important safety instructionsstep 1: join arm assembly (a) to base assembly (b) by aligning both at...
TRANSCRIPT
PRODUCT NAME: Newton Task Floor Lamp ITEM NUMBER: LL346ASSEMBLED DIMENSIONS: 23”H x 20 1/4“W
PRODUCTS ARE NOT INTENDEDFOR COMMERCIAL USE. Page 1 of 3
Customer Service: 800-367-2810Online: www.ballarddesigns.com
MADE IN INDIA
IMPORTANT SAFETY INSTRUCTIONS:
WARNING:-Deviation from assembly instructions may cause risk of fire or electric shock.-To reduce risk of personal injury, always turn off lamp and permit bulbs to cool prior to replacement.-Do not touch or look directly at illuminated bulbs.-Keep flammable material away from illuminated bulbs.
-To reduce risk of electric shock, lamp features a polarized plug (one blade is wider than the other) designed to fit one way into a polarized outlet. If plug does not fully fit into outlet, reverse plug. If it still does not fit, contact a qualified electrician. Never use an extension cord that does not permit plug to fully seat. Do not alter plug.-Read instructions carefully and completely before beginning assembly or installation.-Product must be installed according to applicable code(s) by a person familiar with its construction and operation.-Lamp requires a Type A MEDIUM Base Bulb (NOT included).-Socket rated up to 40 WATTS MAXIMUM INCANDESCENT, LED or CFL bulb.
Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level surface.
NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until after assemblyand installation are complete.
Recommended Location for Use: Dry Indoor Environment
Assembly Time: 25 Minutes
PARTSCheck to make sure you have the following:
INCLUDED:
Page 2 of 3
NOT INCLUDED:
1 - 40 Watt MaxType B Bulb
Unplug lamp prior to installation or removal.
Arm Assembly (A)
Base Assembly (B)
Componets A and B joined by cord. Shade permanently attached to Arm.
Lamp Body
Page 3 of 3Customer Service: 800-367-2810Online: www.ballarddesigns.com
Unplug lamp prior to installation or removal.
STEP 2: INSTALL BULBSocket rated up to a 40 WATT MAXIMUM Type A MEDIUM BASE Incandescent, LED or CFL Bulb (NOT included). To mimic color of an incandescent choose 2700K (Soft White)
Lower Energy ConsumptionCONSIDER USING LED BULBS
Minimal Heat / Longer Life / High Illumination
TIP
Cleaning and CarePeriodically wipe fixture with a soft, dry cloth.
Avoid use of harsh or abrasive chemicals as finish damage may result.
(A)
(B)
STEP 1: Join Arm Assembly (A) to Base Assembly (B) by aligning both at pivot joint then hand-tightening until secure. Arm Assembly and Shade may be adjusted by loosening and tightening pivot joint.
LightOutput
LED Incandescent(Lumens)
450 4-5 40
6-8 60
9-13 7516-20 100
25-28 150
800
1,1001,600
2,600
Energy Consumption(Watts)
Pivot Joint
DO NOT use tools to tighten pivot joints. Damage may result.