industrial ventilation - raem srlraemsrl.it/pdf/04_industrial_ventilation.pdfindustrial ventilation...

Industrial ventilation


91

AXIAL IMPELLERS

N.B.: On demand detailed estimates of the above material can be supplied. The motor power, the number of blades, the shaft diameter and the number of revolutions must always be quoted.

Type WØ 405 - 1980 mmhub in aluminium alloy and blades in glabs-charged polypropylene (5-6 blades)

Type H

Ø 200 – 742 mmhub in aluminium alloy and blades in glabs-charged polypropylene (6-8 blades)

Type G

Ø 780 – 2530 mmhub in aluminium alloy and blades in glabs-charged polypropylene (6-8 blades)

Type D

Ø 250 – 630 mmhub in aluminium alloy and blades in glabs-charged polypropylene

Type M

Ø 220 – 508 mmhub in aluminium alloy and blades in glabs-charged polypropylene

Type MA

Ø 220 – 508 mmhub and blades in aluminuim alloy

92

code modelW. eff

W. abs

A V rpm C H Efan Ø / °

cond.(mF)

4108.0111 82US 3016/10 16 63 0.44 230 1550 88 30 13.5 254/22

4108.5135 82UL 3016/25 17 60 0.7 115 1550 88 30 13.5 254/22

4110.4048 82-2010/22 10 45 0.55 115 1300 88 20 13.5 254/22

4111.4015 82V-2010/22 7 35 0.15 380 1300 88 20 13.5 254/22

4121.0018 83-2030/1 30 65 0.33 220 2500 88 20 13.5 200/28 2.5

4110.2013 82-3016/02 16 75 0.45 230 1550 88 30 13.5 300/22

4111.4611 82V-4534/10 34 130 0.50 380 1300 88 45 38 300/34

Fan EVA series 82

technical features:

- single phase motor with 4 shaded poles 220-240V;- Power supply from 5 to 34W;- insulating clabs “ B “, protection degree IP42.

technical features:

- single phase motor with 2 or 4 shaded poles from 115 to 380V.

code modelW.

givenW. abs

A. rpm H B C D EImpeller

Ø / °motor weight

kg.EVA05 5 30 0.2 1300 13 - 81 72 164 200/28 0.950

EVA10 10 45 0.3 1300 20 - 88 84 164 254/22 1.220

EVA16 16 75 0.45 1300 30 54 98 109 201 300/22 1.880

EVA25 25 115 0.75 1300 40 63 108 109 201 300/22 2.280

EVA34 34 130 0.85 1300 45 90 141 109 201 300/34 2.550


93

code model V. Hz.W.

givenW.a. rpm

Cond.mf

A BØD

Type

4120.3606 82GV 3025/5 230 50/60 25 120 1300 - 113 31 9.52 A

4120.3609 82GV 3025/7 230 50/60 25 120 1300 - 123 40 7 A

4121.0009 83D 2535/17 230 50/60 35 95 1300 2.5 - - 9.52 B

Fan EVA series 82GV/83D

N.B. - motors 82GV : front and back slotted cover with three threaded holes at 120° M5 with cable length of 3 meters. - motors 83D : front and back closed cover with three threaded holes at 120° M5 with cable length of 2 meters.

Single phase motors for industrial refrigeration with shaded poles and 4 poles capacitor 230V.

94

code model Volt.Ø

baseh.

asp. unitH.

totalpicture

SPED08 dust 230 106 60 154 1

Motor 850 W.

Motor 1000 W.

code model Volt.Ø

baseh.

asp. blockH.

totalpicture

SPED10P dust 230 144 66 164 2

SPED10P/30 dust 230 144 40 130 3

SPED10P/R dust 230 144/130 66 164 4

SPED10TV dust - liquids 230 144 69 175 6

SPED10P/3S dust 230 144 88 186 5

SPED10TN/50 dust - liquids 230 144 50 137 7

Picture 1

Picture 2 Picture 3 Picture 4


MOTORS for DUST and LIQUIDS


95

code model Volt.Ø

baseh.

asp. blockH.

totalpicture

SPED12TN dust - liquids 230 144 69 175 4



SPED12TN/3S dust - liquids 230 144 100 200 6

SPED12HCX dust 230 129,5 32 116,5 7

MOTORS for DUST and LIQUIDS

Motor 1000 W. - channelized model

Motor 1200/1500 W

code model Volt.Ø

baseh.

asp. unitH.

totalpicture

SPED10P/C50 dust 230 144 51 143 1

SPED10P/C dust 230 144 77 177 2

SPED10P/C3 dust 230 144 100 200 3

SPED10P/C324 dust 24 144 77 177 2

Picture 4 Picture 5 Picture 7Picture 6

Picture 1 Picture 3Picture 2

96

code descriptionH032 Motor completed with support and impeller with 2 shaded poles and 3 speeds 2800 rpm

MOTORS for VORWERK FOLLETTO

code description pictureFO.01 MOTORS for VORWERK FOLLETTO model VK117 – VK118 1

FO.02 MOTORS for VORWERK FOLLETTO model VK120 – VK121 – VK122 2

FO.03 MOTORS for VORWERK FOLLETTO model VK130 - 131 3

Motor for CAPPE di ASPIRAZIONE



97

MOTORS for AIR HEATERS

Three phase asynchronous motor 230/400 V. 50Hz class F . protection degree IP54

code Impeller Ø inclination blades5103.0001 300 27°

5103.0204 350 27°

5103.0501 400 27°

codeØ

shaftpoles rpm

efficiencyKw.

AERO 11-12 12 6 900 0.11

AERO11-14 14 6 900 0.11

AERO18-12 12 4 1400 0.18

AERO18-14 14 4 1400 0.18

AERO4/6-12 12 4 - 6 950 - 1400 0,04 - 0,07

AERO4/6-14 14 4 - 6 950 - 1400 0,04 - 0,07

AERO4/8-12 12 4 - 8 700 - 1400 0,05 - 0,12

AERO4/8-14 14 4 - 8 700 - 1400 0,05 - 0,12

Axial impellers for air heaters, 4 aluminium blades with supportin steel hole Ø 12,7 mm adjustable.

98

coden°

polesrpm

Shaft length mm.

Ventilated motor

Kw. Amp. mf.

MEC50/2P 2 2800 30 0,09 0,50

MEC50/2PV 2 2800 30 X 0,09 0,50

MEC50/2PVL 2 2800 50 X 0,09 0,50

MEC50/4PV 4 1400 30 X 0,09 0,30

MEC50/4PVL 4 1400 50 X 0,09 0,30

MOTORS for VENTILATION series MEC

coden°

polesrpm

Shaft length mm.

Ventilated motor

Kw. Amp. mf.

MEC50/2PVLM 2 2800 50 X 0,09 0,50 8

MEC50/4PVLM 4 1400 50 X 0,09 0,30 8

Motor 230/400V. class B – IP 44 shaft Ø 10 mm

Motor 230V. class B – IP 44 shaft Ø 10 mm


99

CONNECTION SCHEMES for ventilators EBM PAPST

Single phase motors AC:

Motori Three phase:

Three phase with delta connection:

Electrical connection

100

codedimensions

heigth width thicknessAmpere Watt.

8025/24 80 80 25 0,16 3,90

9225/24 92 92 25 0,15 3,60

12025/24 120 120 25 0,24 5,80

12038/24 120 120 38 0,32 7,70

COMPACT AXIAL FANSS

Compact AXIAL FANSs are largely used in electronic devices, electrical boxes, counters fridge, and are particularly used when a forced ventilation is needed but there is not room.

codedimensions

heigth width thicknessAmpere Watt. picture

8025/220 80 80 25 0,12 / 0,10 13 / 14 1

8038/220 80 80 38 0,10 / 0,08 13 / 12 1

9225/220 92 92 25 0,10 / 0,09 19 / 17 1

12025/220 120 120 25 0,12 / 0,11 18 / 16 1

12038/220 120 120 38 0,12 / 0,10 18 / 16 1

17252/220 172 150 52 0,29 35 2

Motor 220/240 V. 50/60 Hz.

Motor 24 V. D.C.

Picture 1 Picture 2


Motor for REFRIGERATED WINDOW

code V. Hz. rpm m³/h W.a dB. pictureW2S130AA0301 230 50 2800 325 45 49 1

W2S130AA2501 115 60 2800 325 41 49 1

W2E142BB0101 230 50 2800 330 29 52 2

W2E142BB0501 115 60 2800 330 25 52 2

W2E143AA0901 230 50 2800 375 24 55 3

W2E143AA1501 115 60 2800 375 24 55 3

W2E200HK3801 230 50 2550 925 64 59 4

W2E200HK8601 115 60 2550 925 64 59 4

101

code model V. Hz. W. Given W. abs. A. weight Kg.4150.1002 52-2001/1 220 50/60 1 15 0.1 0.550

Picture 1

Picture 3

Picture 2

Picture 4

COMPACT AXIAL FANSS series W2S - W2E

102

code Blades Ø mm. efficiency W. Ampere rpm

CAM25-2/170S 170 95 0,31 2600/3000

CAM25-2/200S 200 95 0,31 2600/3000

CAM25-2/250S 250 95 0,31 2600/3000

AXIAL FANS series CAM

Motor 230/400V. 2 poles 50/60 Hz. series forced fan


103

code V. Hz. m³/h rpm W. A. mf. dB induced forced

A2S130AA0301 230 50/60 325 2800 45 0,19 - 49 X

A2S130AE0301 230 50/60 325 2800 45 0,19 - 49 X

A2D170AA0401 230/400 50/60 535 2650 40 0.11 - 59 X

A2D170AA0402 230/400 50/60 535 2650 40 0.11 - 59 X

A2E170AF2301 230 50/60 500 2650 45 0.21 1.5 62 X

A2E170AF2302 230 50/60 500 2650 45 0.21 1.5 61 X

AXIAL FANSS EBM

Impeller Ø 80 and 110 mm.

Impeller Ø 130 and 170 mm.

code V. Hz. m³/h rpm W. Impeller Ø mf. dB induced forced

4656 EA 230 50 138 2550 19 110 - 42 X

8550 TA 230 50 38 2400 12 80 - 26 X

N.B: Prices of fans do not include the cost of capacitor and fan guard. On demand the whole production EBM / ZIEHL ABEGG / PAPST can be supplied.

104


A2D250AA0201 230/400 50 1685 2650 110 0.22 - 72 XA2D250AA0202 230/400 60 1685 2650 110 0.22 - 72 XA2E250AE6501 230 50 1610 2550 115 0.51 4 72 XA2E250AF6502 230 60 1610 2550 115 0.51 4 72 XA4D250AA0401 230/400 50 890 1420 30 0.09 - 58 XA4D250AA0402 230/400 60 1035 1650 35 0.08 - 62 XA4S250AA0201 230 50 870 1400 72 0.53 1.5 58 XA4S250AA0202 230 60 1000 1630 67 0.46 1.5 62 X

AXIAL FANSS EBM

Impeller Ø 200 mm.

Impeller Ø 250 mm.


A2D200AA0201 230/400 50 830 2800 53 0.15 - 67 XA2D200AA0202 230/400 60 830 2800 53 0.15 - 67 XA2E200AF0201 230 50 740 2740 50 0.24 1.5 65 XA2E200AF0202 230 60 740 2740 50 0.24 1.5 65 XA4D200AA0401 230/400 50 390 1450 22 0.09 - 51 XA4D200AA0402 230/400 60 460 1730 21 0.07 - 55 XA4S200AA0201 230 50 375 1380 40 0.30 - 52 XA4S200AA0202 230 60 445 1630 34 0.24 - 53 X



105


A2D200AK1801 230/400 50 910 2650 65 0.19 - 56 XA2D200AI 1801 230/400 60 1030 3000 60 0.12 - 58 XA2E200AK3801 230 50 910 2650 60 0.28 1.5 56 XA2E200AI 3801 230 60 1030 3000 75 0.31 1.5 58 XA4D200AK1401 230/400 50 490 1450 22 0.08 - 40 XA4D200AI 1401 230/400 60 570 1700 20 0.06 - 44 XA4S200AK0401 230 50 455 1370 30 0.21 - 38 XA4S200AI 0401 230 60 530 1600 26 0.18 - 43 X

AXIAL FANSS EBM

Impeller Ø 200 mm.

Impeller Ø 250 mm.



A2D250AH0201 230/400 50 1830 2500 100 0.20 - 69 XA2D250AI 0201 230/400 60 1950 2650 140 0.23 - 70 XA2E250AL0601 230 50 1820 2450 115 0.51 3 69 XA2E250AM0601 230 60 1970 2600 150 0.66 3 71 XA4D250AH2201 230/400 50 1010 1400 25 0.07 - 54 XA4D250AI 2201 230/400 60 1140 1580 32 0.07 - 57 XA4E250AH0201 230 50 1010 1400 42 0.19 1.5 54 XA4E250AI 0201 230 60 1200 1630 45 0.20 1.5 58 XA4S250AH0201 230 50 1000 1390 69 0.53 - 54 XA4S250AI 0201 230 60 1160 1600 63 0.45 - 58 X

106


A2D300AD0201 230/400 50 2760 2650 180 0.31 - 76 X

A2D300AD0202 230/400 60 2940 2800 270 0.41 - 77 X

A2E300AC4701 230 50 2440 2650 140 0.62 5 75 X

A2E300AC4702 230 60 2700 2900 190 0.83 5 78 X

A4D300AA0201 230/400 50 1740 1370 85 0.21 - 66 X

A4D300AA0202 230/400 60 1910 1520 110 0.22 - 68 X

A4E300AA0101 230 50 1690 1350 95 0.44 3 65 X

A4E300AA0202 230 60 1830 1450 105 0.47 2 66 X

A4S300AA0201 230 50 1440 1380 94 0.67 - 62 X

A4S300AA0202 230 60 1600 1550 94 0.67 - 64 X

AXIAL FANSS EBM

Impeller Ø 300 mm.

Impeller Ø 350 mm.



A4D350AA0601 230/400 50 2900 1420 145 0.39 - 69 X

A4D350AA0602 230/400 60 3300 1620 190 0.36 - 72 X

A4E350AA0601 230 50 2850 1390 140 0.62 5 68 X

A4E350AA0602 230 60 3190 1550 195 0.86 5 70 X


107


A4D450AP0101 230/400 50 5440 1380 200 0.48 - 72 X

A4D450AP0102 230/400 60 6040 1540 285 0.53 - 75 X

A4E450AP0101 230 50 5700 1400 245 1.10 8 73 X

A4E450AP0102 230 60 6500 1600 355 1.55 8 76 X

A6E450AP0201 230 50 4725 980 165 0.80 4 63 X

A6E450AP0202 230 60 5450 1070 225 0.98 4 67 X

N.B: Prices of fans do not include the cost of capacitor and fan guard. On demand the whole production EBM / ZIEHL ABEGG / PAPST can be supplied

AXIAL FANSS EBM Series AP

Impeller Ø 400 mm.

Impeller Ø 450 mm.


A4D400AP1201 230/400 50 4000 1450 135 0.44 - 68 X

A4D400AP1202 230/400 60 4610 1690 185 0.39 - 72 X

A4E400AP0201 230 50 4235 1430 160 0.73 6 69 X

A4E400AP0202 230 60 4950 1700 240 1.06 6 73 X

A6E400AP1001 230 50 3290 940 120 0.55 3 59 X

A6E400AP1002 230 60 3780 1080 170 0.75 3 62 X

108

AXIAL FANS with EXTERNAL ROTOR series CAM

N.B. A induced P forced

Single phase motor 230 V.

Fans with external rotor and impeller from 300 to 450 mm, 4 and 6 poles, 230V and 380V, impellers are in cold moulded and painted steel sheet; blades are trapezium-shaped up to a diameter of 300 and sickle-shaped for larger diameters.Rotating elements are both statically and dynamically balanced.Overall dimensions and the position of fixing points make our fans interchangeable with similar devices on the market.Motors are made with insulation class B, thermally protected (single phase models), mounted on sealed maintenance free bearings .These fans are suitable both for horizontal and vertical operation.

- Protection degree IP54- delta temperature 0/+60°C- metal fan guard- power connections with junction box- capacitor for single phase included

codeImpeller

ØHz. poles W. in A. mf. rpm m³/h

CAM300/MA 300 50 4 80 0.40 3 1380 1743

CAM300/MP 300 50 4 80 0.40 3 1380 1743

CAM350/MA 350 50 4 150 0.70 4 1380 2973

CAM350/MP 350 50 4 150 0.70 4 1380 2973

CAM400/MA 400 50 4 180 0.80 6 1380 4400

CAM400/MP 400 50 4 180 0.80 6 1380 4400

CAM450/MA 450 50 4 250 1.20 8 1350 5507

CAM450/MA6 450 50 6 160 0.80 6 920 4600


109

AXIAL FANS with EXTERNAL ROTOR series CAM

model( 230 V. )

Impeller Ø

Blade type Df L E F A Dg

CAM300 300 A 360 92 80 30 86 7

CAM350 350 B 422 102 90 30 104 9

CAM400 400 B 470 102 90 30 117 9

CAM450 450 B 522 102 90 30 130 9

CAM450 6p. 450 B 522 102 90 30 130 9

110

model b3 b5 b6 d1 d2 d3 e

FB045 184 44 96 445 9 539 515

FB050 204 67 96 497 9 589 565

FB056 204 67 100 552 9 725 700

FB063 224 87 100 627 9 778 750

AXIAL FANS ZIEHL ABEGG series FB

AXIAL FAN with ALUMINIUM SHEET BLADES from 450 to 630 mm.


111

N.B: on demand motors with different voltage and frequencies from standard can be supplied.

code V. Hz. poles rpm m³/h. dB.

FB045-VDK.4C.6P 380 50 4 1340/1040 6200 79

FB045-4EK.4F.6P 220 50 4 1325 5900 77

FB045-SDK.4C.6P 380 50 6 920/720 4200 69

FB045-6EK.4C.6P 220 50 6 885 3900 68

FB050-VDK.4I.6P 380 50 4 1330/1035 8300 80

FB050-4EK.4I.6P 220 50 4 1220 7900 80

FB050-SDK.4C.6P 380 50 6 880/620 5700 69

FB050-6EK.4F.6P 220 50 6 910 5800 69

FB056-4DK.4I.6L 380 50 4 1400 10100 80

FB056-SDK.4F.6P 380 50 6 860/520 7900 73

FB056-6EK.4I6P 220 50 6 930 8300 74

FB056-ADK.4F.6P 380 50 8 650/500 5500 63

FB063-SDK.4I.6P 380 50 6 860/650 10800 78

FB063-6EK.4I.6L 220 50 6 920 9700 76

FB063-ADK.4F.6P 380 50 8 640/470 8200 70

FB063-8EK.4I.6P 220 50 8 660 8400 71

FB063-8DK.4K.6P 380 50 8 640 8200 70

AXIAL FANS ZIEHL ABEGG series FB

112

model A B C D E

FC045 99 33 447 62 126

FC050 100 37 497 62 141

FC056 118 57 553 62 157

FC063 94 43 627 62 161

FC071 94 47 703 62 182

FC080 115 46 788 62 182

AXIAL FANS ZIEHL ABEGG series FC

AXIAL FANS with AIRFOIL BLADES

N.B. : fans of series FC are supplied without fan guard.


113


FC045-4DA.4C.1 400 50 4 1390 6400 78

FC045-4EA.4C.1 230 50 4 1370 6340 78

FC050-4DA.4F.1 400 50 4 1380 8200 81

FC056-VDA.4I.2 400 50 4 1220/910 12200 82

FC063-VDA.6K.2 400 50 4 1340/1070 18600 90

FC063-6EA.4I.1 230 50 6 880 12000 79

FC063-6EA.4I.2 230 50 6 880 12000 79

FC071-SDA.6K.2 400 50 6 890/710 16800 82

FC071-6EA.6K.2 230 50 6 850 16400 81

FC080-SDA.6K.1 400 50 6 900/690 23100 82

FC080-SDA.6K.2 400 50 6 900/690 23100 82

FC080-ADA.6K.2 400 50 8 680/520 17500 75

FC080-ADA.6K.1 400 50 8 680/520 17500 75

FC080-NDA.6K.1 400 50 12 430/310 10500 65

FC080-NDA.6K.2 400 50 12 430/310 10500 65

AXIAL FANS ZIEHL ABEGG series FC

114

model A B C D E Ø a Ø b Ø c Ø d

FE031 80 32 * 103 39 312 324 355 378

FE035 84 29 * 103 36 353 369 395 416

FE040 84 16 62 129 59 396 422 455 477

FE045 96 48 62 141 67 446 474 515 539

FE050 96 52 62 141 67 497 524 656 589

FE056 92 39 62 161 69 552 647 700 725

FE063 131 29 62 181 88 627 698 750 778

FE071* - - 62 188 - 703 - - -

FE080* - - 62 207 - 788 - - -

FE091* - - 62 207 - 905 - - -

AXIAL FANS with 7 BLADES in DIE CASTING ALUMINIUM

AXIAL FANS ZIEHL ABEGG series FE

(*) fan guard supplied only on demand.


115


FE031-4DK.0C.6 400 50 4 1410 2200 66

FE035-4DK.0C.6 400 50 4 1360 3100 68

FE040-VDK.2C.6 400 50 4 1300/970 4600 70

FE045-VDK.4F.6 400 50 4 1340/1000 7350 76

FE045-4EK.4I.6 230 50 4 1310 7200 75

FE045-SDK.4F.6 400 50 6 900/700 4950 68

FE045-6EK.4F.6 230 50 6 910 4910 68

FE050-VDK.4I.6 400 50 4 1340/1000 9700 76

FE050-4EK.4I.6 230 50 4 1210 9050 73

FE050-SDK.4F.6 400 50 6 900/640 6350 68

FE050-6EK.4F.6 230 50 6 890 6400 67

FE056-SDK.4F.6 400 50 6 880/670 7800 74

FE063-SDK.4I.6 400 50 6 900/690 11200 77

FE063-ADK.4I.6 400 50 8 650/480 8200 70

FE063-8EK.4I.6 230 50 8 650 8200 70

FE071-SDA.6F.2 400 50 6 900/680 15000 77

FE071-6EA.6F2 230 50 6 860 14800 76

FE080-SDA.6N.2 400 50 6 880/660 25600 83

FE080-ADA.6N.2 400 50 8 680/530 19600 76

FE080-NDA.6K.2 400 50 12 440/330 12300 66

FE091-SDA.6N.2 400 50 6 860/660 26500 85

AXIAL FANS ZIEHL ABEGG series FE

N.B. - these models are induced ones; some are available also as forced models.

116

code a b c d e f g h i V. Hz. rpm m³/h W. A. mf.

R2E108AA0105 108 50 53 57 20 84 59 17 47 230 50 1650 155 41 0.19 1.5

R2E120AR7705 120 62 83 63 15 96 92 27 58 230 50 2350 255 80 0.35 2

R2E140AE7705 140 59 72 63 15 121 92 27 58 230 50 1400 370 105 0.46 2

R2E140AL4005 140 59 72 73 25 121 92 27 58 230 50 1650 385 135 0.60 2

R2E140AI2805 140 59 72 83 35 121 92 27 58 230 50 2400 485 160 0.70 4

R2E160AY4710 160 62 72 91 42 131 92 27 58 230 50 2100 600 240 1.05 6

R4E160AB0101 160 62 72 72 25 131 92 27 58 230 50 1300 410 67 0.30 2

R4E200AL0305 202 102 129 117 48 176 102 75 90 230 50 1480 1315 280 1.25 8

RADIAL FANS series R2E-PA

SUCTION RADIAL FANS with FORWARD BLADES 2/4 POLES

Fans single phase with forward blades 2 and 4 poles, simple suction and permanent capacitor.

Impeller is made of zinc sheet metal.

Air flow rate up to 1315 m3/h, insulating class “B”.


117

code A B C D E F G V Hz. m³/h. W. A. mf.

R2S175AB5601 175 131 72 61.5 69 42 62 230 50/60 440 53 0.33 -

R2E190AO2605 190 131 92 62.7 68.5 44.6 62.8 230 50/60 570 58 0.26 2

R2E220AA4005 220 159 92 63 71 44 63 230 50/60 860 85 0.38 3.15

R2E220AB0605 220 159 92 73 71 44 63 230 50/60 885 85 0.38 2.5

R2E225BD9209 225 153 92 83 99 62.6 89.3 230 50/60 1200 135 0.60 4

R4E225AT0105 225 153 92 72.6 99 62.6 89.3 230 50/60 655 40 0.20 1.5

R2E250AS4705 250 172 92 97.5 99 56 84.3 230 50/60 1450 155 0.70 5

R4E250AH0105 250 172 92 72.6 99 56 84.3 230 50/60 810 43 0.20 1.5

RADIAL FANS series R2E

SUCTION RADIAL FANS with REVERSED BLADES 2/4 POLES

N.B. - on demand models with voltage 110V / 50Hz are available.

Fans single phase 2 and 4 poles, simple suction, permanent capacitor and shaded poles.

Air flow rate up to 1450 m3/h, insulating class “B”.

Impeller is made of plastic material reinforced with glass fibers for the models with a diameter up to 225 mm, for the model of 250 mm impeller is made of plastic but mounted on a disc in sheet metal.

118

code A B C D E V. Hz. m³/h W. A. mf.

R4E310AF1205 315 206 160 100 133 230 50/60 1660 105 0.47 4

RADIAL FANS series R4E

SUCTION RADIAL FANS with REVERSED BLADES 4 POLES

Fans single phase 4 poles, simple suction with permanent capacitor.

Impeller is made of thermoplastic material reinforced with glass fibers.

On demand models with voltage 380V three phase are available.


119

code V. Hz. Kw. A. rpm mf. °C m³/h.

RH31M-4EK.2°.2R 230 50 0.16 0.8 1330 4 50 1840

RH35M-VDK.4°.1R 400 50 0.25/0.18 0.47/0.28 1330/1030 - 60 2850

RH35M-4EK.4C.1R 230 50 0.31 1.45 1360 6 65 2850

RH40M-4DK.4C.1R 400 50 0.45 0.86 1340 - 55 4100

RH40M-4EK.4F.1R 230 50 0.49 2.2 1350 5 40 4100

RH45M-VDK.4F.1R 400 50 0.69/0.35 1.3/068 1210/830 - 40 5600

RH45M-4EK.4I.1R 230 50 0.73 3.3 1230 12 60 5400

RADIAL FANS ZIEHL ABEGG series RH

RADIAL FANS WITH HIGH PERFORMANCE

Radial fans with impeller in aluminium and revesed blades, single and three phase, 4 poles high performance, air flow rate from 1830 to 5600 m3/h.

Motor with external impeller and junction box IP54, on demand the power supply cable can be supplied.

120

codeImpeller

Øcurrent

A.capacitor

mf.Rpm

Air flow ratem³/h

Picture Blades

RH10-2/190 190 x 45 0.28 2 2330 545 1 Plastic

RH25-2/220 220 x 44 0.33 2.5 2650 815 2 Plastic

RH42-2/225 225 x 63 0.62 6 2700 1200 3 Sheet metal

RH42-2/250 250 x 56 0.64 6 2670 1530 3 Sheet metal

CENTRIFUGAL FAN series RH

Picture 1 Picture 3Picture 2

Single phase motor 230 Volt 50/60 Hz. 2 Poles


121

codeCDV/3V commutator

MPCD20 knob

COMMUTATORS CDV

Speed commutators for fan coils, 3 positions and zero, 250V. 10A.

122

code W. rot. V. A. Hz rpm A B C D E F GK35410MO1975

33/86SX

230 0.38 50 1200 100 175 109 280 100 22.8 22.8K35410MO2078 DX

K35410MO1298 35/100 230 0.45 50/60 1150 126 180 133.2 310 105 22.8 47.2

190016261250 Precabled connection length 1200 mm

MOTORS for FAN COIL series K35

CONNECTION SCHEME K35410MO1975 CONNECTION SCHEME K35410MO1298

CABLES FOR RAPID CONNECTION ARE AVAILABLE


123

code W V A. Hz rpm A B C D E F GK35417MO1792 60 230 0.83 50 1200 126 222 222 133.2 570 105 105

K35411MO1344* 50 230 0.55 50 1170 111 170 170 120 460 90 90

190016261250 Precabled connection length 1200 mm

MOTORS for FAN COIL series K35

N.B - (*) Motor supplied without base plate.

CONNECTION SCHEME

124

code W V. A. rpm A B C D E FK35410MO1822 32 230 0.4 1100 115 227 227 120 570 105

K35610MO1821 18 230 0.25 850 115 227 227 120 570 105

MOTORS for FAN COIL series K35 (3 speeds)

Motors 4 and 6 poles with 3 speeds.


125

code V. Hz. W. A. rpm n. velocità CC017805 230 50/60 20 0.3 1200 3 2

COMPACT MOTOR RPM MULTI SPEED

126

code modelWgiv

Wa Ampere rpm A B CØ

shaftE F

4130.3802 83B 4040/1 40 135 0.50 1100 480 175 175 9.52 40 131

4127.0220 A38B 3025/5 * 25 75 0.30 1300 450 170 170 9.52 30 111

MOTORS for FAN COIL series 83B

Motori 230V. 6 speeds Shaft Ø 9,52 mm

N.B. - Motor with autotransformer


127

codemodel

modelWgiv

W ab. A.N°

speedrpm T B C D E

4137.0002 * 103M 2025/1Q 23 85 0.38 3 1100 280 80 165 - 115

4137.0004 103B 2025/3Q 23 85 0.38 3 1100 490 80 180 180 115

4137.0403 103B 3050/1Q 35 110 0.55 3 1100 565 80 210 210 115

4137.0802 103B 4080/1Q 80 210 1.10 3 1100 555 80 200 200 135

4137.0417 ** 104 3045/1Q 35 100 0.48 4 1100 475 80 180 180 115

4137.0411** 104B 3045/2Q 45 120 0.53 4 1100 563 100 224 224 115

4137.0416** 104B 3060/1Q 60 157 0.72 4 1100 563 100 220 220 115

4137.1201** 104B 5060/1Q 60 190 0.84 4 1100 525 80 195 195 135

4137.1208** 106B 5085/1Q 85 310 1.40 6 1100 555 80 210 210 135

4137.1226** 104B 50110/1Q 113 300 1.40 4 1100 515 80 190 190 135

4137.1212** 103B 50185/1Q 185 375 1.80 3 1100 545 100 205 205 135

4138.0001 103B 62020/1Q 18 75 0.40 3 800 515 80 210 210 115

MOTORS for FAN COIL series 102Q

Single phase motors 230V, 4 and 6 poles, power supply from 15 to 110W, from 3 to 6 speeds

N.B. – (*) Motor single cam clockwise rotation shaft side (**) Motors supplied without base plate

128

code V. Hz. W. A. rpm n° speeds µF11020013 230 50/60 250 2.72 1200 3 8

MOTORI RPM for FAN COIL

code V. Hz. W. A. rpm n° speeds µF1103.5600 230 50/60 147 1.5 1380 3 8

1103.3605 230 50/60 184 1.8 1380 3 6.3


129

code V. Hz. W. A. rpm n° speeds µF.1103.4501 230 50/60 600 4.8 1310 3 16/20

MOTORI RPM for FAN COIL

code V. Hz W. A. rpm n° speeds µF.1102.1403 230 50/60 420 3.62 1200 3 12.6

130

Motor 7 velocità con autotrasformatore 230 Volt 50/60 Hz. più capacitorshaft Ø 10 mm. imbussolato a 12,7 mm.

coden°

alberin°

rpmWatt. Amp. n°

cond.mf.

Amm.

Bmm.

GA03012 1 930 35 - 85 0,40 4 1,5 118 215

GA04007 2 960 50 - 115 0,46 4 3,15 122 215

MOTORS for FAN COIL series GA


131

code model V. Hz. A. W. given W. abs. n° speeds

4121.0025 83-2025/01 230 50 0.25 25 55 4

4121.0132 83M-2521/01* 230 50 0,25 25 55 4

Motor 7 velocità con autotrasformatore 230 Volt 50/60 Hz. più capacitorshaft Ø 10 mm. imbussolato a 12,7 mm.

MOTORS for FAN COIL series FC83

Single phase motors with 3 and 4 speeds, suitable for small fan units and fan coil; shaft diameter 9.52 mm sheathed cable length 1200 mm.

N.B. (*) shaft length 60 mm.

code model V. Hz. A. W. given W. sss. n° speeds

4121.0076 83-2015/08 220/240 50 0.23 13 50 3

CLOCKWISE ROTATION SHAFT SIDE


132

code model V/HZ A. speeds m³/h. rpm with pans A Bimpeller measure

4141.1022 FC83M-2015/13 230 50/60 0.25 4 380 1100 NO 231 207 146 x 196

4141.1024 FC83M-2025/2 230 50/60 0.46 4 450 1100 NO 273 207 146 x 240

4141.1094 FC83M-2021/2 230 50/60 0.28 4 500 1100 NO 330 207 146 x 300

4141.1012 FC83M-2025/1 230 50/60 0.46 4 450 1100 SI 273 207 146 x 240

4141.1042 FC83M-2025/4 230 50/60 0.36 6 450 1100 SI 273 207 146 x 240

FAN UNITS for FAN COIL series FC83M

Fan units with motor with 4 or 6 speeds; for some models condensate drain pans are available.As well as being used in fan coil, they are suitable also in ventilated fireplaces.


133

code modelØ

(mm)L

(mm)ØB

(mm)ØD

thickness.AL

(mm)n° fins

4102.0502 120 – 148 120 148 12.7 ¼” 0.65 27

4102.0501 120 – 176 120 176 12.7 ¼” 0.65 27

4013054 133 – 148 133 148 12.7 ¼” 0.65 30

4013055 133 – 176 133 176 12.7 ¼” 0.65 30

4013056 146 - 148 133 196 12.7 ¼” 0.65 3033

4013059 146 – 148 146 148 12.7 ¼” 0.65 33

4013060 146 – 176 146 176 12.7 ¼” 0.65 33

4013061 146 – 196 146 196 12.7 ¼” 0.65 33

4013093 146 – 216 146 216 12.7 ¼” 0.65 33

4102.5913 146 – 240 146 240 12.7 ¼” 0.65 33

4013065 160 – 176 160 176 12.7 ¼” 0.65 36

4102.6102 160 – 196 160 196 12.7 ¼” 0.65 36

4013070 160 – 240 160 240 12.7 ¼” 0.65 36

CENTRIFUGAL IMPELLERS series CDF

134

Code modelW

givenW

abs.A. rpm A B C D

WeightKg.

4131.0102 101M -3070 70 145 0.7 1300 59 121 180 40 2.8

4131.0221* 101M-40120/R 120 245 1 1300 78 141 219 70 3.5

4131.0315* 101M-50150/R 150 270 1.3 1300 108 141 249 85 3.8

MOTORS for VENTILATED EVAPORATORS series 101M

N.B. – (*) reversible rotation is obtained varying the electrical connection.

Single phase motor with permanent capacitor, 4 poles, for impellers until 400mm of diameter.Mounted on self aligning bearings with lubricant reservoir. Class ”B”, IP44.


135

codeØ

impellerinclinaz.blades

5103.0001 300 27°

5103.0204 350 27°

5103.0501 400 27°

MOTORS for VENTILATED EVAPORATORS series 101T

Three phase motors 220/380V 4 poles for helicoidal impellers up to a diameter of 400 mm.Mounted on self aligning bearings with lubricant reservoir. class”B” IP44

code modelW.

givenW.

abs.A. rpm A B C D

weightKg.

4133.0605 101T-30145 145 235 0.45 1300 98 121 219 70 3

4133.0203 101T-40185 185 330 0.68 1300 78 141 219 70 3.5

AXIAL IMPELLERS for 101M and 101T

4 aluminium blades with support in stainless steel hole Ø 12,7 mm adjustable, available also with Ø 450, 500 e 600.

136

MOTORS for TANGENTIAL IMPELLERS series MT

Single phase motors 4 poles with permanent capacitor, multi speed. Suitable for tangential impellers mounted on fan coil.Shaft Ø 8 mm with milled surface to fix the grub screw.They are completely made in metal with covers in die cast aluminium, suitable for operating temperature from 0 to 40°C.

code V. Hz. A rpm W. µF A B

K35406MO1304 230 50/60 0.11 850 23 1 81.4 30

K35410MO1305 230 50/60 0.20 1070 43 1.5 81.4 30

K35410MO1306 230 50/60 0.32 1200 73 5 81.4 30


137

code model V./HZ rpm W. A. µF speeds A b

4121.0136 83M-3-3010/01 230/50 1100 10/40 0.16 1.5 3 128 30

4121.0137 83M-3-4020/01 230/50 1100 25/70 0.27 2 3 138 40

MOTORS for TANGENTIAL IMPELLERS series 83M – 103M

N.B. – Motors 83M can be supplied on demand also with counter clockwise rotation.

code model V./HZ rpm W. A. µF speeds

4131.1702 103M-3030/01 230/50 1100 30/85 0.35 1.5 3

103M


83M

138

Tangential fans with single impeller, used in fan heaters, fireplaces, office machines, dispensers, are characterized by a good efficiency and silent operating.

TANGENTIAL FANS series TG

code W. m³/h rpm A B C D F G

TG..60/1 90/15 14 50 2000 108 90 15 48 43.6 153

TG..60/1 120/20 17 90 2200 133 120 20 53 68.6 148

TG..60/1 180/20 18 140 1800 193 180 20 53 128.6 248

TG..60/1 180/30 33 180 2400 193 180 30 63 128.6 258

TG..60/1 240/30 34 200 2200 244 240 30 63 188.6 318

TG..60/1 270/30 52 220 2500 274 270 30 63 218.6 348

TG..60/1 300/30 53 260 2400 313 300 30 63 248.6 378

TG..60/1 360/30 56 300 2300 377 360 30 63 312 438

The outlined model is the version TGO; the version TGA is the same but with the motor mounted on the other side of the frame.

N.B. – TGO60 motor left. TGA60 motor right The air flow rates have been calculated with open mouth.

139


Tangential fans, used in fan heaters, fireplaces, office machines, dispensers, are characterized by a good efficiency and silent operating.

TANGENTIAL FANS series TGD

code W. m³/h rpm A B C D E F

TGD 60/1 180/30 29 290 1780 193 184 30 457 61 470

TGD 60/1 240/30 30 330 1600 253 244 30 572 71 585

TGD 60/1 270/30 30 350 1620 283 274 30 632 61 645

TGD 60/1 300/30 36 370 1400 313 300 30 694 61 705

TGD 60/1 360/30 45 405 1100 377 364 30 827 71 840

Single phase motors 230V, 50 Hz, aluminium impeller, electrical connection with faston.

N.B. - The air flow rates have been calculated with open mouth.

140

N.B. - on demand they are available also with the motor mounted on the other side from the one outlined. They are made of metal with impellers and sides in aluminium, suitable to operate with temperatures from 0 to + 40° C.

TANGENTIAL FANS series QK08

Tangential fans with high performance, 2 and 4 poles single phase with starting capacitor, air flow rates from 440 to 1180 m³/h. In open air.

code V. Hz. W. A. rpm mFMC/

HdB. A

ØB

L1 L2 L3 L4

QK08A2EM35CF 230 50/60 180 0.8 2400 4 800 70 101 92 350 390 472 372

QK08A2EM50CH 230 50/60 270 1.2 2470 6 1180 71 107 92 500 540 628 522

QK08A4EM35CB 230 50/60 60 0.28 1330 2 440 54 78 92 350 390 449 372

QK08A4EM50CB 230 50/60 60 0.29 1300 2 610 54 78 92 500 540 599 522

QK08A4EM70CD 230 50/60 60 0.29 1340 2 860 54 88 92 700 740 809 722


141

Tangential fans with high performance, 4 poles single with starter capacitor, air flow rates from 680 to 1720 m³/h. in open air.

TANGENTIAL FANS series QK10

code V. Hz. W. A. rpm mf.m³/h

dB AØB

L1 L2 L3 L4

QK10A4EM38CD 230 50/60 70 0.36 12360 2 680 63 86 92 380 420 488 402

QK10A4EM48CD 230 50/60 80 0.35 1140 2 820 62 86 92 480 520 588 502

QK10A4EM48CF 230 50/60 100 0.45 1330 3 890 63 98 92 480 520 600 502

QK10A4EM68CD 230 50/60 80 0.36 1040 2 1040 64 86 92 680 720 788 702

QK10A4EM68CF 230 50/60 120 0.50 1270 3 1190 65 98 92 680 720 800 702

QK10A4EM78CF 230 50/60 120 0.52 1250 3 1360 64 98 92 780 820 900 802

QK10A4EM98CH 230 50/60 140 0.63 1210 4 1600 65 105 92 980 1020 1107 1002

QK10A4EMB8CH 230 50/60 140 0.60 1110 4 1720 64 105 92 1180 1220 1307 1202

N.B. - on demand they are available also with the motor mounted on the other side from the one outlined. They are made of metal with impellers and sides in aluminium, suitable to operate with temperatures from 0 to + 40° C.

142

code V. Hz. rpm W. m³/h H.P.max(Pa)

VCE08256 230 50/60 2350 16 34 12 41

code V. Hz. rpm W. m³/h H. P.max (PA)

VCE08263 230 50/60 2040 23 67 20 132

code V. Hz. rpm W. m³/h H. P.max (PA)

VCE08258 230 50/60 2470 20 40 20 60

CENTRIFUGAL FANS series VC

143

Industrial ventilationCENTRIFUGAL FANS series VC

code V. Hz. rpm W. m³/h P. max (PA)

VCE48545 230 50/60 1600 120 600 350

code V. Hz. rpm W. m³/hh. package

mmP.max (PA)

VCE08260 230 50/60 2435 81 190 35 280

N.B. Models VCE08260 and VCE48545 are made with frame and impeller in aluminium.

144

code V. Hz. m³/h. rpm W. A. Mf. dB.

G2E085AA0101 230 50 80 2350 32 0.15 1 53

CENTRIFUGAL FANS series G2E

code V. Hz.m³h

rpm W. A. mf dB. B D G H I J K L M N O

G2E108AA0101 230 50 155 1650 41 0.19 1.5 54 97 66 8 87 82 300 159 79 168 71 118

G2E120AR7701 230 50 265 2350 80 0.35 2 61 100 68 7 100 98 450 178 82 184 86 132

code V. Hz. m³/h. rpm W. A. mf dB.

G2E140AI2801 230 50 485 2400 160 0.70 4 72


145

code V. Hz. m³/h. rpm W. A. Mf. dB. H I L O

G2E160AY4701 230 50 600 2100 240 1.05 6 72 130 100 103 175

CENTRIFUGAL FANS series G2E

code V. Hz. m³/h. rpm W. A. mf. dB.

G2E140NS3801 230 50 370 1650 105 0.46 2 59

DESCRIPTION:

Centrifugal fans for generical use, air flow rates from 80 to 485 mc/h, single phase motor with external rotor 2 poles and permanent capacitor. Impellers in metal, fan casing in die cast aluminium except in the model NS which is in nylon charged glabs, maximum operating temperature 50°C.

FILTERS FOR SERIES G2E INDUCED

146

Centrifugal fans single phase, double aspiration, completely made of metal, 2 poles with capacitor.

CENTRIFUGAL FANS series D2E

code V. Hz. m³/h.W.abs

A. rpm

D2E097BI5602 230 50/60 435 87 0.39 1950

D2E097BK8002 230 50/60 270 48 0.22 1250

D2E097CB0102 230 50/60 180 42 0.19 1650

D2E133AM4701 230 50/60 685 190 0.84 1500

D2E133DM4701 230 50/60 810 190 0.84 1150

D2E146AP4702 230 50/60 970 300 1.31 2050

model A B C D E H I J K L M N O P

D2E097BI5602 180 168 100 88 67 79.5 146 200 162 86 165 68 114 62.5

D2E097BK8002 180 168 100 88 68 79.5 146 200 162 86 165 68 114 62.5

D2E097CB0102 140 128 78 66 46 80 108 200 144 76 137 62 96 51

D2E133AM4701 254 238 108 92 69 112 215 300 171.5 88 180 79 145 66

D2E133DM4701 270 254 142 126 102 112 232 300 204 97 213 98 145 67.5

D2E146AP4702 270 254 142 126 102 117 232 300 206 97 219 98 145 69

N.B. - on demand they can be supplied also without flange.

147


Centrifugal fans single phase with round mouth Ø 149.5, 4 speeds, suitable for channels, particular machinery and industrial cooker hoods.

CENTRIFUGAL FANS series D2E146


D2E146HS9701 230 50/60 725 1450 200 0.88 5 58

N.B. - on demand the cable for connection can be supplied.

EXAMPLE OF ASSEMBLY IN COOKER HOODS

148

Centrifugal single and three phase motors suitable for industrial cooker hoods, motor with external rotor 4 poles.

They are made completely of zinc sheet metal, maximum operating temperature 40°C.

CENTRIFUGAL FANS series D4E-225

model A B C D E F I S

D4E225CC0102 341 321 304 284 250 287 287 180

D4D225CC0102 341 321 304 284 250 287 287 180


D4E225CC0102 230 50 2650 1150 650 2.84 25 65

D4D225CC0102 230/400 50 2980 1000 650 1.15 - 64


149

Centrifugal fans with small dimensions, suitable for many uses, cooling, solar lamps, projectors, etc.Completely made of sheet metal, motor 2 poles 230V single phase.On demand they are available also with motor rotated 0-90-270 degrees. (here is the version rotated 180°)

CENTRIFUGAL FANS

N.B. - CFA motor on the left, CFO motor on the right.

code V. W. RPM. M³/H a b c d e f g

CFD-DA 80X83-35 230 133 2300 450 303 108 83 136 132 50 78

code V. W. RPM. M³/H a b c d e f g

CFA-DA 80X83-35 230 114 2670 258 185 108 83 136 132 50 78

CFO-DA 80X83-35 230 114 2670 258 185 108 83 136 132 50 78

150

RADIAL IMPELLERS IN SHEET METAL

codeØ

impellerimpellerheight

holeØ

MECdimension

VNC108/32-9 108 32 9

VNC108/32-10 108 32 10

VNC108/42-9 108 42 9

VNC108/42-10 108 42 10

UHC102 108 50 - 80

VNC120/50 120 50 9

UHF142 133 60 11 100

VNC133/72 133 72 11

VNC146/72 146 72 11

VNC160/32 160 32 10

VNC160/40 160 40 9

VRA112 160 80 11 112

UHF182 160 80 14 132

VNC160/88-11 160 88 11

VNC160/88-14 160 88 14

UHF222 180 80 14 160

VNC250/50 200 50 11

UHF222/200 200 100 19 180

UHF232 225 110 24 200

VRA200 225 110 24 225

VNC240/32 240 32 11

VNC240/50 240 50 14

VNC240/90 240 90 24

VNC240/115 240 115 19

VRA225 250 110 28 225-250

VRA280 250 110 28 280

VRA315 280 115 28 315

VNC280/150 280 150 19

VRA400 300 120 38 400

VNC315/50 315 50 19

N.B. –On demand radial impellers of different dimensions can be supplied.

151

Industrial ventilationMOTORS for NICOTRA series DD WITH ARMS

code model W. A. rpm. mF. speeds. picture

K41006 7/7 6P 230V. 62 1 900 4 1 1

141981 7/7 4P 230V. 147 1,7 1400 6,3 3 1

7.520.08 9/9 6P 230V. 147 1,5 900 5 1 2

752962 9/9 4P 230V. 300 2,5 1300 10 1 2

7.520.14 10/10 6P 230V. 245 2,65 900 8 1 3

R52969 10/10 6P 230V. 245 3 900 8 3 3

752918 10/10 4P 230V. 373 3,2 1380 12,5 1 3

7.520.20 12/12 6P 380V. 1100 4,5 900 1 4

752903 12/12 6P 230V. 736 6,8 900 20 1 4

picture 2

picture 4

picture 1

picture 3

152

Centrifugal fans with motor with external rotor high performance, completely made of zinc sheet metal, motors 4 and 6 poles with performance from 184 to 550W.Suitable for industrial cooker hoods or devices that require high pressure.

CENTRIFUGAL FANS NICOTRA series DDM

model A B C D E F G H I L M

DDM 7/7 325 200 186 136 314 152 333 324 232 54 58

DDM9/7 387 262 216 160 378 185 387 354 232 54 58

DDM9/9 387 262 216 160 378 185 387 377 298 54 58

DDM10/8 443 289 249 178 425 203 443 360 265 37.5 58

DDM10/10 443 289 249 178 425 203 443 399 331 10 58

DDM12/9 521 341 294 213 490 230 521 402 309 35.5 58

DDM12/12 521 341 294 213 490 230 521 453 395 - 58


153

CENTRIFUGAL FANS NICOTRA series DDM

code V/HZ W. given A. speeds IP rpm. poles

7/76M02L7 230/50 184 1.9 1 55 1400 4

7/76M02Y8 230/50 300 2.3 1 55 1400 4

9/76M022A 230/50 420 3.6 1 55 1400 4

9/96M02H5 230/50 550 4.6 1 55 1400 4

10/86M02X4 230/50 550 4.6 1 55 1400 4

10/106M02P0 230/50 550 4.6 1 55 1400 4

10/106M029C 230/50 550 4.6 3 55 1400 4

12/126102N5 230/50 515 5 1 55 850 6

7/76M026G 230/50 90 1.1 3 55 900 6

9/76M02H8 230/50 200 1.83 3 55 900 6

9/96M02L4 230/50 200 2 1 55 900 6

10/86M024A 230/50 280 2.85 3 55 900 6

10/106M028F 230/50 280 2.85 3 55 900 6

10/106M025A 230/50 350 3.8 3 55 900 6

154

Fans of series DA, with impeller with forward curved blades coupled directly to the motor, are particularly suitable for small hot air generator, small air conditioner and everywhere an electrical fan of small overall dimensions, maximum silence and cheapness is needed.

CENTRIFUGAL FANS MARZORATI series DA

Technical features:

Air flow rates: to 6500 m³/hPressure: static to 35 mm H20Temperature: to 40°C.

model A B C D E F G H I M N P Q

7/7 200 232 14 164 157 186 143 225 260 277 321 38 45

9/7 262 232 45 194 184 216 176 300 260 303 378 38 35/95

9/9 262 298 45 194 184 216 176 300 326 369 378 38 35/95

10/8 289 265 43 221 207 246 199 340 293 333 428 38 68/85

10/10 289 331 43 221 207 246 199 340 359 399 428 38 68/85

12/9 341 309 50 261 237 291 234 408 337 394 498 38 91

12/12 341 395 50 261 237 291 234 408 423 480 498 38 91

15/15 404 471 60 309 271 344 275 495 502 549 580 38 75

155


code model V. W. speeds poles operate class

713303 DA7/7 230 92 1 4 CLOSED F713306 DA7/7 230 300 1 4 CLOSED F713302 DA7/7 230 92 3 4 HALF-OPEN B713304 DA7/7 230 62 1 6 CLOSED F713305 DA7/7 230 147 3 6 CLOSED F713316 DA9/7 230 368 1 4 CLOSED F713311 DA9/7 230 368 3 4 HALF-OPEN B713315 DA9/7 230 147 1 6 CLOSED F713317 DA9/7 230 243 1 6 HALF-OPEN B713307 DA9/7 230 147 3 6 HALF-OPEN B713314 DA9/7 230 243 3 6 HALF-OPEN B713332 DA9/9 230 368 1 4 CLOSED F713336 DA9/9 230 368 3 4 HALF-OPEN B713329 DA9/9 230 147 1 6 CLOSED F713328 DA9/9 230 243 1 6 HALF-OPEN B713327 DA9/9 230 147 3 6 HALF-OPEN B713335 DA9/9 230 243 3 6 HALF-OPEN B

713355C DA10/8 230 552 1 4 CLOSED F713353C DA10/8 230 552 1 4 CLOSED F713356 DA10/8 230 552 3 4 HALF-OPEN B713354 DA10/8 230 254 1 6 CLOSED F713350 DA10/8 230 243 3 6 HALF-OPEN B

713378C DA10/10 230 552 3 4 HALF-OPEN B713378C DA10/10 230 552 3 4 HALF-OPEN B713373C DA10/10 230 552 1 4 CLOSED F713375 DA10/10 230 368 1 6 HALF-OPEN B713369 DA10/10 230 243 1 6 CLOSED F713370 DA10/10 230 243 3 6 HALF-OPEN B713391 DA12/9 230 552 3 6 HALF-OPEN B713392 DA12/9 230 552 1 6 HALF-OPEN B

713390C DA12/9 230 735 1 6 CLOSED B712311 DA12/9 230/400 1100 1 6 HALF-OPEN B713396 DA12/12 230 552 3 6 HALF-OPEN B713397 DA12/12 230 552 1 6 HALF-OPEN B

713395C DA12/12 230 735 1 6 CLOSED B713399 DA12/12 230/400 1100 1 6 CLOSED F

CENTRIFUGAL FANS MARZORATI series DA

156

Fans of series TA, with impeller with forward curved blades with such outlines to obtain the maximum performance and silence, are used in industrial and civil conditioning plants.

Air flow rates: to 100.000 m³/h.Static pressure: to 150 mm H²0

CENTRIFUGAL FANS MARZORATI with transmission belt series TA

code A B C E F G H L M P Q K X1 Ød U x S

TA 7/7701301M 316 325 208 232 186 153 17 282 340 258 203 225 117 20 11 16

TA 9/7701303M 380 387 262 232 215 185 38 282 340 258 253 300 119 20 11 16

TA 9/9701305M 380 387 262 298 215 185 38 348 394 324 253 300 119 20 11 16

TA 10/8701307M 425 443 289 265 249 203 38 315 355 291 287 340 136 20 11 16

TA 10/10701309M 425 443 289 331 249 203 38 381 420 357 287 340 136 20 11 16

TA 12/9701311M 491 521 341 309 294 230 38 359 420 335 332 408 161 25 11 16

TA 12/12701313M 491 521 341 395 294 230 38 445 510 421 332 408 161 25 11 16

TA 15/11701315M 569 609 404 373 342 264 38 423 510 399 380 495 197 25 11 16

TA 15/15701317M 569 609 404 471 342 264 38 521 608 497 380 495 197 25 11 16

TA 18/13701319M 684 739 478 430 415 314 42 480 567 456 457 608 262 25 11 16

TA 18/18701321M 684 739 478 557 415 314 42 607 694 583 457 608 262 25 11 16


157

FAN CASES with CENTRIFUGAL FAN series UPE/T

code A B C D E F J L M Weight

UPE/T 7/7 554 710 483 232 222 92 30 - - 43

UPE/T 9/9 605 800 554 300 260 96 30 - - 52

UPE/T 10/10 710 850 605 333 289 94 30 - - 66

UPE/T 12/12 775 950 675 396 341 82 30 - - 88

UPE/T 15/15 950 1018 775 473 403 88 30 - - 108

UPE/T 18/18 1018 1250 900 556 479 80 30 - - 147

UPE/T 20/20 1250 1350 1140 630 630 137 30 1510 80 270

UPE/T 25/25 1500 1600 1350 796 800 122 30 1760 80 350

technical features:

Fan cases made with aluminium corners, zinc stainless steel simple walls and insulated panels with soundproof material. Centrifugal fan with double aspiration, forward blades, single or three phase motors, transmission made with trapezoidal pulleys and belts.

N.B. - On demand works with special fans can be made.

158

model A B C D E F G H I L

EP-BT 85 46 43 85 85 70 70 39 64 125 128

EP-BT 98 46 46 92 92 71 71 61 83 159 163

EP-BT 108 69 63 115 110 95 89 70 83 170 185

EP-BT 133 90 90 133 133 112 112 65 113 201 208

EP-BT 146 90 90 133 133 112 112 93 113 248 252

EP-BT 160M 113 113 160 160 138 138 115 134 300 293

EP-BT 160S 123 113 170 160 149 138 115 134 300 293

EP-BT 200 135 135 190 190 164 164 141 168 373 333

EP-BT 240 162 173 222 233 194 205 160 187 438 400

EP-BT 280 202 193 262 253 234 225 193 225 513 465

LOW TEMPERATURE CENTRIFUGAL ELECTRIC FANS EP-BT

suitable to convey clean air or smoke with maximum temperature of 60°C

159

Industrial ventilationHEIG TEMPERATURE CENTRIFUGAL ELECTIC FANS EP-AT

model A B C D E F G H I L M

EP-AT 108 69 63 115 110 95 89 70 80 170 185 50

EP-AT 133 90 90 133 133 112 112 65 120 201 208 50

EP-AT 146 90 90 133 133 112 112 93 120 248 252 50

EP-AT 160M 113 113 160 160 138 138 115 150 300 293 50

EP-AT 160S 123 113 170 160 149 138 115 150 300 293 50

EP-AT 200 135 135 190 190 164 164 141 180 373 333 50

EP-AT 240 162 173 222 233 194 205 160 200 438 400 50

EP-AT 280 202 193 262 253 234 225 193 220 513 465 50

suitable to convey clean air or smoke with maximum temperatureof 180°C

160

code A B C D E F G H I L M N O P

EP-AP16 46 46 70 70 90 90 85 55 190 210 240 108 105 100

EP-AP20 69 63 95 95 115 115 115 80 213 255 300 135 130 130

EP-AP24 69 63 95 95 115 115 115 80 213 317 370 175 160 145

EP-AP24S 69 63 95 95 115 115 115 80 269 317 370 175 160 145

EP-AP28 82 82 105 105 125 125 115 85 274 388 438 222 194 168

EP-AP31 82 82 105 105 125 125 115 85 300 388 438 222 194 168

EP-AP38 89 89 115 115 135 135 137 96 330 505 541 251 245 235

EP-AP40 89 89 115 115 135 135 137 96 330 505 541 251 245 235

CENTRIFUGAL ELECTRIC FANS EP–AP

code EP-AP16 EP-AP20 EP-AP24 EP-AP24S EP-AP28 EP-AP31 EP-AP38 EP-AP40

HP.W.

0.0859

0.20147

0.25184

0.50368

0.75552

1736

21472

32208

Rpm 2800

Three phase motor 230/380V. 50Hz.

Centrifugal electric fan with simple aspiration, painted stainless steel, mouthpiece with protection metal guard. Suitable to convey clean air with maximum temperature of 60°C.

CHARTS OF FEATURES


161

CENTRIFUGAL ELECTRIC FANS EP-BT/EP-AT

technical features:

modelEP-BT

85EP-BT

98

EP-BT-AT108

EP-BT-AT133

EP-BT-AT146

EP-BT-AT

160M

EP-BT-AT

160S

EP-BT-AT200

EP-BT-AT240

EP-BT-AT280

HP.W.

0.0215

0.1290

0.1290

0.25180

0.25180

0.5368

0.75552

1.51104

32208 -

rpm 2800 2800 2800 2800 2800 2800 2800 2800 2800 -

HP.W. - - - 0.25

1800.25180

0.25180

0.25180

0.33243

0.75552

1.51104

rpm - - - 1400 1400 1400 1400 1400 1400 1400

HP.W. - - - - - - - - 0.25

1840.5368

rpm - - - - - - - - 900 900

N.B. – on demand they can be supplied with different performances.

162

code rpmN°

polesAmp. Watt

Air flow rate m³h. min. max.

Pressure max.mm H²O

EPBTS146/P4 1400 4 0.75 25 80 240 9.25

EPBTS146/P2 2800 2 0.60 100 160 480 37

CENTRIFUGAL ELECTRIC FAN 2 and 4 POLES EP-BTS 146/P

Single Phase motor 220 V. 50 Hz.

163

Industrial ventilationCENTRIFUGAL ELECTRIC FAN 2 and 4 POLES EP-BTS 146/I

codeN°

polesAmp. Watt

Air flow rate m³ h. min. max.

Pressure max.mm H²O

EPBTS146/I4 4 0.75 25 80 240 9.25

EPBTS146/I2 2 0.60 100 160 480 37

code rpm AxA BxB CxC D E F G H I L M N O P

EPBTS146/I4 1400 135 115 89 7 127 95 32 208 96 112 203 90 113 65

EPBTS146/I2 2800 135 115 89 7 135 95 40 208 96 112 203 90 113 65

Single Phase motor 220 V. 50 Hz.

164

PREVALENCES CHARTS EP-BTS 146/P

PREVALENCES CHARTS EP-BTS 146/I


165

Helicoidal electric fans with mouthpiece, conveyor, motor support and protection guard.

Impeller with six blades for mod.EV-6

Impeller with four blades for mod.EV-4;

HELICOIDAL ELECTRIC FANS EV-6 - EV-4

modelEV-6 EV-4260

EV-6 EV-4310

EV-6 EV-4360

EV-6 EV-4410

EV-6 EV-4460

EV-6 EV-4510

EV-6 EV-4560

EV-6 EV-4610

A 350 400 450 500 550 600 680 730

B 300 350 400 450 500 550 630 680

C 65 65 65 65 65 65 65 65

D 15 15 15 15 15 15 15 15

EV -

6

HP.W.

0.18130

0.18130

0.25184

0.33243

0.5368

0.75552

1736

1.51104

rpm 1400 1400 1400 1400 1400 1400 1400 1400

HP.W. - - 0.25

1840.25184

0.25184

0.25184

0.33243

0.5368

rpm - - 900 900 900 900 900 900

EV -

4

HP.W.

0.18130

0.18130

0.18130

0.25184

0.33243

0.5368

0.75552

1736

rpm 1400 1400 1400 1400 1400 1400 1400 1400

HP.W. - - 0.25

1840.25184

0.25184

0.25184

0.25184

0.33243

rpm - - 900 900 900 900 900 900

166

Three phase motor

CENTRIFUGAL ELECTRIC FANS with QUADRUPLE ASPIRATION EP-DAD

EPDAD… 108 133 146 160M 160S 200 200 240 240 280 280

A 200 200 200 200 200 280 280 320 320 400 400

B 180 320 320 360 360 290 290 340 290 355 340

C 580 720 720 760 760 850 850 980 930 1155 1140

D 170 201 248 300 300 373 373 438 438 513 513

E 185 208 252 293 293 333 333 400 400 465 465

F 63 90 90 113 113 135 135 173 173 193 193Rpm Hp2800 W

0.33243

0.5368

0.75552

21472

32208

- - - - - -

Rpm Hp1400 W - - - - - 1.5

1104 - 32208 - 5.5

4048 -

Rpm Hp900 W - - - - - - 0.75

552 - 1736 - 2

1472

FEATURES CHARTS

167


code description

EPDAS160/I-BIT/2P centrifugal electric fan, 2 poles, double aspiration

CENTRIFUGAL ELECTRIC FAN EP-DAS 160

FEATURES CHARTS

Centrifugal electric fan with two closed motors, double aspiration, suitable to convey clean air or smoke with maximum temperature of 60°C.

168

code description

EP DAS180/I-BIT/2P CENTRIFUGAL ELECTRIC FAN 2 poles double aspiration

CENTRIFUGAL ELECTRIC FAN EP-DAS 180

Centrifugal electric fan with two closed motors, double aspiration, suitable to convey clean air or smoke with maximum temperature of 60°C.

FEATURES CHARTS


169

INDUSTRIAL FANS for CORROSIVE FLUIDSMADE of PLASTIC MATERIAL

TipoMot.Gr

SizeMotKw

GiriRpm

A B CØD

E F G H I L N P Q R S

P204P202

6363

0.120.18

13702750 140 180 40 160 150 138 60 250 150 190

195 200 100 140 235 11

P224P222

6363

0.120.25

13702800 183 228 40 200 180 170 80 310 190 190

210 255 100 140 290 11

P254P252

6371

0.120.37

13702800 183 228 40 200 180 170 80 310 190 190

210 255 100 140 290 11

P284P282

6380

0.180.75

13702850 208 255 40 225 190 190 80 350 210 190

230 277 120 190 320 11

P316P314P312

717190

0.180.251.50

93014002870

240 280 40 250 200 210 80 410 230210210245

320 150 230 355 11

P356P354P352

717190

0.180.372.20

93014002870

260 312 40 280 220 230 80 445 270210210270

350 150 230 385 11

P406P404P402

7180112

0.250.555.50

92014102850

290 352 40 315 240 264 80 495 295210230356

330 170 250 370 11

P456P454

8090

0.371.10

9201410 324 392 40 355 265 290 80 550 330 230

245 370 170 250 410 11

P452 100 3.0 2860 324 392 40 355 265 290 80 550 330 310 370 170 250 410 11

FAN CASING: moulded, no welded in the following materials: PP- PPS- PPel- PE PEes - PEelIMPELLER: with reversed blades completely moulded in the following materials: PP – PPS- PPel - PVDFMOTOR SUPPORT: stainless steel sheet metal with epoxy paint or inoxMOTOR: B5 operating 5 – screws: in stainless steel inox

170

HELICOIDAL IN-TUBE ELECTRIC FANS EVI D – T - S

171

Industrial ventilationPREVALENCES CHARTS

172

Technical features:Fans of the system mixvent are very silent thanks to their tubular mixed flow configuration and aerodynamic design of their impeller; they can also give very good aerotechnical performances.All the series has a double speed: motors are single phase 230V 50 Hz and thermally protected with a fuse.Insulation class “IP44”.Speed can be adjusted through electronic regulator or electro-mechanical commutator.

MIXED FLOW DUCT FANS for CHANNEL series MIXVENT TD

code rpmW.abs

A. m³/h.temp max

°C.dB.A

WeightKg.

TD-160/100N 25002100

3523

0.250.15

160130

4040

1814 1.4

TD-250/100 18801475

3926

0.260.18

250185

4040

2823 2.0

TD-350/125 22101900

5640

0.370.26

360300

4040

3026 2.0

TD-500/150 25001850

6850

0.300.22

535400

6060

4133 2.7

TD-800/200N 27002100

8070

0.350.30

907700

6060

4136 4.9

TD-800/200 24502040

12896

0.550.41

880665

6060

4537 4.9

TD-1000/250 28002100

15585

0.650.39

1010850

6060

4943 9.4

TD-1300/250 25201990

170110

0.720.48

1300950

6060

4944 9.4

TD-2000/315 2760 350200

1.300.90

19901510

6060

5250 14.0


173

MIXED FLOW DUCT FANS for CHANNEL series MIXVENT TD

code X A Ø B C Ø D E F G H

TD-160/100N - - - - - - - - -

TD-250/100 188 303 176 115 97 100 90 80 60

TD-350/125 188 258 176 115 123 100 90 80 60

TD-500/150 212 295 200 127 157 112 130 80 60

TD-800/200N 232.5 302 217 141 198 124 140 100 94

TD-800/200 232.5 302 217 141 198 124 140 100 94

TD-1000/250 291 386 272 192 248 155 168 145 140

TD-1300/250 291 386 272 192 248 155 168 145 140

TD-2000/315 356 450 336 224 312 188 210 182 178

174

Manufactured in RAL 9006 painted steel (also available in other colours), it is ideal for extracting fumes, dust, shavings, cuttings, and hair.The absorber extracts pollutants or waste materials and deposits them in the appropriate container in order to eliminate the effects generated by producing them.Thanks to its dimensions and weight, and the trolley for transporting it, the PA is extremely manageable. A flexible tube can be used to reach the desired point with the minimum of effort, and the plastic container can be removed easily.The advantage over traditional dust or fume extractors lies in the structure of the extractor fan, which enables the PA to operate without filters. This means that its efficiency is constant and there is no need to clean the filter to obtain a correct operation.The recommended method for extracting acrid fumes, or dust that is easily dispersed in the atmosphere, is to absorb them in a quantity of water inside the container. This ensures that the air is not contaminated with unpleasant odours, and prevents the dust from being dispersed by the air movements.Ideal for welding stations or operations, machinery that produce emissions, odours, gases, and fumes, carpentry workshops, paint-shops, paper based packaging companies, hairdressers, shearers and similar applications.

EXAUST FAN FOR SMOKES, CHIPS AND SLAGS PA 180

Technical features

Dimensions Height: 87 cm m depth: 60 cm width: 40 cm

MOTORB3B5 kw 0,25 2 poles – Single phase (with capacitor) / Three phase

Switch ON / OFFElectrical wire 130 cm + Plug

Aspirator(completely in steel painted

with epossidic powder )

Screw: CB42Impeller with open blade: diameter 180 mm

Motor disc supportForced + induced connection

Motor supporttray and countergrid with inside air filter

Structure of support Steel painted with epossidic powder RAL 9006

Handle Double grip in black plastic with cable hooks

Tube Series Euroflex Dn 102 Length 150 cm final coupling in steel

175

Industrial ventilationACCESSORIES

ON DEMAND PARTICULAR CONSTRUCTIONS, ACCESSORIESAND SPARE PARTS CAN BE SUPPLIED

FOR GENERAL VENTILATION

176

ORIENTATION CHART for AXIAL and RADIAL FANS


177

code package mm.

ST110x66/35 35 x 110

ST110x66/40 40 x 110

ST110x66/50 50 x 110

ST110x66/60 60 x 110

RE-WINDING STATORS for MOTORS OF SLICING MACHINES

Technical features:Voltage : 220V.Connections: yellow-yellow=capacitor blue-blue = line

industrial ventilation - raem srlraemsrl.it/pdf/04_industrial_ventilation.pdfindustrial ventilation...

Documents