ift-system paspoert windows per en 14351-1 nr. 12-001465 ... · ift-system passport windows as per...
TRANSCRIPT
ift-System Paspoert Windows per EN 14351-1
Nr. 12-001465-PR09 (SP-A01-Z054-en-03)
Valid until August 2019
/
Characteristics Resistance to
wind load
Resistance to snow and permanent
loads1)
Reaction to fire1)
Water-tightness
Dangerous substances2)
Impact resistance
Load-bearing capacity of safety devices
Class / Value up to C5 / B5
Not applicable
Not applicable
up to E 1350 Country- specific
up to 5 Requirement fulfilled
Characteristics Height and width3)
Ability to release
Acoustic performance
Thermal transmittance
Radiation properties
Air permeability
Operating forces
Class / Value Order-
related npd Rw (C;Ctr)
up to 49 (-1;-4) dB
Standard procedure
CE mark glazing
4 up to 2
Characteristics Mechanical strength
Ventilation Bullet resistance
Explosion resistance
Resistance to repeated opening
and closing
Behaviour between different climates
Burglar resistance
Class / Value
4 npd npd npd up to 3 npd up to WK 3 /
RC 3
Basis
EN 14351-1:2006+A1:2010 Windows and external pedestrian doorsets
ift Certification Scheme for windows and external pedes-trian doorsets (QM320)
Certification and surveillance contract No. 181 7612120
Instructions for use
The ift system passport pro-vides evidence of the general performance of the designated product families as set out by the product standard.
The values/classes indicated refer both to the specific object described in the specific evi-dence of performance and the scope/field of application defined by the ift system passport.
Application of the performance characteristics is subject to the national technical provisions referring to building construc-tion and the respective con-tractual provisions.
This system Pass can be used by the manufacturer to draw up the declaration of performance in accordance with the Con-struction Products Regulation 305/2011 / EU and for issuing the ift Certificate of Conformity, which documents the conformi-ty of the finished products and the factory quality/production control through regular third party audits of the manufactur-ers by the ift Rosenheim.
Notes on publication
The "Conditions and Guidance on the Use of ift Test Documents“ apply.
Contents
The system passport compris-es a total of 45 pages:
1 Summary of performance characteristics as per EN 14351-1 2
2 Overview of the performance of individual product families3
3 Performance characteristics according to the product standard 30
4 General instructions for the ift System Passport 30
5 Special instructions for use30
Client SCHÜCO International KG Karolinenstr. 1-15
33609 Bielefeld
Germany
System AWS 75.SI, AWS 75.SI+
AWS 75 RL.SI AWS 75 RL.SI+
AWS 75 BS.HI, AWS 75 BS.HI+
AWS 75 BS.SI, AWS 75 BS.SI+
AWS 75 WF.SI, AWS 75 WF.SI+
AWS 75 BC.HI, AWS 75 BC.HI+
Product families 1. Side-hung, tilt and turn, bottom-hung and fixed top/fanlight
2. Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Frame material Aluminium/PVC composite system (thermal break system)
1) applies to roof windows only 2) evidence as set out by country of destination 3) clear opening dimensions as specified by manufacturer
ift Rosenheim 24.01.2017
Christian Kehrer, Dipl.-Ing. (FH) Head Certification & Inspection Body
i. A. Michael Breckl-Stock, M.Eng., Dipl.-Ing. (FH) Deputy Head of Testing Depart-ment Construction Product Testing
i. A. Gerhard Fellermeier, Dipl.-Ing. (FH) Operating Product Officer Certification & Surveillance Body
ift-System Passport Windows as per EN 14351-1 Page 2 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
* The relevant reports/evidence of performance are specified in the matrix of the individual product families
1 Summary of performance characteristics as per EN 14351-1
No.
Characteristics as per EN 14351-1
Product family 1 Product family 2
Side-hung, tilt and turn, and bottom-hung with fixed light
Side-hung, tilt and turn, of overlapping design (opening meeting stiles)
4.2
Resistance to wind load
(1) up to C5 / B5 up to C3 / B3
4.3
Resistance to snow and permanent load (roof windows only)
Not applicable Not applicable
4.4.1
Reaction to fire Not applicable Not applicable
4.4.2
External fire performance
Not applicable Not applicable
4.5
Watertightness up to E 1350 up to E 750
4.6
Dangerous substances
The manufacturer shall establish and present the appropriate declaration of content according to the legal requirements in the intended country of destination.
4.7
Impact resistance up to 5 up to 5 (3)
4.8
Loadbearing capacity of safety devices
Threshold value achieved
Threshold value achieved
4.11
Acoustic performance
(2) Rw (C;Ctr) up to 49 (-1;-4) dB Standard procedure
4.12
Thermal transmittance
Standard procedure Standard procedure
4.13
Radiation properties
Evidence of total energy transmittance and light transmittance shall be provided for the purpose-designed system via the CE marking of the glazing..
4.14
Air permeability 4 4
4.16
Operating forces up to 2 up to 2 (3)
4.17
Mechanical strength
4 4 (3)
4.18
Ventilation npd npd
4.19
Bullet resistance npd npd
4.20
Explosion resistance
npd npd
4.21
Resistance to repeated opening and closing
up to 3 up to 3 (3)
4.22
Behaviour between different climates
npd npd
4.23
Burglar resistance up to WK 3 / RC 3
RC 2 / RC 2 N up to WK 3 / RC 3
RC 2 / RC 2 N
Note: The listed performance characteristics represent the product characteristics of the tested specimens. The possibility of combining performance characteristics shall be verified in each individual case.
Superscripts see Section 5
ift-System Passpoert Windows as per EN 14351-1 Page 3 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
2 Overview of the performance of individual product families
2.1 Brief description of product families:
This brief description lists the significant system features of product family 1. For details of the
purpose-designed versions refer to the respective test reports.
Series AWS 75.SI / AWS 75.SI+
Note: The design series RL, RD, MC and ST are covered by expert statement
13-001845-PR06 (GAS-A01-02-de-02) dated 11.02.2015, ift Rosenheim.
Variants Side-hung, bottom-hung, tilt and turn, fixed lights,
top/fanlight
Frame material aluminium/PVC composite system
Profile depth frame member 75 mm, casement member 85 mm
or
frame member 75 mm with HI-insulating bars, casement mem-
ber 85 mm with HI-insulating bars and glazing rebate foam
288138 / 288149 or glazing rebate foam 288021 / 288429
Frame joints mitred and nailed using corner connectors and bonded
or
butt-jointed and nailed using T-cleat and bonded
Rebate design
Rebate seal - centre corner-vulcanised frame gasket 246247 or 284398 or 284848,
EPDM black, supplied by SCHÜCO International KG
or
gasket 244878 or 284201 or 284828 bonded to vulcanised cor-
ner moulds, EPDM black, supplied by SCHÜCO International
KG, in each corner 70 mm sealed below gasket using elastic
sealant
Rebate seal - internal gasket 224310, EPDM black, supplied by SCHÜCO
International KG, continuous around perimeter, at top butt-
jointed and bonded
Rebate drainage 3 slots 5 / 10 mm x 34 / 24 mm to outside with end caps
or
2 slots 10 mm x 34 mm with end caps
Note: verified only with end caps without any additional features (e.g.
membranes, labyrinths).
Pressure equalisation continuous slot between casement and frame members
ift-System Passpoert Windows as per EN 14351-1 Page 4 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Hardware
Make tilt and turn hardware AvanTec / supplied by SCHÜCO
International KG
or
tilt and turn hardware TipTronic / supplied by SCHÜCO
International KG
or
tilt and turn hardware AvanTec SimplySmart /
supplied by SCHÜCO International KG
Glazing insulating glass unit, glass thickness from 19 mm to 65 mm
Glazing gasket - external gasket 224104, EPDM black, supplied by SCHÜCO
International KG, joined at corners and bonded
or
gasket 284321, EPDM black, supplied by SCHÜCO
International KG, continuous around perimeter, at top centre
butt-jointed, corners additionally gunned with sealant
Glazing gasket - internal gasket 284048, EPDM black, supplied by SCHÜCO
International KG, joined at corners and bonded
or
gasket 284323, EPDM black, supplied by SCHÜCO
International KG, continuous around perimeter, at top centre
butt-jointed
or
gasket 284836, EPDM black, supplied by SCHÜCO
International KG, continuous around perimeter, at top centre
butt-jointed
Note: depending on glass thickness und subject to identical material
properties and geometries, gaskets of different thicknesses can
be used.
Vapour pressure equalisation casement member:
on sides, at top, ea. 1 slot of 5 mm x 20 mm,
at bottom 3 or 4 slots of 5 mm x 20 mm,
fixed light: 3 slots of 5 / 10 mm x 34 mm / 24 mm to outside with
end caps
or
two slots on sides and 3 slots at bottom of each 5 mm x 20 mm,
2 boreholes of Ø 5 mm on sides at bottom Ø 5 mm1
1 The boreholes drain the water from the frame member. Boreholes do not touch the glazing rebate platform.
ift-System Passpoert Windows as per EN 14351-1 Page 5 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Series AWS 75 BS.HI / AWS 75 BS.HI+
Variants Side-hung, bottom-hung, tilt and turn, fixed lights,
top/fanlight
Frame material aluminium/PVC composite system
Profile depth frame member 75 mm, casement member 78 mm, face-fitted
Frame joints mitred and nailed using corner connectors and bonded
or
butt-jointed and nailed to T-cleat and bonded
Rebate design
Rebate seal - external see glazing gasket - external
Rebate seal - centre corner-vulcanised frame gasket 246247 or 284398 or 284848,
EPDM black, supplied by SCHÜCO International KG
or
gasket 244878 or 284201 or 284828 bonded using vulcanised
corner moulds, EPDM black, supplied by SCHÜCO
International KG, in each corner 70 mm sealed below gasket
using elastic sealant
Rebate seal - internal gasket 224310, EPDM black, supplied by SCHÜCO
International KG, continuous around perimeter, at top butt-
jointed and bonded
Rebate drainage casement member: 3 slots 5 / 10 mm x 34 / 24 mm to outside
with end caps
Note: verified only with end caps without any additional any features
(e.g. membranes, labyrinths).
Pressure equalisation 2 cut-outs of 3.5 mm x 45 mm in frame member at top
Hardware
Make tilt and turn hardware, AvanTec / supplied by SCHÜCO
International KG
ift-System Passpoert Windows as per EN 14351-1 Page 6 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Series AWS 75 BS.SI / AWS 75 BS.SI+ / AWS 75 WF.SI / AWS 75 WF.SI+ / AWS 75 BC.HI / AWS
75 BC.HI+
Variants Side-hung, bottom-hung, tilt and turn, fixed lights,
top/fanlight
Frame material aluminium/PVC composite system
Profile depth frame member 75 mm, casement member 77.5 mm, face-fitted
Frame joints mitred and nailed using corner connectors and bonded
or
butt-jointed and nailed to T-cleat and bonded
Rebate design
Rebate seal - external see glazing gasket - external
Rebate seal - centre corner-vulcanised frame gasket 244878 or 284201 or 284828,
EPDM black, supplied by SCHÜCO International KG
or
gasket 244878 or 284201 or 284828 bonded using vulcanised
corner moulds, EPDM black, supplied by SCHÜCO
International KG, in each corner 70 mm sealed below gasket
using elastic sealant
Rebate seal - internal gasket 224310, EPDM black, supplied by SCHÜCO
International KG, continuous around perimeter, at top butt-
jointed and bonded
Rebate drainage casement member: 3 slots 5 / 10 mm x 34 / 24 mm to outside
with end caps
Note: verified only with end caps without any additional features (e.g.
membranes, labyrinths).
Pressure equalisation 2 cutouts of 3.5 mm x 45 mm in frame member at top
Hardware
Make tilt and turn hardware, AvanTec / supplied by SCHÜCO
International KG
ift-System Passpoert Windows as per EN 14351-1 Page 7 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Glazing insulating glass unit, glass thickness from 16 mm to 54 mm
Glazing gasket - external corner-vulcanised frame gasket 244752, EPDM black, supplied
by SCHÜCO International KG
or
gasket 224459, EPDM black, supplied by SCHÜCO
International KG, corners mitred and bonded
Glazing gasket - internal gasket 224350, EPDM black, supplied by SCHÜCO
International KG, corners mitred and bonded
or
gasket 224760, EPDM black, supplied by SCHÜCO
International KG, corners mitred and bonded
Note: depending on glass thickness und subject to identical material
properties and geometries, gaskets of different thicknesses can
be used.
Vapour pressure equalisation on sides: each 1 slot 5 mm x 20 mm,
at bottom: 3 slots 5 mm x 20 mm
or
fixed light: 2 slots 5 / 10 mm x 34 / 24 mm to outside with end
caps
ift-System Passpoert Windows as per EN 14351-1 Page 8 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
2.1.1 Overview of performance characteristics of product family 1
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.2
Resistance to wind load(1)
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/6
dated 03.05.07 ift Rosenheim
C4 / B4
AWS 75.SI,
Tilt and turn casement door:
Casement dimensions: 1300 mm x 2,100 mm Frame dimensions: 1,358 mm x 2,158 mm
Test report 102 31393/1
dated 14.05.06 ift Rosenheim
C4 / B4
AWS 75.SI,
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
C5 / B5
AWS 75.SI
Single tilt-and-turn window with fixed sublight:
Casement dimensions: 1,410 mm x 1,450 mm Frame dimensions: 1,468 mm x 2,491 mm
Test report 11-003042-
PR01 dated 12.01.12 ift Rosenheim
C4 / B4
AWS 75.SI
Fixed panel with two fixed lights above each other:
Frame dimensions: 1,468 mm x 2,491 mm
Test report 11-003042-
PR02 dated 12.01.12 ift Rosenheim
C4 / B4
AWS 75 BS.HI
Single bottom-hung toplight:
Casement dimensions: 1,200 mm x 1,400 mm Frame dimensions: 1,278 x 1,478 mm
Test report 10-001653-
PR03 dated 06.08.12 ift Rosenheim
C5 / B5
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR04 dated 06.08.12 ift Rosenheim
C4 / B4
ift-System Passpoert Windows as per EN 14351-1 Page 9 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.2
Resistance to wind load(1)
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
C4 / B4
Extrapolation for -100% of frame width and frame height of test specimen
AWS 75 BS.HI
Tilt and turn window with fixed sidelight:
Casement dimensions: 1,300 mm x 1,800 mm Frame dimensions: 2,320 mm x 1,878 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
C5 / B5
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,558 mm x 2,058 mm
Test report 10-001328-
PR01 dated 16.07.12 ift Rosenheim
C5 / B5
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,000 mm x 1,200 mm Frame dimensions: 1,058 mm x 1,258 mm
Test report 10-001328-
PR03 dated 16.07.12 ift Rosenheim
C5 / B5
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,058 mm x 2,258 mm
Test report 10-001328-
PR05 dated 16.07.12 ift Rosenheim
C5 / B5
AWS 75 WF.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,566 mm x 2,066 mm
Test report 10-001328-
PR06 dated 16.07.12 ift Rosenheim
C5 / B5
AWS 75 BC.HI
Tilt and turn window:
Casement dimensions: 1,250 mm x 1,600 mm Frame dimensions: 1,292 mm x 1,642 mm
Test report 101 34555/1
dated 28.10.08 ift Rosenheim
C5 / B5
ift-System Passpoert Windows as per EN 14351-1 Page 10 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.2
Resistance to wind load(1)
AWS 75 BC.HI
Tilt and turn windows and casement doors - different hardware details
Expert statement 155 37649
dated 01.12.08 ift Rosenheim
C5 / B5
Extrapolation for -100% of frame width and frame height of test specimen
AWS 75 BC.HI, opening outwards
Side-hung casement door, opening outwards:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,054 mm x 2,233 mm
Test report 101 34555/2
dated 28.10.08 ift Rosenheim
C5 / B5
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+
Single windows, different designs
Expert statement 13-000001
PR07 to PR12 dated
June 2013 ift Rosenheim
up to
C5 / B5 see expert statement
AWS 75.SI+, AWS 75 SL.SI+, AWS 75 RL.SI+
Single windows, different designs and differne profile groups
Expert statement 13-001845 PR06 dated 11.02.2015
ift Rosenheim
C5 / B5 see expert statement
AWS 75 BS.HI+, AWS 75BS.SI+ AWS 75 WF.SI+
Single windows, different designs and differne profile groups
Expert statement 13-001845 PR11 dated 11.02.2015
ift Rosenheim
C5 / B5 see expert statement
4.3
Resistance to snow and
permanent load
- - Not applicable Only for roof windows
4.4
Reaction to fire
- - Not
applicable Only for roof windows
ift-System Passpoert Windows as per EN 14351-1 Page 11 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.5
Watertightness
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/6
dated 03.05.07 ift Rosenheim
E 750
Extrapolation for - 100% to +50% of overall test specimen area
AWS 75.SI
Tilt and turn casement door:
Casement dimensions: 1,300 mm x 2,100 mm Frame dimensions: 1,358 mm x 2,158 mm
Test report 102 31393/1
dated 14.05.06 ift Rosenheim
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
9A
AWS 75.SI
Single tilt-and-turn window with fixed sublight:
Casement dimensions: 1,410 mm x 1,450 mm Frame dimensions: 1,468 mm x 2,491 mm
Test report 11-003042-
PR01 dated 12.01.12 ift Rosenheim
E 900
AWS 75.SI
Fixed panel with two fixed lights above each other:
Frame dimensions: 1,468 mm x 2,491 mm
Test report 11-003042-
PR02 dated 12.01.12 ift Rosenheim
9A
AWS 75 BS.HI
Single bottom-hung toplight:
Casement dimensions: 1,200 mm x 1,400 mm Frame dimensions: 1,278 x 1,478 mm
Test report 10-001653-
PR03 dated 06.08.12 ift Rosenheim
E 1350
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR04 dated 06.08.12 ift Rosenheim
9A
ift-System Passpoert Windows as per EN 14351-1 Page 12 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.5
Watertightness
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights:
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
8A
Extrapolation for - 100% to +50% of overall test specimen area
AWS 75 BS:HI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
E 750
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,558 mm x 2,058 mm
Test report 10-001328-
PR01 dated 16.07.12 ift Rosenheim
9A
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,000 mm x 1,200 mm Frame dimensions: 1,058 mm x 1,258 mm
Test report 10-001328-
PR03 dated 16.07.12 ift Rosenheim
E 900
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,058 mm x 2,258 mm
Test report 10-001328-
PR05 dated 16.07.12 ift Rosenheim
E 900
AWS 75 WF.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,566 mm x 2,066 mm
Test report 10-001328-
PR06 dated 16.07.12 ift Rosenheim
9A
AWS 75 BC.HI
Tilt and turn window:
Casement dimensions: 1,250 mm x 1,600 mm Frame dimensions: 1,292 mm x 1,642 mm
Test report 101 34555/1
dated 28.10.08 ift Rosenheim
9A
AWS 75 BC.HI
Tilt and turn windows and casement doors - different hardware details
Expert statement 155 37649
dated 01.12.08 ift Rosenheim
9A
ift-System Passpoert Windows as per EN 14351-1 Page 13 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.5
Watertightness
AWS 75 BC.HI, opening outwards
Side-hung casement door, opening outwards:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,054 mm x 2,233 mm
Test report 101 34555/2
dated 28.10.08 ift Rosenheim
9A
Extrapolation for - 100% to +50% of overall test specimen area
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+
Single windows, different designs
Expert statement 13-000001
PR07 to PR12 dated
June 2013 ift Rosenheim
up to
E 1350 see expert statement
AWS 75.SI+, AWS 75 SL.SI+, AWS 75 RL.SI+
Single windows, different designs and differne profile groups
Expert statement 13-001845 PR06 dated 11.02.2015
ift Rosenheim
9A see expert statement
AWS 75 BS.HI+, AWS 75BS.SI+ AWS 75 WF.SI+
Single windows, different designs and differne profile groups
Expert statement 13-001845 PR11 dated 11.02.2015
ift Rosenheim
9A see expert statement
4.6
Dangerous substances
The manufacturer shall establish and make the appropriate declaration of content according to the legal requirements in the intended country of destination.
4.7
Impact resistance
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
2
> overall test specimen area and observance of locking distances when using same type of hardware
AWS 75 BS.HI
Tilt and turn window:
Casement dimensions: 734 mm x 905 mm Frame dimensions: 776 mm x 947 mm
Impact resistance - from outside to inside
Test report 12-000432-
PR01 dated 20.09.12 ift Rosenheim
2
AWS 75.SI+
Tilt and turn window:
Casement dimensions: 1,000 mm x 1,000 mm Frame dimensions: 1,058 mm x 1,058 mm
Test report 13-001960-PR04 dated 25.11.2013
ift Rosenheim
5
ift-System Passpoert Windows as per EN 14351-1 Page 14 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.7
Impact resistance
AWS 75.SI+
Tilt and turn window
Casement dimensions: 1,000 mm x 1,000 mm Frame dimensions: 1,058 mm x 1,058 mm
Test report 13-001960-PR07 dated 25.11.2013
ift Rosenheim
3
> overall test specimen area and observance of locking distances when using same type of hardware
AWS 75 BS.HI
Tilt and turn window:
Casement dimensions: 734 mm x 905 mm Frame dimensions: 776 mm x 947 mm
Test report 12-000432-
PR02 dated 20.09.12 ift Rosenheim
5
from inside to outside
AWS 75 BS.HI
Tilt and turn window:
Casement dimensions: 734 mm x 905 mm Frame dimensions: 776 mm x 947 mm
Expert statement
12-000432-PR03
dated 25.09.12 ift Rosenheim
5 from inside to outside
2 from outside
to inside
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 942 mm x 942 mm Frame member size: 1,000 mm x 1,000 mm
Test report 10-001328-
PR04 dated 07.12.11 ift Rosenheim
5 from inside to outside
2 from outside
to inside
AWS 75 WF.SI
Tilt and turn window:
Frame dimensions: 1,000 mm x 1,000 mm
Expert statement
10-002491-PR01
dated 27.09.12 ift Rosenheim
5 from inside to outside
2 from outside
to inside
AWS 75 BC.HI
Tilt and turn window:
Frame dimensions: 1,000 mm x 1,000 mm
Expert state-ment
12-002491-PR02
dated 27.09.12 ift Rosenheim
5 from inside to outside
2 from outside
to inside
AWS 60
Single bottom-hung toplight:
Casement dimensions: 922 mm x 922 mm Frame dimensions: 1,000 mm x 1,000 mm
Test report 10-001653-
PR09 dated 23.08.12 ift Rosenheim
2
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+
Single windows, different designs
Expert statement 13-000001
PR07 to PR12 dated
June 2013 ift Rosenheim
up to 5 see expert statement
ift-System Passpoert Windows as per EN 14351-1 Page 15 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.8
Loadbearing capacity of
safety devices
AWS 75 BC.HI
Tilt and turn window:
Casement dimensions: 1,250 mm x 1,600 mm Frame dimensions: 1,292 mm x 1,642 mm
Test report 101 34555/1
dated 28.10.08 ift Rosenheim
Requirement fulfilled
Extrapolation for – 100 % of frame width and frame height of test specimen
AWS 75 BC.HI, opening outwards
Side-hung casement door, opening outwards:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,054 mm x 2,233 mm
Test report 101 34555/2
dated 28.10.08 ift Rosenheim
Requirement fulfilled
AWS 75 BS.HI
Single bottom-hung toplight:
Casement dimensions: 1,200 mm x 1,400 mm Frame dimensions: 1,278 x 1,478 mm
Test report 10-001653-
PR03 dated 06.08.12 ift Rosenheim
Requirement fulfilled
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR04 dated 06.08.12 ift Rosenheim
Requirement fulfilled
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+
Single windows, different designs
Expert statement 13-000001
PR07 to PR12 dated June
2013 ift Rosenheim
Requirement
fulfilled see expert statement
4.9
Height and width
- - Not
applicable Only for external pedestrian doorsets
4.10
Ability to release
- - Not
applicable
Only for external pedestrian doorsets in emergency exit and escape routes in con-junction with EC certif-icate of conformity
ift-System Passpoert Windows as per EN 14351-1 Page 16 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.11
Acoustic performance
(2)
Systems:
• AWS 75.SI
Test report 16131740/1.1.0 dated 10.05.06 ift Rosenheim
Rw (C;Ctr) = 37 (-1;-5) dB
Extrapolation for different window sizes as per Clause B.4 Table B 3 of Annex B, EN 14351-1
Test report 16131740/1.2.0 dated 10.05.06 ift Rosenheim
Rw (C;Ctr) = 39 (-2;-5) dB
Test report 16131740/1.3.0 dated 10.05.06 ift Rosenheim
Rw (C;Ctr) = 42 (-2;-5) dB
Test report 16131740/1.4.0 dated 10.05.06 ift Rosenheim
Rw (C;Ctr) = 44 (-1;-3) dB
Test report 16131740/1.7.0 dated 10.05.06 ift Rosenheim
Rw (C;Ctr) = 48 (-2;-5) dB
Test report 12-002932-PR03 (PB1)
dated 18.12.12 ift Rosenheim
Rw (C;Ctr) = 45 (-3;-5) dB
4.11
Acoustic performance
(2)
Systems:
• AWS 75 BS.HI
Test report 161 31811/Z61 dated 27.10.06 ift Rosenheim
Rw (C;Ctr) = 45 (-1;-4) dB
Extrapolation for different window sizes as per Clause B.4 Table B 3 of Annex B, EN 14351-1
Test report 161 31811/Z62 dated 27.10.06 ift Rosenheim
Rw (C;Ctr) = 49 (-1;-4) dB
Test report 161 31811/Z63 dated 27.10.06 ift Rosenheim
Rw (C;Ctr) = 48 (-1;-4) dB
Test report 161 31811/Z64 dated 27.10.06 ift Rosenheim
Rw (C;Ctr) = 37 (-1;-4) dB
ift-System Passpoert Windows as per EN 14351-1 Page 17 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.11
Acoustic performance
(2)
Systems:
• AWS 75 BS.HI
Test report 161 31811/Z65 dated 27.10.06 ift Rosenheim
Rw (C;Ctr) = 44 (-2;-5) dB
Extrapolation for different window sizes as per Clause B.4 Table B 3 of Annex B, EN 14351-1
Test report 12-002932-PR03 (PB2)
dated 18.12.12 ift Rosenheim
Rw (C;Ctr) = 47 (-1;-5) dB
Systems:
• AWS 75 BS.SI
Test report 12-002932-PR02 (Z12)
dated 18.12.12 ift Rosenheim
Rw (C;Ctr) = 46 (-1;-5) dB
Test report 12-002932-PR02
(Z13) dated 18.12.12
ift Rosenheim
Rw (C;Ctr) = 32 (-1;-5) dB
Test report 12-002932-PR02 (Z14)
dated 18.12.12 ift Rosenheim
Rw (C;Ctr) = 42 (-3;-7) dB
Test report 12-002932-PR02 (Z16)
dated 18.12.12 ift Rosenheim
Rw (C;Ctr) = 38 (-2;-4) dB
Test report 12-002932-PR02 (Z17)
dated 18.12.12 ift Rosenheim
Rw (C;Ctr) = 37 (-2;-5) dB
Test report 12-002932-PR02 (Z18)
dated 18.12.12 ift Rosenheim
Rw (C;Ctr) = 48 (-1;-5) dB
ift-System Passpoert Windows as per EN 14351-1 Page 18 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.11
Acoustic performance
(2)
Systems:
• AWS 75 BC.HI
Test report 161 33377/Z1 dated 07.12.07 ift Rosenheim
Rw (C;Ctr) = 37 (-1;-4) dB
Extrapolation for different window sizes as per Clause B.4 Table B 3 of Annex B, EN 14351-1
Test report 161 33377/Z2 dated 07.12.07 ift Rosenheim
Rw (C;Ctr) = 38 (-2;-5) dB
Test report 161 33377/Z3 dated 07.12.07 ift Rosenheim
Rw (C;Ctr) = 45 (-2;-6) dB
4.12
Thermal transmittance
AWS 75.SI
Frame/casement combination 382110 – 156000
Test report 422 41692/2
dated 20.10.09 ift Rosenheim
Evidence for purpose-
designed unit For determination of
tabulated Uw-values use Table F.1 or Table 1.3 as per EN ISO 10077-1:2006. This Uw-value can be extrapolated for all sizes.
Calculation of Uw
shall be based on EN ISO 10077-1 or EN ISO 10077-1 and EN ISO 10077-2.
For calculation, the following extrapolation rule applies:
Reference size: 1.23 m x 1.48 m (ex-trapolation for overall
area ≤ 2.3 m²) or 1.48 m x 2.18 m (ex-trapolation for overall
area > 2.3 m²) Note: Where Ug < 1.9 W/m²K , extrapolation from 1.23 m x 1.48 m is possible for all sizes.
AWS 75.SI
Frame/casement combinations
Frame profiles
Uf = 0.89 - 1.6 W/(m²K)
Test report 432 38462/1
dated 24.04.09 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75.SI
Frame/casement combinations
Frame profiles, glazing bars
Uf = 0.96 - 1.4 W/(m²K)
Test report 432 38643/1
dated 24.04.09 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75.SI
Frame/casement combinations
Frame profiles, glazing bars
Uf = 0.92 - 1.6 W/(m²K)
Test report 432 41837/1
dated 27.10.09 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75.SI
Frame/casement combinations
Frame profiles
Uf = 1.2 - 1.5 W/(m²K)
Expert statement
455 41692/1 dated 27.10.09 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75.SI
Frame/casement combinations 382110 – 156000
Uf = 1.6 W/(m²K)
Expert state-ment
455 41692/2 dated 27.10.09 ift Rosenheim
Evidence for purpose-
designed unit
ift-System Passpoert Windows as per EN 14351-1 Page 19 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.12
Thermal trans-mittance
AWS 75.SI+
Frame profiles
Glazing bar profiles
Frame/casement combinations
Uf = 0.92 - 1.4 W/(m²K)
Test report 13-001124-
PR01 dated 24.06.13 ift Rosenheim
Evidence for purpose-
designed unit
For calculation, the following extrapolation rule applies:
Reference size: 1.23 m x 1.48 m (ex-trapolation for overall
area ≤ 2.3 m²) or 1.48 m x 2.18 m (ex-trapolation for overall
area > 2.3 m²) Note: Where Ug < 1.9 W/m²K , extrapolation from 1.23 m x 1.48 m is possible for all sizes.
AWS 75 BS.HI
Frame/casement combinations
Frame profiles
Uf = 1.4 - 1.9 W/(m²K)
Test report 432 41674/1
dated 19.10.09 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75 BS.SI
Frame/casement combinations
Frame profiles
Uf = 1.3 - 1.6 W/(m²K)
Test report 432 41674/2
dated 19.10.09 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75 BS.SI+
Frame/casement combinations
Frame profiles
Uf = 1.3 - 1.5 W/(m²K)
Test report 13-000854-
PR01 dated 16.07.13 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75 BS.HI+
Frame/casement combinations
Frame profiles
Uf = 1.4 - 1.8 W/(m²K)
Test report 13-000854-
PR02 dated 16.07.13 ift Rosenheim
Evidence for purpose-
designed unit
AWS 75 BC.HI
Frame/casement combinations
Frame profiles
Uf = 1.3 - 2.2 W/(m²K)
Test report 422 35753/1
dated 21.10.08 ift Rosenheim
Evidence for purpose-
designed unit
4.13
Radiation prop-erties
All See CE mark-ing of glazing
Evidence for purpose-
designed unit -
ift-System Passpoert Windows as per EN 14351-1 Page 20 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.14
Air permeability
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/6
dated 03.05.07 ift Rosenheim
4
Extrapolation for –100% to +50% of overall test specimen area
AWS 75.SI
Tilt and turn casement door:
Casement dimensions: 1,300 mm x 2,100 mm Frame dimensions: 1,358 mm x 2,158 mm
Test report 102 31393/1
dated 14.05.06 ift Rosenheim
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
AWS 75.SI
Single tilt-and-turn window with fixed sublight:
Casement dimensions: 1,410 mm x 1,450 mm Frame dimensions: 1,468 mm x 2,491 mm
Test report 11-003042-
PR01 dated 12.01.12 ift Rosenheim
4
AWS 75.SI
Fixed panel with two fixed lights above each other:
Frame dimensions: 1,468 mm x 2,491 mm
Test report 11-003042-
PR02 dated 12.01.12 ift Rosenheim
4
AWS 75 BS.HI
Single bottom-hung toplight:
Casement dimensions: 1,200 mm x 1,400 mm Frame dimensions: 1,278 x 1,478 mm
Test report 10-001653-
PR03 dated 06.08.12 ift Rosenheim
4
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR04 dated 06.08.12 ift Rosenheim
4
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights:
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
4
ift-System Passpoert Windows as per EN 14351-1 Page 21 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.14
Air permeability
AWS 75 BS.HI
Tilt and turn window with fixed sidelight:
Casement dimensions: 1,300 mm x 1,800 mm Frame dimensions: 2,320 mm x 1,878 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
4
Extrapolation for -100% to +50% of overall test specimen area
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,558 mm x 2,058 mm
Test report 10-001328-
PR01 dated 16.07.12 ift Rosenheim
4
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,000 mm x 1,200 mm Frame dimensions: 1,058 mm x 1,258 mm
Test report 10-001328-
PR03 dated 16.07.12 ift Rosenheim
4
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1000 mm x 2,200 mm Frame dimensions: 1,058 mm x 2,258 mm
Test report 10-001328-
PR05 dated 16.07.12 ift Rosenheim
4
AWS 75 WF.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,566 mm x 2,066 mm
Test report 10-001328-
PR06 dated 16.07.12 ift Rosenheim
4
AWS 75 BC.HI
Tilt and turn window:
Casement dimensions: 1,250 mm x 1,600 mm Frame dimensions: 1,292 mm x 1,642 mm
Test report 101 34555/1
dated 28.10.08 ift Rosenheim
4
AWS 75 BC.HI
Tilt and turn windows and casement doors - different hardware details
Expert state-ment
155 37649 dated 01.12.08 ift Rosenheim
4
AWS 75 BC.HI, opening outwards
Side-hung casement door, opening outwards:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,054 mm x 2,233 mm
Test report 101 34555/2
dated 28.10.08 ift Rosenheim
4
ift-System Passpoert Windows as per EN 14351-1 Page 22 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.14
Air permeability
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+
Single windows, different designs
Expert statement 13-000001
PR07 to PR12 dated
June 2013 ift Rosenheim
4 see expert statement
AWS 75.SI+, AWS 75 SL.SI+, AWS 75 RL.SI+
Single windows, different designs and differne profile groups
Expert statement 13-001845 PR06 dated 11.02.2015
ift Rosenheim
4 see expert statement
AWS 75 BS.HI+, AWS 75BS.SI+ AWS 75 WF.SI+
Single windows, different designs and differne profile groups
Expert statement 13-001845 PR11 dated 11.02.2015
ift Rosenheim
4 see expert statement
4.16
Operating forces
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/6
dated 03.05.07 ift Rosenheim
1
Extrapolation for -100% of overall test specimen area
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
1
AWS 75.SI
Tilt and turn casement door:
Casement dimensions: 1,300 mm x 2,100 mm Frame dimensions: 1,358 mm x 2,158 mm
**) Locking and unlocking of casement by power-operated drive; activation of drive by handle operation
Test report 102 31393/1
dated 14.05.06 ift Rosenheim
2*)
AWS 75.SI+
Tilt and turn window
Frame dimensions: 1,758 mm x 2,158 mm
Test report 13-001960-PR05 dated
15.05.14 ift Rosenheim
1
ift-System Passpoert Windows as per EN 14351-1 Page 23 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.16
Operating forces
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR04 dated 06.08.12 ift Rosenheim
1
Extrapolation for -100% of overall test specimen area
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR05 dated 30.01.13 ift Rosenheim
1
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights:
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
1
AWS 75 BS.HI
Tilt and turn window with fixed sidelight:
Casement dimensions: 1,300 mm x 1,800 mm Frame dimensions: 2,320 mm x 1,878 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
1
AWS 75 BS.HI
Single bottom-hung toplight:
Casement dimensions: 1,200 mm x 1,600 mm Frame dimensions: 1,278 mm x 1,678 mm
Test report 10-001653-
PR08 dated 30.01.13 ift Rosenheim
1
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,558 mm x 2,058 mm
Test report 10-001328-
PR01 dated 16.07.12 ift Rosenheim
1
AWS 75 BS.SI
Tilt and turn window:
Frame dimensions: 1,566 mm x 2,066
*for 70 mm opening width of stay
Expert statement
10-001328-PR09
dated 06.05.13 ift Rosenheim
1*)
AWS 75 WF.SI Tilt and turn window: Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,566 mm x 2,066 mm
Test report 10-001328-
PR06 dated 16.07.12 ift Rosenheim
1
ift-System Passpoert Windows as per EN 14351-1 Page 24 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.16
Operating forces
AWS 75 WF.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,566 mm x 2,066 mm
*for 70 mm opening width of stay
Test report 10-001328-
PR07 dated 25.03.13 ift Rosenheim
1*)
Extrapolation for -100% of overall test specimen area
AWS 75 BC.HI
Tilt and turn window:
Casement dimensions: 1,250 mm x 1,600 mm Frame dimensions: 1,292 mm x 1,642 mm
Test report 101 34555/1
dated 28.10.08 ift Rosenheim
1
AWS 75 BC.HI
Tilt and turn windows and casement doors - different hardware details
Expert state-ment
155 37649 dated 01.12.08 ift Rosenheim
1
AWS 75 BC.HI, opening outwards
Side-hung casement door, opening outwards:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,054 mm x 2,233 mm
Test report 101 34555/2
dated 28.10.08 ift Rosenheim
1
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+ Single windows, different designs
Expert state-ment
13-000001 PR07 to PR12
dated June 2013
ift Rosenheim
up to 2 see expert statement
4.17
Mechanical strength
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/6
dated 03.05.07 ift Rosenheim
4
Extrapolation for –100% of overall test specimen area
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
4
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR04 dated 06.08.12 ift Rosenheim
4
AWS 75.SI+
Tilt and turn window Frame dimensions: 1,758 mm x 2,158 mm
Test report 13-001960-PR02 dated
19.05.14 ift Rosenheim
4
ift-System Passpoert Windows as per EN 14351-1 Page 25 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.17
Mechanical strength
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights:
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
4
Extrapolation for –100% of overall test specimen area
AWS 75 BS.HI
Tilt and turn window with fixed sidelight:
Casement dimensions: 1,300 mm x 1,800 mm Frame dimensions: 2,320 mm x 1,878 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
4
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,558 mm x 2,058 mm
Test report 10-001328-
PR01 dated 16.07.12 ift Rosenheim
4
AWS 75 WF.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,566 mm x 2,066 mm
Test report 10-001328-
PR06 dated 16.07.12 ift Rosenheim
4
AWS 75 BC.HI
Tilt and turn window:
Casement dimensions: 1,250 mm x 1,600 mm Frame dimensions: 1,292 mm x 1,642 mm
Test report 101 34555/1
dated 28.10.08 ift Rosenheim
4
AWS 75 BC.HI
Tilt and turn windows and casement doors - different hardware details
Expert statement 155 37649
dated 01.12.08 ift Rosenheim
4
AWS 75 BC.HI, opening outwards
Side-hung casement door, opening outwards:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,054 mm x 2,233 mm
Test report 101 34555/2
dated 28.10.08 ift Rosenheim
4
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+
Single windows, different designs
Expert statement 13-000001
PR07 to PR12 dated June
2013 ift Rosenheim
4 see expert statement
ift-System Passpoert Windows as per EN 14351-1 Page 26 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.18
Ventilation
- - Not
applicable
applies only to windows with integrat-ed ventilation device
4.19
Bullet resistance
- - npd -
4.20
Explosion resistance
- - npd
-
4.21
Resistance to repeated open-ing and closing
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/6
dated 03.05.07 ift Rosenheim
2
Extrapolation for –100% of overall test specimen area subject to conformity with maximum casement weight as tested.
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
3
AWS 75.SI+
Tilt and turn window
Frame dimensions: 1,758 mm x 2,158 mm
Test report 13-001960-PR05 dated
15.05.14 ift Rosenheim
3
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights:
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
3
AWS 75 BS.HI
Tilt and turn window with fixed sidelight:
Casement dimensions: 1,300 mm x 1,800 mm Frame dimensions: 2,320 mm x 1,878 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
3
AWS 75 BS.HI
Single bottom-hung toplight:
Casement dimensions: 1,200 mm x 1,600 mm Frame dimensions: 1,278 mm x 1,678 mm
Test report 10-001653-
PR08 dated 30.01.13 ift Rosenheim
3
ift-System Passpoert Windows as per EN 14351-1 Page 27 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.21
Resistance to repeated open-ing and closing
AWS 75 BS.SI
Tilt and turn window:
Frame dimensions: 1,566 mm x 2,066
*for 70 mm opening width of stay
Expert statement
10-001328-PR09
dated 06.05.13 ift Rosenheim
2
Extrapolation for –100% of overall test specimen area subject to conformity with maximum casement weight as tested.
AWS 75.SI
Single bottom-hung toplight:
Casement dimensions: 2,400 mm x 1,500 mm Frame dimensions: 2,478 mm x 1,578 mm
Test report 10-001653-
PR05 dated 30.01.13 ift Rosenheim
3
AWS 75 WF.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,566 mm x 2,066 mm
Test report 10-001328-
PR07 dated 25.03.13 ift Rosenheim
2
AWS 75 BC.HI
Tilt and turn window:
Casement dimensions: 1,250 mm x 1,600 mm Frame dimensions: 1,292 mm x 1,642 mm
Test report 101 34555/1
dated 28.10.08 ift Rosenheim
3
AWS 75 BC.HI
Tilt and turn windows and casement doors - different hardware details
Expert statement 155 37649
dated 01.12.08 ift Rosenheim
2
AWS 75 BC.HI, opening outwards
Side-hung casement door, opening outwards:
Casement dimensions: 1,000 mm x 2,200 mm Frame dimensions: 1,054 mm x 2,233 mm
Test report 101 34555/2
dated 28.10.08 ift Rosenheim
3
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 RL.SI+, AWS 75 BC.HI+
Single windows, different designs
Expert statement 13-000001
PR07 to PR12 dated June
2013 ift Rosenheim
up to 3 see expert statement
4.22
Behaviour between
different climates
- - npd -
ift-System Passpoert Windows as per EN 14351-1 Page 28 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, bottom-hung, tilt and turn, top/fanlight, fixed, double with mullion
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.23
Burglar resistance
AWS 75.SI / AWS 75 BS.HI, TipTronic AWS 75 SI, TipTronic AWS 75 BS.HI
Attack side: Closing side / closing face as per DIN 107
Glazing: Class P4A as per DIN EN 356 : 2000-02 Type of burglar resistant double windows as per annexes of expert statement, for hard-ware system of burglar resistant fittings refer to Annex 1 of referenced expert statement
Expert statement
211 23753/2 dated 03.07.06 ift Rosenheim
WK 2 see expert statement and/or ENV 1627:1999
AWS 75.SI / AWS 75 BS.HI
Attack side: Closing side / closing face as per DIN 107
Glazing: Class P5A as per EN 356 : 2000-02
Hardware: security locking devices SCHÜCO No. 227036 and 228500 (BS series) and se-curity lock SCHÜCO No. 214863
For further details refer to Annex of expert statement
Type of burglar resistant double windows as per annexes of expert statement
Expert statement
211 24308/1 dated 12.09.06 ift Rosenheim
WK 3 see expert statement and/or ENV 1627:1999
AWS 75 BS.SI
Burglar resistant single window
Casement dimensions: 1,360 mm x 1,510 mm Frame dimensions: 1,508 mm x 1,658 mm
with 6 burglar resistant locking devices
Test report 12-000215-PR01 dated
05.11.12 ift Rosenheim
RC2 / RC2N See EN 1627:2011
AWS 75 BS.SI, AWS 75 BS.SI+, AWS 75 WF.SI, AWS 75 WF.SI+
Burglar resistant single window - different pro-file systems
Expert statement
12-000215-PR02 dated
18.07.13 ift Rosenheim
RC2 / RC2N see expert statement and/or ENV 1627:2011
AWS.75 SI+, AWS RL.SI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 BS.HI+, AWS 75 WF.HI+, AWS 75 VV.SI+
For further details, refer to Annex to the ex-pert statement
Design of burglar-resistent 2-winged windows according to annex in expert statement
Expert statement
15-002426-PR02 dated 14.10.2016
RC 2 / RC 2N see expert statement and/or ENV 1627:2011
AWS.75.SI+, AWS 75 RL.SI+, AWS 75 BS.HI+, AWS 75 WF.HI+
For further details, refer to Annex to the ex-pert statement
Design of burglar-resistent 2-winged windows according to annex in expert statement
Expert statement
15-002426-PR03 dated 14.10.2016
RC 3 see expert statement and/or ENV 1627:2011
ift-System Passpoert Windows as per EN 14351-1 Page 29 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
2.1.2 Overview of performance characteristics of product family 2
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.2
Resistance to wind load(1)
AWS 75.SI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Active casement: 1,000 mm x 1,600 mm Inactive casement: 1,600 mm x 1,300 mm Frame dimensions: 2,465 mm x 1,658 mm
Test report 10-000730-
PB02 dated 15.12.10 ift Rosenheim
C3 / B3
Extrapolation for –100 % of frame width and frame height of test specimen
AWS 75.SI+
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Active casement: 1,000 mm x 1,600 mm Inactive casement: 1,400 mm x 1,600 mm Frame dimensions: 2,465 mm x 1,658 mm
Test report 13-000001-
PR03 dated 07.05.13 ift Rosenheim
C3 / B3
AWS 75 BS.HI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm
Expert statement
12-002491-PR03
dated 02.10.12 ift Rosenheim
C2 / B3
AWS 75 BS.SI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm Active casement: 1000 mm x 2,000 mm
Test report 10-000730-
PB03 dated 14.12.10 ift Rosenheim
C2 / B3
AWS 75 BS.SI+
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm Active casement: 1000 mm x 2,000 mm
Test report 13-000001-
PR04 dated 07.05.13 ift Rosenheim
C2 / B3
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+
Double windows of overlapping design (open-ing meeting stiles)
Expert statement 13-000001
PR07 to PR12 dated June
2013 ift Rosenheim
up to
C3 / B3
ift-System Passpoert Windows as per EN 14351-1 Page 30 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.2
Resistance to wind load(1)
AWS 75.SI+, AWS 75 SL.SI+, AWS 75 RL.SI+
Single windows, different designs and differne profile groups
Expert Statement 13-001845 PR06 dated 11.02.2015
ift Rosenheim
C3 / B3 see expert statement
AWS 75 BS.HI+, AWS 75BS.SI+ AWS 75 WF.SI+
Single windows, different designs and differne profile groups
Expert Statement 13-001845 PR11 dated 11.02.2015
ift Rosenheim
up to C3 / B3 see expert statement
4.3
Resistance to snow and permanent
load
- - Not applicable
Only for roof windows
4.4.1
Reaction to fire
- - Not applicable
Only for roof windows
4.4.2
External fire performance
- - Not applicable
Only for roof windows
4.5
Watertightness
AWS 75.SI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Active casement: 1,000 mm x 1,600 mm Inactive casement: 1,400 mm x 1,600 mm Frame dimensions: 2,465 mm x 1,658 mm
Test report 10-000730-
PB02 dated 15.12.10 ift Rosenheim
7A
Extrapolation for -100% to +50% of overall test specimen area
AWS 75.SI+
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Active casement: 1,000 mm x 1,600 mm Inactive casement: 1,400 mm x 1,600 mm Frame dimensions: 2,465 mm x 1,658 mm
Test report 13-000001-
PR03 dated 07.05.13 ift Rosenheim
7A
ift-System Passpoert Windows as per EN 14351-1 Page 31 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.5
Watertightness
AWS 75 BS.HI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm
Expert statement
12-002491-PR03
dated 02.10.12 ift Rosenheim
7A
Extrapolation for -100% to +50% of overall test specimen area
AWS 75 BS.SI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm Active casement: 1,000 mm x 2,000 mm
Test report 10-000730-
PB03 dated 14.12.10 ift Rosenheim
7A
AWS 75 BS.SI+
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm Active casement: 1,000 mm x 2,000 mm
Test report 13-000001-
PR04 dated 07.05.13 ift Rosenheim
E 750
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+
Double windows of overlapping design (open-ing meeting stiles)
Expert statement 13-000001
PR07 to PR12 dated
June 2013 ift Rosenheim
up to E 750 see expert statement
AWS 75.SI+, AWS 75 SL.SI+, AWS 75 RL.SI+
Single windows, different designs and differne profile groups
Expert Statement 13-001845 PR06 dated 11.02.2015
ift Rosenheim
7A see expert statement
AWS 75 BS.HI+, AWS 75BS.SI+ AWS 75 WF.SI+
Single windows, different designs and differne profile groups
Expert Statement 13-001845 PR11 dated 11.02.2015
ift Rosenheim
7A see expert statement
4.6
Dangerous substances
The manufacturer shall establish and submit the appropriate declaration of content according to the legal requirements in the intended country of destination.
ift-System Passpoert Windows as per EN 14351-1 Page 32 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.7
Impact resistance (3)
AWS 75.SI
Tilt and turn window:
Casement dimensions: 942 mm x 942 mm Frame dimensions: 1,000 mm x 1,000 mm
Test report 101 38524/2
dated 07.04.09 ift Rosenheim
2
> overall test speci-men area (infill panel)
and compliance with locking distances when using same type of hardware
AWS 75.SI+
Tilt and turn window:
Casement dimensions: 1,000 mm x 1,000 mm Frame dimensions: 1,058 mm x 1,058 mm
Test report 13-001960-
PR04 dated 25.11.13 ift Rosenheim
5
AWS 75.SI+
Tilt and turn window:
Casement dimensions: 1,000 mm x 1,000 mm Frame dimensions: 1,058 mm x 1,058 mm
Test report 13-001960-
PR07 dated 25.11.13 ift Rosenheim
3
AWS 75 BS.HI
Tilt and turn window:
Casement dimensions: 734 mm x 905 mm Frame dimensions: 776 mm x 947 mm
Impact resistance - from outside to inside
Test report 12-000432-
PR01 dated 20.09.12 ift Rosenheim
2
AWS 75 BS.HI
Tilt and turn window:
Casement dimensions: 734 mm x 905 mm Frame dimensions: 776 mm x 947 mm
Impact resistance - from inside to outside
Test report 12-000432-
PR02 dated 20.09.12 ift Rosenheim
5
AWS 75 BS.HI
Tilt and turn window:
Casement dimensions: 734 mm x 905 mm Frame dimensions: 776 mm x 947 mm
Expert statement
12-000432-PR03
dated 25.09.12 ift Rosenheim
5 from inside to outside
2 from outside
to inside
ift-System Passpoert Windows as per EN 14351-1 Page 33 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.7
Impact resistance (3)
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 942 mm x 942 mm Frame dimensions: 1,000 mm x 1,000 mm
Test report 10-001328-
PR04 dated 07.12.11 ift Rosenheim
5 from inside to outside
2 from outside
to inside
> overall test speci-men area (infill panel)
and compliance with locking distances when using same type of hardware
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+
Double windows of overlapping design (open-ing meeting stiles)
Expert statement 13-000001
PR07 to PR12 dated June
2013 ift Rosenheim
up to 5 see expert statement
4.8
Loadbearing capacity of
safety devices
see product family 1 - see product family 1
- 100 % of test speci-men overall area.
4.11
Acoustic performance(2)
-
Evidence must be provided based on Tables B.1 and B.2 of Annex B, EN 14351-1:2006+A1:2010
Note: cross compari-son with 4.14, air permeability ≥ class 3 re-quired
Evidence for purpose-
designed unit
Extrapolation for different window sizes as per Clause B.4 Table B 3 of Annex B, EN 14351-1
ift-System Passpoert Windows as per EN 14351-1 Page 34 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.12
Thermal transmittance
-
Calculation of U
w shall be
based on EN ISO 10077-1 and/or EN ISO 10077-1 and EN ISO 10077-2.
Alternatively the tabulated method as per Table F.1 or Table F.3, in accordance with EN ISO 10077-1:2006.
Evidence for purpose-
designed unit
as per Table E 1, EN 14351-1
4.13
Radiation properties
All CE mark glazing
Evidence for purpose-
designed unit
-
4.14
Air permeability
AWS 75.SI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Active casement: 1,000 mm x 1,600 mm Inactive casement: 1,400 mm x 1,600 mm Frame dimensions: 2,465 mm x 1,658 mm
Test report 10-000730-
PB02 dated 15.12.10 ift Rosenheim
4
Extrapolation for -100% to +50% of overall test specimen area
AWS 75.SI+
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Active casement: 1,000 mm x 1,600 mm Inactive casement: 1,400 mm x 1,600 mm Frame dimensions: 2,465 mm x 1,658 mm
Test report 13-000001-
PR03 dated 07.05.13 ift Rosenheim
4
AWS 75 BS.HI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm
Expert statement
12-002491-PR03
dated 02.10.12 ift Rosenheim
4
ift-System Passpoert Windows as per EN 14351-1 Page 35 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.14
Air permeability
AWS 75 BS.SI
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm Active casement: 1,000 mm x 2,000 mm
Test report 10-000730-
PB03 dated 14.12.10 ift Rosenheim
4
Extrapolation for -100% to +50% of overall test specimen area
AWS 75 BS.SI+
Double side-hung / tilt and turn window of overlapping design (opening meeting stiles)
Frame dimensions: 2,065 mm x 2,258 mm Active casement: 1,000 mm x 2,000 mm
Test report 13-000001-
PR04 dated 07.05.13 ift Rosenheim
4
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+
Double window of overlapping design (open-ing meeting stiles)
Expert statement 13-000001
PR07 to PR12 dated
June 2013 ift Rosenheim
4 see expert statement
AWS 75.SI+, AWS 75 SL.SI+, AWS 75 RL.SI+
Single windows, different designs and differne profile groups
Expert Statement 13-001845 PR06 dated 11.02.2015
ift Rosenheim
4 see expert statement
AWS 75 BS.HI+, AWS 75BS.SI+ AWS 75 WF.SI+
Single windows, different designs and differne profile groups
Expert Statement 13-001845 PR11 dated 11.02.2015
ift Rosenheim
4 see expert statement
4.16
Operating forces (3)
see product family 1 - see product family 1
Extrapolation for –100% of test specimen overall area
ift-System Passpoert Windows as per EN 14351-1 Page 36 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.17
Mechanical strength (3)
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 30951/6
dated 03.05.07 ift Rosenheim
4
Extrapolation for -100% of overall test specimen area
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
4
AWS 75.SI+
Tilt and turn casement door
Frame dimensions: 1,758 mm x 2,158 mm
Test report 13-001960-PR02 dated
19.05.14 ift Rosenheim
4
4.17
Mechanical strength
(3)
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights:
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
4
Extrapolation for -100% of overall test specimen area
AWS 75 BS.HI
Tilt and turn window with fixed sidelight:
Casement dimensions: 1,300 mm x 1,800 mm Frame dimensions: 2,320 mm x 1,878 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
4
AWS 75 BS.SI
Tilt and turn window:
Casement dimensions: 1,500 mm x 2,000 mm Frame dimensions: 1,558 mm x 2,058 mm
Test report 10-001328-
PR01 dated 16.07.12 ift Rosenheim
4
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+
Double windows of overlapping design (open-ing meeting stiles)
Expert statement 13-000001
PR07 to PR12 dated
June 2013 ift Rosenheim
4
ift-System Passpoert Windows as per EN 14351-1 Page 37 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.18
Ventilation
- - npd Same design and size of ventilation device
4.19
Bullet resistance
- - npd Until relevant stand-ards and/or guidelines are in place, undetermined condi-tions shall be agreed on by the manufactur-er and the testing laboratory.
4.20
Explosion resistance
- - npd
4.21
Resistance to repeated
opening and closing
(3)
AWS 75.SI
Tilt and turn casement door with fixed fanlight:
Casement dimensions: 1,700 mm x 2,100 mm Frame dimensions: 1,778 mm x 2,639 mm
Test report 101 38524/1
dated 02.09.09 ift Rosenheim
3
Extrapolation for –100% of overall test specimen area subject to conformity with maximum casement weight as tested.
AWS 75.SI+
Tilt and turn window
Frame dimensions: 1,778 mm x 2,639 mm
Test report 13-001960-PR05 dated
15.05.14 ift Rosenheim
3
AWS 75 BS.HI
Tilt and turn window with two fixed sidelights:
Casement dimensions: 2,750 mm x 2,148 mm Frame dimensions: 1,400 mm x 2,000 mm
Test report 101 33177
dated 02.08.10 ift Rosenheim
3
AWS 75 BS.HI
Tilt and turn window with fixed sidelight:
Casement dimensions: 1,300 mm x 1,800 mm Frame dimensions: 2,320 mm x 1,878 mm
Test report 101 30951/14 dated 29.09.06 ift Rosenheim
3
AWS 75 BS.SI
Tilt and turn window:
Frame dimensions: 1,566 mm x 2,066 mm
Expert statement
10-001328-PR09
dated 06.05.13 ift Rosenheim
2
ift-System Passpoert Windows as per EN 14351-1 Page 38 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.21
Resistance to repeated
opening and closing
(3)
AWS 75.SI+, AWS 75 BS.HI+, AWS 75 BS.SI+
Double windows of overlapping design (open-ing meeting stiles)
Expert statement 13-000001
PR07 to PR12 dated June
2013 ift Rosenheim
up to 3
Extrapolation for –100% of overall test specimen area subject to conformity with maximum casement weight as tested.
4.22
Behaviour be-tween
different climates
- - npd -
4.23
Burglar resistance
AWS 75.SI / AWS 75 BS.HI, TipTronic AWS 75 SI, TipTronic AWS 75 BS.HI
Attack side: Closing side / closing face as per DIN 107
Glazing: Class P4A as per DIN EN 356 : 2000-02
Types of burglar resistant double windows as per annexes of expert statement, for hard-ware system of burglar resistant fittings refer to Annex 1 of referenced expert statement
Expert statement
211 23753/2 dated 03.07.06 ift Rosenheim
WK 2 see expert statement and/or ENV 1627:1999
AWS 75.SI / AWS 75 BS.HI
Attack side: Closing side / closing face as per DIN 107
Glazing: Class P5A as per DIN EN 356 : 2000-02
Hardware: security locking devices SCHÜCO No. 227036 and 228500 (BS series) and se-curity lock SCHÜCO No. 214863
for further details refer to Annex of expert statement
Type of burglar resistant double windows as per annexes of expert statement
Expert statement
211 24308/1 dated 12.09.06 ift Rosenheim
WK 3 see expert statement and/or ENV 1627:1999
ift-System Passpoert Windows as per EN 14351-1 Page 39 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
Types of opening: Side-hung, tilt and turn of overlapping design (opening meeting stiles)
Clause of product standard 14351-1
Variant / Type / Design Evidence of Performance
Value / Class Scope
4.23
Burglar resistance
AWS.75 SI+, AWS RL.SI+, AWS 75 BS.SI+, AWS 75 WF.SI+, AWS 75 BS.HI+, AWS 75 WF.HI+, AWS 75 VV.SI+
For further details, refer to Annex to the ex-pert statement
Design of burglar-resistent 2-winged windows according to annex in expert statement
Expert statement
15-002426-PR02 dated 14.10.2016
RC 2 / RC 2N see expert statement and/or ENV 1627:2011
AWS.75.SI+, AWS 75 RL.SI+, AWS 75 BS.HI+, AWS 75 WF.HI+
For further details, refer to Annex to the ex-pert statement
Design of burglar-resistent 2-winged windows according to annex in expert statement
Expert statement
15-002426-PR03 dated 14.10.2016
RC 3 see expert statement and/or ENV 1627:2011
ift-System Passpoert Windows as per EN 14351-1 Page 40 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
3 Performance characteristics according to the product standard
3.1 General
Depending on the intended use and the national requirements for windows and external pedestrian doorsets, an
initial type test shall be conducted for verification of the characteristics listed in product standard EN 14351-1,
Clause 4. As set out by the product standard, the relevant performance characteristic can be demonstrated on
the basis of tests, calculation, tabulated values or by evaluation.
The following summarizes the relevant evidence for all performance characteristics set out by the product
standard Clause 4 for the respective product families. Superscripts are explained in Section 5.
3.2 Resistance to wind load (refer to EN 14351-1, Clause 4.2)
Tests on windows and external pedestrian doorsets shall be carried out in accordance with EN 12211. The code
letter C refers to the maximum permissible frontal deflection of less than l/300, and the code letter B refers to
maximum permissible frontal deflection of less than l/200 in accordance with Table 2 of EN 12210. The number
following the Code Letter refers to the nominal wind load of the achieved class in accordance with Table 1 of EN
12210. The deflection of frame elements (e.g. mullions, transoms or casement members) shall be verified by
calculation or by test (reference method).
The results shall be expressed in accordance with EN 12210. The air permeability tests and classification referred
to in EN 12210 shall be in accordance with 4.14 as per EN 14351-1.
3.3 Resistance to snow and permanent load (refer to EN 14351-1, Clause 4.3)
The manufacturer shall provide sufficient information on the infill (panel) to enable the determination of the load-
bearing capacity of the infill, e.g. details of thickness and type of glass.
3.4 Fire characteristics
3.4.1 Reaction to fire (refer to EN 14351-1, Clause 4.4.1)
The (materials used in) roof windows shall be tested and classified in accordance with EN 13501-1 and Annex H
for the selection, preparation, mounting and fixing and field of direct application of the roof windows..
3.4.2 External fire performance (refer to EN 14351-1, Clause 4.4.2)
Roof windows shall be tested and classified in accordance with EN 13501-5.
3.5 Watertightness (refer to EN 14351-1, Clause 4.5)
A watertightness test shall be carried out in accordance with EN 1027. The results shall be expressed in
accordance with EN 12208.
3.6 Dangerous substances (refer to EN 14351-1, Clause 4.6)
In so far as the state of the art permits, the manufacturer shall establish those materials in the product which are
liable to emission or migration during normal intended use and for which emission or migration into the
environment is potentially dangerous to hygiene, health or the environment. The manufacturer shall establish
and present the appropriate declaration of content according to the legal requirements in the intended country of
destination.
ift-System Passpoert Windows as per EN 14351-1 Page 41 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
3.7 Impact resistance (refer to EN 14351-1, Clause 4.7)
Windows and external pedestrian doorsets fitted with glass or other fragmental material shall be tested and the
results shall be expressed in accordance with EN 13049. Where relevant, the test shall be carried out from both
sides.
3.8 Load-bearing capacity of safety devices (refer to EN 14351-1, Clause 4.8)
Safety devices (e.g. retaining and reversing catches, restrictors, and fixing devices for cleaning procedures), if
provided and engaged in accordance with the manufacturer's published instructions, shall be able to hold the
leaf, casement or sash in place for 60 s when 350 N are applied to the leaf, casement or sash in the most
unfavourable way (i.e. position, direction). This threshold strength shall be demonstrated by means of tests
carried out as described in EN 14609 or EN 948 (reference methods), or by calculation.
3.9 Height and width of doorsets and French windows/casement doors (refer to EN 14351-1,
Clause 4.9)
The clear opening height and width of external pedestrian doorsets and French windows/casement doors (see
EN 12519:2004, 3.1) shall be expressed in mm.
3.10 Ability to release (refer to EN 14351-1, Clause 4.10)
Emergency exit devices and panic devices installed on external pedestrian doorsets in escape routes shall
comply with EN 179, EN 1125, prEN 13633 or prEN 13637.
Doorsets intended for escape routes shall be identified as such with the appropriate class according to Table 2.
3.11 Acoustic performance (refer to EN 14351-1, Clause 4.11)
The sound reduction index shall be determined in accordance with EN ISO 140-3 (reference method) or for
specific window types in accordance with Annex B. The test results shall be evaluated in accordance with EN
ISO 717-1.
3.12 Thermal transmittance (refer to EN 14351-1, Clause 4.12)
The thermal transmittance for windows and external pedestrian doorsets shall be determined by using:
- EN ISO 10077-1:2006, Table F.1 Thermal transmittances for vertical windows with fraction of the frame area
30 % of the whole window area and common types of glazing spacer bars or EN ISO 10077-1:2006, Table
F.3. Thermal transmittances for vertical windows with fraction of the frame area 30 % of the whole window
area, glazing spacer bars with improved thermal performance and, for windows with bars, Annex J
or by calculation using:
- EN ISO 10077-1 or
- EN ISO 10077-1 and EN ISO 10077-2
or by hot box method using:
- EN ISO 12567-1 or
- EN ISO 12567-2
as appropriate.
Calculation previously performed in accordance with EN ISO 10077-1:2000 and tabulated values in accordance
with EN ISO 10077-1:2000, Table F.1, may be taken into account with an addition of 0.1W/(m²*K).
EN ISO 12567-1 shall be used as reference method for windows and external pedestrian doorsets and
EN ISO 12567-2 as reference method for roof windows.
The collective symbols for thermal transmittance are Uw for windows and UD for doorsets, i.e. the symbol Ust
used in EN ISO 12567-1 is equivalent to UW or UD and the symbol Um used in EN ISO 12567-2 is equivalent to
UW.
ift-System Passpoert Windows as per EN 14351-1 Page 42 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
3.13 Radiation properties (refer to EN 14351-1, Clause 4.13)
The determination of the total solar energy transmittance (g-value) and light transmittance of translucent glazing
shall be carried out in accordance with EN 410, or if relevant, with EN 13363-1 or EN 13363-2 (reference
method).
3.14 Air permeability (refer to EN 14351-1, Clause 4.14)
Two air permeability tests shall be carried out in accordance with EN 1026 (reference method), one with positive
test pressures and one with negative test pressures.
The tests for air permeability of screens shall be carried out on the screen or on its individual parts including
joints between the individual parts. In the latter case the air permeability of the screen shall be calculated as the
sum of the air permeability of the individual parts and the joints.
The test result, defined as the numerical average of the two air permeability values (m³/h) at each pressure step
shall be expressed in accordance with EN 12207:1999, 4.6.
Classification of products with described product characteristics can be carried out in accordance with Annex I.
3.15 Durability (refer to EN 14351-1, Clause 4.15)
The manufacturer shall provide information about maintenance and the replaceable parts.
3.16 Operating forces (refer to EN 14351-1, Clause 4.16)
Manually operated windows shall be tested in accordance with EN 12046-1. The results shall be expressed in
accordance with EN 13115.
Manually operated external pedestrian doorsets shall be tested in accordance with EN 12046-2. The results shall be
expressed in accordance with EN 12217.
3.17 Mechanical strength (refer to EN 14351-1, Clause 4.17)
Windows shall be tested in accordance with EN 14608 and EN 14609. Prior to and after those tests manually
operated windows shall be tested in accordance with EN 12046-1. The results shall be expressed in accordance
with EN 13115.
External pedestrian doorsets shall be tested in accordance with EN 947, EN 948, EN 949 and EN 950. The
results shall be expressed in accordance with EN 1192.
3.18 Ventilation (refer to EN 14351-1, Clause 4.18)
Air transfer devices integrated in a window shall be tested and evaluated in accordance with EN 13141-1, 4.1.
Joints and openings not subject to testing shall be taped over.
3.19 Bullet resistance (refer to EN 14351-1, Clause 4.19)
After testing in accordance with EN 1523 the bullet resistant characteristics of windows and external pedestrian
doorsets shall be expressed in accordance with EN 1522.
3.20 Explosion resistance (refer to EN 14351-1, Clause 4.20)
3.20.1 Shock tube
After testing in accordance with EN 13124-1 the explosion resistant characteristics of windows and external
pedestrian doorsets shall be expressed in accordance with EN 13123-1.
3.20.2 Range test
After testing in accordance with EN 13124-2 the explosion resistant characteristics of windows and external
pedestrian doorsets shall be expressed in accordance with EN 13123-2.
ift-System Passpoert Windows as per EN 14351-1 Page 43 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
3.21 Resistance to repeated opening and closing(refer to EN 14351-1, Clause 4.21)
A repeated opening and closing test shall be carried out in accordance with EN 1191. The results shall be
expressed in accordance with EN 12400.
3.22 Behaviour between different climates (refer to EN 14351-1, Clause 4.22)
A climate test on windows with frames manufactured from a combination of materials shall be carried out in
accordance with ENV 13420.
A climate test on external pedestrian doorsets shall be carried out in accordance with EN 1121. The results shall
be expressed in accordance with EN 12219.
3.23 Burglar resistance (refer to EN 14351-1, Clause 4.23)
After testing in accordance with ENV 1628, ENV 1629 and ENV 1630 the results shall be expressed in
accordance with ENV 1627.
3.24 Special requirements (refer to EN 14351-1, Clause 4.24)
3.24.1 Unframed glass doorsets (refer to EN 14351-1, Clause 4.24.1)
Glass in unframed glass doorsets shall comply with EN 1863-2, EN 12150-2, EN ISO 12543-2, EN 14179-2 or
EN 14321-2.
3.24.2 Power operated windows(refer to EN 14351-1, Clauses 4.24.2.1 and 4.24.2.2)
ift-System Passpoert Windows as per EN 14351-1 Page 44 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
4 General instructions for the ift System Passport
4.1 Specified performance characteristics according to the product standard
All listed performance characteristics were tested and evaluated to the test and classifications standards
contained in the product standard EN 14351-1. They are based on the evidence of performance/reports
presented by the client. For more detailed information refer to the respective individual evidence of
performance/test reports referring to the performance characteristics listed in Section 2.
4.2 Basis of the ift system passport
• Existing certification contract concluded between the ift and the client
(system supplier),
• Continuous audit/surveillance of client (system supplier),
• Established and maintained factory production control (FPC) system as set out by the
standards.
The ift Rosenheim shall be notified immediately of any system changes.
ift-System Passpoert Windows as per EN 14351-1 Page 45 of 45
No. 12-001465-PR09 (SP-A01-Z054-en-03) dated 24.01.2017 Client SCHÜCO International KG, 33609 Bielefeld (Germany)
Superscripts see Section 5
5 Special instructions for use
The special instructions for use listed in the following are rules for applying the different performance
characteristics specified by the standard. They are based on the normative provisions and the
experience of the ift Rosenheim.
As set out by the product standard the manufacturer is responsible for ensuring conformity to the
declared characteristics. Durability of the window system was not object of testing/inspection. It shall
be ensured for the specified service life of the product by using appropriate state of the art materials
and finishes, to maintain the performance characteristics.
The overview given in this product passport is based on the evidence provided. No legal claim can be
derived from this.
This system passport forms the basis for obtaining the ift Certificate of Conformity, which documents
the conformity of the finished products and of the factory quality/production control by regular third-
party audits of the manufacturers, conducted by the ift Rosenheim.
The identified characteristics (classifications) are applicable to windows and screens for installation in
vertical wall apertures covered by the scope of application of EN 14351-1. Application is subject to the
relevant national rules and regulations.
As set out by the Regulation (EC) No. 842/2006 of the European Parliament and of the Council of 17
May 2006 on certain fluorinated greenhouse gases, insulating glass units filled with Argon / SF6 are
not allowed to be placed on the market as of 4 July 2007 or 04 July 2008, respectively.
The rules for the interchangeability of window hardware are defined in the ift Certification Schemes
for hardware (QM 328, QM 345, QM 346, QM 347, QM 348)
Super-
scripts
(1) The structural properties of thermal break profiles shall be taken into account. Mullion and
transom profile sections shall be dimensioned adequately on the basis of structural engi-
neering/calculation.
(2) Acoustic performance: application to tested designs
(3) "Impact resistance", "Mechanical strength" and "Resistance to repeated opening and clos-
ing" were tested on single window units. The design of the units allows to apply these per-
formance characteristics also to double windows of overlapping design (opening meeting
stiles). Design and details of type and mode of fixing the hardware parts to the overlap area
shall be in analogy to the tested single window variant. Observe the field of direct applica-
tion set out by EN 14351-1.
ift Rosenheim