innovative lock and door products - absupply.netease. features a non-slip handle grip, impact slider...
TRANSCRIPT
Innovative Lock and Door Products
GKL PRODUCTS CATALOG MARCH 2017
From the Makers of
THE HINGE DOCTOR
The Hinge Doctor® is the time saving, hinge restoration tool you have been looking for.
Sagging doors are repaired in seconds with the turn of a wrench! Hinge Doctors® are available in handy kits or individually. #HA1D #HA3D #HA4D
Commercial butt hinges
Ball bearing hinges
Prison & spring hinges
#HA1D #HA3D #HA4D
“REPAIR SAGGING DOORS IN 15 SECONDS”
#HA2 (The Hulk)
Fits residential interior and exterior hinges
#HA2
#HA2AD #HA2BD #HA2BDX4
Residential interior hinges
Residential exterior hinges
Residential exterior 4” hinges
WW#HA2AD #HA2BD #HA2BDX4
®
#HA1-4D KIT
For commercial, institutional and residential applications. Includes all three commercial Hinge Doctor® sizes HA1D, HA3D, HA4D along with the HA2 for residential applications.
#HA1-4D KIT
#HA1-3D KIT
For commercial and residential applications. Includes the HA1D and HA3D along with the HA2 for residential applications.
#HA1-3D KIT
#HA134D KIT
For commercial and institutional applications. Includes all three commercial Hinge Doctor® sizes: HA1D, HA3D, HA4D
#HA134D KIT
#HA2X2D KIT
For residential applications. Includes HA2AD & HA2BD
#HA2X2D KIT
#HA2X3D KIT
For residential applications. Includes HA2, HA2AD & HA2BD
#HA2X3D KIT
COMMERCIAL 12/14 WOOD
A No.12 Phillips under cut head with a No.14 oversized body. Replace stripped out hinge and strike plate screws in wood doors and frames.
HINGE SCREWS “SPECIAL HINGE SCREWS FOR STRIPPED OUT FRAMES”
COMMERCIAL 12/14 METAL
Self-drilling, self-taping No.14 screws with No.12 Phillips undercut flat head. Replace stripped out hinge, strike plate and door closer screws in steel doors and frames.
RESIDENTIAL 9/11 WOOD
A No.9 Phillips under cut head with a No.11 oversized body. Replace stripped out hinge and strike plate screws in wood doors and frames.
Bright Brass#HSP50WSBBR (50Pkg) #HSP100WSBBR (100Pkg)
Satin Brass#HSP50WSSBR (50Pkg) #HSP100WSSBR (100Pkg)
Satin Nickel#HSP50WSSNR (50Pkg) #HSP100WSSNR (100Pkg)
Antique Brass#HSP50WSABR (50Pkg)#HSP100WSABR (100Pkg)
Oil Rubbed Bronze#HSP50WSOBR (50Pkg)#HSP100WSOBR (100Pkg)
Black Oxide#HSP10MB (10Pkg) #HSP50MB (50Pkg) #HSP100MB (100Pkg) #HSP500MB (500Pkg)
Nickel Plated #HSP10W (10Pkg) #HSP50W (50Pkg) #HSP100W (100Pkg) #HSP500W (500Pkg)
Black Oxide#HSP10WB (10Pkg) #HSP50WB (50Pkg) #HSP100WB (100Pkg) #HSP500WB (500Pkg)
Yellow Zinc#HSP10WYZ (10Pkg) #HSP50WYZ (50Pkg) #HSP100WYZ (100Pkg) #HSP500WYZ (500Pkg)
Nickel Plated#HSP10M (10Pkg) #HSP50M (50Pkg)#HSP100M (100Pkg) #HSP500M (500Pkg) #HSP100M - SHORT (100Pkg) #HSP500M - SHORT (500Pkg)
#MS1 (MEGA SCREWDRIVER)
The 24 inch MEGA Screwdriver / Impact Driver has the power to break rusty and
corroded screws loose and remove them with ease. Features a non-slip handle grip, impact
slider and a quick change chuck that allows the use of any standard quick change bit.
#SV1 (VARIETY HINGE SCREW KIT)
Our complete set of residential and commercial hinge screws.
#SV1
HSP10MB x 10
HSP10W x 10
HSP10WYZ x 10
B1 SCREW PACK (2 SETS)
EXPANSION x 10
EXPANSION x 10
HSP10WB x 10
HSP10M x 10
HSP10M - SHORT x 10
BRACKET METAL SCREWS FOR ADD1 x 10
FACEPLATE SCREWS - DARK BRONZE x 75
FACEPLATE SCREWS - STAINLESS STEEL x 75
HSP10WSABR x 10
HSP10WSBBR x 10
HSP10WSOBR x 10
HSP10WSSBR x 10
HSP10WSSNR x 10
#6 METAL SCREW FOR BRIDGE x 10
FACEPLATE SCREWS
#HSPFPA (Clear Aluminum)
#HSPFPD (Dark Bronze)
#MS1
STOREFRONT DOOR PRODUCTS “REPAIR OR MODIFY STOREFRONT DOORS WITH A TWIST”
All it takes is a twist of the special key to snap the bridge® into an aluminum framed, narrow stile storefront door. Done in about 10 seconds and ready to accept an MS lock deadbolt, dead latch or a faceplate.
#B1A (STOREFRONT DOOR MODIFICATION KIT)
For faceplate installation on storefront doors when fitting with a panic bar or exit device.
Include 3 snap-in Bridges®, 2 blank faceplates (beveled and radius), screws, shims to adjust faceplate height, 1 ADD2A hole filler disc kit and brackets to convert kit to ADD1A disc kit.
#B1A (Clear)
#B15 (SNAP-IN BRIDGE®)
A quick twist with the Spanner Key and it’s in place and ready to accept a lock or faceplate.
#B15
#SK1 (SPANNER KEY)
Use this pocket-sized tool to install the Bridge® or any hole filler discs.
#SK1
#B1D (STOREFRONT DOOR MODIFICATION KIT)
For faceplate installation on storefront doors when fitting with a panic bar or exit device.
Include 3 snap-in Bridges®, 2 blank faceplates (beveled and radius), screws, shims to adjust faceplate height, 1 ADD2D hole filler disc kit and brackets to convert kit to ADD1D disc kit.
#B1D (Dark Bronze)
#SB1 (STOREFRONT DOOR STARTER KIT)
For lock installation on storefront doors when installing new MS locks or replacing stripped out MS lock mounting screws with GKL Bridges®.
Includes a spanner key, 4 snap-in Bridges®, screws and shims. (2 optional screws are included for each Bridge® for additional stability and holding power if needed)
DISC WITH BRACKETS
Slip the bracket into the hole and tighten the disc with the handy SK1 spanner key. Discs are 1 5/8” in diameter. Includes two discs, two brackets and two screws.
#ADD1A (Clear) #ADD1D (Bronze)
DISC WITH THREADED ROD
Simply screw the two two discs onto the threaded rod. Discs are 1 5/8” in diameter. Includes two discs and one threaded rod.
#ADD2A (Clear) #ADD2D (Bronze)
LARGE DISC WITH BRACKETS
Metal discs are 2 5/8” in diameter. Includes two discs, two brackets and two screws.
#LDD1A (Clear) #LDD1D (Bronze)
LARGE DISC WITH THREADED ROD
Metal discs are 2 5/8” in diameter. Includes two discs and one threaded rod.
#LDD2A (Clear) #LDD2D (Bronze)
#ADD1A
#ADD1D #ADD2A #ADD2D
#LDD1A#LDD2A #LDD2D
#LDD1D
#SB1
MAIL SLOT COVERS
These sturdy painted aluminum covers are used to provide mail slot security. Installation is simple and assured. Each mail slot cover comes with a convenient paper template to insure a proper fit. Metal templates are also available.
#MSCA (Clear)
#MSCD (Dark Bronze)
#MST (Template)
THE GRIMESTOPPER
The GS lock protector prevents moisture and dirt from entering the key way. Euro styles available for special order.
#GS-LDB (Large Diameter Base)
#GS-C/L (Camlock)
#GS-M/R (Mortise & Rim)
The GS-SPCR KIT includes two spacers and is for use with long mortise and rim cylin-ders.
#GS-SPCR KIT
#GS-LDB #GS-C/L #GS-M/R
#GS-SPCR KIT
#MSCA
#MSCD
#MST
FACEPLATES
Custom blank faceplates cover the cavity left by a lock removal when fitting the door with a panic bar or exit device.
#FPRA (Radius/Round)
#FPFA (Flat)
#FPBA (Beveled)
#FPRD (Radius/Round)
#FPFD (Flat)
#FPBD (Beveled)
#BV1 (STOREFRONT DOOR KIT)
The complete set for faceplate installation on storefront doors when fitting with a panic bar or exit device.
#BV1
ADD1A HSP10W SCREWS B1 SCREW PACK (2 sets)
B15 - SNAP IN BRIDGE x 6
ADD1D ADD1 BRACKETS (2 sets)
HSP10M SCREWS FPRA - RADIUS FACEPLATE FPRD - RADIUS FACEPLATE
ADD2A + Extra Rod
ACORN NUTS FOR MSCA/MSCD x 4
FACEPLATE SCREWS - STAINLESS STEEL x 75
FPFA - FLAT FACEPLATE FPFD - FLAT FACEPLATE
ADD2D + Extra Rod
ADD2 THREADED RODS x 4
FACEPLATE SCREWS - DARK BRONZE x 75
FPBA - BEVELED FACEPLATEFRBD - BEVELED FACEPLATE
#DL2 (DOOR LIFTER)
Save your back and install doors in a snap with our Door Lifter. Place the Door Lifter beneath the door and easily lift the door into position by simply stepping on the lifter handle. Never leave the sWhop without it.
#DL2
PAINT PENS
#PP1 (Dark Bronze) #PP2 (Aluminum) #PP1-2 KIT (Dark Bronze & Aluminum)
#HS1 (OVERBORING JIG)
The Hole Saw Alignment Guide enables you to re-bore an existing 1.5” diameter hole and turn it into a 2-1/8” diameter (or larger) hole without the use of plywood, “C” clamps, measuring centers or drill fixtures. Hole saw not included.
#HS1
#MGF3 (MAGNETIC FINGER GLOVE)
The MGF3 is a lightweight glove designed for the user who prefers the feel of a slightly thinner glove that provides maximum dexterity.
#MGF3
#HAS1 (SPREADER WEDGE)
Spreader wedge for regular and continuous hinges.
#HAS1
#MGF1 (MAGNETIC FINGER)
The MGF1 features a powerful magnet in the tip which allows you to hold and retrieve small metal objects with precise control.
#MGF1 (Front) #MGF2 (Tip)
UNIVERSAL DOOR HANDLE
#UH1A628 (Clear)
#UH1D313 (Bronze)
#HL1 (HERCULOCK EMERGENCY DOOR LOCK)
Easily secures Herculite doors. This emergency door lock installs in minutes for late night door lock-up. A quick fix for failed Herculite door locks.
#HL1
#UH1A628
#UH1D313
#MGF1#MGF2
GKL DISTRIBUTORS
Alabama S&L Door Control Services (800) 633-3214Alberta Shanahan’s Building Specialties (780) 489-5444Arizona Hawley Lock & Supply (800) 398-2458 IDN West (602) 272-5300Intermountain Lock Supply (877) 438-6068British Columbia DG MacLachlan Ltd (604) 294-6000Associated Lock & Supply (800) 668-7161 McGregor Hardware Distributors(877) 242-8085California Access Hardware Supply (510) 483-5000Clark Security San Diego (844) 522-5275Construction Hardware (909) 594-9093Dale Hardware (510) 797-3253DWS - Demountable Wall Supply (510) 797-4584Forderer Cornice Works (510) 783-4200General Hardware (650) 368-2885J&J Door Closer Service Inc (800) 310-9799Montgomery Hardware (877) 917-0113Robert Skeels & Company (310) 639-7240US Lock (904) 421-1400IDN Wilco Supply (800) 745-5450District of Columbia Blaydes Industries (202) 832-7100Florida IDN Armstrongs (813) 886-8007Locks Company (800) 288-0801Professional Installations Group (954) 448-6872Southern Lock Supply (800) 282-2837Hawaii Island Pacific Distributors Inc. (808) 955-1126Idaho Architectural Building Supply (208) 523-6484Illinois Ewert Inc. (708) 597-0059IDN H Hoffman (708) 456-4300Iowa M & G Distributors (712) 336-8886Kansas Smallwood Lock Supply (888) 881-4245Kentucky Lockmasters (800) 654-0637Maryland 1st In Hardware (410) 646-9900Massachusetts Commonwealth Lock Co. (617) 876-3301Stone & Berg Wholesale Locksmith Supply (800) 225-7405 Michigan IDN Hardware Sales (734) 591-1150Minnesota Doyle Security Products (800) 333-6953Twin City Hardware (651) 731-7134
Nebraska Johnson Hardware (402) 444-1650 Nevada IDN West (602) 272-5300Nevada Lock Supply (702) 737-0500New Jersey Accredited Lock Supply (800) 652-2835Bell’s Security Sales Inc (800) 772-2266Craftmaster Hardware (201) 768-0808Denville Hardware (973) 627-2800New York Mayflower Sales (800) 221-2052Maziuk Wholesale Distributors (800) 777-5945North Carolina Seven Oaks Doors & Hardware (704) 485-2014Southern Lock Supply (888) 571-9145Hardware Distributors Inc (800) 632-1324Ohio Job Specialty Tools (513) 317-5628Ontario Edwards Builders Hardware (416) 231-3326Hardware Agencies Ltd. (416) 462-1919Rivett Architectural Hardware Ltd (905) 668-4455Addalock Inc. (905) 850-9600Oregon Chown Hardware Sales Inc. (800) 547-1930H.E. Mitchell Co. Inc. (503) 236-9444Wholesale 4 Inc. (800) 547-0921Pennsylvania Fried Bros (215) 627-3205IDN Hardware Sales (866) 436-1499Independent Hardware Inc. (215) 925-5306Quebec Outils, Pierre, Berger (450) 444-3882YAF (514) 817-7298Rhode Island Glass America (401) 349 3800South Carolina Southpaw Wholesale (864) 877-8643Tennessee IDN Acme (972) 664-1240McDonald Dash (800) 238-7541Texas American Door Products (713) 681-8047 Fairway Supply (877) 309-6300H.L. Flake (800) 231-4105Hans Johnsen Co. (888) 879-1500Wholesale Services (972) 878-6650Utah Robert I Merrill Co. (801) 263-2700Virginia Tweeds (800) 544-4482Cook and Boardman (757) 298-6395Washington KDL Hardware (206) 682-7383McGregor Hardware Distributors (206) 242-8085Wisconsin Door Hardware Distributors (800) 829 8905Foley Belsaw (816) 483-6400
GKLproducts.com
GKL ProductsP.O. Box 533Herald, CA 95638 Monday thru Friday 9:30 to 5:30 PST
Tel: (888) 446-4337Fax: (209) 748-2405Email: [email protected]