inspection: telescoping boom...

Inspection Report: TELESCOPING BOOM CRANE-ANNUAL OSHA/ANSI/ASME Standards: OSHA 1926.1400, 1910.180,1926.601 ASME B30.5,B30.10

Date Inspected: 06/20/2019 Operation Hours: 1,954. upper Operation Miles: 21,957.

Inspector: Steve Marquis Inspection ID: 88.577.1561338171

Equipment Identification and SpecificationsName and Address of Owner SHERMAN CRANE; 140 West Street , Wilmington MA 01887 USASerial Number 066-511 Unit Number: 181Year 2014 Manufacturer LIEBHERRModel LTM-1130-5.1Max Capacity 305,000 lbsMain Hoist Rope Diameter 21 mmMain Hoist Rope Type rotation resistant

Did the unit pass the inspection? Yes

No

X Do you want to attach an annual certification to this unit? Yes

No

X

Unit Location at Time of Inspection: Wilmington, MA

GPS Tag:

Inspector

Steve Marquis

Enso Crane Services 603-781-7795 Company Owner: Perry, StephenP.O. Box 671 Contact: Perry, Stephen

Generated on 06/24/2019 - 01:02:51 GMTDover NH 03821U.S.A. http://www.ensocrane.com Pg 1 of 9

Inspection DetailsType of Inspection: TELESCOPING BOOM CRANE-ANNUAL 88.577.1561338171Inspection ID:

S=Satisfactory R=Recommendation D=Deficiency N=Not Applicable

Item Condition Item Condition

TELESCOPING BOOM CRANE-ANNUAL CRANE DATA1. Inspection Records Daily / Monthly / Annual S2. Maintenance Records S3. Wire Rope Inspection Records S4. Ground Conditions SGENERAL CONDITION5. Sheet Metal S6. Paint Condition / Corrosion Control S7. Guards / Covers S8. External Lights S9. Housekeeping S10. Warning / Safety Labels S11. OSHA Approved Hand Signal Chart (outside) SPOWER PLANT (LOWER)12. Engine / Pumps Performance S13. Exhaust System / Guards & Insulators S14. Belts / Pulleys S15. Hoses S16. Compressor Performance S17. Guards / Covers for Rotating Parts S18. Engine Oil Level S19. Transmission Oil Level S20. Coolant Level S21. Leaks SDRIVERS CAB / STATION (LOWER)22. Brakes Service / Parking S23. Headlights / Trail Lights S24. Brake Lights / Turn Signals S25. Back-up Alarm / Lights S26. Audible Warning (low air) S27. Glass S28. Windshield Wipers S29. Heater / Defroster S30. Seat Belts S31. Steering S

32. Fire Extinguisher S33. Gauges / Light Display S34. Access / Grab Rails / Steps S35. Mirrors S36. Power Take-Off S37. Air Pressure S38. Horn S39. Accelerator S40. Operators Manual SCARRIER / DRIVETRAIN COMPONENTS41. Engine Mounts / Bolts S42. Transmission Mounts / Bolts S43. Drive Line S44. U-Joints S45. Main Frame Members S46. Axle Mounts S47. Hydraulic Hoses S48. Hydraulic Tubing S49. Hydraulic Fittings S50. Hydraulic Fluid Level S51. Axle Lockout System S52. Differential Breathers S53. Tires / Wheels Condition S54. Tire Inflation Pressure SOUTRIGGERS55. Boxes S56. Beams S57. Cylinders / Extensions & Stabilizers S58. Floats / Pads S59. Hydraulic Hoses S60. Hydraulic Tubing S61. Hydraulic Fittings S62. Pilot Operated Check Valves S63. Positive Position Locks S64. Decals / Warning Labels S65. Beam Marking S






RATED CAPACITY CHART66. Correct Capacity Chart for Crane S67. Legible / Durable S68. Secured / Accessible to Operator SOPERATIONAL AIDS69. Boom Angle Indicator S70. Boom Length Indicator S71. Anti Two Block / Device / Warning S72. LMI Make & ModelLICCON II73. Load Moment Indicator S74. Load Radius Indicator S75. Load Weight Indicator S76. Main Hoist / Winch Rotation Indicator SOPERATORS CAB / STATION77. Glass / Safety Type S78. Windshield Wipers / Washers S79. Cab Access / Steps / Ladders S80. Hand holds / Guardrails S81. Anti Slip Walking Surfaces S82. Door Latch / Lock / Restraint S83. Fire Extinguisher 10BC S84. Operators Manual S85. All Safety Decals S86. Electrocution Warning S87. Level Indicator S88. Horn S89. Gauges / Light Display S90. Crane Function Controls S91. Crane Function Controls Identified S92. Swing Brake / Lock S93. Travel Brakes S94. Travel Mechanism S95. Travel Controls S96. Park Brake S97. Low Boom Warning S

POWER PLANT (UPPER)98. Engine / Pumps Performance S99. Exhaust System / Guards & Insulators S100. Belts / Pulleys S101. Hoses S102. Guards / Covers for Rotating Parts S103. Engine Oil Level S104. Transmission Oil Level S105. Coolant Level S106. Leaks SROTATING SUPERSTRUCTURE107. Turntable / All Structural Welds S108. Turntable Mounting Bolts S109. Directional Control Valves S110. Hydraulic Hoses S111. Hydraulic Tubing S112. Hydraulic Fittings S113. Hydraulic Pressure / Relief Valves S114. Electrical Wiring S115. Swing / Slew Gearbox S116. Slewing / Rotation Bearing S117. Counterweight / Welds / Attachment Area S118. Safety / Warning Labels S119. Main Hoist mounting Bolts S120. Auxiliary Hoist Mounting Bolts S121. Wire Rope Lay on Main Hoist SMAIN BOOM122. Boom Length41 - 196 ft123. Lift Cylinder(s) S124. Telescoping Cylinder(s) S125. Holding Device / Holding Valves S126. Hydraulic Hoses S127. Hydraulic Tubing S128. Hydraulic Fittings S129. Boom Wear Pads S






130. Boom Section Alignment S131. Equal Extension / Boom Sequence S132. Condition of Sheaves S133. Hoist Line Retainers / Pins S134. Condition of Boom Structure S135. Condition of Boom Head SLATTICE BOOM EXTENSION136. Condition of Main Chords and Lacings S137. Condition of Mounting Pins / Keepers S138. End Connection / Attachment Points S139. Condition of Sheaves S140. Stowage Brackets Front / Rear S141. Boom Extension Alignment S142. Wire Rope Retainers / Pins S143. Condition of Welds S144. Positive Stops S145. Length of Jib35 ft offsetSOLID DESIGN BOOM EXTENSION146. Condition of Boom Extension S147. Condition of Mounting Pins / Keepers S148. End Connection / Attachment Points S149. Condition of Sheaves S150. Stowage Brackets Front / Rear S151. Boom Extension Alignment S152. Wire Rope Retainers / Pins S153. Condition of Welds S154. Positive Stops S155. Length of Jib27 ft SAWLOAD BLOCK AND HOOKINFORMATION156. ManufacturerLIEBHERR157. Serial Number916124908-E158. Rated Capacity30 mt

159. Block Weight450 kg160. Hook Tram Measurementn/aITEM161. Capacity Marking S162. Weight Marking S163. Sheave(s) S164. Safety Latch S165. 0 Degree Hook Bend or Twist S166. 5% Hook Throat Opening or 1/4 inch S167. 10% Hook Wear S168. Bearing S169. Pins and Retainers S170. Reeving S171. Wedge Socket / End Fitting SOVERHAUL BALL AND HOOKINFORMATION172. ManufacturerLIEBHERR173. Serial Number914231008-E174. Rated Capacity10 mt175. Ball Weight250 kg176. Hook Tram Measurementn/aITEM177. Capacity Marking S178. Weight Marking S179. Safety Latch S180. 0 Degree Hook Bend or Twist S181. 5% Hook Throat Opening or 1/4 S182. 10% Hook Wear S183. Bearing S






OTHER NOTES184. stowed on craneMAIN HOIST WIRE ROPEINFORMATION185. Damage S186. Wear S187. Broken Wires S188. Lubrication S



Image 1



Image 2



Notes Inspection ID: 88.577.1561338171Explanation

170: ITEM - Reeving: 2 parts

8: GENERAL CONDITION - External Lights: LMI lights

69: OPERATIONAL AIDS - Boom Angle Indicator: accuracy confirmed with a digital level

73: OPERATIONAL AIDS - Load Moment Indicator: LMI functions as designed.

74: OPERATIONAL AIDS - Load Radius Indicator: accuracy confirmed with a tape measure

75: OPERATIONAL AIDS - Load Weight Indicator: accuracy acceptable with a known weight



Annual CertificationThis is to certify that the unit described below received an TELESCOPING BOOM CRANE-ANNUAL in accordance with

OSHA 1926.1400, 1910.180,1926.601 ASME B30.5,B30.1

Equipment Owner: SHERMAN CRANE

Model No.: LTM-1130-5.1

Equipment Make: LIEBHERR

Serial No.: 066-511

Equipment Type: TELESCOPING BOOM CRANE

Unit Id: 181

Inspection ID: : 88.577.1561338171

Inspected on this: 20th (Thursday) day of June, 2019

by: Enso Crane Services

P.O. Box 671 03821 Dover( NH )

603-781-7795

http://www.ensocrane.com

This Certificate Expires One Year From The Date of Inspection AboveEnso Crane Services 603-781-7795 Company Owner: Perry, StephenP.O. Box 671 Contact: Perry, Stephen


inspection: telescoping boom...

Documents