industrial product guide3.imimg.com/data3/vr/qe/my-2/scapa-industrial-product... · 2020. 1....

Industrial Product Guide

World class, inspired, market driven team, focused on optimising customer and shareholder value through responsible, agile delivery of specialist tape solutions.

Scapa Group

Scapa’s expertise lies in its ability to link market needs with specialist tape solutions. At Scapa, we base our approach on a deep understanding of our core industrial markets.

This understanding allows us to anticipate tomorrow’s customer needs. We work closely with leading global partners in our target markets, which enable us to develop specialised bonding solutions for industry, trade and end-users.

Our range of specialist adhesive tapes, foams and films are used extensively in a wide range of industrial processes, where the tape is used either as an integral component, a semi-permanent or a temporary solution.

Selection of correct specialist tape can improve both efficiency and cost, by reducing complaints and rejects in manufacturing processes, particularly where bending, drilling, punching or profiling operations are involved.

Our market focused expertise can ensure the right solution is achieved for any specific business need.

Contents

Product Information Page

Single sided tapesAluminium 1Cloth - coated 2 - 3Cloth - uncoated 4 - 6Silicone rubber coated cloth 6 Cellulose 7Polyurethane 7Paper 8 - 9Polyester 10 - 11Polyethylene 12 - 13Polyimide 14Polypropylene 14 PVC 15 - 16Self-amalgamating 17Putties 17Single Sided Foam 18 - 20Double sided tapesDouble Sided Foam 21 - 22AFT (Acrylic Foam Tapes) 23 - 24Cloth 27Polyester 28 PVC 29Other 30Tissue 31Pressure sensitive adhesivesTransfer Adhesives 25 - 26Heat Seal 32

Markets Page

Building & Construction 34 - 36Electro Technical 36Electronics 37Entertainment 37Flooring 37 - 38Furniture 38Military 38Packaging 38Point of Sale 39Powder Coating 39Signage 39 - 40Surface Protection 40Transportation 40 - 41White Goods 42

Aluminium

Product CharacteristicsThickness

mm

Peel Adhesion

N/cm

Tensile Strength

N/cm

Operating TemperatureST = Short term

Applications Approvals

330Linerless aluminium foil (75 microns) with acrylic

adhesive. Good chemical resistance.0.13 4

35

-35°C to +150°C ST +180°C

Double glazing, galvanizing, spray painting, sandblasting and powder

finishing.-

330DLinerless aluminium foil (75 microns) with acrylic adhesive. Higher tack and adhesion than 330.

Good chemical resistance.0.14 4.5

-35ºC to +105ºC ST +125ºC

Protection in galvanizing, spray painting. Repair of aluminium structures, splicing

to thin aluminium sheeting.

Comply with Ministry of Defence (MOD)

standard DEF STAN 75-5 Issue 1.

330R Linered version of 330. 0.13 4-35ºC to +150ºC

ST +180ºCAircraft window protection during

cleaning and painting.-

331ELinered aluminium foil (25 microns) with acrylic

adhesive. Easy to tear.0.065 10 13.5

-20ºC to +110ºCClosing rigid air duct insulation, heat

reflector.

333Linered aluminium foil (36 microns) with acrylic

adhesive. Easy to tear. Fire rated M1.0.07 4.5 18

UL classified for surface burning characteristics (according to UL723) - file number: BVYS.

R8780335Linered aluminium foil (46 microns) with acrylic

adhesive. Easy to tear. Fire rated M1, F00.08 5

25


adhesive. Easy to tear. High temperature resistance.

0.11 6-20ºC to +155ºC ST +200ºC (1h)

Insulation of heater casings for home heating insulation, high pressure pipe insulation, heat deflector. Repair and

protection of automotive undercarriages.

-


adhesive. Easy to tear.0.054 6.8 15

-20ºC to +110ºC

Closing rigid air ducts and shafts.

UL classified for surface burning characteristics (according to UL723) - file number: BVYS.

R8780. Fire rated B1 according to DIN

4102-1

343Linerless aluminium foil (38 microns) with acrylic

adhesive. Easy to tear.0.065 4.5 18

Double glazing, heat deflector, closing rigid air ducts, TV degaussing.

-

874Linered aluminium/glass scrim reinforced with acrylic adhesive. Good mechanical resistance.

0.15 N/A 10Sealing and finishing insulation ducts. Maintains neat appearance of ducting.

1

Coated cloth with rubber resin adhesive

Product Characteristics Colour Thicknessmm

Peel Adhesion

N/cm

Tensile Strength

N/cm

Operating Temperature


1200Premium performance. Very strong

and highly conformable, good abrasion resistance and tack.

W, BK, BL, Y, GR, R, BN, GY

0.28 3.7 100 -10°C to +70°C

Protection during sandblasting, double glazing edge protection, securing of flexo plates, carpet

joining.

-

3000PRS10 PRO

Heat resistant, strong and durable, good abrasion resistance and tack.

Coated with a thermosetting adhesive.SIL 0.33 7 80 -40°C to +110°C Sealing gas closure plates.

British GasPRS10 - Issue 2

3101Premium performance. Conformable, good abrasion and corrosion resistance, strong,

water resistant.

W, BK, SIL, GY, R, Y, BL, O-GR

0.30 4 78 -20°C to +80°CHeavy duty packaging, carpet

joining, book and spine binding, colour coding and identification.

DEF STAN 81-25/4

(certain colours)

3105

Good corrosion and abrasion resistance. Good low temperature performance. Very strong and robust. Low sulphur, chlorine

and halogen.

BK/W staked colour

0.29 5 63 -30°C to +70°C

Temporary masking, sealing, joining, supporting and holding on nuclear fabrications during

construction.-

3120Mid grade. Strong, highly flexible and

conformable. Peels off easily after use.Good temperature performance.

W, BK, SIL, R, Y, BL,

GR0.27 4 48 -20°C to +80°C

Duct sealing, covering joints in hot air insulating material, double glazing, masking, carpet joining

and edging, holding and jointing of cables and wires.

3122Good corrosion and abrasion resistance.

Low sulphur and halogen content. Very strong and robust.

BK, Y 0.28 5 63 -30°C to +70°CHeavy duty masking, surface

protection. Sealing ammunition cases and temporary repairs.

DEF STAN 81-25/4

2

Colour KeyAM = Amber BK-SM = Black Smooth CR = Cream NAT = Natural R = Red Y = YellowBE = Beige BL = Blue FL-O = Fluorescent Orange O = Orange SIL = Silver Y-BK = Yellow/BlackBF = Buff BN = Brown GR = Green O-GR = Olive Green TL = Translucent Y-GN = Yellow/GreenBK = Black B-Nat = Bleached Natural GY = Grey P = Purple V = VioletBK-EM = Black Embossed CL = Clear J-GR = Jade Green PR-W = Printed White W = White

3

Coated cloth with rubber resin adhesive


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

3130Matt gaffer tape to prevent reflection

of light. Strong and conformable, hand tearable, clean peel.

BK, W, BL, R, Y, GR + Chromakey BL & GR

0.29

4

55 0°C to +60°CTemporary fixing and holding of wires and cables to

floors and walls, masking of stage equipment, colour coding and identification.

3159Economy performance. Strong and

conformable. Hand tearable.

SIL, BK, W

0.14

35 -10°C to +75°C

Sealing, bundling, short term masking and protection. General purpose applications.

3160Economy performance. Excellent adhesion

and strength. Flexible and conformable. Hand tearable.

0.15 5Short term masking and protecting, double glazed unit

and duct sealing, carpet joining and edging.

3162Excellent adhesion and strength. Flexible

and conformable. Hand tearable. 0.18 6

Asbestos removal, double glazed unit and duct sealing, carpet joining and edging.

3163Mid grade. Excellent tack and adhesion. Good strength. Flexible and conformable.

Hand tearable.SIL, BK 0.23 5 40 -20°C to +75°C

Duct and double glazed unit sealing, carpet joining and edging, asbestos removal.

3183

High tack and ultimate adhesion. Hand tearable. Excellent abrasion resistance and

heat resistance. Coated with a thermosetting adhesive.

SIL 0.32

6

75 -40°C to +110°C Duct and insulation material sealing.

T3601Fire retardant. Very light and conformable.Approvals: M1 and FAR 25.853 fire rated.

PR-W, 0.22 35 0°C to +70°CTemporary joining of fireproof panels during

shipbuilding, reinforcing in construction, wire harness holding, sealing partitions and joints.


Uncoated cloth with rubber resin adhesive


Peel Adhesion

N/cm

Tensile Strength

N/cm



1190Cotton cloth, abrasion resistant, good

initial tack and ultimate adhesion.NAT 0.28 3.5 90 0°C to +90°C

Production of tube ends, metal sheets, rubber and plastic hoses,

reinforcement of leather goods and clothing.

-

1304

Acetate cloth. Thermal Class A. Resistant to solvents and varnishes. Excellent

conformability. Coated with a thermosetting adhesive.

BK, W 0.24 4.8 55 -5°C to +105°CProtection, insulation, coil winding,

core starting, end tabbing, securing copper sheets.

1503B

Glass cloth. Thermal Class B. High mechanical strength. Resistant to solvents

and varnishes in dry applications. Coated with a thermosetting adhesive.

W

0.16 4 300 0°C to +130°C

Fixing wires prior to impregnation, securing splicing cables and

wire harnesses, outer protective insulating wraps for bobbins, coils,

dry transformers.

UL recognised component in insulating

devices and ma-terials according

to UL510 file number OANZ2.

E103655.

1690 Rayon cloth. Strong, tearable by hand. 0.3 3 80 0°C to +90°C

Protection against friction and knocks to fragile items, protection against vibration, closure of metal

boxes, animal bandages.

-

3302Cotton cloth. Corrosion and abrasion

resistant. Good initial tack and ultimate adhesion. Strong and durable.

BK, W, BE, O-GR,

R, Y0.26 2.8 70 -10°C to +60°C

Sealing and identification, floor marking on stages and

film sets, colour coding and protection.

DEF STAN 75-2 (certain colours)

4

5

Uncoated cloth with rubber resin adhesive


PeelAdhesion

N/cm

Tensile Strength

N/cm



3362Unbleached cotton. Corrosion and

abrasion resistant. High initial tack and adhesion.

NAT 0.29 3 70 -10°C to +60°C

Masking of cats eyes, grids and manhole covers during road

resurfacing work, protection of polished surfaces and machine

parts against corrosion. -

3369T1 (90°C) temp. resistance. Good anti-rattle and NVH properties. Halogen free.

BK 0.28 2.4

80

0°C to +90°CRayon tape for wire harness wrapping in the automotive

industry.

3370Rayon cloth. Strong, corrosion and

abrasion resistant. Excellent initial tack and ultimate adhesion.

NAT, BK, W 0.24 3 -10°C to +70°C

Wrapping, wire harnessing, protection of polished surfaces and

machine parts against corrosion and damage.

DEF STAN 75-2(Certain colours)

3372Uncoated cotton. Corrosion and abrasion

resistant. High tack. Log format only.NAT 0.26 2.8 90 -10°C to +60°C

General protection of polished surfaces against corrosion and

damage. General purpose bundling.

-



Peel Adhesion

N/cm

Tensile Strength

N/cm



1502F

Glass cloth. Thermal Class F. High mechanical strength. Resistant to solvents

and varnishes.W 0.18 2.7 300 -30°C to +155°C

Fixing wires prior to impregnation, securing, splicing cables and

wire harnesses, outer protective insulating wraps for bobbins, coils,

dry transformers.




E103655.

6

Uncoated cloth with acrylic adhesive

Uncoated cloth with silicone adhesive

Silicone rubber coated cloth

1504H

Glass Cloth. Thermal Class H. High mechanical strength, resistant to solvents

and varnishes, fire retardant.W 0.17 3.8 300 -30°C to +180°C

Fixing and reinforcing coils and wires, securing, splicing cables

and wire harnesses, outer protective insulating wraps for

bobbins, coils, dry transformers.




E103655.

2420RollerMate®

Provides anti-adherent surface.BK-EM 0.6

2 - -10°C to +100°C

Roll covering in web processing applications to prevent build up of adhesive, ink and other deposits.

-

2421RollerMate®

Provides anti-slip surface.BK-SM 0.4

Roll covering in web processing applications to provide anti-slip surface and to facilitate material

movement.

Cellulose with rubber resin adhesive (unless otherwise specified)

7


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

1100 High tack and clarity. Anti-static. Hand tearable. CL 0.047 2.536 -15°C to +100°C

General splicing, packaging and sealing applications.

1112 High tack. Anti-static. Hand tearable.

R

0.057 3 General splicing applications.

1129Optically transparent and photographically opaque.

Hand tearable. Anti-static.0.045

2.2

40

-10°C to +100°C ST +130°C

Protects orthochromatic films and printing plates during light exposure.

1140 Hand tearable. Anti-static. BL 0.045 36Stripping up lithographic positive films, does not affect the transmission of light through

the tape.

1919Hand tearable. Invisible once applied

(mending tape). Acrylic adhesive.TL 0.054 2.6 35 -15°C to +100°C

General splicing, packaging and sealing applications.


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

2604Resistant to solvents and oils. Excellent

conformability to irregular surfaces.CL, BK 0.356 6 - -30ºC to +160ºC

Erosion protection on aircraft leading edges, propellers, de-icer systems, helecopter rotors.

Polyurethane


8

Paper with rubber resin adhesive (unless otherwise specified)


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

2595 Silicone adhesive. Removes cleanly after use. BF 0.15 2.6 40 -40°C to +180°C ST +200°C

Surface protection of aluminium, chemically etched steel, passivated cadmium,

magnesium, copper.

9060CClean removal at room temperature. Resistant to

mild chemicals, lacquers, solvents and water.

NAT

0.3 1.4 25

0°C to +60°C

Professional painters masking tape for indoor use. Suitable for brush and spray air drying.

9060S 0.11 2.4 30Professional painters and plasterers masking

tape for indoor use.

9064 Very high tack. Solvent free, Kraft paper tape. 0.1 5.5 45 0°C to +50°CLight to medium domestic packaging and

sealing applications.

9080SClean and easy removal. Resistant to chemicals,

lacquers and solvents.0.11

2.5

30 0°C to +80°CAutomotive masking tape for indoor masking

applications.

9100SModerate tack, good peel adhesion. Clean

removal. Resistant to chemicals, lacquers and solvents.

0.13 350°C to +100°C

ST +120°CPremium automotive masking tape with oven

baking resistance.

9130SGood peel adhesion and shear resistance.

Resistant to chemicals, lacquers and solvents.0.17 3 40 0°C to +150°C

Premium masking tape for aircraft, buses, ships and trucks.

9152Excellent peel adhesion. Resistant to chemicals, lacquers and solvents. Clean and easy removal.

BK, W, Y 0.14 3.5 32 0°C to +80°CAutomotive masking, binding and wrapping tape with short term oven baking resistance.

Suitable for book and document binding.

9

Paper with rubber resin adhesive (unless otherwise specified)


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

9170Thermal Class A. Impregnated and varnished for

improved resistance to moisture recovery.Chamois 0.18 4.5 4 up to +105°C

Outer protective insulating wraps for small bobbins, coils, transformers, small motors. Fixing and securing non-adhesive insulating

paper between layers.

9830Good adhesion to all substrates. High abrasion

and puncture resistance.BE 0.39 8 - up to +80°C

Protection and masking during sandblasting, shot blasting, protection against abrasion, suitable as spacer between glass window

panels, protection of glass, granite, marble, metals.

K132Excellent temperature resistance under stress.

Features a thermosetting acrylic adhesive.

W

0.315 7 54

up to +200°C ST +250°C

Butt splicing during PVC flooring manufacture.K136 0.31 9 37

K137Paper reinforced with a scrim. Excellent temperature resistance under stress.

Features a thermosetting acrylic adhesive.0.32 8 175


10

Polyester with silicone adhesive


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

160123 microns polyester film. Residue free removal

up to 180°C (20min). Blue colour enables easy splice identification.

BL 0.068 2.8 30-40ºC to +130ºC

ST 180ºC (20 min)High temperature masking in powder coating applications. Splicing applications, particularly siliconised surfaces such as release papers,

end tabbing.1602 Translucent version of 1601. TL 0.06 3.2

40-50ºC to +130ºC

ST 180ºC (20 min)1650

23 microns polyester film. Residue free removal up to 180°C (20min).

Red colour enables easy splice identification. Very thin tape.

R 0.048 2.8

Splicing applications, particularly siliconised surfaces such as release papers and films.

C52423 microns polyester film. High adhesive coat

weight makes it ideal for rough surfaces. Green colour enables easy splice identification. GR

0.1 3.5 44 -50ºC to +180ºC

R59250 microns polyester film. Residue free removal

up to 200°C (20min).0.083 4 88


High temperature masking in powder coating applications.

R612 75 microns polyester film. Removes cleanly.

TL

0.11 4.4

--50ºC to +140ºC

ST +160ºCTemporary masking and protective

applications.R613 50 microns polyester film. Removes cleanly. 0.083 3.8


Peel Adhesion

N/cm

Tensile Strength

N/cm



1613Thermal Class B. Outstanding dielectric

stength. High tack. Excellent flagging and solvent resistance. Printable carrier.

GY 0.075 1 35 -40ºC to +130ºCCapacitor wrapping, coil winding

protection and insulation.

UL recognised component in

insulating devices and materials according to

UL510, file number OANZ2. E103655.

1695Good shear resistance. High chemical,

moisture and solvent resistance.SIL 0.045 2.6 50 -15ºC to +130ºC

Splicing and sealing applications, double glazed sealing.

-8705B

Outstanding dielectric strength. Good peel for checking paint and varnishes. Printable.

TL

0.055 4.3 35 -40ºC to +130ºCCoil winding, protection and

insulation, fixing capacitors plastic film. Paint and varnish test.

K125Exceptional grab to most surfaces.

Conformable, non tearable and tensile resistant carrier.

0.084 10.5 - -40ºC to +100ºCFlying splice of various materials namely in flooring production.


Peel Adhesion

N/cm

Tensile Strength

N/cm



1621 Moderate tack. Easy unwind. CL 0.045 1.8 40 -15ºC to +120ºCGeneral purpose packaging,

sealing and bundling.-

C574NS Residue free removal up to 170°C (20min). GR 0.051 2.2 44-15ºC to +130ºC

ST+170ºC (20 min)Masking application when use of

silicone adhesive is banned.

11

Polyester with rubber adhesive

Polyester with acrylic adhesive


Peel Adhesion

N/cm

Tensile Strength

N/cm



1401Rubber resin adhesive. Flexible, even at sub-zero temperatures. Resistant to

moisture and chemicals.CL 0.1 3 13.5 0ºC to +60ºC

Economical tape for the airtight and moisture proof sealing of biscuit and confectionary tins, bottles,

jars, etc.

-

1433Acrylic adhesive. Excellent UV resistance.

Good oil, salt water and plasticiser resistance.

TL/GR 0.15 3 24 -15ºC to +70ºC

Splicing and repairing poly tunnel green houses, PE films and sheets, thermal screens,

reinforcement of horticultural PE or PVC structures.

2500Acrylic adhesive. Very good adhesion to

rough and difficult surfaces such as wood and stone.

GR 0.82 2 15 -15ºC to +60ºC

Masking of rough substrates such as stone, concrete, brick etc. during painting or projection of

cement or plaster.

2900 Non adhesive.R/W

Striped0.04 - - 0ºC to +50ºC

Hazard warning and safety marking, identification of potential

danger areas.

2901Flexible, even at sub-zero temperatures.

Resistant to moisture and chemicals. Halogen free.

CL, BK, W, R, Y, GY,

BL0.15 3.5 18

-15ºC to +60ºC

Electrical insulation. Used in pressurised telecommunication

resin injected splices. Identification, packaging.

Complies with UK Ministry of

Defence (MOD) standard DEF STAN 75-1

issue 4.

2907Flexible, even at sub-zero temperatures.

Resistant to moisture and chemicals.BK, W 0.205 3.3 25.5

Pipeline protection against corrosion and mechanical damage.

-

2994Rubber resin adhesive. Suitable for

external applications for up to 6 months.BK 0.123 1.2 20

Outdoor protection of metals and other materials during transportation and storage.

12

Polyethylene


13


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

1417 Medium tack acrylic adhesive. W 0.12 0.65

- -15ºC to +60ºC

Outdoor protection of metals and other materials during transportation and storage.

2347

High tack acrylic adhesive.

CL 0.093 2.3Surface protection of rugs and fitted carpets,

back of the mirror protection, removal of broken windscreens.

10515 BL 0.06 1.2Surface protection of metals and laminated

products.

10748 CL 0.093 2.3 Surface protection of rugs and fitted carpets.

Polyethylene



Peel Adhesion

N/cm

Tensile Strength

N/cm



1801Thermal Class H. Resistant to most alcohols, esters, ketones. Resistant to chemical attack. Flame retardant.

Removes cleanly.

AM0.067 2.8 44


Masking of PCB gold fingers and protection of plug-in connectors / switches during wave soldering, bundling and fixing components.

Electrical insulation of coil, transformers, wires and cables.

UL recognised component in

insulating devices and materials according to

UL510, file number OANZ2. E103655.

C556 0.069 2.7 52.8 -50ºC to +180ºC -

14

Polyimide

Polypropylene


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

875Aluminised PP. Hand tearable. High tack acrylic

adhesive. Good ageing and UV resistance. Good vapour barrier.

SIL 0.06 7 30 -40ºC to +110ºCSplicing and repairing of thin reflective insulation

panels.

1201Good chemical and plasticiser resistance.

acrylic adhesive.CL 0.047

240

-15ºC to +110ºC

Overlay for instructions, leaflets etc, laminating film of label web for high speed die cutting.

1250 Crystal clear transparency. Acrylic adhesive. Ultra CL 0.045 28 Packaging and sealing applications.

1252 Hot-melt rubber resin adhesive.BF, CL, W 0.047

5.5 42.5 -0ºC to +50ºCMedium to light packaging applications.

1253 Acrylic adhesive. Low-noise unwinding. 2.6 42 -0ºC to +60ºC

7019Filament reinforcement tape with hot-melt

rubber resin adhesive.CL 0.13 7 250 -0ºC to +50ºC

Medium to heavy duty packaging and sealing applications.

15

PVC film with rubber resin adhesive


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

2210Moderate tack. Moisture and chemical

resistant. Printable.BK, BL, GR, R, Y

0.051 248

-10ºC to +60ºC

Packaging and colour coding applications.

2240

Low tack. Printable.

BL tinted 0.052

0.4Masking and protective applications of metals,

plastic, wood panels. 2242 CL 0.048 44

2244 R tinted 0.052 48

2254Heavy duty. High tack. Moisture and

chemical resistant. Printable.CL 0.085

2

80High performance packaging tape. Suitable for

heavy items.

2258Optically transparent and photographically

opaque.R tinted 0.057 60

Edging, masking, stripping and splicing applications. Stripping up lithographic negative films prior to plate

making.

2260Resistant to UV light. Long ageing

properties, retaining its clarity over a long period.

CL 0.05 2.6 44up to +60ºC ST +70ºC

Suitable for outdoor applications, protecting labels and nameplates. Resistant to plasticisers.

2290Easy unwind, high tack, low noise.

Moisture and chemical resistant. Printable.BF, CL, W 0.051 2 48 up to +60ºC

Medium to light bundling and packaging applications.


16

Soft PVC with rubber resin adhesive


Peel Adhesion

N/cm

Tensile Strength

N/cm



2701General purpose self-extinguishing soft

PVC tape.

BK, W, GY, R, BL, Y, GR, Y-GR

0.13

1.5 18 -Cable bundling, colour coding, duct sealing, general purpose splicing, primary electrical

insualtion up to 600 volts.BS 3924

2702Premium quality self-extinguishing soft

PVC tape.

BK, W, GY, R, BL, Y, GR, BR, O, V, TL,

Y-GR 1.8

25 0ºC to +90ºCElectrical insulation, protection for low

and medium voltage cable splices, colour coding, cable wrapping.

IMQ, VDE, ÖVE, BS 3924.

EN 60454-3-1-5 / F-PVCP/90.

2705

Premium quality, professional grade, self-extinguishing tape. Provides higher voltage break-down and mechanical

protection than Scapa 6022.

BK, W, GY, R, BL

0.18 350ºC to +90ºC ST +105ºC

Electrical insulation, harnessing, protection for low and medium voltage cable splices,

engineered for telecom and electricity boards.

IMQ, VDE, BS 3924

EN 60454-3-1-5 / F-PVCP/90.

2708Heavy duty premium non corrosive self-extinguishing tape. Flexible and

abrasion resistant.BK 0.25

1.5

44 up to +70ºC

Heavy duty, anti-corrosive protection tape for ducts, pipelines and tubes, electrical insulation, protection for low and medium

voltage cable splices, engineered for telecom and electricity boards.

-2721 Premium quality. Excellent resistance to abrasion, corrosion and moisture.

Suitable for indoor and protected outdoor environments.

BK, Y, W, R, BL, GR

0.16

25

-

Line marking, flooring, colour coding.

2724 Y/BK, W/RHazard warning and safety tape. Used for

identification of potential danger areas.

2745 Self-extinguishing. Good conformability. BK 0.13 up to +80ºCHarnessing, protection of drink pythons, suitable for wrapping applications where

automatic taping is required.

6022

Premium quality self-extinguishing soft PVC tape. Provides higher voltage

break-down and mechanical protection than Scapa 2702.

BK, W, GY, R, BL, Y,

GR, BR, O, V, Y-GR

0.15 1.8 30 0ºC to +90ºCElectrical insulation, harnessing, protection for low and medium voltage cable splices,

colour coding.

IMQ, VDE, ÖVE, CEBEC,

SEMKO, NEMKO, DEMKO, BS 3924

EN 60454-3-1-5 / F-PVCP/90.


Tensile Strength

MPa

Dielectric StrengthkV/mm



2501

PIB self-amalgamating tape.

BK

0.5

2

42

-40ºC to +90ºC

Jointing, repairing and protection of power and distribution cables up to 46kV. Protection, waterproofing

and insulation of electrical components, DIY repairs.

-

2504

0.75

2517 EPR self-amalgamating insulation tape. 3 -40ºC to +100ºC

Jointing and repairing solid electrical power cables up to

69 kV. Insulation, waterproofing and protection of electrical

components.

2525Semi-conducting EPR self-amalgamating tape. Excellent resistance to water and

ozone. UV resistant.1.5 N/A


Ensures continuity of conductor and core screens at polymeric

and elastomeric insulated cables up to 69 kV. Smoothes electrical stress, reduces discharges and interference to local radio and

telephone communication.

EDF HN 26-S-04, UTE C

33-011.

17

Self amalgamating

Putties


Tensile Strength

MPa

Dielectric StrengthkV/mm


Applications

30Electrical sealing putty. Resistant to water

and ozone. Suitable for hot climates.BK 3.2 0.1 23 -30ºC to +80ºC

Preventing leaks of resin during injection in low and medium voltage taped joints, waterproofing and

reconstitution of insulation.


18

Single sided foams


Seal Type

Force to Compress

N/cm²



3009Soft PVC foam with removable PET liner

on the non-adhesive side. UV light resistant.

BK 6 Water 2.3

-30ºC to +70ºC

Sealing glass walls in chiller cabinets, sealing between composite panels,

partition wall construction.

-3024

Medium soft PVC foam with fixed PET liner on the non-adhesive side. UV light

resistant.W 3.3 Weather 4.6

Reduction of heat transfer to PE film in horticultural cloches.

3097

Soft PVC foam. UV light resistant.

GY3; 4.5; 6;

9; 12

Water 1.5Cushioning, gap filling of irregular

surfaces, anti slip mounting.3099 BK

3; 4.5; 6; 7.5; 9; 12;

15

Approved for full contact with Dow Corning® silicone

sealant.

3124

Soft PVC foam with fixed PET liner on the non-adhesive side. Very good foam

recovery. UV light resistant.

W 4; 5

Air & dust

1.1 (50%)Cushioning, gap filling, make or break

sealing.

-

3127 GY 3; 4

3128 BN 4

3129 BK 5

3154Medium soft PVC foam with removable paper liner on the non-adhesive side.

Excellent foam recovery. UV light resistant. W

3; 4.5; 6; 12

1.7 (50%)

Cushioning, gap filling, anti-slip mounting.3204

Soft PVC foam. UV light resistant.

3; 4.5

Water 2.9Fire rated DIN

4102 B2.3209 BK 3; 4.5; 6;

3224Soft PVC foam with fixed PET liner on the

non-adhesive side. UV light resistant.W 4.5 Weather 3

Cushioning, gap filling, make or break sealing.

-

NOTE: Compression required to effect seal: Water and Weather 30%. Air, Dust and Draft 50%.

19

Single sided foams


Seal Type

Force to Compress

N/cm²



3239Medium soft PVC foam with fixed PET liner on the non-adhesive side. UV light

resistant.BK 2.5 Weather 4.4

-30ºC to +70ºC

Cushioning, cabinet door seals, forming thermal break in insulated

cladding panel systems.-

3257Medium soft PVC foam with removable paper release liner on the non-adhesive

side. UV light resistant.GY

1.5; 3; 4.5; 6

Water

2.8Cushioning, replacing chloroprene

foam seals, gap filling, anti slip mounting.

Fire rated DIN 4102 B2

3259Medium soft PVC foam with removable paper release liner on the non-adhesive

side. UV light resistant.

BK

1.5; 3; 4.5; 6; 7.5; 9;

10.5; 12; 15

Fire rated DIN 4102 B2, Approved for full

contact with Dow Corning® silicone

sealants.

3279

Medium soft PVC foam with removable paper release liner on the non-adhesive

side. High service temperature resistance. UV light resistant.

Enquire 3 -30ºC to +100ºCCushioning, replacing chloroprene

foam seals, gap filling, anti slip mounting.

-3308Medium soft PVC foam with removable paper release liner on the non-adhesive

side. UV light resistant.BN 3 4.5 -30ºC to +80ºC

Wood frame glazing, gap filling, anti slip mounting.

3492

Hard PVC foam with removable PET film liner on the non-adhesive side. Specially formulated low tack adhesive. UV light

resistant.

GR 3; 4.5 10 -30ºC to +70ºCSeparating and protecting glass during sealed unit assembly and

transportation.



20

Single sided foams


Seal Type

Force to Compress

N/cm²



3507 Hard PVC foam with removable paper release liner on the non-adhesive

side. UV light resistant.

GY0.8; 1.5; 2.5; 3; 4.5; 6 Water 6.3

-30ºC to +70ºC

Heavy duty cushioning, higher load bearing applications, anti

slip mounting.

Approved for full contact with Dow Corning® silicone

sealant.3509

BK

0.8; 1.5; 3; 4.5; 6

3589Fire retardant hard PVC foam with

fixed PET film liner on the non-adhesive side. UV light resistant.

3 Weather 5For make or break sealing,

suspended floors and ceilings.Fire rated DIN 4102 B2,

M1, M2.

3594 Fire retardant hard PVC foam with removable paper release liner on the non-adhesive side. UV light resistant.

W 3; 4.5Water 5.5

Cushioning, gap filling, anti slip mounting, HVAC flange sealing.

Fire rated BS476 pt.7, class 1, UK Building Reg. Class 0. Approved for full contact with Dow Corning® silicone

sealants.

3599 BK 3 Fire rated M1.

3824Hard PE foam with fixed PE liner on

the non-adhesive side.

W1; 2; 3;

4; 6Weather 3.0 (20%) -30ºC to +80ºC

Cushioning, gap filling, anti slip mounting.

-

3829 BK2; 3; 4; 5;

6; 10


21

Double sided foams

Product Characteristics Colour Thicknessmm Adhesive

PeelAdhesion

N/cm



5004Strong PE foam. Tough and resilient,

thicker spacer and bonding tape.W

3

Acrylic

22

-40ºC to +70ºC

Bonding of engineered plastics, multi skinned

rooflights.

-5164Hard and resilient PVC foam. Forms

waterseal at 20% compression. Very good weathering properties.

0.8; 1.5; 3; 4.5

10

Spacer tape, automotive mirror mounting, glazing.

5169

BK

0.8; 1.5; 2; 3; 4.5; 6

Spacer tape, glazing, profile bonding and sealing.

5179Medium hard and resilient PVC foam. Forms waterseal at 30% compression.

Very good weathering properties.

1.5; 3; 4.5; 6.5

12 Designed for security glazing and low rise commercial

glazing systems. Spacer and dampener in commercial

vehicle assembly.

BBA Cert. 99/3612. Approved for full contact

with Dow Corning® silicone sealants.5189

Medium hard PVC foam. Forms waterseal at 30% compression. High tack adhesive

system.3; 6.5 10

5404Strong PE foam. Tough and resilient

designed for medium weight loadings.

W1; 2

21

Bonding of plastic profiles (cable management, conduit,

decorative trims), POS bonding.

Institüt für Fenstertechnik, Rosenheim, Germany – for

mounting Georgian bars on windows.5409

BK5429

Strong PE foam. Tough and resilient designed for medium weight loadings.

Product with moisture stable paper liner.1

Bonding of aluminium spacer profiles to glass.

-

5434PE foam designed for lighter weight,

bonding and fixing applications. Not UV light resistant.

WRubber resin

17Lighter weight POS / display

mounting.


22

Double sided foams

Product Characteristics Colour Thicknessmm Adhesive

Peel Adhesion

N/cm



5454PE foam designed for medium weight

loads. Not UV light resistant.W

2; 3Rubber resin

10 -40ºC to +70ºCMounting nameplates, hooks

and dispensers. Tamper evident bonding tape.

-

5464High performance PE foam. High static shear load bonding. UV light and heat

resistant.

1; 2

Acrylic 18 -40ºC to +100ºC

Mirror mounting foam tape, bonding mirrors in furniture

systems, POS / display bonding.

Cert. LGA - German Furniture Institute.

Approved for photovoltaic panel

framing according to IEC 61215:2005.

5469 BK 1

5474 High performance PE foam. High static shear load bonding. Not UV light resistant.

W 1; 1.5; 2 Rubber resin

20 -40ºC to +70ºCMirror mounting, bonding

mirrors in furniture systems, POS / display bonding.

FIRA accredited. Cert. LGA - German

Furniture Institute.

5479

BK

1 -

5499High strength PE foam. Very good

mechanical properties.0.5; 0.6;

0.8Acrylic 18 -40ºC to +100ºC

Automotive emblem mounting. Headlining bonding.

Cert. LGA - German Furniture Institute.

Approved for photovoltaic panel

framing according to IEC 61215:2005.

5574High performance PE foam.

Very high static shear load bonding.Not UV light resistant.

W

0.8

Rubber resin

45 -40ºC to +70ºCPlastic retail shelf trim bonding, self-adhesive wire / cable clip

bonding.-

5589Very high strength PE foam.

Excellent mechanical properties.

BK Acrylic

10 -40ºC to +120ºCAutomotive emblem bonding,

lens grinding pads.

Fire rated M1, F1, WSK-M3G184-A1, WSK-M11P51-A

(Ford).

5599Thin, very high strength PE foam. UV light

and petrochemical resistant.0.55 18 -40ºC to +100ºC

Automotive emblem badge and decal bonding.

-

5669Strong, thin and flexible PU foam. Excellent chemical resistance and

dimensional integrity during die cutting.0.4; 0.8 11 -40ºC to +120ºC

Automotive emblem mounting, mobile telecommunication device bonding, light fitting

surrounds.

ESK-M3G162, WSK-3G184-A4 (Ford).

23

Acrylic Foam Tapes (AFT)


Peel Adhesion

N/cm

Dynamic ShearN/cm²



A1138 Good initial tack and high adhesion build up. Excellent cohesive strength and

chemical resistance.GY

0.6451 49

-30ºC to +100ºC ST +150ºC (1h)

Bonding engineered plastics, metal fabrication, panel fixing.

Compatible with Pilklngton Activ.TM

A1178 1.14

A1139Excellent tack and initial adhesion

strength.

W 0.64

40 53-30ºC to +85ºC ST +130ºC (1h)

Signage manufacturing, trim attachment and metal stiffener

bonding.

Fire rated M1. Comparible with Lexan®

Polycarbonate, Pilkington Activ.TM

A1179 W, GY 1.14

A1100Good initial tack and adhesion strength.

High shear strength.CL 0.25 19 61

-30ºC to +149ºC ST +204ºC (1h)

Bonding decorative metal trims and profiles.

Compatible with Pilkington Activ.TM

A1130TLTranslucency gives substrate colour

matching properties. High initial adhesion.TL

0.64

33 19Panel to framework assembly,

graphics mounting, sign making.

A1130TPThin colourless bonding tape with good tack and adhesion strength. High shear

strength.

CL 38 27POS, display assembly bonding,

safety glass manufacture, bonding of clear plastics and glass.

A1160

Colourless tape for bonding transparent materials. Can improve aesthetics of

finished assemblies. Also available with smooth release PE liner.

1

Compatible with Lexan®

Carbonate, Pilkington Activ.TM

A1170Translucency gives substrate colour

matching properties. High initial adhesion.TL 1.14 33 19

Panel to framework assembly, graphics mounting, sign making.




Peel Adhesion

N/cm

Dynamic ShearN/cm²



A11B0 Thicker colourless tape for bonding transparent materials. Can improve aesthetics of finished assemblies.

CL1.5

40 41

-30ºC to +149ºC ST +204ºC (1h)

Safety glass manufacture, graphics mounting, POS, display assembly.

-

A11T0 2

A177AExcellent adhesion even at low ambient

and substrate temperatures (above 0ºC). Very conformable.

GY 1.14

55 70

Signage, canopy and fascia fabrication mounting. Metal

stiffener bonding, extruded plastic trim attachment, “Georgian” bar

mounting.

A1270Extremely high short and long term heat

resistance. Withstands powder coat painting temperatures.

50 45-30ºC to +149ºC ST +230ºC (1h)

Pre-powder coat painting metal bonding. Bonding of pre-painted materials in truck, signage and

control panel / switch gear assembly.

Approved for photovoltaic

panels framing according to IEC

61215:2005.UL recognized

component in polymeric

adhesive systems in electrical equipment

(according to UL746C) – file

number QOQW2.E329950.

A17Y8Good initial tack and high adhesion build

up. Excellent cohesive strength and chemical resistance.

W 3 51 50-30ºC to +100ºC ST +150ºC (1h)

Commercial vehicle assembly, advertising signage frame

bonding, stiffener attachment in air conditioning.


24

Acrylic Foam Tapes (AFT)

NOTE: Other thicknesses are available on request.


Adhesive Type

Peel Adhesion

N/cm



4450 /*4456 Excellent UV and temperature

resistance. Long ageing performance. Adhesive contains glass fibres for easier converting.

CL 0.04Medium firm

acrylic2.8


Core starting, end tabbing, mounting display items, sample cards, albums, POS assembly.

-

*T001 /T002


Splicing, laminating in product assembly, flying splices of paper

and cardboard.

4460High performance, excellent UV

resistance. Long ageing properties.

TL

0.05 Firm acrylic

5.5


Bonding nameplates, signs, stiffeners, trims.

4942

Good bonding power, high ultimate adhesion. Good shear properties.

Premium choice for application requiring UV resistance.

0.04Medium firm

acrylic-40ºC to +160ºC

ST +180ºCSplicing, laminating in product

assembly.

U800

Very shear at elevated temperature (SAFT > 200°C) - UV and ageing

resistant, excellent die-cutting abilities.

0.05

Firm acrylic

8.3


Fixing of name and faceplates, bonding of flexible printed circuits (FPC’s) in all kinds of applications.

UL recognised component in marking and

labelling systems according to UL969, file

number PGGU2.MH15506.

U801 Thicker version of U800.

0.125

11.2

U802 Thicker version of U837.

Medium soft modified acrylic

16.4-40ºC to +95ºC

ST +125ºCNameplate bonding, Lamination to

foam for gasketing and NVH.-

U837

Excellent adhesion onto low surface energy substrates. Adhesive contains glass fibres for easier

converting.

0.075

25

Transfer adhesives

*Compatible with ATS gun dispenser.Colour KeyAM = Amber BK-SM = Black Smooth CR = Cream NAT = Natural R = Red Y = YellowBE = Beige BL = Blue FL-O = Fluorescent Orange O = Orange SIL = Silver Y-BK = Yellow/BlackBF = Buff BN = Brown GR = Green O-GR = Olive Green TL = Translucent Y-GN = Yellow/GreenBK = Black B-Nat = Bleached Natural GY = Grey P = Purple V = VioletBK-EM = Black Embossed CL = Clear J-GR = Jade Green PR-W = Printed White W = White


Adhesive Type

Peel Adhesion

N/cm



0485

Very aggressive, pressure sensitive adhesive mass. Forms a waterproof

bond. Not suitable for UV exposure.

AM Various Rubber resin - 0ºC to +40ºC

“Third hand” fix in building insulation to walls, plastic sheet

jointing, mounting signs and tiles. Fixing roof bars on commercial

vehicles. Carpet fixing.

-

*4406 /4407

Unique product: differential adhesive (permanent/removable) in form of a

transfer tape. CL 0.03 Acrylic

open side:3.5 / liner side: 0.11

-30ºC to +120ºCRemovable POS display, mounting

promotional items.

4493 /*4494

Thicker version of 4497.

TL

0.09


6.9-40ºC to +110ºC

ST +140ºC

Plastic signs and nameplate mounting.

Fixing trims and rubber profiles.4497

Good tack and adhesion on low and high surface energy substrates. Adhesive contains glass fibres for easier converting. Designed for

smooth surfaces.

0.04 5.4 -40ºC to +110ºC

U691Electrically conductive through its

thickness.GY 0.05

Acrylic with nickel particles

3.6-40ºC to +150ºC

ST +180ºCShielding cloths or materials.

UB5080

High tack and adhesion on low and high surface energy substrates.

Specially designed for rough surfaces. Adhesive contains glass

fibres for easier converting.

TL

0.125Medium soft

modified acrylic

11.9


Name and faceplate fixing, foam gasketing and sound attenuation.

UL recognised component in marking and

labelling systems according to UL969, file

number PGGU2.MH15506.

UP2040 /*UP2040

RW

Very high tack. Adhesive contains glass fibres for easier converting.

Excellent UV and humidity resistance.0.05

Medium soft acrylic

10

Foam gasketing, sound attenuation.

-UP5040 /*UP5040

RW

Thicker version of UP2040/UP2040RW. Especially designed for

rough surfaces.0.125 15

26

Transfer adhesives

*Compatible with ATS gun dispenser.

27

Double sided : Cloth


Adhesive Type

Peel Adhesion

N/cm



099Self-extinguishing. Very

conformable, hand tearable.

W

0.258

Rubber resin

open side: 8.2

liner side: 11.5

-15ºC to +70ºC

Carpet fixing in transportation industry.

Fire resistant against FAR

25.853. Approved by

AIRBUS.

101Hand tearable. Suitable for uneven

surfaces. Humidity resistant.0.33 4

Mounting flexographic rubber plates, attachment of abrasive discs, bonding small pieces

(clock making, jewellery).

-102

Hand tearable. Suitable for uneven surfaces.

0.23 15.7-10ºC to +50ºC

ST +65ºCCarpet fixing, floor covering fixing,

core starting, end tabbing.

174 Hand tearable, aggressive. 0.330 5.6 -10ºC to +80ºC

Temporary mounting for assembly or machine operations, print plate mounting, carpet installation where

a more aggressive adhesive is required.



Adhesive Type

Peel Adhesion

N/cm



98Reinforced with polyester scrim. High

tack and peel adhesion.

TL

0.128 Soft acrylic 9 -40ºC to +100ºC Bonding rubber profiles, sound

dampening materials, foam gasketing.

-

4414High tack and adhesion on low and

high surface energy substrates.0.17

Medium softmodified acrylic

8-40ºC to +110ºC

ST +140ºCRubber profile bonding, extruded

plastic profile bonding.

4929 Self extinguishing, light weight. BK, W 0.140 Acrylicopen side:

3.5liner side: 14

-40ºC to +120ºC Carpet and galley mats fixing

when fire retardant properties are required.

Fire resistant against

FAR25.853.

C705

Differential adhesive system on both sides (silicone liner side / acrylic open side). Excellent chemical resistance.

UV resistant.

TL 0.1

Silicone

open side: 7.6

liner side: 3.8

-30ºC to +180ºC

Bonding elastomer joints, foams, gaskets, rubber profiles.

-

C709

Bonding on silicone treated surfaces or when high temperature/chemical

resistance is required. Residue free removal in most cases.

CL 0.13 3.8 -40ºC to +200ºC

D160Very high tack. Hand tearable. Good

plasticiser resistance.

TL

0.11Medium soft

acrylic6

-40ºC to +95ºC Bonding rubber profiles, sound

dampening materials, foam gasketing.

D100FThicker version of D160. Most

suitable product to bond EPDM rubber. Red plastic liner.

0.20

Acrylic

12-40ºC to +95ºC

ST +120ºCProduct assembly.

D230

Differential adhesive (permanent on open side / removable on liner side) on both sides. Long ageing

properties.

0.08open side: 6

liner side: 2.5

-40ºC to +10ºC Mounting POS items, promotional

materials.

28

Double sided : Polyester

29

Double sided : PVC


Adhesive Type

Peel Adhesion

N/cm


Applications

4400Removes cleanly from most surfaces. Can bond low and high surface energy

substrates. Not suitable for UV exposure.

TL

0.1Cross-linked rubber resin

5.2 -10ºC to +70ºCMounting display items, dummy packs,

sample cards, show card assembly.

4403

High tack and adhesion, on low and high surface energy substrates.

0.24


11

-30ºC to +70ºC

Mirror mounting, POS assembly, trim attachment.

4403E 0.18 16Rubber profiles bonding, POS assembly,

trim attachment.

D100

Exceptional tack and high adhesion onto various surfaces. Good plasticiser

resistance. Most suitable product to bond EPDM rubber.

0.21Medium soft

acrylic 13 -40ºC to +70ºCBonding rubber profiles, sound dampening

materials, foam gasketing.


30

Double sided : Other


Adhesive Type

Peel Adhesion

N/cm


Applications

808Polypropylene carrier, highly conformable,

high tack. Not UV light resistant.W 0.095

Hot-melt rubber resin

4.8-40ºC to +50ºC

ST +65ºCCarpet fixing, floor covering, mounting

display items, exhibition stand assembly.

4448Cellulose carrier, anti-static, biodegradable.

Hand tearable.R 0.085

Cross-linked rubber resin

4.6 -10ºC to +70ºC Splicing.

C706Polyimide (Kapton®) carrier combined with silicone adhesive provide exceptional heat

and chemical resistance.AM 0.102 Silicone 2.8 -40ºC to +240ºC

Bonding elastomers joints, foams, gaskets, rubber profiles.

31

Double sided : Tissue


Adhesive Type

Peel Adhesion

N/cm


Applications

956 Hand tearable. High tack and adhesion.

TL

0.102 Soft acrylic 9.7 -10ºC to +80ºC Third hand in sail assembly.

4426Hand tearable. Good UV and ageing

properties. Medium tack and adhesion.

0.12Medium firm

acrylic

3.6-10ºC to +150ºC

ST +180ºCFlying splice and cardboard.

Product assembly.

4440 W 0.09 4.4 -20ºC to +120ºC Core starting, end tabbing. Fascia assembly,

nameplates bonding,


32

Heat seal


Peel Adhesion

N/cm

Tensile Strength

N/cm


Applications

G321 Thermofilm®

Thermosetting nitrile-phenolic adhesive. Excellent solvent, chemical, plasticiser,

temperature resistance once cured. BN

0.05

- - -40ºC to +200ºCProcess splicing tape in manufacture of PVC

flooring, glass cloth and technical textiles.H192U 0.133

H193UThermofilm®

Thicker version of H192U.0.203

33

Guide by Market

As a market-led organisation, our marketing and technical teams are continuously evaluating client needs, in order to meet their evolving requirements.Our sales people are experienced in working with you to find the right solution for your product and business needs, while our technical service and customer care teams ensure your ongoing satisfaction.

As a specialist provider of bonding solutions, with an unrivalled range of adhesive tapes, films and foams, Scapa offers customers the benefit of dealing with a core supplier and manufacturer. With customers and market understanding as leading principles, Scapa is committed to a partnership approach with its customers.

The following is a guide to the key applications of our listed products. This is not intended to be an all-encompassing list as many products can be used in numerous ways and new applications are continually being developed.

34

Building and Construction

Asbestos removal

Product Description Page

3159 Coated cloth tape 3




Electrical


2701 Electrical PVC tape 16




2901 Polyethylene tape 12


Glazing


330 Aluminium foil tape 1


1695 Polyester film tape 11






3492 Hard PVC foam tape 19



5179 Double sided PVC tape 21


5429 Double sided PE foam 21

A1130TL Acrylic foam tape 23

A1139 Acrylic foam tape 23


HVAC


331E Aluminium foil tape 1







875 Aluminised polypropylene 14



35

Roofing and cladding


0485 Extruded rubber strip 26

2500 Polyethylene film tape 12

2900 Polyethylene film tape / non adhesive 12

3009 Soft PVC foam sealant 18








HVAC



3154 Medium soft PVC foam tape 18











Painting: Surface protection


2595 Paper masking tape 8

9060C Paper masking tape 8

9060S Paper masking tape 8






Plastic extrusion








C705 Double sided PET tape 28

D100 Double sided PVC tape 29

D100F Double sided PET tape 28

UP5040 Transfer adhesive tape 26

Building and Construction (continued)

36

Roofing and cladding (continued)




3154 Medium soft PVC foam sealant 18










3507 Hard PVC foam sealant 20




T3601 Coated cloth tape 3

Electro Technical

Electro Technical


1304 Uncoated cloth tape 4

1502F Uncoated cloth tape 6

1503B Uncoated cloth tape 4

1504H Uncoated cloth tape 6


1801 Polymide film tape 14

8705B Polyester film tape 11

C556 Polymide film tape 14

Building and Construction (continued)

37

Electronics


1801 Polyimide film tape 14

4460 Transfer adhesive tape 25

5669 Double sided PU foam tape 22

C556 Polyimide film tape 14

C574NS Polyester film tape 11



U691 Transfer adhesive tape 26



Entertainment








Carpet joining




Carpet laying


099 Double sided cloth tape 27

0485 Extruded rubber strip 26


808 Double sided polypropylene tape 30

4929 Double sided polyester tape 28

Electronics

Entertainment

Flooring

Carpet protection




Floor marking


2721 PVC tape 16

2724 PVC tape 16

38

Flooring systems



Furniture

Military







330D Aluminium foil tape 1

Flooring production


G321 Heat seal tape 32

H192U Heat seal tape 32

H193U Heat seal tape 32

K125 Polyester film tape 11

K132 Paper splicing tape 9



Furniture


5464 Double sided PE foam tape 22





Military

Packaging


1250 Polypropylene film tape 14



1621 Polyester adhesive tape 11


2210 PVC adhesive tape - general 15

2254 PVC adhesive tape 15


2901 Non adhesive tape 12





Packaging

Flooring (continued)

39

Point of sale


808 Double sided polypropylene tape 30


4403E Double sided PVC tape 29

4406 / 4407 Transfer adhesive tape 26

4450 / 4456 Transfer adhesive tape 25










A11BO Acrylic foam tape 24

A11TO Acrylic foam tape 24

A1130TP Acrylic foam tape 23


D230 Double sided polyester tape 28

Powder coating





1801 Polimide film tape 14



C556 Polimide film tape 14

C574NS Polyester film tape 11

R592 Polyester film tape 10

Point of sale Powder coating

Signage


A11BO Acrylic foam tape 24

A11TO Acrylic foam tape 24

A177A Acrylic foam tape 24




Signage

40

Graphic arts




Surface protection

General











2595 Paper adhesive tape 8



Sandblasting




9830 Paper masking tape (up to +80ºC) 9

Transportation

Aviation surface protection


330R Aluminium foil tape 1


2604 Polyurethane protection tape 7


9130S Paper masking tape (up to +150ºC) 8

Carpet fixing




4929 Double sided polyester tape 28

Signage (continued) Surface protection (continued)

41

Other





5164 Double sided PVC foam tape 21






5669 Double sided PU foam tape 22



Vehicle assembly


0485 Extruded rubber resin strop 26



3507 Hard soft PVC foam sealant 20

3509 Hard soft PVC foam sealant 20



A17Y8 Acrylic foam tape 24

Wire harnessing



3369 Self extinguishing cloth tape 5



Surface protection


1433 Polyethylene protection tape 12

9060C Paper masking tape (up to +60ºC) 8






Transportation (continued)

42

White goods

Wire harnessing





3824 Hard PVC tape 20

3829 Hard PVC tape 20

4460 Transfer adhesive tape 25



UB5080 Transfer adhesive tape 26

www.scapa.comEmail: [email protected]

France España Deutschland Italia

ValenceTel: +33 (0) 475 44 80 00Fax: +33 (0) 475 44 80 53

BarcelonaTel: +34 93 652 99 40Fax: +34 93 630 51 27

MannheimTel: +49 (0) 621 47091-0 Fax: +49 (0) 621 47091-80

GhislarengoTel: +39 0161 867 400Fax: +39 0161 860 329

United Kingdom Korea Asia Pacific North America

ManchesterTel: +44 (0) 161 301 7400Fax: +44 (0) 161 301 7445

SeoulTel: +82 2 561 45 11Fax: +82 2 561 45 14

Shah AlamTel: +60 3 5569 2529Fax: +60 3 5569 2528

WindsorTel: +1 860 688 8000Fax: +1 860 688 7000

For further information, please contact Scapa Customer Care in your preferred location:

Sca

pa E

urop

e Deutschland, MannheimEspaña, BarcelonaFrance, ValenceItalia, GhislarengoSwitzerland, RorschachUnited Kingdom, ManchesterUnited Kingdom, Dunstable

Sca

pa

Nor

th A

mer

ica Canada, Renfrew

USA, InglewoodUSA, SyracuseUSA, Windsor

Sca

pa

Asi

a China, Hong KongChina, ShanghaiChina, SchenzhenKorea, SeoulMalaysia, Shah AlamTaiwan, TaipeiIndia, MumbaiThailand, Pathumtanee

industrial product guide3.imimg.com/data3/vr/qe/my-2/scapa-industrial-product... · 2020. 1....

Documents