industrial ventilation solutions - acurtech · • process ventilation • in-line duct booster •...
TRANSCRIPT
INDUSTRIAL VENTILATION SOLUTIONS
Direct Drive Panel Fan EDP-D-003
www.eldridgefan.com
DIRECT DRIVE EDP PANEL FAN
• Spark resistant cast aluminum airfoil axial impeller • Aerodynamically efficient performance • Factory set adjustable pitch blades • Heavy duty welded steel construction • Simple maintenance - no belts or pulleys • TEFC industrial duty motor • Broad range of static pressures available • Sizes range from 12” to 60” • Direct drive capacities to 57,200 cfm
• Epoxy or polyurethane coatings • Motor side guard • Mounting boot - interior or exterior
mount • Motor operated shutters
• Propeller side guard • Weather hood complete with bird
screen • Gravity shutters • 304 stainless steel construction
• Special duty motors available • Bird screen for shutters • 316 stainless steel construction • Reverse flow construction
• Power plant ventilation • Foundry ventilation
• Factory ventilation • Warehouse ventilation
• General ventilation • Parking garage ventilation
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Belt Drive Panel Fan EBP-E-003
www.eldridgefan.com
BELT DRIVE PANEL FAN
• Spark resistant cast aluminum airfoil axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient performance • Heavy duty welded steel frame and panel construction • Air dried enamel paint finish • TEFC industrial duty motor • Self-aligning pillow block ball bearings • V-belt drives for low speed operation • Sizes range from 24” to 72” • Belt drive capacities to 73,200 cfm
• Epoxy or polyurethane coatings • Motor side guard • Mounting boot - interior or exterior
mount • Motor operated shutters
• Propeller side guard • Weather hood complete with bird
screen • Gravity shutters • Variable pitch sheaves
• Explosion proof & special duty motors • Bird screen for shutters • Reverse flow construction • AMCA spark resistant construction
• Power plant ventilation • Foundry ventilation
• Factory ventilation • Warehouse ventilation
• General ventilation • Parking garage ventilation
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Direct Drive Panel Fan EPK-E-002
www.eldridgefan.com
DIRECT DRIVE EPK PANEL FAN
• GRP (polypropylene) blades • Cast aluminum airfoil axial impeller available • Unit can be built for supply or exhaust configurations • Baked polyester powder coat finish • Sizes range from 12” to 36” • Direct drive capacities to 23,000 cfm • Stock components
• Inlet & outlet guards • Motorized & gravity shutters
• Filter cabinet • Reverse flow • Mounting boot
• Bird screen for shutters and weather hood
• General ventilation • Warehouse ventilation
• Industrial ventilation • Retrofit or replacement
• OEM • New construction
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Direct Drive Filtered Air Fan EDF-E-002
www.eldridgefan.com
DIRECT DRIVE FILTERED AIR FAN
• Rugged cast aluminum impeller • OSHA style propeller guard • Removable filter box section • TEFC or explosion-proof motors, single or three phase • Disposable 2” filters are high capacity, pleated type that meet
MERV 8 rating
• Inlet weatherhood • Coatings for harsh environments
• Unducted paint booths • OEM machinery and equipment • Electrical cabinets
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Packaged Panel Fan EIP-E-002
www.eldridgefan.com
PACKAGED PANEL FAN
• Can be used with exhaust or intake fans • Heavy gauge fan and shutter mounting box, factory mounted • Three types of shutters available:
• All aluminum gravity shutter for exhaust • Motor operated shutter for exhaust • Motor operated center pivoted for either supply or reversible
operation • OSHA compliant rear box guard:
• 12, 16, 18, 20 & 54 inch sizes are fabricated expanded metal • 24, 30, 36, 42, 48 & 60 inch sizes are formed wire five piece
guards
• Exterior weather hood recommended for intake
• Designed for use with Industrial Direct Drive Panel Fans • Simplify mounting in block, concrete, or metal walls • Use as an optional weather hood with bird screen
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Direct Drive Flange Fan EFK-E-001
www.eldridgefan.com
DIRECT DRIVE FLANGE FAN
• GRP (polypropylene) blades • Cast aluminum airfoil axial impeller available • Heavy gauge steel • Unit can be built for supply or exhaust configurations • Baked polyester powder coat finish • Sizes range from 12” to 42” • Direct drive capacities to 40,000 cfm • Stock components
• Special coatings • Propeller side guard • Housing yoke with mounting bracket
• Mounting panel • Motor side guard • Special duty motors available
• E-Hive hood • Reverse flow construction • AMCA spark resistant construction
• General ventilation • OEM applications
• Circulation / recirculation units • Renewable energy
• Industrial drying • Marine / shipboard applications
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Hooded Roof Ventilator EDR-E-002
www.eldridgefan.com
HOODED ROOF VENTILATOR
• Supply or exhaust applications • Direct drive or belt drive arrangements • Spark resistant, cast aluminum airfoil axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient performance • Heavy duty welded steel base • Air dried enamel paint finish • Aluminum hood with birdscreen • TEFC industrial duty motor • Direct drive units are easily maintained – no belts or pulleys • Belt drive units have self-aligning pillow block bearings • Belt drive units use v-belt drive for low speed operation
• Filtered intake unit • 2” thick disposable filters, for filtered
intake unit • Gravity shutter for exhaust only • Variable pitch sheaves for easy &
accurate adjustment
• Pre-fabricated roof curbs • Disconnect switch - mounted, or
mounted & wired • Epoxy or polyurethane coatings • Motor operated damper for supply or
exhaust applications
• Custom curb panel to match existing curb
• Explosion proof & special duty motors
• General ventilation • Fume and smoke exhaust
• Make-up air • Filtered air supply
• Heat exhaust
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Direct Drive Upblast Roof Exhaust Ventilator EDU-E-002
www.eldridgefan.com
DIRECT DRIVE UPBLAST ROOF EXHAUST VENTILATOR
• Low silhouette weatherproof closure for vertical air discharge
• Direct drive, low maintenance • Spark resistant, cast aluminum airfoil
axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient
performance
• TEFC industrial duty motor • Weather-tight steel curb panel • Heavy duty welded steel construction • Air dried enamel paint finish • Rugged galvanized damper section
with butterfly damper blades • Damper rods turn in nylon bearings
and require no lubrication
• Epoxy or polyurethane coatings • Disconnect switches, mounted or
mounted & wired • Pre-fabricated roof curbs
• Hot dipped galvanized construction • Explosion proof motors • 304 or 316 stainless steel construction • Special duty motors
• Magnetic damper pads for positive closure
• General ventilation • Exhaust or smoke fumes
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Belt Drive Upblast Roof Exhaust Ventilator EBU-E-002
www.eldridgefan.com
BELT DRIVE UPBLAST ROOF EXHAUST VENTILATOR
• Low silhouette weatherproof closure for vertical air discharge • V-belt drive for low speed operation • Spark resistant, cast aluminum airfoil axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient performance • TEFC industrial duty motor • Self-aligning pillow block ball bearings • Weather-tight steel curb panel • Heavy duty welded steel construction • Air dried enamel paint finish • Rugged galvanized damper section with butterfly damper
blades • Damper rods turn in nylon bearings and require no
lubrication
• Epoxy or polyurethane coatings • Disconnect switches, mounted or mounted & wired • Pre-fabricated roof curbs • Hot dipped galvanized construction • Explosion proof motors • 304 or 316 stainless steel construction • Special duty motors • Magnetic damper pads for positive closure
• General ventilation • Exhaust or smoke fumes
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Belt Drive Roof Exhaust Ventilator w/ Exterior Motor EBV-E-002
www.eldridgefan.com
BELT DRIVE ROOF EXHAUST VENTILATOR W/ EXTERIOR MOTOR
• Standard upblast weatherproof closure for vertical air discharge
• V-belt drive for low speed operation • Spark resistant, cast aluminum airfoil
axial impeller • Factory set adjustable pitch blades • TEFC motor located outside of
airstream • Adjustable motor base with self-
aligning pillow block ball bearings
• Completely sealed belt tube to protect V-belt drive
• Extended lube lines • Heavy duty welded steel construction • Weather-tight steel curb panel • Air dried enamel paint finish • Rugged galvanized damper section
with butterfly damper blades • Damper rods turn in nylon bearings
and require no lubrication
• Epoxy or polyurethane coatings • Disconnect switches, mounted or
mounted & wired • Pre-fabricated roof curbs
• Hot dipped galvanized construction • Explosion proof motors • 304 or 316 stainless steel construction • Special duty motors
• Magnetic damper pads for positive closure
• General ventilation • Exhaust or smoke fumes
• Moisture laden air • Mild contaminates in the air stream
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Direct Drive Tubeaxial Fan EDT-E-002
www.eldridgefan.com
DIRECT DRIVE TUBEAXIAL FAN
• Simple maintenance - no belts or pulleys
• Spark resistant, cast aluminum airfoil axial impeller
• Factory set adjustable pitch blades • Aerodynamically efficient
performance
• Heavy duty welded steel and angle ring construction
• Baked polyester powder coat finish • Mountable in ductwork in any position • TEFC industrial duty motor • Sizes range from 12” to 60” • Direct drive capacities to 61,000 cfm
• Horizontal mounting brackets • Motor side guard • Externally mounted and wired
junction box • Vertical mounting brackets • Propellor side guard
• 304 or 316 stainless steel construction • Mounting legs • Inspection door • Explosion proof and special duty
motors • Companion flanges
• Reverse flow construction • Baked epoxy powder coat finish, two
layers
• Process Ventilation • In-line duct booster
• General ventilation • Fumes, dust, or smoke removal
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Belt Drive Tubeaxial Fan EBT-E-002
www.eldridgefan.com
BELT DRIVE TUBEAXIAL FAN
• Spark resistant, cast aluminum airfoil axial impeller
• Factory set adjustable pitch blades • Heavy duty welded steel and angle
ring construction • Baked polyester powder coat finish • Mountable in ductwork in any
position
• TEFC industrial duty motor; motor located outside of air stream
• Self-aligning pillow block ball bearings
• V-belt drives for low speed operation • Completely sealed belt tube protects
sheaves and belts from air stream • Extended lube lines • Shaft seal & water slinger
• Horizontal mounting brackets • Propeller side guard • 304 or 316 stainless steel construction • Vertical mounting brackets • Motor side guard • Maximum 375 F construction
• Mounting legs • Inspection door • Explosion proof & special duty motors • Companion flanges • Reverse flow construction • Motor cover and/or belt guard
• Variable pitch sheaves • AMCA spark resistant construction • Baked epoxy powder coat finish, two
layers
• Process ventilation • In-line duct booster
• Fumes, dust or smoke removal • General ventilation
• Moisture laden air • Contaminated air steams
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Direct Drive In-Line Fan EID-A-001
www.eldridgefan.com
DIRECT DRIVE IN-LINE FAN
• Simple maintenance - no belts or pulleys
• Spark resistant, cast aluminum airfoil axial impeller
• Factory set adjustable pitch blades • Aerodynamically efficient
performance
• Heavy duty welded steel construction • Baked polyester powder coat finish • Mountable in ductwork in any position • TEFC industrial duty motor • Extended motor leads to external
junction box • Sizes range from 12” to 27”
• Horizontal mounting brackets • Fan guards • Vertical mounting brackets • Propellor side guard
• 304 or 316 stainless steel construction • Mounting legs • Inspection door
• Explosion proof and special duty motors
• Companion flanges • Reverse flow construction
• Process Ventilation • In-line duct booster
• General ventilation • Fumes, dust, or smoke removal
• OEM Applications
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
*DIMENSIONS IN INCHES
MODEL A B C L T MAX MTR FRAME
EID12 12.2 13.8 15.0 18.0 0.075 143/5TEID14 14.2 16.3 17.5 20.0 0.075 143/5TEID16 16.2 18.0 19.5 21.0 0.075 143/5TEID18 18.2 20.8 22.0 24.0 0.105 143/5TEID21 21.2 23.3 24.5 26.0 0.105 182/4TEID24 24.2 26.3 27.5 29.0 0.105 182/4TEID27 27.2 29.3 31.0 29.0 0.105 182/4T*DO NOT USE FOR CONSTRUCTION CONSULT FACTORY FOR CERTIFIED PRINTS
AIRFLOW PERFORMANCE (CFM)
MODEL MINIMUM MAXIMUM
EID12 500 2,600EID14 800 4,200EID16 900 5,600EID18 1,600 6,800EID21 1,600 7,000EID24 2,800 9,000EID27 3,400 11,400
Centrifugal In-Line Fan ECI-E-002
www.eldridgefan.com
CENTRIFUGAL IN-LINE FAN
• Backward curved airfoil (BCA) impeller • Non-overloading power characteristics • Super quiet, highly efficient performance • Rugged polyester powder coat finish • Custom mounting arrangements available • External junction box • Standard NEMA motors • Sizes range from 12” to 24”; capacities to 4,258 cfm
• Mounting feet • Motor side guard
• Explosion proof motors • Impeller side guard
• Inspection door • Special duty motors
• Process ventilation • Cabinet cooling • General ventilation
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Mixed Flow In-Line Fan EMF-E-002
www.eldridgefan.com
MIXED FLOW IN-LINE FAN
• High capacity mixed flow impellers • Standard NEMA motors • Baked polyester powder coat finish • Custom mounting arrangements
available
• External junction box • Sizes range from 12” to 24”; capacities
to 5,340 cfm
• Mounting feet • Motor side guard
• Explosion proof motors • Inspection door
• Impeller side guard • Special duty motors
• Process ventilation • Cabinet cooling • OEM applications
FEATURES & BENEFITS
APPLICATIONS
ACCESSORIES & OPTIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Cast Aluminum Pressure Blower - 1EPB-E-002
www.eldridgefan.com
CAST ALUMINUM PRESSURE BLOWER
• Cast aluminum radial blade wheel • Designed for highly efficient
performance • Spark resistant construction • Rugged cast aluminum housing • Circular inlet and outlet collars • Single of three phase TEFC motors
• CW or CCW rotation available; please specify
• Discharge rotatable to four positions • Suitable for 0-150ºF • Static pressures up to 11” w.g. • Capacities up to 3,410 cfm
• Flexible hose • Nozzle • Teflon shaft seal for corrosive
environments • Slide gate damper
• Explosion proof and special duty motors
• Inlet and outlet guard • Protective coating • Flanged inlet and outlet
• Vehicle exhaust • Exhausting smoke, fumes, and dust
from high pressure applications • Air knives
• Dust collection and material conveying
• Combustion air • High pressure cooling and drying
FEATURES & BENEFITS
APPLICATIONS
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
ACCESSORIES & OPTIONS
Cast Aluminum Pressure Blower - 2EPB-E-002
www.eldridgefan.com
CAST ALUMINUM PRESSURE BLOWER
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
Industrial Ventilation Solutions IVS-E-002
WE PUT CREATIVE THOUGHT INTO VENTILATION
9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200
Toll-free: +1 844-780-7200
www.eldridgefan.com