IndustrialIndustrialhigh temperaturehigh temperature

insulationinsulation

IndustrialIndustrialhigh temperaturehigh temperature

insulationinsulation

Industrialhigh temperature

insulation

Pipe insulation without MB1000

Insulation layer with 100mm rock wool

Temperature outside: 76°C

Heat loss: 832W/m

832 W/m

600°C

Temperature outside: 46°CHeat loss: 501W/m

501 W/m

600°C

Pipe insulation with 100mm RockwoolPipe diameter 400mmTemperature inside 600°CTemperature outside 76°CHeat loss m/pipe: approx. 832W/m

Pipe insulation with 85mm Rockwool and 15mm MB1000 PipePipe diameter 400mmTemperature inside 600°CTemperature outside 46°Heat loss m/pipe: approx. 501W/m

Pipe insulation with MB1000

Insulation layer with 15mm MB1000 and 85mm rock wool

MB1000 is a microporous insulation material with an extremely low thermal conductivity and due to that, a very good insulation property.MB1000 insulates with 0,020W/mK @200°C more than 4 times better than any fibre insulation material. This thermal insulation material consists exclusively of inorganic materials, oxidically substances. The material is diffusion stable against humidity (water vapour). MB1000 is available with different covers like Aluminium foil, glass fleece or PE-Foil.Applications are in industrial furnace building, aluminium- and steel industry, power plants, heat treatment furnaces an lots of other applications where you have to insulate as good as possible.

Microporous boards MB1000 up to 1000°C

Insulation Board MB1000-57With 5mm insulation thickness, you can insulate from 1000°C down to 300°C. This board is especially suitably for a thin insulation on any round surface.

MB1000 Cloth Is a microporous board, pressed into a special high temperature resis- tant glass cloth. Due to this glass cloth, you can line your application very easy.

Microporous pipe Insulation MB1000 PipeMB1000 Pipe was developed to in order to make pipe insulation easy and fast with best economic values inthermal insulation and installation. You can very easy lay MB1000 Pipe around your pipe, and fix it.

Advantages at a glance

Temperature resistance up to 1000°C

Best possible Insulation 0,02W/mK @ 20°C up to 0,040W/mK @ 800°C

Energy saving:Less heat loss by using the same insulation thickness

Noncombustible:Building material class A1

Inorganic boards, no gas emission

Available as a hydrophobic board MBH1000Totally insensitive to water or humidity, as well on all cut edges!

Diameters are available up to 100mmInsulation thickness up to 50mm, depending of the diameter

MB1000-GVMB1000-GV is due the glass fleece cover on all sides a very stable microporous board. It can be handled and cut to size very easy. With a 50mm thickness, you can insulate from 1000°C down to 80°C. Contact us for your thermal profile!Insulation Board

MB1000-57With 5mm insulation thickness, you can insulate from 1000°C down to 300°C. This board is especially suitably for a thin insulation on any round surface.

MB1000 Cloth Is a microporous board, pressed into a special high temperature resis- tant glass cloth. Due to this glass cloth, you can line your application very easy.

Microporous pipe Insulation MB1000 PipeMB1000 Pipe was developed to in order to make pipe insulation easy and fast with best economic values inthermal insulation and installation. You can very easy lay MB1000 Pipe around your pipe, and fix it.

Microporous half pipes made of MB1000 Are covered with a glass cloth, alumi- num floil or with a glass fleece. For the perfect fit we have a tongue and groove joint in longitudinal direction and offer the same for the front/end side of the half pipes.Half pipes are avail- able up to 100mm diameter. Insulation thickness up to 50mm, depen- ding of the diameter.

MB1000 Is as well available without any cover.

As well in hydrophobic version available

contact us, we do the thermal profil for your application

MBH 1000 Is a hydrophobic microporous board, which can be used in direct contact with water/condensate. The temperature resistance is up to 1000°C and the insulation is as well best possible with 0,040W/mK @ 800°C.

Industrialhigh temperature

insulation

Industrialhigh temperature

insulation

Begin of 2013 Becker Insulation GmbH has been established in the north of Germany. With our efficient team, we produce insulation material according to your requests within a very short time.

We offer:Microporous insulation materials up to 1000°C application temperature, textile products like gaskets, tapes and cloth up to 1300°C application temperature, AES and RCF fibre products like paper, boards, blankets, modules, gaskets and high temperature fibre products up to 1800°C.

From Hamburg and Münster: A 1 until Osnabrück North

From Hannover:

A2 till Bad Oeynhausen and go on at A30 towards Osnabrück North

From Osnabrück � B68 until Bramsche � B218 until Schwagstorf �

B214 until Fürstenau � until Handrup � L60 in direction of Berge �

L60. Approx. 200m after Ohtermersch you will find the gateway to our

company on the left hand side.

From Amsterdam: E30 until Oldenzaal and further until De Lutte, Motor-

way cross Schüttdorf A30 change on A31 in direction of Lingen.

From Bochum: follow A31 towards Lingen.

From exit Lingen follow B213 towards Lingen on B214 towards Fürstenau �

B402 until Handrup and further in direction of Berge.

Approx 200m after Ohrtermersch you will find the gateway to our

company on the left hand side.

becker insulation GmbHLingener Straße 6 · 49626 Bippen, Gemany

info@becker-insulation.de · www.becker-insulation.de

About us •••

Here you can find us •••

Netherlands

BremenEmden

Lingen

BIPPEN

Hamburg

Hannover

KasselMünster

OsnabrückAmsterdam

Bochum

1

3030307

7

2

2

1

68214

28

31

31

E 30

1