induction motor tests using matlab/simulink
TRANSCRIPT
![Page 1: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/1.jpg)
TITLEINDUCTION MOTOR TESTS USING MATLAB/SIMULINK
Term Paper PresentationEE – 5133
Dynamics of Power System and Apparatus
![Page 2: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/2.jpg)
Presented by:Girish Gupta
Roll no. 15082023Power System
M. Tech
Vivek KumarRoll no. 15082020Power System
M. Tech
Presented toDr. M K Verma,
Associate Professor,Department of Electrical
Engineering, IIT-BHU
![Page 3: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/3.jpg)
CONTENTS
ObjectivesDC Test of Induction MachineNo Load Test of Induction MachineBlocked Rotor Test of Induction Machine
Conclusion
![Page 4: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/4.jpg)
OBJECTIVEDevelopment of following simulation model of
induction motor test using Matlab/Simulink:- 1. DC Test 2. No Load Test 3. Blocked Rotor Test
To perform the above three tests using Simulink on a given induction motor model and compare the results with the parameters of the given induction motor.
![Page 5: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/5.jpg)
EQUIVALENT CIRCUIT OF INDUCTION MOTOR
• R1 - Stator Resistance• R2 - Rotor Resistance• X1 - Stator leakage reactance• X2 - Rotor leakage reactance• XM - Magnetizing reactance• Rc - Core Loss Resistance• S= slip
![Page 6: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/6.jpg)
1. DC TEST The dc test is performed to compute the stator winding
resistance R1.
A dc voltage is applied to the stator windings of an induction motor.
The resulting current flowing through the stator windings is a dc current; thus, no voltage is induced in the rotor circuit, and the motor reactance is zero.
The stator resistance is the only circuit parameter limiting current flow.
![Page 7: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/7.jpg)
EXPERIMENTAL SET UP OF DC TEST
![Page 8: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/8.jpg)
SIMULINK IMPLEMENTATION OF DC TEST
![Page 9: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/9.jpg)
CALCULATIONS OF DC TEST PARAMETERS
• VDC = Voltmeter Reading• IDC = Ammeter Reading• R1 = Stator Resistance
![Page 10: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/10.jpg)
ACTUAL PARAMETERS OF THE IM TAKEN IN SIMULATION
![Page 11: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/11.jpg)
RESULTS OF THE DC TEST WITH ERRORS
![Page 12: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/12.jpg)
The no-load test on an induction motor is conducted to measure the rotational losses of the motor and to determine some of its equivalent circuit parameters.
In this test, a rated, balanced ac voltage at a rated frequency is applied to the stator while it is running at no load.
During this input power, voltage, and phase currents are measured at the no-load condition.
For the simulation of no load, Mechanical Load torque is set to zero in the simulation
1. NO LOAD TEST
![Page 13: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/13.jpg)
EXPERIMENTAL SET UP OF NO LOAD TEST
![Page 14: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/14.jpg)
SIMULINK IMPLEMENTATION OF NO LOAD TEST
![Page 15: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/15.jpg)
CALCULATIONS OF NO LOAD TEST PARAMETERS
• V = Voltmeter Reading per phase• Iφ = Ammeter Reading per phase• P = Real Power per phase• Qa= Reactive Power per phase• ZNL = No load Impedance
![Page 16: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/16.jpg)
ACTUAL PARAMETERS OF THE IM TAKEN IN SIMULATION
![Page 17: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/17.jpg)
RESULTS OF THE NO LOAD TEST WITH ERRORS
![Page 18: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/18.jpg)
In this test, the rotor of the induction motor is blocked. A reduced voltage is applied to the stator terminals so
that the rated current flows through the stator windings. The input power, voltage and current are measured. The experimental setup of the blocked-rotor test is not
shown here since it is similar to that of the no-load test. In the Simulink model, to get the blocked rotor, the
inertia of the given induction machine is taken very high so as to keep the rotor speed to zero.
3. BLOCKED ROTOR TEST
![Page 19: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/19.jpg)
SIMULINK IMPLEMENTATION OF BLOCKED ROTOR TEST
![Page 20: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/20.jpg)
ACTUAL PARAMETERS OF THE IM TAKEN IN SIMULATION
![Page 21: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/21.jpg)
CALCULATIONS OF BLOCKED ROTOR TEST PARAMETERS
• Va = Voltmeter Reading per phase• Iφ = Ammeter Reading per phase• P = Real Power per phase• Qa= Reactive Power per phase• Zbr = Blocked rotor Impedance = Rbr + Xbr• X1’ - Stator leakage reactance• X2’ - Rotor leakage reactance
![Page 22: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/22.jpg)
RESULTS OF THE BLOCKED ROTOR TEST WITH ERRORS
![Page 23: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/23.jpg)
CONCLUSION In this paper, MATLAB simulation models of induction motor
tests are performed to obtain parameters of the per-phase equivalent circuit of three-phase induction motors.
Each Simulink/PSB model is explained in detail and compared with the corresponding experimental setup.
Circuit parameters obtained from simulation results are compared with those obtained from hardware experiments.
The error studies show that MATLAB paired with Simulink/PSB is a good simulation tool to model induction motor tests and to evaluate steady-state characteristics of the induction motor.
![Page 24: Induction Motor Tests Using MATLAB/Simulink](https://reader038.vdocuments.net/reader038/viewer/2022102511/58789e891a28ab42588b500b/html5/thumbnails/24.jpg)
Thank You.