infrared temp sensor
TRANSCRIPT
-
7/29/2019 Infrared Temp Sensor
1/2
Product Information 29B-071482-1E 1
Infrared temperature sensor
Introduction
This infrared sensor is non-contact, and detects infrared radiation.
The sensor is available in two variants; one suitable for measuring the temperature of a
tyre and the other suitable for measuring the temperature of both steel and carbon fibrebrake disks.
Calibration information for the sensors for these different applications is given on page 2.
The sensors are supplied fitted with a 150mm loom, terminated with an Autosport connec-
tor ASL606-05-PN-HE.
Installation notes
When installing a Infrared temperature sensor:
the minimum sensing distance is 30mm;
the minimum sensing spot size is 6.5mm;
mount the sensor using the fins or the two 3.0mm non-threaded holes in the
base of the sensor;
make sure that the sensor does not interfere with the operation of the brake
mechanism or wheel mounts;
ensure that the sensor loom is not trapped when the suspension moves, or is
stressed at the extremes of steering and suspension movement;
select a position where the sensor will not be in constant contact with water,
fuel or oil;
try not to place the sensor near sources of electrical interference i.e. ignition
coils, plug leads, ECMs, alternators and telemetry antenna.
-
7/29/2019 Infrared Temp Sensor
2/2
2 Product Information 29B-071482-1E
Dimensions
Typical dimensions in millimetres and (inches)
150.00 (6.00)
target
15mm spot
60.00 (2.36) 27.00 (1.06)
3.0mm non-threadedholes, 2 positions
17.00 (0.66)
11.0
0
(0.4
3)
12.0
0
(0.4
7)
Connector details
Specifications
Ordering information
Contact Pi Research for CE information.
Calibration Information01B-601451 Brake Temp IR Sensor - Steel
01B-601451 Brake Temp IR Sensor - Carbon
01B-601450 Tyre Temp IR Sensor
The sensor specific output voltage at the maximum
temperature is shown on the yellow label attached to
the sensor.
Sensor connector Mating Connector
ASL606-05-PN-HE ASL106-05-SN-HE
Pin Function Pin Function
1 +12V 4 Ground
2 Sensor output 5 Ground
3 No connection
Description Value
Supply +5 to +16V
Measurement ranges Ambient to +1000C
Ambient to +150C
Measurement error 1%
Measurement distance 30.0mm to 70.0mm
Spot size 10.0mm at 50.0mm
Weight 50 grams
Environmental IP65
Product Part number
Tyre temperature sensor 01B-601450
Brake temperature sensor 01B-601451
Degs. C Volts Degs.C Volts
0 0.00 600 0.84
100 0.02 700 1.34
200 0.07 800 2.02
300 0.14 900 2.89
400 0.27 1000 4.01
500 0.49
Degs. C Volts Degs. C Volts
0 0.00 600 1.03
100 0.02 700 1.60
200 0.08 800 2.37
300 0.18 900 3.39
400 0.36 1000 4.71
500 0.63
Degs. C Volts Degs. C Volts
0 0.50 100 2.85
20 0.81 120 3.61
40 1.19 140 4.50
60 1.65 150 5.00
80 2.20