ingersoll rand® direct solutions center · rand direct solution center is the option for a...
TRANSCRIPT
The Aerospace Industry has differing requirements from other manufacturing segments worldwide. The requirements can range from speed to torque tolerance to specialty attachments to specialty fasteners that are known only to aerospace industry. Ingersoll Rand Direct Solution Center is the option for a customer when adapting our products to fit their production requirements. The DSC focuses on solving your production requirements with the complete Ingersoll Product offering. Our intent is to customize our standard product, test, calibrate and pre-set the targets before the tool is sent back to you. Whether it is temporary fastener attachment or hi lock attachment, our DSC can offer you a turnkey solution. Additionally, extra FOD protection is available by using Loctite for the fasteners on the tool that is being adapted. Below is an example of a current product offering for a customer according to their standards. Your standards can differ and the DSC can customize according to your standards.
Conditions of Use:1. All tools are ordered and received using the ‘–L10K’ or similar nomenclature suffix from the Ingersoll Rand®
DSC facility in Dallas, TX.2. All tools are programmed, calibrated, validated, tested, and used in production @ 10% tool max speed.3. All tools will be calibrated prior to shipment to Customer by a qualified Ingersoll Rand® technician.4.“Accuracy: ± 10% of set point within the tool range specified” (see note in Working Torque Range box below).
Tool Model(on tool)
Tool Model(as ordered)
Tool SpeedSetting
(% of ToolMAX Speed)
Tool to be calibrated at desired target torque prior to
production use
Working Torque Range[If All Conditions are met]
Accuracy: ± 10% of set pointwithin the tool range specified
for the tools listed below. (inch lbs.)
Minimum Maximum
QXX2PT04PQ4 QXX2PT04PQ4-L10K 10% Yes 4 35
QXC2PT04PQ4 QXC2PT04PQ4-L10K 10% Yes 4 35
QXN2PT04PQ4 QXN2PT04PQ4-L10KCANCB 10% Yes 4 35
QXX2PT18PQ4 QXX2PT18PQ4-L10K 10% Yes 27 159
QXC2PT18PQ4 QXC2PT18PQ4-L10K 10% Yes 27 159
QXN2PT18PQ4 QXN2PT18PQ4-L10K 10% Yes 27 159
QXX2AT18PS6 QXX2PT18PS6-L10K 10% Yes 27 159
QXC2AT18PS6 QXC2PT18PS6-L10K 10% Yes 27 159
QXN2AT18PS6 QXN2PT18PS6-L10K 10% Yes 27 159
QXX2PT18VQ4 QXX2PT18VQ4-L10K 10% Yes 27 159
QXC2PT18VQ4 QXC2PT18VQ4-L10K 10% Yes 27 159
QXN2PT18VQ4 QXN2PT18VQ4-L10K 10% Yes 27 159
QXN2PT18VQ4 QXN2PT18VQ4-L10WF35K 10% Yes 27 159
QXX2AT10PS06 QXX2AT10PS06-L10K 10% Yes 14 89
QXC2AT10PS06 QXC2AT10PS06-L10K 10% Yes 14 89
QXX2AT18PS06 QXX2AT18PS06-L10K 10% Yes 27 159
QXC2AT18PS06 QXC2AT18PS06-L10K 10% Yes 27 159
QXX5AT20PS06 QXX5AT20PS06-L10K 10% Yes 28 177
QXC5AT20PS06 QXC5AT20PS06-L10K 10% Yes 28 177
QXX5AT60PS08 QXX5AT60PS08-L10K 10% Yes 90 530
QXC5AT60PS08 QXC5AT60PS08-L10K 10% Yes 90 530
QXX5AT80PS08 QXX5AT80PS08-L10K 10% Yes 95 708
QXC5AT80PS08 QXC5AT80PS08-L10K 10% Yes 95 708
Ingersoll Rand® Direct Solutions Center