iller-stephensonchemicalcompany,foundedin1955,provides ... · 2019. 8. 9. · krytox ® oils and...

miller-stephenson chemical company, inc.

George Washington Highway, Danbury, Connecticut USA - Established in 1955

iller-Stephenson Chemical Company, founded in 1955, provides

quality chemical products for a wide range of industries worldwide. We are

committed to providing customers with superior customer service, delivery

and technical support to ensure successful product applications.

We maintain four facilities throughout the United States and Canada to ensure

prompt service and delivery. Distribution outside North America is handled

through authorized distributors.

We hope this catalog is informative in selecting the right chemical for your

application. If you have any questions, feel free to contact our Technical

Service Department regarding your applications.

m

ms

Solvent Cleaners 2 - 6Flux Removers 7 - 8Contact Cleaners / Lubricants 9Media Head Cleaner 10Cleaner for Plastic, Glass & Metal 10

Conformal Coatings 18 - 22Conformal Coating Stripping Agents 23Conductive Coating 23

Release Agents/ Dry Lubricants 26 - 34

EPON™ Resins 36 - 41Curing Agents 36 - 41Modifiers 36 - 41Additives 36 - 41Epoxy Adhesive System 42Epoxy Stripping Agent 42

Krytox® Oils and Greases 44 - 50

Connector Lubricants 13Freeze Agents / Coolants (Quik-Freeze®) 14Dusters (Aero-Duster®) 14Cutting & Drilling Fluid 15Aerosol Accessories (Cobra® Series) 15 - 16

Table of Contents

SOLVENTS & CLEANERS

CONFORMAL COATINGS / PROTECTIVE COATINGS

RELEASE AGENTS / DRY LUBRICANTS

EPOXY RESINS

KRYTOX®

FLUORINATED LUBRICANTS

SPECIALTY PRODUCTS

GOVERNMENT, MILITARY, NSN & OTHER SPECIFICATIONS 51 - 52

PRODUCT INDEX 53 - 54

TECHNICAL SUPPORT / SALES OFFICES 56

ms


Page

Solvent Cleaners

Flux Removers

Contact Cleaners

Media Head Cleaner

Specialty Cleaner

SOLVENTS

& CLEANERS

2

3

ms

Solvent Application Guide

MS-580 MS-582

MS-720 MS-722

MS-780 MS-782

MS-550 MS-552

MS-750 MS-752

MS-755 MS-757

MS-555 MS-557

MS-765 MS-767

MS-745 MS-747

MS-770 MS-772

MS-795 MS-797

MS-725 MS-727

MS-530 MS-532

MS-730 MS-732

MS-700 MS-702

4

4

4

4

5

5,7

5,7

6

6

7

8

8

9

9

10

Particulate Light Oils Oil & Lube & Grease Oxides Silicone Removers Agents ServiceProduct Name

Heavy Oil Flux Rinsing OxygenPage

All solvent cleaners are not alike.

What do we mean by this statement? Simply, not all industrial cleaners have kept pace with the increasing demands forpurity in high technology industries. As electronic systems have become smaller and more complex, chemical purity hasbecome even more critical.

For years we’ve recognized high purity industrial cleaning as a vital link in maintaining component and system reliability.Here’s what we’ve done to make sure Miller-Stephenson spray cleaners can help achieve the system integrity you need.

Purity comes first!

We use only the highest grade manufacturer-certified solvents and nonflammable propellants. In laboratory testing, Miller-Stephenson spray cleaners contain the lowest residues in the industry - some approaching 5-7 parts per million. The gen-eral industry range is 50-130 ppm.

Attention - filters at work.We triple filter our solvents and propellants for the highest purity level available with today’s technology. The filtered prod-uct goes directly into special containers eliminating any possibility of contamination.

We’re fussy about our work environment.Our production facility is immaculate and well maintained to insure the quality and purity of our products. We include theuse of smocks, caps, foot coverings and special air filters.

Why do we tell you all this?Because we believe no other spray cleaner already on the market meets these purity standards. We think the rigid stan-dards we demand of our products will help you meet your own high level of safety and reliability.

-- FFoorr IInndduussttrriiaall UUssee OOnnllyy --

(Aerosol) (Bulk)

ms

Precision Cleaning Solvent

MS-580

Nonflammable

Precision Cleaning SolventIdeal for Light Contaminants and OilsMS-580 (14 oz Aerosol)MS-582 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable and economical precision cleaning solvent for critical cleaning of electronic components, circuits,precision instruments, electrical contacts, relays and switching devices. Removes oils, oxidation and operating ero-sion dust. Evaporates quickly. Leaves no residue. No ODC (ozone depleting chemicals). See Note 1.

Precision Cleaning AgentFor Light Contaminants and OilsMS-720 (16 oz Aerosol)MS-720M (8 oz Aerosol)MS-722 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A precision cleaning agent containing a Hydrofluoroether (HFE). Safely and quickly cleans electronic components andcircuits, precision instruments, switches, relays and contacts. Removes oils, oxidation and operating erosion dust.Safe for most plastics including acrylic, polycarbonate, polystyrene and ABS. Safe for most elastomers and metalsincluding zinc and magnesium. Leaves no residue. No ODC (ozone depleting chemicals). NSN 6850-01-519-1819(16 oz Aerosol)

Vertrel® XF Cleaning AgentFor Light Fluorinated Oils, Particulate Matter and Rinsing. Cleaning Agent for Oxygen Service. MS-780 (16 oz Aerosol)MS-780M (8 oz Aerosol)MS-782 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A very mild, nonflammable solvent. Excellent compatibility with most plastics. Typical applications include: cleaningand rinsing, drying, particulate removal, fluorocarbon lubricant carrier, heat transfer, oxygen service and replacementfor many HCFC and PFC. Unique physical properties include a high boiling point and low surface tension. Ideal for abroad range of applications. No ODC (ozone depleting chemicals). NSN 6850-01-460-4914 (16 oz Aerosol).

Cleaning Solvent & Flux RemoverIdeal for Oils, Flux and ParticulatesMS-550 (14 oz Aerosol)MS-552 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A strong, nonflammable and economical solvent, well suited for the removal of oils, flux and particulate matter fromcomplex assemblies. Similar in application to MS-580, with enhanced solvency power. Evaporates quickly. Leavesno residue. No ODC (ozone depleting chemicals). See Note 1.

4

Solven

t Applicatio

n Guide / S

olven

t Clean

ers

www.miller-stephenson.com / e-mail: [email protected] Place Order or for Technical Information Call 203.743.4447

Note 1: Will attack any Acrylic based plastic (Lucite®), polycarbonates (Lexan®), polystyrene and its’ copolymers (ABS) and cellulose acetate.

Vertrel® is a Registered Trademark of DuPont Lexan® is a Registered Trademark of SABIC Innovative Plastics.Lucite® is a Registered Trademark of Lucite International, Inc.

Solvent Cleaners

NOODC

NOODC

NOODC

NOODC

- For Industrial Use Only -

MostEconomical

MostEconomical

Nonflammable

Nonflammable

FlammableFlammable

Nonflammable

ms

Cleaning Solvent

MS-550

ms

Precision Cleaning

Agent

MS-720

ms

Vertrel XF Cleaning

Agent

MS-780

ms

Vertrel® SMT Heavy Duty Solvent & Flux RemoverRemoves Organic Flux, Ionic Salts, Oils & GreasesMS-755 (16 oz Aerosol)MS-755M (8 oz Aerosol)MS-757 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable, heavy duty solvent flux remover ideally suited for ionic salts and flux residues from electronic assem-blies. Can also be used for precision and general industrial cleaning where enhanced solvency is required to removeheavy soils, such as mineral oil, vacuum fluids, wax and heavy grease. Vertrel® SMT is an azeotrope-like blend ofVertrel® XF with trans-1,2-dichloroethylene and methanol. It can replace trichloroethane, trichloroethylene andhydrochlorofluorocarbon (HCFC) fluids in many applications. No ODC (ozone depleting chemicals). See Note 1. NSN6850-01-521-5719 (16 oz Aerosol)

5 -- FFoorr IInndduussttrriiaall UUssee OOnnllyy --

Vertrel® MCA Cleaning AgentRemoves Heavy Oils, Greases and Lubricants. Cleaning Agent for Oxygen ServiceMS-750 (16 oz Aerosol)MS-750M (8 oz Aerosol)MS-752 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable, azeotrope of Vertrel® XF with trans-1,2-dichloroethylene. Its enhanced solvency power, compared toVertrel® XF, makes it particularly effective for difficult soil conditions. It maintains excellent compatibility with most plastics,ceramics and metals. Can replace trichloroethane, trichloroethylene and hydrochlorofluorocarbons (HCFC’s) in manyapplications. Unique properties include low surface tension, low viscosity and broad solvency range. Ideal for the use invapor degreasing equipment and as a cleaning agent for oxygen service. No ODC (ozone depleting chemicals). See Note 1.

NOODC

Heavy Duty Solvent & Flux RemoverRemoves Organic Flux, Ionic Salts and OilMS-555 (14 oz Aerosol)MS-557 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

Our most aggressive flux remover. A nonflammable economical and superior solvent for flux removal and heavy duty clean-ing. Suitable for removing oil, ionic salts and particulate matter. Removes all types of organic flux. Excellent for spot fluxremoval. Ideal for field service, production and prototype work. Evaporates quickly and leaves no residue. No ODC (ozonedepleting chemicals). See Note 1.

MostEconomical

Nonflammable

NOODCNonflammable

NOODCNonflammable

Solven

t Clean

ers

6

Note 1: Will attack any Acrylic based plastic (Lucite®), polycarbonates(Lexan®), polystyrene and its’ copolymers (ABS) and cellulose acetate.

Vertrel® XSi Silicone SolventSolvent for Silicone Oils & GreasesMS-745 (16 oz Aerosol)MS-745M (8 oz Aerosol)MS-747 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A blend of Vertrel® XF and hexamethyldisiloxane. It is ideally suited for use in industrial and medical applications asa solvent for silicone oil based lubricants and also as a swelling media for silicone rubber tubing. It can replace flu-ids like hexane and 1,1,1-TCA. No ODC (ozone depleting chemicals).

NOODC


Vertrel® XM Cleaning AgentRemoves Ionic Salts, Light Oils and ParticulatesMS-765 (16 oz Aerosol)MS-765M (8 oz Aerosol)MS-767 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable, azeotrope of Vertrel® XF with methanol. It offers improved solvency for polar soils compared toVertrel® XF, while maintaining excellent compatibility with most plastics, ceramics and metals. It is ideally suited for pre-cision and specialty cleaning and rinsing. Removes particulate matter, light oils, fingerprints and light ionic soils frommetal, plastic and glass. It can replace hydrochlorofluorocarbons (HCFCs) in many applications. Unique propertiesinclude high density, low viscosity, and low-surface tension for effective particle and soil removal. Ideal for use in vapordegreasing equipment. No ODC (ozone depleting chemicals).

NOODCNonflammable

ms

Vertrel MCA Cleaning

Agent

MS-750

ms

Vertrel XSiSilicone Solvent

MS-745

ms

Vertrel XM Cleaning

Agent

MS-765

ms

Vertrel® SMT Heavy Duty

Solvent & Flux Remover

MS-755

ms

Heavy DutySolvent & Flux

Remover

MS-555

Vertrel® SDG Specialty FluidRemoves Oils, Greases, Waxes and Hydraulic Fluids(Qt, Gal, 5G, 55G)

A nonflammable mixture of hydrofluorocarbons (HFCs) and trans-1,2-dichloroethylene. A precision cleaner that hasexcellent solvency for a wide range of soils including oils, greases, waxes, hydraulic fluids and silicone grease. It iscompatible with most plastics, elastomers and metals. Evaporates quickly and leaves no residue. The high solven-cy power, low surface tension and nonflammable properties make it an ideal ultrasonic vapor degreasing solvent. NoODC (ozone depleting chemicals).

NOODCNonflammable

7

Note 1: Will attack any Acrylic based plastic (Lucite®), polycarbonates(Lexan®), polystyrene and its’ copolymers (ABS) and cellulose acetate.

Note 2: Solvent may attack PET, ABS, acrylic and polycarbonate.

ms


Vertrel® SMT Heavy Duty Solvent & Flux RemoverRemoves Organic Flux, Heavy Oils, Greases & LubricantsMS-755 (16 oz Aerosol)MS-755M (8 oz Aerosol)MS-757 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable, heavy duty solvent flux remover ideally suited for ionic salts and flux residues from electronic assem-blies. Can also be used for precision and general industrial cleaning where enhanced solvency is required to removeheavy soils, such as mineral oil, vacuum fluids, wax and heavy grease. Vertrel® SMT is an azeotrope-like blend ofVertrel® XF with trans-1,2-dichloroethylene and methanol. It can replace trichloroethane, trichloroethylene andhydrochlorofluorocarbon (HCFC) fluids in many applications. No ODC (ozone depleting chemicals). See Note 1. NSN6850-01-521-5719 (16 oz Aerosol)

Heavy Duty Solvent & Flux RemoverRemoves Organic Flux, Ionic Salts and OilMS-555 (14 oz Aerosol)MS-557 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

Our most aggressive flux remover. A nonflammable economical and superior solvent for flux removal and heavy duty clean-ing. Suitable for removing oil, ionic salts and particulate matter. Removes all types of organic flux. Excellent for spot fluxremoval. Ideal for field service, production and prototype work. Evaporates quickly and leaves no residue. No ODC (ozonedepleting chemicals). See Note 1.

Vertrel® MCA Plus - Heavy Duty Solvent & Flux RemoverRemoves Organic Flux, Heavy Oils, Greases and LubricantsMS-770 (16 oz Aerosol)MS-770M (8 oz Aerosol)MS-772 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable, azeotrope-like blend of Vertrel® XF with trans-1,2-dichloroethylene and cyclopentane. Its enhanced sol-vency power makes it particularly effective in difficult soil conditions such as precision cleaning of metals, removal of heavyoil, grease, wax, vacuum fluids and difficult soils. It replaces trichloroethane, trichloroethylene and hydrochlorofluorocar-bons (HCFCs) in many applications. Unique properties include low surface tension, low viscosity and has a broad solven-cy range. Ideal for use in vapor degreasing equipment. No ODC (ozone depleting chemicals). See Note 1.

Flux Removers

MostEconomical

NOODCNonflammable

NOODCNonflammable

NOODCNonflammable

Vertrel® XMS Plus - Heavy Duty Solvent & Flux RemoverRemoves Organic Flux, Oils, Greases and Ionic SoilsMS-795 (16 oz Aerosol)MS-795M (8 oz Aerosol)MS-797 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

Vertrel® XMS Plus is a nonflammable, proprietary azeotrope-like blend of Vertrel® XF hydrofluorocarbon with trans-1,2-dichloroethylene, cyclopentane and methanol. It is suited for use in vapor degreasing equipment with a wide range ofsolvency power for cleaning ionic soils and flux residues from electronic assemblies. No ODC (ozone depleting chem-icals). See Note 2.

Flux Removers

Heavy Duty Solvent & Flux RemoverRemoves Organic Flux, Heavy Oils, Greases and WaxesMS-725 (16 oz Aerosol)MS-725M (8 oz Aerosol)MS-727 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A strong nonflammable cleaning agent containing a Hydrofluoroether azeotrope, ideally suited for removal of rosin,organic flux, oils, grease and waxes. Can also be used for precision and specialty cleaning. When used in bulk form,low surface tension, nonflammability and constant composition during boiling make this product highly suitable forimmersion and vapor degreasing equipment. No ODC (ozone depleting chemicals). See Note 2.

8

NOODCNonflammable

NOODCNonflammable

ms

Vertrel® XMS Heavy Duty


MS-795

ms


Remover

MS-555

ms


Remover

MS-725

ms

Vertrel® MCA Heavy Duty


MS-770

ms

Vertrel® SMT Heavy Duty


MS-755

Vertrel® SFR Specialty FluidRemoves fluxes used in lead free and no clean solders(Qt, Gal, 5G, 55G)

A nonflammable mixture of hydrofluorocarbons (HFCs) and trans-1,2-dichloroethylene. It is designed to remove hightemperature fluxes used in lead free and no clean solders. It has excellent solvency power for a wide range of conta-minates including ionic soils. It is compatible with most plastics, elastomers and metals. Evaporates quickly andleaves no residue. The lower surface tension and nonflammable properties make it an ideal ultrasonic vapor degreas-er solvent. No ODC (ozone depleting chemicals).

NOODCNonflammable

Contact LubricantsContact Re-Nu® & LubeCleans and LubricatesMS-538 (14 oz Aerosol)MS-539 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable cleaning and lubricating agent that restores electrical and mechanical continuity to all types of contacts andswitches. Contains a high performance synthetic hydrocarbon oil. Excellent for relays, tuners, encoders, slide wires,rheostats, distribution panels, servomechanisms and switching devices. Safe for most plastics. No ODC (ozone depletingchemicals). For lubricating multi-pin connectors, use MS-381HC Connector Lubricant.

Contact Re-Nu® & LubeCleans and LubricatesMS-738 (16 oz Aerosol)MS-738M (8 oz Aerosol)MS-739 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable, plastic safe cleaning and lubricating agent that restores electrical and mechanical continuity to all types ofcontacts and switches. Contains a high performance fluorinated synthetic oil in a hydrofluoroether (HFE) solvent. Excellentfor relays, tuners, encoders, slide wires, rheostats, distribution panels, servomechanisms and switching devices. No ODC(ozone depleting chemicals). For lubricating multi-pin connectors, use MS-381HC Connector Lubricant.

Solvents dispensed withCobra® Brush. See Page 15

Contact CleanersContact Re-Nu®Removes Oxides, Oil, Grease and ContaminantsMS-530 (14 oz Aerosol)MS-532 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable and economical cleaning agent that restores electrical or mechanical continuity on all types of contacts.Removes oxides, oil, grease and dust from electrical contacts, relays, encoders, slide wires, rheostats, distribution panelsand switching devices. Evaporates quickly and leaves no residue. No ODC (ozone depleting chemicals). See Note 1.

Contact Re-Nu®Removes Oxides, Oils and ContaminantsMS-730 (16 oz Aerosol)MS-730M (8 oz Aerosol)MS-732 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

Contact Re-Nu® is an odorless cleaning agent that restores electrical and mechanical continuity to all types of contactsincluding: connectors, relays, tuners, encoders, slide wires, rheostats, distribution panels, servomechanisms and switchingdevices. It is a plastic safe, nonflammable blend containing a hydrofluoroether (HFE). Leaves no residue. No ODC (ozonedepleting chemicals). NSN 6850-01-519-1815 (16 oz Aerosol)

9

MostEconomical

MostEconomical

NOODCNonflammable

NOODCNonflammable

NOODCNonflammable

NOODCNonflammable

Note 1: Will attack any Acrylic based plastic (Lucite®), polycarbonates (Lexan®), polystyrene and its’ copoly-mers (ABS) and cellulose acetate.

ms

Contact Re-Nu®

MS-530

ms

Contact Re-Nu®

MS-730

ms

ContactRe-Nu®

& Lube

MS-738

10

Plexiglas® is a Registered Trademark of Altuglas International.

Contact C

leaners / M

edia H

ead Clean

er / Specialty C

leaner

Media Head CleanerMedia Head CleanerMS-700 (16 oz Aerosol)MS-700M (8 oz Aerosol)MS-702 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

A nonflammable blend containing a hydrofluoroether (HFE). Removes contaminants and oxide buildup on magnetictape systems, memory systems and read/write heads. Head wear is reduced and head life is extended. Compatiblewith most plastics. No ODC (ozone depleting chemicals).

Plastic, Glass & Metal Cleaner Safezone Cleaner for Plastic, Glass & MetalMS-260 (16 oz Aerosol)MS-260M (8 oz Pump)MS-262 (4 oz, 8 oz, Qt, Gal, 5G)

A high quality cleaner especially suitable for non-streak cleaning of glass, metal, ceramic, polycarbonate, acrylic andplastic - including Plexiglas®. Excellent for use on dials, gauges and oscilloscopes. Also recommended for aircraftwindshields. Contains no ammonia. No ODC (ozone depleting chemicals). NSN 7930-01-064-5179 (Aerosol)

Non-streaking


For the latest product information,be sure to visit us at...

www.miller-stephenson.com

NOODCNonflammable

NOODCNonflammable

ms

MediaHead Cleaner

MS-700

ms

Plastic, Glass& Metal Cleaner

MS-260

Contact Re-Nu® is a Registered Trademark of Miller-Stephenson Chemical CompanyPlexiglas® is a Registered Trademark of Rohm & Haas

Note 1: Will attack any Acrylic based plastic (Lucite), polycarbonates (Lexan), polystyrene and its’ copolymers (ABS) and cellulose acetate.

ms

11

www.miller-stephenson.comTo Place Order or for Technical Information Call 203.743.4447

Connector Lubricants

Freeze Agents / Coolants (Quik-Freeze®)

Dusters (Aero-Duster®)

Cutting & Drilling Fluid

Aerosol Accessories (Cobra® Series)

SPECIALTY PRODUCTS

12

13

ms

Connector LubricantMS-381HC (16 oz Aerosol)MS-381HCM (8 oz Aerosol)MS-383H (1 oz, 2 oz, 4 oz, 8 oz, Qt, Gal, 5G, 55G)

Cleans, lubricates and protects multi-pin connectors. Reduces insertion force, greatly increasing connection cycles. Extendsconnector life by preventing corrosion and galling. Contains a 6-ring polyphenyl ether lubricant which provides long-lastingprotection against oxidation. No interference with electrical continuity. Thermal stability to 836°F/447°C. This 6-ring PPE canprovide a 20-year film life where temperatures do not exceed 230°F/110°C. Contains no silicones and is non-migrating. Availablewith an ultraviolet (UV) indicator. Nonflammable. No ODC (ozone depleting chemicals). Custom packaging available. See Note 2.

Connector LubricantMS-381H (16 oz Aerosol)MS-381HM (8 oz Aerosol)

Same general application as MS-381HC. Contains a lower concentration of 6-ring polyphenyl ether. No ODC (ozone deplet-ing chemicals). Custom packaging available. See Note 2.

Connector LubricantMS-124H (14 oz Aerosol)MS-126H (1 oz, 2 oz, 4 oz, 8 oz, Qt, Gal, 5G, 55G)

Same general applications as Connector Lubricant, MS-381HC but with a 5-ring polyphenyl ether lubricant. Thermal stabil-ity to 600°F/316°C. This 5-ring PPE can provide a 20-year film life provided that temperatures do not exceed 140°F/60°C.Contains no silicones and is non-migrating. Available with an ultraviolet (UV) indicator. Nonflammable. No ODC (ozone deplet-ing chemicals). See Note 1.

Connector Lubricants


Custom Packaging Also Available

Note 1: Will attack any Acrylic based plastic (Lucite®), polycarbonates(Lexan®), polystyrene and its’ copolymers (ABS) and cellulose acetate.Note 2: Solvent may attack PET, ABS, acrylic and polycarbonate.

NOODCNonflammable

NOODCNonflammable

NOODCNonflammable

ms

ConnectorLubricant

MS-381H

ms

ConnectorLubricant

MS-381HC

ms

ConnectorLubricant

MS-124H

14® Registered Trademark of Miller-Stephenson Chemical Company, Inc.

Quik-Freeze®MS-242N (14 oz Aerosol)

For hot-cold intermittence testing of electronic components and protection of components during soldering. Excellentfor cooling epoxy in composite forming and reducing tack in prepreg applications. Also used for freezing biologicalspecimens. Instantly freezes small areas to -55°F/-48°C. Compatible with most plastics, rubbers and metals.Nonflammable. No ODC (ozone depleting chemicals). NSN 6850-01-333-1841

Quik-Freeze® AntistaticMS-242N-AS (14 oz Aerosol)

Same general application as MS-242N but with an antistatic agent. Helps dissipate any static charges which maybuild up during spray. Instantly freezes small areas to -40°F/-40°C. Compatible with most plastics, rubbers and met-als. Nonflammable. No ODC (ozone depleting chemicals).

Freeze Agents / Coolants

Aero-Duster ®

Aero-Duster ®MS-222N (14 oz Aerosol)MS-222T (10 oz Aerosol)MS-222F (6 oz Aerosol)

The convenient nonflammable way to remove microscopic dust. Recommended for electromechanical instruments,computer equipment, and optics. High purity. May be used with MS-228 Cobra® Duster extension for use in hard toreach areas. No ODC (ozone depleting chemicals). NSN 6850-01-346-9144 (14 oz)

Cobra®DusterSee page 16

Excellent for use on optical equipment,including fiber optics.

Connecto

r Lubrican

ts / Freeze A

gents / A

ero-Duster

®



NOODCNonflammable

NOODCNonflammable

NOODCNonflammable

15

ms

Vertrel® X-B3 Cutting & Drilling FluidT0701A (16 oz Aerosol)T0701A(M) (8 oz Aerosol)T0701B (Qt, Gal, 5G, 55G)

Developed for the aerospace industry, Vertrel® X-B3 delivers a nonflammable lubricant to the machining operation whileproviding cooling to the cutting tool and work surface. The drilling and cutting process can then be optimized for cuttingspeed, tool life and surface finish. Vertrel® X-B3's rapid volatility helps assure effective cooling along with uniform deliveryof lubricant to the cutting point. The improved cooling efficiency minimizes thermal expansion. This effect not only improvesthe ability of the cutting and high speed drilling operations to extremely close tolerances, but also improves the surface fin-ish and quality of the finished workpiece.The components of Vertrel® X-B3 are volatile, and therefore leave no cutting fluidresidues to clean after drilling. This is particularly valuable when machined surfaces must be painted or are part of a struc-ture to which sealants and protective coatings must adhere. No ODC (ozone depleting chemicals).

Cutting & Drilling Fluid

Cobra® Solvent Spray Cleaning BrushMS-226

Converts most Miller-Stephenson aerosol cleaners into an efficient, fingertip operated spot cleaning system, increasingcleaning accuracy and reducing solvent waste. NSN 7920-00-134-1998

Aerosol Accessories


NOODCNonflammable

ms

Vertrel X-B3Cutting &

Drilling Fluid

T0701A

16® Registered Trademarks of Miller-Stephenson Chemical Company, Inc.

Excellent for use on opticalequipment, including fiberoptics.

Cutting & Drillin

g Fluid

/ Aerosol Accesso

ries

MS-228 Cobra Dusterwith MS-222N Aerosol

®

Cobra® DusterMS-228

A patented aerosol accessory. When combined with the Aero-Duster®, the Cobra® Duster provides a powerful, non-contact, easy to use delivery system. Designed for critical and hard to reach areas on electronic, photographic andcomputer equipment.





ms

17

Conformal Coatings

Conformal Coating Strippers

Conductive Coating

CONFORMAL COATINGSP R O T E C T I V E C O A T I N G S

18

Conformal Coatings Protect fromAdverse Environmental Conditions

Conformal Coating with the TechnicalAdvantages of Aerosol Sprays

As protective coatings have become a more important part ofelectronic products, coating requirements have become moredemanding.

To meet these needs, Miller-Stephenson offers a choice ofconformal coatings, each formulated to a specific requirement.Whether your specification calls for urethane, silicone, acrylicor varnish, we have the coating you need in easy applicationaerosol containers and bulk packages.

Miller-Stephenson aerosol coatings offer:

Uniformity Each aerosol container provides a premixed stan-dardized coating with carefully controlled solids and solventconcentration. A two-coat spray applies a uniform coating of2 mils, providing maximum protection while allowing ease ofrepair.

Ease of Application Fingertip control directs coating spraywithout waste. No setup or cleanup of spray equipment.Handy for bench top use and field repair kits.

Removability and Repair All Miller-Stephenson coatings areremovable with MS-114C Conformal Coating Stripper.Coatings are easily “soldered through” for easy repair.

Quality Control All of our conformal coatings have an ultra-violet (UV) indicator for quality control inspection.

With UV indicator seenunder a black light.

ms


20

Urethane Conformal CoatingMS-470C (14 oz Aerosol)MS-472C (Qt, Gal, 5G, 55G)

Provides excellent chemical, moisture and fungal resistance with good dielectric properties in a “solder-through”coating. Includes an ultraviolet (UV) indicator. No ODC (ozone depleting chemicals). Base resin conforms to MIL-I-46058, Type UR.

Silicone Conformal CoatingMS-460C (14 oz Aerosol)MS-462C (Qt, Gal, 5G, 55G)

Provides excellent moisture and fungal resistance with good dielectric properties in a soft and flexible "solder-through" coating. Includes an ultraviolet (UV) indicator. Contains Dow Corning 1-2577 Silicone Resin, which conformsto MIL-I-46058, Type SR and UL Standard E81611.

Acrylic Conformal CoatingMS-465C (14 oz Aerosol)MS-467C (Qt, Gal, 5G, 55G)

A tough, abrasion resistant coating providing excellent electrical insulation against high voltage arcing and coronashorts. Dries fast, protects against caustics and corrosives. May be “soldered-through” for ease of repair. Easilyremoved by solvents. Includes an ultraviolet (UV) indicator. No ODC (ozone depleting chemicals).

Acrylic Conformal CoatingMS-475C (14 oz Aerosol)MS-477C (Qt, Gal, 5G, 55G)

Offers superior toughness and resistance to moisture and abrasion. Provides excellent insulation. May be “soldered-through” for ease of repair. Easily removed by solvents. Includes an ultraviolet (UV) indicator. No ODC (ozone depletingchemicals). Base resin conforms to MIL-I-46058, Type AR.

Protective VarnishMS-452N (Qt, Gal, 5G, 55G)

Designed for adverse environmental conditions, MS-452N provides electrical insulation, good flexibility and resis-tance to salt water, moisture and fungus. Recommended for stators, transformers, prevarnished coils, printed cir-cuits, completed electronic assemblies, junction boxes and cables. Includes an ultraviolet (UV) indicator. No ODC(ozone depleting chemicals).

NOODC

Conformal Coatings/Protective Coatings

Conformal C

oatin

gs / P

rotective C

oatin

gs


NOODCNonflammable

Nonflammable

NOODCNonflammable

NOODCNonflammable

ms

Silicone Conformal

Coating

MS-460C

ms

Urethane Conformal

Coating

MS-470C

ms

Acrylic Conformal

Coating

MS-475C

ms

Acrylic Conformal

Coating

MS-465C

21

ProtectiveVarnish

MS-452N Bulk Liquid

Acrylic Coating

MS-475C AerosolMS-477C Bulk Liquid

SpecialProperties

Excellent chemical, moisture andfungal resistance with good dielec-tric properties. May be “soldered-through” for ease of repair.Moisture cured.

Excellent moisture and fungalresistance and good dielectricproperties. Soft and flexible coat-ing. May be “soldered-through” forease of repair and replacement ofcomponents.

Tough, abrasion resistant, “sol-dered-through” coating. Excellentinsulation against high voltage arc-ing and corona shorts. Fast drying.Protects against caustics and corro-sives. Easily removed by solvents.

Superior toughness and abrasionresistance. Provides excellent insula-tion and moisture resistance. May be“soldered-through” for ease of repair.Easily removed by solvents.

Designed for adverse environmen-tal conditions. Provides electricalinsulation and moisture resistanceto increase the reliability of printedcircuit boards.

DielectricConstant

4.2 @100 KHZ

2.71@100 KHZ

3.4 @100 KHZ

2.29 @100 KHZ

---

UltravioletIndicator

Yes

Yes

Yes

Yes

Yes

Base ResinSpecification

MIL-I-46058(Type UR)

MIL-I-46058(Type SR)

UL# E81611

---

MIL-I-46058(Type AR)

---

DielectricStrength

1200Volts/Mil

1200Volts/Mil

2000Volts/Mil

2000Volts/Mil

1800Volts/Mil

BaseMaterial

UrethaneResin

SiliconeResin

AcrylicResin

AcrylicResin

Varnish

All of our coatings are clear for component identification, and provide excellent electri-cal insulation and moisture resistance. However, since the degree of electrical insula-tion, drying time, chemical resistance, weatherability, thermal shock resistance, dura-bility and repairability vary among the coatings, we have provided you with a compar-ison chart.

Properly selected, the use of a conformal protective coating can improve the perfor-mance, life, reliability and safety of your product. Use the chart below as a guide inselecting the right coating for your application.

Acrylic Coating


Silicone Resin Coating


UrethaneCoating


ms


Conformal Coating Comparison Chart

22

FungalResistance

Yes

Yes

Yes

Yes

Yes

Ease of Repair

Excellent

Excellent

Good

Excellent

Fair

MoistureResistance

Yes

Yes

Yes

Yes

Yes

Removablewith MS-114C

ConformalCoatingStripper

Yes

Yes

Yes

Yes

Yes

Coverage@ 2 mil

Thickness(14 oz

Aerosol)

8.6 sq ft

4.4 sq ft

7.6 sq ft

6.4 sq ft

N/A

OperatingTemperature

-67°F/-55°Cto

230°F/110°C

-85°F/-65°Cto

392°F/200°C

23°F/-5°Cto

176°F/80°C

-85°F/-65°Cto

230°F/110°C

-67°F/-55°Cto

311°F/155°C

Drying Time@ 77°F/25°C

30 min

60 min

10 min

30 min

30 min

Curing Time@ 77°F/25°C

5 to 7 days or 2 hrs @

140°F/60°C &30% to 50%

Relative Humidity

72 hoursor 30 min @168°F/76°C or 15 min @302°F/150°C

24 hours

24 hoursor

45 minutes @167°F/75°C

24 hours

All Miller-Stephenson conformal coatingsare removable with our Conformal CoatingStripper (MS-114C).

Conformal C

oatin

gs / P

rotective C

oatin

gs



All conformal coatings contain anultraviolet indicator for quality controlinspection procedures.

Conformal Coating StripperMS-114C (Qt, Gal, 5G, 55G)

Specifically formulated for the removal of Miller-Stephenson conformal coatings. MS-114C safely dissolves acrylic, ure-thane, silicone and varnish coatings without damage to most electronic components. Nonflammable. No ODC (ozonedepleting chemicals).

Conformal Coating StripperMS-115 (Qt, Gal, 5G, 55G)

Specifically formulated for the removal of cured epoxy conformal coatings. It will strip most organic systems and somepolyurethanes. Will not attack any metal surfaces. More aggressive than MS-114C. Nonflammable. No ODC (ozone deplet-ing chemicals).

ms

23

RFI Nickel Conductive CoatingMS-487C (Qt, Gal)

A nonflammable conductive coating that shields RFI/EMI emissions over a broad range of frequencies. Coating is dry andfunctional within minutes of application. Recommended for application on plastic cabinets and enclosures. Note: will attackany Acrylic based plastic (Lucite®), polycarbonate (Lexan®), polystyrene and its copolymers (ABS) and cellulose acetate.No ODC (ozone depleting chemicals).

Conformal Coating Stripping Agents

Conductive Coating




NOODCNonflammable

NOODCNonflammable

NOODCNonflammable

24

Conformal C

oatin

g Stripping Agents / C

onductive C

oatin

gs

RELEASE AGENTS / DRY LUBRICANTS

26

iller-Stephenson PTFE Release Agents and DryLubricants offer high quality, value and purity. In this day

of dynamic product development, Miller-Stephenson has

remained consistent, providing alternatives which meet

today’s rapidly changing needs while maintaining a bridge

to formulations of the past. During this multi-decade tran-

sition from chlorofluorocarbon carriers to friendlier ozone-

impact solutions, Miller-Stephenson continues to provide

its customers with a wide selection of alternative products

in both aerosol and bulk liquid form. We offer the best

products currently available and continue to remain

focused on the future. Meanwhile, we shall not lose sight

of our never-ending objective of providing our customers

with the quality products and services they have come to

expect.

mmmss


PTFE - The MainstayPTFE (Polytetrafluoroethylene) has been the active ingredient in our Release Agent/Dry Lubricant formulations formany years. Except for manufacturing adjustments involving ozone friendly processes, PTFE has remained virtu-ally the same and continues to be the premier release agent solution. Based on Teflon® chemistry, PTFE, in Miller-Stephenson formulations, provides suspensions of low molecular weight fluoropolymers in a variety of easy to useforms. PTFE’s outstanding lubricity and low coefficient of friction make Miller-Stephenson products not only ideal formold release applications but also for dry lubrication.

Thermal StabilityPTFE has excellent high temperature properties up to 580°F/304°C, it can be heated above its melting pointbefore appreciable decomposition begins. PTFE contains a range of molecular weights. Prolonged heatingcan cause sublimation of the lower molecular weight fractions with accompanying weight loss. The actual sublimation rate is dependent on temperature, area, and air flow. (For extreme high temperature 1562°F/850°C see Boron Nitride Release Agents on page 34.)

Chemical StabilityPTFE displays excellent chemical stability. It is completely resistant to concentrated nitric acid, concentrat-ed hydrochloric acid, 30% aqueous sodium hydroxide, and 30% alcoholic potassium hydroxide at tempera-tures of 212°F/100°C. Concentrated sulfuric acid attacks the fluorotelomer at 212°F/100°C but has no effect at room temperature.

SolubilityPTFE is essentially insoluble in all nonfluorinated solvents. Since PTFE consists of a range of molecular weights, approximately 10% of the lowest molecular weight fractions are soluble in fluorinated solvents.

WHY MILLER-STEPHENSON?Our products, with PTFE, provide distinct advantages not available from other formulations.

MULTIPLE RELEASESMiller-Stephenson mold release agents work longer, yielding more release cycles from each application. This results in higher productivity.

NO MIGRATIONThese release agents contain no silicones which can show up unexpectedly as oily residue in other work areas.

MINIMAL TRANSFERTransfer of mold release to molded parts is negligible, minimizing interference with post finishing operations such as painting, bonding or metalizing.

NO OILS OR WAXESThere is no gumming or charring; therefore, no need for harsh scraping and cleaning which can shorten mold life.

NONFLAMMABLETeflon® is a Registered Trademark of DuPont

Release A

gents / D

ry Lubrican

ts

28

ms

ReleaseAgent

Dry Lubricant

MS-122FD

ms

ReleaseAgent

Dry Lubricant

MS-122RB

ms

PTFE Release Agent

MS-136W

ms

ReleaseAgent

Dry Lubricant

MS-122AD

ms

ReleaseAgent

Dry Lubricant

MS-122RX

ms

ReleaseAgent

Dry Lubricant

MS-122AX

ms

ReleaseAgent

Dry Lubricant

MS-122XD

USED IN MANY TYPES OF MOLDSExcellent release is obtained with a variety of mold materials:• Ceramics • Plastics• Epoxies • Rubbers/Elastomers*• Metals • Urethanes

ROOM TEMPERATURE MOLDS Apply MS-122 Series or 143 Series release agents on molds up to

212°F/100°C. Molds can then be heated to 580°F/304°C.

HOT MOLDS Apply MS-136W or MS-145W on pre-heated molds above 212°F/100°C up to 550°F/285°C.

Material Selection Chart

EXCELLENT FOR COMPLEX MOLDED PARTS

Miller-Stephenson release agents have proven themselves in the most complicated and demanding molded part con-figurations imaginable. The active ingredient is PTFE, or polytetrafluoroethylene, which has an extremely low coeffi-cient of friction and, thus, imparts high lubricity and excellent nonstick properties. Distortion is virtually nonexistent - anextremely important criterion in precision molding.

mmss


Properties of PTFEMS-122, MS-143 Series MS-136W, MS-145W

Molecular Weight 3000 40,000Density (grams/cc) - 2.16Particle size (microns)

mean 3.7 Less than 0.2range 1 to 15 -

Melting Point 581°F/305°C 613°F/323°C

Release Agent on Rubber Molds

Highly Recommended

Not Recommended

Not Recommended

Recommended

Not Recommended

Recommended

Highly Recommended

Recommended

Release Agent on Non-metallic Molds

Recommended

Recommended

Recommended

Recommended

Recommended

Recommended

Recommended

Recommended

MS-122AD

MS-122AX

MS-122RB

MS-122XD

MS-143AX

MS-143E

MS-143H

MS-143XD

Release Agent on Metal Molds

Recommended

Highly Recommended

Recommended

Recommended

Highly Recommended

Recommended

Highly Recommended

Recommended

AEROSOLS

BULK LIQUID


Aerosols Bulk Liquids

Aerosols Bulk Liquids

Compression Molding

Dry Lubricant

Encapsulating

Filament Winding (Hot mandrel)

Foam Manufacturing

Injection Molding

Laminating

Masking

PC Board Manufacturing

Potting

Prepreg Fabrication

Reaction Injection Molding (RIM)

*Rubber Molding

SMC Forming

Transfer Molding

Wire Drawing

TYPICAL APPLICATIONS

Process Selection ChartMiller-Stephenson release agents and dry lubricants are versatile and are used in a variety of products and manufac-turing operations:

* Not Recommended for multiple releases from silicone rubber molds.

Release A

gents / D

ry Lubrican

ts

30

MS-122 Series MS-136 Series MS-143 Series MS-145 Series

MS-122 Series MS-136 Series MS-143 Series MS-145 Series

Room Temperature (up to 212°F/100°C)

Hot Molds (212°F/100°C to 550°F/285°C)

AerosolBrushDip

Spray GunWipe

Solvent-basedWater-based

RapidModerate

MOLD TEMPERATURE

METHOD OF APPLICATION

CARRIER

EVAPORATION RATE

Application Selection Chart

Dry Lubricant ApplicationsThe outstanding lubricity of the PTFE (polytetrafluoroethylene telomer) solids incorporated in Miller-Stephenson DryLubricants is indicated by the low coefficient of friction. The following values were determined at 23 pounds per squareinch: steel on steel, 0.11; aluminum on aluminum, 0.16; hardwood on hardwood, 0.10. All Dry Lubricants, whether pack-aged in aerosol or bulk, may be applied to the following materials:

• Metal • Ceramics • Rubber • Elastomers

• Glass • Paper • Wood • Plastics

Bulk Liquid for Brush, Dip, and Spray Gun Application

MS-143AX PTFE Release Agent/Dry Lubricant 1% Solids

MS-143 (Series) PTFE Release Agent/Dry Lubricant 3% Solids

MS-143 (Series)-Red PTFE Release Agent/Dry Lubricant 3% Solids(with Red Dye Indicator)

MS-143 (Series)-Blue PTFE Release Agent/Dry Lubricant 3% Solids(with Blue Dye Indicator)

MS-143 (Series)-15 PTFE Release Agent/Dry Lubricant 15% Solids

MS-143 (Series)-10 PTFE Release Agent/Dry Lubricant 10% Solids

MS-143 (Series)-5.0 PTFE Release Agent/Dry Lubricant 5% Solids

MS-143 (Series)-1.0 PTFE Release Agent/Dry Lubricant 1% Solids

MS-145W PTFE Release Agent 2% Solids

…Custom formulations available.

mmss


Dry Lubricant Selection Chart

Dry Lubricant for Rubber on Metal

Recommended

Highly Recommended

Recommended

Recommended

Highly Recommended

Not Recommended

Recommended

Recommended

MS-122AD

MS-122AX

MS-122RB

MS-122XD

MS-143AX

MS-143E

MS-143H

MS-143XD

Dry Lubricant for Metal on Metal

Highly Recommended

Not Recommended

Recommended

Recommended

Not Recommended

Recommended

Highly Recommended

Highly Recommended

AEROSOLS

BULK LIQUID


Release A

gents / D

ry Lubrican

ts

32

MS-122AD (14 oz Aerosol)

As a Release Agent: An excellent and economical universal release agent, highly effective when applied to rubbermolds. Provides a very uniform coating. NSN 9150-01-528-5624.As a Dry Lubricant: Our best dry lubricant, for all applications. May be used on all surfaces, especially where thereis metal on metal contact. Provides a very uniform coating. NSN 9150-01-528-5624.

MS-122AX (14 oz Aerosol) MS-143AX (Qt, Gal, 5G, 55G)

As a Release Agent: A modified version of MS-122AD that combines superior initial release action with up to 5 timesthe number of release cycles on metal molds. Provides a very uniform coating. Not recommended for use on rubbermolds.As a Dry Lubricant: An excellent dry lubricant for rubber on steel applications. Provides a very uniform coating.Not recommended as a dry lubricant for metal on metal.

Release Agents / Dry LubricantsMS-122 and MS-143 Series PTFE Release Agents/Dry Lubricants create superior releases for plastics, elastomers andresins; including acrylics, urethanes, rubber, nylons, epoxies, polycarbonates and polystyrene. Designed to give multiplereleases between applications. Recommended for applications to 580°F (304°C).To increase number of releases betweenapplications, coating may be fused at 581°F (305°C) to 590°F (310°C). Performance may vary due to mold temperaturesand mold type. As a dry lubricant, may be used on metal, glass, ceramics, rubber, elastomers, wood, paper and some plas-tics. No discernible transfer. No migration. Nonflammable. Contains no silicones. No ODC (ozone depleting chemicals).

To select the most suitable product for your application, please call our Technical Service Department (8 AM - 4 PM E.T.):800.992.2424 or 203.743.4447. In Canada, call 800.323.4621.

NOODCNonflammable

NOODCNonflammable

MostEconomical

Miller-Stephenson’s Dry Lubricants minimize “slip-stick” problems, and are most effective inlow speed, light load applications. Specific uses include:

• Wire and cable.• Thread, cord and rope.• Chain drives.• Gears and belts.• Metalworking, including extrusion, rolling, drawing and sizing.• Machine parts and tools, including nuts, bolts, thread connections, locks, power

saw blades and machine mechanisms.• Hardware, including hinges, locks and catches, window guides, and guides on

cabinet drawers.

ms

ReleaseAgent

Dry Lubricant

MS-122AD

ms

ReleaseAgent

Dry Lubricant

MS-122XD

MS-122RB (16 oz Aerosol)

As a Release Agent: Provides a heavier, slower drying coating which makes it suitable for intricate mold shapes.Works well for most applications except as a release agent on rubber molds.As a Dry Lubricant: A general purpose dry lubricant, good for all applications.

MS-122XD (14 oz Aerosol) MS-143XD (Qt, Gal, 5G, 55G)

As a Release Agent: An excellent release agent with the added advantage of superior release action in the initialcycles. Works well for all applications. Produces a uniform coating.As a Dry Lubricant: A very good general purpose dry lubricant for all applications. Produces a uniform coating.

MS-143E (Qt, Gal, 5G, 55G)

As a Release Agent: An excellent, economical, universal release agent for all applications and surfaces. It pro-duces a whiter, more visible coating than some of the other bulk formulas.As a Dry Lubricant: An excellent dry lubricant for all applications and surfaces.

MS-143H (Qt, Gal, 5G, 55G)

As a Release Agent: A fast drying mold release agent for metallic and non-metallic molds. With superior releaseaction, it will yield up to three times the number of release cycles compared to the more economical MS-143E.As a Dry Lubricant: An excellent dry lubricant for all applications and surfaces.

33

ms


For removing PTFE Release Agentsuse MS-782, See Page 4.

Nonflammable

NOODCNonflammable

NOODCNonflammable

NOODCNonflammable

ms

ReleaseAgent

Dry Lubricant

MS-122RB

ms

ReleaseAgent

Dry Lubricant

MS-122RB

ms

ReleaseAgent

Dry Lubricant

MS-122RX

ms

ReleaseAgent

Dry Lubricant

MS-122XD

MostEconomical

ms

Boron NitrideRelease AgentDry Lubricant

E0201A

34

Viton® is a Registered Trademark of DuPont.

Water Based Release Agent for Hot Molds

MS-136W (12 oz Aerosol)MS-145W (Qt, Gal, 5G, 55G)

PTFE Release Agents, MS-136W and MS-145W are ideal for elastomers, including natural and synthetic rubber,EPDM, NBR, silicone, Viton® and neoprene, and most plastics and resins. For applying to preheated molds212°F/100°C to 550°F/285°C. MS-136W and MS-145W will not activate below 212°F/100°C. For aerosol applicationswhere molds are below 212°F, use MS-122AD, RB or XD. For bulk applications where molds are below 212°F, use MS-143XD, MS-143E, MS-143H or MS-143AX. There is no discernible transfer or migration. Nonflammable. NoODC (ozone depleting chemicals).

Release A

gents / D

ry Lubrican

ts


Custom Formulations available




NOODCNonflammable

ms

PTFE Release Agent

MS-136W

Extreme High Temperature Release Agent and Dry Lubricant (Boron Nitride)

E0201A (14 oz Aerosol)E1121B (Qt, Gal, 5G, 55G)

A boron nitride based product for mold release and dry film lubrication applications. This boron nitride active ingre-dient is a fine particle size of the hexagonal form of the compound. It is naturally lubricious and stable at elevatedtemperatures (1562°F/850°C) and in aggressive environments.

An excellent surface coating for molds used to produce castings of light metals such as magnesium and for coat-ing surfaces in glass making operations.

Nonflammable

ms

35

EPON™ Resins

Curing Agents

Modifiers

Additives

Epoxy Adhesive System

Epoxy Stripping Agent

EPOXY RESINS

36

37

ms

-- FFoorr IInndduussttrriiaall uussee OOnnllyy --

EPON™ Epoxy Resins,Modifiers & Curing Agents

EPON™

EPIREZ™

EPIKURE™

HELOXY™

EPONOL™

EPONEX™

CARDURA™

38- For Industrial use Only -

EPON™Epoxy R

esins, M

odifiers &

Curing Agents

EPON™ Resins

Liquids:825826828829830834862872

Blends:813815C& others

Solids:1001F1002F1004F1007F1009F

EPON™ Resin Solutions

834-X-901001-B-801001-T-75& others

EPON™ Powder Resins

20022042

& others

EPON™ Electrical LaminatingResins

EPON™ Electronic Powders

EPONEX™

1510

Bisphenol A

BPA-157

EPON™ Composite Resins

HELOXY™ Modifiers

4861 (BGE)62 (CGE)

6871107116

CARDURA™N-10ACE™& others

EPIREZ™ Waterborne Resins

WD-5103510-W-603522-W-605003-W-55& others

EPIKURE™ WaterborneCuring Agents

8290-Y-608537-WY-60& others

EPIKURE™ Curing Agents

30463125 (V-25)3140 (V-40)3223 (DETA)3234 (TETA)

3253327132823290329533823502W

& others

Epoxy Curing Agents

DEAPAANCAMINE® K54ANCAMINE® K61 B

BDMABF3-400HHPAMHHPANMA

Versamid® 115Versamid® 125Versamid® 140

& others

Additives

CAB-O-SIL®

EPONOL™ Resins

EPON™ Novolacs

EPON™ ElastomericModified Resins

58005580065803458901& others

OOtthheerr CCuurriinnggAAggeennttss,, MMooddiiffiieerrss

aanndd AAddddiittiivveess

™ Trademarks of Hexion Specialty Chemicals, Inc.ANCAMINE® is a Registered Trademark of Air Products, Inc.CAB-O-SIL® is a Registered Trademark of Cabot Corp.VERSAMID® is a Registered Trademark of Cognis Corporation.


ms


EPON™ Epoxy Resins, Modifiers& Curing AgentsMiller-Stephenson offers a diverse line of EPON™ Resins, EPIREZ™ WaterborneResins, EPIKURE™ Curing Agents, HELOXY™ Modifiers, EPONOL™ and EPONEX™

Resins and CARDURA™ Glycidyl Esters. These products vary in chemical structure,molecular weight, viscosity and functionality, providing the formulator with a multi-tude of options. There is at least one resin system that can be used to achieve aspecific property or a combination of properties, whether it be low viscosity, chem-ical resistance, reactivity, flexibility, heat resistance or fire retardance.

AT A GLANCELiquids & Blends offer low to moderate room temperature viscosities. They havethe best balance of handling, reactivity and performance properties. EPON™

Resins, with lower viscosity, offer better wetting and higher filler acceptance. Theirmoderate viscosities offer better deflection of temperature at elevated temperaturesand in applications requiring maximum chemical resistance. EPONOL™ Resins donot require curing agents. They are excellent film formers and can provide outsand-ing surface coatings by solvent evaporation alone.

Modifiers offer improved cured system flexibility, increased peel and impactstrength, increased filler loading, improved resin wetting action and reduced vis-cosity and surface tension.

Semi-Solids & Solids have a higher molecular weight, providing reduced heatexotherm and a slight improvement in adhesion and cracking resistance.

Electrical Laminating resins include brominated resins that can be used toobtain fire retardance in a base epoxy resin formulation.

Specialties & Multifunctional resins for increased levels of heat and chemicalresistance and elastomer modified resins for increased flexibility, adhesion prop-erties and fatigue resistance.

Waterborne Systems offer flexibility and toughness with water clean-up, lowVOC’s, reduced surface preparation, application to wet surfaces, excellent sub-strate wetting and fast drying time. Waterborne systems eliminate the governmentregulations and associated costs of solvent based systems.

Curing Agents can be selected for increased mechanical strength, water resis-tance, chemical resistance, gloss, adhesion or low temperature cure.

To obtain the latest copy of ourEpoxy Catalog, please contact ourTechnical Service Department.USA: 1.800.992.2424Canada: 1.800.323.4621

ms


ms


ms

TECHNICALSERVICE:

U.S.A.call1.800.992.2424(8-4EasternTime)

CANADAcall1.800.323.4621(8-4EasternTime)

EPON epoxy resinsand curing agents


CONNECTICUTmiller-stephensonGeorgeWashingtonHighwayDanbury,CT06810USA203.743.4447/Fax203.791.8702

CANADAmiller-stephenson90SummerleaRoadBrampton,OntarioL6T4X3Canada416.675.3204/Fax416.674.2987

CALIFORNIAmiller-stephenson12261FoothillBoulevardSylmar,CA91342USA818.896.4714/Fax818.896.6086

ILLINOISmiller-stephenson6348OaktonStreetMortonGrove,IL60053USA847-966-2022/Fax847.966.8468

1354-12C2

over 50 years of quality and service

TM

TM

™ Trademark of Hexion Specialty Chemicals, Inc.

39

Overview of our Epoxy LineEPON™ Epoxy ResinsEPON™ Epoxy Resins were developed to provide superior overall performance ina variety of end-use applications. These products enable manufacturers toachieve practically any desired performance level, while optimizing processabilityand strength retention at elevated temperatures. EPON™ Resins are the standardof the epoxy resin market and the foundation of our resin business. The productline includes liquid resins; solid resins, solutions, blends and other multifunctionalresins based on a variety of backbones.

EPON™ Epoxy Resins are high-performance resin products/systems for use incoating, adhesive, civil engineering, structural, electronic and composite applica-tions.

EPIREZ™ Waterborne Epoxy ResinsProvide benefits such as extended pot life, high cross-link density, high tempera-ture performance, very good chemical resistance, low color and complete water-reducibility.

EPIREZ™Waterborne Resins products offer unique handling and application char-acteristics for epoxy and other thermoset resins. They are compatible with oneanother and allow the formulator to easily combine resin types and molecularweight. They can be diluted to any desired solids level simply with water. Cleanupwith water eliminates the need for solvents. Due to their high degree of compati-bility with many components, they can be formulated with wetting agents; cosol-vents and coupling agents for improved film formation or adhesion.

Applications include flooring, civil engineering and adhesives to reduce or elimi-nate VOC level and the presence of hazardous substances such as formalde-hyde, without sacrificing performance.

EPIKURE™ Curing AgentsOne of the broadest lines of resin systems for coatings is offered through theEPIKURE™ Specialty Curing Agent products. We offer amine hardeners that aredesigned for low temperature cure, blush-free film, surface-tolerant tank linings,underwater cure and MDA replacements. The numerous curing agent technolo-gies offered enable our customers to tailor the performance of their formulationsto meet the challenging demands of their coating applications while satisfying reg-ulatory requirements.

EPIKURE™ Curing Agents find areas of applications in coatings, adhesives, pot-ting, encapsulating, molding and fiber-reinforced (FRP) applications. Other popu-lar coatings end-use areas of application include marine, industrial maintenancepipe linings, automotive refinish, civil engineering and secondary containment.

Other Curing AgentsVersamid® Polyamide Curing Agents are highly resistant to chemical and watercorrosion and have strong adhesion to a variety of substrates. Their principleapplications are in coatings, castings, potting, laminating and adhesives. They areused in industrial maintenance and marine coatings, high-performance architec-tural paints, high solid and conventional coatings.

Anhydride Curing Agents have excellent electrical properties, good overall chem-ical resistance and good physical properties. They provide a very long pot life andrequire a heat cure.

EPON

™Epoxy R

esins, Modifiers &

Curing A

gents


- For Industrial Use Only - 40

41

ms


HELOXY™ ModifiersHELOXY™ Modifiers offer formulators the ability to choose between monofunc-tional and polyfunctional glycidyl ethers and flexibilizers for their formulatingneeds. They offer:- Improved cured system flexibility- Increased peel and impact strength- Increased levels of filler loading- Improved resin wetting action- Reduced viscosity and surface tension

HELOXY™ Modifiers are epoxy-functionalized alcohols, diols and polyols. Threeclasses of HELOXY™ Modifiers are offered: monofunctional glycidyl ethers, poly-functional glycidyl ethers and flexibilizers.

The polyfunctional products include an aliphatic which provides some increase inflexibility while increasing chemical resistance and mechanical performance of thesystem. The cycloaliphatic modifier offers improved UV resistance when com-pared to aromatic modifiers and the trifunctional modifier can increase thecrosslink density of a system.

There are three HELOXY™ Modifier products that are considered flexibilizers.These products can improve wetting performance; offer good color properties foroutdoor applications and can increase the impact strength and toughness of asystem.

Areas of application include coatings, structural engineering, adhesives, fiber-reinforced (FRP) applications, potting and molding.

EPONOL™ ResinsEPONOL™ Resins are high-molecular-weight epoxy resins used primarily in paintcoatings and in prepreg laminants. For paint coatings, the resins offer good flex-ibility to help reduce chipping and cracking. For prepreg laminants, EPONOL™

Resins act like a thickening agent and offer good flow control to help keep plas-tics from literally oozing and running during heating.

EPONEX™ ResinsEPONEX™ weatherable epoxy resins are a unique class of low viscosity epoxyresins, which in properly formulated solvent and waterborne coatings, exhibitimproved exterior performance over conventional bisphenol-A type epoxy resinwhile retaining epoxy-like properties. These weatherable epoxy resins have beensuccessfully applied in high solids coatings, including baking finishes, as modi-fiers for industrial acrylic finishes, clear coatings for wood, a binder for decorativeaggregate, and in certain maintenance applications.

42Component in MS-111 Stripping Agent

For other Stripping Agents,see Page 23.

Epoxy Stripping AgentStripping Agent MS-111 (Qt, Gal, 55G)

A versatile stripping agent used to penetrate and dissolve the chemically resistant formulas of today’s castings, coat-ings and encapsulants. MS-111 will readily soften and strip most organic systems including cured epoxies and ure-thanes. It is not recommended for stripping magnet wire. MS-111 will not attack any metal surfaces or valuable metalparts during the time necessary to remove polymers. Ideal for removing encapsulants for failure analysis of electroniccomponents. Nonflammable, low in viscosity and free-rinsing with water. No ODC (ozone depleting chemicals).

Epoxy Resin

To 3,000 psi

A two-part paste adhesive packaged in equal volume tubes.

Part A is blue. Part B is beige. When thoroughly mixed, theresultant color is pale gray.

Approximately 120,000 cps, thixotropic.

Equal parts by volume.

24 hours at 77°F(25°C), or 2 hours at 140°F(60°C), orone hour at 180°F(82°C).

20 minutes at 77°F(25°C).

Up to 180°F(82°C).

Good adhesion to a wide variety of surfaces which havenot been specially cleaned. Proportioning of Parts A and Bnot critical. Definite color change during mixing.

More than one year at 75°F(24°C).

BASE

BOND STRENGTH

FORM

COLOR

VISCOSITY

MIXING RATIO

CURE

POT LIFE

SERVICE TEMPERATURE

SPECIAL PROPERTIES

SHELF LIFE

Epoxy Adhesive SystemTwo-part Epoxy Adhesive SystemMS-907 (3.7 oz Kit)

For bonding metals, glass, ceramics, plastics, wood, rubber, fabrics and concrete. Miller-Stephenson's Epoxy 907 AdhesiveSystem is a two-part, equal volume, room temperature curing system particularly useful for general purpose bonding. Fast set-up time. Perfect for in-plant and field use. Develops bond strength to 3,000 psi. NSN 8040-00-144-9729

EPON ™Epoxy R

esins, Modifiers &

Curing A

gents / Epoxy A

dhesive / Stripping A

gent





NOODCNonflammable

NOODCNonflammable

ms

43

Krytox® is a Registered Trademark of DuPont.

Oils and Greases

Krytox ®

FLUORINATED LUBRICANTS

44

Advantages:

• High Temperature Stability, up to 800°F / 426°C

• Wide Operating Range, from -103°F (-75°C) to greater than 800°F (426°C), compared with hydro-carbon lubricants with an operating range of 0°F (-18°C) to 210°F (98°C).

• Oxygen Compatibility, safe for oxygen service.

• Chemical Inertness. Insoluble in hydrocarbons, petroleum distillates, water, steam, chemical solventsand acids/bases. Provides extra protection against aggressive chemicals that degrade conventionallubricants.

• Ionizing Radiation Resistance, more stable than most hydrocarbon and synthetic materials.

• Compatible with plastics, elastomers, metals and ceramics.

• Extends Service Life of critical components. Reduces down time and maintenance costs.

• Low Vapor Pressure

• Low Outgassing

• Nonflammable

• Nontoxic

• No Migration, contains no silicones.

• Food Grades (H1 & H2)

• Aerospace Grades

• Mil-spec Grades

45

ms

Krytox Fluorinated Oils & GreasesOriginally developed for the U.S. Space Program, Krytox® Performance Lubricants are a family of fluorinated syntheticoils and PTFE thickened greases that perform where conventional lubricants fail. Krytox® Lubricants exhibit superiorlubricity, high load carrying ability and extra wear protection. Excellent for high temperature applications and chemical-ly aggressive environments. Available in general purpose, mil-spec grade and food grades. Some lubricants also havea National Stock Number.

®


Nonflammable

ms

Krytox® Fluorinated

Synthetic Lubricant

MS-1106

Packaging:

This section illustrates packaging configurations which are currently in production. Custompackaging is available.

NEEDLE BOTTLESOil:

1/2 oz, 1 oz, 2 oz, 4 oz

DROPPER BOTTLESOil:

(Snap Top)1/2 oz, 1 oz, 2 oz, 4 oz, 8 oz

(Screw Top)3 - 6 grams,1/2 oz,1 oz, 2 oz

Dab-O-Matic®

Oil: 1/2 oz, 1 oz, 2 oz

CONTAINERSOil:

.5 kg (1.1 lb)1 kg (2.2 lb)2 kg (4.4 lb)

Grease:.5 kg (1.1 lb)

SYRINGEOil: 1/2 oz

Grease:1/2 oz

TUBESGrease:

1/2 oz (GPL 205, GPL 206 only)2 oz, 8 oz

CARTRIDGEGrease:

0.8g (1.76 lb)

PAILSOil:

8 kg (17.6 lb)20 kg (44 lb)

Grease:7 kg (15.4 lb)20 kg (44 lb)

Dab-O-Matic® is a Registered Trademark of Dab-O-Matic Corp.Krytox® is a Registered Trademark of DuPont.

Krytox

® Fluorinated

Lubrican

ts


46

Custom Packaging Also Available

AEROSOL

8 oz, 14 oz

PRODUCT OVERVIEW

Krytox® Oils: 100 to 107 Series, 143 Series: clear, colorless, fluorinatedsynthetic fluids, stable to 650°F.

Krytox® Oils Aerosol: MS-1100 Series: For pinpoint accuracy and thin film appli-cations.

XHT-Oils: extreme high temperature grades with low oil evap-oration, stable to 680°F.

XP1 Series: contains patented soluble additives for enhancedanticorrosion, anti-wear and extreme pressure performance.

Krytox® Greases:200 to 207 Series, 240 Series: thickened with polyte-trafluorethylene (PTFE), can be used to 600°F.

210 to 217 Series, 250 Series: extreme pressure greas-es that contain 5% molybdenum disulfide, for use on highlyloaded gears and bearings.

220 to 227 Series, 283 Series: anticorrosion, whitegreases that contain sodium nitrite. These grades provide rustprotection at ambient temperatures, corrosion protection at hightemperatures and anti-wear protection.

407: silica thickened grease, can be used at temperatures upto 800°F.

EG Series: electronic grade greases, stable to 550°F.

XHT Series: several grades that offer anticorrosion, extrabonding and non-melting properties for extra high temperatureapplications.

XP2 Series: contains patented soluble additives for enhancedanticorrosion, anti-wear and extreme pressure performance.

LVP: grease for use with equipment operating in high vacuumand/or high temperature (up to 570°F) where minimum evapora-tion losses are required.

47

ms

NOTE: Standard grease consistency is NLGI grade 2, except for 240AZ which is NLGI grade 1. Softer or harder

NLGI grades can be made by special order.


NEW!

ms

Krytox® Fluorinated

Synthetic Lubricant

MS-1106

48

Krytox

®Fluorinated

Lubrican

ts


DuPont has introduced several unique tech-nologies in their line of Krytox® FluorinatedLubricants! These include:

EG SeriesA new series of fluorinated lubricants designed for electronic man-ufacturing. It can be used in ball bearings, linear rails, ball andlead screw designs and all other places where a durable, reliablelubricant is required. This series also offers a lubricant for cleanroom operations. It has been designed to be clean room friendlyand deliver the performance of conventional lubrication.

XHT (Extra High Temperature) LubricantsA new series of fluoropolymer lubricants designed for applicationsin the 400° - 760°F temperature range with spikes to 800°F. Theselubricants were designed to meet the demands of applicationsinvolving extreme operating temperatures while maintaining theKrytox® standards of being chemically inert, thermally stable, non-flammable, and nonvolatile.

FG (Food Grade H-1) LubricantsAnother addition to the line of Krytox® products includes 16 newFG (Food Grade) fluoropolymer performance lubricants. Theseare approved as lubricants with incidental food contact (H-1) foruse in and around food processing areas. They may be used onfood processing equipment as a release agent on gaskets orseals of tank closures, or as a lubricant for machine parts andequipment where there is a potential exposure of the lubricatedpart to food.

Linear Fluids (High Viscosity Index)Also, a new line of Krytox® Linear fluids is available. These fluidshave the standard excellent chemical and thermal stability butwith improved High Viscosity Indexes. The new fluoropolymer mol-ecular structure produces an oil that maintains the desired vis-cosity over a wider temperature range.

Krytox ® XP Lubricants with Patented SolubleAdditivesKrytox® XP oils and greases with patented soluble additives areformulated for anti-rust, anti-wear, and extreme pressure applica-tions. Since there are no solid additives in these formulations,improved performance is obtained. Bearings run quieter and wearless, extending bearing and component life. The anticorrosion pro-tection reduces rusting and allows longer grease and bearing life.The extreme pressure properties of the additive protect bearingsunder high loads.

ms

49

Typical Krytox Applications

Aerospacevalves & o-rings in oxygen serviceLOX pump bearing housingsgyroscope fluidfuel pumpshydraulic fuel valvesactuation & control systems

AutomotiveCV Jointsanti-lock braking systemsfuel pumpswheel bearingsalternator bearingsspark plug boots & threadsuniversal jointsrear axle drive flangeweather stripping

Chemical Manufacturing(oxidizers, explosives, caustics, corrosives)

control valvesstopcocks, ground glass jointspressure relief valvesinduced draft fan bearingspumps in chlorine serviceseals, o-rings in storage tanksreactor agitator shaft sealsstack emission control valvesknife gate valves, sulfuric acid mfr.particle sifter gyratormetering pumpsplug valves, corrosive chemical serviceslide valves

Clean Roomsvalves & bearingsoverhead conveyor systems

Electronicsrack & pinion disk driveslaser/compact diskselectric motor bearingsplasma etch systemselectroplating equipmentwave soldering machinesclean room equipmentwafer processing equipment

Fire SafetySCBA (Self Contained Breathing Apparatus)sprinkler systems - valves, o-ringsfire detectorsdeluge valve systems

Food Processing & Packagingbearings, chains & gear boxeshigh temperature fans & ovensvacuum pumps & valves

Foundries / Metal Manufacturing pump shaft bearingshot roll bearingsplug valvesstack emission control valveselectric arc furnaces

Marine

Oil / Petrochemicalsdown-hole drilling equipmentemission control valvespipeline inspection equipmentcamshaft bearings - inlet control valvesline system valves

Opticslaser opticsvacuum chamber thrust bearingsoptical stage equipmentlaser positioning gearssputtered coatings

Oven Conveyor Systemskiln car bearings, trolley bearing assemblies

Oxygen Service

Paper & Pulp Manufacturingsingle facer corrugating machinessodium hypochlorite bleach-valve stemthrough-air drying equipmenthot oil unions

Pharmaceutical Manufacturing

Plastics Manufacturingblow & fill rotator bearingsgear pumps, extrusion linesheated roll bearingsinjection molding equipment

Power Generationhigh temperature bearings & valveselectric submersible equipmentpillow block bearings on fan coil unitscontrol rod drive mechanismsinlet control valvesturbine cam follower roller bearings sump pump bearingssteam turbine governorsootblower carriage bearings and gearshydro grate stokerdamper bearingssteam and other high temperature valves knife gate valvesfan bearingsgas turbine trunnion bearingsteam turbine governorradiation resistant lubricantswitchgear electrical contacts

Textile Manufacturingextruding linesdye machinesneedle loomsseparator roll & pillow block bearings

Vacuum Systemslight bulb manufacturingelectrostatic ion beam systemsmetal deposition

Water Treatmentco-deck rotary unionchlorine whipsozone cells, diaphragm housing sealantwater immersed valves & bearings

®


Krytox® GPL 206 and GPL 226 are designed to meet the requirementsof most applications. Other grades are designed for specific industryapplications.

TYPICAL APPLICATIONS & RECOMMENDED PRODUCTS:

Applications Krytox® ProductValves: plug, ball, and release GPL 206 or 226Oxygen equipment valves GPL 206 or 240AC (Mil-Spec)LOX pump bearing housings GPL 103Cars: CV joints & wheel bearings GPL 215Axle & drive plates GPL 217Seals and Gaskets GPL 205 or 206Weather stripping GPL 105Alternator needle bearings GPL 226 or 283ACAnti-lock braking systems GPL 223Single facer corrugating machines GPL 226 or 227Slide valves - resin manufacturing GPL 407High temperature bearings XHT-BDXClean Room EG 2500

50

MILITARY SPECIFICATIONS: Krytox® 240 AZ meets MIL-PRF-27617 Type I

Krytox® 240 AB meets MIL-PRF-27617 Type II

Krytox® 240 AC meets MIL-PRF-27617 Type III

Krytox® 240 AD meets SM-C-806563

NATIONAL STOCK NUMBERS (NSN): Krytox® 143 AZ 9150-01-106-1008

Krytox® 240 AB 9150-01-088-0498

Krytox® 240 AC 9150-00-422-8066

Krytox® 240 AC 8 oz tube 9150-00-961-8995

Krytox® 240 AZ 8 oz tube 9150-01-007-4384

FOOD GRADE: Krytox® FG Lubricants H-1 rating.

Standard Krytox® grades have an H-2 rating.

Krytox

®Fluorinated

Lubrican

ts


To obtain the latest copy of ourKrytox® Catalog, please contact ourTechnical Service Department.USA: 1.800.992.2424Canada: 1.800.323.4621

TECHNICALSERVICE:

U.S.A.call1-800-992-2424(8-4EasternTime)

CANADAcall1-800-323-4621(8-4EasternTime)

Krytoxp e r f o r m a n c e l u b r i c a n t s


CONNECTICUTmiller-stephensonGeorgeWashingtonHighwayDanbury,CT06810USA203-743-4447/Fax203-791-8702

CANADAmiller-stephenson90SummerleaRoadBrampton,OntarioL6T4X3Canada416-675-3204/Fax416-674-2987

CALIFORNIAmiller-stephenson12261FoothillBoulevardSylmar,CA91342USA818-896-4714/Fax818-896-6086

ILLINOISmiller-stephenson6348OaktonStreetMortonGrove,IL60053USA847-966-2022/Fax847-966-8468

1337-10D5

Krytox® is a Registered Trademark of DuPont

ms

over 50 years of quality and service

®



U.S. Government & Other Specifications

Solvent CleanersMS-176/CO2 FREON® TES Solvent, Cleaning compound, 16 oz Aerosol MIL-C-85447A(AS) Type I

electrical and electrical components.

MS-720 Precision Cleaning Agent 16 oz Aerosol 6850-01-519-1819

MS-755 Vertrel® SMT Heavy Duty Solvent & Flux Remover 16 oz Aerosol 6850-01-521-5719

MS-775 Vertrel® XE Cleaning Agent 16 oz Aerosol 6850-01-519-1809

MS-780 Vertrel® XF Cleaning Agent 16 oz Aerosol 6850-01-460-4914

Vertrel® MCA Cleaning Agent 5 Gal 6850-01-435-565855 Gal 6850-01-435-5661

Vertrel® SMT Cleaning Agent 5 Gal 6850-01-435-566255 Gal 6850-01-435-5664

Vertrel® XF Cleaning Agent 5 Gal 6850-01-435-565955 Gal 6850-01-435-5660

Solvent Flux RemoversMS-190/CO2 FREON® TMC Solvent Flux Remover 16 oz Aerosol 6850-00-419-5004

MS-190HD/CO2 FREON® TMC Heavy Duty Solvent 16 oz Aerosol 6850-00-602-2347Flux Remover


Contact CleanerMS-730 Safezone Contact Re-Nu® 16 oz Aerosol 6850-01-519-1815

Conformal CoatingsMS-460C Silicone Conformal Coating, moisture and 14 oz Aerosol UL # E81611 MIL-I-46058C TYPE SR *

fungal resistance, for communications,electronic and associated electrical equipment.

MS-462C Silicone Conformal Coating, moisture and Qt, Gal, 5 Gal UL # E81611 MIL-I-46058C TYPE SR *fungal resistance, for communications, electronicand associated electrical equipment.

MS-470C Urethane Conformal Coating, moisture and 14 oz Aerosol MIL-I-46058C TYPE UR *fungal resistance, for communications, electronic MIL-C-47175A *and associated electrical equipment.

National Stock(NSN)/ Other Numbers

ContainerDescriptionProduct MilitarySpecifications

51

ms


U.S. Government & Other Specifications

Solvent CleanersMS-176/CO2 FREON® TES Solvent, Cleaning compound, 16 oz Aerosol MIL-C-85447A(AS) Type I

electrical and electrical components.

MS-720 Precision Cleaning Agent 16 oz Aerosol 6850-01-519-1819


MS-775 Vertrel® XE Cleaning Agent 16 oz Aerosol 6850-01-519-1809

MS-780 Vertrel® XF Cleaning Agent 16 oz Aerosol 6850-01-460-4914

Vertrel® MCA Cleaning Agent 5 Gal 6850-01-435-565855 Gal 6850-01-435-5661

Vertrel® SMT Cleaning Agent 5 Gal 6850-01-435-566255 Gal 6850-01-435-5664

Vertrel® XF Cleaning Agent 5 Gal 6850-01-435-565955 Gal 6850-01-435-5660

Solvent Flux RemoversMS-190/CO2 FREON® TMC Solvent Flux Remover 16 oz Aerosol 6850-00-419-5004

MS-190HD/CO2 FREON® TMC Heavy Duty Solvent 16 oz Aerosol 6850-00-602-2347Flux Remover


Contact CleanerMS-730 Safezone Contact Re-Nu® 16 oz Aerosol 6850-01-519-1815

Conformal CoatingsMS-460C Silicone Conformal Coating, moisture and 14 oz Aerosol UL # E81611 MIL-I-46058C TYPE SR *

fungal resistance, for communications,electronic and associated electrical equipment.

MS-462C Silicone Conformal Coating, moisture and Qt, Gal, 5 Gal UL # E81611 MIL-I-46058C TYPE SR *fungal resistance, for communications, electronicand associated electrical equipment.

MS-470C Urethane Conformal Coating, moisture and 14 oz Aerosol MIL-I-46058C TYPE UR *fungal resistance, for communications, electronic MIL-C-47175A *and associated electrical equipment.

NOTE:These Military Specifications and National Stock Numbers are accurate to the best of our knowl-edge. However, because they change so rapidly without notice, it is recommended that they beverified before using. The Epoxy and Resin Systems which meet Mil Specs are certified only tothe uncured systems.

* Base Resin Conforms to Mil Spec.

National Stock(NSN)/ Other Numbers

ContainerDescriptionProduct MilitarySpecifications

52

MS-472C Urethane Conformal Coating, moisture and Qt, Gal, 5 Gal MIL-I-46058C TYPE UR *fungus resistant, for communications, electronic MIL-C-47175A *and associated electrical equipment.

MS-475C Acrylic Conformal Coating, moisture and fungus 14 oz Aerosol MIL-I-46058C TYPE AR *resistant, for communications, electronic and associated electrical equipment.

MS-477C Acrylic Conformal Coating, moisture and fungus Qt, Gal, 5 Gal MIL-I-46058C TYPE AR *resistant, for communications, electronic and associated electrical equipment.

Specialty Products MS-222N Aero-Duster® 14 oz Aerosol 6850-01-346-9144

MS-226 COBRA® BRUSH, Attachment to aerosol Kit 7920-00-134-1998solvents.

MS-242N Quik-Freeze® 14 oz Aerosol 6850-01-333-1841

MS-260 Cleaner - Plastic/Glass/Metal, non-streaking. 16 oz Aerosol 7930-01-064-5179

MS-381H Connector Lubricant 16 oz Aerosol 6850-01-519-8521

MS-383H Connector Lubricant Quart 6850-01-538-3496

MS-907 Epoxy Adhesive Kit (two part) 2-2 oz Tubes 8040-00-144-9729

Epoxy Resins / Curing AgentsEPIKURE™ 3140 Curing Agent Polyamide Quart 8040-01-498-4975

Versamid® 115 Curing Agent Polyamide Quart 8030-00-796-3338

Versamid® 125 Curing Agent Polyamide Pint 8040-00-712-1419Gallon 8030-00-893-4224

Versamid® 140 Curing Agent Polyamide Qt, Gal, 5 Gal, 55 Gal 8040-00-10-50826

EPON™ Resin 828 Epoxy Resin Pint 8030-00-086-1506Quart 8040-00-822-6430Gallon 8030-01-312-121155 Gallon 8040-00-040-5986

EPON™ Resin 815CEpoxy Resin Gallon 8040-00-843-7873

Release Agents / Dry LubricantsMS-122AD Release Agent / Dry Lubricant 14 oz Aerosol 9150-01-528-5624MS-122B Release Agent / Dry Lubricant 14 oz Aerosol 9150-01-492-4474MS-122XD Release Agent / Dry Lubricant 14 oz Aerosol 9150-01-443-9003MS-143H Release Agent / Dry Lubricant Quart 9150-01-571-1708

Performance LubricantsMS-143AZ Fluorinated Oil Any Size Container 9150-01-106-1008Krytox® 240AB Fluorinated Grease Any Size Container MIL-PRF-27617 TYPE II

QPL ID # MLS 94-902 oz Tube 9150-01-088-0498 ---

Krytox® 240AC Fluorinated Grease Any Size Container 9150-00-422-8066 MIL-PRF-27617 TYPE IIIQPL ID # MLS 94-91

8 oz Tube 9150-00-961-8995 ---

Krytox® 240AD Fluorinated Grease Any Size Container --- SM-C-806563Krytox® 240AZ Fluorinated Grease Any Size Container --- MIL-PRF-27617 TYPE I

QPL ID # MLS 94-89 8 oz Tube 9150-01-007-4384

Military / O

ther S

pecificatio

ns



Bulk LiquidProducts

PageNumber

ms

Solvent CleanersHFC Solvents

4 Precision Cleaning Solvent • 14 MS-580 MS-5824 Cleaning Solvent & Flux Remover • 14 MS-550 MS-552 5 Vertrel® MCA Cleaning Agent • 16 MS-750 MS-7525 Vertrel® MCA Cleaning Agent • 8 MS-750M MS-7525,7 Heavy Duty Solvent & Flux Remover • 14 MS-555 MS-5575,7 Vertrel® SMT Heavy Duty Solvent & Flux Remover • 16 MS-755 MS-7575,7 Vertrel® SMT Heavy Duty Solvent & Flux Remover • 8 MS-755M MS-7576 Vertrel® XM Cleaning Agent • 16 MS-765 MS-7676 Vertrel® XM Cleaning Agent • 8 MS-765M MS-7676 Vertrel® SDG Specialty Fluids • Vertrel® SDG7 Vertrel® MCA Plus - Heavy Duty Solvent & Flux Remover • 16 MS-770 MS-7727 Vertrel® MCA Plus - Heavy Duty Solvent & Flux Remover • 8 MS-770M MS-772 4 Vertrel® XF Cleaning Agent • 16 MS-780 MS-7824 Vertrel® XF Cleaning Agent • 8 MS-780M MS-782 8 Vertrel® XMS Plus - Heavy Duty Solvent & Flux Remover • 16 MS-795 MS-7978 Vertrel® XMS Plus - Heavy Duty Solvent & Flux Remover • 8 MS-795M MS-7976 Vertrel® XSi Silicone Solvent • 16 MS-745 MS-7476 Vertrel® XSi Silicone Solvent • 8 MS-745M MS-747

HFE Solvents4 Precision Cleaning Agent • 16 MS-720 MS-7224 Precision Cleaning Agent • 8 MS-720M MS-7228 Heavy Duty Solvent & Flux Remover • 16 MS-725 MS-7278 Heavy Duty Solvent & Flux Remover • 8 MS-725M MS-727

Solvent Flux RemoversHFC Solvents

5,7 Heavy Duty Solvent & Flux Remover • 14 MS-555 MS-5575,7 Vertrel® SMT Heavy Duty Solvent & Flux Remover • 16 MS-755 MS-7575,7 Vertrel® SMT Heavy Duty Solvent & Flux Remover • 8 MS-755M MS-757 7 Vertrel® MCA Plus - Heavy Duty Solvent & Flux Remover • 16 MS-770 MS-7727 Vertrel® MCA Plus - Heavy Duty Solvent & Flux Remover • 8 MS-770M MS-772 8 Vertrel® XMS Plus - Heavy Duty Solvent & Flux Remover • 16 MS-795 MS-7978 Vertrel® XMS Plus - Heavy Duty Solvent & Flux Remover • 8 MS-795M MS-7978 Vertrel® SFR Specialty Fluids • Vertrel® SFR

HFE Solvents8 Heavy Duty Solvent & Flux Remover • 16 MS-725 MS-7278 Heavy Duty Solvent & Flux Remover • 8 MS-725M MS-727

Contact Cleaners HFE Solvents

9 Contact Re-Nu® • 14 MS-530 MS-5329 Contact Re-Nu® • 16 MS-730 MS-732

Contact Lubricants 9 Contact Re-Nu® & Lube • 16 MS-738 MS-7399 Contact Re-Nu® & Lube • 8 MS-738M MS-7399 Contact Re-Nu® & Lube • 14 MS-538 MS-539

Media Head Cleaners10 Media Head Cleaner • 16 MS-700 MS-70210 Media Head Cleaner • 8 MS-700M MS-702

Aerosol Products

Net Weight(ounces)

Quart, Gallon, 5 Gallon, and 55 Gallon Containers

Product Index


• = ODC Free• = Class II ODC

ODC = Ozone Depleting Chemicals54

Bulk LiquidProducts

PageNumber

Aerosol Products

Custom Packaging Available Upon Request.

Net Weight(ounces)

Quart, Gallon, 5 Gallon, and 55 Gallon Containers


Product In

dex


Specialty Cleaner10 Safezone Cleaner (Plastic-Glass-Metal) • 16 MS-260 MS-26210 Safezone Cleaner (Plastic-Glass-Metal) • 8 MS-260M (Pump) MS-262

Aero-Duster®14 Aero-Duster® • 14 MS-222N14 Aero-Duster® • 10 MS-222T14 Aero-Duster® • 6 MS-222F

Freeze Agents / Coolants14 Quik-Freeze® • 14 MS-242N14 Quik-Freeze® Anti-Static • 14 MS-242N-AS

Connector Lubricants13 Connector Lubricant • 14 MS-124H MS-126H13 Connector Lubricant • 16 MS-381HC MS-383H13 Connector Lubricant • 8 MS-381HCM MS-383H13 Connector Lubricant • 16 MS-381H MS-383H13 Connector Lubricant • 8 MS-381HM MS-383H

Conformal / Protective Coatings18-22 Silicone Conformal Coating - Mil. Spec. • 14 MS-460C MS-462C18-22 Acrylic Conformal Coating • 14 MS-465C MS-467C18-22 Urethane Conformal Coating - Mil. Spec. • 14 MS-470C MS-472C18-22 Acrylic Conformal Coating - Mil. Spec. • 14 MS-475C MS-477C18-22 Protective Varnish • MS-452N23 Conformal Coating Stripper • MS-114C23 Conformal Coating Stripper • MS-11523 Conductive Coating • MS-487C

Cutting & Drilling Fluid15 Vertrel® X-B3 Cutting & Drilling Fluid • 16 T0701A T0701B15 Vertrel® X-B3 Cutting & Drilling Fluid • 8 T0701A(M) T0701B

Release Agents26-33 PTFE Release Agent - Dry Lubricant • 14 MS-122AD26-33 PTFE Release Agent - Dry Lubricant • 14 MS-122AX MS-143AX26-33 PTFE Release Agent - Dry Lubricant • 16 MS-122RB26-33 PTFE Release Agent - Dry Lubricant • 14 MS-122XD MS-143XD26-33 PTFE Release Agent - Dry Lubricant • MS-143E26-33 PTFE Release Agent - Dry Lubricant • MS-143H26-34 PTFE Release Agent for Hot Molds • 12 MS-136W MS-145W34 Boron Nitride Release Agent • 14 E0201A34 Boron Nitride Release Agent • 14 E1121B

36-41 EPON™ Epoxy Resins and Curing Agents42 Epoxy Adhesive System • MS-90742 Epoxy Stripping Agent • MS-111

44-50 Krytox® Fluorinated Oils and GreasesAerosol Accessories

15 Cobra® Brush (Use with MS Solvents) MS-22616 Cobra® Duster (Use with Aero-Duster ®) MS-228

55

You are invited!

ms

iller-Stephenson#Chemical#Company#is#sit-uated# in# the# midst# of# a#wooded# private#wildlifepreserve#in#Fairfield#County,#Connecticut.##Downa#short#path#from#the#building#entrance,#a#spring-fed# lake# is# stocked#with# rainbow# trout#and#busywith#the#activities#of#the#mallard#ducks#who#havetheir#home#here.##Canadian#geese#and#the#woodduck#visit# the# lake#and#the#well-stocked#feedingstations#during#their#annual#migrations.##Pheasantwander# freely# across# the# lawns# and# among# theshrubbery.

But#the#pride#of#the#preserve#is#a#herd#of#gen-tle#English#Fallow#deer#who#roam#the#woods,#yetare#tame#enough#to#nibble#apple#slices#from#chil-dren#visitors.

Miller-Stephenson# invites# our# customers# andfriends# to#visit# this#preserve,#a#harmonious#blend#ofnature#and#industry.##The#preserve#is#open#to#visitorsduring#weekdays.

M

© 2010 Miller-Stephenson Chemical Company, Inc.

T O P L ACE A N ORDER

CALIFORNIAMiller-Stephenson Chemical Co., Inc.12261 Foothill BoulevardSylmar, California 91342 USA818-896-4714 / Fax 818-896-6086e-mail: [email protected]

ILLINOISMiller-Stephenson Chemical Co., Inc.6348 Oakton StreetMorton Grove, Illinois 60053 USA847-966-2022 / Fax 847-966-8468e-mail: [email protected]

CONNECTICUTMiller-Stephenson Chemical Co., Inc.George Washington HighwayDanbury, Connecticut 06810 USA203-743-4447 / Fax 203-791-8702e-mail: [email protected]

CANADAMiller-Stephenson Chemical Co., Inc.280 Belfield RoadToronto, Ontario M9W 1H6 Canada416-675-3204 / Fax 416-674-2987e-mail: [email protected]


I N T E R N AT I O N A LD I S T R I B U T I O N I N

NORTH AMERICA

SOUTH AMERICA

EUROPE

AFRICA

ASIA

AUSTRALIA

The information set forth herein is furnished free of charge and is based on technical data that Miller-StephensonChemical Co. Inc. believes to be reliable. It is intended for use by persons having technical skill and at their owndiscretion and risk. Because conditions of use are outside our control, we make no warranties, expressed orimplied, and assume no liability in connection with and use of this information. The products discussed are sold orsampled without warranty as to fitness or performance and upon condition that purchaser or user shall make theirown test to determine the suitability of such product for their particular purposes. Nothing herein is to be taken asa license to operate under or a recommendation to infringe any patents. 10/97

Contact Us...

F OR T ECHN I C A L S UPPORT

1-800-992-2424 (8-4 Eastern Time) in the U.S.

1-800-323-4621 (8-4 Eastern Time) in Canada.

e-mail: [email protected]

Our experienced team of chemists will be able to answer

your technical questions and help you in selecting the

most suitable product for your application.

Please visit our website at www.miller-stephenson.com

for an up-to-date listing of our products.

56

iller-stephensonchemicalcompany,foundedin1955,provides ... · 2019. 8. 9. · krytox ® oils and...

Documents