information required to manufacture geared … · 1.fill in open dimensions in sketch below....

PITCH OF HOIST ROPES (C.L. TO C.L. OF GROOVES ON FACE OF TRACTION SHEAVE): ____________

BEAM / CHANNEL SIZE: ______" HIGH x ______" WIDE

IS FLOOR SLAB EXISTING?

ABOVE THE MACHINE BEAMS

MOTOR POWER SUPPLY: ____________ VOLTAGE

HOIST ROPES: QUANTITY ______ SIZE __________

FLOOR SLAB THICKNESS: ____________

BEAM SPACING (SEE SKETCH "B" - DIM. "BA", "BB" & "BC")

PITCH OF HOIST ROPES: ___________

CAR SPEED: ________________________

(H-W STANDARD PITCH IS: ROPE DIAMETER + 1/4")

FOR RETAINED MOTORS WITH NEW CONTROLLERS, FILL IN DIMENSIONS ON ENCLOSED BULLETIN #1109 AND:

HOIST ROPES: QUANTITY ____________ SIZE ____________

HAND OF MACHINE:

CAPACITY: _________________________

ROPING:

DO YOU HAVE AN EXISTING DEFLECTOR SHEAVE:

IF NOT, WHAT DIAMETER TRACTION SHEAVE IS REQUIRED: ______________

IF DEFLECTOR MOUNTING IN MACHINE ROOM SEE ATTACHED SURVEY E-147

DO THE HOIST ROPES DROP STRAIGHT DOWN TO THE CAR HITCH

AS SHOWN IN SKETCH "A"?

PROVIDE THE CAR TO CWT. ROPE DROP DISTANCE: ______________

(SEE SKETCH "A" - DIM. "AA")"AA"

EMPTY CAR WEIGHT: ________________

"BA" "BB" "BC"

BEAM SPACING (SEE SKETCH "B" - DIM. "BA", "BB" & "BC")

ENGINEERING INFORMATION:WE REQUIRE ALL MARKED ITEMSAND FILL IN ANY BLANK FIELDSASSOCIATED WITH THOSE ITEMS

GEARED MACHINES-OVERHEAD APPLICATION

SHEAVES

MACHINE ISOLATION

TRAVEL: ____________

ASME A17 CODE COMPLIANCE TO WHICH YEAR REVISION: ___________

PRE 2013 CODE SEISMIC ZONE:

SKETCH "A"

SKETCH "B"


ROPETO CAR

ROPETO CWT.

FORM: E-112-OH

Quincy, IL 62305Phone: 217-222-0466

#1 Hollister-Whitney [email protected]

www.hollisterwhitney.com

Fax: [email protected]

[email protected]

ENGINEERING CONTACT: ____________________________

COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

INFORMATION REQUIRED TO MANUFACTURE

GEARED OVERHEAD MACHINES

1:1 2:1

LEFT RIGHT

1 2A 2B 3 4

YES NO

YES NO

YES NO

YES NO

NEW CONTROLLER OR RETAIN EXISTING? NEW RETAINED. IF RETAINED, PROVIDE:

EXISTING MOTOR TYPE:

EXISTING MOTOR HP: ___________

EXISTING MOTOR RPM: ___________

A/C VVVF A/C SINGLE SPEED D/C

FOR NEW MOTORS BY OTHERS (NOT H-W), PROVIDE CERTIFIED OUTLINE DIMENSION PRINTS OF MOTOR (INCLUDE FULL LOAD R.P.M.)

EXISTING MOTOR TYPE:

EXISTING MOTOR HP: ___________

EXISTING MOTOR RPM: ___________

A/C VVVF A/C SINGLE SPEED D/C

A/C 2-SPEED

A/C 2-SPEED

12-2019

CAR TO CWT.ROPE DROPDISTANCE

MACHINE ROOM

FLOOR

TO NEAREST

OBSTRUCTION

REQ'D CLEARANCE FOR

REMOVAL OF GEAR CASE

CWT. ROPE DROPTO MACHINE ROOMWALL (ABOVE)

SLIP-FIT

SHAFT

REQUIRED

CAR ROPE DROPTO MACHINE ROOMWALL (ABOVE)

MACHINE BEAMS

(BY ELEVATOR

CONTRACTOR)

ROPE

GRIPPER

INSTRUCTIONS:

1. FILL IN OPEN DIMENSIONS IN SKETCH BELOW.

2. EMPTY CAR WEIGHT: ____________

3. PROVIDE MACHINE ROOM PLAN SKETCH.a. SHOW LOCATION OF CAR AND CWT. RAILS.b. PROVIDE MACHINE BEAM SPACING LOCATING CENTERLINE SHEAVE TO

CENTERLINE OF MACHINE BEAMS.c. MACHINE BEAM SIZE _________HIGH x ________WIDE

APPROX. HEIGHTS REQ'DFOR SUB-BASE + MACHINE:

#34 = 6'-3 7/8"#44 = 6'-5 1/2"#54 = 7'-0 5/8"#64 = 8'-0 1/2"#74 = 9'-2 3/4"


GEARED MACHINE BLOCK-UP ASSEMBLY

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

FORM: E-147-1




ENCODER CABLE LENGTH (STANDARD IS 20 METER [65.6'] ): ___________

MACHINE POWER SUPPLY: ____________ VOLTAGE

CAR SPEED: ________________________

HOIST ROPES: QUANTITY ___________ SIZE ____________

CAPACITY: _________________________

ARE YOU RETAINING AN EXISTING DEFLECTOR SHEAVE:

IF NOT, WHAT DIAMETER TRACTION SHEAVE IS REQUIRED:

TRAVEL: ___________________________

CONTROLLER MANUFACTURER: ___________

IS MANUAL BRAKE RELEASE CABLE REQUIRED?

(IF USING G.A.L. CONTROL, CONFIRM WITH THEM IF BRAKE RELEASE CABLE IS REQUIRED)

"AA"

DRIVE MANUFACTURER: KEB MAGNETEK OTHER (CABLE BY CUSTOMER)

"BA" "BB" "BC"

GEARLESS MACHINES-OVERHEAD APPLICATION

MACHINE ISOLATION


SKETCH "A"

SKETCH "B"


FLOOR SLAB THICKNESS: _____________

BEAM SPACING (SEE SKETCH "B" - DIMENSION "BA", "BB" & "BC")

HOIST ROPES: QUANTITY ______ SIZE __________

BEAM SPACING (SEE SKETCH "B" - DIMENSION "BA", "BB" & "BC")

PITCH OF HOIST ROPES: ___________

IF DEFLECTOR MOUNTING IN MACHINE ROOM SEE ATTACHED SURVEY E-147

SHEAVES

PROVIDE THE CAR TO CWT. ROPE DROP DISTANCE (SEE SKETCH "A" - DIM "AA"): _____________

ROPETO CWT.

ROPETO CAR


GEARLESS OVERHEAD MACHINES

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

FORM: E-112-GL-OH

IF SO, SPECIFY LENGTH (STANDARD IS 8'-0"): __________________

ROPING: 1:1 2:1

YES NODIA. __________

15"DIA. 20"DIA. 25"DIA.

YES NO

PRE 2013 CODE SEISMIC ZONE: 1 2A 2B 3 4

ABOVE THE MACHINE BEAMS YES NO

IS FLOOR SLAB EXISTING? YES NO


MACHINE ROOM

FLOOR

TO NEAREST

OBSTRUCTION

SLIP-FIT

SHAFT

REQUIRED

MACHINE BEAMS

(BY ELEVATOR

CONTRACTOR)

CAR TO CWT.ROPE DROPDISTANCE

CWT. ROPE DROPTO MACHINE ROOMWALL (ABOVE)

CAR ROPE DROPTO MACHINE ROOMWALL (ABOVE)

INSTRUCTIONS:

1. FILL IN OPEN DIMENSIONS IN SKETCH BELOW.

2. EMPTY CAR WEIGHT: ____________

3. HAND OF BLOCK-UP ASSEMBLY: LEFT HAND - DEFLECTOR TO LEFT OF MACHINE WHEN LOOKING AT TRACTION SHEAVE (OPPOSITE OF ABOVE) RIGHT HAND - DEFLECTOR TO RIGHT OF MACHINE WHEN LOOKING A AT TRACTION SHEAVE (AS SHOWN ABOVE)

4. PROVIDE MACHINE ROOM PLAN SKETCH.a. SHOW LOCATION OF CAR AND CWT. RAILS.b. PROVIDE MACHINE BEAM SPACING LOCATING CENTERLINE SHEAVE TO

CENTERLINE OF MACHINE BEAMS.c. MACHINE BEAM SIZE _________HIGH x ________WIDE

APPROX. HEIGHTS REQ'DFOR SUB-BASE + MACHINE:

#GL171 = 7'-4"#GL130A = 8'-0"#GL185 = 8'-0"#GL260 = 8'-0"

ROPE GRIPPER


GEARLESS MACHINE BLOCK-UP ASSEMBLY

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

FORM: E-147-2

LEFT RIGHT



MOTOR POWER SUPPLY: ____________ VOLTAGE

CAR SPEED: ________________________


FOR EXISTING MOTORS ONLY, PLEASE FILL IN DIMENSIONS ON ENCLOSED BULLETIN #1109

CERTIFIED OUTLINE DIMENSION PRINTS OF MOTOR WITH FULL LOAD R.P.M. INCLUDED

HOIST ROPES: QUANTITY ____________ SIZE ____________

CAPACITY: _________________________

"BS" BASEMENT MACHINES, WHAT TRACTION SHEAVE DIAMETER IS REQUIRED: ________

"OD" BASEMENT MACHINES, PROVIDE ROPE OFFSET (SEE SKETCH "B" - DIMENSION "BA").

IS ROPE GRIPPER MOUNTING REQUIRED ON THE MACHINE:

(SEE SKETCH "A" - DIMENSION "AA")

GEARED MACHINES-BASEMENT APPLICATION

EMPTY CAR WEIGHT:_________________

TRAVEL: ____________



GEARED BASEMENT SET MACHINES

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

OD MACHINE BASE

BS MACHINE BASE

"AA"

"BA"

SKETCH "A"

SKETCH "B"

ROPE OFFSET(MINIMUM 1.5")

OPTIONAL ROPEGRIPPER MOUNT

OPTIONAL ROPEGRIPPER MOUNT

FORM: E-112-BS

HAND OF MACHINE: LEFT RIGHT

ROPING: 1:1 2:1


YES NO

CAR BEAM / CHANNEL SIZE: __________" HIGH x __________" WIDE

HOIST ROPES: QUANTITY ________________

CAR & CWT BEAM / CHANNEL SPACING :

PITCH OF HOIST ROPES: _________________

"BA" "BB" "CC" "CD"

HOIST ROPES: SIZE _____________________

QUANTITY: CAR SHEAVES _________ CWT. SHEAVES _________

DIAMETER: CAR SHEAVES _________ CWT. SHEAVES _________

SKETCH "C"SKETCH "B"

"BA" "BB" "CC" "CD"


CARSHEAVES

CWTSHEAVES

BEAMS - SKETCH "B" - DIMENSIONS "BA"/ "BB"

CHANNELS - SKETCH "C" - DIMENSIONS "CC"/ "CD"

CWT BEAM / CHANNEL SIZE: __________" HIGH x __________" WIDE

SHEAVES (OVERHEAD/CAR/CWT.)



GEARLESS BASEMENT MACHINES

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

PITCH OF HOIST ROPES (C.L. TO C.L. OF GROOVES ON FACE OF TRACTION SHEAVES): ____________

MACHINE POWER SUPPLY: ____________ VOLTAGE


HOIST ROPES: QUANTITY ___________ SIZE ____________

WHAT TRACTION SHEAVE DIAMETER IS REQUIRED (SEE SKETCH "A" - DIM. "AA") :

CAR BEAM / CHANNEL SIZE: __________" HIGH x __________" WIDE

HOIST ROPES: QUANTITY ________________

CAR & CWT BEAM / CHANNEL SPACING :

PITCH OF HOIST ROPES: _________________

"BA" "BB" "CC" "CD"

HOIST ROPES: SIZE _____________________

QUANTITY: CAR SHEAVES _________ CWT. SHEAVES _________

DIAMETER: CAR SHEAVES _________ CWT. SHEAVES _________

"AA"


SKETCH "A"

SKETCH "C"

GEARLESSMACHINEBS BASE

SKETCH "B"

ENCODER CABLE LENGTH (STANDARD IS 20 METER [65.6'] ): ___________

CONTROLLER MANUFACTURER: ___________

DRIVE MANUFACTURER: KEB MAGNETEK OTHER (CABLE BY CUSTOMER)

"BA" "BB" "CC" "CD"


CARSHEAVES

CWTSHEAVES

BEAMS - SKETCH "B" - DIMENSIONS "BA"/ "BB"

CHANNELS - SKETCH "C" - DIMENSIONS "CC"/ "CD"

20"DIA.

25"DIA.

CWT BEAM / CHANNEL SIZE: __________" HIGH x __________" WIDE

CAPACITY: _________________________

CAR SPEED: ________________________


TRAVEL: ___________________________

GEARLESS MACHINES-BASEMENT APPLICATION

FORM: E-112-GL-BS

SHEAVES (OVERHEAD/CAR/CWT.)

ROPING: 1:1 2:1

IS MANUAL BRAKE RELEASE CABLE REQUIRED?

(IF USING G.A.L. CONTROL, CONFIRM WITH THEM IF BRAKE RELEASE CABLE IS REQUIRED)

IF SO, SPECIFY LENGTH (STANDARD IS 8'-0"): __________________

YES NO



SHOE TYPE: ____________ MANUFACTURER: ____________

RAIL SIZE (IN LBS.): ____________

TEMPLATE (FILL IN ALL DIMENSIONS ON SKETCH "E")

FRONT

TYPE OF EXIST. SAFETY (DRUM, GRADUAL, ETC.): ____________

CAPACITY: ________________________________________

EMPTY CAR WEIGHT: _______________________________

CAR SPEED: ________________________________

CAR SPEED: ______________________________________

GOVERNOR ROPE DIAMETER:

TRIPPING SPEED: ____________________________

STILE SIZE: _______________________________________

FACE TO FACE OF GUIDE RAILS: _____________________

COMPENSATION WEIGHT(IF APPLICABLE): ____________

GOVERNOR LOCATION (SHOW ON SKETCH "D")

RAIL SIZE (IN LBS.): ________________________________

HAND OR LOCATION (SHOW ON SKETCH "D")

GOVERNOR PULL-THRU (IN LBS.): ____________ OR

RAIL SIZE (IN LBS.): ___________________________

DIA.

CAPACITY: __________________________________

EMPTY CAR WEIGHT: _________________________

COMPENSATION WEIGHT (IF APPLICABLE): _______________

OUT-TO-OUT OF HOIST ROPES (SEE SKETCH "F" - DIM. "FF"): ___________

CAR SPEED: _________________________________

"FF"

GOVERNORS

SAFETIES

SHOES AND PLATES

TENSION WEIGHTS

SKETCH "D"

ROPE GRIPPERSSKETCH "E"

SKETCH "F"

HOIST ROPES: QUANTITY ______ SIZE_________

LENGTH OF HYDRAULIC HOSE REQUIRED:

STANDARD (27")


SMALL COMPONENTS


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

Quincy, IL 62305Phone: 217-222-0466




[email protected]

1.00"LIVE SHAFT DIAMETER: 12mm 0.25" 0.75"

FORM: E-112-2

CUSTOM (UP TO 30'-0"): __________

4'-0" 5'-0" 6'-0" 8'-0"

SHEAVE DIAMETER: 12"DIA. 16"DIA.

SHEAVE DIAMETER: 12"DIA. 16"DIA.

ROPING: 1:1 2:1

3/8"DIA. 1/2"DIA.

GOVERNOR ROPE DIAMETER: 3/8"DIA. 1/2"DIA.


02-2020

TENSION WEIGHT TYPE: FRAME SWING

SPRING BUFFERS

CAR: PLEASE PROVIDE -

D.B.G.: __________

RAIL SIZE: __________ (IN LBS.)

CAR WEIGHT: __________

BUFFER HEIGHT: __________

OVERALL HEIGHT: __________

DISTANCE BETWEEN BUFFERS: __________

CWT: PLEASE PROVIDE -

D.B.G.: __________


CWT. WEIGHT: __________



HW PIT CHANNELS NORMALLY MOUNT UNDER THE THE GUIDERAILS OR THEY CAN BE CUT SHORT. ADVISE WHICH OPTION -

NORMAL UNDER RAIL MOUNTING. CUT SHORT OF GUIDE RAILS

OIL BUFFERS

CAR: PLEASE PROVIDE -

D.B.G.: __________


CAR WEIGHT: __________



CWT: PLEASE PROVIDE -

D.B.G.: __________


CWT. WEIGHT: __________



DUTY -

SPEED: _______ CAPACITY: ______


BUFFERS & PIT CHANNELS

DUTY -

SPEED: _______ CAPACITY: ______

HW PIT CHANNELS NORMALLY MOUNT UNDER THE THE GUIDERAILS OR THEY CAN BE CUT SHORT. ADVISE WHICH OPTION -

NORMAL UNDER RAIL MOUNTING. CUT SHORT OF GUIDE RAILS

PIT CHANNELS REQUIRED? CAR CWT

PIT CHANNELS REQUIRED? CAR CWT

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

FORM: E-112-3


WEIGHTS / DUTY

CAR SPEED: _______________________ CAPACITY RATING:__________________ TOTAL EMPTY CAR WEIGHT:________________


1:1 ROPED CAR SLINGS

OVERALL

PLATFORM

THICKNESS

STRIKE PLATE

B-B STILES

WIDE

BOTTOM CHANNELS

UNDER

BEAM

HEIGHT

CLEAR

BETWEEN

CHANNELS

ST

ILE

S:

CROSSHEAD CHANNELS

GUSSET

D.B.G.

HIGH x

WIDEHIGH x

WID

EH

IG

H x

ROPES

EXISTING

HITCH PLATE

DRILLED FOR

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

FORM: E-112-4

LOAD CLASSIFICATION: PASSENGER -OR- CLASS: A B C1 C2 C3


PLATFORM

REQUIRE INFORMATION MARKED BELOW:

TOTAL EMPTY CAR WEIGHT: _______________


SIDE-POST PLATFORMS


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019FORM: E-112-5

IF ALL STEEL PLATFORM, CAR SILL DETAIL IS REQUIRED: _______________

CAPACITY RATING: _______________

LOAD CLASSIFICATION: PASSENGER -OR- CLASS: A B C1 C2 C3

DISTANCE BETWEEN GUIDES (D.B.G.): _______________

BACK TO BACK OF CAR SLING STILES: _______________

NUMBER OF DOOR OPENINGS: _______________

SPEED OF DOOR(S) -

TYPE OF DOOR(S) -

SIZE OF THE DOOR(S) -

LOCATION OF THE DOOR(S) BY FILLING IN THE DIMENSIONS ON ABOVE SKETCH.

"A" DOOR; WIDTH: _______________ BY HEIGHT: ______________

"B" DOOR; WIDTH: _______________ BY HEIGHT: ______________

"A" DOOR;

"B" DOOR;

"A" DOOR;

"B" DOOR;

SINGLE, 2-SPEED, 3-SPEED

SINGLE, 2-SPEED, 3-SPEED

SIDE SLIDE CENTER OPENING

SIDE SLIDE CENTER OPENING


OVERALL

CWT.

DIA.

D.B.G.

FILLER WIDTHTO GUARD

CWT.

FRAME

HEIGHT

#

ROPES

COUNTERWEIGHT WITHOUT SHEAVE

COUNTERWEIGHT WITH SHEAVE

TOTAL

WEIGHT 0F

CWT.

ASSEMBLY

PLUS FILLER

STACK

HITCH PLATE

DRILLED FOR

CWT.

FRAME

HEIGHT

#

TOTAL

WEIGHT 0F

CWT.

ASSEMBLY

PLUS FILLER

STACK

NUMBER AND

SIZE OF ROPES

CENTER TO CENTER

GROOVE PITCH OF


COUNTERWEIGHT FRAMES

D.B.G.

FILLER WIDTHTO GUARD

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

FORM: E-112-6

CWT. RAIL SIZE (IN LBS)

CWT. SHOE MANUFACTURER


PROVIDE OPEN DIMENSIONS ABOVE

1

HW TYPICAL SHAFT DIAMETER FOR HEAVY DUTY DEFLECTOR, CAR, CWT, AND OVERHEAD SHEAVES

IS 3.438" - 3.440. IF YOU REQUIRE A SMALLER DIAMETER FOR YOUR EXISTING CONDITIONS, PROVIDE

YOUR SHAFT DIAMETER IN NEAREST THOUSANDTHS.

1


HANGING SHEAVES

Quincy, IL 62305Phone: 217-222-0466




[email protected]

06-2019


COMPANY: _________________________________________

EMAIL: _____________________________________________

FAX NO: ____________________________________________

JOB NAME: _________________________________________

ELEV. #: ___________________ H-W # : __________________

FROM (H-W):________________________________________

DATE: ______________________________________________

FORM: E-112-7


information required to manufacture geared … · 1.fill in open dimensions in sketch below....

Documents