inner door locks. project locks. - nemef

nemef.com ASSA ABLOY, the global leaderin door opening solutions

Inner door locks.Project locks.Narrow style locks.

Mortise locks.

Mortise locks.

In the future we’ll also meet the demands for technical advances and innovations. We therefore reserve the right to make design modifications. Illustrations may thus also vary from the actual products. Despite thegreatest of care, printing errors or mistakes may be made. Nemef acceptsno responsibility in such cases and will not enter into any obligations ofany kind. No responsibility is taken for the correctness of any safetyregulations reproduced.

ASSA ABLOY Nederland B.V. guarantees an extensive and continually growing assortment of locks and builders’ hardware, such as door locks, profile cylinders, multi-point locks and access control. These quality products that leave the ASSA ABLOY plant reach their customers quickly and efficiently due to a hypermodern distribution centre in the Netherlands.

ASSA ABLOY is working today on the standard for tomorrow through innovative product development focused on contemporary user convenience. Within this brochure we give an overview of mortise locks.

Mortise locks.

PageInformation Information about locks 4

D140 Inner door locks according to DIN 18251-1 class 1 8


D141 SD Inner door locks VDS testet, according to DIN 18251-1 class 2 13


D196 Project locks according to DIN 18251-1 class 3 16



D542 Mortise X-ray locks according to DIN 18251-1 class 4 23

D066 Lockbody with spring loaded-hub 24

D118 Mortise dead lock 25

D125 Mortise latch lock 27

D126 Mortise latch lock 28

D153 Mortise sash lock 29

D161 PZW Sliding door lock with hook bolt 30

D162 Mortise sliding door lock with rim dead bolt 31

D166 Mortise sliding door lock with hook bolt 32

D167 PZ Mortise sliding door lock with pull handle. 33

D171 Roller bolt lock with dead bolt 34

340 Series mortise locks 35

6100 Series Project locks according to DIN 18251-1 class 3 36

6600 Series Project locks according to DIN 18251-1 class 3 37

D150 Glass door lock 38

D301 Narrow style sash lock 39

D305 Narrow style dead lock 40

D307 Narrow style latch 41

4128 Security dead lock 42

4169 Narrow style security sash lock 43

4185 Narrow style security pivot dead bolt lock 44

8691 Narrow style sash lock 45




9620 Narrow style latch 50 9630 Narrow style night latch 51

9640 Narrow style dead lock (small case) 52

9650 Narrow style dead lock (large case) 53

9660 Narrow style pivot dead bolt lock 54

9670 Narrow style panic lock 55

9680 Narrow style roller bolt lock 56

9690 Narrow style hook bolt lock 57

Strike plates Strike plates 58

4

Information about locks.

InternationalSituation Symbols

inside

outside

DIN Left (1) DIN Right (2)

inside

outside

DIN Left (3) DIN Right (4)

Do not fix a knob profile cylinder in lock of panic doors.

Do not fit the square spindle with force.

Do not paint front, dead- and latch bolt.

If door furniture is not fixed do not throw dead bolt. Locks must be replaced when signs of damage are obvious.

Do not leave a key in the lock of panic locks.

Do not force door trim.

Do not drill through lockcases.

5

Overview of the EuropeanEN Standards for building hardware.

• Resistance/reliability.• Durability.• Safety.• Ease-of-use.• Guaranteed operability.• Dimensions.• Mechanical resistance.

In public buildings• Hospital.• Shopping centre.• Station.• Airport.

In private buildings• Apartment block.• Office.

• Emergency exit devices operated by a lever handle or push pad, for use on escape routes.

• Requirements and test methods.

• Panic exit devices operated by a horizontal bar, for use on escape routes.

• Requirements and test methods.

• Locks and latches.• Mechanically operated locks, latches and

locking plates.• Requirements and test methods.

Mechanically operated locks, latches and panic and emergency exit devices intended for use on fire/ smoke control doors within the European Economic Area are covered by Construction Products Directive mandate issued by the European Commission. Consequently, this standard is regarded as “harmonised” and compliance with it, supported by suitable evidence, allows for the application of the CE mark.

What are the advantages of anEN-tested product?

Where do thestandards apply?

EN 179

EN 1125

EN 12209

CE marking

6

EN 12209 Locks and latches - Mechanicallyoperated locks, latches and locking plates -Requirements and test methods.

Use

Specifications for the locking mechanism for emergency exits in accordance with theEN 12209 standard.

Classification

Nemef productsthat comply with theEN 12209 standard

This European standard specifies the requirements and test methods for durability, resistance, security, operation of the mechanical locks and their locking plates in accordance with the usage profile for the door. The correct grade must be chosen in line with the usage profile.

• Operation tested between -20°C and +80°C.• Category of use: - Grade 1: average frequency of use, very careful

users => private use. - Grade 2: high frequency of use, careful users =>

interior doors in offices. - Grade 3: very high frequency of use, high

probability of abuse => offices in public buildings.

• Durability: in accordance with the cycles and load on the day latch.

• Fire resistance: - Grade 0: not CF-approved. - Grade 1: CF-approved.• Safety.• Corrosion resistance.• Security.

The EN 12209 standard uses an 11 digit code to classify the mechanical locks.

Mechanical locks with a panic function and automatic locking.

1 2 3

A 1

B 2

C 3

F 4

G 5

H 6

L 7

M 8

R 9

S

W

X

1

2

3

Cate

gory

of u

se

Dur

abili

ty a

nd lo

ad o

n th

e da

y la

tch

Doo

r wei

ght a

nd c

losi

ng

forc

e

Low risk of abuse, verycareful users=>PRIVATE USE.

50,000 cycles,no load.

100,000 cycles, no load.

200,000 cycles,no load.

50,000 cycles,10 N load.









Up to 100 kg,50 N maximum.



More than 200 kgor as indicated,25 N maximum.






Risk of abuse, careful users=>OFFICES.

High frequency of use by thepublic, with a high risk of abuse => PUBLIC BUILDINGS.

7

Classification EN 12209: 2003/AC: 2005.

4 5 6 7 8 9 10 11

0 1 A 0 0

A 2 B A A

B 3 C B B

C 4 D C C

D 5 E D

DE 6 F E

EF 7 G F

F

G H G

G

J H

H

0 K

0 L

M

1 N 0

P 1

R 2

3

4

Fire

resi

stan

ce

Safe

ty

Corr

osio

n re

sist

ance

and

te

mpe

ratu

re re

sist

ance

Secu

rity:

resi

stan

ceto

att

ack

usin

g a

drill

Area

of a

pplic

atio

nof

the

door

Type

of k

ey o

peni

ng:

latc

h m

echa

nism

Type

of s

quar

e sh

aft

Iden

tifica

tion

of th

e ke

y

Minimal; no resistance.

Mortise lock;without limitationon the application.

Not applicable. No requirements.

Weak; no resistance.

Mortise lock; hinged door.

Cylinder lock; manual.

At least 3 locking pins.

Average;no resistance.

Mortise lock;sliding door.

Cylinder lock; automatic. At least 5 locking pins.

High;no resistance.

Very high;no resistance.

Face-fit lock; sliding door.

Lever lock;automatic.

With knob or sprung lever.

At least 6 locking pins with an extensive number

of combinations.

Face-fit lock; hinged door, latch on interior face.

Mortise lock;hinged door;supported.

Lock withoutkey; manual.

With unsprung leverfor intensive use.

At least 7 locking pinswith an extensive number

of combinations.

Mortise lock; hinged door;supported, latch on interior face.

High; with resistance.

Face-fit lock;hinged door. Lever lock; manual.

Lock without lock shaft aperture.

At least 6 locking pins.

Very high;with resistance.

Mortise lock;without limitationon the application.

Lever lock; manual with intermediary.

With unsprung lever.

At least 7 locking pins .

Face-fit lock; sliding door, latch on interior face.

Face-fit lock; hinged door, opening tothe exterior.

Lock with night latch without key; automatic.

With sprung lever for intensive use indicated by the manufacturer.

At least 8 locking pinswith an extensive number

of combinations.

Face-fit lock; hinged door, opening to the interior, latch on interior face.

Mortise lock; hingeddoor, latch on interior face.

No requirements

Not suitable for use on fire doors and/or smoke containment doors.

Suitable for use on fire doors and/or smoke containment doors.

No requirements.

Low resistance; no requirements.

Average resistance; no requirements.

High resistance; no requirements.

Very high resistance;no requirements.

Average resistance; between -20°Cand +80°C.

High resistance; between -20°C and +80°C.

Very high resistance; between -20°Cand +80°C.

Mortise lock; sliding door, latch on interior face.

Face-fit lock;without limitation on the application.

Cylinder lock; manual with intermediary.

At least 3 locking pins with an extensive number

of combinations.

8

D140.BB inner door lock.

• To take key. • Backset 55 mm.• Distance 72 mm.• Follower 8 mm plastic.• Front plate alu finish laquered.• Single throw.• With 1 key mounted on front plate

Differs 15, 16, 35 und 36.• Latch and dead bolt pvc (K) or metal (G).• Handed.• Without strike plate.• According to DIN 18251-1, class 1.

D140

Type Front plate Shape Finish Handing Article nr.

D140 BB 18x235 mm Rounded Plastic DIN LH 9103621111

D140 BB 18x235 mm Rounded Plastic DIN RH 9103621112

D140 BB 18x235 mm Rounded Metal DIN LH 9103621151

D140 BB 18x235 mm Rounded Metal DIN RH 9103621152

D140 BB 18x235 mm Square Plastic DIN LH 9103622111

D140 BB 18x235 mm Square Plastic DIN RH 9103622112

D140 BB 20x235 mm Rounded Plastic DIN LH 9103623111

D140 BB 20x235 mm Rounded Plastic DIN RH 9103623112

D140 BB 20x235 mm Rounded Metal DIN LH 9103623151

D140 BB 20x235 mm Rounded Metal DIN RH 9103623152

D140 BB 20x235 mm Square Plastic DIN LH 9103624111

D140 BB 20x235 mm Square Plastic DIN RH 9103624112

D140 BB 20x235 mm Square Metal DIN LH 9103624151

D140 BB 20x235 mm Square Metal DIN RH 9103624152

9

D140.BATH/WC inner door lock.

• For bath/WC. • Backset 55 mm.• Distance 78 mm.• Follower 8 mm plastic.• Front plate alu finish laquered.• Single throw.• Latch and deadbolt pvc (K) or metal (G).• Handed.• Without strike plate.• According to DIN 18251-1, class 1.

D140

Type Front plate Shape Latch / dead bolt Handing Article nr.

D140 BATH/WC 18x235 mm Rounded Plastic DIN LH 9103421111

D140 BATH/WC 18x235 mm Rounded Plastic DIN RH 9103421112

D140 BATH/WC 18x235 mm Rounded Metal DIN LH 9103421151

D140 BATH/WC 18x235 mm Rounded Metal DIN RH 9103421152

D140 BATH/WC 20x235 mm Rounded Plastic DIN LH 9103423111

D140 BATH/WC 20x235 mm Rounded Plastic DIN RH 9103423112



D140 BATH/WC 20x235 mm Square Plastic DIN LH 9103424111

D140 BATH/WC 20x235 mm Square Plastic DIN RH 9103424112

D140 BATH/WC 20x235 mm Square Metal DIN LH 9103424151

D140 BATH/WC 20x235 mm Square Metal DIN RH 9103424152



10

D141.PZW Inner door lock.

• To take profile cylinder. • Key action on latch bolt.• Backset 55 mm.• Distance 72 mm.• Combination tension follower 8 mm.• Front plate alu finish laquered

or stainless steel.• Double throw.• Latch and dead bolt diecast zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.

D141


D141 PZW 18x235 mm Rounded Alu finish lacq. DIN LH 9751410027

D141 PZW 18x235 mm Rounded Alu finish lacq. DIN RH 9751410028

D141 PZW 18x235 mm Square Alu finish lacq. DIN LH 9751410038

D141 PZW 18x235 mm Square Alu finish lacq. DIN RH 9751410037

D141 PZW 20x235 mm Rounded Stainless steel DIN LH 9751410008

D141 PZW 20x235 mm Rounded Stainless steel DIN RH 9751410009









11

D141.BB Inner door lock.

• To take key.• Backset 55 mm.• Distance 72 mm.• Combination tension follower 8 mm.• Front plate alu finish laquered

or stainless steel.• Double throw.• With 1 key.• Latch and dead bolt diecast zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.

D141


D141 BB 18x235 mm Rouded Alu finish lacq. DIN LH 9751410025

D141 BB 18x235 mm Rouded Alu finish lacq. DIN RH 9751410026

D141 BB 18x235 mm Square Alu finish lacq. DIN LH 9751410047

D141 BB 18x235 mm Square Alu finish lacq. DIN RH 9751410048

D141 BB 20x235 mm Rouded Stainless steel DIN LH 9751410000

D141 BB 20x235 mm Rouded Stainless steel DIN RH 9751410001

D141 BB 20x235 mm Rouded Alu finish lacq. DIN LH 9751410004

D141 BB 20x235 mm Rouded Alu finish lacq. DIN RH 9751410005

D141 BB 20x235 mm Square Alu finish lacq. DIN LH 9751410002

D141 BB 20x235 mm Square Alu finish lacq. DIN RH 9751410003

D141 BB 24x235 mm Rouded Stainless steel DIN LH 9751410006

D141 BB 24x235 mm Rouded Stainless steel DIN RH 9751410007

12

D141.BATH/WC Inner door lock.

• For bath.• Backset 55 mm.• Distance 78 mm.• Combination tension follower 8 mm.• Front plate alu finish laquered

or stainless steel.• Double throw.• Latch and dead bolt diecast zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.

D141


D141 BATH/WC 20X235 mm Rounded Stainless steel DIN LH 9751410021

D141 BATH/WC 20X235 mm Rounded Stainless steel DIN RH 9751410022

D141 BATH/WC 20X235 mm Rounded Alu finish lacq. DIN LH 9751410023

D141 BATH/WC 20X235 mm Rounded Alu finish lacq. DIN RH 9751410024

D141 BATH/WC 20X235 mm Square Alu finish lacq. DIN LH 9751410031

D141 BATH/WC 20X235 mm Square Alu finish lacq. DIN RH 9751410032

13

D141.PZW-SD Inner door lock.

• Requirements according to class 3, VDS tested.• To take profile cylinder. • Key action on latch bolt.• Backset 55 mm.• Distance 72 mm.• Cast Iron fix follower 8 mm.• Front plate alu finish laquered. • Double throw.• Latch cast iron nickle plated.• Dead bolt steel, zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.

D141


D141 SD 20x235 mm Rounded Alu finish lacq. DIN LH 9751410033

D141 SD 20x235 mm Rounded Alu finish lacq. DIN RH 9751410034

D141 SD 20x235 mm Square Alu finish lacq. DIN LH 9751410035

D141 SD 20x235 mm Square Alu finish lacq. DIN RH 9751410036

14

D147.PZW Mortise lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 55, 60 und 65 mm.• Distance 72 mm.• Combination tension follower 8 mm. • Front plate alu finish laquered

or stainless steel.• Double throw.• Latch and dead bolt steel, zinc plated.• Handed.• Without strike plate.• According DIN 18251-1, class 3.

D147

Type Backset Front plate Shape Finish Handing Article nr.

D147 PZW 55 mm 20x235 mm Rounded Alu finish lacq. DIN LH 9106913011

D147 PZW 55 mm 20x235 mm Rounded Alu finish lacq. DIN RH 9106913012

D147 PZW 55 mm 20x235 mm Square Alu finish lacq. DIN LH 9106914011

D147 PZW 55 mm 20x235 mm Square Alu finish lacq. DIN RH 9106914012

D147 PZW 55 mm 20x235 mm Rounded Stainless steel DIN LH 9106933011

D147 PZW 55 mm 20x235 mm Rounded Stainless steel DIN RH 9106933012



D147 PZW 55 mm 24x235 mm Square Stainless steel DIN LH 9106938011

D147 PZW 55 mm 24x235 mm Square Stainless steel DIN RH 9106938012



D147 PZW 60 mm 20x235 mm Square Alu finish lacq. DIN LH 9106914021

D147 PZW 60 mm 20x235 mm Square Alu finish lacq. DIN RH 9106914022











Version A B C D

PZW 55, 60, 65 72 20 20

15

D147.BATH/WC Mortise lock.

• For bath/WC.• Backset 55 und 60 mm.• Distance 78 mm.• Combination tension follower 8 mm. • Front plate stainless steel.• Double throw.• Latch and dead bolt steel, zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 3.

D147

Version A B C D

BATH/WC 55, 60 78 10 10


D147 BATH/WC 55 mm 20x235 mm Rounded Stainless steel DIN LH 9106433011

D147 BATH/WC 55 mm 20x235 mm Rounded Stainless steel DIN RH 9106433012







16

D196.PZW Project lock.

•To take profile cylinder.• Key action on latch bolt.• Backset 55, 60 und 65 mm.• Distance 72 mm.• Follower 8 mm.• Front plate stainless steel.• Double throw.• Latch and dead bolt nickle plated.• Handed.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.

D196

Type Backset Front plate Shape Handing Article nr.

D196 PZW 55 mm 20x235 mm Rounded DIN LH 9751960000

D196 PZW 55 mm 20x235 mm Rounded DIN RH 9751960001











Version A B C

PZW 55, 60, 65 72 20

17

D196.BATH/WC Project lock.

• For Bath/WC.• Backset 55, 60 und 65 mm.• Distance 78 mm.• Follower 8 mm. • Front plate stainless steel.• Double throw.• Latch and deadbolt nickle plated.• Handed.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.

D196


D196 BATH/WC 55 mm 20x235 mm Rounded DIN LH 9751960048

D196 BATH/WC 55 mm 20x235 mm Rounded DIN RH 9751960049











Version A B C

PZW 55, 60, 65 72 20

18


• To take profile cylinder.• Key action on latch bolt.• Backset 55, 60, 65, 70, 80 und 100 mm.• Distance 72 mm.• Fixed follower mounted in self-lubricating

sinter metal ring 8 mm.• Front plate stainless steel.• Double throw.• Latch and dead bolt steel nickle plated.• Latch stop with noise reduction.• Handed.• Option: with anti-friction latch bolt.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.

D197

Version A B C

PZW 55, 60, 65, 70, 80, 90, 100 72 20

19


Type Backset Front plate Shape Option Handing Article nr.



D197 PZW 55 mm 20x235 mm Rounded Anti-friction latch DIN LH 9700131021

D197 PZW 55 mm 20x235 mm Rounded Anti-friction latch DIN RH 9700131022

D197 PZW 55 mm 20x235 mm Square DIN LH 9700132001

D197 PZW 55 mm 20x235 mm Square DIN RH 9700132002



















D197 PZW 60 mm 24x235 mm Square Anti-friction latch DIN LH 9700236021

D197 PZW 60 mm 24x235 mm Square Anti-friction latch DIN RH 9700236022























20

D197.FA Latch.

• To take latch.• Backset 55 und 60 mm.• Fixed follower mounted in self-lubricating

sinter metal ring 8 mm.• Front plate stainless steel.• Latch steel nickle plated.• Latch stop with noise reduction.• Handed.• Without strike plate.• According to DIN 18251-1, class 3.

D197


D197 FA 55 mm 20x235 mm Rounded DIN LH 9703131001

D197 FA 55 mm 20x235 mm Rounded DIN RH 9703131002





D197 FA 60 mm 24x235 mm Square DIN LH 9703236001

D197 FA 60 mm 24x235 mm Square DIN RH 9703236002

21

D197.BATH/WC Project lock.

• For bath/WC.• Backset 55, 60 und 65 mm.• Entfernung 78 mm.• Fixed follower mounted in self-lubricating

sinter metal ring 8 mm.• Front plate stainless steel.• Double throw.• Latch and dead bolt steel nickle plated.• Latch stop with noise reduction.• Handed.• Option: with anti-friction latch bolt.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.

D197




D197 BATH/WC 55 mm 20x235 mm Rounded Anti-friction latch DIN LH 9704131021

D197 BATH/WC 55 mm 20x235 mm Rounded Anti-friction latch DIN RH 9704131022





D197 BATH/WC 55 mm 24x235 mm Square Anti-friction latch DIN LH 9704136021

D197 BATH/WC 55 mm 24x235 mm Square Anti-friction latch DIN RH 9704136022







D197 BATH/WC 60 mm 24x235 mm Square DIN LH 9704236001

D197 BATH/WC 60 mm 24x235 mm Square DIN RH 9704236002





Version A B C

PZW 55, 60, 65 78 10

22

D541.PZW Heavy duty project lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 55, 60 und 65 mm.• Distance 72 mm.• Fixed follower mounted in self-lubricating

sinter metal ring 8 mm.• Front plate stainless steel.• Double throw.• Malleable cast iron latch and polished

nickle plated steel bolt. • Latch stop with noise reduction.• Protective sleeves around fixing holes.• Handed.• Without strike plate (P7000/17).• According to DIN 18251-1, class 4.• VDS tested.

D541












Version A B C

PZW 55, 60, 65 72 20

23

D542.PZW Heavy duty mortise X-ray lock.

• To take profile cylinder.• Key action on both latch bolts.• Backset 40/80 mm.• Distance 72 mm.• Fixed follower mounted in self-lubricating

sinter metal ring 8 mm.• Front plate stainless steel.• Single throw.• Latch and dead bolt steel polished,

nickle plated. • Latch stop with noise reduction.• Handed.• Withouth strike plate (P7000/17).• According to DIN 18251-1.

D542


D542 PZW 40/80 mm 20x235 mm Rounded DIN LH 9748601001

D542 PZW 40/80 mm 20x235 mm Rounded DIN RH 9748601002

Interior M4threaded bushes !!

24

D066.Lockbody with spring loaded hub.

D066• For sample boards for functional

demontrations of handles.• Follower 8 mm.• Lock case zinc plated.

Type Article nr.

D066 9750660000

Fi

xing

hol

e

25

D118.PZ Mortise dead lock.

• To take profile cylinder.• Backset 55 und 60 mm• Follower 8 mm.• Front plate alu finish lacquered.• Dead bolt zinc plated.• Lock case zinc plated.• Non-handed.• Including strike plate.

D118

Type Backset Shape Finish Article nr.

D118 PZ 55 mm Rounded Alu finish lacq. 9751180006

D118 PZ 55 mm Square Stainless steel 9751180000

D118 PZ 55 mm Square Alu finish lacq. 9751180002

D118 PZ 60 mm Square Alu finish lacq. 9751180004

Version A B D E

PZ 55, 60 30 20 90

26

D118.BATH/WC dead lock.

D118• For bath.• Backset 55 mm.• Follower 8 mm.• Front plate alu finish lacquered or

stainless steel.• Dead bolt zinc plated.• Lock case zinc plated.• Non-handed.• Including strike plate.

Type Backset Shape Finish Article nr.

D118 BATH/WC 55 mm Rounded Stainless steel 9751180005

Version A B D E

BATH/WC 55 30 20 96

27

D125.Mortise latch.

• Backset 55 und 70 mm.• Fixed follower 8 mm.• Front plate alu finish lacquered or

stainless steel.• Latch zinc plated.• Handed.• Including strike plate.

D125


D125 55 mm 20x150 mm Rounded Alu finish lacq. DIN LH 9751250004

D125 55 mm 20x150 mm Rounded Alu finish lacq. DIN RH 9751250005

D125 70 mm 24x150 mm Rounded Stainless steel DIN LH 9751250006

D125 70 mm 24x150 mm Rounded Stainless steel DIN RH 9751250007

A B C

55, 70 30 93,5

28

D126.Mortise latch.

• To take profile cylinder. • Backset 55 mm.• Front plate stainless steel.• Latch zinc plated.• Handed.• Lock case zinc plated.• Including strike plate.

D126


D126 55 mm 20x150 mm Rounded Stainless steel DIN LH 9751260002

D126 55 mm 20x150 mm Rounded Stainless steel DIN RH 9751260003

A B C D

55 30 93,5 12

29

D153.PZW Mortise sash lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 55, 65 und 80 mm.• Distance 92 mm.• Follewer cast iron 10 mm.• Front plate alu finish lacquered.• Double throw.• Latch and dead bolt zinc plated.• Handed.• Lock case zinc plated.• Without strike plate.

D153


D153 55 mm 20x280 mm Square DIN LH 9751530015

D153 55 mm 20x280 mm Square DIN RH 9751530014



D153 65 mm 20x280 mm Rounded DIN LH 9751530000

D153 65 mm 20x280 mm Rounded DIN RH 9751530001



D153 65 mm 22x280 mm Rounded DIN LH 9751530016

D153 65 mm 22x280 mm Rounded DIN RH 9751530017











Version A B Comment

PZW 55, 65, 80 30 Partially open case

30

D161.PZW Sliding door lock with hook bolt.

• To take profile cylinder.• Key action on latch bolt.• Backset 65 mm.• Distance 72 mm.• Follower 9 mm.• Front plate stainless steel.• Non-handed.• Including strike plate.

D161

Type Backset Front plate Shape Finish Follower Article nr.

D161 65 mm 24x260 mm square Nirosta 9 mm 9751610002

31

D162.PZ/BB/BATH Mortise sliding door lockwith rim dead bolt.

• Backset 45, 55, 65 und 80 mm.• Frontplate alu finish lacquered

or stainless steel.• Rim dead bolt zinc plated.• Non-handed.• Lock case zinc plated.• Including strike plate.

D162

Type Backset Front plate Shape Finish Article nr.

D162 PZ 45 mm 20x150 mm Rounded Stainless steel 9751620009

D162 PZ 55 mm 20x150 mm Rounded Alu finish lacq. 9751620002


D162 PZ 55 mm 20x150 mm Square Alu finish lacq. 9751620007

D162 PZ 55 mm 20x150 mm Square Stainless steel 9751620000


D162 BATH/WC 55 mm 20x150 mm Rounded Stainless steel 9751620004

D162 BATH/WC 55 mm 20x150 mm Square Stainless steel 9751620003

D162 BB 55 mm 20x150 mm Rounded Stainless steel 9751620010

D162 BB 55 mm 20x150 mm Square Alu finish lacq. 9751620014

D162 BB 65 mm 20x150 mm Rounded Stainless steel 9751620011

Version A B C D E F G

PZ 45, 55, 65 87 32 62,5 150 11 128

BB 55, 65 95 32 62,5 150 11 128

BB S 55 95 32 62,5 150 11 128

BATH 55 95 32 62,5 150 11 128

32

D166.PZW/BATH Mortise sliding door lock with hook bolt.

• To take profile cylinder/for bath.• Backset 55 mm.• Distance 55 mm.• Frontplate alu finish lacquered

or stainless steel.• Hook bolt zinc plated.• Non-handed.• Lock case zinc plated.• Including strike plate.

D166


D166 PZW 55 mm 20x180 mm Rounded Alu finish lacq. 9751660005

D166 PZW 55 mm 20x180 mm Rounded Stainless steel 9751660006

D166 PZW 55 mm 20x180 mm Square Alu finish lacq. 9751660001

D166 PZW 55 mm 20x205 mm Rounded Alu finish lacq. 9751660008

D166 BATH/WC 55 mm 20x180 mm Rounded Stainless steel 9751660007


PZW 55 58 180 47 154 32 62

BATH/WC 55 58 180 47 154 32 62

33

D167.PZ Mortise sliding door lockwith pull handle.

• To take profile cylinder.• Backset 55 mm.• Front plate stainless steel.• Hook bolt polished nickel-plated.• Non-handed.• Including strike plate.

D167


D167 BBS 55 mm 20x270 mm Rounded stainless steel 9751670003


Version A B C D E F

BBS 55 101 52,5 86,2 270 15

PZ 55 101 52,5 86,2 270 15

34

D171.PZ Roller bolt lock with dead bolt.

• To take profile cylinder.• Backset 55 und 60 mm.• Frontplate alu finish lacquered

or stainless steel.• Rollfalle verstellbar aus Messing• Dead bolt nickle plated.• Non-handed.• Lock case zinc plated.• Including strike plate.

D171


D171 55 mm 24x235 mm Square Alu finish lack. 9751710000

D171 60 mm 20x235 mm Rounded Stainless steel 9751710001


PZ 55, 60 20 17 47 51,5 30 170

Adjustable from 5 to C

Adju

stin

g sc

rew

Adju

stin

g sc

rew

35

340 Serie.Mortise locks.

• Avaible as bath/WC- and sash lock.• PC-version to take profile cylinder.• Backset 50 und 60 mm.• Distance 72 mm (BATH/WC 78 mm).• Follower 8 mm.• Front plate stainless steel.• Latch and dead bolt steel zinc plated.• Non-handed.• Lock case steel, in- and outside grey lacquered.• Including strike plate.

340

Type Backset Front plate Shape Article nr.

344/33 50 mm 20x235 mm Rounded 9034433021

344/35 50 mm 20x235 mm Rounded 9034435021

344/36 50 mm 20x235 mm Square 9034436021

344/33 60 mm 24x235 mm Rounded 9034433031

344/35 60 mm 24x235 mm Rounded 9034435021

344/36 60 mm 24x235 mm Square 9034436031

345/33 50 mm 20x235 mm Rounded 9034533021

345/35 50 mm 24x235 mm Rounded 9034535021

345/36 50 mm 24x235 mm Square 9034536021

345/35 60 mm 24x235 mm Rounded 9034535031

348/33 50 mm 20x235 mm Rounded 9034833020

348/33 60 mm 20x235 mm Rounded 9034833030

348/36 60 mm 24x235 mm Square 9034836030

349/33 50 mm 20x235 mm Rounded 9034933021

349/35 50 mm 24x235 mm Rounded 9034935021

349/36 50 mm 24x235 mm Square 9034936021

349/33 60 mm 20x235 mm Rounded 9034933031

349/35 60 mm 24x235 mm Rounded 9034935031

349/36 60 mm 24x235 mm Square 9034936031

36

6100 Serie.Project locks.

• Available as - Bath/WC lock 6104. - Panic lock with splitted spindle 6102. - Sash lock 6109. - Night latch with hold back function 6107. - Latch 6105. - Dead lock 6108.

• PC-version to take profile cylinder.• Provided for profile cylinder and oval cylinder.• Backset 60 mm.• Distance 72 mm (BATH/WC 78 mm).• Combination tension follower 8 mm.• Loose front plate stainless steel.• Latch and dead bolt metal nickle plated.• Latch reversible.• Lock case steel, in- and outside white lacquered. • As per EN12209.• Lock dimensions according tot

DIN 18251 class 3.• Including strike plate and mounting

instructions.

6100


6102/17 60 mm 20x235 mm Square DIN LH fig. 1 9610217003

6102/17 60 mm 20x235 mm Square DIN RH fig. 2 9610217004

6102/17 60 mm 20x235 mm Square DIN LR fig. 3 9610217031

6102/17 60 mm 20x235 mm Square DIN RH fig. 4 9610217032

6104/17 60 mm 20x235 mm Square 9610417001

6105/17 60 mm 20x235 mm Square 9610517001

6106/17 60 mm 20x235 mm Square 9610617200

6106/17 60 mm 20x235 mm Square Auxilliary latch DIN LH 9610627201

6106/17 60 mm 20x235 mm Square Auxilliary latch DIN RH 9610627202

6107/17 60 mm 20x235 mm Square 9610717001

6107/17 60 mm 20x235 mm Square Auxilliary latch DIN LH 9610727201

6107/17 60 mm 20x235 mm Square Auxilliary latch DIN RH 9610727202

6108/17 60 mm 20x235 mm Square 9610817000

6109/17 60 mm 20x235 mm Square 9610917001

Article Specification Classification according to EN 12209

6100/17Steel forend with stainless steel decoration plate, width 20 mm, sintered latch

3 M 4 1 0 F 6 H C 3 0

3 M 4 1 0 F 2 B C 3 0

37

6600 Serie.Heavy duty project locks.

• Available as - Bath/WC lock 6642. - Sash lock 6602. - Latch 6632. - Dead lock 6622.

• PC-version to take profile cylinder.• Provided for profile cylinder.• Backset 60 mm.• Distance 72 mm (Bath/WC 78 mm).• Steel follower 8 mm.• Front plate stainless steel.• Latch and dead bolt die-cast nickle plated.• Latch reversible.• Lock case zinc-plated.• As per EN12209.• Including strike plate and screws.

6600

Article Specification Classification according to EN 12209

6600Steel or stainless steel forend, width 20 mm or 24 mm, zamak or sintered latch

3 M 4 1 0 F 6 H C 3 0

3 M 4 1 0 F 2 B C 3 0

Type Backset Front plate Shape Article nr.

6602/31 60 mm 20x235 mm Rounded 9660231001

6602/32 60 mm 20x235 mm Square 9660232001

6602/32 60 mm 24x235 mm Rounded 9660235001

6602/36 60 mm 24x235 mm Square 9660236001

6622/31 60 mm 20x235 mm Rounded 9662231000

6622/32 60 mm 20x235 mm Square 9662232000

6622/35 60 mm 24x235 mm Rounded 9662235000

6622/36 60 mm 24x235 mm Square 9662236000

6632/32 60 mm 20x235 mm Square 9663232001

6632/35 60 mm 24x235 mm Rounded 9663235001

6632/36 60 mm 24x235 mm Square 9663236001

6642/31 60 mm 20x235 mm Rounded 9664231001

6642/32 60 mm 20x235 mm Square 9664232811

6642/35 60 mm 24x235 mm Rounded 9664235001

6642/36 60 mm 24x235 mm Square 9664236001

38

D150.PZW Mortise glass door lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 72 mm.• Follower 8 mm.• Front plate alu finish lacquered.• Single throw dead bolt.• Latch and dead bolt zinc-plated.• Handed.• Lock case zinc-plated.• Without strike plate.

D150

Type Backset Follower Handing Article nr.

D150 25 mm 8 mm DIN LH 9751500008

D150 25 mm 8 mm DIN RH 9751500009

D150 30 mm 8 mm DIN LH 9751500005

D150 30 mm 8 mm DIN RH 9751500006

D150 35 mm 8 mm DIN LH 9751500002

D150 35 mm 8 mm DIN RH 9751500007

D150 40 mm 8 mm DIN LH 9751500004

D150 40 mm 8 mm DIN RH 9751500003

D150 45 mm 8 mm DIN LH 9751500001

D150 45 mm 8 mm DIN RH 9751500002

39

D301.Narrow style sash lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 18, 20, 22, 25, 30, 35, 40 and 45 mm.• Distance 72 mm.• Follower 8 mm.• Front plate steel zinc-plated.• Single throw dead bolt.• Latch and dead bolt zinc die-cast.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate.

D301

Type Backset Follower Finish Bolts extended Article nr.

D301 18 mm 8 mm Zinc plated 9753010000


D301 20 mm 8 mm Stainless steel 9753010015


D301 22 mm 8 mm Zinc plated 5 mm 9753010011













40

D305.PZW Mortise glass door lock.

• To take profile cylinder.• Backset 18, 20, 22, 25, 30, 35, and 40 mm.• Front plate square steel zinc-plated.• Single throw dead bolt.• Dead bolt zinc die-cast.• None handed.• Lock case zinc-plated.• Without strike plate.

D305

Type Backset Article nr.

D305 18 mm 9753050000

D305 20 mm 9753050001

D305 22 mm 9753050006

D305 25 mm 9753050002

D305 30 mm 9753050003

D305 35 mm 9753050004

D305 40 mm 9753050005

41

D307.Narrow style latch.

• Backset 18, 20, 25, 30, and 35 mm.• Follower 8 mm.• Front plate square steel zinc-plated.• Latch zinc die-cast.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate.

D307

Type Backset Follower Article nr.

D307 18 mm 8 mm 9753070003

D307 20 mm 8 mm 9753070002

D307 25 mm 8 mm 9753070000

D307 30 mm 8 mm 9753070001

D307 35 mm 8 mm 9753070005

42

4128.Narrow style security dead lock.

• To take profile cylinder.• Backset 25, 30, 35, 40 and 45 mm.• Front plate square stainless steel.• Dead bolt steel with security pins.• Single throw dead bolt.• SKG**• Non handed.• Lock case zinc-plated black lacquered. • Without strike plate (P 4228/17).

4128


4128/18 25 mm 9412818250

4128/18 30 mm 9412818300

4128/18 35 mm 9412818350

4128/18 40 mm 9412818400

4128/18 45 mm 9412818450

43

4169.Narrow style security sash lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 92 mm.• Follower 8 mm.• Front plate square stainless steel.• Single throw dead bolt.• Latch steel nickle-plated.• Dead bolt steel nickel-plated with security pins.• SKG**• Non-handed.• Lock case zinc-plated black lacquered.• Without strike plate (P 9600/17).

4169


4169/18 25 mm 8 mm 9416918251

4169/18 30 mm 8 mm 9416918301

4169/18 35 mm 8 mm 9416918351

4169/18 40 mm 8 mm 9416918401

4169/18 45 mm 8 mm 9416918451

44

4185.Narrow style security pivot dead bolt lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 30, 35, 40 and 45 mm.• Front plate square stainless steel.• Pivot dead bolt steel nickel-plated

with security pins.• SKG*• Non-handed.• Lock case zinc-plated black lacquered.• Without strike plate (P 1205H/17).

4185


4185/18 30 mm 9418518300

4185/18 35 mm 9418518350

4185/18 40 mm 9418518400

4185/18 45 mm 9418518450

45

8691/14.Narrow style sash lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35 and 40 mm.• Distance 72 mm.• Follower 8 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt brass.• Handed.• Lock case zinc-plated.• Without strike plate (P8691/12).

8691


8691/14 25 mm 8 mm DIN LH 9869114251

8691/14 25 mm 8 mm DIN RH 9869114252

8691/14 30 mm 8 mm DIN LH 9869114301

8691/14 30 mm 8 mm DIN RH 9869114302

8691/14 35 mm 8 mm DIN LH 9869114351

8691/14 35 mm 8 mm DIN RH 9869114352

8691/14 40 mm 8 mm DIN LH 9869114401

8691/14 40 mm 8 mm DIN RH 9869114402

46

8691/31.Narrow style sash lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 40 mm.• Distance 72 mm.• Follower 9 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt steel zinc-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P8691/12).

8691


8691/31 40 mm 9 mm Non handed 9869131401

47

8741.Narrow style sash lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35 and 40 mm.• Distance 110 mm.• Follower 8 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt brass.• Handed.• Lock case zinc-plated.• Without strike plate.

8741


8741/14 25 mm 8 mm DIN LH 9874114251

8741/14 25 mm 8 mm DIN RH 9874114252

8741/14 30 mm 8 mm DIN LH 9874114301

8741/14 30 mm 8 mm DIN RH 9874114302

8741/14 35 mm 8 mm DIN LH 9874114351

8741/14 35 mm 8 mm DIN RH 9874114352

8741/14 40 mm 8 mm DIN LH 9874114401

8741/14 40 mm 8 mm DIN RH 9874114402

48


• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35 and 40 mm.• Distance 92 mm.• Follower 8 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt brass.• Handed.• Lock case zinc-plated.• Without strike plate (P8691/12).

8691


8791/14 25 mm 8 mm DIN LH 9879114251

8791/14 25 mm 8 mm DIN RH 9879114252

8791/14 30 mm 8 mm DIN LH 9879114301

8791/14 30 mm 8 mm DIN RH 9879114302

8791/14 35 mm 8 mm DIN LH 9879114351

8791/14 35 mm 8 mm DIN RH 9879114352

8791/14 40 mm 8 mm DIN LH 9879114401

8791/14 40 mm 8 mm DIN RH 9879114402

49


• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 92 mm.• Follower 8 and 9 mm.• Front plate stainless steel.• Single throw dead bolt.• Latch and dead bolt zinc die-cast

bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P9500/12 zinc-plated

or P9600/17 stainless steel).

Also available in fire-resistant version. MPA certified, having a 9 mm special follower.Dead bolt is one throw 17 mm. Backset 30, 35 and 40 mm.

9600

Type Backset Follower Bolts extended Fire resistend Article nr.

9601/07 25 mm 8 mm 9960107001

9601/07 25 mm 8 mm 5 mm 9960107011

9601/08 25 mm 9 mm 9960108001

9602/07 30 mm 8 mm 9960207001

9602/07 30 mm 8 mm 5 mm 9960207011

9602/08 30 mm 9 mm 9960208001

9602/08 30 mm 9 mm yes 9960208301

9603/07 35 mm 8 mm 9960307001

9603/07 35 mm 8 mm 5 mm 9960307011

9603/08 35 mm 9 mm 9960308001

9603/08 35 mm 9 mm yes 9960308301

9604/07 40 mm 8 mm 9960407001

9604/07 40 mm 8 mm 5 mm 9960407011

9604/08 40 mm 9 mm 9960408001

9604/08 40 mm 9 mm yes 9960408301

9605/07 45 mm 8 mm 9960507001

9605/08 45 mm 9 mm 9960508001

Classification no.

Article Specification Designation according to EN12209

Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch

2 X 8 1 0 F 2 H A 3 0

Nemef 96xxall other types

Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch

2 X 8 0 0 F 2 H A 3 0

Certificate 9600

Standards: CE Marking, EN 12209

50

9620.Narrow style latch.

• Backset 25, 30, 35, 40 and 45 mm.• Follower 8 mm.• Front plate stainless steel.• Latch zinc die-cast bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P635/12 zinc-plated

or 635/17 stainless steel).

9620


9621/07 25 mm 8 mm 9962107001

9622/07 30 mm 8 mm 9962207001

9623/07 35 mm 8 mm 9962307001

9624/07 40 mm 8 mm 9962407001

9625/07 45 mm 8 mm 9962507001

Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0


51

9630.Narrow style night latch.

• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 92 mm.• Follower 8 mm.• Front plate stainless steel.• Latch bolt zinc die-cast bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P635/12 zinc-plated

or 635/17 stainless steel).

9630


9631/07 25 mm 8 mm 9963107001

9632/07 30 mm 8 mm 9963207001

9633/07 35 mm 8 mm 9963307001

9634/07 40 mm 8 mm 9963407001

9635/07 45 mm 8 mm 9963507001

Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0


52

9640.Narrow style dead lock (small case).

• To take profile cylinder.• Backset 25, 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw dead bolt.• Dead bolt zinc die-cast bright nickel-plated.• Non-handed.• Lock case zinc-plated.• Without strike plate (P636/12 zinc-plated


9640


9641/07 25 mm 9964107000

9642/07 30 mm 9964207000

9643/07 35 mm 9964307000

9644/07 40 mm 9964407000

9645/07 45 mm 9964507000

Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0


53

9650.Narrow style dead lock (large case).

• To take profile cylinder.• Backset 25, 30, 35, 40 and 45 mm.• Front plate stainless steel.• Dead bolt die-cast bright nickel-plated

with security pin.• Non-handed.• Lock case zinc-plated.• Without strike plate (P636/12 zinc-plated


9650


9651/07 25 mm 9965107000

9652/07 30 mm 9965207000

9653/07 35 mm 9965307000

9654/07 40 mm 9965407000

9655/07 45 mm 9965507000

Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0


54

9660.Narrow style pivot dead bolt lock.

• To take profile cylinder.• Backset 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw dead bolt.• Pivot dead bolt steel zinc-plated.• Non-handed.• Lock case zinc-plated.• Without strike plate (P1205H/17l).

9660


9662/07 30 mm 9966207000

9663/07 35 mm 9966307000

9664/07 40 mm 9966407000

9665/07 45 mm 9966507000

Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0


55

9670.Narrow style panic lock.

• To take profile cylinder.• Key action on latch bolt.• Backset 30, 35, 40 and 45 mm.• Distance 92 mm.• With one-piece follower 8 and 9 mm.• With two-piece follower 8 and 9 mm. (=handed).• Front plate stainless steel.• Single throw dead bolt.• Latch and dead bolt zinc die-cast

bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P9500/12 zinc-plated

or P9600/17 stainless steel).• Locks having 9 mm follower are fire-resistant,

MPA certified.

9670


9672/07 30 mm 8 mm bolt through 9967207001

9672/07 30 mm 8 mm splitted DIN LH 9967207201

9672/07 30 mm 8 mm splitted DIN RH 9967207202






















Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0

Standards: CE marking, EN 12209 and EN 179

56

9680.Narrow style roller bolt lock.

• To take profile cylinder.• Key action on roller bolt.• Backset 25, 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw dead bolt.• Adjustable roller bolt brass nickel-plated.• Dead bolt die-cast bright nickle-plated.• Non-handed.• Lock case zinc-plated.• Without strike plate

9680


9681/07 25 mm 9968107000

9682/07 30 mm 9968207000

9683/07 35 mm 9968307000

9684/07 40 mm 9968407000

9685/07 45 mm 9968507000

Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0


57

9690.Narrow style pivot hook bolt lock.

• To take profile cylinder.• Key action on hook bolt.• Backset 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw hook bolt.• Hook bolt steel zinc-plated • With/without security pin.• Extra security pin which makes it

impossible to lift the door.• Non-handed.• Lock case zinc-plated.• Without strike plate (P1205H/17).

9690

Type Backset Security pin Article nr.

9692/07 30 mm With 9969207000

9692/07 30 mm Without 9969207100

9693/07 35 mm With 9969307000

9693/07 35 mm Without 9969307100

9694/07 40 mm With 9969407000

9694/07 40 mm Without 9969407100

9695/07 45 mm With 9969507000

9695/07 45 mm Without 9969507100

Certificate 9600

Classification no.



2 X 8 1 0 F 2 H A 3 0



2 X 8 0 0 F 2 H A 3 0


58

Strike plates.

Type Shape Finish Handing Article nr.

D001 Rounded Alu finish lacq. DIN LH 9750019004

D001 Rounded Alu finish lacq. DIN RH 9750019005

D001 Square Alu finish lacq. DIN LH 9750019006

D001 Square Alu finish lacq. DIN RH 9750019007

D001 Rounded Stainless steel DIN LH 9750019002

D001 Rounded Stainless steel DIN RH 9750019003

D001 Square Stainless steel DIN LH 9750019000

D001 Square Stainless steel DIN RH 9750019001

D032 Square Alu finish lacq. 7-7-7 9750329002

D032 Square Alu finish lacq. 10-12-10 9750329004

D032 Square Stainless steel 10-12-10 9750329003 D001

D032

Hole template 7-7-7

D032

Hole template 10-12-10

for countersunk wood screw

3.5 DIN

97

for countersunk wood screw

3.5 DIN

97

for c

ount

ersu

nk w

ood

scre

w 3

.5 D

IN 9

7

thic

k

p lastic lining

plastic lining

Strike plates.

59

P6602 (rounded and square)


Type Shape Finish Article nr.

P 6109/17 Square Stainless steel 9610990170

P 6602/17 Rounded Stainless steel 9660290175

P 6602/17 Square Stainless steel 9660290170

P 6622/12 Rounded Steel zinc-plated 9662290125

P 6622/17 Rounded Stainless steel 9662290175

P 6632/12 Rounded Steel zinc-plated 9663290125

P6109 (square)


60

Strike plates.

P7000 and HP7000 (rounded and square)

Fitting D140, D141, D147, D196, D197, D540 and D541

P7002 and P7003 (rounded and square)

Type Shape Finish Handing Article nr.

P 7000/17 Rounded Stainless steel Non-handed 9700090175

P 7000/17 Rounded Stainless steel DIN LH 9700090176

P 7000/17 Rounded Stainless steel DIN RH 9700090177

P 7000/17 Square Stainless steel DIN LH 9700090171

P 7000/17 Square Stainless steel DIN RH 9700090172

HP 7000/17 Rounded Stainless steel Non-handed 9700090275

HP 7000/17 Rounded Stainless steel DIN LH 9700090276

HP 7000/17 Rounded Stainless steel DIN RH 9700090277


P 7002/17 Square Stainless steel Non-handed 9700090170


P 7003/17 Square Stainless steel Non-handed 9700390170

P 7200/17 Rounded Stainless steel DIN LH 9720090176

P 7200/17 Rounded Stainless steel DIN RH 9720090177

P 7200/17 Square Stainless steel DIN LH 9720090171

P 7200/17 Square Stainless steel DIN RH 9720090172 P7200 (rounded and square)

61

Strike plates.

Art. P 635/12 or P 635/17

Strike plates for 9620 and 9630 Series

Art. P 636/12 or P 636/17


Art. P 1205H/17


Art. P 8691/12

Strike plates for 8600 Series

62

Art. P 9500/12


P 9600/17


ASSA ABLOY is theglobal leader in door pening solutions, dedicated to satisfyingend-user needs for security,safety and convenience

9999990377 / JTP - 02/2016

ASSA ABLOY Nederland B.V.P.O. Box 13, 7300 AATweelingenlaan 487324 AN ApeldoornThe Netherlands

Tel. +31 88 639 48 00Fax +31 88 639 49 [email protected]

inner door locks. project locks. - nemef

Documents