implantology - sweden & martina...implantology contents and index sweden & martina develops and...

I M P L A N T O L O G Y

I M P L A N T O L O G Y C O N T E N T S A N D I N D E X

Sweden & Martina develops and manufactures implant systems that offer both excellent clinical functionality and perfect aesthetic results. The surfaces have been designed to obtain the best relationships between the surface roughness of the titanium and speed of bone healing.The surgical instruments are functional, easy to use and ergonomic. Training courses, continuous refresher courses and extensive assistance distinguish the service and reliability that have made Sweden & Martina a leader in the Italian implant market.

Complete range of Premium and Kohno Straight, Switching Platform

and Transgingival implants

Common surgical instruments

Premium and Kohno Straight and Switching Platform prosthetic

components

Overdentures for Premium and Kohno Straight and Switching Platform

implants

Premium TG and Kohno TG (Transgingival) prosthetic components

with passing screw

03

30

62

Premium TG and Kohno TG (Transgingival) prosthetic components,

direct screw-retained

Premium TG and Kohno TG (Transgingival) Overdentures

Common prosthetic components

General

138

146

152

158

103

112

Complete range of Premium and Kohno Straight,Switching Platform and Transgingival implants


Premium and Kohno Straightand Switching Platformprosthetic components

Overdentures for Premiumand Kohno Straight and

Switching Platform implants

Premium TG and Kohno TG (Transgingival)prosthetic components

with passing screw

Premium TG and Kohno TG (Transgingival)prosthetic components,


Premium TG andKohno TG (Transgingival)

Overdentures


General

PREMIUM Ø 3.30 MMDedicated to intraforaminal sectors and useful with thin bone crests, or to replace upper lateral incisors.

PREMIUM TRANSGINGIVALThe solution that stabilises the attachment of soft tissues, reducing handling.

IMPIANTI SHORTYIntended for bone crests with reduced vertical development.

4

THE PREMIUM KOHNO SYSTEM

PREMIUM STRAIGHTThe implant with 15 yearsof clinical history.

PREMIUM SWITCHING PLATFORM The morphology is the resultof clinical findings.

KOHNO STRAIGHTThe same connection combined with a

conical morphology extends the range of use of the family.

KOHNO SWITCHING PLATFORMCharacterised by tapering

accentuated by the bevel for the Switching Platform.

KOHNO TRANSGINGIVAL To complete the range, this is the

ideal conical implant for distal sectors in the jaw.

5

666666

THE RANGE

Morphology of Premium Straight,Premium SP and Premium TG implants The different morphologies that characterise the entire family of Premium implants (Straight, Switching Platform “SP” and Transgingival “TG”) and Kohno implants (see following page) mean that the correct implant design can always be selected to suit the site in which they are to be fitted.

Only the thread of the implants with diameter 3.30 mm has a pitch of 0.60 mm and a triangular profile characterised by a 50° angle and a depth of 0.30 mm.

Implants with diameter 3.30 mm are available only with a cylindrical-shaped coronal emergence with a smooth collar 0.80 mm high.

All Premium Straight implants with a cylindrical-shaped coronal emergence have a smooth collar 0.80 mm high.

The standard thread of Premium implants has a pitch of 1 mm and a depth of 0.40 mm.

Ø 3.30

Straight

ShortyShorty implants are available in heights 7.00 and 8.50 mm, while the TG version also comes in height 6.00 mm.

777777

The neck of Premium SP implants widens gradually in the cornal direction, then returns to the implant diameter at connection level. The maximum widening is 0.60 mm on the diameter.

The height of the transgingival part of Premium TG implants is 2.2 mm irrespective of the endosseous length of the implant. Switching

Platform

Transgingival

Premium TG implants have a rounded apical profile.

All Premium implants (in all the different morphologies) have three apical cutting notches that increase the penetrating capacity, ensure a good self-threading capability, improve primary stability, ensure the non-rotational aspect and, at the same time, offer three decompression and release areas for coagulation.

88888

THE RANGE

Morphology of Kohno Straight,Kohno SP and Kohno TG implants

The bevel offers a spacer plane between the crest bone and the post closure and allows the Switching Platform technique to be performed.

The different morphologies that characterise the entire family of Kohno implants (Straight, Switching Platform “SP” and Transgingival “TG”) present the same length of the endosseous portion and differ only in the coronal portion (connection and transgingival).

Straight

Switching Platform

The Straight coronal emergence is characterised by a smooth neck 0.80 mm high.

The thread geometry is the same for all the specifications of the Kohno implant family (Straight, SP and TG).

Kohno implants (in all the different morphologies) have a rounded apical profile.

9

The 2.2 mm height of the transgingival neck is ideal for ensuring compatibility with the biological width and at the same time allows excellent management of the soft tissues.

The rounded apex of Kohno implants (Straight, SP and TG) is optimum in maxillary sinus lift procedures.

The asymmetrical profile is convex and has a flat lower surface that is ideal for supporting compression during chewing.

Transgingival

10

IMPLANT SYSTEM

Surfaces It has been widely demonstrated that the closer the roughness is to the size of the fibroblasts, the more influence it has on cell behaviour, causing the platelet activity to increase compared to a smooth surface, thus accelerating the repair and osseointegration processes: the roughness can guide the layout of the cells, alter their metabolism and proliferation, differentiate osteoblasts and modulate production of extra-cellular matrix. For clinical findings concerning Sweden & Martina surfaces refer to the paragraph in the bibliography (see page 164) with the list of numerous in-vitro and in-vivo studies.

ZirTi surfaceAll three versions of Premium implants (Straight, SP, TG) are available with the ZirTi surface, characterised by a smooth neck and a body with ZirTi treatment.

The implant body is treated with appropriate subtraction techniques that give the surface the characteristic ZirTi morphology, able to significantly increase the bone-implant contact surface and ensure excellent primary stability. The ZirTi surface has shown to have a sub-layer that promotes cell regrowth, such as to adequately boost its differentiation and proliferation.

The smooth collar allows the perfect control of the connection diameter and prevents the accumulation of plaque in the area where it joins the post.

(Zirconium Sand-Blasted Acid etched Titanium)

ZirTi surface

Smooth surface

Image from the Sweden & Martina archives

11

All Premium and Kohno implants (Straight, SP and TG) are available in the DES version characterised by surfaces with progressive increase of roughness and with a smooth neck that passes through a ZirTi treated zone to an apex coated in HRPS.

The apical portion is coated with HRPS (High Roughness Plasma Spray) and has the maximum level of roughness that can be obtained, thus guaranteeing excellent primary stability even in the presence of slightly mineralised bone and significantly increasing the bone-implant contact surface.

Smooth neck

ZirTi portion

HRPS surfaceHigh roughness Plasma Spray

Image from the Sweden & Martina archives

DES surface

The average values of roughness of Sweden & Martina surfaces reflect and fall within the parameters considered ideal by the 2nd Consensus Conference of the EAO (european Association for Osteointegration).

Dual Engineered Surface

12

IMPLANT SYSTEM

Treatments and availability

PREMIUM PREMIUM SP

diameter length

H ZirTi DES ZirTi DES

3.30

1011.51315

A-ZT-330-100

A-ZT-330-115

A-ZT-330-130

A-ZT-330-150

A-DS-330-100

A-DS-330-115

A-DS-330-130

A-DS-330-150

-

-

-

-

-

-

-

-

3.80

67

8.510

11.5131518

-

-

A-ZT-380-085

A-ZT-380-100

A-ZT-380-115

A-ZT-380-130

A-ZT-380-150

A-ZT-380-180

-

-

A-DS-380-085

A-DS-380-100

A-DS-380-115

A-DS-380-130

A-DS-380-150

-

-

-

A-ZT-380SP-085

A-ZT-380SP-100

A-ZT-380SP-115

A-ZT-380SP-130

A-ZT-380SP-150

-

-

-

A-DS-380SP-085

A-DS-380SP-100

A-DS-380SP-115

A-DS-380SP-130

A-DS-380SP-150

-

4.25

67

8.510

11.5131518

-

A-ZT-425-070

A-ZT-425-085

A-ZT-425-100

A-ZT-425-115

A-ZT-425-130

A-ZT-425-150

A-ZT-425-180

-

A-DS-425-070

A-DS-425-085

A-DS-425-100

A-DS-425-115

A-DS-425-130

A-DS-425-150

-

-

A-ZT-425SP-070

A-ZT-425SP-085

A-ZT-425SP-100

A-ZT-425SP-115

A-ZT-425SP-130

A-ZT-425SP-150

-

-

A-DS-425SP-070

A-DS-425SP-085

A-DS-425SP-100

A-DS-425SP-115

A-DS-425SP-130

A-DS-425SP-150

-

5.00

67

8.510

11.51315

-

A-ZT-500-070

A-ZT-500-085

A-ZT-500-100

A-ZT-500-115

A-ZT-500-130

A-ZT-500-150

-

A-DS-500-070

A-DS-500-085

A-DS-500-100

A-DS-500-115

A-DS-500-130

A-DS-500-150

-

A-ZT-500SP-070

A-ZT-500SP -085

A-ZT-500SP -100

A-ZT-500SP -115

A-ZT-500SP -130

A-ZT-500SP -150

-

A-DS-500SP-070

A-DS-500SP-085

A-DS-500SP-100

A-DS-500SP-115

A-DS-500SP-130

A-DS-500SP-150

6.00

8.510

11.5

-

-

-

-

-

-

-

-

-

-

-

-

PREMIUM PREMIUM SP

H H H H

13

PREMIUM TG KOHNO KOHNO SP KOHNO TG

ZirTi DES DES DES DES lengthH diameter

A-ZT-330TG-100

A-ZT-330TG-115

A-ZT-330TG-130

A-ZT-330TG-150

A-DS-330TG-100

A-DS-330TG-115

A-DS-330TG-130

A-DS-330TG-150

-

-

-

-

-

-

-

-

-

-

-

-

1011.51315

3.30

A-ZT-380TG-060

A-ZT-380TG-070

A-ZT-380TG-085

A-ZT-380TG-100

A-ZT-380TG-115

A-ZT-380TG-130

A-ZT-380TG-150

-

A-DS-380TG-060

A-DS-380TG-070

A-DS-380TG-085

A-DS-380TG-100

A-DS-380TG-115

A-DS-380TG-130

A-DS-380TG-150

-

-

-

-

K-DS-380-100

K-DS-380-115

K-DS-380-130

K-DS-380-150

K-DS-380-180

-

-

-

K-DS-380SP-100

K-DS-380SP-115

K-DS-380SP-130

K-DS-380SP-150

-

-

-

-

K-DS-380TG-100

K-DS-380TG-115

K-DS-380TG-130

K-DS-380TG-150

-

67

8.510

11.5131518

3.80

A-ZT-425TG-060

A-ZT-425TG-070

A-ZT-425TG-085

A-ZT-425TG-100

A-ZT-425TG-115

A-ZT-425TG-130

A-ZT-425TG-150

-

A-DS-425TG-060

A-DS-425TG-070

A-DS-425TG-085

A-DS-425TG-100

A-DS-425TG-115

A-DS-425TG-130

A-DS-425TG-150

-

-

-

-

K-DS-425-100

K-DS-425-115

K-DS-425-130

K-DS-425-150

K-DS-425-180

-

-

-

K-DS-425SP-100

K-DS-425SP-115

K-DS-425SP-130

K-DS-425SP-150

-

-

-

-

K-DS-425TG-100

K-DS-425TG-115

K-DS-425TG-130

K-DS-425TG-150

-

67

8.510

11.5131518

4.25

A-ZT-500TG-060

A-ZT-500TG-070

A-ZT-425TG-085

A-ZT-500TG-100

A-ZT-500TG-115

A-ZT-500TG-130

A-ZT-500TG-150

A-DS-500TG-060

A-DS-500TG-070

A-DS-500TG-085

A-DS-500TG-100

A-DS-500TG-115

A-DS-500TG-130

A-DS-500TG-150

-

-

-

K-DS-500-100

K-DS-500-115

K-DS-500-130

-

-

-

-

K-DS-500SP-100

K-DS-500SP-115

K-DS-500SP-130

-

-

-

-

K-DS-500TG-100

K-DS-500TG-115

K-DS-500TG-130

-

67

8.510

11.51315

5.00

-

-

-

-

-

-

K-DS-600-085

K-DS-600-100

K-DS-600-115

-

-

-

-

-

-

8.510

11.56.00

PREMIUM TG KOHNO KOHNO SP KOHNO TG

All measurements are given in mm, unless indicated otherwise

H H H H H

14

THE PREMIUM STRAIGHT, PREMIUM SP, PREMIUM TG RANGE

L. mm Ø 3.30 mm Ø 3.80 mm

Straight SP TG Straight SP TG

6

ZirTiDES

- - - - -

A-ZT-380TG-060A-DS-380TG-060

7

ZirTiDES

- - - - -

A-ZT-380TG-070A-DS-380TG-070

8.5

ZirTiDES

- - -

A-ZT-380-085A-DS-380-085

A-ZT-380SP-085A-DS-380SP-085

A-ZT-380TG-085A-DS-380TG-085

10

ZirTiDES

A-ZT-330-100A-DS-330-100

-

A-ZT-330TG-100A-DS-330TG-100

A-ZT-380-100A-DS-380-100

A-ZT-380SP-100A-DS-380SP-100

A-ZT-380TG-100A-DS-380TG-100

11.5

ZirTiDES

A-ZT-330-115A-DS-330-115

-

A-ZT-330TG-115A-DS-330TG-115

A-ZT-380-115A-DS-380-115

A-ZT-380SP-115A-DS-380SP-115

A-ZT-380TG-115A-DS-380TG-115

13

ZirTiDES

A-ZT-330-130A-DS-330-130

-

A-ZT-330TG-130A-DS-330TG-130

A-ZT-380-130A-DS-380-130

A-ZT-380SP-130A-DS-380SP-130

A-ZT-380TG-130A-DS-380TG-130

15

ZirTiDES

A-ZT-330-150A-DS-330-150

-

A-ZT-330TG-150A-DS-330TG-150

A-ZT-380-150A-DS-380-150

A-ZT-380SP-150A-DS-380SP-150

A-ZT-380TG-150A-DS-380TG-150

18

ZirTiDES

- - -

A-ZT-380-180-

- -

Surgical cover screws

A-VT-330 A-TG-VT-M A-VT-380 A-TG-VT-M

- Ø 3.30 mm implants: The use of the Premium ø 3.30 mm implants is only for replacing the central and lateral incisors and upper and lower canine teeth. They can also be used in the pre-molar and molar zone, but only to support the prosthetic structures which are also supported by implants with a bigger diameter.

- Shorty implants are characterised by a reduced vertical dimension, it is recommended to use them with implants with traditional dimensions with joined prostheses.

15.0015.00

13.0013.00

11.5011.50

10.0010.00

8.50

7.00

6.00

15.00

13.00

11.50

10.00

8.50

15.0015.00

18.00

13.0013.00

11.5011.50

10.0010.00

8.50

ø 4.80ø 4.80

ø 4.80ø 4.80

ø 4.80ø 4.80

ø 4.80ø 4.80

ø 4.80

ø 4.80

ø 4.80

ø 4.45

ø 4.45

ø 4.45

ø 4.45

ø 4.45

ø 2.97

ø 2.97

ø 2.97

ø 2.97

ø 2.97

ø 2.97ø 2.52

ø 2.97ø 2.52

ø 2.97ø 2.52

ø 2.97ø 2.52

ø 2.97

ø 2.97

ø 2.97

ø 2.97ø 2.52

ø 2.97

ø 2.97ø 2.52

ø 2.97ø 2.52

ø 2.97ø 2.52

ø 2.97

ø 3.80ø 3.30

ø 3.80ø 3.30

ø 3.80ø 3.30

ø 3.80ø 3.30

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80ø 3.30

ø 3.80

ø 3.80ø 3.30

ø 3.80ø 3.30

ø 3.80ø 3.30

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

2.202.20

2.202.20

2.202.20

2.202.20

2.20

2.20

2.20

A ZT 380TG 130

13.00

4.80

2.97

3.80

2.20

15

Ø 4.25 mm Ø 5.00 mm L. mm


- -

A-ZT-425TG-060A-DS-425TG-060

- -

A-ZT-500TG-060A-DS-500TG-060

6

ZirTiDES

A-ZT-425-070A-DS-425-070

A-ZT-425SP-070A-DS-425SP-070

A-ZT-425TG-070A-DS-425TG-070

A-ZT-500-070A-DS-500-070

A-ZT-500SP-070A-DS-500SP-070

A-ZT-500TG-070A-DS-500TG-070

7

ZirTiDES

A-ZT-425-085A-DS-425-085

A-ZT-425SP-085A-DS-425SP-085

A-ZT-425TG-085A-DS-425TG-085

A-ZT-500-085A-DS-500-085

A-ZT-500SP-085A-DS-500SP-085

A-ZT-500TG-085A-DS-500TG-085

8.5

ZirTiDES

A-ZT-425-100A-DS-425-100

A-ZT-425SP-100A-DS-425SP-100

A-ZT-425TG-100A-DS-425TG-100

A-ZT-500-100A-DS-500-100

A-ZT-500SP-100A-DS-500SP-100

A-ZT-500TG-100A-DS-500TG-100

10

ZirTiDES

A-ZT-425-115A-DS-425-115

A-ZT-425SP-115A-DS-425SP-115

A-ZT-425TG-115A-DS-425TG-115

A-ZT-500-115A-DS-500-115

A-ZT-500SP-115A-DS-500SP-115

A-ZT-500TG-115A-DS-500TG-115

11.5

ZirTiDES

A-ZT-425-130A-DS-425-130

A-ZT-425SP-130A-DS-425SP-130

A-ZT-425TG-130A-DS-425TG-130

A-ZT-500-130A-DS-500-130

A-ZT-500SP-130A-DS-500SP-130

A-ZT-500TG-130A-DS-500TG-130

13

ZirTiDES

A-ZT-425-150A-DS-425-150

A-ZT-425SP-150A-DS-425SP-150

A-ZT-425TG-150A-DS-425TG-150

A-ZT-500-150A-DS-500-150

A-ZT-500SP-150A-DS-500SP-150

A-ZT-500TG-150A-DS-500TG-150

15

ZirTiDES

A-ZT-425-180-

- - - - - 18

ZirTiDES

A-VT-425 A-TG-VT-M A-VT-500 A-TG-VT-W


Premium SP and Kohno SP implants: The length includes the portion relating to the bevel (the counter-conical upper portion of the collar that brings the crown diameter back to the diameter of the connection platform). It is equal to the length of the holes produced by the relative drills. If you want to leave the juxta-osseous bevel, simply screw the implants up to the desired level.

15.00 15.00

13.00 13.00

11.50 11.50

10.00 10.00

8.50 8.50

7.00 7.00

15.00 15.00

18.00

13.00 13.00

11.50 11.50

10.00 10.00

8.50 8.50

7.00 7.00

ø 4.85 ø 5.60

ø 4.85 ø 5.60

ø 4.25 ø 5.00

ø 4.85 ø 5.60

ø 4.85 ø 5.60

ø 4.85 ø 5.60

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.85 ø 5.60

ø 4.25 ø 5.00

ø 4.25 ø 5.00

1

1 1 1 1

1 1 1 1

1 1 1 1

1 1 1 1

8 8 8 8

7 7

15.00 15.00

13.00 13.00

11.50 11.50

10.00 10.00

8.50 8.50

7.00 7.00

6.00 6.00

ø 4.80 ø 5.80

ø 4.80 ø 5.80

ø 4.80 ø 5.80

ø 4.80 ø 5.80

ø 4.80 ø 5.80

ø 4.80 ø 5.80

ø 4.80 ø 5.80

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 3.32 ø 4.22

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

ø 4.25 ø 5.00

2.20 2.20

2.20 2.20

2.20 2.20

2.20 2.20

2.20 2.20

2.20 2.20

2.20 2.20


16

THE KOHNO STRAIGHT, KOHNO SP, KOHNO TG RANGE

L. mm Ø 3.80 mm Ø 4.25 mm


8.5

DES

- - - - - -

10

DES K-DS-380-100 K-DS-380SP-100 K-DS-380TG-100 K-DS-425-100 K-DS-425SP-100 K-DS-425TG-100

11.5


13


15


18

DES K-DS-380-180

- -

K-DS-425-180

- -


A-VT-380 A-TG-VT-M A-VT-425 A-TG-VT-M

15.00

13.00

11.50

10.00

15.00

18.00 18.00

13.00

11.50

10.00

ø 4.80

ø 4.80

ø 4.80

ø 4.80

ø 2.85

ø 2.85

ø 2.85

ø 2.85

ø 2.85

ø 2.85 ø 2.95

ø 2.85

ø 2.85

ø 2.85

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80 ø 4.25

ø 3.80

ø 3.80

ø 3.80

2.20

2.20

2.20

2.20

10.00ø 4.45

ø 2.85ø 3.80

ø 3.80

15.00

13.00

11.50

ø 4.45

ø 4.45

ø 4.45

ø 2.85

ø 2.85

ø 2.85

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

ø 3.80

15.00

13.00

11.50

10.00

15.00

13.00

11.50

10.00

ø 4.85

ø 4.85

ø 4.25

ø 4.85

ø 2.95

ø 2.95

ø 2.95

ø 2.95

ø 2.95

ø 2.95

ø 2.95

ø 2.95

ø 4.25

ø 4.25

ø 4.25

ø 4.25

ø 4.25

ø 4.25

ø 4.25

ø 4.25

ø 4.25

ø 4.85

ø 4.25

ø 4.25

15.00

13.00

11.50

10.00

ø 4.80

ø 4.80

ø 4.80

ø 4.80

ø 2.95

ø 2.95

ø 2.95

ø 2.95

ø 4.25

ø 4.25

ø 4.25

ø 4.25

2.20

2.20

2.20

2.20

17

Ø 5.00 mm Ø 6.00 mm L. mm


- - -

K-DS-600-085

- -8.5

DES

K-DS-500-100 K-DS-500SP-100 K-DS-500TG-100 K-DS-600-100

- -10

DES

K-DS-500-115 K-DS-500SP-115 K-DS-500TG-115 K-DS-600-115

- -11.5

DES

K-DS-500-130 K-DS-500SP-130 K-DS-500TG-130

- - - 13

DES

- - - - - - 15

DES

- - - - - - 18

DES

A-VT-500 A-TG-VT-W A-VT-600


- Kohno, Kohno SP and Kohno TG implants are available only with the DES surface.

13.00

11.50

10.00

13.00

11.50 11.50

10.00 10.00

8.50

ø 5.60

ø 5.00

ø 5.60

ø 4.22

ø 4.22

ø 4.22

ø 4.22

ø 4.22 ø 4.25

ø 4.22 ø 4.25

ø 4.25

ø 5.00

ø 5.00

ø 5.00

ø 5.00

ø 5.00 ø 6.00

ø 5.00 ø 6.00

ø 6.00

ø 5.00

ø 5.60

ø 5.00

13.00

11.50

10.00

ø 5.80

ø 5.80

ø 5.80

ø 4.22

ø 4.22

ø 4.22

ø 5.00

ø 5.00

ø 5.00

2.20

2.20

2.20


18

IMPLANT SYSTEM

Cold plasma surface decontamination

Implant after the decontamination treatment

Implant before the decontamination treatment

The better the processes of passivation, cleaning and decontamination of an implant surface, the greater the presence of pure titanium on its surface, which proportionally increases the possibilities of osseointegration.At the end of the surface treatments, the implants are subjected to a careful cleaning and decontamination process by means of cold plasma triggered in Argon after first being cleaned of the main processing residue with numerous washing cycles in specific solvents.What is decontamination? It is the total removal of dirt and particle residue from the surface of the implants.During the Argon treatment, the gas atoms are partially ionised, they acquire energy and “bombard” the surface of the fixture violently. This kind of “atomic sand-blasting” removes organic contaminants without leaving any traces or additional residuals.

As known, Argon is an inert gas that does not react with the titanium surfaces. The condition of surface decontamination is controlled regularly with randomised analyses of Bioburden residuals and a SEM visual examination on all the batches produced. This process activates the ionisation of the atoms on the surface of the titanium oxide which in turn increases the wettability of the fixture.

Working plasma reactor during surface decontamination of the implants

19

Implant packaging The implants are packaged in PMMA vials in which they are held/housed in special titanium baskets that protect the surface of the fixture against possible recontaminations due to contact. All the materials comprising the packaging have been suitably tested to verify their suitability to sterilisation, preservation and medical use.

The blister packs containing the implants are packed in cardboard boxes which also contain the labels for the patient records reporting the details for traceability of the product (code and batch number).

Upon opening of the vial, the implants appear with the visible connection ready to be engaged by the drivers.

A label that changes colour is applied on the bottom of the vial. This label has the property of changing colour from orange to red during sterilisation. When an implant pack is opened, a red label is therefore proof that it has been sterilised. The vials are contained in a special PETG blister pack sealed by a Tyvek cover, which guarantees sterility of the product for 5 years.

The surgical cover screw, supplied with every single implant, is housed in a special compartment in the top of a blue cap made of LDPE which closes the vial. In turn, a small transparent lid in PMMA closes the blue cap.

• Sterilisation is the total elimination of the residual microbial load present on the implant after the decontamination and packing process, it is carried out with the use of beta rays. The sterilisation procedures are carried out in accordance with the UNI EN ISO 13485 and UNI EN ISO 9001 quality standards. A beta ray sterilisation process was chosen because it has a variety of different advantages:

• the process occurs in a completely automatic way with computerised control of all the phases; • the process is quick, reliable and extremely easy to repeat with safety and precision; • the process is extremely eco-friendly, does not require the presence of radioactive sources and does not lead to the formation of toxic or radioactive

products; • beta rays are minimally invasive with regards to packaging due to the speed of the treatment. This guarantees preservation of the product’s sterility over

time (certified duration of 5 years).

Sterilisation

20

Premium cylindrical implants and Kohno conical implants, in both the version with Straight cylindrical emergence and the version with enlarged emergence SP (Switching Platform), while offering different surgical options thanks to their different morphology, have a common connection platform for the prosthodontist which makes the dental surgeon’s job easier.

COLLARImplants with a diameter greater than 3.30 mm have a collar on top of the neck that gives great maximum stability to the connection and aids the correct distribution of the masticatory forces, which are unloaded along the entire implant perimeter. It also creates a stabilising connection for the post, capable of reducing mid-distal and lingual-vestibule movements.The internal part of the collar allows safe and easy engaging of the insertion driver.

INTERNAL HEXAGON FOR REPOSITIONING OF THE PROSTHESISLocated in a coronal position, it is characterised by excellent visibility. The 60° repositioning and the total connection depth of almost 2 mm ensure non-rotation and precision.

BEVELThe widening generated by the bevel in SP implants allows the crestal bone to be distanced from the implant connection by 0.30 mm in a horizontal direction and 0.50 mm in a vertical direction, thus offering a Switching Platform embedded in the morphology of the implant.

STRAIGHT AND SWITCHING CONNECTION PLATFORM

Premium, Premium SP, Kohno and Kohno SP

0.50 mm

0.30 mm

21

INTERNAL HEXAGON FOR REPOSITIONINGOF THE PROSTHESIS Located in a coronal position, it is characterised by excellent visibility. The 60° repositioning and the total connection depth of almost 2 mm ensure non-rotation and precision. The dimensions of the hexagon are the same as in ø 3.80 mm implants.

COLLARIn Premium implants with diameter 3.30 mm, the internal collar performs the same prosthesis stabilising function performed by the external collar in all the other implant diameter dimensions.

Premium Connection Ø 3.30 mm

Premium Ø 3.30 mm Premium Ø 3.80 mm

Same hexagon, but in diameter 3.30 the collar is inside the platform.

In these implant diameters the hexagon is the same, the internal diameter of the collar on top of the hexagon is the same, but it widens externally in the three different diameters.

Connection similarities

Premium Ø 4.25 mm Premium Ø 5.00 / Ø 6.00 mm

22

SWITCHING CONNECTION PLATFORM

Switching PlatformThe Switching Platform is a prosthetic rehabilitation technique that aims to distance the prosthetic connection platform from the cervical bone.In fact, the abutment-implant junction is today indicated as one of the factors responsible for peri-implant bone reabsorption because it can trigger inflammatory reactions.Clinical findings relating to the use of Premium and Kohno Switching Platform implants confirm the reliability of the Switching Platform technique with Premium and Kohno implants.

Diameters being equal, implants with Straight emergence and Switching Platform emergence use the same prosthetic components.The Switching Platform technique used in this case is defined as “implant” since it is incorporated in the implant morphology.

Ground Section of Premium Switching Platform implant 4 months after insertion.

Image by kind permission of Dr D. Botticelli

23

If the morphology of the receiving bone does not allow the use of implants with an enlarged coronal diameter and it is therefore necessary to use an implant with a straight coronal emergence, it is still possible to employ a prosthetic Switching Platform on implants with diameter 3.80 mm, using a post with a smaller diameter (3.30 mm).

Standard ø 3.30 post which rests on the external collar of an implant with diameter 3.80 mm

With this configuration the Switching Platform that can be obtained on either side is 0.325 mm horizontally and 0.35 mm vertically giving a total of 0.725 mm on each side.

If implants with SP emergence can be used and you want to maximise mismatching between the level of the bone crest and the join between implant and prosthesis, the combined use of an SP implant and a post with a smaller diameter, as in the drawing below, allows you to obtain a highly accentuated Switching Platform.

With this configuration, with a ø 3.80 mm SP implant and a ø 3.30 mm post the total Switching Platform that can be obtained on either side is 1.25 mm.

with a straight coronal emergence, it is stismaller diameter (3.30 mm).

WARNING: Considering the reduced diameter of Ø 3.30 mm prosthetic components, it is recommended to use them to obtain Switching Platform with 3.80 mm implants exclusively for single crown in front sectors (excluding premolars), while in distal sectors they must be used exclusively as a support for multiple prostheses.

Switching Platform on Straight implants Ø 3.80 mm

Switching Platform on SP implants Ø 3.80 mm

24242424

TG (TRANSGINGIVAL) CONNECTION PLATFORM

Premium TG and Kohno TG The implants of the Premium TG and Kohno TG system have two connection platforms:• the “M” (Medium) connection, which has a platform with external diameter 4.80 mm, common to both Premium TG and Kohno TG implants with

diameters of 3.30, 3.80 and 4.25 mm • the “W” (Wide) connection, which has an external diameter of 5.80 mm and is only present in implants with a diameter of 5.00 mm, in this case too both

Premium TG and Kohno TG The M or W version is also present in the product codes of the prosthetic components, making it easy to identify the pieces to be used for reconstruction.

20° CONICAL SEAL This part of the connection makes use of the conical friction concept in direct screw-retained solutions. The friction guarantees high resistance against unscrewing, and also acts as an excellent anti-bacterial seal.

COUPLING PLATE The W emergence is very wide, which has led to the development of prosthetic components with a wider diameter. This makes them more stable and, thanks to the coupling plate, more resistant to chewing loads coming from the molar and premolar sectors.

SUPPORTING SHOULDER The supporting shoulder of the implant-prosthetic connection is formed by a wide external bevel with a 30° taper which contains the connection well.

INTERNAL COLLAR As for submerged Premium and Kohno implants, it is the anchoring point for the insert drivers.

INTERNAL HEXAGON FOR REPOSITIONING OF THE PROSTHESIS The hexagons of Premium TG and Kohno TG implants have the same dimensions as the submerged Premium and Kohno implants. This allows the optimisation of surgical instruments, increasing the flexibility of the entire family implants, because the same drivers and accessories are used.

“M” CONNECTION “W” CONNECTION

25

REPOSITIONABLE POSTS AND ABUTMENTS WITH PASSING SCREWThe hexagon positioned at the base of the connection cone allows using repositionable solutions, which are fixed to the implants with the aid of a passing screw.

The connecting screw of the posts descends into the inside of the connection, thus minimising the lever fulcrum during the application of the loads and preventing the loosening of the connecting screws.

This patented connection design feature allows modelling of the posts with perfect angulations and profiles because the presence of the screw head does not interfere with the personalisation and insertion of the over-structure.

SOLID POSTS AND ABUTMENTS The presence of a coupling cone allows the use of pre-made prosthetic components with a single body: these solutions are screwed to the prosthetic platforms without the need for separate screws. Of course, they are not repositionable, and cannot be removed once screwed into the site.

Protection caps and practical closed-tray caps are available for abutments and posts which allow the impression to be taken in the mouth on the post screwed onto the implant.

Thanks to the conical friction, once the solid components have been tightened they give an extremely high tightening capacity because the unscrewing torque needed to remove them would be very high.

60° cut

30° cut

26

implant morphology

Premium Kohno

implant Ø 3.30 Straight 3.80 Straight 4.25 Straight 5.00 Straight 6.00 Straight

referencecolour code on

surgical tray

colour code(on pack)

maximumemergence Ø connectionplatform Ø

collar external Ø

maindimensions

connection driver hexagon

colour code

easy insert

Hexagon: 2.30 mm Hexagon: 2.30 mm Hexagon: 2.50 mm Hexagon: 2.50 mm Hexagon: 2.50 mm

implant basket colour code

standard final drill

Ø 2.80 mm Ø 3.00 mm Ø 3.40 mm Ø 4.25 mm Ø 5.40 mm

tightening screw (thread and colour)

M 1.8 M 1.8 M 2.0 M 2.0 M 2.0

transfer colour code

analog colour code

CODE SUMMARY TABLE

ø 3.20 ø 3.60 ø 3.90 ø 3.90

ø 3.30 ø 3.80 ø 4.25 ø 5.00 ø 6.00

27

Premium SP Kohno SP Premium TG Kohno TGimplant

morphology

3.80 SP 4.25 SP 5.00 SP 3.30 TG 3.80 TG 4.25 TG 5.00 TG implant Ø

referencecolour code on

surgical tray

colour code(on pack)

maximumemergence Ø connectionplatform Ø

collar external Ø

maindimensions

connection driver hexagon

colour code

Hexagon: 2.30 mm Hexagon: 2.50 mm Hexagon: 2.50 mm Hexagon: 2.30 mm Hexagon: 2.30 mm Hexagon: 2.30 mm Hexagon: 2.50 mm

easy insert

implant basket colour code

Ø 3.00 mm Ø 3.40 mm Ø 4.25 mm Ø 2.80 mm Ø 3.00 mm Ø 3.40 mm Ø 4.25 mm

standard final drill

M 1.8 M 2.0 M 2.0 M 1.8 M 1.8 M 1.8 M 2.0

tightening screw (thread and colour)

transfer colour code

analog colour code

ø 3.20 ø 3.60 ø 3.90

ø 4.45 ø 4.85 ø 5.60

ø 3.80 ø 4.25 ø 5.00 ø 3.30 ø 3.80 ø 4.25 ø 5.00

ø 4.80 ø 4.80 ø 4.80 ø 5.80

28

SURGICAL PROCEDURE

The surgical procedure of insertion is extremely simple. The implant does not require a mounter for inserting into the implant site because it is engaged directly inside the connection by practical Easy Insert drivers designed to guarantee a safe grip, to prevent deformations to the corners of the connections and at the same time to allow easy removal from the implant wells.

The Easy Insert drivers aid visibility of the operating field, do not occupy much space, and allow adjusting the connection hexagon properly because their hexagonal visual index is the same as a prosthetic index.

Engagement is extremely safe and reliable with the use of a special titanium o-ring that engages inside the connection.

The presence of a wide hexagon at the base of the prosthetic cone allows easy and safe engagement of the Easy Insert drivers for easy and safe insertion of the implants into the respective sites.

The colour code on the instrument shank and on the retaining metal o-rings facilitates the identification and choice of the item needed.

Mountless surgical procedure

BONE LEVEL IMPLANTS TG IMPLANTS

29

The image on the left shows how a traditional instrument (in green) edges inside the connection (in grey). This geometry inevitably determines the grip and deformation of the actual session.

The special design of the Easy Insert drivers (in green in the section on the right) enables the driver and implant to interact on a portion of the surface in the centre of the connection hexagon.

Easy Insert drivers are available with two different hexagons, characterised by the colours blue and magenta, to be used according to the implant connection.

Blue drivers are used for implants with diameter Ø 3.30 mm and Ø 3.80 mm while magenta drivers are used for larger diameters (Ø 4.25, Ø 5.00 and Ø 6.00 mm), except the TC version Ø 4.25 mm which uses the blue driver.


Premium Kohno

Premium SP Kohno SP

-

Premium TG Kohno TG

-

The dodecagonal design of the drivers prevents deformations to the implant connection, thus guaranteeing extremely high prosthetic stability and precision.







with passing screw




Overdentures


General

SURGICAL INSTRUMENTS

32

PREMIUM KOHNO SURGICAL KITin a single kit all the surgical instruments for the whole Premium and Kohno range, in all versions (Straight, SP, TG).

KOHNO SURGICAL KITPREMIUM SURGICAL KIT

A single kit complete with all the indispensable instruments to ensure the surgeon of the rapid availability of everything needed for the most varied surgical necessities. It also contains prosthetic drivers for the connecting screws of posts and abutments.

Alternatively, small kits are available for only Premium cylindrical implants, for only Kohno conical implants , kits of only prosthetic drivers, simplified kits. For details of the content, see the following pages.

33

All the surgical kits include a practical torque-control ratchet that acts as a surgical key for inserting the implants and as a dynamometric key for checking the tightening torque of the prosthetic screws. The torque-control ratchet has a very small head, making it easy to use even in distal sectors. This torque-control ratchet is also included in the Screw Kit.

All the kits consist of practical boxes in Radel with a surgical tray inside that is set-up to hold the instruments according to a guided procedure. The sequences of use of the instruments and their arrangement are indicated and facilitated by coloured marks.

SHORTY DRILLING KIT SCREW KITONEBOX

34


The surgical kits for the Premium/Kohno implant system have been designed for maximum simplicity and ergonomics and are available in three versions:

The surgical kits

The instrument codes are printed on the trays to allow the assistants to easily reposition them after cleansing and cleaning.

The standard surgical kits contain the stops for safely using the drills (they do not include countersinks and bone profilers). These stops are extremely practical because they allow manually inserting and removing drills in tip -> shank direction. The instruments contained in the kits are all made of stainless steel specifically for surgical use.

Premium Kohno surgical kit: contains all the surgical and prosthetic instruments* needed for all the implants in the Premium and Kohno families (in all morphologies: Straight, Switching Platform and Transgingival).

Premium surgical kit: contains all the surgical and prosthetic instruments* needed only by users of the implants in the Premium family (in all morphologies: Straight, Switching Platform and Transgingival).

Kohno surgical kit: contains all the surgical and prosthetic instruments* needed only by users of the implants in the Kohno family (in all morphologies: Straight, Switching Platform and Transgingival); it is particularly simple, immediate and complete.

The surgical kits also contain templates for the graphic representation of the implant measurements to allow choosing the most suitable implant diameters and lengths by means of x-ray or tomographic methods. Two test implants for practical exercises are also supplied with the kits (not to be used on patients because they are anodised and not sterile), as well as the surgical manual for Premium and Kohno implants. A maintenance set for the dynamometric ratchet is also supplied, including the driver for quick torque adjustment and a tube of lubricating gel for torque-control ratchet maintenance.

* To guarantee maximum duration of the surgical and prosthetic instruments, it is advisable to follow the recommended cleansing and sterilisation procedures.

35

code description

ZPREKOH*

PREKOH-KIT*

Surgical kit complete with the instruments necessary for Premium and Kohno implants (Straight, SP and TG)

Radel instrument tray for Premium and Kohno instruments(Straight, SP and TG)

ZPREMIUM*

PRE-KIT*

Surgical kit complete with the instruments necessary for Premium implants (Straight, SP and TG)

Radel instrument tray for Premium implants (Straight, SP and TG)

ZKOHNO*

KOH-KIT*

Surgical kit complete with the instruments necessary for Premium implants (Straight, SP and TG)

Radel instrument tray for Kohno implants (Straight, SP and TG)

GROMMET-3 Kit with 5 spare silicon supports for surgical trays, for drills or instruments with right angle shanks

GROMMET-4 Kit with 5 spare silicon supports for surgical trays, for hand use instruments or hand knobs

GROMMET-5 Kit with 5 spare silicon supports for surgical trays, for digital or manual handheld instruments

* The words ZPREKOH*, PREKOH-KIT*, ... are followed by a letter and a number that indicate the revision of the surgical kit. The contents of the surgical kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

36

code description

ZAONEBOX*

AONEBOX-KIT*

OneBox surgical kit complete with the instruments for Premium and Kohno implants (Straight, SP and TG)

OneBox Radel instrument tray for Premium and Kohno instruments (Straight, SP and TG)

GROMMET-CA-1 Kit with 5 spare silicon supports for surgical trays, for drills or instruments with right angle shanks

GROMMET-CA-2 Kit with 5 spare silicon supports for surgical trays, for instruments fitted with connection hexagon


The OneBox surgical kit was created to meet the needs of surgeons who carry out a large number of implant operations and therefore want to have a compact kit equipped essentially with all that is needed only for the surgical phase.The OneBox is a compact kit that is easy to carry, containing the surgical instruments strictly necessary for inserting Premium and Kohno implants (Straight, SP and TG).

OneBox

It does not contain drill stops or prosthetic drivers, but it contains all the drivers in the one-piece hand use version and the right angle version, which are much more practical during surgical procedures.

This kit contains space for an additional series of alternative drills, which the surgeon may wish to choose and use depending on his experience.

The bone taps are present in the kit in the version with right angle attachment.

To guarantee maximum duration of the surgical and prosthetic instruments, it is advisable to follow the recommended cleansing and sterilisation procedures.

37

code description

ZSCREW*

SCREW-KIT*

Screw kit complete with prosthetic instruments

Radel instrument tray for Screw kit


GROMMET-CA-2 Kit with 5 spare silicon supports for surgical trays, for instruments fitted with connection hexagon

The Sweden & Martina Screw kit is a handy set containing the drivers necessary for the prosthetic phases, from the removal of the Premium Kohno transgingival healing screws (Straight, SP and TG) to the final fastening of the over-structures, the drivers for standard abutments, straight profile P.A.D. and Locators and the drivers for ball attachments.

Screw kit

* The words ZONEBOX*, ZSCREW*, are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

It includes digital and right angle drivers, a carrier for angled P.A.D. abutments and a dynamometric ratchet.

Small and easy to carry, it allows simple and immediate management of the prosthetic rehabilitation phase after surgery.

To guarantee maximum duration of the surgical and prosthetic instruments, it is advisable to follow the recommended cleansing and sterilisation procedures.

38


Initial, intermediate and countersink drillsAll Sweden & Martina drills are made of surgical stainless steel with high resistance to corrosion and wear. The extreme accuracy of design and production allows use completely free from vibrations and oscillations.

Precision drill: very sharp and precise, it facilitates the opening of the implant site especially in the case of very hard cortical bone.

Intermediate drills: the shape with progressive diameter of the 2 intermediate drills allows gradual expansion of the bone when using a drill with a diameter much larger than the previous one, so as to reduce bone stress to a minimum.

Pilot drill: the different heights of the laser markings allow better visibility in the surgical field and greater ease of recognition of the different depths during use.

Countersink drill: ideal for preparing the coronal part of the site in the case of implants with a prosthetic platform wider than the diameter of the spires.

39All measurements are given in mm, unless indicated otherwise.

initial drill, intermediate drills and countersink drill kit

FS-230precision drill

FG-200/280XSintermediate drillø 2.00 - 2.80 mm

FG-330/425XSintermediate drillø 3.30 - 4.25 mm

FC-XScountersink drill

ZPREKOH*ZPREMIUM*ZKOHNO*

ZAONEBOX*

Lp

Lt

8.57.0 10.0 11.5 13.0 15.0 18.0

Lt: Total length of the working part, including the tip.Lp: Length of the tip. This measurement must be calculated in addition

to the length of the preparation hole.

pilot drill pilot drill stops kit

FPT**-200-LXSpilot drill

STOP***200-0707.00 mm

pilot drill stop

STOP***200-0858.50 mm

pilot drill stop

STOP***200-10010.00 mm

pilot drill stop

STOP***200-11511.50 mm

pilot drill stop

STOP***200-13013.00 mm

pilot drill stop

STOP***200-15015.00 mm

pilot drill stop

ZPREKOH*ZPREMIUM*ZKOHNO*

ZAONEBOX*

P***200- P***200-1 OP***200-13 00 mm

OP***200-15.00 mmil t d ill t

Please note: The initial drills (FPT*) and the final drills (FFT*, shown on the following page and FKT*, shown on page 43) always make a hole longer than the implant that is to be inserted. The oversizing (Lp) is equal to the height of the tip of the drill that is being used. See drawing above.

* The words ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX* are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

** The abbreviations FPT, FFT and FKT are followed by a number (2, 3) indicating the length of the drill shank: 2 indicates a length of 12.5 mm, 3 indicates a length of 14 mm. All the STOP2 and STOP3* are functional to any of these batches.

*** The word STOP is followed by a number indicating the revision of the accessory. The stops are included only in the surgical kits ZPREKOH*, ZPREMIUM* and ZKOHNO*

4.80

8.50 8.50

ø 2.00 ø 3.30ø 2.80 ø 4.25

ø 5.60ø 4.45 ø 4.85

ø 4.10

10.00 10.00045

0.58

19.30

40


Final drills and stopsAlso made of surgical stainless steel with high resistance to corrosion and wear, Premium Kohno final drills present a number of cutting edges proportional to the hole diameter, so as to allow a continuous and homogeneous cutting movement and greater instrument stability during operation. All this enables high-precision implant preparations to be obtained, with consequent ease in inserting the implant.

The surgical drills have a spiral designed to allow the operator better control of the forward movement and better centring during the drilling phase.

The coloured rings make it easy to recognise the dedicated instruments for each implant diameter.

The stops are inserted from the tips of the drills, with great ease and speed.

41All measurements are given in mm, unless indicated otherwise.

Please note: The drills always make a hole that is longer than the implant to be inserted. The oversizing (Lp) is equal to the height of the tip of the drill that is being used (see drawing on page 39 for the key).

* The abbreviations FFT and STOP are followed by a number (2, 3) indicating the length of the drill shank: 2 indicates a length of 12.5 mm, 3 indicates a length of 14 mm. All the STOP2 and STOP3 are functional to any of these batches.

** The words ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX* are followed by a letter and a number that indicate the revision of the surgical kit. The contents of the surgical kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

implantdiameter

Ø 3.30 mm Ø 3.80 mm Ø 4.25 mm Ø 5.00 mm kit

drills **

FFT*-280-LXS FFT*-300-LXS FFT*-340-LXS FFT*-425-LXS

ZPREKOH**ZPREMIUM**ZKOHNO**

ZAONEBOX**

stop

STOP*-280-070 STOP*-300-070 STOP*340-070 STOP*-425-070


STOP*-280-085 STOP*-300-085 STOP*-340-085 STOP*-425-085










FFT* 280 LXS FT* 300 LXS FT* 340 LXS FFT* 425 LXS

TOP* 280 115 TOP* 340 115 STOP* 425 115TOP* 300 115

TOP*-280-130 P*-300-130 TOP*-340-130 STOP*-425-130

TOP*-280-150 TOP*-340-150 STOP*-425-150TOP*-300-150

19.60 19.60 19.70 20.00

0.81 0.87 0.95 1.23

42424242424242


Always made of surgical stainless steel with high resistance to corrosion and wear, the final conical drills for Kohno implants (Straight, SP and TG) are characterised by four straight cutting edges.

Final conical drills and their stops

Laser marking: the 0.8 mm thickness of the laser marking corresponds to the height of the polished neck of the implants, thus allowing precise control of the depth of preparation of the surgical site.

Straight edge cut: the straight edge cut gives a great cutting capacity and allows much of the bone removed to be collected.

43

implantdiameter

Ø 3.80 mm Ø 4.25 mm Ø 5.00 mm Ø 6.00 mm kit

8.50 - - -

FKT*-600-085

ZKOHNO**

10.00

FKT*-380-100 FKT*-425-100 FKT*-500-100 FKT*-600-100

ZKOHNO**

11.50

FKT*-380-115 FKT*-425-115 FKT*-500-115 FKT*-600-115

ZKOHNO**

13.00

FKT*-380-130 FKT*-425-130 FKT*-500-130

- ZKOHNO**

15.00

FKT*-380-150 FKT*-425-150

- - ZKOHNO**

18.00

FKT*-380-180 FKT*-425-180

- - -

stop

STOP*-380 STOP*-425 STOP*-500 STOP*-600

ZKOHNO**

Please note: The drills always make a hole that is longer than the implant to be inserted. The oversizing (Lp) is equal to the height of the tip of the drill that is being used (see drawing on page 39 for the key).

* The abbreviations FKT and STOP are followed by a number (2, 3) indicating the length of the drill shank: 2 indicates a length of 12.5 mm, 3 indicates a length of 14 mm. All the STOP2 and STOP3 are functional to any of these batches.

** The words ZPREKOH*, ZPREMIUM*, ZKOHNO* are followed by a letter and a number that indicate the revision of the surgical kit. The contents of the surgical kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

FKT* 600 085

****

** 50

All measurements are given in mm, unless indicated otherwise.

16.50

18.00

19.50

21.50

24.50

16.50

18.00

19.50

21.50

24.50

16.50

18.00

19.50

16.50

18.00

15.00

0.61

0.61

0.61

0.61

0.61

0.66

0.66

0.66

0.66

0.66

0.78

0.78

0.78

0.90

0.90

0.90

44


4444444444444444444444

Drills for distal sectorsAs an option, shorter drills are available that are very practical in distal sectors with limited oral opening. They come in a wide range of diameters and are also useful for preparations in extremely compact bone where, in the most coronal portion, you want to widen the preparation diameter by 0.10 mm with respect to the size of the standard drills to facilitate the insertion of the implants. On the other hand, in low-density bone they can be used to under-prepare the implant site so as to obtain optimum primary stability.

The drills have etched depth lines from 7 to 15 mm.

45


FPT5-200-LXScylindrical drill ø 2.00 mm

FFT5-280-LXScylindrical drill ø 2.80 mm










FFT5 280 LXS

15.50

0.58

15.50

0.81

15.50

0.87

FFT5 425 LXS FFT5 445 LXS

15.50

0.95

15.50

0.92

15.50

0.98

15.50

1.06

15.50

1.23

15.50

1.28

FT5 290 LXS

15.50

0.84

Cylindrical drills*

Lp

Lt

8.57.0 10.0 11.5 13.0 15.0

Please note: The drills always make a hole that is longer than the implant to be inserted. The oversizing (Lp) is equal to the height of the tip of the drill that is being used. See drawing above.


* The drills for distal sectors are without irrigation and are not included in any surgical kit. They cannot be used with depth stops.

46

code description

OS-KON-KIT*

OS-KO-TRAY*

Complete set of osteotomes for Kohno implants (Straight, SP and TG) composed of:- Radel instrument tray OS-KO-TRAY- Osteotomes for implants ø 3.80, h. 11.5, 11 and 15 mm, round tip- Osteotomes for implants ø 4.25, h. 11.5, 11 and 15 mm, round tip- Osteotomes for implants ø 5.00, h. 11.5, 11 and 15 mm, round tip- Osteotomes for implants ø 6.00, h. 8.5, 10 and 11.5 mm, round tip

Radel instrument tray for osteotomes for Kohno implants (it can hold up to 12 instruments)


OsteotomesA set of steel osteotomes is available, useful for maxillary sinus floor expansion and lift protocols via the crestal bone. The particular design of the tips, which follow the profile of each different implant in the range, allows the creation of particularly precise sites even after the compacting of very spongy bone matrix.

Osteotomes: the laser-etched codes on the handles show the diameter and height of the corresponding implant, so as to facilitate recognition of the correct surgical sequence.

* To guarantee maximum duration of the surgical and prosthetic instruments, it is advisable to follow the recommended cleansing and sterilisation procedures.

47

implantdiameter

Ø 3.80 mm Ø 4.25 mm Ø 5.00 mm Ø 6.00 mmkit

tip round round round flat round flat

8.50 - - - -

BE-43-55-PS

- OS-KON-KIT*

10.00

OS-KO-380-10 OS-KO-425-10 OS-KO-500-10 OS-KO-500-10SV OS-KO-600-10 OS-KO-600-10SV

-

11.50

OS-KO-380-115 OS-KO-425-115 OS-KO-500-115 OS-KO-500-115SV OS-KO-600-115 OS-KO-600-115SV

OS-KON-KIT*(solo punta tonda)

13.00

OS-KO-380-13 OS-KO-425-13 OS-KO-500-13 OS-KO-500-13SV

- -OS-KON-KIT*(only round tip)

15.00

OS-KO-380-15 OS-KO-425-15 OS-KO-500-15 OS-KO-500-15SV

- -OS-KON-KIT*(only round tip)

OSTEOTOMES FOR KOHNO IMPLANTS, STRAIGHT, SP AND TG

* The code OS-KON-KIT, is followed by a letter and a number that indicate the revision of the kit. The contents of the kit may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

48


OSTEOTOMES FOR PREMIUM IMPLANTS, STRAIGHT, SP AND TG

code description

E-OS-020-PP

Osteotome Ø 0.20 flat tip

E-OS-090-PP

Osteotome Ø 0.90 flat tip

E-OS-160-PC

Osteotome Ø 1.60 concave tip

E-OS-200-PC


E-OS-240-PC


8.50

8.50

8.50

8.50

8.50

11.50

11.50

11.50

11.50

11.50

13.00

13.00

13.00

13.00

13.00

15.00

15.00

15.00

15.00

15.00

18.00

18.00

18.00

18.00

18.00

10.00

10.00

10.00

10.00

10.00

7.00

7.00

7.00

7.00

7.00


49

implantdiameter

Ø 3.30 mm Ø 3.80 mm Ø 4.25 mm Ø 5.00 mm Ø 6.00 mm kit

standard bone taps

A-MS-330 A-MS-380 A-MS-425 A-MS-500 A-MS-600


right angle bone taps

A-MS-330-CA A-MS-380-CA A-MS-425-CA A-MS-500-CA A-MS-600-CA

ZAONEBOX**

short bone taps*

A-MSC-330 A-MSC-380 A-MSC-425 A-MSC-500 A-MSC-600

-

A M A M A M A M

8.00

8.00

8.00

8.50

8.50 8.50 8.50 8.50

8.50

8.508.50

8.50

8.50

8.50

8.50

11.00

11.00

11.00

11.50

11.50 11.50 11.50 11.50

11.50

11.5011.50

11.50

11.50

11.50

11.50

13.00

13.00

13.00

13.00

13.00

13.00

13.00

13.00

13.00

13.00

9.50

9.50

9.50

10.00

10.00 10.00 10.00 10.00

10.00

10.0010.00

10.00

10.00

10.00

10.00

6.50

6.50

6.50

7.00

7.00 7.00 7.00 7.00

7.00

7.007.00

7.00

7.00

7.00

7.00

Bone taps

** The codes ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX* are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

Right angle bone tap: for greater control of the inserting axis and more uniform preparation.

Short bone tap: for use with the dynamometric key, it is very useful in distal sectors.

Standard bone tap: for use with the dynamometric key.

* Please note: short bone taps are not included in any surgical kit, they are available as options.

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

18.00

18.00

18.00

18.00


50505050505050


All the additional instruments for inserting Premium and Kohno implants (Straight, SP e TG), made of surgical stainless steel, have been designed to offer maximum ergonomics and ease of use. All the instruments have a laser-marked code for easy identification of the pieces. All the instruments are available individually as spare parts.

Additional instruments

Steel drivers: Solid help for removing implants.

Patented geometry: The particular geometry of the he-xagon helps limit sticking and prevents deformations in the implant connection.

Parallelism pins: It is always advisable to check the preparation axis of surgical sites.

51

Hand Drivers and right angle Drivers

code desciption kit

EASYC2-EX230-CA

Short manual driver, with right angle shank, for implants:- ø 3.30 and ø 3.80 mm Premium and Kohno (Straight and SP)- ø 3.30, ø 3.80 and ø 4.25 mm Premium and Kohno (TG)

ZPREKOH*ZPREMIUM*ZKOHNO*ZAONEBOX*

EASYL2-EX230-CA

Long manual driver, with right angle shank, for implants:- ø 3.30 and ø 3.80 mm Premium and Kohno (Straight and SP)- ø 3.30, ø 3.80 and ø 4.25 mm Premium and Kohno (TG)


EASY2-EX230-EX

Manual driver with connector for dynamometric key, for implants:- ø 3.30 and ø 3.80 mm Premium and Kohno (Straight and SP)- ø 3.30, ø 3.80 and ø 4.25 mm Premium and Kohno (TG)


EASYC2-EX250-CA

Short manual driver, with right angle shank, for implants:- ø 4.25, 5.00 and ø 6.00 mm Premium and Kohno (Straight and SP)- ø 5.00 mm Premium and Kohno (TG)


EASYL2-EX250-CA

Long manual driver, with right angle shank, for implants:- ø 4.25, 5.00 and ø 6.00 mm Premium and Kohno (Straight and SP)- ø 5.00 mm Premium and Kohno (TG)


EASY2-EX250-EX

Manual driver with connector for dynamometric key, for implants:- ø 4.25, 5.00 and ø 6.00 mm Premium and Kohno (Straight and SP)- ø 5.00 mm Premium and Kohno (TG)


EASYC2 EX230 CA

EASYL2 EX230 CA

EASYC2-EX230-CA

EASY2 EX230 EX

EASYL2-EX230-CA

EASYC2-EX250-CA

EASY2-EX230-EX

EASYL2-EX250-CA

EASYC2 EX250 CA

EASY2-EX250-EX

* The words ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX* are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

52

Mounters

code description kit

MOU-EX230

Mounter, for implants:- ø 3.30 and ø 3.80 mm Premium and Kohno (Straight and SP)- ø 3.30, ø 3.80 and ø 4.25 mm Premium and Kohno (TG)


MOU-EX250

Mounter, for implants:- ø 4.25, 5.00 and ø 6.00 mm Premium and Kohno (Straight and SP)- ø 5.00 mm Premium and Kohno (TG)


CM2

Mounter stop key




BC-EX230

Short driver, for implants:- ø 3.30 and ø 3.80 mm Premium and Kohno (Straight and SP)- ø 3.30, ø 3.80 and ø 4.25 mm Premium and Kohno (TG)


BL-EX230

Long driver, for implants:- ø 3.30 and ø 3.80 mm Premium and Kohno (Straight and SP)- ø 3.30, ø 3.80 and ø 4.25 mm Premium and Kohno (TG)


BC-EX250

Short driver, for implants:- ø 4.25, 5.00 and ø 6.00 mm Premium and Kohno (Straight and SP)- ø 5.00 mm Premium and Kohno (TG)


BL-EX250

Long driver, for implants:- ø 4.25, 5.00 and ø 6.00 mm Premium and Kohno (Straight and SP)- ø 5.00 mm Premium and Kohno (TG)


BC EX250

BL EX250

53* The codes ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if

Sweden & Martina considers it opportune to develop or improve them.

Parallelism pins

Surgical screwdrivers


PP-2/28

Parallelism pins with one side ø 2.00 and the other ø 2.80 mm



HSMXS-20-DG

Screwdriver for surgical cover screw and connecting screws, digital, extra-short

ZAONEBOX*ZSCREW*

HSM-20-DG

Screwdriver for surgical cover screw and connecting screws, digital, short

ZPREKOH*ZPREMIUM*ZKOHNO*ZAONEBOX*ZSCREW*

HSML-20-DG

Screwdriver for surgical cover screw and connecting screws, digital, long


HSM 20 DG

HSML 20 DG

54


Prosthetic screwdrivers


HSM-20-EX

Screwdriver for connecting screws, with hexagonal connector for dynamometric key or hand knob, short


HSML-20-EX

Screwdriver for connecting screws, with hexagonal connector for dynamometric key or hand knob, long


HSMXL-20-EX

Screwdriver for connecting screws, with hexagonal connector for dynamometric key or hand knob, extra long


HSM-20-CA

Screwdriver for connecting screws, with right angle shank


BASCC-EX

Screwdriver for ball attachments, with hexagonal connector for dynamometric key

ZSCREW*

AVV2-ABUT

Screwdriver for standard abutments and for straight P.A.D. abutments, with hexagonal connector for dynamometric key

ZSCREW*

8926-SW

Driver for screwing abutment Locator, with hexagonal connector for dynamometric key, short

ZSCREW*

8927-SW

Driver for screwing abutment Locator, with hexagonal connector for dynamometric key, long

ZSCREW*

AVV-CAP-TIT-1

Instrument for inserting, fitting and maintaining the titanium cap for CAP-TIT-1 ball attachments

ZSCREW*

HSM-20-EX

HSML 20 EX

8927 SW

55

Extensions and Fittings


BPM-15

Extension for bone taps, mounters, drivers and manual drivers, with hexagonal connector for dynamometric key


PROF-CAL2

Extension for surgical drills


B-AVV-CA3

Mechanical adapter with right angle shank for instruments with hexagonal connector


AVV3-MAN-DG

Hand knob for bone taps, hand use and right angle drivers


AVV2-CA-DG

Hand knob for hand use of drivers, bone taps and drivers with right angle shank

ZAONEBOX*

PAD-CAR

Carrier for transferring angled abutments into the oral cavity, sterilisable and reusable. Must be secured to the abutments with the screw

ZSCREW*

PROF CAL2

AVV2 CA DG

PAD CAR

* The codes ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX*, ZSCREWKIT* are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

56


PROF3

Depth gauge ZPREKOH*ZPREMIUM*ZKOHNO*


ORING180-088

Kit with 5 spare o-rings for all accessories with hexagonal connector for dynamometric key

-


Depth gauge

Spare O-ring

* The codes ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX*, ZSCREWKIT* are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

Torque-control ratchet


CRI5-KIT

Torque-control ratchet, which can be used in dynamometric or fixed mode, complete with accessories for quick torque adjustment and periodic maintenance (Allen wrench and lubricant). The ratchet has torque limits from 35 to 70 Ncm, with adjustment lines at 10-20-25-30-35-50-70 Ncm.


57

Bone profilers

The bone profilers are not contained in any kit and must be obtained as optional supplies.

implantdiameter


Bone profiler with narrow flaring

A-PAD-PS330-S A-PAD-PS380-S A-PAD-PS425-S A-PAD-PS500-S

-

Bone profiler with wide flaring

A-PAD-PS330-L A-PAD-PS380-L A-PAD-PS425-L A-PAD-PS500-L

-

58


A-L100

A-L120

A-L130

X-ray template for Premium implants (Straight and SP), real dimensions

X-ray template for Premium implants (Straight and SP), 20% increased dimensions

X-ray template for Premium implants (Straight and SP), 30% increased dimensions

ZPREKOH*ZPREMIUM*ZAONEBOX*

A-TG-L100

A-TG-L120

A-TG-L130

X-ray template for Premium TG implants, real dimensions

X-ray template for Premium TG implants, 20% increased dimensions

X-ray template for Premium TG implants, 30% increased dimensions


K-L100

K-L120

K-L130

X-ray template for Kohno implants (Straight and SP), real dimensions

X-ray template for Kohno implants (Straight and SP),20% increased dimensions

X-ray template for Kohno implants (Straight and SP),30% increased dimensions


K-TG-L100

K-TG-L120

K-TG-L130

X-ray template for Kohno TG implants, real dimensions

X-ray template for Kohno TG implants, 20% increased dimensions

X-ray template for Kohno TG implants,30% increased dimensions


* The codes ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX* are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

A-L100 rev 02/11

RIP

RO

DU

ZION

E SCA

LA R

EALE

REA

L DIM

ENSIO

NS

Impianti cilindrici con emergenza coronale diritta Straight Implants with straight emergency profile

ø 3.30 mmø 3.80 mmø 3.80 mm ø 4.25 mmø 4.25 mm ø 5.00 mmø 5.00 mm

Impianti cilindrici con emergenza coronale ampia Switching Platform SPImplants with wide emergency profile

Pre

miu

m

H 10 mm

A-DS-330-100A-ZT-330-100

H 10 mm

A-DS-380-100A-ZT-380-100

H 8.5 mm

A-DS-425-085A-ZT-425-085

H 8.5 mm

A-DS-380-085A-ZT-380-085

H 7 mm

A-DS-425-070A-ZT-425-070

H 11.5 mm

A-DS-330-115A-ZT-330-115

H 11.5 mm

A-DS-380-115A-ZT-380-115

H 10 mm

A-DS-425-100A-ZT-425-100

H 13 mm

A-DS-330-130A-ZT-330-130

H 13 mm

A-DS-380-130A-ZT-380-130

H 11.5 mm

A-DS-425-115A-ZT-425-115

H 15 mm

A-DS-330-150A-ZT-330-150

H 15 mm

A-DS-380-150A-ZT-380-150

H 18 mm

A-ZT-380-180

H 13 mm

A-DS-425-130A-ZT-425-130

H 15 mm

A-DS-425-150A-ZT-425-150

H 18 mm

A-ZT-425-180

H 13 mm

A-DS-500-130A-ZT-500-130

H 15 mm

A-DS-500-150A-ZT-500-150

H 11.5 mm

A-DS-500-115A-ZT-500-115

H 10 mm

A-DS-500-100A-ZT-500-100

H 8.5 mm

A-DS-500-085A-ZT-500-085

H 7 mm

A-DS-500-070A-ZT-500-070

H

H 10 mm

A-DS-380SP-100A-ZT-380SP-100

H 8.5 mm

A-DS-380SP-085A-ZT-380SP-085

H 11.5 mm

A-DS-380SP-115A-ZT-380SP-115

H 13 mm

A-DS-425SP-130A-ZT-425SP-130

H 15 mm

A-DS-425SP-150A-ZT-425SP-150

H 11.5 mm

A-DS-425SP-115A-ZT-425SP-115

H 10 mm

A-DS-425SP-100A-ZT-425SP-100

H 8.5 mm

A-DS-425SP-085A-ZT-425SP-085

H 7 mm

A-DS-425SP-070A-ZT-425SP-070

H 13 mm

A-DS-500SP-130A-ZT-500SP-130

H 15 mm

A-DS-500SP-150A-ZT-500SP-150

H 11.5 mm

A-DS-500SP-115A-ZT-500SP-115

H 10 mm

A-DS-500SP-100A-ZT-500SP-100

H 8.5 mm

A-DS-500SP-085A-ZT-500SP-085

H 7 mm

A-DS-500SP-070A-ZT-500SP-070

H 15 mm

A-DS-380SP-150A-ZT-380SP-150

H 13 mm

A-DS-380SP-130A-ZT-380SP-130

H

A-TG-L100 rev 05/11

RIPRODUZIO

NE SCALA REALE

REAL DIMEN

SION

S

Impi

anti

cilin

drici

a co

nfor

maz

ione t

rans

muc

osa

- Cyli

ndric

al im

plan

ts w

ith a

tran

sgin

giva

l cor

onal

par

t

Ø 5.

00 m

mØ

4.25

mm

Ø 3.

80 m

mØ

3.30

mm

H 10 mm

A-DS-330TG-100A-ZT-330TG-100

H 10 mm

A-DS-380TG-100A-ZT-380TG-100

H 8.5 mm

A-DS-380TG-085A-ZT-380TG-085

H 8.5 mm

A-DS-425TG-085A-ZT-425TG-085

H 8.5 mm

A-DS-500TG-085A-ZT-500TG-085

H 7 mm

A-DS-380TG-070A-ZT-380TG-070

H 7 mm

A-DS-425TG-070A-ZT-425TG-070

H 7 mm

A-DS-500TG-070A-ZT-500TG-070

H 6 mm

A-DS-380TG-060A-ZT-380TG-060

H 6 mm

A-DS-425TG-060A-ZT-425TG-060

H 6 mm

A-DS-500TG-060A-ZT-500TG-060

H 10 mm

A-DS-425TG-100A-ZT-425TG-100

H 10 mm

A-DS-500TG-100A-ZT-500TG-100

H 11.5 mm

A-DS-330TG-115A-ZT-330TG-115

H 11.5 mm

A-DS-380TG-115A-ZT-380TG-115

H 11.5 mm

A-DS-425TG-115A-ZT-425TG-115

H 11.5 mm

A-DS-500TG-115A-ZT-500TG-115

H 13 mm

A-DS-330TG-130A-ZT-330TG-130

H 13 mm

A-DS-380TG-130A-ZT-380TG-130

H 13 mm

A-DS-425TG-130A-ZT-425TG-130

H 13 mm

A-DS-500TG-130A-ZT-500TG-130

H 15 mm

A-DS-330TG-150A-ZT-330TG-150

H 15 mm

A-DS-380TG-150A-ZT-380TG-150

H 15 mm

A-DS-425TG-150A-ZT-425TG-150

H 15 mm

A-DS-500TG-150A-ZT-500TG-150

H

Ø max spira

H 10 mm

K-DS-380-100

H 10 mm

K-DS-380SP-100

H 10 mm

K-DS-425-100

H 10 mm

K-DS-425SP-100

H 10 mm

K-DS-500-100

H 10 mm

K-DS-500SP-100

H 11.5 mm

K-DS-380-115

H 11.5 mm

K-DS-380SP-115

H 11.5 mm

K-DS-425-115

H 11.5 mm

K-DS-425SP-115

H 11.5 mm

K-DS-500-115

H 11.5 mm

K-DS-500SP-115

H 13 mm

K-DS-380-130

H 13 mm

K-DS-380SP-130

H 13 mm

K-DS-425-130

H 13 mm

K-DS-425SP-130

H 13 mm

K-DS-500-130

H 13 mm

K-DS-500SP-130 H 15 mm

K-DS-380-150

H 18 mm

K-DS-380-180

H 15 mm

K-DS-380SP-150

H 15 mm

K-DS-425-150

H 18 mm

K-DS-425-180

H 15 mm

K-DS-425SP-150

K-L100 rev 02/11

RIP

RO

DU

ZION

E SCA

LA R

EALE

REA

L DIM

ENSIO

NS

ø 3.80 mmø 3.80 mm ø 4.25 mmø 4.25 mm ø 5.00 mmø 5.00 mm

Impianti conici con emergenza coronale dritta StraightImplants with straight emergency profile

Impianti conici con emergenza coronale ampia Switching Platform SPImplants with wide emergency profile

Ko

hn

o

HH

H 10 mm

K-DS-600-100

H 8.5 mm

K-DS-600-085

H 11.5 mm

K-DS-600-115

ø 6.00 mm

K-TG-L100 rev 05/11

RIPRODUZIO

NE SCALA REALE

REAL DIMEN

SION

S

Impi

anti

coni

ci a

conf

orm

azion

e tra

nsm

ucos

a - C

onic

al im

plan

ts w

ith a

tran

sgin

giva

l cor

onal

par

t

Ø 5.

00 m

mØ

4.25

mm

Ø 3.

80 m

m

H 10 mm

K-DS-380TG-100

H 10 mm

K-DS-425TG-100

H 10 mm

K-DS-500TG-100

H 11.5 mm

K-DS-380TG-115

H 11.5 mm

K-DS-425TG-115

H 11.5 mm

K-DS-500TG-115

H 13 mm

K-DS-380TG-130

H 13 mm

K-DS-425TG-130

H 13 mm

K-DS-500TG-130

H 15 mm

K-DS-380TG-150

H 15 mm

K-DS-425TG-150

H 15 mm

K-DS-500TG-150

H

Ø max spira


X-ray templates

59

code description

ZSHORTY*

SHORTY-KIT*

Surgical drilling kit complete with drills for Premium and Kohno implants (Straight, SP and TG)

Radel drilling kit instrument case for Shorty drills


The implant site of the specific Shorty implants with lengths of 7 mm and 8.5 mm can be prepared with the drills contained in the standard surgical kits. However, don’t forget that the drills contained in these kits, like all the standard drills, require an over-preparation connected to the measurement of the drill tip (see page 39). The drill tip has a guiding, centring and penetrating function and normally characterises the instrument’s ability to move forward, determining its efficiency. For this reason, even though it limits the choice of the preparation length, the drill tip is a normal aspect of traditional surgical protocols.On the other hand, the choice of a short implant is generally connected to the lack of available bone height in the implant site, so it would be desirable not to have to engage a working thickness with the tip of the drill, but instead to lodge a longer implant. For this reason, a drilling kit was created for preparing the Shorty implant sites of the Premium Kohno system (Straight, SP and TG) , in heights of 6, 7, and 8.5 mm with very short tip, where a portion of over-preparation is not deemed necessary (see page 39). For example, to insert an implant of 6 mm using the Shorty drills, an actual hole of 6 mm will be made, and not 6 mm plus the portion of over-preparation.The Shorty drills allow dedicating the entire bone available to lodging the implant, without any waste. Moreover, the Shorty drills have the advantage, compared to traditional drills, of being shorter than the standard drills (24.85 mm instead of 35 mm). This important feature makes it possible to use these instruments even in case of difficult to reach distal sectors or small oral openings.

Shorty Drilling kit

* The codes ZPREKOH*, ZPREMIUM*, ZKOHNO*, ZAONEBOX* are followed by a letter and a number that indicate the revision of the kit. The contents of the kits may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

60


Instruments contained in the Shorty Drilling Kit

code description diameter

FGS-200/300

Short guide drill 2.00/2.50/3.00

FGS-340/425


FGS-425/540


PPS-2/3

Parallelism pin for short implants, with depth lines at 5.00, 6.00 and 7.00 mm

2.00/3.00

Shorty pilot drill Shorty pilot drill stops

FPS-200Shorty pilot drill

STOPS-200-0505.00 mm stop for Shorty pilot drill



24.85

FGS-340/425

61

* The codes ZSHORTY* is followed by a letter and a number that indicate the revision of the kit. The contents of the kit may be updated and varied if Sweden & Martina considers it opportune to develop or improve them.

Please note: remember that the drills in the “Drilling Kit” do not over-prepare the surgical site. The working lengths include the portion related to the conical tip of the drill.


Ø 3.80 mm Ø 4.25 mm Ø 5.00 mm Ø 6.00 mm

drills

FFS-300 FFS-340 FFS-425 FFS-540

stop

STOPS-300-050 STOPS-340-050 STOPS-425-050 STOPS-540-050



7.00

7.95

8.5

6.0

7.0

5.0

10.0 11.5 13.0 15.0 18.0

Standard drill

Shorty drill

PS 300 STOPS 540 05OPS 425

24.85 24.85 24.85 24.85







with passing screw




Overdentures


General

64

The transgingival healing caps, in grade 5 titanium, can be identified by a laser marking that reports the diameter, emergence profile and height. In case of transgingival healing caps with straight emergence profile, the marking only reports the platform diameter and height.The transgingival healing caps must be tightened at a torque of 10 Ncm, using the HSM series of drivers, the full details and codes of which can be found on page 54.

Transgingival healing caps

PROSTHETIC COMPONENTS

64

Transgingival healing caps with straight emergence profile: the laser marking, on the side, allows immediate recognition of the connection diameter (38 = 3.80 mm) and of the transgingival height (3 = 3 mm).

Transgingival healing caps with anatomical emergence profile: the laser marking, on the upper surface, shows the connection diameter (50 = 5.00 mm), the maximum crown size (60 = 6.00 mm) and the transgingival height (2 = 2.00 mm).

Guiding cylinder: facilitates centring when inserting the implant.

65

connection Ø 3.30 mm Ø 3.80 mm Ø 4.25 mm Ø 5.00 mm Ø 6.00 mm

Transgingival healing capsAnatomical emergence profiletransgingival H. 2 mm

A-TMGR-330-2 A-TMGR-380-2 A-TMGR-425-2 A-TMGR-500-2 A-TMGR-600-2






-

A-TMGR-380-7 A-TMGR-425-7 A-TMGR-500-7

-

Transgingival healing capsStraight emergence profiletransgingival H. 2 mm

A-TMG-330-2 A-TMG-380-2

- - -


A-TMG-330-3 A-TMG-380-3

- - -


A-TMG-330-5

- - - -

2.00

3.00

5.00

2.00

3.00

5.00

7.00

2.00

3.00

5.00

7.00

2.00

3.00

5.00

7.00

2.00

2.00 2.00

3.00

3.003.00

5.00

5.00

ø 7.00

ø 7.00

ø 7.00

M 1.80

M 1.80

M 1.80

M 1.80 M 1.80

M 1.80

M 1.80

M 1.80

M 1.80

M 1.80

M 1.80

M 1.80

M 2.00

M 2.00

M 2.00

M 2.00

M 2.00

M 2.00

M 2.00

M 2.00

M 2.00

M 2.00

M 2.00

ø 6.00

ø 6.00

ø 6.00

ø 6.00

ø 5.20

ø 5.20

ø 5.20

ø 5.20

ø 4.60

ø 4.60

ø 4.60

ø 4.60

ø 3.80

ø 3.80

ø 3

implantology - sweden & martina...implantology contents and index sweden & martina develops and...

Documents