypad, GSM and Bluetooth with micro controller. Here vehicle speed control through 4 modes. Selection key used to select the mode. Such as 1.keypad mode, 2. GSM mode , 3.Blutooth mode and 4.sensor mode

AM11

Detection of U.S. Traffic Signs Application: Ambient Intelligence Description: In this project we are discussing about automatic detection of U.S. traffic signs. The watching of Traffic sign is necessity during in the driving. But they fail to watch the sign this causes fine paying are occur to driver, it is avoid by developing automatic detection system. The camera is used to capture the image of traffic sign then it gives to image

AM12

Designing Steering Feel for Steer-by- Wire Vehicles Using Objective Measures

Application: Ambient Intelligence Description: In this project grip sensor interface with pic controller and covered with steering. which is used to monitoring the grip of the vehicle steering. If driver is not properly hold the steering, speaker will intimating to driver.

IEEE

20

15

- A

uto

mat

ion

8

05

1

PIC

A

RM

7

Call -9158547792

EMBEDDED


4


IEEE

20

15

- A

uto

mat

ion

8

05

1

PIC

A

RM

7

AM13

Wireless Sensor Networks for Condition Monitoringin the Railway Industry: A Survey

Application: Super droid Robot Description: This system involves the design of crack finding robot for finding cracks in railway tracks. Here the microcontroller is interfaced with Robot, Zigbee, GPS, LCD and crack sensor

AM14

Integrated Indoor Navigation System for Ground Vehicles With Automatic 3-D Alignment and Position Initialization

Application: Automobiles Industries Description: The proposed system utilizes RFID based localization without using GPS receiver. The RFID tags are patched in floor in each zone and the robot has the RFID reader connected to it. Whenever the RFID reader nears a tag, it reads the data from the tag. According to the data received from tag,

AM15

Constrained Global Path Optimization for Articulated Steering Vehicles

Application: Swarm Robot Description: This article proposes a new, efficient path-planning algorithm for articulated steering vehicles operating in semi structured environments, in which obstacles are detected by the vehicle's sensors.

WI01

Implementation of a Wireless ECG Acquisition SoCfor IEEE 802.15.4 (ZigBee) Applications

Application: Bio-Gadgets Description: This paper presents a wireless biosignal acquisition system-on-a-chip specialized for ECG monitoring. The proposed system consists of three subsystems, namely, 1) the ECG acquisition node, 2) the protocol for standard ZigBee system, and 3) the RF transmitter circuits.

IEEE

20

15

- W

ire

less

8

05

1

PIC

A

RM

7

WI02

A Zigbee-Based Animal Health Monitoring System

Application: Smart Monitoring Description: An animal health monitoring system for monitoring the physiological parameters, such as rumination, body temperature, and heart rate with surrounding temperature and humidity. The developed system can also analyze the stress level corresponding to thermal humidity index.

WI03

Design and Application of a VOC- Monitoring System Based on a ZigBee Wireless Sensor Network

Application: Smart Monitoring Description: The primary aim of this paper is to design a low-power ZigBee sensor network and inter node data reception control framework to use in the real-time acquisition and communication of data concerning air pollutant levels from VOCs. The design is based on the microcontroller and ZigBee module,

WI04

Charging Time Characterization for Wireless RF Energy Transfer

Application: Energy Management Description: Wireless energy transfer to the onboard energy storage element using dedicated RF energy source has the potential to provide sustained network operations by recharging the sensor nodes on demand. Different from classical capacitor-charging operation, the incident RF waves provide constant power to the storage element,

WI05

Real-time Fire Detection for Video Surveillance Applications using a Combination of Experts based on Color, Shape and Motion

Application: Image Processing Description: In this paper, we propose a method that is able to detect fires by analyzing videos acquired by surveillance cameras. Two main novelties have been introduced. First, complementary information, based on color, shape variation, and motion analysis, is combined by a multi expert system. Second,

WI06

C-Band SAR Backscatter Evaluation of 2008 Gallipoli Forest Fire

Application: Green House Description: In this Paper, C-band VV polarization synthetic aperture radar (SAR) backscatter response to a forest fire was evaluated against burn severity estimated by the Land sat difference Normalized Burn Ratio products. Temporal evaluation of backscatter change with respect to various pre- and post fire conditions showed a noticeable sensitivity

Call -9158547792

EMBEDDED


5


IEEE

20

15

- W

irel

ess

8

05

1

PIC

A

RM

7

WI07

ZigBee-Based Communication System for Data Transfer Within Future Microgrids

Application: Energy Management Description: A wireless data communication system for future micro grids is presented in this paper. It is assumed that each MG has a central controller and each distributed generation unit in the MG has a local controller. The communication system is responsible for transmitting and receiving data amongst these controllers.

WI08

A Blind Zone Alert System Based on Intra-Vehicular Wireless Sensor Networks

Application: Automation Description: Due to the increasing number of sensors deployed in modern vehicles, intra-vehicular wireless sensor networks have recently received a lot of attention in the automotive industry, as they can reduce the amount of wiring harness inside a vehicle. By removing the wires, car manufacturers can reduce the weight of a vehicle

WI09

Wireless Power Transfer for Electric Vehicle Applications

Application: Energy Management Description: This paper reviewed the technologies in the WPT area applicable to EV wireless charging. By introducing WPT in EVs, the obstacles of charging time, range, and cost can be easily mitigated. Battery technology is no longer relevant in the mass market penetration of EVs. It is hoped that researchers could be encouraged by the state-of-

WI10

Investigating Wireless Charging and Mobility of Electric Vehicles on Electricity Market

Application: Automobile Industries Description: In this paper, we study a critical yet open problem for this application, i.e., the impact of wireless charging and mobility of EVs on the wholesale electricity market based on locational marginal price which is mainly determined by the EV mobility patterns.

WI11

A Low Cost, Highly Scalable Wireless Sensor Network Solution to Achieve Smart LED Light Control for Green Buildings

Application: Greenhouse Description: This paper proposes a low cost, wireless, easy to install, adaptable, and smart LED lighting system to automatically adjust the light intensity to save energy and maintaining user satisfaction. The system combines motion sensors and light sensors in a low-power wireless solution using Zigbee communication.

WI12

A Low-Power Wireless Sensor for Online Ambient Monitoring

Application: IOT Description: This paper presents the development of a compact battery-powered system that monitors the carbon dioxide level, temperature, relative humidity, absolute pressure, and intensity of light in indoor spaces, and that sends the measurement data using the existent wireless infrastructure based on the zigbee standards.

WI13

Passive and Semi-Passive Wireless Temperature and Humidity Sensors Based on EPC Generation-2 UHF Protocol

Application: Smart Monitoring Description: This paper proposes passive and semi-passive wireless temperature and humidity sensors based on electronic product code global Class-1 Generation-2 UHF communication protocol. The wireless sensors consist of a sensor key chip and off-chip temperature and humidity sensors.

WI14

An Approach of Reliable Data Transmission With Random Redundancy for Wireless Sensors in Structural Health Monitoring

Application: Bio-Gadgets Description: The proposed method includes two coding stages: 1) a source coding stage to compress the natural redundant information inherent in SHM signals and 2) a redundant coding stage to inject artificial redundancy into wireless transmission to enhance the transmission reliability.

WI15

Wireless Resource Allocation in Next Generation Healthcare Facilities

Application: Bio Security Description: Healthcare facilities with intelligent wireless devices can reduce the workload of the paramedic staff. These devices include low- power wireless sensors, personal wireless hub, and receivers. The PWH can act as a relay in the hospital network.

Call -9158547792

EMBEDDED


6


IEEE

20

15

- G

SM &

GP

S

80

51

P

IC

AR

M7

GP01

Understanding Taxi Service Strategies From Taxi GPS Traces

Application: Ambient Intelligence Description: In this proposed system, we are going to design an automatic call taxi booking system using GSM technology. This system automatically sends the booking status as a SMS (Short message service)

GP02

Real-Time GPS Precise Point Positioning-BasedPerceptible Water Vapor Estimation forRainfall Monitoring and Forecasting

Application: Green Machine Description: In our project we estimate weather condition with location by using pic16f877a controller, GPS, GSM, and humidity sensor.

GP03

Traffic Sensing Through MATLAB Application: Image Processing Description: In this system we estimate the traffic level before entering the traffic section by using ARM controller MATLAB, GPS and Zigbee. The camera is used to capture the image in traffic section by using MATLAB

GP04

Implementing Intelligent Traffic Control System forCongestion Control, Ambulance Clearance,And Stolen Vehicle Detection

Application: Smart Surveillance Description: In the proposed system to improve the existing system a new Green wave system is developed. In which the traffic signal management for emergency vehicle is include. To make the proposed system to work, each and every vehicle going for registration is provided with a RFID tag

GP05

Energy-Efficient Models of Sustainable Location for vehicle Inspection Station with Emission Constraints

Application: Automotive Description: In our project we detect the vehicle which is pollute our atmosphere for that we use controller,CO2 sensor ,GPS and GSM

GP06

Energy-Efficient Real-Time Human Mobility State Classification Using Smart phones

Application: Energy management Description: In this proposed system, the exact location of the moving person is get by using MEMS technology. Here MEMS accelerometer, GPS, GSM are interfaced with 8051 microcontroller.

GP07

Sensed: Sensing Driving Conditions to Estimate Vehicle Speed in Urban Environments

Application: Automotive Description: In our proposed system we estimate vehicle speed in urban environment and also if accident is occur then send the vehicle information to the hospital. This process is achieved by using PIC16F877A controller, GSM, GPS, speed sensor, vibration sensor, and driver circuit, motor.

GP08

Automatic detection and notification of potholes and humps on roads to aid drivers

Application: Ambient Intelligence Description: In our proposed system we detect the pothole in the roads by using PIC16F877A microcontroller, ultrasonic sensor, GPS, GSM, and APR IC.

GP09

A Smart Phone-Based Pocket Fall AccidentDetection, Positioning, and Rescue System

Application: Bio-Gadgets Description: In our project we make the system for elder people by using the micro controller, MEMS accelerometer, GPS and GSM. Sensor is used to find out the fall detection

Call -9158547792

EMBEDDED


7


GP10

A Methodology for Denoising and Generating Bus Infrastructure Data

Application: Automotive Description: In our project bus stop itself we find where our required bus present now, by using arm controller, voice recognition kit, GPS and GSM. Our required bus number is we intimate to the controller using voice recognition kit

GP11

Miniature Folded Patch GPS Antenna for Vehicle Communication Devices

Application: Automobile Industries Description: In our proposed system is used for travels because in tours and travels section we have number of keys each key for some particular vehicle.

GP12

Road-Network Aware Trajectory Clustering: Integrating Locality, Flow, and Density

Application: Domestic Description: To attain our concept need to use microcontroller, camera, GSM, pc and LCD. Camera is used to capture the image of the traffic, with the help of MATLAB controller estimate the traffic level.

GP13

A Compressive Sensing Approach to Describe Indoor Scenes for Blind People

Application: Machine Vision Description: In this project we are discussing about compressive sensing approach to describe Indoor scenes for blind people. The camera is used to capture the object and images are processed via image processing and after that APR voice process intimates what type object are in there.

GP14

Indoor Tracking: Theory, Methods, and Technologies

Application: Machine Vision Description: In this project we are discussing about indoor tracking system. It generally tracks the humans inside the shopping complex by innovative method. This method consists of RFID technology, before entering in the complex each tag is assigned for each persons.

GP15

Fall Detection Based on Body Part Tracking

Application: Bio-Gadgets Description: In our project we detect the fall based on body tracking by using microcontroller, patient fall detection sensor, GPS and GSM. Whenever the elder people are fall that is detected by fall sensor and give the input to the controller and alarm is switch ON.

CE01

Synergistic Change Detection and Tracking

Application: Defense Description: In the proposed system the detection of culprits in the defense can be made easy. As the term 'Synergistic' means combining of two parameters so that efficiency to be improved. So in the proposed system matlab and embedded are combined to implement

CE02

Unknown Tag Identification in Large RFID Systems: An Efficient and Complete Solution

Application: Defense Description: In the proposed system it is mainly used in the shopping malls. In shopping malls particular place is allocated for particular object. Also for every object we include RFID. Whenever we scan the object it automatically indicates where we want to place that particular objects by the PC using ZIGBEE.

CE03

Global Sensor Deployment and Local Coverage-Aware Recovery Schemes for Smart Environments

Application: Ambient intelligence Description: In the proposed system it is mainly used for waste management. . In this system at the dustbin level sensor(to sense the dust level in the dustbin), Temperature sensor(to find temperature), gas sensor(if any dangerous gases are evolving) can be used.

IEEE

20

15

- C

on

sum

er E

lect

ron

ics

80

51

P

IC A

RM

7

80

51

P

IC

AR

M7

IE

EE 2

01

5 -

GSM

& G

PS

Call -9158547792

EMBEDDED


8


CE04

Use of an Inertial/Magnetic Sensor Module for Pedestrian Tracking During Normal Walking

Application: Smart surveillance Description: In proposed system, the MEMS and Foot sensor are connected together in the foot wear. These sensors are connected with the microcontroller which sends value via Zigbee module.

CE05

Integration of MEMS Inertial and Pressure Sensors for Vertical Trajectory Determination

Application: Automotive Description: In the proposed system we can find the vertical height at which we present. The pressure sensor senses the pressure of object in the space. The gyroscope and accelerometer determines the exact spot of the person or object in the space in 3-D view

CE06

PRLS-INVES: A General Experimental InvestigationStrategy for High Accuracy and Precision in Passive RFID Location Systems

Application: Smart surveillance Description: In proposed system it is easy to identify particular spot without disturbing others. In this system every place is assigned with a RFID tag. The blind people are given RFID reader, so as to get updates of the particular place.

CE07

Accurate and Efficient Object Tracking based on Passive RFID

Application: Smart surveillance Description: In this project the airport luggage handling is totally automatic. The RFID technology is used for luggage management. In the luggage section before loading the luggage's each luggage's RFID is stored in the microcontroller and send it to the Flight section.

CE08

Proximity Sensing Based on a Dynamic Vision Sensor for Mobile Devices

Application: Ambient intelligence Description: The system integrates a camera, a microphone, a computer, and a speaker for audio description of clothing patterns and colors. The blind person has to tell the desired cloth color in the Mic. A camera is used to capture clothing images

CE09

A Rule-based Service Customization Strategy for Smart Home Context- aware Automation

Application: Smart home Description: In the proposed system the automation plays a vital role. With this automation system user can easily perform home automation.

CE10

Exploiting Passive RFID Technology for Activity Recognition in Smart Homes

Application: Automation Description: In proposed system the RFID technology is used to find the object location. Hence by using RFID technology along with the voice it is easy to identify the object

BIO1

PSMPA: Patient Self-Controllable and Multi-Level Privacy-Preserving Cooperative Authentication in Distributed m-Healthcare Cloud Computing System

Application: Bio-Gadgets Description: A physiological measurement platform is proposed for enabling users to measure physical condition regularly and to maintain good physical condition. The oxygen saturation is clipped in the finger of the person. The ECG Sensor and BP are also fixed in the fore arms or wrist of that person.

BIO2

An Implantable RFID Sensor Tag toward Continuous Glucose Monitoring

Application: Bio-Gadgets Description: In this system, we report an exploration of the Self Health Management system. The RFID technology used to monitor the glucose level of a person. In this the project we are using the self power RFID based glucose sensor strip is placed into the person body

IEEE

20

15

- B

IO M

EDIC

AL

80

51

P

IC A

RM

7

IEEE

20

15

- C

on

sum

er E

lect

ron

ic

80

51

P

IC

AR

M7

Call -9158547792

EMBEDDED


9

IEEE

20

15

- B

IO M

EDIC

AL

80

51

P

IC

AR

M7


BIO03

Self-Powered Monitoring of Repeated Head Impacts Using Time- Dilation Energy Measurement Circuit

Application: Biometric Sensor Description: In this system, we are going to monitor the sport person physical parameters like head impact, respiration level and energy level in their body using PIC Controller. If any parameter level will reach the threshold limit.

BIO04

Current and Future Challenges in Point-of-Care Technologies: A Paradigm-Shift in Affordable Global Healthcare With Personalized and Preventive Medicine

Application: Health Care Management Description: In this system, we report the design and development of a wireless sensor network for biomedical application. The human machine interface algorithm is used here to design a medical box which is very helpful for the patients

BIO05

Intelligent Disease Self-Management with Mobile Technology

Application: Bio-Gadgets Description: In this system, we report an exploration of utilizing latest technique to monitor the Blood Pressure, glucose, pulse and temperature of a person. We are using Blood Pressure sensor which is interfaced with the Microcontroller

BIO06

Smartphone-Centric Ambient Assisted Living Platform for Patients Suffering from Co-Morbidities Monitoring

Application: Ambient Intelligence Description: In this system, we are going to monitor the coma patient using pic microcontroller. The eye blink and motion sensor used to monitor the eye blink and movement of the coma patient and intimate to monitor section using zigbee.. The data are displayed in the LCD and if any abnormal occurs then alert signal

BIO07

An Analysis of RFID Authentication Schemes for Internet of Things in Healthcare Environment Using Elliptic Curve Cryptography

Application: Bio Security Description: In this system, we report an exploration of the Self Health Management system. The RFID technology used here to store the data's of a person. The Weight, glucose, BP and Temperature of a person have been stored in the controller based on the database

BIO08

A Precise RFID Indoor Localization System with Sensor Network Assistance

Application: Smart home Description: In the proposed system, patient will always hold the RF tags. For example, if the patient is in the scanning room the RF reader inside the room reads the tags of the patient and sends the location to the PC through the ZIGBEE transmitter

BIO09

Real-Time Closed-Loop Control of Human Heart Rate and Blood Pressure

Application: Smart monitoring Description: In this system, we use the heart rate and blood pressure sensors are attached with the patient who rest on the bed. During the Prolonged bed rest has significant negative impacts on the human body, particularly on the cardiovascular system (i.e. Change in the blood pressure and heart rate).

BIO10

Evaluation of Pressure Bed Sensor for Automatic SAHS Screening

Application: Ambient Intelligence Description: The proposed system is a pressure bed sensor (PBS) that incorporates multiple pressure sensors into a bed mattress to measure several physiological signals of the sleeping subject: respiration; heart rate; and body movements. The recordings of the sensor readings suspected problems are analyzed and if abnormal is present it will

BIO11

The Development of a Blood Leakage Monitoring System for the Applications in Hemo dialysis Therapy

Application: Health care Management Description: In this system, breathe sensor and heart rate sensor are attached with the each person's body and the pressure sensor is placed on the persons bed mattress. The continuous monitoring of the three sensor readings we can get the three different levels of readings by analyzing the readings of the patient.

Call -9158547792

EMBEDDED


10

IEEE

20

15

- B

IO M

EDIC

AL

80

51

P

IC

AR

M7


BIO12

System Architecture for Low-Power Ubiquitously Connected Remote Health Monitoring Applications With Smart Transmission Mechanism

Application: Energy Management Description: In this system, we are going to monitor health condition of human with less power. The Blood pressure sensor, Glucose sensor, ECG, Heartbeat sensor and temperature sensor are used monitor the health status of a patient.

BIO13

Automated Detection of Sleep Apnea and Hypopnea Events Based on Robust Airflow Envelope Tracking in the Presence of Breathing Artifacts

Application: Bio Gadgets Description: n this system, breathe sensor and heart rate sensor are attached with the each person's body and along with the pressure sensor. By continuous monitoring of the three sensor readings and by analyzing the readings of the patient we can information regarding the respiratory problem.

BIO14

Behavior Rule Specification-Based Intrusion Detection for Safety Critical Medical Cyber Physical Systems

Application: Biometric Security Description: In this system, we use the temperature sensor, pressure sensor, breathe sensor, pulse sensor are attached with the patient. The sensor will continuously send the readings to the microcontroller. Whenever the readings are to be varied the microcontroller will activate the alert system

BIO15

A Semantically Enriched Clinical Guideline Model Enabling Deployment in Heterogeneous Healthcare Environments

Application: Health care Management Description: This paper presents a system that can be used to monitor the hospital environment . The temperature sensor is used to monitor the temperature, humidity sensor is used to measure cooling level, gas sensor is used to measure the any abnormal odour in surrounding, level sensor is used to measure the level of dust pin and color sensor is used

ROS01

An Assistive Navigation Framework for the Visually Impaired

Application: Consumer applications Description: In this proposed system, facilities like detection of any obstacles, whether the detected obstacle is a stationary or a moving object, then arrival of any bus, the traffic signal indication are provided to the visually challenged people continuously using a voice recording and play back module

IEEE

20

15

- R

EAL

TIM

E O

PER

ATIN

G S

YSTE

M (

RTO

S)

ROS02

Integrated Sensing Systems and Algorithms for Solid Waste Bin State Management Automation

Application: Green house Description: In the proposed system it is mainly used for waste management. Basically in a city there are number of dustbins. It is very difficult for the corporation to monitor and clean every dustbin. So to overcome this problem our project can be implemented

ROS03

Performance Analysis and Modeling ofSoil Moisture of Irrigation Crop land

Application: Agriculture Description: In the proposed system we need to manage irrigation system by checking the soil moisture in field using RTC(real time clock) is used for scheduling power to a distribution network. Current sensor is used for protect the device from damages and maintain the soil moistureness

ROS04

Automated Health Alerts Using In- Home Sensor Data for Embedded Health Assessment

Application: Bio-medical Description: In this system, we report an exploration of utilizing latest technique to monitor the Blood Pressure , glucose , pulse and temperature of a person. While monitoring there is any abnormal condition is happened the system will send the message to the appropriate persons that should be the doctor also

ROS05

Noninvasive Monitoring Device to Evaluate Sleep Quality at Mining Facilities

Application: Security alert System Description: In this system, breathe sensor and heart rate sensor are attached with the each person’s body and along with the pressure sensor. By continuous monitoring of the three sensor readings and by analyzing the readings of the patient we can information regarding the respiratory problem.

Call -9158547792

EMBEDDED


11

IEEE

20

15

- R

EAL

TIM

E O

PER

ATI

NG

SYS

TEM

(R

TOS)


ROS06

Minimizing the Disruption of Traffic Flow of Automated Vehicles During Lane Changes

Application: Automation Description: Here we are proposingsensor based vehicle counting, type and speed of the vehicle The monitored data is send to control section and data’s are stored

ROS07

Recommendations Supporting Situation Awareness in Partially Automated Driver Assistance Systems

Application: Automation Description: In this project Automated Traffic avoidance of traffic and major accident in the crowded area and emergency section. RF is used to speed limit Zigbee is used on communication

ROS08

An Advanced Home Energy Management System Facilitated by Nonintrusive Load Monitoring With Automated Multiobjective Power Scheduling

Application: Power management Description: Here current sensor is used for protect the devices from faults like 1.over voltages 2.under voltage. If any one of the above problem happens the device is automatically share or switch off the device. Controller status and everything is displayed in LCD.

ROS09

GPRS based Local Coverage-Aware Recovery Schemes for Smart Environments

Application: Green house Description: This paper presents a system that can be used to monitor the landslide in particular areas. The micro controller is connected with four types of sensors called as rain gauge sensor, gas sensor, fire sensor and mems sensor

ROS10

Optimal Smart Home Energy Management Considering Energy Saving and a Comfortable Lifestyle

Application: Smart home Description: In this paper, a multi objective mixed integer nonlinear programming model is developed for optimal energy use in a smart home, considering a meaningful balance between energy saving and a comfortable lifestyle.

ROS11

Detection of Localized Bearing Faults in Induction Machines by Spectral Kurtosis and Envelope Analysis of Stator Current

Application: Production industry Description: In this paper, a wireless monitoring system forthree phase induction motor is realized using Zigbeeprotocol, where wired communication is either moreexpensive or impossible due to physical conditions andhuman hazards for safe and economic datacommunication in industrial fields.

ROS12

An optimization of low cost and high efficient comorbidities patient monitor

Application: Bio-medical Description: This paper illustrates the design and implementation of an e-health monitoring networked system. The architecture for this system is based on smart devices and wireless sensor networks for real time analysis of various parameters of patients

ROS13

Global health care for self-assistive medibox and preventive medicine

Application: Bio-medical Description: This paper presents a summary of discussions that took place during the keynote presentations, panel discussions, and breakout sessions on needs, challenges, and technology innovations in POC technologies toward improving global healthcare.

EM01

Three Dimensional Conveyer With Integrated Electrostatic Actuators

Application: Smart Industry Description: In this system human power is not used therefore error is less also required low time with provides highest security and greatest flexibility. It is a reliable system compared to existing system.

IEEE

20

15

-

MEC

HA

NIS

M

Call -9158547792

EMBEDDED


12


IEEE

20

15

- M

ECH

AN

ISM

EM02

The Amphibious Vehicle For Sea And Seashore Monitoring

Application: Smart Surveillance Description: In proposed system, vehicle which can run on both water and soil.It can be used in navy security systems amphibious vehicle is controlled via Bluetooth and water level sensor is used here tells whether vehicle is going in water or in the soil.

EM03

Voice Based Control And Monitor Of Intelligent Gear Mechanism

Application: Automobile Industries Description: In the proposed system the automatic gear system is controlled through voice. This gear system is controlled by using 8051 . In the exist system manual gear is present .In proposed , we can change the gear by automatic with help of voice .

EM04

High Reliable Glass Cleaning Robot Servant For Software Company

Application: Domestic Robot Description: In the proposed system the automatic glass cleaning robot is controlled wirelessly through Zigbee. The proposed system uses the AT89C51 microcontroller. The robot controlling part fully based on wireless protocol Zigbee. Using from PC we are giving the commands for robot operating purpose.

EM05

Intelligent And High Efficient Car Parking In Shopping Mall

Application: Automation Description: This system is mainly used to find the parking place for the car. The IR sensors are used to sense weather the car is present or not. The IR sensor continuously sends IR signals. If the IR signal received means the car is not present & in that place we can park the car

EM06

Self-Analysis And Control Of Alcohol Detection System In Vehicles

Application: Security System Description : In this system human power is not used therefore error is less also

required low space with provides highest security and greatest flexibility. No need for energy intensive ventilating system It consists of one main display at the ground floor which is basically counter that displays number of cars in each floor. In each slot consist IR sensor which indicate that parking space is available or not on that particular slots.

EM07

A Probabilistic Approach To High- Confidence Coconut Climbing Robot

Application: Agriculture Robot Idescription: In the proposed system automatic coconut mechanism is present.Completely automatic The proposed system uses the AT89C51 microcontroller. The robot controlling part fully based on wireless protocol Zigbee. Using from PC we are giving the commands for robot operating purpose

EM08

Optimal Mechanism Design OfShoe Polishing Machine

Application: Super Droid Robot Description : In proposed system, we develop the machine which is used to polish the shoe It can be used in public and private sectors

EM09

Hand-Motion Crane Control Using Radio Frequency Real-Time Location Systems

Application: Ambient Intelligence Description: In this project, we are going to control the robot using Zigbee technology. Inputs are getting from the touch screen and MEMS sensor. This paper presents a new type of interface that allows operators to drive a crane by simply moving a hand-held device

EM10

Research On The Oil TankOil Dissipation System

Application: Automobile Industry Description: This system is mainly used in finding oils in the vehicle industry. By using viscosity sensor we are finding about the oils. If the oil is perfect then by using driver mechanism oil is going to be dissipated.

Call -9158547792

EMBEDDED


13


IEEE

20

15

- M

ECH

AN

ISM

EM11

A Real Time Security System Using Hover Craft In Defense

Application: Smart Surveillance Description: This system is proposed to use as vehicle in military areas for soldiers in the mission. The 8051 microcontroller is used to control the interfaced module like Zigbee and dc motor. Dc motor is employed for hover craft mechanism. Lcd is interfaced to update the status of the system.

EM12

An Innovative Grass Cutter RobotFor Agriculture Field

Application: Agriculture Robot Description: In this proposed system we are cutting the grass of agriculture fied using Robot there will be a cutter used to cut the grass using cutter mechanism

EM13

Dynamic Vision Based Multilevel Car Parking System

Application: Machine Vision Description: This system is mainly used to find the parking place for the car. The IR sensors are used to sense weather the car is present or not. The IR sensor continuously sends IR signals. If the IR signal received means the car is not present & in that place we can park the car

EM14

Automatic Planning And Coverage Of Wall Painting Robot

Application: Super Droid Robots Description: This system is proposed as wall painting robot, to reduce the complexity of the human and also reducing the labor cost. This system is developed by interfacing of color sensor and automated wall painting robot mechanism.

EM15

Detection And Analysis Of High Rise Stationary Pipes

Application: Swarm Robot Description : In proposed system, we can design a new system to check the material quality such as pipe, metal The robot controlling part fully based on wireless protocol Zigbee. Using from PC we are giving the commands for robot operating purpose.

EM16

Low Cost Row Guidance Seeding And Planting Robot

Application: Agriculture Robot Idescription: This system is proposed as agriculture robot, it is mainly used for putting the seed one by one on the former agriculture land. This is developed by interfacing the dc motor and relay driver for agriculture mechanism and Zigbee is used for manipulating the robot by giving input from control section.

EM17

An Efficient Detection And Monitor Of Vehicle Side Stand Alert System

Application: Safer Side Description : In proposed system, side stand mechanism is used. The mechanism checks the side stand of the vehicle and when it is about to be operated by the vehicle holder, it will alert about the status of the side stand and the headlight of the vehicle.

EM18

Machine Vision Technique For Find Out Defect In Orange

Application: Packing Industry Description: Machine vision technique is used to find out the defects in the fruits.To attain our proposed system need to use PIC16F877A microcontroller, weight sensor MAX232, LCD, Buzzer and DC motor. Quality of fruit finding out by MATLAB and give input to the microcontroller.

EM19

Control Of A Snake Robot For Ascending And Descending Steps

Application: Smart Surveillance Description: In this paper, we propose a new snake-like robot for surveillance. It can move in any direction by a proper combination of motor and relays. The mechanism constructed using DC motors; the motors are actuated by electro mechanical relays.

Call -9158547792

EMBEDDED


14


IEEE

20

15

- M

ECH

AN

ISM

EM21

Intelligent Traffic Management System

Application: Humanoid Robot Description: In this system we are going to control the vehicle traffic by a traffic robot. So here we are counting the vehicle density by the IR sensor. Whenever vehicle crossing the IR sensor it will count as a digital pulse that will send to microcontroller.

EM22

High Efficient Parallel Two Way Conveyor Machine

Application: Production Industry Description: This system is mainly used in two way conveyor machine to move in both directions. It can be done by using water bottle. Generally LED sends light to the water bottle. The light signal is received by using the LDR.

EM23

Sophisticated Smart Umbrella For Future Trends

Application: Modern Trends Description: This projects is automatic mechanism of opening and closing of umbrella in future hi – tech parks and hotels. When people came near the umbrella ,PIR sensor sense the presence of human , then automatically open the umbrella

EM24

Online High-Precision Probabilistic Localization Robotic Fish Using Visual And Inertial Cues

Application: Seashore Monitoring Description: In this paper, a wireless underwater fish robot system is designed for underwater mobile robot system which is consists of two parts. First is the underwater mechanical robot and the second is Zigbee wireless based mobile robot which controls and moves the first part.

EM25

Intelligent Cooperative Control System In Visual Welding Robot

Application: Automation Description : This system is mainly used for welding in industries. In this system we are giving input via keypad. Whenever key is pressed based upon the particular value the welding can be done by using the 3 axis welding mechanism

EM26

Energy Exchange Between Electric Vehicle Load And Wind Generating Utilities

Application: Energy Management Idescription: In proposed system, we can design a new system to exchange the supply from renewable source to vehicles Vehicle getting supply battery which is charge from renewable source(wind). Vehicle control through switches. Controller needs 5v DC supply.

EM27

A New, Simple, Low-Cost, Modular Arrangement Of High Power Factor For Window And Wiper Mechanism

Application: Automobiles Description : In this system PIC16F877A, LCD, gas, temperature, rain, GSM, keypad, window mechanism, wiper mechanism and dc motor are used. When anybody tries to unlock car door (by pressing key) it will send random password to owner mobile. And then it waits for password.

EM28

Quadruped Wall-Climbing RobotFor Rescue

Application: Super Droid Robots Description: A novel prototype of self-contained wall-climbing robot used for special tasks such as rescue, inspection, surveillance and reconnaissance is developed. The wheel-leg mechanism enable the robot to achieve quick motion on wall surface, as well as obstacle- spanning on wall surfaces and smooth wall-to-wall transitions

EM29

Automated Anesthesia Analyzing System Based On Micro controller

Application: Biomedical Description: This system is proposed as a automated anesthesia mgs measuring system based on checking the human body parameter like temperature, height and weight. This parameters are sense by temperature sensor, height sensor and weight sensor.

Call -9158547792

EMBEDDED


15


IEEE

20

15

-

MEC

HA

NIS

M

EM30

Modeling And Optimization Of Heat Exchanger Mechanism

Application: Smart Home Description: We propose the system for to control the heat emission from the silencer The main aim of this project is to control the heat from the silencer. Due to ignorance some child , people gets hurt because of that, In order to avoid such kind of acidential damage we developed this project.

IOT1

Alternation usage and predication of power by Embedded in an Internet- of-Things Platform

Application: Energy management Description: In proposed system, both renewable and non renewable energy sources are used We can able to select to run the load, either renewable or nonrenewable source This system is connected with the energy meter and the connection from substation with load. The relay is used to decide the source(renewable or nonrenewable) which the

IEEE

20

15

- IN

TER

NET

OF

THIN

GS

IOT2

Iot Platform Based On Integration Of patient Body Health Sensing And Tele Medicine System

Application: Bio Medical Description: In this system, with the use of ARM microcontrollers, we have designed the system that can deliver drugs to the patient on time and check patient bio-parameters without the presence of the Nurse. The proposed system consists of two sections which are medi-box and care section.

IOT3

An Analysis of patients RFID Authentication Schemes for Internet of Things in Healthcare Environment

Application: Biometric security Description: The proposed system is consist of patient module, security module and monitor section to save the patients in hospital like dynamic ways. In this system, we report an exploration of RFID security system for the patients in the hospitals. The security section has voice recognition kit interfaced with microcontroller.

IOT4

A complete Enriched Clinical hygienic Enabling Deployment in Heterogeneous Healthcare Environments using IOT

Application: Bio Medical Description : This paper presents a system that can be used to monitor the hospital environment. The temperature sensor is used to monitor the temperature, humidity sensor is used to measure cooling level, gas sensor is used to measure the any abnormal odor in surrounding, level sensor is used to measure the level of dust pin and color sensor is used to measure

IOT5

A Novel Method for Fault Detection of Three Phase Transmission Lines by Wide-Area Voltage Measurements in IOT

Application: Energy Management Idescription: The devices are enabled by wireless communication (Zigbee).The fault that occurs at a particular distance of a particular phase. Driver circuit is used to protect the device

IOT6

Behavior Rule Specification-Safety Based on patient and instrument Systems in IOT

Application: Bio Medical Description : This system is mainly used to treatment of vips. In this system, we use the heartbeat sensor, breathe sensor, pressure sensor, for monitoring the patient health. PIR sensor for monitoring the person is present or not.

IOT7

Implementation of a Wireless Health Acquisition System for IEEE 802.15.4 (ZigBee) Applications based on IOT

Application: Bio Medical Description: This system is mainly used for people for jogging, especially used for old people. The mems sensor is used to find weather the person is running and how fast he is running . Based upon this the ecg sensor, breathe sensor , glucose sensor senses the values and sends to the microcontroller

IOT8

RFID based Advanced Technology for security in smart homes using IOT

Application: Smart home Description: This system is mainly used to find security system for bank & high security places. The rfid tag is given to authorized person. When the rfid reader reads the information then he should type password. Then only the door will open. Or the another way is he should go through finger print sensor.

Call -9158547792

EMBEDDED


16


IEEE

20

15

- IN

TER

NET

OF

THIN

GS

IOT9

Monitoring Of Human HealthCondition With Less Power Smart Transmission Mechanism Based On IOT

Application: Bio Medical Description: In this system, we are going to monitor health condition of human with less power. The Blood pressure sensor, Heartbeat sensor and temperature sensor are used monitor the health status of a patient.

IOT10

An Anonymous Authentication Scheme for theft vehicles and easy Plugin charging for Electric Vehicles

Application: Automation Description: In the proposed system if any vehicle is lost it can be found easily at charging section In the proposed system we are using the PIC micro controller for the efficient monitoring.

IOT11

Reliable measurement for Analog Metering system Using Image Processing Technic

Application: Energy management Description: To attain our proposed system need to use PIC16F877A, RTC, LCD, analog energy meter, IR SENSOR. RTC is nothing but real time clock it has information like time and date and calendar. Controller reads the data from RTC.we fix the time in the RTC for certain period of time(one day).

IOT12

Optimization of Renewable Energy Sources and Energy StorageSystems in Islanded Micro grids withIOT

Application: Renewable Energy Management Description: In proposed system both renewable and non renewable energy is used for generation.Current sensor is calculate the current use. To attain our proposed system need to use PIC16F877A, RTC, current sensor, solar , wind mill, battery, LCD, buzzer.

IOT13

The implementation of Nonintrusive Power Supply Design for Self- Powered Sensor Networks in the Smart Grid to detect fault from AC Power Line

Application: Automation Description : In the proposed system we are using the PIC micro controller for the efficient monitoring system for ac load lines. In this we use three sections. In the self -power sensor section use the solar renewable energy for current sensor.

IOT14

Implementation of Smart Sensor Interface for water quality monitoring in industry using IOT

Application: Green house Idescription: This paper presents a system that can be used to monitor the water quality in industries. PH sensor used to measure the PH content in the water. All sensors are connected on the microcontroller and the status of the sensors is send to the control section continuously

IOT15

Implementation of WSN for industrial parameter monitoring based on Internet of Things (IOT)

Application: Automobiles Industries Description : In proposed system, Temperature sensor, gas sensor and Ect sensor are used to monitor the industrial parameter. These three sensors are interfaced with PIC16F877A. This controller continuously processes that sensor values and transmit this values to the intermediate node using Zigbee.

IOT16

IOT based vehicle license plate recognition system

Application: Security system Description: In the proposed system Using MATLAB the vehicle’s License Plate is identified. Using Web Camera mounted over the detection system image of the license plate is captured and the image is processed to extract the license no. Here we have designed the system with the purpose to check traffic violation.

IOT17

Internet based monitoring and Control Oil Reservoirs

Application: Automation Description: In proposed system, oil reservoirs are automatically monitored by Flow sensor, temperature sensor, and viscosity sensor. These three sensors are interfaced with microcontroller. These three sensors are used to monitor the temperature, flow and viscosity of the oil. in addition with this acoustic sensor is connected to the microcontroller.

Call -9158547792

EMBEDDED


17

IEEE

20

15

- R

ASP

BER

RY

PI


IEEE

20

15

- IN

TER

NET

OF

THIN

GS

IOT18

IOT Based Weather Report Application: Green house Description: This paper presents a system that can be used to monitor the landslide in hill areas. The microcontroller is connected with four types of sensors called as rain gauge sensor, moisture sensor, strain gauge sensor and mems sensor. The rain gauge sensor is used to measure the rain fall.

IOT19

Patient Health Management System with IOT

Application: Bio Medical Description: In this system, the PHM is designed to monitor the status of the physical parameters While monitoring there is data updating is happened the system will send the data to the monitoring section

IOT20

An ant+ protocol based health care system

Application: Bio Medical Description: In remote health care Body Area Networks (BAN) are very popular but demand low energy consumption due to very constrained resources. For it several protocols, such as ZigBee, BlueTooth, WiFi etc, have been proposed but non has delivered the optimum results.

IOT21

Multi-hop wban construction for healthcare IOTSystems

Application: Wireless communication Description: In the proposed system we have implemented a multi hop wireless body area network (wban) is a highly suitable communication tool for the medical iot devices. • We have impemented wban through which we can monitor &control the patients condition in remote area.

IOT22

Powering the IOT: storage-less and converter less energy harvesting

Application: Energy management Description : In this project we introduce a novel energy harvesting and management technique to power the IoT,which does not require any long- term energy storages or voltage converters. we provide power management unit(PMU) for energy harvesting

RAP01

Artificial Agents to Support Driver by raspberry pi

Application: Automation Idescription: In proposed system we are using RASPBERRY PIwhich is interface with dc motor and LCD. Here Matlabinput is given to the controller. Matlab part is used to getting the curve path condition.

RAP02

comprehensive research study of the detection of traffic signs by raspberry pi

Application: Smart Surveillance Description : In this project we are discussing aboutautomatic detection of U.S. traffic signs. The watching of Traffic sign is necessity during in the driving. But they fail to watch the sign this causes fine paying are occur to driver, it is avoid by developing automatic detection system.

RAP03

Artificial Steering Feel Is To Synthesize Steering Feedback in Vehicle by Raspberry Pi

Application: Automobiles Description: In this project grip sensor interface with RASPBERRY PIand covered with steering, Which is used to monitoring the grip of the vehicle steering. If driver is not properly hold the steering , speaker will intimating to driver

RAP04

Visual tracking in image streams acquired by static cameras based on change detection by raspberry pi

Application: Image processing Description: In the proposed system the detection of culprits in the defense can be made easy.As the term ‘Synergistic’ means combining of two parameters so that efficiency to be improved. So in the proposed system matlab and embedded are combined to implement. Previously the recognized images are stored in database

Call -9158547792

EMBEDDED


18


IEEE

20

15

- R

ASP

BER

RY

PI

RAP05

An Approach of Data loss recovery in wireless sensor network in Structural Monitoring by raspberry-pi

Application: Machine vision Description: In this system, we are going to monitor the highway using camera. The images from the camera can be recognized and processed and then send to the controller. The status of the highway is displayed in the LCD

RAP06

Advanced metering infrastructure (AMI) to improve system observabilityThrough raspberry -piT

Application: Energy Management Description: To attain our proposed system need to use RASPBERRY PI, RTC, LCD, analog energy meter. RTC is nothing but real time clock it has information like time and date and calendar. Controller reads the data from RTC.

RAP07

Future Infrastructure-Less Self- Organizing Traffic Information System By Raspberry -Pi

Application: Smart monitoring Description: In this system we estimate the traffic level before entering the traffic section by using RASPBERRY PI, GPS and Zigbee. The camera is used to capture the image in traffic section by using MATLAB process we identify the traffic level, then GPS is used for to track the location

RAP08

Location-Based Services (Lbs) For Road-Network Aware Trajectory Integrate With Raspberry - Pi

Application: Smart monitoring Description: In the proposed system the vehicle is designed with voice control along with automated obstacle avoidance. Using voice commands the vehicle is navigated. The microcontroller connected with the voice module kit recognizes the voice command and controls the vehicle movement automatically.

RAP09

Assistive technologies for blind people to describe Indoor sensing by raspberry-pi

Application: Domestic Application Description : In this project we are discussing aboutcompressive sensing approach to describe Indoor scenes for blind people. The camera is used to capture the object and images are processed via image processing and after that APR voice process intimates what type object are in there

RAP10

Hybrid model based on Color, Shape and Motion Detection for Video Surveillance by raspberry-pi

Application: Smart Surveillance Idescription: This system is mainly used in forest areas to monitor from fire attack. The fire sensor senses small fire attack in the forests. Camera then checks the height and motion of the fire. Then it is send to micro controller

RAP11

An internet of things approach for motion detection Using raspberry pi

Application: Security system Description : Internet of things is the communication of anything with any other thing, the communication mainly transferring of useable data, for example a sensor in a room to monitor and control the temperature

RAP12

From RGB led laboratory to servomotor control withWebsockets and as educational tool

Application: Automobiles Industries Description: There are different ways to control robots, but imagine the case of controlling a robot miles and miles away through the internet. This paper describes the use of internet to control the robotic arm from a remote end by means of a visual feedback so the user can see the movement of the robotic arm from anywhere

RAP13

Raspberry pi based global industrial process Monitoring through wireless communication

Application: Automobiles Industries Description: This paper proposes an advanced system for process management via a credit card sized single board computer called raspberry pi based multi parameter monitoring .Hardware system designed using RS232 and microcontroller that measures and controls various global parameters.

Call -9158547792

EMBEDDED


19

IEEE

20

15

- T

ELEM

ATIC

S


IEEE

20

15

- P

OW

ER L

INE

CO

MM

UN

ICA

TIO

N

PC01

Next Generation Narrowband(Under500khz Power Line Communications(Plc) Standards

Application: Energy management Description: In this proposed System to overcome the data losses, we are using plc with 500 kHz for Smart Metering systems. Its two-way communications that enable utilities to interact with meters and allow customer awareness of electricity pricing on a real-time basis

PC02

User Friendly Monitoring System For Residential Pvsystembased On Low Cost Power Line Communication

Application: Smart monitoring Description: This paper describes a low-cost photovoltaic (PV) monitoring system based on power line communication (PLC).For cost reduction, the system adopts a baseband serial communication to remove the modulation transceiver

PC03

Design And Implementation of smart home control systems based on wireless sensor networks and power line communications

Application: Home auotmation Description: This Paper proposed smart home control network is substantially mitigated. Additionally, a smart control algorithm for lighting systems and an analysis of the illumination of a fluorescent lamp were presented.

PC04

Review on Design and Implementation of Energy Efficient Domestic LED Lighting System

Application: Smart Home Description: This paper introduces a new LED Lighting Control System designed to reduce energy consumption of Domestic appliances using multi sensors and wireless technology. The system allows automatic control of household appliances like lamps, fan, etc. through situation awareness such as user movement or the brightness of surrounding.

PC05

Efficiently Operating Wireless Nodes Powered by Renewable Energy Sources

Application: Renewable energy management Description : In proposed system, both renewable and non renewable energy sources are used. we are using the PIC microcontroller for the efficient energy meter monitoring system. This system is connected with the energy meter and the connection from substation with load.

PC06

Cooperative JammingAided Robust Secure Transmission for Wireless Informationand Power Transfer in MISO Channels

Application: Energy management Idescription: In this system our concept need to use pic16f877a controller, voltage sensor, current sensor, speed sensor, buzzer, temperature sensor, LCD and induction motor. Speed value is obtained from speed sensor.

TEL01

Photosensitive security system for theft Detection and control using gsm technology

Application: Security system Description : In this proposed design and development of a theft control system for security lockers, homes, bank lockers, jewelry outlets, etc. The proposed system consists of an LDR (Light Dependent Resistor) based sensor which acts as an electronic eye for detecting the theft or attempt, and a signaling procedure based on SMS

TEL02

A survey of positioning techniques and Location based services in wireless networks

Application: Smart Surveillance Description: In this paper, we explain the principles behind positioning techniques used in satellite networks,mobile networks and Wireless Local Area Networks. We also describe hybrid localization methods that exploit the coexistence of several radio access technologies in the same region, and we classify the location based services into several

TEL03

Smartphone centric ambient assisted living platform for patients suffering from comorbidities monitoring

Application: Bio-medical Description: In this proposed system we are design and develop patients monitoring who is suffering from comorbidites by using smart phone for alert

Call -9158547792

EMBEDDED


20

IEEE

20

15

- L

IFI


IEEE

20

15

- T

ELEM

ATIC

S

TEL04

A Smart Sensor Network For Sea Water Quality Monitoring

Application: Seashore monitoring Description: In this project we present a network of smart sensors, based on IEEE suite of standards, for in situation and in continuous space-time monitoring of surface water bodies in particular for seawater. we are using sensors like turbitity,conductivity,temperature for efficient result. • In remote end we are monitoring result with use of

TEL05

Smartphone Devices for Acquisition and Elaboration of Bio signals

Application: Biometric Security Description: In this system, the WBN is designed to monitor the status of the physical parameters. While monitoring there is data updating is happened the system will send the data to the monitoring section

TEL06

Real-Time Human Mobility State Classification using gsm technology

Application: Smart Surveillance Description: In proposed system, we can design a new to system to get the exact location of the moving person by MEMS technology. Using this information the location map is generated by .net process. The LCD is used to display the current process of the system.

TEL07

A Smart Phone-Based Pocket Fall Accident Detection, Positioning, and Rescue System

Application: Automation Description: In proposed system, we can design a new monitoring and tracking system to provide the accident information to the rescue section automatically by using GSM technology. when the person is fall then sensor give input to the controller, immediately controller track the location using GPS then send the information to the care giver and

LI01

Ecofriendly data transmission in visible Light communication

Application: Go-Green Description :The proposed system can be used in situations where a household has many appliances with audio output such as TV, PC, Hi-fi radio and phone systems • It consists of transmitter, free space channel and the receiver. In the receiver side, solar panel is used instead of using the photodiode receiver as they have the advantage of having a large

LI02

Smart home technologies usingvisibe light communication

Application: Automation Idescription: Smart home technologies using data transmission are presented. Smart home means controlling each and every home appliance automatically without human intervention. Here we are using a new technology of wireless communication “LIFI”.

LI03

A visible light communication link protection mechanism for smart factory

Application: Security system Description : Therefore, we proposed a connection protection mechanism that cooperates with wireless network and visible light communication to achieve reliability and performance in industrial communication network.

LI04

An Indoor Broadband Broadcasting System Based on VLC

Application: Domestic Appliances Description: In proposed system we transmitting data via light with the help of PLC and VLC systems. we transmitting the data from one place to another with the help of LIFI transceiver. categories

LI05

Separate Dimming Controlling and DataTransmission for an Indoor Visible Light Communication System

Application: Automation Description: The proposed system can be used in restaurant wherever the supplier serving to the customer. The proposed system consists of table top transmitter section and customer table receiver section. Whenever the customer reach the table, then PIR sensor sense the person identification and led will change its condition from dim to bright. The LIFI

Call -9158547792

EMBEDDED


21


IEEE

20

15

- L

IFI

LI06

Indoor MIMO Visible Light Communications: Novel Angle Diversity Receivers for Mobile Users

Application: Wireless communication Description: The proposed system can be used in situations where a house, hospitals that wherever the blind person are living in the place. The proposed system consists of indoor transmitter section and blind person receiver section. The transmitter section is kept in the indoor and receiver section given to blind person

LI07

Experimental Biomedical ECG Signal Transmission Using VLC

Application: Bio-Gadgets Description: In proposed system, visible lights are used to transfer the ECG data. Data rate is high compared to other communications. ECG sensor is used to get the heart signal of the human and it is readily transmitted by using the LIFI transmitter. The value is modulated with the light frequency and transmitted to the desired destination

WT01

A Mobile Platform For Wireless Charging And Data Collection In Sensor Networks

Application: Ambient Intelligent Description: Wireless energy transfer (WET) is a new technology that can be used to charge the batteries of sensor nodes without wires. Although wireless, WET does require a charging station to be brought to within reasonable range of a sensor node so that a good energy transfer efficiency can be achieved.

IEEE

20

15

- W

IREL

ESS

PO

WER

TR

AN

SFER

WT02

Wireless Sensor Networks With Rf Energy Harvesting :A Contemporary Survey

Application: Energy Management Description: In proposed system, we can design a new monitoring and tracking system to provide the accident information to the rescue section automatically by using GSM technology. when the person is fall then sensor give input to the controller, immediately controller track the location using GPS then send the information to the care giver and

WT03

Implementation Of Wireless Power Transfer System For Smart Home Applications

Application: Automation Description :In this system is able to transfer power without a man-made conductor connected between power source and electrical load. In proposed system we used electrodynamics induction technique instead of using impedance matching. In this system voltage losses are less.

WT04

Primary side power flow control of wireless power transfer for electric vehicle charging

Application: Automobile industries description: Various non-contacting methods of plug-in electric vehicle (PEV) charging are either under development or now deployed as aftermarket options in the light duty automotive market. Wireless power transfer (WPT) is now the accepted term for wireless charging and is used synonymously for inductive power transfer and magnetic

WT05

Wireless Fleet Charging System for Electric Bicycles

Application: Automobile industries Description : In this project wireless power transmission technique is used for charging vehicle, this can be achieved with the help of piezo-electric power generator, the power generator is placed in speed breaker, whenever the vehicle crossed this speed breaker due to friction it will generate the power

WT06

Harvested Power Wireless Sensor Network Solution for Disaggregated Current Estimation in Large Buildings

Application: Energy Management Description: In proposed system, Wireless power transmission module is used to transfer the power to the peripherals and to electrical devices. Current sensor and voltage sensor are connected to calculate the power consumption which is displaced on the LCD

WT07

Employing Load Coils for Multiple Loads of Resonant Wireless Power Transfer

Application: Energy Management Description: In proposed system, we can design a new system to charging the vehicle battery through wireless charger. Fully automatic system

Call -9158547792

EMBEDDED


22

CODE TITLE DESCRIPTION

IEEE

20

14

- R

OB

OTI

CS

80

51

P

IC

AR

M7

ROB01

Modeling and control of a single axis tilting quad copter

The unmanned aerial vehicle (UAV) is used to increase the endurance of the aircraft. The joystick interfaced with microcontroller for the purpose of control the quad copter actions. The RF wireless technology is used to transfer the signal from control section to quad copter section. CCTV camera is used for monitoring surveillance purpose.

ROB02

Wireless Underwater Mobile Robot System Based on Zigbee

In this paper, a wireless underwater mobile robot system is designed for underwater mobile robot system. Zigbee wireless based mobile robot which controls and moves the underwater mobile robot. CCTV camera is used to monitor the sea.

ROB03

A Compact and Compliant External Pipe-Crawling Robot

The focus of this paper is on the practical aspects of design, prototyping, and testing of a compact, compliant external pipe-crawling robot that can inspect a closely spaced bundle of pipes in hazardous environments and areas that are inaccessible to humans.

ROB04

An Online Stair-Climbing Control Method for a Transformable Tracked Robot

The purpose of the designed robots in intends to carry loads up and down stairs. It needs tremendous effect on expense and time. Furthermore In the paper, a cheap and simple stair-climbing robot will be designed to provide the service of carrying objects up and down stairs.

ROB05

Probability-Based Location Aware Design and On-Demand Robotic Intrusion Detection System

Concept of this project is detecting the intruder in the restricted area and if he violates it. Using this system, we watching the intruder through the web camera, it is continuously monitored in PC. These images are captured by image processing through MATLAB. If the unauthorized code received from robot section, the shooting commands given by control section.

ROB06

Vision Based Robotic System for Military Applications – Design and Real Time Validation

We propose a new tanker robot to detect and attack the intruder in the battle area. We can control the tanker from remote area using Zigbee wireless technology. Wireless CCTV camera is placed on the tanker. The CCTV camera receiver is connected in remote section. We watching the intruder through the CCTV it is continuously monitored in remote section.

ROB07

Towards a New Modality- Independent Interface For a Robotic Wheelchair

This work presents the development of a robotic wheelchair that can be commanded by users in a supervised way or by a fully automatic unsupervised navigation system. It provides flexibility to choose different modalities to command the wheelchair, in addition to be suitable for people with different levels of disabilities. Users can command the wheelchair based on their eye blinks, eye movements, head movements,

ROB08

A Study on Sinus-Lifting Motion of a Snake Robot With Sequential Optimization of a Hybrid System

In this paper, we propose a new snake-like robot for surveillance. It can move in any direction by a proper combination of motor and relays. The mechanism constructed using DC motors; the motors are actuated by electro mechanical relays. By actuating the proper relays, the snake robot is made to move in narrow regions.

ROB09

Development of A Robotic Arm for Dangerous (Explode) Object Disposal

This robot having the pick and place arm for pick explode things. In the proposed system, interfacing the pick and place robot with 89c51 microcontroller through the driver circuit. The robot navigation and operations should be controlled by Zigbee technology. CCTV camera used to get visual of robot navigation area.

Call -9158547792

EMBEDDED


23

IEEE

20

14

- R

OB

OTI

CS

80

51

P

IC

AR

M7

IE

EE 2

01

4 -

Au

tom

atio

n

80

51

P

IC

AR

M7


ROB10

Mobile Robot Localization Using the Phase Of Passive UHF RFID Signals

The proposed system utilizes RFID based localization without using GPS receiver. The RFID tags are patched in floor and the robot has the RFID reader connected to it. Whenever the RFID reader nears a tag, it reads the data from the tag. The position coordinate of the tag is previously stored in the microcontroller. According to the data received from tag, position coordinate is estimated.

ROB11

Design of an Intelligent Security Robot for Collision Free Navigation Applications

A very pertinent aspect of an intelligent security robot is to reach the goal safely by avoiding unknown obstacles in an unknown environment. In this paper we have developed an embedded C program code to design an intelligent robot which can overcome the obstacles coming in its way. We have made use of three infrared sensors to detect the obstacles via the IR communication technique.

ROB12

GSM Controlled Robotics This robot is used for rescue purpose in earthquake areas. In the proposed system the DTMF decoder, PIR sensor, Ultrasonic sensor and the robot is interfaced with the controller. The robot is navigated according to the commands given in the mobile. The DTMF decoder will decode the particular data and give it to the controller. PIR sensor will check human presence Ultrasonic is used to object detected.

ROB13

Vision-Based Robust Path Reconstruction For Robot Control

In this project, web camera and 2 axis robot and LCD display interfaced into AT89C51 microcontroller. Web camera used to capture the line path of the image. By using image processing technology, analyzing the captured image from web camera. After completion of analyzing the image, corresponding information send to microcontroller via MAX232

ROB14

Automatic lighting system using multiple Robotic lamps

An automatic lighting system using 3-DOF robotic lamps and a laser scanner is proposed in this paper. The 3-DOF robotic lamp, which is designed with a spherical parallel mechanism with a unique forward kinematic solution, has a tilting motion to track a person and zoom-in and zoom-out motions to control the light intensity.

ROB15

Google Map and Its Real-Time Implementation on an Unmanned Ground Vehicle

The paper presents the real time embedded implementation of this mapping system on a small Unmanned Ground Vehicle (UGV) to support real time obstacle avoidance. The UGV is controlled by using a RF remote, according to the command from the RF remote the UGV can navigate in the ground.

AM01

Automatic Detection of Squats in Railway Infrastructure

The Transportation of train always depends on railway tracks (rails) only. If there is a crack in these rails, it creates a major problem. Most of the accidents in the train are caused due to cracks in the railway tracks, which cannot be easily identified. In order to avoid this problem, we are using the crack detector robot, which detects the crack in the rails and gives an alarm.

AM02

Receiver Autonomous Integrity

Monitoring of GNSS Signals for

Electronic Toll Collection

A vehicle will hold an RFID tag. This tag is nothing but unique identification number assigned. This will be assigned by RTO or traffic governing authority. In accordance with this number we will store, all basic information as well as the amount he has paid in advance for the TOLL collect. Reader will be strategically placed at toll collection center.

AM03

Locking and unlocking of theft vehicles using CAN

In the proposed system whenever the vehicle is started, a msg with the GPS coordinate of the location of the vehicle is sent as an SMS to the owner's number. On receiving the message the owner can send a reply to lock or antilock that is stop the vehicle or allow the vehicle to run.

Call -9158547792

EMBEDDED


24


AM04

Guest Editorial Special Section on Building Automation, Smart Industry Robot

The proposed system utilizes RFID based localization without using GPS receiver. The RFID tags are patched in floor in each zone and the robot has the RFID reader connected to it. Whenever the RFID reader nears a tag, it reads the data from the tag. According to the data received from tag, position coordinate is estimated.

AM05

Text Detection and Recognition on Traffic Panels From Street-Level Imagery Using Visual Appearance

In the proposed system, a computer vision system which is able to perform automated recognition that could be used to notify a human driver to the presence and nature of road signs is developed. The presence of road sign is identified using MATLAB and the nature of road sign is identified through the same.

AM06

An Industrial Perspective on Wireless Sensor Networks - A Survey of Requirements, Protocols, and Challenges

In our proposed system we are going to monitor the hazardous gases, temperature and also the vibration. The parameters are displayed. In abnormal conditions, for more convenience and for high alert, voice announcement is done. Also the data's are transmitted wireless at a high speed to the control section.

AM07

Implementation of CAN bus in an autonomous All-Terrain Vehicle

The main purpose of this effort is to design an autonomous all terrain vehicle which uses a CAN bus. The paper describes the operation and advantages of the CAN protocol in automobiles. The PIC micro controller is used here and a CAN controller which creates a single two wire bus through which electronic control units (ECU) in the automobiles communicate.

AM08

Design of milk analysis embedded system for dairy farmers

In this paper a milk analyzing system is designed which measures the FAT content and quantity of milk along with the identification of farmers and calculates the cost of milk.

AM09

The house intelligent switch control network based on CAN bus

In this paper we will control the home appliances using can protocol switching and human motion detection both methods will be use.

AM10

Measurement and control system of soil moisture of large greenhouse group based on double CAN bus

In the proposed system CAN based system to monitor the big area of agricultural land and the soil moisture is predicted. Sensors are used to predict the moisture and according to the value the irrigation is done automatically.

AM11

Hand-Motion Crane Control Using Radio Frequency real-Time Location Systems

This Paper presents Ethernet interface The sensor data will update Ethernet means we can see anywhere and know the status.

AM12

An integrated health management p ro c e s s fo r a u to m o t i ve c y b e r - physical systems

In the proposed system the driver assist system is designed with CAN bus. This can be achieved by using two slave parameter sensing controllers and one master controller. Temperature, Viscosity and Gas sensors are used to get engine parameters.

IEEE

20

14

- A

uto

mat

ion

8

05

1

PIC

A

RM

7

Call -9158547792

EMBEDDED


25


IEEE

20

14

- A

uto

mat

ion

8

05

1

PIC

A

RM

7

AM13

An Iranian License Plate Recognition System Based on Color Features

In the proposed system Using MATLAB the vehicle's License Plate is identified. Using Web Camera mounted over the detection system image of the license plate is captured and the image is processed to extract the license no.

AM14

Portable Road side Sensors for Vehicle Counting, Classification, and Speed Measurement

In this system the speed, type of vehicles is monitored wirelessly. Also the number vehicles in the lane are counted and send to the control section. The RFID reader is use to find the vehicle number.

WI01

Channel and Energy Modeling for S e l f - C o nta i n e d W i re l e s s S e n s o r Networks in Oil Reservoirs

In proposed system, we can design a new system to monitor the oil reservoirs automatically and transmit that monitored information using Zigbee technology. In proposed system, oil reservoirs are automatically monitored by Flow sensor, temperature sensor, and viscosity sensor.

IEEE

20

14

- W

ire

less

8

05

1

PIC

A

RM

7

WI02

WSN-Based Smart Sensors and Actuator for Power Management in I n t e l l i g e n t B u i l d i n g s

In this propose a new system to control the electrical devices in home based on the human presence and the environmental parameter. Proposed system the building automation is done using sensors and manual wireless control. It can be operated manually or automatically.

WI03

Data Reduction and Energy Sustenance In Multi sensor Networks for Landslide Monitoring

Our distinguishing contribution is to present studies from significant amounts of data collected from a real world field deployment that has been kept operational for sufficiently long duration amidst inclement weather conditions. This paper presents a system that can be used to monitor the landslide in hill areas.

WI04

A Reconfigurable Smart Sensor Interface for Industrial WSN in IoT Environment

We design and implement a WSN data acquisition interface that can be used for water environmental monitoring. Work flow include a water environment monitoring system that adopts sensors to detect pollution and water quality. This paper presents a system that can be used to monitor the water quality in industries.

WI05

Crop Leaf Area Index Observations With a Wireless Sensor Network and Its Potential for Validating Remote Sensing Products

We design a new system to monitor the growing status of the corn plant in the agricultural land and updated to the former using GSM technology. Here we monitor the corn plant leaf coverage area with help of this we can predict the growth of the plant level automatically. It reduces the data acquisition costs, including instrument and labor costs.

WI06

A Forest Fire Monitoring System Based on GPRS and Zigbee Wireless Sensor Network

In proposed system, we can design a new system to monitor the forest areas. Here the three sensors are used to monitor the environmental condition of that particular area and transmit that monitored information to the collecting section using Zigbee technology.

WI07

Review on Design of a Network for Detection of Environmental Condition Using Wireless Sensor Network Technology

In this project we are using three types of sensor for monitoring the environmental parameters. These sensors are enough to capture the weather conditions and also the field conditions. Here we are using one of the advanced technologies called Zigbee technology for wireless communication of the data.

Call -9158547792

EMBEDDED


26

IEEE

20

14

- W

irel

ess

80

51

P

IC

AR

M7


WI08

A System for Automatic Notification a n d S e v e r i t y E s t i m a t i o n o f Automotive Accidents

In this proposed system, a system has been designed such that it can intimate status of the road to the entire vehicle in its vicinity through Zigbee wireless technology. If the driver sees a vehicle accident or he will press the intimation button. at that time controller take the value from GPS and transmits to the whole area with in the range. Any vehicle come to the coverage range it receives the message.

WI09

Low Power Wireless Sensor Network for Building Monitoring

Analysis of the stability of the building is a needed measurement process for all buildings in the cities. We can design a new system to monitor the construction building stability using wireless technology. The monitoring information is send to the pc using zigbee.

WI10

Wireless Sensor Network Based Smart Home: Sensor Selection, Deployment and Monitoring

In this paper, an elder care system is proposed in which the electrical appliances usage sensor has been developed. we report the design and development of a smart home based on cognitive sensors network. A prototype system has been designed and developed. The sensors detect the usage of appliances at home and collect important information.

GP01

Survey on Smart Grid Technologies- Smart Metering, IoT and EMS

In this proposed system we propose a prepaid smart energy meter with RFID technology. We are using the ARM microcontroller for the efficient energy meter monitoring system. This system is connected with the energy meter with load. User can recharge the system using RFID tag.

IEEE

20

14

- G

SM &

GP

S 8

05

1

PIC

A

RM

7

GP02

Remote Control System of Smart Appliances Based on Wireless Sensor Network

In proposed system, we can design a new home automation system. Here the home appliance is control by three modes. These three modes are keypad mode, GSM mode and auto mode.

GP03

A New Payment System for Enhancing Location Privacy of Electric Vehicles

We propose a new electric vehicle with smart payment system using RFID.RFID tags are used as smart cards. The account balance is intimated to the user as SMS. The anti theft system is comprised of PC to check with database about the vehicle.

GP04

A System for Automatic Notification a n d S e v e r i t y E s t i m a t i o n o f Automotive Accidents

In proposed system WSN are used to find the severity of accident. To attain our proposed system need to use crash sensor, tilt sensor, GPS, GSM, Zigbee, solar panel, buzzer, battery, LCD. Crash sensor is used to find the accident. Tilt sensor is used to estimate the severity of accident. If accident is find it takes the coordination from GPS and send to the care center and also relatives with help of GSM and Zigbee. If Accident occurs

GP05

Domain Specific Search Of Nearest H o s p i t a l a n d H e a l t h c a r e Management System

The proposed system locates nearest available hospital, contacts its ambulance emergency system, accesses a Electronic Health Record of emergency patient that can critically assist in pre hospital treatments. The vehicle accident is automatically intimated to the hospital and relatives using GSM and GPS technology So we can reduce human deaths.

GP06

Understanding Taxi Service Strategies From Taxi GPS Traces

In this proposed system, the customer can book the taxi by sending the SMS to the taxi care center. In this proposed system, we are going to design an automatic call taxi booking system using GSM technology. This system automatically sends the booking status as a SMS (Short message service).

Call -9158547792

EMBEDDED


27

IEEE

20

14

- G

SM &

GP

S 8

05

1

PIC

A

RM

7


GP07

Automated Irrigation System Using a Wireless Sensor Network and GPRS Module

In this system the agricultural land water-level is going to be monitored and updated to the farmer using GSM technology. If the sensor value goes beyond the threshold value the controller will switch ON the Pump Motor to reduce the parameter abnormalities. . The humidity sensor used for measure the moisture level. The sensor values will be continuously updated to the farmer via GSM.

GP08

Human Mobility Enhances Global Positioning Accuracy for Mobile Phone Localization

In proposed system, we can design a new to system to get the exact location of the moving person by MEMS technology.

GP09

R a i l C o m p o n e n t D e t e c t i o n , Optimization, and Assessment for Automatic Rail Track Inspection

In the advanced system, the robot is designed to detect the fault of railway track components in the railway track with the help web camera. These fault information and fault location is send to the control station using GSM and GPS technology.

GP10

Android Interface based GSM Home Security System

In proposed system, we design a home security system using android technology. Here we use the android application to intimate the intruder detection. The intruder detection is intimated using android technology.

GP11

Smart RFID Antenna System for Indoor Tracking and Behavior Analysis of Small Animals in Colony Cages

In this paper, a novel RFID-based approach enabling an effective localization and tracking of small-sized laboratory animals is proposed. It is mainly based on a near-field (NF) RFID multi antenna system working in the UHF bandwidth, to be placed below the animal's cage, and able to rigorously identify the NF RFID tags implanted in laboratory animals.

GP12

Smart parking reservation system using short Message services (SMS)

This paper proposes a Smart Parking Reservation System using Short Message Services (SMS) which provides advanced features like remote parking monitoring, automated guidance, and parking reservation mechanism. The paper describes the overall system architecture of SPARK from hardware to software implementation in the view point of sensor networks.

GP13

A Novel Approach to Implement Green Wave system and Detection of Stolen Vehicles

In proposed system, we can design a new green wave system to provide the priority to the emergency vehicle in the traffic signal. This system also provides the theft vehicle information.

GP14

Bus Monitoring System Based On Zigbee and GPRS

This paper proposes a supervisory system which combines the advantage of zigbee & GPRS Technology. In proposed system, we can design a new system to provide the easy navigation to blind people. This system avoids the manual error.

GP15

Automatic ambulance rescue system We are proposing this system to reduce the traffic by monitoring the density of the traffic using image capturing process. The higher priority is given to the ambulance and the ambulance is fixed with RF transmitters.

Call -9158547792

EMBEDDED


28


CE01

RFID in Underground-Mining Service Applications

In our proposed system we are going to monitor the hazardous gases, temperature. The parameters are displayed. In abnormal conditions, for more convenience and for high alert, voice announcement is done. Also the data's are transmitted wireless at a high speed to the control section. RFID technology is to find the current location of the robot.

CE02

RFID Technology for IOT-Based Personal Healthcare in Smart Spaces

We have designed the system that can monitor the patient on time and without the presence of the nurse in house In-house human behavior detection and Classification are involving wearable tags and bio sensors.

CE03

Virtual Track: Applications and Challenges of the RFID System on Roads

We propose a new automated system to recognize the road sign using RFID. In the proposed system, RFID system which is able to perform automated recognition that could be used to notify a human driver to the presence and nature of road signs is developed.

CE04

A Health-IOT Platform based on the Integration of intelligent Packaging, Bio-Sensor and Intelligent Medicine Box

In this system patient health IOT platform based packing system is design. We have designed the system that can deliver drugs to the patient on time and without the presence of the nurse by setting time of each box of drugs.

CE05

Assistive clothing pattern recognition For visually impaired people

We design a new intelligent clothes choosing system for blind people using camera. Image processing technique is used to recognize the clothe color. The system integrates a camera, a microphone, a computer, and a speaker for audio description of clothing patterns and colors.

CE06

M o d e l i n g a n d D e t e c t i n g Aggressiveness From Driving Signals

We demonstrate that aggressiveness and behavior can be detected by monitoring external driving signals such as fatigue and speed. Image processing technology is used here to monitor the drowsiness. Grip sensor: this sensor is used here to check the grip of driver.

CE07

An Interactive RFID-based Bracelet for Airport Luggage Tracking System

In this project the airport luggage handling is totally automatic. The RFID technology is used for luggage management. In this system a luggage tracking system is designed in which two-way luggage verification is established to avoid unwanted luggage misplacements.

CE08

Intelligent Technologies for Self- Sustaining, RFID-Based, Rural E- Health Systems

We propose a RFID based intelligent system to maintain more accurate medical records, facilitate better healthcare to patients.

CE09

Prototype of a fingerprint based licensing system for driving

In the proposed system we design intelligent license verification and vehicle access system using finger print authentication. This system allow only licensed person to access the vehicle Without wearing seat belt we can't start vehicle. Wearing a seat belt minimizes the body's contact with the interior of the car resulting in fewer injuries.

IEEE

20

14

- C

on

sum

er E

lect

ron

ics

8

05

1

PIC

A

RM

7

Call -9158547792

EMBEDDED


29


BIO1

Mobile Physiological Measurement Platform with Cloud and Analysis Functions Implemented via IPSO

In this proposed system the physiological signals captured by the three physiological signal acquisition modules are sent via a data interface module to a mobile hand held device. While monitoring there is data updating is happened the system will send the data to the monitoring section and updated in internet.

BIO2

A MEMS Dielectric Affinity Glucose Biosensor

In this system, The Glucose sensor used here to sense the Glucose level of the patient. MEMS analyze the position of the patient or user. While monitoring there is any abnormal condition is happened the system will send the message to the appropriate persons that should be the doctor also.

BIO3

Compressed Sensing Technology- Based Spectral Estimation of Heart Rate Variability Using the Integral Pulse Frequency Modulation Model

In this system, The ECG and heart beat sensor used here to sense the ECG level and heart level of the patient. While monitoring there is any abnormal condition is happened the system will send the message to the appropriate persons that should be the doctor also.

BIO4

Integrated Circuits and Electrode I n t e r f a c e s f o r N o n i n v a s i v e Physiological Monitoring

In this system, we are going to monitor BP, PP and Heart beat level of a person upto10 days. The heart beat sensor is clipped in the finger of the driving person of the vehicle. The BP Sensor and PP sensor are also fixed in the fore arms or wrist of that person. The status of the sensor's which placed in the person's body will transmit the value to the Monitor section through Zigbee transceiver.

BIO5

A Survey on Wireless Body Area Networks: Technologies and Design Challenges

In this system, The Heartbeat sensor used here to sense the heartbeat level of the patient and also BP sensor is used to sense the BP level of them. While monitoring there is data updating is happened the system will send the data to the monitoring section.

BIO6

Potential for Health Screening Using L o n g - T e r m C a r d i o v a s c u l a r Parameters Measured by Finger V o l u m e - O s c i l l o m e t r y : P i l o t Comparative Evaluation in Regular and Sleep-Deprived Activities

In this system, we are going to monitor the heat beat and oxygen level and temperature of a volunteers during10 days of day-to-day living (normal condition), and carried out several times at a fixed time every day. During successive 10-day measurements, a 30-hour period of total sleep deprivation was introduced as a physiological challenge (abnormal condition). The heart beat sensor is clipped in the finger of the driving

BIO7

Self Healthcare Management System based on RFID Technology

In this system, we report an exploration of the Self Health Management system. The RFID technology used here to store the data's of a person. The Weight, BP and Temperature of a person have been stored in the controller based on the database.

BIO8

New Design for Electronic Blood Pressure Monitor Based on GSM Module

In this system, we report an exploration of utilizing latest technique to monitor the Blood Pressure of a person. In this system, The compressor BP sensor used here to sense the Blood pressure level of the patient. While monitoring there is any abnormal condition is happened the system will send the message to the appropriate persons that should be the doctor also.

BIO9

Patient Health Management System u s i n g e - H e a l t h M o n i t o r i n g Architecture

In this system, the PHM is designed to monitor the status of the physical parameters.While monitoring there is data updating is happened the s y s t e m w i l l s e n d t h e d a t a t o t h e m o n i t o r i n g s e c t i o n .

IEEE

20

14

- B

IO M

edic

al

80

51

P

IC

AR

M7

ieee embedded 2015_16

Engineering