inhoud / contents - home - falcon...

Bladsy/

Gemagtigde Handelaar/ Authorised Dealer:Verkoopsdatum/ Date of Sale:Implement:Model Nr./ Model No.:Reeks Nr./ Serial No.:

Inhoud / ContentsBladsy / Page

3458

1012141618202224262830323436384042444647

Falcon SlashersCompany ProfileInstallation and SafetyRoutine MaintenanceFalcon Warranty PolicyFalcon F25/90 SlasherFalcon F25/120 SlasherFalcon F40/120 SlasherFalcon F40/150 SlasherFalcon F50/120 SlasherFalcon F50/150 SlasherFalcon F50/150/4 SlasherFalcon F50/180 SlasherFalcon F50/180/4 SlasherFalcon F50/150RG SlasherFalcon F50/180RG SlasherFalcon F80/150 SlasherFalcon F80/150/4 SlasherFalcon F80/180 SlasherFalcon F80/180/4 SlasherFalcon F80/200 SlasherFalcon F80/200/4 SlasherFalcon F50 GearboxFalcon F80 Gearbox

Falcon WentelsnyerMaatskappyprofiel

Installering en VeiligheidRoetine-instandhouding

Falcon se WaarborgbeleidFalcon F25/90 Wentelsnyer

Falcon F25/120 WentelsnyerFalcon F40/120 WentelsnyerFalcon F40/150 WentelsnyerFalcon F50/120 WentelsnyerFalcon F50/150 Wentelsnyer

Falcon F50/150/4 WentelsnyerFalcon F50/180 Wentelsnyer

Falcon F50/180/4 WentelsnyerFalcon F50/150RG WentelsnyerFalcon F50/180RG Wentelsnyer

Falcon F80/150 WentelsnyerFalcon F80/150/4 Wentelsnyer



Falcon F50 RatkasFalcon F80 Ratkas

Bladsy/

Falcon WentelsnyersDie Falcon Wentelsnyer is ‘n vinnige, doeltreffende en moeitevry implement. Verskillende modelle met snywydtes van 0,9 m tot 3 m is beskikbaar om in die verskillende sny- en bossiekapbehoeftes te voorsien en by verskillende trekkergroottes te pas. Die beproefde en bewese snymeganisme verseker ‘n skoon snit in alle toestande. Bossiekappers moenie vir hooimaak gebruik word nie. Falcon Ligtediens Wentelsnyers word vir alle grassny- en ligte bossiekapwerk gebruik. Daar is twee modelle, met snywydtes van 0,9 m en 1,2 m onderskeidelik. Albei implemente is lig, maar stewig gebou, en is vir kleiner trekkers ontwerp. ‘n Falcon-bossiekapper maak grassny en ligte bossiekapwerk in die tuin of op die kleinhoewe ‘n plesier eerder as sleurwerk. Falcon Mediumdiens Wentelsnyers word saam met mediumgrootte trekkers vir algemene grassny- en bossiekapwerk gebruik. Twee modelle is beskikbaar, met snywydtes van 1,2 m en 1,5 m onderskeidelik. ‘n Kontrahaak is standaard op albei modelle, wat dit moontlik maak om tot teenaan heinings te sny. Falcon Swaardiens Wentelsnyers word saam met trekkers tot en met 50 kW gebruik vir alle grassny- en bossiekapwerk. Verskillende modelle is beskikbaar, met snywydtes van 1,2 m tot 4.5 m. Hulle is met plaaslikvervaardigde F50-reeks-ratkaste toegerus; die 3 m model het ook ‘n aftakmodule (splitter box). ‘n Kontrahaak is standaard op alle modelle, behalwe die F50/300, wat dit moontlik maak om tot teenaan heinings te sny. Falcon Ekstra Swaardiens Wentelsnyers, vir gebruik saam met trekkers tot en met 80 kW, is geskik vir alle grassny, bosopruiming en baie swaar bossiekapwerk. Falcon vervaardig ‘n ver-skeidenheid modelle, met snywydtes van 1,5 m tot 2 m. Hulle is met plaaslikvervaardigde F80-reeks-ratkaste toegerus. Hierdie wentelsnyers is gemaak om die strafste toestande te hanteer.

Falcon SlashersThe Falcon Slasher is a quick, efficient and trouble-free implement. Different models with cutting widths from 0,9 m to 3 m are available to meet the varying cutting and slashing requirements and match the appropriate tractors. The tried and tested cutting gear ensures a clean cut in all conditions. Slashers should not be used for haymaking purposes.

Falcon Light Duty Slashers are used for all grass-cutting and light slashing operations. There are two models, with cutting widths of 0,9 m and 1,2 m respectively. Both implements have a light but strong construction and are designed for use on smaller tractors. The use of a Falcon Slasher makes grass-cutting and light slashing in the garden or on the plot a pleasure rather than a chore.

Falcon Medium Duty Slashers are used on medium-sized tractors for all general grass-cutting and slashing work. Two models are available, with cutting widths of 1,2 m and 1,5 m respec-tively. An offset hitch is standard on both models, which permits cutting close up to boundary fences.

Falcon Heavy Duty Slashers are for use on tractors up to 50 kW for all grass-cutting and slash-ing operations. Different models are available, with cutting widths from 1,2 m to 4.5 m. They are fitted with a locally manufactured F50 series gearbox; in addition the 3 m model has a splitter box. The off-set hitch, which permits cutting up to a boundary fence, is standard on all models except the F50/300.

Falcon Extra Heavy Duty Slashers, for use with tractors up to 80 kW, are suitable for all grass-cutting, bush-clearing and very heavy slashing operations. Falcon manufactures a range of models, with cutting widths from 1,5 m to 2 m. They are fitted with an F80 series, locally manufactured gearbox. These slashers are engineered to tackle the toughest terrain.

Bladsy/

MaatskappyprofielFalcon Agricultural Equipment (Edms.) Bpk. is ’n eienaar-bestuurde besigheid en die grootste vervaardiger van wentelsnyers in Afrika. Die maatskappy het sy deure in 1985 by sy huidige perseel in Howick, KwaZulu-Natal, Suid-Afrika, geopen en is ideaal geleë – in ’n boerderygebied, met ’n vooraanstaande landboukollege naby. Falcon is ‘n erkende Breedgebaseerde Swart Ekonomiese Bemagtiging-bydraer en ons geskoolde arbeidsmag is ’n toegewyde span op wie ons baie trots is.

Ons primêre mark is die landbousektor, met nisverkope in die nywerheids- en turfimplement-markte. Ons versprei ons produkte deur meer as 350 gemagtigde handelaars landswyd, asook buite ons grense in ander Afrika-lande.

Ons vervaardig die Falcon- en Locust-implementreekse en ons voortgesette vernuwing- en verbeter-ingsprogram verseker dat ons konsekwent implemente loods om in ons kliënte se veranderende vereistes te voorsien.

Die Falcon-reeks sluit wentelsnyers, Hooimakers®, materiaalhanteringsimplemente, mulchers, grass-nyers, strooiers, kapploeë en ploeë in. Almal is ontwerp om eenvoudig, veilig en diensbaar te wees en uitstekende waarde vir geld te bied. Hulle is gebou om te hou en ons strawwe Suid-Afrikaanse toestande die hoof te bied.

In baie dele van Suid-Afrika is “Falcon” die generiese term vir grassny-implemente, wat ons die onbetwiste leier op ons gebied maak. Die nakom van ’n bemarkingsbelofte vorm die grondslag van enige suksesvolle bemarkingsveldtog, en almal wat die Falcon-handelsmerk koop, koop meer as net ’n produk – hulle koop die erfenis en deskundigheid van ’n maatskappy wat al lank in die land is!

Die Locust-reeks is veral geskik vir kleinhoeweboere, meer prysgevoelige kopers en ontluikende boere. Hierdie reeks implemente, wat wentelsnyers en ‘n rollersnyer insluit, werk goed saam met ouer of minder kragtige trekkers.

Ons voer ook ‘n reeks implemente in wat die plaaslik-vervaardigdes komplementeer. Dit sluit die Amazone-strooiers, -spuite, -grassnyers en -grondbewerkingsimplemente in (uit Duitsland), asook die Votex-stokkiekappers en –grassnyers, insluitend reiksnyers (uit Nederland).

Falcon Agricultural Equipment (Edms.) Bpk. is daartoe verbind om ons plaaslike gemeenskappe op baie verskillende maniere te ondersteun. Ons hooffokus is die welsyn van kinders, en ons voorsien ‘n veilige en geskikte skoolomgewing vir hulle, sowel as skoolverwante benodigdhede.

Ons span is trots op sy professionele benadering tot besigheid. Ons het langdurige verhoudings met ons handelaars en hul klante opgebou, gebaseer op eerlikheid, vertroue, respek en integriteit. Voor-treflike klantediens is ’n belangrike deel van die Falcon-belofte.

Company ProfileFalcon Agricultural Equipment (Pty) Ltd is an owner-managed business and the largest manufacturer of rotary cutters in Africa. The company opened its doors in 1985, at its current premises in Howick, KwaZulu-Natal, South Africa. This is the ideal location, as it is in an agricultural area with a leading agricultural college nearby. Falcon is a recognised Broad-Based Black Economic Empowerment contributor and our skilled labour force is a dedicated team of whom we are proud.

Our primary market is the agricultural sector, with niche efforts into the industrial and turf implement markets. We distribute our products through more than 350 authorised dealers countrywide, as well as across our borders into other African countries.

We manufacture the Falcon and Locust ranges of implements and our ongoing programme of innovation and improvement ensures that we consistently launch implements to satisfy our customers’ ever-changing requirements.

The Falcon range includes slashers, Haymakers®, material handling implements, mulchers, mowers, spreaders, rotavators and ploughs. Each one is designed to be simple, safe and serviceable, offering excellent value for money. They are built to last and are capable of coping with the tough South African conditions.

In many parts of South Africa, “Falcon” is the generic term for grass-cutting implements, making us the undisputed leader in our field. Delivery on a marketing promise is the foundation of any successful marketing drive and farmers buying the Falcon brand buy more than just a product - they buy the heritage and expertise of a company that has been around for a long time!

The Locust range of implements is particularly suited to smallholders, more price-sensitive buyers and emerging farmers. These implements, which include slashers and a rollermower, work well with older or lower-powered tractors.

We also import a range of implements that complement the locally manufactured ones. These include the Amazone spreaders, sprayers, mowers and soil tillage implements (from Germany), the Votex shredders and mowers, including reach mowers (from the Netherlands).

Falcon Agricultural Equipment (Pty) Ltd is committed to supporting our local communities in many different ways. Our main focus is the well-being of children, and we provide a safe and suitable school environment for them, as well as school-related necessities.

Our team prides itself on its professional approach to business. We have built long-standing relationships with our dealers and their customers based on honesty, trust, respect and integrity. Excellent customer service is an important part of the Falcon promise.

Bladsy/

Lees die volgende instruksies vir installering, veiligheid en roetine-instandhouding asseblief baie noukeurig. As u enigsins oor die korrekte gebruik- of instandhoudingsprosedure twyfel, kontak asseblief u handelaar, of ons, en ons sal u met graagte help.

Installering en VeiligheidDit is noodsaaklik om die stappe hier onder streng te volg. Om hulle te ignoreer sal die lewensduur van u Falcon-implement verkort en tot onnodige onkoste lei.

1. VUL DIE RATKAS MET OLIE TOT DIE KORREKTE VLAK Vul die ratkas tot die korrekte vlak met hoëgehalte-ratkasolie. Ons beveel Fuchs Renep 1000 aan, maar EP90 kan vir byvulling gebruik word. Die Falcon F50- en F80-reeks ratkaste het ’n peilstokkie en moet tot by die merkie daarop gevul word. Verseker dat die F50- en F80- rat-kaste se asemgaatjies skoon gehou word om blokkasies te voorkom. Dié gaatjies is bo in die peilstokkies geleë.

Die F25- en F40-reeks gegote-yster-ratkaste aan die ligte- en mediumdiens-implemente het ’n vulprop en ’n vlakprop. Maak albei proppe oop en vul totdat die olie by die vlakprop uitloop. MOET NIE oorvul nie, want dit kan oorverhitting en skade aan seëls veroorsaak.

VERSEKER DAT DIE KRAGAFTAKKERAS KORREK IS VIR U TREKKER Die kragaftakkeras sal dalk tot die regte lengte gesny moet word om u trekker/Falcon-kombinasie te pas. ’n Te lang as kan tot ernstige skade aan u trekker, die wentelsnyer of die kragaftakkeras lei wanneer die implement gelig of laat sak word. As u die as egter te kort afsny, kan dit veroorsaak dat u dit nie kan gebruik nie, of dat die as onder aandrywing kan begin vibreer, breek of oopskeur indien die oorvleueling te kort is, kan dit die implement en trekker beskadig en die drywer beseer. Hoe om die regte as-lengte te bereken en die as te sny word duidelik in die kragaftakkeras-handleiding beskryf. Verwys dus asseblief na daardie handleiding (veral bladsye 39 en 97–100) voordat u die as sny. Voordat u u trekker/Falcon-kombinasie gebruik, verseker dat die trekker se hidrouliese 3-punt-koppelbeheer-hefboom op die regte hoogte ingestel is, sodat die Falcon-implement nie te hoog opgelig word nie, aangesien dit die kragaftakkeras sal beskadig. Verseker dat die kragaftakker-omhulsel te alle tye in ‘n goeie toestand is.

Please read the following installation, safety and routine maintenance instructions very carefully. Should you be in any doubt as to the correct operating or maintenance procedure, please contact your dealer, or us, and we will gladly assist you.

Installation and SafetyIt is essential that you adhere to the steps listed below. To ignore them will shorten the life of your Falcon implement and result in unnecessary expense.

1. FILL THE GEARBOX WITH OIL TO THE CORRECT LEVEL Fill the gearbox to the correct level with good-quality gearbox oil. We recommend Fuchs Renep 1000, but EP90 can be used for topping up. The Falcon F50 and F80 series gearboxes are fitted with a dipstick and should be filled to the mark on the dipstick. Ensure that the breather holes on the F50 and F80 gearboxes are kept clean to avoid blockages. The breather hole is located on top of the dipstick.

The F25 and F40 series cast-iron gearboxes used on the light- and medium-duty implements have a filler plug and a level plug. Open both plugs and fill until the oil runs out of the level plug. DO NOT overfill, as this can cause overheating and damage to seals.

CHECK THAT THE PTO SHAFT IS CORRECTLY SUITED TO YOUR TRACTOR The PTO shaft may have to be cut to the correct length to suit your tractor/Falcon combination. Too long a shaft can result in serious damage to your tractor, the slasher, or the PTO shaft when the implement is either raised or lowered. Cutting the shaft too short may result in you not being able to use it or, if the overlap is too short, the shaft will, when under power, start to vibrate, break or tear open, causing damage to the implement and tractor and injury to the operator. The process of cutting the PTO and the calculation to establish the correct length are clearly described in the PTO manual, so please refer to this handbook, especially pages 39 and 97-100, before cutting the PTO shaft.

Before using your tractor/Falcon combination ensure that the tractor’s hydraulic 3-point linkage control lever is set to the correct height so that it does not pick up the Falcon implement too high as this will result in damage to the PTO shaft. Ensure that the PTO guard is in good order at all times.

2.2.

Bladsy/

GHRIES ALBEI KRUISKOPPELINGS OP DIE KRAGAFTAKKERAS Geen kragaftakkeras kan sonder ghries werk nie! Dit is noodsaaklik dat die as se twee kruiskoppelings aanvanklik volledig te ghries, en dan geghries te hou. Verseker dat die ghries uit al vier koppies van die kruis stoot, elke keer wanneer dit geghries word. Ghries ook die twee glybuise.

STEL DIE GLYKOPPELAAR TOT DIE KORREKTE WRINGKRAGMeeste Falcon-kapploeë is met ‘n glykoppelaar toegerus. Dit is tot die korrekte wringkrag gestel, sodat dit onder oormatige ladings kan gly en jou implement teen permanente meganiese skade kan beskerm.

Indien dit vir lang periodes oorlaai word, sal die glykoppelaar gly en oortollige hitte weens wrywing genereer. Tekens van oormatige gly is rook, brandreuke of poeierreste in die omgewing van die glykoppelaar, of verkleuring van die glykoppelaareenheid. Onder normale werkstoestande moet die temperatuur van die glykoppelaareenheid dus nie warmer wees as die temperatuur van die implement se ratkas nie.

Die glykoppelaar sal dalk in geval van die volgende opgedoen “opgeknap” moet word:• die wrywingplate is geslyt of uitgebrand vanweë langdurige oorlading• ghries, olie of diesel het die glykoppelaarmeganisme gekontamineer• die implement het lank gestaan, wat die waarskynlikheid van roes in die

glykoppelaarmeganisme kan verhoog.

Wanneer die glykoppelaar opgeknap word, verseker dat slegs oorspronklike onderdele gebruik word soos op bladsy 55 van hierdie handleiding uiteengesit. Gebruik altyd die veer-instellings wat in die tabel hier onder aangedui word om akkurate verstelling te verseker. Draai elke keermoer agtereenvolgens met ‘n halfdraai totdat die betrokke instelling bereik is.

Alle Falcon-wentelsnyers is ontwerp om teen 540 opm te loop. Die wentelsnyer moet hoër gelig word as die materiaal wat gesny gaan word, en dan moet die kragaftakker gekoppel word. Sodra dit gekoppel is, moet die opm tot 540 verhoog en dan tydens die snyery daar gehou word. Versuim om dit te doen sal die wringkragvlakke op sowel die trekker as die wentelsnyer verhoog, wat tot ‘n korter glykoppelaarlewe sal lei.

GREASE BOTH UNIVERSAL CROSSES OF THE PTO SHAFTThe PTO shaft can not operate without grease! It is essential that the two crosses of the shaft are fully greased initially and kept greased thereafter. Ensure that the grease pushes out of all four cups, of each cross, every time it is greased. Also grease the two sliding tubes.

SLIP-CLUTCH OPERATION AND MAINTENANCEMost Falcon Slashers are fitted with a slip-clutch. This is required to slip under excessive load at a specific pre-set torque in order to prevent permanent mechanical damage to the implement.

If overloaded for sustained periods the slip-clutch will slip and generate excess heat through friction. Excessive slipping may be detected through smoke, burning odours or powder residues in the vicinity of the slip-clutch, or discoloration of the slip-clutch assembly. So under normal operating conditions the slip-clutch assembly temperature should not exceed that of thetemperature of the implement’s gearbox.

The slip-clutch may need to be overhauled in the event of any of the following:

• the friction plates are worn or burned out due to sustained overloading• the slip-clutch mechanism has become contaminated by grease, oil or diesel• the implement has stood for an extended period, increasing the likelihood of corrosion in the

slip-clutch mechanism.

When overhauling the slip-clutch, be sure to use only original parts as listed on page 55 of this manual. Apply the spring preload settings indicated in the table below to ensure accurate adjustment. Tighten each retaining nut successively by one half-turn until the relevant setting is achieved.

All Falcon Slashers are designed to run at 540 rpm. The slasher should be raised above the material that is to be cut and then the tractor PTO is to be engaged. Once engaged, the rpm should be increased to 540 and then maintained at that level while cutting. Failing to do this will increase the torque levels on both the tractor and the slasher, resulting in a shorter slip clutch life.

3. 3.

4.4.

Category OEM, clutch assembly OEM, spring Number of

springsSpring

length, (h)B4-FF1 146.241.011 180.014.022 8 32.0mmB6-FF2 146.262.011 180.019.017 8 32.9mmB6-FF4 146.264.011 180.014.022 8 31.2mmB8-FF4 146.284.011 180.014.022 8 31.2mm

Kategorie OGV, koppelaa-reenheid OGV, veer Aantal

vereVeer

lengte, (h)B4-FF1 146.241.011 180.014.022 8 32.0mmB6-FF2 146.262.011 180.019.017 8 32.9mmB6-FF4 146.264.011 180.014.022 8 31.2mmB8-FF4 146.284.011 180.014.022 8 31.2mm

Bladsy/

STEL DIE TREKKER SE BO-ARM TOT DIE REGTE LENGTEDit is belangrik om u trekker se bo-arm so te stel dat die implement se topmas in die regop posisie is wanneer die implement op gelyk grond rus. Dit sal die implement toelaat om op die volle lengte van sy glystukke te loop en ’n eenvormige snyhoogte oor ongelyke oppervlakke te verseker.

Dit sal ook help verseker dat die kragaftakkeras nie aan die voorste deel van die implement raak wanneer dit opgelig is nie. Sou die kragaftakkeras egter steeds aan die implement raak, beperk die hoogte deur die stop op die hidrouliesebeheer-vlak te stel.

GAAN ALLE BOUTE NA EN DRAAI HULLE VASVerseker dat alle boute heeltemal vas is voor gebruik en dan weer ná die eerste paar uur se gebruik. Dit is baie belangrik om die boute aan die snymeganisme dikwels na te gaan en vas te draai.

MAAK SEKER DAT DIE STOFSKERM OOR DIE LEWERINGSAS IN DIE REGTE POSISIE IS (aan die F50, F80 en F80EV)Dit is noodsaaklik dat die skerm onder u ratkas in die regte posisie moet wees. Dit is om te verseker dat gras, tou of draad nie om die onderkant van die leweringsas draai en die onderste olieseëls van die ratkas beskadig nie. Skade aan hierdie seëls kan al die ratkasolie laat uitloop. Die twee boute wat hierdie stofskerm onder u Falcon-wentelsnyer vashou, moet nagegaan en, indien nodig, vasgedraai word. Die stofskerm moet so laag as moontlik geposisioneer wees en die flens van die ratkas se leweringsas heeltemal bedek.

SLAAN AG OP DIE VEILIGHEIDSREËLS Gee u drywer asseblief opdrag om die volgende reëls streng na te kom: • Moenie van die trekker afklim terwyl die enjin loop nie en verseker dat dit afgeskakel is

voordat enige verstellings gemaak word.• Voordat onder die implement gewerk word om lemme te vervang of boute vas te draai, laat

sak eers die raam op ’n staander of stut of op die grond.• Wees bewus van enige hindernisse, soos stompe, bottels, blikkies ens. Verwyder hulle van

die land voordat met werk begin word, of vermy hulle ten minste.• Ontmoedig toeskouers en moet nooit passasiers dra nie. Onthou, klein klippies ens. kan

teen hoë spoed uitvlieg en ernstige beserings veroorsaak.• Moet niemand toelaat om naby die wentelsnyer te kom terwyl dit werk nie.• Beheer die trekker só dat die optimale kragaftakkerspoed van ongeveer 540 opm gehand-

haaf word. ’n Te lae kragaftakkerspoed sal die dryfasstelsel oorlaai. ’n Te hoë spoed sal die taak gevaarlik maak.

• Moet niemand toelaat om hulle hande of voete onder die wentelsnyer in te druk terwyl die trekkerenjin loop nie.

ADJUST THE TRACTOR TOP-LINK TO THE CORRECT LENGTHIt is important to adjust your tractor top-link so that the implement topmast is in the vertical position when the implement is resting on level ground. This will allow the implement to run on its full skid runner length, ensuring a uniform cutting height when running over uneven lands.

This will also help to ensure that the PTO shaft does not come into contact with the front of the implement when it is in the raised position. However, should the PTO shaft still touch the implement, limit the height by setting the stop on the hydraulic control level.

CHECK AND TIGHTEN ALL BOLTSCheck that all bolts are fully tightened before use and then again after the first few hours of use. It is very important that the bolts on the cutting gear are checked and tightened frequently.

CHECK THAT THE DUST COVER OVER THE OUTPUT SHAFTS IS IN THE CORRECT POSITION (Fitted on the F50, F80 and F80EV)It is essential that the cover under your gearbox is in the correct position. This is to ensure that grass, twine or wire does not wrap around the base of the output shaft and damage the lower oil seals of the gearbox. Damage to these seals could drain the gearbox oil. The two bolts securing this dust cover under your Falcon Slasher should be checked and tightened if necessary. The dust cover should be positioned as low as possible and should cover the flange of the gearbox’s output shaft completely.

TAKE NOTE OF THE SAFETY RULES Please instruct your driver to adhere to the following rules: • Do not get off the tractor while it is running, and ensure that the tractor is turned off before

making adjustments.• When working under the implement, changing the blades or tightening the bolts, the frame

should be lowered on to a stand, a prop or the ground.• Be aware of any obstruction such as stumps, stones, bottles, tins, etc. Remove these from

the field before starting work or at least avoid them. • Discourage spectators and never carry passengers. Remember, it is possible that small

stones can fly out at high speed. These projectiles can cause serious injury.• Do not allow anyone to walk near the slasher while it is operating.• Operate the tractor in such a way that you establish and maintain the optimum PTO speed

of approximately 540 rpm. Too low a speed will overload the drive shaft system. Too high a PTO speed will make the operation dangerous.

• Do not allow anyone to put their hands or feet under the slasher while the tractor is running.• Do not remove the protective covers around the PTO shaft or flaps provided on the

implement.

5. 5.

6.6.

7.

7.

8.

8.

Bladsy/

• Moenie die omhulsels om die kragaftakkeras of flappe wat saam met die implement verskaf is, verwyder nie.

• Moenie die topmaskettings aan oormatige spanning onderwerp deur die implement teen hoë snelhede oor ruwe terrein te vervoer nie. Inspekteer die kettings en koppelings gereeld en vervang hulle as hulle geslyt is. Gebruik slegs kettings en koppelings met die korrekte spesifikasie.

Roetine InstandhoudingDAAGLIKSE KONTROLES• Verseker dat alle boute, moere en skroewe vas is. Nagaan van boute en moere aan die

snymeganisme is veral belangrik.• Kontroleer die ratkas-olievlak en vul aan tot by die korrekte vlak. Kontroleer vir ratkas-

olielekke. Let asseblief daarop dat geen waarborg-eis ingedien kan word vir ‘n ratkas wat sonder olie geloop het, of nie met die gespesifiseerde graad van smeermiddel gevul was nie. Dit is dus noodsaaklik om die ratkas korrek gevul te hou.

• Ghries die kragaftakkeras.• Verseker dat die twee boute wat die glykoppelaar vashou, vas is, omdat ‘n los glykoppelaar

uiteindelik sal veroorsaak dat die inset-as afbreek. • Let op na die slytasie op die lemme. Maak hulle gereeld met ’n hoekslyper skerp of vervang

hulle as hulle te ver afgeslyt het. Ons beveel aan dat u minstens twee stelle lemme, boute, moere en busse as onderdele vir u Falcon-wentelsnyer byderhand hou. Verseker dat die snymeganisme gebalanseer is, dws dat lemme en lembalke soortgelyke slytpatrone het en dieselfde weeg. Om veiligheid te verseker word aanbeveel dat nuwe boute en moere gebruik word elke keer wanneer lemme vervang word. LET WEL: Vibrasie is die hoofoorsaak van strukturele onklaarraking en oormatige koeëllaerslytasie by wentelsnyers.

GEREELDE KONTROLES • Kontroleer dat die glykoppelaar op die korrekte spanning gestel is en verstel indien nodig.• Kontroleer slytasie op die veerstaalglystukke en vervang indien nodig.• Enige roesmerkies wat dalk verskyn het, moet skoongemaak en opgeknap word. Onthou, u het die beste implement op die mark gekoop. Met korrekte gebruik en behoorlike instandhouding sal dit u jare se uitstekende diens gee.

• Do not subject the topmast chains to excessive strain by transporting the implement at high speeds over rough ground. Inspect the chains and shackles regularly and replace if worn. Use only chains and shackles of the correct specification.

Routine MaintenanceDAILY CHECKS• Check that all bolts, nuts and screws are tight. Checking the bolts and nuts on the cutting

gear is particularly important.• Check the level of the gearbox oil and top up to the correct level. Check for gearbox oil

leaks. It should be noted that no guarantee claim can be submitted on a gearbox that has run dry or has not been filled with the specified grade of lubricant. It is thus essential that the gearbox is kept correctly filled with oil.

• Grease the PTO shaft.• Check that the two bolts holding the slip-clutch are tight, as a loose slip clutch will eventually

cause the input shaft to break off.• Check the wear on the blades. Sharpen them routinely with an angle grinder or replace

when they are worn down too far. We recommend that you keep at least two sets of blades, bolts, nuts and bushes as spares for your Falcon Slasher. Make sure that the cutting gear is balanced, ie that blades and blade beams have similar wear patterns and weigh the same.When changing the blades, in order to ensure safety, it is recommended that new bolts and nuts are fitted each time.

NOTE: Vibration is the main cause of structural failure and excessive bearing wear on slashers.

REGULAR CHECKS• Check that the slip-clutch is set to the correct tension and adjust if not.• Check the wear and tear on the spring steel skid runners, and replace if necessary.• Clean down and touch up any rust spots that may have appeared. Remember, you have purchased the best implement on the market. With the correct operation and proper maintenance, it will give you years of excellent service.

1.

1.

2.

2.

Bladsy/ Page 10

Falcon Warranty PolicyTo safeguard you against material and/or manufacturing defects, or even incorrect assembly, every Falcon implement is carefully inspected before it leaves the Falcon factory.

In the unlikely event that such defects should occur, it may reassure you to know that Falcon will, after inspection by Falcon or its authorised dealer, correct, repair or replace free of charge any part of the implement that was found to be defective in material or workmanship.

The warranty is conditional on the purchaser taking the following four steps:

(1) The Falcon Operator’s Manual must be carefully read and understood, with special consideration to the instructions regarding Installation and Routine Maintenance, prior to using the implement.

(2) The Safety Rules must be studied and strictly adhered to.

(3) The implements shall only be used for their specified purposes.

(4) Only Original Equipment Manufactured parts/components and the specified lubricants must be used.

For the sake of clarity it should be noted that the warranty does not include or cover the following:

A) Falcon does not cover transport costs.

B) Falcon does not guarantee that the implement cannot be broken or damaged due to misuse or incorrect application.

C) Falcon does not cover consequential damage such as gearbox failure caused by a shortage of oil or lubrication.

D) Falcon does not cover any breakage due to the fact that a slip clutch has not been fitted or has been incorrectly set. (A slip clutch is standard equipment on all F50 and F80 series implements.

E) The warranty should not be construed as a free service period. Seals and bearings that require replacement from time to time are for the owner’s account.

DisclaimerThis warranty supersedes all other conditions and warranties, expressed or implied, and of all other obligations or liabilities on the part of Falcon in respect of defective implements.

Falcon se WaarborgbeleidOm u teen materiaalgebreke en/of fabrieksfoute te beskerm, of selfs foutiewe montering, word elke Falcon-implement noukeurig geïnspekteer voordat dit die Falcon-fabriek verlaat.

Indien sulke gebreke sou voorkom, wat onwaarskynlik is, kan u gerus wees dat Falcon, na inspeksie deur Falcon of sy gemagtigde handelaar, enige deel van die implement wat ten opsigte van materiaal of vakmanskap gebrekkig blyk te wees, gratis sal regstel, herstel of vervang.

Die waarborg geld op voorwaarde dat die koper die volgende vier stappe doen:

(1) Die Falcon Operateurshandleiding sorgvuldig lees en verstaan voordat hy die implement gebruik, met besondere aandag aan die instruksies oor Installering en Roetine-instandhouding

(2) Die Veiligheidsreëls bestudeer en streng nakom.

(3) Die implemente slegs gebruik word vir hul spesifieke doeleindes.

(4) Slegs Oorspronklike Gereedskap Vervaardigde onderdele/komponente en die gespesifiseerde smeermiddels gebruik moet word

Ter wille van duidelikheid moet daar asseblief op die volgende gelet word:

A) Falcon dek nie vervoerkoste as deel van die waarborg nie.

B) Falcon waarborg nie dat die implement nie gebreek of beskadig kan word vanweë misbruik of verkeerde aanwending nie.

C) Falcon dek nie voortvloeiende skade soos ratkasonklaarraking weens ’n olie- of smeerolietekort nie.

D) Falcon dek geen brekasie as gevolg van die feit dat ’n glykoppelaar nie aangebring is nie, of verkeerd ingestel is. (’n Glykoppelaar is standaard op alle F50- en F80-reeks-implemente.

E) Die waarborg moet nie as ’n gratis dienstydperk beskou word nie. Waar seëls en koeëllaers periodiek vervang moet word, geskied dit op die eienaar se onkoste.

Afwysing Hierdie waarborg vervang uitdruklik alle ander voorwaardes en waarborge, hetsy uitdruklik vermeld of geïmpliseer, en alle ander verpligtinge of aanspreeklikhede aan die kant van Falcon ten opsigte van gebrekkige implemente.

Bladsy/ Page 11

Warranty Periods

Falcon Slashers, Haymakers® and Mowers

Imported gearbox F25 2 YearsImported gearbox F40 2 YearsPTO 2 YearsFalcon manufactured gearbox F50 3 YearsFalcon manufactured gearbox F80 3 YearsFalcon manufactured parts (hull, side panel, top mast, etc) 2 Years

Other Falcon Implements

Imported gearbox F25 1 YearImported gearbox F40 1 YearPTO 1 YearFalcon manufactured gearbox F50 2 YearsFalcon manufactured gearbox F80 2 YearsFalcon manufactured rotavator gearbox 1 YearFalcon manufactured parts (hull, side panel, top mast, etc) 1 Year

The warranty does not include wearing parts such as; discs, beams, blades, skids, seals, bearings, pins, etc.

Waarborgtydperke

Falcon Wentelsnyers, Hooimakers® en Grassnyers

Ingevoerde ratkas F25 2 JaarIngevoerde ratkas F40 2 JaarKragaftakker 2 JaarFalcon-vervaardigde ratkas F50 3 JaarFalcon-vervaardigde ratkas F80 3 JaarFalcon-vervaardigde onderdele (romp, sypaneel, topmas e.d.m.) 2 Jaar

Ander Falcon Implemente

Ingevoerde ratkas F25 1 JaarIngevoerde ratkas F40 1 JaarKragaftakker 1 JaarFalcon-vervaardigde ratkas F50 2 JaarFalcon-vervaardigde ratkas F80 2 JaarFalcon-vervaardigde kapploeg ratkas 1 JaarFalcon-vervaardigde onderdele (romp, sypaneel, topmas e.d.m.) 1 Jaar

Die waarborg dek nie slytonderdele soos skywe, balke, lemme, glystukke, seëls, koeëllaers, penne e.d.m. nie.

Bladsy/ Page 12

F25-90 SlasherA0001

F25/90 Slasher A0001

Bladsy/ Page 13


Item Part No. Description Qty Item Part No. Description Qty1 H0500 Deck Painted 900 1 41 M3169 Decal Bird FALCON Small 22 M1100 Gearbox F25 1 42 M3178 Decal Blade/Lem 13 T200810CE112112 PTO shaft B2 1.0m 1 43 M3172 Decal DANGER STAY AWAY - ROTATING....... 14 H1124 Disk 3-M16 PCD378.5 1 44 M3120 Decal F25/90 Slasher 15 H0600 Top Mast 1 45 M3174 Decal IMPORTANT WHEN LOADING...... 16 H0400 Side Panel 2 46 M3173 Decal Lifting hook 17 H0655 Clevis Right +stop 1 47 M3175 Decal PROUD TO BE SOUTH AFRICAN 18 H0654 Clevis Left 1 48 M3170 Decal VERY IMPORTANT BEFORE USING....... 19 H0200 Flap Rear 900 1 49 M3116 Decal WARRANTY 2+2 WAARBORG............. 1

10 H0420 Skid runner 8x65 411 H0250 Skirt 900 112 H0700 PTO gaurd 113 R0609 Chain GR5 9.0 114 H0100 Pin Hinge 900 115 M0626 Lifting bracket 116 H0644 Pin Btm link Cat1/2 217 H0631 Pin Top link Cat1 118 LF13582200515 Nut Slotted M24x2 119 H1128 Blade Banana 8x70x(265)-26 320 H1110 Ganged bolts M16Fx45 221 M0622 Shackle 7/16in 1.5T 222 M61616 Nut Nyloc M16 1323 LF13583200409 Washer 25x44x4 124 M81603 Washer M16x40x3 225 M41650 Bolt M16x50HT 926 M40815 Bolt M8x16HT 427 FLP11 Lynchpin 11mm 328 8.4.7.00146 Split Pin B6x60 129 M91604 Washer Spring M16 430 H71613 Bush 16x25x13 231 H71610 Bush Blade 16x32x10 332 LF1786700161 Plug Breather 1/4BSP 133 M91002 Washer Spring M10 2034 M11025 Bolt+nut M10x25HT 1635 M11640 Bolt+nut M16x40HT 836 M21030 Plough bolt+nut M10x30HT 2437 M3003 Serial plate 138 M3187 Decal ATTENTION If your tractor is .... 139 M3171 Decal Baie Belangrik Alvorens U Die 140 M3168 Decal Bird FALCON Large 1

F25-90 SlasherA0001

Bladsy/ Page 14

F25-120 SlasherA0003F25/120 Slasher

A0003

Bladsy/ Page 15


Item Part No. Description Qty Item Part No. Description Qty1 H0501 Deck Painted 1200 1 41 M3171 Decal Baie Belangrik Alvorens U Die 12 H1120 Disk 4-M22 PCD450 1 42 M3168 Decal Bird FALCON Large 13 M1100 Gearbox F25 1 43 M3169 Decal Bird FALCON Small 24 H0401 Side Panel 2 44 M3178 Decal Blade/Lem 15 T400810CE112112 PTO shaft B4 1.0m 1 45 M3172 Decal DANGER STAY AWAY - ROTATING....... 16 H0600 Top Mast 1 46 M3122 Decal F25/120 Slasher 17 H0655 Clevis Right +stop 1 47 M3174 Decal IMPORTANT WHEN LOADING...... 18 H0654 Clevis Left 1 48 M3173 Decal Lifting hook 19 H0201 Flap Rear 1200 1 49 M3175 Decal PROUD TO BE SOUTH AFRICAN 1

10 H0251 Skirt 1200 1 50 M3170 Decal VERY IMPORTANT BEFORE USING....... 111 H0420 Skid runner 8x65 4 51 M3116 Decal WARRANTY 2+2 WAARBORG............. 112 H0700 PTO gaurd 113 R0609 Chain GR5 9.0 114 H0101 Pin Hinge 1200 115 M0626 Lifting bracket 116 M52275 Blade bolt M22-10.9 Special 417 H0644 Pin Btm link Cat1/2 218 H1812 Blade Banana 10x90x(375)-32.5 419 H0631 Pin Top link Cat1 120 LF13582200515 Nut Slotted M24x2 121 H1110 Ganged bolts M16Fx45 222 M62222 Nut Nyloc M22 423 M0622 Shackle 7/16in 1.5T 224 M61616 Nut Nyloc M16 1025 LF13583200409 Washer 25x44x4 126 M81603 Washer M16x40x3 227 M41650 Bolt M16x50HT 628 M40815 Bolt M8x16HT 429 FLP11 Lynchpin 11mm 330 8.4.7.00146 Split Pin B6x60 131 M91604 Washer Spring M16 632 H71613 Bush 16x25x13 233 LF1786700161 Plug Breather 1/4BSP 134 M91002 Washer Spring M10 2135 M11025 Bolt+nut M10x25HT 1836 M11640 Bolt+nut M16x40HT 1237 M21030 Plough bolt+nut M10x30HT 2438 M3116 Decal WARRANTY 2+2 WAARBORG............. 139 M3003 Serial plate 140 M3187 Decal ATTENTION If your tractor is .... 1

F25-120 SlasherA0003

Bladsy/ Page 16

F40-120 SlasherA0011F40/120 Slasher

A0011

Bladsy/ Page 17


Item Part No. Description Qty Item Part No. Description Qty1 H0510 Deck Painted 1200 1 41 M3171 Decal Baie Belangrik Alvorens U Die 12 M1203 Gearbox F40 1 42 M3168 Decal Bird FALCON Large 13 H1257 Disk 4-M22 PCD470 1 43 M3169 Decal Bird FALCON Small 24 H0402 Side panel 2 44 M3178 Decal Blade/Lem 15 T400760CE112F12 PTO shaft T40 760 112 F12 1 45 M3172 Decal DANGER STAY AWAY - ROTATING....... 16 H0601 Top mast Cat1/2 1 46 M3128 Decal F40/120 Slasher 17 H0212 Flap Rear 1200 1 47 M3174 Decal IMPORTANT WHEN LOADING...... 18 H0252 Skirt 1200 1 48 M3173 Decal Lifting hook 19 H0655 Clevis Right +stop 1 49 M3175 Decal PROUD TO BE SOUTH AFRICAN 1

10 H0654 Clevis Left 1 50 M3170 Decal VERY IMPORTANT BEFORE USING....... 111 H0702 PTO guard 1 51 M3116 Decal WARRANTY 2+2 WAARBORG............. 112 H0420 Skid runner 8x65 413 R0609 Chain GR5 9.0 114 H0101 Pin Hinge 1200 115 M0626 Lifting bracket 116 H1206 Ganged bolts 3/4UNFx2-1/2 217 M52275 Blade bolt M22-10.9 Special 418 H0644 Pin Btm link Cat1/2 219 H1812 Blade Banana 10x90x(375)-32.5 420 H0630 Pin Top link Cat1/2 121 0.140.7102.00 Nut Slotted M30x2 122 M62222 Nut Nyloc M22 423 M61919 Nut Nyloc 3/4UNF 424 0.139.7101.00 Washer 31x56x6 125 M0622 Shackle 7/16in 1.5T 226 M61616 Nut Nyloc M16 627 M81603 Washer M16x40x3 228 M41650 Bolt M16x50HT 629 M40815 Bolt M8x16HT 430 M1416 Split pin B5x60 131 FLP11 Lynchpin 11mm 332 M91604 Washer Spring M16 633 H71613 Bush 16x25x13 234 M91002 Washer Spring M10 2135 LF14086700269 Plug Breather 1/2BSP 136 M11025 Bolt+nut M10x25HT 1837 M11640 Bolt+nut M16x40HT 1238 M21030 Plough bolt+nut M10x30HT 2439 M3003 Serial plate 140 M3187 Decal ATTENTION If your tractor is .... 1


Bladsy/ Page 18


Falcon F40/150 Slasher A0013

Bladsy/ Page 19


Item Part No. Description Qty Item Part No. Description Qty1 H0511 Deck Painted 1500 1 41 M3187 Decal ATTENTION If your tractor is .... 12 M1203 Gearbox F40 1 42 M3171 Decal Baie Belangrik Alvorens U Die 13 H0404 Side panel 2 43 M3168 Decal Bird FALCON Large 14 H0603 Top mast Cat1/2 1 44 M3176 Decal Bird Falcon Meduim 25 T600960CE112F22 PTO shaft T60 960 112 F22 1 45 M3178 Decal Blade/Lem 16 H0202 Flap Rear 1500 1 46 M3172 Decal DANGER STAY AWAY - ROTATING....... 17 H1241 Disk 4-M22 PCD650 1 47 M3130 Decal F40/150 Slasher 18 H0253 Skirt 1500 1 48 M3174 Decal IMPORTANT WHEN LOADING...... 19 H0655 Clevis Right +stop 1 49 M3173 Decal Lifting hook 1

10 H0654 Clevis Left 1 50 M3175 Decal PROUD TO BE SOUTH AFRICAN 111 H0702 PTO guard 1 51 M3170 Decal VERY IMPORTANT BEFORE USING....... 112 H0102 Pin Hinge 1500 1 52 M3116 Decal WARRANTY 2+2 WAARBORG............. 113 M0626 Lifting bracket 114 H0422 Skid runner 8x90 415 H1206 Ganged bolts 3/4UNFx2-1/2 216 H0645 Pin Btm link Cat2/1 217 M52275 Blade bolt M22-10.9 Special 418 H0633 Pin Top link Cat2/1 119 H1801 Blade Banana 10x90x(440)-32.5 420 R0611 Chain GR5 10.0 121 0.140.7102.00 Nut Slotted M30x2 122 M62222 Nut Nyloc M22 423 M61919 Nut Nyloc 3/4UNF 424 0.139.7101.00 Washer 31x56x6 125 M0622 Shackle 7/16in 1.5T 226 H71617 Bush 16x25x17 227 M61616 Nut Nyloc M16 628 M81603 Washer M16x40x3 229 M41655 Bolt M16x55HT 230 M41650 Bolt M16x50HT 431 M40815 Bolt M8x16HT 432 M1416 Split pin B5x60 133 FLP11 Lynchpin 11mm 334 M91604 Washer Spring M16 635 M91002 Washer Spring M10 2136 LF14086700269 Plug Breather 1/2BSP 137 M11025 Bolt+nut M10x25HT 1838 M11640 Bolt+nut M16x40HT 1239 M21030 Plough bolt+nut M10x30HT 2440 M3003 Serial plate 1


Bladsy/ Page 20



Bladsy/ Page 21


Item Part No. Description Qty Item Part No. Description Qty1 H0519 Deck Painted 1200 1 41 M3172 Decal DANGER STAY AWAY - ROTATING....... 12 H0402 Side panel 2 42 M3141 Decal F50/120 Slasher 13 T400760CE112F12 PTO shaft T40 760 112 F12 1 43 M3174 Decal IMPORTANT WHEN LOADING...... 14 H1300 Gearbox F50 1 44 M3173 Decal Lifting hook 15 H0601 Top mast Cat1/2 1 45 M3175 Decal PROUD TO BE SOUTH AFRICAN 16 H0212 Flap Rear 1200 1 46 M3170 Decal VERY IMPORTANT BEFORE USING....... 17 H0252 Skirt 1200 1 47 M3117 Decal WARRANTY 2+3 WAARBORG............. 18 H0655 Clevis Right +stop 1 48 M8400 Operators manual Slashers 19 H0654 Clevis Left 1

10 H1122 Disk 4-M22 PCD470 111 H0702 PTO guard 112 H0420 Skid runner 8x65 413 R0609 Chain GR5 9.0 114 H0101 Pin Hinge 1200 115 H0645 Pin Btm link Cat2/1 216 M52275 Blade bolt M22-10.9 Special 417 H0633 Pin Top link Cat2/1 118 H1812 Blade Banana 10x90x(375)-32.5 419 H5357 Ganged bolts M16Fx55 220 M62222 Nut Nyloc M22 421 M0622 Shackle 7/16in 1.5T 222 M61616 Nut Nyloc M16 623 M81603 Washer M16x40x3 224 M41650 Bolt M16x50HT 625 M41450 Bolt M14x50HT 626 FLP11 Lynchpin 11mm 327 M91604 Washer Spring M16 628 M31410 Nut M14 629 M61616F Nut Nyloc M16F 430 H71613 Bush 16x25x13 231 M91002 Washer Spring M10 2132 M11025 Bolt+nut M10x25HT 1833 M11640 Bolt+nut M16x40HT 1234 M21030 Plough bolt+nut M10x30HT 2435 M3003 Serial plate 136 M3187 Decal ATTENTION If your tractor is .... 137 M3171 Decal Baie Belangrik Alvorens U Die 138 M3168 Decal Bird FALCON Large 139 M3169 Decal Bird FALCON Small 240 M3178 Decal Blade/Lem 1


Bladsy/ Page 22



Bladsy/ Page 23


Item Part No. Description Qty Item Part No. Description Qty1 H0520 Deck Painted 1500 1 41 M3187 Decal ATTENTION If your tractor is .... 12 H0404 Side panel 2 42 M3171 Decal Baie Belangrik Alvorens U Die 13 H0603 Top mast Cat1/2 1 43 M3168 Decal Bird FALCON Large 14 T600960CE112F22 PTO shaft T60 960 112 F22 1 44 M3176 Decal Bird Falcon Meduim 25 H1300 Gearbox F50 1 45 M3178 Decal Blade/Lem 16 H0202 Flap Rear 1500 1 46 M3172 Decal DANGER STAY AWAY - ROTATING....... 17 H0253 Skirt 1500 1 47 M3133 Decal F50/150 Slasher 18 H0655 Clevis Right +stop 1 48 M3174 Decal IMPORTANT WHEN LOADING...... 19 H0654 Clevis Left 1 49 M3173 Decal Lifting hook 1

10 H0702 PTO guard 1 50 M3175 Decal PROUD TO BE SOUTH AFRICAN 111 H0102 Pin Hinge 1500 1 51 M3170 Decal VERY IMPORTANT BEFORE USING....... 112 H1351 Blade beam 10x100 PCD890 2 52 M3117 Decal WARRANTY 2+3 WAARBORG............. 113 H0422 Skid runner 8x90 4 53 M8400 Operators manual Slashers 114 H0645 Pin Btm link Cat2/1 215 H0633 Pin Top link Cat2/1 116 H1804 Blade Banana 12x90x(345)-32.5 217 R0611 Chain GR5 10.0 118 M51963 Blade bolt 3/4UNCx2-1/2HT CSK 219 H5357 Ganged bolts M16Fx55 220 M0623 Spacer 121 M0622 Shackle 7/16in 1.5T 222 H71914 Bush Hard 19x32x14 223 H71617 Bush 16x25x17 224 M31612 Nut M16 225 M61616 Nut Nyloc M16 626 M81603 Washer M16x40x3 227 M41655 Bolt M16x55HT 228 M41650 Bolt M16x50HT 429 M41645 Bolt M16x45HT 230 M41450 Bolt M14x50HT 431 M61921 Nut Nyloc 3/4UNC CSK 232 FLP11 Lynchpin 11mm 333 M91604 Washer Spring M16 834 M31410 Nut M14 435 M61616F Nut Nyloc M16F 436 M91002 Washer Spring M10 2137 M11025 Bolt+nut M10x25HT 1838 M11640 Bolt+nut M16x40HT 1239 M21030 Plough bolt+nut M10x30HT 2440 M3003 Serial plate 1


Bladsy/ Page 24

F50/150/4 Slasher A0021/4

F50-150-4 SlasherA0021-4

Bladsy/ Page 25

F50/150/4 Slasher A0021/4

Item Part No. Description Qty Item Part No. Description Qty1 H0520 Deck Painted 1500 1 41 M3176 Decal Bird Falcon Meduim 22 H1256 Disk 4-M22 PCD650 1 42 M3178 Decal Blade/Lem 13 H0404 Side panel 2 43 M3172 Decal DANGER STAY AWAY - ROTATING....... 14 H0603 Top mast Cat1/2 1 44 M3134 Decal F50/150/4 Slasher 15 T600960CE112F22 PTO shaft T60 960 112 F22 1 45 M3174 Decal IMPORTANT WHEN LOADING...... 16 H1300 Gearbox F50 1 46 M3173 Decal Lifting hook 17 H0202 Flap Rear 1500 1 47 M3175 Decal PROUD TO BE SOUTH AFRICAN 18 H0253 Skirt 1500 1 48 M3170 Decal VERY IMPORTANT BEFORE USING....... 19 H0655 Clevis Right +stop 1 49 M3117 Decal WARRANTY 2+3 WAARBORG............. 1

10 H0654 Clevis Left 1 50 M8400 Operators manual Slashers 111 H0702 PTO guard 112 H0102 Pin Hinge 1500 113 H0422 Skid runner 8x90 414 H0645 Pin Btm link Cat2/1 215 M52275 Blade bolt M22-10.9 Special 416 H0633 Pin Top link Cat2/1 117 H1801 Blade Banana 10x90x(440)-32.5 418 R0611 Chain GR5 10.0 219 H5357 Ganged bolts M16Fx55 220 M0623 Spacer 121 M62222 Nut Nyloc M22 422 M0622 Shackle 7/16in 1.5T 223 H71617 Bush 16x25x17 224 M61616 Nut Nyloc M16 625 M81603 Washer M16x40x3 226 M41655 Bolt M16x55HT 227 M41650 Bolt M16x50HT 428 M41450 Bolt M14x50HT 629 FLP11 Lynchpin 11mm 330 M91604 Washer Spring M16 631 M31410 Nut M14 632 M61616F Nut Nyloc M16F 433 M91002 Washer Spring M10 2134 M11025 Bolt+nut M10x25HT 1835 M11640 Bolt+nut M16x40HT 1236 M21030 Plough bolt+nut M10x30HT 2437 M3003 Serial plate 138 M3187 Decal ATTENTION If your tractor is .... 139 M3171 Decal Baie Belangrik Alvorens U Die 140 M3168 Decal Bird FALCON Large 1

F50-150-4 SlasherA0021-4

Bladsy/ Page 26

F50/180 Slasher A0023F50-180 Slasher

A0023

Bladsy/ Page 27


Item Part No. Description Qty Item Part No. Description Qty1 H0521 Deck Painted 1800 1 41 M3171 Decal Baie Belangrik Alvorens U Die 12 H0405 Side panel 2 42 M3168 Decal Bird FALCON Large 13 H0603 Top mast Cat1/2 1 43 M3176 Decal Bird Falcon Meduim 24 T600960CE112F22 PTO shaft T60 960 112 F22 1 44 M3178 Decal Blade/Lem 15 H0203 Flap Rear 1800 1 45 M3172 Decal DANGER STAY AWAY - ROTATING....... 16 H1300 Gearbox F50 1 46 M3136 Decal F50/180 Slasher 17 H0256 Skirt 1800 1 47 M3174 Decal IMPORTANT WHEN LOADING...... 18 H0655 Clevis Right +stop 1 48 M3173 Decal Lifting hook 19 H0654 Clevis Left 1 49 M3175 Decal PROUD TO BE SOUTH AFRICAN 1

10 H0702 PTO guard 1 50 M3170 Decal VERY IMPORTANT BEFORE USING....... 111 H0103 Pin Hinge 1800 1 51 M3117 Decal WARRANTY 2+3 WAARBORG............. 112 H1350 Blade beam 10x130 PCD1090 2 52 M8400 Operators manual Slashers 113 H0422 Skid runner 8x90 414 H0645 Pin Btm link Cat2/1 215 H0633 Pin Top link Cat2/1 116 H1804 Blade Banana 12x90x(345)-32.5 217 R0611 Chain GR5 10.0 118 M51963 Blade bolt 3/4UNCx2-1/2HT CSK 219 H5357 Ganged bolts M16Fx55 220 M0622 Shackle 7/16in 1.5T 221 H71617 Bush 16x25x17 222 M31612 Nut M16 223 M61616 Nut Nyloc M16 624 M81603 Washer M16x40x3 225 M41655 Bolt M16x55HT 226 M41650 Bolt M16x50HT 427 M41645 Bolt M16x45HT 228 M71914 Bush Hard 19x32x13 229 M41450 Bolt M14x50HT 430 M61921 Nut Nyloc 3/4UNC CSK 231 FLP11 Lynchpin 11mm 332 M91604 Washer Spring M16 1033 M31410 Nut M14 434 M61616F Nut Nyloc M16F 435 M91002 Washer Spring M10 2236 M11025 Bolt+nut M10x25HT 2037 M11640 Bolt+nut M16x40HT 1638 M21030 Plough bolt+nut M10x30HT 2439 M3003 Serial plate 140 M3187 Decal ATTENTION If your tractor is .... 1


Bladsy/ Page 28

F50/180/4 Slasher A0023/4

F50-180-4 SlasherA0023-4

Bladsy/ Page 29

F50/180/4 Slasher A0023/4

Item Part No. Description Qty Item Part No. Description Qty1 H0521 Deck Painted 1800 1 41 M3172 Decal DANGER STAY AWAY - ROTATING....... 12 H1256 Disk 4-M22 PCD650 1 42 M3137 Decal F50/180/4 Slasher 13 H0405 Side panel 2 43 M3174 Decal IMPORTANT WHEN LOADING...... 14 H0603 Top mast Cat1/2 1 44 M3173 Decal Lifting hook 15 T600960CE112F22 PTO shaft T60 960 112 F22 1 45 M3175 Decal PROUD TO BE SOUTH AFRICAN 16 H0203 Flap Rear 1800 1 46 M3170 Decal VERY IMPORTANT BEFORE USING....... 17 H1300 Gearbox F50 1 47 M3117 Decal WARRANTY 2+3 WAARBORG............. 18 H0256 Skirt 1800 1 48 M8400 Operators manual Slashers 19 H0655 Clevis Right +stop 1

10 H1810 Blade Banana 10x90x(585)-32.5 411 H0654 Clevis Left 112 H0702 PTO guard 113 H0103 Pin Hinge 1800 114 H0422 Skid runner 8x90 415 H0645 Pin Btm link Cat2/1 216 M52275 Blade bolt M22-10.9 Special 417 H0633 Pin Top link Cat2/1 118 R0611 Chain GR5 10.0 119 H5357 Ganged bolts M16Fx55 220 M62222 Nut Nyloc M22 421 M0622 Shackle 7/16in 1.5T 222 H71617 Bush 16x25x17 223 M81603 Washer M16x40x3 224 M41655 Bolt M16x55HT 225 M41650 Bolt M16x50HT 426 M41450 Bolt M14x50HT 627 FLP11 Lynchpin 11mm 328 M91604 Washer Spring M16 829 M31410 Nut M14 630 M61616F Nut Nyloc M16F 1031 M91002 Washer Spring M10 2232 M11025 Bolt+nut M10x25HT 2033 M11640 Bolt+nut M16x40HT 1634 M21030 Plough bolt+nut M10x30HT 2435 M3003 Serial plate 136 M3187 Decal ATTENTION If your tractor is .... 137 M3171 Decal Baie Belangrik Alvorens U Die 138 M3168 Decal Bird FALCON Large 139 M3176 Decal Bird Falcon Meduim 240 M3178 Decal Blade/Lem 1

F50-180-4 SlasherA0023-4

Bladsy/ Page 30

F50/150RG Slasher A0026

F50-150RG SlasherA0026

Bladsy/ Page 31


Item Part No. Description Qty Item Part No. Description Qty1 H0524 Deck Painted 1500 1 41 M3140 Decal F50/150RG Slasher 12 H1256 Disk 4-M22 PCD650 1 42 M3174 Decal IMPORTANT WHEN LOADING...... 13 H0603 Top mast Cat1/2 1 43 M3173 Decal Lifting hook 14 T600960CE112F22 PTO shaft T60 960 112 F22 1 44 M3175 Decal PROUD TO BE SOUTH AFRICAN 15 H0416 Side panel 1 45 M3170 Decal VERY IMPORTANT BEFORE USING....... 16 H0416LH Side panel 1 46 M3117 Decal WARRANTY 2+3 WAARBORG............. 17 H1300 Gearbox F50 1 47 M8400 Operators manual Slashers 18 H0255 Skirt 1500 19 H0866 Guard kit 1

10 H0702 PTO guard 111 H0429 Skid runner 8x90 212 H0645 Pin Btm link Cat2/1 213 M52275 Blade bolt M22-10.9 Special 414 H0633 Pin Top link Cat2/1 115 H1801 Blade Banana 10x90x(440)-32.5 416 R0611 Chain GR5 10.0 117 H5357 Ganged bolts M16Fx55 218 M62222 Nut Nyloc M22 419 M0622 Shackle 7/16in 1.5T 220 H71617 Bush 16x25x17 221 M61616 Nut Nyloc M16 222 M81603 Washer M16x40x3 223 M41655 Bolt M16x55HT 224 M41450 Bolt M14x50HT 625 FLP11 Lynchpin 11mm 326 M91604 Washer Spring M16 827 M31410 Nut M14 628 M91213 Washer Spring M12 Galv 629 M61616F Nut Nyloc M16F 430 M91002 Washer Spring M10 1031 M11025 Bolt+nut M10x25HT 832 M11640 Bolt+nut M16x40HT 2833 M21030 Plough bolt+nut M10x30HT 1234 M3003 Serial plate 135 M3187 Decal ATTENTION If your tractor is .... 136 M3171 Decal Baie Belangrik Alvorens U Die 137 M3168 Decal Bird FALCON Large 138 M3176 Decal Bird Falcon Meduim 239 M3178 Decal Blade/Lem 140 M3172 Decal DANGER STAY AWAY - ROTATING....... 1


Bladsy/ Page 32



Bladsy/ Page 33


Item Part No. Description Qty Item Part No. Description Qty1 H0526 Deck Painted 1800 1 41 M3172 Decal DANGER STAY AWAY - ROTATING....... 12 H1256 Disk 4-M22 PCD650 1 42 M3142 Decal F50/180RG Slasher 13 H0603 Top mast Cat1/2 1 43 M3174 Decal IMPORTANT WHEN LOADING...... 14 H0459 Side panel 2 44 M3173 Decal Lifting hook 15 T600960CE112F22 PTO shaft T60 960 112 F22 1 45 M3175 Decal PROUD TO BE SOUTH AFRICAN 16 H1300 Gearbox F50 1 46 M3170 Decal VERY IMPORTANT BEFORE USING....... 17 H0256 Skirt 1800 1 47 M3117 Decal WARRANTY 2+3 WAARBORG............. 18 H0867 Guard kit 1 48 M8400 Operators manual Slashers 19 H0655 Clevis Right +stop 1

10 H1810 Blade Banana 10x90x(585)-32.5 411 H0654 Clevis Left 112 H0702 PTO guard 113 H0645 Pin Btm link Cat2/1 214 M52275 Blade bolt M22-10.9 Special 415 H0430 Skid runner 8x90 416 H0633 Pin Top link Cat2/1 117 R0611 Chain GR5 10.0 118 H5357 Ganged bolts M16Fx55 219 M62222 Nut Nyloc M22 420 M0622 Shackle 7/16in 1.5T 221 H71617 Bush 16x25x17 222 M61616 Nut Nyloc M16 623 M81603 Washer M16x40x3 224 M41655 Bolt M16x55HT 225 M41650 Bolt M16x50HT 426 M41450 Bolt M14x50HT 627 FLP11 Lynchpin 11mm 328 M91604 Washer Spring M16 629 M31410 Nut M14 630 M61616F Nut Nyloc M16F 431 M91002 Washer Spring M10 2132 M11025 Bolt+nut M10x25HT 1833 M11640 Bolt+nut M16x40HT 1234 M21030 Plough bolt+nut M10x30HT 2435 M3003 Serial plate 136 M3187 Decal ATTENTION If your tractor is .... 137 M3171 Decal Baie Belangrik Alvorens U Die 138 M3168 Decal Bird FALCON Large 139 M3176 Decal Bird Falcon Meduim 240 M3178 Decal Blade/Lem 1


Bladsy/ Page 34



Bladsy/ Page 35


Item Part No. Description Qty Item Part No. Description Qty1 H0530 Deck Painted 1500 1 41 M3144 Decal F80/150 Slasher 12 H1400A Gearbox F80 1 42 M3174 Decal IMPORTANT WHEN LOADING...... 13 H0404 Side panel 2 43 M3173 Decal Lifting hook 14 H0602 Top mast Cat2 1 44 M3175 Decal PROUD TO BE SOUTH AFRICAN 15 T600960CE112F22 PTO shaft T60 960 112 F22 1 45 M3170 Decal VERY IMPORTANT BEFORE USING....... 16 H0204 Flap Rear 1800 1 46 M3117 Decal WARRANTY 2+3 WAARBORG............. 17 H0205 Flap Rear 1800 1 47 M8400 Operators manual Slashers 18 H0702 PTO guard 19 H0102 Pin Hinge 1500 1

10 H1451 Blade beam 10x130 PCD645 211 H1448 Ganged bolts 3/4UNFx2-1/2 212 H0422 Skid runner 8x90 413 H0643 Pin Btm link Cat2 214 H0632 Pin Top link Cat2 115 H1805 Blade Banana 12x90x(410)-32.5 216 R0611 Chain GR5 10.0 117 M51963 Blade bolt 3/4UNCx2-1/2HT CSK 218 M61919 Nut Nyloc 3/4UNF 419 M0622 Shackle 7/16in 1.5T 220 H71914 Bush Hard 19x32x14 221 H71617 Bush 16x25x17 222 M31612 Nut M16 623 M61616 Nut Nyloc M16 224 M81603 Washer M16x40x3 225 M41655 Bolt M16x55HT 626 M41645 Bolt M16x45HT 227 M61921 Nut Nyloc 3/4UNC CSK 228 FLP11 Lynchpin 11mm 329 M91604 Washer Spring M16 1430 M11025 Bolt+nut M10x25HT 931 M11640 Bolt+nut M16x40HT 2432 M21030 Plough bolt+nut M10x30HT 2533 M91002 Washer Spring M10 1734 M3003 Serial plate 135 M3187 Decal ATTENTION If your tractor is .... 136 M3171 Decal Baie Belangrik Alvorens U Die 137 M3168 Decal Bird FALCON Large 138 M3176 Decal Bird Falcon Meduim 239 M3178 Decal Blade/Lem 140 M3172 Decal DANGER STAY AWAY - ROTATING....... 1


Bladsy/ Page 36

F80/150/4 Slasher A0031/4

F80-150-4 SlasherA0031-4

Bladsy/ Page 37

F80/150/4 Slasher A0031/4

Item Part No. Description Qty Item Part No. Description Qty1 H0530 Deck Painted 1500 1 41 M3174 Decal IMPORTANT WHEN LOADING...... 12 H1400A Gearbox F80 1 42 M3173 Decal Lifting hook 13 H1260 Disk 4-M22 PCD650 1 43 M3175 Decal PROUD TO BE SOUTH AFRICAN 14 H0406 Side panel 2 44 M3170 Decal VERY IMPORTANT BEFORE USING....... 15 H0602 Top mast Cat2 1 45 M3117 Decal WARRANTY 2+3 WAARBORG............. 16 T600960CE112F22 PTO shaft T60 960 112 F22 1 46 M8400 Operators manual Slashers 17 H0204 Flap Rear 1800 18 H0205 Flap Rear 1800 19 H0702 PTO guard 1

10 H0102 Pin Hinge 1500 111 H1448 Ganged bolts 3/4UNFx2-1/2 212 H0422 Skid runner 8x90 413 H0643 Pin Btm link Cat2 214 M52275 Blade bolt M22-10.9 Special 415 H0632 Pin Top link Cat2 116 H1801 Blade Banana 10x90x(440)-32.5 417 R0611 Chain GR5 10.0 118 M62222 Nut Nyloc M22 419 M61919 Nut Nyloc 3/4UNF 420 M0622 Shackle 7/16in 1.5T 221 H71617 Bush 16x25x17 222 M31612 Nut M16 623 M61616 Nut Nyloc M16 224 M81603 Washer M16x40x3 225 M41655 Bolt M16x55HT 226 M41650 Bolt M16x50HT 627 FLP11 Lynchpin 11mm 328 M91604 Washer Spring M16 1229 M91002 Washer Spring M10 1730 M11025 Bolt+nut M10x25HT 1031 M11640 Bolt+nut M16x40HT 2432 M21030 Plough bolt+nut M10x30HT 2433 M3003 Serial plate 134 M3187 Decal ATTENTION If your tractor is .... 135 M3171 Decal Baie Belangrik Alvorens U Die 136 M3168 Decal Bird FALCON Large 137 M3176 Decal Bird Falcon Meduim 238 M3178 Decal Blade/Lem 139 M3172 Decal DANGER STAY AWAY - ROTATING....... 140 M3145 Decal F80/150/4 Slasher 1

F80-150-4 SlasherA0031-4

Bladsy/ Page 38



Bladsy/ Page 39


Item Part No. Description Qty Item Part No. Description Qty1 H0531 Deck Painted 1800 1 41 M3148 Decal F80/180 Slasher 12 H1400A Gearbox F80 1 42 M3174 Decal IMPORTANT WHEN LOADING...... 13 H0404 Side panel 2 43 M3173 Decal Lifting hook 14 H0602 Top mast Cat2 1 44 M3175 Decal PROUD TO BE SOUTH AFRICAN 15 T600960CE112F22 PTO shaft T60 960 112 F22 1 45 M3170 Decal VERY IMPORTANT BEFORE USING....... 16 H1452 Blade beam 10x130 PCD945 2 46 M3117 Decal WARRANTY 2+3 WAARBORG............. 17 H0207 Flap Rear 1800 1 47 M8400 Operators manual Slashers 18 H0206 Flap Rear 1800 19 H0702 PTO guard 1

10 H0103 Pin Hinge 1800 111 H1448 Ganged bolts 3/4UNFx2-1/2 212 H0422 Skid runner 8x90 413 H0643 Pin Btm link Cat2 214 H0632 Pin Top link Cat2 115 H1805 Blade Banana 12x90x(410)-32.5 216 R0611 Chain GR5 10.0 117 M51963 Blade bolt 3/4UNCx2-1/2HT CSK 218 M61919 Nut Nyloc 3/4UNF 419 M0622 Shackle 7/16in 1.5T 220 H71914 Bush Hard 19x32x14 221 H71617 Bush 16x25x17 222 M31612 Nut M16 623 M61616 Nut Nyloc M16 224 M81603 Washer M16x40x3 225 M41655 Bolt M16x55HT 626 M41645 Bolt M16x45HT 227 M61921 Nut Nyloc 3/4UNC CSK 228 FLP11 Lynchpin 11mm 329 M91604 Washer Spring M16 1430 M91002 Washer Spring M10 1731 M11025 Bolt+nut M10x25HT 1032 M11640 Bolt+nut M16x40HT 2433 M21030 Plough bolt+nut M10x30HT 2434 M3003 Serial plate 135 M3187 Decal ATTENTION If your tractor is .... 136 M3171 Decal Baie Belangrik Alvorens U Die 137 M3168 Decal Bird FALCON Large 138 M3176 Decal Bird Falcon Meduim 239 M3178 Decal Blade/Lem 140 M3172 Decal DANGER STAY AWAY - ROTATING....... 1


Bladsy/ Page 40

F80/180/4 Slasher A0034/4F80-180-4 Slasher

A0034-4

Bladsy/ Page 41

F80/180/4 Slasher A0034/4

Item Part No. Description Qty Item Part No. Description Qty1 H0531 Deck Painted 1800 1 41 M3174 Decal IMPORTANT WHEN LOADING...... 12 H1400A Gearbox F80 1 42 M3173 Decal Lifting hook 13 H1260 Disk 4-M22 PCD650 1 43 M3175 Decal PROUD TO BE SOUTH AFRICAN 14 H0406 Side panel 2 44 M3170 Decal VERY IMPORTANT BEFORE USING....... 15 H0602 Top mast Cat2 1 45 M3117 Decal WARRANTY 2+3 WAARBORG............. 16 T600960CE112F22 PTO shaft T60 960 112 F22 1 46 M8400 Operators manual Slashers 17 H0207 Flap Rear 1800 18 H0206 Flap Rear 1800 19 H1810 Blade Banana 10x90x(585)-32.5 4

10 H0702 PTO guard 111 H0103 Pin Hinge 1800 112 H1448 Ganged bolts 3/4UNFx2-1/2 213 H0422 Skid runner 8x90 414 H0643 Pin Btm link Cat2 215 M52275 Blade bolt M22-10.9 Special 416 H0632 Pin Top link Cat2 117 R0611 Chain GR5 10.0 118 M62222 Nut Nyloc M22 419 M61919 Nut Nyloc 3/4UNF 420 M0622 Shackle 7/16in 1.5T 221 H71617 Bush 16x25x17 222 M31612 Nut M16 623 M61616 Nut Nyloc M16 224 M81603 Washer M16x40x3 225 M41655 Bolt M16x55HT 226 M41650 Bolt M16x50HT 627 FLP11 Lynchpin 11mm 328 M91604 Washer Spring M16 1229 M91002 Washer Spring M10 1730 M11025 Bolt+nut M10x25HT 1031 M11640 Bolt+nut M16x40HT 2432 M21030 Plough bolt+nut M10x30HT 2433 M3003 Serial plate 134 M3187 Decal ATTENTION If your tractor is .... 135 M3171 Decal Baie Belangrik Alvorens U Die 136 M3168 Decal Bird FALCON Large 137 M3176 Decal Bird Falcon Meduim 238 M3178 Decal Blade/Lem 139 M3172 Decal DANGER STAY AWAY - ROTATING....... 140 M3149 Decal F80/180/4 Slasher 1

F80-180-4 SlasherA0034-4

Bladsy/ Page 42



Bladsy/ Page 43

Item Part No. Description Qty Item Part No. Description Qty1 H0542A Deck Painted 2000 1 41 M3152 Decal F80/200 Slasher 12 H1400A Gearbox F80 1 42 M3174 Decal IMPORTANT WHEN LOADING...... 13 H0404 Side panel 2 43 M3173 Decal Lifting hook 14 H0602 Top mast Cat2 1 44 M3175 Decal PROUD TO BE SOUTH AFRICAN 15 T600960CE112F22 PTO shaft T60 960 112 F22 1 45 M3170 Decal VERY IMPORTANT BEFORE USING....... 16 H1452 Blade beam 10x130 PCD945 2 46 M3117 Decal WARRANTY 2+3 WAARBORG............. 17 H0213 Guard 2 47 M3003 Serial plate 18 H0214 Guard 2 48 M8400 Operatos manual Slashers 19 H0702 PTO guard 1

10 H0215 Guard 211 H1448 Ganged bolts 3/4UNFx2-1/2 212 H7115 Pin Btm link Cat2-125 213 H1809 Blade Banana 12x90x(545)-38.5 214 H0422 Skid runner 8x90 415 H0632 Pin Top link Cat2 116 R0611 Chain GR5 10.0 117 M51963 Blade bolt 3/4UNCx2-1/2HT CSK 218 M61919 Nut Nyloc 3/4UNF 419 M0622 Shackle 7/16in 1.5T 220 H71617 Bush 16x25x17 221 M31612 Nut M16 622 M61616 Nut Nyloc M16 223 M81603 Washer M16x40x3 224 M41655 Bolt M16x55HT 625 M41645 Bolt M16x45HT 226 M61921 Nut Nyloc 3/4UNC CSK 227 M73814 Bush Hard 19x38x13 228 FLP11 Lynchpin 11mm 329 M91604 Washer Spring M16 1430 M91002 Washer Spring M10 2831 M11025 Bolt+nut M10x25HT 832 M11040 Bolt+nut M10x25HT 2433 M11640 Bolt+nut M16x40HT 2434 M21030 Plough bolt+nut M10x30HT 2435 M3187 Decal ATTENTION If your tractor is .... 136 M3171 Decal Baie Belangrik Alvorens U Die 137 M3168 Decal Bird FALCON Large 138 M3176 Decal Bird Falcon Meduim 239 M3178 Decal Blade/Lem 140 M3172 Decal DANGER STAY AWAY - ROTATING....... 1



Bladsy/ Page 44

F80/200/4 Slasher A0037/4

F80-200-4 SlasherA0037-4

Bladsy/ Page 45

F80/200/4 Slasher A0037/4

Item Part No. Description Qty Item Part No. Description Qty1 H0542A Deck Painted 2000 1 41 M3172 Decal DANGER STAY AWAY - ROTATING....... 12 H1400A Gearbox F80 1 42 M3153 Decal F80/200/4 Slasher 13 H1260 Disk 4-M22 PCD650 1 43 M3174 Decal IMPORTANT WHEN LOADING...... 14 H0406 Side panel 2 44 M3173 Decal Lifting hook 15 H0602 Top mast Cat2 1 45 M3175 Decal PROUD TO BE SOUTH AFRICAN 16 T600960CE112F22 PTO shaft T60 960 112 F22 1 46 M3170 Decal VERY IMPORTANT BEFORE USING....... 17 H0213 Guard 2 47 M3117 Decal WARRANTY 2+3 WAARBORG............. 18 H0214 Guard 2 48 M8400 Operators manual Slashers 19 H0702 PTO guard 1

10 H1901 Blade Banana 12x90x(720)-32.5 411 H0215 Guard 212 H1448 Ganged bolts 3/4UNFx2-1/2 213 H7115 Pin Btm link Cat2-125 214 H0422 Skid runner 8x90 415 M52275 Blade bolt M22-10.9 Special 416 H0632 Pin Top link Cat2 117 R0611 Chain GR5 10.0 118 M62222 Nut Nyloc M22 419 M61919 Nut Nyloc 3/4UNF 420 M0622 Shackle 7/16in 1.5T 221 H71617 Bush 16x25x17 222 M31612 Nut M16 623 M61616 Nut Nyloc M16 224 M81603 Washer M16x40x3 225 M41655 Bolt M16x55HT 226 M41650 Bolt M16x50HT 627 FLP11 Lynchpin 11mm 328 M82202 Washer 22.5x32x2 429 M91604 Washer Spring M16 1230 M91002 Washer Spring M10 2831 M11025 Bolt+nut M10x25HT 832 M11040 Bolt+nut M10x25HT 2433 M11640 Bolt+nut M16x40HT 2434 M21030 Plough bolt+nut M10x30HT 2435 M3003 Serial plate 136 M3187 Decal ATTENTION If your tractor is .... 137 M3171 Decal Baie Belangrik Alvorens U Die 138 M3168 Decal Bird FALCON Large 139 M3176 Decal Bird Falcon Meduim 240 M3178 Decal Blade/Lem 1

F80-200-4 SlasherA0037-4

Bladsy/ Page 46

Falcon F50 Gearbox H1300

Item Part No. Description Qty1 H1310 Gear Bevel Z29/z10 12 M1311 Bearing L44610 13 M1312 Bearing L44649 14 M1313 Shim 35x49x0.25 A/R4 1341 Shim 35x49x0.5 A/R4 1342 Shim 35x49x1.0 A/R5 H1309 Shaft Input 1-3/8 Z6 16 M1306 Bearing LM48510 17 M1307 Bearing LM48548 18 H1308 Washer Hard 50x35x4 19 M1301 Seal Radial lip 137227 1

10 M81201 Washer Star M12 611 H1303 Input cover F50 112 M1304 Gasket Input F50 113 M1305 Shim 0.1mm Plastic A/R14 M1334 Plug + Dipstick F50 115 M41225 Bolt M12x25HT 1016 H1321A Cover Gearbox F50 117 M1320 Gasket Top F50 118 H1314 Housing F50 119 M1319 Nut Slotted 1.0UNF 120 M1343 Washer 40x26x2 121 H1318 Gear Bevel Z16/z6 122 M1407 Bearing LM29749 123 M1408 Bearing LM29710 124 H1324 Retainer Domed 125 M1327 Bearing 603011 126 M1328 Bearing 603049 127 M1325 Seal Radial lip 103905 228 M1326 Seal Felt 75x50x10 129 H1323 Dust cover 130 M41045 Bolt M10x45HT 231 M31007 Nut M10 232 H1315 Shaft Output F50 133 M1416 Split pin B5x60 1

Gearbox F50H1300

Bladsy/ Page 47

Falcon F80 Gearbox H1400A

Item Part No. Description Qty1 M1413 Bearing 390 12 M1412 Bearing 394A 13 H1414 Gear Bevel Z28/z6 14 H82802 Washer 29x50x4 15 M1415 Nut Slotted 1-1/8in 16 M41225 Bolt M12x25HT 127 M81201 Washer Star M12 88 H1410 Input cover F80 19 M1434 Shim Input 0.1 Plastic A/R

10 M1411 Gasket Input F80 111 H1409 Shaft Input 1-3/8 Z6 112 M1408 Bearing LM29710 113 M1407 Bearing LM29749 114 M1404 Seal Lip 187275 115 M1406 O-ring 34.5x3.5 116 H1405 Seal Lip 117 M1403 Washer Tabbed KM06 118 H1402 Locknut M36x2.0 119 M1439 Plug + Dipstick 120 H1420A Cover Gearbox F80 121 M1421A Gasket Top F80 122 H1417A Housing F80 123 H1428 Dust cover 124 M41045 Bolt M10x45HT 225 M31007 Nut M10 226 M1422 Nut Slotted 1-1/4in 127 M1446 Washer Hard 32x50x2 128 H1423 Gear Beval Z15/z10 129 M1441 Shim 38x60x0.5 A/R30 M1440 Shim 38x60x0.25 A/R31 M1442 Shim 38x60x1.0 A/R32 M1424 Bearing 3577 133 M1425 Bearing 3525 134 H1429 Retainer Domed 135 M1430 Bearing 28920 136 M1431 Bearing 28985 137 M1432 Seal Lip 300400 238 M1433 Seal Felt 75x100x12 139 H1426 Shaft Output F80 140 M1416 Split pin B5x60 2

Gearbox F80H1400A

inhoud / contents - home - falcon...

Documents