Innovators in Valve Testing

Test units for all types of;

Shut-off valves

Safety (relief) valves

Control valves

‘Valves often play

a key role in the

industrial installation.

Still 50-60% of the

fugitive emission of

industrial installations is

caused by leaking valves’

Shut-off valves

Vent i l Test Equipment de l i vers test units for testing any type of Gate-, Globe-, Plug-, Ball-,Check-, Slide- and Butterfly valve wi th f l ange - , t h r ead o r we ld connections 1⁄4 - 86” / DN6 – 2200 mm. Manual operated or fully automatic test systems for body and seat testing with; Liquid test systems 0-1500 bar / 21,750 PSI. Gas test systems 0-500 bar / 7,250 PSI.

1

Valve Production Testing

Fully automatic test units for quick and efficient testing a series of valves. Ventil IT specialists design smart software for the test- & operation system. The fully integrated computer system assures a very simple operation procedure. The test- & operation system controls the test procedure and a combination of accurate pressure sensors and flow meters detect / measure any leakage. The software compares the found test results with the program-med test standard. Within seconds the system gives a ‘pass’ or ‘fail’ signal.

‘Our experienced engineering

and designing department is

responsible for customizing

standard products or design

custom built test units to meet

the divers requirements of

valve manufacturers’

22

‘Valves often play a key tole om the in-dustrial intallation. Still 50-60% of the fugitive emission of in-

dustrial installations is caused

by leaking valves

Safety valves

Analogue, digital or semi-automat ic ( computer i zed) test systems for testing and (re)adjusting the set pressure, blow down, re-seating pres-sure and seat tightness, with gas or l iquid test systems 0-1000 bar / 14,500 PSI. Pressure – vacuum test systems for breather valves and other tank safety’s up to 24”.

3

No plant shut-down

No dismantling of the valve

No loss of productivity!

No loss of profitability!

PrevenTest On-line testing

The Venti l PreVenTest system is a robust,but ingenious build system for testing all types and sizes of spring operated safety valves on line, in process and under the normal operating condit ions. The portable system enables you to proof the correct working and performance or identify safety valves in need of repair without plantshut-down.

‘Obviously, the most

desirable type of test

is one that subjects the

Safety Valve to the full

operating conditions that

it is to endure in practice’.

Atex Explosion Proof

4

Control valves

Wide range of clamping and test systems for high pressure testing, seat leakage classification and total performance testing of all types of control valves up to 36” / DN900 mm. The horizontal or tilting clamping systems are completed with proportional controls to prevent stress and deformation of the valve body. Besides controlling of the test procedure and printing a full size test certificate, the CRS software also calculates the ‘allowable’ seat leakage according to the international standards.

5

Emmission – leak detection

Increasing fugitive emission standards require new, modern leak detec-tion equipment using a tracer gas. Ventil offers you the right Helium or Hydrogen leak detector for finding leaks up to 10-9 in ambient or cryogenic circumstances. The Helium mass spectro-meter leak detectors or the advanced Hydrogen leak detector are available, portable unit or can be fully integrated in the (Control) valve test.

Accessoires

Valve repair equipment Ventil Subsidiary V-tec offers a wide variety of valve grinding and lapping machines, covering the range of virtually every valve type DN10 to 1200 mm./ 1⁄4” – 48” in diameter. The unique range of light weight machines are portable and designed to be used on any location in all working circum-stances at high degree of accuracy.

www.valve-grinding.com

Transportable valve workshops Fully equipped test- & repair facility’s for on-site overhaul and test-ing of Shut-off valves, Safety valves and Control valves. The 10, 20 or 40 ft. containers feature all necessary tools and equipment for the standard reconditioning procedure, but can also be equipped according to your spe-cific needs, application and the envi-ronment / climate conditions it needs to be used in. In case of off-shore use, the new fabricated container is equipped and certified according to BS EN 12079: 2006 & DNV Standard for Certification 2.7-1 (2006) and can be used in explosive zones.

6

W

Ventil Test Equipment B.V.Polakweg 62288 GE RijswijkThe NetherlandsT: +31 (0) 70 3209327F: +31 (0) 70 3203737 I: www.ventil.nlE: info@ventil.nl

Innovators in Valve Testing

Meet Ventil

For more than 45 years Ventil Test Equipment is dedicated to the design and manufacturing of high quality test units for pressure testing valves. An unrivalled commitment to quality and performance, continuous development and innovating in close cooperation with our clients, have brought us where we are today; World’s leading manufacturer of high pressure test equipment for industrial valves. Ventil test units are being used by valve manufacture- and repair companies in over 60 country’s world wide.

Ventil USA3303 Airline BLVD - Suite 4APortsmouth, VA, 23701 United States of AmericaT: 757 9662307F: 757 9661926I: www.ventil-usa.comE: sales@ventil-usa.com