index [docs.rs-online.com] · 12.sa 14a.c 12.n 4 3/4'' 120mm strong, fine tips 4...

Index

Company Profile......................................................................3

TWEEZERS

High Precision Tweezers......................................................5

High Precision Mini Tweezers ............................................10

High Precision Reverse Action Tweezers ..........................11

Ergonomic ESD Cushion Grip Tweezers............................12

Super Slim Tweezers ........................................................13

Flat Tip Tweezers ..............................................................14

General Purpose Tweezers................................................15

Boley Tweezers ................................................................16

SMD Tweezers ................................................................17

Wafer Tweezers ................................................................19

Component Positioning Tweezers ....................................25

Strong Tweezers ..............................................................26

Ceramic Replaceable Tip Tweezers ..................................27

Plastic Tip Tweezers..........................................................28

Plastic Replaceable Tip Tweezers......................................29

Soft Tip Tweezers..............................................................31

Plastic Tweezers................................................................32

Materials Technical Data ..............................................33-36

MORE TECHNOLOGY AT YOUR FINGERTIPS

Professional Scalpels and Blades......................................38

Pliers and Cutters..............................................................39

Microshears and Micropliers..............................................40

Microspatulas....................................................................40

Magic Wand......................................................................41

Vacuum Tools....................................................................41

Rework and Repair ....................................................42-44

Lead-Free Rework and Repair ..........................................45

Soldering Irons and Soldering Tools ............................46-47

Circuit Board Holders ........................................................48

Visual Inspection ..............................................................49

Swabs ..............................................................................50

Solvent Dispenser ............................................................51

Keep-Clean -Step ............................................................51

SMD Components Tester ............................................52-53

Product Index ..................................................................54-57

How to find US ......................................................................58

IDEAL-TEK, founded in1965, is a Swiss companymanufacturing top qualityhand-tools.

Ideal-tek's successfulrecord is due to a numberof factors: popular andhigh quality products, awidespread and highlyeffective distribution net-work and a collaborative,synergetic and mutuallybeneficial relationship with distributors and customers.

High productivity at all levels is achieved by giving human resourcesthe best possible supportin terms of technology andmanufacturing equipment.

Our investments focus on

research and developmentof new solutions and applications in order tomeet our customer'sincreasing requirements.Apart from a perfect tipalignment, surface finish isextremely important: thepaddles or tips must havesmooth edges and behighly polished and totallyfree of scratches or contaminations, whichcould damage the compo-nents and processes.

Certified ISO 9001:2000since 1994.

Human approach and long-term personal contact havealways been the subject ofspecial attention in thecompany's relations withcustomers and suppliers.

Ideal-Tek, Electronic Catalogue - 3

Company Profile

000.SA000.S

0.SA0.S0.TA

4 3/4'' 120mmflat edges, fine tips

4 3/4'' 120mmstrong, flat edges, thick

00.SA00.S00.TA

0A.SA

0C9.SA0C9.S0C9.TA

1.SA1.S1.NC1.TA

00B.SA

00D.SA00D.S00D.TA

2.SA2.S2.NC2.TA2.BR

4 3/4'' 120mmstrong, flat radiused edges, fine

4 3/4'' 120mmsame as 0, radiused edges, fine

4 3/4'' 120mmsame 00 with serrated grips

3 1/2'' 90mmshort, flat edges, fine

4 3/4'' 120mmsame as 00, serrated tips and grips

4 3/4'' 120mmstrong, straight, fine

4 3/4'' 120mmflat, sharp fine tips

Handcrafted to perfect tip symmetry and balance, polished edges, superior no-scratch/antiglare satin finish.The right tweezers and material for a successful application.All High Precision Tweezers are available in different materials (SA, S, NC, N, TA, BR,) and also availabe with specialcoatings (DC, EP, NE, TE). Please refer to technical datasheet on page 33-36 for more information. Chemical data-charts are available on www.ideal-tek.com

High Precision Tweezers

4 1/4'' 110mmshort, flat edges, fine

0C11.SA0C11.S

High Precision Tweezers - 5

2A.SA2A.S2A.NC2A.TA

4 3/4'' 120mmflat accurate round tips

3CB.SA3CB.S

3.SA3.S3.NC3.TA

4 3/4'' 120mmvery sharp, fine

4 1/4'' 110mm as 3, short

3C.SA3C.S3C.NC3C.TA

3F.SA3F.S

4A.SA4A.S

5A.SA5A.S5A.NC5A.TA

4.SA4.S4.NC4.TA

5.SA5.S5.NC5.TA

4 1/4'' 110mmas 3C, bent tips

4 3/4'' 120mm3mm flat touch, for holding tiny wires

4 1/4'' 110mmextra fine tips

4 1/4'' 110mmas 4, stronger

4 1/4'' 110mmextra fine tips, superior finish


2AB.SA2AB.S2AB.TA

4 3/4'' 120mmas 2A, curved

4 3/4'' 120mmas 2A, double bent tips

2AZ.SA

4 1/4'' 110mmas 3C, crush proof, smooth

3CI.SA3CI.TA

6 - High Precision Tweezers

7B.SA7B.S7B.TA

7.SA7.S7.NC7.TA

4 1/2'' 115mmvery fine, curved

4 1/2'' 115mmas 7, strong

7A.SA7A.S7A.NC

7E.SA7E.S

8.SA8.S8.TA

11.SA11.N

K5HP.SAK5HP.SK5HP.NCK5HP.TA

10G.SA

4 1/2'' 115mmas 7, serrated tips

4 1/2'' 115mmas 7, flat edges

high precision tweezers set 00, 2A, 3C, 5, 7top quality hard/foam wallet

length 4 3/4'' 120mm, width 0.4'' 10mmstrong flat for straightening wires

4 1/4'' 110mmfine, serrated tips and grips

4 3/4'' 120mmstraight, fine tips

5TTH.SA5TTH.S

4 1/4'' 110mmanti capillary, extra fine, with lock-ringfor handling electronic microscope grids

4 1/2'' 115mmflat angled, fine

6.SA6.S6.NC6.TA

5C.SA5C.S5C.NC5C.TA

5B.SA5B.S

4 1/4'' 110mmas 5, bent tips for max visibility

4 1/2'' 115mmas A, extra fine, double bent tips


14A.C12.SA12.N

4 3/4'' 120mmstrong, fine tips

4 3/4'' 120mmcutting tweezers fine, 90° angled blades

15A.C

4 3/4'' 120mmsame as 14A, rounded tips

14AN.C

15AFW.C

15AGW.C

15AP.C15ANW.C

15ASW.C

4 3/4'' 120mmcutting tweezers for soft copper, gold, silver, magnetic wires



4 3/4'' 120mmrounded edges cutting tweezers for soft copper, gold, silver, magnetic wires

4 3/4'' 120mmparallel cutting tweezers for soft copper, gold, silver, magnetic wires

4 3/4'' 120mmrounded edges cutting tweezers for soft copper, gold, silver, magnetic wires

14AGW.C

4 3/4'' 120mmcutting tweezers for max visibility fine, 90° angled blades

8 - High Precision Tweezers

15AGWHM.SA

Antimagnetic stainless steel handle, hard metal blades (75HRC), for very precise cutting of hairsprings, extended lifetime, high cutting capacity

152.S

3 3/4'' 98mmprecision miniature cutting tweezers

A.SAA.S

6 1/8'' 155mmFine, bent tips epoxy coated handles

775.SA

AC.SAAC.S

S.SAS.S

AM.BR F.SAF.SF.NC

4 3/4'' 120mmstrong, precision tips

4 1/4'' 110mmstrong tips, serrated grips

4 3/4'' 125mmprecision brass tweezers anti-sparking

4 3/4'' 120mmas 2A, flat and squared tips

4 3/4'' 120mmvery fine tips

4 3/4'' 120mmas 2A, crush proof, smooth action

52A.SA52A.S52A.TA

27.SA27.S

5 1/3'' 135mmstrong, sharp, fine tips

51S.SA51S.S51S.TA

4 1/2'' 115mmas 5A, bent tips for max visibility

Cutting tweezers are now also available with our ergonomiclever for an enhanced operator comfort and increased pro-ductivity. Please add the indication “ErgoLever” to the prod-uct code For ex. 15AGW.C ErgoLever


475Y32.SA 5'' 130mmminiature stripping tweezers, dia. 0.2 mm (AWG 32), serrated grips

Suitable for stripping fine wires whit PVC or Teflon insulationNon-reflecting surfaceOther dia. available on request: [email protected]

M-4.SAM-4.S

3'' 80mmvery fine tips

M-3.SAM-3.S

M-00D.SAM-00D.S

3 1/2'' 90mmserrated tips and grips

2 3/4'' 70mmrounded flat tips

M-2A.SAM-2A.S

M-AC.SAM-AC.S

M-5.SAM-5.S

M-HD.SAM-HD.S

2 3/4'' 70mmsharp, fine tips

3'' 80mmextra fine tips

3 1/2'' 90mmstrong tips, serrated grips

3 1/2'' 90mmdove tailed, serrated tips and grips

Fine tips without the excess bulk of long tweezers

High Precision Mini Tweezers

10 - High Precision Mini Tweezers

H.SAH.S

3 1/2'' 90mmdove tailed fine tips

M-2.SAM-2.S

3'' 80mmFlat sharp fine tips

4X.SA

2AX.SA

4 3/4'' 120mmflat accurate round tips

4 3/4'' 120mmvery sharp, fine

3X.SA

5AX.SA

5X.SA 5TTHX.SA

7X.SA



4 1/4'' 110mmanti capillary, extra fine, with lock-ring for handling electronic microscope grids


4 1/2'' 115mmvery fine, curved

Specially intended for applications where a high precise self-closing action is required (e.g. microscopy). Extra fine tips in anti-acid/anti-magnetic stainless steel (SA).

High Precision Reverse Action Tweezers

High Precision Reverse Action Tweezers - 11

3.SA.DR

00.SA.DR

5'' 125mmflat edges, thick

5'' 125mmstrong, sharp, rounded tips

2A.SA.DR

3C.SA.DR

7.SA.DR

AA.SA.DR

5.SA.DR

15AGW.DR

5'' 125mmvery sharp and superior finish

4 1/2'' 115mmvery sharp and superior finish


4 3/4'' 120mmfine curved tips

43/4'' 120mmfor cutting hairsprings

5” 130mmprecision tips

Anti-magnetic precision tweezers with soft ESD ergonomic cushion grips (resistivity 10E8) for an enhanced operatorcomfort. For more information on our ESD Ergonomic Handle (DR) see page 35.

Ergonomic ESD Cushion Grip Tweezers

12 - Ergonomic ESD Cushion Grip Tweezers

65A.SA65A.S65A.NC65A.TA

60.SA

5 1/2'' 140mmprecision relieved tips

5 1/2'' 140mmbent, rounded tips

64A.SA

SS.SASS.SSS.NCSS.TA

SSF.SASSF.NC

SS6.SASS6.TA

SSL.SA

5 1/2'' 140mmvery fine bent tips


6'' 150mmextra fine tips

5 1/2'' 140mmextra fine, 2mm tips touch

6'' 150mmas SS6, for max visibility

Long and slender tweezers for multiple precision applications especially suitable for working near heat sources.

Super Slim Tweezers

Super Slim Tweezers - 13

35A.SA

33A.SA

4 1/2'' 115 mmflat round tips

4 3/4'' 120 mmsmooth to hold delicate parts

34A.SA

125.SA

126.SA

128.SA

125A.SA

127.SA

4 3/4 120mmsame use as 34A

4 3/4'' 120 mmsmooth tips, no scratch

4 3/4'' 120 mmSame as 125 but elongated tips

4 1/4'' 110 mmround, flat tips

4'' 105mmthin, square tips

4'' 105mmsame as 127, bent tips

Smooth scratch proof tips usefull tips for handling electronic sensitive parts.

Flat Tip Tweezers

14 - Flat Tip Tweezers

120A.SA

119.SA

6'' 150mmfine tips, serrated tips and grips

6'' 150mmas 119, strong, serrated tips and grips

119A.SA

121.SA

122.SA

124.SA

321.SA

121M.SA

123.SA

231.SA

4 1/4'' 110mmfine, strong serrated tips and grips

6 1/4'' 160mmvery strong, blunt serrated tips and grips

6 1/4'' 160mmas 120, thin serrated tips and serrated grips

6'' 150mmfine, bent serrated tips and grips

6'' 150mmFine, double bent serrated tips and grips

6'' 150mmas 122, strong serrated tips and serrated grips

4 3/4'' 120mmfine, serrated tips

4 3/4'' 120mmflat rounded tips teflon coated

Handcrafted to perfect tip symmetry and balance, polished edges, superior no-scratch/antiglare satin finishThe right tweezers and material for a successful application.

General Purpose Tweezers - 15

General Purpose Tweezers

649.SA649.S

647.SA647.S

4 3/4'' 120mmstrong blunt precision tips serrated tips and grips

6'' 150mmstrong, fine, alignment pin serrated tips and grips

6'' 150mmstrong, fine, bent, alignment pin serrated tips and grips

5 3/4'' 145mm; 0.14'' 3.6mmnickel plated tweezers to hold pearls and ball bearings

648.SA648.S

PB.NP

GG.SAGG.NP

NN.SANN.NP

AA.SAAA.SAA.NPAA.TA

MM.SAMM.NP

5'' 130mmgeneral purpose straight fine tips

5'' 130mm very slim tips, max visibility

5'' 130mmgeneral purpose strong fine tips

4 1/2'' 115mmas MM, short

456.SA

5'' 130mmfine serrated tips

5 1/2'' 140mmstrong blunt precision serrated tips and serrated grips

475.SA

Ergonomic, general purpose tweezers available in different materials for specific applications.

16 - Boley Tweezers

Boley Tweezers

SM100.SA SM101.SA

SM103.SA

SM105.SA

SM107.SA

SM102.SA

SM104.SA

SM106.SA

4 1/2'' 115mmreverse action for handling PCBs with SMDs

4 1/2'' 115mmreverse action. for soldering and de-soldering 8,14 or 16 Lead SMDs

4 1/2'' 115mmreverse action. for soldering and de-soldering 20,28,44 and68 LCCC and PLCC pad devices

4 1/2'' 115mmfor handling and positioning 2 and 3 lead SOT packages at 45° angle

4 3/4'' 120mmfor handling and positioning 3 lead SOT packages, monolithic chip capacitors, etc.

4 3/4'' 120mmspecial design for positioning all SOT packages vertically

4 3/4'' 120mmfor positioning all SOT packages horizontally. With flat base tips (4 mm long)

4 3/4'' 120mmfor positioning all flat devices at 60° angle.

RR.SARR.NP

5 3/4'' 145mmheavy duty tweezers strong tips, rounded edges

Smooth handling and positioning of all SMD components. Different tips and angles for specific jobs. Satin antiglare fin-ish and ergonomic design. Modifications or special models available on request. Available as reverse action model.

D.NP

3 3/4'' 95mmcutting nickel plated tweezers rounded edges

SMD Tweezers - 17

SMD Tweezers

SM112.SA

SM110.SA

4 3/4'' 120mmfor positioning monolithic chips capacitors, grooved tips

4 3/4'' 120mmfor positioning 5 mm monolithic chip capacitors with flat base grooved tips ( 2 mm long)

SM111.SA

SM113.SA

SM115.SA

SM117.SA

SM114.SA

SM116.SA

K5SMD.SA

4 3/4'' 120mmfor positioning 5 mm monolithic chip capacitors at 60°.Grooved tips

4 3/4'' 120mm3mm long tips bent at 60° angle one forked blade lead entry

4 3/4'' 120mmsame as SM113 but with straight tips for vertical holding

4 3/4'' 120mmgrooved tips at 30° angle for holding and positioning cylindrical devices ( up to 1 mm diam.)

4 3/4'' 120mmgrooved straight tips. for vertical positioning of cylindrical devices (up to 1 mm diam. or more)

4 3/4'' 120mmfor positioning SOT packages at 30° angle

SMD precision tweezers setSM103, SM107, SM108, SM111, SM115 top quality hard/foam wallet

SM108.SA

4 3/4'' 120mmfor positioning and soldering 1mm wide components. tips are grooved inside

4 /4'' 120mmsame as SM 108 but with 45° tips without anti-crush feature

SM109.SA

18 - SMD Tweezers

2W.SA

A 0.25'' 6.5mm - B 0.2'' 5.0mmC 0.10'' 2.5mm - D 0.15'' 4.0mm

A 0.25'' 6.5mm - B 0.25'' 9.0mm - C 0.10'' 2.5mm - D 0.15'' 4.0mm - E 0.10'' 2.5mm

2WF.SA

2WFG.SA

2WL.SA

3WF.SA

3WL.SA

2WF.SA

3W.SA

3WFG.SA

A 0.25'' 6.6mm - B 0.41'' 10.5mm - C 0.08'' 2.0mm - D 0.14'' 3.5mm - E 0.18'' 4.5mm. Replaceable tips set code: A2WFCP

A 0.25'' 6.5mm - B 0.35'' 9.0mm - C 0.10'' 2.5mmD 0.15'' 4.0mm - E 0.10'' 2.5mm

A 0.25'' 6.5mm - B 0.25'' 9.0mm - C 0.10'' 2.5mm D 0.15'' 4.0mm - E 0.10'' 2.5mm


A 0.37'' 9.5mm - B 0.39'' 10.0mmC 0.10'' 2.5mm - D 0.15'' 4.0mm



A 0.37'' 9.5mm - B 0.39'' 10.0mm - C 0.10" 2.5mm D 0.15'' 4.0mm - E 0.10'' 2.5mm

Especially designed for use with delicate (very fragile) wafer, glass wafer,.... Very firm yet anti-crush/anti-crack grip. Very smooth surface to satin finish (non glare). Teflon coating, plastic tips as well as special design to user's specifications are available.

Wafer Tweezers

2WFCPR.SA

Wafer Tweezers - 19

4WL.SA

A 0.47'' 12mm - B 0.41'' 10.5mm - C 0.08'' 2.0mm D 0.14'' 3.5mm - E 0.18'' 4.5mm Replaceable tips set code: A4WFCP


4WFG.SA

5WF.SA

6WF.SA

8WF.SA

35AP.SA

5WL.SA

6WL.SA

8WNY.SA8WT.SA







A 1.55'' 65mm - B 0.75'' 19mm - C 0.05'' 1.3mmD 0.08'' 2mm - Nylon (NY) pads or teflon (T) pads

A 0.27'' 7.0mm - B 0.15'' 4.0mm - E 0.15'' 4.0mm

4W.SA

A 0.47'' 12.0mm - B 0.33'' 8.5mmC 0.10'' 2.5mm - D 0.15'' 4.0mm


4WF.SA

20 - Wafer Tweezers

4WFCPR.SA

38FG.SA

36AP.SA

A 0.24'' 6.0mm - B 0.27'' 7.0mm - E 0.08'' 2.0mm A 0.30'' 7,8mm - B 0.24'' 6.0mm - E 0.24'' 6.0mm

37S.SA

39FG.SA

39S3.SA

42W.SA

42WFG.SA

39S2.SA

41W.SA

42WF.SA

A 0.37'' 9.5mm - B 0.43'' 11.0mmD 0.15'' 4.0mm - E 0.10'' 2.5mm

A 0.47'' 12.0mm - B 0.39'' 10.5mm D 0.15'' 4.0mm - E 0.10'' 2.5mm

A 0.25'' 6.5mm - B 0.33'' 8.5mmD 0.20'' 5.5mm - E 0.09'' 2.4mm

A 0.37'' 9.5mm - B 0.23'' 8.5mmD 0.20'' 5.5mm - E 0.09'' 2.4mm

A 1.1'' 28.0mm - B 0.47'' 12.0mmD 0.20'' 5.0mm - E 0.20'' 5.0mm

A 0.25'' 6.5mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.25'' 6.5mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.25'' 6.5mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

35B.SA

A 0.47'' 12mm - B 0.51'' 13mm - D 0.10'' 2.5mm A 0.14'' 29.0mm - B 0.20'' 5.5mm - D 0.12'' 3.0mm

35S.SA

Wafer Tweezers - 21

44WF.SA

43WFG.SA

A 0.37'' 9.5mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.47'' 12.0mm - B 0.35'' 9.0mmD 0.12'' 3.0mm - E 0.10'' 2.5mm

44W.SA

44WFG.SA

45WF.SA

46WF.SA

48WF.SA

45W.SA

46W.SA

46WFG.SA

A 0.47'' 12.0mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.47'' 12.0mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.63'' 16.0mm - B 0.30'' 7.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.63'' 16.0mm - B 0.30'' 7.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.79'' 20.0mm - B 0.27'' 7.0mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.79'' 20.0mm - B 0.27'' 7.0mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.79'' 20.0mm - B 0.27'' 7.0mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 1.1'' 28.0mm - B 0.35'' 9.0mmD 0.15'' 4.0mm - E 0.10'' 2.5mm

43W.SA

A 0.37'' 9.5mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.37'' 9.5mm - B 0.33'' 8.5mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

43WF.SA

22 - Wafer Tweezers

85C.SA

58WFL.SA

A 1.12'' 28.5mm - B 0.61'' 15.5mmC 0.09'' 2.2mm - D 0.14'' 3.5mm - E 0.10''2.5mm

A 0.25'' 6.5mm - B 0.25'' 6.0mmC 0.12'' 3.0mm - D 0.15'' 4.0mm - E 0.08'' 2.0mm

85B.SA

96.SA

444W.SA

637L.SA

637SB.SA

391.SA

600M.SA

637S.SA


A 0.57'' 14.5mm - B 0.41'' 10.5mm - C 0.35'' 9.0mm


A 0.47'' 12.0mm - B 0.35'' 9.0mm - D 0.15'' 4.0mm

A 0.79'' 20mm - B 0.43'' 11mm - E 0.09'' 2.3mm A 0.23'' 6.0mm - B 0.15'' 4.0mm - E 0.15'' 4.0mm

A 0.20'' 5.0mm - B 0.05'' 1.3mm - E 0.05'' 1.3mm A 0.20'' 5.0mm - B 0.05'' 1.3mm - E 0.05'' 1.3mm

55WFL.SA

A 0.63'' 16.0mm - B 0.39'' 10.0mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

A 0.79'' 20.0mm - B 0.30'' 8.0mmD 0.14'' 3.5mm - E 0.10'' 2.5mm

56WFL.SA

Wafer Tweezers - 23

SP5T.SA

667.SA

A 0.62'' 16mm - B 0.25'' 6.3mm - E 0.25'' 6.3mm A 0.47'' 12.0mm - B 0.33'' 8.5mm - D.0.25'' 6.5mm teflon upper pad

SP4T.SA

SP6T.SA

A 0.6'' 16.0mm - B 0.30'' 7.5mm - D.0.25'' 6.5mm teflon upper pad

A 0.68'' 20.0mm - B 0.30'' 7.5mm - D.0.25'' 6.5mm teflon upper pad

640B.SA

A 0.2'' 5.0mm - B 0.04'' 1mm - E 0.04'' 1mm A 0.36'' 9.3mm - B 0.20'' 5.5mm

666A.SA

The right tweezers for your wafers

Wafer Size [inch] Tip width [mm] Model

2” 5 - 9,5 2W, 2WF, 2WFG, 2WFCPR, 2WL, 35AP, 36AP, 37S, 38FG, 391,

39S2, 39S3, 3W, 3WF,3WFG, 3WL, 42W, 42WF, 42WFG, 43W, 43WF,

43WFG, 637L, 640B, 637S, 637SB, 666A, 85B, 85C

3” 12 - 14,5 35B, 39FG, 444W, 44W, 44WF, 44WFG, 4W, 4WF, 4WFG,

4WL, 4WFCPR,SP4T, 96

4” - 5” 16 45W, 45WF, 55WFL, 5WF, 5WL, 667, SP5T

6” 20 - 29 35S, 41W, 46W, 46WF, 46WFG, 48WF, 56WFL, 58WFL,

600M, 6WF, 6WL, 8WF, SP6T

8” 65 8WNY, 8WT

24 - Wafer Tweezers

56A.SA

55A.SA

4 3/4'' 120mmfor cylindrical components (Ø 1.2-3mm) like TO-18

4 3/4'' 120mmreverse action for cylindrical components (Ø 1.2-3mm) like TO-18

55AX.SA

56AX.SA

59A.SA

571.SA577.SA581.SA

573.SA579.SA583.SA

58A.SA

61A.SA

572.SA578.SA582.SA

4 3/4'' 120mmfor cylindrical components (Ø 3mm) like TO-18




4 1/4'' 110mmfor handling small disks max diameter 6mm, max thickness 0.5mm

571 - 5 3/4'' 145mm (Ø 2.5-5mm)577 - 5'' 125mm (Ø 2mm)581 - 4 3/4'' 120mm (Ø 1mm)



Designed specifically to hold delicate components firmly and safely.

Components Positioning Tweezers

Components Positioning Tweezers - 25

7314.SA7314.NP

30.SA

6 1/2'' 165mmDesoldering tweezers Strong blunt, bent serrated tips

6'' 155mmreverse action desoldering tweezers straight tips, to remove 14-16 pin DIP/IC

5 1/2'' 140mmVery strong blunt serrated tips and grips

5 1/2'' 140mmVery strong blunt bent tips serrated tips and grips

30D.SA

7314B.SA7314B.NP

29.SA

6 1/2'' 165mmDesoldering tweezers Strong blunt serrated tips

6'' 155mmreverse action desoldering tweezers bent tips, to remove 14-16 pin DIP/IC

29D.SA

Comfortable and precision handling of electronic components for soldering operations. Available in straight or bent(Suffix B) version and various lengths. For very firm hold available in stainless steel (SA) or nickel plated (NP).

Strong Tweezers

Part number Dimensions

7312, 7312B 4 3/4'' 120mm

7313, 7313B 5'' 130mm

7314, 7314B 5 1/2'' 140mm

7316, 7316B 6 1/4'' 160mm

7318, 7318B 7 1/4'' 180mm

7320, 7320B 7 3/4'' 200mm

7325, 7325B 9 3/4'' 250mm

7330, 7330B 12'' 300mm

26 - Strong Tweezers

72MZ.SA

A 1.2'' 30mm - B 0.007'' 0.2mm - C 0.016'' 0.4mmreplaceable tips set code: A72MZ

74MZ.SA73MZ.SA



71MZ.SA


7MZ.SA 2AMZ.SA


A 1.7'' 43.5mm - B 0.02'' 0.6mm - C 0.02'' 0.6mmreplaceable tips set code: A7MZ

Zirconia ceramic precision tips (MZ). Surface resistivity 10E12 Ohm. Contamination free, high temperature (1500°C)wear and solder resistant. Stainless steel (SA) handles. PATENT PENDING NO. 1750/97, Alignable replaceable tips.

Ceramic Replaceable Tip Tweezers

Ceramic Replaceable Tip Tweezers - 27

2ACF.SA2ALC.SA2ASV.SA

00CF.SA00LC.SA00SV.SA

A 5'' 130mm - B 0.04'' 1.0mm - C 0.08'' 2.0mm A 5'' 130mm - B 0.07'' 1.8mm - C 0.04'' 1.0mm

2ABCF.SA2ABLC.SA2ABSV.SA

2CF.SA2LC.SA2SV.SA

3CF.SA3LC.SA3SV.SA

5XCF.SA5XLC.SA5XSV.SA

248CF.SA

3CCF.SA3CLC.SA3CSV.SA

5CF.SA5LC.SA5SV.SA

7CF.SA7LC.SA7SV.SA


A 4 1/4'' 110mm - B 0.03'' 0.8mm - C 0.05'' 1.3mm A 5'' 130mm - B 0.03'' 0.8mm - C 0.05'' 1.3mm


A 5'' 130mm - B 0.025'' 0.6mm - C 0.025'' 0.6mm A 5'' 130mm - B 0.4'' 10mm - C 0.07'' 1.8mm

The largest and the most precise plastic tweezers range all over the world. 20 years of experience in high engineeringplastic materials. Choose the right tweezers with the right material for your success in your application. Technical dataare available on pages 33-36 or on www.ideal-tek.com for more information and chemical data-charts.For A, B, C dimensions refer to scheme on page 29.

Plastic Tip Tweezers

28 - Plastic Tip Tweezers



A 5'' 130mm - B 0.09'' 2.2mm - C 0.09'' 2.2mm A 5'' 130mm - B 0.4'' 10mm - C 0.07'' 1.8mm

250CF.SA

The largest and the most precise plastic tweezers range all over the world. 20 years of experience in high engineeringplastic materials. Choose the right tweezers with the right material for your success in your application. Technical dataare available on pages 33-36 or on www.ideal-tek.com for more information and chemical data charts. Replaceable kits come with 2 tips and 3 screws. The easiest and most precise replacement system available into thetweezers market.

Plastic Replaceable Tip Tweezers

2ACFR.SA2ACPR.SA2ALCR.SA2ASVR.SA


2ABCFR.SA2ABCPR.SA2ABLCR.SA2ABSVR.SA

A 5'' 130mm - B 0.04'' 1.0mm - C 0.08'' 2.0mm

00CFR.SA00CPR.SA00LCR.SA00SVR.SA

Plastic Replaceable Tip Tweezers - 29




5XCFR.SA5XCPR.SA5XLCR.SA5XSVR.SA


4WFCPR.SA

A 0.47'' 12mm - B 0.41'' 10.5mm - C 0.08'' 2.0mmD 0.14'' 3.5mm - E 0.18'' 4.5mm


A 5'' 130mm - B 0.02'' 0.5mm - C 0.025''0.6mm


A 5'' 130mm - B 0.09'' 2.2mm - C 0.09'' 2.2mm


A 5'' 130mm - B 0.055'' 1.4mm - C 0.045'' 1.2mm

242BCFR.SA242BCPR.SA242BLCR.SA242BSVR.SA

xxx

KCFRKCPRKSVR

replaceable tip tweezers set with tweezers 249, and replaceable tips set A2A, A259, A5, A7top quality hard/foam wallet with 6 screws

2WFCPR.SA2AXCFR.SA2AXCPR.SA2AXLCR.SA2AXSVR.SA

A 5'' 130mm - B 0.07'' 1.8mm - C 0.04'' 1.0mm A 0.25'' 6.6mm - B 0.41'' 10.5mm - C 0.08'' 2.0mmD 0.14'' 3.5mm - E 0.18'' 4.5mm

30 - Plastic Replaceable Tip Tweezers


A 5'' 130mm - B 0.025'' 0.6mm - C 0.04'' 1.0mm


A 5'' 130mm - B 0.025'' 0.6mmC 0.03'' 0.8mm - D 0.35'' 9.0mm - E 45°

258.SA257.SA

4 1/4'' 110mm 4 1/4'' 110mm

251.SA 252.SA

254.SA

256.SA

253.SA

255.SA

4 1/4'' 110mm 4 1/4'' 110mm

4 1/4'' 110mm 4 1/4'' 110mm

4 1/4'' 110mm 4 1/4'' 110mm

Carbofib soft tweezers, scratched proof specifically designed to handle sensitive parts.

Soft Tip Tweezers

CF

CP

LC

SV

A00CF

A00CP

A00LC

A00SV

00

A2ABCF

A2ABCP

A2ABLC

A2ABSV

2AB

A2ACF

A2ACP

A2ALC

A2ASV

2A

A2WFCP

2WF

A4WFCP

4WF

A5CF

A5CP

A5LC

A5SV

5

A7CF

A7CP

A7LR

A7SV

7

A242CF

A242CP

A242LC

A242SV

242

A242BCF

A242BCP

A242BLC

A242BSV

242B

A246CF

A246CP

A246LC

A246SV

246

A249CF

A249CP

A249LC

A249SV

249

A259CF

A259CP

A259LC

A259SV

259

Replaceable Tip Sets Part Numbers

Soft Tip Tweezers - 31

707.CF707.DG707.LR707.SV

702A.CF702A.DG702A.LR702A.SV

A 4 1/2'' 115mm - B 0.08'' 2.0mm - C 0.04'' 1.0mm A 4 1/2'' 115mm - B 0.02'' 0.5mm - C 0.025'' 0.6mm

705.CF705.DG705.LR705.SV

707A.CF707A.DG707A.LR707A.SV

709.CF709.DG709.LR709.SV

K6CFK6SV

708.CF708.DG708.LR708.SV

710.CF710.DG710.LR710.SV

A 4 1/2'' 115mm - B 0.02'' 0.5mm - C 0.045'' 1.2mm A 4 1/2'' 115mm - B 0.025'' 0.6mm - C 0.04'' 1.0mm

A 4 1/2'' 115mm - B 0.02'' 0.5mm C 0.04'' 1.0mm - D 0.35 9.0mm - E 45°

A 4 1/2'' 115mm - B 0.013'' 3.3mm - C 0.02'' 0.5mm

A 4 1/2'' 115mm - B 0.03'' 7.7mm - C 0.02'' 0.5mm carbofib plastic tweezers set 702ACF, 705CF, 707CF,708CF, 709CF, 710CF plastic wallet

High precision plastic tweezers available in four different meterials for various applications.

Plastic Tweezers

32 - Plastic Tweezers


Material Specifications

METALS

Nonferrous alloy type BR¬ Brass (CuZn37)¬ copper-zinc alloy¬ non-magnetizable¬ good to excellent corrosion resistance; all copper alloys

resist corrosion by fresh water and steam¬ excellent cold workability (forming)¬ generally it is utilized when high mechanical properties

are not required¬ typical applications include tweezers for handling

scratch-sensitive mechanical parts, watch components,magnets

Carbon steel type C¬ Carbon steel (Material number 1.1221, Ck60, AISI

1060)¬ contains from 0,57 to 0,65 wt% carbon¬ magnetizable¬ will be hardened by heat treatment, max. hardness 57

HRC¬ poor resistance to corrosion¬ used where strength and/or hardness are of primary

concern.¬ typical applications include tweezers and cutting tools

for the electronic industry, watch-makers, jewelersapplications.

Nonferrous alloy type N¬ Nickel silver 65-18 (CuNi18Zn20)¬ copper-nickel-zinc alloy¬ non-magnetizable¬ soft and elastic¬ all copper alloys resist corrosion by fresh water and

steam. Copper nickels provide superior resistance tosaltwater corrosion, have high resistance to alkalies andorganic acids, but have poor resistance to inorganicacids

¬ good cold workability (forming)¬ typical applications include handling of scratch-sensitive

parts in electronic, micro-mechanical and jewelleryapplications

Superalloy NC¬ Ni-Cr-Mo superalloy¬ excellent strength from room temperature to 800°C¬ six times harder than antimagnetic stainless steel¬ resistant to fatigue, very high shape retention¬ fully non-magnetic¬ excellent corrosion resistance to most chemicals, salts

and acids

¬ typical applications include non-magnetic tools for elec-tronic and watch industry applications and for laborato-ry and medical applications in aggressive chemical envi-ronments.

Nonferrous alloy type PB¬ Phosphor bronze (CuSn8P)¬ copper-tin alloy¬ non-magnetizable¬ good to excellent corrosion resistance; all copper alloys

resist corrosion by fresh water and steam¬ good cold workability (forming)¬ generally it is utilized when, in addition to corrosion

resistance, good tensile properties are required¬ typical applications include tweezers for handling

scratch-sensitive mechanical parts, watch components,magnets

Stainless steel type S¬ Martensitic higher carbon steel (Material number

1.4034, DIN X46Cr13, AISI number 420)¬ contains from 12.5 to 14.5 wt% chromium¬ magnetizable¬ can be hardened by heat treatment, forming should be

done in the annealed condition¬ less resistant to corrosion than the austenitic or ferritic

grades¬ used where strength and/or hardness are of primary

concern and where the environment is relatively mildfrom a corrosive standpoint.

¬ typical applications include tweezers and cutting toolsfor the electronic industry, watch-makers, jewelers andlaboratory and medical applications in mild aggressivechemical environments

Stainless steel type SA¬ low carbon austenitic steel (Material number 1.4435,

DIN X2CrNiMo18-14-3, AISI number 316L)¬ contains from 16.5 to 18.5 wt% chromium and has

important quantities of nickel and molybdenum as addi-tional alloying elements

¬ non-magnetizable¬ good corrosion resistance to most chemicals, salts and

acids¬ generally used where corrosion resistance and tough-

ness are primary requirements¬ typical applications include tweezers for the electronic

industry, watch-makers, jewelers and laboratory andmedical applications in moderately aggressive chemicalenvironments

34 - Ideal-Tek, Electronic Catalogue

Nonferrous alloy type TA¬ Titanium Grade 1 (unalloyed titanium) ¬ engineering materials with extraordinary combination of

properties: relatively low density (4.5 g/cm3), goodmechanical properties and a very high melting point thatallows the use at high temperatures (1600°F, 870°C)

¬ good corrosion resistance at room temperature to air,marine and a variety of industrial environments

¬ good cold formability, high ductility¬ fully non-magnetic¬ generally it is used when in addition to the corrosion

resistance, high strength-to-weight ratio is required¬ bio-compatible (maintain cell integrity, no inflammatory

response),¬ typical applications include handling of components in

cleaning/chemical processes also at high temperature,histology, biology, medicine, surgery.

PLASTICS

Engineering plastic type CF¬ PA66/CF30 polyamide 66 reinforced with 30 wt% car-

bon fibre¬ heat stabilized¬ very high rigidity, excellent tensile and flexural strength,

fatigue and creep resistance¬ low friction, self lubricating properties, excellent wear

and abrasion resistance¬ good heat capability¬ good chemical resistance (oils, grease, fuels, non polar

solvents); not resistant to strong acids, alkalis and hotwater or steam

¬ ESD safe material, (avoids dust attraction, sparks gen-eration, ignition sources).

¬ very low coefficient of linear thermal expansion¬ typical applications include handling of sensitive com-

ponents and devices (electronic components, micro-mechanical parts, glass and ceramic substrates, capil-lary, etc.)

High-performance plastic type CP¬ PEEK/CF30 polyetheretherketone reinforced with 30

wt% carbon fibre¬ very hard, rigid, high tensile and flexural strength, very

high wear resistance¬ high heat capability (260-300°C), good dimension sta-

bility, low thermal linear expansion coefficient¬ excellent resistance to chemicals and aggressive

agents, excellent resistance to thermal ageing. ¬ ESD safe material, low surface resistivity (106 Ohm)¬ typical applications include handling of components in

cleaning/chemical/assembly processes also at hightemperatures (soldering).

Engineering plastic type DG/DL¬ POM/GF30 acetal resin reinforced with 30 wt% glass

fibre¬ good tensile and flexural strength, fatigue and creep

resistance¬ low friction, good wear and abrasion resistance¬ low moisture absorption¬ good chemical resistance (oils, grease, fuels, organic

solvents); not resistant to strong acids, alkalis and oxi-dizing agents; good hydrolytic resistance (hot water)

¬ insulating¬ typical applications include handling of very scratch

sensitive components

Engineering plastic type LC¬ PPS/GF30 polyphenylene sulphide reinforced with 30

wt% glass fibre ¬ very hard, rigid, high tensile and flexural strength, creep

resistance¬ high heat capability (230-260°C), good dimension sta-

bility, low thermal linear expansion coefficient¬ excellent chemical resistance (organic solvent, oils,

grease, fuels, acids and alkalis); not resistant only tohydrochloric acid and oxidizing agents, excellent resist-ance to thermal ageing, very low moisture absorption

¬ ESD safe material, low surface resistivity (104-105 Ohm)¬ microwave transparent ¬ typical applications include handling of components in

soldering and cleaning/chemical processes also at hightemperature

Engineering plastic type LR¬ PPS/GF30 polyphenylene sulphide reinforced with 30

wt% glass fibre¬ very hard, rigid, high tensile and flexural strength, creep

resistance¬ high heat capability (230-260°C), good dimension sta-

bility, low thermal linear expansion coefficient¬ excellent chemical resistance (organic solvent, oils,

grease, fuels, acids and alkalis); not resistant only tohydrochloric acid and oxidizing agents, excellent resist-ance to thermal ageing, very low moisture absorption

¬ insulating¬ microwave transparent ¬ typical applications include soldering processes, han-

dling of components in cleaning/chemical processes.

High performance plastic type SV¬ PVDF polyvinylidene fluoride carbon fibre reinforced¬ excellent mechanical strength and toughness¬ smooth surface¬ heat stabilized, high heat capability, continuous use

temperature up to 150°C¬ high purity (clean room and medical devices approved,

low extraction value)


¬ excellent chemical resistance to most aggressive sub-stances (mineral and organic acid) and solvents (hydro-carbons, alcohols, halogenated), resistant to halogens

¬ outstanding resistance to hydrofluoric acid (40% conc.,90°C), nitric acid (50% conc., 90°C), hydrochloric acid(36% conc., 90°C)

¬ high abrasion resistant¬ resistant to UV and nuclear radiation (sterilisation)¬ ESD safe material, (avoids dust attraction, sparks gen-

eration, ignition sources)¬ typical applications include handling of very scratch-

and contamination-sensitive components, cleaning andetching processes

CERAMICS

Advanced Ceramic type MZ¬ Zirconia Toughened Alumina (ZTA)¬ a superior combination of high strength (from zirconia)

and high hardness (from alumina)¬ relatively low density¬ no open porosity¬ very hard surface, good abrasion and wear resistance¬ good flexural strength and fracture toughness¬ excellent thermal properties and high temperature sta-

bility¬ extreme corrosion resistance, nearly chemically inert¬ electrically insulative¬ typically applications includes soldering processes,

handling of components during thermal and chemicalprocesses. Generally used when very rigid tips arerequired

COATINGS

Engineering coating type DR¬ NBR vulcanized nitrile rubber¬ very soft and elastic, good tear resistance¬ outstanding abrasion/wear resistance (improved life-

time)¬ good chemical resistance (oils, grease, fuels, acid,

detergents and soaps ); good hydrolytic resistance (hotwater)

¬ electrically static dissipative, low surface resistivity (108-109 Ohm), ESD-safe material!

¬ typical applications include ESD-safe handles, floor andwork surface mats

High-performance coating type DC¬ DC Diamond-like carbon coating¬ High hardness (up to 80 GPa) ¬ High adhesion to the metallic substrate¬ Black colour¬ Low thickness (2 microns), high elasticity¬ Extremely high wear and abrasion resistance (protects

fine tip tweezers from wearing).¬ No particulate shedding (no contamination of the han-

dled components).¬ Chemically inert up to 350°C.¬ Bio-compatible (maintain cell integrity, no inflammatory

response), no contamination of biological tissue withmetal particles.

¬ Electrically conductive. ESD safe coating (no dustattraction, no fire or explosion risk).

Engineering coating type EP¬ EP polyester epoxy coating comprise essentially poly-

ester and epoxy resins¬ Impact resistant surface with excellent flow; good elas-

ticity¬ Can operate continuously at temperatures up to 120°C.¬ This coating provides an insulating coating with surface

resistance > 1012 Ohm¬ Good resistance to many diluted acids and alkalis.

Contact with organic solvents is possible conditionallyand for short term. Resistance should be investigatedfor the case in question.

¬ Typical applications include tweezers handles (bettergrip, high comfort)

Engineering coating type NE¬ NE polyester epoxy coating comprise essentially poly-

ester and epoxy resins, plus the electrically conductiveadditives.

¬ Impact resistant surface with excellent flow; good elas-ticity

¬ Can operate continuously at temperatures up to 120°C.¬ This coating provides a ESD Safe coating with surface

resistance 105-106 Ohm¬ Good resistance to many diluted acids and alkalis.

Contact with organic solvents is possible conditionallyand for short term. Resistance should be investigatedfor the case in question.

¬ Typical applications include tweezers handles (bettergrip, high comfort)

Engineering coating type TE¬ TE is a solvent-based liquid Teflon® coating is formulat-

ed with special blends of fluoropolymers and otherhigh-performance resins to improve toughness andabrasion resistance.

¬ Substances will permanently adhere to a Teflon® finish.


Although tacky materials may show some adhesion,almost all substances release easily.

¬ The coefficient of friction of this Teflon coating is gener-ally in the range of 0.20 to 0.25, depending on the load,sliding speed, and particular Teflon® coating used.

¬ Since surfaces coated with Teflon® are both oleophobicand hydrophobic, they are not readily wetted. Cleanupis easier and more thorough - in many cases, surfacesare self-cleaning

¬ Can operate continuously at temperatures up to 150°Cand can be used for intermittent service up to 200°C.

¬ Over a wide range of frequencies, Teflon® has highdielectric strength, low dissipation factor, and very highsurface resistivity.

¬ Many Teflon® industrial coatings withstand severe tem-perature extremes without loss of physical properties.Teflon® industrial coatings may used at temperatures aslow as -270°C/-454°F.

¬ TE is normally unaffected by mild chemical environ-ments. It has good resistance to diluted acids, dilutedand concentrated alkalis and organic solvents.

¬ Typical applications include tweezers for the handling ofvery scratch-sensitive components or wafers.

Industrial coating type NP¬ This pure nickel coating is generally used to improve the

resistance of tools made of carbon steel. The coating isdeposited by electroplating technique.

¬ Mechanical propertiesThis coating is hard and elastic and has a very goodresistance to mechanical stress.Thickness : 20-30 micronsHardness: 200-500 VickersTensile Strength: 70-140 kg/mm2Elongation: 25-35%

¬ Wear and abrasion resistance:Improved resistance to wear and abrasion.

¬ AgingSuperior aging and oxidation resistance.

¬ Chemical resistanceSuperior corrosion resistance to saltwater, alkalies andorganic acids


The Professional Range of blades and handles are produced with Craft 'Professionals' and enthusiasts in mind. They are used in a variety of different industries from Mold Cutting and Jewellery Manufacture to Printing and Artwork.

The handles are supplied carded. Spare Parts in a packet of 5 blades in a retail pack form.

Professional Scalpels and Blades

Scalpel Handle 5 with ACM28SM

ACM7SM ACM10SM ACM11SM

ACM16SM ACM17SM

ACMH1

310 310A 311

312 313

315

314

Handle 3

ACM2SM ACM18SM ACM22SM

ACM24SM ACM28SM

ACMH5

418 419 420

421 422

424 436

423

Handle 4

2338

Scalpel Handle 1 with ACM11SM

Plastic Handle with 25A Tip

Handle only

Handle only


C-2030 C-2048

C-20

P-500

P-504

C-18

C-2050

P-502

Tip flush cutter, cutting angle 60° for use in dense areas. Flush cutter, reverse cutting edges, cutting angle 48°.

Flush cutter with extra sharp cuttingedges for very delicate work.

Same as C-18 but shorter and thinner,rounded off external edges.

Flush cutter, cutting angle 50°. Long nose plier, rounded off externaledges, smooth jaws.

45° angle, smooth jaws. Ultra-light plier for use in dense and delicate areas,non-serrated.

Ultra-slender and light weight for easy use in hard-to-reach areas. Precision cutting edges. Anatomically shaped. Nonslip PVC handles. Heat treatment with precise hardness tests. Lifetime return spring. Black-burnished for vision comfort.

Pliers and Cutters


170-II Series shears offer numerous ergonomic enhancements in a "popularly priced" tool. Principal among them is oureffort reducing Micro-Shear® cutting action. Their shearing cut requires only about half the effort to cut a wire as thatrequired by a conventional compression type cutter. They feature advanced ergonomic shape grips, a glare eliminatingblack finish, light weight and our patented, life-time warranted, Light Touch™ return spring. Manufactured from high car-bon steel, their Rockwell hardness is a durable 54-56C. They are optionally available with static control (AS) grips.

Microsheares and Micropliers

175AS 475CC

175170

Same as 175, ESD Safe

Microspatulas blue, 0.014" 0.3 mmMicrospatulas green, 0.022" 0.5 mmMicrospatulas red, 0.033" 0.8 mmMicrospatulas black, 0.008" 0.2 mm

Combination cutter/short nose plier. Multi-use combinationplier is a hard wire cutter as well as a short nose plier. Onesingle tool for cutting and positioning. Full shear cutter for upto 12 AWG (1.8 mm) copper wire or 20 AWG (0.8mm) musicwire. High precision plier can literally hold a human hair.

Flush-cuts off wire (copper,nickel etc) up to 1 mm diame-ter. Thin profile for tight and hard-to-reach areas. Hardened carbon steel.

Safety lead catcher. Requires 50% less cutting effort. Lightweight. Flush-cuts off wire (copper, nickel, etc) up to 1mmdiameter. Thin profile for tight and hard-to-reach areas.Hardened carbon steel.

BNRV

This handy tools can be used to apply lubricants to small moving parts. They can be also used as miniature spatulasfor the applications of adhesives in the assembly of electronic components.

Microspatulas

From left to right: blue, green, red, black


Ideal Tek’s new line of multy purpose tool for electronics, chemistry and watch making. Magic Wand can be used as: probe for lead-free soldering operations, positioning aid tool forassembly operations, spatula for applying adhesives, dosing chemicals in labs, stirring rod for thepreparations of adhesives, solutions,…, scraper to remove solder masking agents, rubber latex,adhesive coatings.Magic Wand is available in two different ESD-safe high performance plastics:1. CP: high performance PEEK reinforced with carbon fibre, very high chemical resistance, very

high temperature resistance (up to 300°C), most appropriate for lead-free soldering applica-tions even at the high temperatures needed for lead-free alloys and for applications withchemicals (except strong acids).

2. SV: high performance PVDF (Teflon like material) reinforced with carbon fibre, smooth surface, extremely high acid resistance, mostappropriate for scratch-sensitive components or for applications with acids

Art. No. TypeMPT1.CP / MPT1.SV fine tip and flat strong tipMPT2.CP / MPT2.SV curved fine tip and flat strong tipMPT3.CP / MPT3.SV flat large fine tip and flat fine sharp tipMPT123.CP / MPT123.SV 3 pcs kit

Magic Wand

Complete with three rubber suction cups (Ø 2mm,4mm,7mm). Will replace traditional tweezers to hold components with smooth and delicate surface(anti-scratch). Ideal for SMD positioning and vertical handling of components in crowded and hard toreach areas. May be used with all pick-up probes.

Art. No. TypeP-830 Pocket Vacuum Syringe with three suction cups

Pocket Vacuum Syringe

Vacuum Tools

Vampire is the new battery-free hand held vacuum pick up pen designed for the safe pick-upof SMD components during assembly, test and rework processes. With fountain-pen dimen-sions, Vampire grabs, lifts and places components in complete safety, aided by a powerful inter-nal piston and a full ESD protection. A complete choice of tips designed for any size of SMDcomponent helps the operator to have always the right tool in hand.

Art. No. TypeUVO000000 Vacuum tweezer set including:1Vampire body, 1 conductive metal straight needle,

1 45°angled metal needle, 1conductive rubber cup 4mm, 1 conductive rubber

cup 6mm, 1conductive rubber cup 9 mm, 1 lubricant kit

UVO000100 Spare replacement kit for Vampire Classic, including: 1 straight conductive metal needle, 1 45°angled conductive metal needle, 1 conductive rubber cup 4mm, 1 conductive rubber cup 6mm,1 conductive rubber cup 9mm

UVO000610 Spare ESD 4 mm cups

UVO000620 Spare ESD 6 mm cups

UVO000630 Spare ESD 9 mm cupsUVO000810 Straight needle with ESD 4 mm cup

UVO000820 Straight needle with ESD 6 mm cup

UVO000830 Straight needle with ESD 9 mm cup

UVO000910 45° needle with ESD 9 mm cup


Vampire Vacuum Pick-Up


UVO0001000 Vacuum set including: 1 Vampire body, 1 High Power conductive straight tip 9mm, 1 High Power conductive angled tip 9mm, 1 conductive straight metal needle, 1 conductive rubber cup 4mm, 1 conductive rubber cup 6mm, 1 lubricant kit

UVO0001100 1 High Power conductive straight tip 9mm, 1 High Power conductive angled tip 9mm, 1 conductive straight metal needle, 1 conductive rubber cup 4mm, 1 conductive rubber cup 6mm


Soder-Wick®, the world's leading brand of desoldering braid, is the fastest, cleanest and safestbraid in the industry. It significantly reduces rework/repair time and minimizes the risk of heat dam-age to the board. Its geometrically precise weave design allows for maximum capillary action andsolder capacity. Soder-Wick® desoldering braid optimizes heat transfer through the braid and intothe solder joint, resulting in faster wicking action than any other competitive braid. Minimal fluxresidue on the board speeds ups the cleaning process, or eliminates it entirely.

Soder-Wick® desoldering braid is available in various widths, lengths and flux types. Application-specific sizes allow for precision solder removal in a flash.

Art. No. Type Lenght [m]80-1-5 Rosin SD 0,8mm White 1.5m80-2-5 Rosin SD 1,5mm Yellow 1.5m80-3-5 Rosin SD 2,0mm Green 1.5m80-4-5 Rosin SD 2,8mm Blue 1.5m80-5-5 Rosin SD 3,7mm Brown 1.5m80-6-5 Rosin SD 5,3mm Red 1.5m50-2-100 Rosin 1,5mm Yellow 30.5m50-3-100 Rosin 2,0mm Green 30.5m50-4-100 Rosin 2,8mm Blue 30.5m

Soder Wick® Desoldering Braid

The duster that sprays in any direction with the biggest blast to clean anything fast- All-Way Spray can be sprayed in any direction without the risk of dispensing a liquid spray

that can freeze or damage sensitive surfaces- Safe on plastics- Nonflammable- Extra cleaning strength- Ozone safe; CFC/HCFC free- Ultra pure - leaves no residue

Art. No. Type ContentES1620E aerosol 200 ml

Ultra Jet® All-Way

The high-performance, pinpoint-accurate freeze spray that safely cools individual static sensi-tive components- Safe on plastics- Nonflammable - Can be used on energized circuits- Antistatic formulation ideal for use on static sensitive components- Frost free formulation- Isolates individual components without freezing surrounding areas


Freeze-It® Antistat

The plastic safe flux remover for cleaning rosin and rosin-based no-clean flux- Safe on plastics- Flammable - Not for use on energized circuits- Ozone safe; CFC/HCFC free- Dries fast- Leaves no residue- Removes flux from hard to reach areas

Art. No. Type ContentES835BE BrushClean™ System 200 ml

Rosin

Rework and Repair


The first non-ozone depleting, nonflammable flux remover safe for use on plastics- Safe on plastics- Nonflammable - Can be used on energized circuits - Ozone safe; CFC/HCFC free- Cleans type R, RMA, RA, and no-clean fluxes- Dries fast- Leaves no residue- Removes flux from hard to reach areas


Flux-Off® VZ

The pen for applying flux with precision and control- Chisel tip marker provides exact delivery of flux to surface- Easily removed with appropriate Flux Remover Pen or Flux-Off® flux remover

Art. No. Type ContentCW8200 Rosin Flux Dispensing Pen 9.0 g

CircuitWorks® Flux Dispensing Pen

The pen for precise removal of flux from printed circuit boards- Completely removes flux in seconds- Spot cleans tight tolerance areas on circuit boards- Marker dispenser provides controlled and exact application- Dries fast

Art. No. Type ContentCW9200 Rosin Flux Remover Pen 8.0 g

CircuitWorks® Flux Remover Pen

The pen dispenser for drawing highly conductive silver traces, jumpers and shielding with pre-cision and control- Quickly creates conductive silver traces on most surfaces- Valved pen tip for easy application- Can be soldered at low temperatures- Dries in minutes at room temperature

Art. No. Type ContentCW2200STP Standard Tip 8.5 g

CircuitWorks® Conductive Pen


The pen dispenser for precise application of a tough protective acrylic conformal coating- Protects Conductive Pen (CW2200) traces- Repairs permanent solder mask- Protects against shorting, arcing, abrasion and moisture- Dries in minutes at room temperatures

Art. No. Type ContentCW3300G Green 4.9 g

CircuitWorks® Overcoat Pen

The pen for cleaning and lubricating gold and other noble metal contacts and connectors- Cleans and leaves protective lubricant in one step- Extends the life of noble metal contacts- Chisel tip marker for exact delivery of solvent to surface- Safe on most plasticsArt. No. ContentCW7400 8.5 g

CircuitWorks® Gold Gard™ Pen

The conveniently-packaged epoxy for precision repairs and high-strength conductive bonding- Conductive silver epoxy provides excellent electrical conductivity- High-strength conductive bonding- Repairs defective traces and creates jumpers to board- Quick solderless electronic connections

Art. No. Type ContentCW2400 Adhesive 7.0 g

Hardener 7.0 g

CircuitWorks® Conductive Epoxy

The fast curing, peelable temporary solder masking agent- Dries tack-free in 30 minutes- Easy to use - just peel off dried mask- Latex material is compatible with flux systems and stable with cleaning solvents

Art. No. Type ContentCM8E liquid squeeze bottle 250 ml

Chemask®

The powerful flux remover for high temperature, Lead-Free flux removal- Engineered for removing high temperature, lead free flux- Can also be used to remove Tin/Lead fluxes- Flammable- Ozone safe- Evaporates quickly without leaving residue- RoHS Compliant

Art. No. Type ContentES897BE Flux-Off Lead-Free 170 g

Flux-Off® Lead-Free Flux Remover

The fastest, safest de-soldering braid specifically for use with Lead-Free applications - Engineered specifically for high temperature, Lead-Free solders- Transfers heat to the solder joint more quickly and efficiently than conventional desoldering braids- Specifically designed for all Lead-Free solders, can also be used with Tin/Lead solders- Soder-Wick® Lead-Free packaged in ESD-safe static dissipative bobbins- Minimizes the risk of damage associated with static electricity- Non-corrosive ultra high purity no-clean flux- Will not leave ionic contamination on the boards- Especially effective at removing residual solder from SMT pads- RoHS Compliant- Patent Pending

Art.No Type Width [mm] Lenght [m]40-1-5 Nr. 1 0,8 1,540-2-5 Nr. 2 1,5 1,540-3-5 Nr. 3 2,0 1,540-4-5 Nr. 4 2,8 1,5

The pen for applying Lead-Free flux with precision and control- Applies a noncorrosive, halide free, no clean flux for high

temperature, Lead-Free application- Can also be used to for Tin/Lead fluxes- Flux meets Bellcore TR-N-NWT-000078 and IPC SF-818

for Surface Insulation Resistance- Flux meets ANSI / IPC J-STD-004, Type ROL0- Easily removed with Lead-Free Flux Remover Pen, or Flux-

OffË Lead-Free Flux Remover- RoHS Compliant

Art. No. Type ContentCW8400 Lead-free flux dispensing pen 9,0 g

CircuitWorks® Lead-Free Flux Dispensing Pen

Pb

The pen for removing Lead-Free flux with precision and control- Completely removes lead free flux residues in seconds- Can also be used to remove Tin/Lead fluxes- Marker dispenser provides controlled and exact application- Dries fast- RoHS Compliant

Art. No. Type ContentCW9400 Lead-free flux removing pen 8,0 g

CircuitWorks® Lead-Free Flux Removing Pen

The high temperature peelable temporary mask ideal for lead free applications - Formulated for use with Lead-Free applications- Can also be used with Tin/Lead solders- Usable within five minutes of application with preheat cycles- Provides short-term high temperature protection- RoHS compliant

Art. No. Type ContentCLF8E squeeze bottle 240 ml

Chemask® LF Solder Masking Agent

Lead-Free Rework and Repair

Soder-Wick® Lead-Free SD Desoldering Braid



Ultra-compact and anatomic design - With or without flame (patent catalytic) - Cordless, gas powered (butane power) - Continued operating time 1 hour - Adjustable power from 10 to 60 watts - All weather turbo flame

Length: 178 mm Weight: 75 g Operating time: 90 min Max. temperature: 580 °C

Art. No. TypeKit Pro Piezo Pro Piezo with Tips PPT-6; PPT-9; PPT-10; PPT-11; PPT12Pro Piezo Single Iron with Tip PPT-6Pro Piezo Tips PT-1: 1.0 oblique, PPT-2: 2.4 oblique, PPT-3: 3.2 oblique, PPT-4: 4.8 oblique, PPT-5: 1.0 flat, PPT-6: 2.4 flat, PPT-7: 3.2 flat

PPT-8: 4.8 flat, PPT-9: Hot Blow, PPT-10: Knife Tip, PPT-11: Deflector, PPT-12: Flame

- Total portability - Refill in 10 sec. - Auto-switch-off - Long life iron plated soldering tips - Gas torch, hot air and hot knife tips - Adjustable power from 10 to 60 watts - High material quality

Length: 177 mm Weight: 60 g Operating time: 90 min Tip temperature: 450°C Gas type: Gas lighter fuel

Art. No. TypeMK2S Single Soldering Iron with Tip CX24MK2K-B Kit with Tips CX24, CX90, CX81, CX70 in blister packageMK2K-C Kit with Tips CX24, CX90, CX81, CX70 in carton packageProfessional Tips CX10: Tip oblique 1,0 mm, CX24: Tip oblique 2.4 mm, CX32: Tip oblique 3.2 mm, CX48: Tip oblique

4.8 mm, CX70: Knife Tip, CX81: Hot Blow, CX90: Flame

Professional Iron

- Portable butan powered soldering iron - Adjustable from 10 to 60 watts - Rapid refill (10 sec) - Auto switch-off - Built-in ignitor - Excellent build quality

Length: 170 mm Weight: 60 g Operating time: 60 min Max. temperature: 450 °C Gas type: Gas lighter fuel

Art. No. TypeMK1-T Single Soldering Iron with Tip CT24Technic Tips CT10: Tip oblique 1.0 mm, CT24: Tip oblique 2.4 mm, CT32: Tip oblique 3.2 mm,

CT48: Tip oblique 4.8 mm, CT70: Knife tip

Technic Iron

Soldering Irons and Soldering Tools

Pro Piezo Iron


Art. No. TypeGas Torch GT220

Gas Torch

Technical Data- Powerful robust flame 1300 °C (adjustable,

wind resistant, antiflare) - Lightweight, compact and ergonomic grip - Childproof ignition - Removable safety stand - Fuel level window

Applications- Shrink tubing - Automotive repair - Industrial maintenance - Welding - Paint stripping - Plastic fusing - Dental work - Jewellery - Culinary

- Sturdy all metal high precision Swiss tool. - Completely corrosion free. - Heat resistant Teflon noozle. Easy and fast replacement. - The noozle is cleared of any solid solder each time the tool is re-loaded. - Unique pull-spring mechanism for strongest but muffled and recoilless sucking action. - A protective shield keeps tin residues out of spring spiral. No cleaning or maintenance is nec-

essary. - "Anatomic" design and size for effortless use.

Length : 19 cm = 7 1/2" (including tip) Weight: 70 gr.

Art. No. Type190 Mini Desoldering Pump with Teflon Tip T27190-T27 Replaceable Teflon Tip190-ATA Replaceable antistatic Tip

Mini Desoldering Pump

Made of special steel to which solder will not adhere. Hexagonal plastic handles. Length 17.5 cm Fork: Wire twisting and easy unwinding and removal Brush: Stainless steel. Cleans connections before soldering Hook and spike: Extraction tools. Spike for cleaning holes or marking PC boards. Knife and scraper: Removes surplus solder. Cutting and reparing

Art. No. TypeFB Fork + BrushHS Hook + SpikeKS Knife + ScraperFB-HS-KS 3 Pieces Kit

Soldering Aid Tools


The circuit board holder PCSS and PCSA Series are the perfect support for the assembly and soldering/de-soldering processes of circuit boards. The holder can be easily demounted in single parts and reassembled in different combinations.

For technical information please visit www.ideal-tek.com.

Art. No. TypePCSS-0 210x220 mm PCSS-1 280x290 mm PCSS-2 520x280 mm PCSS-4 520x410 mm

PCSA-0 210x220 mm (ESD safe Foam) PCSA-1 280x290 mm (ESD safe Foam) PCSA-2 520x280 mm (ESD safe Foam) PCSA-4 520x410 mm (ESD safe Foam)

PCSS-0.2 Replaceable Foam PCSS-1.2 Replaceable Foam PCSS-2.2 Replaceable FoamPCSS-4.2 Replaceable Foam

PCSA-0.2 Replaceable Foam (ESD safe) PCSA-1.2 Replaceable Foam (ESD safe) PCSA-2.2 Replaceable Foam (ESD safe) PCSA-4.2 Replaceable Foam (ESD safe)

BS-PCSS-0 Replaceable Splint BS-PCSS-1 Replaceable Splint BS-PCSS-2 Replaceable Splint BS-PCSS-4 Replaceable Splint

PCSS and PCSA Circuit Board Holders

PC-40 is the new practical desk adjustable repair stand, dedicated to all reworkoperations. 360° rotation of the board; PC-40 may be installed on any workbench. Dimensions: 300x120x120mmMaximum board length: 250mm

PC Board not included

Art. No. TypePC-40 PCB Bench Support 300x120x120mm

Adjustable PCB Bench Support


802.01 812.01 818.01

Plastic case. Lens Ø 24mmHighest quality10x Magnifierwith mm scale

Plastic case. Lens Ø 24mmHighest quality8x Magnifier

Plastic case Lens Ø 24mmHighest quality 8x Magnifierwith mm scale

Vinile CaseLenght Ø 25mm4 lenses fully coatedHighest quality 7x Magnifier with mm and iches scale

Vinile CaseLenght Ø 19mm3 lenses fully coatedHighest quality 10x Magnifier with mm and iches scale

ALCRON

- Microscope 30 x - Gives unparalleled sharp and brilliant vision with wide

field of view with 30 x magnification. - Unique built-in light and easy focussing system. Uses

two standard 1.5 V batteries. - A must for inspection of PC boards and miniature parts.

Art. No. TypeAlcron Microscope 30XAlcron Scale Front case with mm scale

M1207 M1210

Visual Inspection

8005-26D 7.7x8005-20D 6x8005-16D 5x8005-13D 4.4x8005-11D 3.8x8005-10D 3.5x8005-8D 3x

8008

Watchmaker'sloupe, 23.5mmsingle lens

ControlWatchmaker'sloupe, double lense16mm and 23.5mm lenses.12x, 5x Magnifier

EMR Vision Set

Small mirrors designed for optical inspection of the hidden corners or of the bottom side ofcomponents on boards. Typical application is the verification of solder joints and contacts.Designed for usage in connection with illuminated lenses and magnifiers.

Art. No. TypeEMR Kit with handle and 1 Square mirror-probe (9.5 mm) straight

needle, Side Small rectangular mirror-probe (9.5 x 3 mm) 45° angled needle, T-Large rectangular mirror-probe (19 x 5 mm) 45° angled needle

EMR1001001 Kit with handle and 1 Square mirror-probe (9.5 mm) straight needleEMR1001002 Kit with handle and Side Small rectangular mirror-probe

(9.5 x 3 mm) 45° angled needleEMR1001013 Kit with handle and T-Large rectangular mirror-probe

(19 x 5 mm) 45° angled needleEMR HT Same as EMR but engineered for high temperature resistance (NEW)EMR2001001 Kit with handle and 1 Square mirror-probe (9.5 mm) straight needleEMR2001002 Kit with handle and Side Small rectangular mirror-probe

(9.5 x 3.0 mm) 45° angled needleEMR2001013 Kit with handle and T-Large rectangular mirror-probe

(19.0 x 5.0 mm) 45° angled needle


Economical general purpose swabs. Best solvent retention. The most cost-effective swabs for general purpose applications.100 ppi reticulated medical grade foam provides excellent particleentrapment. The open cell structure gives the best solvent holding ability of any style of swab. These swabs are free of adhesives orbinders that could contaminate your process. Fiberless construction does not generate particles.

Handle Material: polypropyleneHead material: polyurethane foamSale units: 1 bag of 125 swabs

1 box of 20 bags

Sealed foam swabs

IT41050 Small

Swab length: 2. 8” 7.2 cmHandle width: 0.10” 2.6 mmHead length: 0.40” 10.2 mmHead thickness: 0.13” 3.3 mmHead width: 0.14” 3.5 mm

IT44070 Small pointed


IT48040 Micro flexible


Sealed polyester swabs

IT38040 Micro polyester knitted

Swab length: 2.7” 6.9 cmHandle width: 0.09” 2.3 mmHead length: 0.44” 11.2 mmHead thickness: 0.09” 2.4 mmHead width: 0.12” 3.0 mm

IT38140 Mini polyester knitted


IT38540 Mini polyester non woven


Very clean and durable all-purpose swabs.An exceptionally clean swab produced by Coventry's proprietary process of thermoforming and welding the swab head. Featuring eitherknit or nonwoven fabric heads, these swabs are acid and solvent resistant. Sealed edges build in high strength with no loose fibers or par-ticulates. They are ideal for tough scrubbing around raised shapes. Cleanroom process gives you the lowest ionic, non-volatile residue andparticle contaminants.

Handle Material: polypropylene flexibleHead material: knit or non-woven polyesterSale units: 1 bag of 125 swabs

1 box of 20 bags

Durable wrapped foam swabs designed for precise applications.Our wrapped foam swabs provide good particle entrapment and work well as solvent appli-cators. The small tips on many of the styles allow use in very tight tolerance areas. With themost durable head of any foam swabs, wrapped foam delivers superior abrasion resistancefor removal of tough contaminants. Wicking action pulls solvent from surfaces. The small tipallows use in very tight tolerance areas, while the pointed end works especially as pick.

Handle Material: nylonHead material: polyurethane foam

Sale units: 1 bag of 125 swabs1 box of 20 bags

Wrapped foam swabs

IT21050 Medium pointed


Swabs


Keep-Clean-Step

ESD-Safe Polyethylene Solvent Dispenser 120-180-240 ml. These dispensers haveno stopper or cap to remove. Just touch the dispensing dish with a brush, cloth orother applicator and solvent is brought to the surface the instant it is needed. Stainlesssteel valves seal contents in bottle until used, preventing spills, dripping and escapingfumes from endangering the technician. Fluid pumped into the dish doesn't drip backinto the bottle, keeping stored liquids uncontaminated. Bottles are available in a vari-ety of sizes. Made of static dissipative plastic. Surface resistivity of 10E7 to 10E9.

Art. No. TypeTDS12 ESD Fluid Dispenser 120mlTDS12AS ESD Anti-Splash Fluid Dispenser 120mlTDS18 ESD Fluid Dispenser 180mlTDS18AS ESD Anti-Splash Fluid Dispenser 180mlTDS24 ESD Fluid Dispenser 240mlTDS24AS ESD Anti-Splash Fluid Dispenser 240ml

TSD12 TSD12AS

Solvent Dispenser

Save Time, Money and Your Floor At least 80% of all dirt entering a building is brought in by foot or wheeled traffic. Good Manufacturing Practice (GMP) and qualityassurance require floor contamination control.

- Contamination in the workplace affects product yield, productivity, product quality and cost- Traffic borne contaminants can quickly degrade performance and finish of ESD floors

Preventing the contamination from entering the workplace is the most effective and least expensive method of contamination control.The specifically formulated adhesive applied to each disposable sheet of the KSC Mat aggressively removes and traps 95% of dirtparticles from shoes and wheels, preventing the spread of particles throughout manufacturing facilities. The monthly floor mainte-nance costs easily drop by more than 50%.

Traditionally, adhesive contamination control mats have been anchored to the floor by adhesive. While this works well on concrete andsimilar surfaces, it has been a limiting factor as to where adhesive mats could be used. The KSC Mat can be used on any surface with no concern of adhesive transfer to carpeted or finished floor surfaces. Our patent-pending frame system is the perfect solution for using adhesive mats on carpets, hardwoods, tiles or any other finished floor surface.

- Silicon-free adhesive- Non-skid bottom surface anchors frame securely to any floor surface- Soft rubber finish will not scratch or damage floor finish- Top surface allows for ease of replacing mat refills- Numbered adhesive sheets are removed at regular intervals to insure constant level of contamination control- Portability of frame allows easy placement and removal around construction sites- 65 x 40 cm (25” x 16”) size frame, 60 x 36 cm (24” x 14”) size mat- Lightweight frame is easily picked up and replaced during routine mopping

Applications for the Sticky Adhesive MatManufacturing Plants Medical Offices WarehousesOffice Buildings Dental Offices LaboratoriesHospitals Print Shops SchoolsConstruction Trailers Computer Rooms Food Packaging PlantsHealth/Fitness Clubs Machine Shops Automobile Dealerships

Sale units: KCS1: Keep Clean Step (1 frame + 30 adhesive layers)KCS1R: 1 refill kit (4 mats of 30 layers)


SMD Components Tester

Smart TweezersTM is a handheld LCR meterof a new concept. It provides a perfect solution for testing and identification of Surface Mount Devices as well as troubleshooting of complex electronic systems.

Its unique mechanical and electronic design combines a pair of precise gold-plated tweezers and a digital LCR meter in compact, lightweight, battery powered instrument. The probe is able to measure resistance, capacitance, inductance and voltage with high accuracy andautomatic component recognition.

Testing Surface Mount DevicesSurface mount devices are usually tiny and without wire leads, making it more difficult to test and identify SMD than conventional com-ponents.

Smart TweezersTM gives users an easy way to sort and evaluate loose components and to perform on-board measurements anddebugging.

Precise gold-plated tweezers are able pick and reliably contact even the smallest SMD components and take measurements fromalready mounted devices. The probe can also be used to test conventional components with wire leads too short to insert into the testterminals.

Fully Automatic MeasurementsSmart TweezersTM automatically determines type of the component (resistance/capacitance/inductance) and selects proper range forhigh accuracy measurements.

Unit’s display clearly indicates the type of the component, measurement result and test conditions.

Lightweight and ErgonomicThe integrated measurement head allow the operator to use one hand and focus attention on the tested component and on the job at hand. Sorting, testing and troubleshooting become more efficient and cost effective.

Smart TweezersTM

• Built-in high-precision LCR probe

• Convenient one-hand operation

• Ideal for Surface Mount Devices

• Automatic component recognition

• Automatic test range selection

• Precise tips for small-size devices

• Manual and voltage test modes

• Portable and ergonomic design

Smart TweezersTM greatly simplifies testing and troubleshooting process.

Resistance, capacitance and inductancecan be measured with automatic selec-tion of the test parameters and range.


Wide Spectrum of Functions Smart TweezersTM has dual mode voltmeter function. In AUTO mode, the DC voltage is measured. In TRACE mode waveform of the ACsignal is shown.Every test function have a manual mode when where is a need to measure a specific circuit parameter—L, C, R or voltage.Navigation and mode selection are performed using a Jog Dial button. The unit has a continuity detector with the beeper sound for resistance reading below threshold.

Physical Specifications Operating Temperature: 0 °C to +55 °C Battery Type: 3 x 1.5V LR44 Alkaline or Air Zinc Battery Life (continuous ): 80 Hours Alkaline, 240 hours Zinc Air (typical) Size: 14.0 x 2.5 x 3.0 cm (3.94 x 0.9 x 1.5 in) Weight: 53 grams (0.11lb)

Basic Specifications Measured Parameters: C+R (ESR), L+R, R Measuring Frequencies: 100Hz, 1 kHz, 10kHz Measurement rate: 4, 2, 1, 0.5 times per second (default 1) DC Voltage: 0 to 800 mV (up to 8V with manual setting) Resistance: 0.1 to 5 MOhm Capacitance: 1 pF to 4999 F (1pF - 5pF in manual mode) Inductance: 1μH to 499mH (1μH -4μH in manual mode)

Accuracy Specifications Resistance: Range: 10 Ohm - 5 MOhm Accuracy: 1% + 0.02 in the range 10 Ohm - 5 MOhm Test Frequency: 1kHz

Capacitance: Range: 20pF - 4999μF Accuracy: 3% + 1.7pF* *Typical offset 1.6pF for 0402 size component Resolution: 0.1pF in the range 1pF- 100pF st Frequency: 1kHz C >1000pF, 10kHz C <1000pF, 100Hz C >1μF

Inductance: Range: 10μH - 499mH Accuracy: 3% + 0.4μH** **Typical offset 1.4μH for 0402 size component Resolution: 0.1μH in the range 1μH - 100μH Test Frequency: 10kHz L <1mH, 1kHz L >1mH, 100Hz L <10mH

Art. No. TypeST-1 Smart Tweezers Set (whit standard tips)ST-AD-T Standard replaceable TipsST-AD-THP High precision replaceable TipsCalibration service available


Product Index

TWEEZERS0.S ........................50.SA......................50.TA ......................500.S ......................500.SA....................500.SA.DR............1200.TA ....................5000.S ....................5000.SA..................500B.SA ................500CF.SA..............2800CFR.SA ..........2900CPR.SA ..........2900D.S ..................500D.SA ................500D.TA..................500LC.SA ............2800LCR.SA ..........2900SV.SA..............2800SVR.SA ..........290A.SA ..................50C11.S ................50C11.SA ..............50C9.S ..................50C9.SA ................50C9.TA..................51.NC ....................51.S ........................51.SA......................51.TA ......................510G.SA ................711.N......................711.SA....................7119.SA................15119A.SA ............1512.N......................812.SA....................8120A.SA ............15121.SA................15121M.SA ............15122.SA................15123.SA................15124.SA................15125.SA................14125A.SA ............14126.SA................14127.SA................14128.SA................1414A.C ..................814AGW.C..............814AN.C ................8152.S ....................815A.C ..................8

15AFW.C ..............815AGW.C..............815AGWHM.SA......815AGW.DR ........1215ANW.C..............815AP.C..................815ASW.C ..............82.BR ....................52.NC ....................52.S ........................52.SA......................52.TA ......................5231.SA................15242CFR.SA ........30242CPR.SA ........30242LCR.SA ........30242SVR.SA ........30242BCFR.SA ......30242BCPR.SA ......30242BLCR.SA ......30242BSVR.SA ......30246CFR.SA ........30246CPR.SA ........30246LCR.SA ........30246SVR.SA ........30248CF.SA............28249CF.SA............29249CFR.SA ........30249CPR.SA ........30249LC.SA ..........29249LCR.SA ........30249SV.SA............29249SVR.SA ........30250CF.SA............29251.SA................31252.SA................31253.SA................31254.SA................31255.SA................31256.SA................31257.SA................31258.SA................31259CF.SA............29259CFR.SA ........30259CPR.SA ........30259LC.SA ..........29259LCR.SA ........30259SV.SA............29259SVR.SA ........30269CF.SA............29269LC.SA ..........29269SV.SA............2927.S ......................927.SA....................9

29.SA..................2629D.SA ..............262A.NC ..................62A.S......................62A.SA ..................62A.SA.DR............122A.TA....................62ABLC.SA ..........282ABSV.SA ..........282AB.S ..................62AB.SA ................62AB.TA..................62ABCF.SA ..........282ABCFR.SA ........292ABCPR.SA........292ABLCR.SA ........292ABSVR.SA ........292ACF.SA ............282ACPR.SA ..........292ALC.SA ............282ALCR.SA ..........292AMZ.SA ............272ASV.SA ............282ASVR.SA ..........292AX.SA ..............112AXCFR.SA ........302AXCPR.SA ........302AXLCR.SA ........302AXSVR.SA ........302AZ.SA ................62CF.SA................282LC.SA ..............282SV.SA................282W.SA ................192WF.SA ..............192WFCPR.SA ......192WFG.SA............192WL.SA ..............193.NC ....................63.S ........................63.SA......................63.SA.DR..............123.TA ......................630.SA..................2630D.SA ..............26321.SA................1533A.SA ..............1434A.SA ..............1435A.SA ..............1435AP.SA..............2035S.SA ..............2136AP.SA..............2137S.SA ..............2138FG.SA ............21

391.SA................2339FG.SA ............2139S2.SA ............2139S3.SA ............213C.NC ..................63C.S ....................63C.SA ..................63C.SA.DR ..........123C.TA....................63CB.S ..................63CB.SA ................63CCF.SA ............283CF.SA................283CI.SA ..................63CI.TA ..................63CLC.SA ............283CSV.SA ............283F.S ......................63F.SA ....................63LC.SA ..............283SV.SA................283W.SA ................193WF.SA ..............193WFG.SA............193WL.SA ..............193X.SA..................114.NC ....................64.S ........................64.SA......................64.TA ......................641W.SA ..............2142W.SA ..............2142WF.SA ............2142WFG.SA..........2143W.SA ..............2243WF.SA ............2243WFG.SA..........22444W.SA ............2344W.SA ..............2244WF.SA ............2244WFG.SA..........22456.SA................1645W.SA ..............2245WF.SA ............2246W.SA ..............2246WF.SA ............2246WFG.SA..........22475.SA................16475Y32.SA ..........948WF.SA ............224A.S......................64A.SA ..................64W.SA ................204WF.SA ..............20


4WFCPR.SA ......204WFG.SA............204WL.SA ..............204X.SA..................115.NC ....................65.S ........................65.SA......................65.SA.DR..............125.TA ......................651S.S....................951S.SA ................851S.TA..................852A.S....................952A.TA..................952A.SA ................955A.SA ..............2555AX.SA ............2555WFL.SA ..........2356A.SA ..............2556AX.SA ............2556WFL.SA ..........23571.SA................25572.SA................25573.SA................25577.SA................25578.SA................25579.SA................25581.SA................25582.SA................25583.SA................2558A.SA ..............2558WFL.SA ..........2359A.SA ..............255A.NC ..................65A.S......................65A.SA ..................65A.TA....................65AX.SA ..............115B.S......................75B.SA ..................75C.NC ..................75C.S ....................75C.SA ..................75C.TA....................75CF.SA................285CFR.SA ............305CPR.SA ............305LC.SA ..............285LCR.SA ............305SV.SA................285SVR.SA ............305TTH.S ................75TTH.SA ..............75TTHX.SA ..........11

5WF.SA ..............205WL.SA ..............205X.SA..................115XCF.SA..............285XCFR.SA ..........305XCPR.SA ..........305XLC.SA ............285XLCR.SA ..........305XSV.SA..............285XSVR.SA ..........306.NC ....................76.S ........................76.SA......................76.TA ......................760.SA..................13600M.SA ............2361A.SA ..............25637L.SA..............23637S.SA ............23637SB.SA ..........23640B.SA ............24647.S ..................16647.SA................16648.S ..................16648.SA................16649.S ..................16649.SA................1664A.SA ..............1365A.NC ..............1365A.S..................1365A.SA ..............1365A.TA................13666A.SA ............24667.SA................246WF.SA ..............206WL.SA ..............207.NC ....................77.S ........................77.SA......................77.SA.DR..............127.TA ......................7702A.CF ............32702A.DG ............32702A.LR..............32702A.SV..............32705.CF................32705.DG ..............32705.LR................32705.SV................32707.CF................32707.DG ..............32707.LR................32707.SV................32707A.CF ............32

707A.DG ............32707A.LR..............32707A.SV..............32708.CF................32708.DG ..............32708.LR................32708.SV................32709.CF................32709.DG ..............32709.LR................32709.SV................32710.CF................32710.DG ..............32710.LR................32710.SV................3271MZ.SA ............2772MZ.SA ............277312.SA..............267312B.SA ..........267313.SA..............267313B.SA ..........267314.NP ............267314.SA..............267314B.NP ..........267314B.SA ..........267316.SA..............267316B.SA ..........267318.SA..............267318B.SA ..........267320.SA..............267320B.SA ..........267325.SA..............267325B.SA ..........267330.SA..............267330B.SA ..........2673MZ.SA ............2774MZ.SA ............27775.SA..................97A.N ....................77A.S......................77A.SA ..................77B.S......................77B.SA ..................77B.TA....................77CF.SA................287CFR.SA ............307CPR.SA ............307E.S......................77E.SA....................77LC.SA ..............287LCR.SA ............307MZ.SA ..............277SV.SA................287SVR.SA ............30

7X.SA..................118.S ........................78.SA......................78.TA ......................785B.SA ..............2385C.SA ..............238WF.SA ..............208WNY.SA ............208WT.SA ..............2096.SA..................23A.S........................9A.SA ....................9A00CF ................31A00CP ................31A00LC ................31A00SV ................31A242CF ..............31A242CP ..............31A242LC ..............31A242SV ..............31A242BCF ............31A242BCP............31A242BLC ............31A242BSV ............31A246CF ..............31A246CP ..............31A246LC ..............31A246SV ..............31A249CF ..............31A249CP ..............31A249LC ..............31A249SV ..............31A259CF ..............31A259CP ..............31A259LC ..............31A259SV ..............31A2ABCF..............31A2ABCP ............31A2ABLC..............31A2ABSV..............31A2ACF ................31A2ACP................31A2ALC ................31A2ASV ................31A2WFCP ............31A4WFCP ............31A5CF ..................31A5CP ..................31A5LC ..................31A5SV ..................31A7CF ..................31A7CP ..................31A7LC ..................31A7SV ..................31


AA.NP ................16AA.S ..................16AA.SA ................16AA.SA.DR ..........12AA.TA..................16AC.S ....................9AC.SA ..................9AM.BR ..................9D.NP ..................17F.NC......................9F.S ........................9F.SA ......................9GG.NP ................16GG.SA ................16H.S ....................10H.SA ..................10K5HP.SA ..............7K5HP.S ................7K5HP.NC ..............7K5HP.TA................7K5SMD.SA..........18K6CF ..................32K6SV ..................32KCFR ..................30KCPR..................30KSVR ..................30M-00D.S ............10M-00D.SA ..........10M-2.SA ..............10M-2.S..................10M-2A.S ..............10M-2A.SA ............10M-3.S..................10M-3.SA ..............10M-4.S..................10M-4.SA ..............10M-5.S..................10M-5.SA ..............10M-AC.S ..............10M-AC.SA ............10M-HD.S ..............10M-HD.SA ............10MM.NP ..............16MM.SA................16NN.NP ................16NN.SA ................16PB.NP ................16RR.NP ................17RR.SA ................17S.S........................9S.SA ....................9SM100.SA ..........17SM101.SA ..........17SM102.SA ..........17

SM103SA ..........17SM104.SA ..........17SM105.SA ..........17SM106.SA ..........17SM107.SA ..........17SM108.SA ..........18SM109.SA ..........18SM110.SA ..........18SM111.SA ..........18SM112.SA ..........18SM113. SA ........18SM114. SA ........18SM115. SA ........18SM116. SA ........18SM117. SA ........18SP4T.SA..............24SP5T.SA..............24SP6T.SA..............24SS.NC ................13SS.S ..................13SS.SA ................13SS.TA..................13SS6.SA ..............13SS6.TA................13SSF.NC ..............13SSF.SA................13SSL.SA ..............13

PROFESSIONALSCALPELS ANDBLADES2338 ..................38310 ....................38310A ..................38311 ....................38312 ....................38313 ....................38314 ....................38315 ....................38418 ....................38419 ....................38420 ....................38421 ....................38422 ....................38423 ....................38424 ....................38436 ....................38ACM10SM ..........38ACM11SM ..........38ACM16SM ..........38ACM17SM ..........38ACM18SM ..........38ACM22SM ..........38

ACM24SM ..........38ACM28SM ..........38ACM2SM ............38ACM7SM ............38ACMH1 ..............38ACMH5 ..............38HANDLE 3 ..........38HANDLE 4 ..........38

PLIERS AND CUTTERSC-18 ..................39C-20 ..................39C-2030 ..............39C-2048 ..............39C-2050 ..............39P-500..................39P-502..................39P-504..................39

MICROSHEARES AND MICROPLIERS170 ....................40175 ....................40175AS ................40475CC ................40

MICROSPATULASBNRV..................40BLACK................40RED ....................40GREEN ..............40BLUE ..................40

MAGIC WANDMPT1.CP ............41MPT2.CP ............41MPT3.CP ............41MPT1.SV ............41MPT2.SV ............41MPT3.SV ............41MPT123.CP ........41MPT123.SV ........41

VACUUM TOOLSP-830 ................41UVO000000 ......41UVO000100 ......41UVO000610 ......41

UVO000620 ......41UVO000630 ......41UVO000810 ......41UVO000820 ......41UVO000830 ......41UVO000910 ......41UVO000920 ......41UVO000930 ......41UVO000100 ......41UVO0001100 ......41

REWORK AND REPAIR80-1-5 ................4280-2-5 ................4280-3-5 ................4280-4-5 ................4280-5-5 ................4280-6-5 ................4250-2-100 ............4250-3-100 ............4250-4-100 ............42ES1620E ............42ES1551E ............42ES835BE ............42ES6200E ............43CW8200 ............43CW9200 ............43CW2200STP ......43CW3300G ..........44CW7400 ............44CW2400 ............44CM8E..................44

LEAD-FREE REWORKAND REPAIR40-1-5 ................4540-2-5 ................4540-3-5 ................4540-4-5 ................45ES897BE ............45CW8400 ............45CW9400 ............45CLF8E ................45

SOLDERING IRONS ANDSOLDERING TOOLSKit Pro Piezo ......46Pro Piezo ............46Pro Piezo Tips ....46PPT-1 ................46


PPT-2..................46PPT-3..................46PPT-4..................46PPT-5..................46PPT-6..................46PPT-7..................46PPT-8..................46PPT-9..................46PPT-10................46PPT-11................46PPT-12................46MK2S..................46MK2K-B..............46MK2K-C..............46CX10 ..................46CX24 ..................46CX32 ..................46CX48 ..................46CX70 ..................46CX81 ..................46CX90 ..................46MK1T..................46CT10 ..................46CT24 ..................46CT32 ..................46CT48 ..................46CT70 ..................46GT220 ................47190 ....................47190-T27..............47190-ATA..............47FB ......................47HS ......................47KS ......................47FB-HS-KS ..........47

PCSS AND PCSA CIRCUIT BOARD HOLDERS PCSS-0 ..............48PCSS-1 ..............48PCSS-2 ..............48PCSS-4 ..............48PCSA-0 ..............48PCSA-1 ..............48PCSA-2 ..............48PCSA-4 ..............48PCSS-0.2............48PCSS-1.2............48PCSS-2.2............48PCSS-4.2............48PCSA-0.2............48PCSA-1.2............48

PCSA-2.2............48PCSA-4.2............48BS-PCSS-0 ........48BS-PCSS-1 ........48BS-PCSS-2 ........48BS-PCSS-4 ........48PC-40 ................48

VISUAL INSPECTION802.01 ................49812.01 ................49818.01 ................498005-26D ..........498005-20D ..........498005-16D ..........498005-13D ..........498005-11D ..........498005-10D ..........498005-8D ............498008 ..................49M1207 ................49M1210 ................49EMR....................49EMR1001001......49EMR1001002......49EMR1001013......49EMR HT ..............49EMR2001001......49EMR2001002......49EMR2001013......49ALCRON ............49ALCRON SCALE ..49

SWABS IT41050 ..............50IT44070 ..............50IT48040 ..............50IT38040 ..............50IT38140 ..............50IT38540 ..............50IT21050 ..............50

SOLVENT DISPENSERTDS12 ................51TDS12AS............51TDS18 ................51TDS18AS............51TDS24 ................51TDS24AS............51

KEEP-CLEAN-STEPKCS1 ..................51KCS1R................51

SMD COMPONENTSTESTERST-1 ..............52-53ST-AD-T ........52-53ST-AD-THP....52-53Calibration Service ..........52-53

How to find us

Balerna

Milan

Zürich

Luzern

From Milan, ItalyA8, direction Passing close to RhoHead towards: A9 Como - Chiasso (CH)Continue along: E35 / Autostrada dei LaghiContinue along: A9 / E35 towards: Como - Chiasso (CH)Passing close to SaronnoPassing close to Fino MornascoPassing close to ComoEntry into Swissontinue along: A2 / E35Exit 53At Bisio, At the roundabout, take the 4thexit.Arrive in Balerna. Continue along: Via SanGottardo.Destination: Balerna, Via San Gottardo 99a.

From Lucern, SwitzerlandTakeA2 / E35Head towards: Gotthard - Interlaken StansPassing close to AltdorfPassing close to AmstegPassing close to BellinzonaPassing close to LuganoTake the exit towards: Exit 53 ChiassoAt Bisio, At the roundabout, take the 1stexit. Continue along: Via San Gottardo.Arrive in Balerna. Continue along: Via SanGottardo.Destination: Balerna, Via San Gottardo 99a.


index [docs.rs-online.com] · 12.sa 14a.c 12.n 4 3/4'' 120mm strong, fine tips 4...

Documents