in carton - fashion bed group · all welds per ansi/aws a2.4-79 american national standard all...
TRANSCRIPT
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290P ROLLAWAY W/IS MATT IN CARTON
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
67 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: 9 GA. SINUOUS WIRE
UPC CODE: 094325168859
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290P ROLLAWAYWITH INNERSPRG MATTIN CARTON
* REV E ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFFAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410090
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
N/AN/A
29"
75"
20 3/4"WITH MATT
16 3/4"
10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410090
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
F JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV E ON EDR 10904 *
IN CARTONWITH INNERSPRG MATT1290P ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
N/AN/A
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290P ROLLAWAY CARTONED
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
52 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: 9 GA. SINUOUS WIRE
UPC CODE: 094325168996
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290P ROLLAWAYCARTONED
* REV F ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFGAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410176
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
N/AN/A
29"
75"
16 3/4"
10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410176
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
G JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV F ON EDR 10904 *
CARTONED1290P ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
N/AN/A
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290P ROLLAWAY W/270 AB MATT IN CARTON
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
63 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: 9 GA. SINUOUS WIRE
UPC CODE: 094325169061
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290P ROLLAWAYWITH 270 MATT IN CTNANTI-BACTERIAL
* REV E ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFFAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410200
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
N/AN/A
29"
75"
16 3/4" 20 3/4"WITH MATT
10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410200
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
F JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV E ON EDR 10904 *
ANTI-BACTERIALWITH 270 MATT IN CTN1290P ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
N/AN/A
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290P ROLLAWAY W/FOAM MATT IN CARTON
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
59 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: 9 GA. SINUOUS WIRE
UPC CODE: 094325169078
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290P ROLLAWAYWITH FOAM MATTRESSIN CARTON
* REV E ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFFAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410201
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
N/AN/A
29"
75"
16 3/4" 20 3/4"WITH MATT
10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410201
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
F JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV E ON EDR 10904 *
IN CARTONWITH FOAM MATTRESS1290P ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
N/AN/A
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290 ROLLAWAY IN CARTON
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
52 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: (4) 11 GA. COIL SPRINGS
UPC CODE: 094325204762
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290 ROLLAWAYIN CARTON
* REV C ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFDAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410255
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
10-20-11JNM
29"
75"
16 3/4"
10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410255
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
D JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV C ON EDR 10904 *
IN CARTON1290 ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
10-20-11JNM
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290 ROLLAWAY W/FOAM MATT IN CARTON
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
59 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: (4) 11 GA. COIL SPRINGS
UPC CODE: 094325204793
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290 ROLLAWAYWITH FOAM MATTRESS IN CARTON
* REV C ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFDAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410258
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
10-25-11JNM
29"
75"
16 3/4"20 3/4"
WITH MATT10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410258
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
D JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV C ON EDR 10904 *
IN CARTONWITH FOAM MATTRESS1290 ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
10-25-11JNM
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290 ROLLAWAY W/IS MATT IN CARTON
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
67 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: (4) 11 GA. COIL SPRINGS
UPC CODE: 094325204823
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290 ROLLAWAYWITH INNERSPRG MATTIN CARTON
* REV C ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFDAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410261
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
10-25-11JNM
29"
75"
16 3/4"20 3/4"
WITH MATT10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410261
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
D JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV C ON EDR 10904 *
IN CARTONWITH INNERSPRG MATT1290 ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
10-25-11JNM
PRODUCT:
GENERAL
APPLICATION:
FINISH:
MOBILITIES (LEG ATTACHMENTS):
PACKAGED WEIGHT:
CONSTRUCTION
SIDE RAIL:
CROSS ARMS:
TYPE:
HEADBOARD/FOOTBOARD BRACKETS:
REMARKS:
1290 ROLLAWAY W/AB MATT IN CARTON
2/6
BLACK
(2) 5" SWIVEL CASTERS, (2) 8" WHEELS
N/A
1" X 1" X 12 GA.
N/A
N/A
63 LBS
CENTER SUPPORT: N/A
CROSS SUPPORT: (4) 11 GA. COIL SPRINGS
UPC CODE: 094325204854
SCALE:1:12
SIZEA
DO NOT SCALE DRAWING SHEET 1 OF 4
1290 ROLLAWAYWITH ANTI-BAC MATTIN CARTON
* REV C ON EDR 10904 *
1) WAS 23000011 (SHT 2)
7-25-1610979SDSJNFDAUTHOR CHKD EDR# DATEREV. LEVEL
DESCRIPTIONOF CHANGE
410264
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
ANGULAR:
1
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
DWG. NO.
TOLERANCE UNLESS OTHERWISE NOTED:
PROPRIETARY AND CONFIDENTIAL
FRACTIONAL:
1/32
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
DATEDRAWN BY
10-25-11JNM
29"
75"
16 3/4"20 3/4"
WITH MATT10"
14"
16 1/4"
30"
32 3/4"
47 5/8"
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
LEGGETT & PLATT, INC. ANYREPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF
LEGGETT & PLATT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
THIS PRINT SUPERSEDESALL PREVIOUS PRINTS
DESTROY ALL PRINTS ISSUEDPRIOR TO THIS REVISION
DIMENSIONS ARE INCHESUNLESS OTHERWISE NOTED:
FRACTIONAL:
1/32
TOLERANCE UNLESS OTHERWISE NOTED:
DWG. NO.
DECIMAL:
.XXX = .015 .XX = .03 .X = .06
ANGULAR:
1 410264
DESCRIPTIONOF CHANGE
REV. LEVEL DATEEDR#CHKDAUTHOR
D JNF SDS 10979 7-25-16
1) WAS 23000011 (SHT 2)
* REV C ON EDR 10904 *
IN CARTONWITH ANTI-BAC MATT1290 ROLLAWAY
SHEET 4 OF 4DO NOT SCALE DRAWING
BSIZE
SCALE:1:12
ALL WELDS PER ANSI/AWS A2.4-79AMERICAN NATIONAL STANDARD
ALL FASTENERS PERANSI B18 AND SAE J429 STANDARDS
DATEDRAWN BY
10-25-11JNM