ifix hmi installation guide

7/31/2019 iFIX HMI Installation Guide

1/35

Prepared By-

Manash Kumar Roy1

4MW DFEG HMI iFIX 4.5 CONFIGURATION

1. Install iFIX 4.5

Figure: 1


2/35

Prepared By-

Manash Kumar Roy2

2. Install iFIX Complete

Figure: 2


3/35

Prepared By-

Manash Kumar Roy3

3. Use

Node Name: FIX

Node Type: SCADA

Connectivity: Standalone

Figure: 3


4/35

Prepared By-

Manash Kumar Roy4

4. Complete the installation process.

Figure: 4


5/35

Prepared By-

Manash Kumar Roy5

5. Install MB1 driverjust as follows

Figure: 5

Figure: 6


6/35

Prepared By-

Manash Kumar Roy6

6. Use Node Type: Server

Figure: 7


7/35

Prepared By-

Manash Kumar Roy7

7. Use Node Name: FIX and Program Folder: FIX Dynamicsas following

Figure: 8


8/35

Prepared By-

Manash Kumar Roy8

Figure: 9

8. Complete the driver installation by clicking on NO and Finish


9/35

Prepared By-

Manash Kumar Roy9

Figure: 10


10/35

Prepared By-

Manash Kumar Roy10

Figure: 11

9. Restart the computer.

10. Add MB1 driver to iFIX System (Figure: 12, 13, 14, 15, 16, 17, 18)


11/35


12/35


13/35


14/35


15/35


16/35


17/35


18/35


19/35


20/35

Prepared By-

Manash Kumar Roy20

Figure: 22

Fill all

Click on

Finish

Figure: 23


21/35


22/35


23/35


24/35


25/35


26/35

Prepared By-

Manash Kumar Roy26

19. Make sure that

Figure: 33


27/35

Prepared By-

Manash Kumar Roy27

20. Open iFIX 4.5

Click

Figure: 34


28/35

Prepared By-

Manash Kumar Roy28

21. Press Control+W

Double Click

Figure: 35


29/35

Prepared By-

Manash Kumar Roy29

22. Find KAFCO database and click on OK

Figure: 36


30/35

Prepared By-

Manash Kumar Roy30

23. Reload database

Figure: 37


31/35

Prepared By-

Manash Kumar Roy31

24. Refresh twice or thrice and observe different real time values will appear and will be changing.

Figure: 38


32/35

Prepared By-

Manash Kumar Roy32

25. Save and exit.

Figure: 39


33/35

Prepared By-

Manash Kumar Roy33

26. Press Control+W to quit from configure mode.

Figure: 40

27. Data will appear depending on COM port assignment. First, make sure COM port is assigned

correctly and same is assigned in MB1

Click and follow the process accordingly.

Figure: 41


34/35

Prepared By-

Manash Kumar Roy34

Figure: 42

Check

This shall same

as COM port

settings.

Figure: 43


35/35

Second, pressing this button transmits and receive data will count.

First press this button

Figure: 44

Now, save and close all windows and start iFIX 4.5.

ifix hmi installation guide

Documents